Using fluorescence spectroscopy EEM to evaluate the efficiency of organic matter removal during coagulation-flocculation of a tropical surface water (Agbo reservoir)

Nanoscale Sequential Reactor Design Achieves Effective Removal of Disinfection Byproduct Precursors in Catalytic Ozonation

Transforming dissolved organic matter (DOM) is a crucial approach to alleviating the formation of disinfection byproducts (DBPs) in water treatment. Although catalytic ozonation effectively transforms DOM, increases in DBP formation potential are often observed due to the accumulation of aldehydes, ketones, and nitro compound intermediates during DOM transformation. In this study, we propose a novel strategy for the sequential oxidation of DOM, effectively reducing the levels of accumulation of these intermediates. This is achieved through the development of a catalyst with a tailored surface and nanoconfined active sites for catalytic ozonation. The catalyst features a unique confinement structure, wherein Mn-N4 moieties are uniformly anchored on the catalyst surface and within nanopores (5-20 Å). This design enables the degradation of the large molecular weight fraction of DOM on the catalyst surface, while the transformed smaller molecular weight fraction enters the nanopores and undergoes rapid degradation due to the confinement effect. The generation of *Oad as the dominant reactive species is essential for effectively reducing these ozone refractory intermediates. This resulted in over 70% removal of carbonaceous and nitrogenous DBP precursors as well as brominated DBP precursors. This study highlights the importance of the nanoscale sequential reactor design and provides new insights into eliminating DBP precursors by the catalytic ozonation process.

Fluorescence spectroscopy in the detection and management of disinfection by-product precursors in drinking water treatment processes: A review

Monitoring and prevention of the formation of disinfection by-products (DBPs) is paramount in drinking water treatment plants (DWTP) to ensure human health safety. This review provides an overview of how fluorescence techniques are developed to predict DBP formation and to evaluate the reduction of fluorescence components and DBPs following individual DWTP processes. Evidence has shown that common DBPs, nitrogenous DBPs and specific emerging DBPs exhibit positive linear relationships with terrestrial, anthropogenic, tryptophan-like, and eutrophic humic-like fluorescence. Due to the interrelationships of both regulated and emerging DBP types with fluorescence components, the limitations arise when attempting to predict emerging DBPs solely through linear relationships. Monitoring the reduction of DBP precursors after each treatment process can be achieved by studying the relationship between fluorescence components and DBPs. During the coagulation process, highest reduction rates are observed for terrestrial humic-like fluorescence. Advanced treatments such as granular, powdered, silver-impregnated activated carbon, magnetic ion exchange resins, and reverse osmosis, have revealed a significant reduction of fluorescent DBP precursors, ranging from 53% to 100%. During chlorination, the reduction rate follows the order: terrestrial humic-like > microbial humic-like > protein/tryptophan-like fluorescence. This review provides insights into the reduction of fluorescence signatures following individual DWTP processes, which offers information regarding DBP formation. These insights could assist in optimizing the treatment process to more effectively manage DBP formation. For the identification of emerging DBP generation, the utilization of advanced models is imperative to precisely predict emerging DBPs and to more accurately trace DBP precursors within DWTPs.

Understanding the influence of dissolved organic nitrogen characteristics on enhanced coagulation performance for water reuse

With the recent focus on using advanced water treatment processes for water reuse, interest is growing for utilizing enhanced coagulation to remove dissolved chemical species. Up to 85% of the nitrogen in wastewater effluent is made up of dissolved organic nitrogen (DON), but there is a knowledge gap regarding its removal during coagulation, which can be influenced by DON characteristics. To address this issue, tertiary-treated wastewater samples were analyzed before and after coagulation with polyaluminum chloride and ferric chloride. Samples were size-fractionated into four molecular weight fractions (0.45 μm, 0.1 μm, 10 kDa, and 3 kDa) using vacuum filtration and ultrafiltration. Each fraction was further evaluated by coagulating it separately to assess DON removal during enhanced coagulation. The size fractionated samples were also separated into hydrophilic and hydrophobic fractions using C18 solid phase extraction disks. Fluorescence excitation-emission matrices were used to investigate the characteristics of dissolved organic matter contributing to DON during the coagulation process. The results showed that DON compounds of size <3 kDa constituted a majority of the total DON. Coagulation removed more than 80% DON from size fractions 0.45 μm-0.1 μm and 0.1 μm-10 kDa, but less than 20% was removed from 10 kDa to 3 kDa and <3 kDa fractions. Coagulation on pre-filtered samples removed 19% and 25% of the <3 kDa DON fraction using polyaluminum chloride and ferric chloride, respectively. In all molecular weight fractions, hydrophilic DON compounds were found to be dominant (>90%), and enhanced coagulation was not effective in removing hydrophilic DON compounds. LMW fractions respond poorly to enhanced coagulation due to their hydrophilic nature. Enhanced coagulation effectively removes humic acid-like substances, but poorly removes proteinaceous compounds such as tyrosine and tryptophan. This study's findings provide insights into DON behavior during coagulation and factors affecting its removal, potentially improving wastewater treatment strategies.

Chromophoric dissolved organic compounds in urban watershed and conventional water treatment process: evidence from fluorescence spectroscopy and PARAFAC

This study aimed to investigate the origin, quantity, and composition of chromophoric dissolved organic matter (CDOM) from two urbanized watersheds (Cikapundung and Cimahi River), examine how CDOM compounds and absorbances change along the process of two different conventional WTPs (WTP Dago and Cimahi) using PARAFAC, and identify absorbance as potential surrogate parameters for CDOM compounds. Samples were collected from intake, secondary treatment, and filter outlets. PARAFAC was conducted based on two data scenarios: (1) from rainy and dry seasons in Cikapundung river and WTP Dago and (2) from the two rivers and two WTPs during rainy season. Tryptophan-like (C1A) and humic-like (C2A) compounds were identified based on scenario-1 analysis. For scenario-2, humic-like (C1B), peak-M (C2B), and tryptophan-like (C3B) were the main compounds. CDOM compound quantity is consistent with the fluorescence index (FI) and biological index (BIX) which confirmed sewage and animal manure pollution in both watersheds. The best overall removal of CDOM compound occurred in WTP Dago in rainy season. The high concentration of tryptophan-like in Cikapundung River in dry season and in Cimahi River in rainy season has worsen the WTP capability to reduce CDOM. Scenario-1 has shown that in WTP Dago, the potential surrogate parameter for C1A was A240 in rainy season (r = 0.60; p < 0.01) and A410 in dry season (r =  - 0.43, p < 0.05). Based on scenario-2, for the WTP Dago in rainy season, C1B strongly correlated with A254 (r = 0.86; p < 0.01), C2B has the strongest correlation with A298 (r = 0.93; p < 0.01), and C3B correlated well with A240 (r = 0.59; p < 0.01). In WTP Cimahi, during rainy season, all compounds correlated well with all measured absorbances, with the strongest correlation with A298.

Removal of disinfection by-product precursors by Al-based coagulants: A comparative study on coagulation performance

Coagulation is well-established for controlling regulated disinfection by-products (DBPs), but its effectiveness for controlling unregulated DBPs remains unclear. The efficiency of coagulation in controlling unregulated DBPs requires clarification owing to their relatively high toxicity. In this study, three Al-based coagulants, aluminum sulfate (Alum), polyaluminum chloride (PAC), and a novel type of covalently bond hybrid coagulant (CBC, synthesized using AlCl₃) were selected, and the coagulation performance of these Al-based coagulants in controlling DBPs and DBP-associated toxicity was compared over 5 classes of DBPs, including trihalomethanes, haloacetic acids, haloacetaldehydes, haloacetonitriles, and halonitromethanes. The results showed that Alum was the least efficient in removing DBP precursors among the three coagulants. The effectiveness of CBC and PAC for DBP control varied with the characteristics of source waters. CBC had an advantage in water with a low content of humic acids, and reduced DBP concentration and DBP-associated toxicity by 47% and 25%, respectively. For water rich in aromatic organics, CBC might serve as DBP precursors at a high-required dosage, suggesting that a trade-off between enhanced DBP control and serving as DBP precursors should be considered for CBC coagulation; PAC achieved the most reduction in DBP concentration and DBP-associated toxicity by 50% and 34%, respectively.

Fe3O4 hollow nanospheres on graphene oxide as an efficient heterogeneous photo-Fenton catalyst for the advanced treatment of biotreated papermaking effluent

This study focused on the feasibility of using Fe₃O₄/graphene oxide (FGO) nanocomposites as heterogeneous catalysts for the advanced treatment of real industrial wastewater. FGO nanocomposites with different graphene oxide (GO) ratios were synthesized by coprecipitating iron salts onto GO sheets in basic solution. The characterization of the resulting material structures and functionalities was performed using a range of analytical techniques. A low GO loading afforded a good Fe₃O₄ nanoparticle dispersibility and resulted in a higher Brunauer-Emmett-Teller surface area and pore volume. The FGO nanocomposites and pure Fe₃O₄ were used to treat papermaking wastewater in a heterogeneous photo-Fenton process. The results suggested that the nanocomposite designated FGO1 (GO loading of 25 mg) exhibits a higher photocatalytic efficiency than other FGO nanocomposites and pure Fe₃O₄. A maximum chemical oxygen demand degradation efficiency of 89.6% was achieved in 80 min with 1.5 g L^-1 FGO1 at pH 3. The degradation of different pollutants present in wastewater was evaluated with the aid of gas chromatography-mass spectrometry and 3D excitation-emission-matrix analysis. Inductively coupled plasma atomic emission spectroscopy and magnetic measurements confirmed that the FGO1 nanocomposites possess a low iron leachability and a high reusability. Thus, a comprehensive advanced treatment of real industrial wastewater using a magnetic FGO catalyst is demonstrated.

Magnetic seeding coagulation: Effect of Al species and magnetic particles on coagulation efficiency, residual Al, and floc properties

Magnetic seeding coagulation (MSC) process has been used to accelerate flocs sedimentation with an applied magnetic field, offering large handling capacity and low energy consumption. The interactions of three typical Al species, aluminum chloride (AlCl₃), Al₁₃O₄(OH)₂₄⁷⁺ polymer (Al₁₃), and (AlO₄)₂Al₂₈(OH)₅₆¹⁸⁺ polymer (Al₃₀), with magnetic particles (MPs) were examined to clarify the MSC process. In traditional coagulation (TC) process, the aggregation of primary Al_a-dissolved organic matter (DOM) complexes with in-situ-formed polynuclear species generated a large average floc size (226 μm), which was proved to be efficient for DOC removal (52.6%). The weak connections between dissolved Al_a-DOM complexes and MPs led to the negligible changes of dissolved Al after seeding with MPs in AlCl₃. A significant interaction between MPs and Al₁₃ was observed, in which the MPs-Al₁₃-DOM complexes were proposed to be responsible for the significant improvement of DOC removal (from 47% to 52%) and residual total Al reduction (from 1.05 to 0.27 mg Al L^-1) with MPs addition. Al₃₀ produced a lower floc fractal dimension (D_f = 1.88) than AlCl₃ (2.08) and Al₁₃ (1.99) in the TC process, whereas its floc strength (70.9%) and floc recovery (38.5%) were higher than the others. Although more detached fragments were produced with MPs addition, the effective sedimentation of these fragments with the applied magnetic field led to the decrease of residual turbidity and colloidal Al in Al₃₀. The dependence of coagulation behavior to MPs and different Al species can be applied to guide the application of an effective MSC process.

Using excitation-emission matrix fluorescence to evaluate the performance of water treatment plants for dissolved organic matter removal

This study is aimed at assessing the performance of water treatment plants (both wastewater and drinking water treatment plants) for dissolved organic matter (DOM) removal using excitation-emission matrix fluorescence (EEMF) as the monitoring technique. The influent from the wastewater treatment plant (WWTP) of Burgos (Spain) is characterized from the presence of protein-like peaks (T1 and T2) and humic-like peaks (A and C), T2 and A showing the highest fluorescence intensity. The percentages of total removal in the effluent were in the following order: peak T1 (65%) > peak A (45%) > peak C (34%) > peak T2 (26%). The humic-like peaks were the most removed at the primary sedimentation stage, whereas peak T1 was by far the most removed in the biological reactor. Protein-like peaks T1 and T2 experienced a slight increase in the final effluent in comparison to their fluorescence at the previous stage (the exit of the biological reactor), an increase that can be explained by the release of SMP (soluble microbial products) from the biomass in the secondary clarifier. A poor correlation was obtained between peak T2 fluorescence and COD, BOD (r² = 0.34-0.38). The natural water from the Úzquiza reservoir in Burgos (Spain) is characterized by the only presence of humic substances: a majority peak A (fulvic-like) and a weak peak C (humic-like). The whole fluorescent DOM was removed by coagulation-flocculation but a low fluorescence peak T2 appeared at the final stage, coming from protein-like SMPs released by the biomass attached to the filters.

Natural organic matter removal from algal-rich water and disinfection by-products formation potential reduction by powdered activated carbon adsorption

Algal blooms intensified operational problems in water treatment due to the increases of taste- and odor-causing compounds and natural organic matter (NOM). Effects of powdered activated carbon (PAC) addition during algal blooms on NOM removal was investigated in this study using an algal-rich water. Water quality analyses including dissolved organic carbon (DOC), ultraviolet absorbance at 254 nm (UV₂₅₄) and specific UV absorbance (SUVA) were performed to elucidate characteristics of NOM removal by PAC adsorption. Variations of MW distributions and emission/excitation matrix (EEM) spectra with increasing PAC dosages were also measured. In addition, formation potential (FP) of trihalomethanes (THMs), haloacetic acids (HAAs), and haloacetonitriles (HANs) was evaluated with increasing PAC dosage. The correlations between disinfection by-products formation potential (DBPFP) and water qualities such as DOC, UV₂₅₄, SUVA, and EEM spectra were also investigated to identify factors associated with DBPFP. The PAC addition was effective to remove NOM, especially low molecular weights NOM and proteinaceous substances with weak aromatics. The PAC addition showed the consistent reduction of THMFPs, HAAFPs, and HANFPs with increasing PAC dosage while the greater reduction of HAN precursors was eminent compared to the other two FPs. The close correlations between UV₂₅₄ and the three DBPFPs were obtained. The low molecular weight (i.e., 1-700 Da) NOM and three fluorescence spectra peaks, i.e., T₁, A and C peaks, also showed high correlation factors with the three DBPFPs. Those analyses with high correlations with DBPFPs would provide useful information to reduce DBPs during algal blooms.

Optical and molecular signatures of dissolved organic matter in Xiangxi Bay and mainstream of Three Gorges Reservoir, China: Spatial variations and environmental implications

With the on-going boom in the construction of dam reservoirs all over the world, the sources and composition of dissolved organic matter (DOM) in fluvial networks are expected to be altered. Considering the importance of DOM as a key biogeochemical component in inland waters, this might bring important ecological and environmental influences. However, limited information is available on the molecular composition of DOM in dam reservoirs. In this study, the spatial characteristics of DOM composition were investigated in Xiangxi tributary and mainstream of the Three Gorges Reservoir (TGR), the largest freshwater reservoir in the world. The concentration alteration of conservative cations revealed the water intrusion from mainstream into Xiangxi tributary, which mainly controlled the hydrological gradient. One tyrosine-like (C4), one tryptophan-like (C2), and two humic-like (C1 and C3) fluorescent components were identified in fluorescent DOM (FDOM) by parallel factor analysis (PAFACAC), potentially indicating algal, anthropogenic, and terrestrial inputs, respectively. Decreasing trends of C1, C3 and C4 components and an increasing trend of C2 component were observed from Xiangxi tributary to mainstream, indicating higher terrestrial and algal inputs but lower anthropogenic inputs in Xiangxi tributary compared to mainstream. The Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) characterization further revealed substantial heterogeneity of DOM at the molecular level. Interestingly, S-containing compounds related to synthetic surfactants were consistently detected, and their relative abundances showed an increasing trend from Xiangxi tributary to mainstream, in agreement with the distribution of the anthropogenic derived C2 component. Meanwhile, numerous lignin-like S-containing compounds were identified, likely the result of the incorporation of sulfide ions to lignin-like CHO compounds. This study represents the first molecular level characterization of DOM in the TGR system, which should aid the design and implementation of more detailed future studies.

Preferential binding between intracellular organic matters and Al13 polymer to enhance coagulation performance

Coagulation is the best available method for removing intracellular organic matter (IOM), which is released from algae cells and is an important precursor to disinfection by-products in drinking water treatment. To gain insight into the best strategy to optimize IOM removal, the coagulation performance of two Al salts, i.e., aluminum chloride (AlCl₃) and polyaluminum chloride (PACl, containing 81.2% Al₁₃), was investigated to illuminate the effect of Al species distribution on IOM removal. PACl showed better removal efficiency than AlCl₃ with regard to the removal of turbidity and dissolved organic carbon (DOC), owing to the higher charge neutralization effect and greater stability of pre-formed Al₁₃ species. High pressure size exclusion chromatography analysis indicated that the superiority of PACl in DOC removal could be ascribed to the higher binding affinity between Al₁₃ polymer and the low and medium molecular weight (MW) fractions of IOM. The results of differential log-transformed absorbance at 254 and 350 nm indicated more significant formation of complexes between AlCl₃ and IOM, which benefits the removal of tryptophan-like proteins thereafter. Additionally, PACl showed more significant superiority compared to AlCl₃ in the removal of <5 kDa and hydrophilic fractions, which are widely viewed as the most difficult to remove by coagulation. This study provides insight into the interactions between Al species and IOM, and advances the optimization of coagulation for the removal of IOM in eutrophic water.

Pretreatment of landfill leachate in near-neutral pH condition by persulfate activated Fe-C micro-electrolysis system

In this study, a novel persulfate combined with iron-carbon microelectrolysis (PS-ICME) system was explored to pretreat the landfill leachate. In the static batch experiments, response surface methodology (RSM) was used to determine the relationship between three independent variables (pH, the ratio of iron to carbon (Fe-C ratio), persulfate dosage) and response values (Chemical oxygen demand (COD) removal efficiency). Experimental results showed that the COD removal efficiency reached to 62.91% under the optimal conditions: initial pH 7, Fe-C ratio 3, and persulfate dosage 85 mM. The dissolved organic matter (DOM) in landfill leachate was characterized by three-dimensional excitation-emission matrix spectroscopy (3D-EEMs). Combined with electron spin resonance (ESR) spectrum investigation, the enhanced mechanism for landfill leachate pretreated by PS-ICE in near-neutral pH was elucidated. In the column continuous flow experiment, it had been confirmed that dissolved oxygen plays an important role in the PS-ICME system. Based on the above conclusions, PS-ICME system has a satisfactory performance on pretreatment of landfill leachate.

A fluorescence-based assessment of the fate of organic matter in water treated using crude/purified Hibiscus seeds as coagulant in drinking water treatment

This study used fluorescence excitation-emission matrices (EEMs) analysis to investigate the characteristics of natural organic matter (NOM) in treated water using okra crude extract (OCE), sabdariffa crude extract (SCE) and kenaf crude extract (KCE) as coagulants. In addition, an assessment of the impact of purified okra protein (POP), purified sabdariffa protein (PSP) and purified kenaf protein (PKP) was undertaken. The performance evaluation of these coagulants in terms of increase or decrease in dissolved organic carbon (DOC) was compared with Peak T fluorescence intensity observed at excitation wavelength 220-230 nm, and emission wavelength 340-360 nm. Fluorescence analysis of water treated with the crude extracts identified the removal of DOC in peaks A and C region whereas the increase in DOC from the protein was predominantly found in peaks T and B region. Furthermore, it was observed that the purified proteins were noted to be capable of reducing the DOC concentration in raw water where all fluorophores were not detected. The application of OCE, SCE and KCE yielded an increase in DOC of 65, 61 and 55% respectively, corresponding to increases of 65, 29 and 54% in peak T fluorescence intensities, at 100 mg/l dose. Furthermore, DOC concentration was reduced by 25, 24 and 18% using POP, PSP and PKP respectively as coagulants with corresponding decreases in fluorescence intensity of 46%, 44 and 36% in POP, PSP and PKP, at a lower dose of 0.1 mg/l. Therefore, it is clear that Peak T fluorescence intensity could be used to characterise organic matter in treated water using natural extracts to assess final water quality.

Optimized removal of natural organic matter by ultrasound-assisted coagulation of recycling drinking water treatment sludge

In previous work we have shown that recycling pre-sonicated drinking water treatment sludge (DWTS) could improve coagulated water quality. Here, the removal of naturally occurring organic matter of source water was further optimized using response surface methodology (RSM) with Box-Behnken Design (BBD). The four variables, i.e., volumetric recycling ratio of DWTS, energy density, ultra-sonication time and duty cycle in an experimental jar test of ultrasound assisted flocculation-coagulation were optimized. All the variables showed a significant effect on dissolved organic carbon (DOC) removal of source water (p < .05), of which the duty cycle had a stronger effect on the removal performance compared to the other independent variables. The predicted optimal DOC removal rate was 36.94%, and this matched well the observed performance of 36.54 ± 0.56%, obtained by ultra-sonicating the sludge prior to recycling using a power input of 1.015 W/mL, an ultra-sonication time of 9 min 50 s, and a duty cycle of 80%, while the volumetric recycling ratio of DWTS was 5.8%. The natural organic matter fractions in the coagulated water samples indicated that recycling sonicated DWTS that had been washed prior to recycling in order to remove solubilized extracellular polymers could enhance removal of hydrophobic acids and 3-30 kDa fractions, but this treatment increased the presence of substances with molecular weight <3 kDa. Humic-like substances were effectively removed while tyrosine-like substances could be enriched. Sludge samples (raw DWTS, sonicated DWTS, sludge formed by recycling raw DWTS, and sludge formed by recycling sonicated DWTS without solubilized extracellular organics) were characterized by XRF, X-ray diffraction patterns and FE-SEM-EDS to reveal possible physical characteristics that could be related to the DOC removal performance.

Enhancement of surfactant biodegradation with an anaerobic membrane bioreactor by introducing microaeration

In controlled ecological life support system (CELSS), 100% water recycle efficiency is needed. Both water and nutrients in wastewater needs reclaiming. In an anaerobic membrane bioreactor (AnMBR) designed to hydrolyze organic matters and convert organic nitrogen, accumulation of anionic surfactants and organic compounds was observed in the supernatant. To solve the problem, microaeration which had rarely been reported to enhance surfactants biodegradation in anaerobic process was introduced and it was proved to be an effective approach that resulted in concentrations of surfactants and soluble chemical oxygen demand (SCOD) in the supernatant decreasing from 9000 mg/L and 40000 mg/L to 2000 mg/L and 10000 mg/L, respectively. And the degradations followed the kinetic characteristics of zero order reaction with R² values of 0.9472 and 0.949. Three-dimensional excitation emission matrix (3D-EEM) analysis revealed that some activities of microbes were activated and enhanced by microaeration, which resulted in the disintegration of aggregates of large molecules, indicated by the size exclusion chromatography (SEC). After the introduction of microaeration, the emerging genera Aquamicrobium, Flaviflexus, Pseudomonas and Thiopseudomonas in the microbial community might be responsible for the effective biodegradation of the surfactants.

Differences in behaviour of three biopolymer constituents in coagulation with polyaluminium chloride: Implications for the optimisation of a coagulation-membrane filtration process

Coagulation is often applied as a pre-treatment for membrane processes to reduce dissolved organic matter and to prevent membrane fouling. Biopolymers (BPs) have repeatedly been reported as major organic foulants, and coagulation conditions such as pH or dose have been optimised to minimise the remaining BPs. Optimisation however remains problematic because of the complex and heterogenetic nature of BP. In this study, the behaviour of several BP fractions in a coagulation process was investigated by excitation-emission matrix-parallel factor analysis (EEM-PARAFAC) following liquid chromatography (LC)-fractionation. Using a series of jar tests, we found that BP removal depends on the type of source water, reflecting differences in charge neutralisation conditions in three samples of natural water despite nearly identical processes for removing humic substances. This result demonstrates the complexity of optimisation for BP coagulation. Fractionation of EEM-PARAFAC to BP by LC showed that at least three organic component groups (C1, C2 and C3) constitute BP. C1 is tryptophan-like organic matter that is often found in wastewater effluent, C2 is tyrosine-like organic matter that has a phenolic chemical structure, and C3 is a humic-like substance. C1 was removed thoroughly at acidic pH but not at neutral pH, while the removal of C2 was inefficient even with a significant change in pH or dose, indicating similar difficulties in a coagulation process. The difference in components C1 and C2 may partly explain the difference in efficiencies of removal of BP in water from different sources. Our investigation suggests that the optimisation or selection of appropriate pre-treatment processes for membrane systems should be substantially based on the composition of BPs (e.g., C1 and C2 components).

Cation-induced coagulation of aquatic plant-derived dissolved organic matter: Investigation by EEM-PARAFAC and FT-IR spectroscopy

Complexation and coagulation of plant-derived dissolved organic matter (DOM) by metal cations are important biogeochemical processes of organic matter in aquatic systems. Thus, coagulation and fractionation of DOM derived from aquatic plants by Ca(II), Al(III), and Fe(III) ions were investigated. Metal ion-induced removal of DOM was determined by analyzing dissolved organic carbon in supernatants after addition of these metal cations individually. After additions of metal ions, both dissolved and coagulated organic fractions were characterized by use of fluorescence excitation emission matrix-parallel factor (EEM-PARAFAC) analysis and Fourier transform infrared (FT-IR) spectroscopy. Addition of Ca(II), Fe(III) or Al(III) resulted in net removal of aquatic plant-derived DOM. Efficiencies of removal of DOM by Fe(III) or Al(III) were greater than that by Ca(II). However, capacities to remove plant-derived DOM by the three metals were less than which had been previously reported for humic materials. Molecular and structural features of plant-derived DOM fractions in associations with metal cations were characterized by changes in fluorescent components and infrared absorption peaks. Both aromatic and carboxylic-like organic matters could be removed by Ca(II), Al(III) or Fe(III) ions. Whereas organic matters containing amides were preferentially removed by Ca(II), and phenolic materials were selectively removed by Fe(III) or Al(III). These observations indicated that plant-derived DOM might have a long-lasting effect on water quality and organisms due to its poor coagulation with metal cations in aquatic ecosystems. Plant-derived DOM is of different character than natural organic matter and it is not advisable to attempt removal through addition of metal salts during treatment of sewage.

Characterisation of landfill leachate by EEM-PARAFAC-SOM during physical-chemical treatment by coagulation-flocculation, activated carbon adsorption and ion exchange

The combination of fluorescence excitation-emission matrices (EEM), parallel factor analysis (PARAFAC) and self-organizing maps (SOM) is shown to be a powerful tool in the follow up of dissolved organic matter (DOM) removal from landfill leachate by physical-chemical treatment consisting of coagulation, granular activated carbon (GAC) and ion exchange. Using PARAFAC, three DOM components were identified: C1 representing humic/fulvic-like compounds; C2 representing tryptophan-like compounds; and C3 representing humic-like compounds. Coagulation with ferric chloride (FeCl₃) at a dose of 7 g/L reduced the maximum fluorescence of C1, C2 and C3 by 52%, 17% and 15% respectively, while polyaluminium chloride (PACl) reduced C1 only by 7% at the same dose. DOM removal during GAC and ion exchange treatment of raw and coagulated leachate exhibited different profiles. At less than 2 bed volumes (BV) of treatment, the humic components C1 and C3 were rapidly removed, whereas at BV ≥ 2 the tryptophan-like component C2 was preferentially removed. Overall, leachate treated with coagulation +10.6 BV GAC +10.6 BV ion exchange showed the highest removal of C1 (39% - FeCl₃, 8% - PACl), C2 (74% - FeCl₃, 68% - PACl) and no C3 removal; whereas only 52% C2 and no C1 and C3 removal was observed in raw leachate treated with 10.6 BV GAC + 10.6 BV ion exchange only. Analysis of PARAFAC-derived components with SOM revealed that coagulation, GAC and ion exchange can treat leachate at least 50% longer than only GAC and ion exchange before the fluorescence composition of leachate remains unchanged.

Simultaneous removal of phosphorus and dissolved organic matter from a sludge in situ reduction process effluent by coagulants

Owing to the long solids retention time and effective sludge decay, the increase in the amount of phosphorus and dissolved organic matter (DOM) in effluents is a major obstacle to the sludge in situ reduction process.

Hydrolytic Amino Acids Employed as a Novel Organic Nitrogen Source for the Preparation of PGPF-Containing Bio-Organic Fertilizer for Plant Growth Promotion and Characterization of Substance Transformation during BOF Production

Opportunity costs seriously limit the large-scale production of bio-organic fertilizers (BOFs) both in China and internationally. This study addresses the utilization of amino acids resulting from the acidic hydrolysis of pig corpses as organic nitrogen sources to increase the density of TrichodermaharzianumT-E5 (a typical plant growth-promoting fungi, PGPF). This results in a novel, economical, highly efficient and environmentally friendly BOF product. Fluorescence excitation-emission matrix (EEM) spectroscopy combined with fluorescence regional integration (FRI) was employed to monitor compost maturity levels, while pot experiments were utilized to test the effects of this novel BOF on plant growth. An optimization experiment, based on response surface methodologies (RSMs), showed that a maximum T-E5 population (3.72 × 108 ITS copies g-1) was obtained from a mixture of 65.17% cattle manure compost (W/W), 19.33% maggot manure (W/W), 15.50% (V/W)hydrolytic amino acid solution and 4.69% (V/W) inoculum at 28.7°C after a 14 day secondary solid fermentation. Spectroscopy analysis revealed that the compost transformation process involved the degradation of protein-like substances and the formation of fulvic-like and humic-like substances. FRI parameters (PI, n, PII, n, PIII, n and PV, n) were used to characterize the degree of compost maturity. The BOF resulted in significantly higher increased chlorophyll content, shoot length, and shoot and root dry weights of three vegetables (cucumber, tomato and pepper) by 9.9%~22.4%, 22.9%~58.5%, 31.0%~84.9%, and 24.2%~34.1%, respectively. In summary, this study presents an operational means of increasing PGPF T-E5 populations in BOF to promote plant growth with a concomitant reduction in production cost. In addition, a BOF compost maturity assessment using fluorescence EEM spectroscopy and FRI ensured its safe field application.

The removal characteristics of natural organic matter in the recycling of drinking water treatment sludge: Role of solubilized organics

To clarify the role of solubilized organics derived from drinking water treatment sludge (DWTS) in the elimination of natural organic matter (NOM) in the DWTS recycling process, a probe sonoreactor at a frequency of 25 kHz was used to solubilize the organics at varied specific energies. The coagulation behavior related to NOM removal in recycling the sonicated DWTS with and without solubilized organics was evaluated, and the effect on organic fractionations in coagulated water was determined. The study results could provide useful implications in designing DWTS recycling processes that avoid the enrichment of organic matter. Our results indicate that DWTS was disrupted through a low release of soluble chemical oxygen demand (SCOD) and proteins, which could deteriorate the coagulated water quality under the specific energy of 37.87-1212.1 kW h/kg TS. The optimal coagulation behavior for NOM removal was achieved by recycling the sonicated DWTS without solubilized organics at 151.5 kW h/kg TS specific energy. Recycling the sonicated DWTS could increase the enrichment potential of weakly hydrophobic acid, hydrophilic matter, and <3 kDa fractions; the enrichment risks could be reduced by discharging the solubilized organics. Fluorescent characteristic analysis indicated that when recycling the sonicated DWTS without solubilized organics, the removal of humic-like substances was limited, whereas removal of protein-like substances was enhanced, lowering the enrichment potential of protein-like substances.

Effects of ultrasound pretreatment on the characteristic evolutions of drinking water treatment sludge and its impact on coagulation property of sludge recycling process

Large amounts of drinking water treatment sludge (DWTS) are produced during the flocculation or flotation process. The recycling of DWTS is important for reducing and reclaiming the waste residues from drinking water treatment. To improve the coagulation step of the DWTS recycling process, power ultrasound was used as a pretreatment to disintegrate the DWTS and degrade or inactivate the constituents that are difficult to remove by coagulation. The effects of ultrasound pretreatment on the characteristics of DWTS, including the extent of disintegration, variation in DWTS floc characteristics, and DWTS dewaterability, were investigated. The capacity of the recycling process to remove particulates and organic matter from low-turbidity surface water compared to a control treatment process without DWTS was subsequently evaluated. The coagulation mechanism was further investigated by analyzing the formation, breakage, and re-growth of re-coagulated flocs. Our results indicated that under the low energy density applied (0.03-0.033 W/mL) for less than 15 min at a frequency of 160 kHz, the level of organic solubilization was less elevated, which was evidenced by the lower release of proteins and polysaccharides and lower fluorescence intensities of humic- and protein-like substances. The applied ultrasound conditions had an adverse effect on the dewaterability of the DWTS. Ultrasound pretreatment had no significant impact on the pH or surface charge of the DWTS flocs, whereas particle size decreased slightly and the specific surface area was moderately increased. The pollution removal capacity decreased somewhat for the recycled sonicated DWTS treatment, which was primarily ascribed to organic solubilization rather than variability in the floc characteristics of sonicated DWTS. The main coagulation mechanism was floc sweeping and physical adsorption. The breakage process of the flocs formed by the recycling process displayed distinct irreversibility, and the flocs were stronger and more resistant to breakage compared to those from the control treatment.

Conservative behavior of fluorescence EEM-PARAFAC components in resin fractionation processes and its applicability for characterizing dissolved organic matter

In this study, the applicability of the fluorescence excitation-emission matrix combined with parallel factor analysis (EEM-PARAFAC) was verified for resin fractionation processes, in which bulk dissolved organic matter (DOM) is separated into several fractions presumably having similar chemical structures. Here, four PARAFAC components, including three humic-like and one protein-like components, were identified from the EEMs of all DOM samples through fractionation procedures and the subtracted EEMs between before and after resins for different DOM sources (effluent, limnic, and riverine). The PARAFAC components exhibited conservative behavior upon resin fractionation, as indicated by the minimal difference in the PARAFAC components retained on resins calculated based on the direct subtraction of the components and the subtracted EEMs. The conservative behavior of PARAFAC components was more obvious compared with other fluorescent DOM (FDOM) indicators derived from peak-picking and fluorescence regional integration (FRI) methods. Humic-like components were more insensitive to resin fractionation than protein-like component. No consistency was found in the relative abundances of the PARAFAC components for the same resin fractions with different DOM sources, suggesting that the FDOM composition is more affected by DOM sources rather than by the resin fractions. Our study demonstrated that EEM-PARAFAC coupled with resin fractionation could provide detailed information on DOM by quantitatively comparing the individual PARAFAC components within different resin fractions.

Distribution of dissolved organic matter in freshwaters using excitation emission fluorescence and Multivariate Curve Resolution

Multivariate Curve Resolution Alternating Least Squares (MCR-ALS) method with the trilinearity constraint is proposed for the analysis of excitation-emission fluorescence data from Dissolved Organic Matter (DOM) in fresh water natural systems, and the results obtained are compared with those obtained with PARAFAC. The effects of different number of components and constraints on the stability of the proposed models are compared. MCR-ALS is shown to be an effective way to characterize and resolve DOM sources in natural fresh water systems from EEM data, with good correlation with experimentally measured DOM concentration values. MATLAB georeferenced mapping is used to illustrate the geographical distribution of resolved DOM contributions. MCR-ALS resolved EEM spectra are used to recognize the corresponding chemical groups assigned to possible DOM sources. Relationships between human activities and the environmental situation of the river system are discussed from these possible DOM sources.

Evaluation of natural organic matter changes from Lake Hohloh by three-dimensional excitation-emission matrix fluorescence spectroscopy during TiO(2)/UV process

This study shows the changes of natural organic matter (NOM) from Lake Hohloh, (Black Forest, Germany) during heterogeneous photocatalysis with TiO2 (TiO2/UV). The effect of pH on the adsorption of NOM onto TiO2 in the dark and TiO2/UV degradation of NOM was followed using three-dimensional excitation-emission matrix (EEM) fluorescence. At pH values between 4 and 9, the NOM was adsorbed onto TiO2 in the dark with a greater decrease in the fluorescence intensity and in the spectral shapes, especially under acidic pH conditions. However, at pH = 10 there was not adsorption on NOM which led to a negligible changes the fluorescence intensity. A significant high linear correlation was observed between the DOC adsorption onto TiO2 and the maximum fluorescence intensity. Additionally, the NOM adsorption onto TiO2 and its TiO2/UV degradation shifted the fluorescence maxima toward shorter wavelengths in the EEM contour plots, with a decrease in aromaticity. These changes were accompanied by a substantial decrease in the organically bound halogens adsorbable on activated carbon (AOXFP) and the trihalomethane formation potential (THMFP). Thus, the decrease in maximum fluorescence intensity can be used as an indicator of AOXFP and TTHMFP removal efficiency. Therefore, fluorescence spectroscopy is a robust analytical technique for evaluate TiO2/UV removal of NOM.

Critical analysis of commonly used fluorescence metrics to characterize dissolved organic matter

The use of fluorescence spectroscopy for the analysis and characterization of dissolved organic matter (DOM) has gained widespread interest over the past decade, in part because of its ease of use and ability to provide bulk DOM chemical characteristics. However, the lack of standard approaches for analysis and data evaluation has complicated its use. This study utilized comparative statistics to systematically evaluate commonly used fluorescence metrics for DOM characterization to provide insight into the implications for data analysis and interpretation such as peak picking methods, carbon-normalized metrics and the fluorescence index (FI). The uncertainty associated with peak picking methods was evaluated, including the reporting of peak intensity and peak position. The linear relationship between fluorescence intensity and dissolved organic carbon (DOC) concentration was found to deviate from linearity at environmentally relevant concentrations and simultaneously across all peak regions. Comparative analysis suggests that the loss of linearity is composition specific and likely due to non-ideal intermolecular interactions of the DOM rather than the inner filter effects. For some DOM sources, Peak A deviated from linearity at optical densities a factor of 2 higher than that of Peak C. For carbon-normalized fluorescence intensities, the error associated with DOC measurements significantly decreases the ability to distinguish compositional differences. An in-depth analysis of FI determined that the metric is mostly driven by peak emission wavelength and less by emission spectra slope. This study also demonstrates that fluorescence intensity follows property balance principles, but the fluorescence index does not.

Assessment of dissolved organic matter fluorescence PARAFAC components before and after coagulation-filtration in a full scale water treatment plant

Fluorescence monitoring of the raw and treated water after coagulation-filtration in a drinking water treatment plant in Northeast Ohio was conducted during a period of 32 months. Principal fluorophore groups present in the dissolved organic matter (DOM) of the raw, treated, raw-treated combined water and differential fluorescence data sets comprising over 680 samples were determined through Parallel Factor (PARAFAC) analysis. Four components (two humic-like and two with protein nature) were identified in each model and their degree of similarity was evaluated using the Uncorrected Matrix Correlation (UMC), a measure of spectral overlapping. Results show that spectral characteristics of the components in the independent models are comparable (average UMC > 0.98), indicating that from a PARAFAC perspective, components in the raw water are not experiencing major transformations beyond removal through the treatment process and new fluorescent components are not being formed. Coagulation assessment based on PARAFAC application to the differential excitation-emission matrices (ΔEEM), representing the portion of fluorescence removed after treatment, is introduced in this paper along with the volumetric evaluation of the components present in a sample as an alternative approach to determine their relative contribution. Volumetric analysis revealed a predominance of humic components, constituting about 80% in the raw and treated water. Results of the ΔEEM model indicated that the most amenable component to be removed by coagulation (removal ≈ 50%) at full scale operation is a humic-like fluorophore with predominance in the raw water, while removal of the protein-like components was about 30%. Results also show that the PARAFAC sample loadings exhibit a higher association with the total EEM signal in the raw and treated water samples when compared with alternative analysis techniques. These results support the analysis of the PARAFAC components present in the raw and treated samples as a viable measure for assessment of the coagulation process in a drinking water treatment plant.

Assessment of the maturity and biological parameters of compost produced from dairy manure and rice chaff by excitation-emission matrix fluorescence spectroscopy

The assessment of maturity and biological parameters is important in the composting process. In this study, excitation-emission matrix (EEM) fluorescence spectroscopy was applied to evaluate the maturity and biological parameters of compost produced from the co-composting of dairy and rice chaff. The results from a Pearson correlation analysis between traditional physico-chemical maturity indices and fluorescence regional integration (FRI) parameters showed that among the FRI parameters, P(V,n)/P(III,n) and P(V,n) were suitable for the assessment of compost maturity. Moreover, the FRI parameters could be used to evaluate biological parameters including the germination index (GI) and ribotype evolution which indicate the bacterial community structure and dynamics. P(IV,n) was the most suitable indicator for revealing the community structure and dynamics during the composting process. Fluorescence spectroscopy combined with the FRI analysis could be used as a sensitive and efficient tool for assessing compost maturity and biological parameters.

Behavior of reoccurring PARAFAC components in fluorescent dissolved organic matter in natural and engineered systems: a critical review

Fluorescence spectroscopy coupled with parallel factor analysis (PARAFAC) has been widely used to characterize dissolved organic matter (DOM). Characterization is based on the intensity and location of independent fluorescent components identified in models constructed from excitation-emission matrices (EEMs). Similar fluorescent components have been identified in PARAFAC studies across a wide range of systems; however, there is a lack of discussion regarding the consistency with which these similar components behave. The overall goal of this critical review is to compare results for PARAFAC studies published since the year 2000 which include one or more of three reoccurring humic-like components. Components are compared and characterized based on EEM location, characteristic ecosystems, and behavior in natural and engineered systems. This synthesis allows PARAFAC users to more confidently infer DOM characteristics based on identified components. Additionally, behavioral inconsistencies between similar components help elucidate DOM properties for which fluorescence spectroscopy with PARAFAC may be a weak predictive tool.

Biofouling potential reductions using a membrane hybrid system as a pre-treatment to seawater reverse osmosis

Biofouling on reverse osmosis (RO) membranes is the most serious problem which affects desalination process efficiency and increases operation cost. The biofouling cannot be effectively removed by the conventional pre-treatment traditionally used in desalination plants. Hybrid membrane systems coupling the adsorption and/or coagulation with low-pressure membranes can be a sustainable pre-treatment in reducing membrane fouling and at the same time improving the feed water quality to the seawater reverse osmosis. The addition of powder activated carbon (PAC) of 1.5 g/L into submerged membrane system could help to remove significant amount of both hydrophobic compounds (81.4%) and hydrophilic compounds (73.3%). When this submerged membrane adsorption hybrid system (SMAHS) was combined with FeCl(3) coagulation of 0.5 mg of Fe(3+)/L, dissolved organic carbon removal efficiency was excellent even with lower dose of PAC (0.5 g/L). Detailed microbial studies conducted with the SMAHS and the submerged membrane coagulation-adsorption hybrid system (SMCAHS) showed that these hybrid systems can significantly remove the total bacteria which contain also live cells. As a result, microbial adenosine triphosphate (ATP) as well as total ATP concentrations in treated seawater and foulants was considerably decreased. The bacteria number in feed water prior to RO reduced from 5.10E(+06) cells/mL to 3.10E(+03) cells/mL and 9.30E(+03) cells/mL after SMAHS and SMCAHS were applied as pre-treatment, respectively. These led to a significant reduction of assimilable organic carbon (AOC) by 10.1 μg/L acetate-C when SMCAHS was used as a pre-treatment after 45-h RO operation. In this study, AOC method was modified to measure the growth of bacteria in seawater by using the Pseudomonas P.60 strain.

Characterization of organic membrane foulants in a submerged membrane bioreactor with pre-ozonation using three-dimensional excitation-emission matrix fluorescence spectroscopy

This study focuses on organic membrane foulants in a submerged membrane bioreactor (MBR) process with pre-ozonation compared to an individual MBR using three-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy. While the influent was continuously ozonated at a normal dosage, preferable organic matter removal was achieved in subsequent MBR, and trans-membrane pressure increased at a much lower rate than that of the individual MBR. EEM fluorescence spectroscopy was employed to characterize the dissolved organic matter (DOM) samples, extracellular polymeric substance (EPS) samples and membrane foulants. Four main peaks could be identified from the EEM fluorescence spectra of the DOM samples in both MBRs. Two peaks were associated with the protein-like fluorophores, and the other ones were related to the humic-like fluorophores. The results indicated that pre-ozonation decreased fluorescence intensities of all peaks in the EEM spectra of influent DOM especially for protein-like substances and caused red shifts of all fluorescence peaks to different extents. The peak intensities of the protein-like substances represented by Peak T(1) and T(2) in EPS spectra were obviously decreased as a result of pre-ozonation. Both external and internal fouling could be effectively mitigated by the pre-ozonation. The most primary component of external foulants was humic acid-like substance (Peak C) in the MBR with pre-ozonation and protein-like substance (Peak T(1)) in the individual MBR, respectively. The content decrease of protein-like substances and structural change of humic-like substances were observed in external foulants from EEM fluorescence spectra due to pre-ozonation. However, it could be seen that ozonation resulted in significant reduction of intensities but little location shift of all peaks in EEM fluorescence spectra of internal foulants.

Different analysis techniques for fluorescence excitation-emission matrix spectroscopy to assess compost maturity

Assessment of compost maturity is essential for achieving high quality compost. In this study, fluorescence excitation-emission matrix spectroscopy combined with different analysis techniques was applied to improve the sensitivity of compost maturity assessment. Results showed that composts in two parallel piles could be believed mature after 37d when combined with the evolution of temperature, chemical and biological indices in the two piles. Pearson correlation between the common maturity indices and fluorescence analysis parameters demonstrated that fluorescence regional integration (FRI) had a higher correlation coefficient than that of fluorescence intensities and the ratios of peaks, suggesting that FRI technique is more suitable to characterize the maturity of compost than the other two analysis techniques, i.e., peak intensity and peak ratio. Furthermore, the fluorescence spectroscopy combined with FRI analysis could be used as a valuable industrial and research tool for assessing compost maturity.

Effect of landfill characteristics on leachate organic matter properties and coagulation treatability

This work spans landfill characteristics, leachate organic matter properties, and coagulation chemistry to provide new insights into the physical-chemical treatability of stabilized landfill leachate. Furthermore, leachate organic matter is viewed in terms of dissolved organic matter (DOM) present in the natural environment, and coagulation chemistry is evaluated based on previous leachate and water treatment coagulation studies. Stabilized leachate was collected from four landfills for a total of seven leachate samples, and samples were coagulated using ferric chloride, ferric sulfate, and aluminum sulfate. Landfill characteristics, such as age, leachate recirculation, and cover material, influenced properties of DOM present in the leachate, as measured by specific ultraviolet (UV) absorbance at 254 nm (SUVA254) and fluorescence excitation-emission matrices. The coagulation performance of the metal salts was ferric sulfate>aluminum sulfate>ferric chloride, and DOM removal followed the trend of color>UV254>dissolved organic carbon>chemical oxygen demand (COD). Finally, a strong association was found between increasing SUVA254 and increasing DOM removal for coagulation of both leachate and natural surface water. Thus, SUVA254 is expected to be a better predictor of leachate treatability, in particular DOM removal, than the traditionally used ratio of biochemical oxygen demand to COD.