Photocatalytic degradation of highly toxic dyes using chitosan-g-poly(acrylamide)/ZnS in presence of solar irradiation

Sustainable chitosan-based materials as heterogeneous catalyst for application in wastewater treatment and water purification: An up-to-date review

Water pollution is one of serious environmental issues due to the rapid development of industrial and agricultural sectors, and clean water resources have been receiving increasing attention. Recently, more and more studies have witnessed significant development of catalysts (metal oxides, metal sulfides, metal-organic frameworks, zero-valent metal, etc.) for wastewater treatment and water purification. Sustainable and clean catalysts immobilized into chitosan-based materials (Cat@CSbMs) are considered one of the most appealing subclasses of functional materials due to their high catalytic activity, high adsorption capacities, non-toxicity and relative stability. This review provides a summary of various upgrading renewable Cat@CSbMs (such as cocatalyst, photocatalyst, and Fenton-like reagent, etc.). As for engineering applications, further researches of Cat@CSbMs should focus on treating complex wastewater containing both heavy metals and organic pollutants, as well as developing continuous flow treatment methods for industrial wastewater using Cat@CSbMs. In conclusion, this review abridges the gap between different approaches for upgrading renewable and clean Cat@CSbMs and their future applications. This will contribute to the development of cleaner and sustainable Cat@CSbMs for wastewater treatment and water purification.

Acidified groundnut cake for enhanced bio adsorption of anionic textile dye Reactive Red 195

This study focuses on the improvement of bioremediation of textile dye Reactive Red 195 using agro-industrial waste, groundnut oil cake (GNOC) obtained after oil-pressing. The treatment of GNOC with 1 N H2SO4 had resulted in physiochemical changes on the insoluble porous adsorbent, which improved their adsorption efficiency. The dye removal efficiency increased from 55% to 94% on acidification of GNOC. The raw groundnut oil cake (RGNOC) and acid-treated groundnut oil cake (AGNOC) were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction, and zeta potential. The rate and efficiency of dye adsorption were examined using adsorption kinetics and isotherm models. The results confirm that acid-treated GNOC eliminates impurities, alter the surface functional groups, and significantly increase porous surface areas of RGNOC. The investigation of key factors such as contact time, initial concentration of dye, static/agitation impact, particle size, and adsorbent dose had significantly influenced adsorption capacity of GNOC. Adsorption of dye fits best into the Langmuir model and equilibrium data of dye on AGNOC was explained by psuedo-second-order reaction with maximum adsorption capacity of 12.65 mg/g. This emphasis AGNOC has a very excellent potential to remove the textile dye Reactive Red dye from industrial effluent.

Efficient removal of oxytetracycline antibiotic from aqueous media using UV/g-C3N4/Fe3O4 photocatalytic process

Residual pharmaceuticals in the environment are a class of emerging pollutants that endanger human health. Tetracycline's family, including oxytetracycline (OTC), are known as one of the most produced and consumed antibiotics worldwide. The g-C3N4/Fe3O4 nanocomposite with high level of catalytic efficiency features suitable performance in water/wastewater treatment. Therefore, in the present study, this nanocomposite was applied to remove the oxytetracycline from the aqueous environment. In this research study, g-C3N4/Fe3O4 nanocomposite (serving as catalyst) was initially synthesized by a simple hydrothermal method. The effect of key operating parameters such as initial solution pH, dose of catalyst, contact time and initial concentration of OTC in aqueous solutions was investigated under UV irradiation. In addition, COD and TOC tests, the kinetics and the effect of radical scavengers on the applied photocatalytic process were all evaluated. The maximum removal efficiency of OTC (99.8 %) was achieved under the following conditions: neutral solution pH 7; catalyst dose, 0.7 g/L; and an initial OTC concentration of 5 mg/L. The data showed that the kinetics of the reaction followed the first-order model with R2 of 0.9755. The respective COD and TOC efficiency values for the applied photocatalytic process were determined to be 87 and 59 %, respectively. In addition, the lowest removal efficiency of OTC was observed in the presence of tert-butanol radical scavengers, and OH radicals played a main role. The UV/g-C3N4/Fe3O4 photocatalytic process proved to be highly efficient for the removal of OTC antibiotic and could be potentially applied for the removal of other pollutants from aqueous solutions.

Synthesis and characterization of novel guar gum based waste material derived nanocomposite for effective removal of hexabromocyclododecane and lindane

Herein, efficient degradation of hexabromocyclododecane (HBCD) and Lindane, a persistent organic pollutant using guar gum based calcium oxide doped silicon dioxide (GG-CaO@SiO2) has been reported. The nanocomposite was prepared by waste egg shell (CaO) and rice husk (SiO2) was well characterized. The maximum degradation of HBCD and Lindane were observed at 8 mg catalyst loading, neutral pH, and 2 mg L-1 of pollutant amount. The photocatalytic performance of GG-CaO@SiO2 for HBCD and Lindane photodegradation was evaluated, and it was found that the rate constant increased in the order of GG-CaO@SiO2 > CaO@SiO2 > GG. The polymeric GG-CaO@SiO2 nanocomposite showed maximum removal of both pollutants due to higher surface area (70 m2 g-1) and synergistic interactions among GG moieties. It achieved HBCD and Lindane elimination rates of 94 % and 90 % by photo-adsorptive degradation within 150 min. Meanwhile, the leaching of HBCD from expanded polystyrene (EPS) materials (0.14 ± 0.05 ppm) underwater with different time intervals and degradation of leachate HBCD were also assessed. The eradication of the pollutant manifested first-order kinetics, with the Langmuir adsorption. LC-MS analysis confirmed that GG-CaO@SiO2 effectively breaks down complex structure toxic pollutants into safer metabolites under natural sunlight exposure. The polymeric GG-CaO@SiO2 nanocomposite showed notable reusability up to ten cycle promotes sustainability.

A review on versatile applications of biomaterial/polycationic chitosan: An insight into the structure-property relationship

Chitosan is a versatile and generous biopolymer obtained by alkaline deacetylation of naturally occurring chitin, the second most abundant biopolymer after cellulose. The excellent physicochemical properties of polycationic chitosan are attributed to the presence of varied functional groups such as amino, hydroxyl, and acetamido groups enabling researchers to tailor the structure and properties of chitosan by different methods such as crosslinking, grafting, copolymerization, composites, and molecular imprinting techniques. The prepared derivatives have diverse applications in the food industry, water treatment, cosmetics, pharmaceuticals, agriculture, textiles, and biomedical applications. In this review, numerous applications of chitosan and its derivatives in various fields have been discussed in detail with an insight into their structure-property relationship. This review article concludes and explains the chitosan's biocompatibility and efficiency that has been done so far with future usage and applications as well. Moreover, the possible mechanism of chitosan's activity towards several emerging fields such as energy storage, biodegradable packaging, photocatalysis, biorefinery, and environmental bioremediation are also discussed. Overall, this comprehensive review discusses the science and complete information behind chitosan's wonder function to improve our understanding which is much needful as well as will pave the way towards a sustainable future.

A combined experimental and modeling approach to elucidate the adsorption mechanism for sustainable water treatment via In2S3-anchored chitosan

A novel Chitosan/Indium sulfide (CS/In2S3) nanocomposite was created by co-precipitating Chitosan and InCl3 in solution, resulting in In2S3 agglomeration on the Chitosan matrix with a remarkable pore diameter of 170.384 Å, and characterized it for the physical and chemical properties. Under optimal conditions (pH = 7, time = 60 min, catalyst dosage = 0.24 g L-1, and dye concentration = 100 mg L-1), the synthesized nanocomposite demonstrated remarkable adsorption capabilities for Victoria Blue (VB), attaining a removal efficiency of 90.81%. The Sips adsorption isotherm best matched the adsorption process, which followed pseudo-second-order kinetics. With a rate constant of 6.357 × 10-3 g mg-1 min-1, the highest adsorption capacity (qm) was found to be 683.34 mg g-1. Statistical physics modeling (SPM) of the adsorption process revealed multi-interaction and multi-molecular adsorption of VB on the CS/In2S3 surface. The nanocomposite demonstrated improved stability and recyclability, indicating the possibility for low-cost, reusable wastewater dye removal adsorbents. These results have the potential to have practical applications in environmental remediation.

Effect of metal ion on optical, photoluminescence, morphological, and photocatalytic properties of ZnS nanoparticles

The semiconducting materials of pure zinc sulfide (ZnS), 2.5 wt%, 5.0 wt%, 7.5 wt%, and 10 wt% of Ag-doped ZnS nanoparticles were prepared using the sol-gel technique. The prepared nanoparticles were analyzed by powder X-ray diffraction (PXRD), Fourier transformed infrared (FTIR), UV-visible absorption, diffuse reflectance photoluminescence (PL), high-resolution transmission electron microscope (HRTEM), and field emission scanning electron microscope (FESEM) to study the properties of pure ZnS and Ag-doped ZnS nanoparticles (NPs). The Ag-doped ZnS nanoparticles have a polycrystalline nature, which is confirmed by PXRD analysis. The functional groups were identified by the FTIR technique. The bandgap values decrease with increasing Ag concentration compared to pure ZnS NPs. The crystal size lies between 12 and 41 nm for pure ZnS and Ag-doped ZnS NPs. The presence of Zn, S, and Ag elements was confirmed by EDS analysis. Using methylene blue (MB), the photocatalytic activity of pure ZnS and Ag-doped ZnS NPs was performed. The highest degradation efficiency was observed for 7.5 wt% Ag-doped ZnS NPs.

Progressive yield of nickel cobaltite nanocubes for visible light utilization and degrading activities of methyl orange dye pollutant

In this study, pure cobalt oxide (Co₃O₄) as well as nickel cobaltite (NiCo₂O₄) were investigated with their capacity of degradation efficiency for textile dyes like methyl orange (MO) employing visible light irradiation. Two variable concentrations of nickel cobaltite (NiCo₂O₄) with 75:25 and 50:50 wt ratios along with the pure metal oxides were synthesized by thermal decomposition method and analyzed by various sophisticated instruments. Initially, the structural characteristics described the fine crystalline nature of NiCo₂O₄ and also exhibits reduced size than the pure component material (Co₃O₄). Besides, NiCo₂O₄ catalysts represented nano cubic shaped particles, and also their coordinating functional groups were evaluated. Further, the absorption wavelength confirms the two band positions of NiCo₂O₄ which leads to promote visible light absorption, and degrading efficiency of about 47.5% for NiCo₂O₄ (75:25) sample compared with NiCo₂O₄ (50:50) which produced only 26.3% degradation. This higher efficiency of the former was due to high crystallinity and interfacial charge transfer of combined Ni²⁺, Ni³⁺, Co²⁺ and Co³⁺ redox couples. This consecutively produces effective OH radicals that brought the degradation effectively under visible light. The recycling capacity up to 5 repeated cycles has been studied with the NiCo₂O₄ (75:25) and therefore the catalyst can further be used in other dye degradation.

Facile synthesis of biopolymer decorated magnetic coreshells for enhanced removal of xenobiotic azo dyes through experimental modelling

Since contamination of xenobiotics in water bodies has become a global issue, their removal is gaining ample attention lately. In the present study, nZVI was synthesized using chitosan for removal of two such xenobitic dyes, Bromocresol green and (BCG) and Brilliant blue (BB), which have high prevalence in freshwater and wastewater matrices. nZVI functionalization prevents nanoparticle aggregation and oxidation, enhancing the removal of BCG and BB with an efficiency of 84.96% and 86.21%, respectively. XRD, FESEM, EDS, and FTIR have been employed to investigate the morphology, elemental composition, and functional groups of chitosan-modified nanoscale-zerovalent iron (CS@nZVI). RSM-CCD model was utilized to assess the combined effect of five independent variables and determine the best condition for maximum dye removal. The interactions between adsorbent dose (2-4 mg), pH (4-8), time (20-40 min), temperature (35-65 0C), and initial dye concentration (40-60 mg/L) was modeled to study the response, i.e., dye removal percentage. The reaction fitted well with Langmuir isotherm and pseudo-first-order kinetics, with a maximum qe value of 426.97 and 452.4 mg/g for BCG and BB, respectively. Thermodynamic analysis revealed the adsorption was spontaneous, and endothermic in nature. Moreover, CS@nZVI could be used up to five cycles of dye removal with remarkable potential for real water samples.

Superior removal of methylene blue using green fabricated pomegranate peel/nano-hematite composite: reusability, isotherm and kinetics study

Green hematite nanoparticles were synthesized using pomegranate peel extract of different concentrations (2 g, 4 g, and 6 g) and in the presence of the peel residuals. The obtained products defined as PP/GNH (I), PP/GNH (II), and PP/GNH (III) referring to the hematite nanoparticles at different concentrations compositing with pomegranate peel residuals. The products were addressed as green adsorbents for methylene blue dye contaminants in water. They exhibit superior adsorption properties with theoretical q_max of 666, 1111, and 909 mg/g for PP/GNH (I), PP/GNH (II), and PP/GNH (III), respectively. The equilibration times were attained after 480 min for the three products. The isotherm and kinetic studies indicate that the adsorption systems for the synthetic materials are of chemisorption type. The adsorption behaviors of these systems can be demonstrated according to Pseudo-second order as well as Elovich kinetic model. Furthermore, the adsorption results reflected a mono-layer uptake form which was more suitable for the Langmuir model than other investigated models. The products also showed high performances when it comes to remove the dyes investigated such as methylene blue Congo red, safranin, methyl orange, and crystal violet. Finally, green fabricated nano hematite/pomegranate peel composites are of high stability and can be reused for five cycles.Communicated by Ramaswamy H. Sarma.

Methylene Blue Removed from Aqueous Solution by Encapsulation of Bentonite Aerogel Beads with Cobalt Alginate

It can be difficult to remove dark methylene blue (MB) from water effectively. The use of sodium alginate and bentonite (Ben) as the matrix produced a displacement reaction that occurred in cobalt chloride, which allowed Ben to be successfully encapsulated in cobalt alginate (CA). Finally, a vacuum freeze-drying method was used to prepare a low-cost composite of CA/Ben aerogel for adsorbing MB in aqueous solutions. In addition to scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy, the composites were also characterized and analyzed. Different adsorption experiments were conducted in order to determine the effects of dosage, pH, adsorption time, and temperature on the adsorption performance of the adsorbent. According to the results of the experiment, the adsorption capacity of CA/Ben aerogel was 258.92 mg·g^-1, and the pseudo-first-order kinetic model and Freundlich isotherm model can fully explain the adsorption process of MB on this aerogel. The composite material reported in this paper is easily recycled, and the removal rate reaches 65% after four times of recycling. Moreover, compared with other adsorbents, the composite material of the invention is highly environmentally friendly and has a simple preparation process. A large-scale application of this technology is the removal of dyes from water on a large scale.

Accurate data prediction by fuzzy inference model for adsorption of hazardous azo dyes by novel algal doped magnetic chitosan bionanocomposite

A bionanocomposite comprising of magnetic chitosan doped with algae isolated from native habitat was fabricated and utilized as an efficient adsorbent for the removal of hazardous azo dyes, namely, Direct Red 31 (DR31) and Direct Red 28 (DR28). The algal doped magnetic chitosan (Alg@mCS) was comprehensively characterized by Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Analysis (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction analysis (XRD), and Brunauer-Emmett-Teller (BET). On the sorption of dyes, the influence of various process variables such as pH, adsorbent dosage, contact time, temperature, and initial dyes concentration were addressed. The adsorbent demonstrated maximal removal of DR31 and DR28 at pH 5 and 3, respectively. The maximum adsorption capacity of DR31 and DR28 was observed at Alg@mCS dose of 0.6 g L^-1 and 7 g L^-1 in 10 and 20 min, respectively. The Redlich Peterson isotherm model was shown to be appropriate for dye adsorption, indicating monolayer coverage of the dyes on the adsorbent surface (R² > 0.99). The adsorption process followed pseudo-second-order kinetics (R² > 0.99). Based on 320 experimental datasets from batch studies and interpolated data, adaptive neuro-fuzzy inference system (ANFIS) models were utilized to estimate dye elimination (percent). A number of parameters were calculated to validate the model's applicability. The Alg@mCS was proven to be a useful adsorbent for eliminating toxic and harmful azo dyes from aqueous solutions.

Mn3O4@ZnO Hybrid Material: An Excellent Photocatalyst for the Degradation of Synthetic Dyes including Methylene Blue, Methyl Orange and Malachite Green

In this study, we synthesized hybrid systems based on manganese oxide@zinc oxide (Mn₃O₄@ZnO), using sol gel and hydrothermal methods. The hybrid materials exhibited hierarchical morphologies and structures characterized by the hexagonal phase of ZnO and the tetragonal phase of Mn₃O₄. The hybrid materials were tested for degradation of methylene blue (MB), methyl orange (MO), and malachite green (MG) under ultraviolet (UV) light illumination. The aim of this work was to observe the effect of various amounts of Mn₃O₄ in enhancing the photocatalytic properties of ZnO-based hybrid structures towards the degradation of MB, MO and MG. The ZnO photocatalyst showed better performance with an increasing amount of Mn₃O₄, and the degradation efficiency for the hybrid material containing the maximum amount of Mn₃O₄ was found to be 94.59%, 89.99%, and 97.40% for MB, MO and MG, respectively. The improvement in the performance of hybrid materials can be attributed to the high charge separation rate of electron-hole pairs, the co-catalytic role, the large number of catalytic sites, and the synergy for the production of high quantities of oxidizing radicals. The performance obtained from the various Mn₃O₄@ZnO hybrid materials suggest that Mn₃O₄ can be considered an effective co-catalyst for a wide range of photocatalytic materials such as titanium dioxide, tin oxide, and carbon-based materials, in developing practical hybrid photocatalysts for the degradation of dyes and for wastewater treatment.

Photocatalytic remediation of methylene blue and antibacterial activity study using Schiff base-Cu complexes

This work describes the design of novel Cu(II) complexes and their application in the photocatalytic degradation of methylene blue (MB). The same photocatalyst exhibits antibacterial activity against Escherichia coli (gram-negative) and Bacillus circulans (gram-positive). The characterisation of the photocatalysts has been done by several up-to-date physical methods. The rationale behind the photocatalysts' beneficial intervention is discussed in this study. Statistical analysis of the degradation of MB is done using a one-way ANOVA, and the significance of means is determined by a multiple comparison test using Turkey HSD. Also, the degradation of MB follows pseudo first-order kinetics with high correlation coefficient values (R² > 0.95), making them useful as simple and low-cost organic dye degradation agents.

Solar-Energy-Driven Cu-ZnO/TiO2 Nanocomposite Photocatalyst for the Rapid Degradation of Congo Red Azo Dye

This study effectively demonstrates the sonochemical synthesis of visible-light-responsive Cu-ZnO/TiO2 ternary Z-scheme heterojunction nanocomposite photocatalyst. The as-prepared photocatalyst was comprehensively characterized by techniques including high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray analysis (EDX) and elemental dot mapping, X-ray diffraction (XRD), UV-Vis-diffuse reflectance spectroscopy (UV-Vis-DRS), Brunauer–Emmett–Teller (BET) surface area, and Fourier-transform infrared spectroscopy (FTIR). The photocatalytic activity of the Cu-ZnO/TiO2 nanocomposite photocatalyst was assessed for the degradation of Congo red (CR), an azo dye, under direct sunlight. The pseudo-first-order rate constant for CR degradation was found to be 0.09 min−1. The outcome implies that the synthesised nanocomposite photocatalyst demonstrates excellent photocatalytic activity under direct sunlight as 98% degradation of CR dye was achieved in approximately 20 min using the Cu-ZnO/TiO2 nanocomposite photocatalyst. Furthermore, its high recoverability and reusability of five times indicate its excellent catalytic potential.

A high-performance microreactor integrated with chitosan/ Bi2WO6/CNT/TiO2 nanofibers for adsorptive/photocatalytic removal of cephalexin from aqueous solution

A Z-scheme Bi₂WO₆/CNT/TiO₂ photocatalyst was synthesized hydrothermally and loaded on chitosan nanofibers with different mass percentages using the electrospinning process. The batch adsorption experiments for chitosan nanofibrous samples containing Bi₂WO₆/CNT/TiO₂ revealed that the adsorption process and its kinetic followed the Langmuir isotherm and pseudo-second-order model, respectively. A planar microreactor with a reusable plate-type configuration was fabricated employing an inexpensive micromachining technique and integrated with chitosan/Bi₂WO₆/CNT/TiO₂ nanofibers. The synergistic effect of the adsorption and photocatalysis was assessed for removing cephalexin under simulated sunlight irradiation in a continuous flow microreactor. The nanofibers containing 15 wt% of Bi₂WO₆/CNT/TiO₂ exhibited the most removal efficiency. The effects of operational variables were investigated in the microreactor and optimized using response surface methodology as light intensity = 17.45 W/m², retention time = 256 s, pH = 4.8, and initial cephalexin concentration = 29 mg/L. At this condition, cephalexin and TOC removal efficiencies reached 99.2% and 92.4%, respectively. The kinetic of disappearance of cephalexin under optimal conditions followed the Langmuir-Hinshelwood model. The adsorption equilibrium constant deduced from this model was similar to that one calculated from the Langmuir isotherm model. At the optimum condition, cephalexin removal efficiency reduced to 80% after 1500 min of microreactor operation and the nanofibers revealed appropriate stability and reusability.

Fast and effective catalytic degradation of an organic dye by eco-friendly capped ZnS and Mn-doped ZnS nanocrystals

Undoped and manganese doped ZnS nanocrystals encapsulated with thioglycolic acid (ZnS-TGA) were synthesized and characterized with different techniques, and finally tested in the photodegradation of a methyl orange in aqueous solution under UV and sunlight irradiations. FTIR and X-ray diffraction results confirmed the functionalization of these nanocrystal surface by thioglycolic acid and the formation of crystalline structures of ZnS and Mn-doped ZnS with cubic and hexagonal phases. Calculated average size of ZnS nanocrystals was in the range of 2-3 nm. It was observed a blue shift of the absorbance threshold and the estimated bandgap energies were higher than that of Bulk ZnS thus confirming the quantum confinement effect of charge carriers. Photoluminescence spectra of ZnS nanocrystals exhibited emission in the range of 410-490 nm and the appearance of an additional emission band around 580 nm (2.13 eV) connected to the ⁴T₁ → ⁶A₁ transition of the Mn²⁺ions. Photodegradation of methylene orange with undoped and Mn-doped ZnS-TGA nanocrystals was investigated. Dye adsorption prior to photocatalysis using nanocrystals was studied via kinetic and equilibrium experiments. The maximum dye adsorption capacity on doped ZnS-TGA was ~ 26.98 mg/g. The adsorption kinetic was found to follow the pseudo-second-order kinetic model. A statistical physics model was used to analyze the equilibrium data where the calculated adsorption energy was 17-18 kJ/mol. It was concluded that the dye adsorption was associated to the hydrogen interaction where the removal process was feasible and multi-molecular at 25 °C. The photocatalytic activity of undoped ZnS nanoparticles under UV irradiation showed better efficiency than doped nanocrystals thus indicating that manganese doping generated a dropping of the photocatalytic degradation of the dye. Dye degradation efficiency of 81.37% using ZnS-TGA nanocrystals was achieved after 6 min, which indicated that ZnMnS-TGA nanocrystals may be considered an alternative low cost and environmental friendly material for facing water pollution caused by organic compounds via photodegradation processes.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

Synthesis and characterization of chitosan-supported Fe2O3 nanohybrids for rapid sonophotocatalytic degradation of 2,4,6-trichlorophenol

The present study reports the design of heterogeneous photocatalytic system using Fe₂O₃ with chitosan (CS) as a matrix for the sonophotocatalytic degradation of 2,4,6-trichlorophenol (2,4,6-TCP). CS was chosen as a polymer matrix as it is abundant in nature, eco-friendly, and can be easily processed into microparticles, nanofibers, as well as nanoparticles and shows the tendency of adhesion towards a vast range of solid substrates besides serving as a chelating agent toward metallic oxides. The nanohybrids were characterized via Fourier transformation infrared spectrum (FT-IR), X-ray diffraction (XRD), scanning electron microscopy coupled with electron dispersive spectrum (SEM-EDS), thermogravimetric analysis (TGA), and UV-visible diffuse reflectance (UV-Vis-DRS) analyses. Infrared spectroscopy (IR) studies confirmed synergistic interaction between Fe₂O₃ and CS. The XRD measurements confirmed the crystalline morphology while SEM revealed formation of rod-like structures. The TGA studies confirmed higher thermal stability of CS/Fe₂O₃ as compared to pure CS. The optical band gap for CS and CS/Fe₂O₃ was calculated to be 3 eV and 2.25 eV, respectively, from diffuse reflectance spectral (DRS) studies. Rapid photocatalytic degradation of 2,4,6-TCP was observed under UV light irradiation in presence of CS and CS/Fe₂O₃ nanohybrids which revealed 83.19% and 95.20% degradation within a short span of 60 min. The degraded fragments were identified using liquid chromatography-mass spectrometry (LC-MS). The present study on the development of ecofriendly nanohybrid photocatalyst is expected to provide experimental basis for the future development of CS-based photocatalysts which can be easily processed into membranes/filters for the industrial scale degradation of toxic organic pollutants.

Synthesis of gum tragacanth-grafted pentapolymer hydrogels for As(III) exclusion: Roles of microwaves, RSM optimization, and DFT studies

Microwave assisted homogeneous heating, selectivity in radical formation, and the faster polymerization facilitate the synthesis, structures, properties, and the higher branching associated stability of multifunctional multipolymers. Thus, the optimum gum tragacanth (GMTR)-grafted pentapolymer hydrogel/ HG2 was synthesized from three monomers, i.e., cis-butenedioic acid (cBDA), N-hydroxymethylacryalamide (NHMAm), and 2-(methacryloyloxy)ethanol (MAOE), and in situ generated 2-(3-((hydroxymethyl)amino)-3-oxopropoxy)ethyl-2-methylbutanoate (CM1) and 2-hydroxyethyl 3-(N-(hydroxymethyl)-2-methylbutanamido)-2-methylpropanoate (CM2) comonomers through microwave assisted facile polymerization in aqueous medium. Here, twenty-one GMTR-grafted-[cBDA-co-CM1-co-NHMAm-co-CM2-co-MAOE/ HG1] hydrogels were prepared by using variable amounts of synthesis parameters, of which the optimum HG2 was chosen for the scale-up repetitive As(III)-exclusion. RSM was used to measure the optimum power-temperature-time of microwave irradiation. The structures of HG1, HG2, and As(III)-adsorbed HG2/ As(III)-HG2, in situ anchored comonomers, GMTR-grafting, reusability, thermostability, and surface phenomena were comprehended by XPS, NMR, UV-vis, FTIR, TG, XRD, DLS, and SEM analyses; pH_PZC; network parameters; and thermodynamic variables. The geometries, electronic structures, and variable coordinations of As(III) with HG2 were investigated through DFT studies of HG2 and As(OH)₃-HG2. The highest exclusion efficiency of 25 mg HG2 within 5-100 mg L^-1 As(III) and at 298 K was 192.91 mg g^-1, which was significantly higher than that of HG1.

Photocatalytic performance of chitosan tethered magnetic Fe2O3-like (3D/2D) hybrid for the dynamic removal of anionic dyes: Degradation and mechanistic pathways

Efficient photocatalysis methods with a production of less number of toxic intermediates are extremely advantageous for water decontamination. The degradation efficiency, specific surface area, stability and porosity will be improving by wrapping of Fe₂O₃ using appropriate biopolymers. In this work, Fe₂O₃ reinforced chitosan (Fe₂O₃@CS) nanocomposite was fabricated using co-precipitation method. The chitosan makes available its surface for the useful generation of the nanocomposite. These wrapping of Fe₂O₃ on chitosan provides synergistically improved properties that could be attributed to the elevated partition efficiency and faster transfer of the photo-generated charge carriers, which was substantiated by the experimental outcomes from photoluminescence and ESR spectroscopy. The results obtained from DRS analysis entail the reduction in band gap of Fe₂O₃@CS (2.52 eV) as compared with 3.52 eV of Fe₂O₃. The results indicated that 89.2% and 94.6% were the maximum degradations correspondingly for MO and OG. The trapping investigation emphasized the involvement of OH radicals in the degradation of dyes over Fe₂O₃@CS composites. The five cycles of regeneration experiment recommended the superior photostability of the fabricated Fe₂O₃@CS composite. This work proposed a practical arrangement and subsequent influence of an advanced photocatalyst for the useful remediation dyes from contaminated water without causing any secondary pollution.

Photocatalytic Degradation of Alizarin Red S, Amaranth, Congo Red, and Rhodamine B Dyes Using UV Light Modified Reactor and ZnO, TiO2, and SnO2 as Catalyst

The photocatalytic degradation of dyes (alizarin red S, amaranth, congo red, and rhodamine B) present in wastewater was performed with UV lamp. The catalysts employed for this investigation were ZnO, TiO2, and SnO2. The kinetic studies of dyes degradation followed first order reaction. ZnO was found to be most efficient photo-catalyst for degrading these dyes. The optimal result for alizarin red S was k = 0.2118 min−1, t1/2 = 3.27 min, and R2 = 0.7998, for amaranth was k = 0.146 min−1, t1/2 = 4.74 min, and R2 = 0.8348, for congo red was k = 0.2452 min−1, t1/2 = 2.8 min, and R2 = 0.8382, and for rhodamine B was k = 0.1915 min−1, t1/2 = 3.6 min, and R2 = 0.76.

Developing the Ternary ZnO Doped MoS2 Nanostructures Grafted on CNT and Reduced Graphene Oxide (RGO) for Photocatalytic Degradation of Aniline

Transition metal sulfide semiconductors have achieved significant attention in the field of photocatalysis and degradation of pollutants. MoS2 with a two dimensional (2D) layered structure, a narrow bandgap and the ability of getting excited while being exposed to visible light, has demonstrated great potential in visible-light-driven photocatalysts. However, it possesses fast-paced recombination of charges. In this study, the coupled MoS2 nanosheets were synthesized with ZnO nanorods to develop the heterojunctions photocatalyst in order to obtain superior photoactivity. The charge transfer in this composite is not adequate to achieve desirable activity. Therefore, heterojunction was modified by reduced graphene oxide (RGO) nanosheets and carbon nanotubes (CNTs) to develop the RGO/ZnO/MoS2 and CNTs/ZnO/MoS2 ternary nanocomposites. The structure, morphology, composition, optical and photocatalytic properties of the as-fabricated samples were characterized through X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray (EDX), elemental mapping, Photoluminescence (PL), Ultraviolet-Visible spectroscopy (UV-VIS), and Brunauer-Emmett-Teller (BET) techniques. The photo-catalytic performance of all samples was evaluated through photodegradation of aniline in aqueous solution. The combination of RGO or CNTs into the ZnO/MoS2 greatly promoted the catalytic activity. However, the resulting RGO/ZnO/MoS2 ternary nanocomposites showed appreciably increased catalytic performance, faster than that of CNTs/ZnO/MoS2. Charge carrier transfer studies, the BET surface area analysis, and the optical studies confirmed this superiority. The role of operational variables namely, solution pH, catalyst dosage amount, and initial concentration of aniline was then investigated for obtaining maximum degradation. Complete degradation was observed, in the case of pH = 4, catalyst dosage of 0.7 g/L and aniline concentration of 80 ppm, and light intensity of 100 W. According to the results of trapping experiments, hydroxyl radical was found to be the main active species in the photocatalytic reaction. Meanwhile, a plausible mechanism was proposed for describing the degradation of aniline upon ternary composite. Moreover, the catalyst showed excellent reusability and stability after five consecutive cycles due to the synergistic effect between its components. Total-Organic-Carbon concentration (TOC) results suggested that complete mineralization of aniline occurred after 210 min of irradiation. Finally, a real petrochemical wastewater sample was evaluated for testing the catalytic ability of the as-fabricated composites in real case studies and it was observed that the process successfully quenched 100% and 93% of Chemical Oxygen Demand (COD) and TOC in the wastewater, respectively.

Oxidized chitosan modified electrospun scaffolds for controllable release of acyclovir

Developing a novel scaffold carrier with a sustained and controllable release profile of drug is essential to promote the effective transdermal delivery for acyclovir (ACY). In this work, electrospun polyacrylonitrile nanofibers (PAN NFs) was chemically modified with oxidized chitosan (OC). The modified fibrous scaffold was further loaded with the ACY for drug released investigation. FT-IR and NMR results revealed that the conversion of the functional group for each step has successfully occurred on the surface of the fibers. Through the in-vitro drug release and kinetic study, it demonstrated that ACY could be sustainably and controlled released from the OC modified scaffold following the Korsmeyer-Peppas model with a Fickian diffusion mechanism. The human adipose-derived stem cells and the blood combability evaluation confirmed the obtained scaffold possessed excellent cell biocompatibility and hemocompatibility. It could be concluded that the resultant OC modified scaffold based on electrospun PAN NFs opened a new potential option for the topical/transdermal drug delivery of ACY.

Effective removal of anionic textile dyes using adsorbent synthesized from coffee waste

Adsorption of Reactive Black 5 and Congo Red from aqueous solution by coffee waste modified with polyethylenimine was investigated. The removal percentages of both dyes increased with amount of polyethyleneimine in the modified adsorbent. Characterization revealed that polyethyleneimine modification improved the adsorbent surface chemistry, while slight improvement of adsorbent textural properties was also observed. The adsorbent's excellent performance was demonstrated by high removal percentages towards the anionic dyes in most experimental runs. The modelling result showed that anionic dyes adsorption occurred via monolayer adsorption, and chemisorption was the rate-controlling step. The adsorbent possesses higher maximum adsorption capacity towards Reactive Black 5 (77.52 mg/g) than Congo Red (34.36 mg/g), due to the higher number of functional groups in Reactive Black 5 that interact with the adsorbent. This study reveals the potential of adsorbent derived from coffee waste in textile wastewater treatment. Furthermore, surface chemistry modification is proven as an effective strategy to enhance the performance of biowaste-derived adsorbents.

Treated residue from aluminium lamination as adsorbent of toxic reactive dyes - a kinetic, equilibrium and thermodynamic study

The residue generated in the aluminium cold lamination (TTR) was submitted to a direct burning and then it was calcined at 500°C. BET, FTIR, SEM with EDX and TGA techniques were performed to characterize the adsorbent before and after the adsorption. BET analysis showed that TTR specific surface area was 55.37 m² g^-1 and there were no significant changes after the adsorptive process. Afterwards, the TTR was applied as adsorbent of the reactive Drimaren Blue (DB), Drimaren Red (DR) and Drimaren Gold (DG). Its employment consists in a sustainable alternative for the treatment of textile wastewater, once the TTR was used as low-cost adsorbent of textile dyes. Kinetic studies showed that the process reached the equilibrium state between 5 and 10 min. The pseudo-second-order model better fitted the adsorption kinetics, with kinetic rate constants 10.51, 34.71 and 31.51 mg min g^-1 for DB, DR and DG respectively. The equilibrium experiments were performed to obtain the adsorption parameters for each dye; moreover, the maximum adsorption capacity was 6.27, 0.42 and 1.23 mg g^-1 for DB, DR and DG, respectively. Thermodynamics studies allowed to obtain the values of enthalpy for DB, DR and DG, -7.90, 14.03 and -17.75 kJ mol^-1, respectively. Furthermore, the negative values of Gibbs free energy confirmed the spontaneity of the adsorption. The results point to the physisorption characteristic of the process, in which the temperature negatively influenced the adsorption for the DB and DG; the opposite result was observed for the DR.

Removal and enrichment of Cr(VI) from aqueous solutions by lotus seed pods

Chromium (Cr(VI)) is highly toxic and carcinogenic. Cr(VI) water pollution has become more and more serious. This article reports on a study in which lotus seed pods (LSP), an agricultural waste product, was used to efficiently remove Cr(VI) from an aqueous solution, and the carbonization product of LSP after the removal of Cr(VI) (CPLSP) can be regarded as a resource containing Cr. Cr(VI) removed by LSP fits a pseudo-second-order model. pH levels greatly influence the amount of Cr removed. The maximum removal of Cr(VI) by LSP in aqueous solution was 153.85 mg/g. The possible removal mechanism is absorption, redox, and reabsorption based upon SEM/EDS, FT-IR, and XPS spectra results. The Cr content of CPLSP was 42.95% by ammonium persulfate oxidation titrimetric method. These results suggest that LSP can be an excellent, low cost, biomaterial for removing and enriching Cr(VI) from an aqueous solution. PRACTITIONER POINTS: Lotus seed pods are an efficient adsorbent for Cr(VI) from aqueous solutions. The Cr removal by lotus seed pods occurs via absorption, redox, and reabsorption. Cr can be captured after the pods are carbonized. Lotus seed pods can be applied to the removal and enrichment of Cr(VI) from waste water.

Iron Oxide/Chitosan Magnetic Nanocomposite Immobilized Manganese Peroxidase for Decolorization of Textile Wastewater

Because of its effectiveness in organic pollutant degradation, manganese peroxidase (MnP) enzyme has attracted significant attention in recent years regarding its use for wastewater treatment. Herein, MnP was extracted from Anthracophyllum discolor fungi and immobilized on the surface of magnetic nanocomposite Fe3O4/chitosan. The prepared nanocomposite offered a high surface area for MnP immobilization. The influence of several environmental factors like temperature, pH, as well as storage duration on the activity of the extracted enzyme has been studied. Fourier transmission infrared spectroscopy (FT-IR), scanning electron microscope (SEM), X-ray diffraction (XRD), and transmission electron microscope (TEM) techniques were used for the characterization of the prepared MnP/Fe3O4/chitosan nanocomposite. The efficiencies of the prepared MnP/Fe3O4/chitosan nanocomposite for the elimination of reactive orange 16 (RO 16) and methylene blue (MB) industrial dyes were determined. According to the results, the immobilization of MnP on Fe3O4/chitosan nanocomposite increases its capacity to decolorize MB and RO 16. This nanocomposite allowed the removal of 96% ± 2% and 98% ± 2% of MB and RO 16, respectively. The reusability of the synthesized nanocomposite was studied for five successive cycles showing the ability to retain its efficiency even after five cycles. Thus, the prepared MnP/Fe3O4/chitosan nanocomposite has potential to be a promising material for textile wastewater bioremediation.