Experimental and theoretical aspects of biochar-supported nanoscale zero-valent iron activating H2O2 for ciprofloxacin removal from aqueous solution

Persulfate activation with biochar supported nanoscale zero- valent iron: Engineering application for effective degradation of NCB in soil

Nitrochlorobenzene (NCB) is very common in pesticide and chemical industries, which has become a major problem in soil environment. However, the remediation of NCB contaminated soil is received finite concern. Using biochar as a substrate for nanoscale-zero valent iron (nZVI/p-BC) to activate peroxodisulfate (PDS), a novel heterogeneous oxidative system had been applied in the current study to remediate NCB contaminants in soil. The degradation efficiencies and kinetics of m-NCB, p-NCB, and o-NCB by various systems were contrasted in soil slurry. Key factors including the dosage of nZVI/p-BC, the molar ratio of nZVI/PDS, initial pH and temperature on degradation of NCB were further examined. The results confirmed that the nZVI/p-BC/PDS displayed the remarkable performance for removing NCB compared with other systems. Higher temperature with nZVI/PDS molar ratio of 2:1 under the acidic condition favored the reduction of NCB. The treatment for NCB with optimal conditions were evaluated for the engineering application. The mechanism of nZVI/p-BC/PDS indicated that electron transfer between p-BC and nZVI was responsible for activation of PDS, generating active species (SO4•-, •OH and 1O2) via both the free and non-free radical pathways. Experimental results revealed prominent availability of nZVI/p-BC/PDS system in remediation of actual contaminated field by NCB.

Preference and regulation mechanism mediated via mobile genetic elements for antibiotic and metal resistomes during composting amended with nano ZVI loaded on biochar

This study assessed the effectiveness of nano zero-valent iron loaded on biochar (BC-nZVI) during swine manure composting. BC-nZVI significantly reduced the abundance of antibiotic resistance genes (ARGs), metal resistance genes (MRGs), and mobile genetic elements (MGEs). BC-nZVI modified the preference of MGEs to carry ARGs and MRGs, and the corrosion products of BC-nZVI could destroy cell structure, hinder electron transfer between cells, and weaken the association between ARGs, MRGs, and host bacteria. Functional genes analysis revealed that BC-nZVI down-regulated the abundance of genes affecting the transmission and metabolism of ARGs and MRGs, including type IV secretion systems, transporter systems, two-component systems, and multidrug efflux pumps. Furthermore, the BC-nZVI decreased genes related to flagella and pili production and cell membrane permeability, thereby hindering the transfer of ARGs, MRGs, and MGEs in the environment. Redundancy analysis demonstrated that changes in the microbial community induced by BC-nZVI were pivotal factors impacting the abundance of ARGs, MRGs, and MGEs. Overall, this study confirmed the efficacy of BC-nZVI in reducing resistance genes during swine manure composting, offering a promising environmental strategy to mitigate the dissemination of these contaminants.

Affecting factors and mechanism of removing antibiotics and antibiotic resistance genes by nano zero-valent iron (nZVI) and modified nZVI: A critical review

Antibiotics and antibiotic resistance genetic pollution have become a global environmental and health concern recently, with frequent detection in various environmental media. Therefore, finding ways to control antibiotics and antibiotic resistance genes (ARGs) is urgently needed. Nano zero-valent iron (nZVI) has shown a positive effect on antibiotics degradation and restraining ARGs, making it a promising solution for controlling antibiotics and ARGs. However, given the current increasingly fragmented research focus and results, a comprehensive review is still lacking. In this work, we first introduce the origin and transmission of antibiotics and ARGs in various environmental media, and then discuss the affecting factors during the degradation of antibiotics and the control of ARGs by nZVI and modified nZVI, including pH, nZVI dose, and oxidant concentration, etc. Then, the mechanisms of antibiotic and ARGs removal promoted by nZVI are also summarized. In general, the mechanism of antibiotic degradation by nZVI mainly includes adsorption and reduction, while promoting the biodegradation of antibiotics by affecting the microbial community. nZVI can also be combined with persulfates to degrade antibiotics through advanced oxidation processes. For the control of ARGs, nZVI not only changes the microbial community structure, but also affects the proliferation of ARGs through affecting the fate of mobile genetic elements (MGEs). Finally, some new ideas on the application of nZVI in the treatment of antibiotic resistance are proposed. This paper provides a reference for research and application in this field.

Enhancement of norfloxacin degradation by citrate in S-nZVI@Ps system: Chelation and FeS layer

The degradation of organic pollution by sulfur-modified nano zero-valent iron(S-nZVI) combined with advanced oxidation systems has been extensively studied. However, the low utilization of nZVI and low reactive oxygen species (ROS) yield in the system have limited its wide application. Herein, a natural organic acid commonly found in citrus fruits, citric acid (CA), was combined with the conventional S-nZVI@Ps system to enhance the degradation of norfloxacin (NOR). The addition of CA increased the NOR removal by about 31% compared with the conventional S-nZVI@Ps system under the same experimental conditions. Among them, the enhanced effect of CA is mainly reflected in its ability to promote the release of Fe2+ and accelerate the cycling of Fe2+ and Fe3+ to further improve the utilization of nZVI and the generation of ROS; it also promotes the dissolution of the active substance (FeS) on the surface of S-nZVI to further improve the degradation rate of NOR. More importantly, the chelate of CA and Fe2+ (CA-Fe2+) had higher reactivity than alone Fe2+. Free radical quenching and electron spin resonance (ESR) experiments indicated that the main ROS for the degradation of NOR in the CA/S-nZVI@Ps system were SO4•- and OH•. CA-bound sulfur-modifying effects on NOR degradation was systematically investigated, and the degradation mechanism of NOR in CA/S-nZVI@Ps system was explored by various techniques. Additionally, the effect of common anions in water matrix on the degradation of NOR in CA/S-nZVI@Ps system and its degradation of various pollutants were also studied. This study provides a new perspective to enhance the degradation of pollutants by S-nZVI combined with advanced oxidation system, which can help to solve the application boundary problem of S-nZVI.

Iron-doped swine bone char as hydrogen peroxide activator for efficient removal of acetaminophen in water

Bone char is a functional material obtained by calcining animal bones and is widely used for environmental remediation. In this work, iron was inserted into porcine bone-derived bone char via ion exchange to synthesize iron-doped bone char (Fe-BC) for efficient catalysis of hydrogen peroxide. This is the first time that Fe-BC has been used as a catalyst for the activation of H2O2. The effectiveness of the Fe-BC catalyst was influenced by the annealing temperature and the amount of iron doping. The results showed that the activation of H2O2 by the Fe-BC catalyst with the best catalytic performance could achieve 97.6% of APAP degradation within 30 min. Insights from electron paramagnetic resonance (EPR), free radical scavenging experiments and linear sweep voltammetry (LSV) proposed a reaction mechanism based on free radicals dominated degradation pathways (OH and O2-). Iron served as the primary active site in Fe-BC, with defect sites and oxygen-containing groups in the catalyst also contributing to the removal of pollutants. The Fe-BC/H2O2 system demonstrated resilience to interference from common anions (Cl-, NO3-, SO42- and HCO3-) in water, but was less effective against humic acid (HA). Based on the detection of intermediates produced during APAP degradation, possible degradation pathways of APAP were proposed and the toxicity of intermediates was evaluated. This work provides fresh insights into the use of heterogeneous Fenton catalysts for the removal of organic pollutants from water.

Removal of bisphenol A in a heterogeneous Fenton system via biochar synthesized using different Fe precursors: Properties, effects, and mechanisms

The reactivity and mechanism of the Fe-doped biochar (FeBC) Fenton reaction are typically influenced by the amount and type of Fe species in materials. This study investigated the effects of different Fe precursors (FeSO4, Fe(NO)3, FeCl2, and FeCl3) used to prepare Fenton catalyst FeBCs (FeSBC, FeNBC, FeC2BC, and FeC3BC) on the physicochemical characteristics, pH resistance, and reactivity for bisphenol A (BPA) removal. In addition to the FeSBC/H2O2 (0.007 min-1) system, FeNBC/H2O2 (1.143 min-1), FeC2BC/H2O2 (0.278 min-1), and FeC3BC/H2O2 (0.556 min-1) completely removed BPA within 20 min under the optimal conditions (FeBCs: 0.1 g/L; H2O2: 1 mM; BPA: 20 mg/L; pH 3). FeBCs/H2O2 systems demonstrated good stability and resistance to inorganic anions and natural organic matter under appropriate initial pH conditions. However, FeC2BC and FeC3BC exhibited better pH applicability than FeNBC. Characterization results indicated that the physicochemical properties of FeBCs were dependent on the Fe precursor, which correlated with the degree of Fe corrosion and the production of distinct reactive oxygen species (ROS). Quenching experiments and electron spin resonance detection results indicated that OH, 1O2, and O2- species were all engaged in BPA removal; the ROS concentrations were significantly influenced by the initial pH and Fe precursor. The results indicate that Fe precursors significantly impact the performance and characteristics of Fe-based biochar materials, which are tailorable to specific applications.

Honeycomb-like biochar framework coupled with Fe3O4/FeS nanoparticles as efficient heterogeneous Fenton catalyst for phenol degradation

Achieving an efficient and stable heterogeneous Fenton reaction over a wide pH range is of great significance for wastewater treatment. Here, a pollen-derived biochar catalyst with a unique honeycomb-like structure, coupled with the dispersion of magnetic Fe3O4/FeS (Fe/S) nanoparticles, was synthesized by simple impregnation precursor, followed by pyrolysis. The prepared Fe/S-biochar catalyst demonstrated outstanding phenol degradation efficiency across a wide pH range, with 98% of which eliminated even under neutral conditions (pH 7.0). The high catalytic activity was due to the multilevel porous structure of pollen-derived biochar provided enough active sites and allowed for better electron transfer, then increases oxidation ability to promote the reaction. Moreover, the acid microenvironment formed by SO42- group from Fe/S composite extended the pH range for Fenton reaction, and S2- facilitated the conversion of Fe3+ to Fe2+, resulting in remarkable degradation efficiency. Further, biochar can effectively promote cycling stability by limiting Fe leaching. This work may provide a general strategy for designing 3D framework biochar-based Fe/S catalysts with excellent performance for heterogeneous Fenton reactions.

Antibiotic resistance gene profiles and evolutions in composting regulated by reactive oxygen species generated via nano ZVI loaded on biochar

In this study, nano zero-valent iron loaded on biochar (BC-nZVI) was analyzed for its effects on antibiotic resistance genes (ARGs) in composting. The results showed that BC-nZVI increased reactive oxygen species (ROS) production, and the peak values of H2O2 and OH were 22.95 % and 55.30 % higher than those of the control group, respectively. After 65 days, the relative abundances of representative ARGs decreased by 56.12 % in the nZVI group (with BC-nZVI added). An analysis of bacterial communities and networks revealed that Actinobacteria, Proteobacteria, and Firmicutes were the main hosts for ARGs, and BC-nZVI weakened the link between ARGs and host bacteria. Distance-based redundancy analysis showed that BC-nZVI altered the microbial community structure through environmental factors and that most ARGs were negatively correlated with ROS, suggesting that ROS significantly affected the relative abundance of ARGs. According to these results, BC-nZVI showed potential for decreasing the relative abundance of ARGs in composting.

A novel magnetic sludge biochar was prepared by making full use of internal iron in sludge combining KMnO4-NaOH modification to enhance the adsorption of Pb (Ⅱ), Cu (Ⅱ) and Cd (Ⅱ)

This study synthesized novel magnetic biochar (PCMN600) by KMnO4-NaOH combined modification using iron-containing pharmaceutical sludge to remove toxic metals from wastewater effectively. Various characterization experiments of engineered biochar showed that the modification process introduced ultrafine MnOx particles on the carbon surface and resulted in higher BET surface area and porosity along with more oxygen-containing surface functional groups. Batch adsorption studies indicated that the maximum adsorption capacities of PCMN600 for Pb2+, Cu2+ and Cd2+ were 181.82 mg/g, 30.03 mg/g and 27.47 mg/g, respectively, at a temperature of 25 °C and pH of 5.0, which were much higher than that of pristine biochar (26.46 mg/g, 6.56 mg/g and 6.40 mg/g). The adsorption datums of three toxic metal ions fitted well to the pseudo-second-order model and Langmuir isotherm, and the sorption mechanisms were identified as electrostatic attraction, ion exchange, surface complexation, cation-π interaction and precipitation. The strong magnetic properties of the engineered biochar endowed the adsorbent with remarkable reusability, and after five cycles of recycling, PCMN600 still retained nearly 80% of its initial adsorption capacities.

The performance and mechanism of iron-mediated chemical oxidation: Advances in hydrogen peroxide, persulfate and percarbonate oxidation

Many studies have successfully built iron-mediated materials to activate or catalyze Fenton-like reactions, with applications in water and wastewater treatment being investigated. However, the developed materials are rarely compared with each other regarding their performance of organic contaminant removal. In this review, the recent advances of Fenton-like processes in homogeneous and heterogeneous ways are summarized, especially the performance and mechanism of activators including ferrous iron, zero valent iron, iron oxides, iron-loaded carbon, zeolite, and metal organic framework materials. Also, this work mainly compares three O-O bond containing oxidants including hydrogen dioxide, persulfate, and percarbonate, which are environmental-friendly oxidants and feasible for in-situ chemical oxidation. The influence of reaction conditions, catalyst properties and benefits are analyzed and compared. In addition, the challenges and strategies of these oxidants in applications and the major mechanisms of the oxidation process have been discussed. This work can help understand the mechanistic insights of variable Fenton-like reactions, the role of emerging iron-based materials, and provide guidance for choosing appropriate technologies when facing real-world water and wastewater applications.

Effect and mechanism of norfloxacin removal by guava leaf extract in the ZVI/H2O2 system

To overcome the bottlenecks of the conventional zero-valent iron Fenton-like (ZVI/H₂O₂) process, such as low reagent utilization, low applicable pH, and iron sludge contamination, guava leaf extract (GLE) was used as a green promoter to enhance ZVI/H₂O₂ process in this study. Compared with the ZVI/H₂O₂ system, the removal rate and k_obs of norfloxacin by the ZVI/H₂O₂/GLE system were increased by 33.76% and 2.19 times, respectively. The experimental investigation of the mechanism showed that the attack of reactive oxygen species was the main pathway for the removal of pollutants, and three types of reactive oxygen species (¹O₂, O₂^-,·OH) generations in the ZVI/H₂O₂/GLE system were effectively promoted by the introduction of GLE. The reactivity improvement was mainly due to the decrease of pH. At the same time, the chelation of iron ions by GLE promoted the Fe(III)/Fe(II) cycle on the catalyst surface was also a minor mechanism to improve the reactivity. This study provides a crucial reference for the practical application of guava leaf to promote the ZVI/H₂O₂ process in environmental pollution control.

Insight into advanced oxidation processes for the degradation of fluoroquinolone antibiotics: Removal, mechanism, and influencing factors

The enrichment and transport of antibiotics in the environments pose many potential hazards to aquatic animals and humans, which has become one of the public health challenges worldwide. As a widely used class of antibiotics, fluoroquinolones (FQs) generally accumulated in the environments as traditional sewage treatment plants cannot completely remove them. Advanced oxidation processes (AOPs) have been shown to be a promising method for the abatement of antibiotic contamination. In this review, influencing factors and relevant mechanisms of FQs removal by various AOPs were summarized. Compared with other AOPs, photocatalytic ozone may be considered as a cost-effective method for degrading FQs. Finally, the benefits and application restrictions of AOPs were discussed, along with proposed research directions to provide new insights into the control of FQs pollutant via AOPs in practical applications.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Efficient Removal of Ciprofloxacin from Contaminated Water via Polystyrene Anion Exchange Resin with Nanoconfined Zero-Valent Iron

Ciprofloxacin (CIP), an important emerging contaminant, has been frequently detected in water, and its efficient removal has become an issue of great concern. In this study, a nanocomposite material nZVI/PA was synthesized by impregnating nanoscale zero-valent iron (nZVI) inside a millimeter-sized porous host (polystyrene-based anion exchange resin (PA)) for CIP removal. The nZVI/PA composite was characterized by field emission scanning electron microscopy coupled with energy-dispersive X-ray, transmission electron microscopy, X-ray diffraction, as well as X-ray photoelectron spectroscopy, and it was confirmed that nZVI was uniformly dispersed in PA with a small particle size. Furthermore, several key factors were investigated including initial solution pH, initial CIP concentration, co-existing ions, organic ligands, and dissolved oxygen. The experimental results indicated that the nZVI/PA composites exhibited a high removal efficiency for CIP under the conditions of initial pH 5.0, and initial CIP concentration 50 mg L^-1 at 25 °C, with the maximum removal rate of CIP reaching 98.5%. Moreover, the nZVI/PA composites exhibited high efficiency even after five cycles. Furthermore, quenching tests and electron spin resonance (ESR) confirmed that CIP degradation was attributed to hydroxyl (·OH) and superoxide radicals (⋅O2-). Finally, the main degradation products of CIP were analyzed, and degradation pathways including the hydroxylation of the quinolone ring, the cleavage of the piperazine ring, and defluorination were proposed. These results are valuable for evaluating the practical application of nZVI/PA composites for the removal of CIP and other fluoroquinolone antibiotics.

Degradation of UV-P mediated by hydroxyl radical, sulfate radical and singlet oxygen in aquatic solution: DFT and experimental studies

2-(2'-hydroxy-5'-methylphenyl) benzotriazole (UV-P) is a type of emerging persistent organic pollutant that is reported harmful to organisms. However, its degradation mechanisms and transformation behaviors in aquatic environments are not yet clear, which are significant for better understanding its environmental fate and potential toxicological impacts. In present work, the degradation mechanisms, kinetics, half-life times and eco-toxicity assessment of UV-P initiated by hydroxyl radical (•OH), sulfate radical (SO₄•^‾), and singlet oxygen (¹O₂) are systematically studied using density functional theory (DFT) and experimental methods. The initiated reaction results show that benzene ring of UV-P is vulnerable to attack by •OH, while benzotriazole is easily attacked by SO₄•^‾. The kinetic calculations indicate that •OH-addition reaction R15 is dominant initial pathway. And the half-life (t_1/2) of UV-P is calculated according to rate constants, t_1/2 decreases rapidly with [ROS] increasing. UV-P exhibits environmental persistence when [•OH] ≤ 10^-17 M. The subsequent degradation mechanisms of hydroxylated UV-P react with •OH and O₂ are also calculated. A novel ring-opening reaction channel is proposed that O₂-addition intermediate combines with hydroperoxyl radical (HO₂•) to cleave aromatic ring. The rate-determining step is intramolecular dehydration reaction with the energy barrier of 32.98 kcal mol^-1 and 41.13 kcal mol^-1 to cleave benzene ring and benzotriazole ring, respectively. The degradation experiments of UV-P are conducted in Co₃O₄ activated potassium peroxymonosulfate (PMS) system, and liquid chromatograph-mass spectrometer (LC-MS) results identified that dihydroxylated species are main intermediates, which is consistent with theoretical calculation results. Furthermore, the eco-toxicity assessment shows that the acute and chronic toxicities of most degradation products are reduced compared with UV-P, however, their toxicity levels still keep at toxic and harmful. The environmental risk of UV-P deserves more attention.

Hydrogen Peroxide Activated by Biochar-Supported Sulfidated Nano Zerovalent Iron for Removal of Sulfamethazine: Response Surface Method Approach

Biochar (BC)-supported sulfide-modified nanoscale zerovalent iron (S-nZVI/BC) was prepared using the liquid-phase reduction method for the application of the removal of sulfamethazine (SMZ) from water. The reaction conditions were optimized by the Box−Behnken response surface method (RSM). A model was constructed based on the influence factors of the removal rate, i.e., the carbon-to-iron ratio (C/Fe), iron-sulfur ratio (Fe/S), pH, and hydrogen peroxide (H2O2) concentration, and the influence of each factor on the removal efficiency was investigated. The optimal removal process parameters were determined based on theoretical and experimental results. The results showed that the removal efficiency was significantly affected by the C/Fe ratio and pH (p < 0.0001) but relatively weakly affected by the Fe/S ratio (p = 0.0973) and H2O2 concentration (p = 0.022). The optimal removal process parameters were as follows: 0.1 mol/L H2O2, a pH of 3.18, a C/Fe ratio of 0.411, and a Fe/S ratio of 59.75. The removal rate of SMZ by S-nZVI/BC was 100% under these conditions. Therefore, it is feasible to use the Box−Behnken RSM to optimize the removal of emerging pollutants in water bodies by S-nZVI/BC.

Fe@Fe2O3-loaded biochar as an efficient heterogeneous Fenton catalyst for organic pollutants removal

With increased demand for various chemical raw materials, sudden pollution incidents are more prone to occur during their transportation and usage, threatening the environment and human health. In this study, discarded tea stalks were recycled into composite materials (FSC-X00: X represents the calcination temperature) by impregnating tea stalks in Fe²⁺ solution combined with subsequent calcination. X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS) patterns verified the existence of Fe⁰ and Fe₂O₃, and Fe₂O₃ was gradually reduced to Fe⁰ when the calcination temperature was raised from 700 °C to 900 °C. FSC-X00 was adopted as a heterogeneous catalyst for activating H₂O₂ to quickly degrade phenol in the water system. The degradation experiments indicated that FSC-600 exhibited superior degradation performance for phenol (20 mg/L) within 5 min and 80% total organic carbon (TOC) removal rate at pH = 3 within 30 min. The effects of the calcination temperature, the pH value and the amount of H₂O₂ on the degradation efficiency were investigated. Competing experiments showed that fulvic acid (FA) and inorganic salts Na⁺ had little effect on the degradation performance. The FSC-600 catalyst can be reused by thermal reduction. In addition, it was found that FSC-600 has a good degradation effect on ciprofloxacin (CIP), norfloxacin (NOR) and enrofloxacin (ENR), indicating that FSC-600 catalysts are a promising candidate for quick degradation of organic pollutants by Fenton reaction. Electron paramagnetic resonance (EPR) spectra analysis indicated that •OH is the dominant reactive oxygen species (ROS) and part ¹O₂ from O₂ also participated in the degradation. This study provides an example of creating catalysts from organic solid waste for use in emergency treatment for phenol.

A Comprehensive Insight on Adsorption of Polyaromatic Hydrocarbons, Chemical Oxygen Demand, Pharmaceuticals, and Chemical Dyes in Wastewaters Using Biowaste Carbonaceous Adsorbents

Recent trends in adsorption of hazardous organic pollutants including Polyaromatic Hydrocarbons (PAHs), Chemical Oxygen Demand (COD), Pharmaceuticals, and Chemical Dyes in wastewater using carbonaceous materials such as activated carbon (AC) and biochar (BC) have been discussed in this paper. Utilization of biomass waste in the preparation of AC and BC has gained a lot of attention recently. This review outlines the techniques used for preparation, modification, characterization, and application of the above-mentioned materials in batch studies. The approaches towards understanding the adsorption mechanisms have also been discussed. It is observed that in the majority of the studies, high removal efficiencies were reported using biowaste adsorbents. Regarding the full potential of adsorption, varying values were obtained that are strongly influenced by the adsorbent preparation technique and adsorption method. In addition, most of the studies were concentrated on the kinetic, isotherm equilibrium, and thermodynamic aspects of adsorption, suggesting the dominant isotherm and kinetic models as Langmuir or Freundlich and pseudo-second-order models. Due to development in biosorbents, adsorption has been found to be increasingly economical. However, application of these adsorbents at commercial scale has not been adequately investigated and needs to be studied. Most of the studies have been conducted on synthetic solutions that do not completely represent the discharged effluents. This also needs attention in future studies.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Co-oxidative removal of arsenite and tetracycline based on a heterogeneous Fenton-like reaction using iron nanoparticles-impregnated biochar

A highly efficient, eco-friendly and relatively low-cost catalyst is necessary to tackle bottlenecks in the treatment of industrial wastewater laden with heavy metals and antibiotic such as livestock farm and biogas liquids. This study investigated co-oxidative removal of arsenite (As(III)) and tetracycline (TC) by iron nanoparticles (Fe NP)-impregnated carbons based on heterogeneous Fenton-like reactions. The composites included Fe NP@biochar (BC), Fe NP@hydrochar (HC), and Fe NP@HC-derived pyrolysis char (HDPC). The functions of N and S atoms and the loading mass of the Fe NP in the Fe NP@BC in heterogeneous Fenton-like reactions were studied. To sustain its cost-effectiveness, the spent Fe NP@BC was regenerated using NaOH. Among the composites, the Fe NP@BC achieved an almost complete removal of As(III) and TC under optimized conditions (1.0 g/L of dose; 10 mM H₂O₂; pH 6; 4 h of reaction; As(III): 50 μM; TC: 50 μM). The co-oxidative removal of As(III) and TC by the Fe NP@ BC was controlled by the synergistic interactions between the Fe NPs and the active N and S sites of the BC for generating reactive oxygen species (ROS). After four consecutive regeneration cycles, about 61 and 95% of As(III) and TC removal were attained. This implies that the spent carbocatalyst still has reasonable catalytic activities for reuse. Overall, this suggests that adding technological values to unused biochar as a carbocatalyst like Fe NP@BC was promising for co-oxidative removal of As(III) and TC from contaminated water.

A review of the new multifunctional nano zero-valent iron composites for wastewater treatment: Emergence, preparation, optimization and mechanism

Nano zero-valent iron (NZVI) with high chemical reactivity and environmental friendliness had recently become one of the most efficient technologies for wastewater restoration. However, the unitary NZVI system had not met practical requirements for wastewater treatments. Expectantly, the development of NZVI would prefer multifunctional NZVI-based composites, which could be prepared and optimized by the combined methods and technologies. Consequently, a systematic and comprehensive summary from the perspective of multifunctional NZVI-composite had been conducted. The results demonstrated that the advantages of various systems were integrated by multifunctional NZVI-composite systems with a more significant performance of pollutant removal than those of the bare NZVI and its composites. Simultaneously, characteristics of the product prepared by the incorporation of numerous methods were superior to those by a simple method, resulting in the increase of the entirety efficiency. By comparison with other preparation methods, the ball milling method with higher production and field application potential was worthy of attention. After combining multiple technologies, the effect of NZVI and its composite systems could be dramatically strengthened. Preparation technology parameters and treatment effect of contaminants could be further optimized using more comprehensive experimental designs and mathematical models. The mechanism of the multifunctional NZVI system for contaminants treatment was primarily focused on adsorption, oxidation, reduction and co-precipitation. Multiple techniques were combined to enhance the dispersion, alleviating passivation, accelerating electron transfer efficiency or mass transfer action for optimizing the effect of NZVI composites.

Resolving the Tribo-catalytic reaction mechanism for biochar regulated Zinc Oxide and its application in protein transformation

The utilization of mechanical energy to control water pollutants under dark conditions is currently a point of study focus. Herein, biochar -zinc oxide (BC-ZnO) composites with various structures were synthesized by co-pyrolysis of cotton and ZnO at different temperature and used for tribo-catalytic reaction. The introduction of BC can improve charge transmission and separation efficiency. Ultraviolet photoelectron spectra (UPS) and density functional theory (DFT) calculation prove the addition of BC can reduce work function of ZnO, and enhance its electron-donating ability. Specially, suitable adsorption amount is the key factor to improve the tribo-catalytic performance. When the pyrolysis temperature is 600 °C, BC-ZnO has the best degradation efficiency, which can degrade 90% Rhodamine B (RhB) in 75 min, while ZnO can degrade only 38%. On this basis, using bovine serum albumin (BSA) as a model, the effect of tribo-catalytic reaction on controlling proteins in water was studied by fluorescence excitation-emission matrix spectroscopy (3D EEM) and infrared microscope, and the transformation of proteins was further analyzed. This study provides a new strategy to improve the tribo-catalytic performance of ZnO, and explores its application prospects of biological wastewater control.

Motivation of reactive oxidation species in peracetic acid by adding nanoscale zero-valent iron to synergic removal of spiramycin under ultraviolet irradiation: Mechanism and N-nitrosodimethylamine formation potential assessment

In this study, nanoscale zero-valent iron (nZVI) was added to motivate the functions of all the reactive oxidation species in peracetic acid (PAA) mixture under ultraviolet (UV) irradiation, and to enhance the removal of spiramycin, which is a typical precursor of N-nitrosodimethylamine (NDMA). Spiramycin (≤ 10 mg/L) could be completely removed within 20 min under the conditions of an initial pH of 4.0, a nZVI dose of 0.02 g/L and a PAA dose of 3.0 mg/L; additionally, 95.8% and 78.8% of PAA and H₂O₂ were consumed during the process. Electron paramagnetic resonance analysis and quenching experiments confirmed that 52.4% and 44.8% of spiramycin removal was contributed by hydroxyl radical (•OH) and carbon-centered radicals (R-C•), respectively; and Fe²⁺ released from nZVI played a critical role in radicals generation. Four degradation pathways of spiramycin were proposed and verified by the density of functional theory analysis. 65.2% of the NDMA formation potential (FP) was reduced after the reaction, and its residual was mainly contributed by the undegraded intermediate of dimethylamine. The results of multiple characterizations and continuous degradation experiments indicated that nZVI was stable in the system as the removal of spiramycin was hardly influenced even if reused three times. The nZVI/UV/PAA process is a promising advanced oxidation technology not only for the removal of refractory NDMA precursors (such as spiramycin) but also for significantly lowering the NDMA FP.

Encapsulation of iron nanoparticles with magnesium hydroxide shell for remarkable removal of ciprofloxacin from contaminated water

The rapid evolution of antimicrobial resistant genes (AMRs) in water resources is well correlated to the persistent occurrence of ciprofloxacin in water. For the first time, encapsulated nanoscale zerovalent iron (nZVI) with a shell of magnesium hydroxide (Mg/Fe⁰) was used to adsorb ciprofloxacin from water. Optimization of the removal conditions exhibited that 5% was the optimum mass ratio between magnesium hydroxide and nZVI [Mg(OH)₂/nZVI)] as more than 96% of 100 mg L^-1 of ciprofloxacin was removed. In addition, 0.5 g L^-1 of Mg/Fe⁰ showed an extraordinary performance in removing ciprofloxacin over a wide range of pH (3-11) with removal efficiencies exceeded 90%. Kinetic analysis displayed that the kinetic data was well described by both Pseudo first-order and second-order models. Also, the equilibrium data was well fitted by Freundlich isotherm model. In addition, thermodynamic analysis evidenced that the removal of ciprofloxacin by Mg/Fe⁰ was exothermic, and spontaneous. The experiments also revealed that physisorption and chemisorption were the responsible mechanisms for ciprofloxacin removal. The proposed treatment system remediated 10 litters of 100 mg L^-1 of ciprofloxacin solution with 100% overall removal efficiency. This treatment system could be a promising and practical solution to decrease ciprofloxacin concentration in different water bodies.

Preparation and application of Fe/biochar (Fe-BC) catalysts in wastewater treatment: A review

The removal of organic pollutants from water environments is a challenging problem. Fe-based BC (Fe-BC) composites are promising catalysts for generating reactive oxygen species (ROS) for environmental remediation considering their low costs and excellent physicochemical surface characteristics. The synthesis methods, properties, applications, and the mechanism of Fe-BC for removing pollutants are reviewed. Various methods have been used to prepare Fe-BC composites, and the synthetic methods and conditions used affect the properties of the Fe-BC material, thereby influencing its pollutant removal performance. The mechanisms of pollutant removal by Fe-BC are intricate and include adsorption, degradation and reduction. Fe loading on BC could improve the performance of BC by affecting its surface area, surface functional groups and electron transfer rate. Moreover, research gaps and uncertainties that exist in the use of Fe-BC were identified. Finally, the problems that need to be solved to make Fe-BC suitable for future applications are described.

Carbon-based adsorbents for fluoroquinolone removal from water and wastewater: A critical review

This review summarizes the adsorptive removal of Fluoroquinolones (FQ) from water and wastewater. The influence of different physicochemical parameters on the adsorptive removal of FQ-based compounds is detailed. Further, the mechanisms involved in the adsorption of FQ-based antibiotics on various adsorbents are succinctly described. As the first of its kind, this paper emphasizes the performance of each adsorbent for FQ-type antibiotic removal based on partition coefficients of the adsorbents that is a more sensitive parameter than adsorption capacity for comparing the performances of adsorbents under various adsorbate concentrations and heterogeneous environmental conditions. It was found that π-π electron donor-acceptor interactions, electrostatic interactions, and pore-filling were the most prominent mechanisms for FQ adsorption by carbon and clay-based adsorbents. Among all the categories of adsorbents reviewed, graphene showed the highest performance for the removal of FQ antibiotics from water and wastewater. Based on the current state of knowledge, this review fills the gap through methodolically understanding the mechanism for further improvement of FQ antibiotics adsorption performance from water and wastewater.

Potassium ferrite nanoparticles on DAP to formulate slow release fertilizer with auxiliary nutrients

Low use efficiency of nitrogen (N) and phosphorus (P) is major challenge of modern agriculture. Coating of conventional fertilizers with nanomaterials is a promising technique for improved nutrient use efficiency. In current study, nanoparticles (NPs) of potassium ferrite (KFeO₂ NPs) were coated on di-ammonium phosphate (DAP) fertilizer with three rates (2, 5, 10%) of KFeO₂ NPs and were evaluated for release of N, P, K and Fe supplementation in clay loam and loam soil up to 60 days. The NPs were characterized for crystal assemblage, bond formation, morphology and configuration using the x-ray diffraction (XRD), scanning electron microscope (SEM) and Fourier transform-infra red spectroscopy (FT-IR). The results showed that size of NPs ranged between 7 and 18 nm. The controlled release of P in 10% KFeO₂ nano-coated DAP was observed throughout the incubation period. The P release kept on increasing from day-1 (14.5 µg g^-1) to day-60 (178.6 µg g^-1) in coated DAP (10%) in loam soil. The maximum release of 50.4 µg g^-1 NH₄⁺¹-N in coated DAP (10%) was observed after 30 days of incubation. The release of NO₃^-1-N was consistent up to 45 and 60 days in clay loam and loam soil, respectively. The average release of potassium and iron in 60 days was 19.7 µg g^-1 and 7.3 µg g^-1 higher in 10% coated DAP than traditional DAP in clay loam soil. It was concluded that KFeO₂ nano-coated DAP supplied P and mineral N for longer period of time in both soils, and some higher coating levels should be tested in future.

Preparation of magnetic biochar and its application in catalytic degradation of organic pollutants: A review

In recent years, magnetic biochar (MBC) has been greatly concerned because of its magnetic separation characteristics, and has been successfully used as a catalyst in the catalytic degradation of organic pollutants. However, there is currently a lack of a more systematic summary of MBC preparation methods, and no detailed overview of the catalytic mechanism of MBC catalysts for the degradation of organic pollutants. Therefore, we carry out this work to fill the above gaps. At first, we summarize the raw materials, preparation methods, and types of MBC in detail, and emphasize the MBC prepared by iron-containing sludge. Then, the catalytic mechanisms of MBC in peroxydisulfate, peroxymonosulfate, Fenton-like, photocatalysis, and NaBH₄ systems are carefully summarized, highlighting the contribution of various parts of MBC in catalysis. The degradation efficiency of organic pollutants in the above systems is evaluated. Finally, the stability and reusability of MBC catalysts are evaluated. In conclusion, this review contributes a meager force to the future development of MBC.

Responses of ammonia-oxidizing microorganisms to biochar and compost amendments of heavy metals-polluted soil

Heavy metal pollution affects soil ecological function. Biochar and compost can effectively remediate heavy metals and increase soil nutrients. The effects and mechanisms of biochar and compost amendments on soil nitrogen cycle function in heavy-metal contaminated soils are not fully understood. This study examined how biochar, compost, and their integrated use affected ammonia-oxidizing microorganisms in heavy metal polluted soil. Quantitative PCR was used to determine the abundance of ammonia-oxidizing archaea (AOA) and bacteria (AOB). Ammonia monooxygenase (AMO) activity was evaluated by the enzyme-linked immunosorbent assay. Results showed that compost rather than biochar improved nitrogen conversion in soil. Biochar, compost, or their integrated application significantly reduced the effective Zn and Cd speciation. Adding compost obviously increased As and Cu effective speciation, bacterial 16S rRNA abundance, and AMO activity. AOB, stimulated by compost addition, was significantly more abundant than AOA throughout remediation. Correlation analysis showed that AOB abundance positively correlated with NO₃^--N (r = 0.830, P < 0.01), and that AMO activity had significant correlation with EC (r = -0.908, P < 0.01) and water-soluble carbon (r = -0.868, P < 0.01). Those seem to be the most vital factors affecting AOB community and their function in heavy metal-polluted soil remediated by biochar and compost.

Synergistic effect of dual sites on bimetal-organic frameworks for highly efficient peroxide activation

Active site engineering is of significant importance for developing high activity metal-organic frameworks (MOFs) for catalytic applications. Herein, we develop a one-pot strategy to construct bimetal organic frameworks with Fe-Co dual sites for Fenton-like catalysis. Density functional theory (DFT) demonstrated that the introducing Co heteroatoms into MIL-101(Fe) (MIL represents Matérial Institute Lavoisier) was favorable for the formation of electron-deficient centers around benzene rings and electron-rich centers around Fe/Co. This synergistic effect could effectively decrease the energy barrier of H₂O₂ activation. Due to the facilitated charge transfer in the coordinated structures, MIL-101(Fe,Co) with engineered dual sites exhibited exceptionally high efficiency for the degradation of ciprofloxacin (CIP). The reaction rate of MIL-101(Fe,Co)/H₂O₂ system was 0.12 min^-1, which was nearly 7.5 times higher than that of pristine MIL-101(Fe). The reaction mechanism of heterogeneous Fenton-like catalysis was fundamentally investigated by series of in-situ techniques, such as DRIFTS and Raman. ·OH radicals generated by H₂O₂ activation endowed the inspiring ability of MIL-101(Fe,Co) for water decontamination. This work offers a facile principle of exploring MOFs-based Fenton-like catalysts with a wide working pH range for environmental applications.

A review of recent advancements in utilization of biomass and industrial wastes into engineered biochar

For past few years, biochar has gained a great deal of attention for its versatile utility in agricultural and environmental applications. The diverse functionality and environmental-friendly nature of biochar have motivated many researchers to delve into biochar researches and spurred rapid expansion of literature in recent years. Biochar can be produced from virtually all the biomass, but the properties of biochar are highly dependent upon the types of feedstock biomass and preparation methods. The overall performances of as-prepared biochar in treating soil and water contaminants is generally inferior to activated carbon due to its lower surface area and limited functionalities. This limitation has led to many follow-up studies that focused on improving material characteristics by imparting desired functionality. Such efforts have greatly advanced knowledge to produce better-performing engineered biochar with enhanced capability and versatility. To this end, this review was prepared to compile recent advancements in fabrication and application of engineered biochar, especially with respect to the influences of biomass feedstock on the properties of biochar and the utilization of industrial wastes in fabrication of engineered biochar.

Experimental and theoretical study of kinetic and mechanism of hydroxyl radical-mediated degradation of sulfamethazine

Hydroxyl radical (^•OH)-based advanced oxidation technologies (AOTs) is an effective and clean way to remove sulfonamide antibiotics in water at ambient temperature and pressure. In this study, we systematically investigated the degradation kinetics of sulfamethazine (SMT) by ^•OH with a combination of experimental and theoretical approaches. The second-order rate constant (k) of SMT with ^•OH was experimentally determined to be 5.27 ± 0.06 × 10⁹ M^-1 s^-1 at pH 4.5. We also calculated the thermodynamic and kinetic behaviors for the reactions by density functional theory (DFT) using the B3LYP/6-31G*. The results revealed that ^•OH addition pathways at the methylene (C4) site on the pyridine ring and the ortho sites (C12 and C14) of the amino group on the benzene ring dominate the reaction, especially C14 site on the benzene ring accounted for 43.95% of SMT degradation kinetics. The theoretical k value which was calculated by conventional transition state theory is 3.96 × 10⁹ M^-1 s^-1, indicating that experimental observation (5.27 ± 0.06 × 10⁹) is correct. These results could further help AOTs design in treating sulfonamide during wastewater treatment processes.

P-nitrophenol degradation by pine-wood derived biochar: The role of redox-active moieties and pore structures

Biochar can both adsorb and degrade p-nitrophenol (PNP); however, the PNP degradation mechanism has not been well investigated. We prepared two biochars at pyrolysis temperatures of 500 °C (B500) and 700 °C (B700). Although B500 showed much stronger free radical signals (which are associated with organic degradation, according to previous studies), the apparent PNP degradation was approximately 3 times higher in the B700 system. The degradation increased significantly after the biochars were washed with water. According to a quantitative analysis of the sorption and degradation and two-compartment first-order kinetics modeling of the apparent removal kinetics, sorption occurred mainly in the initial period, whereas degradation continued throughout the removal process. The PNP degradation rate constant depended mainly on the external surface area at a relatively low concentration (200 mg/L) and was controlled by the microporous surface area at a relatively high concentration (800 mg/L). In addition, the apparent degradation did not depend on the biochar particle size. Therefore, PNP degradation may be related to the three-dimensional structure of the biochar in addition to the exposed external surface. The well-developed pore structure, more accessible surface, and larger electron exchange capacity of B700 may promote electron transfer between the biochar and PNP, and thus accelerate PNP degradation. This study demonstrates that various properties of the biochar may contribute to PNP degradation.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Singlet oxygen mediated the selective removal of oxytetracycline in C/Fe3C/Fe0 system as compared to chloramphenicol

Reactive oxygen species (ROS) production for Fe⁰ is limited because of the formed iron corrosion products. In this study, C/Fe₃C/Fe⁰ composite which produces enhanced ROS has been specifically designed and fabricated to remove typical antibiotics (i.e., oxytetracycline (OTC) and chloramphenicol (CAP)) as a heterogeneous Fenton-like catalyst. The C/Fe₃C/Fe⁰ composite demonstrated excellent performance for both OTC and CAP removal as compared with Fe⁰ and biochar. Furthermore, X-ray photoelectron spectrometry, Fourier transform infrared spectrometry, high performance liquid chromatography-mass spectra and electron spin resonance analyses were conducted to elucidate the adsorption and degradation mechanisms. The adsorption of OTC and CAP was mainly dominated by H bonds and the electron-acceptor-acceptor on the surface of the C/Fe₃C/Fe⁰ composite, respectively. In particular, OH simultaneously induced the degradation of OTC and CAP, while ¹O₂ presented the selective oxidation to OTC. More specifically, the degradation of OTC over C/Fe₃C/Fe⁰ was stronger and faster than that of CAP, leading to 65.84% and 16.84% of removal efficiency for OTC and CAP, respectively. Furthermore, C/Fe₃C/Fe⁰ exhibited superior reusability and stability after regeneration, but regenerated Fe⁰ almost lost its reactivity. Therefore, the efficiency in situ generation of ¹O₂ using C/Fe₃C/Fe⁰ would shed new light on the selective oxidation of aqueous organic compounds.

Coupled use of Fe-impregnated biochar and urea-hydrogen peroxide to simultaneously reduce soil-air emissions of fumigant and improve crop growth

Reducing the emissions of soil fumigants such as 1,3-dichloropropene (1,3-D) is essential to protecting air quality. Although biochar is useful in reducing such emissions, biochar-adsorbed fumigants may desorb and cause secondary air pollution. This study investigated the degradation of 1,3-D on iron (Fe)-impregnated biochar (FBC) amended with urea-hydrogen peroxide (UHP). The results indicated the degradation rate of trans-1,3-D on FBC-UHP was 54-fold higher than that on pristine biochar (PBC). Electron paramagnetic resonance (EPR) combined with other characterization methods revealed that the presence of semiquinone-type radicals in FBC effectively accelerated the Fe(III)/Fe(II) cycleto maintain enough Fe(IIII) for UHP activation and ·OH generation. ·OH, rather than ·O₂^-, was the dominant active oxidant. Soil column tests showed that application of FBC to the soil surface reduced cumulative 1,3-D emissions from 34.80 % (bare soil) to 0.81%. After the column experiment, the mixing of the FBC with UHP resulted in the residual cis-isomers decreasing from 32.5% to 10.5%. Greenhouse bioassays showed that mixing post-1,3-D degradation FBC-UHP with soil significantly promoted lettuce growth relative to PBC. The findings of this study provide a new approach for biochar application, especially for the emission reduction of hazardous volatile organic compounds from soil.

Simultaneous adsorption and oxidation of antimonite onto nano zero-valent iron sludge-based biochar: Indispensable role of reactive oxygen species and redox-active moieties

The nano zero-valent iron sludge-based biochar (nZVI-SBC) was prepared in this study to eliminate Sb(III) from aqueous solutions, which was characterized by BET, SEM, XRD, TEM, FTIR, XPS. Our results proved that the incorporated nZVI on SBC matrix could significantly enhance eliminating Sb(III), and the max-adsorption capacity (160.40 mg g^-1) can be achieved at pH = 4.8 ± 0.2 and temperature of 298 K. The effect of co-existing anions and natural organic matters on the Sb(III) adsorption efficiencies were systematically investigated. The surface complexation is the possible adsorption mechanisms by FTIR and XPS. Furthermore, mechanistic investigation revealed that •OH and hydroquinone radical (H-SQ•^-) could be the primary oxidants for the transformation of Sb(III) under oxic conditions, while 9,10-phenanthrene quinone radical (P-SQ•^-) were responsible under anoxic conditions. Thus, the enhanced elimination of Sb(III) from aqueous solution was ascribed to the combined adsorption and oxidation. The potential engineering application of nZVI-SBC can be proved through three actual water matrix experiments, including lake water, river water and acid mine drainage. Our present findings proved that nZVI-SBC could be a potential adsorbent, given the excellent performance in the adsorption processes, as well as the toxicity alleviating ability and economic advantages, especially under sub-surface water.

Mechanistic insights into the enhanced removal of roxsarsone and its metabolites by a sludge-based, biochar supported zerovalent iron nanocomposite: Adsorption and redox transformation

Roxarsone is a phenyl-substituted arsonic acid comprising both arsenate and benzene rings. Few adsorbents are designed for the effective capture of both the organic and inorganic moieties of ROX molecules. Herein, nano zerovalent iron (nZVI) particles were incorporated on the surface of sludge-based biochar (SBC) to fabricate a dual-affinity sorbent that attracts both the arsenate and benzene rings of ROX. The incorporation of nZVI particles significantly increased the binding affinity and sorption capacity for ROX molecules compared to pristine SBC and pure nZVI. The enhanced elimination of ROX molecules was ascribed to synergetic adsorption and degradation reactions, through π-π* electron donor/acceptor interactions, H-bonding, and As-O-Fe coordination. Among these, the predominate adsorption force was As-O-Fe coordination. During the sorption process, some ROX molecules were decomposed into inorganic arsenic and organic metabolites by the reactive oxygen species (ROS) generated during the early stages of the reaction. The degradation pathways of ROX were proposed according to the oxidation intermediates. This work provides a theoretical and experimental basis for the design of adsorbents according to the structure of the target pollutant.

Theoretical insight into the degradation of p-nitrophenol by OH radicals synergized with other active oxidants in aqueous solution

The degradation of p-nitrophenol (p-NP) based on OH radicals (HO^∙), HO₂ radicals (HO₂^∙) and O₂ in aqueous solution was investigated using theoretical computational methods. The complete degradation mechanisms of reaction between p-NP and HO^∙ were explored by density functional theory (DFT) methods. The 4-nitrophenoxy radicals and 1,2-dihydroxy-4-nitrocylohexadienyl radicals are confirmed to be major intermediates of the HO^∙-initiated reactions in aqueous phase, which consistent with experimental results. The chemical structures of some products (2,4-dihydroxycyclohexa-2,4-dien-1-one and 4-nitrocyclohexa-3,5-diene-1,2-dione) which were not identified in the experiment are determined. New favorable formation channels for some intermediates were found. The primary reactions initiated by HO^∙ or HO₂^∙ with p-NP reveals that HO^∙-initiated degradation is the dominant reaction. HO₂^∙ and O₂ can enhance the degradation extent of p-NP in further reactions. Rate constants of the elementary reactions and overall rate constants were calculated. In addition, the HO^∙-initiated primary reactions in a water box of 500 water molecules were studied using Monte Carlo simulation. All the OH-addition reactions are barrierless and highly feasible. The observed dynamic reaction process is similar to the DFT calculation prediction. Furthermore, the eco-toxicity evaluation shows that important products are harmless or harmful to aquatic organisms, and are much less toxic than p-NP.

Animal carcass- and wood-derived biochars improved nutrient bioavailability, enzyme activity, and plant growth in metal-phthalic acid ester co-contaminated soils: A trial for reclamation and improvement of degraded soils

Reclamation of degraded soils such as those with low organic carbon content and soils co-contaminated with toxic elements and phthalic acid esters (PAEs) is of great concern. Little is known about the efficiency of plant- and animal-derived biochars for improving plant growth and physicochemical and biological properties of co-contaminated soils, particularly under low content of organic matter. Hence, a pot trial was carried out by growing pak choi (Brassica chinensis L.) to assess the influence of different doses (0, 0.5, 1, 2, and 4%) of animal (pig carcass) and wood (Platanus orientalis) derived biochars on soil properties, nutrient availabilities, plant growth, and soil enzyme activities in two soils containing low (LOC) and high (HOC) organic carbon contents and co-contaminated with di-(2-ethylhexyl) phthalic acid (DEHP) and cadmium (Cd). Biochar applications improved pH, salinity, carbon content, and cation exchange capacity of both soils. Addition of biochars significantly increased the bioavailability and uptake of phosphorus and potassium in the plants in both soils with greater effects from pig biochar than wood biochar. Biochar additions also significantly enhanced urease, sucrase, and catalase activities, but suppressed acid phosphatase activity in both soils. The impact of pig biochar was stronger on urease and acid phosphatase, while the wood biochar was more effective with sucrase and catalase activities. The biomass yield of pak choi was significantly increased after biochar addition to both soils, especially in 2% pig biochar treatment in the LOC soil. The positive response of soil enzymes activities and plant growth for biochar addition to the Cd and DEHP co-contaminated soils indicate that both biochars, particularly the pig biochar can mitigate the risk of these pollutants and prove to be eco-friendly and low-cost amendments for reclaiming these degraded soils.