Bioelectrochemical BTEX removal at different voltages: assessment of the degradation and characterization of the microbial communities

Electro-stimulation modulates syntrophic interactions in methanogenic toluene-degrading microbiota for enhanced functionality

Syntrophy achieved via microbial cooperation is vital for anaerobic hydrocarbon degradation and methanogenesis. However, limited understanding of the metabolic division of labor and electronic interactions in electro-stimulated microbiota has impeded the development of enhanced biotechnologies for degrading hydrocarbons to methane. Here, compared to the non-electro-stimulated methanogenic toluene-degrading microbiota, electro-stimulation at 800 mV promoted toluene degradation and methane production efficiencies by 11.49 %-14.76 % and 75.58 %-290.11 %, respectively. Hydrocarbon-degrading gene bamA amplification and metagenomic sequencing analyses revealed that f_Syntrophobacteraceae MAG116 may act as a toluene degrader in the non-electro-stimulated microbiota, which was proposed to establish electron syntrophy with the acetoclastic methanogen Methanosarcina spp. (or Methanothrix sp.) through e-pili or shared acetate. In the electro-stimulated microbiota, 37.22 ± 4.33 % of Desulfoprunum sp. (affiliated f_Desulfurivibrionaceae MAG10) and 58.82 ± 3.74 % of the hydrogenotrophic methanogen Methanobacterium sp. MAG74 were specifically recruited to the anode and cathode, respectively. The potential electrogen f_Desulfurivibrionaceae MAG10 engaged in interspecies electron transfer with both syntroph f_Syntrophobacteraceae MAG116 and the anode, which might be facilitated by c-type cytochromes (e.g., ImcH, OmcT, and PilZ). Moreover, upon capturing electrons from the external circuit, the hydrogen-producing electrotroph Aminidesulfovibrio sp. MAG60 could share electrons and hydrogen with the methanogen Methanobacterium sp. MAG74, which uniquely harbored hydrogenase genes ehaA-R and ehbA-P. This study elucidates the microbial interaction mechanisms underlying the enhanced metabolic efficiency of the electro-stimulated methanogenic toluene-degrading microbiota, and emphasizes the significance of metabolic and electron syntrophic interactions in maintaining the stability of microbial community functionality.

A hybrid technique for sulfamethoxazole (SFM) removal using Enterobacter hormaechei HaG-7: Bio-electrokinetic degradation, pathway and toxicity

Prolonged exposure to antibiotics would likely favor the development of antibiotic resistance and their gene transfer among bacterial communities that are responsible for enriched antibiotic resistant microbes. Sulfamethoxazole (SFM) is a commonly used antibiotic that is released into the environment through human and animal wastes. Improper degradation of SFM poses severe threats to mankind and all life forms. The present study aims in analyzing the process and the probability of utilizing bio-electrokinetic degradation for elimination of SFM from artificially contaminated soil employing Enterobacter hormaechei HaG-7. The desired optimal conditions for SFM degradation (∼98%) were observed at SFM initial concentration (100 mg/L) with an inoculum dose (1% v/v) and applied potential voltage (1.5 V) at pH (7). The results indicated efficient and complete degradation of SFM when compared with the conventional biodegradation.

Impact of Voltage Application on Degradation of Biorefractory Pharmaceuticals in an Anaerobic-Aerobic Coupled Upflow Bioelectrochemical Reactor

Diclofenac, ibuprofen, and carbamazepine are frequently detected in the environment, where they pose a threat to organisms and ecosystems. We developed anaerobic-aerobic coupled upflow bioelectrochemical reactors (AO-UBERs) with different voltages, hydraulic retention times (HRTs), and types of electrode conversion, and evaluated the ability of the AO-UBERs to remove the three pharmaceuticals. This study showed that when a voltage of 0.6 V was applied, the removal rate of ibuprofen was slightly higher in the system with aerobic cathodic and anaerobic anodic chambers (60.2 ± 11.0%) with HRT of 48 h than in the control systems, and the removal efficiency reached stability faster. Diclofenac removal was 100% in the 1.2 V system with aerobic anodic and anaerobic cathodic chambers, which was greater than in the control system (65.5 ± 2.0%). The contribution of the aerobic cathodic-anodic chambers to the removal of ibuprofen and diclofenac was higher than that of the anaerobic cathodic-anodic chambers. Electrical stimulation barely facilitated the attenuation of carbamazepine. Furthermore, biodegradation-related species (Methyloversatilis, SM1A02, Sporomusa, and Terrimicrobium) were enriched in the AO-UBERs, enhancing pharmaceutical removal. The current study sheds fresh light on the interactions of bacterial populations with the removal of pharmaceuticals in a coupled system.

Self-produced biophotosensitizers enhance the degradation of organic pollutants in photo-bioelectrochemical systems

Bioelectrochemical systems (BESs) with integrated photoactive components have been shown to be a promising strategy for enhancing the performance for bioenergy generation and pollutant removal. This study revealed an efficient photo-BES with an enhanced pollutant degradation rate by utilizing self-produced biomolecules as photosensitizers in situ. Results showed that the BES could increase the coulombic efficiency from 60.8% to 73.0% and the degradation rate of bisphenol A (BPA) from 0.030 to 0.189 h^-1 when the suspension in the reactor was illuminated with simulated sunlight in the absence of any external photosensitizers. We identified that the regular BES released many organic substances into the reactor during operation. These substances, including dissolved biomolecules and solid cell residues, were photoactive for producing hydroxyl radicals during light illumination. Quenching experiments verified that the •OH generated from the self-produced biophotosensitizers contributed to the enhanced degradation of BPA. Additionally, the phototransformation of biophotosensitizers was also observed in photo-BES. The quantity of tyrosine protein-like components decreased, but that of the humic components remained relatively stable. Our findings imply that BESs with integrated self-produced biophotosensitizers may be promising for constructing advanced electrochemical and biological systems for synchronous bioelectricity production and degradation of organic pollutants in wastewater treatments.

Enhanced Exoelectrogenic Activity of Cupriavidus metallidurans in Bioelectrochemical Systems through the Expression of a Constitutively Active Diguanylate Cyclase

Electroactive bacteria have a wide range of applications, including electricity production, bioremediation, and the sensing of toxic compounds. Bacterial biofilm formation is often mediated by the second messenger cyclic guanosine monophosphate (c-di-GMP) synthesized by a diguanylate cyclase (DGC). The role of c-di-GMP in the expression of c-type cytochromes has been previously reported. The aim of this study was to determine the bioelectrogenic activity of Cupriavidus metallidurans strain CH34 pJBpleD*, which possesses a constitutively active DGC that increases c-di-GMP levels. Notably, the heterologous expression of the constitutively active DGC in C. metallidurans strain CH34 pJBpleD* showed a higher biofilm formation and increased the electrical current production up to 560%. In addition, C. metallidurans CH34 pJBpleD* showed increased levels of c-type cytochrome-associated transcripts compared with the wild-type strain CH34. Scanning electron microscopies revealed a denser extracellular matrix with an increased exopolymeric substance content in the CH34 pJBpleD* biofilm on the electrode surface. The results of this study suggest that higher levels of c-di-GMP synthesized by a constitutively active diguanylate cyclase in C. metallidurans strain CH34 pJBpleD* activated the formation of an electroactive biofilm on the electrode, enhancing its exoelectrogenic activity.

Mass transfer and reaction simultaneously enhanced airlift microbial electrolytic cell system with high gaseous o-xylene removal capacity

To overcome the limitation of mass transfer and reaction rate involved in the biodegradation of gaseous o-xylene, the airlift reactor and microbial electrolysis cell were integrated to construct an airlift microbial electrolysis cell (AL-MEC) system for the first time, in which the bioanode was modified by polypyrrole to further improve biofilm attachment. The developed AL-MEC system achieved 95.4% o-xylene removal efficiency at optimized conditions, and maintained around 75% removal efficiency even while the inlet o-xylene load was as high as 684 g m^-3 h^-1. The existence of O₂ exhibited a competition in electrons with the bioanode but a positive effect on ring-opening process in the o-xylene oxidation. The limitation of mass transfer had been overcome as the empty bed resistance time in the range of 20-80 s did not influence the system performance significantly. The microbial community analysis confirmed the o-xylene degradation microbes and electroactive bacteria were the dominant, which could be further enriched at 0.3 V against standard hydrogen electrode. This work revealed the feasibility of the AL-MEC system for the degradation of o-xylene and similar compounds, and provided insights into bioelectrochemical system design with high gaseous pollution removal capacity.

"Self-degradation" of 2-chlorophenol in a sequential cathode-anode cascade mode bioelectrochemical system

A sequential cathode-anode cascade mode bioelectrochemical system (BES) was designed and developed to achieve the "self-degradation" of 2-chlorophenol (2-CP). With the cooperation of cathode and anode, the electrons supplied for the cathode 2-CP dechlorination come from its own dechlorinated product in the anode, phenol. Separate degradation experiments of cathode 2-CP and anode phenol were firstly conducted. The optimum concentration ratio of anode acetate to phenolic compound (3.66/1.56) and the phenolic compound degradation ability of BES were investigated. With the formation of the bioanode able to degrade phenol, the sequential cathode-anode cascade mode BES was further developed, where 2-CP could achieve sequential dechlorination and ring-cleavage degradation. When applied voltage was 0.6 V and cathode influent pH was 7, 1.56 mM 2-CP reached 80.15% cathode dechlorination efficiency and 58.91% total cathode-anode phenolic compounds degradation efficiency. The bioanodes played a decisive role in BES. Different operating conditions would affect the overall performance of BES by changing the electrochemical activity and microbial community structure of the bioanodes. This study demonstrated the feasibility of the sequential cathode-anode cascade mode BES to degrade 2-CP wastewater and provided perspectives for the cooperation of cathode and anode, aiming to explore more potential of BES in wastewater treatment field.

Bioelectricity production and xylene biodegradation through double chamber benthic microbial fuel cells fed with sugarcane waste as a substrate

Xylene, a recalcitrant compound present in wastewater from activities of petrochemical and chemical industries causes chronic problems for living organisms and the environment. Xylene contaminated wastewater may be biodegraded through a benthic microbial fuel cell (BMFC) as seen in this study. Xylene was oxidized into intermediate 3-methyl benzoic acid and entirely converted into non-toxic carbon dioxide. The highest voltage of the BMFC reactor was generated at 410 mV between 23 and 90 days when cell potential was 1 kΩ. The reactor achieved a maximum power density of about 63 mW/m², and a current of 0.4 mA which was optimized from variable resistance (20 Ω - 1 kΩ). However, the maximum biodegradation efficiency of the BMFC was at 87.8%. The cyclic voltammetry curve helped to determine that the specific capacitance was 0.124 F/g after 30 days of the BMFC operation. Furthermore, the fitting equivalent circuit was observed with the help of Nyquist plot for calculating overall internal resistance of 65.82 Ω on 30th day and 124.5 Ω on 80th day. Staphylococcus edaphicus and Staphylococcus sparophiticus were identified by 16S rRNA sequencing as the dominant species in the control and BMFC electrode, presumably associated with xylene biodegradation.

Bioremediation of polluted soil due to tsunami by using recycled waste glass

In this research, bioremediation of tsunami-affected polluted soil has been conducted by using collective microorganisms and recycled waste glass. The Tohoku earthquake, which was a mega earthquake in Japan triggered a huge tsunami on March 11th, 2011 that caused immeasurable damage to the geo-environmental conditions by polluting the soil with heavy metals and excessive salt content. Traditional methods to clean this polluted soil was not possible due to the excess cost and efforts. Laboratory experiments were conducted to examine the capability of bioremediation of saline soil by using recycled waste glass. Different collective microorganisms which were incubated inside the laboratory were used. The electrical conductivity (EC) was measured at different specified depths. It was noticed that the electrical conductivity decreased with the assist of the microbial metabolisms significantly. Collective microorganisms (CM2) were the highly capable to reduce salinity (up to 75%) while using recycled waste glass as their habitat.

Biodegradation of gaseous xylene in a flat composite membrane bioreactor

The xylene is an important hydrophobic volatile organic compound (VOC) widely used as a solvent in different industries. Compared to the conventional bioreactors, the membrane bioreactor is more efficient for the degradation of hydrophobic VOCs. In this work, the degradation of gaseous xylene in a flat composite membrane bioreactor inoculated with activated sludge under different operating conditions was investigated. The maximum elimination capacities, EC_v of 289 g/(m³ h) and EC_m of 0.145 g/(m² h) were obtained at the gas residence time of 20 s and the loading rate of 475 g/(m³ h). Moreover, the membrane bioreactor is stable enough to suffer weak shock loading and short intermittent process shutdown. These results indicate that the membrane biotechnology shows great potentials in practical applications for xylene removal.

Advancement in Benthic Microbial Fuel Cells toward Sustainable Bioremediation and Renewable Energy Production

Anthropogenic activities are largely responsible for the vast amounts of pollutants such as polycyclic aromatic hydrocarbons, cyanides, phenols, metal derivatives, sulphides, and other chemicals in wastewater. The excess benzene, toluene and xylene (BTX) can cause severe toxicity to living organisms in wastewater. A novel approach to mitigate this problem is the benthic microbial fuel cell (BMFC) setup to produce renewable energy and bio-remediate wastewater aromatic hydrocarbons. Several mechanisms of electrogens have been utilized for the bioremediation of BTX through BMFCs. In the future, BMFCs may be significant for chemical and petrochemical industry wastewater treatment. The distinct factors are considered to evaluate the performance of BMFCs, such as pollutant removal efficiency, power density, and current density, which are discussed by using operating parameters such as, pH, temperature and internal resistance. To further upgrade the BMFC technology, this review summarizes prototype electrode materials, the bioremediation of BTX, and their applications.

Bioelectrochemically enhanced degradation of bisphenol S: mechanistic insights from stable isotope-assisted investigations

Electroactive microbes is the driving force for the bioelectrochemical degradation of organic pollutants, but the underlying microbial interactions between electrogenesis and pollutant degradation have not been clearly identified. Here, we combined stable isotope-assisted metabolomics (SIAM) and 13C-DNA stable isotope probing (DNA-SIP) to investigate bisphenol S (BPS) enhanced degradation by electroactive mixed-culture biofilms (EABs). Using SIAM, six 13C fully labeled transformation products were detected originating via hydrolysis, oxidation, alkylation, or aromatic ring-cleavage reactions from 13C-BPS, suggesting hydrolysis and oxidation as the initial and key degradation pathways for the electrochemical degradation process. The DNA-SIP results further displayed high 13C-DNA accumulation in the genera Bacteroides and Cetobacterium from the EABs and indicated their ability in the assimilation of BPS or its metabolites. Collectively, network analysis showed that the collaboration between electroactive microbes and BPS assimilators played pivotal roles the improvement in bioelectrochemically enhanced BPS degradation.

Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Monoaromatic compounds (MACs) are typical refractory organic pollutants which are existing widely in various environments. Biodegradation strategies are benign while the key issue is the sustainable supply of electron acceptors/donors. Bioelectrochemical system (BES) shows great potential in this field for providing continuous electrons for MACs degradation. Phenol and BTEX (Benzene, Toluene, Ethylbenzene and Xylenes) can utilize anode to enhance oxidative degradation, while chlorophenols, nitrobenzene and antibiotic chloramphenicol (CAP) can be efficiently reduced to less-toxic products by the cathode. However, there still have several aspects need to be improved including the scale, electricity output and MACs degradation efficiency of BES. This review provides a comprehensive summary on the BES degradation of MACs, and discusses the advantages, future challenges and perspectives for BES development. Instead of traditional expensive dual-chamber configurations for MACs degradation, new single-chamber membrane-less reactors are cost-effective and the hydrogen generated from cathodes may promote the anode degradation. Electrode materials are the key to improve BES performance, approaches to increase the biofilm enrichment and conductivity of materials have been discussed, including surface modification as well as composition of carbon and metal-based materials. Besides, the development and introduction of functional microbes and redox mediators, participation of sulfur/hydrogen cycling may further enhance the BES versatility. Some critical parameters, such as the applied voltage and conductivity, can also affect the BES performance, which shouldn't be overlooked. Moreover, sequential cathode-anode cascaded mode is a promising strategy for MACs complete mineralization.

Enhancement of gaseous o-xylene degradation in a microbial fuel cell by adding Shewanella oneidensis MR-1

An exoelectrogens, Shewanella oneidensis MR-1 (S. oneidensis MR-1), was supplied to a microbial fuel cell (MFC) to enhance the degradation of a recalcitrant organic compound, o-xylene. The experimental results revealed that, with the addition of the S. oneidensis MR-1, the o-xylene removal efficiency increased by 35-76% compared with the original MFC. The presence of the S. oneidensis MR-1 not only improved the activity of the biofilm in the bioanode but also developed the connections between the bacteria by nanowires. Therefore, the maximum power density increased from 52.1 to 92.5 mW/m³ after the addition of the S. oneidensis MR-1. The microbial community analysis showed that adding the S. oneidensis MR-1 increased the biodiversity in bioanode. The dominant exoelectrogens shifted from Zoogloea sp., Delftia sp., Achromobacter sp., Acinetobacter sp., Chryseobacterium sp., and Stenotrophomonas sp. to Zoogloea sp., Delftia sp., Shewanella sp., Achromobacter sp., Hydrogenophaga sp., Sedimentibacter sp. and Chryseobacterium sp.. Furthermore, the cyclic voltammetry analysis showed that the outer membrane bound protein complex of OmcA-MtrCAB was involved as direct electron transfer pathway in the S. oneidensis MR-1 containing bioanode. We believed that this work is promising to provide optional strategy for efficient VOCs degradation by adjusting the microbial community in the bioanode.

Kinetics of biocathodic electron transfer in a bioelectrochemical system coupled with chemical absorption for NO removal

A microbial electrolysis cell (MEC) has been developing for enhanced absorbent regeneration in a chemical absorption-biological reduction integrated process for NO removal. In this work, the kinetics of electron transfer involved in the biocathodes along Fe(III)EDTA and Fe(II)EDTA-NO reduction was analyzed simultaneously. A modified Nernst-Monod kinetics considering the Faraday efficiency was applied to describe the electron transfer kinetics of Fe(III)EDTA reduction. The effects of substrate concentration, biocathodic potential on current density predicted by the model have been validated by the experimental results. Furthermore, extended from the kinetics of Fe(III)EDTA reduction, the electron transfer kinetics of Fe(II)EDTA-NO reduction was developed with a semi-experimental method, while both direct electrochemical and bioelectrochemical processes were taken into consideration at the same time. It was revealed that the developed model could simulate the electron transfer kinetics well. This work could not only help advance the biocathodic reduction ability and the utilization efficiency of electric power, but also provide insights into the industrial scale-up and application of the system.

Anaerobic digestion of sludge filtrate assisted by symbionts of short chain fatty acid-oxidation syntrophs and exoelectrogens: Process performance, methane yield and microbial community

Sludge filtrate is a kind of special organic wastewater generated from hydrothermally pretreated sewage sludge. The efficient treatment of sludge filtrate can promote the development of sludge recycling technology. Herein, the anaerobic baffled reactor (ABR) assisted by symbionts of short chain fatty acid-oxidation syntrophs (SFAS) and exoelectrogens was applied to treat the sludge filtrate. The influence of fermentation temperature and promotion of methanogenesis via symbionts were focused. The results showed that the COD removal efficiency and methane yield of the ABR system assisted by symbionts at 35 °C (R3) were 11.7% and 11.0% higher than the one at 55 °C (R2), respectively. And the COD removal efficiency and methane yield of the R2 system were 9.1% and 12.9% higher than the traditional ABR system at 55 °C (R1), respectively. Large abundances of exoelectrogens such as Thermincola and Geobacter were found in the R2 and R3 systems, respectively. Moreover, ample Syntrophobacter, Syntrophomonas and Methanobacterium were detected in both R2 and R3 systems. The present research revealed the importance of SFAS, exoelectrogens and hydrogenotrophic methanogens for the improvement of methanogenesis. Besides, the mesophilic condition is conducive to enhancing the methanogenesis rate of sludge filtrate.

Structure and Functions of Hydrocarbon-Degrading Microbial Communities in Bioelectrochemical Systems

Bioelectrochemical systems (BESs) exploit the interaction between microbes and electrodes. A field of application thereof is bioelectrochemical remediation, an effective strategy in environments where the absence of suitable electron acceptors limits classic bioremediation approaches. Understanding the microbial community structure and genetic potential of anode biofilms is of great interest to interpret the mechanisms occurring in BESs. In this study, by using a whole metagenome sequencing approach, taxonomic and functional diversity patterns in the inoculum and on the anodes of three continuous-flow BES for the removal of phenol, toluene, and BTEX were obtained. The genus Geobacter was highly enriched on the anodes and two reconstructed genomes were taxonomically related to the Geobacteraceae family. To functionally characterize the microbial community, the genes coding for the anaerobic degradation of toluene, ethylbenzene, and phenol were selected as genetic markers for the anaerobic degradation of the pollutants. The genes related with direct extracellular electron transfer (EET) were also analyzed. The inoculum carried the genetic baggage for the degradation of aromatics but lacked the capacity of EET while anodic bacterial communities were able to pursue both processes. The metagenomic approach provided useful insights into the ecology and complex functions within hydrocarbon-degrading electrogenic biofilms.

Remediation of BTEX and Cr(VI) contamination in soil using bioelectrochemical system-an eco-friendly approach

Soil contamination with benzene, toluene, ethylbenzene and xylene isomers (BTEX) has raised increasing concern because of its high solubility in water and toxicity to biotic communities. This study aims at investigating the process and prospects of deploying bioelectrochemical system (BES) for the removal of BTEX from artificially contaminated soil using Pseudomonas putida YNS1, alongside the reduction of hexavalent chromium (Cr(VI)). The BES was setup with desired operating conditions: initial concentration of BTEX (50-400 mg/L in 100 mL of sterilized water), pH (4-10) and applied potential voltage (0.6-1.2 V) with 10 μL log-phase culture along with the addition of Cr(VI) (10 mg/L). Samples were collected at regular intervals and analysed for BTEX degradation using gas chromatography and Cr(VI) reduction using UV-Vis spectrophotometer. Under optimized conditions (initial BTEX concentration, 200 mg/L; pH 7; and applied voltage 0.8 V with Cr(VI) of 10 mg/L), 92% of BTEX was degraded and 90% Cr(VI) was reduced from the contaminated soil. The intermediates produced during degradation were analysed through gas chromatography-flame ionization detector (GC-FID), and the possible degradation pathway was elucidated. The results indicated that BES could be effective for simultaneous degradation of BTEX along with Cr(VI) reduction.

Microbial electrochemistry for bioremediation

Lack of suitable electron donors or acceptors is in many cases the key reason for pollutants to persist in the environment. Externally supplementation of electron donors or acceptors is often difficult to control and/or involves chemical additions with limited lifespan, residue formation or other adverse side effects. Microbial electrochemistry has evolved very fast in the past years - this field relates to the study of electrochemical interactions between microorganisms and solid-state electron donors or acceptors. Current can be supplied in such so-called bioelectrochemical systems (BESs) at low voltage to provide or extract electrons in a very precise manner. A plethora of metabolisms can be linked to electrical current now, from metals reductions to denitrification and dechlorination. In this perspective, we provide an overview of the emerging applications of BES and derived technologies towards the bioremediation field and outline how this approach can be game changing.

Progress Towards Bioelectrochemical Remediation of Hexavalent Chromium

Chromium is one of the most frequently used metal contaminants. Its hexavalent form Cr(VI), which is exploited in many industrial activities, is highly toxic, is water-soluble in the full pH range, and is a major threat to groundwater resources. Alongside traditional approaches to Cr(VI) treatment based on physical-chemical methods, technologies exploiting the ability of several microorganisms to reduce toxic and mobile Cr(VI) to the less toxic and stable Cr(III) form have been developed to improve the cost-effectiveness and sustainability of remediating hexavalent chromium-contaminated groundwater. Bioelectrochemical systems (BESs), principally investigated for wastewater treatment, may represent an innovative option for groundwater remediation. By using electrodes as virtually inexhaustible electron donors and acceptors to promote microbial oxidation-reduction reactions, in in situ remediation, BESs may offer the advantage of limited energy and chemicals requirements in comparison to other bioremediation technologies, which rely on external supplies of limiting inorganic nutrients and electron acceptors or donors to ensure proper conditions for microbial activity. Electron transfer is continuously promoted/controlled in terms of current or voltage application between the electrodes, close to which electrochemically active microorganisms are located. Therefore, this enhances the options of process real-time monitoring and control, which are often limited in in situ treatment schemes. This paper reviews research with BESs for treating chromium-contaminated wastewater, by focusing on the perspectives for Cr(VI) bioelectrochemical remediation and open research issues.

Enhanced degradation of triphenyl phosphate (TPHP) in bioelectrochemical systems: Kinetics, pathway and degradation mechanisms

Triphenyl phosphate (TPHP) is one of the major organophosphate esters (OPEs) with increasing consumption. Considering its largely distribution and high toxicity in aquatic environment, it is important to explore an efficient treatment for TPHP. This study aimed to investigate the accelerated degradation of TPHP in a three-electrode single chamber bioelectrochemical system (BES). Significant increase of degradation efficiency of TPHP in the BES was observed compared with open circuit and abiotic controls. The one-order degradation rates of TPHP (1.5 mg L^-1) were increased with elevating sodium acetate concentrations and showed the highest value (0.054 ± 0.010 h^-1) in 1.0 g L^-1 of sodium acetate. This result indicated bacterial metabolism of TPHP was enhanced by the application of micro-electrical field and addition acetate as co-substrates. TPHP could be degraded into diphenyl phosphate (DPHP), hydroxyl triphenyl phosphate (OH-TPHP) and three byproducts. DPHP was the most accumulated degradation product in BES, which accounted more than 35.5% of the initial TPHP. The composition of bacterial community in BES electrode was affected by the acclimation by TPHP, with the most dominant bacteria of Azospirillum, Petrimonas, Pseudomonas and Geobacter at the genera level. Moreover, it was found that the acute toxic effect of TPHP to Vibrio fischeri was largely removed after the treatment, which revealed that BES is a promising technology to remove TPHP threaten in aquatic environment.

Effects of Olive and Pomegranate By-Products on Human Microbiota: A Study Using the SHIME® in Vitro Simulator

Two by-products containing phenols and polysaccharides, a “pâté” (OP) from the extra virgin olive oil milling process and a decoction of pomegranate mesocarp (PM), were investigated for their effects on human microbiota using the SHIME^® system. The ability of these products to modulate the microbial community was studied simulating a daily intake for nine days. Microbial functionality, investigated in terms of short chain fatty acids (SCFA) and NH₄⁺, was stable during the treatment. A significant increase in Lactobacillaceae and Bifidobacteriaceae at nine days was induced by OP mainly in the proximal tract. Polyphenol metabolism indicated the formation of tyrosol from OP mainly in the distal tract, while urolithins C and A were produced from PM, identifying the human donor as a metabotype A. The results confirm the SHIME^® system as a suitable in vitro tool to preliminarily investigate interactions between complex botanicals and human microbiota before undertaking more challenging human studies.

Geological gas-storage shapes deep life

Around the world, several dozen deep sedimentary aquifers are being used for storage of natural gas. Ad hoc studies of the microbial ecology of some of them have suggested that sulfate reducing and methanogenic microorganisms play a key role in how these aquifers' communities function. Here, we investigate the influence of gas storage on these two metabolic groups by using high-throughput sequencing and show the importance of sulfate-reducing Desulfotomaculum and a new monophyletic methanogenic group. Aquifer microbial diversity was significantly related to the geological level. The distance to the stored natural gas affects the ratio of sulfate-reducing Firmicutes to deltaproteobacteria. In only one aquifer, the methanogenic archaea dominate the sulfate-reducers. This aquifer was used to store town gas (containing at least 50% H₂ ) around 50 years ago. The observed decrease of sulfates in this aquifer could be related to stimulation of subsurface sulfate-reducers. These results suggest that the composition of the microbial communities is impacted by decades old transient gas storage activity. The tremendous stability of these gas-impacted deep subsurface microbial ecosystems suggests that in situ biotic methanation projects in geological reservoirs may be sustainable over time.

Efficient reduction of nitrobenzene by sulfate-reducer enriched biocathode in microbial electrolysis cell

This study aimed to enhance treatment of wastewater containing nitrobenzene (NB) and sulfate using biocathode enriched with sulfate-reducing bacteria in microbial electrolysis cell (MEC). Artificial wastewater with 50 mg L^-1 NB and 200 mg L^-1 sulfate was used as the catholyte. With 0.8 V applied voltage, removal efficiencies of NB and sulfate reached 98% and 34%, respectively, within 36 h. Aniline and sulfide were the main reductive products in the catholyte with concentrations increased to 0.32 and 0.51 mM, which accounted for 97% and 78% of the removed NB and sulfate, respectively. Sulfate-reducer Desulfovibrio sp. and Wolinella sp. played the dominant role in the biocathode for the reductions of sulfate and NB. Analyses of scanning electron microscope and X-ray photoelectron spectroscopy showed the formation of elemental S on the biocathode surface. The relative abundance of sulfur-oxidizing bacterium Thioclava sp. reached 24% on the biocathode. The results indicated that the oxidation process from S^2- to S⁰ occurred on the biocathode, which provided electrons to biofilm for NB reduction. The MEC with sulfate-reducer enriched biocathode can be used as an alternative to treat complex wastewater containing NB and sulfate.

Combining electrokinetic transport and bioremediation for enhanced removal of crude oil from contaminated marine sediments: Results of a long-term, mesocosm-scale experiment

Marine sediments represent an important sink of harmful petroleum hydrocarbons after an accidental oil spill. Electrobioremediation techniques, which combine electrokinetic transport and biodegradation processes, represent an emerging technological platform for a sustainable remediation of contaminated sediments. Here, we describe the results of a long-term mesocosm-scale electrobioremediation experiment for the treatment of marine sediments contaminated by crude oil. A dimensionally stable anode and a stainless-steel mesh cathode were employed to drive seawater electrolysis at a fixed current density of 11 A/m². This approach allowed establishing conditions conducive to contaminants biodegradation, as confirmed by the enrichment of Alcanivorax borkumensis cells harboring the alkB-gene and other aerobic hydrocarbonoclastic bacteria. Oil chemistry analyses indicated that aromatic hydrocarbons were primarily removed from the sediment via electroosmosis and low molecular weight alkanes (nC₆ to nC₁₀) via biodegradation.

A novel exoelectrogen from microbial fuel cell: Bioremediation of marine petroleum hydrocarbon pollutants

In the past decades, the microbial fuel cell (MFC) technology has caught the attention of the scientific community for its potential in transforming petroleum hydrocarbon (PHC) pollutants directly into electricity through microbial catalyzed anodic. The microbe was one of the most important factors that both influence MFCs and PHC degradation. Here we aimed to identify new microbes to expand the list of microbial species which are both electrogenic and diesel hydrocarbon degrading. In this text, we depicted a strain of microbe named E2, isolated from on the anode surface of MFC, and using diesel as sole carbon source. E2 exhibited electrochemical activity in cyclic voltammetry curve, implicating that it had electrogenic ability. E2 degraded about 50% diesel (3.26 g/L) in maximum during 8 days. Pyrosequencing of 16S rRNA gene of E2 revealed E2 was a sub-strain of Vibrio. Corresponding to salt and alkali tolerant properties of vibrio, the optimal condition for E2 in degrading diesel was 3%-4% in salinity, and pH 8-9 in mineral medium. Collectively, as a member of Gammaproteobacteria class, E2 was novel marine microbe both electricity generation and diesel degradation, which may attract its future application toward artificial microbial community construction in MFC in promoting the PHC pollution removal.

Anode potential selection for sulfide removal in contaminated marine sediments

Sulfate reducing microorganisms are typically involved in hydrocarbon biodegradation in the sea sediment, with their metabolism resulting in the by-production of toxic sulfide. In this context, it is of utmost importance identifying the optimal value for anodic potential which ensures efficient toxic sulfide removal. Along this line, in this study the (bio)electrochemical removal of sulfide was tested at anodic potentials of -205 mV, +195 mV and +300 mV (vs Ag/AgCl), also in the presence of a pure culture of the sulfur-oxidizing bacterium Desulfobulbus propionicus. Current production, sulfide concentration and sulfate concentration were monitored over time. At the end of the experiment sulfur deposition on the electrodes and the microbial communities were characterized by SEM-EDS and by next generation sequencing of the 16S rRNA gene respectively. Results confirmed that current production was linked to sulfide removal and D. propionicus promoted back oxidation of deposited sulfur to sulfate. The highest electron recovery was observed at +195 mV vs Ag/AgCl, and the lowest sulfur deposition was obtained at -205 mV vs Ag/AgCl anode polarization.

Simultaneous autotrophic removal of sulphate and nitrate at different voltages in a bioelectrochemical reactor (BER): Evaluation of degradation efficiency and characterization of microbial communities

The autotrophic removal of sulphate and nitrate in bioelectrochemical reactors was investigated at different external voltages (0.2, 0.4, 0.6, 0.8 and 1.0 V) under anaerobic conditions. Sulphate and nitrate removal, nitrite accumulation, reduction trend of nitrate and sulphate and microbial community structure were explored. Results indicate the highest removal efficiencies of nitrate and sulphate at 43.3 ± 2.8 and 7.1 ± 0.2 mg·l^-1·d^-1 when the voltage is 0.6 V. Moreover, nitrite accumulation decreases with increased voltage from 0.2 V to 1.0 V. Illumina high-throughput sequencing results show similar richness and diversity of bacterial species with increased voltage from 0.2 V to 0.8 V. However, with further increased voltage to 1.0 V, bacterial diversity and richness decrease significantly. Overall, significant differences in community compositions are observed at different voltages.

Sulfate-reducing mixed communities with the ability to generate bioelectricity and degrade textile diazo dye in microbial fuel cells

The biotreatment of recalcitrant wastes in microbial fuel cells (MFCs) rather than chemical, physical, and advanced oxidation processes is a low-cost and eco-friendly process. In this study, sulfate-reducing mixed communities in MFC anodic chamber were employed for simultaneous electricity generation, dye degradation, and sulfate reduction. A power generation of 258 ± 10 mW/m² was achieved under stable operating conditions in the presence of electroactive sulfate-reducing bacteria (SRB). The SRBs dominant anodic chambers result in dye, chemical oxygen demand (COD), and sulfate removal of greater than 85% at an initial COD (as lactate)/SO₄^2- mass ratio of 2.0 and dye concentration of 100 mg/L. The effects of the COD/SO₄^2- ratio (5.0:1.0-0.5:1.0) and initial diazo dye concentration (100-1000 mg/L) were studied to evaluate and optimize the MFC performance. Illumina Miseq technology for bacterial community analysis showed that Proteobacteria (89.4%), Deltaproteobacteria (52.7%), and Desulfovibrio (48.2%) were most dominant at phylum, class, and genus levels, respectively, at the MFC anode. Integration of anaerobic SRB culture in MFC bioanode for recalcitrant chemical removal and bioenergy generation may lead to feasible option than the currently used technologies in terms of overall pollutant treatment.

Removal of benzene, toluene, xylene and styrene by biotrickling filters and identification of their interactions

Biotrickling filters (BTFs) are becoming very potential means to purify waste gases containing multiple VOC components, but the removal of the waste gases by BTF has been a major challenge due to the extremely complicated interactions among the components. Four biotrickling filters packed with polyurethane foam were employed to identify the interactions among four aromatic compounds (benzene, toluene, xylene and styrene). The elimination capacities obtained at 90% of removal efficiency for individual toluene, styrene and xylene were 297.02, 225.27 and 180.75 g/m3h, respectively. No obvious removal for benzene was observed at the inlet loading rates ranging from 20 to 450 g/m3h. The total elimination capacities for binary gases significantly decreased in all biotrickling filters. However, the removal of benzene was enhanced in the presence of other gases. The removal capacities of ternary and quaternary gases were further largely lowered. High-throughput sequencing results revealed that microbial communities changed greatly with the composition of gases, from which we found that: all samples were dominated either by the genus Achromobacter or the Burkholderia. Different gaseous combination enriched or inhibited some microbial species. Group I includes samples of BTFs treating single and binary gases and was dominated by the genus Achromobacter, with little Burkholderia inside. Group II includes the rest of the samples taken from BTFs domesticated with ternary and quaternary gases, and was dominated by the genus Burkholderia, with little Achromobacter detected. These genera were highly associated with the biodegradation of benzene series in BTFs.