Understanding the role of bacterial cellular adsorption, accumulation and bioavailability regulation by biosurfactant in affecting biodegradation efficacy of polybrominated diphenyl ethers

Study on the mechanism and degradation behavior of Encifer adhaerens DNM-S1 capturing dimethyl phthalate

The global concern surrounding pollution caused by phthalates is escalating, with dimethyl phthalate (DMP) emerging as one of the most prevalent contaminants within the phthalates (PAEs) category. Although the biodegradation of DMP is considered both safe and efficient, its underlying degradation mechanism is not yet fully elucidated, and the degradation performance can be somewhat inconsistent. To address this issue, our study isolated a DMP-degrading bacterium (DNM-S1) from a vegetable greenhouse. The resulting data revealed that DNM-S1 exhibited a remarkable degradation performance, successfully degrading 84.98% of a 2000 mg L-1 DMP solution within 72 h. Remarkably, it achieved complete degradation of a 50 mg L-1 DMP solution within just 3 h. DMP degradation by DNM-S1 was also found to be efficient even under low-temperature conditions (10 °C). Our research further indicates that DNM-S1 is capable of capturing DMP through the ester bond in the bacterium's cell wall fatty acids, forming hydrogen bonds through hydrophobic interactions. The DMP was then transported into the DNM-S1 protoplasm using an active transport mechanism. Interestingly, the secondary metabolites of DNM-S1 contained natural carotenoids, which could potentially counteract the damaging effects of PAEs on cell membrane permeability. In summary, these findings highlight the potential of DNM-S1 in addressing PAEs pollution and provide new insights into the metabolic mechanism of PAEs degradation.

Determining the Contribution of Micro/Nanoplastics to Antimicrobial Resistance: Challenges and Perspectives

Microorganisms colonizing the surfaces of microplastics form a plastisphere in the environment, which captures miscellaneous substances. The plastisphere, owning to its inherently complex nature, may serve as a "Petri dish" for the development and dissemination of antibiotic resistance genes (ARGs), adding a layer of complexity in tackling the global challenge of both microplastics and ARGs. Increasing studies have drawn insights into the extent to which the proliferation of ARGs occurred in the presence of micro/nanoplastics, thereby increasing antimicrobial resistance (AMR). However, a comprehensive review is still lacking in consideration of the current increasingly scattered research focus and results. This review focuses on the spread of ARGs mediated by microplastics, especially on the challenges and perspectives on determining the contribution of microplastics to AMR. The plastisphere accumulates biotic and abiotic materials on the persistent surfaces, which, in turn, offers a preferred environment for gene exchange within and across the boundary of the plastisphere. Microplastics breaking down to smaller sizes, such as nanoscale, can possibly promote the horizontal gene transfer of ARGs as environmental stressors by inducing the overgeneration of reactive oxygen species. Additionally, we also discussed methods, especially quantitatively comparing ARG profiles among different environmental samples in this emerging field and the challenges that multidimensional parameters are in great necessity to systematically determine the antimicrobial dissemination risk in the plastisphere. Finally, based on the biological sequencing data, we offered a framework to assess the AMR risks of micro/nanoplastics and biocolonizable microparticles that leverage multidimensional AMR-associated messages, including the ARGs' abundance, mobility, and potential acquisition by pathogens.

Chemical reductive technologies for the debromination of polybrominated diphenyl ethers: A review

Polybrominated diphenyl ethers (PBDEs) are widely used as brominated flame retardants, which had attracted amounts of attention due to their harmful characteristics of high toxicity, environmental persistence and potential bioaccumulation. Many chemical reductive debromination technologies have been developed for the debromination of PBDEs, including photolysis, photocatalysis, electrocatalysis, zero-valent metal reduction, chemically catalytic reduction and mechanochemical method. This review aims to provide information about the degradation thermodynamics and kinetics of PBDEs and summarize the degradation mechanisms in various systems. According to the comparative analysis, the rapid debromination to generate bromine-free products in an electron-transfer process, of which photocatalysis is a representative one, is found to be relatively difficult, because the degradation rate of PBDEs depended on the Br-rich phenyl ring with the lowest unoccupied molecular orbital (LUMO) localization. On the contrary, the complete debromination occurs easily in other systems with active hydrogen atoms as the main reactive species, such as chemically catalytic reduction systems. The review provides the knowledge on the chemical reductive technique of PBDEs, which would greatly help not only clarify the degradation mechanism but also design the more efficient system for the rapid and deep debromination of PBDEs in the future.

Comparative evaluation and prioritization of key influences on biodegradation of 2,2',4,4'-tetrabrominated diphenyl ether by bacterial isolate B. xenovorans LB400

Polybrominated diphenyl ethers (PBDEs) are a class of persistent organic pollutants being widely distributed and harmful to human health and wildlife, and the development of sustainable rehabilitation strategies including microbial degradation is of great concern. Although the increasing number of bacteria, especially the broad-spectrum and potent aerobes have been isolated for the efficient removal of PBDEs, the external influences and the corresponding influential mechanism on biodegradation are not fully understood yet. Given the wide-spectrum biodegradability of aerobic bacterial isolate, B. xenovorans LB400 for PBDEs, the dual impacts of many pivotal factors including pH, temperature, presence of dissolved organic matter (DOM) and cadmium ion etc. were comprehensively revealed on biodegradation of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47). Due to the structural resemblance and stimulation of specific enzyme activity in bacteria, the biphenyl as substrates showed the greater capacity than non-aromatic compounds in improving biodegradation. The individual adaptation to neutrality and cultivation at about 30 °C was beneficial for biodegradation since the bacterial cellular viability and enzyme activity was mostly preserved. Although it was possibly good for the induction of hormesis and favorable to enhance the permeability or bioavailability of pollutant, the exceeding increase of Cd²⁺ or DOM may not give the profitable increase of biodegradation yet for the detrimental effect. For biodegradation, the mechanistic relationship that took account of the integrative correlation with the influential factors was artfully developed using partial least square (PLS) regression technique. Relative to the most significant influence of culture time and initial concentration of BDE-47, the larger relevance of other factors primarily marked as pH and DOM was consecutively shown after the quantitative prioritization. This may not only help understand the influential mechanism but provide a prioritizing regulation strategy for biodegradation of BDE-47. The PLS-derived relationship was validated with the certain predictability in biodegradation, and could be used as an alternative to accelerate a priori evaluation of suitability or improve the feasibility of such bacteria in remediation of PBDEs in the environment.

Degradation of alkane hydrocarbons by Priestia megaterium ZS16 and sediments consortia with special reference to toxicity and oxidative stress induced by the sediments in the vicinity of an oil refinery

Petroleum hydrocarbon is a critical ecological issue with impact on ecosystems through bioaccumulation. It poses significant risks to human health. Due to the extent of alkane hydrocarbon pollution in some environments, biosurfactants are considered as a new multifunctional technology for the efficient removal of petroleum-based contaminants. To this end, Yamuna river sediments were collected at different sites in the vicinity of Mathura oil refinery, UP (India). They were analysed by atomic absorption spectrophotometry and gas chromatography-mass spectrometry (GC-MS) for heavy metals and organic pollutants. Heptadecane, nonadecane, oleic acid ester and phthalic acid were detected. In total 107 bacteria were isolated from the sediments and screened for biosurfactant production. The most efficient biosurfactant producing strain was tested for its capability to degrade hexadecane efficiently at different time intervals (0 h, 7 d, 14 d and 21 d). FT-IR analysis defined the biosurfactant as lipopeptide. 16S rRNA gene sequencing identified the bacterium as Priestia megaterium. The strain lacks resistance to common antibiotics thus making it an important candidate for remediation. The microbial consortia present in the sediments were also investigated for their capability to degrade C₁₆, C₁₇ and C₁₈ alkane hydrocarbons. By using gas chromatography-mass spectrophotometry the metabolites were identified as 1-docosanol, dodecanoic acid, 7-hexadecenal, (Z)-, hexadecanoic acid, docosanoic acid, 1-hexacosanal, 9-octadecenoic acid, 3-octanone, Z,Z-6,28-heptatriactontadien-2-one, heptacosyl pentafluoropropionate, 1,30-triacontanediol and decyl octadecyl ester. Oxidative stress in Vigna radiata L. roots was observed by using Confocal Laser Scanning Microscopy. A strong reduction in seed germination and radicle and plumule length was observed when Vigna radiata L. was treated with different concentrations of sediment extracts, possibly due to the toxic effects of the pollutants in the river sediments. Thus, this study is significant since it considers the toxicological effects of hydrocarbons and to degrade them in an environmentally friendly manner.

Congener-specificity, dioxygenation dependency and association with enzyme binding for biodegradation of polybrominated diphenyl ethers by typical aerobic bacteria: Experimental and theoretical studies

Polybrominated diphenyl ethers (PBDEs) are a group of organic pollutants that have attracted much concerns of scientific community over the ubiquitous distribution, chemical persistence and toxicological risks in the environment. Though a great number of aerobic bacteria have been isolated for the rapid removal of PBDEs, the knowledge about biodegradation characteristics and mechanism is less provided yet. Herein, the congener-specificity of aerobic biodegradation of PBDEs by typical bacteria, i.e. B. xenovorans LB400 was identified with the different biodegradation kinetics, of which the changes were largely hinged on the bromination pattern. The more bromination isomerically at ortho-sites other than meta-sites or the single bromination at one of aromatic rings might always exert the positive effect. The biodegradation of PBDEs should be thermodynamically constrained to some extent because the calculated Gibbs free energy changes of initial dioxygenation by quantum chemical method increased with the increase of bromination. Within the transition state theory, the high correlativity between the apparent biodegradation rates and Gibbs free energy changes implied the predominance and rate-limiting character of initial dioxygenation, while the regioselectivity of dioxygenation at the ortho/meta-sites was also manifested for the more negative charge population. The molecular binding with the active domain of dioxygenase BphA1 in aerobe was firstly investigated using docking approach. As significantly illustrated with the positive relationship, the higher binding affinity with BphA1 should probably signify the more rapid biodegradation. Besides the edge-on π-π stacking of PBDEs with F227 or Y277 and π-cation formulation with histidines (H233, H239) in BphA1, the reticular hydrophobic contacts appeared as the major force to underpin the high binding affinity and rapid biodegradation of PBDEs. Overall, the experimental and theoretical results would not only help understand the aerobic biodegradation mechanism, but facilitate enhancing applicability or strategy development of engineering bacteria for bioremediation of PBDEs in the environment.

Manure- and straw-derived biochars reduce the ecological risk of PBDE and promote nitrogen cycling by shaping microbiomes in PBDE-contaminated soil

Pyrolysis of agricultural waste into biochar for soil remediation is a useful solid waste management strategy. However, it is still unclear how different agricultural feedstocks affect the properties of biochars and their effectiveness in remediation of PBDE-contaminated soil. In this study, we systematically investigated dynamic alterations of soil properties, microbial communities, and PBDE dissipation and bioavailability induced by the application of biochars from manure (MBC) and straw (SBC) to PBDE-contaminated soil. The results showed that soil properties, microbial community structure, and diversity changed differently with the incorporation of the two biochars. MBC had a larger surface area (17.4 m²/g) and a higher nutrient content (45.1% ash content), making it more suitable for use as a soil additive to improve soil quality and nutrient conditions, as well as to stimulate microbial growth. SBC showed higher adsorption capacity for 2,2',4,4'-Tetrabromodiphenyl Ether (BDE-47) (26.73 ± 0.65 mg/g), thus lowering the bioavailability and ecological risk of BDE-47 in soil. BDE-47 was stepwise debrominated into lower brominated PBDE by PBDE-degrading bacteria. MBC accelerated the debromination of BDE-47 (10.1%) by promoting PBDE-degrading microorganisms, while this was inhibited by SBC (3.5%) due to strong adsorption of BDE-47. In addition, we found that both types of biochar favored Nitrospirae bacteria and promoted N cycling. Overall, biochars from manure and straw can positively shape soil microbial communities differently by altering soil properties, soil fertility and nutrient availability, and the fate and the effects of contaminants, which ultimately led to a difference in the potential of biochars for their use in soil remediation.

Understanding the role of biochar in affecting BDE-47 biodegradation by Pseudomonas plecoglossicida: An integrated analysis using chemical, biological, and metabolomic approaches

Biochar-assisted microbial degradation technology is considered as an important strategy to eliminate organic pollutants, but the mechanism of biochar in affecting biodegradation has not been systematically studied. To address this knowledge gap, the effect of various biochars on biodegradation of different initial concentrations of BDE-47 by Pseudomonas plecoglossicida was investigated. The results showed that biochar exhibited significant promotion to the biodegradation of BDE-47, especially at concentrations of BDE-47 above 100 μg/L. The promotion effect was negatively influenced by the aromaticity and micropore volume of biochar. Biochar alleviated the cytotoxicity of BDE-47 to P. plecoglossicida and promoted cell proliferation based on toxicity assays. Additionally, biochar acted as shelter and stimulated the secretion of extracellular polymeric substances, which might support P. plecoglossicida to struggle with extreme conditions. Metabolomic analysis indicated that biochar resulted in upregulation expression of 38 metabolites in P. plecoglossicida. These upregulated metabolites were mainly related to glyoxylate and dicarboxylate metabolism, citrate cycle, and serial amino acid metabolism, suggesting that biochar could improve the BDE-47 biodegradation via enhancing oxidative metabolism and energy supply of the bacterial cells. This work elucidates how biochar can affect BDE-47 biodegradation and provides insights for the application prospect of biochar-assisted microbial degradation technology in the environment.

The environmental distribution and removal of emerging pollutants, highlighting the importance of using microbes as a potential degrader: A review

Emerging pollutants (EPs) create a worldwide concern owing to their low concentration and severe toxicity to the receptors. The prominent emerging pollutants categories as pharmaceutical and personal care product, plasticizer, surfactants, and persistent organic pollutants. Typically, EPs are widely disseminated in the aquatic ecosystem and capable of perturbing the physiology of water bodies as well as humans. The primary sources of EPs in the environment include anthropogenic release, atmospheric deposition, untreated or substandard treated wastewater, and extreme weather events. Intensive research has been done covering the environmental distribution, ecological disturbance, fate, and removal of EPs in the past decades. However, a systematic review on the distribution of EPs in the engineered and natural aquatic environment and the degradation of different EPs by using anaerobic sludge, aerobic bacteria, and isolated strains are limited. This review article aims to highlight the importance, application, and future perceptions of using different microbes to degrade EPs. Overall, this review article illustrates the superiority of using non-cultivable and cultivable microbes to degrade the EPs as an eco-friendly approach. Practically, the outcomes of this review paper will build up the knowledge base solutions to remove EPs from the wastewater.

A biogenic microbial biosurfactin that degrades difenoconazole fungicide with potential antimicrobial and oil displacement properties

Surfactin is a bacterial lipopeptide and an influential biosurfactant mainly known for excellent surfactant ability. The amphiphilic nature of surfactin helps it to sustain under hydrophobic and hydrophilic conditions. In this investigation, a bacterium strain (BTKU3) that produces biosurfactant were isolated from oil-contaminated soil. Based on the blue agar plate (Bap) assay, the BTKU3 strain was found to be promising for biosurfactant production. This strain was later identified as a Lysinibacillus sp. by 16S rRNA sequencing. The characteristics of extracted bacterial surfactin were evidenced by FTIR with the presence of amine, C-H, CO, CC, esters, thiocarbonyl and asymmetric aliphatic C-H stretch molecular structural groups. Further, the extracted bacterial biosurfactant material was subjected to Liquid Chromatography-Mass Spectroscopy (LCMS), and it was identified and confirmed as surfactin with an elution time of 3.1 min and m/z value of 1034. The emulsification and oil displacement tests further proved the surfactin ability with 83% of coconut oil emulsion index and 80 % oil displacement ability with diesel, respectively. Lysinibacillus sp. BTKU3 strain also proved its efficacy in the degradation of difenoconazole by utilizing a capacity of 9.1 μg ml^-1. Thus, it is inferred that the Lysinibacillus sp. BTKU3 strain plays a significant role in the production of surfactin, which positively acts as an antimicrobial agent and reduces contaminants in polluted sites.

Enhanced biodegradation of hydrophobic organic pollutants by the bacterial consortium: Impact of enzymes and biosurfactants

Hydrocarbons and their derivative compounds are recalcitrant in nature and causing adverse impacts to the environment and are classified as important pollutants. Removal of these pollutants from the atmosphere is a challenging process. Hydrophobic organic pollutants (HOPs) including crude oil, diesel, dotriacontane (C₃₂), and tetracontane (C₄₀) are subjected to the biodegradation study by using a bacterial consortium consist of Bacillus subtilis, Pseudomonas stutzeri, and Acinetobacter baumannii. The impact of pH and temperature on the biodegradation process was monitored. During the HOPs biodegradation, the impact of hydrocarbon-degrading extracellular enzymes such as alcohol dehydrogenase, alkane hydroxylase, and lipase was examined, and found average activity about 47.2, 44.3, and 51.8 μmol/mg^-1, respectively. Additionally, other enzymes such as catechol 1,2 dioxygenase and catechol 2,3 dioxygenase were found as 118 and 112 μmol/mg^-1 Enzyme as an average range in all the HOPs degradation, respectively. Also, the impact of the extracellular polymeric substance and proteins were elucidated during the biodegradation of HOPs with the average range of 116.90, 54.98 mg/L^-1 respectively. The impact of biosurfactants on the degradation of different types of HOPs is elucidated. Very slight changes in the pH were also noticed during the biodegradation study. Biodegradation efficiency was calculated as 90, 84, 76, and 72% for crude oil, diesel, C_32, and C₄₀, respectively. Changes in the major functional groups (CH, C-O-C, CO, =CH₂, CH₂, CH₃) were confirmed by FTIR analysis and intermediated metabolites were identified by GCMS analysis. The surface-active molecules along with the enzymes played a crucial role in the biodegradation process.

Prompting the FDH/Hases-based electron transfers during Pt(IV) reduction mediated by bio-Pd(0)

Due to the excellent hydrogen affinity and high conductivity, palladium nanoparticles (Pd NPs) were considered as a potential strategy to regulate bacterial electron transfer and energy metabolism. Herein, Citrobacter freundii JH, capable of in-situ biosynthesizing Pd(0) NPs, was employed to promote Pt(IV) reduction. The results showed that the Pt(IV) reduction to Pt(II) was accomplished mainly via the flavins-mediated extracellular electron transfer (EET) process, while Pt(II) reduction to Pt(0) was limit step, and proceeded via two intracellular respiratory chains, including FDH/Hases-based short chain (S-chain) and typical CoQ-involved long respiratory chain (L-chain). Noteworthily, the incorporation of Pd(0) NPs mainly diverted the electrons to S-chain (as high as 71.7%-73.4%) by improving the hydrogenases (Hases) activity. Furthermore, Pd(0) NPs could stimulate the secreting of flavins and the combination between flavins and cytochrome c (c-Cyt), which converted electron transfer manner of L-chain. Additionally, Pd(0) NPs might also act as alternative proton channels to improve the energy metabolism. These findings provided significant insights into the promotion by Pd(0) NPs in terms of electron generation, electron consumption and proton translocation.

Mechanistic insight into hydroxylation of 2,2',4,4'-tetrabromodiphenyl ether during biodegradation by typical aerobic bacteria: Experimental and computational studies

Polybrominated diphenyl ethers (PBDEs) are a group of persistent pollutants in the environment. Though aerobic biodegradation of PBDEs have been extensively studied, the involved hydroxylation mechanism decisive for whole biotransformation is not clear yet. During the effective biodegradation of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) by B. xenovorans LB400, the depletion of endogenous ∙OH by scavenger could bring about the significant decrease of biodegradation efficiency whereas ·O₂^- was nearly not influential. Given the importance of ∙OH in hydroxylation, the reaction mechanisms along major pathways of electrophilic addition and hydrogen abstraction were theoretically examined by density functional theory (DFT). For the less demand of activation energy, the relative preference of electrophilic addition was shown at aromatic C3-site. When the secondary reaction was considered after addition at C4-site, the barrierless association of ∙OH at C3-site and deprotonation by H₂O was validated as the energetically-favorable pathway that may cause dihydroxylation of BDE-47 into 3,4-dihydroxyl-BDE-17. The electrophilic addition followed by seconary barrierless trans-association of ∙OH and then dehydration seemed favorable for monohydroxylation as regards energetic barrier merely up to 194.01 kJ mol^-1, while the hydrogen abstraction by ∙OH from C5-site was more privileged actually. The theoretical insights would help well understand the hydroxylation mechanism of PBDEs by aerobes.

The inhibitory mechanism of natural soil colloids on the biodegradation of polychlorinated biphenyls by a degrading bacterium

In spite of extensive studies of soil model components, the role of natural soil colloids in the biodegradation of organic pollutants remain poorly understood. Accordingly, the present study selected Mollisol colloids (MCs) and Ultisol colloids (UCs) to investigate their effects on the biodegradation of 3, 3', 4, 4'-tetrachlorobiphenyl (PCB77) by Bradyrhizobium diazoefficiens USDA 110. Results demonstrated that both natural soil colloids significantly decreased the biodegradation of PCB77, which partly resulted from the significant decrease in the bioaccessibility of PCB77. Furthermore, the activity of Bradyrhizobium diazoefficiens USDA 110 was remarkably inhibited under the exposure to the two types of soil colloids, which was mainly ascribed to the inhibition of cell reproduction but not the lethal effect of reactive oxygen species. The calculated results from Ex-DLVO theory further indicated that the repulsion between UCs and biodegrading bacteria retarded the effective contact of cells with adsorbed PCB77 from UCs, resulting in the decline of the rate of cell reproduction. In general, the inhibition of MCs was limited to PCB77 bioaccessibility, whereas the negative effect of UCs was controlled by PCB77 bioaccessibility and the effective contact of cells with colloids. This study could provide implication for the enhancement of microbial remediation in contaminated soil.

Nicosulfuron inhibits atrazine biodegradation by Arthrobacter sp. DNS10:Influencing mechanisms insight from bacteria viability, gene transcription and reactive oxygen species production

Nicosulfuron is a sulfonylurea family herbicide which is commonly applied together with the triazine herbicide atrazine in agricultural practice. However, whether nicosulfuron can influence the biodegradation of atrazine is unclear. Therefore, the influence of nicosulfuron on atrazine removal as well as on cell viability and transcription of atrazine chlorohydrolase gene (trzN) in Arthrobacter sp. DNS10 was investigated in this study. Our results demonstrated that 76.0% of atrazine was degraded in the absence of nicosulfuron after 48h of culture, whereas 63.9, 49.1 and 42.6% was degraded in the presence of 1, 5, and 10 mg/L of nicosulfuron, respectively. Nicosulfuron also induced an increase in the level of intracellular reactive oxygen species (ROS), thereby damaging the cell membrane integrity and inhibiting the growth of the strain DNS10. Flow cytometry analysis revealed that the cell viability of strain DNS10 decreased with an increase in nicosulfuron concentration. The transcription of trzN in strain DNS10 exposed to the three described levels of nicosulfuron was 0.99, 0.72 and 0.52 times, respectively, that without nicosulfuron. In brief, nicosulfuron could inhibit atrazine removal efficiency by strain DNS10 by inducing the over-production of ROS which ultimately enhances the population of membrane-damaged cells, as well as reducing cell viability and trzN transcription. The outcomes of the present study provide new insights into the mechanism of nicosulfuron inhibition on atrazine biodegradation by strain DNS10.

Investigation of biosurfactants produced by three indigenous bacterial strains, their growth kinetics and their anthracene and fluorene tolerance

The study explored the polycyclic aromatic hydrocarbon tolerance of indigenous biosurfactant producing microorganisms. Three bacterial species were isolated from crude oil contaminated sites of Haldia, West Bengal. The three species were screened for biosurfactant production and identified by 16S rRNA sequencing as Brevundimonas sp. IITISM 11, Pseudomonas sp. IITISM 19 and Pseudomonas sp. IITISM 24. The strains showed emulsification activities of 51%, 57% and 63%, respectively. The purified biosurfactants were characterised using FT-IR, GC-MS and NMR spectroscopy and found to have structural similarities to glycolipopeptides, cyclic lipopeptides and glycolipids. The biosurfactants produced were found to be stable under a wide range of temperature (0-100 °C), pH (4-12) and salinity (up to 20% NaCl). Moreover, the strains displayed tolerance to high concentrations (275 mg/L) of anthracene and fluorene and showed a good amount of cell surface hydrophobicity with different hydrocarbons. The study reports the production and characterisation of biosurfactant by Brevundimonas sp. for the first time. Additionally, the kinetic parameters of the bacterial strains grown on up to 300 mg/L concentration of anthracene and fluorene, ranged between 0.0131 and 0.0156 µ_max (h^-1), while the K_s(mg/L) ranged between 59.28 and 102.66 for Monod's Model. For Haldane-Andrew's model, µ_max (h^-1) varied between 0.0168 and 0.0198. The inhibition constant was highest for Pseudomonas sp. IITISM 19 on anthracene and Brevundimonas sp. IITISM 11 on fluorene. The findings of the study suggest that indigenous biosurfactant producing strains have tolerance to high PAH concentrations and can be exploited for bioremediation purposes.