Gasification biochar from biowaste (food waste and wood waste) for effective CO2 adsorption

Redox-mediated changes in the release dynamics of lead (Pb) and bacterial community composition in a biochar amended soil contaminated with metal halide perovskite solar panel waste

This study explored the redox-mediated changes in a lead (Pb) contaminated soil (900 mg/kg) due to the addition of solar cell powder (SC) and investigated the impact of biochar derived from soft wood pellet (SWP) and oil seed rape straw (OSR) (5% w/w) on Pb immobilization using an automated biogeochemical microcosm system. The redox potential (Eh) of the untreated (control; SC) and biochar treated soils (SC + SWP and SC + OSR) ranged from -151 mV to +493 mV. In SC, the dissolved Pb concentrations were higher under oxic (up to 2.29 mg L-1) conditions than reducing (0.13 mg L-1) conditions. The addition of SWP and OSR to soil immobilized Pb, decreased dissolved concentration, which could be possibly due to the increase of pH, co-precipitation of Pb with FeMn (hydro)oxides and pyromorphite, and complexation with biochar surface functional groups. The ability and efficiency of OSR for Pb immobilization were higher than SWP, owing to the higher pH and density of surface functional groups of OSR than SWP. Biochar enhanced the relative abundance of Proteobacteria irrespective of Eh changes, while the relative abundance of Bacteroidota increased under oxidizing conditions. Overall, we found that both OSR and SWP immobilized Pb in solar panel waste contaminated soil under both oxidizing and reducing redox conditions which may mitigate the potential risk of Pb contamination.

Sorption of Soil Carbon Dioxide by Biochar and Engineered Porous Carbons

CO2 is 45 to 50 times more concentrated in soil than in air, resulting in global diffusive fluxes that outpace fossil fuel combustion by an order of magnitude. Despite the scale of soil CO2 emissions, soil-based climate change mitigation strategies are underdeveloped. Existing approaches, such as enhanced weathering and sustainable land management, show promise but continue to face deployment barriers. We introduce an alternative approach: the use of solid adsorbents to directly capture CO2 in soils. Biomass-derived adsorbents could exploit favorable soil CO2 adsorption thermodynamics while also sequestering solid carbon. Despite this potential, previous study of porous carbon CO2 adsorption is mostly limited to single-component measurements and conditions irrelevant to soil. Here, we probe sorption under simplified soil conditions (0.2 to 3% CO2 in balance air at ambient temperature and pressure) and provide physical and chemical characterization data to correlate material properties to sorption performance. We show that minimally engineered pyrogenic carbons exhibit CO2 sorption capacities comparable to or greater than those of advanced sorbent materials. Compared to textural features, sorbent carbon bond morphology substantially influences low-pressure CO2 adsorption. Our findings enhance understanding of gas adsorption on porous carbons and inform the development of effective soil-based climate change mitigation approaches.

Investigating the effectiveness of rice husk-derived low-cost activated carbon in removing environmental pollutants: a study of its characterization

The chemically activated biochar was produced through the pyrolysis of rice husk. Thermal gravimetric and elemental analysis were conducted to characterize the raw rice husk. The activated biochar product underwent evaluation through SEM, BET and, FT-IR analysis. This cost-effective activated carbon was utilized as an adsorbent for the elimination of environmental pollutants. At a temperature of 25 °C, the activated biochar product exhibited an impressive maximum CO2 adsorption capacity of 152 mg/g. This exceptional performance can be attributed to its notable surface area and porosity, measuring at 2,298 m2/g and 0.812 cm3/g, respectively. This product was also utilized to remove methyl red (MR) dye from an aqueous solution. The optimal parameters for the removal of MR were determined as follows: a pH of 6.0, a temperature of 25 °C, an initial MR concentration of 50 mg/L, and an adsorbent dosage of 0.4 g/L. At a duration of 140 min, the system attained its maximum equilibrium adsorption capacity, reaching a value of 62.06 mg/g. Furthermore, the calculated maximum MR removal efficiency stood at an impressive 99.31%. The thermodynamic studies demonstrated that the MR removal process was spontaneous, exothermic, and increased randomness. Kinetic studies suggested that the pseudo-second-order model can fit well.

Acid treatment for enhancing Hg0 removal efficiency of chlorine-loaded biochar: mechanism and kinetic analysis

Adsorbents modified solely with chlorine have limited effectiveness in removing mercury at high temperatures. This study aims to investigate the influence of various acid (HNO3, H2SO4, and H2O2) loadings on the removal efficiency of mercury from NH4Cl-modified adsorbents. The objective is to develop rice straw carbon adsorbents that are both more efficient and cost-effective. The experiments were conducted on a fixed bed experimental platform, with SEM and BET to observe the physical property changes of the modified char samples. XPS analysis was employed to analyze the effects of oxygen, chlorine, and sulfur functional groups. Additionally, a kinetic model was used to investigate the interaction mechanism between the adsorbent and mercury. The findings demonstrate that co-modification surpasses the use of NH4Cl alone, with the combination of NH4Cl and HNO3 yielding the best results. Co-modification enhances the development of a more refined and compact pore structure on the char surface, promoting the physical adsorption of mercury. Moreover, an increased presence of chlorine and oxygen functional groups is observed on the char surface, particularly in the NH4Cl and HNO3 co-modified samples, further enhancing the chemical adsorption capacity of the char. The results from the kinetic analysis support this conclusion. Furthermore, the adsorption process of Hg0 relies on both external mass transfer and chemical adsorption, with the chemical adsorption process playing a more significant role as the controlling factor.

A review of sustainable utilization and prospect of coal gasification slag

Currently, the storage of coal gasification slag (CGS) is continuously increasing, as the coal gasification technology develops, posing significant environmental hazards. Due to its volcanic ash characteristics and rich residual carbon, CGS has great potential for resource utilization, which has attracted the attentions of many scholars. This paper firstly introduces the compositions and properties of CGS. Then, it reviews the existing utilization methods of CGS, including Preparation of building materials, carbon-ash separation technology, ecological restoration, and cyclic blending. The advantages and disadvantages of various methods are compared. Subsequently, some high-value utilization methods of coal gasification slag are introduced, such as the preparation of high-performance activated carbon and zeolite, of which the feasibility and advantages are evaluated. Finally, some suggestions are put forward for future developing technologies. This paper aims to provide some references and inspiration for the utilization and environmental protection of CGS.

Carbonation of steel slag at low CO2 concentrations: Novel biochar cold-bonded steel slag artificial aggregates

Carbonation technology resolves the volume expansion of steel slag by combining CO2 with f-CaO, but the previous stringent carbonation conditions (99%vol) significantly limit the application prospect of steel slag. To achieve the carbonation of steel slag at lower CO2 concentrations, a novel cold-bonded artificial aggregates (CASSAs) based on steel slag and biochar is produced in this paper. The carbon capture capacities of CASSAs with different biochar contents (5 wt%, 10 wt%, and 15 wt%) are investigated in a low-CO2 concentration environment (10.79 % vol) and natural environment using the porosity and CO2 adsorption capacity of biochar. The changes in the performance of CASSAs before and after carbonation are investigated at different curing ages (7 d and 28 d). The results reveal that biochar increases the pores of the CASSAs. At 7 d, B15 achieves complete carbonation at low concentrations and can uptake 6.5 wt% of CO2. CO2 adsorption capacity by biochar in the natural environment facilitates the diffusion of CO2 in CASSAs. Regarding mechanical properties, the addition of biochar makes B15 at 7 d half as strong as B0, but B15 exhibits long-term strength development. B15 at 7 d has a strength of 8.49 MPa after carbonation, which is almost the same as B0. In addition, B15 achieves a net CO2 emission of -39.9 kg/ton. This study combines biochar with CASSAs to provide a potential method to carbonate steel slag at low CO2 concentrations. A new methodology was also used to quantitatively assess the ability of biochar CASSAs to solidify CO2 under low concentration conditions and natural environments from a macroscopic perspective. Biochar CASSAs have great potential to realize resource utilization and carbon capture from steel slag.

Biomass waste as an alternative source of carbon and silicon-based absorbents for CO2 capturing application

The production of low-cost solid adsorbents for carbon dioxide (CO2) capture has gained massive consideration. Biomass wastes are preferred as precursors for synthesis of CO2 solid adsorbents, due to their high CO2 adsorption efficiency, and ease of scalable low-cost production. This review particularly focuses on waste biomass-derived adsorbents with their CO2 adsorption performances. Specifically, studies related to carbon (biochar and activated carbon) and silicon (silicates and geopolymers)-based adsorbents were summarized. The impact of experimental parameters including nature of biomass, synthesis route, carbonization temperature and type of activation methods on the CO2 adsorption capacities of biomass-derived pure carbon and silicon-based adsorbents were evaluated. The development of various enhancement strategies on biomass-derived adsorbents for CO2 capture and their responsible factors that impact adsorbent's CO2 capture proficiency were also reviewed. The possible CO2 adsorption mechanisms on the adsorbent's surface were highlighted. The challenges and research gaps identified in this research area have also been emphasized, which will help as further research prospects.

Emerging applications of biochar: A review on techno-environmental-economic aspects

Biomass fast pyrolysis produces bio-oil and biochar achieving circular economy. This review explored the emerging applications of biochar. Biochar possesses the unique properties for removing emerging contaminants and for mine remediation, owing to its negative charge surface, high specific surface area, large pore size distribution and surface functional groups. Additionally, biochar could adsorb impurities such as CO2, moisture, and H2S to upgrade the biogas. Customizing pyrolysis treatments, optimizing the feedstock and pyrolysis operating conditions enhance biochar production and improve its surface properties for the emerging applications. Life cycle assessment and techno-economic assessment indicated the benefits of replacing conventional activated carbon with biochar.

Converting coastal silt into subgrade soil with biochar as reinforcing agent, CO2 adsorbent, and carbon sequestrating material

Large amounts of coastal silt produced annually is urgent to be treated with a feasible strategy. This study converted it into subgrade soil by cement solidification for resource utilization. Biochar was used as exogenous additive for enhancing compressive strength of the product, simultaneously achieving carbon sequestration. Three biochars derived from peanut shells (PSBC), cow dung (CDBC) and sewage sludge (SSBC) at 300 °C, 500 °C and 700 °C pyrolysis, were added into raw materials with 1%, 2% and 5%, respectively. All biochars significantly improved the compressive strength of the subgrade soil by 20-110%. Biochar catalyzed cement hydration reactions to produce more Ca(OH)2, CaCO3 and calcium silicate hydrates (C-S-H gel). The catalytic capacity of different biochars followed the order of SSBC > PSBC > CDBC. Addition of 2% SSBC500 induced the greatest increase in 28 d-strength from only 1.0 MPa-2.1 MPa, which was due to that 500 °C biochar had a suitable specific surface area and porosity. Biochar facilitated CO2 capture (absorption) during the hydration reactions at the initial 48 h with 55-70 mg g-1. The high alkalinity and water holding capacity of biochar contributed to the absorption of CO2; the high content of minerals in SSBC compared to CDBC and PSBC promoted chemical conversion of CO2 to carbonate. Besides, the biochar itself as carbon rich material was encapsulated in the subgrade soil, which can be regarded as a long-term carbon sequestration strategy. Carbon budget analysis demonstrated that converting one ton dry silt into subgrade soil with addition of 2% biochar could increase CO2 sequestration from 11 kg to 36-94 kg. This study proposes a novel strategy of using biochar to strengthen the subgrade soil simultaneously achieve long-term carbon sequestration.

Effective CO2 capture by in-situ nitrogen-doped nanoporous carbon derived from waste antibiotic fermentation residues

It is of great environmental benefit to rationally dispose of and utilize antibiotic fermentation residues. In this study, oxytetracycline fermentation residue was transformed into an in-situ nitrogen-doped nanoporous carbon material with high CO2 adsorption performance by low-temperature pyrolysis pre-carbonization coupled with pyrolytic activation. The results indicated the activation under mild conditions (600 °C, KOH/OC = 2) was able to increase micropores and reduce the loss of in-situ nitrogen content. The developed microporous structure was beneficial for the filling adsorption of CO2, and the in-situ nitrogen doping in a high oxygen-containing carbon framework also strengthened the electrostatic adsorption with CO2. The maximum CO2 adsorption reached 4.38 mmol g-1 and 6.40 mmol g-1 at 25 °C and 0 °C (1 bar), respectively, with high CO2/N2 selectivity (32/1) and excellent reusability (decreased by 4% after 5 cycles). This study demonstrates the good application potential of oxytetracycline fermentation residue as in-situ nitrogen-doped nanoporous carbon materials for CO2 capture.

Biowastes of slaughterhouses and wet markets: an overview of waste management for disease prevention

Slaughterhouse and wet market wastes are pollutants that have been always neglected by society. According to the Food and Agriculture Organization of the United Nations, more than three billion and nineteen million livestock were consumed worldwide in 2018, which reflects the vast amount and the broad spectrum of the biowastes generated. Slaughterhouse biowastes are a significant volume of biohazards that poses a high risk of contamination to the environment, an outbreak of diseases, and insecure food safety. This work comprehensively reviewed existing biowaste disposal practices and revealed the limitations of technological advancements to eradicate the threat of possible harmful infectious agents from these wastes. Policies, including strict supervision and uniform minimum hygienic regulations at all raw food processing factories, should therefore be tightened to ensure the protection of the food supply. The vast quantity of biowastes also offers a zero-waste potential for a circular economy, but the incorporation of biowaste recycling, including composting, anaerobic digestion, and thermal treatment, nevertheless remains challenging.

Agricultural waste to real worth biochar as a sustainable material for supercapacitor

Biochar made from agricultural waste is gaining more attention in energy field due to its sustainability, low cost, apart from having high supercapacitance performance. Also, it has a wide range of environmental applications, including wastewater treatment, upgrading soil fertility, contaminant immobilization, and in situ carbon sequestration. The existing thermo-chemical methodologies for converting agricultural waste into a sustainable material i.e. biochar and the role of activation agents in enhancing the performance of these materials were critically analyzed and discussed. An overview of recent trends in agricultural waste-derived biochar for supercapacitor electrodes is highlighted in this review that emphasizes green circular economy for encouraging net-zero utility of agriculture waste biomass. The roles of various newly prepared "green" electrolytes in reducing the negative consequences of supercapacitor is also reviewed. The trashing of agricultural waste and the depletion of energy supplies has become a global concern, hurting the world's ecosystem and economy through pollution and a fuel crisis and hence the concept of a green circular economic model is also highlighted.

Fit accuracy of resin crown on a dental model fabricated using fused deposition modeling 3D printing and a polylactic acid filament

Purpose We considered the possibility of reducing industrial waste by fabricating and reusing dental models prepared using a fused deposition modeling (FDM) 3D printer and polylactic acid (PLA) filaments. The purpose of this study was to verify the accuracy of models fabricated using FDM and PLA.Methods The same provisional crown was used to check the marginal fit on PLA models prepared using an intraoral scanner (IOS) and FDM, plaster models made with silicone impression material and plaster, and resin models prepared using an IOS and stereolithography apparatus (SLA) 3D printer. The marginal fit was measured using micro-computed tomography at four points on the tooth: the buccal center (B), palatal center (P), mesial center (M), and distal center (D) points.Results At point B, the marginal gaps were 118 ± 21.7, 62 ± 16.4, and 50 ± 26.5 μm for the PLA, resin, and plaster models, respectively, with a significant difference between the PLA model and the other two. However, the marginal gap at all other measurement points was not significantly different between the models (P > 0.05).Conclusions We compared the accuracy of the models fabricated using the FDM, SLA, and conventional methods. The combination of FDM and PLA filaments showed no significant differences from the other models, except at point B, indicating its usefulness. Therefore, FDM and PLA may become necessary materials for dental treatment in the future.

Sewage sludge derived biochar for environmental improvement: Advances, challenges, and solutions

With the rapid growth yield of global sewage sludge, rational and effective treatment and disposal methods are becoming increasingly needed. Biochar preparation is an attractive option for sewage sludge treatment, the excellent physical and chemical properties of sludge derived biochar make it an attractive option for environmental improvement. Here, the current application state of sludge derived biochar was comprehensively reviewed, and the advances in the mechanism and capacity of sludge biochar in water contaminant removal, soil remediation, and carbon emission reduction were described, with particular attention to the key challenges involved, e.g., possible environmental risks and low efficiency. Several new strategies for overcoming sludge biochar application barriers to realize highly efficient environmental improvement were highlighted, including biochar modification, co-pyrolysis, feedstock selection and pretreatment. The insights offered in this review will facilitate further development of sewage sludge derived biochar, towards addressing the obstacles in its application in environmental improvement and global environmental crisis.

Production of Activated Biochar Derived from Residual Biomass for Adsorption of Volatile Organic Compounds

Volatile organic compounds (VOCs) released in air represent a major potential for environmental pollution. Capture methods based on activated biochar have attracted attention because of their low cost and for the high removal capacity of the material due to its physical and chemical properties. In this paper, activated biochars were developed and their adsorption performance for VOC capture was evaluated. In the first step, biochars derived from rapeseed cake (RSC) and walnut shells (WSC) were obtained through a carbonization process and then were activated using basic/acid agents (KOH/H₂SO₄) to increase their performance as adsorbents. Acetone and toluene were used as the VOC templates. The adsorption capacities of toluene and acetone for non-activated biochars were reduced (26.65 mg/g), while that of activated biochars increased quite significantly, up to 166.72 mg/g, and the biochars activated with H₂SO₄ presented a higher adsorption capacity of VOCs than the biochars activated with KOH. The higher adsorption capacity of biochars activated with H₂SO₄ can be attributed to their large surface area, and also to their larger pore volume. This activated biochar adsorbent could be used with good results to equip air purification filters to capture and remove VOCs.

Food waste valorisation via gasification - A review on emerging concepts, prospects and challenges

Disposing of the enormous amounts of food waste (FW) produced worldwide remains a great challenge, promoting worldwide research on the utilization of FW for the generation of value-added products. Gasification is a significant approach for decomposing and converting organic waste materials into biochar, bio-oil, and syngas, which could be adapted for energy (hydrogen (H₂) and heat) generation and environmental (removal of pollutants and improving the soil quality) applications. Employment of FW matrices for syngas production through gasification is one of the effective methods of energy recovery. This review explains different gasification processes (catalytic and non-catalytic) used for the decomposition of unutilized food wastes and the effect of operating parameters on H₂-rich syngas generation. Also, potential applications of gasification byproducts such as biochar and bio-oil for effective valorization have been discussed. Besides, the scope of simulation to optimize the gasification conditions for the effective valorization of FW is elaborated, along with the current progress and challenges in the research to identify the feasibility of gasification technology for FW. Overall, this review concludes the sustainable route for conversion of unutilized food into hydrogen-enriched syngas production.

The Capture and Transformation of Carbon Dioxide in Concrete: A Review

Concrete is one of the most commonly used engineering materials in the world. Carbonation of cement-based materials balances the CO2 emissions from the cement industry, which means that carbon neutrality in the cement industry can be achieved by the carbon sequestration ability of cement-based materials. Carbon dioxide is a symmetrical molecule and is difficult to separate. This work introduces the important significance of CO2 absorption by using cement-based materials, and summarizes the basic characteristics of carbonation of concrete, including the affected factors, mathematical modeling carbonization, and the method for detecting carbonation. From the perspective of carbon sequestration, it mainly goes through carbon capture and carbon storage. As the first stage of carbon sequestration, carbon capture is the premise of carbon sequestration and determines the maximum amount of carbon sequestration. Carbon sequestration with carbonization reaction as the main way has been studied a lot, but there is little attention to carbon capture performance. As an effective way to enhance the carbon sequestration capacity of cement-based materials, increasing the total amount of carbon sequestration can become a considerably important research direction.

Designer biochar with enhanced functionality for efficient removal of radioactive cesium and strontium from water

Radioactive elements released into the environment by accidental discharge constitute serious health hazards to humans and other organisms. In this study, three gasified biochars prepared from feedstock mixtures of wood, chicken manure, and food waste, and a KOH-activated biochar (40% food waste + 60% wood biochar (WFWK)) were used to remove cesium (Cs⁺) and strontium (Sr²⁺) ions from water. The physicochemical properties of the biochars before and after adsorbing Cs⁺ and Sr²⁺ were determined using X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, extended X-Ray absorption fine structure (EXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX). The WFWK exhibited the highest adsorption capacity for Cs⁺ (62.7 mg/g) and Sr²⁺ (43.0 mg/g) among the biochars tested herein. The removal of radioactive ¹³⁷Cs and ⁹⁰Sr exceeded 80% and 47%, respectively, in the presence of competing ions like Na⁺ and Ca²⁺. The functional groups present in biochar, including -OH, -NH₂, and -COOH, facilitated the adsorption of Cs⁺ and Sr²⁺. The Cs K-edge EXAFS spectra revealed that a single coordination shell was assigned to the Cs-O bonding at 3.11 Å, corresponding to an outer-sphere complex formed between Cs and the biochar. The designer biochar WFWK may be used as an effective adsorbent to treat radioactive ¹³⁷Cs- and ⁹⁰Sr-contaminated water generated during the operation of nuclear power plants and/or unintentional release, owing to the enrichment effect of the functional groups in biochar via alkaline activation.

A green approach towards sorption of CO2 on waste derived biochar

Carbon capture technologies have advanced in recent years to meet the ever-increasing quest to minimize excessive anthropogenic CO₂ emissions. The most promising option for CO₂ control has been identified as carbon capture and storage. Among the numerous sorbents, char generated from biomass thermal conversion has shown to be an efficient CO₂ adsorbent. This study examines various characteristics that can be used to increase the yield of biochar suited for carbon sequestration. This review gives recent research progress in the area, stressing the variations and consequences of various preparation processes on textural features such as surface area, pore size and sorption performance with respect to CO₂'s sorption capacity. The adjoining gaps discovered in this field have also been highlighted herewith, which will serve as future work possibility. It aims to analyse and describe the possibilities and potential of employing pristine and modified biochar as a medium of CO₂ capture. It also examines the parameters that influence biochar's CO₂ adsorption ability and pertinent challenges regarding the production of biochar-based CO₂ sorbent materials.

Impact of sulfur-impregnated biochar amendment on microbial communities and mercury methylation in contaminated sediment

S-impregnation of biochar through elemental S streaming is known to increase its sorption performance against Hg and methyl mercury (MeHg). However, the effects of %S-loading on biochar's mechanism and sorption capacities for MeHg, and its consequent impact when used as an amendment material for Hg-contaminated sediments, are poorly understood, and thus, were investigated in this work. Our results showed that a minimum sulfur loading of 1% was the most effective in reducing MeHg levels in sediments. At higher %S-loading (3-20%), the reduction in surface area, pore blockage due to unreacted sulfur particles, and presence of poorly bound sulfur species resulted in lowered effectiveness for MeHg control. Increasing S-functionalization during impregnation shifted the sorption process of MeHg from Hg-O to Hg-S in S-impregnated biochar (BCS). Our 60-day slurry experiment showed a significant reduction in pore water THg (40-70%) and MeHg (30-55%), as well as sediment MeHg (50-60%) in biochar-amended sediments. The reduction in the bioavailable Hg resulted in lowered Hg methylation, as supported by the suppression of both the Fe- and SO₄^2--reduction activities in the amended sediments. The microbial community structure in BCS-amended sediments showed a shift towards sulfur-consuming, iron-reducing, thiosulfate-oxidizing, and sulfate-reducing bacterial populations. At the genus level, the overall relative abundance of principal Hg methylators was also lower in the BCS treatment than in the unamended sediments. This study highlights the application of BCS as a promising strategy for remediation of Hg-contaminated sediments.

Integrated system of anaerobic digestion and pyrolysis for valorization of agricultural and food waste towards circular bioeconomy: Review

Agricultural and food waste have become major issue affecting the environment and climate owing to growing population. However, such wastes have potential to produce renewable fuels which will help to meet energy demands. Numerous valorization pathways like anaerobic digestion, pyrolysis, composting and landfilling have been employed for treating such wastes. However, it requires integrated system that could utilize waste and promote circular bioeconomy. This review explores integration of anaerobic digestion and pyrolysis for treating agricultural and food waste. Proposed system examines the production of biochar and pyro-oil by pyrolysis of digestate. The use of this biochar for stabilizing anaerobic digestion process, biogas purification and soil amendment will promote the circular bioeconomy. Kinetic models and framework of techno-economic analysis of system were discussed and knowledge gaps have been identified for future research. This system will provide sustainable approach and offer carbon capture and storage in form of biochar in soil.

From polyvinyl chloride waste to activated carbons: the role of occurring additives on porosity development and gas adsorption properties

Conversion of waste plastic to carbon materials has been considered as a potential approach for plastic recycling. In this study, polyvinyl chloride (PVC) plastic, one of the most widely used polymers, was used as a single precursor to prepare porous carbons via chemical activation process. The results showed that KOH activation followed by acid washing was an effective strategy to recover all calcium- and up to 92% of titanium-based compounds, the main metal additives in PVC, in the form of soluble salt. Those metal additives in PVC acted as a type of hard template, which benefit the development of microporosity and carbon dioxide (CO₂) adsorption. Textural characterization demonstrated that the prepared carbons possessed high surface area and pore volume of up to 2507 m²/g and 1.11 cm³/g, respectively. At 0 °C and 100 kPa, the PVC-derived carbon, PH_73, which has highest ultra-micropore volume among all samples, exhibited excellent CO₂ adsorption capacity of 6.90 mmol/g and high CO₂/N₂ selectivity. Converting the non-degradable PVC into high-quality porous carbon materials could be considered as a potential strategy for plastic waste recycling.

Effects of biochar underwent different aging processes on soil properties and Cd passivation

This study aims to determine the efficacy of biochar underwent different aging process including freeze-thaw cycling aging (FB), acidified aging (AB), and microbial aging (MB) on soil physicochemical properties and Cd passivation. The Cd-contaminated soil (3 mg·kg^-1) amended with the three kinds of aging biochar (at 4% w:w) were subjected to 56-day incubation. The application of FB and MB in soil increased the soil pH (0.82-1.04, 0.27-9.36), CEC (1.06-2.53 cmol·kg^-1, 1.66-2.59 cmol·kg^-1), and organic matter content (2.28-4.67 g·kg^-1, 3.70-5.48 g·kg^-1). FB performed best in stabilizing Cd (17.06-23.65%). On the contrary, AB decreased the soil pH and CEC by 0.82-1.04 and 1.32-2.40 cmol·kg^-1 and activated Cd by 11.6-19.24%. In conclusion, the efficacy of biochar on soil remediation and Cd passivation varied with aging method and cycle, and freeze-thaw treatment is an effective approach to improve the performance of biochar.

Renewable biochar derived from mixed sewage sludge and pine sawdust for carbon dioxide capture

Carbon dioxide (CO₂) is the main anthropogenic greenhouse gas contributing to global warming. In this study, a series of KOH-modified biochars derived from feedstock mixtures (i.e., S3W7 biomass consisting of 70% pine sawdust and 30% sewage sludge; S5W5 biomass consisting of 50% pine sawdust and 50% sewage sludge) at different temperature (i.e., 600-800 °C) were prepared for evaluating CO₂ adsorption performance. The KOH-activated biochars prepared with S3W7 biomass displayed larger surface areas and micropore volumes compared to those of S5W5 biochars. In particular, the highest CO₂ adsorption capacity (177.1 mg/g) was observed on S3W7 biomass at 700 °C (S3W7-700K), due to the largest surface area (2623 m²/g) and the highest micropore volume (0.68 cm³/g). Furthermore, surface functional groups, hydrophobicity, and aromaticity of biochar and presence of hetero atoms (N) also were actively involved in CO₂ adsorption of biochar. In addition, in situ DRIFTS analysis advanced current understanding for the chemical sorption mechanisms by identifying the transformation composites of CO₂ on biochars, and characterizing the weakly adsorbed and newly formed mineral species (e.g., carbonates) during the CO₂ sorption process. This study may provide an insight into the research of CO₂ capture by identifying physical and chemical adsorption, and expand the effective utilization of natural biomass-based biochar for mitigation greenhouse gas emission.

Effect of Pore Structure on CO2 Adsorption Performance for ZnCl2/FeCl3/H2O(g) Co-Activated Walnut Shell-Based Biochar

Walnut shell is a very potential biochar precursor because of its wide source, low cost, and easy structure modification. In this paper, the co-activation method of FeCl3, ZnCl2 and H2O(g) was adopted to prepare walnut shell-based biochar with high microporosity and the effect of pore structure on CO2 adsorption performance at different temperatures was investigated. The prepared biochar had a larger specific surface area (2647.8 m2 g−1), satisfactory micropore area (2008.7 m2 g−1) and high total pore volume (2.58 cm3 g−1). At 273 K and 298 K, its CO2 adsorption capacity was 4.79 mmol g−1 and 3.20 mmol g−1, respectively. Particularly, CO2 adsorbed uptake on biochar was strongly sensitive to their narrow micropore volume, instead of the total specific surface area, total pore volume, and micropore specific surface area. The optimal pore size beneficial for CO2 adsorption was 0.33–0.82 nm at 273 K, but the optimal pore size was 0.33–0.39 nm at 298 K. It provides theoretical guidance for future material preparation and selection, and FeCl3, ZnCl2 and H2O(g) may be effective biochar activators.

Biochar from microwave co-pyrolysis of food waste and polyethylene using different microwave susceptors - Production, modification and application for metformin removal

Biochar (BC) production by microwave (MW) co-pyrolysis of food waste (FW) with polyethylene (PE) (mixed in a ratio of 8:1) was performed in the present study using different MW susceptors, i.e. granular activated carbon (G), silica gel (S), cement (C) and flyash (F). BC yield varied from 37 wt% to 45 wt%. The highest yield of 45 wt% was obtained with flyash as MW susceptor. All BC exhibited increased carbon content (57.1-69.0 wt%), fixed carbon (76.0-85.3 wt%), and porous structure with improved thermal stability than the feedstock. The inferential plot exhibited an inverse relationship between yield and carbon of BC with loss tangent (tan δ) and specific surface area (SSA) of the MW susceptor. Alkali (potassium phosphate) modified F-BC (K-F-BC) showed further improvement in porous structures with a good cavity and presence of carbonyl group (CO) and hydroxide group (O-H) on its surface, which showed good adsorptive removal of metformin (MET). Alkali modification of F-BC improved the adsorption capacity by ∼8 times; thus, resulting in ∼62% MET removal within 5 min. Kinetic models suggested the MET adsorption on BC predominantly controlled by intra-particle diffusion (R² = 0.72-0.98). Adsorption of MET with S-BC and F-BC followed Langmuir isotherm (R² = 0.99). On the other hand, G-BC, C-BC and K-F-BC followed Freundlich isotherm (R² = 0.99). Maximum MET adsorption of 0.17 mg/g, 0.23 mg/g, 0.26 mg/g and 0.27 mg/g were observed with F-BC, G-BC, S-BC and C-BC respectively. Alkali modification of F-BC (K-F-BC) improved its adsorption capacity up to 0.34 mg/g. The Surface deposition, pore filling, π-π interaction and chemical bonding of functional groups with K-F-BC were the predominant mechanisms of MET removal by K-F-BC.

Insights into CO2 adsorption on KOH-activated biochars derived from the mixed sewage sludge and pine sawdust

The environment issues associated with global warming and climate change caused by continuous increase in greenhouse gas emissions have attracted worldwide concerns. As renewable resources with good adsorption property, biochar is an efficient and environmental friendly adsorbsent for CO₂ capture. In this study, the CO₂ adsorption behavior of biochars derived from feedstock mixtures of 70% pine sawdust and 30% sewage sludge by KOH modification was investigated. The textual properties and functional groups of the pristine biochars have been significantly enhanced after KOH activation. With highly developed microporosity, the specific surface area (SSA) of the KOH-modified biochars increased by 3.9-14.5 times. Furthermore, higher CO₂ adsorption capacities of 136.7-182.0 mg/g were observed for the modified biochars, compared to pristine ones (35.5-42.9 mg/g). The development of micropores by KOH activation significantly increased the CO₂ adsorption capacity. Meanwhile, the presence of hetero atoms (O and K) also positively influenced CO₂ adsorption capacity of biochar. Noticeably, both physical and chemical adsorption played a crucial role in CO₂ capture, which was verified by different characterization methods including high resolution scanning electron microscope, X-ray photoelectron spectroscopy and in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. The Findings of this study demonstrate the -significance of chemical sorption by identifying the transformation of CO₂ by biochar composites and in situ characterization of weakly adsorbed and newly formed mineral species during the CO₂ sorption process. Moreover, BC700K showed 97% recyclability during 10 consecutive adsorption-desorption cycles at 25 °C, 1 bar. The results obtained in the present study may inspire new research interest and provide a comprehensive insight into the research subject to biochars derived from feedstock mixtures for CO₂ capture.

Pyrolysis of domestic sewage sludge: influence of operational conditions on the product yields using factorial design

This study aims to investigate a sustainable method for sewage sludge (SS) safe disposal and reuse. The study involved exploring the optimum parameters of thermal treatment of SS by pyrolysis to produce biochar. Based on the analysis of the full factorial design, the effects of pyrolysis conditions: temperature, heating rate, and isothermal time on pyrolysis product yields were evaluated. The average yield of biochar was significantly reduced when the pyrolysis temperature was increased from 300 to 500 °C, while the average yields of bio-oil (BO) and non-condensable gases (NCGs) were increased. The yield of biochar was nearly the same when the heating rate was increased from 5 to 35 °C/min, while the yield of BO was increased and the yield of NCGs was decreased. The average yields of biochar and NCGs were reduced when the isothermal time was increased from 45 to 120 min, while the yield of BO was slightly increased. Factorial design methodology revealed all potential interactions between the variables of the pyrolysis process of SS. To predict pyrolysis product yields, first-order regression models were developed based on the effects' magnitude of the process parameters and their interactions. The models were agreed to the experimental data.

C/N-Dependent Element Bioconversion Efficiency and Antimicrobial Protein Expression in Food Waste Treatment by Black Soldier Fly Larvae

The black soldier fly (BSF), Hermetia illucens, has emerged as a promising species for waste bioconversion and source of antimicrobial proteins (AMPs). However, there is a scarcity of research on the element transformation efficiency and molecular characterization of AMPs derived from waste management. Here, food waste treatment was performed using BSF larvae (BSFL) in a C/N ratio of 21:1−10:1, with a focus on the C/N-dependent element bioconversion, AMP antimicrobial activity, and transcriptome profiling. The C-larvae transformation rates were found to be similar among C/Ns (27.0−35.5%, p = 0.109), while the N-larvae rates were different (p = 0.001), with C/N 21:1−16:1 (63.5−75.0%) being higher than C/N 14:1−10:1 (35.0−45.7%). The C/N ratio did not alter the antimicrobial spectrum of AMPs, but did affect the activities, with C/N 21:1 being significantly lower than C/N 18:1−10:1. The lysozyme genes were found to be significantly more highly expressed than the cecropin, defensin, and attacin genes in the AMP gene family. Out of 51 lysozyme genes, C/N 18:1 and C/N 16:1 up-regulated (p < 0.05) 14 and 12 genes compared with C/N 21:1, respectively, corresponding to the higher activity of AMPs. Overall, the element bioconversion efficiency and AMP expression can be enhanced through C/N ratio manipulation, and the C/N-dependent transcriptome regulation is the driving force of the AMP difference.

Synergy of developed micropores and electronic structure defects in carbon-doped boron nitride for CO2 capture

With the aim of relieving the serious environmental and climate issues arising from excessive emission of anthropogenic CO₂, extensive solid absorbents have been developed for CO₂ capture. Among them, porous boron nitride (BN) is considered an ideal candidate due to its high specific surface area, abundant structural defects, low density, and outstanding chemical inertness. Herein, BN absorbents were synthesized from pyrolysis of melamine-boric acid precursors, and the effect of pyrolysis temperature (900, 1000, 1050 and 1100 °C) on the properties and performances was investigated. Various characterizations were performed to evaluate the physicochemical properties and CO₂ uptake capacities of BN absorbents. The result demonstrated that a carbon-doped BN structure was achieved instead of a pure BN material, and the carbonization degree was enhanced with the increase of pyrolysis temperatures. BN absorbent pyrolyzed at 1100 °C exhibited the highest CO₂ adsorption capacity of 3.71 mmol/g (273 K). The reason should be that the doping of carbon in the framework of BN contributed to the formation of abundant micropores, which enhanced the physical adsorption by offering more adsorption sites. At the same time, more negative charges on BN were induced by structural defects, which favored the chemical adsorption of CO₂ by invoking charge-induced chemisorption interaction. This study clarified the role of pore structure and electronic structure defects in CO₂ adsorption capacity of carbon-doped BN, which would open up more spacious avenues for the development of promising BN-based absorbents, or even catalysts.

Spent mushroom substrate is capable of physisorption-chemisorption of CO2

No in-depth investigation exists on the feasibility of integrating hydrothermal carbonization (HTC) and pelletization into the process of making spent mushroom substrate (SMS), an agro-food residue from the commercial mushroom industry, into an adsorbent for post-combustion CO₂ removal. Therefore, this study analyzed if it could be possible for systematically converting low-pressure hydrochars of various SMSs into carbon-adsorbing mini-capsules. Sources of SMS included paddy straw and achiote capsule shell from Pleurotus ostreatus; eucalyptus sawdust and grassy straw from Lentinula edodes; and compost containing peat or soil as casing layer from Agaricus subrufescens. The eucalyptus sawdust and grassy straw from L. edodes outperformed the other biomaterials in adsorbing CO₂, and thus effectively encapsuled most of the gas, 8.25 mmol g^-1 and 8.10 mmol g^-1, respectively. They contained mostly hetero-atoms of O and N, requiring less unit energy to bind acidic molecules of CO₂ at the alkaline sites. The amount of unit energy the pore-filling process demanded at 25 °C was 12.65 kJ mol^-1, an attribute of self-sustaining and saleable physisorption. A negative 6.80 kJ mol^-1 free energy validated both spontaneity and exothermal of biocarbons at steady-state atmosphere. The major findings and innovations of our study support utilizing SMS as an adsorbent as a carbon capture, storage and utilization networking. Our insights into the physisorption-chemisorption on SMS are timely and relevant to help manage the re-use of SMS, and thus bring the global mushroom industry closer to environmental sustainability and toward a lower carbon society and circular economy.

State-of-the-art of the pyrolysis and co-pyrolysis of food waste: Progress and challenges

The continuous growth of population and the steady improvement of people's living standards have accelerated the generation of massive food waste. Untreated food waste has great potential to harm the environment and human health due to bad odor release, bacterial leaching, and virus transmission. However, the application of traditional disposal techniques like composting, landfilling, animal feeding, and anaerobic digestion are difficult to ease the environmental burdens because of problems such as large land occupation, virus transmission, hazardous gas emissions, and poor efficiency. Pyrolysis is a practical and promising route to reduce the environmental burden by converting food waste into bioenergy. This paper aims to analyze the characteristics of food waste, introduce the production of biofuels from conventional and advanced pyrolysis of food waste, and provide a basis for scientific disposal and sustainable management of food waste. The review shows that co-pyrolysis and catalytic pyrolysis significantly impact the pyrolysis process and product characteristics. The addition of tire waste promotes the synthesis of hydrocarbons and inhibits the formation of oxygenated compounds efficiently. The application of calcium oxide (CaO) exhibits good performance in the increment of bio-oil yield and hydrocarbon content. Based on this literature review, pyrolysis can be considered as the optimal technique for dealing with food waste and producing valuable products.

How the Carbonization Time of Sugarcane Biomass Affects the Microstructure of Biochar and the Adsorption Process?

Biochars (BCs) are very versatile adsorbents, mainly, in the effectiveness of adsorption of organic and inorganic compounds in aqueous solutions. Here, the sugarcane biomass (SCB) was used to produce biochar at different carbonization times: 1, 2, 3, 4, and 5 h, denominated as BC1, BC2, BC3, BC4, and BC5, respectively. The superficial reactivity was studied with adsorption equilibrium experiments and kinetics models; Methylene Blue (MB) was used as adsorbate at different pH values, concentrations, and temperatures. In summary, the carbonization time provides the increase of superficial area, with exception of BC4, which decreased. Equilibrium studies showed inflection points and fluctuations with different initial dye concentration and temperature; SCB showed the best adsorption capacity compared to the BCs at the three temperatures tested, varying with the increase of MB concentration, suggesting the dependence of these two main factors on the adsorption process. The proposed adsorption mechanism suggests the major influence of Coulomb interactions, H-bonding, and π-interactions on the adsorption of MB onto adsorbents, evidencing that the adsorption is led by physical adsorption. Therefore, the results led to the use of the SCB without carbonization at 200 °C, saving energy and more adsorbent mass, considering that the carbonization influences weight loss. This study has provided insights of the use of SCB in MB dye adsorption as a low-cost and eco-friendly adsorbent.

Olive Mill by-Products Thermochemical Conversion via Hydrothermal Carbonization and Slow Pyrolysis: Detailed Comparison between the Generated Hydrochars and Biochars Characteristics

In this research work, an ecofriendly approach was adopted for the treatment of two abundant liquid and solid agricultural wastes generated by olive mill industry: olive mill wastewater (OMWW) and raw olive pomace (ROP). It consists, firstly of the impregnation of ROP by OMWW and the conversion of the resulting impregnated sample (IROP) into hydrochars and biochars through hydrothermal carbonization (HTC) and slow pyrolysis methods, respectively. The impact of the treatment temperature on the physico-chemical properties of the derived chars was assessed by various analytical techniques. The hydrochars production yields were found to be higher than the biochars ones and associated to the lower temperature used. However, the generated biochars possess higher carbon percentage and lower volatile matter contents. In addition, the increase of the hydrothermal and pyrolysis carbonization temperatures shows an increase of macro-elements contents and a significant decrease of the O/C ratios which led to an enhancement of the high heating value for both hydrochars and biochars. The FTIR and Boehm titration analysis highlighted a significant alteration of the biochars surface chemistry compared to hydrochars evidenced by the lower amount of functional groups. The collected data emphasize on the efficient potential application of hydrochars and biochars for agricultural and environmental applications, respectively. Furthermore, it was noted that both chars have high energetic potentials and could be used for co-firing with coal in industrial boilers.

Effects of different order spiking on bioavailability and ecological risk of phenanthrene in mangrove sediment-biochar system

Biochar shows unique advantage in decreasing the bioavailability of phenanthrene and has huge potential into the in-situ remediation of contaminated sediment. The different order spiking influences the bioavailability and ecological risk of phenanthrene, this study provides a comprehensive investigation of biochar (derived from mangrove Kandelia obovata -sediment system under three conditions: I) co-addition of biochar and sediment; II) biochar and subsequently sediment addition (after biochar adsorption reached equilibrium); III) sediment and subsequently biochar addition (after sediment adsorption reached equilibrium). It was observed that the adsorption capability under model I and III was much smaller than that under model II (p < 0.05). Regardless of time, K. obovate - biochar significantly (p < 0.05) increase the sorption of phenanthrene in sediment -water system. The results provide valuable studies for further in-situ remediation of phenanthrene and engineering applications.

New mechanistic insight into rapid adsorption of pharmaceuticals from water utilizing activated biochar

The presence of emerging pollutants especially hazardous chemicals and pharmaceuticals in aquatic environments is a matter of grave concern to human health and the environment. In this study, coffee bean waste (CBW) was utilized to synthesize pristine (CBW₅₅₀) and activated (CBW₅₅₀^HPO) biochars for the elimination of diclofenac (DF) and levofloxacin (LEV) from water. A facile two-step approach was used to synthesize CBW₅₅₀^HPO using chemical pretreatment and pyrolysis under N₂ purging. BET results of CBW₅₅₀^HPO revealed that chemical pretreatment increased surface area by approximately 160 times compared to CBW₅₅₀. The calculated I_D/I_G ratio from Raman spectra confirmed that CBW₅₅₀^HPO had a high functionalized surface. Different operational parameters such as contact time, pH, adsorbent dose, ionic strength, and adsorbate concentration were studied and optimized. Maximum Langmuir adsorption capacity of CBW₅₅₀^HPO was found to be 61.17 and 110.70 mg/g for DF and LVX, respectively. Experimental results demonstrated that presence of NaCl in solution enhanced DF removal efficiency due to the salting-out effect. Electrostatic attraction, π-π bonding, and hydrophobic interaction were prominently responsible mechanisms for the adsorption of DF and LVX. Furthermore, continuous-flow mode studies confirmed that CBW₅₅₀^HPO can be successfully utilized in large-scale treatment applications.

Review on upgrading organic waste to value-added carbon materials for energy and environmental applications

Value-added materials such as biochar and activated carbon that are produced using thermo-chemical conversion of organic waste have gained an emerging interest for the application in the fields of energy and environment because of their low cost and unique physico-chemical properties. Organic waste-derived materials have multifunctional abilities in the field of environment for capturing greenhouse gases and remediation of contaminated soil and water as well as in the field of energy storage and conversion. This review critically evaluates and discusses the current thermo-chemical approaches for upgrading organic waste to value-added carbon materials, performance enhancement of these materials via activation and/or surface modification, and recent research findings related to energy and environmental applications. Moreover, this review provides detailed guidelines for preparing high-performance organic waste-derived materials and insights for their potential applications. Key challenges associated with the sustainable management of organic waste for ecological and socio-economic benefits and potential solutions are also discussed.

Biochar utilisation in the anaerobic digestion of food waste for the creation of a circular economy via biogas upgrading and digestate treatment

A wood waste-derived biochar was applied to food-waste anaerobic digestion to evaluate the feasibility of its utilisation to create a circular economy. This biochar was first purposed for the upgrading of the biogas from the said anaerobic digestion, before treating and recovering the nutrients in the solid fraction of the digestate, which was finally employed as a biofertilizer for the organic cultivation of three green leafy vegetables: kale, lettuce and rocket salad. Whilst the amount of CO₂ the biochar could absorb from the biogas was low (11.17 mg g^-1), it could potentially be increased by modifying through physical and chemical methods. Virgin as well as CO₂-laden biochar were able to remove around 31% of chemical oxygen demand, 8% of the ammonia and almost 90% of the total suspended solids from the digestate wastewater, which was better than a dewatering process via centrifugation but worse than the industry standard of a polytetrafluoroethylene membrane bioreactor. Nutrients were recovered in the solid fraction of the digestate residue filtered by the biochar, and utilised as a biofertilizer that performed similarly to a commercial complete fertilizer in terms of aerial fresh weight growth for all three vegetables cultivated. Contingent on the optimal upgrading of biogas, the concept of a circular economy based on biochar and anaerobic digestion appears to be feasible.

Circular utilization of food waste to biochar enhances thermophilic co-digestion performance

Codigestion is an emerging approach to improve wastewater sludge biogas production and valorize food waste (FW). This study explores FW-derived biochar as a codigestion amendment for the first time and reports a matrix experiment using four diverse biochar amendments (mixed food waste, pinewood, bonechar, unamended control) across four FW types (vegetable, rice, chicken, mixed). It demonstrated that biochar derived from mixed FW can greatly improve the performance of biogas production and yield relative to unamended control and other biochars. The mixed food waste (MFW) biochar amendment led to 34.5%, 35.6%, and 47.5% increase in methane production from mixed FW compared to biochars made of wood, bone and non-amendment control, and the maximum methane production rate of MFW biochar reactors could be up to 6.7-9.9 times of the control. These results suggest that a more circular utilization of FW by integrating biochar production with codigestion can bring great benefits to FW management.

Facile synthesis of tailored mesopore-enriched hierarchical porous carbon from food waste for rapid removal of aromatic VOCs

Due to the large amount, environmental impact, and complex properties of accumulated food waste, its disposal and valorization has become a growing global concern and challenges. In this study, a series of mesopore-enriched hierarchical porous carbons were synthesized from a mixture of two food waste components (peptone and bone). The prepared materials were employed for the rapid adsorption of aromatic volatile organic compounds (VOCs). The pore structures, morphology and surface chemistry of the food waste-based microporous activated carbon (PCs) and mesopore-enriched hierarchical porous carbons (PC/BCs) were characterized and then compared. PC/BCs presented larger pore volume (2.45 cm³/g vs. 1.25 cm³/g) than the PCs because of their activation and the template effect of the bone, allowing them to exhibit satisfactory adsorption capacities (139.5 mg/g for benzene and 440.7 mg/g for toluene) and adsorption rate (0.285 min^-1 for benzene and 0.236 min^-1 for toluene) for aromatic VOCs. In addition, a strong linear relationship (R² = 0.957) was also established between the adsorption rate k and total pore volume, highlighting the role of mesopores in PC/BCs, which contributed 60% to the total pore volume, during the rapid capture of VOCs. Further, PC/BCs also showed excellent thermal regeneration performance for more than four runs. The results of this study provide a feasible approach to fabricating mesopore-enriched hierarchical porous carbon from food waste, which could enable the rapid removal of VOCs.

A review on the valorisation of food waste as a nutrient source and soil amendment

Valorisation of food waste offers an economical and environmental opportunity, which can reduce the problems of its conventional disposal. Food waste is commonly disposed of in landfills or incinerated, causing many environmental, social, and economic issues. Large amounts of food waste are produced in the food supply chain of agriculture: production, post-harvest, distribution (transport), processing, and consumption. Food waste can be valorised into a range of products, including biofertilisers, bioplastics, biofuels, chemicals, and nutraceuticals. Conversion of food waste into these products can reduce the demand of fossil-derived products, which have historically contributed to large amounts of pollution. The variety of food chain suppliers offers a wide range of feedstocks that can be physically, chemically, or biologically altered to form an array of biofertilisers and soil amendments. Composting and anaerobic digestion are the main large-scale conversion methods used today to valorise food waste products to biofertilisers and soil amendments. However, emerging conversion methods such as dehydration, biochar production, and chemical hydrolysis have promising characteristics, which can be utilised in agriculture as well as for soil remediation. Valorising food waste into biofertilisers and soil amendments has great potential to combat land degradation in agricultural areas. Biofertilisers are rich in nutrients that can reduce the dependability of using conventional mineral fertilisers. Food waste products, unlike mineral fertilisers, can also be used as soil amendments to improve productivity. These characteristics of food wastes assist in the remediation of contaminated soils. This paper reviews the volume of food waste within the food chain and types of food waste feedstocks that can be valorised into various products, including the conversion methods. Unintended consequences of the utilisation of food waste as biofertilisers and soil-amendment products resulting from their relatively low concentrations of trace element nutrients and presence of potentially toxic elements are also evaluated.

Effects of Process Parameters on Sulfur Migration and H2S Generation during Supercritical Water Gasification of Sludge

The generation of sulfur-containing pollution products affects the quality of biofuels obtained from the supercritical water gasification (SCWG) of sludge. This study investigates the effects of the gasification temperature, moisture content, and reaction atmosphere on the evolution of sulfur-containing compounds. The results showed that temperature was the key parameter causing the migration of sulfur from sludge to biogas and liquid products. The sludge decomposition reaction was dominated by ionic reactions at 360 °C, while the decomposition of organic matter was converted to free radical reactions as the temperature increased from 380 °C to 440 °C. The mercaptan and thioether contents of the bio-oil decreased to 0.3% at 440 °C. Correspondingly, the concentration of H₂S increased from 6.7 ppm to 38.0 ppm. The decomposition of organic sulfur with an unstable structure (S-H bond and S-C bond) was the main cause of the increase in the content of H₂S. Additionally, the solubility and oxidation properties of supercritical water were extremely strong. Some sulfur-containing organic compounds were converted into SO₄^2- via hydrolysis and oxidation reactions, forming sulfate crystals with heavy metals in the bio-char, which aided in achieving the synergistic immobilization of sulfur and heavy metals.

A review on facilitating bio-wastes degradation and energy recovery efficiencies in anaerobic digestion systems with biochar amendment

In this review, progress in the potential mechanisms of biochar amendment for AD performance promotion was summarized. As adsorbents, biochar was beneficial for alleviating microbial toxicity, accelerating refractory substances degradation, and upgrading biogas quality. The buffering capacity of biochar balanced pH decreasing caused by volatile fatty acids accumulation. Moreover, biochar regulated microbial metabolism by boosting activities, mediating electron transfer between syntrophic partners, and enriching functional microbes. Recent studies also suggested biochar as potential useful additives for membrane fouling alleviation in anaerobic membrane bioreactors (AnMBR). By analyzing the reported performances based on different operation models or substrate types, debatable issues and associated research gaps of understanding the real role of biochar in AD were critically discussed. Accordingly, Future perspectives of developing biochar-amended AD technology for real-world applications were elucidated. Lastly, with biochar-amended AD as a core process, a novel integrated scheme was proposed towards high-efficient energy-resource recovery from various bio-wastes.

A Review of Non-Soil Biochar Applications

Biochar is the solid residue that is recovered after the thermal cracking of biomasses in an oxygen-free atmosphere. Biochar has been used for many years as a soil amendment and in general soil applications. Nonetheless, biochar is far more than a mere soil amendment. In this review, we report all the non-soil applications of biochar including environmental remediation, energy storage, composites, and catalyst production. We provide a general overview of the recent uses of biochar in material science, thus presenting this cheap and waste-derived material as a high value-added and carbonaceous source.