A review on recent advances in the treatment of dye-polluted wastewater

Removal of food dyes using biological materials via adsorption: A review

It is alarming that synthetic food dyes (FD) are widely used in various industries and that these facilities discharge their wastewater into the environment without treating it. FDs mixed into industrial wastewater pose a threat to the environment and human health. Therefore, removing FDs from wastewater is very important. This review explores the burgeoning field of FD removal from wastewater through adsorption using biological materials (BMs). By synthesizing a wealth of research findings, this comprehensive review elucidates the diverse array of BMs employed, ranging from algae and fungi to agricultural residues and microbial biomass. Furthermore, this review investigates challenges in practical applications, such as process optimization and scalability, offering insights into bridging the gap between laboratory successes and real-world implementations. Harnessing the remarkable adsorptive potential of BMs, this review presents a roadmap toward transformative solutions for FD removal, promising cleaner and safer production practices in the food and beverage industry.

Fabrication of hollow fiber composite membranes via opposite transmission reaction method for dye/salt separation

The separation layer prepared by the conventional coating-crosslinking method is typically thick and prone to forming defective macropores, significantly affecting the water permeability and dye/salt separation performance of membranes. This work presented a novel method to prepare hollow fiber composite membranes for dye/salt separation based on the opposite transmission reaction of crosslinker. In this method, the macromolecule in situ reacted with a small-molecule crosslinker at the openings of membrane pore channels, forming a separation layer with discontinuous sheet-like and granular structure. Compared to the conventional forward coating-crosslinking method, the separation layer prepared by the opposite transmission reaction method exhibited an ultra-thin thickness of 29.1 nm. Consequently, the composite membrane exhibited a high water permeability of 72.7 L·m-2·h-1·bar-1, which was 2.3 times higher than that of conventional methods. Moreover, the prepared composite membrane presented a more uniformed pore structure, completely retaining the VBB (100%) with a low Na2SO4 rejection of 4.3%, demonstrating excellent dye/salt separation performance. Additionally, the prepared composite membrane exhibited superior anti-fouling properties compared to that prepared by the conventional method. Therefore, the opposite transmission reaction method proposed in this study held promising applications in the preparation of hollow fiber composite membranes for efficient dye/salt separation.

Recent advances in the biosynthesis of ZnO nanoparticles using floral waste extract for water treatment, agriculture and biomedical engineering

Flowers are often discarded after cultural and religious events, making it worthwhile to explore the utilization of this floral waste for material production. Floral extracts contain a diverse array of phytochemicals such as polyphenols, flavonoids, and reducing sugars, which play a significant role in the formation and influencing the properties of zinc oxide (ZnO) nanoparticles. In this review, we delve into the importance of floral extract, methodology, mechanism, and influencing factors in the production of ZnO nanoparticles. Additionally, the role of green ZnO nanoparticles as an adsorbent and photocatalyst for water treatment is discussed. These floral extract-mediated ZnO nanoparticles exhibit advantages in agricultural and biomedical applications, including promoting seed germination and demonstrating antibacterial, anticancer, and antifungal properties. Cost analysis reveals that while various expenses are associated with ZnO production, scaling up processes can help reduce these costs. This review underscores the potential of floral waste extract for the synthesis of green ZnO nanoparticles, thereby contributing to waste-to-wealth strategies and adhering to green chemistry principles.

Peroxydisulfate-based Non-radical Oxidation of Rhodamine B by Fe-Mn Doped Granular Activated Carbon: Kinetics and Mechanism Study

While numerous persulfate-based advanced oxidation processes (AOPs) have been studied based on fancy catalysts, the practical combination of Fe or Mn modified granular activated carbon (GAC) has seldom been investigated. The present study focused on a green and readily synthesized Fe-Mn bimetallic oxide doped GAC (Fe-Mn@GAC), to uncover its catalytic kinetics and mechanism when used in the peroxydisulfate (PDS)-based oxidation process for degrading Rhodamine B (RhB), a representative xenobiotic dye. The synthesized Fe-Mn@GAC was characterized by SEM-EDS, XRD, ICP-OES and XPS analyses to confirm its physicochemical properties. The catalytic kinetics of Fe-Mn@GAC+PDS system were evaluated under varying conditions, including PDS and catalyst dosages, solution pH, and the presence of anions. It was found Fe-Mn@GAC exhibited robust catalytic performance, being insensitive to a wide pH range from 3 to 11, and the presence of anions such as Cl-, SO4 2-, NO3 - and CO3 2-. The catalytic mechanism was investigated by EPR and quenching experiments. The results indicated the catalytic system processed a non-radical oxidation pathway, dominated by direct electron transfer between RhB and Fe-Mn@GAC, with singlet oxygen (1O2) playing a secondary role. The catalytic system also managed to maintain a RhB removal above 81 % in successive 10 cycles, and recover to 89.5 % after simple DI water rinse, showing great reusability. The catalytic system was further challenged by real dye-containing wastewater, achieving a decolorization rate of 84.5 %. This work not only provides fresh insight into the kinetics and mechanism of the Fe-Mn@GAC+PDS catalytic system, but also demonstrates its potential in the practical application in real dye-containing wastewater treatment.

Utilizing Chamaerops humilis in removing methylene blue dye from water: an effective approach

Removing dyes, particularly methylene blue, from wastewater is crucial due to their detrimental effects on environmental and human health. Adsorption, recognized as a simple and efficient technique, is frequently employed to eliminate various dyes from water. Although activated carbon is a favored adsorbent for wastewater treatment, its high cost often restricts its use. As a result, there is increasing interest in utilizing inexpensive, natural materials, and waste products as alternative adsorbents. Sawdust from the European fan palm tree, specifically Chamaerops humilis, a widely available and cost-effective by-product, has demonstrated effective dye removal from wastewater. This study explored the impact of various factors such as time, agitation, adsorbent quantity, dye concentration, pH, and temperature on the adsorption of methylene blue using Chamaerops humilis sawdust. Optimal dye adsorption conditions were identified at a temperature of 25 °C, a pH of 8, an adsorbent dosage of 100 mg, a contact time of 120 min, and a dye concentration of 20 mg L-1, achieving a removal efficiency of 93.5%. Moreover, the Langmuir isotherm model described the adsorption dynamics more accurately, suggesting a maximum sorption capacity of 22.7 mg g-1 for the sawdust. Additionally, adsorption kinetics aligned better with the pseudo-second-order model than the pseudo-first-order model, underscoring the efficacy of this method in treating dye-polluted water.

High-efficient removal of methylene blue by zirconium-based organic frameworks modified with 1,3,5-benzenetricarboxylic acid: Characterization, performances, and mechanisms

The vast discharge of methylene blue (MB) dye in industrial effluent, risks the ecological environment, thus making its removal unavoidable. Recently, metal organic frameworks (MOFs) due to their larger pore volume, surface area and easy synthesis have proved to be exceptionally promising materials for contaminant treatment. Based on 1,3,5-benzenetricarboxylic acid (BTC) as a modifier, a new composite material consisting of BTC and Zr-based MOF (UIO-66-BTC) was fabricated for the effective removal of MB from the effluent. Its synthesis and efficient application has been confirmed by characterization analysis. The influencing factors, adsorption isotherms, and adsorption kinetics of MB adsorption by adsorbent were studied. It was demonstrated that the removal rate of MB adsorption by UIO-66-BTC reached 98.45% and the adsorption amount reached 393.80 mg g-1 at temperature (298 K), pH 7, adsorbent dosage (0.5 g L-1), MB initial concentration (200 mg L-1), and contact time of 720 min, respectively. The maximum adsorption of MB by UIO-66-BTC was 20.827 times higher than that of UIO-66 (18.908 mg g-1). The experimental data fits with the pseudo-second-order kinetic model and Langmuir isotherm, implying that the adsorption process is a monolayer chemisorption process. The thermodynamic and regeneration experiments showed that the spontaneous process enhanced the adsorption of MB at lower temperatures and the adsorption efficiency of MB remained above 68% after five successive cycles. The mechanism of MB adsorption on adsorbents is mainly based on electrostatic interactions, pore filling, hydrogen bonding and π-π interactions. It is concluded that this new adsorbent can be effectively used to treat MB in effluents.

Carrageenan/calcium alginate composite hydrogel filtration membranes for efficient cationic dye separation

The development of biopolymer-based filtration systems for water remediation applications is an extremely fascinating area of research. In this paper, we developed a biopolymer-based filtration system using sodium alginate (NaAlg) and carrageenan (Car) for the removal of the toxic cationic dye, methylene blue (MB). The membrane's properties were assessed using FTIR, TGA, UTM, FESEM, EDS, XRD, and water uptake, revealing commendable thermomechanical stability (5.79 MPa), good hydrophilicity, and compatibility. The experimental results further revealed that lambda Car/calcium alginate (λ-Car/CaAlg) exhibited superior dye rejection (100%) and flux (11.67 L m-2 h-1) compared to kappa Car/CaAlg (κ-Car/CaAlg) (99.22% and 11.19 L m-2 h-1) and plain alginate (CaAlg) (99.63% and 9.79 L m-2 h-1). The high MB rejection rate was attributed to the sieving mechanism and electrostatic interaction. A rejection rate of 100% was achieved at an initial MB concentration of 10 mg/L, pressure of 0.1 MPa, pH of 7, and temperature of 25°C. Furthermore, the hydrogel membranes demonstrated excellent recyclability over nine cycles, indicating their potential for water treatment applications.

Premise setting for sustainable developing adsorption in environmental remediation using graphitic carbon nitride@agar-derived porous carbon composite

In the adsorption process for wastewater treatment, the adsorbent plays an important role. A composite adsorptive material composed of graphitic carbon nitride and agar-derived porous carbon (CNPC) was fabricated from simple precursors (melamine, thiourea, and agar) and through a facile procedure with different melamine and thiourea ratios. Characterization of CNPC proved a successful formation of a porous structure consisting of mesopores and macropores, wherein CNPC holds distinctive electrochemical (lowered resistance and higher specific capacity) and photochemical properties (lowered bandgap to 2.33 eV) thanks to the combination of graphitic carbon nitride (CN) and agar-derived porous carbon (PC). Inheriting the immanent nature, CNPC was subjected to the adsorption of methylene blue (MB) dye in an aqueous solution. The highest adsorption capacity was 133 mg/g for CNPC-4 which was prepared using a melamine to thiourea ratio of 4:4 - equivalent to the removal rate of 53.2 % and following the pseudo-I-order reaction rate. The effect of pH points out that pH 7 and 9 were susceptible to maximum removal and pretreatment is not required while the optimal ratio of 7.5 mg of MB and 30 mg of material was also determined to yield the highest performance. Furthermore, the reusability of the material for three consecutive cycles was evaluated based on two methods pyrolysis at 200 °C and photocatalytic degradation by irradiation under visible light. In general, the photocatalytic regeneration pathway is more ample and efficient than pyrolysis in terms of energy efficiency (saving energy over 10 times) and adsorption capacity stability. As a whole, the construction of accessible regenerative and stable adsorbent could be a venturing step into the sustainable development spearhead for industries.

Comparison of treatment performance and microbial community evolution of typical dye wastewater by different combined processes

The degradation of typical dye wastewater is a focus of research in the printing and dyeing industry. In this study, a combined micro-electrolysis and microbial treatment method was established to treat refractory dye wastewater, and the pivotal factors in the microbial treatment were optimized. In the series and coupled modes, the removal rates of chroma reached 98.75% and 92.50%, and the removal rates of chemical oxygen demand (COD) reached 96.17% and 82.29%, respectively. The high-throughput sequencing results showed that the microbial communities in the microbial system varied at different treatment stages. From the culture stage to the domestication stage, the dominant phylum was Proteobacteria; however, the community abundance of microorganisms decreased. A combination of micro-electrolysis and biological methods can alter the characteristics of the microbial community, increase the number of dominant phyla, and increase the abundance of microorganisms. The degradation effect of the series mode and the overall strengthening effect of micro-electrolysis on the microorganisms were better than those of the coupled mode. In actual wastewater, the maximum removal rates of chroma, COD, total nitrogen (TN), ammonia nitrogen (NH3-N), and total phosphorus (TP) are 97.50%, 98.90%, 94.35%, 93.95%, and 91.17%, respectively. Three-dimensional fluorescence spectrum analysis showed that microbial processes could significantly degrade fluorescent components in wastewater, and methanogenic active enzymes in anaerobic processes could continue to react. The combined process can realize the efficient treatment of toxic dye wastewater by reducing the toxicity of wastewater and efficiently degrading organic matter, which has important guiding significance for the treatment of refractory dye wastewater.

Polypyrrole-decorated bentonite magnetic nanocomposite: A green approach for adsorption of anionic methyl orange and cationic crystal violet dyes from contaminated water

In the presented study, a novel polypyrrole-decorated bentonite magnetic nanocomposite (MBnPPy) was synthesized for efficient removal of both anionic methyl orange (MO) and cationic crystal violet (CV) dyes from contaminated water. The synthesis of this novel adsorbent involved a two-step process: the magnetization of bentonite followed by its modification through in-situ chemical polymerization. The adsorbent was characterized by SEM/EDX, TEM/SAED, BET, TGA/DTA-DTG, FTIR, VSM, and XRD studies. The investigation of the adsorption properties of MBnPPy was focused on optimizing various parameters, such as dye concentration, medium pH, dosage, contact time, and temperature. The optimal conditions were established as follows: dye concentration of Co (CV/MO) at 100 mg/L, MBnPPy dosage at 2.0 g/L, equilibrium time set at 105 min for MO and 120 min for CV, medium pH adjusted to 5.0 for MO dye and 8.0 for CV dye, and a constant temperature of 303.15 K. The different kinetic and isotherm models were applied to fit the experimental results, and it was observed that the Pseudo-2nd-order kinetics and Langmuir adsorption isotherm were the best-fitted models. The maximal monolayer adsorption capacities of the adsorbent were found to be 78.74 mg/g and 98.04 mg/g (at 303.15 K) for CV and MO, respectively. The adsorption process for both dyes was exothermic and spontaneous. Furthermore, a reasonably good regeneration ability of MBnPPy (>83.45%/82.65% for CV/MO) was noted for up to 5 adsorption-desorption cycles with little degradation. The advantages of facile synthesis, cost-effectiveness, non-toxicity, strong adsorption capabilities for both anionic and cationic dyes, and easy separability with an external magnetic field make MBnPPy novel.

Enhanced dye sequestration with natural polysaccharides-based hydrogels: A review

Due to the expansion of industrial activities, the concentration of dyes in water has been increasing. The dire need to remove these pollutants from water has been heavily discussed. This study focuses on the reproducible and sustainable solution for wastewater treatment and dye annihilation challenges. Adsorption has been rated the most practical way of the several decolorization procedures due to its minimal initial investment, convenient utility, and high-performance caliber. Hydrogels, which are three-dimensional polymer networks, are notable because of their potential to regenerate, biodegrade, absorb bulky amounts of water, respond to stimuli, and have unique morphologies. Natural polysaccharide hydrogels are chosen over synthetic ones because they are robust, bioresorbable, non-toxic, and cheaply accessible. This study has covered six biopolymers, including chitosan, cellulose, pectin, sodium alginate, guar gum, and starch, consisting of their chemical architecture, origins, characteristics, and uses. The next part describes these polysaccharide-based hydrogels, including their manufacturing techniques, chemical alterations, and adsorption effectiveness. It is deeply evaluated how size and shape affect the adsorption rate, which has not been addressed in any prior research. To assist the readers in identifying areas for further research in this subject, limitations of these hydrogels and future views are provided in the conclusion.

A self-assembling hydrogel nanocomposite based on xanthan gum modified with SiO2 NPs and HPAM for improved adsorption of crystal violet cationic dye from aqueous solution

This paper presents the rational design and novel synthesis of multifunctional nanocomposite hydrogel derived from xanthan gum (XG) modified with silica nanoparticles and partially hydrolyzed polyacrylamide (HPAM) via H-bonding interactions (self-assembly) through the "green" gelation process in water. Different techniques have been employed to characterize HPAM/SiO2@XG, including FT-IR, FE-SEM, XRD, TEM, BET, and TG/DTG as well as swelling kinetics. Crystal violet (CV)'s adsorption performance was investigated using batch experiments by varying various variables involving adsorbent composition, pH, adsorbent quantity, contact time, CV concentration, ionic strength, and temperature. A well-fitting Langmuir isotherm was found for the adsorption data at 30 °C and pH 7.0, yielding 342.19 mg CV/g as the equilibrium state's maximum adsorption (qm). CV adsorption data agreed better with the pseudo-second-order model than other kinetic models. Furthermore, the HPAM/SiO2@XG nanocomposite hydrogel showed a significant increase in adsorption capacity over the SiO2@XG hydrogel precursor. According to thermodynamic analysis, CV adsorbs to HPAM/XG@SiO2 spontaneously and exothermically. Our results showed that the nanocomposite hydrogel's functional groups interact with CV predominantly through electrostatic interactions, coupled with H-bonding. Nanocomposite hydrogel has been regenerated using a five-cycle adsorption-desorption process, and the efficiency of CV removal has remained a satisfactory level of removal efficiency (94.5 % to 71.5 %).

Recent advances in the application of magnetic materials for the management of perfluoroalkyl substances in aqueous phases

Perfluoroalkyl substances (PFASs) are a class of artificially synthesised organic compounds extensively used in both industrial and consumer products owing to their unique characteristics. However, their persistence in the environment and potential risk to health have raised serious global concerns. Therefore, developing effective techniques to identify, eliminate, and degrade these pollutants in water are crucial. Owing to their high surface area, magnetic responsiveness, redox sensitivity, and ease of separation, magnetic materials have been considered for the treatment of PFASs from water in recent years. This review provides a comprehensive overview of the recent use of magnetic materials for the detection, removal, and degradation of PFASs in aqueous solutions. First, the use of magnetic materials for sensitive and precise detection of PFASs is addressed. Second, the adsorption of PFASs using magnetic materials is discussed. Several magnetic materials, including iron oxides, ferrites, and magnetic carbon composites, have been explored as efficient adsorbents for PFASs removal from water. Surface modification, functionalization, and composite fabrication have been employed to improve the adsorption effectiveness and selectivity of magnetic materials for PFASs. The final section of this review focuses on the advanced oxidation for PFASs using magnetic materials. This review suggests that magnetic materials have demonstrated considerable potential for use in various environmental remediation applications, as well as in the treatment of PFASs-contaminated water.

Fabrication of maleic anhydride-acrylamide copolymer based sodium alginate hydrogel for elimination of metals ions and dyes contaminants from polluted water

The study explores the synergy of biobased polymers and hydrogels for water purification. Polymer nanomaterial's, synthesized by combining acrylamide copolymer with maleic anhydride, were integrated into sodium alginate biopolymer using an eco-friendly approach. Crosslinking agents, calcium chloride and glutaraladehyde, facilitated seamless integration, ensuring non-toxicity, high adsorption performance, and controlled capacity. This innovative combination presents a promising solution for clean and healthy water supplies, addressing the critical need for sustainable environmental practices in water purification. In addition, the polymer sodium alginate hydrogel (MAH@AA-P/SA/H) underwent characterization via the use of several analytical procedures, such as FTIR, XPS, SEM, EDX and XRD. Adsorption studies were conducted on metals and dyes in water, and pollutant removal methods were explored. We investigated several variables (such as pH, starting concentration, duration, and absorbent quantity) affect a material's capacity to be adsorbed. Moreover, the maximum adsorption towards Cu2+ is 754 mg/g while for Cr6+ metal ions are 738 mg/g, while the adsorption towards Congo Red and Methylene Blue dye are 685 mg/g and 653 mg/g correspondingly, within 240 min. Adsorption results were further analyzed using kinetic and isothermal models, which showed that MAH@AA-P/SA/H adsorption is governed by a chemisorption process. Hence, the polymer prepared from sodium alginate hydrogel (MAH@AA-P/SA/H) has remarkable properties as a versatile material for the significantly elimination of harmful contaminants from dirty water.

pH-dependent and whole-cell catalytic decolorization of dyes using recombinant dye-decolorizing peroxidase from Rhodococcus jostii

Dyes in wastewater have adverse effects on the environment and human health. Dye-decolorizing peroxidase (DyP) is a promising biocatalyst to dyes degradation, but the decolorization rates varied greatly which influencing factors and mechanisms remain to be fully disclosed. To explore an effective decolorizing approach, we have studied a DyP from Rhodococcus jostii (RhDyPB) which was overexpressed in Escherichia coli to decolorize four kinds of dyes, Reactive blue 19, Eosin Y, Indigo carmine, and Malachite green. We found the decolorization rates of the dyes by purified RhDyPB were all pH-dependent and the highest one was 94.4% of Malachite green at pH 6.0. ESI-MS analysis of intermediates in the decolorization process of Reactive blue 19 proved the degradation was due to peroxidase catalysis. Molecular docking predicated the interaction of RhDyPB with dyes, and a radical transfer reaction. In addition, we performed decolorization of dyes with whole E. coli cell with and without expressing RhDyPB. It was found that decolorization of dyes by E. coli cell was due to both cell absorption and degradation, and RhDyPB expression improved the degradation rates towards Reactive blue 19, Indigo carmine and Malachite green. The effective decolorization of Malachite green and the successful application of whole DyP-overexpressed cells in dye decolorization is conducive to the bioremediation of dye-containing wastewaters by DyPs.

Plasmonic photocatalytic nanocomposite of in-situ synthesized MnO2 nanoparticles on cellulosic fabric with structural color

The textile industry produces 20 % of the industrial water pollution containing toxic substances mostly dyes. Reducing material consumption and developing more efficient and scalable textile waste-water treatment methods such as photocatalytic degradation is essential. In this work, manganese dioxide nanoparticles (MnO2 NPs) were synthesized on the cotton fabric via a facile in-situ process. The preparation process was optimized for the highest photocatalytic activity under sunlight and color change originating from the plasmonic structural color of the nanoparticles. This promotes the photocatalytic activity by delocalization of the hot electrons while demonstrating the best washing and light fastness by using the least chemicals, and energy in a short time. In this way, the fabric was colored without any dye and possessed robust photocatalytic activity. Further, no dye-containing waste-water is made, and also accomplished to degrade dyes in a few hours under sunlight which is substantial for sustainable development. The treated fabrics indicated favorable mechanical properties, enhanced thermal stability, and perfect biocompatibility.

Contribution of 1O2 in the efficient degradation of organic pollutants with Cu0/Cu2O/CuO@N-C activated peroxymonosulfate: A Case study with tetracycline

Peroxymonosulfate-mediated advanced oxidation processes (PMS-AOPs) degrading organic pollutants (Tetracycline (TC) as an example) in water with singlet oxygen (1O2) as the main reactive oxygen has received more and more attention. However, the generation mechanism of 1O2 is still unclear. Consequently, this study investigates the 1O2 formation mechanism during the activated PMS process using a nitrogen-copper-loaded carbon-based material (Cu0/Cu2O/CuO@N-C), synthesized by thermally decomposing organobase-modified HKUST-1 via a one-pot method. It was discovered that incorporating an organobase (Benzylamine) into the metal organic framework (MOF) precursor directs the MOF's self-assembly process and supplements its nitrogen content. This modification modulates the Nx-Cu-Oy active site formation in the material, selectively producing 1O2. Additionally, 1O2 was identified as the dominant reactive oxygen species in the Cu0/Cu2O/CuO@N-C-PMS system, contributing to TC degradation with a rate of 70.82%. The TC degradation efficiency remained high in the pH range of 3-11 and sustained its efficacy after five consecutive uses. Finally, based on the intermediates of TC degradation, three possible degradation pathways were postulated, and a reduction in the ecotoxicity of the degradation products was predicted. This work presents a novel and general strategy for constructing nitrogen-copper-loaded carbon-based materials for use in PMS-AOPs.

Nanocomposite from tannery sludge-derived biochar and Zinc oxide nanoparticles for photocatalytic degradation of Bisphenol A toward dual environmental benefits

The growing concern over the presence of pollutants like Bisphenol A (BPA) in water sources has led to the growth of novel treatment technologies for its removal. This research work investigates the development of a novel biochar-metal oxide nanocomposite derived from tannery sludge and Zinc oxide (ZnO) nanoparticles for the photodegradation of BPA. The biochar was obtained by pyrolysis process, followed by impregnation of ZnO nanoparticles using a hydrothermal technique. The critical properties of as-prepared nanocomposite were evaluated by FT-IR, BET surface area, XRD, FE-SEM, HR-TEM, XPS, PL, EPR, and Raman Spectroscopy. In addition, the photocatalytic activity of nanocomposites was evaluated by measuring the degradation of BPA in visible light irradiation. The outcomes revealed that ZnO-loaded chemically activated biochar exhibited higher photocatalytic activity for the degradation of BPA than the pristine and non-chemically activated biochar. At pH 5, 0.2 g/L of photocatalyst dosage, 20 ppm of initial pollutant concentration, and 150 min of contact time, the maximum degradation efficiency of BPA was observed as 94.50 %. Also, nanocomposites showed good stability and reusability, with only a slight decrease in photocatalytic activity after multiple cycles of use. More importantly, the degradation mechanisms of BPA using as-prepared nanocomposites were analyzed in detail, indicating that the observed photocatalytic activity could be attributed to the synergistic effect between the biochar and ZnO, which provided a large surface area for the adsorption of BPA and promoted the generation of reactive oxygen species for its degradation. Overall, this study highlighted the potential of using nanocomposites from tannery sludge-derived biochar and ZnO nanoparticles for the degradation of BPA from polluted water sources using a photocatalytic process toward the dual environmental benefits.

Synthesis and characterization of Alg/Gel/n-HAP/MNPs porous nanocomposite adsorbent for efficient water conservancy and removal of methylene blue in aqueous environments: Kinetic modeling and artificial neural network predictions

In this study, a new porous nanocomposite adsorbent for water conservancy was synthesized using the freeze-drying technique to adsorb a cationic dye (Methylene Blue) in an aqueous environment. The nanocomposite adsorbent was synthesized using natural polymers, gelatin, and sodium alginate, and hydroxyapatite and magnetic iron oxide nanoparticles was incorporated into the polymer network to improve mechanical properties and increase the surface-to-volume ratio. To confirm the structure and morphology of the sample, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques were employed. In addition, the magnetic properties of the synthesis of MNPs and porous nanocomposite were determined using value stream mapping (VSM) and dynamic light scattering (DLS). The adsorption of Methylene Blue (MB) was studied as a function of effective physical and variable parameters, such as time, temperature, pH, and initial concentration. The synthesized porous nanocomposite adsorbent exhibited a high adsorption capacity of 473.2 mg g-1 and followed pseudo-second-order kinetics. Additionally, the maximum adsorption capacity was observed at an initial concentration of 534.9 mg g-1. The adsorbent was also sensitive to temperature changes and was well-described thermodynamically and isothermally by the Freundlich isotherm model. Two artificial neural networks (ANNs) were also developed to investigate the properties of the synthesized nanocomposites. In the first ANN, the properties of the nanocomposites, including pore size, porosity, compressive strength, and elastic modulus, were predicted based on the variations in the weight percentages of gelatin and hydroxyapatite. In the second ANN, the effects of changes in temperature and initial concentration on the adsorption of MB by the synthesized nanocomposite samples were predicted. The ANNs' predictions indicated that increasing the weight percentage of hydroxyapatite nanoparticles and gelatin enhances the physical, mechanical, and adsorption performance of the synthesized porous nanocomposites. The best results were achieved for the sample containing 40 wt % of gelatin and 30 wt % of hydroxyapatite nanoparticles. Furthermore, the ANN models demonstrated that increasing the temperature and initial concentration resulted in an increase in the amount of MB adsorbed.

Enhanced photo-Fenton-like performance of biotemplated manganese-doped cobalt silicate catalysts

Cobalt-based catalysts are one of the preferred materials for effective activation of hydrogen peroxide, and metal element doping and active site dispersion are effective methods to enhance their catalytic activity. In this work, manganese-doped cobalt silicate@diatomite composites with enhanced photo-Fenton-like oxidation performance were prepared and used for degradation of methyl orange (MO) dyes. Experiments showed that manganese doping increased the specific surface area of the samples and decreased the band gap energy of the materials. Moreover, the samples doped with manganese elements had better photo-Fenton-like properties. The degradation of methyl orange by Co0.25MnSi@DE/H2O2-UV reached more than 95%. In addition, density-functional theory (DFT) calculations showed that the Mn-doped samples were more prone to activate H2O2 than non-manganese-doped samples, and the synergistic effect from using a bimetallic catalyst increased the photo-Fenton oxidation activity in the system. ESR spectroscopy and bursting tests indicated that the possible degradation mechanism consisted of hydroxyl radicals and superoxide radicals generated by the synergistic effect of cobalt ions and manganese under UV radiation. This study thus presents a feasible idea for the preparation of cobalt-based photo-Fenton catalysts that also provides a basis for understanding the catalytic mechanism analysis of other types of bimetallic catalysts.

Ti3C2-MXene/NiO Nanocomposites-Decorated CsPbI3 Perovskite Active Materials under UV-Light Irradiation for the Enhancement of Crystal-Violet Dye Photodegradation

Ti3C2-MXene material, known for its strong electronic conductivity and optical properties, has emerged as a promising alternative to noble metals as a cocatalyst for the development of efficient photocatalysts used in environmental cleanup. In this study, we investigated the photodegradation of crystal-violet (CV) dye when exposed to UV light using a newly developed photocatalyst known as Ti3C2-MXene/NiO nanocomposite-decorated CsPbI3 perovskite, which was synthesized through a hydrothermal method. Our research investigation into the structural, morphological, and optical characteristics of the Ti3C2-MXene/NiO/CsPbI3 composite using techniques such as FTIR, XRD, TEM, SEM-EDS mapping, XPS, UV-Vis, and PL spectroscopy. The photocatalytic efficacy of the Ti3C2-MXene/NiO/CsPbI3 composite was assessed by evaluating its ability to degrade CV dye in an aqueous solution under UV-light irradiation. Remarkably, the Ti3C2-MXene/NiO/CsPbI3 composite displayed a significant improvement in both the degradation rate and stability of CV dye when compared to the Ti3C2-MXene/NiO nanocomposite and CsPbI3 perovskite materials. Furthermore, the UV-visible absorption spectrum of the Ti3C2-MXene/NiO/CsPbI3 composite demonstrated a reduced band gap of 2.41 eV, which is lower than that of Ti3C2-MXene/NiO (3.10 eV) and Ti3C2-MXene (1.60 eV). In practical terms, the Ti3C2-MXene/NiO/CsPbI3 composite achieved an impressive 92.8% degradation of CV dye within 90 min of UV light exposure. We also confirmed the significant role of photogenerated holes and radicals in the CV dye removal process through radical scavenger trapping experiments. Based on our findings, we proposed a plausible photocatalytic mechanism for the Ti3C2-MXene/NiO/CsPbI3 composite. This research may open up new avenues for the development of cost-effective and high-performance MXene-based perovskite photocatalysts, utilizing abundant and sustainable materials for environmental remediation.

Seaweed-based alginate/hydroxyapatite composite for the effective removal of bacteria, cyanobacteria, algae, and crystal violet from water

A novel cost-effective and multifunctional nanocomposite was developed based on sustainable macroalgae biomass. The brown seaweed Sargassum latifolium was utilized for alginate extraction and the calcareous red seaweed Tricleocarpa fragilis was utilized as CaCO3 source for nanohydroxyapatite synthesis. The developed Zn2+-crosslinked alginate/nanohydroxyapatite (ZA/nHA) beads were characterized by FT-IR, XRD, and TEM. The antimicrobial potential of ZA/nHA to disinfect synthetic Escherichia coli-contaminated water was evaluated at different bacterial load and composite concentrations. The developed ZA/nHA effectively inactivated bacteria at initial concentration ≤ 105 CFU mL-1 and 0.5-1% (w/v) of ZA/nHA within 300-360 min. The kinetics of bacterial disinfection exhibited better fitting to Weibull model than Log-liner model, which confirmed the disinfection process. Furthermore, treatment of the cyanobacterium (Chroococcus sp.) and the microalga (Chlorella sp.) with ZA/nHA showed promising antialgal properties as indicated by reductions in chlorophyll a. The treatment indicated 100% and 90% removal of Chroococcus sp. and Chlorella sp. within 2 and 4 days, respectively. The developed ZA/nHA also exhibited a promising application as a biosorbent for crystal violet (CV). The adsorption process was very fast (0.171 mg CV g-1 adsorbent was removed within 7 min at pH 6.0). The adsorption kinetics exhibited better fitting to the pseudo-second order and Elovich models than the pseudo-first order equation. Besides, Sips model better represented the isotherm data of CV adsorption. The thermodynamic analysis indicated exothermic adsorption, which became more favorable at low temperature and high CV concentration. The developed nanocomposite is eco-friendly and suitable for multiple environmental applications.

Exploration of PVC@SiO2 nanostructure for adsorption of methylene blue via using quartz crystal microbalance technology

Methylene blue (MB) dye is considered a well-known dye in many industries and the low concentration of MB is considered very polluted for all environment if it discharged without any treatment. For that reason, many researchers used advanced technologies for removing MB such as the electrochemical methods that considered very simple and give rapid response. Considering these aspects, a novel quartz crystal microbalance nanosensors based on different concentrations of PVC@SiO2 were designed for real-time adsorption of MB dye in the aqueous streams at different pHs and different temperatures. The characterization results of PVC@SiO2 showed that the PVC@SiO2 have synthesized in spherical shape. The performance of the designed QCM-Based PVC@SiO2 nanosensors were examined by the QCM technique. The sensitivity of designed nanosensors was evaluated at constant concentration of MB (10 mg/L) at different pHs (2, 7 and 11) and temperatures (20 °C, 25 °C, and 30 °C). From the experimental, the best concentration of PVC@SiO2 was 3% for adsorbed 9.99 mg of cationic methylene blue at pH 11 and temperature 20 °C in only 5.6 min.

The degradation of bisphenol-A organic pollutant using the dispersal of TiO2 nanorods onto the partial reduction of graphene oxide nanosheets

The notion of innovative combinations of semiconducting metal oxides for photocatalytic destruction is a key factor in the removal of environmental contaminants. However, for the first time, the combination was made possible for the aforementioned reason by embedding one-dimensional titanium dioxide (TiO2) semiconductor nanorods on two-dimensional rGO (reduced graphene oxide) nanosheets utilizing hydrothermal and a modified Hummers' method. By applying several sophisticated procedures, the properties of these catalysts were found, and then the degradation of BPA (bisphenol-A) was examined with UV and visible light sources. Further, all the analyses were performed on pure TiO2 material. As a result of the synergistic interaction between TiO2 and rGO, the rGO-TiO2 catalyst produced a favorable photocatalytic outcome. The structural investigation of rGO-TiO2 has confirmed that the TiO2 was in anatase phase along with GO and rGO peaks, and the morphological characterization showed that the TiO2 nanorods were integrated randomly into the rGO nanosheets along with defective sites. Also, adding rGO to TiO2 causes charge separation, and π-π interactions to improve the visible light absorption range. In this study, the main model organic component in the photocatalytic degradation is bisphenol-A (BPA). During visible light irradiation, the OH radicals were finally produced by the redox reactions. Furthermore, the rGO surface adsorbs the phenol molecules due to graphene π-π interactions, thus narrowing the band gap and increasing the efficiency of BPA degradation.

Preparation and Photocatalytic Performance of Sodium Alginate/Polyacrylamide/Polypyrrole-TiO2 Nanocomposite Hydrogels

The application of photocatalysis technology in environmental pollution treatment has garnered increasing attention, and enhancing the photocatalytic efficiency and recyclability of photocatalysts represents a pivotal research focus for future endeavors. In this paper, polypyrrole titanium dioxide nanocomposite (PPy-TiO2) was prepared using in situ polymerization method and dispersed in sodium alginate/polyacrylamide (SA/PAM) hydrogel matrix to prepare SA/PAM/PPy-TiO2 nanocomposite hydrogels. The nanocomposite hydrogels were characterized by XPS, FT-IR, XRD, TGA, SEM, and TEM. The results showed that the composite materials were successfully prepared and PPy-TiO2 was uniformly dispersed in the hydrogel matrix. The incorporation of PPy in the SA/PAM/TiO2 composite hydrogel resulted in enhanced visible light absorption, reduced recombination efficiency of photoelectron-hole pairs in TiO2, and facilitated the photocatalytic degradation of methylene blue (MB) and methyl orange (MO) under sunlight irradiation. The photocatalytic efficiency of the composite hydrogel for MB was nearly 100%, whereas for MO, it reached 91.85% after exposure to sunlight for 120 min. In comparison with nano-TiO2 and PPy-TiO2, the SA/PAM/PPy-TiO2 nanocomposite hydrogel exhibited a higher degradation rate of MB and demonstrated ease in separation and recovery from the reaction solution. Furthermore, even after undergoing five cycles of recycling, there was no significant decrease observed in photodegradation efficiency.

Zinc nanoparticles encapsulated in porous biopolymer beads for reduction of water pollutants and antimicrobial activity

This work focuses on the preparation of composite beads from alginate crosslinked with copper at several loading percent and also loaded with ZnNPs. Th obtained samples were applied as catalysts for the reduction of the organic polluants 4-NP, MB, OG, MO, and CR in simple and binary systems. XRD results and TEM images confirmed the presence of ZnNPs in the polymer matrix. XRF and TGA analysis showed that the percentage of the cross-linking agent significantly influences the content of ZnNPs as well as the thermal stability of the resulting material. The catalytic activity of the composite beads showed that the Cu(4 %)-ALG(ZnNPs) sample was the best catalyst for all pollutants. In the simple system, the recorded rate constants for MB, MO, 4-NP, OG, and CR were 0.0133 s-1, 0.0076 s-1, 0.005 s-1, 0.0042 s-1, 0.0036 s-1, respectively. The catalyst was more selective towards the cationic MB dye for binary systems. For antibacterial and antifungal applications, the different materials containing ZnNPs and their counterparts containing Zn2+ were found to be active across all bacterial strains (Gram positive and Gram negative) as well as fungi, and the Zn2+-containing composites in particular performed better across all bacteria and fungi.

Effect of the Standardized ZnO/ZnO-GO Filter Element Substrate driven Advanced Oxidation Process on Textile Industry Effluent Stream: Detailed Analysis of Photocatalytic Degradation Kinetics

A simple process of synthesizing coated filter element substrates (FES) containing zinc oxide (ZnO) nanorods and ZnO graphene-oxide nanocomposite for a pilot-scale industrial dye-effluent treatment plant is proposed. This work reports a detailed analysis of the photocatalysis mechanism on real industrial effluent streams containing a mixture of dyes. The analysis is very relevant for conducting advanced oxidation process-assisted effluent remediation at a field-level treatment operation. Estimation of the dye concentration shows nearly complete (≥98%) degradation from an initial dye sample concentration. A detailed study for the analysis of the initial reactive dyes and their degradation products was performed for quantification and identification of the degradation products through various spectral techniques. A design of the remediation mechanism through degradation pathways is proposed for characterizing the organic compounds in the degraded dye products. A regeneration and reusability study was performed on the FES presenting the durability of the FES-designed synthesis process originally for 11 cycles and regenerated FES for six cycles for achieving a threshold of 60% degradation efficiency. The experimental results demonstrate the efficacy of FES through the designed immobilized approach for the complete remediation of textile dye effluents for a 4 h treatment plant process and the consistent operability of the FES for the combined dye wastewater treatment operations.

Synthesis of a pyridine-based covalent organic framework as an efficient adsorbent for rhodamine B removal

Covalent organic frameworks (COFs), featured with crystalline structures, permanent porosity, and designable organic skeletons, are good candidates for serving as adsorbents. Herein, a new pyridine-based two-dimensional COF (TAPP-DBTA-COF) was constructed via the condensation of 2,4,6-tris(4-aminophenyl)pyridine and 2,5-dibromobenzene-1,4-dicarbaldehyde. TAPP-DBTA-COF displayed high-performance for the removal of rhodamine B (Rh B) from water with high capacity, good adaptability and reusability. The maximum adsorption capacity for Rh B can reach up to 1254 mg g-1, and the kinetic constant was determined as k2 = 0.00244 g mg-1 min-1. Moreover, the corresponding amorphous polymer of TAPP-DBTA-COF, termed as TAPP-DBTA-COP, was synthesized from the same starting materials. The lower efficiency of TAPP-DBTA-COP in capture of Rh B revealed that the ordered pore structure, large specific surface area and rich adsorption sites play an important role in adsorption.

Ultrasonic-assisted sustainable extraction and dyeing of organic cotton fabric using natural dyes from Dillenia indica leaf

As a means of preventing environmental damage caused by synthetic dyes, eco-friendly textile dyeing with natural dyes is gaining popularity worldwide. This study focused on the extraction of dyes from the leaf of Dillenia indica (D. indica) tree using an ultrasonic extraction technique and applied on the organic cotton fabrics. The ultrasonic method was used for both extractions of D. indica dyes and dyeing of organic cotton fabrics. Here, the amount of D. indica powder used were 5% and 6.67% for producing light and dark shade, respectively. The investigation of the color fastness to washing, rubbing, and light for the dyed organic cotton fabrics indicated an excellent rating. The spectrophotometric analysis revealed the L* (lightness or darkness), a* (redness or greenness), b* (yellowness or blueness), C* (chroma), h* (hue), R% (reflectance), and K/S (color strength) values, which accurately represented the shade of the dyed organic cotton fabric. To understand the interaction between D. indica dye and organic cotton fabrics, different characterization including, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were performed. The characterization outcomes confirmed the successful deposition of D. indica dyes on the organic cotton fabrics. The other comparable testing results such as bursting strength, air permeability, and thermogravimetric analysis (TGA) of dyed and undyed organic cotton fabrics were in the acceptable range. One of the important findings of this research was no chemicals were utilized during the extraction and dyeing of organic cotton fabrics. This process can be referred to as completely chemical-free and advantageous for the environment because no chemicals were needed during extraction or dyeing. Therefore, the natural dye extracted from D. indica is extremely promising and could be a viable option for the sustainable dyeing of cotton fabrics in the textile dyeing industry.

Carbonized titanium dioxide with good adsorption properties for cationic dyes via simple heat treatment

With the development of modern industry, the discharge of dye wastewater is increasing year by year, and the damage caused by this wastewater to the ecosystem is often irreversible. Therefore, the research on the harmless treatment of dyes has attracted much attention in recent years. In this paper, commercial titanium dioxide (anatase nanometer titanium dioxide) was heat treated with anhydrous ethanol to synthesize titanium carbide (C/TiO2). Its maximum adsorption capacity for cationic dyes methylene blue (MB) and Rhodamine B is 27.3 and 124.6 mg g-1, respectively, which is much higher than that of pure TiO2. The adsorption kinetics and isotherm model of C/TiO2 were studied and characterized by Brunauer-Emmett-Teller, x-ray photoelectron spectroscopy, x-ray diffraction, Fourier transform infrared spectroscopy, and other methods. The results show that the carbon layer on the surface of C/TiO2 promotes the increase in surface hydroxyl groups, which is the main reason for the increase in MB adsorption. Compared with other adsorbents, C/TiO2 showed excellent reusability. The experimental results of adsorbent regeneration showed that the adsorption rate R% of MB was almost unchanged after three cycles. During the recovery of C/TiO2, the dyes adsorbed on its surface are removed, which solves the problem that the adsorbent cannot degrade dyes simply by adsorption. Additionally, C/TiO2 has a stable adsorption effect, is insensitive to the pH value, has a simple preparation process, and has relatively low raw material prices, making it suitable for large-scale operation. Therefore, it has good commercial prospects in the organic dye industry wastewater treatment.

Microbial biosorbent for remediation of dyes and heavy metals pollution: A green strategy for sustainable environment

Toxic wastes like heavy metals and dyes are released into the environment as a direct result of industrialization and technological progress. The biosorption of contaminants utilizes a variety of biomaterials. Biosorbents can adsorb toxic pollutants on their surface through various mechanisms like complexation, precipitation, etc. The quantity of sorption sites that are accessible on the surface of the biosorbent affects its effectiveness. Biosorption’s low cost, high efficiency, lack of nutrient requirements, and ability to regenerate the biosorbent are its main advantages over other treatment methods. Optimization of environmental conditions like temperature, pH, nutrient availability, and other factors is a prerequisite to achieving optimal biosorbent performance. Recent strategies include nanomaterials, genetic engineering, and biofilm-based remediation for various types of pollutants. The removal of hazardous dyes and heavy metals from wastewater using biosorbents is a strategy that is both efficient and sustainable. This review provides a perspective on the existing literature and brings it up-to-date by including the latest research and findings in the field.

Efficient and recyclable Nd3+-doped CoFe2O4 for boosted visible light-driven photocatalytic degradation of Rhodamine B dye

Rare earth metal doping spinel ferrites offer excellent electronic, magnetic, and photocatalytic properties, but they have not been well explored for environmental mitigation. Herein, we report the facile fabrication of novel CoNd _x Fe_2-x O₄ (x = 0-0.05) photocatalysts based on Nd³⁺ incorporated into CoFe₂O₄ for the degradation of Rhodamine B under visible light irradiation. The Nd³⁺ dopant considerably increased the specific surface area (35 m² g^-1) and enhanced the degradation performance (94.7%) of CoNd _x Fe_2-x O₄ catalysts. Nd³⁺-doped CoFe₂O₄ played a role in the formation of radicals, including ˙OH, h⁺, and ˙O₂ ^-. With high recyclability and performance, CoNd_0.05Fe_1.95O₄ nanoparticles can be efficient and reusable photocatalysts for degrading organic dyes, including Rhodamine B from wastewaters.

Effect of long-term exposure to dyeing wastewater treatment plant effluent on growth and gut microbiota of adult zebrafish (Danio rerio)

Strict standards have been put forward for the treatment and discharge of dyeing wastewater worldwide. However, there are still traces amount of pollutants, especially emerging pollutants in dyeing wastewater treatment plant (DWTP) effluent. Few studies have focused on the chronic biological toxicity effect and mechanism of DWTP effluent. In this study, 3-month chronic compound toxic effects were investigated by the exposure of DWTP effluent using adult zebrafish. Significantly higher mortality and fatness and significantly lower body weight and body length were found in the treatment group. In addition, long-term exposure to DWTP effluent also obviously reduced liver-body weight ratio of zebrafish, causing abnormal liver development of zebrafish. Moreover, DWTP effluent led to obvious changes in the gut microbiota and microbial diversity of zebrafish. At phylum level, significantly higher of Verrucomicrobia but lower Tenericutes, Actinobacteria, and Chloroflexi were found in the control group. At genus level, the treatment group had significantly higher abundance of Lactobacillus, but significantly lower abundance of Akkermansia, Prevotella, Bacteroides, and Sutterella. These results suggested that long-term exposure to DWTP effluent led to imbalance of gut microbiota in zebrafish. In general, this research indicated that DWTP effluent pollutants could result in negative health outcomes to aquatic organisms.

Synthesis of CaWO4 as a Photocatalyst for Degradation of Methylene Blue and Carmine under Ultraviolet Light Irradiation

Photocatalysis is considered a promising method for wastewater treatment; however, most synthesized photocatalysts have complex structures and are costly. Thus, in this study, a novel CaWO4 sample was synthesized by a co-precipitation method in one step. The characteristic results show that CaWO4 has good dispersibility, a large specific surface area, and good photoresponse under UV light. The synthesized CaWO4 can be used to degrade methylene blue (MB) and carmine (CR) under UV light without the addition of oxidants. The effects of a water matrix, including pH value, solid–liquid ratio, light intensity, and initial concentration of pollutants on photocatalytic degradation were studied. According to the optimization of these factors, the optimal photocatalytic degradation condition was found under the catalyst concentration of 1.0 g/L and ultraviolet light intensity of 80 W. The optimal pH is 8.2 for the MB system and 6.0 for the CR system. The optimal photocatalytic degradation of MB and CR at 100 mg/L can be achieved as 100%. According to the results of scavenger experiments, holes and hydroxyl radicals dominate the degradation of MB while hydroxyl radicals and superoxide anions are mainly responsible for the degradation of CR. Further analyses showed that photogenerated electrons generated on the surface of the CaWO4 can form electron–hole pairs, thereby producing hydroxyl radicals and superoxide anions to degrade dyes. In addition, the CaWO4 has a good cycling performance in the process of degrading MB (more than 80% after five cycles). It provides a new idea for the photocatalytic degradation of dyes using mineral-like materials.

Fabrication and Characterization of Functional Biobased Membranes from Postconsumer Cotton Fabrics and Palm Waste for the Removal of Dyes

Textile industries currently face vast challenges for the active removal of colored wastewater. Indeed, sustainable, recyclable, and green approaches are still lacking to achieve this aim. Thus, the present study explored the utilization of highly functional, green, recyclable, fully bio-based, and cost-effective composite membranes from post-consumer cotton fabrics and palm waste for wastewater treatment purposes. Highly functional cellulose nanofibers (CNF) were produced from waste cotton fabrics and filter paper using an acid hydrolysis technique. The yield of nanofibers extracted from waste cotton fabrics and filter paper was 76.74 and 54.50%, respectively. The physical, chemical, and structural properties of nanofibers were studied using various advanced analytical techniques. The properties of isolated nanofibers were almost similar and comparable to those of commercial nanofibers. The surface charge densities were -94.0, -80.7, and -90.6 mV for the nanofibers of palm waste, cotton fibers, and filter paper, respectively. After membrane fabrication using vacuum and hot-pressing techniques, the characteristics of the membrane were analyzed. The results showed that the average pore size of the palm-waste membrane was 1.185 nm, while it was 1.875 nm for membrane from waste cotton fibers and filter paper. Congo red and methylene blue dyes were used as model solutions to understand the behavior of available functional groups and the surface ζ-potential of the membrane frameworks' interaction. The membrane made from palm waste had the highest dye removal efficiency, and it was 23% for Congo red and 44% for methylene blue. This study provides insights into the challenges associated with the use of postconsumer textile and agricultural waste, which can be potentially used in high-performance liquid filtration devices for a more sustainable society.

Synergistic Multisystem Photocatalytic Degradation of Anionic and Cationic Dyes Using Graphitic Phase Carbon Nitride

Graphitic phase carbon nitride (g-C3N4) is a promising photocatalytic environmental material. For this study, the graphitic phase carbon nitride was prepared using a thermal polymerization method. The characteristic peaks, structures, and morphologies were determined using Fourier-transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), and scanning electron microscopy (SEM), respectively. Under the synergetic visible light catalysis of H2O2 and Na2S2O8, the degradation effects of g-C3N4 on the anionic dye methyl orange (MO) and the cationic dye rhodamine b (Rhb) were investigated. The effects of adding different volumes of H2O2 and Na2S2O8 were likewise tested. The results showed that the above two synergistic systems increased the degradation rates of MO and Rhb by 2.5 and 3.5 times, respectively, compared with pure g-C3N4, and that the degradation rates of both MO and Rhb reached 100% within 120 min and 90 min, respectively, in accordance with the primary reaction kinetics. When H2O2 and Na2S2O8 were added dropwise at 10 mL each, the degradation rates of MO and Rhb were 82.22% and 99.81%, respectively, after 30 min of open light. The results of experiments upon both zeta potential and radical quenching showed that ·OH and ·O2− were the main active radicals for dye degradation in our synergistic system. In addition, stability tests showed that the photocatalysts in the synergistic system still had good reusability. Therefore, the use of a synergistic system can effectively reduce the photogenerated electron-hole pair complexation rate, representing a significant improvement in both photocatalytic degradation and for stability levels.

Efficient activation of peroxymonosulfate via Cu2+/Cu+ cycle enhanced by hydroxylamine for the degradation of Rhodamine B

The application of Cu²⁺/peroxymonosulfate (PMS) process for the elimination of refractory pollutants in industrial wastewater is limited by the slow transformation from Cu²⁺ to Cu⁺. In this research, hydroxylamine (HA) was employed to improve the degradation capacity of the Cu²⁺/PMS process. Rhodamine B (RhB) was selected as the target compound to indicate the performance of HA/Cu²⁺/PMS process. Compared with the Cu²⁺/PMS process, the reduction of Cu²⁺ to Cu⁺ was effectively promoted by HA in the HA/Cu²⁺/PMS process, which increased the decomposition rate of PMS by 29.2%, correspondingly, promoted the removal rate of RhB by 77.6%. The degradation of RhB followed pseudo-second-order kinetics in the proposed process. The active species analysis subsequently indicated hydroxyl radicals (·OH) and sulfate radicals (SO₄·^-) played important roles for degrading RhB with ·OH as the dominant active radical. The effects including initial pH, RhB concentration, PMS concentration, and Cu²⁺ concentration on the degradation of RhB were further investigated and discussed in detail. Additionally, the HA/Cu²⁺/PMS process exhibited effective RhB removal in simulated wastewater. From the perspective of waste utilization (Cu²⁺) and the remediation of organic contamination, the work would provide a valuable and promising process.

Preparation and Characterization of a Renewable Starch-g-(MA-DETA) Copolymer and Its Adjustment for Dye Removal Applications

Maleic anhydride-diethylenetriamine grafted on starch (st-g-(MA-DETA)) was synthesized through graft copolymerization, and the different parameters (copolymerization temperature, reaction time, concentration of initiator and monomer concentration) affecting starch graft percentage were studied to achieve the maximum grafting percentage. The maximum grafting percentage was found to be 29.17%. The starch and grafted starch copolymer were characterized using XRD, FTIR, SEM, EDS, NMR, and TGA analytical techniques to describe copolymerization. The crystallinity of starch and grafted starch was studied by XRD, confirming that grafted starch has a semicrystalline nature and indicating that the grafting reaction took place typically in the amorphous region of starch. NMR and IR spectroscopic techniques confirmed the successful synthesis of the st-g-(MA-DETA) copolymer. A TGA study revealed that grafting affects the thermal stability of starch. An SEM analysis showed the microparticles are distributed unevenly. Modified starch with the highest grafting ratio was then applied to celestine dye removal from water using different parameters. The experimental results indicated that St-g-(MA-DETA) has excellent dye removal properties in comparison to native starch.

Cobalt-doped V2O5 hexagonal nanosheets for superior photocatalytic toxic pollutants degradation, Cr (VI) reduction, and photoelectrochemical water oxidation performance

The worldwide energy calamity and ecological disturbances demand materials that can remove harmful contaminants from the polluted water. Recently, semiconductor-based catalytic dye removal has created much consideration due to its high efficacy and eco-friendly contaminated water treatment processes. Vanadium oxide (V₂O₅) has attracted superior attention as a catalyst due to its robust oxidation power, chemical inertness, and stability against photodegradation. In this study, pristine and cobalt (Co)-doped V₂O₅ samples were synthesized by solvothermal method and examined for their photo-degradation activity and photoelectrochemical (PEC) water oxidation properties. The orthorhombic crystal phase was confirmed by X-ray diffraction (XRD), hexagonal-shaped morphology was observed by scanning electron microscope (SEM) and reduced optical band gap (2.01 eV) was noticed for doped V₂O₅ catalyst compared to the pristine (2.20 eV) catalyst. The doped V₂O₅ catalyst exhibited enhanced photodegradation of crystal violet CV (92.7%) and Cr (VI) reduction (90.5%) after 100 min of light irradiation. The doped photocatalyst exhibited approximately 2.1 and 1.9-fold enhancement of photodegradation of CV and Cr(VI) reduction, respectively. The doped electrode showed improved photocurrent density (0.54 mA/cm^-2) compared to pristine electrode (0.12 mA/cm^-2). Moreover, the doped electrode showed reduced charge-transfer resistance and enhanced charge-transfer properties compared to those of the pristine electrode. Hence, the prepared hexagonal-shaped V₂O₅ is a suitable material for the elimination of environmental contaminants from the polluted water as well as water splitting for hydrogen generation.

On-Site Application of Solar-Activated Membrane (Cr-Mn-Doped TiO2@Graphene Oxide) for the Rapid Degradation of Toxic Textile Effluents

Solar-activated water treatment has become an emerging research field due to its eco-friendly nature and the economic feasibility of green photocatalysis. Herein, we synthesized promising, cost-effective, and ultralong-semiconductor TiO₂ nanowires (NW), with the aim to degrade toxic azo dyes. The band gap of TiO₂ NW was tuned through transition metals, i.e., chromium (Cr) and manganese (Mn), and narrowed by conjugation with high surface area graphene oxide (GO) sheets. Cr-Mn-doped TiO₂ NWs were chemically grafted onto GO nanosheets and polymerized with sodium alginate to form a mesh network with an excellent band gap (2.6 eV), making it most suitable to act as a solar photocatalytic membrane. Cr-Mn-doped TiO₂ NW @GO aerogels possess high purity and crystallinity confirmed by Energy Dispersive X-ray spectroscopy and X-ray diffraction pattern. A Cr-Mn-doped TiO₂ NW @GO aerogels membrane was tested for the photodegradation of Acid Black 1 (AB 1) dye. The synthesized photocatalytic membrane in the solar photocatalytic reactor at conditions optimized by response surface methodology (statistical model) and upon exposure to solar radiation (within 180 min) degraded 100% (1.44 kg/m³/day) AB 1dye into simpler hydrocarbons, confirmed by the disappearance of dye color and Fourier transform infrared spectroscopy. An 80% reduction in water quality parameters defines Cr-Mn-doped TiO₂ NW @GO aerogels as a potential photocatalytic membrane to degrade highly toxic pollutants.

A Review on Resource Utilization of Spent V-W-Ti Based Selective Catalytic Reduction Catalysts

To address the environmental pollution caused by nitrogen oxides, V₂O₅-WO₃/TiO₂ is widely used as a catalyst based on selective catalytic reduction (SCR) technology. However, spent SCR catalysts pose a potential hazard to the environment due to the presence of heavy metals. This problem continues to plague countries with predominantly thermal power generation, and landfills as the dominant disposal method wastes significant metal resources. Previous research into the recovery of these metal resources has received considerable attention. Here, we summarise the methods of recovery and find that research trends are beginning to move towards improving the added value of recovered products. One very promising application is photocatalysts; however, the atomic efficiency of current methods is not satisfactory. Therefore, this review first focuses on the regeneration of spent SCR catalysts and the processes used for elemental extraction to clarify what forms of V, W and Ti can be obtained from existing processes. This is followed by providing directions for the conversion of spent SCR catalysts into photocatalysts with improvements based on such processes. From a different perspective, this also provides a new resource for photocatalysts and is expected to significantly reduce the cost of photocatalyst production.

Catalytic Reduction of Dyes and Antibacterial Activity of AgNPs@Zn@Alginate Composite Aerogel Beads

This work focuses on the preparation of aerogel composite beads based on Zn(II)-crosslinked alginate and loaded with different percentages of AgNPs using a simple approach. The obtained samples were evaluated in two different applications: the first application consists in their use as catalysts for the reduction of MB, MO, OG and CR dyes in a simple and binary system under the presence of NaBH₄. For this, several parameters affecting the catalytic behavior of these catalysts have been investigated and discussed such as the catalyst mass, AgNPs content, dye nature, and the selectivity of the catalyst in a binary system. The second application concerns their antibacterial activities towards two Gram-negative bacteria Escherichia coli (ATCC 25922), and Pseudomonas aeruginosa (ATCC 27853), and a Gram-positive bacteria Staphylococcus aureus (ATCC 25923). The physico-chemical properties of different samples were characterized by XRD, FTIR, SEM/EDS, and TGA analysis. The obtained results confirmed the presence of AgNPs on a highly porous alginate structure. The dispersion of a high percentage of AgNPs leads to the formation of nanoparticles on the outer surface of the alginate which led to their leaching after the catalytic test, while the composite having a low percentage of AgNPs showed good results through all dyes without leaching of AgNPs. For the antibacterial application of the different samples, it was shown that a composite with a higher percentage of AgNPs was the most effective against all bacteria.

A review on activated carbon modifications for the treatment of wastewater containing anionic dyes

Polluted water resources, particularly those polluted with industrial effluents' dyes, are carcinogenic and hence pose a severe threat to sustainable and longstanding worldwide development. Meanwhile, adsorption is a promising process for polluted/wastewater treatment. In particular, activated carbon (AC) is popular among various wastewater treatment adsorbents, especially in the organic contaminants' remediation in wastewater. Hence, the AC's synthesis from degradable and non-degradable resources, the carbon activation involved in the AC synthesis, and the AC's modification to cutting-edge and effective materials have been modern-research targets in recent years. Likewise, the main research focuses worldwide have been the salient AC characteristics, such as its surface chemistry, porosity, and enhanced surface area. Notably, various modified-AC synthesis methods have been employed to enhance the AC's potential for improved contaminants-removal. Hence, we critically analyze the different modified ACs (with enhanced (surface) functional groups and textural properties) of their capacity to remove different-natured anionic dyes in wastewater. We also discuss the corresponding AC modification techniques, the factors affecting the AC properties, and the modifying agents' influence on the AC's morphological/adsorptive properties. Finally, the AC research of future interest has been proposed by identifying the current AC research gaps, especially related to the AC's application in wastewater treatment.

High-Surface-Area-Activated Carbon Derived from Mango Peels and Seeds Wastes via Microwave-Induced ZnCl2 Activation for Adsorption of Methylene Blue Dye Molecules: Statistical Optimization and Mechanism

In this study, Mango (Mangifera indica) seeds (MS) and peels (MP) seeds mixed fruit wastes were employed as a renewable precursor to synthesize high-surface-area-activated carbon (MSMPAC) by using microwave-induced ZnCl₂ activation. Thus, the applicability of MSMPAC was evaluated towards the removal of cationic dye (methylene blue, MB) from an aqueous environment. The key adsorption factors, namely A: MSMPAC dose (0.02–0.1 g), B: pH (4–10), and C: time (5–15 min), were inspected using the desirability function of the Box-Behnken design (BBD). Thus, the adsorption isotherm data were found to correspond well with the Langmuir model with a maximum adsorption capacity of (232.8 mg/g). Moreover, the adsorption kinetics were consistent with both pseudo-first-order and pseudo-second-order models. The spontaneous and endothermic nature of MB adsorption on the MSMPAC surface could be inferred from the negative ∆G° values and positive value of ∆H°, respectively. Various mechanisms namely electrostatic forces, pore filling, π-π stacking, and H-bonding govern MB adsorption by the MSMPAC. This study demonstrates the utility of MS and MP as renewable precursors to produce high-surface area MSMPAC with a potential application towards the removal of cationic organic dyes such as MB.

Membrane Water Treatment for Drinking Water Production from an Industrial Effluent Used in the Manufacturing of Food Additives

An integrated membrane process for treatment of effluents from food additive manufacturing was designed and evaluated on a laboratory scale. The principal focus was water recovery with the possibility of its reuse as potable water. The industrial effluent presented high content of dyes and salts. It was red in color and presented brine characteristics. The whole effluent was fed into the integrated process in continuous flow. The steps of the process are as follows: sedimentation (S), adsorption by activated carbon (AC), ion exchange using resins (IEXR), and reverse osmosis (RO) (S–AC–IEXR–RO). The effect of previous operations was evaluated by stress-rupture curves in packaged columns of AC and IEXR, membrane flux, and fouling dominance in RO. Fouling was evaluated by way of the Silt Density Index and membrane resistance examination during effluent treatment. The integrated membrane process provided reclaimed water with sufficiently high standards of quality for reuse as potable water. AC showed a high efficiency for color elimination, reaching its rupture point at 20 h and after 5L of effluent treatment. IEXR showed capacity for salt removal, providing 2.2–2.5 L of effluent treatment, reaching its rupture point at 11–15 h. As a result of these previous operations and operating conditions, the fouling of the RO membrane was alleviated, displaying high flux of water: 20–18 L/h/m² and maintaining reversible fouling dominance at a feed flow rate of 0.5–0.7 L/h. The characteristics of the reclaimed water showed drinking water standards