Post-functionalization of UiO-66-NH2 by 2,5-Dimercapto-1,3,4-thiadiazole for the high efficient removal of Hg(II) in water

Recyclable Fe3O4@UiO-66-PDA core-shell nanomaterials for extensive metal ion adsorption: Batch experiments and theoretical analysis

With the ever-increasing challenge of heavy metal pollution, the imperative for developing highly efficient adsorbents has become apparent to remove metal ions from wastewater completely. In this study, we introduce a novel magnetic core-shell adsorbent, Fe3O4@UiO-66-PDA. It features a polydopamine (PDA) modified zirconium-based metal-organic framework (UiO-66) synthesized through a simple solvothermal method. The adsorbent boasts a unique core-shell architecture with a high specific surface area, abundant micropores, and remarkable thermal stability. The adsorption capabilities of six metal ions (Fe3+, Mn2+, Pb2+, Cu2+, Hg2+, and Cd2+) were systematically investigated, guided by the theory of hard and soft acids and bases. Among these, three representative metal ions (Fe3+, Pb2+, and Hg2+) were scrutinized in detail. The activated Fe3O4@UiO-66-PDA exhibited exceptional adsorption capacities for these metal ions, achieving impressive values of 97.99 mg/g, 121.42 mg/g, and 130.72 mg/g, respectively, at pH 5.0. Moreover, the adsorbent demonstrated efficient recovery from aqueous solution using an external magnet, maintaining robust adsorption efficiency (>80%) and stability even after six cycles. To delve deeper into the optimized adsorption of Hg2+, density functional theory (DFT) analysis was employed, revealing an adsorption energy of -2.61 eV for Hg2+. This notable adsorption capacity was primarily attributed to electron interactions and coordination effects. This study offers valuable insights into metal ion adsorption facilitated, by magnetic metal-organic framework (MOF) materials.

Cysteamine-Anchored MOF through Post-Synthetic Modification Strategy for the Effective Removal of Mercury from Water

The introduction of cysteamine functionality, referred to as Q-ZIF-67-SH, was successfully achieved through postsynthetic modification while maintaining the structural and thermal stability of the quasi metal-organic framework Q-ZIF-67. By subjecting ZIF-67 to controlled partial deligandation at 310 °C under an air atmosphere, a substantial number of unsaturated cobalt sites were generated within the quasi ZIF-67 (Q-ZIF-67) structure. These unsaturated cobalt sites facilitated effective coordination with cysteamine, resulting in the development of the thiol-functionalized framework Q-ZIF-67-SH. The potential of these metal-organic frameworks (MOFs) for the adsorptive removal of hazardous Hg(II) was investigated. Various factors, such as the type of sorbent, pH, adsorbent dosage, initial concentration of Hg(II), and presence of coexisting ions, were thoroughly examined and comprehensively explained. Thiol-anchored MOF significantly enhanced the efficiency of Hg(II) removal, achieving an impressive removal rate of up to 99.2%. Furthermore, it demonstrated a maximum adsorption capacity of 994 mg g-1 and a distribution coefficient of 2.5 × 106 mL g-1. A good correspondence with pseudo-second-order kinetics and the Langmuir model was observed through the fitting of adsorption kinetics and the isotherm model. The thermodynamic data strongly indicate that the adsorptive removal of Hg(II) is characterized by endothermicity and spontaneity. This signifies that the process is energetically favorable and has potential for efficient Hg(II) removal. Therefore, the Q-ZIF-67-SH sorbent emerges as a promising and advantageous option for the removal of Hg(II) from water.

Core-shell design of UiO66-Fe3O4 configured with EDTA-assisted washing for rapid adsorption and simple recovery of heavy metal pollutants from soil

The coupling of washing with adsorption process can be adopted for the treatment of soils contaminated with heavy metals pollution. However, the complex environment of soil and the competitive behavior of leaching chemicals considerably restrain adsorption capacity of adsorbent material during washing process, which demands a higher resistance of the adsorbents to interference. In this study, we synthesized strongly magnetic, high specific surface area (573.49 m2/g) UiO66 composites (i.e., UiO66-Fe3O4) using hydrothermal process. The UiO66-Fe3O4 was applied as an adsorbent during the ethylene diamine tetraacetic acid (EDTA)-assisted washing process of contaminated soil. The incorporation of UiO66-Fe3O4 results in rapid heavy metal removal and recovery from the soil under low concentrations of washing agent (0.001 mol/L) with reduced residual heavy metal mobility of soil after remediation. Furthermore, UiO66-Fe3O4 can quickly recollect by an external magnet, which offers a simple and inexpensive recovery method for heavy metals from contaminated soil. Overall, UiO66-Fe3O4 configuration with EDTA-assisted washing process showed opportunities for heavy metals contaminated sites.

Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress

Metal-organic frameworks (MOFs) have emerged as highly promising adsorbents for removing heavy metals from wastewater due to their tunable structures, high surface areas, and exceptional adsorption capacities. This review meticulously examines and summarizes recent advancements in producing and utilizing MOF-based adsorbents for sequestering heavy metal ions from water. It begins by outlining and contrasting commonly employed methods for synthesizing MOFs, such as solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical. Rather than delving into the specifics of adsorption process parameters, the focus shifts to analyzing the adsorption capabilities and underlying mechanisms against critical metal(loid) ions like chromium, arsenic, lead, cadmium, and mercury under various environmental conditions. Additionally, this article discusses strategies to optimize MOF performance, scale-up production, and address environmental implications. The comprehensive review aims to enhance the understanding of MOF-based adsorption for heavy metal remediation and stimulate further research in this critical field. In brief, this review article presents a comprehensive overview of the contemporary information on MOFs as an effective adsorbent and the challenges being faced by these adsorbents for heavy metal mitigation (including stability, cost, environmental issues, and optimization), targeting to develop a vital reference for future MOF research.

Selective removal of Hg(II) by chitosan derivative covalently modified with double cross-linking agents abundant in N and S atoms

With rapid industrialization and urbanization, numerous wastewater contains elevated concentration of Hg(II), and its concentration must be reduced to the discharge limit, so as not to cause serious pollution to the environment. In this paper, a modified chitosan adsorbent material, AMT-DMTD-CS (CS = chitosan, AMT = 2-amino-5-mercapto-1,3,4-thiadiazole, DMTD = 1,3,4-thiadiazole-2,5-dithiol) was prepared. FT-IR, XPS, elemental analysis, and FE-SEM confirmed that AMT and DMTD were successfully grafted covalently onto CS, with BET analysis showing a specific surface area of 105.55 m2/g for AMT-DMTD-CS. Adsorption study suggests that the optimal pH environment for AMT-DMTD-CS to adsorb Hg(II) is 4.0, and the saturated uptake capacity reaches 687.17 mg/g at 318 K, even after eight regenerations, the removal is still maintained at 80.06 %. Moreover, the adsorption behavior is in perfect agreement with the pseudo-second order kinetic model and the Langmuir isotherm model. In addition, AMT-DMTD-CS shows quite favorable selectivity for Hg(II) in a variety of co-existing metal ions. According to the FT-IR and XPS analysis of AMT-DMTD-CS-Hg(II), the synergistic complexation of -OH, -NH2, -NH, CN, CS and -SH to Hg(II) is considered as the main reason that leading to the elevated adsorption capacity.

Recent Development of Metal-Organic Frameworks for Water Purification

Water contamination is an increasing concern to mankind because of the increasing amount of pollutants in aquatic ecosystems. To purify the polluted water, various techniques have been used to remove hazardous components. Unfortunately, traditional cleanup techniques with a low uptake capacity are unable to achieve water purification. Metal-organic frameworks (MOFs) have recently shown potential in effective water pollutant isolation in terms of selectivity and adsorption capacity over traditional porous materials. The high surface area and versatile functionality of MOFs allow for the development of new adsorbents. The development of MOFs in a range of water treatments in the recent five years will be highlighted in this review, along with assessments of the adsorption performance relevant to the particular task. Moreover, the outlook on future opportunities for water purification using MOFs is also provided.

Silver Nanoparticle-Functionalized Postsynthetically Modified Thiol MOF UiO-66-NH-SH for Efficient CO2 Fixation

Thiols are essential functional groups imparting unique properties, such as reactivity and selectivity, to many vital enzymes and biomolecules. The integration of electronically soft thiol groups within metal-organic frameworks (MOFs) yields elevated reactivity and a pronounced affinity for soft metal ions. However, the scarcity of thiol-based ligands and synthetic challenges hinder the advancement of thiol-based MOFs. To bypass the difficulties of synthesizing thiol MOFs by a direct reaction between thiol-based ligands and corresponding metal salts, postsynthetic modification (PSM) of MOFs is an efficient strategy to introduce thiol functionality. Herein, we have introduced Ag nanoparticles in postsynthetically modified thiol MOFs UiO-66-NH-SH (1) (synthesized by reaction between UiO-66-NH2 and thioglycolic acid) and UiO-66-NH-SH (2) (synthesized by reaction between UiO-66-NH2 and 3-mercaptopropionic acid) to synthesize a series of heterogeneous catalysts for CO2 fixation. Catalysts Cat 1-2 and Cat 3 - 4 were synthesized from UiO-66-NH-SH (1) and UiO-66-NH-SH (2), respectively, by using varying concentrations of silver (AgNO3). Catalyst Ag@UiO-66-NH-SH (1) (Ag = 3.45%; namely Cat 2) shows the highest efficiency for the catalytic conversion of propargylic alcohol and terminal epoxide to the corresponding cyclic carbonates. Finally, a rationalized reaction mechanism is proposed by correlating our results with the current literature. This work presents a viable strategy to utilize the thiol functionality of MOFs (avoiding the complexities associated with synthesizing thiol MOFs directly from thiol ligands) as a platform for introducing catalytically active metal centers and applying them as a heterogeneous catalyst for CO2 fixation reactions.

Harnessing the Chemical Functionality of Metal-Organic Frameworks Toward Removal of Aqueous Pollutants

Wastewater treatment has been bestowed with a plethora of materials; among them, metal-organic frameworks (MOFs) are one such kind with exceptional properties. Besides their application in gas adsorption and storage, they are applied in many fields. In orientation toward wastewater treatment, MOFs have been and are being successfully employed to capture a variety of aqueous pollutants, including both organic and inorganic ones. This review sheds light on the postsynthetic modifications (PSMs) performed over MOFs to adsorb and degrade recalcitrant. Modifications performed on the metal nodes and the linkers have been explained with reference to some widely used chemical modifications like alkylation, amination, thiol addition, tandem modifications, and coordinate modifications. The boost in pollutant removal efficacy, reaction rate, adsorption capacity, and selectivity for the modified MOFs is highlighted. The rationale and the robustness of micromotor MOFs, i.e., MOFs with motor activity, and their potential application in the capture of toxic pollutants are also presented for readers. This review also discusses the challenges and future recommendations to be considered in performing PSM over a MOF concerning wastewater treatment.

Intelligent quantitative recognition of sulfide using machine learning-based ratiometric fluorescence probe of metal-organic framework UiO-66-NH2/Ppix

Sulfides possess either high toxicity or play crucial physiological role such as gas transmitter dependent upon dosage, hence the significant for their rapid sensitive and selective concentration determination. Herein, a machine learning enhanced ratiometric fluorescence sensor was engineered for sulfide determination by incorporating the nanometal-organic framework (UiO-66-NH2) along with protoporphyrin IX (Ppix). The blue fluorescence at 431 nm originated from the moiety of UiO-66-NH2 by 365 nm excitation serves as an internal calibration reference signal, while the red fluorescence at 629 nm from the moiety of Ppix serves as the analytical signal, and the intensity is correlated to the amount of sulfides. The fluorescence color of the sensor gradually varies from blue to red upon sequential addition of copper and sulfide ions, resulting in RGB (Red, Green, Blue) feature values for corresponding sulfide concentrations, which facilities the advanced data processing techniques using machine learning algorithms. On the basis of fluorescence image fingerprint extraction and machine learning algorithms, an online data analysis model was developed to improve the precision and accuracy of sulfide determination. The established model employed Linear Discriminant Analysis (LDA) and was subjected to rigorous cross-validation to ensure its robustness. By analyzing the correlation between RGB feature values and sulfide concentrations, the study highlighted a significant positive relationship between the red feature values and sulfide concentrations. The application of machine learning techniques on the ratiometric fluorescence signal of the UiO-66-NH2/Ppix probe demonstrated its potential for intelligent quantitative determination of sulfides, offering a valuable and efficient tool for pollution detection and real-time rapid environmental monitoring.

Recent trends in wastewater treatment by using metal-organic frameworks (MOFs) and their composites: A critical view-point

Respecting the basic need of clean and safe water on earth for every individual, it is necessary to take auspicious steps for waste-water treatment. Recently, metal-organic frameworks (MOFs) are considered as promising material because of their intrinsic features including the porosity and high surface area. Further, structural tunability of MOFs by following the principles of reticular chemistry, the MOFs can be functionalized for the high adsorption performance as well as adsorptive removal of target materials. However, there are still some major concerns associated with MOFs limiting their commercialization as promising adsorbents for waste-water treatment. The cost, toxicity and regenerability are the major issues to be addressed for MOFs to get insightful results. In this article, we have concise the current strategies to enhance the adsorption capacity of MOFs during the water-treatment for the removal of toxic dyes, pharmaceuticals, and heavy metals. Further, we have also discussed the role of metallic nodes, linkers and associated functional groups for effective removal of toxic water pollutants. In addition to conformist overview, we have critically analyzed the MOFs as adsorbents in terms of toxicity, cost and regenerability. These factors are utmost important to address before commercialization of MOFs as adsorbents for water-treatment. Finally, some future perspectives are discussed to give directions for potential research.

A novel magnetic Ti-MOF/chitosan composite for efficient adsorption of Pb(II) from aqueous solutions: Synthesis and investigation

In this investigation, a composite material comprising Ti-MOF and chitosan, denoted as BD-MOF(Ti)@CS/Fe3O4, was successfully designed for the efficient adsorption of Pb(II) from aqueous solutions. A comprehensive array of characterization techniques, including SEM, XRD, BET, FT-IR, and XPS, were meticulously employed to scrutinize the structural attributes and morphological features of the Pb(II) adsorbent. Notably, the material exhibits adaptability to a broad pH range, with adsorption efficiency reaching 99 % between pH 3 and 6. Kinetic studies reveal that the adsorption process of Pb(II) by BD-MOF(Ti)@CS/Fe3O4 adheres closely to a pseudo-second-order kinetic model. Impressively, within a short duration of 40 min, the adsorption efficiency can reach 85 %. Furthermore, the adsorption isotherm aligns with the Hill isotherm model, signifying cooperative adsorption. This observation underscores the synergistic interplay among the functional groups on the surface of BD-MOF(Ti)@CS/Fe3O4 in capturing Pb(II). As per the Hill model, the theoretical maximum capacity was an impressive 944.9 mg/g. Thermodynamic assessments suggested that the adsorption process was spontaneous, entropy increasing and exothermic. Even in the presence of various interfering ions, BD-MOF(Ti)@CS/Fe3O4 exhibited robust adsorption performance, thereby affirming its utility in complex environments. Moreover, the material demonstrates noteworthy reusability, sustaining effective Pb(II) removal across five consecutive cycles in aqueous solutions.

Multifunctional In-MOF and Its S-Scheme Heterojunction toward Pollutant Decontamination via Fluorescence Detection, Physical Adsorption, and Photocatalytic REDOX

A novel doubly interpenetrated indium-organic framework of 1 has been assembled by In3+ ions and highly conjugated biquinoline carboxylate-based bitopic connectors (H2L). The isolated 1 exhibits an anionic framework possessing channel-type apertures repleted with exposed quinoline N atoms and carboxyl O atoms. Owing to the unique architecture, 1 displays a durable photoluminescence effect and fluorescence quenching sensing toward CrO42-, Cr2O72-, and Cu2+ ions with reliable selectivity and anti-interference properties, fairly high detection sensitivity, and rather low detection limits. Ligand-to-ligand charge transition (LLCT) was identified as the essential cause of luminescence by modeling the ground state and excited states of 1 using DFT and TD-DFT. In addition, the negatively charged framework has the ability to rapidly capture single cationic MB, BR14, or BY24 and their mixture, including the talent to trap MB from the (MB + MO) system with high selectivity. Moreover, intrinsic light absorption capacity and band structure feature endow 1 with effective photocatalytic decomposition ability toward reactive dyes RR2 and RB13 under ultraviolet light. Notably, after further polishing the band structure state of 1 by constructing the S-scheme heterojunction of In2S3/1, highly efficient photocatalytic detoxification of Cr(VI) and degradation of reactive dyes have been fully achieved under visible light. This finding may open a new avenue for designing novel multifunctional MOF-based platforms to address some intractable environmental issues, i.e., detection of heavy metal ions, physical capture of pony-sized dyes, and photochemical decontamination of ultrastubborn reactive dyes and highly toxic Cr(VI) ions from water.

A novel fluorescent sensor with an overtone peak reference for highly sensitive detection of mercury (II) ions and hydrogen sulfide: Mechanisms and applications in environmental monitoring and bioanalysis

The present study introduces a novel fluorescent sensor with an overtone peak reference designed for the detection of mercury (Ⅱ) ions (Hg2+) and hydrogen sulfide (H2S). The study proposes two novel response mechanisms that hinges on the synergistic effect of cation exchange dissociation (CED) and photo-induced electron transfer (PET). This sensor exhibits a remarkable detection limit of 2.9 nM for Hg2+. Additionally, the sensor reacts with H2S to generate nickel sulfide (NiS) semiconductor nanoparticles, which amplify the fluorescence signal and enable a detection limit of 3.1 nM for H2S. The detection limit for H2S is further improved to 29.1 pM through the surface functionalization of the nanomaterial with pyridine groups (increasing reactivity) and chelation of gold nanoparticles (AuNPs), which enhances the sensor's specificity. This improvement is primarily due to the surface plasmon resonance (SPR) of AuNPs and their affinity for H2S. The single-emission strategy can yield skewed results due to environmental changes, whereas the overtone peak reference strategy enhances result accuracy and reliability by detecting environmental interference through reference emission peaks. In another observation, the low-toxicity dihydropyrene-bipyridine nanorods (TPP-BPY) has been successfully utilized for both endogenous and exogenous H2S detection in vivo using a mouse model. The successful development of TPP-BPY is expected to provide an effective tool for studying the role of H2S in biomedical systems.

PVA/PAA/DMTD electrospun nanofibrous membrane for the selective adsorption of Pb(II) ions in liquid foods

Lead (Pb(II)) contamination is common in liquid foods and can result from Pb(II) being present in the raw materials or during handling processes. However, due to the complexity of food matrices, there is limited data available concerning Pb(II) ion removal from food sources. This study focused on fabricating a PVA/PAA/DMTD electrospun nanofibrous membrane (ENFM) to efficiently and selectively remove Pb(II) ions from liquid foods. The PVA/PAA/DMTD ENFM had a maximum adsorption capacity of 138.3 mg/g for Pb(II) ions and demonstrated high selectivity toward the removal of Pb(II) ions. Negative values of the Gibbs free energy (ΔG°) showed that the spontaneous nature of the adsorption process was feasible at different temperatures. Moreover, it successfully removed Pb(II) ions from selected samples of commercially available drinks. Therefore, this adsorbent exhibits significant potential for removing Pb(II) ions from liquid food products, thereby reducing daily dietary exposure to Pb(II).

Robust functionalized cellulose-based porous composite for efficient capture and ultra-fast desorption of aqueous heavy metal pollution

The heavy metal pollution control industry requires convenient and cost-effective solutions to address complex aqueous environment. Adsorption method can be an effective strategy to realize these goals. Considering the importance of environmental and sustainable development strategies, there is an urgent need to develop efficient, green and non-toxic heavy metal adsorbents. In this work, a robust aminated cellulose-based porous adsorbent (PGPW) was developed from delignified wood and amino-rich polymer using a solvent-free, mild, simple and efficient preparation method. Such adsorbent exhibited excellent adsorption capacity (188.68 mg g-1) for Cu(II), and its adsorption behavior was consistent with pseudo-second order kinetic and Langmuir isotherm models. Notably, PGPW with superior compressibility could be squeezed to achieve rapid desorption and reach equilibrium within 5 min, while still retaining 87 % adsorption efficiency after 50 cycles. In addition, PGPW showed remarkable selectivity towards various coexisting ionic systems and demonstrated a considerable adsorption capacity in natural water applications. The adsorption mechanism of heavy metal ions on porous adsorption material was elucidated. This approach provides a simple, gentle and sustainable strategy for preparing functionalized wood-based composites with efficient adsorption and ultra-fast desorption of heavy metal ions.

Synthetic of functionalized magnetic titanium-based metal-organic frameworks to efficiently remove Hg(Ⅱ) from wastewater

The rapid development of process technology has led to rapid daily industrial production, which also produced a large amount of waste liquid. At the same time, the existing treatment technology cannot keep up with the demand, resulting in the malicious destruction of the environment by wastewater, especially mercury-containing wastewater was very harmful. Effective means of removing mercury ions need to be found. With magnetic ferric oxide as the core and titanium-based metal-organic frameworks as the shell, a new type of magnetic adsorbent (BTA-MIL-125(Ti)@Fe3O4) was synthesized. Materials were tested by multiple characterization methods and multiple sets of experiments. At optimal pH 6, the removal rate in 100 ppm Hg(Ⅱ) was as high as 95.8%. The theoretical adsorption capacity was 615 mg/L. Isothermal experiments, kinetic experiments and thermodynamic experiments have respectively verified that the material was a kind of adsorption material with self-emission heat based on chemical action and synergistic adsorption with Hill model. By simulating the immunity of a variety of ions (Cu, Zn, Mg, Ni, Cd), the material itself also exhibited a very high affinity for Hg(Ⅱ). The results of five high-cycle stable adsorption proved the repeatable stability of the material itself. Various characterization methods have also shown that nitrogen and sulfur-containing groups chelated with Hg(Ⅱ). All of the above was enough to show that the BTA-MIL-125(Ti)@Fe3O4 was a magnetic adsorption material with excellent performance and great prospects.

Synthesis of salicylaldehyde tailored PAMAM dendrimers/chitosan for adsorption of aqueous Hg(II): Performance and mechanism

Water pollution caused by Hg(II) exerts hazardous effect to environmental safety and human health. Herein, a family of salicylaldehyde tailored poly(amidoamine) (PAMAM) dendrimers/chitosan composites (G0-S/CTS, G1-S/CTS, and G2-S/CTS) were prepared and used for the removal of Hg(II) from water solution. The adsorption performance of the as-prepared composites for Hg(II) was thoroughly demonstrated by determining various influencing factors. G0-S/CTS, G1-S/CTS and G2-S/CTS exhibited competitive adsorption capacity and good adsorption selective property for Hg(II). The maximum adsorption capacity of G0-S/CTS, G1-S/CTS and G2-S/CTS for Hg(II) were 1.86, 2.18 and 4.47 mmol‧g-1, respectively. The adsorption for Hg(II) could be enhanced by raising initial Hg(II) concentration and temperature. The adsorption process was dominated by film diffusion processes with monolayer adsorption behavior. The functional groups of NH2, CONH, CN, OH, CO and CN were mainly responsible for the adsorption of Hg(II). G0-S/CTS, G1-S/CTS and G2-S/CTS displayed good regeneration property and the regenerate rate maintained 95.00 % after five adsorption-desorption cycles. The as-prepared adsorbents could be potentially used for the efficient removal of Hg(II) from aqueous solution.

An Aryl-ether-linked Covalent Organic Framework Modified with Thioamide Groups for Selective Extraction of Palladium from Strong Acid Solutions

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl-ether-linked covalent organic framework (COF-316-DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF-316-DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF-316-DM to withstand irradiation doses of 200 or 400 kGy of β/γ ray. Furthermore, COF-316-DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g-1 ), and excellent reusability in 4 M nitric acid. Moreover, COF-316-DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT-IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions.

Simultaneous detection and removal of mercury (II) using multifunctional fluorescent materials

Environmental problems caused by mercury ions are increasing due to growing industrialization, poor enforcement, and inefficient pollutant treatment. Therefore, detecting and removing mercury from the ecological chain is of utmost significance. Currently, a wide range of small molecules and nanomaterials have made remarkable progress in the detection, detoxification, adsorption, and removal of mercury. In this review, we summarized the recent advances in the design and construction of multifunctional materials, detailed their sensing and removing mechanisms, and discussed with emphasis the advantages and disadvantages of different types of sensors. Finally, we elucidated the problems and challenges of current multifunctional materials and further pointed out the direction for the future development of related materials. This review is expected to provide a guideline for researchers to establish a robust strategy for the detection and removal of mercury ionsin the environment.

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

Selective adsorption of mercury ion from water by a novel functionalized magnetic Ti based metal-organic framework composite

In the context of industrialization and severe wastewater pollution, mercury ions pose a major threat due to their high toxicity. However, traditional adsorbents and common metal-organic framework (MOF) materials have limited effectiveness. This study focuses on combining magnetic materials with functionalized titanium-based MOF composite (SNN-MIL-125(Ti)@Fe3O4) to improve mercury ion adsorption. Through comprehensive characterization and analysis, the adsorption performance and mechanism of the material were studied. The optimal adsorption of the material was achieved at pH 5, exhibiting a pseudo-second-order adsorption model and the Hill theoretical capacity of 668.98 mg/g. Hill and Tempkin models confirmed the presence of chemical and physical adsorption sites on the material surface. Thermodynamic experiments showed a spontaneous endothermic process. Despite the presence of interfering ions, the material exhibited high selectivity for mercury ions. After four cycles, adsorption performance decreased by only 8%, indicating excellent reusability. Nitrogen- and sulfur-containing functional groups played a key role in mercury ion adsorption. In conclusion, SNN-MIL-125(Ti)@Fe3O4, as a magnetic MOF adsorption material, showed potential for effective remediation of mercury-contaminated wastewater. This study contributes to the development of efficient adsorption materials and enhances the understanding of their mechanism.

Efficient and selective removal of mercury ions from aqueous solution by 2,5-dimercaptothiadiazole covalently grafted chitosan derivative

The increasingly serious problem of mercury pollution has caused wide concern, and exploring the adsorbent materials with high adsorption capacity is a simple and effective approach to address this concern. In this study, chitosan (CS), 2,5-dimercaptothiadiazole (DMTD) and formaldehyde solution are used as raw materials to prepare the modified CS material (DMTD-CS) by one-pot method. Adequate characterizations suggest that DMTD-CS is highly cross-linked, and the specific surface area and pore volume are 126.91 m2/g and 0.6702 cm3/g, respectively. By investigating the Hg(II) adsorption properties of DMTD-CS, the maximum adsorption capacity at 318 K reaches 628.09 mg/g, this value is higher than that of CS and most of the reported CS derivatives. Adsorption kinetics and isotherms indicate that the adsorption behaviors of DMTD-CS conform to the pseudo-second-order kinetic model and Langmuir isotherm model, and in the coexistence of various metal ions, DMTD-CS shows very good selectivity for Hg(II). Additionally, the removal of DMTD-CS to Hg(II) is still at 80.06 % after six adsorption-desorption cycles, demonstrating outstanding recyclability. The further FT-IR and XPS analysis suggest that the synergistic complexation of O, N and S atoms on DMTD-CS with Hg(II) is an important factor leading to the high adsorption capacity.

Functional Materials for Water Restoration: A "Fish Cage" for Efficient Capture of Pb(II) Ions

In this work, a "fish cage" material for trapping Pb(II) ions has been successfully obtained, which is a novel clathrate functionalized metal-oganic framework (Cage-MOF) by introducing free adsorption sites (SO42-). The three-dimensional (3D) cage structure of Cage-MOF gives it a larger contact area and can capture "swimming fish" (Pb(II)) like a "fishing cage" in a water solution. This is the first high-efficiency adsorption material obtained by introducing free coordination groups. Cage-MOF not only has excellent water stability but also improves the selectivity and affinity for Pb(II) ions in water because of the presence of sulfate adsorption sites, and its adsorption capacity is as high as 806 mg/g. This work shows a novel and effective idea for the synthesis of water restoration materials.

Scalable Underwater Adhesives with High-Strength, Long-Term, and Harsh-Environment Adhesion Enabled by Heterocyclic Chemistry

Developing scalable and high-performance underwater adhesives is important in various biomedical and industrial applications. However, despite massive efforts, the realization of such adhesives remains a challenging task, as mainly imposed by the difficulty in balancing the interfacial and bulk properties via an efficient way. Here, we report a facile yet effective strategy to construct a novel underwater adhesive with multiple advantaged performances by virtue of heterocyclic chemistry. This adhesive is designed with the cooperation of a heterocycle-based versatile adhesive functionality and an eco-friendly hydrophilic matrix with cross-linkable sites, which allows water absorption to destroy hydration layer, diverse molecular interactions to enhance interfacial adhesion, and abundant covalent crosslinks to strengthen bulk cohesion. Such a rational design endows the adhesive with strong underwater adhesion (up to 1.16 MPa for wood and 0.36 MPa for poly(tetrafluoroethylene) (PTFE)), long-term durability (maintaining pristine strength even after 4 months), and harsh-environment stability (salt, acidic/alkaline, low/high-temperature solutions). This strategy is also generic to derive more adhesive formulas, which offers a new direction for designing the next-generation underwater adhesives with high performance and scalability for practical applications.

Synthesis of Highly Efficient and Recyclable Bimetallic Cox-Fe1-x-MOF for the Synthesis of Xanthan and Removal of Toxic Pb2+ and Cd2+ Ions

Mono-(Fe) and bimetallic Co_x-Fe_1-x-MOF with different Co and Fe contents was successfully synthesized by the solvothermal method. The structural properties of the prepared samples were characterized by X-ray diffraction, transmission electron microscopy (TEM), Brunauer-Emmett-Teller specific surface area, and Fourier transform infrared spectroscopy. The results revealed the successful formation of mono and mixed Co_x-Fe_1-x-MOF. Also, the results of TEM displayed that the particle structure of Co_x-Fe_1-x-MOF changed to octahedral after the addition of cobalt. The surface acidity results illustrated that the samples showed both Lewis and Brønsted acid sites, and Co_x-Fe_1-x-MOF possessed more surface acidity than Fe-MOF. The catalytic performance of the prepared samples was tested by synthesis of 14-phenyl-14H-dibenzo [a, j] xanthene (xanthene), and bimetallic Co_x-Fe_1-x-MOF showed higher activity compared to monometallic Fe-MOF. The sample with Co_0.50-Fe_0.50-MOF gave the highest yield of xanthene with 90.2%. In addition, the prepared samples were used for removal of Pb²⁺ and Cd²⁺ ions from the aqueous solution. The sample with Co_0.50-Fe_0.50-MOF showed the highest removal efficiency compared with mono- and other bimetallic samples. The results illustrated that the addition of Co to Fe enhanced the structural properties, acidity, and catalytic performance of the prepared samples due to the synergistic effect between Fe and Co ions. According to the obtained results, the prepared samples showed great potentials for the synthesis of pharmacologically active compounds and environmental protection.

Synthesis and Application of a Novel Metal-Organic Frameworks-Based Ion-Imprinted Polymer for Effective Removal of Co(II) from Simulated Radioactive Wastewater

In this work, a novel metal-organic frameworks (MOFs)-based ion-imprinted polymer (MIIP) was prepared to remove Co(II) from simulated radioactive wastewater. The batch experiments indicated that the sorption was well described by the pseudo-second-order kinetic and Langmuir models, and it is monolayer chemisorption. The theoretical maximum sorption capacity was estimated to be 181.5 mg∙g^-1, which is by far the reported maximum value of Co(II) sorption by the imprinted materials. The MIIP presented an excellent selectivity for Co(II) in the presence of common monovalent and divalent metal ions, and the selectivity coefficients were 44.31, 33.19, 10.84, 27.71, 9.45, 16.25, and 7.60 to Li(I), K(I), Mg(II), Ca(II), Mn(II), Ba(II), and Cd(II), respectively. The sorption mechanism was explored by X-ray photoelectron spectroscopy (XPS) technology and density functional theory (DFT) calculations, suggesting that Co(II) was adsorbed by the MIIP via the chelation of 4-vinylpyridine (VP) ligands with Co(II), which was a spontaneous process, and the optimal coordination ratio of VP to Co(II) was 6. This work suggested that the MIIP has a high sorption capacity and excellent selectivity for Co(II), which is of great significance for the selective separation of Co-60 from radioactive wastewater.

Cocoyam powder extracted from Colocasia antiquorum as a novel plant-based bioflocculant for industrial wastewater treatment: Flocculation performance and mechanism

In the current investigation, the comparative study of cocoyam bioflocculant (CYBF) and chemical flocculant for the removal of heavy metals, COD, BOD, TDS, TSS, sulphate and nitrate from tannery effluent, and dyes from synthetic dye wastewater were examined. Different analytical techniques, including Fourier transforms infrared (FTIR), X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDX), were used to characterise the extracted bioflocculant. FTIR spectral measurement of the bioflocculant demonstrated the presence of hydroxyl, carboxyl, and amino groups. By using bioflocculant, the highest removal of TSS (85.5%), TDS (76.2%), BOD (74%), COD (50.5%), sulphate (54.4%), nitrate (52%), Lead (65%), Chromium (60%), Nickel (57.9%), from tannery effluent was achieved at pH 6 and bioflocculant dosage of 8 mg/L. While, 80% congo red, 79% methyl orange, 73% safranin, and 72% methylene blue were removed from synthetic dye wastewater by cocoyam bioflocculant. Two flocculation mechanisms were found for dye removal, electrostatic force of attraction, and hydrogen bonding. In the case of metal adsorption, only electrostatic interactions were observed between metal ions and functional groups of bioflocculant. The cocoyam bioflocculant exhibited excellent flocculation efficacy and thus can be used in wastewater treatment to remove heavy metals and other pollutants.

High selective removal towards Hg(II) from aqueous solution with magnetic diatomite-based adsorbent functionalized by poly(3-aminothiophenol): conditional optimization, application, and mechanism

A novel diatomite-based (DMT) material was obtained by post-functionalization of DMT/CoFe₂O₄ with 3-aminothiophenol and applied to remove Hg(II) ions from aqueous solution. The obtained adsorbent of DMT/CoFe₂O₄-p-ATP was detected by various characterization means. The optimization of response surface methodology reveals that magnetic diatomite-based material of DMT/CoFe₂O₄-p-ATP has an optimal adsorption capability of 213.2 mg/g towards Hg(II). The removal process of Hg(II) is fitted well to pseudo-second-order and Langmuir models, respectively, indicating that the adsorption process is controlled by monolayer chemisorption. DMT/CoFe₂O₄-p-ATP exhibits superior affinity towards Hg(II) through electrostatic attraction and surface chelation, compared with other coexisting heavy metal ions. Meanwhile, the prepared adsorbent DMT/CoFe₂O₄-p-ATP displays excellent recyclability, good magnetic separation performance, and satisfying stability. The as-prepared diatomite-based DMT/CoFe₂O₄-p-ATP can be a promising adsorbent for mercury ions.

Preparation of metal organic frameworks modified chitosan composite with high capacity for Hg(II) adsorption

In this study, a novel modified chitosan composite adsorbent (UNCS) was prepared by crosslinking between chitosan and metal organic frameworks (MOFs) material UiO-66-NH₂ using epichlorohydrin as crosslinker. The influence of the prepared conditions was investigated. The structure and morphology of the composite were characterized by FT-IR, XRD, SEM, TGA, BET and zeta potential analysis. Effects of different variables for adsorption of Hg(II) on this adsorbent were explored. The kinetic studies indicated that the adsorption process followed the pseudo-second-order kinetic model and the adsorption equilibrium could be reached within 2 h. The adsorption was mainly controlled by chemical process. Adsorption isothermal studies illustrated that the adsorption fitted Langmuir isotherm model, implying the homogeneous adsorption on the surface of the adsorbent. The adsorbent exhibited high uptake and the maximum capacity from Langmuir model could reach 896.8 mg g^-1 at pH 6. Thermodynamic studies showed the spontaneous nature and exothermic nature of the adsorption process. Additionally, the removal of Hg(II) on UNCS could achieve over 90 %. The adsorption-desorption cycled experiments indicated the appropriate reusability of the adsorbent. Hence, this adsorbent would be promising for the removal of Hg(II) from wastewater.

Synthesis of functional poly(amidoamine) dendrimer decorated apple residue cellulose for efficient removal of aqueous Hg(II)

Water pollution caused by Hg(II) exerts hazardous effect to the environment and public health. The design and fabrication of eco-friendly bioadsorbents for efficient removal of Hg(II) from aqueous solution is a promising strategy. Herein, a series of bioadsorbents were synthesized by the decoration of apple residue cellulose with different generation (G) Schiff base functionalized poly(amidoamine) (PAMAM) dendrimers (SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE). The structures of SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE were characterized and their adsorption performances were determined comprehensively by considering various factors. The maximum adsorption capacity of SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE for Hg(II) are 1.18, 1.73 and 1.88 mmol·g^-1, respectively. The as-prepared bioadsorbents exhibit competitive adsorption capacity as compared with other reported adsorbents. Moreover, they exhibit remarkable adsorption selectivity toward Hg(II) with the coexistence of Ni(II), Cd(II), Mn(II), or Pb(II). The bioadsorbents display satisfactory adsorption performance in real water sample and can be reused with good regeneration property. Adsorption mechanism reveals that the functional groups of OH, -CONH-, CN and NC take part in the adsorption for Hg(II). The work not only opens a pathway to realize the reuse of apple residue, but also provides a promising strategy to construct efficient bioadsorbents for the decontamination of Hg(II) from aqueous solution.

Metal-Organic Framework-Based Materials for Wastewater Treatment: Superior Adsorbent Materials for the Removal of Hazardous Pollutants

In previous years, different pollutants, for example, organic dyes, antibiotics, heavy metals, pharmaceuticals, and agricultural pollutants, have been of note to the water enterprise due to their insufficient reduction during standard water and wastewater processing methods. MOFs have been found to have potential toward wastewater management. This Review focused on the synthesis process (such as traditional, electrochemical, microwave, sonochemical, mechanochemical, and continuous-flow spray-drying method) of MOF materials. Moreover, the properties of the MOF materials have been discussed in detail. Further, MOF materials' applications for wastewater treatment (such as the removal of antibiotics, organic dyes, heavy metal ions, and agricultural waste) have been discussed. Additionally, we have compared the performances of some typical MOFs-based materials with those of other commonly used materials. Finally, the study's current challenges, future prospects, and outlook have been highlighted.

Facile green preparation of single- and two-component modified activated carbon fibers for efficient trace heavy metals removal from drinking water

Trace heavy metals exist in drinking water, having great adverse effects on human health and making it a huge challenge to remove. Herein, novel materials have been prepared by a simple and green method using single- (polydopamine (PDA) or 2,3-dimercaptopropanesulfonic sodium (DMPS)) (PDA-OACF or DMPS-OACF) and two-component (PDA and DMPS) (DMPS-PDA-OACF) functionalized activated carbon fibers pretreated by hydrogen peroxide for the removal of trace heavy metals. The as-prepared DMPS-OACF (7.5,20) under DMPS addition of 7.5 mg and sonication time of 20 min retained large specific surface area, micro-mesoporous structure and rich functional groups and showed better adsorption performance for trace lead and mercury. It also exhibited wide applicable ranges of pH (3.50-10.50) and concentration (50-1136 μg L^-1), rapid adsorption kinetics, and excellently selective removal performance for trace lead. The maximum lead adsorption capacity reached 16.03 mg g^-1 when the effluent lead concentration met World Health Organization (WHO) standard and the adsorbent can be regenerated by EDTA solution. The fitting results of adsorption kinetics and isotherm models revealed that the lead adsorption process was multi-site adsorption on heterogeneous surfaces and chemical adsorption. The excellent adsorption properties for trace heavy metals were attributed that the sulfur/oxygen/nitrogen-containing functional groups boosted diffusion and adsorption by electrostatic attraction and coordination, suggesting that DMPS-OACF (7.5,20) has great application potential in the removal of trace heavy metals.

Removal of Hg2+ in wastewater by grafting nitrogen/sulfur-containing molecule onto Uio-66-NH2: from synthesis to adsorption studies

The remediation of heavy metal deserves to be on the agenda, with the adsorbent design bearing the brunt of it. In this study, the molecule (4, 6-diamino-2-mercaptopyrimidine, DMP) containing thiol (-SH) and amino (-NH₂) functional groups was grafted onto Uio-66-NH₂, and a composite metal-organic framework nanomaterial (Zr(NH₂)-DMP) was synthesized via a facile post-modification scheme. The morphological characteristics and structural features of the modified adsorbent were characterized by XRD, FT-IR, FE-SEM, EDS, BET, and XPS. The characterization results verified that the post-modification scheme was successfully achieved. The adsorption experiments were carried out to investigate the removal performance of the Zr(NH₂)-DMP towards Hg²⁺ under different influencing parameters. The maximum adsorption capacity of 389.4 mg/g was obtained, and the adsorption equilibrium was achieved within 30 min at pH 6 at room temperature. Adsorption thermodynamic study indicated that the adsorption process was exothermic and spontaneous. The Zr(NH₂)-DMP exhibited excellent selectivity for Hg²⁺, and also has the potential to remove Cu²⁺, Fe²⁺, and Zn²⁺ ions. The introduction of Cl^- inhibited the removal of Hg²⁺ due to the formation of mercuric chlorides (removal efficiency reduced from 97.8 to 95.6%). The removal efficiency of up to 86.7% was obtained after four cycles. The Langmuir isotherm and Pseudo-second kinetic were more suitable for fitting the adsorption process of Hg²⁺ by Zr(NH₂)-DMP. The main removal mechanism could be attributed to the chelation between Hg²⁺ (soft acid) and nitrogen/sulfur (soft base) elements. These findings convinced that the successful synthesis of Zr(NH₂)-DMP provides an option for Hg²⁺ removal from wastewater.

Zwitterionic ammonium-sulfonato grafted cellulose for efficient thallium removal and adsorption mechanism study

Thallium (Tl) has posed serious impacts on human being concerning increasingly serious pollution in aqueous environments. However, little information on removal method than conventional heavy metals have been available. In the present work, zwitterionic N-(3-sulfonato-1-propyl)-N,N-dimethylammonium grafted cellulose fibre (DMAE-PS) has been fabricated. The chemical component, thermal stability and surface properties of as-prepared materials are identified by FT-IR, elemental analysis, TGA, XRD, BET and SEM. DMAE-PS is shown to be very efficient for removing Tl(I) from water samples with a loading capacity of 274.7 mg (Tl(I))·g^-1 (DMAE-PS)_, representing one of the best performances among bio-mass derived materials. The adsorption is consistent with the Freundlich model following a pseudo-second order (K₂ = 4.36 × 10^-4 g·mg^-1·min^-1, R² = 0.999) and two-step intra-particle diffusion kinetics. The selectivity towards Tl(I) is also remarkably, 1-2 orders (distribution ratio K_Tl/M = 14.85-289.29) of magnitude larger than competing metals (Zn²⁺, Cr³⁺, Mn²⁺, Cu²⁺ and Cd²⁺). The SEM, XPS and UV-visible spectrum collectively reveal that -SO₃^--Tl(I) ionic interaction is probably the main driving force for specific adsorption, which shows a high stability against pH variation. The fabricated DMAE-PS is a sustainable bio-adsorbent with synthetic availability, high removing capacity and strong selectivity, therefore, potentially feasible in treatment of Tl(I) polluted environmental samples.

Selective mercury adsorption and enrichment enabled by phenylic carboxyl functionalized poly(pyrrole methane)s chelating polymers

Mercury decontamination from water requires highly effective and efficient methods for maintaining public health and environmental protection. Herein, based on the coordination theory between functional groups and metal ions, we proposed phenylic carboxyl group-based poly(pyrrole methane)s (PPDCBAs) as highly efficient mercury removal materials for environmental remediation applications. It was found that PPDCBAs can efficiently adsorb and remove mercury(II) from aqueous solutions by functionalizing the molecular structure with phenylic carboxyl groups. Among the as-prepared PPDCBAs, poly[pyrrole-2, 5-diyl (4-carboxybenzylidane)] (PPD4CBA) with the carboxyl group at the para position can not only adsorb mercury over 1400 mg⋅g^-1 but also achieve a 92.5 % mercury(II) uptake within 100 min by a very low dosage of 0.1 g⋅L^-1. In addition, PPDCBAs exhibited excellent adsorption selectivity for mercury(II) compared with copper(II), cadmium(II), zinc(II) and lead(II). Furthermore, as determined by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and the density functional theory (DFT) calculation, the mercury removal was found to be mainly dependent on the high density of chelating sites, the phenylic carboxyl moieties, which helped us to realize an ultra-trace amount mercury removal (from 10.8 μg⋅L^-1 to 0.6-0.8 μg⋅L^-1) for meeting drinking water standard requirements (1.0 μg⋅L^-1).

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Hydrolytically stable mixed ditopic linker based zirconium metal organic framework as a robust photocatalyst towards Tetracycline Hydrochloride degradation and hydrogen evolution

In the existing eco-crisis, designing and engineering an efficient as well as water stable photocatalyst for energy conversion and pollutant abatement remains crucial. In this regard, a mixed linker type zirconium metal organic framework (Zr-MOF) with terepthalic acid based ditopic linkers were utilized to design a single component photocatalyst through single step solvothermal method to utilize photons from visible light illumination towards hydrogen energy (H2) production and Tetracycline Hydrochloride (TCH) degradation. The one pot synthesized mixed linker based Zr-MOF displays visible light absorption through band gap tuning, superior exciton segregation and oxygen vacancy that cumulatively supports the enhancement in the photocatalytic output with respect to their pristine counterparts. Additionally, the X-ray photoelectron spectroscopy, optical and electrochemical studies strongly reinforces the above claims. The prepared mixed linker Zr-MOF showed superior photocatalytic H2 evolution performance of 247.88 µmol h-1 (apparent conversion efficiency; ACE = 1.9%) that is twice than its pristine Zr-MOFs. Moreover, in TCH degradation, the mixed linker MOF displays an enhanced efficacy of 91.8 % and adopts pseudo-first order type kinetics with a rate constant value of 0.032. Typically, the active species participating for the TCH photo-degradation follows the order of hydroxyl (OH.) < superoxide (O2.-) radicals. Consequently, the mixed linker Zr-MOF could be effectively used as a robust photocatalyst exhibiting boosted TCH degradation and H2 production.

Selective removal of Hg(II) by UiO-66-NH2 modified by 4-quinolinecarboxaldehyde: from experiment to mechanism

In wastewater, heavy metal Hg causes serious harm to ecology, so it needs to be removed. In this paper, a novel MOF adsorbent (UiO-66-QU) was prepared by modifying UiO-66-NH₂ with 4-quinolinecarboxaldehyde, which was used to selectively remove Hg(II) from water. The adsorbent was characterized using Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), zeta potentiometer, and X-ray photoelectron spectroscopy (XPS). In order to investigate the Hg(II) adsorption performance of UiO-66-QU, the effect of time, initial concentration, pH, and temperature were carried out. Langmuir model fitting shows that the maximum adsorption capacity of UiO-66-QU for Hg(II) is 556 mg/g at 298 K. The experimental results show that UiO-66-QU has better Hg(II) adsorption capacity than UiO-66-NH₂. The isotherm is in accordance with pseudo-second-order models. It is indicated that the adsorption process is mainly monolayer chemical adsorption. The thermodynamic parameters also indicate that the adsorption process is spontaneous and endothermic. It has excellent reusability and selectivity. XPS and the zeta potential showed that the adsorption mechanism was the complex reaction of Hg(II) with nitrogenous group. Therefore, the adsorbent has potential application prospects in removal of Hg(II) from wastewater.

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g^-1 , with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.

Selective adsorption of Hg(ii) with diatomite-based mesoporous materials functionalized by pyrrole-thiophene copolymers: condition optimization, application and mechanism

A novel diatomite-based mesoporous material of MCM-41/co-(PPy-Tp) was prepared with MCM-41 as carrier and functionalized with the copolymer of pyrrole and thiophene. The physicochemical characteristics of the as-prepared materials were characterized by various characterization means. The removal behaviour of Hg(ii) was adequately investigated via series of single factor experiments and some vital influence factors were optimized via response surface methodology method. The results exhibit that diatomite-based materials MCM-41/co-(PPy-Tp) has an optimal adsorption capability of 537.15 mg g-1 towards Hg(ii) at pH = 7.1. The removal process of Hg(ii) onto MCM-41/co-(PPy-Tp) is controlled by monolayer chemisorption based on the fitting results of pseudo-second-order kinetic and Langmuir models. In addition, the adsorption of Hg(ii) ions onto MCM-41/co-(PPy-Tp) is mainly completed through forming a stable complex with N or S atoms in MCM-41/co-(PPy-Tp) by electrostatic attraction and chelation. The as-developed MCM-41/co-(PPy-Tp) displays excellent recyclability and stabilization, has obviously selective adsorption for Hg(ii) in the treatment of actual electroplating wastewater. Diatomite-based mesoporous material functionalized by the copolymer of pyrrole and thiophene exhibits promising application prospect.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Removal of methyl orange wastewater by Ugi multicomponent reaction functionalized UiO-66-NS

The efficient and rapid removal of organic dyes from wastewater remains a complex and challenging task. In this study, UiO-66-NH₂ was prepared by solvothermal synthesis, and then, UiO-66-NS was prepared by compounding L-cysteine with UiO-66-NH₂ via the Ugi reaction for the efficient removal of methyl orange. UiO-66-NS was prepared by the addition of 1 mmol L-cysteine and showed good adsorption of methyl orange with 92.00% removal. Pseudo-second-order kinetics and Langmuir isotherms more accurately described the adsorption process of UiO-66-NS on methyl orange, which indicated that the adsorption process was dominated by monolayer adsorption of chemical reactions, and the maximum adsorption amounts of UiO-66-NS on methyl orange were 242.72 mg/g at 298 K. In addition, UiO-66-NS exhibited ultrahigh stability in acidic, neutral, and alkaline media (pH = 3-10), but its adsorption of methyl orange after 5 cycles was only 59.53% of the maximum adsorption amount. The adsorption mechanism is primarily electrostatic adsorption of UiO-66-NS with methyl orange, hydrogen bonding, and π-π interactions. This atomically economical Ugi multicomponent reaction provides new ideas for the preparation of structurally designable adsorbents with excellent performance.