Tunable active sites on biogas digestate derived biochar for sulfanilamide degradation by peroxymonosulfate activation

Roles of BOCu sites and graphite nitrogen on persulfate non-radical activation for tetracycline degradation

The activation of peroxymonosulfate (PMS) by carbon-based catalysts is deemed to be a promising method for the degradation of refractory organic contaminants in wastewater. Herein, a Cu-doping strategy in B and N co-doped carbon nanotubes with highly dispersed BOCu sites and graphite nitrogen were successfully synthesized for activating PMS to degradate tetracycline. The best removal rate of tetracycline within 60 min (97.63 %) was obtained by the 1.5 % Cu-BNC and the degradation rate was increased by 17.9 times. The enhanced catalyst activity was attributed to the promoting the cycle of the Cu(I)/Cu(II) redox pair by the formed BOCu sites, and the accelerating the electron transfer process by the adsorption of graphitic N for PMS. The non-free radical pathway including 1O2 and electron transfer played a dominant role in the 1.5 % Cu-BNC/PMS system. The degradation intermediates of TC were identified and three possible degradation pathways were proposed. Further toxicity analysis of the intermediates showed that the 1.5 % Cu-BNC/PMS system had a significant effect on weakening and reducing the biological toxicity and mutagenicity of TC. Moreover, it presented an excellent degradation performance in raw natural water. In general, the proposed regulation of carbon-based catalysts via the coordination-driven effect provides ideas for efficient wastewater treatment.

Activation of peroxymonosulfate with natural pyrite-biochar composite for sulfamethoxazole degradation in soil: Organic matter effects and free radical conversion

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) represent an effective method for the remediation of antibiotic-contaminated soils. In this study, a natural pyrite-biochar composite material (FBCx) was developed, demonstrating superior activation performance and achieving a 76% removal rate of SMX from soil within 120 min. There existed different degradation mechanisms for SMX in aqueous and soil solutions, respectively. The production of 1O2 and inherent active species produced by soil slurry played an important role in the degradation process. The combination of electron paramagnetic resonance (EPR) and free radical probe experiments confirmed the presence of free radical transformation processes in soil. Wherein, the·OH and SO4·- generated in soil slurry did not directly involve in the degradation process, but rather preferentially reacted with soil organic matter (SOM) to form alkyl-like radicals (R·), thereby maintaining a high concentration of reactive species in the system. Furthermore, germination and growth promotion of mung bean seeds observed in the toxicity test indicated the environmental compatibility of this remediation method. This study revealed the influence mechanism of SOM in the remediation process of contaminated soil comprehensively, which possessed enormous potential for application in practical environments.

Activating peroxymonosulfate with Fe-doped biochar for efficient removal of tetracycline: Dual action of reactive oxygen species and electron transfer

If pharmaceutical wastewater is not managed effectively, the presence of residual antibiotics will result in significant environmental contamination. In addition, inadequate utilization of agricultural waste represents a squandering of resources. The objective of this research was to assess the efficacy of iron-doped biochar (Fe-BC) derived from peanut shells in degrading high concentrations of Tetracycline (TC) wastewater through activated peroxymonosulfate. Fe-BC demonstrated significant efficacy, achieving a removal efficiency of 87.5% for TC within 60 min without the need to adjust the initial pH (20 mg/L TC, 2 mM PMS, 0.5 g/L catalyst). The degradation mechanism of TC in this system involved a dual action, namely Reactive Oxygen Species (ROS) and electron transfer. The primary active sites were the Fe species, which facilitated the generation of SO4•-, •OH, O2•-, and 1O2. The presence of Fe species and the C=C structure in the Fe-BC catalyst support the electron transfer. Degradation pathways were elucidated through the identification of intermediate products and calculation of the Fukui index. The Toxicity Estimator Software Tool (T.E.S.T.) suggested that the intermediates exhibited lower levels of toxicity. Furthermore, the system exhibited exceptional capabilities in real water and circulation experiments, offering significant economic advantages. This investigation provides an efficient strategy for resource recycling and the treatment of high-concentration antibiotic wastewater.

Developing Prussian blue/wood-derived biochar catalyst for persistent organic pollutant degradation: Preparation, characterization, and mechanism

Biomass-derived biochar shows broad promise for persistent organic pollutants (POPs) degradation and thus establishes a more sustainable homestead. However, effective catalytic performance is still challenging. Herein, an efficient catalyst (Prussian blue decorated wood-derived biochar, PBB) was constructed by introducing Prussian blue (PB) into wood-based biochar to activate peroxymonosulfate (PMS) for removing POPs. After anchoring of PB, the degradation performance of biochar was enhanced (degradation efficiency of methylene blue (MB, 20 mg/L) increased from 52% of biochar to 95% of PBB within 60 min). The PBB presents effective MB degradation performance with a wide pH value (3.0 < pH < 11.0) or co-existing diverse anions (Cl-, NO3-, H2PO4-, and HCO3-). Electron paramagnetic resonance (EPR) analysis as well as electrochemical tests confirmed that the non-radical pathway (1O2) is the key to biochar activation of PMS, but by restricting PB into the biochar, the radical pathway (SO4•- and •OH), the non-radical pathway (1O2), and direct electron transfer can work together to activate PMS. In addition, the degradation efficiency could remain about 80% after five-time cyclic tests. This work elucidates the role of PB nanoparticles in enhancing biochar catalysts, which can inspire the development of a carbon-neutralized, cost-effective, and effective strategy for POPs removal.

Differential photodegradation processes of adsorbed polychlorinated biphenyls on biochar colloids with various pyrolysis temperatures

Despite the crucial role of photodegradation in the environmental transformation of organic pollutants, the photodegradation process of organic pollutants irreversibly absorbed on biochar colloids (BCCs) remains poorly understood. This study investigated the photodegradation processes and mechanisms of 2,4,4'-trichlorobiphenyl (PCB28) adsorbed on BCCs released from bulk biochars derived from bamboo chips at pyrolysis temperatures of 300, 500, and 700 °C. Results show that BCCs-adsorbed PCB28 could be degraded under simulated solar illumination (95-105 mW·cm-2) but at decreased photodegradation rates compared to the dissolved PCB28. The inhibition effect of BCCs on the PCB28 photodegradation increased with increasing pyrolysis temperature. After adsorptive binding to BCCs, the half-life of PCB28 (0.1 mg/L) was prolonged from 2.65 h for the dissolved PCB28 alone in deionized water to 7.48, 40.67, and 81.82 h in the presence of BCC300, BCC500, and BCC700 (5.0 mg/L), respectively. Mechanistically, the photodegradation of adsorbed pollutants was regulated by the photogenerated free radicals and surface functional groups of the low-temperature BCCs, as well as the defects and direct electron transfer capabilities of the high-temperature BCCs; PCB28 adsorbed on the low-temperature BCCs accepted electrons from persistent free radicals under light illumination, which led to PCB28 dechlorination, followed by ring-opening oxidation through hydroxyl radical attack, ultimately resulting in progressive mineralization; singlet oxygen caused preferential ring opening of adsorbed PCB28 on the high-temperature BCCs, preceding dechlorination. The photodegradation of BCCs-adsorbed PCB28 remained significant though more or less being inhibited under the effects of water pH, ionic strength, dissolved organic matters (humic acid and fulvic acid), and in natural water samples. These findings contribute to a better understanding of the structural properties of BCCs that impact phototransformation processes of adsorbed pollutants and facilitate an accurate assessment of the environmental risk associated with biochar application.

A comprehensive review on the preparation of biochar from digestate sources and its application in environmental pollution remediation

The preparation of biochar from digestate is one of the effective ways to achieve the safe disposal and resource utilization of digestate. Nevertheless, up to now, a comprehensive review encompassing the factors influencing anaerobic digestate-derived biochar production and its applications is scarce in the literature. Therefore, to fill this gap, the present work first outlined the research hotspots of digestate in the last decade using bibliometric statistical analysis with the help of VOSviewer. Then, the characteristics of the different sources of digestate were summarized. Furthermore, the influencing factors of biochar preparation from digestate and the modification methods of digestate-derived biochar and associated mechanisms were analyzed. Notably, a comprehensive synthesis of anaerobic digestate-derived biochar applications is provided, encompassing enhanced anaerobic digestion, heavy metal remediation, aerobic composting, antibiotic/antibiotic resistance gene removal, and phosphorus recovery from digestate liquor. The economic and environmental impacts of digestate-derived biochar were also analyzed. Finally, the development prospect and challenges of using biochar from digestate to combat environmental pollution are foreseen. The aim is to not only address digestate management challenges at the source but also offer a novel path for the resourceful utilization of digestate.

Reshaping environmental sustainability: Poultry by-products digestate valorization for enhanced biochar performance in methylene blue removal

Anaerobic digestion is a highly effective and innovative method for treating organic waste while simultaneously generating energy. However, the treatment of the resulting digestate remains a challenging endeavor. To address this issue, poultry by-products digestate is used in this study to prepare biochars at two different pyrolysis temperatures (500/600 °C). Despite their potential, the utilization of untreated biochar is restricted due to its inadequate adsorption capacity. Therefore, each biochar was chemically activated using either HNO3 or KOH to synthesize four activated biochars (BC5@KOH, BC6@HNO3, BC5@HNO3, and BC6@HNO3). The aim is to investigate how the nature of chemical activation and pyrolysis temperature influence the adsorption of methylene blue dye. Characterization techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy (SEM), Raman analysis, and pHpzc determination, were exploited to comprehensively elucidate the structure and composition of both unprocessed and chemically activated biochars. Among the activated biochars, the adsorbent BC5@HNO3 exhibits the highest methylene blue (MB) adsorption capacity, reaching 101.72 mg.g-1 at 298 K under (pH = 2, ads dose = 0.6 g.L-1, shaking time of 20 min, as optimal conditions for MB adsorption. Adsorption data for each adsorbent strongly aligns with both the Langmuir isotherm model and the pseudo-second-order kinetic model. Moreover, the thermodynamic study reveals that the adsorption process was endothermic and spontaneous. The adsorption mechanism of MB dye was explored using various analytical techniques, including FTIR, SEM, PZC, and pH impact assessment. The findings suggest correlations with electrostatic interactions, hydrogen bonding, pore filling, as well as n-π and π-π interactions. Apparently, activated biochars play a crucial role in efficiently removing methylene blue dye, showcasing their potential as environmentally friendly and effective adsorbents.

Rational design of animal-derived biochar composite for peroxymonosulfate activation: Understanding the mechanism of singlet oxygen-mediated degradation of sulfamethoxazole

Animal-derived biochar are identified as a promising candidate for peroxymonosulfate (PMS) activation due to the abundant aromatics and oxygen-containing functional groups. The current investigation focuses on pig carcass-derived biochar (800-BA-PBC) by ball milling-assisted alkali activation. The results showed that 800-BA-PBC could effectively activate PMS and degraded 94.2% sulfamethoxazole (SMX, 10 mg/L) within 40 min. The reaction rate constant was found to be 47 times higher than that observed with PBC. The enhanced catalytic activity is mainly attributed to the increase in specific surface area, the increase content of oxygen-containing groups on the surface, and the formation of graphitic nitrogen. The quenching tests and electron paramagnetic resonance (EPR) analysis demonstrated that 1O2 is the main active species in the degradation of SMX. Moreover, the 800-BA-PBC + PMS system can maintain excellent degradation rate under different water quality, wide pH range, and the presence of different anions. The degradation pathways of SMX in the optimal system are also evaluated through intermediate identification and DFT calculation. These results indicate that the catalytic system has high anti-interference ability and practical application potential. This investigation provides new insight into the rational design of animal-derived biochar and develops a low-cost technology for the treatment of antibiotic containing wastewater.

Assisted wet deposition targeted synthesis of Co-N coordination single-atom catalysts for efficient Fenton-like catalytic degradation of micropollutants

Assisted wet deposition methods to localize the active phase metal on the carrier surface and prevent atomic aggregation during conventional heat treatment are strongly preferred. Herein, single-atom cobalt catalysts (SA-Co-PCN) with different metal-central content were target-prepared using a combination of impregnation and secondary annealing on polymerized carbon nitride (PCN) through reticular confinement. Fitting the coordination configuration of the Co-N pathway within the first coordination shell according to quantitative EXAFS indicated that the ligancy of Co-N was 4. The removal efficiency of representative micropollutants in the SA-Co-PCN/PMS system achieved 100% within 15 min. The outstanding degradation properties of micropollutants were ascribed to the SA-Co-PCN boosts PMS to a 1O2-dominated system. Moreover, the effects of substituents on the degradation behavior and ecotoxicology of sulfonamides (SAs) in PMS-activated systems were investigated in depth. The combination of DFT theoretical calculations and LC-MS further confirmed that the similar electron-rich sites on the SAs molecules allowed for commonality in the degradation pathway. Both S-N bond and C-S bond fragments became the initial attack and cleavage sites in the series of SAs. Ecotoxicity predictions indicated that most intermediates of SAs exhibited lower acute and chronic toxicity, especially acute toxicity, than the parent compounds. ENVIRONMENTAL IMPLICATION: Assisted wet deposition to localize the active phase metal on the carrier surface allows easy target formation of single-atom cobalt catalysts (SA-Co-PCN), which could boost PMS to a 1O2-dominated system for efficient oxidation of typical micropollutants. The degradation behavior and ecotoxicology of sulfonamides in the SA-Co-PCN/PMS system were investigated in depth, revealing that most intermediates of sulfonamides exhibited lower acute and chronic toxicity, especially acute toxicity, than the parent compounds. This work provides a strategy for the development of facilely prepared single-atom catalysts and contributes to the development and application potential of PMS advanced oxidation technology for water pollution control.

Recycling waste iron-rich algal flocs as cost-effective biochar activator for heterogeneous Fenton-like reaction towards tetracycline degradation: Important role of iron species and moderately defective structures

Harvesting aquatic harmful algal blooms (HABs) and reusing them is a promising way for antibiotic degradation. Herein, a novel iron-rich biochar (Fe-ABC), derived from algal biomass harvested by magnetic coagulation, was successfully designed and fabricated as activator for heterogeneous Fenton-like reaction. The modification methods and pyrolysis temperatures (400-800 °C) were optimized to enhance the formation of rich iron species and moderately defective structure, yielding Fe-ABC-600 with enhanced electron transfer and H2O2 activation capability. Thus, Fe-ABC-600 exhibited superior removal efficiency (95.33%) on tetracycline (TC), where the presence of multiple iron species (Fe3+, Fe2+ and Fe4+) and moderately defective structure accelerating the Fenton-like oxidation. The concentration of leaching Fe after each reaction was all below 0.74 mg/L in five cycles, ensuring the sustained degradation. And •OH was proved to be the major radical contributing to the degradation of TC, as well as the direct electron transfer mechanism together, in which the CO acted as electron regulator and electron donor. Fe-ABC as a cost-effective catalyst has notable application potentials in TC removal from wastewater owing to its remarkable advantages of high resource utilization, enhanced catalytic property, high ecological safe, notable TC degradation efficiency, low cost and environmental-friendliness.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

The performance and mechanism of tetracycline and ammonium removal by Pseudomonas sp. DX-21

To remove ammonium and tetracycline (TC) from wastewater, a new strain, DX-21, was isolated and exhibited simultaneous removal ability. The performance of DX-21 in TC removal, its removal mechanism, and the potential toxicities of the degradation products were investigated with genomics, mass spectrometry, density functional theory calculations, quantitative structure-activity relationship analyses, and Escherichia coli exposure experiments. DX-21 exhibited removal of ammonium (9.64 mg·L-1·h-1) via assimilation, and TC removal (0.85 mg·L-1·h-1) primarily occurred through cell surface bio-adsorption and biodegradation. Among the 12 identified degradation products, the majority exhibited lower toxicities than TC. Moreover, potential degradation pathways were proposed, including hydroxylation and deamination. Furthermore, DX-21 possessed TC resistance genes, various oxygenases and peroxidases that could potentially contribute to TC degradation. DX-21 colonized activated sludge and significantly enhanced the biodegradation of TC. Therefore, DX-21 showed potential for treating wastewater containing both ammonium and TC.

Merits and Limitations of Radical vs. Nonradical Pathways in Persulfate-Based Advanced Oxidation Processes

Urbanization and industrialization have exerted significant adverse effects on water quality, resulting in a growing need for reliable and eco-friendly treatment technologies. Persulfate (PS)-based advanced oxidation processes (AOPs) are emerging as viable technologies to treat challenging industrial wastewaters or remediate groundwater impacted by hazardous wastes. While the generated reactive species can degrade a variety of priority organic contaminants through radical and nonradical pathways, there is a lack of systematic and in-depth comparison of these pathways for practical implementation in different treatment scenarios. Our comparative analysis of reaction rate constants for radical vs. nonradical species indicates that radical-based AOPs may achieve high removal efficiency of organic contaminants with relatively short contact time. Nonradical AOPs feature advantages with minimal water matrix interference for complex wastewater treatments. Nonradical species (e.g., singlet oxygen, high-valent metals, and surface activated PS) preferentially react with contaminants bearing electron-donating groups, allowing enhancement of degradation efficiency of known target contaminants. For byproduct formation, analytical limitations and computational chemistry applications are also considered. Finally, we propose a holistically estimated electrical energy per order of reaction (EE/O) parameter and show significantly higher energy requirements for the nonradical pathways. Overall, these critical comparisons help prioritize basic research on PS-based AOPs and inform the merits and limitations of system-specific applications.

Conversion and impact of dissolved organic matters in a heterogeneous catalytic peroxymonosulfate system for pollutant degradation

Dissolved organic matters (DOM) are widely present in different water sources, causing significant effects on water treatment processes. Herein, the molecular transformation behavior of DOM during peroxymonosulfate (PMS) activation by biochar for organic degradation in a secondary effluent were comprehensively analyzed. Evolution of DOM was identified and inhibition mechanisms to organic degradation were elucidated. DOM underwent oxidative decarbonization (e.g., -C₂H₂O, -C₂H₆, -CH₂ and -CO₂), dehydrogenation (-2H) and dehydration reactions by ^·OH and SO₄^·-. N and S containing compounds witnessed deheteroatomisation (e.g., -NH, -NO₂+H, -SO₂, -SO₃, -SH₂), hydration (+H₂O) and N/S oxidation reactions. Among DOM, CHO-, CHON-, CHOS-, CHOP- and CHONP-containing molecules showed moderate inhibition while condensed aromatic compounds and aminosugars exhibited strong and moderate inhibition effects on contaminant degradation. The fundamental information could provide references for the rational regulation of ROS composition and DOM conversion process in a PMS system. This in turn offered theoretical guidance to minimize the interference of DOM conversion intermediates on PMS activation and degradation of target pollutants.

A critical review on correlating active sites, oxidative species and degradation routes with persulfate-based antibiotics oxidation

At present, numerous heterogeneous catalysts have been synthesized to activate persulfate (PS) and produce various reactive species for antibiotic degradation from water. However, the systematic summary of the correlation among catalyst active sites, PS activation pathway and pollutant degradation has not been reported. This review summarized the effect of metal-based, carbon-based and metal-carbon composite catalysts on the degradation of antibiotics by activating PS. Metal and non-metal sites are conducive to inducing different oxidation pathways (SO₄^•-, ^•OH radical oxidation and ¹O₂ oxidation, mediated electron transfer, surface-bound reactive complexes and high-valent metal oxidation). SO₄^•- and ^•OH are easy to attack CH, S-N, CN bonds, CC double bonds and amino groups in antibiotics. ¹O₂ is more selective to the structure of the aniline ring and amino group, and also to attacking CS, CN and CH bonds. Surface-bound active species can cleave CC, SN, CS and CN bonds. Other non-radical pathways may also induce different antibiotic degradation routes due to differences in oxidation potential and electronic properties. This critical review clarified the functions of active sites in producing different reactive species for selective oxidation of antibiotics via featured pathways. The outcomes will provide valuable guidance of oriented-regulation of active sites in heterogeneous catalysts to produce on-demand reactive species toward high-efficiency removing antibiotics from water.

Immobilization CoOOH nanosheets on biochar for peroxymonosulfate activation: Built-in electric field mediated radical and non-radical pathways

The strong electron interaction between metal oxide-carbon-based catalyst components plays a vital role in the peroxymonosulfate (PMS) activation for pollutant degradation. Herein, a novel CoOOH nanosheets anchored on rape straw-derived biochar (BC) surface (labeled as CoOOH/BC) as an efficient PMS activator toward degrading sulfamethoxazole (SMX) was synthesized. Experimental results indicated that integrating CoOOH nanosheets on the BC surface could inhibit CoOOH aggregation to increase the specific surface areas, exert a component synergistic effect to enhance activation degradation activity, and improve the catalyst stability. As a result, a 96 % degradation efficiency of SMX was achieved within 20 min over 20 wt% CoOOH/BC composite catalyst under the optimal conditions. Density functional theory (DFT) calculations disclosed that a built-in electric field (BIEF) pointing from BC to CoOOH was constructed at their interface, which could mediate PMS activation for reactive oxygen species (ROS) generation and induce direct electron transfer from SMX to PMS, resulting in efficient SMX degradation via both radical and non-radical pathways. Moreover, quenching experiments and electron paramagnetic resonance (EPR) measurements confirmed that single oxide (¹O₂) and superoxide radical (O₂^·-) are the dominant active species in the current system. Additionally, the possible SMX degradation routes were reasonably proposed based on liquid chromatography-mass spectrometry (LC-MS) results. This work provides an in-depth understanding of the role of BIEF in PMS activation, and expands the application of biochar-based materials in the field of environmental remediation.

Digestate-derived carbonized char and activated carbon: Application perspective

The flourishment of anaerobic digestion (AD) on waste treatment emphasizes the importance of digestate valorization, which plays an essential role in determining the benefits provided by the AD process. The perception of digestate gradually shifts from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. This review first outlined the current status of digestate valorization, focusing on thermal-chemical methods. The novel valorization methods were then summarized from the recent research, illustrating prospects for digestate valorization. Limits and perspectives are finally addressed. Methods for preparing digestate-derived activated carbon and impurity effects were elucidated. Inherent mineral content/inorganic impurity could be a niche for downstream use. High surface area and well-developed pore structure are essential for satisfying downstream use performance, but they are not the only factors. Digestate char applications other than use as an energy fuel are suggested.

Architecture and active motif engineering of N-CoS2@C yolk-shell nanoreactor for boosted tetracycline removal via peroxymonosulfate activation: Performance, mechanism and destruction pathways

Rational construction of yolk-shell architecture with regulated binding configuration is crucially important but challengeable for antibiotic degradation via peroxymonosulfate (PMS) activation. In this study, we report the utilization of yolk-shell hollow architecture consisted of nitrogen-doped cobalt pyrite integrated carbon spheres (N-CoS₂@C) as PMS activator to boost tetracycline hydrochloride (TCH) degradation. The creation of yolk-shell hollow structure and nitrogen-regulated active site engineering of CoS₂ endow the resulted N-CoS₂@C nanoreactor with high activity for PMS activating toward TCH degradation. Intriguingly, the N-CoS₂@C nanoreactor exhibits an optimal degradation performance with a rate constant of 0.194 min^-1 toward TCH via PMS activation. The ¹O₂ and SO₄^•- species are demonstrated as the dominant active substances for TCH degradation through quenching experiments and electron spin resonance characterization. The possible degradation mechanism, intermediates and degradation pathways for TCH removal over the N-CoS₂@C/PMS nanoreactor are unveiled. Graphitic N, sp²-hybrid carbon, oxygenated group (C-OH) and Co species are verified as the possible catalytic sites of N-CoS₂@C for PMS activation toward TCH removal. This study offers a unique strategy to engineer sulfides as highly efficient and promising PMS activators for antibiotic degradation.

Thermal effect on sulfamethoxazole degradation in a trivalent copper involved peroxymonosulfate system

Persulfate (PS) activated by thermal or homogeneous metals can generate reactive oxygen species (ROS) and high-valence-state metals for contaminants degradation, showing great potential for applications. However, thermal effect in peroxymonosulfate (PMS) system with high-valence-state metal is still ambiguous. In this study, divalent copper (Cu(II)) catalysis was taken to explore thermal effect on PMS performance. Results showed that the Sulfamethoxazole (SMX) removal efficiency in the Cu(II)/PMS system at 60 min increased by only 5.9% with temperature increase from 30 °C to 60 °C. Moreover, SMX removal efficiency was excellent at neutral or basic pH, best with PMS concentration of 2.4 mM, and slightly affected by Cu(II) concentration. The singlet oxygen (¹O₂) was identified as main active species at low temperature while sulfate radicals (SO₄^-) was more effective at high temperature with Cu(II) co-activation. Also, trivalent copper (Cu(III)) was an important active species. The higher Cu(III) content, the better SMX removal efficiency, but the stronger intermediates toxicity. In combination with removal efficiency and intermediates toxicity at different temperatures, 30 °C was the optimal reaction temperature. Overall, this study provides new perspective on utilization of waste heat and high-valence-state metal for organic wastewater treatment in PMS systems.

Covalent organic frameworks@ZIF-67 derived novel nanocomposite catalyst effectively activated peroxymonosulfate to degrade organic pollutants

Metal organic frameworks-Covalent organic frameworks (MOFs-COFs) nanocomposites could improve the catalytic performance. Herein, a novel nanocomposite catalyst (CC@Co₃O₄) derived from MOFs-COFs (COF@ZIF-67) was prepared on peroxymonosulfate (PMS) activation for bisphenol A (BPA) and rhodamine B (RhB) degradation. Owing to the Co species, oxygen vacancy (O_V), surface hydroxyl (-OH), graphite N and ketone groups (C=O), the CC@Co₃O₄ exhibited higher catalytic degradation performance and total organic carbon (TOC) for BPA (93.8% and 22.3%) and RhB (98.2% and 82.5%) with a small quantity of catalyst (0.10 g/L) and low concentration of PMS (0.20 g/L) even without pH adjustment. Sulfate radicals (•SO₄^-), hydroxyl radicals (•OH), single oxygen (¹O₂), superoxide radicals (•O₂^-) and electron transfer process were all involved in the degradation of BPA and RhB. Among them, the degradation of BPA and RhB mainly depended on •O₂^- and ¹O₂, respectively. Meanwhile, the degradation pathways of BPA and RhB were proposed, and the biotoxicity of the degradation products was evaluated by freshwater chlorella. The results illustrated that the degradation products were environmentally friendly to organisms. In addition, the role of COF in the nanocomposites was also studied. The addition of COF remarkably improved the catalytic performance of CC@Co₃O₄ due to the faster electron transfer, more graphite N and C=O. Overall, this work may open the door to the development of COF-based catalysts in the field of water pollutant remediation.

MnOx@N-doped carbon nanosheets derived from Mn-MOFs and g-C3N4 for peroxymonosulfate activation: Electron-rich Mn center induced by N doping

The fabrication of metal-carbon hybrids with heteroatom doping from manganese-metal organic frameworks (MOFs) has rarely been reported for peroxymonosulfate (PMS) activation. In this work, novel MnO_x@N-doped carbon (MnO_x@NC) nanosheets were prepared using 2D manganese-1,4 benzenedicarboxylic acid-based MOFs (Mn-MOFs) and different proportions of graphitic carbon nitride (g-C₃N₄, additional N source and carbon source) to activate PMS for sulfamethoxazole (SMX) removal. The polarization difference induced by Mn-N coordination during the carbonization process made C an electron-poor center and Mn an electron-rich center, thus providing more Mn(II) for PMS activation. Benefiting from the highest Mn(II) content, the most uniform and exposed MnO_x active sites, abundant N active species and rich defective sites, MnO_x@NC-20 showed excellent degradation (72.9% within 5 min) and mineralization performance (47.40% within 60 min) for SMX. Nonradical and radical processes worked together in MnO_x@NC-20/PMS/SMX system, where singlet oxygen (¹O₂) dominated the degradation of SMX. N-doped carbon not only exhibited dragging and protection effects on MnO_x, but also provided adsorption sites for PMS and pollutants, thus reducing their migration distance. Moreover, the electrons of organic substrates could be captured by the electron-poor carbon layer and then transported to the electron-rich Mn center, thus improving the utilization efficiency of PMS and the redox of Mn. This study provides a facile optimization method to prepare MOFs-derived carbon catalysts with improved stability and catalytic performance.

The calcium alginate-immobilized Co-g-C3N4 composite microspheres as an efficient mediator to activate peroxymonosulfate for degrading organic pollutants

Poor water stability and difficult separation severely limited the application of Co-based catalysts in persulfate activation. Herein, for the first time, the calcium alginate-immobilized Co-g-C₃N₄-2 composite microspheres were prepared by a feasible method. Notably, embedding Co ion into g-C₃N₄ can improve its specific surface area and electrochemical activities. More significantly, as-prepared Co-g-C₃N₄-2 microsphere presented excellent catalytic performance in PMS activation for the degradation of TC. For the activation mechanisms of PMS over Co-g-C₃N₄-2 microspheres, the calcium alginate microspheres could mediate the direct electron transfer between TC and PMS, while both radical and nonradical pathways were involved in the activation of PMS over Co-g-C₃N₄-2. Meanwhile, SO₄^•-, OH^•, O₂^•- and ¹O₂ were major reactive oxygen species formed in the Co-g-C₃N₄-2 microsphere/PMS system. Proposed Co-g-C₃N₄-2 microsphere/PMS system still exhibited great degradation ability towards TC over a wide pH range, and co-existing anions had weak influence on TC degradation over Co-g-C₃N₄-2 microsphere/PMS system. Moreover, the construction of Co-g-C₃N₄-2 microspheres not only avoided the release of metal ion from catalyst, but also provided convenience for the recovery of catalyst. In short, current work shared some novel insights into the application of heterogeneous catalysis in persulfate activation for wastewater treatment.

Fabrication of superhydrophobic Enteromorpha-derived carbon aerogels via NH4H2PO4 modification for multi-behavioral oil/water separation

Hydrophobic and oleophilic biomass-based block materials are considered to be highly promising candidates used for oil/water separation. However, the crucial hydrophobic modification process often involves various toxic and hazardous organic substances or requires high energy inputs. Inspired by the flame retardant principle of phosphorus-containing flame retardants, herein, an Enteromorpha-derived carbon (ADP-EP) aerogel with a water contact angle of 144.2° was prepared by successive freeze-shaping, freeze-drying and low-temperature carbonization treatment (300 °C), using NH₄H₂PO₄ (ADP) as a modifier. The results demonstrated that the introduction of NH₄H₂PO₄ could largely facilitate the removal of oxygenated groups from the pristine EP aerogels and enhance their surface roughness, thereby achieving surface hydrophobic modification. Featuring intrinsic low density, rich porosity and strong lipophilicity, the as-fabricated ADP-EP aerogels exhibited exceptional performance in both oil spill adsorption (~140 g/g) and water-in-oil emulsion separation. Moreover, the good reusability for oil uptake was also realized thanks to its robust mechanical compressibility and thermal stability. This work provides a facile, economical and eco-friendly route to obtain a desirable hydrophobic/oleophilic surface.

A Mini Review on Persulfate Activation by Sustainable Biochar for the Removal of Antibiotics

Antibiotic contamination in water bodies poses ecological risks to aquatic organisms and humans and is a global environmental issue. Persulfate-based advanced oxidation processes (PS-AOPs) are efficient for the removal of antibiotics. Sustainable biochar materials have emerged as potential candidates as persulfates (Peroxymonosulfate (PMS) and Peroxydisulfate (PDS)) activation catalysts to degrade antibiotics. In this review, the feasibility of pristine biochar and modified biochar (non-metal heteroatom-doped biochar and metal-loaded biochar) for the removal of antibiotics in PS-AOPs is evaluated through a critical analysis of recent research. The removal performances of biochar materials, the underlying mechanisms, and active sites involved in the reactions are studied. Lastly, sustainability considerations for future biochar research, including Sustainable Development Goals, technical feasibility, toxicity assessment, economic and life cycle assessment, are discussed to promote the large-scale application of biochar/PS technology. This is in line with the global trends in ensuring sustainable production.

Degradation of 4-nonylphenol in marine sediments using calcium peroxide activated by water hyacinth (Eichhornia crassipes)-derived biochar

The contamination of marine sediments by 4-nonylphenol (4-NP) has become a global environmental problem, therefore there are necessaries searching appropriate and sustainable remediation methods for in-situ applications. Herein, water hyacinth [(WH) (Eichhornia crassipes)]-derived metal-free biochar (WHBC) prepared at 300-900 °C was used to promote the calcium peroxide (CP)-mediated remediation of 4-NP-contaminaed sediments. At [CP] = 4.37 × 10^-4 M, [WHBC] = 1.5 g L^-1, and pH = 6.0, the degradation of 4-NP was 77% in 12 h following the pseudo-first order rate law with rate constant (k_obs) of 4.2 × 10^-2 h^-1. The efficient 4-NP degradation performance and reaction mechanisms of the WHBC/CP system was ascribed to the synergy between the reactive species (HO• and ¹O₂) at the WHBC surface on which there were abundant electron-rich carbonyl groups and defects/vacancies in the catalyst structure provides active sites, and the ability of the graphitized carbon framework to act as a medium for electron shuttling. According to microbial community analysis based on amplicon sequence variants, bacteria of the genus Solirubrobacter (Actinobacteria phylum) were dominant in WHBC/CP-treated sediments and were responsible for the biodegradation of 4-NP. The results showed great promise and novelty of the hydroxyl radical-driven carbon advanced oxidation processes (HR-CAOPs) that relies on the value-added utilization of water hyacinth for contaminated sediment remediation in achieving circular bioeconomy.

Metal-free carbocatalysts derived from macroalga biomass (Ulva lactuca) for the activation of peroxymonosulfate toward the remediation of polycyclic aromatic hydrocarbons laden marine sediments and its impacts on microbial community

Potential toxic chemicals, specifically, polycyclic aromatic hydrocarbons (PAHs), are major sediment contaminants. Herein, green seaweed (Ulva lactuca) was used as a feedstock and pyrolyzed at temperature in the range between 300 and 900 °C. The metal-free carbocatalyst (GSBC) for peroxymonosulfate (PMS) activation to degrade PAHs contaminated sediments was studied. The effects of GSBC‒PMS treatment on microbial community abundance was studied as well. The pyrolysis temperature of GSBC preparation affected the PMS activation performance. Results show that GSBC700 exhibited remarkable catalytic characteristics in PAHs degradation by effective activation of PMS. The results also demonstrated that the sulfate radical-carbon-driven advanced oxidation processes (SR-CAOP) reaction achieved 87% and apparent rate constant (k_obs) of 6.3 × 10^-2 h^-1 of total PAHs degradation in 24 h at 3.3 g/L of GSBC, PMS dose of 1 × 10^-4 M, and pH 3.0. The degradation of 2-, 3-, 4-, 5-, and 6-ring PAHs was 84, 83, 83, 80, and 89%, respectively. The synergetic effect established between GSBC and PMS enhanced the formation of ROSs, namely, SO₄^-, HO, and ¹O₂, which were major species contributing to PAHs degradation. The synergistic effect of π‒π stacking structure and graphitization of GSBC formed electron shuttle, which contributed to PAHs degradation performance. Microbial community structure analyses in the GSBC‒PMS treated sediments showed that the relative abundance of Lactobacillus_rhamnosus species, most of which belonged to the Lactobacillus genus and Firmicutes phylum, which aided in continuing PAHs biodegradation post GSBC‒PMS treatment. Therefore, GSBC can be a promising carbocatalyst produced via biomass-to-biochar conversion as biowaste-to-energy source used in the SR-CAOP-mediated process for sediment remediation.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Simultaneous recovery of phosphate and degradation of antibiotics by waste sludge-derived biochar

Recovery of phosphorus (P) from wastewater has led to growing public concern considering its scarcity and future availability as well as its detrimental environmental impacts. However, the recovered P is inevitably contaminated with co-existing antibiotics like tetracycline (TC) and sulfamethazine (SMT) which will pose serious risks to the health of human and animals after being spread to the environment. In this study, we propose a novel scheme that can recover P from synthetic wastewater and at the same time degrade the co-existing antibiotics. To achieve such a goal, a series of biochar (BC) were prepared from calcination of waste sludge and were used both as the adsorbent for P recovery and as the catalyst for peroxymonosulfate (PMS) activation and antibiotic degradation. Results showed that the sludge source (i.e. S_m: municipal sludge, S_p: paper mill sludge), calcination atmosphere (i.e. air-deficient, N₂, vacuum) and temperature (i.e. 600 and 800 °C) exhibited significant influence on P adsorption capacity. Generally, the BC calcined in N₂ showed better P uptake, and increase of calcination temperature from 600 °C to 800 °C could further improve P uptake. Though BC_p-N-600 (prepared from S_p in N₂ at 600 °C) showed faster and higher P uptake (56.3 mg/g) than its counterpart BC_m-N-600 (33.2 mg/g), BC_m-N-600 showed stronger catalytic activity and more stable performance in the complex pollutant system (P + SMT). It was proposed that P was recovered primarily through the chemisorption and precipitation mechanism, while SMT was nearly completely degraded primarily by the ROS generated from PMS activation.

Application of Biochar as Functional Material for Remediation of Organic Pollutants in Water: An Overview

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

Degradation of sulfadiazine in aqueous media by peroxymonosulfate activated with biochar-supported ZnFe2O4 in combination with visible light in an internal loop-lift reactor

Solid waste resource utilization and the treatment of wastewater are two important aspects in environmental protection. Here, biochar (BC) derived from municipal sewage sludge has been combined with ZnFe₂O₄ to form the photocatalyst ZnFe₂O₄/biochar (ZnFe/BC), and it was used to degrade sulfadiazine (SDZ) in the presence of peroxymonosulfate (PMS) under visible (Vis) light irradiation in an internal loop-airlift reactor (ALR). The surface morphology and structure of ZnFe/BC have been characterized by X-ray diffraction (XRD), scanning electron microscopy equipped with an attachment for energy-dispersive spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS). ZnFe/BC displays outstanding photocatalytic performance and reusability. After four reuse cycles of ZnFe/BC in the Vis/ZnFe/BC/PMS system, the SDZ degradation rate and efficiency still reached 0.082 min⁻¹ and 99.05%, respectively. Reactive species in this system included free radicals SO₄˙⁻, ˙OH, and ˙O₂⁻, as well as non-radicals ¹O₂, e⁻, and h⁺, as established from the results of chemical quenching experiments and electron paramagnetic resonance (EPR) analyses. Moreover, a mechanism of action of the Vis/ZnFe/BC/PMS system for SDZ degradation was proposed. The acute toxicity of the reaction solution towards Photobacterium phosphoreum T3 spp. in the Vis/ZnFe/BC/PMS process increased during the first 40 min and then decreased, illustrating that Vis/ZnFe/BC/PMS provided an effective and safe method for the removal of SDZ.

Solid waste resource utilization and the treatment of wastewater are two important aspects in environmental protection.

Active sites decoration on sewage sludge-red mud complex biochar for persulfate activation to degrade sulfanilamide

Active sites on catalyst surface play significant roles in oxidative species formation. The work focused on the regulation of main active sites on catalyst surface and oxidative species formation. Herein, sewage sludge (SS)-red mud (RM) complex biochar (SRCB) and N-functionalized SRCB (NSRCB) were served as activators of peroxymonosulfate (PMS) for sulfanilamide (SMX) degradation. Specially, NSRCB-1 showed excellent catalytic performance with 97.5% removal of SMX within 110 min. Additionally, the effects of N incorporation on the reconstruction of N species, conversion of intrinsic Fe species and ketonic CO groups in SRCB were studied systematically. Both radical (hydroxyl radicals (OH), sulfate radicals (SO₄^-) and superoxide radical (O₂^-)) and non-radical (electron transfer and singlet oxygen (¹O₂)) pathways were confirmed by quenching experiments, electron paramagnetic resonance (EPR) testing and electrochemical measurements. Ketonic CO groups, pyridinic N and pyrrolic N were responsible for non-radical pathway in SMX degradation process. Besides, Fe(II) modulated by N-doping was the main actives site for radicals generation. The contribution of active sites on catalyst surface to oxidative species formation provided fundamental basis for practical water treatment in PMS process.