405 nm light technology for the inactivation of pathogens and its potential role for environmental disinfection and infection control

The potential role of violet-blue light to preventing hospital acquired infections: a systematic review

Healthcare-associated infections (HAIs) are a major challenge in modern healthcare, leading to increased mortality, financial burden and negative societal impact. The World Health Organization (WHO) and others have highlighted the alarming rise in HAIs, exacerbated by antimicrobial resistance (AMR), which further complicates treatment. The efficacy of violet-blue light (VBL) technology (approximately 405–420 nm) in inactivating various pathogens and its safety for human exposure have been extensively studied. This study analyses the scientific literature on the use of VBL as a disinfection method in health care settings, with cost and safety implications. It discusses VBL in comparison to other disinfection methods, the implications of its use, and its potential in reducing HAIs due to its ability to be used in occupied environments. While UV technology is more effective at bacterial inactivation, the continuous application of VBL compensates for this difference. UV and VBL technologies have a positive environmental impact, eliminating the need for consumables and reducing waste. Safety concerns are very limited for VBL compared to UV when properly used. The literature highlights that implementing VBL can be a significant step in continuous environmental disinfection in both healthcare and domestic settings. VBL is safe for occupants and offers a feasible, green method for combating environmental contamination and potentially reducing HAIs.

Escaping the ESKAPE pathogens: A review on antibiofilm potential of nanoparticles

ESKAPE pathogens, a notorious consortium comprising Enterococcusfaecium, Staphylococcusaureus, Klebsiellapneumoniae, Acinetobacterbaumannii, Pseudomonasaeruginosa, and Enterobacter species, pose formidable challenges in healthcare settings due to their multidrug-resistant nature. The increasing global cases of antimicrobial-resistant ESKAPE pathogens are closely related to their remarkable ability to form biofilms. Thus, understanding the unique mechanisms of antimicrobial resistance of ESKAPE pathogens and the innate resilience of biofilms against traditional antimicrobial agents is important for developing innovative strategies to establish effective control methods against them. This review offers a thorough analysis of biofilm dynamics, with a focus on the general mechanisms of biofilm formation, the significant contribution of persister cells in the resistance mechanisms, and the recurrence of biofilms in comparison to planktonic cells. Additionally, this review highlights the potential strategies of nanoparticles for managing biofilms in the ESKAPE group of pathogens. Nanoparticles, with their unique physicochemical properties, provide promising opportunities for disrupting biofilm structures and improving antimicrobial effectiveness. The review has explored interactions between nanoparticles and biofilms, covering a range of nanoparticle types such as metal, metal-oxide, surface-modified, and functionalized nanoparticles, along with organic nanoparticles and nanomaterials. The additional focus of this review also encompasses green synthesis techniques of nanoparticles that involve plant extract and supernatants from bacterial and fungal cultures as reducing agents. Furthermore, the use of nanocomposites and nano emulsions in biofilm management of ESKAPE is also discussed. To conclude, the review addresses the current obstacles and future outlooks in nanoparticle-based biofilm management, stressing the necessity for further research and development to fully exploit the potential of nanoparticles in addressing biofilm-related challenges.

Understanding the Role of Biofilms in Acute Recurrent Tonsillitis through 3D Bioprinting of a Novel Gelatin-PEGDA Hydrogel

Acute recurrent tonsillitis is a chronic, biofilm-related infection that is a significant burden to patients and healthcare systems. It is often treated with repeated courses of antibiotics, which contributes to antimicrobial resistance. Studying biofilms is key to understanding this disease. In vitro modelling using 3D bioprinted hydrogels is a promising approach to achieve this. A novel gelatin-PEGDA pseudomonas fluorescens-laden bioink was developed and bioprinted in a 3D hydrogel construct fabricated using computer-aided design to mimic the tonsillar biofilm environment. The bioprinted constructs were cultured at 37 °C in lysogeny broth for 12 days. Bacterial growth was assessed by spectrophotometry. Cellular viability analysis was conducted using optical fluorescence microscopy (FDA/PI staining). A biocompatible 3D-printed bacteria-laden hydrogel construct was successfully fabricated. Bacterial growth was observed using optical fluorescence microscopy. A live/dead cellular-staining protocol demonstrated bacterial viability. Results obtained after the 12-day culture period showed higher bacterial growth in the 1% gelatin concentration construct compared to the 0% control. This study demonstrates the first use of a bacteria-laden gelatin-PEGDA hydrogel for biofabrication of a 3D-printed construct designed to model acute recurrent tonsillitis. Initiating a study with clinically relevant ex vivo tonsil bacteria will be an important next step in improving treatment of this impactful but understudied disease.

The Preclinical Validation of 405 nm Light Parasiticidal Efficacy on Leishmania donovani in Ex Vivo Platelets in a Rag2-/- Mouse Model

Violet-blue light of 405 nm in the visible spectrum at a dose of 270 J/cm2 alone has been shown to be an effective microbicidal tool for inactivating several bacteria, HIV-1, and Trypanosoma cruzi in ex vivo plasma and platelets. Unlike chemical- and ultraviolet (UV)-based pathogen inactivation methods for plasma and platelet safety, 405 nm light is shown to be less toxic to host cells at light doses that are microbicidal. In this report, we evaluated the parasiticidal activity of a 405 nm light treatment on platelets spiked with the Leishmania donovani parasite. Following the light treatment, parasite viability was observed to be near zero in both low- and high-titer-spiked platelets relative to controls. Furthermore, to test the residual infectivity after inactivation in vivo, the light-treated low-titer L. donovani-spiked platelets were evaluated in an immunodeficient Rag2-/- mouse model and monitored for 9 weeks. The parasiticidal efficacy of 405 nm light was evident from the lack of a presence of parasites in the mice spleens. Parasiticidal activity was confirmed to be mediated through 405 nm light-induced reactive oxygen species (ROS), as quantitatively measured by a 2',7'-Dichlorodihydrofluorescein diacetate (H2DCFDA)-based assay. Overall, these results confirm the complete inactivation of L. donovani spiked in ex vivo platelets by 405 nm light treatment and exemplify the utility of the Rag2-/- mouse infection model for the preclinical validation of the parasiticidal efficacy of 405 nm light and this light-based technology as a potential PRT for ex vivo platelets.

Efficacy of Violet-Blue (405 nm) LED Lamps for Disinfection of High-Environmental-Contact Surfaces in Healthcare Facilities: Leading to the Inactivation of Microorganisms and Reduction of MRSA Contamination

Effective disinfection procedures in healthcare facilities are essential to prevent transmission. Chemical disinfectants, hydrogen peroxide vapour (HPV) systems and ultraviolet (UV) light are commonly used methods. An emerging method, violet-blue light at 405 nm, has shown promise for surface disinfection. Its antimicrobial properties are based on producing reactive oxygen species (ROS) that lead to the inactivation of pathogens. Studies have shown significant efficacy in reducing bacterial levels on surfaces and in the air, reducing nosocomial infections. The aim of this study was to evaluate the antimicrobial effectiveness of violet-blue (405 nm) LED lamps on high-contact surfaces in a hospital infection-control laboratory. High-contact surfaces were sampled before and after 7 days of exposure to violet-blue light. In addition, the effect of violet-blue light on MRSA-contaminated surfaces was investigated. Exposure to violet-blue light significantly reduced the number of bacteria, yeasts and moulds on the sampled surfaces. The incubator handle showed a low microbial load and no growth after irradiation. The worktable and sink showed an inconsistent reduction due to shaded areas. In the second experiment, violet-blue light significantly reduced the microbial load of MRSA on surfaces, with a greater reduction on steel surfaces than on plastic surfaces. Violet-blue light at 405 nm has proven to be an effective tool for pathogen inactivation in healthcare settings Violet-blue light shows promise as an additional and integrated tool to reduce microbial contamination in hospital environments but must be used in combination with standard cleaning practices and infection control protocols. Further research is needed to optimise the violet-blue, 405 nm disinfection method.

Viricidal Efficacy of a 405-nm Environmental Decontamination System for Inactivation of Bacteriophage Phi6: Surrogate for SARS-CoV-2

The highly transmittable nature of SARS-CoV-2 has increased the necessity for novel strategies to safely decontaminate public areas. This study investigates the efficacy of a low irradiance 405-nm light environmental decontamination system for the inactivation of bacteriophage phi6 as a surrogate for SARS-CoV-2. Bacteriophage phi6 was exposed to increasing doses of low irradiance (~0.5 mW cm-2 ) 405-nm light while suspended in SM buffer and artificial human saliva at low (~103-4  PFU mL-1 ) and high (~107-8  PFU mL-1 ) seeding densities, to determine system efficacy for SARS-CoV-2 inactivation and establish the influence of biologically relevant suspension media on viral susceptibility. Complete/near-complete (≥99.4%) inactivation was demonstrated in all cases, with significantly enhanced reductions observed in biologically relevant media (P < 0.05). Doses of 43.2 and 172.8 J cm-2 were required to achieve ~3 log10 reductions at low density, and 97.2 and 259.2 J cm-2 achieved ~6 log10 reductions at high density, in saliva and SM buffer, respectively: 2.6-4 times less dose was required when suspended in saliva compared to SM buffer. Comparative exposure to higher irradiance (~50 mW cm-2 ) 405-nm light indicated that, on a per unit dose basis, 0.5 mW cm-2 treatments were capable of achieving up to 5.8 greater log10 reductions with up to 28-fold greater germicidal efficiency than that of 50 mW cm-2 treatments. These findings establish the efficacy of low irradiance 405-nm light systems for inactivation of a SARS-CoV-2 surrogate and demonstrate the significant enhancement in susceptibility when suspended in saliva, which is a major vector in COVID-19 transmission.

Synergistic effects of sequential light treatment with 222-nm/405-nm and 280-nm/405-nm wavelengths on inactivation of foodborne pathogens

Light-based technologies of different wavelengths can inactivate pathogenic microorganisms, but each wavelength has its limitations. This work explores the potential of sequential treatments with different wavelengths for enhancing the disinfection performance of individual treatments by employing various bactericidal mechanisms. The effectiveness, inactivation kinetics, and bactericidal mechanisms of treatments with 222/405, 280/405, and 405 nm alone against Escherichia coli O157:H7, Listeria monocytogenes, Staphylococcus aureus, Salmonella Typhimurium, and Pseudomonas aeruginosa were evaluated. Inactivation experiments were performed in thin liquid bacterial suspensions that were treated either individually with 48 h of 405-nm light or sequentially with (i) 30 s of 222-nm far-UV-C light, followed by 48 h of 405-nm light, or (ii) 30 s of 280-nm far-UV-C light, followed by 48 h of 405-nm light. Survivors were recovered and enumerated by standard plate counting. All inactivation curves were non-linear and followed the Weibull model (0.99 ≥ R2 ≥ 0.70). Synergistic effects were found for E. coli, L. monocytogenes, and S. Typhimurium, with maximum inactivation level increases of 2.9, 3.3, and 1.1 log CFU after the sequential treatments, respectively. Marginal synergy was found for S. aureus, and an antagonistic effect was found for P. aeruginosa after sequential treatments. Significant differences in reactive oxygen species accumulation were found (P < 0.05) after various treatment combinations, and the performance of sequential treatments was correlated with cellular oxidative damage. The sequential wavelength treatments proposed demonstrate the potential for enhanced disinfection of multiple foodborne pathogens compared with individual wavelength treatments, which can have significant food safety benefits. IMPORTANCE Nonthermal light-based technologies offer a chemical-free method to mitigate microbial contamination in the food and healthcare industries. However, each individual wavelength has different limitations in terms of efficacy and operating conditions, which limits their practical applicability. In this study, bactericidal synergism of sequential treatments with different wavelengths was identified. Pre-treatments with 280 and 222 nm enhanced the disinfection performance of follow-up 405-nm treatments for multiple foodborne pathogens by inducing higher levels of cellular membrane damage and oxidative stress. These findings deliver useful information for light equipment manufacturers, food processors, and healthcare users, who can design and optimize effective light-based systems to realize the full potential of germicidal light technologies. The results from the sequential treatments offer practical solutions to improve the germicidal efficacy of visible light systems, as well as provide inspiration for future hurdle disinfection systems design, with a positive impact on food safety and public health.

Impacts of Surface Characteristics and Dew Point on the Blue-Light (BL405) Inactivation of Viruses

The increased prevalence of multidrug-resistant organisms (MDROs), healthcare associated infections (HAIs), and the recent COVID-19 pandemic has caused the photoinactivation industry to explore alternative wavelengths. Blue light (BL405) has gained significant interest as it is much less harmful to the skin and eyes than traditional germicidal wavelengths; therefore, in theory, it can be used continuously with human exposure. At present, the viricidal effects of BL405 are largely unknown as the literature predominately addresses bacterial disinfection performed with this wavelength. This work provides novel findings to the industry, reporting on the virucidal effects of BL405 on surfaces. This research utilizes three surfaces: ceramic, PTFE, and stainless steel. The efficacy of BL405 inactivation varied by surface type, which was due to surface characteristics, such as the contact angle, porosity, zeta potential, and reflectivity. Additionally, the effect of the dew point on BL405 inactivation efficacy was determined. This research is the first to study the effects of the dew point on the virucidal effectiveness of BL405 surface inactivation. The effects of the dew point were significant for all surfaces and the control experiments. The high-dew-point conditions (18 °C) yielded higher levels of BL405 inactivation and viral degradation for the experiments and controls, respectively.

Using photon disinfection technologies for reducing bioburden in hospitals

BACKGROUND

Environmental cleaning and disinfection is the basis of the prevention of healthcare-acquired infections (HAIs).

AIM

This study aimed to describe photon disinfection technologies (PDTs), report their impact on inactivating micro-organisms and preventing HAIs and to create recommendations for their implementation in hospital settings.

METHODS

An integrated literature review was completed to evaluate and report the impact of PDTs in hospital settings. The quality of 23 articles were assessed, their contents analysed and results reported according to the PICOT model.

FINDINGS

The microbiological impact of the PDT varied by micro-organism, settings and according to the used devices. It was crucial that environmental cleaning was completed before the disinfection.

CONCLUSION

The implementation of PDT in the hospital setting requires inquiry from the viewpoints of microbiological, environmental, occupational, technical and human safety. To enhance the safe implementation of PDTs, the construction and use of evidence-based global standards for PDT are crucial.

Photoinactivation and Photoablation of Porphyromonas gingivalis

Several types of phototherapy target human pathogens and Porphyromonas gingivitis (Pg) in particular. The various approaches can be organized into five different treatment modes sorted by different power densities, interaction times, effective wavelengths and mechanisms of action. Mode 1: antimicrobial ultraviolet (aUV); mode 2: antimicrobial blue light (aBL); mode 3: antimicrobial selective photothermolysis (aSP); mode 4: antimicrobial vaporization; mode 5: antimicrobial photodynamic therapy (aPDT). This report reviews the literature to identify for each mode (a) the putative molecular mechanism of action; (b) the effective wavelength range and penetration depth; (c) selectivity; (d) in vitro outcomes; and (e) clinical trial/study outcomes as these elements apply to Porphyromonas gingivalis (Pg). The characteristics of each mode influence how each is translated into the clinic.

An Approach to Improve Energy Efficiency during Antimicrobial Blue Light Inactivation: Application of Pulse-Width Modulation Dimming to Balance Irradiance and Irradiation Time

Antimicrobial blue light (aBL) is an effective non-destructive inactivation technique and has received increasing attention. Despite its significance, the existing research has not thoroughly delved into the impacts of irradiance and irradiation time on enhancing energy efficiency during aBL inactivation and the explanation of the enhancement effect of pulse exposure. In this paper, a series of Escherichia coli inactivation experiments with different duty cycles, pulse frequencies, and irradiation times were conducted, and the relative concentrations of reactive oxygen species (ROS) were measured under corresponding conditions. A two-dimensional (2-D) Hom model was proposed to evaluate the effect of irradiance and irradiation time. The results show that, compared to continuous exposure, pulsed aBL (duty cycle = 25%) can save ~37% of the energy to achieve the same inactivation effect and generate a 1.95 times higher ROS concentration. The 2-D Hom model obtains the optimal combination of average irradiance and time according to the desired reduction and shows that the irradiation time has a higher weight than the irradiance (1.677 and 1.083, respectively). Therefore, using pulse exposure with a lower average irradiance for a longer period of time can achieve a better inactivation effect when consuming equivalent energy. The proposed pulse-width modulation dimming approach helps promote the application of the aBL technique.

A singlet state oxygen generation model based on the Monte Carlo method of visible antibacterial blue light inactivation

Visible antibacterial blue light (VABL) has received much attention recently as a nondestructive inactivation approach. However, due to the sparse distribution of bacteria, the light energy evaluation method used in existing studies is inaccurate. Thus, the sensitivity of microorganisms to VABL in different experiments cannot be compared. In this paper, a Monte Carlo-based photon transport model with the optimized scattering phase function was constructed. The model calculated the spatial light energy distribution and the temporal distribution of cumulative singlet state oxygen (CSO) under various cell and medium parameters. The simulation results show that when the cells are sparsely distributed, <30% of light energy from the light source is absorbed by microbes and participates in photochemical reactions. The CSO produced increases with cell density and cell size. Little light energy is available, and thus, the concentration of CSO produced is insufficient to inactivate microbes at deeper depths. As the light intensity and inactivation time increased, the production of singlet state oxygen tended to level off. The model proposed here can quantify the generation of singlet state oxygen and provide a more accurate light energy guide for the VABL inactivation process.

Effectiveness of purple led for inactivation of Bacillus subtilis and Escherichia coli bacteria in in vitro sterilizers

Bacteria are inactivated using a technique called photodynamic inactivation, which combines light with a photosensitizer with the right spectrum. The objective of this study is to ascertain the e­ciency of purple LEDs for photoinactivating Bacillus subtilis and Escherichia coli bacteria as well as the ideal purple LED exposure energy density. This study technique involves exposing bacteria to purple LED radiation. Two elements of variation are used during irradiation. The first variation is the illumination variation at distances of 3 cm, 6 cm, 9 cm, and 12 cm. The second variation involves changing the amount of radiation for 30, 60, 90, and 120 minutes. The Total Plate Count (TPC) method was used to count the number of colonies. Statistical tests were utilized in data analysis, namely the One Way Anova test (analysis of variance). The results of this study indicated that 395 nm purple LED irradiation caused a decrease in Log CFU/mL of Bacillus subtilis and Escherichia coli bacteria. Inactivation of Bacillus subtilis bacteria showed a higher mortality percentage than Escherichia coli bacteria. Changes in other irradiation distances also showed a higher percentage of death for Bacillus subtilis bacteria than Escherichia coli bacteria. The highest percentage of death was 98.5% for Bacillus subtilis bacteria and 94.3% for Escherichia coli bacteria at position C with an irradiation distance of 3 cm and an energy density of 524 J/cm2 with an LED exposure time of 120 minutes. This shows that the percentage of death of bacteria Bacillus subtilis and Escherichia coli increased with increasing doses of LED energy with the greatest percentage of death in Gram-positive bacteria Bacillus subtilis.

Quercetin mediated antimicrobial photodynamic treatment using blue light on Escherichia coli O157:H7 and Listeria monocytogenes

Interest in using an antimicrobial photodynamic treatment (aPDT) for the microbial decontamination of food has been growing. In this study, quercetin, a substance found ubiquitously in plants, was used as a novel exogenous photosensitizer with 405 nm blue light (BL) for the aPDT on foodborne pathogens, and the inactivation mechanism was elucidated. The inactivation of Escherichia coli O157:H7 and Listeria monocytogenes in PBS solution by the quercetin and BL combination treatment reached a log reduction of 6.2 and more than 7.55 at 80 J/cm² (68 min 21 s), respectively. When EDTA was added to investigate the reason for different resistance between two bacteria, the effect of aPDT was enhanced against E. coli O157:H7 but not L. monocytogenes. This result indicated that the lipopolysaccharide of Gram-negative bacteria operated as a protective barrier. It was experimentally demonstrated that quercetin generated the superoxide anion and hydrogen peroxide as the reactive oxygen species that oxidize and inactivate cell components. The damage to the bacterial cell membrane by aPDT was evaluated by propidium iodide, where the membrane integrity significantly (P < 0.05) decreased from 40 J/cm² compared to control. In addition, DNA integrity of bacteria was significantly (P < 0.05) more decreased after aPDT than BL treatment. The inactivation results could be applied in liquid food industries for decontamination of foodborne pathogens, and the mechanisms data was potentially utilized for further studies about aPDT using quercetin.

Validating Methods To Eradicate Plant-Pathogenic Ralstonia Strains Reveals that Growth In Planta Increases Bacterial Stress Tolerance

Plant-pathogenic bacteria in the Ralstonia solanacearum species complex (RSSC) cause highly destructive bacterial wilt disease of diverse crops. Wilt disease prevention and management is difficult because RSSC persists in soil, water, and plant material. Growers need practical methods to kill these pathogens in irrigation water, a common source of disease outbreaks. Additionally, the R. solanacearum race 3 biovar 2 (R3bv2) subgroup is a quarantine pest in many countries and a highly regulated select agent pathogen in the United States. Plant protection officials and researchers need validated protocols to eradicate R3bv2 for regulatory compliance. To meet these needs, we measured the survival of four R3bv2 and three phylotype I RSSC strains following treatment with hydrogen peroxide, stabilized hydrogen peroxide (Huwa-San), active chlorine, heat, UV radiation, and desiccation. No surviving RSSC cells were detected after cultured bacteria were exposed for 10 min to 400 ppm hydrogen peroxide, 50 ppm Huwa-San, 50 ppm active chlorine, or temperatures above 50°C. RSSC cells on agar plates were eradicated by 30 s of UV irradiation and killed by desiccation on most biotic and all abiotic surfaces tested. RSSC bacteria did not survive the cell lysis steps of four nucleic acid extraction protocols. However, bacteria in planta were more difficult to kill. Stems of infected tomato plants contained a subpopulation of bacteria with increased tolerance of heat and UV light, but not oxidative stress. This result has significant management implications. We demonstrate the utility of these protocols for compliance with select agent research regulations and for management of a bacterial wilt outbreak in the field. IMPORTANCE Bacteria in the Ralstonia solanacearum species complex (RSSC) are globally distributed and cause destructive vascular wilt diseases of many high-value crops. These aggressive pathogens spread in diseased plant material and via contaminated soil, tools, and irrigation water. A subgroup of the RSSC, race 3 biovar 2, is a European and Canadian quarantine pathogen and a U.S. select agent subject to stringent and constantly evolving regulations intended to prevent pathogen introduction or release. We validated eradication and inactivation methods that can be used by (i) growers seeking to disinfest water and manage bacterial wilt disease outbreaks, (ii) researchers who must remain in compliance with regulations, and (iii) regulators who are expected to define containment practices. Relevant to all these stakeholders, we show that while cultured RSSC cells are sensitive to relatively low levels of oxidative chemicals, desiccation, and heat, more aggressive treatment, such as autoclaving or incineration, is required to eradicate plant-pathogenic Ralstonia growing inside plant material.

Direct dentin bleaching: Would it be possible?

This study aims to evaluate in vitro the effect of violet LED when applied directly to dentin tissue pigmented by different substances. We analyzed the chromatic alteration, the bleaching effect and the temperature variation. Hence, 60 bovine dentin tissue discs were divided into five groups: NNatural Pigmentation; T-Black Tea; C-Soluble Coffee; W-Red Wine; B-Equine Blood. Individualized pigmentation protocols were performed and all groups reached the same chromatic change value. Subsequently, we simultaneously performed a bleaching session and measured temperature variation using a K-type thermocouple device. Data on chromatic change (∆E, ∆E00, ∆a, ∆b and ∆L), whitening effect (WID) and temperature variation were subjected to one-way Anova and Tukey's post-test at a 5% significance level. The C group showed the most relevant chromatic change values, similar to the N group, responding positively to the treatment. However, the B group differed from the control group, which showed difficulty to respond to the treatment. Regarding the whitening index, only the W group showed lower results than the others. The B group showed the greatest temperature changes. We conclude that the violet LED offered chromatic change, which generated a bleaching effect. Pigmentations with red wine and blood showed the greatest difficulty to respond to treatment, also promoting a higher temperature rise in teeth pigmented with blood.

Efficacy of violet-blue light to inactive microbial growth

The increase in health care-associated infections and antibiotic resistance has led to a growing interest in the search for innovative technologies to solve these problems. In recent years, the interest of the scientific community has focused on violet-blue light at 405 nm (VBL405). This study aimed to assess the VBL405 efficiency in reducing microbial growth on surfaces and air. This descriptive study run between July and October 2020. Petri dishes were contaminated with P. aeruginosa, E. coli, S. aureus, S. typhimurium, K. pneumoniae and were placed at 2 and 3 m from a LED light source having a wavelength peak at 405 nm and an irradiance respectively of 967 and 497 µW/cm². Simultaneously, the air in the room was sampled for 5 days with two air samplers (SAS) before and after the exposition to the VBL405 source. The highest microbial reduction was reached 2 m directly under the light source: S. typhimurium (2.93 log₁₀), K. pneumoniae (2.30 log₁₀), S. aureus (3.98 log₁₀), E. coli (3.83 log₁₀), P. aeruginosa (3.86 log₁₀). At a distance of 3 m from the light source, the greatest reduction was observed for S. aureus (3.49 log₁₀), and P. aeruginosa (3.80 log₁₀). An average percent microbial reduction of about 70% was found in the sampled air after 12 h of exposure to VBL405. VBL405 has proven to contrast microbial growth on the plates. Implementing this technology in the environment to provide continuous disinfection and to control microbial presence, even in the presence of people, may be an innovative solution.

The Wavelength-Based Inactivation Effects of a Light-Emitting Diode Module on Indoor Microorganisms

With the increased incidence of infectious disease outbreaks in recent years such as the COVID-19 pandemic, related research is being conducted on the need to prevent their spread; it is also necessary to develop more general physical-chemical control methods to manage them. Consequently, research has been carried out on light-emitting diodes (LEDs) as an effective means of light sterilization. In this study, the sterilization effects on four types of representative bacteria and mold that occur indoors, Bacillus subtilis, Escherichia coli, Penicillium chrysogenum, and Cladosporium cladosporidides, were confirmed using LED modules (with wavelengths of 275, 370, 385, and 405 nm). Additionally, power consumption was compared by calculating the time required for 99.9% sterilization of each microorganism. The results showed that the sterilization effect was high, in the order 275, 370, 385, and 405 nm. The sterilization effects at 385 and 405 nm were observed to be similar. Furthermore, when comparing the power consumption required for 99.9% sterilization of each microorganism, the 275 nm LED module required significantly less power than those of other wavelengths. However, at 405 nm, the power consumption required for 99.9% sterilization was less than that at 370 nm; that is, it was more efficient and similar to or less than that at 385 nm. Additionally, because 405 nm can be applied as general lighting, it was considered to have wider applicability and utility compared with UV wavelengths. Consequently, it should be possible to respond to infectious diseases in the environment using LEDs with visible light wavelengths.

The effect of indoor daylight spectrum and intensity on viability of indoor pathogens on different surface materials

Built environments play a key role in the transmission of infectious diseases. Ventilation rates, air temperature, and humidity affect airborne transmission while cleaning protocols, material properties and light exposure can influence viability of pathogens on surfaces. We investigated how indoor daylight intensity and spectrum through electrochromic (EC) windows can impact the growth rate and viability of indoor pathogens on different surface materials (polyvinyl chloride [PVC] fabric, polystyrene, and glass) compared to traditional blinds. Results showed that tinted EC windows let in higher energy, shorter wavelength daylight than those with clear window and blind. The growth rates of pathogenic bacteria and fungi were significantly lower in spaces with EC windows compared to blinds: nearly 100% growth rate reduction was observed when EC windows were in their clear state followed by 41%-100% reduction in bacterial growth rate and 26%-42% reduction in fungal growth rate when EC windows were in their darkest tint. Moreover, bacterial viabilities were significantly lower on PVC fabric when they were exposed to indoor light at EC-tinted window. These findings are deemed fundamental to the design of healthy modern buildings, especially those that encompass sick and vulnerable individuals.

Effects of tooth bleaching protocols with violet LED and hydrogen peroxide on enamel properties

BACKGROUND

This study evaluated the color change, enamel surface roughness and microhardness after different tooth bleaching protocols, using hydrogen peroxide (HP) and/or violet LED.

METHODS

Forty bovine specimens (7 × 7 × 2 mm) were randomly distributed into 4 groups: 35% HP, 6% HP, 6% HP + violet LED and violet LED alone. First, the specimens were stained with black tea and then submitted to two bleaching sessions of 30 min with an interval of 7 days. Color change (∆L*, ∆a*, ∆b* and ∆E00) after 24 h of each session and 1 week after the last session was evaluated. Enamel roughness and microhardness were evaluated immediately before the sessions, 24 h and 1 week after the last session. Data were evaluated by ANOVA for repeated measures and Bonferroni post-test or Kruskall-Wallis and Dunn tests (α = 0.05). Representative specimens from each group were analyzed by scanning electron microscopy.

RESULTS

6% HP + violet LED and 35% HP showed the highest color change, while violet LED alone had the lowest results. Enamel roughness analyses showed that 6% HP + violet LED and 35% HP showed changes after two bleaching sessions. No differences were observed regarding enamel microhardness.

CONCLUSIONS

The use of 6% HP + violet LED showed enhanced bleaching efficacy compared to 35% HP. However, violet LED used alone exhibited the lowest color change. 6% HP + violet LED and 35% HP promoted changes on enamel roughness, while no microhardness changes was observed for any group.

Violet-blue Light Induces "Natural" Photodynamic Plasma Disinfection with Endogenous Sensitizers

Naturally, endogenous porphyrins can provide sensitized disinfection power, and to photobiologists' delight, violet-blue light has potential virtues. But progress is needed before violet-blue light treatment can used for microbe treatment of blood samples, and yet safeguard against plasma protein photooxidation. A report by Maclean et al. in this issue of Photochemistry & Photobiology on microbe reduction of blood samples showing negligible competing protein photooxidation may bring that goal a step closer.

Dining in Blue Light Impairs the Appetite of Some Leaf Epiphytes

Background: The phyllosphere is subjected to fluctuating abiotic conditions. This study examined the phenotypic plasticity (PP) of four selected non-phototrophic phyllosphere bacteria [control strain: Pseudomonas sp. DR 5-09; Pseudomonas agarici, Bacillus thuringiensis serovar israeliensis (Bti), and Streptomyces griseoviridis (SG)] regarding their respiration patterns and surfactant activity as affected by light spectrum and nutrient supply.

Methods: The PP of the strains was examined under four light regimes [darkness (control); monochromatic light-emitting diodes (LED) at 460 nm (blue) and 660 nm (red); continuously polychromatic white LEDs], in the presence of 379 substrates and conditions.

Results: Light treatment affected the studied bacterial strains regarding substrate utilization (Pseudomonas strains > SG > Bti). Blue LEDs provoked the most pronounced impact on the phenotypic reaction norms of the Pseudomonas strains and Bti. The two Gram-positive strains Bti and SG, respectively, revealed inconsistent biosurfactant formation in all cases. Biosurfactant formation by both Pseudomonas strains was supported by most substrates incubated in darkness, and blue LED exposure altered the surface activity profoundly. Blue and white LEDs enhanced biofilm formation in PA in highly utilized C-sources. Putative blue light receptor proteins were found in both Pseudomonas strains, showing 91% similarity with the sequence from NCBI accession number WP_064119393.

Conclusion: Light quality–nutrient interactions affect biosurfactant activity and biofilm formation of some non-phototrophic phyllosphere bacteria and are, thus, crucial for dynamics of the phyllosphere microbiome.

Interdental Plaque Microbial Community Changes under In Vitro Violet LED Irradiation

Oral microbiome dysbiosis has important links to human health and disease. Although photodynamic therapy influences microbiome diversity, the specific effect of violet light irradiation remains largely unknown. In this study, we analyzed the effect of violet light-emitting diode (LED) irradiation on interdental plaque microbiota. Interdental plaque was collected from 12 human subjects, exposed to violet LED irradiation, and cultured in a specialized growth medium. Next-generation sequencing of the 16S ribosomal RNA genes revealed that α-diversity decreased, whereas β-diversity exhibited a continuous change with violet LED irradiation doses. In addition, we identified several operational taxonomic units that exhibited significant shifts during violet LED irradiation. Specifically, violet LED irradiation led to a significant reduction in the relative abundance of Fusobacterium species, but a significant increase in several species of oral bacteria, such as Veillonella and Campylobacter. Our study provides an overview of oral plaque microbiota changes under violet LED irradiation, and highlights the potential of this method for adjusting the balance of the oral microbiome without inducing antibiotic resistance.

Efficiency of ultraviolet light for disinfection of fertile broiler eggs

ABSTRACT This study aimed to evaluate the effectiveness of ultraviolet light in reducing bacterial load of eggshells and the impact of experimental disinfection on hatching, embryo mortality, and time-borne distribution using broiler breeder hens of different ages (38, 42, and 48 weeks old). Fertile eggs were subjected to different exposure periods (5, 7, and 9 minutes) of UV light (UV-C) with a 254 nm wavelength. For controls, eggs disinfected with paraformaldehyde (5.3 g/m3) and eggs not disinfected (NC). After subjection to disinfection protocols, the eggs were placed into sterile plastic bags containing 20 mL of peptone saline solution (0.1% m:v) and massaged for 1 minute to release the bacterial load. Aliquots of this solution were incubated in specific medium for bacterial growth for 48 hours at 37ºC for subsequent CFU counts. To evaluate the effects of disinfection on production, eggs previously disinfected by UV-C (9 min) and paraformaldehyde and NC eggs were candled between incubation days 10 and 13 and at the end of the incubation period to assess embryonic mortality. Hatchability distribution was performed every 8 hours. The 9 minutes 254nm UV-C light exposure was able to disinfect viable eggs and matched the effectiveness of the paraformaldehyde technique.

The virucidal effects of 405 nm visible light on SARS-CoV-2 and influenza A virus

The germicidal potential of specific wavelengths within the electromagnetic spectrum is an area of growing interest. While ultra-violet (UV) based technologies have shown satisfactory virucidal potential, the photo-toxicity in humans coupled with UV associated polymer degradation limit their use in occupied spaces. Alternatively, longer wavelengths with less irradiation energy such as visible light (405 nm) have largely been explored in the context of bactericidal and fungicidal applications. Such studies indicated that 405 nm mediated inactivation is caused by the absorbance of porphyrins within the organism creating reactive oxygen species which result in free radical damage to its DNA and disruption of cellular functions. The virucidal potential of visible-light based technologies has been largely unexplored and speculated to be ineffective given the lack of porphyrins in viruses. The current study demonstrated increased susceptibility of lipid-enveloped respiratory pathogens of importance such as SARS-CoV-2 (causative agent of COVID-19) and influenza A virus to 405 nm, visible light in the absence of exogenous photosensitizers thereby indicating a potential alternative porphyrin-independent mechanism of visible light mediated viral inactivation. These results were obtained using less than expected irradiance levels which are considered safe for humans and commercially achievable. Our results support further exploration of the use of visible light technology for the application of continuous decontamination in occupied areas within hospitals and/or infectious disease laboratories, specifically for the inactivation of respiratory pathogens such as SARS-CoV-2 and Influenza A.

Blue Light in Dermatology

Phototherapy is an important method of dermatological treatments. Ultraviolet (280-400 nm) therapy is of great importance; however, there are concerns of its long-term use, as it can lead to skin aging and carcinogenesis. This review aims to evaluate the role and the mechanism of action of blue light (400-500 nm), a UV-free method. The main mediators of cellular responses to blue light are nitric oxide (NO) and reactive oxygen species (ROS). However, the detailed mechanism is still not fully understood. It was demonstrated that blue light induces an anti-inflammatory and antiproliferative effect; thus, it may be beneficial for hyperproliferative and chronic inflammatory skin diseases such as atopic dermatitis, eczema, and psoriasis. It was also found that blue light might cause the reduction of itching. It may be beneficial on hair growth and may be used in the treatment of acne vulgaris by reducing follicular colonization of Propionibacterium acnes. Further studies are needed to develop accurate protocols, as the clinical effects depend on the light parameters as well as the treatment length. There are no major adverse effects observed yet, but long-term safety should be monitored as there are no studies considering the long-term effects of blue light on the skin.

The review of the light parameters and mechanisms of Photobiomodulation on melanoma cells

Photobiomodulation (PBM) uses low-intensity visible or near-infrared light to produce beneficial effects on cells or tissues, such as brain therapy, wound healing. Still there is no consistent recommendation on the parameters (dose, light mode, wavelength, irradiance) and protocols (repetition, treatment duration) for its clinical application. Herein, we summarize the current PBM parameters for the treatment of melanoma, and we also discuss the potential photoreceptors and downstream signaling mechanisms in the PBM treatment of melanoma cells. It is hypothesized that PBM may inhibit the melanoma cells by activating mitochondria, OPNs, and other receptors. Regardless of the underlying mechanisms, PBM has been shown to be beneficial in treating melanoma. Through further in-depth studies of the underlying potential mechanisms, it can strengthen the applications of PBM for the therapy of melanoma.

Enzymatic activity of the blue light-regulated phosphodiesterase BlrP1 from Klebsiella pneumoniae shows a nonlinear dependence on light intensity

The blue light-regulated phosphodiesterase BlrP1 from Klebsiella pneumoniae hydrolyzes cyclic dimeric guanosine monophosphate (GMP) in a blue light-dependent manner. It contains a photosensing BLUF domain and a functional EAL domain. Previously, it was reported that conformational changes in the dimer upon light illumination occurred only when both protomers of the dimer were excited. Based on this observation, it was proposed that BlrP1 might be a nonlinear light intensity sensor. To test this, here, the correlation between the turnover number of the hydrolysis reaction (k_cat ) and the fraction of the excited protein (f_red ) was measured by simultaneously monitoring the reaction rate and f_red . Our results show that k_cat is proportional to f_red ² . Thus, BlrP1 works as a nonlinear light intensity sensor to sense a strong light environment.

Biogenic Gold Nanoparticles Decrease Methylene Blue Photobleaching and Enhance Antimicrobial Photodynamic Therapy

Antibiotic resistance is a growing concern that is driving the exploration of alternative ways of killing bacteria. Here we show that gold nanoparticles synthesized by the mycelium of Mucor plumbeus are an effective medium for antimicrobial photodynamic therapy (PDT). These particles are spherical in shape, uniformly distributed without any significant agglomeration, and show a single plasmon band at 522–523 nm. The nanoparticle sizes range from 13 to 25 nm, and possess an average size of 17 ± 4 nm. In PDT, light (from a source consisting of nine LEDs with a peak wavelength of 640 nm and FWMH 20 nm arranged in a 3 × 3 array), a photosensitiser (methylene blue), and oxygen are used to kill undesired cells. We show that the biogenic nanoparticles enhance the effectiveness of the photosensitiser, methylene blue, and so can be used to kill both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The enhanced effectiveness means that we could kill these bacteria with a simple, small LED-based light source. We show that the biogenic gold nanoparticles prevent fast photobleaching, thereby enhancing the photoactivity of the methylene blue (MB) molecules and their bactericidal effect.

Postharvest LED lighting: effect of red, blue and far red on quality of minimally processed broccoli sprouts

BACKGROUND

The main objective of this study was to evaluate physiological and quality changes of minimally processed broccoli sprouts illuminated during postharvest storage under blue, red and far-red LED lighting as compared to darkness or illumination with fluorescent light, as control treatments.

RESULTS

Morphological and microbiological changes were determined during 15 days at 5 °C. In addition, total antioxidant activity and bioactive compound changes throughout the shelf life were also monitored. Results showed that far-red LED lighting increased hypocotyl and sprout length, decreased microbial growth and improved the total antioxidant and scavenging activities, compared to darkness and fluorescent lighting treatments. However, it did not stimulate the biosynthesis of phenolic acids. In contrast, blue LED light reduced by 50% the total antioxidant capacity of broccoli sprouts compared to far-red treatment, as well as morphological development. In addition, total scavenging activity was increased under far-red LED light compared with the other treatments by 12-10% (darkness and fluorescence) and 33-31% (blue and red LEDs).

CONCLUSIONS

Our results suggest that minimally processed sprouts may benefit from LED lighting during shelf life in terms of quality, although further experiments should be conducted to optimize a proper exposure cycle and intensity aiming for use in the distribution chain. The results also open the way for further development towards the integration of this technology in the food distribution chain.

Cavity Disinfection With a 445 nm Diode Laser Within the Scope of Restorative Therapy - A Pilot Study

Introduction: Cavity disinfection is necessary to prevent a progressive infection of the crown dentin and pulp. Increasing intolerance and resistance to antiseptics and antibiotics as well as the controversy over the effects of those on the dental hard tissue and composite have prompted the investigation of alternative treatment options. The objective of this pilot study is to evaluate the antibacterial potential of a diode laser with a wavelength of 445 nm in the cavity preparation using the bacterium Streptococcus salivarius associated with caries in conjunction with the characteristics and influences of dentin on light transmission. Methods: The bactericidal effect of the laser irradiation was determined in culture experiments by using caries-free human dentin samples on bacteria-inoculated agar. For this, dentin discs (horizontally cut coronal dentin) of 500 µm and 1000 µm thicknesses were produced and irradiated with the laser with irradiation parameters of 0.7-1 W in a cw-mode and exposure times of between 5-30 s. Based on the different sample thicknesses, the penetration depth effect of the irradiation was ascertained after the subsequent incubation of the bacteria-inoculated agar. Additional influential parameters on the irradiation transmission were investigated, including surface moisture, tooth color as well as the presence of a smear layer on the dentin surface. Results: The optical transmission values of the laser radiation for dentin were significantly dependent on the sample thickness (P = 0.006) as well as its moisture content (P = 0.013) and were independent of the presence of a smear layer. There was a 40% reduction in bacteria after the radiography of the 500-µm-thick dentin samples, which was shown as the lowest laser dose (443 J/cm²). Conclusion: These findings indicate that the diode laser with light emission at a wavelength of 445 nm is interesting for the supportive cavity disinfection within the scope of caries therapy and show potential for clinical applications.

Challenges and Opportunities of Light-Emitting Diode (LED) as Key to Modulate Antioxidant Compounds in Plants. A Review

Plant antioxidants are important compounds involved in plant defense, signaling, growth, and development. The quantity and quality of such compounds is genetically driven; nonetheless, light is one of the factors that strongly influence their synthesis and accumulation in plant tissues. Indeed, light quality affects the fitness of the plant, modulating its antioxidative profile, a key element to counteract the biotic and abiotic stresses. With this regard, light-emitting diodes (LEDs) are emerging as a powerful technology which allows the selection of specific wavelengths and intensities, and therefore the targeted accumulation of plant antioxidant compounds. Despite the unique advantages of such technology, LED application in the horticultural field is still at its early days and several aspects still need to be investigated. This review focused on the most recent outcomes of LED application to modulate the antioxidant compounds of plants, with particular regard to vitamin C, phenols, chlorophyll, carotenoids, and glucosinolates. Additionally, future challenges and opportunities in the use of LED technology in the growth and postharvest storage of fruits and vegetables were also addressed to give a comprehensive overview of the future applications and trends of research.

Enhancing solar disinfection (SODIS) with the photo-Fenton or the Fe2+/peroxymonosulfate-activation process in large-scale plastic bottles leads to toxicologically safe drinking water

Solar disinfection (SODIS) in 2-L bottles is a well-established drinking water treatment technique, suitable for rural, peri‑urban, or isolated communities in tropical or sub-tropical climates. In this work, we assess the enlargement of the treatment volume by using cheap, large scale plastic vessels. The bactericidal performance of SODIS and two solar-Fe²⁺ based enhancements, namely photo-Fenton (light/H₂O₂/Fe²⁺) and peroxymonosulfate activation (light/PMS/Fe²⁺) were assessed in 19-L polycarbonate (PC) and 25-L polyethylene terephthalate (PET) bottles, in ultrapure and real water matrices (tap water, lake Geneva water). Although SODIS always reached total (5-logU) inactivation, under solar light, enhancement by or both Fe²⁺/H₂O₂ or Fe²⁺/PMS was always beneficial and led to an increase in bacterial elimination kinetics, as high as 2-fold in PC and PET bottles with tap water for light/H₂O₂/Fe²⁺, and 8-fold in PET bottles with Lake Geneva water. The toxicological safety of the enhancements and their effects on the plastic container materials was assessed using the E-screen assay and the Ames test, after 1-day or 1-week exposure to SODIS, photo-Fenton and persulfate activation. Although the production of estrogenic compounds was observed, we report that no treatment method, duration of exposure or material resulted in estrogenicity risk for humans, and similarly, no mutagenicity risk was measured. In summary, we suggest that SODIS enhancement by either HO^•- or SO₄^•--based advanced oxidation process is a suitable enhancement of bacterial inactivation in large scale plastic bottles, without any associated toxicity risks.

Control Measures for SARS-CoV-2: A Review on Light-Based Inactivation of Single-Stranded RNA Viruses

SARS-CoV-2 is a single-stranded RNA virus classified in the family Coronaviridae. In this review, we summarize the literature on light-based (UV, blue, and red lights) sanitization methods for the inactivation of ssRNA viruses in different matrixes (air, liquid, and solid). The rate of inactivation of ssRNA viruses in liquid was higher than in air, whereas inactivation on solid surfaces varied with the type of surface. The efficacy of light-based inactivation was reduced by the presence of absorptive materials. Several technologies can be used to deliver light, including mercury lamp (conventional UV), excimer lamp (UV), pulsed-light, and light-emitting diode (LED). Pulsed-light technologies could inactivate viruses more quickly than conventional UV-C lamps. Large-scale use of germicidal LED is dependent on future improvements in their energy efficiency. Blue light possesses virucidal potential in the presence of exogenous photosensitizers, although femtosecond laser (ultrashort pulses) can be used to circumvent the need for photosensitizers. Red light can be combined with methylene blue for application in medical settings, especially for sanitization of blood products. Future modelling studies are required to establish clearer parameters for assessing susceptibility of viruses to light-based inactivation. There is considerable scope for improvement in the current germicidal light-based technologies and practices.

Antimicrobial effect of photodynamic therapy using sinoporphyrin sodium and 390-400 nm light-emitting diode on Porphyromonas gingivalis in vitro

This study aims to investigate the effect of antimicrobial photodynamic therapy (a-PDT) using a novel combination of sinoporphyrin sodium (DVDMS) and light-emitting diode (LED) with a wavelength of 390-400 nm on Porphyromonas gingivalis in vitro. Absorption spectrum of DVDMS was determined by spectrometer for selecting suitable wavelength light source. The uptake of DVDMS by P. gingivalis was evaluated according to fluorescence intensity detected by a spectrometer. Then effects of DVDMS alone, 390-400 nm LED alone, and photodynamic therapy produced by 10, 20, 40, and 80 μg/mL DVDMS and 390-400 nm LED on the suspension of P. gingivalis were evaluated by counting the number of colony forming units (CFU) after incubation. In the experiment, the LED illumination time was 30, 60, 90, 120, 180, 240, and 360 s, respectively, and the corresponding energy density was 1, 2, 3, 4, 6, 8, and 12 J/cm², respectively. According to the absorption spectrum of DVDMS, the 390-400-nm light emitted by the LED was selected as the light source. The fluorescence intensity of DVDMS on P. gingivalis increased significantly at 5 min, and with the extension of time, it decreased at 30 min. DVDMS alone did not produce a significant toxicity on P. gingivalis compared with PBS (p = 0.979). While 390-400 nm LED alone had a certain bactericidal effect on P. gingivalis, the bactericidal effect was more obvious as the light dose increased (p < 0.001). The effect of a-PDT produced by 20, 40, and 80 μg/mL DVDMS and 390-400 nm LED were significantly better than that of 390-400 nm LED alone (p < 0.05). Both DVDMS concentration and light dose could enchance the bactericidal effect. The strongest photo-killing effect was generated by 80 μg/mL DVDMS with 360 s illumination (energy density is 12 J/cm²), and the log reduction of bacteria was 5.69 ± 1.70. a-PDT using the combination of DVDMS with 390-400 nm LED shows promise as a new treatment modality for pathogens elimination in periodontal therapy.

Evidence of hypericin photoinactivation of E. faecalis: From planktonic culture to mammalian cells selectivity up to biofilm disruption

Antimicrobial Photodynamic Therapy (aPDT) is an alternative for microbiological inactivation. The aPDT is a method that uses a photosensitizer (PS) excited by visible light at the appropriate wavelength and the molecular oxygen present in the tissues resulting in the production of reactive oxygen species, which causes oxidative damage to biological molecules. This study aimed to perform an in vitro experimental sequence for photoinactivation of E. faecalis using Hypericin (HY) from planktonic culture to selectivity assays using mammalian cells up to biofilm. The results show that E. faecalis rapidly absorb HY. The levels of inactivation of E. faecalis reached up to 99% in planktonic culture. Transmission and Scanning Electron Microscopy demonstrate the remarkable morphological alterations resulting from photooxidation being the loss of membrane integrity assessed by fluorescence microscopy combined with a LIVE/DEAD™ kit. HY did not present cytotoxicity to the fibroblasts cell at the used conditions proving to be a selective molecule. Finally, 60% of photoinactivation was observed in the biofilm of E. faecalis when subject to HY-aPDT. These outcomes show the advantages of sequential in vitro experiments besides showing that HY is a potential PS for clinical trials due to its selectivity and photodynamic effect. This study also draws attention to the benefits of using methodologies that can evidence the antimicrobial effect beyond the typical constellation of cell death.

Visible Light as an Antimicrobial Strategy for Inactivation of Pseudomonas fluorescens and Staphylococcus epidermidis Biofilms

The increase of antimicrobial resistance is challenging the scientific community to find solutions to eradicate bacteria, specifically biofilms. Light-Emitting Diodes (LED) represent an alternative way to tackle this problem in the presence of endogenous or exogenous photosensitizers. This work adds to a growing body of research on photodynamic inactivation using visible light against biofilms. Violet (400 nm), blue (420 nm), green (570 nm), yellow (584 nm) and red (698 nm) LEDs were used against Pseudomonas fluorescens and Staphylococcus epidermidis. Biofilms, grown on a polystyrene surface, were irradiated for 4 h. Different irradiance levels were investigated (2.5%, 25%, 50% and 100% of the maximum irradiance). Surviving cells were quantified and the inactivation kinetic parameters were estimated. Violet light could successfully inactivate P. fluorescens and S. epidermidis (up to 6.80 and 3.69 log10 reduction, respectively), while blue light was effective only against P. fluorescens (100% of maximum irradiance). Green, yellow and red irradiation neither increased nor reduced the biofilm cell density. This is the first research to test five different wavelengths (each with three intensities) in the visible spectrum against Gram-positive and Gram-negative biofilms. It provides a detailed study of the potential of visible light against biofilms of a different Gram-nature.

An assessment of a hybrid lighting system that employs ultraviolet-A for mitigating healthcare-associated infections in a newborn intensive care unit

Reducing healthcare-associated infections is critically important. A new hybrid lighting system technology, designed to provide both visible white light and disinfecting UV-A (λmax = 366 nm) radiation, was retrofitted into a modern hospital newborn intensive care unit. The UV-A dosing was set to levels calculated to be safe for human occupation (maximum of 10 W m−2 for 8 hours at eye level). Eight-hour exposures at 3 W m−2 on newborn intensive care unit counter surfaces were effective for suppressing selected pathogens identified by the Centers for Disease Control and Prevention as problematic for healthcare facilities. Professional staff accepted the hybrid lighting system, although its implementation in this newborn intensive care unit was not completely satisfactory. An analysis of photodegrading effects suggested that UV-A resistant equipment and furnishing may need to be installed with this technology. The present findings should form the foundation for the next generation of this lighting technology.

Spectrum of virucidal activity from ultraviolet to infrared radiation

The COVID-19 pandemic has sparked a demand for safe and highly effective decontamination techniques for both personal protective equipment (PPE) and hospital and operating rooms. The gradual lifting of lockdown restrictions warrants the expansion of these measures into the outpatient arena. Ultraviolet C (UVC) radiation has well-known germicidal properties and is among the most frequently reported decontamination techniques used today. However, there is evidence that wavelengths beyond the traditional 254 nm UVC - namely far UVC (222 nm), ultraviolet B, ultraviolet A, visible light, and infrared radiation - have germicidal properties as well. This review will cover current literature regarding the germicidal effects of wavelengths ranging from UVC through the infrared waveband with an emphasis on their activity against viruses, and their potential applicability in the healthcare setting for general decontamination during an infectious outbreak.

Ultraviolet A/blue light-emitting diode therapy for vulvovaginal candidiasis: a case presentation

Vulvovaginal candidiasis (VVC) is a frequent infection of the female genitourinary tract. It is considered the second most common genital infection in women, after bacterial vaginosis. VVC is treated with oral or topical azole derivatives. However, these agents may lead to adverse reactions and their chronic use might lead to resistance to antifungal agents. Given that the ultraviolet A/blue light-emitting diode (LED) is an electromagnetic radiation source with antimicrobial properties, it is hypothesized that this resource may be a non-drug alternative to the treatment of vulvovaginitis. A technical/experimental safety test was conducted to characterize the light source spectrum and temperature generation of the device, followed by a pilot study in a 52-year-old patient with a clinical diagnosis of VVC confirmed by culture and examination of fresh vaginal samples, owing to the presence of lumpy vaginal discharge and a complaint of pruritus. The vulva and vagina were exposed to 401 ± 5 nm ultraviolet A/blue LED irradiation in a single session, divided into two applications. A reassessment was performed 21 days after the treatment. The light-emitting device had a visible spectrum, in the violet and blue ranges, and a maximum temperature increase of 7 °C. During the reassessment, the culture was found to be negative for fungus, and the signs and symptoms of the patient had disappeared. A light-emitting device with a spectrum in the range of 401 ± 5 nm could potentially be an alternative treatment modality for women with VVC, as it led to the resolution of clinical and microbiological problems in our patient.

Exposure to Broad-Spectrum Visible Light Causes Major Transcriptomic Changes in Listeria monocytogenes EGDe

Listeria monocytogenes, the causative agent of the serious foodborne disease listeriosis, can rapidly adapt to a wide range of environmental stresses, including visible light. This study shows that exposure of the L. monocytogenes EGDe strain to low-intensity, broad-spectrum visible light inhibited bacterial growth and caused altered multicellular behavior during growth on semisolid agar compared to when the bacteria were grown in complete darkness. These light-dependent changes were observed regardless of the presence of the blue light receptor (Lmo0799) and the stressosome regulator sigma B (SigB), which have been suggested to be important for the ability of L. monocytogenes to respond to blue light. A genome-wide transcriptional analysis revealed that exposure of L. monocytogenes EGDe to broad-spectrum visible light caused altered expression of 2,409 genes belonging to 18 metabolic pathways compared to bacteria grown in darkness. The light-dependent differentially expressed genes are involved in functions such as glycan metabolism, cell wall synthesis, chemotaxis, flagellar synthesis, and resistance to oxidative stress. Exposure to light conferred reduced bacterial motility in semisolid agar, which correlates well with the light-dependent reduction in transcript levels of flagellar and chemotaxis genes. Similar light-induced reduction in growth and motility was also observed in two different L. monocytogenes food isolates, suggesting that these responses are typical for L. monocytogenes Together, the results show that even relatively small doses of broad-spectrum visible light cause genome-wide transcriptional changes, reduced growth, and motility in L. monocytogenesIMPORTANCE Despite major efforts to control L. monocytogenes, this pathogen remains a major problem for the food industry, where it poses a continuous risk of food contamination. The ability of L. monocytogenes to sense and adapt to different stressors in the environment enables it to persist in many different niches, including food production facilities and in food products. The present study shows that exposure of L. monocytogenes to low-intensity broad-spectrum visible light reduces its growth and motility and alters its multicellular behavior. Light exposure also caused genome-wide changes in transcript levels, affecting multiple metabolic pathways, which are likely to influence the bacterial physiology and lifestyle. In practical terms, the data presented in this study suggest that broad-spectrum visible light is an important environmental variable to consider as a strategy to improve food safety by reducing L. monocytogenes contamination in food production environments.

Violet-Blue Light Arrays at 405 Nanometers Exert Enhanced Antimicrobial Activity for Photodisinfection of Monomicrobial Nosocomial Biofilms

This study reports the efficacy of VBL and blue light (BL) and their antimicrobial activity against mature biofilms of a range of important nosocomial pathogens. While this study investigated the antibacterial activity of a range of wavelengths of between 375 and 450 nm and identified a specific wavelength region (∼405 nm) with increased antibacterial activity, decontamination was dependent on the bacterial species, strain, irradiation parameters, and experimental conditions. Further research with controlled experiments that ameliorate the heating effects and improve the optical properties are required to optimize the dosing parameters to advance the successful clinical translation of this technology.

Light-emitting diodes (LEDs) demonstrate therapeutic effects for a range of biomedical applications, including photodisinfection. Bands of specific wavelengths (centered at 405 nm) are reported to be the most antimicrobial; however, there remains no consensus on the most effective irradiation parameters for optimal photodisinfection. The aim of this study was to assess decontamination efficiency by direct photodisinfection of monomicrobial biofilms using a violet-blue light (VBL) single-wavelength array (SWA) and multiwavelength array (MWA). Mature biofilms of nosocomial bacteria (Acinetobacter baumannii, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus) were grown on 96-well polypropylene PCR plates. The biofilms were then exposed to VBL for 2,700 s (SWA) and 1,170 s (MWA) to deliver 0 to 670 J/cm², and the antibacterial activity of VBL was assessed by comparing the seeding of the irradiated and the nonirradiated biofilms. Nonirradiated groups were used as controls. The VBL arrays were characterized optically (spectral irradiance and beam profile) and thermally. The SWA delivered 401-nm VBL and the MWA delivered between 379-nm and 452-nm VBL, albeit at different irradiances and with different beam profiles. In both arrays, the irradiated groups were exposed to increased temperatures compared to the nonirradiated controls. All bacterial isolates were susceptible to VBL and demonstrated reductions in the seeding of exposed biofilms compared with the nonirradiated controls. VBL at 405 nm exerted the most antimicrobial activity, exhibiting reductions in seeding of up to 94%. Decontamination efficiency is dependent on the irradiation parameters, bacterial species and strain, and experimental conditions. Controlled experiments that ameliorate the heating effects and improve the optical properties are required to optimize the dosing parameters to advance the successful clinical translation of this technology.

IMPORTANCE This study reports the efficacy of VBL and blue light (BL) and their antimicrobial activity against mature biofilms of a range of important nosocomial pathogens. While this study investigated the antibacterial activity of a range of wavelengths of between 375 and 450 nm and identified a specific wavelength region (∼405 nm) with increased antibacterial activity, decontamination was dependent on the bacterial species, strain, irradiation parameters, and experimental conditions. Further research with controlled experiments that ameliorate the heating effects and improve the optical properties are required to optimize the dosing parameters to advance the successful clinical translation of this technology.

Safety Evaluation of a 405-nm LED Device for Direct Antimicrobial Treatment of the Murine Brain

Antimicrobial resistance is a growing problem in human medicine that extends to biomedical research. Compared with chemical-based therapies, light-based therapies present an alternative to traditional pharmaceuticals and are less vulnerable to acquired bacterial resistance. Due to immunologic privilege and relative tissue sensitivity to topical antibiotics, the brain poses a unique set of difficulties with regard to antimicrobial therapy. This study focused on 405-nm 'true violet' light-which has been shown to kill multiple clinically relevant bacterial species in vitro yet leave mammalian cells unscathed-and its effect on the murine brain. We built a 405-nm LED array, validated its power and efficacy against a clinical bacterial isolate in vitro, and then, at the time of craniotomy, treated mice with various doses of 405-nm light (36, 45, and 54 J/cm²). The selected doses caused no behavioral derangements postoperatively or any observable brain pathology as determined postmortem by histologic evaluation and immunofluorescence staining for caspase 3 and glial fibrillary acidic protein, markers of apoptosis and necrosis. True-violet light devices may present an inexpensive refinement to current practices for maintaining open craniotomy sites or reducing bacterial loads in contaminated surgical sites.