Insights to perfluorooctanoic acid adsorption micro-mechanism over Fe-based metal organic frameworks: Combining computational calculation with response surface methodology

Innovative techniques for combating a common enemy forever chemicals: A comprehensive approach to mitigating per- and polyfluoroalkyl substances (PFAS) contamination

The pervasive presence of per and polyfluoroalkyl substances (PFAS), commonly referred to as "forever chemicals," in water systems poses a significant threat to both the environment and public health. PFAS are persistent organic pollutants that are incredibly resistant to degradation and have a tendency to accumulate in the environment, resulting in long-term contamination issues. This comprehensive review delves into the primary impacts of PFAS on both the environment and human health while also delving into advanced techniques aimed at addressing these concerns. The focus is on exploring the efficacy, practicality, and sustainability of these methods. The review outlines several key methods, such as advanced oxidation processes, novel materials adsorption, bioremediation, membrane filtration, and in-situ chemical oxidation, and evaluates their effectiveness in addressing PFAS contamination. By conducting a comparative analysis of these techniques, the study aims to provide a thorough understanding of current PFAS remediation technologies, as well as offer insights into integrated approaches for managing these persistent pollutants effectively. While acknowledging the high efficiency of adsorption and membrane filtration in reducing persistent organic pollutants due to their relatively low cost, versatility, and wide applicability, the review suggests that the integration of these methods could result in an overall enhancement of removal performance. Additionally, the study emphasizes the need for researcher attention in key areas and underscores the necessity of collaboration between researchers, industry, and regulatory authorities to address this complex challenge.

β-Cyclodextrin/carbon dots-grafted cellulose nanofibrils hydrogel for enhanced adsorption and fluorescence detection of levofloxacin

In this study, a novel hydrogel, β-cyclodextrin/carbon dots-grafted cellulose nanofibrils hydrogel (βCCH), was fabricated for removal and fluorescence determination of levofloxacin (LEV). A comprehensive analysis was performed to characterize its physicochemical properties. Batch adsorption experiments were conducted, revealing that βCCH reached a maximum adsorption capacity of 1376.9 mg/g, consistent with both Langmuir and pseudo-second-order models, suggesting that the adsorption process of LEV on βCCH was primarily driven by chemical adsorption. The removal efficiency of βCCH was 99.2 % under the fixed conditions (pH: 6, initial concentration: 20 mg/L, contact time: 300 min, temperature: 25 °C). The removal efficiency of βCCH for LEV still achieved 97.3 % after five adsorption-desorption cycles. By using βCCH as a fluorescent probe for LEV, a fast and sensitive method was established with linear ranges of 1-120 mg/L and 0.2-1.0 μg/L and a limit of detection (LOD) as low as 0.09 μg/L. The viability of βCCH was estimated based on the economic analysis of the synthesis process and the removal of LEV, demonstrating that βCCH was more cost-effective than commercial activated carbon. This study provides a novel approach for preparing a promising antibiotic detection and adsorption material with the advantages of stability, and cost-effectiveness.

Effective removal of perfluorooctanoic acid from water using PVA@UiO-66-NH2/GO composite materials via adsorption

This study introduces an innovative approach using highly efficient nanocomposite materials to effectively remove PFAS from water, demonstrating remarkable adsorption capabilities. The nanocomposite was synthesized by integrating a zirconium-based metal-organic framework (MOF) called UiO-66 with graphene oxide (GO) within a polyvinyl alcohol (PVA) matrix. The resulting PVA@UiO-66/GO material features flower-like UiO-66 MOF crystals embedded in the PVA and GO matrix. Various kinetic models were applied to determine the rate constants and adsorption capacities, with the Langmuir isotherm indicating an adsorption capacity of 9.904 mg/g. Thermodynamic analysis confirmed the process's spontaneity and exothermic nature. The UiO-66-NH2/GO/PVA composite also demonstrated high reusability, maintaining substantial PFOA removal efficiency across multiple cycles, with optimal reduction occurring at approximately pH 5. Overall, the PVA@UiO-66/GO composites offer an effective, sustainable, and environmentally friendly solution for PFAS removal in water purification.

Zirconium-Based Metal-Organic Frameworks with Free Hydroxy Groups for Enhanced Perfluorooctanoic Acid Uptake in Water

Perfluorooctanoic acid (PFOA) is a highly recalcitrant organic pollutant, and its bioaccumulation severely endangers human health. While various methods are developed for PFOA removal, the targeted design of adsorbents with high efficiency and reusability remains largely unexplored. Here the rational design and synthesis of two novel zirconium-based metal‒organic frameworks (MOFs) bearing free ortho-hydroxy sites, namely noninterpenetrated PCN-1001 and twofold interpenetrated PCN-1002, are presented. Single crystal analysis of the pure ligand reveals that intramolecular hydrogen bonding plays a pivotal role in directing the formation of MOFs with free hydroxy groups. Furthermore, the transformation from PCN-1001 to PCN-1002 is realized. Compared to PCN-1001, PCN-1002 displays higher chemical stability due to interpenetration, thereby demonstrating an exceptional PFOA adsorption capacity of up to 632 mg g-1 (1.53 mmol g-1), which is comparable to the reported record values. Moreover, PCN-1002 shows rapid kinetics, high selectivity, and long-life cycles in PFOA removal tests. Solid-state nuclear magnetic resonance results and density functional theory calculations reveal that multiple hydrogen bonds between the free ortho-hydroxy sites and PFOA, along with Lewis acid-base interaction, work collaboratively to enhance PFOA adsorption.

Optimization of rare earth magnet recovery processes using oxalic acid in precipitation stripping: Insights from experimental investigation and statistical analysis

Recycling the valuable metals found in spent permanent magnets (REPMs) poses a significant global challenge for the future. This study examines the efficiency of back extraction of rare earth elements (REEs) by oxalic acid solution from di-(2-ethylhexyl) phosphoric acid (D2EHPA) in recycling REPMs. To evaluate the efficiency of this process, several experiments were carried out using designed BOX-Behnken methodology to investigate the effects of various operational and chemical parameters, including stripping solution to loaded organic phase volume ratio (in the range of 1.0-2.0), oxalic acid concentration (ranging from 0.25 to 0.75 M), the stirring rate (ranged between 150 and 350 rpm), and stripping time (ranging from 15 to 45 min) on the REEs recovery and the purity of final production. Analysis of variance was applied to rigorously examine the results statistically. The results showed that more than 85 % of light and 80 % of heavy REEs can be recovered under optimal conditions. Moreover, the final product contained 43.5 % REEs and approximately 0.1 % iron. The stripping experiment using phosphoric acid as the reagent demonstrated ∼57 % light and ∼4 % heavy REEs recovery. Additionally, the recyclability of the organic phase showed its effective reuse for up to four cycles. This study underscores significant progress in the selective recovery of rare earth elements through a relatively straightforward process consuming mild reagents.

Adsorptive removal of perfluorooctanoic acid from aqueous matrices using peanut husk-derived magnetic biochar: Statistical and artificial intelligence approaches, kinetics, isotherm, and thermodynamics

Removal of perfluorooctanoic acid (PFOA) from water matrices is crucial owing to its pervasiveness and adverse ecological and human health effects. This study investigates the adsorptive removal of PFOA using magnetic biochar (MBC) derived from FeCl3-treated peanut husk at different temperatures (300, 600, and 900 °C). Preliminary experiments demonstrated that MBC600 exhibited superior performance, with its characterization confirming the presence of γ-Fe2O3. However, efficient PFOA removal from water matrices depends on determining the optimum combination of inputs in the treatment approaches. Therefore, optimization and predictive modeling of the PFOA adsorption were investigated using the response surface methodology (RSM) and the artificial intelligence (AI) models, respectively. The central composite design (CCD) of RSM was employed as the design matrix. Further, three AI models, viz. artificial neural network (ANN), support vector machine (SVM), and adaptive neuro-fuzzy inference system (ANFIS) were selected to predict PFOA adsorption. The RSM-CCD model applied to optimize three input process parameters, namely, adsorbent dose (100-400 mg/L), pH (3-10), and contact time (20-60 min), showed a statistically significant (p < 0.05) effect on PFOA removal. Maximum PFOA removal of about 98.3% was attained at the optimized conditions: adsorbent dose: 400 mg/L, pH: 3.4, and contact time: 60 min. Non-linear analysis showed PFOA adsorption was best fitted by pseudo-second-order kinetics (R2 = 0.9997). PFOA adsorption followed Freundlich isotherm (R2 = 0.9951) with a maximum adsorption capacity of ∼307 mg/g. Thermodynamics and spectroscopic analyses revealed that PFOA adsorption is a spontaneous, exothermic, and physical phenomenon, with electrostatic interaction, hydrophobic interaction, and hydrogen bonding governing the process. A comparative analysis of the statistical and AI models for PFOA adsorption demonstrated high R2 (>0.99) for RSM-CCD, ANN, and ANFIS. This research demonstrates the applicability of the statistical and AI models for efficient prediction of PFOA adsorption from water matrices using MBC (MBC600).

Roles of varying carbon chains and functional groups of legacy and emerging per-/polyfluoroalkyl substances in adsorption on metal-organic framework: Insights into mechanism and adsorption prediction

Metal-organic frameworks (MOFs) are promising adsorbents for legacy per-/polyfluoroalkyl substances (PFASs), but they are being replaced by emerging PFASs. The effects of varying carbon chains and functional groups of emerging PFASs on their adsorption behavior on MOFs require attention. This study systematically revealed the structure-adsorption relationships and interaction mechanisms of legacy and emerging PFASs on a typical MOF MIL-101(Cr). It also presented an approach reflecting the average electronegativity of PFAS moieties for adsorption prediction. We demonstrated that short-chain or sulfonate PFASs showed higher adsorption capacities (μmol/g) on MIL-101(Cr) than their long-chain or carboxylate counterparts, respectively. Compared with linear PFASs, their branched isomers were found to exhibit a higher adsorption potential on MIL-101(Cr). In addition, the introduction of ether bond into PFAS molecule (e.g., hexafluoropropylene oxide dimeric acid, GenX) increased the adsorption capacity, while the replacement of CF2 moieties in PFAS molecule with CH2 moieties (e.g., 6:2 fluorotelomer sulfonate, 6:2 FTS) caused a decrease in adsorption. Divalent ions (such as Ca2+ and SO42-) and solution pH have a greater effect on the adsorption of PFASs containing ether bonds or more CF2 moieties. PFAS adsorption on MIL-101(Cr) was governed by electrostatic interaction, complexation, hydrogen bonding, π-CF interaction, and π-anion interaction as well as steric effects, which were associated with the molecular electronegativity and chain length of each PFAS. The average electronegativity of individual moieties (named Me) for each PFAS was estimated and found to show a significantly positive correlation with the corresponding adsorption capacity on MIL-101(Cr). The removal rates of major PFASs in contaminated groundwater by MIL-101(Cr) were also correlated with the corresponding Me values. These findings will assist with the adsorption prediction for a wide range of PFASs and contribute to tailoring efficient MOF materials.

Simultaneous size and defect control of metal-organic framework by deep eutectic solvent for efficient perfluoroalkyl substances adsorption: Delving into mechanism

This study reports an environment-friendly protocol to prepare a metal-organic framework (MOF) with simultaneously controlled particle size and open metal site for adsorption removal of perfluoroalkyl substances (PFASs). The successful preparation of UiO-66 with defect and crystal size modulation was achieved using a green and straightforward method, adjusting the components and molar ratios of ammonium salt/glycolic acid deep eutectic solvents (DESs). The corresponding modulation mechanism primarily relied on the combined regulation of the deprotonation and competitive coordination abilities of the eutectic solvent components. The adsorption process was thoroughly examined using spectral analyses, adsorption behavior profiling, and ab initio molecular dynamics simulations. The results revealed that PFAS adsorption is driven by combined capturing effects, such as CF-π, acid/base coordination, C-F⋯Zr, hydrogen bonding, and hydrophobic interactions. Our findings were not thus that the smaller the crystal size of MOF and the higher the defect concentration in the material, the better the PFAS adsorption performance. The result demonstrated the combined effect of these adsorbent features on PFAS mixtures. Furthermore, they revealed unique differences in sorption properties between these targets with different carbon chain lengths. Extensive defects in DES-based UiO-66 led to larger pores, increasing the availability of many adsorption sites and aiding in PFAS adsorption and diffusion. Nevertheless, the surplus of larger pores in the substance increased the competitive adsorption, reducing the total quantity of PFASs absorbed. Furthermore, various interactions and a less restrictive configuration increased the contact of functional groups with adsorbates, substantially enhancing the adsorption. This study investigates the basic questions about how PFAS molecules are adsorbed on DES-based MOFs and the relationship among the structure, properties, and performance to improve the efficiency of this novel adsorbent.

Improved microalgae carbon fixation and microplastic sedimentation in the lake through in silico method

The impact of microplastics in lake water environments on microalgae carbon fixation and microplastic sedimentation has attracted global attention. The molecular dynamic simulation method was used to design microplastic additive proportioning schemes for improving microalgae carbon fixation and microplastic sedimentation. Results showed that the harm of microplastics can be effectively alleviated by adjusting the proportioning scheme of plastic additives. Besides, the decabromodiphenyl oxide (DBDPO) was identified as the main additive that affect the microalgae carbon fixation and microplastic sedimentation. Thus, a molecular modification based on CiteSpace visual analysis was firstly used and 12 DBDPO derivatives were designed. After the screening, DBDPO-2 and DBDPO-5 became the environmentally friendly DBDPO alternatives, with the highest microalgae carbon fixation and microplastic sedimentation ability enhancement of over 25 %. Compared to DBDPO, DBDPO derivatives were found easier to stimulate the adsorption and binding ability of surrounding hotspot amino acids to CO2 and ribulose-5-phosphate, increasing the solvent-accessible surface area of microplastics, thus improving the microalgae carbon fixation and microplastic sedimentation ability. This study provides theoretical support for simultaneously promoting the microalgae carbon fixation and microplastic sedimentation in the lake water environment and provides scientific basis for the protection and sustainable development of lake water ecosystem.

Adsorption of perfluoroalkyl substances on deep eutectic solvent-based amorphous metal-organic framework: Structure and mechanism

Perfluoroalkyl substances (PFASs) are a class of emerging organic pollutants characterized by high toxicity, environmental persistence, and widespread detection in water sources. The removal of PFASs from water is a matter of global concern, given their detrimental impact on both the environment and public health. Many commonly used PFAS adsorbents demonstrate limited adsorption capacities and/or slow adsorption kinetics. Therefore, there is an urgent need for the development of efficient adsorbents. For the first time, this work systematically investigated the performance of a deep eutectic solvent (DES)-based amorphous metal-organic framework (MOF) for the adsorption of PFASs with different carbon-chain lengths under the state of the mixture in aquatic environments. The adsorption mechanism was probed by a suite of adsorption kinetics studies, adsorption isotherm profiling, spectral characterization, and ab initio molecular dynamics (AIMD) simulations, revealing that PFAS adsorption is driven by synergistic capturing effects including acid/base coordination, CF-π (carbon-fluorine-π), hydrogen bonding, and hydrophobic interactions. Furthermore, the adsorption processes of short-chain and long-chain targets were found to involve different rate-controlling steps and interaction sites. Hydrophobic interactions facilitated the swift arrival of long-chain PFASs at the coordinatively interacting sites between carboxyl termini and Lewis acid Zr unsaturated sites, thanks to their lower reaction barriers. On the other hand, the adsorption of short-chain PFASs primarily relied on a Zr hydroxyl-based ligand exchange force, which would take place at Brønsted acid sites. The existence of massive structural disorder in amorphous UiO-66 led to the development of larger pores, thus improving the accessibility of abundant adsorption sites and facilitating adsorption and diffusion. The presence of multiple types of interactions and flexible structure in defect-rich amorphous UiO-66 significantly increased the exposure of functional groups to the adsorbates. Additionally, this material possessed outstanding regeneration efficiency and outperformed other MOF-based adsorbents with high affinity for targets. It enhances our understanding of the adsorption performances and mechanisms of amorphous materials toward PFASs, thereby paving the way for designing more efficient PFAS adsorbents.

Fluorine-functionalized magnetic amino microporous organic network for enrichment of perfluoroalkyl substances

Perfluoroalkyl substances (PFAS) are persistent organic pollutants that pose significant risks to human health and the environment. Efficient and selective enrichment of these compounds was crucial for their accurate detection and quantification in complex matrices. Herein, we report a novel magnetic solid-phase extraction (MSPE) method using fluorine-functionalized magnetic amino-microporous organic network (Fe3O4@MONNH2@F7) adsorbent for the efficient enrichment of PFAS from aqueous samples. The core-shell Fe3O4@MONNH2@F7 nanosphere was synthesized, featuring magnetic Fe3O4 nanoparticles as the core and a porous amino-functionalized MONs coating as the shell, which was further modified by fluorination. The synthesized adsorbent material exhibited high specific surface area, hydrophobicity, and abundant fluorine groups, facilitating efficient and selective adsorption of PFAS via electrostatic attraction, hydrophobic-hydrophobic interactions, fluorine-fluorine interactions, π-CF interactions and hydrogen bonding. Furthermore, the MSPE method coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) allowed for the rapid, sensitive, and accurate determination of ultra-trace PFAS in real water samples, human serum, and human follicular fluid. Under optimal conditions, the established MSPE method demonstrated a linear range (2 to 2000 ng L-1), with a correlation coefficient exceeding 0.9977, low limits of detection ranging from 0.54 to 1.47 ng L-1, with a relative standard deviation (RSD) < 9.1%. Additionally, the method showed excellent performance in complex real samples (recovery ratio of 81.7 to 121.6 %). The adsorption mechanism was investigated through kinetic, isotherm, and molecular simulation studies, revealing that the introduction of fluorine groups enhanced the hydrophobic interaction and fluorine-fluorine attraction between the adsorbent and PFAS. This work provides a proof-of-concept strategy for designing adsorbent materials with high efficiency and selectivity by post-modification, which has great potential for the detection and analysis of PFAS in complex samples.

Exceptionally High Perfluorooctanoic Acid Uptake in Water by a Zirconium-Based Metal-Organic Framework through Synergistic Chemical and Physical Adsorption

Perfluorooctanoic acid (PFOA) is an environmental contaminant ubiquitous in water resources, which as a xenobiotic and carcinogenic agent, severely endangers human health. The development of techniques for its efficient removal is therefore highly sought after. Herein, we demonstrate an unprecedented zirconium-based MOF (PCN-999) possessing Zr6 and biformate-bridged (Zr6)2 clusters simultaneously, which exhibits an exceptional PFOA uptake of 1089 mg/g (2.63 mmol/g), representing a ca. 50% increase over the previous record for MOFs. Single-crystal X-ray diffraction studies and computational analysis revealed that the (Zr6)2 clusters offer additional open coordination sites for hosting PFOA. The coordinated PFOAs further enhance the interaction between coordinated and free PFOAs for physical adsorption, boosting the adsorption capacity to an unparalleled high standard. Our findings represent a major step forward in the fundamental understanding of the MOF-based PFOA removal mechanism, paving the way toward the rational design of next-generation adsorbents for per- and polyfluoroalkyl substance (PFAS) removal.

Tailoring the Coordination Environment of Fe/Zn-BDC to Boost Peroxidase-like Activity for Highly Selective Detection of PFOS

Perfluorooctanesulfonic acid potassium salt (PFOS) residues in ecosystems over long periods are of increasing concern and require a selective and stable optical probe for monitoring. Herein, two functional groups (-F and -NH2) with opposite electronic modulation ability were introduced into Fe/Zn-BDC (denoted as Fe/Zn-BDC-F4 and Fe/Zn-BDC-NH2, respectively) to tailor the coordination environment of the Fe metal center, further regulating the nanozyme activity efficiently. Notably, the peroxidase-like activity is related to the coordination environment of the nanozymes and obeys the following order Fe/Zn-BDC-F4 > Fe/Zn-BDC > Fe/Zn-BDC-NH2. Based on the excellent peroxidase-like activity of Fe/Zn-BDC-F4 and the characteristics of being rich in F atoms, a rapid, selective, and visible colorimetric method was developed for detecting PFOS with a detection limit of 100 nM. The detection mechanism was attributed to various interaction forces between Fe/Zn-BDC-F4 and PFOS, including electrostatic interactions, Fe-S interactions, Fe-F bonds, and halogen bonds. This work not only offers new insights into the atomic-scale rational design of highly active nanozymes but also presents a novel approach to detecting PFOS in environmental samples.

Emergence of per- and poly-fluoroalkyl substances (PFAS) and advances in the remediation strategies

A group of fluorinated organic molecules known as per- and poly-fluoroalkyl substances (PFAS) have been commonly produced and circulated in the environment. PFAS, owing to multiple strong CF bonds, exhibit exceptional stability and possess a high level of resistance against biological or chemical degradation. Recently, PFAS have been identified to cause numerous hazardous effects on the biotic ecosystem. As a result, extensive efforts have been made in recent years to develop effective methods to remove PFAS. Adsorption, filtration, heat treatment, chemical oxidation/reduction, and soil washing are a few of the physicochemical techniques that have shown their ability to remove PFAS from contaminated matrixes. However these methods also carry significant drawbacks, including the fact that they are expensive, energy-intensive, unsuitable for in-situ treatment, and requirement to be carried under dormant conditions. The metabolic products released upon PFAS degradation are largely unknown, despite the fact that thermal disintegration methods are widely used. In contrast to physical and chemical methods, biological degradation of PFAS has been regarded as efficient method. However, PFAS are difficult to instantly and completely metabolize through biological methods due to the limitations of biocatalytic mechanisms. Nevertheless, cost, easy-to-operate and environmentally safe are some of the advantages over its counterpart. The present review comprehensively discusses the occurrence of PFAS, the state-of-the science of remediation technologies and approaches applied, and the remediation challenges. The article also focuses on the future research directions toward the development of effective methods for PFAS-contaminated site in-situ treatment.

Enhanced piezoelectric catalysis of BaTiO3 by ZVAl for mechanochemical defluorination of PFOA: Promotion of electron transfer

Mechanochemical (MC) destruction of pollutants is effective; however, the emerging electron transfer mechanism is ambiguous owing to a lack of systematic evaluation. Therefore, this study aims to evaluate the contribution of electrons to perfluorooctanoic acid (PFOA) defluorination during MC process. A synergistic effect was obtained by activating BaTiO3 to generate piezoelectrons and applying zero-valence aluminum (ZVAl) to facilitate electron transfer, with 95.66% PFOA defluorination and reaction time decreasing from 6 h to 3 h. The mechanism of piezoelectric catalysis of the BaTiO3/ZVAl system was further investigated through kinetic analyses and intersystem comparisons. The major contribution of piezo-excited electrons was revealed through probe detection and quantitative determination. A positive correlation between electron generation and PFOA defluorination was ascertained, and the calculation of the electron utilization ratio revealed an electron transfer mechanism. The detached fluorides were confirmed to be bonded directly to the additives. Furthermore, PFOA decomposition was identified as a cyclical process with constant dissociation of the CF2 groups.

Substitution and Orientation Effects on the Crystallinity and PFAS Adsorption of Olefin-Linked 2D COFs

Solid phase adsorbents with high removal affinity for per- and polyfluoroalkyl substances (PFAS) in aqueous environments are sought. We report the synthesis and investigation of COF-I, a new covalent organic framework (COF) with a good affinity for PFAS adsorption. COF-I was synthesized by the condensation reaction between 2,4,6-trimethyl-1,3,5-triazine and 2,3-dimethoxyterephthaldehyde and fully characterized. In addition to the high crystallinity and surface area, COF-I showed high hydrolytic and thermal stability. Further, we converted its hydrophobic surface to a hydrophilic surface by converting the ortho-methoxy groups to hydroxyl derivatives and produced a new hydrophilic olefin-linked two-dimensional (2D) COF. We experimentally measured the crystallinity of both COFs by X-ray diffraction and used atomistic simulations coupled with cross-polarization/magic angle spinning solid-state nuclear magnetic resonance (CP/MAS ssNMR) to determine the relative amounts of AA-stacking and AB-stacking present. COF-I, with its hydrophobic surface and methoxy groups in the ortho positions, showed the best PFAS adsorption. COF-I reduced the concentration of perfluorooctanoic acid from 20 to 0.069 μg L-1 and to 0.052 μg L-1 for perfluorooctanesulfonic acid. These amounts are lower than the U.S. Environmental Protection Agency advisory level (0.070 μg L-1). High efficiency, fast kinetic adsorption, and reusability of COF-I are advantages of COF-I for PFAS removal from water.

Metal-Organic Framework-Based Composites for the Adsorption Removal of Per- and Polyfluoroalkyl Substances from Water

The increasing health risks posed by per- and polyfluoroalkyl substances (PFASs) in the environment highlight the importance of implementing effective removal techniques. Conventional wastewater treatment processes are inadequate for removing persistent organic pollutants. Recent studies have increasingly demonstrated that metal-organic frameworks (MOFs) are capable of removing PFASs from water through adsorption techniques. However, there is still constructive discussion on the potential of MOFs in adsorbing and removing PFASs for large-scale engineering applications. This review systematically investigates the use of MOFs as adsorbents for the removal of PFAS in water treatment. This primarily involved a comprehensive analysis of existing literature to understand the adsorption mechanisms of MOFs and to identify factors that enhance their efficiency in removing PFASs. We also explore the critical aspects of regeneration and stability of MOFs, assessing their reusability and long-term performance, which are essential for large-scale water treatment applications. Finally, our study highlights the challenges of removing PFASs using MOFs. Especially, the efficient removal of short-chain PFASs with hydrophilicity is a major challenge, while medium- to long-chain PFASs are frequently susceptible to being captured from water by MOFs through multiple synergistic effects. The ion-exchange force may be the key to solving this difficulty, but its susceptibility to ion interference in water needs to be addressed in practical applications. We hope that this review can provide valuable insights into the effective removal and adsorption mechanisms of PFASs as well as advance the sustainable utilization of MOFs in the field of water treatment, thereby presenting a novel perspective.

Photocatalysts for chemical-free PFOA degradation - What we know and where we go from here?

Perfluorooctanoic acid (PFOA) is a toxic and recalcitrant perfluoroalkyl substance commonly detected in the environment. Its low concentration challenges the development of effective degradation techniques, which demands intensive chemical and energy consumption. The recent stringent health advisories and the upgrowth and advances in photocatalytic technologies claim the need to evaluate and compare the state-of-the-art. Among these systems, chemical-free photocatalysis emerges as a cost-effective and sustainable solution for PFOA degradation and potentially other perfluorinated carboxylic acids. This review (I) classifies the state-of-the-art of chemical-free photocatalysts for PFOA degradation in families of materials (Ti, Fe, In, Ga, Bi, Si, and BN), (II) describes the evolution of catalysts, identifies and discusses the strategies to enhance their performance, (III) proposes a simplified cost evaluation tool for simple techno-economical analysis of the materials; (IV) compares the features of the catalysts expanding the classic degradation focus to other essential parameters, and (V) identifies current research gaps and future research opportunities to enhance the photocatalyst performance. We aim that this critical review will assist researchers and practitioners to develop rational photocatalyst designs and identify research gaps for green and effective PFAS degradation.

Functionalization strategies of metal-organic frameworks for biomedical applications and treatment of emerging pollutants: A review

One of the representative coordination polymers, metal-organic frameworks (MOFs) material, is of hotspot interest in the multi field thanks to their unique structural characteristics and properties. As a novel hierarchical structural class, MOFs show diverse topologies, intrinsic behaviors, flexibility, etc. However, bare MOFs have less desirable biofunction, high humid sensitivity and instability in water, restraining their efficiencies in biomedical and environmental applications. Thus, a structural modification is required to address such drawbacks. Herein, we pinpoint new strategies in the synthesis and functionalization of MOFs to meet demanding requirements in in vitro tests, i.e., antibacterial face masks against corona virus infection and in wound healing and nanocarriers for drug delivery in anticancer. Regarding the treatment of wastewater containing emerging pollutants such as POPs, PFAS, and PPCPs, functionalized MOFs showed excellent performance with high efficiency and selectivity. Challenges in toxicity, vast database of clinical trials for biomedical tests and production cost can be still presented. MOFs-based composites can be, however, a bright candidate for reasonable replacement of traditional nanomaterials in biomedical and wastewater treatment applications.

Unique fluorophilic pores engineering within porous aromatic frameworks for trace perfluorooctanoic acid removal

Perfluorooctanoic acid (PFOA), a representative of per/polyfluorinated alkyl substances, has become a persistent water pollutant of widespread concern due to its biological toxicity and refractory property. In this work, we design and synthesize two porous aromatic frameworks (PAF) of PAF-CF3 and PAF-C2F5 using fluorine-containing alkyl based monomers in tetrahedral geometry. Both PAFs exhibit nanosized pores (∼1.0 nm) of high surface areas (over 800 m2 g-1) and good fluorophilicity. Remarkable adsorption capacity (˃740 mg g-1) and superior efficiency (˃24 g mg-1 h-1) are achieved toward the removal of PFOA with 1 μg L-1 concentration owing to unique C-F···F-C interactions. In particular, PAF-CF3 and PAF-C2F5 are able to reduce the PFOA concentration in water to 37.9 ng L-1 and 43.3 ng L-1, below EPA regulations (70 ng L-1). The reusability and high efficiency give both PAFs a great potential for sewage treatment.

Alginate@ZnCO2O4 for efficient peroxymonosulfate activation towards effective rhodamine B degradation: optimization using response surface methodology

A facile chemical procedure was utilized to produce an effective peroxy-monosulfate (PMS) activator, namely ZnCo₂O₄/alginate. To enhance the degradation efficiency of Rhodamine B (RhB), a novel response surface methodology (RSM) based on the Box-Behnken Design (BBD) method was employed. Physical and chemical properties of each catalyst (ZnCo₂O₄ and ZnCo₂O₄/alginate) were characterized using several techniques, such as FTIR, TGA, XRD, SEM, and TEM. By employing BBD-RSM with a quadratic statistical model and ANOVA analysis, the optimal conditions for RhB decomposition were mathematically determined, based on four parameters including catalyst dose, PMS dose, RhB concentration, and reaction time. The optimal conditions were achieved at a PMS dose of 1 g l^-1, a catalyst dose of 1 g l^-1, a dye concentration of 25 mg l^-1, and a time of 40 min, with a RhB decomposition efficacy of 98%. The ZnCo₂O₄/alginate catalyst displayed remarkable stability and reusability, as demonstrated by recycling tests. Additionally, quenching tests confirmed that SO₄˙^-/OH˙ radicals played a crucial role in the RhB decomposition process.

A dispersive solid-phase extraction method for the determination of Aristolochic acids in Houttuynia cordata based on MIL-101(Fe): An analytes-oriented adsorbent selection design

In view of the molecular structure of Aristolochic acid I (AA-I) and Aristolochic acid II (AA-II), MIL-101(Fe) was selected as the sorbent to develop a dispersive solid-phase extraction (d-SPE) method for capturing the two analytes from Houttuynia cordata. The interactions between the sorbent and analytes were investigated by FT-IR, XPS and UV-Vis DRS spectra. The optimized method demonstrated good linearity with R² > 0.9999. The limit of detections (LODs) were 0.007 mg/L and 0.014 mg/L for AA-I and AA-II, respectively, lower than the limit stipulated by Chinese Pharmacopoeia (0.001 %, w/w). The recoveries for AA-I and AA-II were within the range of 73.3-106.4 %. The precisions of intra-day and inter-day were 0.9-5.8 % and 2.1-5.8 %, respectively. Thus, the established method demonstrated to be efficient and reliable to determine AA-I and AA-II in Houttuynia cordata.

Is sorption technology fit for the removal of persistent and mobile organic contaminants from water?

Persistent, Mobile, and Toxic (PMT) and very persistent and very mobile (vPvM) substances are a growing threat to water security and safety. Many of these substances are distinctively different from other more traditional contaminants in terms of their charge, polarity, and aromaticity. This results in distinctively different sorption affinities towards traditional sorbents such as activated carbon. Additionally, an increasing awareness on the environmental impact and carbon footprint of sorption technologies puts some of the more energy-intensive practices in water treatment into question. Commonly used approaches may thus need to be readjusted to become fit for purpose to remove some of the more challenging PMT and vPvM substances, including for example short chained per- and polyfluoroalkyl substances (PFAS). We here critically review the interactions that drive sorption of organic compounds to activated carbon and related sorbent materials and identify opportunities and limitations of tailoring activated carbon for PMT and vPvM removal. Other less traditional sorbent materials, including ion exchange resins, modified cyclodextrins, zeolites and metal-organic frameworks are then discussed for potential alternative or complementary use in water treatment scenarios. Sorbent regeneration approaches are evaluated in terms of their potential, considering reusability, potential for on-site regeneration, and potential for local production. In this context, we also discuss the benefits of coupling sorption to destructive technologies or to other separation technologies. Finally, we sketch out possible future trends in the evolution of sorption technologies for PMT and vPvM removal from water.

Remediation of perfluorooctanoic acid (PFOA) with nano ceramic clay: Synthesis, characterization, scale-up and regenerations

Perfluorooctanoic acid (PFOA) in the ecosystem, resulting from industrial effluent and water bodies, has attracted greater concern. An economical treatment is in demand to optimize the current issue. In this research work, Perfluorooctanoic Acid was treated from drinking water sources with nano-ceramic clay. The ceramic clay was synthesized and characterized with Fourier infrared transformation, scanning electron micrograph, transmission electron micrograph, x-ray diffraction, and thermal analysis. An adsorption process was performed in batch and continuous modes for the effective conditions for maximum removal. In batch mode 82 ± 12 nm ceramic clay particle size; 3.0 initial pH; 210 rpm agitation 1.2 mg/L PFOA concentration; 100 mg/L clay dosage; 27 °C temperature, and 20hrs experimental time shows maximum 99.15% adsorption. The experimental data is well fitted with kinetics, isotherms, and thermodynamics calculated data. In fixed bed, continuous column study 10 h treatment time, 10 cm of bed height, and 2 ml/min were adsorbed 99.99% of PFOA. The experimental data from the fixed bed adsorption equipment was correlated using a number of different mathematical models, including the Thomas, Adams-Bohart, Yoon-Nelson, and Clark models. Overall nano ceramic clay was found to potential adsorbent for Perfluorooctanoic acid removal.

New insights into the oxidative damage and antioxidant defense mechanism in Manila clams (Ruditapes philippinarum) exposed to 8:2 polyfluoroalkyl phosphate diester stress

8:2 perfluoroalkyl phosphate diester (8:2 diPAP) is the main precursor of perfluoroalkyl carboxylic acids, and it has been detected in a wide range of environments. In this study, conventional biochemical and histopathological analyses and transcriptome methods were used to investigate the accumulation and oxidative stress of 8:2 diPAP in Manila clams (Ruditapes philippinarum) as well as the clam's defense mechanisms for the first time. The hepatopancreas was the main target organ for 8:2 diPAP accumulation; the concentration reached 484.0 ± 15.5 ng/g after 7 days of exposure to 10 μg/L of 8:2 diPAP, which was 2-100 times higher than that found in other organs. 8:2 diPAP accumulation resulted in significant lipid peroxidation, and the change in malondialdehyde content was highly correlated with 8:2 diPAP accumulation (r > 0.8). The antioxidant enzymes catalase and peroxidase were significantly activated at 7 days of exposure. Although the levels subsequently returned to normal, this restoration was unable to prevent damage. Histopathological analysis showed that 8:2 diPAP exposure resulted in inflammatory damage to the hepatopancreas, which failed to resolve during the recovery period. Transcriptomic analyses showed that the expression of differentially expressed genes had different degrees of positive/negative correlation with antioxidant indicators, and they were significantly enriched in cell death regulatory pathways such as autophagy, apoptosis, and necrosis. The core factor expression results indicated that 8:2 diPAP exposure induced activation of the organismal autophagy factor followed by a shift towards apoptosis. In addition, pathways related to amino acid metabolism and energy metabolism were involved in determining the cell fate of Manila clams. Overall, these results indicated that 8:2 diPAP induced peroxidation of membrane lipids, disturbed physiological processes, and ultimately initiated programmed cell death in Manila clams. The findings of this study provide new insights into the mechanism of toxicity of 8:2 diPAP exposure in marine bivalves.

A review of PFAS adsorption from aqueous solutions: Current approaches, engineering applications, challenges, and opportunities

Per- and polyfluoroalkyl substances (PFAS) have drawn great attention due to their wide distribution in water bodies and toxicity to human beings. Adsorption is considered as an efficient treatment technique for meeting the increasingly stringent environmental and health standards for PFAS. This paper systematically reviewed the current approaches of PFAS adsorption using different adsorbents from drinking water as well as synthetic and real wastewater. Adsorbents with large mesopores and high specific surface area adsorb PFAS faster, their adsorption capacities are higher, and the adsorption process are usually more effective under low pH conditions. PFAS adsorption mechanisms mainly include electrostatic attraction, hydrophobic interaction, anion exchange, and ligand exchange. Various adsorbents show promising performances but challenges such as requirements of organic solvents in regeneration, low adsorption selectivity, and complicated adsorbent preparations should be addressed before large scale implementation. Moreover, the aid of decision-making tools including response surface methodology (RSM), techno-economic assessment (TEA), life cycle assessment (LCA), and multi criteria decision analysis (MCDA) were discussed for engineering applications. The use of these tools is highly recommended prior to scale-up to determine if the specific adsorption process is economically feasible and sustainable. This critical review presented insights into the most fundamental aspects of PFAS adsorption that would be helpful to the development of effective adsorbents for the removal of PFAS in future studies and provide opportunities for large-scale engineering applications.

Multiple interactions steered high affinity toward PFAS on ultrathin layered rare-earth hydroxide nanosheets: Remediation performance and molecular-level insights

The global occurrence of per- and polyfluoroalkyl substances (PFAS) in aquatic systems has raised concerns about their adverse effects on ecosystems and human health. Adsorption is a promising technique for the remediation of PFAS, yet effective adsorbents with rapid uptake kinetics and high adsorption capacity are still in high demand, and molecular-level understanding of the interfacial adsorption mechanisms is lacking. In this study, we developed a superior layered rare-earth hydroxide (LRH) adsorbent, ultrathin Y₂(OH)_4.86Cl_1.44·1·07H₂O (namely YOHCl) nanosheets, to achieve the effective removal of perfluorooctanoic acid (PFOA). YOHCl nanosheets exhibited ultra-high adsorption capacity toward PFOA (up to 957.1 mg/g), which is 1.9 times and 9.3 times higher than the state-of-the-art layered double hydroxides (MgAl-LDH) and benchmark granular activated carbon (GAC) under the same conditions, respectively. Furthermore, YOHCl nanosheets pose stable performance on the removal of PFOA under various water matrices with robust reusability. We also developed YOHCl-based continuous-flow column, demonstrating its promise in simultaneously removing multiple PFAS with wide range of chain lengths at environmentally relevant concentrations. With the molecular-level investigations, we have revealed that multi-mechanism, including ion exchange, electrostatic attraction and bidentate/bridging coordination, contributed to the strong PFOA-YOHCl affinity, leading to the ultra-high adsorption capacity of PFOA. We have provided emerging LRHs-based adsorbents for the effective remediation of PFAS with molecular-level insights on the interfacial mechanisms.

A juxtaposed review on adsorptive removal of PFAS by metal-organic frameworks (MOFs) with carbon-based materials, ion exchange resins, and polymer adsorbents

The removal of poly- and perfluoroalkyl substances (PFAS) from the aquatic environment is a universal concern due to the adverse effects of these substances on both the environment and public health. Different adsorbents, including carbon-based materials, ion exchange resins, biomaterials, and polymers, have been used for the removal of short-chain (C < 6) and long-chain (C > 7) PFAS from water with varying performance. Metal-organic frameworks (MOFs), as a new generation of adsorbents, have also been recently used to remove PFAS from water. MOFs provide unique properties such as significantly enhanced surface area, structural tunability, and improved selectivity compared to conventional adsorbents. However, due to various types of MOFs, their complex chemistry and morphology, different PFAS compounds, lack of standard adsorption test, and different testing conditions, there are inconclusive and contradictory findings in the literature. Therefore, this review aims to provide critical analysis of the performance of different types of MOFs in the removal of long-chain (C > 7), short-chain (C < 6), and ultra-short-chain (C < 3) PFAS and comprehensively study the efficiency of MOFs for PFAS removal in comparison with other adsorbents. In addition, the adsorption mechanisms and kinetics of PFAS components on different MOFs, including Materials of Institute Lavoisier (MIL), Universiteit of Oslo (UiO), Zeolitic imidazolate frameworks (ZIFs), Hong Kong University of Science and Technology (HKUST), and other hybrid types of MOF were discussed. The study also discussed the effect of environmental factors such as pH and ionic strength on the adsorption of PFAS on MOFs. In addition to the adsorption process, the reusability and regeneration of MOFs in the PFAS removal process are discussed. Finally, challenges and future outlooks of the utility of MOFs for PFAS removal were discussed to inspire future critical research efforts in removing PFAS.

A tumor microenvironment-activated metal-organic framework-based nanoplatform for amplified oxidative stress-induced enhanced chemotherapy

Engineering a highly tumor microenvironment-responsive nanoplatform toward effective chemotherapy has always been a challenge in targeted cancer treatment. Metal-organic frameworks are a promising delivery system to reformulate previously approved drugs for enhanced chemotherapy, such as disulfiram (DSF). Herein, a tumor microenvironment-activated metal-organic framework-based nanoplatform DSF@MOF-199@FA has been fabricated to realize amplified oxidative stress-induced enhanced chemotherapy. Our results unveil that the copper ions and DSF released by DSF@MOF-199@FA in an acidic environment can be converted into toxic bis(N, N-diethyl dithiocarbamate) copper and then induce cell apoptosis. Simultaneously, we determined that the apoptosis outcome is further promoted by amplified oxidative stress through effective generation of reactive oxygen species and GSH elimination. In conclusion, this work provides a promising platform for effective anticancer treatment.

Sources, occurrence, and treatment techniques of per- and polyfluoroalkyl substances in aqueous matrices: A comprehensive review

Per- and polyfluoroalkyl substances (PFAS), a class of synthetic organic pollutants, have prompted concerns about their global prevalence and possible health effects. This review consolidates the most recent data on different aspects of PFAS, such as their occurrence, and prominent sources. The current literature analysis of PFAS occurrence suggests significant variation in their concentration ranging from 0.025 to 1.2 × 10⁸ ng/L in wastewater, 0.01 to 8.9 × 10⁵ ng/L in surface water, and <0.01 to 1.3 × 10⁴ ng/L in groundwater globally. Since conventional treatment techniques are inadequate in remediating PFAS, innovative treatment approaches based on their removal or mineralization mechanism have been comprehensively reviewed. Advanced treatment technologies have shown degradation or removal of PFAS to be around 6 and > 99.9% in different aqueous matrices. However, due to significant drawbacks in their applicability in wastewater treatment plants (WWTPs), a novel treatment train approach has emerged as an effective alternative. This approach synergistically integrates multiple remediation techniques while addressing the impediments of individual treatments. Furthermore, nanofiltration (NF270) combined with electrochemical degradation has been demonstrated to be the most efficient (>98%) treatment train approach in PFAS remediation. If implemented in WWTPs, nanofiltration followed by adsorption using activated carbon is also a viable method for PFAS removal.

A novel process for food waste recycling: A hydrophobic liquid mulching film preparation

Appropriate and effective recycling of food waste (FW) has become increasingly significant with the promotion of garbage classification in China. In this study, a novel and green process was developed to recycle FW to prepare a biodegradable composite liquid mulching film (LMF) through crosslinking with sodium alginate (SA). The solid phase of FW was obtained as the raw material after hydrothermal pretreatment to remove pathogens and salts, and to improve the reactivity of active components at a moderate temperature. The prepared LMF had a hydrophobic surface and compact structure due to the lipid in FW and the acetalization reaction and hydrogen bonds among SA, glutaraldehyde and multi-active components of FW, resulting in enhanced water vapor barrier properties. The minimum water vapor permeability of the prepared LMF reached (8.23 ± 0.05) ✕ 10^-12 g cm/(cm²·s·Pa) with 1.82 wt % of plasticizer, 0.74 wt% of crosslinker and a mass ratio of HTP-FW to SA of 3.56:1. The prepared LMF showed good mechanical properties and could maintain its integrity after spraying it on the soil surface for 31 days. In addition, it could effectively prevent the loss of soil moisture and heat, promote the seed germination of Chinese cabbage and achieve 89.14% of weight loss after burying in the soil for 27 days. This study provides a high value-added route to convert the FW to a hydrophobic LMF with superior properties, which addresses not only the problem of food waste but also the pollution of plastic mulching film.

A review of recent studies on toxicity, sequestration, and degradation of per- and polyfluoroalkyl substances (PFAS)

The fate, effects, and treatment of per- and polyfluoroalkyl substances (PFAS), an anthropogenic class of chemicals used in industrial and commercial production, are topics of great interest in recent research and news cycles. This interest stems from the ubiquity of PFAS in the global environment as well as their significant toxicological effects in humans and wildlife. Research on toxicity, sequestration, removal, and degradation of PFAS has grown rapidly, leading to a flood of valuable knowledge that can get swamped out in the perpetual rise in the number of publications. Selected papers from the Journal of Hazardous Materials between January 2018 and May 2022 on the toxicity, sequestration, and degradation of PFAS are reviewed in this article and made available as open-access publications for one year, in order to facilitate the distribution of critical knowledge surrounding PFAS. This review discusses routes of toxicity as observed in mammalian and cellular models, and the observed human health effects in exposed communities. Studies that evaluate of toxicity through in-silico approaches are highlighted in this paper. Removal of PFAS through modified carbon sorbents, nanoparticles, and anion exchange materials are discussed while comparing treatment efficiencies for different classes of PFAS. Finally, various biotic and abiotic degradation techniques, and the pathways and mechanisms involved are reviewed to provide a better understanding on the removal efficiencies and cost effectiveness of existing treatment strategies.

Highly selective cesium removal under acidic and alkaline conditions using a novel potassium aluminum thiostannate

The pH values of nuclear wastewater are extremely low or high, which make the efficient removal of ¹³⁷Cs a major concern among the issues for safety management and environmental remediation. Existing metal sulfides for Cs⁺ adsorption have shown poor performance at acidic and alkaline conditions, and the reason has not been revealed yet. Herein, a novel potassium aluminum thiostannate (KAlSnS-3) adsorbent was designed and its Cs⁺ adsorption mechanism over a wide pH range was investigated. We hypothesized that Al³⁺ dopant on Sn⁴⁺ sites would allow stable adsorption for Cs⁺ upon its partial release at acidic and alkaline conditions. As a result, KAlSnS-3 demonstrated excellent adsorption performance across a broad pH range (1-13), and high selectivity toward Cs⁺, even under high salinity conditions (in tap water K_d = 3.12 × 10⁴ mL/g; and in artificial seawater K_d = 3.42 × 10³ mL/g). KAlSnS-3 also exhibited rapid adsorption kinetics (R = 97.6% in the first minute), a remarkable adsorption capacity (259.31 mg/g), and a high distribution coefficient (2.09 × 10⁵ mL/g) toward Cs⁺. In addition, the high reusability of KAlSnS-3 was observed, suggesting its potential for real-world applications. The mechanism for enhancing performance at low and high pH values was discussed with the evidence of crystallinity, elemental concentrations, and binding energy of electrons based on the concept of electrostatic interactions and chemical affinity. In summary, this work provides insights into the mechanism of Cs⁺ removal under a wide pH range, and the impressive Cs⁺ adsorption performance indicates the application potential of KAlSnS-3 in wastewater treatment.

Catalase-integrated metal-organic framework with synergetic catalytic activity for colorimetric sensing

As a platform for enzyme immobilization, metal-organic frameworks (MOFs) can protect enzyme activity from the interference of external adverse environment. Although these strategies have been proven to produce good results, little consideration has been given to the functional similarity of MOFs to the encapsulated enzyme. Here, catalase (CAT) was encapsulated in Fe-BTC with peroxidase-like activity to obtain a stable composite (CAT@Fe-BTC) with synergistic catalytic activity. Depending on the superior selectivity and high catalytic activity of CAT@Fe-BTC, colorimetric sensing for the detection of hydrogen peroxide and phenol was developed. This work demonstrates that the integration of functional MOFs with natural enzyme can be well applied to the construction of efficient catalysts.

Rapid removal of PFOA and PFOS via modified industrial solid waste: Mechanisms and influences of water matrices

Emerging perfluoroalkyl and polyfluoroalkyl substances contaminate waters at trace concentrations, thus rapid and selective adsorbents are pivotal to mitigate the consequent energy-intensive and time-consuming issues in remediation. In this study, coal combustion residuals-fly ash was modified (FA-SCA) to overcome the universal trade-off between high adsorption capacity and fast kinetics. FA-SCA presented rapid adsorption (t_eq = 2 min) of PFOX (perfluorooctanoic acid and perfluorooctanesulfonic acid, collectively), where the dynamic adsorption capacity (q_dyn = q_m/t_eq) was 2-3 orders of magnitude higher than that of benchmark activated carbons and anion-exchange resins. Investigated by advanced characterization and kinetic models, the fast kinetics and superior q_dyn are attributed to (1) elevated external diffusion driven by the submicron particle size; (2) enhanced intraparticle diffusion caused by the developed mesoporous structure (V_meso/V_micro = 8.1); (3) numerous quaternary ammonium anion-exchange sites (840 μmol/g), and (4) appropriate adsorption affinity (0.031 L/μmol for PFOS, and 0.023 L/μmol for PFOA). Since the adsorption was proven to be a synergistic process of electrostatic and hydrophobic interactions, effective adsorption ([PFOX]_ini = 1.21 μM, concentration levels of highly-contaminant-sites) was obtained at conventional natural water chemistries. High selectivity (>85.4% removal) was also achieved with organic/inorganic competitors, especially compounds with partly similar molecular structures to PFOX. In addition, >90% PFOX was removed consistently during five cycles in mild regeneration conditions (pH 12 and 50 °C). Overall, FA-SCA showed no leaching issues of toxic metals and exhibits great potential in both single-adsorption processes and treatment train systems.

Degradation of norfloxacin by MOF-derived lamellar carbon nanocomposites based on microwave-driven Fenton reaction: Improved Fe(III)/Fe(II) cycle

In this paper, a new type of iron-based magnetic nanoparticle material embedding mesoporous carbon (Fe@C₇₀₀) was prepared by simple pyrolysis of a MIL-101-Fe precursor and employed in the microwave-catalyzed degradation of norfloxacin (NOR) with the presence of H₂O₂. Characterization results showed successful anchoring of Fe⁰ nanoparticles in the carbon matrix. Under optimal treatment conditions (Calcination temperature = 700 °C, H₂O₂ dosage = 40 mM, MW power = 500 W, NOR dosage = 50 mg L^-1 and initial pH = 4), the degradation efficiency of NOR reached 95.22%. The catalyst showed exceptional degradation properties over a relatively wide pH range. The mesoporous carbon in the catalyst promoted electron transfer, enhanced the Fe(III)/Fe(II) cycle, increased contact between Fe⁰ and Fe²⁺ with H₂O₂, and accelerated the production of ·OH. Furthermore, density functional theory (DFT) calculations were used to predict the fragile active sites in NOR and to analyze the degradation pathway of NOR in combination with intermediates. Fe@C₇₀₀ retained good activity after 5 cycles. Reduced toxicity of intermediates predicted by T.E.S.T. compared to NOR. This study presented a new avenue for the rational design of Fe⁰-carbon composites as microwave-assisted Fenton-like catalysts for potential applications in wastewater treatment.

Activated carbon versus metal-organic frameworks: A review of their PFAS adsorption performance

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a class of fluorinated aliphatic compounds considered as emerging persistent pollutants. Owing to their adverse effects on human health and environment, efficient methods of their removal from various complex matrices need to be developed. This review focuses on recent results addressing the adsorption of PFAS on activated carbons (AC) and metal-organic frameworks (MOF). While the former are well-established adsorbents used in water treatment, the latter are relatively new and still not applied at a large scale. Nevertheless, they attract research interests owing to their developed porosity and versatile surface chemistry. While AC provide high volumes of pores and hydrophobic surfaces to strongly attract fluorinated chains, MOF supply sites for acid-base complexation and a variety of specific interactions. The modifications of AC are focused on the introduction of basicity to attract PFAS anions via electrostatic/chemical interactions, and those of MOF - on structural defects to increase the pore sizes. Based on the comparison of the performance and specifically adsorption forces provided by these two groups of materials, activated carbons were pointed out as worthy of further research efforts. This is because their surface, especially that in large pores, where dispersive forces are week and where extensive pore space might be utilized to adsorb more PFAS, can be further chemically modified and these modifications might be informed by the mechanisms of PFAS adsorption, which are specific for MOF. This review emphasizes the effects of these modifications on the adsorption mechanism and brings the critical assessment of the advantages/disadvantages of both groups as PFAS adsorbents.

Bicarbonate-enhanced iron-based Prussian blue analogs catalyze the Fenton-like degradation of p-nitrophenol

P-nitrophenol (PNP), a widely used compound, is harmful to the environment and human health. In this study, four iron-based Prussian blue analogs (PBAs) were prepared by coprecipitation (Co-Fe PBA, Mn-Fe PBA, Cu-Fe PBA and Fe-Fe PBA). The Co-Fe PBA exhibited high peroxymonosulfate (PMS) activation performance for PNP degradation, removing over 90% of PNP in 60 min at an optimal pH of 7, temperature at 30 ℃, initial concentration of 20 mg/L, PBA dose of 0.2 g/L and PMS dose of 1 g/L. The physicochemical properties of the Co-Fe PBA were investigated by various characterization methods. The catalytic activity of PBA and the influence of various process parameters and water quality on the catalytic reaction were investigated to elucidate the mechanism of p-nitrophenol degradation by PBA-activated persulfate. Moreover, the mechanism of accelerated degradation of PNP under HCO₃^- conditions and the role of major reactive oxides were determined by EPR measurement methods and free radical trapping experiments. HCO₃^- was found to directly activate PMS to produce reactive oxygen species, and ¹O₂, ∙OH and SO₄^∙- were all greatly increased. This work presents a promising green heterogeneous catalyst for the degradation of emerging contaminants (ECs) in real wastewater with natural organic matter and coexisting anions by PMS activation.

Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Tetracycline (TC) is a commonly used antibiotic that has gained wide spread notoriety owing to its high environmental risks. In this study, rich carbonyl-modified carbon-coated Fe⁰ was obtained by pyrolysis of MIL-100(Fe) in an Ar atmosphere, and used to activate peroxymonosulfate (PMS) for the degradation of tetracycline in water. The roles of Fe⁰, carbon and surface carbonyl on PMS activation were investigated. Fe⁰ continuously activated PMS, acted as a sustained-release source of Fe²⁺, and could effectively activate PMS to produce SO₄^•-, O₂^•- and •OH. Carbon was found to do responsible for electron transportation during the activation of PMS and slow down the oxidation of Fe⁰. The carbonyl group on the carbon surface layer was the active site of ¹O₂, which explains the enhanced performance for TC degradation. When Ca = 0.1 g/L and C₀ = 0.4 mM, TC degradation rate reached 96%, which was attributed to the synergistic effect of radicals (i.e., SO₄^•-, O₂^•-, •OH) and non-radical (i.e., ¹O₂). Finally, the degradation pathway was proposed by combining density functional theory (DFT) calculations with liquid chromatography-mass spectrometry (LC-MS), toxicities of the intermediate products were also evaluated. All results show that carbonyl-modified carbon-coated Fe⁰ possesses promising capacity for the removal of antibiotics from water.

Selenite capture by MIL-101 (Fe) through FeOSe bonds at free coordination Fe sites

Selective immobilization of SeO₃^2- is highly desired for the remediation of Se-contaminated water. Thus, the irreversible sorption of SeO₃^2- ions by adsorbents through unique coordination bonds with high affinity is needed. Herein, we demonstrated that Fe-based metal-organic framework (MOF) (Fe-MIL-101) with free coordination sites (FCSs) enabled selective and irreversible capture of SeO₃^2- ions from aqueous solution with fast kinetics and a high uptake capacity of 183.7 mg∙g^-1, owing to large MOF apertures and substantial numbers of FCSs as capture sites through forming Fe-O-Se bonds. Meanwhile, Fe-MIL-101 maintained excellent performance in a broad pH range (4-11) and high selectivity for SeO₃^2- ions in the presence of excessive competitive anions (e.g., CO₃^2-, PO₄^3-). Density functional theory (DFT) calculation, extended X-ray absorption fine structure (EXAFS), and Mössbauer fittings confirmed that the capture on Fe-MIL-101 was through the Fe-O-Se coordination bonds between FCSs and SeO₃^2-. Moreover, Fe-MIL-101 could effectively remove SeO₃^2- in simulated natural water and sewage by overcoming the influence of co-existing ions and organic matters. This study highlights new opportunities for the design of MOF-based materials for removing toxic and radioactive anions with irreversibility and high selectivity from natural and waste water.

Glycine- and Alanine-Intercalated Layered Double Hydroxides as Highly Efficient Adsorbents for Phosphate with Kinetic Advantages

Phosphate is the main cause of eutrophication. Layered double hydroxides (LDH) are considered to be promising phosphate adsorbents due to their high affinity and large capacity. In this study, we partially intercalated zwitterionic glycine and alanine into Cl-LDH (corresponding to MgAl-LDH with interlayer anion Cl-) and synthesized efficient inorganic-organic nanohybrids for phosphate removal with kinetic advantages. Gly-Cl-LDH, Ala-Cl-LDH and Cl-LDH were characterized, and their phosphate adsorption performances under the influence of environment factors (e.g., solution pH, coexisting anions, contact time and phosphate concentration) were investigated. The results show that Gly-Cl-LDH and Ala-Cl-LDH had larger specific surface areas and larger interlayer spaces than Cl-LDH, and exhibited better adsorption performance at a lower pH and better adsorption selectivity against SO42-. Kinetic experiments indicated that Gly-Cl-LDH and Ala-Cl-LDH can reduce phosphate concentrations to a lower level in a shorter time. The pseudo-second-order kinetic constants of Gly-Cl-LDH and Ala-Cl-LDH were 1.27 times and 3.17 times of Cl-LDH, respectively (R2 > 0.996). The maximum adsorption capacities derived from a Langmuir model of Cl-LDH, Gly-Cl-LDH and Ala-Cl-LDH are 63.2 mg-P/L, 55.8 mg-P/L and 58.2 mg-P/L, respectively, which showed superiority over the prevailing phosphate adsorbents. This research provides highly efficient adsorbents for removing phosphate from aqueous solutions.

Facile fabrication of N-doped hierarchical porous carbons derived from soft-templated ZIF-8 for enhanced adsorptive removal of tetracycline hydrochloride from water

N-doped hierarchical porous carbons (NHPCs) were successfully prepared from soft-templated zeolitic imidazolate framework-8 (ZIF-8) precursors using sodium dodecylbenzene sulfonate (SDBS) as a template through facile one-step carbonization and applied in tetracycline hydrochloride (TCH) adsorption. The NHPC synthesized at 1000 °C with an SDBS/Zn²⁺ molar ratio of 0.075 exhibited the highest TCH adsorption (q_m = 80.92 mg g^-1) owing to its relatively large BET surface area (1067.41 m² g^-1) and pore volume (1.22 cm³ g^-1) and the stronger surface interaction between TCH and NHPCs (HC1000-0.075). Compared with surfactant-free ZIF-8-derived carbon (HC), introduction of SDBS in the ZIF-8 precursor not only improved the pore structure of the carbon materials but also increased the nitrogen content and the number of surface functional groups. Adsorption kinetics and isotherms showed that the pseudo-second-order model and Sips model fit the TCH adsorption behavior on HC and HC1000-0.075 well. Adsorption experiments and characterizations revealed that the adsorption mechanism involved in TCH adsorption on HC1000-0.075 mainly depended on the synergistic effect of pore filling, H-bonding, π-π interactions, and weak electrostatic interactions. This study provides an effective and simple strategy for fabricating MOF-derived NHPCs as a promising adsorbent for the removal of antibiotics from water.

Removal of oxytetracycline promoted by manganese-doped biochar based on density functional theory calculations: Comprehensive evaluation of the effect of transition metal doping

The regulation of surface electrons by non-metal doping of biochar (BC) is environmentally and ecologically significant. However, systematic studies on the regulation of surface electrons by transition metal doping are lacking. The present study is based on the observation that the removal efficiency of oxytetracycline (OTC) by Mn-doped BC is eight times higher than that of undoped BC in 20 min. The effects of Mn doping on the crystal phase formation, persistent free radicals (PFRs), electron density, molecular orbitals, and nucleophilic active sites of BC are investigated, and the intermediate products of OTC are evaluated. Mn doping enhances the signal for sp²-hybridised carbon-carbon double bond, forms more delocalised π-bonds, and promotes the formation of free radicals centred on the carbon atoms. The specific surface area of BC increases, and manganese oxide is formed on the its surface. Density functional theory calculations show that Mn doping accelerates the electron transfer of BC, provides additional electrons for the BC system, and makes this system more ionised. OTC molecules preferentially attack the nucleophilic reaction sites near Mn atoms based on molecular electrostatic potential measurements. Therefore, this study provides new insights into the surface electronic structures regulated by transition metal elements.

The performance of co-immobilized strains isolated from activated sludge combined with Scenedesmus quadricauda to remove nutrients and organics in black odorous water

In this study, three bacteria were isolated from activated sludge (Pseudomonas aeruginosa, Bacillus subtilis, and Dietzia maris). After that, isolated strains and Scenedesmus quadricauda that could degrade refractory organics, as co-immobilization species, were prepared gel beads to treat black odorous water. Under the optimized conditions, the removal rate of chemical oxygen demand (COD), ammonia nitrogen (NH₃-N), total nitrogen (TN) and total phosphorus (TP) reached 94.36%, 95.7%, 91.22% and 95.27%, respectively, and organics (including aromatic proteins and microbial-by-product-like compounds) were also significantly removed. Microbial analysis reveals that the community structure had a significant difference before and after treatment, and the main dominant at the genus level was transformed from Nitrospirillum (approximately 18.03%) to Flavobacterium (approximately 17.64%). This study also found that the immobilized gel beads have excellent stability and reusability, which provided a feasible and robust bioremediation strategy for the treatment of actual black-odor water.