Influence of microplastics occurrence on the adsorption of 17β-estradiol in soil

Investigating the impact of microplastics on triphenyl phosphate adsorption in soil: Insights into environmental factors and soil properties

Microplastics (MPs) pose significant environmental pollution problems owing to their diverse properties such as various shapes, sizes, compositions, surface features, and levels of degradation. Moreover, their interactions with toxic chemicals and aging processes add complexity to environmental research. This study investigated the adsorption of triphenyl phosphate (TPhP) in soil-only, MP-only, and soil-MP simulated environments under different conditions. The experiment involved three phases: initial exposure to a pH of 5.5 under fluorescent light, subsequent introduction of ultraviolet (UV) radiation, and pH adjustment to 4.0 and 7.0, while maintaining UV exposure, each lasting 7 days. The study found that environmental factors affected TPhP sorption capacity, with higher adsorption observed under UV radiation and acidic conditions. In contrast, the MP-only systems showed no clear trend for TPhP adsorption, suggesting kinetic limitations. When MPs were added to the soil, the adsorption dynamics were altered, with varying adsorption capacities observed for different MP polymers under different aging conditions. ATR-FTIR spectroscopy, micro-Raman spectroscopy, and water contact angle measurements suggested potential photooxidation processes and changes in the surface hydrophobicity of the MPs subjected to simulated environmental conditions. This study provides valuable insights into the interplay between soil properties, MP characteristics, and environmental factors in determining TPhP sorption dynamics in soil-MP environments.

Microplastics supply contaminants in food chain: non-negligible threat to health safety

The occurrence of microplastics (MPs) and organic pollutants (OPs) residues is commonly observed in diverse environmental settings, where their interactions can potentially alter the behavior, availability, and toxicity of OPs, thereby posing risks to ecosystems. Herein, we particularly emphasize the potential for bioaccumulation and the biomagnification effect of MPs in the presence of OPs within the food chain. Despite the ongoing influx of novel information, there exists a dearth of data concerning the destiny and consequences of MPs in the context of food pollution. Further endeavors are imperative to unravel the destiny and repercussions of MPs/OPs within food ecosystems and processing procedures, aiming to gain a deeper understanding of the joint effect on human health and food quality. Nevertheless, the adsorption and desorption behavior of coexisting pollutants can be significantly influenced by MPs forming biofilms within real-world environments, including temperature, pH, and food constituents. A considerable portion of MPs tend to accumulate in the epidermis of vegetables and fruits, thus necessitating further research to comprehend the potential ramifications of MPs on the infiltration behavior of OPs on agricultural product surfaces.

Effect and environmental behaviour of microplastics in soil

Soil microplastic pollution is currently a worldwide concern. Microplastics are organic pollutants that are abundant in the natural environment, are persistent and difficult to degrade and may endanger human health while harming the environment. This article offers a bibliometric analysis of the environmental behaviour of microplastics in soils, as well as a thorough statistical analysis of research goals and trends in this field. We conducted a thorough search of all relevant literature from 2012 to 2022 in the Web of Science core database. The data analysis shows that, starting in 2012, there has been an upward trend in the number of articles about soil microplastic pollution. It can also be seen that China is relatively ahead of the curve in this area of research, followed by the United Kingdom and the United States. This article also systematically describes the research hotspots in this field. The results show that the current research on soil microplastics is mainly focused on their identification, enrichment and toxicity, whereas studies on the migration and transformation of soil microplastics and the mechanism of interaction with other pollutants are still lacking. Our results provide ideas and prospects for future research in this field.

The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective

The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' effects on human health in order to address existing and future knowledge gaps.

Effects of polyethylene microplastics occurrence on estrogens degradation in soil

Growing focus has been drawn to the continuous detection of high estrogens levels in the soil environment. Additionally, microplastics (MPs) are also of growing concern worldwide, which may affect the environmental behavior of estrogens. However, little is known about effects of MPs occurrence on estrogens degradation in soil. In this study, polyethylene microplastics (PE-MPs) were chosen to examine the influence on six common estrogens (estrone (E1), 17α-estradiol (17α-E2), 17β-estradiol (17β-E2), estriol (E3), diethylstilbestrol (DES), and 17α-ethinylestradiol (17α-EE2)) degradation. The results indicated that PE-MPs had little effect on the degradation of E3 and DES, and slightly affected the degradation of 17α-E2, however, significantly inhibited the degradation of E1, 17α-EE2, and 17β-E2. It was explained that (i) obvious oxidation reaction occurred on the surface of PE-MPs, indicating that PE-MPs might compete with estrogens for oxidation sites, such as redox and biological oxidation; (ii) PE-MPs significantly changed the bacterial community in soil, resulting in a decline in the abundance of some bacterial communities that biodegraded estrogens. Moreover, the rough surface of PE-MPs facilitated the estrogen-degrading bacterial species (especially for E1, E2, and EE2) to adhere, which decreased their reaction to estrogens. These findings are expected to deepen the understanding of the environmental behavior of typical estrogens in the coexisting system of MPs.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

Effects of tire-road wear particles on the adsorption of tetracycline by aquatic sediments

Tire-road wear particles (TRWPs) are formed by friction between the tire and the road. TRWPs are ubiquitous across the globe, especially in sediments. However, the possible effects of TRWPs on tetracycline (TC) in aquatic sediments are unknown. To investigate the potential role of TRWPs as carriers of co-pollutants, this study investigated the pore surface properties and TC adsorption behavior of TRWP-contaminated sediments and explored the TC behavior in water sediments, as well as the role of aging processes and TRWPs abundance. The results showed that the surface morphology of TRWP-contaminated sediments changed and the adsorption capacity of sediments to TC increased. The TC adsorption capacity of sediments contaminated by 2% TRWPs increased from 3.15 to 3.48 mg/g. Moreover, the surface physical and chemical properties of TRWPs after UV aging changed, which further increased the TC adsorption capacity. The TC adsorption capacity of the sediments contaminated by aged TRWPs increased from 3.48 to 3.65 mg/g. Changing the proportion of aged TRWPs, we found that the adsorption capacity of sediments contaminated by different proportions of TRWPs for TC was 2% > 1% > 0.5% > 4% > blank sediment. These results may contribute to predicting the potential environmental risks of TRWPs in aquatic sediments.

Mechanistic interpretation of the sorption of terbuthylazine pesticide onto aged microplastics

Microplastics (MPs) pose a global concern due to their ubiquitous distribution. Once in the environment, they are subject to aging, which changes their chemical-physical properties and ability to interact with organic pollutants, such as pesticides. Therefore, this study investigated the interaction of the hydrophobic herbicide terbuthylazine (TBA), which is widely used in agriculture, with artificially aged polyethylene (PE) MP (PE-MP) to understand how aging affects its sorption. PE was aged by an accelerated weathering process including UV irradiation, hydrogen peroxide, and ultrasonic treatment, and aged particles were characterized in comparison to pristine particles. Sorption kinetics were performed for aged and pristine materials, while further sorption studies with aged PE-MP included determining environmental factors such as pH, temperature, and TBA concentration. Sorption of TBA was found to be significantly lower on aged PE-MP compared to pristine particles because aging led to the formation of oxygen-containing functional groups, resulting in a reduction in hydrophobicity and the formation of negatively charged sites on oxidized surfaces. For pristine PE-MP, sorption kinetics were best described by the pseudo-second-order model, while it was intra-particle diffusion for aged PE-MP as a result of crack and pore formation. Sorption followed a decreasing trend with increasing pH, while it became less favorable at higher temperatures. The isotherm data revealed a complex sorption process on altered, heterogeneous surfaces involving hydrophobic interactions, hydrogen bonding, and π-π interactions, and the process was best described by the Sips adsorption isotherm model. Desorption was found to be low, confirming a strong interaction. However, thermodynamic results imply that increased temperatures, such as those resulting from climate change, could promote the re-release of TBA from aged PE-MP into the environment. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirmed TBA sorption onto PE.

Microplastics as carriers of toxic pollutants: Source, transport, and toxicological effects

Microplastic pollution has emerged as a new environmental concern due to our reliance on plastic. Recent years have seen an upward trend in scholarly interest in the topic of microplastics carrying contaminants; however, the available review studies have largely focused on specific aspects of this issue, such as sorption, transport, and toxicological effects. Consequently, this review synthesizes the state-of-the-art knowledge on these topics by presenting key findings to guide better policy action toward microplastic management. Microplastics have been reported to absorb pollutants such as persistent organic pollutants, heavy metals, and antibiotics, leading to their bioaccumulation in marine and terrestrial ecosystems. Hydrophobic interactions are found to be the predominant sorption mechanism, especially for organic pollutants, although electrostatic forces, van der Waals forces, hydrogen bonding, and pi-pi interactions are also noteworthy. This review reveals that physicochemical properties of microplastics, such as size, structure, and functional groups, and environmental compartment properties, such as pH, temperature, and salinity, influence the sorption of pollutants by microplastic. It has been found that microplastics influence the growth and metabolism of organisms. Inadequate methods for collection and analysis of environmental samples, lack of replication of real-world settings in laboratories, and a lack of understanding of the sorption mechanism and toxicity of microplastics impede current microplastic research. Therefore, future research should focus on filling in these knowledge gaps.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Seasonal variations of microplastics in surface water and sediment in an inland river drinking water source in southern China

The aim of this study was to examine microplastic (size distribution of 0.05-5 mm) occurrence and distribution in drinking water source of XJ River during both flooding and dry periods. Surface water and sediment samples were collected from the CS City section of the river in August and December 2020. During the flooding period, microplastic abundances were observed at 0.72-18.6 (7.32 ± 2.36) items L-1 in surface water and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw) in sediment. In the dry period, abundances were slightly higher at 2.88-17.7 (11.0 ± 3.08) items L-1 and 27.0-651 (249 ± 182) items kg-1 dw, respectively. Microplastics were found in higher concentrations in urban areas and downstream of wastewater treatment plants, suggesting anthropogenic sources. The diversity in shapes, colors, and types of microplastics in surface waters and sediments indicates specialized enrichment processes and persistent sources of microplastic pollution. Approximately 60 % of the microplastic particles identified fall within the 50-100 μm range. Furthermore, a significant correlation was observed between these smaller-sized particles and the overall prevalence of microplastics. Fourier-transform infrared spectroscopy and scanning electron microscopy indicated that the microplastics had been subjected to weathering in the environment, contributing to the production of oxygen-containing functional groups and surface cleavage features. The utilization of energy dispersive spectroscopy revealed the presence of microplastics associated with various heavy metals, highlighting the intricate nature of microplastic pollution. Moreover, the high abundance of microplastics may pose a potential ecological risk to the aquatic environment of the XJ River. The results of this study demonstrate concerning levels of microplastics in the XJ River, despite its status as a high-quality water source.

Sorption of ionic liquids in soil enriched with polystyrene microplastic reveals independent behavior of cations and anions

Recently, much attention has been focused on the application of the Ionic Liquids (ILs) with herbicidal activity in agriculture. It has been suggested that through the appropriate selection of cations and anions, one can adjust the properties of ILs, particularly the hydrophobicity, solubility, bioavailability, toxicity. In practical agricultural conditions, it will be beneficial to reduce the mobility of herbicidal anions, such as the commonly applied 2,4-dichlorophenoxyacetic acid [2,4-D] in the soil. Furthermore, microplastics are becoming increasingly prevalent in the soil, potentially stimulating herbicidal sorption. Therefore, we investigated whether cations in ILs influence the mobility of anions in OECD soil supplemented with polystyrene microplastic (PS). For this purpose, we used the 2,4-D based ILs consisting of: a hydrophilic choline cation [Chol][2,4-D] and a hydrophobic choline cation with a C12chain [C12Chol][2,4-D]. Characterization of selected micropolystyrene was carried out using the BET sorption-desorption isotherm, particle size distribution and changes in soil sorption parameters such as soil sorption capacity and cation exchange capacity. Based on the batch sorption experiment, the effect of microplastic on the sorption of individual cations and anions in soil contaminated with micropolystyrene was evaluated. The results obtained indicate that the introduction of a 1-10% (w/w) PS resulted in an 18-23% increase of the soil sorption capacity. However, the sorption of both ILs' cations increased only by 3-5%. No sorption of the [2,4-D] anion was noted. This suggests that cations and anions forming ILs, behave independently of each other in the environment. The results indicate the fact that ILs upon introduction into the environment are not a new type of emerging contaminant, but rather a typical mixture of ions. It is worth noting that when analyzing the behavior of ILs in the environment, it is necessary to follow the fate of both cations and anions.

Adsorption of tetracycline on polyvinyl chloride microplastics in aqueous environments

Microplastics (MPs), as carriers of organic pollutants in the environment, have become a growing public concern in recent years. Tetracycline (TTC) is an antibiotic that can be absorbed by MPs and have a harmful effect on human health. Therefore, this study was conducted with the aim of investigating the adsorption rate of TTC onto polyvinyl chloride (PVC) MPs. In addition, the adsorption mechanism of this process was studied using isothermal, kinetic, and thermodynamic models. For this purpose, experimental runs using the Box-Behnken model were designed to investigate the main research parameters, including PVC dose (0.5-2 g/L), reaction time (5-55 min), initial antibiotic concentration (5-15 mg/L), and pH (4-10). Based on the research findings, the highest TTC adsorption rate (93.23%) was obtained at a pH of 10, a contact time of 55 min, an adsorbent dose of 1.25 g/L, and an antibiotic concentration of 10 mg/L. The study found that the adsorption rate of TTC followed the pseudo-second-order and Langmuir models. Thermodynamic data indicated that the process was spontaneous, exothermic, and physical. Increasing ion concentration decreased TTC adsorption, and distilled water had the highest adsorption, while municipal wastewater had the lowest adsorption. These findings provide valuable insights into the behavior of MPs and organic pollutants, underscoring the importance of conducting additional research and implementing measures to mitigate their detrimental effects on human health and the environment.

Organic fertilizer facilitates the soil microplastic surface degradation and enriches the diversity of bacterial biofilm

The land-use of organic fertilizers is considered as an important sustainable method for resource utilization, which may have an impact on the microplastic behaviors in the soil. Here, a 240-d dark culture experiment was conducted to reveal the degradation and biofilm characteristics of degradable and refractory granule microplastics in soil and soil-fertilizer systems. The results indicated that microplastics generally exhibited a weak weight loss as well as a specific etiolation on the surface after the culture, especially polyvinyl-chloride and polyhydroxyalkanoates (PHA). Increase in carbon-oxygen functional groups and the changes of oxygen/carbon ratios were noticed, which implied that oxidation and degradation occurred on the surface of microplastics during the cultural process. The changes were more intense on the degradable PHA, and the fertilized-soil treatment than those of the refractory microplastics and the pure soil. Moreover, the addition of organic fertilizers enriched the community diversity of bacterial biofilm on multiple microplastic surfaces. In this regard, the animal fertilizers provided a stronger effect than the plant fertilizers. Overall, the soil, fertilizer and microplastic types affected the community structure and diversity of bacterial biofilm. The outcomes of this study would provide a theoretical basis for the utilization of organic matters for agricultural soil applications.

Adsorption behaviors and bioavailability of tetrabromobisphenol A in the presence of polystyrene microplastic in soil: Effect of microplastics aging

Microplastics, a kind of emerging pollutant, have become a global environmental research hotspot in recent years due to its wide distribution in soil and its impact on soil ecosystems. However, little information is available on the interactions between microplastics and organic contaminants in soil, especially after microplastic aging. The impact of polystyrene (PS) microplastic aging on the sorption of tetrabromobisphenol A (TBBPA) in soil and the desorption characteristics of TBBPA-loaded microplastics in different environments were studied. The results showed a significant increase of 76.3% in adsorption capacity of TBBPA onto PS microplastics after aging for 96 h. Based on the results of characterization analysis and density functional theory (DFT) calculation, the mechanisms of TBBPA adsorption changed mainly from hydrophobic and π-π interactions on pristine PS microplastics to hydrogen bond and π-π interactions on aged PS microplastics. The presence of PS microplastics increased the TBBPA sorption capacity onto soil-PS microplastics system and significantly altered the distribution of TBBPA on soil particles and PS microplastics. The high TBBPA desorption over 50% from aged PS microplastics in simulated earthworm gut environment suggested that TBBPA contamination combined with PS microplastics might pose a higher risk to macroinvertebrates in soil. Overall, these findings contribute to the understanding of impact of PS microplastic aging in soil on the environmental behaviors of TBBPA, and provide valuable reference for evaluating the potential risk posed by the co-existence of microplastics with organic contaminants in soil ecosystems.

Toxicity of microplastics and nanoplastics: invisible killers of female fertility and offspring health

Microplastics (MPs) and nanoplastics (NPs) are emergent pollutants, which have sparked widespread concern. They can infiltrate the body via ingestion, inhalation, and cutaneous contact. As such, there is a general worry that MPs/NPs may have an impact on human health in addition to the environmental issues they engender. The threat of MPs/NPs to the liver, gastrointestinal system, and inflammatory levels have been thoroughly documented in the previous research. With the detection of MPs/NPs in fetal compartment and the prevalence of infertility, an increasing number of studies have put an emphasis on their reproductive toxicity in female. Moreover, MPs/NPs have the potential to interact with other contaminants, thus enhancing or diminishing the combined toxicity. This review summarizes the deleterious effects of MPs/NPs and co-exposure with other pollutants on female throughout the reproduction period of various species, spanning from reproductive failure to cross-generational developmental disorders in progenies. Although these impacts may not be directly extrapolated to humans, they do provide a framework for evaluating the potential mechanisms underlying the reproductive toxicity of MPs/NPs.

Effect of microplastics on the binding properties of Pb(ii) onto dissolved organic matter: insights from fluorescence spectra and FTIR combined with two-dimensional correlation spectroscopy

Heavy metal cations are a typical type of inorganic pollutant that has persistent distribution characteristics in aquatic environments and are easily adsorbed on carriers, posing serious threats to ecological safety and human health. Some studies have shown that the coexistence of dissolved organic matter (DOM) and microplastics (MPs) promotes the adsorption of heavy metal cations, but the mechanism of promoting the adsorption process has not been thoroughly studied. In this study, the effect of polystyrene microplastics (PSMPs) on the binding properties of Pb2+ onto humic acid (HA) in aquatic environments was investigated by spectral analysis and two-dimensional correlation (2D-COS) analysis. When PSMPs co-existed with HA, the adsorption capacity of Pb2+ increased. On the one hand, Pb2+ is directly adsorbed on HA through the mechanism of complexation reaction, ion exchange and electrostatic interaction. On the other hand, Pb2+ is first adsorbed on PSMPs by electrostatic action and indirectly adsorbed on HA in the form of PSMPs-Pb2+ owing to the interaction between HA and PSMPs, which increases the adsorption amount of Pb2+ on HA. This study is significant for studying the migration and regression of heavy metal cation contaminants when PSMPs co-exist with DOM in an aqueous environment.

Insight into the effect of microplastics on the adsorption and degradation behavior of thiamethoxam in agricultural soils

Thiamethoxam and microplastics are both common pollutants in farmland soil; however, few studies have focused on the interaction between thiamethoxam and microplastics in soil. Here, a batch experiment and soil incubation experiment were performed to explore the mechanism and effects of microplastics on the adsorption and degradation behaviors of thiamethoxam in soil, respectively. First, the batch experimental results indicated that the adsorption process of thiamethoxam on the microplastic/soil mixtures and soil-only systems mainly relies on chemical interactions. All sorption processes had moderate intensities of adsorption, and the sorption process occurred on the heterogeneous surface. In addition, the particle size and dose of microplastics could both affect the adsorption behavior of thiamethoxam onto microplastics/soil systems. The sorption capacity of thiamethoxam in soil decreases as the particle size of microplastics increases, but the sorption capacity increases as the dose of microplastics increases. Second, the results of the soil incubation experiment showed that the half-lives of thiamethoxam ranged from 57.7 d to 86.6 d, from 86.6 d to 173.3 d, and 115 d in the biodegradable microplastic/soil systems, nondegradable microplastic/soil systems, soil-only systems, respectively. These results indicate that biodegradable microplastics promoted the degradation of thiamethoxam, while nondegradable microplastics delayed the degradation process of thiamethoxam in soil. Overall, microplastics could change the degradation behaviors, sorption capacity and adsorption efficiency, and then affect the mobility and persistence of thiamethoxam in the soil environment. These findings contribute to understanding the influence of microplastics on the environmental fate of pesticides in the soil environment.

Polyethylene mulch film-derived microplastics enhance the bioaccumulation of atrazine in two earthworm species (Eisenia fetida and Metaphire guillelmi) via carrier effects

Microplastics (MPs) may significantly affect the bioavailability of coexisting pollutants in soil by adsorption-desorption behavior. However, the mechanisms underlying these interaction remain unclear. Herein, the influence of unused polythylene mulch film-derived MPs (MFMPs) and farmland residual polyethylene mulch film-derived MPs (MFMPs-aged) on the adsorption-desorption behavior and bioavailability of atrazine (ATZ) in soil were investigated. The adsorption kinetics and the adsorption isotherms of ATZ on soil, MFMPs, and MFMPs-aged fitted well by the pseudo-second-order model and the Langmuir model, respectively. ATZ were easier to desorb from soil, MFMPs, and MFMPs-aged in the simulated earthworm digestive fluid than that in the CaCl₂ solution. The adsorption and desorption capacities of MFMPs and MFMPs-aged for ATZ were higher than those of soil, especially for MFMPs-aged. The existence of MPs in soil strengthened the adsorption and desorption capacities of ATZ, and the strengthened effects were promoted by the addition amount and aging process of MPs. Moreover, the occurrence of MPs significantly increased the bioaccumulation of ATZ in earthworms, especially for MFMPs-aged. This study deepens the knowledge of the interaction mechanisms of mulch film-derived MPs and pesticide pollution.

Polyethylene and polypropylene microplastics reduce chemisorption of cadmium in paddy soil and increase its bioaccessibility and bioavailability

Microplastics (MPs) usually coexist with heavy metals (HMs) in soil. MPs can influence HMs mobility and bioavailability, but the underlying mechanisms remain largely unexplored. Here, polyethylene and polypropylene MPs were selected to investigate their effects and mechanisms of sorption-desorption, bioaccessibility and bioavailability of cadmium (Cd) in paddy soil. Batch experiments indicated that MPs significantly reduced the Cd sorption in soil (p < 0.05). Accordingly, soil with the MPs had lower boundary diffusion constant of Cd (C₁= 0.847∼₁.020) and the Freundlich sorption constant (K_F = 0.444-0.616) than that without the MPs (C₁ = 0.894∼₁.035, K_F = 0.500-0.655). X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses suggested that the MPs reduced Cd chemisorption, by covering the soil active sites and thus blocking complexation of Cd with active oxygen sites and interrupting the formation of CdCO₃ and Cd₃P₂ precipitates. Such effects of MPs enhanced about 1.2-1.5 times of Cd bioaccessibility and bioavailability in soil. Almost the same effects but different mechanisms of polyethylene and polypropylene MPs on Cd sorption in the soil indicated the complexity and pervasiveness of their effects. The findings provide new insights into impacts of MPs on the fate and risk of HMs in agricultural soil.

Photo-aged non-biodegradable and biodegradable mulching film microplastics alter the interfacial behaviors between agricultural soil and inorganic arsenic

The impacts of microplastics (MPs) prevalent in soil on the transport of pollutants were urged to be addressed, which has important implications for ecological risk assessment. Therefore, we investigated the influence of virgin/photo-aged biodegradable polylactic acid (PLA) and non-biodegradable black polyethylene (BPE) mulching films MPs on arsenic (As) transport behaviors in agricultural soil. Results showed that both virgin PLA (VPLA) and aged PLA (APLA) enhanced the adsorption of As(Ⅲ) (9.5%, 13.3%) and As(Ⅴ) (22.0%, 6.8%) due to the formation of abundant H-bonds. Conversely, virgin BPE (VBPE) reduced the adsorption of As(Ⅲ) (11.0%) and As(Ⅴ) (7.4%) in soil owing to the "dilution effect", while aged BPE (ABPE) improved arsenic adsorption amount to the level of pure soil due to newly generated O-containing functional groups being feasible to form H-bonds with arsenic. Site energy distribution analysis indicated that the dominant adsorption mechanism of arsenic, chemisorption, was not impacted by MPs. The occurrence of biodegradable VPLA/APLA MPs rather than non-biodegradable VBPE/ABPE MPs resulted in an increased risk of soil accumulating As(Ⅲ) (moderate) and As(Ⅴ) (considerable). This work uncovers the role of biodegradable/non-biodegradable mulching film MPs in arsenic migration and potential risks in the soil ecosystem, depending on the types and aging of MPs.

Occurrence and distribution characteristics of aged microplastics in the surface water, sediment, and crabs of the aquaculture pond in the Yangtze River Delta of China

The artificial breeding of freshwater crabs in China has become the main source, accounting for 45.69 % of the total output in 2020. However, microplastics widely exist in ponds due to the addition of meals, and the aging and breakage of plastic tools, and people know little about the occurrence of microplastics in the environment and the tissues of crabs during the cultivation of crabs in ponds. In this study, the abundance and characteristics of microplastics in ponds and crabs were studied finely, and the types of microplastics produced by meals and tools and the aging degree of microplastics in different media were studied in a typical aquaculture experimental base in the Yangtze Estuary of China. After we digested all the samples, there were microplastics in the water, sediment, and inedible part of crabs and crab meals, mainly in fiber shape, with a particle size of 100~300μm, and they have a certain degree of aging. The abundance of microplastics in surface water ranges from 4.4 to 10.8 items/L, and that in sediment ranges from 28.6 to 54.3 items/100 g·dry weight sediments. The average abundance of microplastics in crabs was 23.9 ± 15.9 items/individual. The content of microplastics in crabs' intestinal tissue was the highest, followed by gills and hepatopancreas. At the same time, the microplastics found in crabs were positively correlated with crab body weight and negatively correlated with hepatopancreas index. The results show that in the process of artificial breeding pond feeding, microplastics will be released from the process of meals dissolving in water, and fall off due to wear and tear during the use of tools. Microplastics found in the water, sediments and the tissues of crabs were all aged. Humans have a risk of ingesting microplastics when they eat the tissues of nonedible parts of crabs.

Investigation of interfacial adsorption between microplastics and methylparaben in aqueous solution

Microplastics and parabens are considered to be a global contaminants, especially in the aquatic ecosystem. The interfacial interaction between four types of microplastics including polystyrene, polyethylene, polyethylene terephthalate, and polyvinyl chloride, and methylparaben were investigated in this study. The results showed that molecular layer dominates the adsorption, with the rate significantly affected by both internal diffusion and external diffusion. Among the four types, polystyrene and polyvinyl chloride showed the smallest and biggest adsorption capability, with the values were 0.656 and 1.269 mg g^-1, respectively. For the adsorption capability, smaller particle size and higher pH value possessed positive effects. However, the existence of metal ions could inhibit the adsorption process, except for a weak promotion at low salinity. Physical adsorption effects, such as electrostatic interaction, hydrogen bond formation, and covalent bond formation, had been identified that dominated the adsorption. This finding could be served as a speculative foundation for the further study of the toxicity, migration, and ecological risk assessment of microplastics in aquatic ecosystem.

Effects of humic acids on the adsorption of Pb(II) ions onto biofilm-developed microplastics in aqueous ecosystems

Microplastics (MPs), as emerging contaminants can behave as carriers for heavy metals in the water environments. Although the adsorption performance of heavy metals on MPs has been widely investigated, the effects of humic acids (HA) on the adsorption have seldom been explored. The authors were compared the Pb(II) adsorption onto biofilm-developed polyvinyl chloride (Bio-PVC) MPs with Pb(II) adsorption onto virgin PVC MPs (V-PVC), and explored the relationship between surface characteristics and the adsorption properties in the coexistence of HA. Our results showed that due to a larger specific surface area and more oxygen containing groups, Bio-PVC had a larger adsorption capability with a value of 3.57 mg/g than original ones (1.85 mg/g) due to its huge specific surface area and more oxygen containing groups. Microbial community analysis showed that the predominate bacteria in biofilms as Proteobacteria, Acidobacteria, Cyanobacteria, Firmicutes, and Bacteroidetes. Notably, the Pb(II) adsorption onto the V-PVC surfaces was increased, but the adsorption capacities of Pb(II) on Bio-PVC were suppressed with increasing HA. With the co-existence of HA, the increasing complexation and electrostatic attraction had attributed to the increased Pb(II) adsorption ability on V-PVC. Except for its competitive ability, HA has a shield effect which decreases the sorption sites on Bio-PVC. Overall, our findings provide a better understanding of the HA effect on the adsorption mechanism of heavy metals onto MPs in aquatic ecosystems.

Mesoporous Ag-functionalized magnetic activated carbon-based agro-waste for efficient removal of Pb(II), Cd(II), and microorganisms from wastewater

Herein, eco-friendly mesoporous magnetic activated carbon-based agro-waste nanosorbents incorporating antimicrobial silver nanoparticles (Mag@AC1-Ag and Mag@AC1-Ag) have been prepared. Various techniques (XRD, SEM/EDX, TEM, FTIR, and BET analysis) were employed to characterize the prepared nanosorbents before being utilized as novel nanosorbents to remove Pb+2 and Cd+2 ions. Mag@AC1-Ag and Mag@AC1-Ag exhibited rapid and excellent uptake of Pb+2 and Cd+2. The pseudo-second-order kinetics and the Langmuir isotherm are more suitable for the explanation of the experimental results. The thermodynamic parameters showed that the Pb+2 and Cd+2 sorption by the nanosorbents was a spontaneous and endothermic reaction. The prepared nanosorbents can be effectively regenerated using HCl and recycled up to the fifth cycle. These nanosorbents' potential uses for eliminating Pb+2 and Cd+2 from real water samples were evaluated. Moreover, the results revealed that both Mag@AC1-Ag and Mag@AC2-Ag exhibited high antimicrobial activity against fecal coliform (gram-negative) and Bacillus subtilis (gram-positive).

Mechanistic insights into the adsorption of endocrine disruptors onto polystyrene microplastics in water

Microplastics and endocrine disruptors (EDs) are contaminants of emerging concerns and ubiquitously present in aquatic ecosystems, establishing interactions that still are the subject of investigation due to their implications in the cotransport of pollutants. Then, we conducted mechanistic studies based on state-of-art computational chemistry methods to quantitatively understand the interaction mechanisms whereby polystyrene micro or nanoplastics (PS-MPs) interact with representative classes of EDs in water (Ethynylestradiol, Estradiol, and Bisphenol A). The results showed that PS-MPs increase their charge distribution when forming microparticles in water, giving a permanent dipole that explains their increasing solubility in aqueous conditions. In agreement with experimental assessments, the PS-MPs favorably adsorb EDs with adsorption energies larger than 15 kcal/mol, even with comparable stability to nanostructured materials for adsorption, removal, and/or analysis of pollutants. The adsorption occurs via physisorption without covalent binding, bond breaking, or structural preparation energies, where the molecular structure of EDs can favor inner or outer surface adsorption depending on the molecular structure of the adsorbates. A balanced contribution of dispersion and electrostatic stabilizing effects determines the interaction mechanisms, accounting for a whole contribution of 88-90%. The electrostatic contribution emerges from the favorable alignment of the PS-MPs and EDs dipoles upon interaction due to the mild charge transfer between them in solution. In contrast, the dispersion contribution emerges from electron-electron interactions due to the permanent dipoles in adsorbates and adsorbents. Furthermore, thermochemical analyses clarify the role of temperature and pressure effects on the relative adsorption stability among EDs in aquatic environments. Therefore, modeling the adsorption process contributes to new knowledge on the sorption properties of PS-MPs, providing a mechanistic basis to understand the cotransport of pollutants in water environments and their impacts on environmental pollution.

Total organic carbon content as an index to estimate the sorption capacity of micro- and nano-plastics for hydrophobic organic contaminants

The worldwide existing micro- and nano-plastics (MNPs) showed high sorption capacity for hydrophobic organic contaminants (HOCs), and thus leading to change of the environmental behaviors and fates of HOCs. However, there is a lack of general index for evaluating the sorption capacity of MNPs for HOCs. Herein, we investigated the sorption of chlorobenzene, naphthalene and phenanthrene to 10 MNPs of different polymer types with and without UV-aging, respectively. It was found that the sorption was well fitted by Freundlich isotherm model with coefficients R² in the range of 0.892-1.00, and aging of most MNPs resulted in decreased sorption capacity for naphthalene and phenanthrene but slightly increased sorption capacity for chlorobenzene. More importantly, for the 8 MNPs commonly present in the environment and with measured total organic carbon (TOC) covering the range of 23.0-91.9%, the logarithm sorption constant (logK_d) values of the studied HOCs positively correlated with TOC contents of MNPs, with a good determination coefficient (R²) of 0.923 for naphthalene, 0.694 for chlorobenzene, and 0.565 for phenanthrene. Our study demonstrated that the TOC content of MNPs is a good index for estimating the contribution of total MNPs to the sorption of nonpolar HOCs in the environmental media.

Adsorption of nonylphenol on coastal saline soil: Will microplastics play a great role?

Microplastics widely exist in diverse matrices to become important hosts of pollutants. Little information regarding adsorption of emerging contaminants on coastal saline soils influenced by co-existing microplastics is available. Thus, the adsorption behaviors of nonylphenol (NP) on coastal saline soil influenced by microplastics were discussed. Polyvinyl chloride (PVC, 4.7 mm), polyethylene (4.85 mm), and polypropylene (4.51 mm) with addition dose of 10% were used to discuss the effect of microplastic type on adsorption of NP by coastal saline soil while PVC samples with size of 4.7 mm and 0.11 mm were used to explore the effect of microplastic size on NP adsorption. The NP adsorption capacity of the saline soil containing 10% of PVC (4.7 mm) was twice that of soil without PVC. Smaller-size PVC (0.11 mm) with addition amount of 10% enhanced the NP adsorption capacity of the coastal saline soil by 117% to reach 8.91 μg g^-1. The desorption capacity of NP on saline soil decreased from 40% to 30% of total adsorption capacity with co-existing PVC. Adsorption/desorption kinetics of NP on coastal saline soil with PVC microplastics could be well explained by pseudo second order model while Freundlich model could better fit the isotherm data of NP adsorption/desorption to show possible occurrence of the multiple-layer adsorption. This study will provide new information regarding the environmental behaviors of typical emerging contaminants on coastal saline soil containing microplastics.

Interactions of microplastics and soil pollutants in soil-plant systems

In recent years, increasing studies have been reported on characterization and detection of microplastics (MPs), and their interactions with organic pollutants (OPs) and heavy metals (HMs) in soils. However, a comprehensive review on the characteristics and factors that influence MPs distribution in soils, the sorption characteristics and mechanisms of soil contaminants by MPs, especially the interactions of MPs and their complexes with pollutants in the soil-plant systems remains rarely available at present. This review focuses on the sorption features and mechanisms of pollutants by MPs in soil and discussed the effects of MPs and their complexing with pollutants on soil properties, microbe and plants. The polarity of MPs significantly influenced the sorption of OPs, and different sorption mechanisms are involved for the hydrophobic and hydrophilic OPs. The sorption of OPs on MPs in soils is different from that in water. Aging of MPs can promote the sorption and migration of contaminants. The enhanced effects of biofilm in microplastisphere on the sorption of pollutants by MPs are critical, and interactions of soil environment-MPs-microbe-HMs-antibiotics increase the potential pathogens and larger release of resistance genes. The coexistence of HMs and MPs affected the growth of plants and the uptake of HMs and MPs by the plants. Moreover, the type, dose, shape and particle size of MPs have important influences on their interactions with pollutants and subsequent effects on soil properties, microbial activities and plant growth. This review also pointed out some knowledge gaps and constructive countermeasures to promote future research in this field.

A comparative study on the distribution behavior of microplastics through FT-IR analysis on different land uses in agricultural soils

Plastic materials have been variously exposed to arable land for decades through soil mulching, plastic housing, and sewage sludge composting. Their mechanical abrasion and biochemical degradation induce the proliferation of myriad microplastics that can further be broken into smaller nano-sized pieces that can be further accumulated in living organisms (including soil invertebrates, fruits, and vegetables); they can also be widely dispersed in neighboring environments. Despite the intensive use of plastics in agriculture, little is known about their origin of occurrence and environmental fate, especially with a size below 100 μm. Therefore, in this study, microplastics with a size in the range of 20-2,000 μm were investigated in soil samples obtained from three different conditions of land uses: tilled with plastic mulch, bare ground (i.e., uncultivated land), and in between the greenhouses of the farmland D located in Namyangju-si, Gyeonggi-do, Republic of Korea. They were primarily identified using Fourier transform infrared (FT-IR) spectroscopy coupled with a microscope. Prior to performing the analysis, microplastic extraction from the soil samples was validated using standardized high-density polyethylene (HDPE) microplastics of various sizes ranging from 20 to 500 μm. As a result, the number of microplastics was estimated to be (241 ± 52), (195 ± 37), and (306 ± 56) particles per kg of dry soil in tillage, bare ground, and in between greenhouses, respectively. They consist of polyethylene (PE), polypropylene (PP), and poly(ethylene terephthalate) (PET), which are the basic constituents of commonly used agricultural products. The particle size distribution depends on the type of plastic, the time elapsed since their usage, and the degree and duration of environmental exposure; the plastic particle sizes were smaller in tillage and around the greenhouses since agricultural films have been weathered for a long time, whereas those with relatively large sizes were found in the uncultivated.

Transport of emerging organic ultraviolet (UV) filters in ceramic membranes: Role of polyethylene (PE) microplastics

Microplastics can be considered potential carriers of emerging organic ultraviolet (UV) filters due to their considerable adsorption capacity in wastewater treatment. The adsorption behavior of organic UV filters, which are commonly contained in personal care products to preserve the skin against UV radiation, onto polyethylene (PE) microplastics were systematically studied to investigate their combined effects. Kinetics and isotherm analyses revealed that the adsorption of four organic UV filters onto PE microplastic surfaces followed a multi-rate and a heterogeneous multi-layer pattern. Several factors including salinity, microplastic size, and dosage also influenced the adsorption efficiency due to hydrophobic interactions. A bench-scale cross-flow ceramic membrane filtration experiment was investigated to evaluate the role of PE microplastics on the retention performance of organic UV filters. The retentions for organic UV filters were 34.2%-37.8% in the non-existence of PE microplastics. Conversely, organic UV filter retentions were significantly increased up to 82.2%-97.9% when they were adsorbed onto the PE microplastics, which were almost completely retained by the ceramic membrane. Therefore, organic UV filters can likely migrate and eventually be carried by PE microplastics, thus increasing the retention of both emerging organic UV filters and microplastics prior to discharge from wastewater treatment facilities.

A critical review on interaction of microplastics with organic contaminants in soil and their ecological risks on soil organisms

The pollution of microplastics (MPs) in soil has become a global environmental problem. Due to high sorption capacity and persistence in environment, the MPs exhibit combined effects with organic pollutants in soil, thereby posing a potential risk to soil ecology and human health. However, limited reviews are available on this subject. Therefore, in response to this issue, this review provides an in-depth account of interaction of MPs with organic contaminants in soil and the combined risks to soil environment. The sorption of organic contaminants onto MPs is mainly through hydrophobic and π-π interactions, hydrogen bonding, pore filling and electrostatic and van der Waals forces. The intrinsic characteristics of MPs, organic contaminants and soil are the key factors influencing the sorption of organic pollutants onto MPs. Importantly, the presence of MPs changes the sorption, degradation and transport behaviors of organic contaminants in soil, and affects the toxic effects of organic contaminants on soil organisms including animals, plants and soil microorganisms through synergistic or antagonistic effects. Source control, policy implementation and plastic removal are the main preventive and control measures to reduce soil MPs pollution. Finally, priorities for future research are proposed, such as field investigations of co-pollution, contribution of plastisphere to organic contaminant degradation, and mechanisms of MPs effects on organic contaminant toxicity.

Microplastics mulch film affects the environmental behavior of adsorption and degradation of pesticide residues in soil

Plastic pollution in the soil ecosystem is currently receiving worldwide attention. However, little is known whether the presence of microplastics (MPs) in soil will affect the environmental behavior of pesticide residues in soil. Here, the effect of the addition of new mulch MPs (New-MPs), aged mulch MPs (Aged-MPs) and biodegradable mulch MPs (BioD-MPs) on the adsorption and degradation behaviors of two pesticides (imidacloprid and flumioxazin) in soil was investigated. Three MPs slowed down rapid adsorption stage of pesticides in soil and delayed the time to reach adsorption equilibrium. Adsorption rates: Soil > Soil + New-MPs > Soil + Aged-MPs > Soil + BioD-MPs. Three MPs enhanced the adsorption strength of the soil system for the two pesticides, and the aging treatment of the MPs enhanced this effect. Three MPs affected the degradation process of the two pesticides. New-MPs promoted the degradation of two pesticides imidacloprid and flumioxazin, and the degradation half-lives were shortened to 0.93 and 0.85 times, respectively; while Aged-Mps and BioD-MPs delayed the degradation process of two pesticides, and the degradation half-lives were extended to 1.64 times and 1.21 times, respectively. The effect was more significant with the increase of MPs and pesticides concentration. Pesticide polarity, surface structure and functional groups of MPs are potentially important reasons for the differences in adsorption and degradation of MPs-soil systems. Our findings provide a deep insight into understanding the mechanism of interaction between MPs and pesticide residues in soil environment.

Tracking microplastics biodegradation through CO2 emission: Role of photoaging and mineral addition

Once microplastics (MPs) enter the terrestrial ecosystem, they may affect the assessment of soil carbon storage and the fluxes of greenhouse gases. This study showed microbial incubation diminished the size and dissolved organic carbon (DOC) content of MPs and introduced more oxygen-containing functional groups to MPs potentially through microbial colonization. The aged MPs generally showed higher carbon mineralization ratio (0.010-0.876 %) than the pristine MPs (0.007-0.189 %), which was supported by their higher enzyme activities and DOC content. Interestingly, four model minerals increased the DOC release and CO₂ emission from MPs by altering MPs physicochemical properties and shaping the habitat for microbial growth. The higher enzyme activities in mineral artificial soils, except for montmorillonite, served as a potential valid explanation for their higher mineralization. The high CO₂ emission but low enzyme activity in montmorillonite artificial soil was due to most DOC being already mineralized. Aging and minerals altered the microflora and enhanced the expression of some C metabolism- and N-related functional genes, which supplemented the cause of higher CO₂ and N₂O emissions from the corresponding artificial soils. Overall, the increased biomineralization of MPs carbon by minerals was divergent from the protective role of minerals on soil organic carbon.

Split aptamer remodeling-initiated target-self-service 3D-DNA walker for ultrasensitive detection of 17β-estradiol

DNA walker machines, as one of the dynamic DNA nanodevices, have attracted extensive interest in the field of analysis due to their inherent superiority. Herein, we reported a split aptamer remodeling-initiated target-self-service 3D-DNA walker for ultrasensitive, specific, and high-signal-background ratio determination of 17β-estradiol (E2) in food samples. Two split probes (STWS-a and STWS-b) were rationally designed that can undergo structural reassembled to serve as walking strands (STWS) under the induction of the target. Meanwhile, an intact E6-DNAzyme region was formed and activated at the tail of STWS. The activated E6-DNAzyme then continuously drives the 3D-DNA walker for signal amplification and specific detection of E2. Under optimal conditions, the proposed DNA walker-based biosensor exhibited excellent linearity in the range of 1 pM to 50 nM with a low limit of detection (LOD) of 0.28 pM, and good precision (2.7%) for 11 replicate determinations of 1 nM of E2. Furthermore, the developed DNA walker-based biosensor achieved excellent sensitive analysis of E2 in the complex food matrix with recoveries of 95.6-106.5%. This newly proposed split aptamer-based strategy has the advantages of ultrasensitive, high signal-to-background ratio, and high stability. Noteworthy, the successful operation of the DNA walker initiated by the split aptamer expands the principles of DNA walker design and provides a universal signal amplification platform for trace analysis.

Sorption of pharmaceuticals over microplastics' surfaces: interaction mechanisms and governing factors

Microplastics are one of the emerging and ubiquitous environmental pollutants. Recent studies have proven their co-existence with pharmaceuticals in the environment wherein microplastics act as a potential vector for the transportation of pharmaceuticals. Both microplastics and pharmaceuticals are charged moieties enriched with diverse functional groups resulting in the possibility of multiple interactions. Major interactions could be electrostatic, hydrogen bonding, and hydrophobic, while minor interactions may occur through π-π interaction, cationic bridging mechanism, van der Waals interaction, partition, and pore-filling mechanism. These interactions have both short- and long-term effects over pharmaceutical sorption on microplastics and possibly, ensuing toxicity. This review analyses and summarises the currently reported interactions between microplastic particles and pharmaceuticals as well as establishes the link to various factors affecting the process, viz. pH, salinity, dissolved organic matter, and physiochemical properties of microplastics.

Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

As emerging contaminants, microplastics (MPs) have attracted global attention. They are a potential risk to organisms, ecosystems and human health. MPs are characterized by small particle sizes, weak photodegradability, and are good environmental carriers. They can physically adsorb or chemically react with organic, inorganic and bio-pollutants to generate complex binary pollutants or change the environmental behaviors of these pollutants. We systematically reviewed the following aspects of MPs: (i) Adsorption of heavy metals and organic pollutants by MPs and the key environmental factors affecting adsorption behaviors; (ii) Enrichment and release of antibiotic resistance genes (ARGs) on MPs and the effects of MPs on ARG migration in the environment; (iii) Formation of "plastisphere" and interactions between MPs and microorganisms; (iv) Ecotoxicological effects of MPs and their co-exposures with other pollutants. Finally, scientific knowledge gaps and future research areas on MPs are summarized, including standardization of study methodologies, ecological effects and human health risks of MPs and their combination with other pollutants.

Variations in the life-cycle parameters and population growth of rotifer Brachionus plicatilis under the stress of microplastics and 17β-estradiol

The toxic effects of microplastics (MPs) on biota are related to their particle size. In addition, MPs could adsorb ambient pollutants in water, which increase the threat of MPs to organisms. In this study, the effects of different particle sizes and concentrations of MPs on the life-cycle parameters and population growth of rotifer Brachionus plicatilis were investigated, and the combined effects of MPs and 17β-estradiol (E2) on rotifers were studied. Results showed small particle size (50 nm) MPs had negative effects on the lifespan, time to first batch of eggs, fecundity, and population growth rate of rotifers, which were dose-dependent, but large (100 nm and 500 nm) MPs were not. In addition, both life-cycle parameters and the population growth of rotifers were not affected by E2. However, the combination effects of different particle sizes of MPs and E2 on the lifespan, reproductive period, offspring per female, and population growth of rotifers were significant. Therefore, rotifers were more vulnerable to smaller particle MPs, and the coexistence of MPs and other environmental pollutants posed a serious threat to rotifers.

A review of microplastics in soil: Occurrence, analytical methods, combined contamination and risks

Microplastics (MPs) pollution is becoming a serious environmental issue of global concern. Currently, the effects of MPs on aquatic ecosystems have been studied in detail and in depth from species to communities. However, soils, the largest reservoir of MPs, have been less studied, and little is known about the occurrence, environmental fate and ecological impacts of MPs. Therefore, based on the existing knowledge, this paper firstly focused specifically on the main sources of soil MPs pollution and explored the main reasons for their strong heterogeneity in spatial distribution. Secondly, as a primary prerequisite for evaluating MPs contamination, we systematically summarized the analytical methods for soil MPs and critically compared the advantages and disadvantages of the different methods in the various operational steps. Furthermore, this review highlighted the combined contamination of MPs with complex chemical contaminants, the sorption mechanisms and the associated factors in the soil. Finally, the risks posed by MPs to soil, plants, the food chain and even humans were outlined, and future directions for soil MPs research were proposed, while the urgent need for a unified approach to MPs extraction and identification was emphasized. This study provides a theoretical reference for a comprehensive understanding of the separation of soil MPs and their ecological risk as carriers of pollution.

Incubation habitats and aging treatments affect the formation of biofilms on polypropylene microplastics

Microbial colonization and biofilm formation associated with microplastics (MPs) have recently attracted wide attention. However, little is known about the effect of MP aging and different exposed habitats on biofilm formation and associated microbial community characteristics. To obtain a comprehensive understanding, virgin and aged polypropylene MPs were selected as attachment substrates and exposed to different aquatic habitats (marine, estuary, and river). The results showed that the aging process could destroy surface structure and increase oxygen-containing groups of MPs. The total biomass of the biofilms, attached-bacterial OTU numbers, and α diversities increased with exposure time. The biofilms biomass and α diversity of MPs in the river were significantly higher than those in the marine and estuary habitats, and temperature and salinity were primary factors affecting microbial colonization. Bacterial communities in MP-attached biofilms were significantly different from those in surrounding water. Microorganisms tend to adhere to aged MPs, and especially, genes related to human pathogens were significantly expressed on aged MPs, suggesting a potential ecological and health risk of aged MPs in aquatic ecosystems. Our results showed that aged MPs and different habitats have an important influence on microbial colonization, and the weathering process can accelerate biofilm formation on MPs.

The Inhibition of Microcystin Adsorption by Microplastics in the Presence of Algal Organic Matters

Microplastics (MPs) could act as vectors of synthetic chemicals; however, their influence on the adsorption of chemicals of natural origin (for example, MC-LR and intracellular organic matter (IOM), which could be concomitantly released by toxic Microcystis in water) is less understood. Here, we explored the adsorption of MC-LR by polyethylene (PE), polystyrene (PS), and polymethyl methacrylate (PMMA). The results showed that the MPs could adsorb both MC-LR and IOM, with the adsorption capability uniformly following the order of PS, PE, and PMMA. However, in the presence of IOM, the adsorption of MC-LR by PE, PS, and PMMA was reduced by 22.3%, 22.7% and 5.4%, respectively. This is because the benzene structure and the specific surface area of PS facilitate the adsorption of MC-LR and IOM, while the formation of Π-Π bonds favor its interaction with IOM. Consequently, the competition for binding sites between MC-LR and IOM hindered MC-LR adsorption. The C=O in PMMA benefits its conjunction with hydroxyl and carboxyl in the IOM through hydrogen bonding; thus, the adsorption of MC-LR is also inhibited. These findings highlight that the adsorption of chemicals of natural origin by MPs is likely overestimated in the presence of metabolites from the same biota.

Investigation of the adsorption behavior of Pb(II) onto natural-aged microplastics as affected by salt ions

In this study, the adsorption behavior of Pb(II) on natural-aged and virgin microplastics in different electrolyte solutions was investigated. The results demonstrated that natural-aged microplastics exhibited higher adsorption capacity for Pb(II) compared to virgin ones, and the addition of CaCl₂ strongly inhibited the adsorption amount of Pb(II). The adsorption kinetics of Pb(II) adsorption were better fitted by the pseudo-second order model and Elovich equation, and were slowed down greatly at higher ionic strength. The rate-limiting steps of adsorption process were dominated by intra-particle diffusion. The adsorption isotherm of Pb(II) onto microplastics affected by salt ions can be well described by Freundlich model, the greater adsorption efficiency of natural-aged microplastics proved that adsorption process was multilayer and heterogeneous. In addition, pH significantly influenced the adsorption of Pb(II) due to the changes electrostatic interactions. The effect of fulvic acid in the electrolyte solutions was also revealed and attributed to the complexation with Na⁺ and Ca²⁺. Furthermore, the higher pH and ionic strength in different environmental water dramatically decreased adsorption capacity onto microplastics. Finally, it's confirmed that the adsorption mechanisms affected by salt ions mainly involve electrostatic interaction, surface complexation, and ionic exchange. These findings indicate that salt ions exert an important influence on the adsorption of heavy metals for MPs, which should be further concerned.

Interactions of microplastics and main pollutants and environmental behavior in soils

Microplastics (MPs) are emerging global contaminants, attracting more and more attention because of their difficulty in degradation, extensive and persistent pollution. In freshwater environment, especially in the ocean, they have become a global, public and even political research hotspot. However, the distribution, fate and ecological hazards of MPs in agricultural land and other soils have not been explored fully. Although the occurrence of MPs in different habitats has been reviewed at home and abroad, little attention has been paid to its environmental behavior, ecotoxicology and interaction with biological and chemical pollutants in soil. This review summaries the research progress on the source, accumulation, degradation and migration of MPs in soil, the potential risks of ecological environment and food chain. In order to provide theoretical basis and practical suggestions for related research and regulatory countermeasures, the detection and treatment methods and mechanism of microplastics in soil need to be further explored.

Soil plastisphere: Exploration methods, influencing factors, and ecological insights

Microplastic (MP), an emerging contaminant, is globally prevalent and poses potential environmental threats and ecological risks to both aquatic and terrestrial ecosystems. When MPs enter into natural environments, they may serve as artificial substrates for microbial colonization and plastisphere formation, providing new ecological niches for microorganisms. Recent studies of the plastisphere have focused on aquatic ecosystems. However, our understanding of the soil plastisphere e.g. its formation process, microbial ecology, co-transport of organic pollutants and heavy metals, and effects on biogeochemical processes is still very limited. This review summarizes latest methods used to explore the soil plastisphere, assesses the factors influencing the microbial ecology of the soil plastisphere, and sheds light on potential ecological risks caused by the soil plastisphere. The formation and succession of soil plastisphere communities can be driven by MP characteristics and soil environmental factors. The soil plastisphere may affect a series of ecological processes, especially the co-transport of environmental contaminants, biodegradation of MPs, and soil carbon cycling. We aim to narrow the knowledge gap between the soil and aquatic plastisphere, and provide valuable guidance for future research on the soil plastisphere in MP-contaminated soils.

Research progress of microplastics in soil-plant system: Ecological effects and potential risks

The effect of microplastics on soil ecosystem is a hot topic in recent years. It is increasingly recognized that soil is also an important sink for microplastics in addition to the aquatic environment. This review aims to discuss the direct and indirect effects of microplastics on the soil-plant system, focusing on the effects of microplastics on soil aggregates and soil nutrient cycling as well as the combined effects of microplastics and other pollutants on soil-plant systems. Microplastics have been shown to affect the rooting ability of plants by altering soil bulk density and water-holding capacity, as well as reducing photosynthetic rate by directly interfering with the balance of plant chlorophyll a/chlorophyll b ratios. In addition, microplastics affect the stability of aggregates by interfering with abiotic factors (e.g., sesquioxide and exchangeable cations) or biotic factors (e.g., soil organic matter and organism activities in the soil). Moreover, microplastics may affect soil nutrient cycling by altering the dominant bacteria phyla in the soil or genes and enzymes associated with the carbon, nitrogen, and phosphorus cycle. When microplastics and other pollutants have combined effects on plants, microplastics attached onto the root surface physically hamper the contact of the pollutants with the roots but are more likely to exacerbate the damage of pollutants to plants. Different types, sizes and concentrations of microplastics have different effects on the soil-plant system. Microplastics with similar shape and size to soil particles have less significant effects, while microfibers, small-sized microplastics and biodegradable plastic particles have more significant effects. Finally, this review also provides an outlook for future research.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

Investigation into the impact of aged microplastics on oil behavior in shoreline environments

Understanding the interactions between oil and other particles in shoreline can help determine the environmental risk and cleanup strategy after oil spill. Nevertheless, far less has been known regarding the impact of aged MPs on oil behavior in the shoreline environment. In this study, the aging course of polyethylene (PE) in shaking seawater and ultraviolet (UV) radiation conditions was investigated. The seawater aging mainly affected the physical properties of MPs, increasing its surface pores and hydrophilicity. UV aging significantly affected both the physical and chemical properties of MPs, which increased its hydrophilicity and crystallinity, decreased its mean particle size and introduced oxygen-containing functional groups onto MPs. The two-dimensional correlation spectroscopy (2D COS) analysis confirmed the evolution of oxygen-containing functional groups from C-O to CO. The effects of aged MPs on oil behavior in water-sand system were further explored. The oil remaining percentages were non-linearly changed with the increasing aging degree of MPs. The particle size of the aqueous phase after washing was inversely related to the oil remaining percentage. Further FTIR analysis revealed that C-O and C-H functional groups played an important role in the process of oil adsorbed on MPs.

The effect of UV exposure on conventional and degradable microplastics adsorption for Pb (II) in sediment

Plastic discharged into the environment would break down into microplastics (MPs). However, the possible impact of MPs on heavy metals in the aquatic sediment remains unknown. In order to evaluate the potential role of MPs as carriers of coexisting pollutants, the adsorption capacity of lead ions from sediment onto aged degradable and conventional MPs were investigated as a function of lead ions concentration, contact time, temperature, MPs dosage, aging time, and fulvic acid concentration. MPs were exposed to UV to obtain aged polyethylene (A-PE) and aged polylactic acid (A-PLA). The aging treatment increased the oxygen content, specific surface area and hydrophilicity of MPs. The adsorption capacity of A-PE for Pb(II) in sediment increased from 10.1525 to 10.4642 mg g^-1 with the increasing aging time. However, the adsorption capacity of A-PLA for Pb(II) in sediment decreased from 9.3199 to 8.7231 mg g^-1 with the increasing aging time. The adsorption capacity of MPs in sediment for Pb(II) was in the following order: A-PE > PLA > PE > A-PLA. Fulvic acid could promote the adsorption of Pb(II) by MPs in sediment. These results indicated that the aging process of the plastics in the environment would affect its role as a carrier of coexisting pollutants.

Adsorption mechanism of two pesticides on polyethylene and polypropylene microplastics: DFT calculations and particle size effects

Polyethylene (PE) and polypropylene (PP) microplastics (MPs), as carriers, can bind with pesticides, which propose harmful impacts to aqueous ecosystems. Meanwhile, carbofuran and carbendazim (CBD), two widely used carbamate pesticides, are toxic to humans because of the inhibition of acetylcholinesterase activity. The interaction between two MPs and two pesticides could start in farmland and be maintained during transportation to the ocean. Herein, the adsorption behavior and mechanism of carbofuran and carbendazim (CBD) by PE and PP MPs were investigated via characterization and density functional theory (DFT) simulation. The adsorption kinetic and thermodynamic data were best described by pseudo-second-order kinetics and the Freundlich models. The adsorption behaviors of individual carbofuran/CBD on both MPs were very similar. The CBD adsorption rate and capacity of PE and PP MPs were higher than those of carbofuran. This phenomenon explained the lower negative effects of DOM (oxalic acid, glycine (Gly)) on CBD adsorption relative to those of carbofuran. The presence of oxalic acid and Gly decreased the PE adsorption by 20.40-48.02% and the PP adsorption by 19.27-42.11%, respectively. It indicated the significance of DOM in carbofuran cycling. The adsorption capacities were negatively correlated with MPs size, indicating the importance of specific surficial area. Fourier transformation infrared spectroscopy before and after adsorption suggested that the adsorption process did not produce any new covalent bond. Instead, intermolecular van der Waals forces were one of the primary adsorption mechanisms of carbofuran and CBD by MPs, as evidenced by DFT calculations. Based on the zeta potential, the electrostatic interaction explained the higher adsorption CBD by MPs than carbofuran.