Removal of endocrine disrupting compounds, pharmaceuticals, and personal care products in water using carbon nanotubes: A review

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Applications and implications of carbon nanotubes for the sequestration of organic and inorganic pollutants from wastewater

The rapid growth in the population, industrial developments, and climate change over the century have contributed to a significant rise in aquatic pollution leading to a scarcity of clean, reliable, and sustainable water sources and supply. Exposure through ingestion, inhalation, and dermal absorption of organic/inorganic compounds such as heavy metals, pharmaceuticals, dyes, and persistent organic pollutants (POPs) discharged from municipalities, hospitals, textile industries, food, and agricultural sectors has caused adverse health outcomes in aquatic and terrestrial organisms. Owing to the high surface area, photocatalytic activity, antimicrobial, antifouling, optical, electronic, and magnetic properties, the application of nanotechnology offers unique opportunities in advanced wastewater management strategies over traditional approaches. Carbon nanomaterials and associated composites such as single-walled carbon nanotubes (SWCNT), multiwalled carbon nanotubes (MWCNT), and carbon nanotubes (CNT) buckypaper membranes have demonstrated efficiency in adsorption, photocatalytic activity, and filtration of contaminants and thus show immense potentiality in wastewater management. This review focuses on the application of CNTs in the sequestration of organic and inorganic contaminants from the aquatic environment. It also sheds light on the aquatic pollutant desorption processes, current safety regulations, and toxic responses associated with CNTs. Critical knowledge gaps involving CNT synthesis, surface modification processes, CNT-environment interactions, and risk assessments are further identified and discussed.

Theoretical insights and implications of pH-dependent drug delivery systems using silica and carbon nanotube

In this paper we have studied the density functional theory of four drugs ibuprofen, alendronate, Sulfasalazine and paracetamol with quartz, propylamine, trimethylamine functionalized quartz and carboxyl modified carbon nanotube. The attractive and repulsive interaction energies between drugs and quartz is obtained at various pH values. The attractive and repulsive energies are well correlated with experimental drug loading and releasing behavior by mesoporous silica nanoparticles. Further, a theoretical model is developed that accounts the electrostatic interaction between silica and drug and the model can predict the drug loading and releasing behavior by silica nanoparticles at various pH values. Sulfasalazine can be taken orally and loaded with trimethyl ammonium functionalized mesoporous silica nanoparticles, which keeps the drug in tact with the carrier in the acidic environment of the stomach and releases it into the neutral or basic medium of the small intestine. Alendronate may be loaded and released from propylamine functionalized mesoporous silica nanoparticles in the ranges of 1-5 and > 8, respectively. Ibuprofen is absorbed in an acidic environment and released in basic conditions for carboxyl modified carbon nanotube. The loading and releasing pH ranges for paracetamol in trimethylammonium functionalized mesoporous silica nanoparticles are 4-8 and >8, respectively. We also convert the pH-dependent variant of the diffusion-controlled Higuchi equation. We have changed the original Higuchi equation to produce the pH-dependent variation by incorporating the Nernst-Planck equation into Flick's first law. The updated equation could be used to forecast when medication particles with varying release times will emerge from a nanoparticles matrix.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Removal of organic micropollutants from water by adsorption on thermo-plasma expanded graphite encapsulated into calcium alginate

Nowadays, public concern is focused on the degradation of water quality. For this reason, the development of innovative technologies for water treatment in view of (micro)pollutant removal is important. Indeed, organic (micro)pollutants, such as pharmaceuticals, herbicides, pesticides and plasticizers at concentration levels of μg L-1 or even ng L-1 are hardly removed during conventional wastewater treatment. In view of this, thermo-plasma expanded graphite, a light-weight innovative material in the form of a powder, was encapsulated into calcium alginate to obtain a granular form useful as filtration and adsorption material for removal of different pollutants. The produced material was used to remove atrazine, bisphenol-A, 17-α-ethinylestradiol and carbamazepine (at concentration levels of 125, 250 and 500 µg L-1) by top-down filtration. The effect of flow rate, bed depth and adsorbent composition was evaluated based on breakthrough curves. The experimental data was analysed with the Adams-Bohart model in view of scale-up. Under optimal conditions, removal and adsorption capacity of respectively about 21%, 21%, 38%,42%, 43 µg g-1, 44 µg g-1, 37 µg g-1 and 87 µg g-1 were obtained for atrazine, bisphenol, 17-α ethinylestradiol and carbamazepine when using 0.12 g of thermo-plasma expanded graphite to treat 200 mL at 500 µg L-1 (for each compound) of solution obtaining at contact time of 20 min. The granular form of TPEG obtained (GTPEG) by entrapping in calcium alginate results to have a good adsorbent property for the removal of carbamazepine, atrazine, bisphenol A and 17-α ethinylestradiol from water at concentration levels between 250 and 500 μg L-1. Promising results confirm the adsorbent properties of TPEG and push-up us to investigate on its application and improve of its performance by evaluating different entrapping materials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00876-9.

Viable remediation techniques to cleansing wastewaters comprising endocrine-disrupting compounds

Endocrine-disrupting chemicals (EDCs) have recently gained prominence as emerging pollutants due to their significant negative impacts on diverse living forms in ecosystems, including humans, by altering their endocrine systems. EDCs are a prominent category of emerging contaminants in various aquatic settings. Given the growing population and limited access to freshwater resources, their expulsion from aquatic systems is also a severe issue. EDC removal from wastewater depends on the physicochemical properties of the specific EDCs found in each wastewater type and various aquatic environments. Due to these components' chemical, physical, and physicochemical diversity, various approaches based on physical, biological, electrochemical, and chemical procedures have been developed to eliminate them. The objective of this review is to provide the comprehensive overview by selecting recent approaches that showed significant impact on the best available methods for removing EDCs from various aquatic matrices. It is suggested that adsorption by carbon-based materials or bioresources is effective at higher EDC concentrations. Electrochemical mechanization works, but it requires expensive electrodes, continual energy, and chemicals. Due to the lack of chemicals and hazardous byproducts, adsorption and biodegradation are considered environmentally friendly. When combined with synthetic biology and an AI system, biodegradation can efficiently remove EDCs and replace conventional water treatment technologies in the near future. Hybrid in-house methods may reduce EDCs best, depending on the EDC and resources.

Removal of oxytetracycline from wastewater by biochar modified with biosynthesized iron oxide nanoparticles and carbon nanotubes: Modification performance and adsorption mechanism

The pollution problem of oxytetracycline (OTC) from wastewater becomes more serious, so an efficient, economical, and green adsorption material is urgently explored. In this study, the multilayer porous biochar (OBC) was prepared by coupling carbon nanotubes with iron oxide nanoparticles synthesized by Aquabacterium sp. XL4 to modify corncobs under medium temperature (600 °C) conditions. The adsorption capacity of OBC could reach 72.59 mg g-1 after preparation and operation parameters were optimized. In addition, various adsorption models suggested that OTC removal resulted from the combined effect of chemisorption, multilayer interaction, and disordered diffusion. Meanwhile, the OBC was fully characterized and exhibited a large specific surface area (237.51 m2 g-1), abundant functional groups, stable crystal structure, high graphitization, and mild magnetic properties (0.8 emu g-1). The OTC removal mechanisms mainly included electrostatic interactions, ligand exchange, π-π bonding reactions, hydrogen bonds, and complexation. pH and coexistence substance experiments revealed that the OBC possesses a wide pH adaptation range and excellent anti-interference ability. Finally, the safety and reusability of OBC were confirmed by repeated experiments. In summary, OBC as a biosynthetic material shows considerable potential for application in the field of purifying new pollution from wastewater.

Electrochemical detection of ornidazole in commercial milk and water samples using an electrode based on green synthesis of silver nanoparticles using cellulose separated from Phoenix dactylifera seed

The widespread use of antibiotics has contributed to the control of disease and the nutritional well-being of livestock. Antibiotics reach the environment via excretions (urine and feces) from human and domestic animals, through non proper disposal or handling of unused drugs. The present study describes a green method for the synthesis of silver nanoparticle (AgNPs) using cellulose extracted from Phoenix dactylifera seed powder via mechanical stirrer method for the electroanalytical determination of ornidazole (ODZ) in milk and water samples. The cellulose extract is used as the reducing and stabilizer agent for the synthesis of AgNPs. The obtained AgNPs were characterized by UV-Vis, SEM and EDX, presenting a spherical shape and an average size of 48.6 nm. The electrochemical sensor (AgNPs/CPE) was fabricated by dipping a carbon paste electrode (CPE) in the AgNPs colloidal solution. The sensor shows acceptable linearity with ODZ concentration in the linear range from 1.0 × 10^-5 to 1.0 × 10^-3 M with a limit of detection (LOD =3S/P) and quantification (LOQ =10S/P) of 7.58 × 10^-7 M and 2.08 × 10^-6 M respectively.

Insight into the adsorptive removal of ibuprofen using porous carbonaceous materials: A review

Over the last decade, the removal of pharmaceuticals from aquatic bodies has garnered substantial attention from the scientific community. Ibuprofen (IBP), a non-steroidal anti-inflammatory drug, is released into the environment in pharmaceutical waste as well as medical, hospital, and household effluents. Adsorption technology is a highly efficient approach to reduce the IBP in the aquatic environment, particularly at low IBP concentrations. Due to the exceptional surface properties of carbonaceous materials, they are considered ideal adsorbents for the IBP removal of, with high binding capacity. Given the importance of the topic, the adsorptive removal of IBP from effluent using various carbonaceous adsorbents, including activated carbon, biochar, graphene-based materials, and carbon nanostructures, has been compiled and critically reviewed. Furthermore, the adsorption behavior, binding mechanisms, the most effective parameters, thermodynamics, and regeneration methods as well as the cost analysis were comprehensively reviewed for modified and unmodified carbonaceous adsorbents. The compiled studies on the IBP adsorption shows that the IBP uptake of some carbon-based adsorbents is significantly than that of commercial activated carbons. In the future, much attention is needed for practical utilization and upscaling of the research findings to aid the management and sustainability of water resource.

Sonicating for the Uptake of Paracetamol from Solution by Activated Carbon from Oak: Kinetics, Thermodynamics, and Isotherms

This inquiry used ultrasonic waves to uptake paracetamol (PA) by using oak-based activated carbon (ACO). The surface of ACO was explored based on FT-IR, SEM, and XRD before and after the adsorption. The kinetic data for PA adsorption onto ACO corresponds to a pseudo-second-order kinetic model. Isothermal models of the Langmuir, Freundlich, D-R, and Temkin were used. The adsorption of PA onto ACO was found to be a monolayer with 96.03% uptake, which corresponds to Langmuir. The thermodynamic experiments revealed the endothermic nature of PA adsorption onto ACO. Under the investigated optimal conditions, the adsorption capacity of PA onto ACO was found to be 97.1 mg. L-1. ACO could be recycled after six regenerations. Ultimately, sonicating has adequate performance for the uptake of PA by ACO.

Facile construction of cost-effective zinc-aluminium polymeric framework for efficient removal of selective both drug and dye from an aqueous medium

A novel aluminium (Al) and its active alloys are extensively been used in nearly all areas owing to their cost-effectiveness. But when it is subjected to an aqueous medium, gets corroded through a chemical response. In this paper, a novel framework was fabricated by copolymer coating over on Al and loaded with zinc via electro polymerization and electrodeposition method ([EDA- OPDA]Al@Zn). The as-fabricated composite has emerged for the sorption of Methylene Blue (MB) aqueous dye and Paracetomal drug (PAR). The as-fabricated composite framework has been categorized via IR spectra, FE-SEM images, and EDX spectra. The sorption progression was optimized for numerous prompting features like pH, contact time and impact of dosage. Based on kinetics data, the growth in QE value by an enhancement in temperature for adsorption and the higher r values shows the adsorption progression is a pseudo-second-order model. The thermodynamic constraints specify that the field of adsorbate is impulsive and typical endothermic process. Instead, the corrosion resistance of a composite in the 3.5% of NaCl. Solution was explored via EIS spectra and potentio-dynamic polarization. Depending on the observed features, it indicates that the [EDA-OPDA]Al@Zn framework provided fantastic corrosion resistance. So it is obvious that the as-synthesized framework is of multitasking, that it could be successfully performed for the exclusion of MB aqueous dye and PAR drug from the aqueous medium and it also withstands effectively in this corrosive medium.

Functionalized magnetic nanostructured composites and hybrids for photocatalytic elimination of pharmaceuticals and personal care products

Due to rapid urbanization and globalization, an enormous use of pharmaceuticals and personal care products (PPCPs) has resulted their excessive release in water bodies leading to several environmental issues. This release into the environment takes place via household sewage, hospital effluents, manufacturing units and landfill sites etc. The pharmaceuticals and personal care products (PPCPs) are recently listed as emerging contaminants having many adverse effects towards aquatic life, human beings, and the whole ecosystem. The alarming threats of PPCPs demand efficient methods to cope up their hazardous impacts. The conventional wastewater remediations are not specifically designed for the removal of PPCPs and hence, they require advanced technologies and materials for their elimination to ensure water safety. Among various methods employed so far, photocatalysis is considered to be one of the most cost effective and eco-friendly method but it requires a suitable candidate as a photocatalyst. Thanks to the magnetic nanocomposites which have improved the limitations (poor stability, agglomeration, and difficult separation, etc.) of classically used nanomaterials. Magnetic nanocomposites contain at least one component having magnetic properties making their separation easy from the aqueous media after the photodegradation phenomenon. These can be further functionalized with other materials to obtain maximum advantage as photocatalyst. Few examples of such functionalized nanocomposites are inorganic material based magnetic nanocomposites, carbon based magnetic nanocomposites, biomaterial based magnetic nanocomposites, metal-organic framework based magnetic nanocomposites and polymer based magnetic nanocomposites etc. This review covers the global environmental issue of water pollution especially with respect to the PPCPs, their occurrence in aqueous environment and toxic effects on living beings. A comprehensive discussion of the recently reported functionalized magnetic nanocomposites for the photocatalytic removal of PPCPs from water is the main aim of this review. The synthetic/morphological approaches of various functionalized magnetic composites and their mechanism of action are also elaborated. The possible research challenges in the field of magnetic nanocomposites and future research directions are discussed to apply magnetic nanocomposites for wastewater treatment in near future.

Cosmetic wastewater treatment technologies: a review

Over the past three decades, environmental concerns about the water pollution have been raised on societal and industrial levels. The presence of pollutants stemming from cosmetic products has been documented in wastewater streams outflowing from industrial as well as wastewater treatment plants. To this end, a series of consistent measures should be taken to prevent emerging contaminants of water resources. This need has driven the development of technologies, in an attempt to mitigate their impact on the environment. This work offers a thorough review of existing knowledge on cosmetic wastewater treatment approaches, including, coagulation, dissolved air flotation, adsorption, activated sludge, biodegradation, constructed wetlands, and advanced oxidation processes. Various studies have already documented the appearance of cosmetics in samples retrieved from wastewater treatment plants (WWTPs), which have definitely promoted our comprehension of the path of cosmetics within the treatment cycle; however, there are still multiple blanks to our knowledge. All treatments have, without exception, their own limitations, not only cost-wise, but also in terms of being feasible, effective, practical, reliable, and environmentally friendly.

Solar-light-driven LaFe x Ni1- x O3 perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

LaFe _x Ni_{1- x} O₃ perovskite oxides were prepared by the sol-gel method under various conditions, including different pH values (pH 0 and pH 7) and different calcination temperatures (500-800 °C) as well as different Fe/Ni ratios (1/9, 3/7, 5/5, 7/3, 9/1). The samples were examined by XRD, DRS, BET, and SEM to reveal their crystallinity, light-absorption ability, specific surface area, and surface features, respectively. The photocatalytic Fenton reaction was conducted using various LaFe _x Ni_{1- x} O₃ perovskite oxides to decompose the methylene blue molecules. Accordingly, the synthesis condition of pH 0, calcination temperature at 700 °C, and Fe/Ni ratio = 7/3 could form LaFe_0.7Ni_0.3O₃ perovskite oxides as highly efficient photocatalysts. Moreover, various conditions during the photocatalytic degradation were verified, such as pH value, catalyst dosage, and the additional amount of H₂O₂. LaFe_0.7Ni_0.3O₃ perovskite oxides could operate efficiently under pH 3.5, catalyst dosage of 50 mg/150 mL, and H₂O₂ concentration of 133 ppm to decompose the MB dye in the 1st order kinetic rate constant of 0.0506 s^-1.

Adsorptive Removal of Naproxen from Water Using Polyhedral Oligomeric Silesquioxane (POSS) Covalent Organic Frameworks (COFs)

Covalent organic frameworks are porous crystalline compounds made up of organic material bonded together by strong reversible covalent bonds (these are novel types of materials which have the processability of extended or repeated structures with high performance, like those of thermosets and thermoplastics that produce high surface coverage). These have a long-term effect on an arrangement’s geometry and permeability. These compounds are entirely made up of light elements like H, B, C, N, O and Si. Pharmaceuticals and personal care products (PPCPs) have emerged as a new threatened species. A hazardous substance known as an “emerging toxin,” such as naproxen, is one that has been established or is generated in sufficient amounts in an environment, creating permanent damage to organisms. COF-S7, OAPS and 2-methylanthraquionone(2-MeAQ), and COF-S12, OAPS and terephthalaldehyde (TPA) were effectively synthesized by condensation (solvothermal) via a Schiff base reaction (R1R2C=NR′), with a molar ratio of 1:8 for OAPS to linker (L1 and L2), at a temperature of 125 °C and 100 °C for COF-S7 and COF-S12, respectively. The compounds obtained were assessed using several spectroscopy techniques, which revealed azomethine C=N bonds, aromatic carbon environments via solid 13C and 29Si NMR, the morphological structure and porosity, and the thermostability of these materials. The remedied effluent was investigated, and a substantial execution was noted in the removal ability of the naproxen over synthesized materials, such as 70% and 86% at a contact time of 210 min and 270 min, respectively, at a constant dose of 0.05 g and pH 7. The maximum adsorption abilities of the substances were found to be 35 mg/g and 42 mg/g. The pH result implies that there is stable exclusion with a rise in pH to 9. At pH 9, the drop significance was attained for COF-S7 with the exception of COF-S12, which was detected at pH 11, due to the negative Foster charge, consequent to the repulsion among the synthesized COFs and naproxen solution. From the isotherms acquired (Langmuir and Freundlich), the substances displayed a higher value (close to 1) of correlation coefficient (R2), which showed that the substances fit into the Freundlich isotherm (heterogenous process), and the value of heterogeneity process (n) achieved (less than 1) specifies that the adsorption is a chemical process. Analysis of the as-prepared composites revealed remarkable reusability in the elimination of naproxen by adsorption. Due to its convenience of synthesis, significant adsorption effectiveness, and remarkable reusability, the as-synthesized COFs are expected to be able to be used as potential adsorbents for eliminating AIDs from water.

A review on advances in removal of endocrine disrupting compounds from aquatic matrices: Future perspectives on utilization of agri-waste based adsorbents

In the recent past, a class of emerging contaminants particularly endocrine disrupting compounds (EDCs) in the aquatic environment have gained a lot of attention. This is due to their toxic behaviour, affecting endocrine activities in humans as well as among aquatic animals. Presently, there are no regulations and discharge limits for EDCs to preclude their negative impact. Furthermore, the conventional treatment processes fail to remove EDCs efficiently. This necessitates the need for more research aimed at development of advanced alternative treatment methods which are economical, efficient, and sustainable. This paper focusses on the occurrence, fate, toxicity, and various treatment processes for removal of EDCs. The treatment processes (physical, chemical, biological and hybrid) have been comprehensively studied highlighting their advantages and disadvantages. Additionally, the use of agri-waste based adsorption technologies has been reviewed. The aim of this review article is to understand the prospect of application of agri-waste based adsorbents for efficient removal of EDCs. Interestingly, research findings have indicated that the use of these low-cost and abundantly available agri-waste based adsorbents can efficiently remove the EDCs. Furthermore, the challenges and future perspectives on the use of agri-waste based adsorbents have been discussed.

A comprehensive review on current technologies for removal of endocrine disrupting chemicals from wastewaters

In the recent years, endocrine disrupting compounds (EDCs) has received increasing attention due to their significant toxic effects on human beings and wildlife by affecting their endocrine systems. As an important group of emerging pollutant, EDCs have been detected in various aquatic environments, including surface waters, groundwater, wastewater, runoff, and landfill leachates. Their removal from water resources has also been an emerging concern considering growing population as well as reducing access to fresh water resources. EDC removal from wastewaters is highly dependent on physicochemical properties of the given EDCs present in each wastewater types as well as various aquatic environments. Due to chemical, physical and physicochemical diversities in these parameters, variety of technologies consisting of physical, biological, electrochemical, and chemical processes have been developed for their removal. This review highlights that the effectiveness of EDC removal is highly dependent of selecting the appropriate technology; which decision is made upon a full wastewater chemical characterization. This review aims to provide a comprehensive perspective about all the current technologies used for EDCs removal from various aquatic matrices along with rising challenges such as the antimicrobial resistance gene transfer during EDC treatment.

Removal of endocrine disrupters from the contaminated environment: public health concerns, treatment strategies and future perspectives - A review

Endocrine-disrupting compounds (EDCs) are emerging contaminants of concern (ECC) that disturb endocrine hormones and system functionality even at very low concentrations (i.e. μg/L or ng/L levels). Hence, EDCs are found in all components of the environment including surface and groundwater, wastewater, soil, outdoor and indoor air and in the contaminated foods from a variety of sources (run off from agricultural activities, sewage treatment plants, leakage from septic tanks etc.), and the effects are more severe as the majority of EDCs do not have standard regulations. The environmental mobility of EDCs is higher as conventional wastewater treatment does not degrade efficiently and the development of effective and sustainable removal technologies specifically designed for the removal of those emerging micropollutants is essential. Accordingly, EDCs cause various public health diseases such as reproductive abnormalities, obesity, various cancer types, cardiovascular risks, metabolic disorders, epigenetic alterations, autism, etc. This paper reviews the existing and emerging treatment technologies for the removal of phenolic based EDCs, such as natural estrogens (estrone (E1), 17β-estradiol (E2), estriol (E3)), synthetic estrogen 17α-ethinylestradiol (EE2) and phenolic xenoestrogens (4-nonyl phenols (4-NP) and bisphenol-A (BPA)) from the contaminated environment. These includes advanced oxidation processes (AOP), adsorption processes, membrane based filtration, bioremediation, phytoremediation and other integrated approaches. The sustainability of EDCs removal can be assured through the use of combined processes (i.e. low-cost - biological and adsorption methods with efficient and costly - AOPs) techniques through system integration to achieve better removal efficiency than using a single treatment technique. Besides, the public health concerns and future research perspectives of EDCs are also highlighted.

Treatment of Wastewater Containing Nonsteroidal Anti-Inflammatory Drugs Using Activated Carbon Material

This study presents an adsorbent material (activated carbon) used in the treatment of wastewater with the role of removing ibuprofen, acetaminophen, diclofenac and ketoprofen pollutants. The wastewater treatment efficiencies of the activated carbon were systematically investigated using adsorption kinetics. The parameters studied were: pH (4 and 6 values of pH), initial concentration of wastewater (1, 5, and 10 mg/L), contact time (10 min), adsorbent quantity (0.1, 0.5, and 1 g), and isotherm models (Langmuir and Freundlich). The highest wastewater treatment efficiency was obtained at the 6 pH value. The determination of four anti-inflammatory drugs, frequently monitored in wastewater, was performed by a simple and fast method using the HPLC-technique-type DAD (diode array detector). The method was linear when the concentration ranged between 0.5 and 20 m/L for all compounds. The equilibrium concentration was obtained after 8 min. The octanol/water coefficient influenced the removal efficiency of the four drugs by the adsorbent material (activated carbon). The dose of activated carbon (0.1 to 1 g) significantly influenced the efficiency of wastewater treatment, which increased considerably when the dose of the adsorbent material increased. Using 1 g of the adsorbent material for the treatment of wastewater containing 1 mg/L initial concentration of pollutant compounds, the efficiencies were 98% for acetaminophen, 92% for diclofenac, 88% for ketoprofen and 96% for ibuprofen.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Direct and indirect effects of SARS-CoV-2 on wastewater treatment

The novel SARS-CoV-2 is expanding internationally. While the current focus is on limiting its transmission from direct contact with infected patients and surfaces during the pandemic, the secondary transmission potential via sewage should not be underestimated, especially in low-income and developing countries with weak wastewater treatment technologies. Recent studies have indicated SARS-CoV-2 positivity also be detected in the feces of patients. Therefore, the risk of transmission and infection can be increased into sewage by the fecal-oral way, mainly in some parts of the globe with a high amount of open defecation. This review collected scattered data and recent studies about the direct and indirect effects of coronavirus in the water cycle. The direct impacts of COVID-19 on wastewater are related to the presence of the coronavirus and suitable viral removal methods in different phases of treatment in wastewater treatment plants. The indirect effects of COVID-19 on wastewater are related to the overuse of cleaning and disinfecting products to protect against viral infection and the overuse of certain drugs to protect against virus or novel mental problems and panic to COVID-19 and consequently their presence in wastewater. This unexpected situation leads to changes in the quality of wastewater and brings adverse and harmful effects for the human, aquatic organisms, and the environment. Therefore, applying effective wastewater treatment technologies with low toxic by-products in wastewater treatment plants will be helpful to prevent the increasing occurrence of these extra contaminants in the environment.

Sorption studies of sulfadimethoxine and tetracycline molecules on β-antimonene nanotube - A first-principles insight

We ascertained the structural firmness of β-antimonene nanotube and studied the adsorption behaviour of sulfadimethoxine (SM) and tetracycline (TC) molecules on the base substrate using density functional theory (DFT) with B86LYP-D3 level of theory. Significantly, β-antimonene nanotube displays a semiconducting character with an energy band-gap of 0.263 eV. The three dissimilar preferential adsorption sites namely, bride-, hollow-, tube-inner site of SM and TC molecules on β-antimonene nanotube were investigated using average band gap changes, Bader charge transfer along with adsorption energy. Further, the calculated adsorption energy for preferential adsorption sites is noticed to be in the scope of -0.813 eV to -3.752 eV signifying to physisorption and chemisorption form of interaction on β-antimonene nanotube. The inclusive outcome recommends that β-antimonene nanotube can be deployed as a chemi-resistive sensor to sense and remove SM and TC molecules from the contaminated aqueous medium.

Perovskite Zinc Titanate Photocatalysts Synthesized by the Sol–Gel Method and Their Application in the Photocatalytic Degradation of Emerging Contaminants

In this study, perovskite ZnTiO3 photocatalysts were fabricated by the sol–gel method. The photocatalytic capability was verified by the degradation of the emerging contaminant, the antibiotic amoxicillin (AMX). For the preparation, the parameters of the calcination temperature and the additional amount of polyvinylpyrrolidone (PVP) and ammonia are discussed, including the calcining temperature (500, 600, 700, 800 °C), the volume of ammonia (750, 1500, 3000 μL), and the weight of PVP (3 g and 5 g). The prepared perovskite ZnTiO3 was characterized by XRD, FESEM, BET, and UV-Vis. It is shown that the perovskite ZnTiO3 photocatalysts are structurally rod-like and ultraviolet light-responsive. Consequently, the synthesis conditions for fabricating the perovskite ZnTiO3 photocatalysts with the highest photocatalytic performance were a calcining temperature of 700 °C, an additional ammonia amount of 1500 μL, and added PVP of 5 g. Moreover, the photocatalytic degradation of perovskite ZnTiO3 photocatalysts on other pollutants, including the antibiotic tetracycline (TC), methyl orange (MO), and methylene blue (MB) dyes, was also examined. This provides the basis for the application of perovskite ZnTiO3 as a photocatalyst to decompose emerging contaminants and organic pollutants in wastewater treatment.

Toxicity and remediation of pharmaceuticals and pesticides using metal oxides and carbon nanomaterials

The worldwide development of agriculture and industry has resulted in contamination of water bodies by pharmaceuticals, pesticides and other xenobiotics. Even at trace levels of few micrograms per liter in waters, these contaminants induce public health and environmental issues, thus calling for efficient removal methods such as adsorption. Recent adsorption techniques for wastewater treatment involve metal oxide compounds, e.g. Fe2O3, ZnO, Al2O3 and ZnO-MgO, and carbon-based materials such as graphene oxide, activated carbon, carbon nanotubes, and carbon/graphene quantum dots. Here, the small size of metal oxides and the presence various functional groups has allowed higher adsorption efficiencies. Moreover, carbon-based adsorbents exhibit unique properties such as high surface area, high porosity, easy functionalization, low price, and high surface reactivity. Here we review the cytotoxic effects of pharmaceutical drugs and pesticides in terms of human risk and ecotoxicology. We also present remediation techniques involving adsorption on metal oxides and carbon-based materials.

Degradations of endocrine-disrupting chemicals and pharmaceutical compounds in wastewater with carbon-based nanomaterials: a critical review

Although water occupies 75% of the earth's surface, only 0.0067% of the total water is available for human activities. These statistics further decline with the population growth and consequent multiplication in the amount of annual waste produced. The demand for clean and safe drinking water has always been a prime concern in the global scenario. Among various types of waste materials, endocrine-disrupting chemicals (EDCs) and pharmaceutical effluents have become a constant threat to the aquatic ecosystem and possess challenges worldwide. Endocrine-disrupting chemicals (EDCs) are a mixed group of emerging concern chemicals with the ability to mimic the mechanisms of biosynthesis, transport, and metabolism of hormones. These chemicals pose various health threats such as early puberty, infertility, obesity, diabetes, reproductive disorders, cancerous tumors, and related disorders (immune cells, hormones' activity, and various organs). On the other hand, pharmaceutical compounds such as antibiotics also harm the natural environment, human health, and soil microbiology. Their low concentration, ranging from a few ng/L to μg/L, gives rise to a micro-pollution phenomenon, which makes it difficult to detect, analyze, and degrade in wastewater treatment plants. Activated carbons (ACs) and other adsorbents, including naturally occurring materials (wood, keratin) are considered as nanomaterials (NMs) reference for the separation of organic pollutants. It is generally acknowledged that mass-transfer phenomena control sorption kinetics at the liquid/solid interface, with retention controlled by the sorbent/sorbate properties. Therefore, the type of interaction (strong or weak van der Waals forces) and the hydrophilic/hydrophobic properties of the adsorbent are two crucial factors. Besides, EDCs and pharmaceutical compound sorption on such kinds of nanoporous solids depend on both the molecule size and charge density. The applications of nanomaterials on non-conservative methods, like advanced oxidation processes or AOPs (e.g., photocatalysis and Fenton reaction), are contemplated as more apt in comparison to conservative technology like reverse osmosis nanofiltration, and adsorption, etc. One of the reasons is that AOPs generate free radicals (hydroxyls), which are strong oxidants for the demineralization of organic compounds and the extreme case that hydroxyl radicals can attack any kinds of pollutants with the generation of only water and carbon dioxide as final products. AOPs may imply the use of NMs as either catalysts or photocatalysts, which improve the selective removal of the target pollutant. Therefore, various literature reviews have revealed that there is a timely need to upgrade the efficiency of the remediation approaches to protect the environment against EDCs and pharmaceuticals adequately. There is currently a lack of definitive risk assessment tools due to their complicated detection and associated insufficiency in the health risk database. Hence, our present review focuses on applying carbon-based nanomaterials to remove EDCs and pharmaceuticals from aqueous systems. The paper covers the effect of these pollutants and photocatalytic methods for treating these compounds in wastewater, along with their limitations and challenges, plausible solutions, and prospects of such techniques.

Selectivity and competition in the chemical oxidation processes for a binary pharmaceutical system in treated sewage effluent

In this study, the removal of ibuprofen and gemfibrozil by chlorination, ozonation and a combination of ozone/hydrogen peroxide (O₃/H₂O₂) advanced oxidation process (AOP) from treated sewage effluent (TSE) has been investigated. The removals were evaluated as single components and in binary systems at different oxidant dosages. Chlorination showed insignificant removal for both pharmaceuticals, while ozonation and O₃/H₂O₂ achieved significant removals for both ibuprofen and gemfibrozil. The highest removal efficiency of ibuprofen achieved with ozonation and O₃/H₂O₂ in TSE was 80% at 1.5 mg/L ozone dosage (0.27 mg O₃/mg DOC) within 5 min contact time and was not increased at extended times as the ozone residual approached zero in 5 min. For gemfibrozil, complete removals were achieved at ozone dosages of 1 and 1.5 mg/L by both ozonation and O₃/H₂O₂ within 30 s. The rate constants obtained from the second order kinetics study were almost similar for the binary and single component tests, however, the degradation of ibuprofen was around four times faster by O₃/H₂O₂ with a rate constant of 9 × 10⁴ M^-1 s^-1 in comparison to ozone alone. The results in the single component and binary systems were almost similar for gemfibrozil, but noticeably lower removals of ibuprofen were obtained in the binary system showing the higher selectivity and oxidation demand of gemfibrozil. Although O₃/H₂O₂ has a higher operation cost, but its capability for faster degradation makes it preferable over ozonation only, as more water can be treated on a daily basis or a smaller treatment plant can be used with lower capital cost, which practically becomes more cost efficient.

Interactions between microplastics, pharmaceuticals and personal care products: Implications for vector transport

Microplastics are well known for vector transport of hydrophobic organic contaminants, and there are growing concerns regarding their potential adverse effects on ecosystems and human health. However, recent studies focussing on hydrophilic compounds, such as pharmaceuticals and personal care products (PPCPs), have shown that the compounds ability to be adsorbed onto plastic surfaces. The extensive use of PPCPs has led to their ubiquitous presence in the environment resulting in their cooccurrence with microplastics. The partitioning between plastics and PPCPs and their fate through vector transport are determined by various physicochemical characteristics and environmental conditions of specific matrices. Although the sorption capacities of microplastics for different PPCP compounds have been investigated extensively, these findings have not yet been synthesized and analyzed critically. The specific objectives of this review were to synthesize and critically assess the various factors that affect the adsorption of hydrophilic compounds such as PPCPs on microplastic surfaces and their fate and transport in the environment. The review also focuses on environmental factors such as pH, salinity, and dissolved organics, and properties of polymers and PPCP compounds, and the relationships with sorption dynamics and mechanisms. Furthermore, the ecotoxicological effects of PPCP-sorbed microplastics on biota and human health are also discussed.

Synthesis of hierarchically structured T-ZnO-rGO-PEI composite and their catalytic removal of colour and colourless phenolic compounds

Phenolic compounds bisphenol A (BPA) and 4-nitrophenol (4-NP) are the prime water contaminants. As reported, these compounds are some of the highly hazardous ones to the human and living species. In this study, T-ZnO-rGO-PEI composite was synthesized employing hydrothermal method and the obtained composite samples were systematically characterized by FTIR, XPS, FE-SEM and HR-TEM studies. The FTIR, XPS analysis confirmed the successful surface modification of T-ZnO-rGO-PEI composite. The FE-SEM morphology confirmed the formation of ZnO (arm length about 2.5 μm) tetrapod structured in synthesized T-ZnO-rGO-PEI composite. The thickness of formed ZnO arm (0.44 μm) was increased after the polymer coating which confirmed the successful surface modification by PEI polymer. The HR-TEM images confirm the uniform coating of PEI polymer on T-ZnO-rGO surface. The catalytic activity and adsorption capacity of the synthesized T-ZnO-rGO-PEI composite was successfully explored using 4-nitrophenol and bisphenol-A as model pollutants .T-ZnO-rGO-PEI composite and found that 4-NP reduction reaction was completed within 10 min with the rate of 0.224 min^-1. The BPA adsorption over T-ZnO-rGO-PEI exhibited high adsorption rate of 0.0210 min^-1. In addition, the detailed 4-NP reduction and BPA adsorption mechanism was demonstrated. Hence the synthesized T-ZnO-rGO-PEI composite is a promising catalyst for the removal of micropollutants in aqueous medium.

Comparative studies on the separation of endocrine disrupting compounds from aquatic environment by emulsion liquid membrane and hollow fiber supported liquid membrane

Endocrine disrupting compounds have been found to limit the natural working of the endocrine system like synthesis, secretion, transference and binding. Endocrine disrupting compounds are released from humans, animals and from production industries to soil, surface water and sediments mostly through the sewage treatment system. Studies have revealed the impact of these compounds on the nervous system, lungs, liver, thyroid, prostate, metabolism, obesity and reproductive system. So removal of these compounds from sewage water/wastewater by appropriate processes is essential. Conventional techniques like coagulation, precipitation, flocculation, microfiltration and ultrafiltration are effective for the removal of these compounds but limitations like low molecular weight of these compounds and pore size of membrane restricts the complete removal. Liquid membrane is a promising technology which combines the steps like extraction and stripping in a single step thereby providing the instantaneous removal and recovery of solutes and also results in high selectivity and savings of chemicals. This paper mainly focuses on the use of liquid membrane techniques like emulsion liquid membrane and hollow fiber supported liquid membrane which are the promising techniques for the removal of endocrine disrupting compounds from aqueous streams. The working principle, mechanism and implementation of these two techniques in the removal of several endocrine disrupting compounds from aquatic streams are also discussed.

Gold nanoparticles decorated biguanidine modified mesoporous silica KIT-5 as recoverable heterogeneous catalyst for the reductive degradation of environmental contaminants

This current study involves the novel synthesis of Au nanoparticles (Au NPs) decorated biguanidine modified mesoporous silica KIT-5 following post-functionalization approach. The tiny Au NPs were being stabilized over the in situ prepared biguanidine ligand. The high surface area material was characterized using analytical techniques like Fourier Transformed infrared (FT-IR) spectroscopy, N2-adsorption-desorption isotherm, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDS), and X-ray Diffraction study (XRD). Our material was found to be an efficient catalyst in the reductive degradation of harmful water contaminating organic dyes like Methylene blue (MB), Methyl Orange (MO) and Rhodamin B (RhB) in presence of NaBH4 at room temperature. The whole procedure was followed up with the help of time dependant UV-Vis spectroscopy. All the reactions followed pseudo-unimolecular kinetics and corresponding rate constant were determined. The reduction rate becomes high in presence of higher load of catalysts.

Pharmaceuticals and personal care products in water and wastewater: a review of treatment processes and use of photocatalyst immobilized on functionalized carbon in AOP degradation

The presence of emerging contaminants such as pharmaceutical and personal care products in many aqueous matrices have been reported. One of such matrix is streams of wastewater, including wastewater treatment plants inflows and outflows and wastewater flow by-passing wastewater treatment plants. Their persistence arises from their resistant to breakdown, hence they may remain in the environment over long time, with a potential to cause adverse effects including endocrine disruption, gene toxicity, the imposition of sex organs, antibiotic resistance and many others in some aquatic organisms exposed to arrays of residues of pharmaceutical and personal care products. Among the treatment techniques, advanced oxidation processes have been reported to be a better technique through which these PPCPs can be degraded in the WWTPs. Heterogeneous photocatalysis using various photocatalyst immobilized on solid support such as activated carbon, graphene and carbon nanotubes in AOPs have been shown to be a viable and efficient method of PPCPs degradation. This is because, the performance of most WWTPs is limited since they were not designed to degrade toxic and recalcitrant PPCPs. This review highlight the occurrence, concentration of PPCPs in wastewater and the removal efficiency of heterogeneous photocatalysis of TiO2 immobilized on solid supports.

A Critical Review on Metal-Organic Frameworks and Their Composites as Advanced Materials for Adsorption and Photocatalytic Degradation of Emerging Organic Pollutants from Wastewater

Water-borne emerging pollutants are among the greatest concern of our modern society. Many of these pollutants are categorized as endocrine disruptors due to their environmental toxicities. They are harmful to humans, aquatic animals, and plants, to the larger extent, destroying the ecosystem. Thus, effective environmental remediations of these pollutants became necessary. Among the various remediation techniques, adsorption and photocatalytic degradation have been single out as the most promising. This review is devoted to the compilations and analysis of the role of metal-organic frameworks (MOFs) and their composites as potential materials for such applications. Emerging organic pollutants, like dyes, herbicides, pesticides, pharmaceutical products, phenols, polycyclic aromatic hydrocarbons, and perfluorinated alkyl substances, have been extensively studied. Important parameters that affect these processes, such as surface area, bandgap, percentage removal, equilibrium time, adsorption capacity, and recyclability, are documented. Finally, we paint the current scenario and challenges that need to be addressed for MOFs and their composites to be exploited for commercial applications.

Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model

The aim of this study was ultrasound assisted removal of Ceftriaxone sodium (CS) based on CCD model. Using sonochemical synthesized Bi₂WO₆ implanted on graphitic carbon nitride/Multiwall carbon nanotube (g-C₃N₄/MWCNT/Bi₂WO₆). For this purpose g-C₃N₄/MWCNT/Bi₂WO₆ was synthesized and characterized using diverse approaches including XRD, FE-SEM, XPS, EDS, HRTEM, FT-IR. Then, the contribution of conventional variables including pH, CS concentration, adsorbent dosage and ultrasound contact time were studied by central composite design (CCD) under response surface methodology (RSM). ANOVA was employed to the variable factors, and the most desirable operational conditions mass provided. Drug adsorption yield of 98.85% obtained under these defined conditions. Through conducting five experiments, the proper prediction of the optimum point were examined. The respective results showed that RSD% was lower than 5% while the t-test confirmed the high quality of fitting. Langmuir isotherm equation fits the experimental data best and the removal followed pseudo-second order kinetics. The estimation of the experimentally obtained maximum adsorption capacities was 19.57 mg.g^- of g-C₃N₄/MWCNT/Bi₂WO₆ for CS. Boundary layer diffusion explained the mechanism of removal via intraparticle diffusion.