Aquatic toxicity of chemically defined microplastics can be explained by functional additives

Human intake assessment of triclosan associated with the daily use of polypropylene-made antimicrobial food packaging

In this work, we aimed to evaluate human intake of triclosan (TCS) associated with real-life use of different brands of Microban™ microwave-safe food packaging. Calculations were based on: TCS migration data (under the worst-case foreseeable conditions), MPs abundance and TCS bioaccessibility from microplastics (MPs), leached from containers under microwave heating. Bioaccessibility studies were performed with in vitro digestion of MPs, followed by liquid-liquid extraction of TCS from digestive fluids and LC-QqQ-MS analysis yielding values of 46 ± 9%. The estimated weekly intake (EWI) of TCS ranged between 11 and 42 μg/kg body weight/week, with migration being the largest contribution (0.6-2.3 mg/week), compared to leaching of MPs (75-300 μg/week). These values represent a significant source of human exposure to TCS, emphasizing the need to harmonize the ban of TCS in food contact materials worldwide and improve compliance testing of food contact articles, particularly those marketed through online sales platforms.

Comparative assessment of the acute toxicity of commercial bio-based polymer leachates on marine plankton

Conventional plastics have become a major environmental concern due to their persistence and accumulation in marine ecosystems. The development of potential degradable polymers (PBP), such as polyhydroxyalkanoates (PHAs) and polylactic acid (PLA), has gained attention as an alternative to mitigate plastic pollution, since they have the potential to biodegrade under certain conditions, and their production is increasing as replacement of conventional polyolefins. This study aimed to assess and compare the toxicity of leachates of pre-compounding PBP (PLA and the PHA, polyhydroxybutyrate-covalerate (PHBv)) and polypropylene (PP) on five marine planktonic species. A battery of standard bioassays using bacteria, microalgae, sea urchin embryos, mussel embryos and copepod nauplii was conducted to assess the toxicity of leachates from those polymers. Additionally, the presence of chemical additives in the leachates was also verified through GC-MS and LC-HRMS analysis. Results showed that PHBv leachates exhibited higher toxicity compared to other polymers, with the microalgae Rhodomonas salina, being the most sensitive species to the tested leachates. On the other hand, PP and PLA generally displayed minimal to no toxicity in the studied species. Estimated species sensitivity distribution curves (SSD) show that PHBv leachates can be 10 times more hazardous to marine plankton than PP or PLA leachates, as demonstrated by the calculated Hazardous Concentration for 5 % of species (HC5). Qualitative chemical analysis supports the toxicological results, with 80 % of compounds being identified in PHBv leachates of which 2,4,6-trichlorophenol is worth mentioning due to the deleterious effects to aquatic biota described in literature. These findings underscore the fact that whereas environmental persistence can be targeted using PBP, the issue of chemical safety remains unsolved by some alternatives, such as PHBv. Gaining a comprehensive understanding of the toxicity profiles of PBP materials through a priori toxicological risk assessment is vital for their responsible application as alternatives to conventional plastics.

Critical evaluation of hyperspectral imaging technology for detection and quantification of microplastics in soil

In this study, we critically evaluated the performance of an emerging technology, hyperspectral imaging (HSI), for detecting microplastics (MPs) in soil. We examined the technology's robustness against varying environmental conditions in five groups of experiments. Our findings show that near-infrared (NIR) hyperspectral imaging (HSI) effectively detects microplastics (MPs) in soil, though detection efficacy is influenced by factors such as MP concentration, color, and soil moisture. We found a generally linear relationship between the levels of MPs in various soils and their spectral responses in the NIR HSI imaging spectrum. However, effectiveness is reduced for certain MPs, like polyethylene, in kaolinite clay. Furthermore, we showed that soil moisture considerably influenced the detection of MPs, leading to nonlinearities in quantification and adding complexities to spectral analysis. The varied responses of MPs of different sizes and colors to NIR HSI present further challenges in detection and quantification. The research suggests pre-grouping of MPs based on size before analysis and proposes further investigation into the interaction between soil moisture and MP detectability to enhance HSI's application in MP monitoring and quantification. To our knowledge, this study is the first to comprehensively evaluate this technology for detecting and quantifying microplastics.

Marine degradation and ecotoxicity of conventional, recycled and compostable plastic bags

Plastic bags are currently a major component of marine litter, causing aesthetical nuisance, and undesirable effects on marine fauna that ingest them or are entangled. Plastic litter also rises concern on the ecotoxicological effects due to the potential toxicity of the chemical additives leached in aquatic environments. Conventional plastic bags are made of polyethylene, either from first use or recycled, but regulations restricting single-use plastics and limiting lightweight carrier bags (<50 μm thickness) have fostered the replacement of thin PE bags by compostable materials advertised as safer for the environment. In this study, we assess the degradation of commercially available plastic bags in marine conditions at two scales: aquariums (60 days) and outdoors flow-through mesocosm (120 days). Strength at break point and other tensile strength parameters were used as ecologically relevant endpoints to track mechanical degradation. Ecotoxicity has been assessed along the incubation period using the sensitive Paracentrotus lividus embryo test. Whereas PE bags did not substantially lose their mechanical properties within the 60 d aquarium exposures, compostable bags showed remarkable weight loss and tensile strength decay, some of them fragmenting in the aquarium after 3-4 weeks. Sediment pore water inoculum promoted a more rapid degradation of compostable bags, while nutrient addition pattern did not affect the degradation rate. Longer-term mesocosms exposures supported these findings, as well as pointed out the influence of the microbial processes on the degradation efficiency of compostable/bioplastic bags. Compostable materials, in contrast toPE, showed moderate toxicity on sea-urchin larvae, partially associated to degradation of these materials, but the environmental implications of these findings remain to be assessed. These methods proved to be useful to classify plastic materials, according to their degradability in marine conditions, in a remarkably shorter time than current standard tests and promote new materials safer for the marine fauna.

The masking phenomenon of microplastics additives on oxidative stress responses in freshwater food chains

The variability and intrinsic mechanisms of oxidative stress induced by microplastics at different trophic levels in freshwater food chains are not well understood. To comprehensively assess the oxidative stress induced by polystyrene microplastics (PS-MPs) in freshwater food chains, the present study first quantified the oxidative stress induced by PS-MPs in organisms at different trophic levels using factorial experimental design and molecular dynamics methods. Then focuses on analyzing the variability of these responses across different trophic levels using mathematical statistical analysis. Notably, higher trophic level organisms exhibit diminished responses under PS-MPs exposure. Furthermore, the coexistence of multiple additives was found to mask these responses, with antioxidant plastic additives significantly influencing oxidative stress responses. Mechanism analysis using computational chemistry simulation determines that protein structure and amino acid characteristics are key factors driving PS-MPs induced oxidative stress variation in freshwater organisms at different nutrient levels. Increased hydrophobic additives induce protein helicalization and amino acid residue aggregation. This study systematically reveals the variability of biological oxidative stress response under different nutrient levels, emphasizing the pivotal role of chemical additives. Overall, this study offers crucial insights into PS-MPs' impact on oxidative stress responses in freshwater ecosystems, informing future environmental risk assessment.

Do weathered microplastics impact the planktonic community? A mesocosm approach in the Baltic Sea

Microplastics (MPs) are ubiquitous pollutants of increasing concern in aquatic systems. However, little is still known about the impacts of weathered MPs on plankton at the community level after long-term exposure. In this study, we investigated the effects of weathered MPs on the structure and dynamics of a Baltic Sea planktonic community during ca. 5 weeks of exposure using a mesocosm approach (2 m3) mimicking natural conditions. MPs were obtained from micronized commercial materials of polyvinyl chloride, polypropylene, polystyrene, and polyamide (nylon) previously weathered by thermal ageing and sunlight exposure. The planktonic community was exposed to 2 μg L-1 and 2 mg L-1 of MPs corresponding to measured particle concentrations (10-120 μm) of 680 MPs L-1 and 680 MPs mL-1, respectively. The abundance and composition of all size classes and groups of plankton and chlorophyll concentrations were periodically analyzed throughout the experiment. The population dynamics of the studied groups showed some variations between treatments, with negative and positive effects of MPs exhibited depending on the group and exposure time. The abundance of heterotrophic bacteria, pico- and nanophytoplankton, cryptophytes, and ciliates was lower in the treatment with the higher MP concentration than in the control at the last weeks of the exposure. The chlorophyll concentration and the abundances of heterotrophic nanoflagellates, Astromoeba, dinoflagellate, diatom, and metazooplankton were not negatively affected by the exposure to MPs and, in some cases, some groups showed even higher abundances in the MP treatments. Despite these tendencies, statistical analyses indicate that in most cases there were no statistically significant differences between treatments over the exposure period, even at very high exposure concentrations. Our results show that weathered MPs of the studied conventional plastic materials have minimal or negligible impact on planktonic communities after long-term exposure to environmentally relevant concentrations.

A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS

BACKGROUND

Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination.

RESULTS

Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 μg g-1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer.

SIGNIFICANCE

This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples.

Effects of primary leachates of conventional and alternative plastics in Cyprinodon variegatus fish larvae: Endocrine disruption and toxicological responses

The inclusion of hazardous substances in the formulation of plastics raises significant concerns, particularly, if those substances are released as primary leachates during plastic degradation and/or fragmentation. In this sense, the production of degradable plastics holding deleterious additives can increase the release of harmful substances into the environment. Additionally, the effects of primary leachates of "eco-friendly" materials remain unexplored. To address this, we performed exposures to primary leachates of alternative polymers, and commercial bags to verify possible responses associated with endocrine disruption and/or activation of the detoxification pathway in larvae of the marine fish model Cyprinodon variegatus. The chemical characterization evidenced a great number of additives in the formulation of the materials analyzed in this study. Those include, except for the PLA sample, relevant levels of the hazardous phthalates DEHP and DiBP. Regarding the effects on marine fish larvae, exposure to leachates from alternative polymers (10 g/L) PHB and PHBV produced remarkable mortality (100%). While the exposure to bag leachates of all tested materials (1 and 10 g/L) produced alterations in biomarkers for steroidogenic and detoxification pathways. To a lesser extent (10 g/L), three materials produced significant alterations in estrogenic biomarkers (Home-compostable bag 1, LDPE and Recycled PE bags). Although the alterations in gene expression were not directly correlated to the amount of DEHP or DiBP, we can conclude that primary leachates of "eco-friendly" bags are harmful to marine vertebrates.

Development of a dispersive liquid-liquid microextraction method for the determination of plastic additives in seawater

A method using dispersive liquid-liquid microextraction (DLLME) prior to high performance liquid chromatography-diode array detection (HPLC-DAD) was developed to determine seven additives from the plastics industry (butylated hydroxytoluene, diisodecyl phthalate, irgafos 168, lawsone, quercetin, triclosan and vitamin E) in seawater samples. These compounds can reach seawater due to direct discharge from wastewater treatment plants and leaching from plastics and microplastics. The extraction was performed using 25 mL of seawater, 500 μL of 1-octanol (extraction solvent) and a stirring step instead of dispersive solvent. Additive concentrations were determined by LC-DAD on a C18 column with a mobile phase of acetonitrile and phosphoric acid aqueous solution (pH 3.5) by gradient elution. The analytical recoveries ranged from 82 to 93% for all compounds, except for lawsone (60%). Repeatability and intermediate precision were adequate with RSD < calculated values following the Horwitz equation at the concentration levels evaluated (0.06 and 0.24 mg L-1). All additives exhibited linear matrix calibration curves (R2 > 0.99). Detection limits ranged from 0.009 to 0.028 mg L-1 and quantification limits ranged from 0.027 to 0.084 mg L-1. Finally, the application of the method to real samples verified the method as accurate and applicable to seawater.

Microplastic interactions in the agroecosystems: methodological advances and limitations in quantifying microplastics from agricultural soil

The instantaneous growth of the world population is intensifying the pressure on the agricultural sector. On the other hand, the critical climate changes and increasing load of pollutants in the soil are imposing formidable challenges on agroecosystems, affecting productivity and quality of the crops. Microplastics are among the most prevalent pollutants that have already invaded all terrestrial and aquatic zones. The increasing microplastic concentration in soil critically impacts crop plants growth and yield. The current review elaborates on the behaviors of microplastics in soil and their impact on soil quality and plant growth. The study shows that microplastics alter the soil's biophysical properties, including water-holding capacity, bulk density, aeration, texture, and microbial composition. In addition, microplastics interact with multiple pollutants, such as polyaromatic hydrocarbons and heavy metals, making them more bioavailable to crop plants. The study also provides a detailed insight into the current techniques available for the isolation and identification of soil microplastics, providing solutions to some of the critical challenges faced and highlighting the research gaps. In our study, we have taken a holistic, comprehensive approach by analysing and comparing various interconnected aspects to provide a deeper understanding of all research perspectives on microplastics in agroecosystems.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Reducing Gut Dissolution of Zinc Oxide Nanoparticles by Secondary Microplastics with Consequent Impacts on Barnacle Larvae

The environmental impact of sunscreen is a growing concern, yet the combined effects of its components on marine animals are poorly understood. In this study, we investigated the combined effects of sunscreen-extracted zinc oxide nanoparticles (nZnO) and microplastics (MPs) on the development of barnacle larvae, focusing on the different roles played by primary microplastics (PMPs) and secondary microplastics (SMPs) generated through the phototransformation of PMPs. Our findings revealed that a lower concentration of nZnO (50 μg/L) enhanced molting and eye development in barnacle larvae, while a higher concentration (500 μg/L) inhibited larval growth. Co-exposure to PMPs had no significant effect on larval development, whereas SMPs mitigated the impact of nZnO by restricting the in vivo transformation to ionic Zn. Accumulated SMPs reduced gut dissolution of nZnO by up to 40%, lowering gut acidity by 85% and buffering the in vivo dissolution of nZnO. We further identified a rough-surfaced Si-5 fragment in SMPs that damaged larval guts, resulting in decreased acidity. Another Si-32 resisted phototransformation and had no discernible effects. Our study presented compelling evidence of the impacts of SMPs on the bioeffect of nZnO, highlighting the complex interactions between sunscreen components and their combined effects on marine organisms.

Insight into the chemical transformation and organic release of polyurethane microplastics during chlorination

The ubiquitous occurrence of microplastics in water and wastewater is a growing concern. In this study, the chemical transformation and organic release of virgin and UV-aged thermoplastic polyurethane (TPU) polymers during chlorination were investigated. As compared to virgin TPU polymer, the UV-aged TPU polymer exhibited high chlorine reactivity with noticeable destruction on its surface functional groups after chlorination, which could be ascribed to the UV-induced activation of hard segment of TPU backbone and increased contact area. The concentrations of leached organics increased by 1.6-fold with obviously high abundances of low-molecular-weight components. Additives, monomers, compounds relating to TPU chain extension, and their chlorination byproducts contributed to the increased organic release. Meanwhile, the formation of chloroform, haloacetic acids, trichloroacetaldehyde, and dichloroacetonitrile increased by 3.8-, 1.7-, 4.9-, and 2.4-fold, respectively. Two additives and six chlorination byproducts in leachate from chlorinated UV-aged TPU were predicted as highly toxic, e.g., butyl octyl phthalate, palmitic acid, 2,6-di-tert-butyl-1,4-benzoquinone, and chlorinated aniline. Evaluated by human hepatocarcinoma cells, the 50% lethal concentration factor of organics released from chlorinated UV-aged TPU was approximately 10% of that from its virgin counterpart, indicating a substantially increased level of cytotoxicity. This study highlights that the release of additives and chlorination byproducts from the chemical transformation of UV-aged microplastics during chlorination may be of potentially toxic concern.

Understanding Interface Exchanges for Assessing Environmental Sorption of Additives from Microplastics: Current Knowledge and Perspectives

Although the impacts of plastic pollution have long been recognized, the presence, pervasiveness, and ecotoxicological consequences of microplastic-i.e., plastic particles < 5 mm-contamination have only been explored over the last decade. Far less focus has been attributed to the role of these materials and, particularly, microplastics, as vectors for a multitude of chemicals, including those (un)intentionally added to plastic products, but also organic pollutants already present in the environment. Owing to the ubiquitous presence of microplastics in all environmental matrices and to the diverse nature of their chemical and physical characteristics, thoroughly understanding the mechanistic uptake/release of these compounds is inherently complex, but necessary in order to better assess the potential impacts of both microplastics and associated chemicals on the environment. Herein, we delve into the known processes and factors affecting these mechanisms. We center the discussion on microplastics and discuss some of the most prominent ecological implications of the sorption of this multitude of chemicals. Moreover, the key limitations of the currently available literature are described and a prospective outlook for the future research on the topic is presented.

Leaching of chemicals from microplastics: A review of chemical types, leaching mechanisms and influencing factors

It is widely known that microplastics are present everywhere and they pose certain risks to the ecosystem and humans which are partly attributed to the leaching of additives and chemicals from them. However, the leaching mechanisms remain insufficiently understood. This review paper aims to comprehensively and critically illustrate the leaching mechanisms in biotic and abiotic environments. It analyzes and synthesizes the factors influencing the leaching processes. It achieves the aims by reviewing >165 relevant scholarly papers published mainly in the past 10 years. According to this review, flame retardants, plasticizers and antioxidants are the three main groups of additives in microplastics with the potentials to disrupt endocrine functions, reproduction, brain development and kidney functions. Upon ingestion, the MPs are exposed to digestive fluids containing enzymes and acids which facilitate their degradation and leaching of chemicals. Fats and oils in the digestive tracts also aid the leaching and transport of these chemicals particularly the fat-soluble ones. Leaching is highly variable depending on chemical properties and bisphenols leach to a larger extent than other endocrine disrupting chemicals. However, the rates of leaching remain poorly understood, owing probably to multiple factors at play. Diffusion and partitioning are two main mechanisms of leaching in biotic and abiotic environments. Photodegradation is more predominant in the latter, generating reactive oxygen species which cause microplastic aging and leaching with minimal destruction of the chemicals leached. Effects of microplastic sizes on leaching are governed by Sherwood number, thickness of aqueous boundary layer and desorption half-life. This review contributes to better understanding of leaching of chemicals from microplastics which affect their ecotoxicities and human toxicity.

Risks Associated with the Presence of Polyvinyl Chloride in the Environment and Methods for Its Disposal and Utilization

Plastics have recently become an indispensable part of everyone's daily life due to their versatility, durability, light weight, and low production costs. The increasing production and use of plastics poses great environmental problems due to their incomplete utilization, a very long period of biodegradation, and a negative impact on living organisms. Decomposing plastics lead to the formation of microplastics, which accumulate in the environment and living organisms, becoming part of the food chain. The contamination of soils and water with poly(vinyl chloride) (PVC) seriously threatens ecosystems around the world. Their durability and low weight make microplastic particles easily transported through water or air, ending up in the soil. Thus, the problem of microplastic pollution affects the entire ecosystem. Since microplastics are commonly found in both drinking and bottled water, humans are also exposed to their harmful effects. Because of existing risks associated with the PVC microplastic contamination of the ecosystem, intensive research is underway to develop methods to clean and remove it from the environment. The pollution of the environment with plastic, and especially microplastic, results in the reduction of both water and soil resources used for agricultural and utility purposes. This review provides an overview of PVC's environmental impact and its disposal options.

Bacterial diversity of biofilms on polyhydroxybutyrate exposed to marine conditions: Ex-situ vs. in-situ tests

Biofilms form on any available surface and, depending on the characteristics of the material and the environmental conditions, biodegradation can take place. We compared the bacterial composition of polyhydroxybutyrate (PHB)-related biofilm communities from marine ex-situ and in-situ tests to assess the differences in diversity and abundance between these two biofilms. This comparison will help to better assess the transferability of tank tests to real-life scenarios. The in-situ tests were set up in the Mediterranean Sea on the Island of Elba, Italy where PHB-tensile bars were lodged in the sediments. This created a water-exposed aerobic and mud-planted anaerobic scenario. The ex-situ tests were modeled after in-situ tests and performed in temperature-controlled tanks. The PHB-related biofilms were harvested after 240 days of exposure along with planktonic bacteria, and particle- and sediment-related biofilm. The bacterial composition was elucidated using 16S rDNA sequencing. Biofilms harvested from the in-situ test were more diverse, less even, and contained more rare species compared to biofilms from the ex-situ test. The PHB-related biofilm was characterized by a higher abundance of the bacterial order Desulfobacterales. The composition of PHB-related biofilm varied significantly between the two tests and between aerobic and anaerobic conditions. The composition of PHB-related biofilm was significantly different from planktonic bacteria, particle, and sediment-related biofilm, showing the influence of PHB on the biofilm composition. Thus, the ex-situ tank test for PHB degradation cannot, in terms of bacterial composition, simulate the in-situ conditions to their full extent.

Adverse effects of plastic leachate and its component 2,4-DTBP on the early development of zebrafish embryos

Plastic waste has become a global environmental problem threatening the health of aquatic organisms especially via leachate. In this study, the test of zebrafish embryo showed adverse effects of leachate from some agricultural mulching films after UV light aging for 60 h. A typical phenolic antioxidant 2,4-di-tert-butylphenol (2,4-DTBP) was detected in the leachate and tested further for the zebrafish embryo biotoxicity. The microplastic leachate (6, 8 g/L, mass concentration measured by weight of plastic) increased the death and malformation rates, and reduced the hatching rate, heart rate, and body length of zebrafish larvae in the 96-hour early development period. Similar adverse effects were also caused by the 2,4-DTBP (0.01, 0.1, 1.0 mg/L, corresponding to 0.049, 0.49, and 4.85 μM) to some degree but could not completely explain the significant influences caused by the plastic leachate. Transcriptome analysis of zebrafish embryos exposed to the 2,4-DTBP for 96 h showed that the protein, fat, and carbohydrate digestion and absorption pathways, pancreatic secretion, PPAR signaling pathway, tryptophan metabolism, and adipocytokine signaling pathway were considerably down-regulated, but the cholesterol metabolism pathway was up-regulated in larval zebrafish. The altered transcriptional expression of mRNA at early development stage (96 h post fertilization) of zebrafish suggested that the 2,4-DTBP caused reduction of digestive capacity and pancreatic secretory function, and adversely affected processes associated with energy metabolism and glycolipid metabolism of larval zebrafish. This study helps us further understanding the effects of plastic leachate on the early development of fishes.

Freshwater Lacustrine Zooplankton and Microplastic: An Issue to Be Still Explored

Lakes are essentially interlinked to humans as they provide water for drinking, agriculture, industrial and domestic purposes. The upsurge of plastic usage, its persistence, and potential detrimental effects on organisms cause impacts on the trophic food web of freshwater ecosystems; this issue, however, still needs to be explored. Zooplankton worldwide is commonly studied as an indicator of environmental risk in aquatic ecosystems for several pollutants. The aim of the review is to link the existing knowledge of microplastic pollution in zooplankton to assess the potential risks linked to these organisms which are at the first level of the lacustrine trophic web. A database search was conducted through the main databases to gather the relevant literature over the course of time. The sensitivity of zooplankton organisms is evident from laboratory studies, whereas several knowledge gaps exist in the understanding of mechanisms causing toxicity. This review also highlights insufficient data on field studies hampering the understanding of the pollution extent in lakes, as well as unclear trends on ecosystem-level cascading effects of microplastics (MPs) and mechanisms of toxicity (especially in combination with other pollutants). Therefore, this review provides insight into understanding the overlooked issues of microplastic in lake ecosystems to gain an accurate ecological risk assessment.

Quantification and Chemical Characterization of Plastic Additives and Small Microplastics (<100 μm) in Highway Road Dust

Road dust is one of the environment's most important microplastic and plastic additive sources. Traffic vehicles and the wear of tires can release these emerging contaminants, which can be resuspended in the air and washed off by stormwater runoff. In this study, a concurrent quantification and chemical characterization of additives, plasticizers, natural and non-plastic synthetic fibers (APFs), and small microplastics (SMPs, <100 µm) in samples of highway road dust (HWRD) was performed. The sampling procedure was optimized, as well as pretreatment (extraction, purification, and filtration) and analysis via micro-FTIR. The average length of the SMPs was 88 µm, while the average width was 50 µm. The highest abundance of SMPs was detected in HWRD 7 (802 ± 39 SMPs/g). Among the polymers characterized and quantified, vinyl ester and polytetrafluoroethylene were predominant. APFs' average particle length was 80 µm and their width was 45 µm, confirming that both of these emerging pollutants are less than 100 µm in size. Their maximum concentration was in RD7, with 1044 ± 45 APFs/g. Lubricants and plasticizers are the two most abundant categories, followed by vulcanizing agents, accelerators, and pre-vulcanizing retarders derived mainly from tires. A potential relationship between APFs and SMPs in the different seasons was observed, as their concentration was lower in summer for both and higher in winter 2022. These results will be significant in investigating the load of these pollutants from highways, which is urgently necessary for more accurate inclusion in emission inventories, receptor modeling, and health protection programs by policymakers, especially in air and water pollution policies, to prevent risks to human health.

Toxicity of tire particle leachates on early life stages of keystone sea urchin species

Particles from tires are a major fraction of microplastic pollution. They contain a wide range of chemical additives that can leach into the water and be harmful to aquatic organisms. In this study, we investigated the acute toxicity of tire particle leachates in early life stages of three keystone echinoderm species (Paracentrotus lividus, Arbacia lixula, Diadema africanum). Embryos were exposed for 72 h to a range of leachate dilutions, prepared using a concentration of 1 g L-1. Larval growth, abnormal development, and mortality were the measured endpoints. Furthermore, we estimated the activity of glutathione S transferase (GST) and the electron transport system (ETS) in P. lividus. Strong concentration-dependent responses were observed in all species, though with differing sensitivity. The median effect concentrations for abnormal development in P. lividus and A. lixula were 0.16 and 0.35 g L-1, respectively. In D. africanum, mortality overshadowed abnormal development and the median lethal concentration was 0.46 g L-1. Larvae of P. lividus were significantly smaller than the control from 0.125 g L-1, while the other two species were affected from 0.5 g L-1. ETS activity did not change but there was a non-significant trend of increasing GST activity with leachate concentration in P. lividus. Seven organic chemicals and eight metals were detected at elevated concentrations in the leachates. While we regard zinc as a strong candidate to explain some of the observed toxicity, it can be expected that tire particle leachates exhibit a cocktail effect and other leached additives may also contribute to their toxicity. Our results emphasize the importance of multi-species studies as they differ in their susceptibility to tire particle pollution. We found negative effects at concentrations close to projections in the environment, which calls for more research and mitigation actions on these pollutants.

Microplastics increase the toxicity of mercury, chlorpyrifos and fluoranthene to mussel and sea urchin embryos

The objective of this study was to determine whether and to what extent microplastics (MPs) enhance the toxicity of pollutants as well as whether pollutant-loaded MPs act as relevant vectors of chemical pollutants. With this aim, the toxicity for mussel and sea urchin embryos of: 1) three dissolved pollutants (Pol): chlorpyrifos (CPF), fluoranthene (FLT) and mercury (Hg); 2) their mixture with Microplastics (MP + Pol); and 3) pollutant-loaded MPs (MPPol), was assessed. Analyses of CPF, FLT and Hg were also performed to evaluate the transfer among dissolved and particulate phases. In general, the 'MP + Pol' treatments were more toxic as 48-h EC50 (μg/L) than the 'Pol' treatments for sea urchin or mussel. The 48-h and 120-h EC50s (μg/L) for sea urchin showed little variation for CPF and MP + CPF, and no clear pattern was found for FLT and MP + FLT. The performed chemical analysis in the MPPol tests indicated that desorption was the main route to explain the observed toxicity of Hg and a relevant route for CPF and FLT. This study contributes to improve the knowledge about the interactions between MPs and chemical pollutants, which is fundamental for a more realistic ecological risk assessment in aquatic ecosystems.

Sublethal effects of bio-plastic microparticles and their components on the behaviour of Daphnia magna

Bioplastics arise as an alternative to plastic production delinked from fossil resources. However, as their demand is increasing, there is a need to investigate their environmental fingerprint. Here we study the toxicity of microplastics (MPLs) of two widely used materials, the polylactic acid (PLA) and the polyhydroxybutyrate (PHB) on the environmental aquatic model species Daphnia magna. The study was focused on sublethal behavioural and feeding endpoints linked to antipredator scape responses and food intake. The study aimed to test that MPLs from single-use household comercial items and among them bioplastics should be more toxic than those obtained from standard plastic polymers and fossil plastic materials due to the greater amount of plastic additives, and that MPLs should be more toxic than plastic extracts due to the contribution of both particle and plastic additive toxicity. MPLs were obtained by cryogenic grinding and sea-sand erosion to obtain irregular particles. MPL included standard polymers and nine comercial items of PLA and PHB and one fossil-based material of high-density polyethylene (HDPE). The additive content in commercial items was characterised by liquid chromatography coupled with high-resolution mass spectrometry. D. magna juveniles were exposed for 24 h to particles and their plastic extracts. Results indicated that the toxicity of bioplastic particles was five times higher than the effects produced by exposure to the content of the additives alone, that bioplastic particles were more toxic than fossil ones and that particles obtained from commercial items were more toxic than those obtained from PLA, PHB or HDPE polymer standards. Predicted toxicity from the measured plastic additives in the studied commercially available household items, however, was poorly related with the observed behavioural and feeding effects. Further research on unknown chemical components together with physical factors is need it to fully understand the mechanisms of toxicity of bioplastic materials.

Bibliometric and Co-Occurrence Study of Process System Engineering (PSE) Applied to the Polyvinyl Chloride (PVC) Production

PVC is widely used in packaging, electrical insulation, and medical devices due to its versatility owing to its resistance, incombustible and barrier properties as well as affordable cost. In the present study, bibliometric and co-occurrence analyses are proposed to identify trends, gaps, future directions, and challenges regarding process system engineering (PSE) applied to the production process of PVC using VOSviewer as a tool for analyzing the data obtained from SCOPUS. A mapping of different topics alluding to simulation of PVC production was provided to gain a better insight into the development of the topic and its progression. The findings indicate that the literature on this topic falls into five different clusters: modeling and simulation of PVC production, process control and optimization, and optimization strategies of the process. From a co-occurrence study we identified that mathematics and statistics applied to polymer chemistry, separation phenomena, and polymer production are the main areas of interest for further research. The trends suggest that Monte Carlo and numerical simulation can contribute to a deeper understanding of PVC's properties and behavior. In addition, the focus on plastics and microplastics reflects concerns about the environmental impact. A bibliometric study evidenced that PSE provides the tools for improvement in PVC production processes by employing advanced process engineering techniques. Modelling and new algorithms for simulation methods of continuous polymerization processes are important to enhance accuracy and efficiency across various applications. The study also proposes a research agenda for future researchers working in the field of the use of PSE applied to the PVC production process.

UV Dosage Unveils Toxic Properties of Weathered Commercial Bioplastic Bags

Previous studies indicated that weathered conventional plastics and bioplastics pose ecotoxicological risks. Here, the effects of artificial and natural weathering on the ecotoxicity of three compostable bags and a conventional polyethylene (PE) bag are investigated. With that aim, a 21-day artificial indoor weathering experiment featuring UV light, UV-filtered light, and darkness was run simultaneously to a 120-day outdoor littoral mesocosm exposure featuring natural light, UV-filtered light, and shaded conditions. Acute toxicity of so-weathered plastic specimens was tested in vivo using the sensitive Paracentrotus lividus sea-urchin embryo test. PE was nontoxic from the beginning and did not gain toxicity due to UV weathering. In contrast, for bioplastics, dry artificial UV weathering increased toxicity in comparison to the dark control. Weathering in outdoor mesocosm led to a rapid loss of toxic properties due to leaching in rainwater. With a higher UV dosage, a plastic-type-dependent regain of toxicity was observed, most likely driven by enhanced availability or transformation of functional additives or due to bioplastic degradation products. PE showed moderate UV absorbance, while bioplastics showed high UV absorbance. This study highlights the potential of biodegradable plastics to pose enhanced ecotoxicological risk due to weathering under environmentally relevant conditions.

Hazardous state lifetimes of biodegradable plastics in natural environments

Plastic pollution is a critical problem that has the potential for long-lasting impact. While all plastics eventually break down to at least some degree, they can remain in different transition states, such as microplastics and nanoplastics, for extended periods of time before reaching complete mineralisation to non-hazardous end products. Each of the transition states represents different types of hazards, so it is critical to understand the factors driving the lifetimes of plastics within these states. To do this, we propose a framework for assessing plastic lifetimes in natural environments based on the flow of material through potentially hazardous states: macroplastic and mesoplastic, microplastic, nanoplastic and soluble products. State changes within this framework are underpinned by three key processes: fragmentation, depolymerisation, and bioassimilation, with the pathways for generation of the different plastic states, and the lifetimes within these states, varying widely for individual materials in different environments due to their dependence on polymer material type, form and properties, and environmental factors. The critical factors driving these processes can therefore appear complex, but molecular weight, crystallinity, oxygen and water diffusivity, and inherent polymer chain reactivity (including to enzymes) are key to our understanding. By analysing currently available data that take factors such as these into consideration, we have generated information on the most likely states in which a range of plastics with different environmental degradation behaviour may exist over time in natural environments. Polyethylene (PE), for example, should be expected to fragment and accumulate in the environment as microplastic and nanoplastic. Interestingly, the state-profile for the biodegradable plastic polylactic acid (PLA) is similar, albeit over shorter timeframes. PLA also likely fragments, but then the relatively slow process of abiotic depolymerisation results in accumulation of microplastic and nanoplastic. By contrast, the state-profile for the biodegradable plastic polyhydroxyalkanoate (PHA) would be expected to be very different. The bulk material is less susceptible to embrittlement and fragmentation as a primary path to biodegradation, since the rapid enzyme catalysed depolymerisation of exposed surfaces proceeds in conjunction with bioassimilation.

Microplastics in the Gulf of Guinea: An analysis of concentrations and distribution in sediments, gills, and guts of fish collected off the coast of Ghana

Microplastics (MPs, <5 mm) accumulate in marine environments, impacting marine organism health. This study examined MPs in sediment and two pelagic fish species (S. maderensis and I. africana) in Ghana's Gulf of Guinea. The study found an average concentration of 0.144 ± 0.061 items/g (dry weight) in the sediment, with pellets and transparent particles being the most common types. The concentration of MPs in contaminated fish ranged from 8.35 to 20.95, with fibers and pellets being the most abundant plastic-type in fish. Individual organ concentrations of MPs varied. In fish gills, concentrations ranged from 1 to 26 MPs/individual for I. africana and 1-22 MPs/individual for S. maderensis. Concentrations in the fish guts ranged from 1 to 29 MPs/individual for I. africana and 2-24 MPs/individual for S. maderensis. Results from the study highlight the importance of both gills and guts as important organs in terms of microplastic contamination and emphasize the significance of monitoring microplastic contamination in fish gills and guts. This offers valuable insight into the impact of MPs on the marine environment and human health.

Microplastics could be marginally more hazardous than natural suspended solids - A meta-analysis

Microplastics (MP) are perceived as a threat to aquatic ecosystems but bear many similarities to suspended sediments which are often considered less harmful. It is, therefore pertinent to determine if and to what extent MP are different from other particles occurring in aquatic ecosystems in terms of their adverse effects. We applied meta-regressions to toxicity data extracted from the literature and harmonized the data to construct Species Sensitivity Distributions (SSDs) for both types of particles. The results were largely inconclusive due to high uncertainty but the central tendencies of our estimates still indicate that MP could be marginally more hazardous compared to suspended sediments. In part, the high uncertainty stems from the general lack of comparable experimental studies and dose-dependent point estimates. We therefore argue that until more comparable data is presented, risk assessors should act precautionary and treat MP in the 1-1000 µm size range as marginally more hazardous to aquatic organisms capable of ingesting such particles.

The biocide triclosan as a potential developmental disruptor in Mytilus early larvae

The broadly utilized biocide triclosan (TCS) is continuously discharged in water compartments worldwide, where it is detected at concentrations of ng-µg/L. Given its lipophilicity and bioaccumulation, TCS is considered potentially harmful to human and environmental health and also as a potential endocrine disruptor (ED) in different species. In aquatic organisms, TCS can induce a variety of effects: however, little information is available on its possible impact on invertebrate development. Early larval stages of the marine bivalve Mytilus galloprovincialis have been shown to be sensitive to environmental concentrations of a number of emerging contaminants, including EDs. In this work, the effects of TCS were first evaluated in the 48 h larval assay in a wide concentration range (0.001-1,000 μg/L). TCS significantly affected normal development of D-veligers (LOEC = 0.1 μg/L; EC50 = 236.1 μg/L). At selected concentrations, the mechanism of action of TCS was investigated. TCS modulated transcription of different genes involved in shell mineralization, endocrine signaling, ceramide metabolism, and biotransformation, depending on larval stage (24 and 48 h post-fertilization-hpf) and concentration (1 and 10 μg/L). At 48 hpf and 10 μg/L TCS, calcein staining revealed alterations in CaCO3 deposition, and polarized light microscopy showed the absence of shell birefringence due to the mineralized phase. Observations by scanning electron microscopy highlighted a variety of defects in shell formation from concentrations as low as 0.1 μg/L. The results indicate that TCS, at environmental exposure levels, can act as a developmental disruptor in early mussel larvae mainly by interfering with the processes of biomineralization.

The toxicity of microplastics and their leachates to embryonic development of the sea cucumber Apostichopus japonicus

Microplastic pollution has been widely detected across the global ocean, posing a major threat to a wide variety of marine biota. To date, the deleterious impacts of microplastics have predominantly been linked to their direct exposure, while the potential risks posed by the leachates emanating from microplastics have received comparatively less attention. Here, the toxicity of virgin plasticized polyvinyl chloride (PVC) microspheres and their leachates were evaluated on the embryo-larval development of sea cucumber Apostichopus japonicus using an in-vitro assay. Results showed that a significant toxic effect of both PVC microspheres and their leachates on the embryo development and larval growth of sea cucumbers follows a dose-dependent and time-dependent pattern. Nonetheless, the toxicity of PVC leachates surpasses that of the microspheres themselves. Abnormal developmental phenotypes, such as aberrant gastrulation, misaligned mesenchymal cells, and delayed arm development, were also observed in embryos and larvae treated with PVC. Further chemical analyses of PVC microspheres and leachates revealed the existence of five distinct phthalate esters (PAEs), with DIBP (diisobutyl phthalate) and DBP (dibutyl phthalate) exhibiting higher concentrations in the PVC leachates. This finding suggests that the elevated toxicity of plastic leachate may be attributed to the leaching of phthalate additives from the plastic particles.

Internal Defense System of Mytilus galloprovincialis (Lamarck, 1819): Ecological Role of Hemocytes as Biomarkers for Thiacloprid and Benzo[a]Pyrene Pollution

The introduction of pollutants, such as thiacloprid and benzo[a]pyrene (B[a]P), into the waters of urbanized coastal and estuarine areas through fossil fuel spills, domestic and industrial waste discharges, atmospheric inputs, and continental runoff poses a major threat to the fauna and flora of the aquatic environment and can have a significant impact on the internal defense system of invertebrates such as mussels. Using monoclonal and polyclonal anti-Toll-like receptor 2 (TLR2) and anti-inducible nitric oxide synthetase (iNOS) antibodies for the first time, this work aims to examine hemocytes in the mantle and gills of M. galloprovincialis as biomarkers of thiacloprid and B[a]P pollution and analyze their potential synergistic effect. To pursue this objective, samples were exposed to the pollutants, both individually and simultaneously. Subsequently, oxidative stress biomarkers were evaluated by enzymatic analysis, while tissue changes and the number of hemocytes in the different contaminated groups were assessed via histomorphological and immunohistochemical analyses. Our findings revealed that in comparison to a single exposure, the two pollutants together significantly elevated oxidative stress. Moreover, our data may potentially enhance knowledge on how TLR2 and iNOS work as part of the internal defense system of bivalves. This would help in creating new technologies and strategies, such as biosensors, that are more suitable for managing water pollution, and garnering new details on the condition of the marine ecosystem.

Eco-toxicity assessment of industrial by-product-based alkali-activated binders using the sea urchin embryogenesis bioassay

New cement-based materials such as alkali-activated binders (AABs) or geopolymers allow the incorporation of waste or industrial by-products in their formulation, resulting an interesting valorization technique. Therefore, it is essential to inquire about the potential environmental and health impacts throughout their life cycle. In the European context, a minimum aquatic toxicity tests battery has been recommended for construction products, but their potential biological effects on marine ecosystems have not been considered. In this study, three industrial by-products, PAVAL® (PV) aluminum oxide, weathered bottom ash (WBA) resulting from incinerator bottom ash and glass cullet recycling waste (CSP), were evaluated as precursors in the AAB formulation from an environmental point of view. To determine the potential effects on marine environment caused by the leaching of contaminants from these materials into seawater, the leaching test EN-12457-2 and an ecotoxicity test using the model organism sea urchin Paracentrotus lividus were conducted. The percentage of abnormal larval development was selected as endpoint of the toxicity test. Based on the results obtained from the toxicity tests, AABs have less damaging impact (EC₅₀ values: 49.2%-51.9%) on the marine environment in general than raw materials. The results highlight the need to stablish a specific battery of toxicity tests for the environmental assessment of construction products on marine ecosystem.

A protocol for lixiviation of micronized plastics for aquatic toxicity testing

Plastics contain various types and amounts of additives that can leach into the water column when entering aquatic ecosystems. Some leached plastic additives are hazardous to marine biota at environmentally relevant concentrations. Disparate methodological approaches have been adopted for toxicity testing of plastic leachates, making comparison difficult. Here we propose a protocol to standardize the methodology to obtain leachates from microplastics (MPs) for aquatic toxicity testing. Literature reviewing and toxicity tests using marine model organisms and different types of MPs were conducted to define the main methodological aspects of the protocol. Acute exposure to leachates from the studied plastics caused negative effects on the early life stages of sea urchins and marine bacteria. We provide recommendations of key factors influencing MPs lixiviation, such as MP size (<250 μm), solid-to-liquid ratio (1-10 g/L), mixing conditions (1-60 rpm), and lixiviation time (72 h). The proposed methodology was successful to determine the toxicity of leachates from different micronized plastics on marine biota. Our recommendations balance feasibility and environmental relevance, and their use would help ensure comparability amongst studies for a better assessment of the toxicity of plastic leachates on aquatic biota.

UV-induced microplastics (MPs) aging leads to comprehensive toxicity

Herein, the toxicity of 4 MPs and additives released from MPs during UV-aging was quantitatively evaluated by the transcriptional effect level index (TELI) based on E. coli whole-cell microarray assay, and MPs-antibiotics complex pollutants. Results showed that MPs and these additives had high toxicity potential, the maximum TELI was 5.68/6.85 for polystyrene (PS)/bis(2-ethylhexyl) phthalate (DEHP). There were many similar toxic pathways between MPs and additives, indicating that part of the toxicity risk of MPs was caused by the release of additives. MPs were compounded with antibiotics, the toxicity value changed significantly. The TELI values of amoxicillin (AMX) + polyvinyl chloride (PVC) and ciprofloxacin (CIP) + PVC were as high as 12.30 and 14.58 (P < 0.05). Three antibiotics all decreased the toxicity of PS and had little effect on polypropylene (PP) and polyethylene (PE). The combined toxicity mechanism of MPs and antibiotics was very complicated, and the results could be divided into four types: MPs (PVC/PE + CIP), antibiotics (PVC + TC, PS + AMX/ tetracycline (TC)/CIP, PE + TC), both (PP + AMX/TC/CIP), or brand-new mechanisms (PVC + AMX).

Filtration of biopolymer PHB particles loaded with synthetic musks does not cause significant bioaccumulation in marine mussels

The role of the biopolymer polyhydroxybutyrate (PHB, <250 µm) as a vehicle of a synthetic musks mixture (celestolide, galaxolide, tonalide, musk xylene, musk moskene and musk ketone) to Mytilus galloprovincialis was investigated. For 30 days, virgin PHB, virgin PHB+musks (6.82 µg g-1) and weathered PHB+musks, were daily spiked into tanks containing mussels, followed by a 10-day depuration period. Water and tissues samples were collected to measure exposure concentrations and accumulation in tissues. Mussels were able to actively filter microplastics in suspension but the concentration of the musks found in tissues (celestolide, galaxolide, tonalide) were markedly lower than the spiked concentration. Estimated Trophic Transfer Factors suggest that PHB will only play a minor role on musks accumulation in marine mussels, even if our results suggest a slightly extended persistence in tissues of musks loaded to weathered PHB.

Are microplastics contributing to pollution-induced neurotoxicity? A pilot study with wild fish in a real scenario

Pollution-induced neurotoxicity is of high concern. This pilot study investigated the potential relationship between the presence of microplastics (MPs) in the brain of 180 wild fish (Dicentrarchus labrax, Platichthys flesus, Mugil cephalus) from a contaminated estuary and the activity of the acetylcholinesterase (AChE) enzyme. MPs were found in 9 samples (5% of the total), all of them from D. labrax collected in the summer, which represents 45% of the samples of this species collected in that season (20). Seventeen MPs were recovered from brain samples, with sizes ranging from 8 to 96 μm. Polyacrylamide, polyacrylic acid and one biopolymer (zein) were identified by Micro-Raman spectroscopy. Fish with MPs showed lower (p ≤ 0.05) AChE activity than those where MPs were not found. These findings point to the contribution of MPs to the neurotoxicity induced by long-term exposure to pollution, stressing the need of further studies on the topic to increase 'One Health' protection.

Additives in polypropylene and polylactic acid food packaging: Chemical analysis and bioassays provide complementary tools for risk assessment

Plastic food packaging represents 40 % of the plastic production worldwide and belongs to the 10 most commonly found items in aquatic environments. They are characterized by high additives contents with >4000 formulations available on the market. Thus they can release their constitutive chemicals (i.e. additives) into the surrounding environment, contributing to chemical pollution in aquatic systems and to contamination of marine organism up to the point of questioning the health of the consumer. In this context, the chemical and toxicological profiles of two types of polypropylene (PP) and polylactic acid (PLA) food packaging were investigated, using in vitro bioassays and target gas chromatography mass spectrometry analyses. Plastic additives quantification was performed both on the raw materials, and on the material leachates after 5 days of lixiviation in filtered natural seawater. The results showed that all samples (raw materials and leachates) contained additive compounds (e.g. phthalates plasticizers, phosphorous flame retardants, antioxidants and UV-stabilizers). Differences in the number and concentration of additives between polymers and suppliers were also pointed out, indicating that the chemical signature cannot be generalized to a polymer and is rather product dependent. Nevertheless, no significant toxic effects was observed upon exposure to the leachates in two short-term bioassays targeting baseline toxicity (Microtox® test) and Pacific oyster Crassostrea gigas fertilization success and embryo-larval development. Overall, this study demonstrates that both petrochemical and bio-based food containers contain harmful additives and that it is not possible to predict material toxicity solely based on chemical analysis. Additionally, it highlights the complexity to assess and comprehend the additive content of plastic packaging due to the variability of their composition, suggesting that more transparency in polymer formulations is required to properly address the risk associated with such materials during their use and end of life.

Assessment of the environmental acceptability of potential artificial reef materials using two ecotoxicity tests: Luminescent bacteria and sea urchin embryogenesis

Ecotoxicological analysis of construction products is a relatively unexplored area at international level. Aquatic toxicity tests on construction products has been recommended recently for freshwater environment. However, the biological effects of alternative materials on marine ecosystem are still not considered. In this study, the main aim was to assess the environmental impact of alternative mortars proposed as artificial reefs (ARs) materials. The ARs specimens were developed by 3D printing, based on cement and geopolymer mortars using recycled sands of glass and seashells. For this purpose, a leaching test and two different toxicity bioassays, luminosity reduction of marine bacteria Vibrio fischeri (Microtox®) and the success of embryo-larval development of sea-urchin Paracentrotus lividus, were conducted. From the leaching results it should be noted that the mobility of all trace elements considered in both, raw materials and mortars, meet the inert landfill limits, except As, Mo, Se or Sb in the leachates geopolymer mortars. However, the results obtained from the both bioassays show low environmental acceptability for those mortars containing shell sand, probably due to the degradation of the organic matter adhered to the shells. On the other hand, cement mortars obtain better results than geopolymer mortars, regardless of the aggregate used, showing certain consistency with the leaching behaviour, since they present the lowest mobility of trace chemical elements. Therefore, the results supporting the environmental acceptability of its potential use as alternative materials in the production of ARs.

Detection of microplastics and phthalic acid esters in sea urchins from Sardinia (Western Mediterranean Sea)

The occurrence of microplastics (MPs) and phthalic acid esters (PAEs) in wild purple sea urchins (Paracentrotus lividus) of Sardinia (Italy, Western Mediterranean Sea) was surveyed. Specifically, MPs were analyzed in the digestive tract by μFTIR and PAEs in the gonads by SPME-LC-MS/MS. 9 out of 22 specimens resulted contaminated with MPs and 20 displayed levels of PAEs over the quantification limit. A total of 23 MPs were detected with a maximum concentration of 4 microplastics/individual in the commercially undersized specimens. PAEs displayed average concentration of 32 ng/g, σ = 5.3 with maximum value of 77 ng/g. The most abundant congeners were DEHP (17 ng/g, σ = 4.3) and DBP (10 ng/g, σ = 2.5). Statistical analysis showed correlation between DEHP and fiber concentrations and among the concentration of MEP, DEP, DBP and BBzP. Due to local use of sea urchin gonads as gourmet delicacy, the potential human exposition to MPs and PAEs by consumption is also discussed.

Sustainable PHBH-Alumina Nanowire Nanocomposites: Properties and Life Cycle Assessment

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) is a bio-based polyester with the potential to replace some common polymers of fossil origin. However, PHBH presents serious limitations, such as low stiffness, tendency to undergo crystallization over long time periods and low resistance to thermal degradation during processing. In this work, we studied the use of alumina nanowires to generate PHBH-alumina nanocomposites, modifying the properties of PHBH to improve its usability. Solvent casting and melt blending were used to produce the nanocomposites. Then, their physicochemical properties and aquatic toxicity were measured. Finally, LCA was used to evaluate and compare the environmental impacts of several scenarios relevant to the processing and end of life (EoL) conditions of PHBHs. It was observed that, at low concentrations (3 wt.%), the alumina nanowires have a small positive impact on the stiffness and thermal degradation for the samples. However, for higher concentrations, the observed effects differed for each of the applied processing techniques (solvent casting or melt blending). The toxicity measurements showed that PHBH alone and in combination with alumina nanowires (10 wt.%) did not produce any impact on the survival of brine shrimp larvae after 24 and 48 h of exposure. The 18 impact categories evaluated by LCA allowed defining the most environmentally friendly conditions for the processing and EoL of PHBHs, and comparing the PHBH-related impacts to those of some of the most common fossil-based plastics. It was concluded that the preferable processing technique for PHBH is melt blending and that PHBH is unquestionably more environmentally friendly than every other analyzed plastic.

Dose-Dependent Cytotoxicity of Polypropylene Microplastics (PP-MPs) in Two Freshwater Fishes

The massive accumulation of plastics over the decades in the aquatic environment has led to the dispersion of plastic components in aquatic ecosystems, invading the food webs. Plastics fragmented into microplastics can be bioaccumulated by fishes via different exposure routes, causing several adverse effects. In the present study, the dose-dependent cytotoxicity of 8−10 μm polypropylene microplastics (PP-MPs), at concentrations of 1 mg/g (low dose) and 10 mg/g dry food (high dose), was evaluated in the liver and gill tissues of two fish species, the zebrafish (Danio rerio) and the freshwater perch (Perca fluviatilis). According to our results, the inclusion of PP-MPs in the feed of D. rerio and P. fluviatilis hampered the cellular function of the gills and hepatic cells by lipid peroxidation, DNA damage, protein ubiquitination, apoptosis, autophagy, and changes in metabolite concentration, providing evidence that the toxicity of PP-MPs is dose dependent. With regard to the individual assays tested in the present study, the biggest impact was observed in DNA damage, which exhibited a maximum increase of 18.34-fold in the liver of D. rerio. The sensitivity of the two fish species studied differed, while no clear tissue specificity in both fish species was observed. The metabolome of both tissues was altered in both treatments, while tryptophan and nicotinic acid exhibited the greatest decrease among all metabolites in all treatments in comparison to the control. The battery of biomarkers used in the present study as well as metabolomic changes could be suggested as early-warning signals for the assessment of the aquatic environment quality against MPs. In addition, our results contribute to the elucidation of the mechanism induced by nanomaterials on tissues of aquatic organisms, since comprehending the magnitude of their impact on aquatic ecosystems is of great importance.

Distribution and retention of microplastics in plantation mangrove forest sediments

Microplastics (MPs) in ocean tides can be effectively intercepted by mangroves, especially sediments, which are considered to be effective sinks. However, the retention of plantation mangrove forests on MPs is still unclear. In this study, the spatial distribution and its implication factors of MPs in surface sediments of plantation mangrove forests were investigated for the first time. In plantation forests, MPs were detected with abundances ranging from 67 ± 21 to 203 ± 25 items/kg, and plantation forests were significantly lower than natural forests at the CJ sampling site (p < 0.05). Plantation forests had fewer fibrous MPs than natural forests (p < 0.05). Furthermore, the MPs abundance showed strong linear relationships with the sand content (p = 0.002, R² = 0.86) and Aegiceras corniculata biomass (p = 0.001, R² = 0.84). Partial least squares path modeling analysis (PLS-PM) indicated that these two factors influenced MPs abundance by retaining MPs with fibrous, fragmented, denser and larger-sized characteristics. Our results revealed the differences in MPs abundance and characteristics between plantation and natural mangrove forests, and it is necessary to monitor MPs pollution to provide significant guidance for the restoration of constructed wetlands.

Interactive effect of urbanization and flood in modulating microplastic pollution in rivers

Freshwater ecosystems play an important role in transporting and accumulating microplastics. Spatial and temporal variability in microplastic pollution can create critical spots and moments of elevated pollution, however, the consequences of their interaction are still poorly understood. This study aimed to assess the interaction between urbanization and flood episodes on river microplastic pollution. The water surface was sampled in two sites of the Garonne River, upstream and downstream a large urban area, during two flood episodes. Samples were chemically digested to facilitate particles isolation, and microplastics (700 μm-5 mm) were characterized through infrared spectroscopy (ATR-FTIR). Microplastic concentration increased by 5-8 fold during flood episodes, driven by river discharge. This increase was more significant in the downstream site. During the flood, there was an overall increase of larger particles on water surface, but only in the downstream site microplastic colours and polymeric compositions significantly varied. Principal component analysis of infrared spectra from polyethylene microplastics revealed that the main variance in the spectral region corresponded to hydroxyl and carbonyl groups. The carbonyl content in microplastics was significantly higher for particles collected during the flood, likely indicating a higher level of degradation. Urbanization modulates freshwater microplastic pollution during floods, and changes in microplastic physicochemical profile should be further integrated within toxicity studies to evaluate risks potentially elevated to animal and human health.

Modifications of microplastics in urban environmental management systems: A review

Microplastics (MPs) are a worldwide environmental pollution issue. Besides the natural environmental stresses, various treatments in urban environmental management systems induce modifications on MPs, further affecting their environmental behavior. Investigating these modifications and inherent mechanisms is crucial for assessing the environmental impact and risk of MPs. In this review, up-to-date knowledge regarding the modifications of MPs in urban environmental management systems was summarized. Variations of morphology, chemical composition, hydrophilicity and specific surface area of MPs were generalized. The aging and degradation of MPs during drinking water treatment, wastewater treatment, sewage sludge treatment and solid waste treatment were investigated. A high abundance of MPs occurred in sewage sludge and aging solid waste, while digestion and composting contributed to significant decomposition and reduction of MPs. These treatments have become converters for MPs before entering the environment. Several novel technologies for MPs removal were listed; However, no appropriate methods can be put into actual application by now, except the membrane separation. The corresponding effects of degradation on the behaviors of MPs, including adsorption, sinking and contaminant leakage, were discussed. Finally, three priorities for research were proposed. This critical review provides viewpoints and references for risk evaluation of MPs after treatments in urban environmental management systems.

Occurrence and Characterization of Small Microplastics (<100 μm), Additives, and Plasticizers in Larvae of Simuliidae

This study is the first to investigate the ingestion of microplastics (MPs), plasticizers, additives, and particles of micro-litter < 100 μm by larvae of Simuliidae (Diptera) in rivers. Blackflies belong to a small cosmopolitan insect family whose larvae are present alongside river courses, often with a torrential regime, up to their mouths. Specimens of two species of blackfly larvae, Simulium equinum and Simulium ornatum, were collected in two rivers in Central Italy, the Mignone and the Treja. Small microplastics (SMPs, <100 μm), plasticizers, additives, and other micro-litter components, e.g., natural and non-plastic synthetic fibers (APFs) ingested by blackfly larvae were, for the first time, quantified and concurrently identified via MicroFTIR. The pretreatment allowed for simultaneous extraction of the ingested SMPs and APFs. Strong acids or strong oxidizing reagents and the application of temperatures well above the glass transition temperature of polyamide 6 and 6.6 (55−60 °C) were not employed to avoid further denaturation/degradation of polymers and underestimating the quantification. Reagent and procedural blanks did not show any SMPs or APFs. The method’s yield was >90%. Differences in the abundances of the SMPs and APFs ingested by the two species under exam were statistically significant. Additives and plasticizers can be specific to a particular polymer; thus, these compounds can be proxies for the presence of plastic polymers in the environment.

The polymers and their additives in particulate plastics: What makes them hazardous to the fauna?

Due to the increasing concerns on global ecosystems and human health, the environmental risks posed by microplastics (MPs) and nanoplastics (NPs) have become an important topic of research. Their ecological impacts on various faunal species have been extensively researched and reviewed. However, the majority of those studies perceive these micro(nano)-plastics (MNPs) as a single entity rather than a collective term for a group of chemically distinct polymeric particulates. Each of the plastic polymers can possess unique physical and chemical behavior, which, in turn, can determine the possible environmental impacts. Furthermore, many studies explore the adsorption, absorption, and release of other environmental pollutants by MNPs. But only a handful of them explore the leaching of additives possessed by these polymers. Data on the environmental behavior and toxicity of individual additives associated with different polymer particulates are scarce. Knowledge about the leachability and ecotoxicity of the additives associated with environmental MNPs (unlike large plastic particles) remains limited. The ecological impacts of different MNPs together with their additives and the basis of their toxicity have not been explored yet. The present review systematically explores the potential implications of environmentally predominant polymers and their associated additives and discusses their physicochemical characteristics. The review ultimately aims to provide novel insights on what components precisely make MNPs hazardous to the fauna. The paper also discusses the major challenges proposed in the available literature along with recommendations for future research to throw light on possible solutions to overcome the hazards of MNPs.

Mesocosm trials reveal the potential toxic risk of degrading bioplastics to marine life

If biodegradable plastics tackle the marine plastic pollution problem sufficiently remains questionable. To gain more insight in degradability, performance, and the impact of degradation on the toxicity, commercial bags made from two biodegradable plastics and one conventional plastic (PE) were exposed for 120 days in a mesocosm featuring benthic, pelagic, and littoral habitat simulations. Degradability was assessed as weight loss, and specimens were tested for toxicity using Paracentrotus lividus sea-urchin larvae after different exposure times. Both biodegradable bags showed degradation within 120 days, with the littoral simulation showing the highest and the pelagic simulation the lowest decay. Disregarding habitat, the home-compostable plastic showed higher marine degradation than the industrial-compostable material. The relevant initial toxicity of both biopolymers was lost within 7 days of exposure, pointing towards easily leachable chemical additives as its cause. Interestingly, littoral exposed specimens gained toxicity after 120 days, suggesting UV- induced modifications that increase biopolymer toxicity.

Triclosan: A Small Molecule with Controversial Roles

Triclosan (TCS), a broad-spectrum antimicrobial agent, has been widely used in personal care products, medical products, plastic cutting boards, and food storage containers. Colgate Total^® toothpaste, containing 10 mM TCS, is effective in controlling biofilm formation and maintaining gingival health. Given its broad usage, TCS is present ubiquitously in the environment. Given its strong lipophilicity and accumulation ability in organisms, it is potentially harmful to biohealth. Several reports suggest the toxicity of this compound, which is inserted in the class of endocrine disrupting chemicals (EDCs). In September 2016, TCS was banned by the U.S. Food and Drug Administration (FDA) and the European Union in soap products. Despite these problems, its application in personal care products within certain limits is still allowed. Today, it is still unclear whether TCS is truly toxic to mammals and the adverse effects of continuous, long-term, and low concentration exposure remain unknown. Indeed, some recent reports suggest the use of TCS as a repositioned drug for cancer treatment and cutaneous leishmaniasis. In this scenario it is necessary to investigate the advantages and disadvantages of TCS, to understand whether its use is advisable or not. This review intends to highlight the pros and cons that are associated with the use of TCS in humans.

Toxicological Effects of Microplastics and Sulfadiazine on the Microalgae Chlamydomonas reinhardtii

Despite the fact that microplastics (MPs) facilitate the adsorption of environmental organic pollutants and influence their toxicity for organisms, more study is needed on the combination of MPs and antibiotics pollutant effects. In this study, polystyrene MPs (1 and 5 μm) and sulfadiazine (SDZ) were examined separately and in combination on freshwater microalga, Chlamydomonas reinhardtii. The results suggest that both the MPs and SDZ alone and in combination inhibited the growth of microalgae with an increasing concentration of MPs and SDZ (5–200 mg l^–1); however, the inhibition rate was reduced by combination. Upon exposure for 7 days, both the MPs and SDZ inhibited algal growth, reduced chlorophyll content, and enhanced superoxide dismutase (SOD) activities, whereas glutathione peroxidase (GSH-Px) activity was elevated only with the exposure of 1 μm MPs. Fluorescence microscopy and scanning electron microscopy also indicated that particle size contributed to the combined toxicity by aggregating MPs with periphery pollutants. Further, the amount of extracellular secretory protein increased in the presence of MPs and SDZ removal ratio decreased when MPs and SDZ coexisted, suggesting that MPs affected SDZ metabolism by microalgae. The particle size of microplastics affected the toxicity of MPs on microalgae and the combined effect of MPs and SDZ could be mitigated by MPs adsorption. These findings provide insight into microalgae responses to the combination of MPs and antibiotics in water ecosystems.