Synthesis of lignin-poly(N-methylaniline)-reduced graphene oxide hydrogel for organic dye and lead ions removal

Lignin: A valuable and promising bio-based absorbent for dye removal applications

The importance of environmental issues and the existence of humans have led to the recognition of environmental concerns as the main risk to modern life. Notably, one major concern for protecting and managing the environment and human health is the presence of dyes in wastewater. Therefore, before discharging wastewater into mainstream water, it is crucial to remove dyes. Among all lignocellulosic materials, lignin is a highly fragrant biopolymer. Its abundant availability, complex structure, and numerous functional moieties, including hydroxyl, carboxyl, and phenolic, are used in different chemicals and applications. Based on this, lignin is a very useful green material for adsorption, specifically in removing both heavy metals and organic pollutants from wastewater. This article describes the use of lignin-based adsorbents as a recent breakthrough in the removal of dye from aqueous solutions. On the other hand, the review intends to encourage readers to study both established and novel avenues in lignin-based dye removal materials.

Enhanced photocatalytic regeneration of carboxymethyl cellulose/lignin/ZnO complex hydrogel after methylene blue adsorption

The biodegradable, nontoxic, and renewable carboxymethyl cellulose (CMC) hydrogel has been developed into a green adsorbent. However, the weak chemical interaction limits its adsorption capability and reusability. This work incorporated lignin with complex structure and ZnO nanoparticles with photocatalytic properties into CMC hydrogel beads to improve the removal of methylene blue (MB) through chemical interaction. Scanning electron microscopic images and Fourier-transform infrared spectra confirmed the compatibility between lignin and ZnO nanoparticles as well as the increment of active sites for dye removal. The MB adsorption on CMC hydrogel beads was more significantly affected by the temperate and initial concentration compared to contact time, pH, and adsorbent dosage. The MB adsorption capacity of CMC hydrogel was improved to 276.79 mg/g after incorporating lignin and ZnO nanoparticles. The adsorption followed the pseudo-second-order kinetic model and Langmuir isotherm model, indicating chemical adsorption. After 6 cycles, the adsorption capacity was reduced by about 15 %. The UV irradiation could recover and improve MB adsorption capacity of CMC hydrogel beads containing ZnO nanoparticles due to the introduction of reactive oxygen species.

Environmental applications of lignin-based hydrogels for Cu remediation in water and soil: adsorption mechanisms and passivation effects

Heavy metal pollution, particularly the excessive release of copper (Cu), is an urgent environmental concern. In this study, sodium lignosulfonate/carboxymethyl sa-son seed gum (SL-Cg-g-PAA) designed for remediation of Cu-contaminated water and soil was successfully synthesized through a free radical polymerization method using lignin as a raw material. This hydrogel exhibits remarkable Cu adsorption capability when applied to water, with a maximum adsorption capacity reaching 172.41 mg/g. Important adsorption mechanisms include surface complexation and electrostatic attraction between Cu(Ⅱ) and oxygen-containing functional groups (-OH, -COOH), as well as cation exchange involving -COONa and -SO3Na. Furthermore, SL/Cg-g-PAA effectively mitigated the bioavailability of heavy metals within soil matrices, as evidenced by a notable 14.1% reduction in DTPA extracted state Cu (DTPA-Cu) content in the S4 treatment (0.7% SL/Cg-g-PAA) compared to the control group. Concurrently, the Cu content in both the leaves and roots of pakchoi exhibited substantial decreases of 55.19% and 36.49%, respectively. These effects can be attributed to the precipitation and complexation reactions facilitated by the hydrogel. In summary, this composite hydrogel is highly promising for effective remediation of heavy metal pollution in water and soil, with a particular capability for the immobilization of Cu(Ⅱ) and reduction of its adverse effects on ecosystems.

Target-regulated photoactivities of CdS/Ni-MOF heterojunction with [Ru(bpy)2dppz]2+ intercalator: a bisphenol A photoelectrochemical aptasensor

Bisphenol A (BPA), an important endocrine disrupting compound, has infiltrated human daily lives through electronic devices, food containers, and children's toys. Developing of novel BPA assay methods with high sensitivity holds tremendous importance in valuing the pollution state. Here, we constructed an ultrasensitive photoelectrochemical (PEC) aptasensor for BPA determination by regulating photoactivities of CdS/Ni-based metal-organic framework (CdS/Ni-MOF) with [Ru(bpy)2dppz]2+ sensitizer. CdS/Ni-MOF spheres exhibited excellent photocatalytic performance, serving as a potential sensing platform for the construction of target recognition process. [Ru(bpy)2dppz]2+ were embedded into DNA double-stranded structure, functioning as sensitizer for modulating the signal response of the developed PEC aptasensor. The proposed PEC sensor exhibited outstanding analytical performances, including a wide linear range (0.1 to 1000.0 nM), low detection limit (0.026 nM, at 3σ/m), excellent selectivity, and high stability. This work provides a perspective for the design of ideal photosensitive materials and signal amplification strategies and extends their application in environment analysis.

Construction of a novel ursolic acid-based supramolecular gel for efficient removal of iodine from solution

Pentacyclic triterpenes is a natural amphipathic product which possess a rigid backbone and several polar functional groups such as hydroxyl, carbonyl and carboxyl groups. The amphipathic character makes it easy to realize self-assemble into complex nano structure and therefore attract extensive attention due to the simple synthetic processes and renewable raw materials. Hence, a novel Ursolic acid-based hydrogel was prepared successfully via a simple self-assembly of triterpenoid derivative in methanol by capture water molecule in air. The resulting hydrogel show a porous morphology and good elasticity including strong heat resistance. Based on the characteristic above, the hydrogel showed a good iodine adsorption capacity and can removal 75.0% of the iodine from cyclohexane solution and 66.3% from aqueous solution within 36 h. Data analysis indicate that all the iodine adsorption process are dominated by chemisorption and belongs to the multi-site adsorption on heterogenous surfaces. In addition, the obtained hydrogel also possesses a good recyclability which can maintain more than 82% of its capacity after 5 cycles. The simple preparation method and easily available raw materials endow it a great potential in future pollutant treatment.

Constructing a composite microfiltration carbon membrane by TiO2 and Fe2O3 for efficient separation of oil-water emulsions

Membrane-based separation technology has attracted enormous attention for oil/water emulsion treatment. Here, composite microfiltration carbon membranes (MCMs) were prepared from the precursor of phenolic resin doping with TiO2 and Fe2O3 via the processes of stereotype and pyrolysis. The functional groups, thermal stability, porous structure, microstructure, morphology, and hydrophilicity of the membrane samples were analyzed by Fourier-transform infrared spectroscopy, thermogravimetric analysis, bubble pressure method, X-ray diffraction, scanning electron microscope, and water contact angle, respectively. The effect of dopant amount on the separation performance of MCMs was investigated. The results show that a mixed matrix system is constructed by TiO2 and Fe2O3 in MCMs, which is beneficial for further optimizing the pore size, porosity, and hydrophilicity of MCMs for oily wastewater treatment by varying the dopant amount. The maximum oil rejections are achieved at 98.9% and 99.6% for MCMs with a dopant content of TiO2 and Fe2O3 at 25%, respectively. In brief, this study offers an attractive strategy for improving the separation performance of MCMs for oily wastewater.

Effect of Chemical and Steam Explosion Pulping on the Physical and Mechanical Properties of Sugarcane Straw Pulp Trays

Sugarcane straw fiber (SSF) samples were prepared by chemical pulping (CP) and steam explosion (STE). CP (5, 10, 15% NaOH + 0.2% w/w anthraquinone at 121 °C for 1 h) and STE pressure (1.77, 1.96, and 2.16 MPa at 220 °C for 4 min) SSF trays were molded with a hydraulic hot-press machine at 120 °C, 7 min, and 1.72 MPa. The yield (%) of SSF from STE (54-60% dry basis (db.)) was higher than CP (32-48% db.). STE trays had greater tensile strength than CP. However, STE's elongation and compression strength was lower than CP tray samples. The trays made from SSF using STE had less swelling in thickness, longer water wetting time, and a higher water contact angle than those made from CP. The micrographs displayed a smaller size of SSF obtained in STE than the CP. The appearance and area of peaks in ATR-FTIR spectra and XRD diffractograms, respectively, revealed that the STE trays had a larger residual lignin content from the lignin study and a lower crystallinity index than the CP trays. Moreover, the lightness values of the STE trays were lower than those of the CP trays due to lignin retention. The study results indicate that CP is the preferred method for producing SSF packaging material with high flexibility and fiber purity. However, when considering the specific SF of 4.28, the STE treatment showed superior physical and mechanical properties compared to CP. This suggests that STE could be an excellent alternative green pulping technique for producing durable biobased trays. Overall, the findings highlight the potential of STE as a viable option for obtaining trays with desirable characteristics, providing a sustainable and efficient approach to tray production.

Dynamics of reduced graphene oxide: synthesis and structural models

Technological advancements are leading to an upsurge in demand for functional materials that satisfy several of humankind's needs. In addition to this, the current global drive is to develop materials with high efficacy in intended applications whilst practising green chemistry principles to ensure sustainability. Carbon-based materials, such as reduced graphene oxide (RGO), in particular, can possibly meet this criterion because they can be derived from waste biomass (a renewable material), possibly synthesised at low temperatures without the use of hazardous chemicals, and are biodegradable (owing to their organic nature), among other characteristics. Additionally, RGO as a carbon-based material is gaining momentum in several applications due to its lightweight, nontoxicity, excellent flexibility, tuneable band gap (from reduction), higher electrical conductivity (relative to graphene oxide, GO), low cost (owing to the natural abundance of carbon), and potentially facile and scalable synthesis protocols. Despite these attributes, the possible structures of RGO are still numerous with notable critical variations and the synthesis procedures have been dynamic. Herein, we summarize the highlights from the historical breakthroughs in understanding the structure of RGO (from the perspective of GO) and the recent state-of-the-art synthesis protocols, covering the period from 2020 to 2023. These are key aspects in the realisation of the full potential of RGO materials through the tailoring of physicochemical properties and reproducibility. The reviewed work highlights the merits and prospects of the physicochemical properties of RGO toward achieving sustainable, environmentally friendly, low-cost, and high-performing materials at a large scale for use in functional devices/processes to pave the way for commercialisation. This can drive the sustainability and commercial viability aspects of RGO as a material.

Prussian blue composite microswimmer based on alginate-chitosan for biofilm removal

Bacterial infections pose a serious threat to public health, causing worldwide morbidity and about 80 % of bacterial infections are related to biofilm. Removing biofilm without antibiotics remains an interdisciplinary challenge. To solve this problem, we presented a dual-power driven antibiofilm system Prussian blue composite microswimmers based on alginate-chitosan, which designed into an asymmetric structure to achieve self-driven in the fuel solution and magnetic field. Prussian blue embedded in the microswimmers given it the ability to convert light and heat, catalyze Fenton reaction, and produce bubbles and reactive oxygen species. Moreover, with the addition of Fe₃O₄, the microswimmers could move in group under external magnetic field. The composite microswimmers displayed excellent antibacterial activity against S. aureus biofilm with an efficiency as high as 86.94 %. It is worth mentioning that the microswimmers were fabricated with device-simple and low-cost gas-shearing method. This system integrating physical destruction, chemical damage such chemodynamic therapy and photothermal therapy, and finally kill the plankton bacteria embedded in biofilm. This approach may cause an autonomous, multifunctional antibiofilm platform to promote the present most areas with harmful biofilm difficult to locate the surface for removal.

Lignin/sodium alginate hydrogel for efficient removal of methylene blue

In this work, a class of bio-based hydrogels (LN-NH-SA hydrogel) were prepared from aminated lignin and sodium alginate. The physical and chemical properties of the LN-NH-SA hydrogel were fully characterized using field emission scanning electron microscopy, thermogravimetric analysis, fourier transform infrared spectroscopy, N₂ adsorption-desorption isotherms, and other techniques. LN-NH-SA hydrogels were tested for the adsorption of dyes (methyl orange and methylene blue). The LN-NH-SA@3 hydrogel showed better adsorption efficiency for MB with a maximum adsorption capacity of 388.81 mg·g^-1, a bio-based adsorbent with a high adsorption capacity. The adsorption process followed the pseudo-second-order model and fitted to the Freundlich isotherm equation. More importantly, LN-NH-SA@3 hydrogel maintained 87.64 % adsorption efficiency after 5 cycles. Overall, the proposed hydrogel with environmentally friendly and low cost is promising for the absorption of dye contamination.

Lignin-based nitrogen/sulfur dual-doped nanosheets decorated with Co1-xS nanoparticles as efficient bifunctional oxygen electrocatalysts

The development of efficient, cost-effective, bifunctional cathode catalyst materials to replace precious metals is highly attractive for the fabrication of Zn-air battery. Here, the three-dimensional N and S co-doped carbon nanosheets loaded with cobalt sulfide nanoparticles (Co_1-xS@SNFC) for bifunctional oxygen electrocatalysis were synthesized with Co(NO₃)₂·6H₂O as the Co source, lignin as the carbon source, thiourea as the nitrogen/ sulfur source, and MgO as the template. The synergistic effect of multiple active sites gives the Co_1-xS@SNFC fast electrochemical kinetic properties and excellent stability to oxygen reduction reactions (ORR) and oxygen evolution reactions (OER). The half-wave potential and overpotential of Co_1-xS@SNFC were 0.84 mV and 306 mV, respectively, which is closed to commercial noble metal catalysts. In addition, Co_1-xS@SNFC exhibited four-electron transfer characteristics and ultra-low tafel slope. Compared with commercial Pt/C, the Zn-air battery assembled from Co_1-xS@SNFC exhibited a low voltage gap of polarization curve (0.75 V) between charging and discharge and high power density (207 mWcm^-2) in alkaline electrolyte. This work developed a green and novel fabrication approach for the synthesis of bifunctional electrocatalyst and provides a new idea for high-value utilization of biomass.

A review on remediation of dye adulterated system by ecologically innocuous "biopolymers/natural gums-based composites"

The mitigation of wastewater exploiting biopolymers/natural gums-based composites is an appealing research theme in today's scenario. The following review presents a comprehensive description of the polysaccharides derived from biopolymers (chitosan, collagen, cellulose, starch, pectin, lignin, and alginate) and natural gums (guar, gellan, carrageenan, karaya, moringa oliefera, tragacanth, and xanthan gum). These biopolymers/natural gums-based composites depicted excellent surface functionality, non-toxicity, economic and environmental viability, which corroborated them as potential candidates in the decontamination process. The presence of -OH, -COOH, and -NH functional groups in their backbone rendered them tailorable for modification/functionalization, and anchor an array of pollutants via electrostatic interaction, hydrogen bonding, and Van der Waals forces. Further, due to these functional moieties, these bio-based composites revealed an excellent adsorption capacity than conventional adsorbents. This review provides an overview of the classification of biopolymers/natural gums based on their origin, different ways of their modification, and the remediation of dye-contaminated aqueous environments employing diverse bio-based adsorbents. The isotherm, kinetic modelling along with thermodynamics of the adsorption process is discussed. Additionally, the reusable efficacy of these bio-adsorbents is reviewed.

Lignin nanoparticles-reduced graphene oxide based hydrogel: A novel strategy for environmental applications

In this work, facile fabrication of lignin nanoparticles (L_NP)-based three-dimensional reduced graphene oxide hydrogel (rGO@L_NP) has been demonstrated as a novel strategy for environmental applications. Herein, L_NP were facilely synthesized from walnut shell waste through a direct chemical route. These L_NP were incorporated into the continuous porous network of rGO network to fabricate rGO@L_NP hydrogel. Characterization studies were carried out using various analytical techniques viz. scanning electron microscopy, Fourier transform IR spectroscopy, X-ray diffraction and thermogravimetric analysis. The efficiency of rGO@L_NP hydrogel as adsorptive platform was evaluated by employing methylene blue and Pb²⁺ as model pollutants, whilst the effect of various experimental parameters was ascertained for optimal performance. Furthermore, Agar well diffusion method was used to check the antibacterial activities of the hydrogel using two bacterial pathogenic strains, i.e. Klebsiella pneumoniae (gram negative) and Enterococcus faecalis (gram positive). Results showed that after the inclusion of L_NP into rGO hydrogel, there was a marked improvement in pollutant's uptake ability and compared to bare L_NP and rGO, the composite hydrogel showed enhanced bactericidal effect. Overall, this approach is outstanding because of the synergy of functional properties of nano-lignin and rGO due to multi-interaction sites in the resulting hydrogel. The results presented herein support the application of rGO@L_NP as innovative water filter material for scavenging broad spectrum pollutants and bactericidal properties.

Chitosan enhanced the stability and antibiofilm activity of self-propelled Prussian blue micromotor

The emergence, spread and difficult removal of bacteria biofilm, represent an ever-increasing persistent infections and medical complications challenge worldwide. Herein, a self-propelled system Prussian blue micromotor (PB MMs) were constructed by gas-shearing technology for efficient degradation of biofilms by combining chemodynamic therapy (CDT) and photothermal therapy (PTT). With the interpenetrating network crosslinked by alginate, chitosan (CS) and metal ions as the substrate, PB was generated and embedded in the micromotor at the same time of crosslinking. The micromotors are more stable and could capture bacteria with the addition of CS. The micromotors show excellent performance, containing photothermal conversion, reactive oxygen species (ROS) generation and bubble produced by catalyzing Fenton reaction for motion, which served as therapeutic agent could chemically kill bacteria and physically destroy biofilm. This research work opens a new path of an innovative strategy to efficiently remove biofilm.

An ultrasensitive electrochemical biosensor for bisphenol A based on aptamer-modified MrGO@AuNPs and ssDNA-functionalized AuNP@MBs synergistic amplification

Bisphenol A (BPA) is a harmful endocrine disruptor, sensitive and rapid quantification of BPA is highly desirable. In this work, a novel synergistic signal-amplifying electrochemical biosensor was developed for BPA detection by using a recognition probe (RP) constructed by BPA aptamer modified gold nanoparticles-loaded magnetic reduced graphene oxide (Aptamer-MrGO@AuNPs), and a signal probe (SP) constructed by BPA aptamer-complementary single-stranded DNA (ssDNA) functionalized methylene blue (MB)-loaded gold nanoparticle (ssDNA-AuNP@MBs). The RP and SP can self-assemble to form a stable RP-SP complex through complementary base pairing. The current intensity of the biosensor correlates with the number of RP-SP complexes. In the presence of BPA, the BPA aptamer can capture BPA with high selectivity and affinity, form an RP-BPA complex and dissociate the RP-SP complex to release SP, resulting in a decrease in the current signal intensity of the biosensor. A single AuNP could be loaded with multiple BPA aptamers and MBs, which improves the recognition efficiency and enhances the signal intensity. Due to the magnetic properties of MrGO@AuNPs, the magnetic separation and adsorption of RP or RP-SP complex is very convenient, enabling all reaction processes to be carried out in solution, which not only improves the mass transfer efficiency, but also simplifies the operation. Under optimal conditions, the developed biosensor had a detection limit as low as 0.141 pg/mL and had been successfully applied to the detection of real environmental water samples. Therefore, the synergistic signal amplification strategy of RP and SP has potential value in the detection of trace pollutants in the water environment.

Blow-Spun Nanofibrous Membrane for Simultaneous Treatment of Emulsified Oil/Water Mixtures, Dyes, and Bacteria

Membrane separation is of great significance due to its unique performance in treating wastewater. However, the simultaneous treatment of oily emulsions and other complex pollutants in water remains challenging. Herein, we have proposed a simple strategy to prepare a multifunctional titanium dioxide/silver nanoparticles/polyacrylonitrile (TiO₂/AgNPs/PAN) nanofibrous membrane. The experimental results showed that the combination of the hierarchical structure composed of PAN nanofibers and Ag/TiO₂ nanoprotrusions contributed to the superhydrophilicity and superoleophobicity (UOCA = 153.3 ± 2.0°). Further, the nanofibrous membrane exhibited a rapid gravity-driven permeate flux (>1829.37 ± 83.51 L m^-2 h^-1) and an ultrahigh separation efficiency (>99.9%) for the surfactant-stabilized oil/water emulsions. Moreover, due to the synergistic effect between the PAN fibers and TiO₂/Ag heterojunction, Rhodamine B dye in water can be removed quickly and efficiently (up to 97.67% in 90 min). More importantly, the obtained nanofibrous membrane exhibited ultrahigh stability in different harsh environments. The design of superoleophobic nanofiber membrane with a high separation efficiency and high photocatalytic activity has great potential for practical applications in the purification of oily wastewater.

Biocarbons Obtained from Fennel and Caraway Fruits as Adsorbents of Methyl Red Sodium Salt from Water System

The aim of this study was to prepare biocarbons by biomass activation with carbon(IV) oxide. Fennel and caraway fruits were used as the precursors of bioadsorbents. The impact of the precursor type and temperature of activation on the physicochemical properties of the obtained biocarbons and their interaction with methyl red sodium salt upon adsorption process have been checked. The obtained bioadsorbents were characterized by determination of-low temperature nitrogen adsorption/desorption, elemental analysis, ash content, Boehm titration, and pH of water extracts. The biocarbons have surface area varying from 233-371 m²/g and basic in nature with acidic/basic oxygen-containing functional groups (3.23-5.08 mmol/g). The adsorption capacity varied from 63 to 141 mg/g. The influence of different parameters, such as the effectiveness of methyl red sodium salt adsorption, was evaluated. The adsorption kinetics was well fitted using a pseudo-second-order model. The Freundlich model best represented the equilibrium data. The amount of adsorbed dye was also found to increase with the increasing temperature of the process.

Characterization of Date Seed Powder Derived Porous Graphene Oxide and Its Application as an Environmental Functional Material to Remove Dye from Aqueous Solutions

This study aims to prepare graphene oxide (GO) from raw date seeds (RDSs), considered one of the available agricultural wastes in Saudi Arabia. The preparation method is done by the conversion of date seeds to lignin and then to graphite which is used in a modified Hummer's method to obtain GO. The adsorption of insoluble phenothiazine-derived dye (PTZS) over raw date Seeds (RDSs) as a low-cost adsorbent was investigated in this study. X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR) were used to characterize (RDSs). According to the calculations, Freundlich isotherms and pseudo-second-order accurately predicted the kinetic rate of adsorption. The adsorption ability was 4.889 mg/g, and the removal rate was 93.98% GO-date Seeds mass, 11 mg/L starting dye concentration, at a temperature of 328 K, pH 9, and contact length of 30 min by boosting the PTZS solution's ionic strength. In addition, the computed free energies revealed that the adsorption process was physical. Thermodynamic calculations revealed that dye adsorption onto GO-date seeds was exothermic and spontaneous.

Facile Preparation of a Bispherical Silver-Carbon Photocatalyst and Its Enhanced Degradation Efficiency of Methylene Blue, Rhodamine B, and Methyl Orange under UV Light

The combination of organic and inorganic materials is attracting attention as a photocatalyst that promotes the decomposition of organic dyes. A facile thermal procedure has been proposed to produce spherical silver nanoparticles (AgNPs), carbon nanospheres (CNSs), and a bispherical AgNP-CNS nanocomposite. The AgNPs and CNSs were each synthesized from silver acetate and glucose via single- and two-step annealing processes under sealed conditions, respectively. The AgNP-CNS nanocomposite was synthesized by the thermolysis of a mixture of silver acetate and a mesophase, where the mesophase was formed by annealing glucose in a sealed vessel at 190 °C. The physicochemical features of the as-prepared nanoparticles and composite were evaluated using several analytical techniques, revealing (i) increased light absorption, (ii) a reduced bandgap, (iii) the presence of chemical interfacial heterojunctions, (iv) an increased specific surface area, and (v) favorable band-edge positions of the AgNP-CNS nanocomposite compared with those of the individual AgNP and CNS components. These characteristics led to the excellent photocatalytic efficacy of the AgNP-CNS nanocomposite for the decomposition of three pollutant dyes under ultraviolet (UV) radiation. In the AgNP-CNS nanocomposite, the light absorption and UV utilization capacity increased at more active sites. In addition, effective electron-hole separation at the heterojunction between the AgNPs and CNSs was possible under favorable band-edge conditions, resulting in the creation of reactive oxygen species. The decomposition rates of methylene blue were 95.2, 80.2, and 73.2% after 60 min in the presence of the AgNP-CNS nanocomposite, AgNPs, and CNSs, respectively. We also evaluated the photocatalytic degradation efficiency at various pH values and loadings (catalysts and dyes) with the AgNP-CNS nanocomposite. The AgNP-CNS nanocomposite was structurally rigid, resulting in 93.2% degradation of MB after five cycles of photocatalytic degradation.

Electrochemical oxidation of pretreated landfill leachate nanofiltration concentrate in terms of pollutants removal and formation of by-products

This study compares the efficiencies of active (Ti/TiO₂-RuO₂-IrO₂ (TIR)) and inactive (Ni/Boron Doped Diamond (BDD)) anodes in terms of pollutant treatment and by-product formation in pretreated (chemical coagulation) landfill leachate nanofiltration membrane concentrate (PLNC). PLNC has high chemical oxygen demand (COD:4900 mg/L), total organic carbon (TOC: 1874 mg/L), total Kjeldahl nitrogen (TKN: 520 mg/L), ammonium nitrogen (NH₃-N: 21.35 mg/L), chloride (5700 mg/L) and sulfate (9000 mg/L - due to coagulant type). The parameters of COD, TOC, NH₃-N, TKN, free and combined chlorine species, halogenated organic compounds (HOCs), adsorbable organic halogens (AOX), and nitrate at different current density (J: 111-555 A/m²) and initial pH (pH_i:3.5-7) were compared for both anodes. The removal efficiencies at the optimum conditions (pH_i 5.5, 333 A/m² and 8 h) were obtained as 86.4% COD, 77.4% TOC, 93.4% TKN, 94.4% NH₃-N with BDD and 34.3% COD, 27.3% TOC, 93.7% TKN, 97.4% NH₃-N with TIR. According to gas chromatography-mass spectrometry (GC-MS) results obtained under optimum conditions, haloalkane/alkene, halonitroalkane, halonitrile, haloketone, haloalcohols, haloacids, haloaldehydes, haloamines/amides on both electrodes were detected as species of HOCs. In addition, the highest nitrate concentration was observed at the TIR anode, while the highest AOX concentration was observed at the BDD anode.

Cellulose-based thermosensitive supramolecular hydrogel for phenol removal from polluted water

Pollution of phenolic effluent from spice and plastics factories has become increasingly serious. Thus, developing a green and highly efficient adsorbent to remove phenolic compounds from wastewater is of urgent need. In this study, cellulose graft copolymer was synthesized through grafting 4-vinylpyridine monomer and polyethylene glycol methacrylate to a molecular skeleton of cellulose by free radical polymerization. The supramolecular hydrogel was successfully synthesized by physical cross-linking of cellulose graft copolymer and α-cyclodextrin. These supramolecular hydrogels were thoroughly characterized and the adsorption performance (adsorption isotherms and adsorption kinetics) of phenol on the supramolecular hydrogel were investigated in batch operation. The supramolecular hydrogel not only exhibited excellent adsorption of phenol, but also demonstrated increased mechanical strength due to the introduction of a modified cellulose base material. The adsorption kinetics of phenol on the supramolecular hydrogel followed a quasi-second-order reaction, with a correlation coefficient of 0.9909. The adsorption isotherm conformed to the Langmuir adsorption isotherm, and the maximum adsorption capacity of phenol can reach 80.71 mg g^-1, which was 2-3 times higher than traditional carbon-based materials. The results demonstrate the great promise of the waste-derived supramolecular hydrogel to be used as an efficient adsorbent in wastewater treatment.

Immobilized Nanomaterials for Environmental Applications

Nanomaterials (NMs) have been extensively used in several environmental applications; however, their widespread dissemination at full scale is hindered by difficulties keeping them active in engineered systems. Thus, several strategies to immobilize NMs for their environmental utilization have been established and are described in the present review, emphasizing their role in the production of renewable energies, the removal of priority pollutants, as well as greenhouse gases, from industrial streams, by both biological and physicochemical processes. The challenges to optimize the application of immobilized NMs and the relevant research topics to consider in future research are also presented to encourage the scientific community to respond to current needs.

Lignosulfonate valorization into a Cu-containing magnetically recyclable photocatalyst for treating wastewater pollutants in aqueous media

This study presents an eco-friendly and economical process for preparing a magnetic copper complex conjugated to modified calcium lignosulfonate (LS) through a diamine (Fe₃O₄@LS@naphthalene-1,5-diamine@copper complex; FLN-Cu) as a green and novel catalyst. The prepared catalyst was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), Brunauer-Emmett-Teller (BET), energy-dispersive X-ray spectroscopy (EDS), elemental mapping, inductively coupled plasma-optical emission spectrometry (ICP-OES) and field emission scanning electron microscopy (FESEM) techniques. The photocatalytic performance of the synthesized FLN-Cu catalyst was investigated by the degradation of aqueous solutions of dyes such as Rhodamine B (RhB), methylene blue (MB), and Congo red (CR) under UV irradiation. The dye degradation was followed by UV-Vis (ultraviolet-visible) spectrophotometry by measuring the changes in absorbance. The effects of different factors such as pH, contact time, photocatalyst dosage, and initial concentration of dye on the adsorption percentage were also investigated. Moreover, the catalyst showed high stability and could be readily separated from the reaction media using a magnet and reused five times without a remarkable loss of catalytic ability.

Simple high-temperature annealing affords commercial carbon cloth with enhanced electrochemical performance for highly sensitive detection of imidacloprid

Imidacloprid (IDP) residue in modern agricultural production seriously endangers human health and environmental safety. The establishment of a rapid and efficient method for the detection of IDP residue can effectively prevent its harm to human health. Herein, we demonstrate the carbon cloth (CC) prepared by a high-temperature annealing strategy possesses enhanced electrochemical performance, which could be directly used in electrochemical IDP sensing. Annealed carbon cloth (ACC) is endowed with higher defects, rougher surfaces, more functional groups, more hydrophilic surface, and increased ion-accessible surface area. Furthermore, the ACC electrode shows superior electrocatalytic reduction activity towards IDP, possessing a wide linear range of 5-100 μM, a low detection limit of 0.04 μM, and high sensitivity of 35.58 μA mM^-1 cm^-2. Meanwhile, this sensor can be applied for sensing IDP in grapes and apples with a good recovery of 96.8-104.1%. Compared with other modified electrodes, the ACC electrode has the advantages of no binder, no complicated modification, excellent detection effect, low cost, and easy large-scale production. Consequently, this work designs a self-supporting metal-free electrode with high electrochemical performance, providing a new idea for the development of environmentally friendly IDP sensors.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO₂ NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO₂ is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO₂ photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO₂ photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO₂, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

PbS/graphene hybrid nanostructures coated glassy carbon electrode for the electrochemical sensing of copper ions in aqueous solution

In this research, we have studied the electrochemical sensing of Cu(II) ions in aqueous solution using PbS/Graphene composite nanostructure coated glassy carbon electrode (GCE). The SEM-EDAX analysis revealed that the lead sulphide nanocrystals are homogeneously embedded on the graphene nanosheets with an uniform particle size of 100 nm, and the elements presents 92.32% and Lead content of 5.45% and Sulfur content of 0.91%. Raman spectra exhibits G with respect to the E2g sp² hybridized C-C and D band with respect to the A1g mode in the disordered edge region of the GNS. The composite nanostructure coated GCE (PbS/Graphene/GCE) was prepared and its performance in the existence of metal ions such us Cd(II),Pb(II), Mg(II), Cu(II) and Ni(II) was studied using the current voltage curves in double distilled water within the scan rates of 25 to 300mVs-¹. The PbS/Graphene coated carbon electrode exhibited the higher anodic and cathodic peak current for copper solution than the other metal ions studied, which various linearly proportional to concentration. The electrochemical sensing characteristics PbS/GNS/GCE was found to be significant towards detecting Cu²⁺ ion within the concentration range of 1 × 10^-4 to 1 × 10^-8 M, with a lowest sensing detection limit of 1 × 10^-8 M.

Improvement of the bladder perfusion curative effect through tight junction protein degradation induced by magnetic temperature-sensitive hydrogels

Postoperative intravesical instillation of chemotherapy is a routine procedure for non-muscular invasive bladder cancer (NMIBC). However, traditional bladder perfusion methods have insufficient exposure time, resulting in unsatisfactory therapeutic effects. In the present study, a chitosan (CS)-based in situ forming depot (ISFD) delivery system, including Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MNP), CS, and β-glycerophosphate (GP) as main components, was synthesized. Pirarubicin (THP), as a chemotherapeutic drug, was loaded into the new system. Results showed that our carrier system (Fe₃O₄-THP-CS/GP) was converted into gel and attached to the bladder wall, possessing loose network structures with magnetic targeting and sustained release properties. Moreover, its retention time in bladder was more than 72 h accompanied by a suitable expansion rate and good degradation characteristics. The antitumor activities of Fe₃O₄-THP-CS/GP were more effective both in vitro and in vivo than the free THP solution. In the study of its mechanism, results showed that Fe₃O₄-THP-CS/GP suppressed the expression of occludin (OCLN) and affected tight junctions (TJ) between urothelial cells to promote THP absorption.

A zinc oxide nanorods/molybdenum disulfide nanosheets hybrid as a sensitive and reusable electrochemical sensor for determination of anti-retroviral agent indinavir

This work aims to develop an electrochemical sensor for the reusable and selective detection of trace levels of indinavir (IDV) as an anti-retroviral drug by using zinc oxide nano-rods/molybdenum disulfide nanosheets on a screen-printed electrode (ZnO NRs/MoS₂ NSs/SPE). Quantitative IDV detection was achieved using differential pulse voltammetry (DPV). The assay specificity was illustrated using interfering species and exhibited high specificity toward the IDV. The developed displayed a wide dynamic range, from 0.01 to 0.66 and 0.66-7.88 μM in Britton-Robinson (B-R) buffer, with a 0.007 μM limit of detection. The fabricated ZnO NRs/MoS₂ NSs/SPE electrode exhibited high sensitivity, stability, good reproducibility, and repeatability towards the sensing of IDV. It turned out that the hybrid electrochemical sensor's sensing performance was remarkably improved due to the synergistic effect between MoS₂ NSs and ZnO NRs, where the former affords a large active surface area and quick electron transfer. The reported sensor provides a new alternative for electrochemical detection of IDV and could expand the applications of metal nanoparticles in emerging technologies for monitoring drugs in real samples.

Graphene Oxide/Polyethylenimine Aerogels for the Removal of Hg(II) from Water

This article reports the synthesis of an aerogel involving reduced graphene oxide (rGO) and polyethylenimine (PEI), and describes its potential application as an effective sorbent to treat Hg(II) contaminated water. The rGO/PEI sorbent was synthetized using a supercritical CO₂ method. N₂ physisorption, electron microscopy, and elemental mapping were applied to visualize the meso/macroporous morphology formed by the supercritical drying. The advantages of the synthetized materials are highlighted with respect to the larger exposed GO surface for the PEI grafting of aerogels vs. cryogels, homogeneous distribution of the nitrogenated amino groups in the former and, finally, high Hg(II) sorption capacities. Sorption tests were performed starting from water solutions involving traces of Hg(II). Even though, the designed sorbent was able to eliminate almost all of the metal from the water phase, attaining in very short periods of time residual Hg(II) values as low as 3.5 µg L⁻¹, which is close to the legal limits of drinking water of 1–2 µg L⁻¹. rGO/PEI exhibited a remarkably high value for the maximum sorption capacity of Hg(II), in the order of 219 mg g⁻¹. All of these factors indicate that the designed rGO/PEI aerogel can be considered as a promising candidate to treat Hg(II) contaminated wastewater.

Synthesis and application of AuNi@AC nano adsorbents for the removal of Maxilon Blue 5G azo dye from aquatic mediums

In this research, gold-nicel supported on activated carbon (AC) nanoadsorbent (AuNi@AC) synthesized by following a series of physicochemical procedures was prepared for the removal of Maxilon Blue 5G (MB) which is a cationic textile dye. Experimental studies based on parameters specifically pH, contact time, nano catalytic adsorbent particle, initial MB dye concentration and temperature effect were conducted in aqueous solutions in a batch system. AuNi@AC nanoadsorbents (NAs) reached the equilibrium in 30 min under optimum conditions in adsorption of the dye. The pseudo-first, second-order, and intra-particle diffusion models were tested to evaluate a the experimental results. Adsorption kinetics were found to be represented by the pseudo-second-order model, and the maximum adsorption capacity (q_max.) was calculated to be 542.90 mg/g (or 2.041 mmol/g). The synthesized magnetic AuNi@AC nanoadsorbent showed a high-efficiency reusability effect of about 64% after five reuse runs. Also, thermodynamic function parameters such as activation energy (Ea), Gibbs free energy (ΔG *), and entropy (ΔS *) were investigated in the sorption study. After all evaluation of data, it was concluded that the novel AuNi@AC nanoadsorbent could be considered as an effective support material for the removal of various organic pollutants in aquation solution especially for the removal of MB.

Magnetic nanoparticles based on cerium MOF supported on the MWCNT as a fluorescence quenching sensor for determination of 6-mercaptopurine

In this study, a new magnetic nanocomposite was developed as an efficient and fast-response fluorescence quenching sensor for determination of anticancer drug 6-mercaptopurine (6-MP). For this purpose, the needle-shape fluorescence metal-organic framework of cerium (Ce-MOF) were successfully synthesized on the surface of multiwalled carbon nanotubes using 1,3,5-benzenetricarboxylic acid ligand via a facile solvothermal assisted route and magnetized. The accuracy of the proposed synthesis was confirmed using the FT-IR, FE-SEM, XRD, and VSM methods. The obtained product as presented the fluorescence emission in 331 nm by excitation of 293 nm in excitation/emission slit widths of 10.0 nm. The operation of suggested method is based on quenching the fluorescence signal in accordance with increasing the 6-MP concentration. The proposed assay effectively detected the trace amount of 6-MP in the linear range of 1.0 × 10^-6 to 7 × 10^-5 M. The limit of detection and limit of quantification were obtained as 8.6 × 10^-7 and 2.86 × 10^-6 M, respectively. The analyte molecule was determined in real samples with satisfactory recoveries between 98.75 and 105.33.

Microfluidics-Assisted Fluorescence Mapping of DNA Phosphorothioation

As the key player of a new restriction modification system, DNA phosphorothioate (PT) modification, which swaps oxygen for sulfur on the DNA backbone, protects the bacterial host from foreign DNA invasion. The identification of PT sites helps us understand its physiological defense mechanisms, but accurately quantifying this dynamic modification remains a challenge. Herein, we report a simple quantitative analysis method for optical mapping of PT sites in the single bacterial genome. DNA molecules are fully stretched and immobilized in a microfluidic chip by capillary flow and electrostatic interactions, improving the labeling efficiency by maximizing exposure of PT sites on DNA while avoiding DNA loss and damage. After screening 116 candidates, we identified a bifunctional chemical compound, iodoacetyl-polyethylene glycol-biotin, that can noninvasively and selectively biotinylate PT sites, enabling further labeling with streptavidin fluorescent nanoprobes. With this method, PT sites in PT⁺ DNA can be easily detected by fluorescence, while almost no detectable ones were found in PT^- DNA, achieving real-time visualization of PT sites on a single DNA molecule. Collectively, this facile genome-wide PT site detection method directly characterizes the distribution and frequency of DNA modification, facilitating a better understanding of its modification mechanism that can be potentially extended to label DNAs in different species.

Synthesis and properties of PI composite films using carbon quantum dots as fillers

Polyimide (PI) is widely used in the field of microelectronics because of its excellent thermal, mechanical, optical, and electrical properties. With the development of electronics and information industry, PI as a dielectric material needs to possess low dielectric loss. PI/carbon quantum dots (PI/CQDs) composite films with low dielectric loss were prepared by introducing CQDs into PI matrix. At 25°C and 1 kHz voltage, the dielectric loss of pure PI film is about 0.0057. The dielectric loss of PI/CQDs composite film is about 0.0018, which is about 68% lower than that of pure PI film. The dielectric loss of PI/CQD composite film is greatly reduced while the mechanical properties and thermal properties of PI/CQDs composite film roughly remain unchanged. Due to the cross-linking structure formed between CQDs and PI molecular chain, the relative movement of PI molecular chain is hindered.

Organic–Inorganic Double-Gel System Thermally Insulating and Hydrophobic Polyimide Aerogel

Aerogel materials are used in various fields, but there is a shortage of aerogel materials with an excellent combination of mechanical properties, thermal stability, and easy preparation. In this study, polyimide aerogel materials with superior mechanical properties, thermal stability, and low thermal conductivity were prepared by forming a double-gel system in the liquid phase. The amino-modified gel, prepared by coating SiO₂ nano-microspheres with GO through a modified sol-gel method (SiO₂@GO-NH₂), was subsequently homogeneously dispersed with PAA wet gel in water to form a double-gel system. The construction of a double-gel system enabled the PI aerogel to shape a unique honeycomb porous structure and a multi-layered interface of PI/SiO₂/GO. The final obtained PI aerogel possessed effective thermal conductivity (0.0309 W/m·K) and a high specific modulus (46.19 m²/s²). In addition, the high thermal stability (543.80 °C in Ar atmosphere) and the ability to retain properties under heat treatment proved its durability in high thermal environments. The hydrophobicity (131.55°) proves its resistance to water from the environment. The excellent performance of this PI aerogel and its durability in thermal working environments make it possible to be applied in varied industrial and research fields, such as construction and energy, where heat and thermal insulation are required.

Raman spectroelectrochemical study of poly(N-methylaniline) at UV, blue, red, and NIR laser line excitations in solutions of different pH

A detailed study on Raman spectroelectrochemistry of poly(N-methylaniline) (PNMA) layer deposited at a gold electrode was performed. Raman spectra were excited by four different laser wavelengths: UV line at 325 nm, a blue line at 442 nm, a red line at 633 nm, and a NIR line at 785 nm in solutions of different pH ranging from 1 to 9, and at different electrode potentials ranging from -0.5 V to 0.8 V. UV excitation reveals features characteristic for the reduced form of PNMA, even within the electrochemical potential range where oxidized forms of this polymer prevail. At a blue laser excitation, again, features of the reduced form are revealed, along with indications on the appearance of some kind of intermediate redox state within a definite potential window. Both red and NIR laser line excitations result in rich Raman features, disclosing all major redox forms as well as their interconversions by changing of electrode potential. The presence of polaronic form of PNMA even in pH-neutral and alkaline solutions has been disclosed. A detailed analysis of Raman vibrational bands is presented for different excitation wavelengths, different electrode potentials, and different solution acidities.

A state-of-the-art review on the nanomaterial-based sensor for detection of venlafaxine

Venlafaxine (denoted as VFX), a member of the most extensively prescribed antidepressants, is used to handle major depressive disorder, panic disorder and anxiety. This medication affects brain chemistry, which could cause an imbalance in depressed people. VFX and its metabolites, on the other hand, are pollutants in the water environment. Through movement and transformation in several procedures like adsorption, photolysis, hydrolysis and biodegradation, they have harmed living creatures, resulting in the enhancement of diverse active chemicals found in the environment. As a result, determining VFX at modest concentrations with excellent sensitivity, specificity and repeatability are critical. To quantify VFX, various analytical methodologies have been developed. Electroanalytical processes, on the other hand, have piqued interest because of their superior benefits over traditional techniques such as speed, sensitivity, directness and affordability. Subsequently, the purpose of this article is to show how to determine VFX electrochemically using a wide range of electrodes, including CPE, GCE, MCE, SPE, PGE and ISE.

Optimization of the Rheological Properties of Self-Assembled Tripeptide/Alginate/Cellulose Hydrogels for 3D Printing

3D printing is an emerging and powerful technique to create shape-defined three-dimensional structures for tissue engineering applications. Herein, different alginate-cellulose formulations were optimized to be used as printable inks. Alginate (Alg) was chosen as the main component of the scaffold due to its tunable mechanical properties, rapid gelation, and non-toxicity, whereas microcrystalline cellulose (MCC) was added to the hydrogel to modulate its mechanical properties for printing. Additionally, Fmoc-FFY (Fmoc: 9-fluorenylmethoxycarbonyl; F: phenylalanine; Y: tyrosine), a self-assembled peptide that promotes cell adhesion was incorporated into the ink without modifying its rheological properties and shear-thinning behavior. Then, 3D-printed scaffolds made of Alg, 40% of MCC inks and Fmoc-FFY peptide were characterized by scanning electron microscopy and infrared spectroscopy, confirming the morphological microstructure of the hydrogel scaffolds with edged particles of MCC homogeneously distributed within the alginate matrix and the self-assembly of the peptide in a β-sheet conformation. Finally, the cytocompatibility of the scaffolds was tested in contact with the MG63 osteosarcoma cells, confirming the absence of cytotoxic components that may compromise their viability. Interestingly, MG63 cell growth was retarded in the scaffolds containing the peptide, but cells were more likely to promote adhesive interactions with the material rather than with the other cells, indicating the benefits of the peptide in promoting biological functionality to alginate-based biomaterials.

Lightweight and anisotropic cellulose nanofibril/rectorite composite sponges for efficient dye adsorption and selective separation

Constructing lightweight and porous adsorbents which can effectively remove dye contaminants is of great significance in the field of the sewage treatment. In this work, anisotropic cellulose nanofibril (CNF) composite sponges assisted by rectorites are fabricated through directional freeze-drying. The resulted composite sponge exhibits the superior saturated adsorption capacity and removal efficiency of 120.0 mg/g and 96.1% for methylene blue (MB), respectively, which is better than the pure CNF sponge and rectorite powders. This is attributed to the strong electrostatic interaction between CNFs and MB, and good cation exchange property of rectorites inside the three-dimensional (3D) highly porous composite sponge. The MB adsorption process of the composite sponge fits to the pseudo-second-order kinetic model and the Langmuir isotherm model well, which is affected by both boundary layer and intraparticle diffusion, resulting in a theoretical maximum adsorption capacity of 214.6 mg/g. Moreover, it also possesses a selective adsorption capacity for anionic and cationic dyes, which is expected to realize the separation treatment of different dyes according to actual application requirements.

Nanocomposites based on the graphene family for food packaging: historical perspective, preparation methods, and properties

Nanotechnology experienced a great technological advance after the discovery of the graphene family (graphene – Gr, graphene oxide – GO, and reduced graphene oxide-rGO). Based on the excellent properties of these materials, it is possible to develop novel polymeric nanocomposites for several applications in our daily routine. One of the most prominent applications is for food packaging, offering nanocomposites with improved thermal, mechanical, anti-microbial, and barrier properties against gas and water vapor. This paper reviewed food packaging from its inception to the present day, with the development of more resistant and intelligent packaging. Herein, the most common combinations of polymeric matrices (derived from non-renewable and renewable sources) with Gr, GO, and rGO and their typical preparation methods are presented. Besides, the interactions present in these nanocomposites will be discussed in detail, and their final properties will be thoroughly analyzed as a function of the preparation technique and graphene family-matrix combinations.

Food packaging based on nanotechnology of polymeric nanocomposites of graphene and graphene oxide results in packaging with better thermal, mechanical, antimicrobial, electrical packaging, moisture barrier and gas properties.

Plant extract-based green fabrication of nickel ferrite (NiFe2O4) nanoparticles: An operative platform for non-enzymatic determination of pentachlorophenol

Environmental pollution has become a major human concern with the extensive exploitation of pesticides. Pentachlorophenol (PCP) is the most hazardous of all chlorophenols which are being used as pesticide, fungicide, and wood preservative. Thus, the fabrication of ultrasensitive electrochemical methods for the determination of pesticides is of great significance. In the present experiment, a simple, green, and sensitive electrochemical sensor was constructed for the determination of PCP by using a chemically modified nickel ferrite glassy carbon electrode (NiFe₂O₄/GCE). The fabricated nanoparticles were primarily characterized by several analytical tools to confirm the functionalities, surface texture, crystallinity, and elemental composition. For the investigation of conductive nature, the proposed NiFe₂O₄/GCE was exploited to the primary electrochemical characterization tools e.g. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The ultra-sensitive determination of PCP was carried out under the linear dynamic range from 0.01 to 90 μM at the pulse amplitude of 80 mV/s in BRB buffer pH of 4. The limit of detection of the developed methods for PCP was calculated to be 0.0016 μM. The analytical applicability of the fabricated sensor was tested in different water samples depicting the acceptable recovery values.