Removal of priority pollutants from water by means of dielectric barrier discharge atmospheric plasma

Evaluation of Cold Plasma-Activated water "…Enriched Metal…" Cations as an Antifungal Agent for Controlling of Penicillium italicum and Penicillium digitatum Molds

The utilization of Cold Plasma (CP) technology for decontamination and disinfection has garnered considerable attention across diverse industries. This study aims to investigate the interaction between pH and electrical conductivity (EC) (μS/cm) in Cold Plasma-Activated Water (CPAW) enriched with metal cations and its potential as an antifungal agent against two Penicillium (P.) mold strains. The investigation focuses on elucidating the augmented chemical interactions induced by plasma between radicals, charged particles, and microorganisms' cell membranes within an aqueous environment. Our findings demonstrate a positive correlation between the inactivation potential of CPAW (operating at 10 kV voltage, 2.5 kHz high frequency, and 500 mA current intensity) and pH and EC(μS/cm) values. Notably, the relative chemical reactivity and solubility of calcium oxide emerge as significant factors, highlighting the pronounced link between P. Italicum and Plasma-Activated Water containing Copper cations (CPAW + Cu2+) (p < 0.05). Our study distinctly emphasizes (1) the substantial impact of both activated water type and mold species on CFU/mL values (p < 0.05); (2) the mold-specific effect of activated water on CFU/mL; and (3) the noteworthy EC(μS/cm) enhancement and pH decrease with prolonged activation time, attaining statistical significance (p < 0.01).

Degradation of Pesticide Residues in Water, Soil, and Food Products via Cold Plasma Technology

Water, soil, and food products contain pesticide residues. These residues result from excessive pesticides use, motivated by the fact that agricultural productivity can be increased by the use of these pesticides. The accumulation of these residues in the body can cause health problems, leading to food safety concerns. Cold plasma technology has been successfully employed in various applications, such as seed germination, bacterial inactivation, wound disinfection, surface sterilization, and pesticide degradation. In recent years, researchers have increasingly explored the effectiveness of cold plasma technology in the degradation of pesticide residues. Most studies have shown promising outcomes, encouraging further research and scaling-up for commercialization. This review summarizes the use of cold plasma as an emerging technology for pesticide degradation in terms of the plasma system and configuration. It also outlines the key findings in this area. The most frequently adopted plasma systems for each application are identified, and the mechanisms underlying pesticide degradation using cold plasma technology are discussed. The possible factors influencing pesticide degradation efficiency, challenges in research, and future trends are also discussed. This review demonstrates that despite the nascent nature of the technology, the use of cold plasma shows considerable potential in regards to pesticide residue degradation, particularly in food applications.

Efficient degradation and mineralization of aniline in aqueous solution by new dielectric barrier discharge non-thermal plasma

Aniline is a priority pollutant that is unfavorable to the environment and human health due to its carcinogenic and mutagenic nature. The performance of the dielectric barrier discharge reactor was examined based on the aniline degradation efficiency. Different parameters were studied and optimized to treat various wastewater conditions. Role of active species for aniline degradation was investigated by the addition of inhibitors and promoters. The optimum conditions were 20 mg/L initial concentration, 1.8 kV applied voltage, 4 L/min gas flow rate and a pH of 8.82. It was observed that 87% of aniline was degraded in 60 min of dielectric barrier discharge treatment at optimum conditions. UV-Vis spectra showed gradual increase in the treatment efficiency of aniline with the propagation of treatment time. Mineralization of AN was confirmed by TOC measurement and a decrease in pH during the process. To elicit the aniline degradation route, HPLC and LC-MS techniques were used to detect the intermediates and byproducts. It was identified that aniline degraded into different organic byproducts and was dissociated into carbon dioxide and water. Comparison of the current system with existing advanced oxidation processes showed that DBD has a remarkable potential for the elimination of organic pollutants.

Effective degradation of lindane and its isomers by dielectric barrier discharge (DBD) plasma: Synergistic effects of various reactive species

Lindane is a broad-spectrum organochlorine insecticide which has been included in the persistent organic pollutants (POPs) list together with its two hexachlorocyclohexane (HCH) isomers. Due to its continuous use in the past decades, the environmental impacts of HCHs are still severe now. Therefore, in the present study, dielectric barrier discharge (DBD) plasma was used as an advanced oxidation process for the destruction of HCHs in water. The result indicated that in air-DBD system, over 95.4% of the initial 5 mg L-1 lindane was degraded within 60 min. Moreover, DBD plasma displayed high degradation efficiencies of other HCH isomers including α, β, and δ-HCH. Electron spin resonance spectra, scavenging experiments and theoretical calculations revealed that the synergistic effects of various reactive species were the main reason for the high efficiency of DBD plasma. For instance, both hydroxyl radicals (•OH) and electrons (e-) could initiate the degradation of HCHs, while other reactive species such as 1O2 and ONOOH played important roles in the decomposition of intermediates. Therefore, the present study not only provided an effective approach for the treatment of HCHs, but also revealed the underlying mechanism based on in-depth experimental investigation and theoretical calculation.

Toluene degradation in air/H2O DBD plasma: A reaction mechanism investigation based on detailed kinetic modeling and emission spectrum analysis

Non-thermal plasma (NTP) is emerging as an attractive method for decomposing volatile organic compounds (VOCs). In this paper, to study toluene degradation mechanism in air/H₂O dielectric barrier discharge (DBD) plasma, optical emission spectrometry (OES) was employed to in-situ monitor active species in plasma, with the permanent degradation products being detected by on-line mass spectrometry under various operations. A detailed kinetic model of NTP with incorporation of non-constant electron filed and thermal effects has also been established. A toluene degradation efficiency > 82% could be achieved at P = 115 W, C_{in, toluene} = 1000 ppm. The relative spectrum intensity of excited OH, O, H and N₂ (A³Σ⁺_u) increased with increase of discharge power and was decreased at higher gas flowrates. Toluene degradation was mainly induced by oxidation of OH and O at afterglow stage, while part of toluene was decomposed by attack of electrons and reactive particles N₂ (A³Σ⁺_u) in discharge stage. A toluene degradation pathway has been proposed as: toluene→benzyl→benzaldehyde→benzene→phenoxy→cyclopentadiene→polycarbenes/alkynol→CO₂/H₂O. Benzoquinone, benzaldehyde, cyclopentadiene and cyclopentadienyl are supposed to be important intermediates for the ring-opening of toluene. Clarification of toluene degradation behaviors at discharge and afterglowing stage could provide new insights for plasma-catalytic process in future.

The journey of prochloraz pesticide in Citrus sinensis: Residual distribution, impact on transcriptomic profiling and reduction by plasma-activated water

Prochloraz (PTIC) is a hazardous fungicide used worldwide on agricultural produce despite concerns about potential impacts on human health and environmental pollution. The residue of PTIC and its metabolite 2,4,6-trichlorophenol (2,4,6-TCP) in fresh produce has largely not been clarified. Herein, we address this research gap by examining residues of PTIC and 2,4,6-TCP in fruit of Citrus sinensis through a typical storage period. PTIC residue in the exocarp and mesocarp peaked on days 7 and 14, respectively, while 2,4,6-TCP residue gradually increased throughout storage period. Based upon gas chromatography-mass spectrometry and RNA-sequencing analysis, we reported the potential impact of residual PTIC on endogenous terpene production, and identified 11 DEGs encoding enzymes involved in terpene biosynthesis in Citrus sinensis. Additionally, we investigated both the reduction efficacy (max: 58.93%) of plasma-activated water in citrus exocarp and the minimal impact on quality attributes of citrus mesocarp. The present study not only sheds light on the residual distribution of PTIC and its impact on endogenous metabolism in Citrus sinensis, but also further provides theoretical basis for potential approaches for efficiently reducing or eliminating pesticide residues.

Advances of non-thermal plasma discharge technology in degrading recalcitrant wastewater pollutants. A comprehensive review

With development and urbanization, the amount of wastewater generated due to human activities drastically increases yearly, causing water pollution and intensifying the already worsened water crisis. Although convenient, conventional wastewater treatment methods such as activated sludge, stabilization ponds, and adsorption techniques cannot fully eradicate the complex and recalcitrant contaminants leading to toxic byproducts generation. Recent advancements in wastewater treatment techniques, specifically non-thermal plasma technology, have been extensively investigated for the degradation of complex pollutants in wastewater. Non-thermal plasma is an effective alternative for degrading and augmenting the biodegradability of recalcitrant pollutants due to its ability to generate reactive species in situ. This article critically reviews the non-thermal plasma technology, considering the plasma discharge configuration and reactor types. Furthermore, the influence of operational parameters on the efficiency of the plasma systems and the reactive species generated by the system during discharge has gained significant interest and hence been discussed. Also, the application of non-thermal plasma technology for the degradation of pharmaceuticals, pesticides, and dyes and the inactivation of microbial activities are outlined in this review article. Additionally, optimistic applications involving the combination of non-thermal plasma and catalysts and pilot and industrial-scale projects utilizing non-thermal plasma technology have been addressed. Concluding perceptions on the challenges and future perspectives of the non-thermal technology on wastewater treatment are accentuated. Overall, this review outlines a comprehensive understanding of the non-thermal plasma technology for recalcitrant pollutant degradation from a scientific perspective providing detailed instances for reference.

UV-C photon integrated surface dielectric barrier discharge hybrid reactor: A novel and energy-efficient route for rapid mineralisation of aqueous azo dyes

The study describes developing an energy-efficient and scalable alternative to conventional non-thermal plasma systems by integrating surface dielectric barrier discharge (SDBD) and UV-C radiation sources. The unprecedented enhancement in the mineralisation rate of an azo dye (brilliant red 5B) by the hybrid reactor (photo-SDBD) is demonstrated thoroughly as a function of dye concentrations, pH, and background salts. The photo-SDBD is 1.25 - 4.9 times more energy efficient than SDBD under similar experimental conditions. The photo-SDBD could overcome the problems such as the recombination of hydroxyl radicals and scavenging of radicals by salts (NaCl, Na₂SO₄, Na₂CO₃) observed in conventional non-thermal plasma systems. The TOC and HR-MS analysis establish the complete mineralisation potential and chemical mineralisation pathway. Besides, the phytotoxicity of the treated water is tested and demonstrated its utility as a liquid fertiliser for enhanced germination of mung bean seeds. The optical emission spectroscopy measurements were performed to estimate the plasma's electron temperature (1.6 ± 0.2 eV) and density (10²¹/m³). The emission line ratio (I_763.5/I_738.3) approach is used to compare the influence of UV-C on plasma parameters in the SDBD reactor. The study opens a new pathway for developing energy-efficient and scalable plasma-assisted mineralisation of complex and emerging organic pollutants.

Pathways of organic micropollutants degradation in atmospheric pressure plasma processing - A review

Concern of toxic compounds and their, potentially more harmful degradation products, present in aquatic environment alarmed scientific community and research on the development of novel technologies for wastewater treatment had become of great interest. Up to this date, many papers pointed out the challenges and limitations of conventional wastewater treatment and of some advanced oxidation processes. Advanced technologies based on the use of non-equilibrium or non-thermal plasma had been recognized as a possible solution for, not only degradation, but for complete removal of recalcitrant organic micropollutants. While previous review papers have been focused on plasma physics and chemistry of different types of discharges for few organic micropollutants, this paper brings comprehensive review of current knowledge on the chemistry and degradation pathways by using different non-thermal plasma types for several micropollutants' classes, such as pharmaceuticals, perfluorinated compounds, pesticides, phenols and dyes and points out some major research gaps.

Effects of combined treatment of plasma activated liquid and ultrasound for degradation of chlorothalonil fungicide residues in tomato

The effects of combined treatment (PAL-U) of plasma-activated liquid (PAL) including plasma-activated water (PAW) and plasma-activated buffer solution (PABS) and ultrasound (U) for the degradation of chlorothalonil fungicide on tomato fruit was investigated. Distilled water and buffer solution were activated by radiofrequency plasma jet for durations of 1, 3, 5, and 10 min to obtain PAL₁ to PAL₁₀. Fruits were immersed in PAL for 15 min and also in distilled water with sonication for 15 min for individual treatments, and in PAL with sonication for 15 min for combined treatments. The maximum chlorothalonil fungicide residues were reduced by 89.28 and 80.23% for PAW₁₀-U and PABS₁₀-U, respectively. HPLC-MS characterization revealed chlorothalonil degradation pathway and formation of 2,4,5-trichloroisophthalonitrile, 2,4-dichloroisophthalonitrile, 4-chloroisophthalonitrile, isophthalonitrile and phenylacetonitrile as degradation products. Treatments also showed no negative effects on tomato quality. Therefore, PAL and PAL-U treatments could serve as effective methods for degrading pesticides on tomatoes.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Removal of metal ions from water using oxygen plasma

Zinc ion dissolved in water is attempted to be removed by generating the oxides of zinc using the oxygen gas in dielectric barrier discharge (DBD) plasma system. The removal rate of zinc oxides’ production (ZnO and Zn(OH)₂) are measured at different treatment periods by the oxygen plasma penetration in water. The removal rate of the deposit increases initially and then decreases with the treatment period. The maximum removal rate (29%) of zinc ion from water is achieved at the treatment period of 10 min, where pH is lower (7.4). From FTIR the generation properties of zinc oxide can be recognized. Initially the amount of the deposit increases with the ozone treatment period due to production of both ZnO and Zn(OH)₂. After that, the production of Zn(OH)₄^2- increases even when the total removal rate of the deposit decreases. Therefore, to remove zinc ion from water forming metal oxide deposit, the penetration amount of the active oxygens to the water must be controlled to keep the pH lower than around 7.5. Because with increasing pH amount of removal rate of zinc oxides’ deposit decreases. The pH of the zinc dissolved water treated by ozone depends on both zinc ion and ozone concentration in water.

Removal of Pharmaceutical Residues from Water and Wastewater Using Dielectric Barrier Discharge Methods-A Review

Persistent pharmaceutical pollutants (PPPs) have been identified as potential endocrine disruptors that mimic growth hormones when consumed at nanogram per litre to microgram per litre concentrations. Their occurrence in potable water remains a great threat to human health. Different conventional technologies developed for their removal from wastewater have failed to achieve complete mineralisation. Advanced oxidation technologies such as dielectric barrier discharges (DBDs) based on free radical mechanisms have been identified to completely decompose PPPs. Due to the existence of pharmaceuticals as mixtures in wastewater and the recalcitrance of their degradation intermediate by-products, no single advanced oxidation technology has been able to eliminate pharmaceutical xenobiotics. This review paper provides an update on the sources, occurrence, and types of pharmaceuticals in wastewater by emphasising different DBD configurations previously and currently utilised for pharmaceuticals degradation under different experimental conditions. The performance of the DBD geometries was evaluated considering various factors including treatment time, initial concentration, half-life time, degradation efficiency and the energy yield (G50) required to degrade half of the pollutant concentration. The review showed that the efficacy of the DBD systems on the removal of pharmaceutical compounds depends not only on these parameters but also on the nature/type of the pollutant.

Effects of novel non-thermal atmospheric plasma treatment of titanium on physical and biological improvements and in vivo osseointegration in rats

Titanium (Ti) has achieved extensive applications due to its excellent biocompatibility and mechanical properties. Plasma can enhance surface hydrophilia of Ti with decreased carbon contamination. The traditional conditions using a single gas plasma was for longer treatment time and more prone to being contaminated. We designed and developed novel and universal apparatus and methods with a special clamping device of non-thermal atmospheric plasma (NTAP) treatment using mixed gas for Ti surface activation. We systematically and quantitatively investigated the effective effects of NTAP-Ti. The surface water contact angle decreased by 100%, the carbon content decreased by 80% and oxygen content increased by 50% in the novel NTAP-Ti surfaces. NTAP treatment accelerated the attachment, spread, proliferation, osteogenic differentiation and mineralization of MC3T3-E1 mouse preosteoblasts in vitro. The percentage of bone-to-implant contact increased by 25–40%, and the osteoclasts and bone resorption were suppressed by 50% in NTAP-Ti in vivo. In conclusion, NTAP-Ti substantially enhanced the physical and biological effects and integration with bone. The novel and universal apparatus and methods with a special clamping device using gas mixtures are promising for implant activation by swiftly and effectively changing the Ti surface to a hydrophilic one to enhance dental and orthopedic applications.

Atmospheric Plasma Supported by TiO2 Catalyst for Decolourisation of Reactive Orange 16 Dye in Water

PURPOSE

Every advanced oxidation process (AOP) has its limitations in water purification. Novel designs with simultaneous application of different AOPs can offer better solutions for cleaner water.

METHODS

We have comparatively studied two advanced oxidation processes (AOPs) on decolourisation of Reactive Orange 16 (RO 16) azo dye pollutant from water: gas plasma treatment by low power atmospheric pressure plasma using novel plasma needle configuration, and semiconductor heterogeneous photocatalysis using titanium dioxide (TiO₂) nanopowders. Additionally, simultaneous application of two advanced oxidation processes on azo dye decolourisation was studied.

RESULTS

It was found that plasma treatment is very efficient system for the dye removal even for low flow rates (1 slm) of the Ar as feed gas. The presence of 10% of O₂ in Ar flow intensified dye oxidation process and shortened required time for total decolourisation. When plasma and catalyst were simultaneously applied, TiO₂ was activated with a few Watts plasma source as well as 300 W UV lamp source. The synergic effect of two AOPs was more pronounced for higher feed gas flow rates, resulting in improved decolourisation efficiency.

CONCLUSION

Plasma needle can efficiently remove Reactive Orange 16 azo dye from water with a power consumption of only few Watts. With the addition of TiO₂ the removal efficiency is significantly improved.

A Review of Recent Advances of Dielectric Barrier Discharge Plasma in Catalysis

Dielectric barrier discharge plasma is one of the most popular methods to generate nanthermal plasma, which is made up of a host of high-energy electrons, free radicals, chemically active ions and excited species, so it has the property of being prone to chemical reactions. Due to these unique advantages, the plasma technology has been widely used in the catalytic fields. Compared with the conventional method, the heterogeneous catalyst prepared by plasma technology has good dispersion and smaller particle size, and its catalytic activity, selectivity and stability are significantly improved. In addition, the interaction between plasma and catalyst can achieve synergistic effects, so the catalytic effect is further improved. The review mainly introduces the characteristics of dielectric barrier discharge plasma, development trend and its recent advances in catalysis; then, we sum up the advantages of using plasma technology to prepare catalysts. At the same time, the synergistic effect of plasma technology combined with catalyst on methanation, CH₄ reforming, NO_x decomposition, H₂O₂ synthesis, Fischer–Tropsch synthesis, volatile organic compounds removal, catalytic sterilization, wastewater treatment and degradation of pesticide residues are discussed. Finally, the properties of plasma in catalytic reaction are summarized, and the application prospect of plasma in the future catalytic field is prospected.

Reduction of phoxim pesticide residues from grapes by atmospheric pressure non-thermal air plasma activated water

In this study, we propose a novel strategy, plasma activated water (PAW) to reduce pesticide residues on agricultural products. To validate its feasibility and effectiveness, we employee high-performance liquid chromatography (HPLC) to detect phoxim on grapes. HPLC results suggest that the reduction of phoxim on grapes achieve 73.60% after treated 10 min by PAW prepared 30 min, and the concentration of phoxim decreased significantly (p <  0.05) with the preparation time of PAW. Furthermore, HPLC-MS analysis shows that the reduction effect of phoxim by PAW is dominated by the degradation of phoxim. Combined with analyzing the physicochemical properties of PAW, one possible degradation pathway is proposed under the present experimental conditions, mediated by reactive oxygen and nitrogen species. The acidic environment (pH < 3) and high oxidation capacity (ORP > 500 mV) are suggested to be a benefit to the reduction of phoxim. Besides, the experimental results regarding color, firmness, sugar, vitamin C, and superoxide dismutase of grapes demonstrate that the PAW treatment will not significantly affect the quality of grapes. In conclusion, phoxim pesticide residues on grapes could be effectively reduced by the PAW strategy and without a significant (p <  0.05) effect on grapes quality.

Applications of Plasma-Liquid Systems: A Review

Plasma-liquid systems have attracted increasing attention in recent years, owing to their high potential in material processing and nanoscience, environmental remediation, sterilization, biomedicine, and food applications. Due to the multidisciplinary character of this scientific field and due to its broad range of established and promising applications, an updated overview is required, addressing the various applications of plasma-liquid systems till now. In the present review, after a brief historical introduction on this important research field, the authors aimed to bring together a wide range of applications of plasma-liquid systems, including nanomaterial processing, water analytical chemistry, water purification, plasma sterilization, plasma medicine, food preservation and agricultural processing, power transformers for high voltage switching, and polymer solution treatment. Although the general understanding of plasma-liquid interactions and their applications has grown significantly in recent decades, it is aimed here to give an updated overview on the possible applications of plasma-liquid systems. This review can be used as a guide for researchers from different fields to gain insight in the history and state-of-the-art of plasma-liquid interactions and to obtain an overview on the acquired knowledge in this field up to now.

Effect of Electrodes Material on the Performance of Batch Reactor Using Plasma Enhanced Technique for Wastewater Treatment

The plasma degradation process of Eosin yellow aqueous solution utilizing AC corona discharge generated above liquid with a type of pin to plate by utilizing multiple needles electrodesis investigated the influence of electrodes material and effect of ferrous sulfate on decoloration and the kinetics of process are discussed. The AC corona discharge plasma was generated in the air gap between tip of needles and the water surface. The experimental results indicate that the decoloration rate increases with using stainless steel electrodes and with increasing the concentration of FeSO4. When dye concentration is 10 mg/L with pH of 3, the air gaps were 0.85 cm and the number of pins were 30, the decoloration rate went up to 97% in 60 min.

Dimethyl phthalate elimination from micro-polluted source water by surface discharge plasma: Performance, active species roles and mechanisms

Plasticizer pollution brought huge risks to ecological environment and human health. Surface discharge plasma (SDP) was employed to eliminate plasticizer in natural water, with dimethyl phthalate (DMP) as a typical plasticizer. Experimental results showed that DMP degradation efficiency reached 82.8% within 60 min's SDP treatment, and the elimination process fitted well the first-order kinetic model. Low initial DMP concentration, alkaline condition, and low natural organic matter content were all conducive for DMP degradation. The contributions of OH radical and O₂^- to DMP elimination were 91.9% and 78.1%, respectively. Total organic carbon (TOC), UV-vis spectroscopy, and atomic force microscopy analysis demonstrated that DMP molecular structure was destroyed after the SDP treatment, and some small molecular fractions were generated. Approximately 47.8% of TOC and 73.5% of COD were eliminated after 60 min's SDP treatment. Phthalic acid monomethyl ester, phthalic acid, o-phthalic anhydride, acetic acid, formic acid, and oxalic acid were detected as the byproducts. Carbon balance analysis among these intermediates showed that total carbon content was approximately 4.64 × 10^-2 mmol before treatment, and it was 4.578 × 10^-2 mmol after treatment, suggesting that some C-containing intermediates still existed but not detected. DMP degradation pathways in the SDP system were proposed.

Comparative study on 2,4-dichlorophenoxyacetic acid and 2,4-dichlorophenol removal from aqueous solutions via ozonation, photocatalysis and non-thermal plasma using a planar falling film reactor

Ozonation and advanced oxidation processes based on photocatalysis (P.C.) and non-thermal plasma generated in a dielectric barrier discharge (DBD) in different gas atmospheres were compared for the degradation and mineralization of 2,4-dichlorophenoxy acetic acid (2,4-D) and 2,4-dichlorophenol (2,4-DCP) in aqueous solutions, using a planar falling film reactor with comparable design. The energetic yields (G₅₀) as measure of the efficiencies of the different methods are for 2,4-D in the order DBD/Ar-Fenton>ozonation>DBD/Ar>P.C.ozonation>DBD/Ar:O₂≫DBD/Air>P.C.oxidation. For 2,4-DCP the order is ozonation≫DBD/Ar-Fenton>P.C.ozonation>DBD/Ar>DBD/Ar:O₂≫P.C.oxidation>DBD/Air. The degradation by using ozone is very effective, but it should be noted that the mineralization measured by the total organic carbon (TOC) removal is low. The reason is the formation of stable towards ozone intermediates, especially low chain carboxylic acids. The fate of these intermediates during the degradation with the different methods has been followed and discussed.

Removal of 2,4-dichlorophenoxyacetic acid in aqueous solution by pulsed corona discharge treatment: Effect of different water constituents, degradation pathway and toxicity assay

A multiple pin-plane corona discharge reactor was used to generate plasma for the degradation of 2,4 dichlorophenoxyacetic acid (2,4-D) from the aqueous solution. The 2,4-D of concentration 1 mg/L was completely removed within 6 min of plasma treatment. Almost complete mineralization was achieved after the treatment time of 14 min for a 2,4-D concentration of 10 mg/L. Effects of different water constituents such as carbonates, nitrate, sulphate, chloride ions, natural organic matter (humic acids) and pH on 2,4-D degradation was studied. A significant antagonistic effect of carbonate and humic acid was observed, whereas, the effects of other ions were insignificant. A higher first order rate constant of 1.73 min^-1 was observed, which was significantly decreased in the presence of carbonate ions and humic acids. Also, a higher degradation of 2,4-D was observed in acidic pH conditions. Different 2,4-D intermediates were detected and the degradation pathway of 2,4-D in plasma treatment process was suggested. The toxicity of 10 mg/L 2,4-D was completely eradicated after 10 min of plasma treatment.

Degradation of the chlorophenoxyacetic herbicide 2,4-D by plasma-ozonation system

A novel advanced oxidation process based on the combination of ozonation with non-thermal plasma generated in a pulsed corona discharge was developed for the oxidative degradation of recalcitrant organic pollutants in water. The pulsed corona discharge in contact with liquid, operated in oxygen, produced 3.5mgL^-1 ozone, which was subsequently introduced in the ozonation reactor. The solution to be treated was continuously circulated between the plasma reactor and the ozonation reactor. The system was tested for the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) and considerably improved performance as compared to ozonation alone, both with respect to the removal of the target compound and to mineralization. The apparent reaction rate constant for 2,4-D removal was 0.195min^-1, more than two times higher than the value obtained in ozonation experiments. The mineralization reached more than 90% after 60min treatment and the chlorine balance confirms the absence of quantifiable amounts of chlorinated by-products. The energy efficiency was considerably enhanced by shortening the duration of the discharge pulses, which opens the way for further optimization of the electrical circuit design.

Removal of several pesticides in a falling water film DBD reactor with activated carbon textile: Energy efficiency

Bio-recalcitrant micropollutants are often insufficiently removed by modern wastewater treatment plants to meet the future demands worldwide. Therefore, several advanced oxidation techniques, including cold plasma technology, are being investigated as effective complementary water treatment methods. In order to permit industrial implementation, energy demand of these techniques needs to be minimized. To this end, we have developed an electrical discharge reactor where water treatment by dielectric barrier discharge (DBD) is combined with adsorption on activated carbon textile and additional ozonation. The reactor consists of a DBD plasma chamber, including the adsorptive textile, and an ozonation chamber, where the DBD generated plasma gas is bubbled. In the present paper, this reactor is further characterized and optimized in terms of its energy efficiency for removal of the five pesticides α-HCH, pentachlorobenzene, alachlor, diuron and isoproturon, with initial concentrations ranging between 22 and 430 μg/L. Energy efficiency of the reactor is found to increase significantly when initial micropollutant concentration is decreased, when duty cycle is decreased and when oxygen is used as feed gas as compared to air and argon. Overall reactor performance is improved as well by making it work in single-pass operation, where water is flowing through the system only once. The results are explained with insights found in literature and practical implications are discussed. For the used operational conditions and settings, α-HCH is the most persistent pesticide in the reactor, with a minimal achieved electrical energy per order of 8 kWh/m³, while a most efficient removal of 3 kWh/m³ or lower was reached for the four other pesticides.

Novel design of high voltage pulse source for efficient dielectric barrier discharge generation by using silicon diodes for alternating current

This work focuses on design, construction, and optimization of configuration of a novel high voltage pulse power source for large-scale dielectric barrier discharge (DBD) generation. The pulses were generated by using the high-speed switching characteristic of an inexpensive device called silicon diodes for alternating current and the self-terminated characteristic of DBD. The operation started to be powered by a primary DC low voltage power supply flexibly equipped with a commercial DC power supply, or a battery, or DC output of an independent photovoltaic system without transformer employment. This flexible connection to different types of primary power supply could provide a promising solution for the application of DBD, especially in the area without power grid connection. The simple modular structure, non-control requirement, transformer elimination, and a minimum number of levels in voltage conversion could lead to a reduction in size, weight, simple maintenance, low cost of installation, and high scalability of a DBD generator. The performance of this pulse source has been validated by a load of resistor. A good agreement between theoretically estimated and experimentally measured responses has been achieved. The pulse source has also been successfully applied for an efficient DBD plasma generation.

Research on the degradation mechanism of pyridine in drinking water by dielectric barrier discharge

Pyridine, an important chemical raw material, is widely used in industry, for example in textiles, leather, printing, dyeing, etc. In this research, a dielectric barrier discharge (DBD) system was developed to remove pyridine, as a representative type of nitrogen heterocyclic compound in drinking water. First, the influence of the active species inhibitors tertiary butanol alcohol (TBA), HCO₃^-, and CO₃^2- on the degradation rate of pyridine was investigated to verify the existence of active species produced by the strong ionization discharge in the system. The intermediate and final products generated in the degradation process of pyridine were confirmed and analyzed through a series of analytical techniques, including liquid chromatography-mass spectrometry (LC-MS), high performance liquid chromatography (HPLC), ion chromatography (IC), total organic carbon (TOC) analysis, ultraviolet (UV) spectroscopy, etc. The results showed that the degradation of pyridine was mainly due to the strong oxidizing power of ozone and hydroxyl radical produced by the DBD system. Several intermediate products including 3-hydroxyl pyridine, fumaric acid, 2, 3-dihydroxypyridine, and oxalic acid were detected. Nitrogen was removed from the pyridine molecule to form nitrate. Through analysis of the degradation mechanism of pyridine, the oxidation pathway was deduced. The study provided a theoretical and experimental basis for the application of DBD strong ionization discharge in treatment of nitrogen heterocyclic compounds in drinking water.

Hydrophobic Coatings on Cotton Obtained by in Situ Plasma Polymerization of a Fluorinated Monomer in Ethanol Solutions

Plasma polymerization using hydrophobic monomers in the gas phase is a well-known technology to generate hydrophobic coatings. However, synthesis of functional hydrophobic coatings using plasma technology in liquids has not yet been accomplished. This work is consequently focused on polymerization of a liquid fluorinated monomer on cotton fabric initiated by atmospheric plasma in a dielectric barrier discharge configuration. Functional hydrophobic coatings on cotton were successfully achieved using in situ atmospheric plasma-initiated polymerization of fluorinated monomer dissolved in ethanol. Gravimetric measurements reveal that the amount of polymer deposited on cotton substrates can be modulated with the concentration of monomer in ethanol solution, and cross-linking reactions occur during plasma polymerization of a fluorinated monomer even without the presence of a cross-linking agent. FTIR and XPS analysis were used to study the chemical composition of hydrophobic coatings and to get insights into the physicochemical processes involved in plasma treatment. SEM analysis reveals that at high monomer concentration, coatings possess a three-dimensional pattern with a characteristic interconnected porous network structure. EDX analysis reveals that plasma polymerization of fluorinated monomers takes place preferentially at the surface of cotton fabric and negligible polymerization takes place inside the cotton fabric. Wetting time measurements confirm the hydrophobicity of cotton coatings obtained although equilibrium moisture content was slightly decreased. Additionally, the abrasion behavior and resistance to washing of plasma-coated cotton has been evaluated.

A novel two-level dielectric barrier discharge reactor for methyl orange degradation

A novel pilot two-level dielectric barrier discharge (DBD) reactor has been proposed and applied for degradation of continuous model wastewater. The two-level DBD reactor was skillfully realized with high space utilization efficiency and large contact area between plasma and wastewater. Various conditions such as applied voltage, initial concentration and initial pH value on methyl orange (MO) model wastewater degradation were investigated. The results showed that the appropriate applied voltage was 13.4 kV; low initial concentration and low initial pH value were conducive for MO degradation. The percentage removal of 4 L MO with concentration of 80 mg/L reached 94.1% after plasma treatment for 80min. Based on ultraviolet spectrum (UV), Infrared spectrum (IR), liquid chromatography-mass spectrometry (LC-MS) analysis of degradation intermediates and products, insights in the degradation pathway of MO were proposed.

Design and testing of 45 kV, 50 kHz pulse power supply for dielectric barrier discharges

The design, construction, and testing of high frequency, high voltage pulse power supply are reported. The purpose of the power supply is to generate dielectric barrier discharges for industrial applications. The power supply is compact and has the advantage of low cost, over current protection, and convenient control for voltage and frequency selection. The power supply can generate high voltage pulses of up to 45 kV at the repetitive frequency range of 1 kHz-50 kHz with 1.2 kW input power. The output current of the power supply is limited to 500 mA. The pulse rise time and fall time are less than 2 μs and the pulse width is 2 μs. The power supply is short circuit proof and can withstand variable plasma load conditions. The power supply mainly consists of a half bridge series resonant converter to charge an intermediate capacitor, which discharges through a step-up transformer at high frequency to generate high voltage pulses. Semiconductor switches and amorphous cores are used for power modulation at higher frequencies. The power supply is tested with quartz tube dielectric barrier discharge load and worked stably. The design details and the performance of the power supply on no load and dielectric barrier discharge load are presented.

Removal of atrazine in water by combination of activated carbon and dielectric barrier discharge

Efficiency of modern wastewater treatment plants to remove or decompose persistent contaminants in low concentration is often insufficient to meet the demands imposed by governmental laws. Novel, efficient and cheap methods are required to address this global issue. We developed a new type of plasma reactor, in which atrazine decomposition by atmospheric dielectric barrier discharge (DBD) in dry air is combined with micropollutant adsorption on activated carbon textile and with extra bubbling of generated ozone. Investigation of reaction kinetics and by-product analysis shows that increasing input power with a factor 3.5 leads to deeper atrazine oxidation without significantly changing energy yield of atrazine removal. By-products of first and later generations are detected with HPLC-MS analysis in water and adsorbed on the activated carbon textile. Our reactor is compared in energy efficiency with reactors described in literature, showing that combination of plasma discharge with pollutant adsorption and ozone recycling is attractive for future applications of water treatment.

Rapid Nucleation of Iron Oxide Nanoclusters in Aqueous Solution by Plasma Electrochemistry

Progresses in cold atmospheric plasma technologies have made possible the synthesis of nanoparticles in aqueous solutions using plasma electrochemistry principles. In this contribution, a reactor based on microhollow cathodes and operating at atmospheric pressure was developed to synthesize iron-based nanoclusters (nanoparticles). Argon plasma discharges are generated at the tip of the microhollow cathodes, which are placed near the surface of an aqueous solution containing iron salts (FeCl2 and FeCl3) and surfactants (biocompatible dextran). Upon reaction at the plasma-liquid interface, reduction processes occur and lead to the nucleation of ultrasmall iron-based nanoclusters (IONCs). The purified IONCs were investigated by XPS and FTIR, which confirmed that the nucleated clusters contain a highly hydrated form of iron oxide, close to the stoichiometric constituents of α-FeOOH (goethite) or Fe5O3(OH)9 (ferrihydrite). Relaxivity values of r1 = 0.40 mM(-1) s(-1) and r2/r1 = 1.35 were measured (at 1.41 T); these are intermediate values between the relaxometric properties of superparamagnetic iron oxide nanoparticles used in medicine (USPIO) and those of ferritin, an endogenous contrast agent. Plasma-synthesized IONCs were injected into the mouse model and provided positive vascular signal enhancement in T1-w. MRI for a period of 10-20 min. Indications of rapid and strong elimination through the urinary and gastrointestinal tracts were also found. This study is the first to report on the development of a compact reactor suitable for the synthesis of MRI iron-based contrast media solutions, on site and upon demand.

Decomposition of atrazine traces in water by combination of non-thermal electrical discharge and adsorption on nanofiber membrane

In recent decades, several types of persistent substances are detected in the aquatic environment at very low concentrations. Unfortunately, conventional water treatment processes are not able to remove these micropollutants. As such, advanced treatment methods are required to meet both current and anticipated maximally allowed concentrations. Plasma discharge in contact with water is a promising new technology, since it produces a wide spectrum of oxidizing species. In this study, a new type of reactor is tested, in which decomposition by atmospheric pulsed direct barrier discharge (pDBD) plasma is combined with micropollutant adsorption on a nanofiber polyamide membrane. Atrazine is chosen as model micropollutant with an initial concentration of 30 μg/L. While the H2O2 and O3 production in the reactor is not influenced by the presence of the membrane, there is a significant increase in atrazine decomposition when the membrane is added. With membrane, 85% atrazine removal can be obtained in comparison to only 61% removal without membrane, at the same experimental parameters. The by-products of atrazine decomposition identified by HPLC-MS are deethylatrazine and ammelide. Formation of these by-products is more pronounced when the membrane is added. These results indicate the synergetic effect of plasma discharge and pollutant adsorption, which is attractive for future applications of water treatment.

Degradation of methylparaben in water by corona plasma coupled with ozonation

The degradation of methylparaben (MeP) in water was investigated using a pulsed corona discharge generated in oxygen, above the liquid. A comparison was made between results obtained in semi-batch corona (SBC) configuration (stationary solution, continuous gas flow) and results obtained in a semi-batch corona with recirculation combined with ozonation (SBCR + O3), where the liquid is continuously circulated between a solution reservoir and the plasma reactor and the effluent gas containing ozone is bubbled through the solution in the reservoir. It was found that MeP was completely degraded after 10-15 min of treatment in both configurations. Oxidation by ozone alone, in the absence of plasma, was a slower process. The energy efficiency for MeP removal (Y MeP) and for mineralization (Y TOC) was significantly higher in the SBCR + O3 configuration (Y MeP = 7.1 g/kWh at 90 % MeP removal and Y TOC = 0.41 g/kWh at 50 % total organic carbon (TOC) removal) than in the SBC configuration (Y MeP = 0.6 g/kWh at 90 % MeP removal and Y TOC = 0.11 g/kWh at 50 % TOC removal).

Assessment of a dielectric barrier discharge plasma reactor at atmospheric pressure for the removal of bisphenol A and tributyltin

The ability of a laboratory-scale dielectric barrier discharge (DBD) nonthermal plasma reactor at atmospheric pressure was assessed for the removal of bisphenol A (1 mg L(-1)) and tributyltin (10 mg L(-1)) from aqueous solutions. The elimination of both the compounds followed an exponential decay equation, and a first-order degradation kinetics was proposed for them (k = 0.662 min(-1) for bisphenol A and k = 0.800 min(-1) for tributyltin), reaching in both cases about 96% removal after 5-min treatment. Accordingly, plasma DBD reactors could be used as alternative advanced oxidation technologies for the removal of some persistent and toxic pollutants from water and wastewater, although further research should be performed to evaluate the effluent toxicity.