Phytoextract mediated ZnO/MgO nanocomposites for photocatalytic and antibacterial activities

Eco-inspired synthesis of MgO-infused g-C3N4 nanocomposites from tulsi seeds for advanced photocatalytic environmental remediation

This study introduces a novel approach to synthesizing magnesium oxide (MgO) nanoparticles through the use of Ocimum sanctum (tulsi seed) extract combined with the thermal polymerization of MgO-doped graphitic carbon nitride (MgCN) nanocomposites. The nanocomposites were prepared at varying MgO concentrations (0.5 mM, 1.0 mM, 1.5 mM, and 2.0 mM) to optimize their properties. Comprehensive characterization of the synthesized MgO nanoparticles and MgCN nanocomposites was conducted using advanced analytical techniques, including UV-Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray mapping (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The MgCN nanocomposite with 1.5 mM MgO demonstrated a high surface area of 98.287 m2 g-1, as determined by Brunauer-Emmett-Teller (BET) analysis. X-ray photoelectron spectroscopy (XPS) confirmed the presence of carbon and nitrogen elements, validating the integration of MgO into the nanocomposite matrix. High-resolution transmission electron microscopy (HRTEM) images depicted planar, stacked, and wrinkled structures characteristic of a graphitic-like material. Consistent with a Z-scheme heterojunction, the MgCN (1.5 mM) sample exhibited an enhanced morphology, increased surface area, improved visible light absorption, and reduced band gap. This particular nanocomposite displayed remarkable adsorption and photocatalytic degradation capabilities, achieving up to 98% removal of methylene blue and 54% removal of tetracycline antibiotics. Furthermore, it showed significant antibacterial activity against Escherichia coli. Notably, the MgCN (1.5 mM) nanocomposite maintained its performance over four cycles, underscoring its potential for sustained application in wastewater treatment and the elimination of organic contaminants. The scavenging activity of the nanocomposites was also explored, revealing additional environmental benefits. This research highlights a promising pathway for developing eco-friendly nanocomposites with robust capabilities in water purification and pollution control.

Bioengineered sustainable phytofabrication of anatase TiO2 -adorned g-C3N4 nanocomposites and unveiling their photocatalytic potential towards advanced environmental remediation

The ecologically friendly properties, low-cost, and readily available titanium dioxide (TiO2) materials have made them a subject of considerable interest for numerous promising applications. Anatase TiO2 nanoparticles were synthesized in the current study through the utilization of a hibiscus leaf extract and the advent of TiO2-doped g-C3N4(TiCN) nanocomposites (varying 0.5 mM, 1.0 mM, 1.5 mM, and 2.0 mM) by thermal polymerization. Here, the proposed study utilized multiple analytical techniques, including UV-Vis spectroscopy, a diffraction pattern (XRD), SEM coupled with EDX analysis, TGA, and EPR, to characterize the as-prepared TiO2 nanoparticles and TiCN nanocomposites. BET analysis the adsorption-desorption isotherms of the TiCN(1.5 mM) nanocomposite, the surface area of the prepared nanocomposite is 112.287 m2/g, and the pore size is 7.056 nm. The XPS spectra support the development of the TiCN(1.5 mM) nanocomposite by demonstrating the presence of C and N elements in the nanocomposite in addition to TiO2. HRTEM images where the formation of stacked that indicates a planar, wrinkled graphitic-like structure is clearly visible. The TiCN (1.5 mM) specimen exhibited enhanced morphology, enhanced surface area, greater capacity to take in visible light, and lowered band gap when compared to g-C3N4 following z-scheme heterojunction. The sample denoted as TiCN (1.5 mM) exhibited superior performance in terms of adsorption and photocatalytic activity using rhodamine B and Bisphenol A. Furthermore, the TiCN (1.5 mM) composite exhibited satisfactory stability over four cyclic runs, indicating its potential application in minimizing the impact of organic wastewater contaminants when compared to g-C3N4.

Green synthesis of silver doped zinc oxide/magnesium oxide nanocomposite for waste water treatment and examination of their cytotoxicity properties

This research attempted to prepare silver-doped zinc oxide/magnesium oxide nanocomposite (Ag-doped ZnO/MgO-NCP) using Mentha pulegium plant extract. The synthesized NCP was investigated by X-ray diffraction analysis (XRD), Fourier Transform Infrared (FT-IR), Field Emission Scanning Electron Microscope (FESEM), Energy dispersive X-ray spectroscopy (EDX), Mapping, and UV-Visible analyses. The XRD data displayed cubic crystal structures for silver & magnesium oxide and a hexagonal framework for zinc oxide. Also, FESEM and PSA images of NCP pointed out, that the average size of the spherical morphology is about 10-16 nm, while the analysis of EDX confirmed the attendance of Zn, Mg, Ag, and O elements. Under UVA light, we tested the photocatalytic activity of NCP to the degradation of Methylene blue (MB) and Rhodamine B (RhB) dyes in various temperatures (400, 500, and 600 °C). The results of the photocatalytic test displayed that the degradation percentage of MB dye in pH = 9, nanocomposite amount ∼30 mg, and dye concentration ∼1 × 10 -5 M was about 98 %. We also evaluated the cytotoxicity of nanocomposite on cancer CT-26 cell line through the MTT method and obtained an IC50 value of 250 μg/mL.

Design and Fabrication of Biomass Derived Black Carbon Modified g-C3N4/FeIn2S4 Heterojunction as Highly Efficient Photocatalyst for Wastewater Treatment

The environmental deterioration caused by dye wastewater discharge has received considerable attention in recent decades. One of the most promising approaches to addressing the aforementioned environmental issue is the development of photocatalysts with high solar energy consumption efficiency for the treatment of dye-contaminated water. In this study, a novel low-cost π-π biomass-derived black carbon modified g-C3N4 coupled FeIn2S4 composite (i.e., FeInS/BC-CN) photocatalyst is successfully designed and fabricated that reveals significantly improved photocatalytic performance for the degradation of Eosin Yellow (EY) dye in aqueous solution. Under dark and subsequent visible light irradiation, the amount optimized composite reveals 99% removal performance for EY dye, almost three-fold compared to that of the pristine FeInS and BC-CN counterparts. Further, it is confirmed by means of the electron spin resonance spectrometry, quenching experiments, and density functional theory (DFT) calculations, that the hydroxyl radicals (•OH) and superoxide radicals (•O2 -) are the dominant oxidation species involved in the degradation process of EY dye. In addition, a systematic photocatalytic degradation route is proposed based on the resultant degradation intermediates detectedduring liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis. This work provides an innovative idea for the development of advanced photocatalysts to mitigate water pollution.

Temperature-dependent heterojunction ternary nanocomposite: Assessing photocatalytic and antibacterial applications

Heterojunction nanocomposites (ZnO:NiO:CuO) were synthesized via a hydrothermal method and annealed at three different temperatures (400 °C, 600 °C, and 800 °C). The structural, optical, and electrical properties were examined by employing XRD, SEM, UV-Vis, FTIR, and LCR meter techniques to investigate the effects of annealing. Increasing the annealing temperature resulted in the nanocomposites (NCPs) exhibiting enhanced crystallinity, purity, optical properties, and improved electrical and dielectric behavior. The calculated crystalline sizes (Debye-Scherrer method) of the NCPs were determined to be 21, 26 and 34 nm for annealing temperature 400 °C, 600 °C, and 800 °C, respectively. The calculated bandgaps of synthesized samples were found in the range of 2.92-2.55 eV. This temperature-dependent annealing process notably influenced particle size, morphology, band-gap characteristics, and photocatalytic efficiency. EDX analysis affirmed the sample purity, with elemental peaks of Zn, Cu, Ni, and O. These NCPs demonstrated exceptional photocatalytic activity against various dyes solutions (Methyl orange (MO), Methylene Blue (MB), and mixed solution of dyes) under sunlight and also showed good antibacterial properties assessed by the disc diffusion method. Notably, the nanocomposite annealed at 400 °C exhibited a particularly high degradation efficiency by degrading 96% MB and 91% MO in just 90 min under sunlight.

Photocatalytic Degradation of Organic Pollutants-Nile Blue, Methylene Blue, and Bentazon Herbicide-Using NiO-ZnO Nanocomposite

Water pollution poses a significant threat to both human health and ecosystem integrity. Chemical pollutants such as dyes and pesticides affect the water quality and endanger aquatic life. Among the methods for water purification from organic pollutants, photodegradation is certainly a valid technique to decrease such contaminants. In this work, pristine NiO, ZnO, and NiO-ZnO photocatalysts were synthesized by the homogeneous co-precipitation method. X-ray diffraction confirms the formation of a photocatalyst consisting of ZnO (Hexagonal) and NiO (Cubic) structures. The crystalline size was calculated by the Scherrer formula, which is 19 nm for the NiO-ZnO photocatalyst. The band gap measurements of the prepared samples were obtained using the Tauc Plot, equation which is 2.93 eV, 3.35 eV and 2.63 eV for NiO, ZnO, and NiO-ZnO photocatalysts, respectively. The photocatalytic performance of NiO-ZnO nanocomposite was evaluated through the degradation of Methylene Blue and Nile Blue dyes under sunlight, and Bentazon herbicide under a UV light. Photocatalyst degradation efficiency was 95% and 97% for Methylene Blue and Nile Blue in 220 min under sunlight while a degradation of 70% for Bentazon after 100 min under UV light source was found.

Electrospun PAN/PEG Nanofibrous Membrane Embedded with a MgO/gC3N4 Nanocomposite for Effective Bone Regeneration

Developing biomaterial scaffolds using tissue engineering with physical and chemical surface modification processes can improve the bioactivity and biocompatibility of the materials. The appropriate substrate and site for cell attachment are crucial in cell behavior and biological activities. Therefore, the study aims to develop a conventional electrospun nanofibrous biomaterial using reproducible surface topography, which offers beneficial effects on the cell activities of bone cells. The bioactive MgO/gC3N4 was incorporated on PAN/PEG and fabricated into a nanofibrous membrane using electrospinning. The nanocomposite uniformly distributed on the PAN/PEG nanofiber helps to increase the number of induced pores and reduce the hydrophobicity of PAN. The physiochemical characterization of prepared nanoparticles and nanofibers was carried out using FTIR, X-ray diffraction (XRD), thermogravimetry analysis (TGA), X-ray photoelectron spectroscopy (XPS), and water contact angle measurements. SEM and TEM analyses examined the nanofibrous morphology and the structure of MgO/gC3N4. In vitro studies such as on ALP activity demonstrated the membrane's ability to regenerate new bone and healing capacity. Furthermore, alizarin red staining showed the increasing ability of the cell-cell interaction and calcium content for tissue regeneration. The cytotoxicity of the prepared membrane was about 97.09% of live THP-1 cells on the surface of the MgO/gC3N4@PAN/PEG membrane evaluated using MTT dye staining. The soil burial degradation analysis exhibited that the maximum degradation occurs on the 45th day because of microbial activity. In vitro PBS degradation was observed on the 15th day after the bulk hydrolysis mechanism. Hence, on the basis of the study outcomes, we affirm that the MgO/gC3N4@PAN/PEG nanofibrous membrane can act as a potential bone regenerative substrate.

Fabrication of ternary metal oxide (ZnO:NiO:CuO) nanocomposite heterojunctions for enhanced photocatalytic and antibacterial applications

In this article, ZnO:NiO:CuO nanocomposites (NCPs) were synthesized using a hydrothermal method, with different Zn : Ni : Cu molar ratios (1 : 1 : 1, 2 : 1 : 1, 1 : 2 : 1, and 1 : 1 : 1). The PXRD confirmed the formation of a NCP consisting of ZnO (hexagonal), NiO (cubic), and CuO (monoclinic) structures. The crystallite sizes of NCPs were calculated using Debye Scherrer and Williamson-Hall methods. The calculated crystalline sizes (Scherrer method) of the NCPs were determined to be 21, 27, 23, and 20 nm for the molar ratios 1 : 1 : 1, 2 : 1 : 1, 1 : 2 : 1, and 1 : 1 : 2, respectively. FTIR spectra confirmed the successful formation of heterojunction NCPs via the presence of metal-oxygen bonds. The UV-vis spectroscopy was used to calculate the bandgap of synthesized samples and was found in the range of 2.99-2.17 eV. SEM images showed the mixed morphology of NCPs i.e., irregular spherical and rod-like structures. The dielectric properties, including AC conductivity, dielectric constant, impedance, and dielectric loss parameters were measured using an LCR meter. The DC electrical measurements revealed that NCPs have a high electrical conductivity. All the NCPs were evaluated for the photocatalytic degradation of Methylene blue (MB), methyl orange (MO), and a mixture of both of these dyes. The NCPs with a molar ratio 1 : 1 : 2 (Zn : Ni : Cu) displayed outstanding photocatalytic activity under sunlight, achieving the degradation efficiency of 98% for methylene blue (MB), 92% for methyl orange (MO) and more than 87% in the case of a mixture of dyes within just 90 minutes of illumination. The antibacterial activity results showed the more noxious nature of NCPs against Gram-negative bacteria with a maximum zone of inhibition revealed by the NCPs of molar ratio 1 : 2 : 1 (Zn : Ni : Cu). On the basis of these observations, it can be anticipated that the NCPs can be successfully employed for the purification of contaminated water by the degradation of hazardous organic compounds and in antibacterial ointments.

A highly efficient NiCo2O4 decorated g-C3N4 nanocomposite for screen-printed carbon electrode based electrochemical sensing and adsorptive removal of fast green dye

Herein, we demonstrate the preparation and application of NiCo2O4 decorated over a g-C3N4-based novel nanocomposite (NiCo2O4@g-C3N4). The prepared material was well characterized through several physicochemical techniques, including FT-IR, XRD, SEM, and TEM. The electrochemical characterizations via electrochemical impedance spectroscopy show the low electron transfer resistance of NiCo2O4@g-C3N4 owing to the successful incorporation of NiCo2O4 nanoparticles on the sheets of g-C3N4. NiCo2O4@g-C3N4 nanocomposite was employed in the fabrication of a screen-printed carbon electrode-based innovative electrochemical sensing platform and the adsorptive removal of a food dye, i.e., fast green FCF dye (FGD). The electrochemical oxidation of FGD at the developed NiCo2O4@g-C3N4 nanocomposite modified screen-printed carbon electrode (NiCo2O4@g-C3N4/SPCE) was observed at an oxidation potential of 0.65 V. A wide dual calibration range for electrochemical determination of FGD was successfully established at the prepared sensing platform, showing an excellent LOD of 0.13 µM and sensitivity of 0.6912 µA.µM-1.cm-2 through differential pulse voltammetry. Further, adsorbent dose, pH, contact time, and temperature were optimized to study the adsorption phenomena. The adsorption thermodynamics, isotherm, and kinetics were also investigated for efficient removal of FGD at NiCo2O4@g-C3N4-based adsorbents. The adsorption phenomenon of FGD on NiCo2O4@g-C3N4 was best fitted (R2 = 0.99) with the Langmuir and Henry model, and the corresponding value of Langmuir adsorption efficiency (qm) was 3.72 mg/g for the removal of FGD. The reaction kinetics for adsorption phenomenon were observed to be pseudo-second order. The sensitive analysis of FGD in a real sample was also studied.

Eco-friendly phytofabrication of Ficus Benjamina L. based ZnO-doped g-C3N4 nanocomposites for remarkable photocatalysis and antibacterial applications

The research reported here emphasizes the phytoextract route synthesized ZnO-doped g-C3N4 (GCN) for its photocatalytic activity, which helps to ensure a sustained & healthy environment. The leaf extract solution of Ficus Benjamina L. was used for the synthesis of ZnO nanoparticles, and GCN was prepared via urea using a thermal polymerization process. The flower extract functions as both stabilizers and capping agents during the process of synthesis of ZnO nanoparticles. The synthesized nanocomposites were then calcined at 400 °C and were further characterized with spectroscopy (UV-Vis), diffracted pattern (XRD), and infrared spectroscopy (FTIR). Further, the photocatalytic activity of auramine orange (AO) and methylene blue (MB) dye from phytoextract route synthesized pure ZnO NPs, GCN-Pure, and composites with varied millimolar concentrations of ZnO nanoparticles with GCN of the constant amount was checked. After the complete analysis, it was observed that the series that was prepared of ZnO-GCN nanocomposites showed notable enhancement in the degradation pattern of the methylene blue dye. Apparently, 1.5 mmol (mM) ZnO-GCN presented greater degradation patterns for Auramine orange and Methylene blue dye as compared to other nanocomposites that were synthesized. The observed increased photocatalytic activity has a conceivable explanation. The antibacterial activity studies of the prepared nanocomposites were also performed against the E. coli strain showing an enhanced zone of inhibition towards it.

Architecting the Z-scheme heterojunction of Gd2O3/g-C3N4 nanocomposites for enhanced visible-light-induced photoactivity towards organic pollutants degradation

A basic calcination process in one step was employed to create g-C3N4 photocatalytic composites modified by Gd2O3 nanoparticles. SEM (scanning electron microscopy), FTIR (Fourier-transform infrared spectroscopy), XRD (X-ray diffraction), EIS (electrochemical impedance spectroscopy), PL (photoluminescence studies) as well as TEM (transmission electron microscopy), XPS (X-ray photoelectron spectroscopy), and CV (cyclic voltammetry) were employed to explain the structural traits, optical properties, and morphological features of the processed photocatalyst. The findings show that Gd2O3 (Gd) does not affect the sample's crystalline structure but rather increases g-C3N4 surface area by spreading it superficially. Furthermore, Gd can redshift the light absorption peak, reduce the energy gap, and improve the efficiency with which photogenerated holes and electrons are removed in g-C3N4. The surface morphology of g-C3N4, in particular, could be significantly enhanced. We similarly employed three distinct photocatalytic complexes of Gd2O3 and g-C3N4 in 1:1, 2:1, and 3:1 proportions to degrade methylene blue (MB). After 100 min in visible light (400-800 nm), the photodegradation rate of composites is 58.8% for 1:1 (GG1), 94.5% for 2:1 (GG2), and 92% for 3:1 (GG3). In addition to the MB dye, the photocatalytic activity of synthesized materials was also studied for methyl orange. The result shows phenomenal degradation values, i.e.; for GG1 86%, GG2 96%, and for GG3 84.6%. The narrow band gap that separates the photogenerated electron and hole enhances g-C3N4 ability to degrade photo-catalytically. From the result, we concluded that the photocurrent and cyclic photocatalytic degradation of methylene blue shows that a composition of 2:1 Gd2O3/g-C3N4 has high photocatalytic stability.

Photocatalytic dye degradation and antibacterial activities of CeO2/g-C3N4 nanomaterials for environmental applications

The uncontrolled dumping of synthetic dyes into water sources has posed severe hazards to the ecosystem. For decades, several materials with low cost and high efficiency have been investigated for dye degradation. Photocatalytic degradation is regarded as a successful strategy since it utilizes sunlight to transform harmful pollutants into nontoxic compounds without using oxidative agents. The photocatalytic potentials of CeO2/g-C3N4 (CG) were investigated in this work using a simplistic ultrasonication process. Here, the amount of CeO2 was fixed, and g-C3N4 was varied in the ratio (1:x, where x = 1, 2, and 3) and abbreviated as CG1, CG2, and CG3. Characterization techniques such as Fourier transforms-infrared spectroscopy, thermal gravimetric analysis (TGA), powdered X-ray diffraction, ultraviolet-visible spectroscopy, etc. were used to characterize structural analysis, optical properties, particle size, and chemical bonds of the prepared nanocomposites. The photocatalytic results showed that CG2 effectively degraded rose bengal (RB) and crystal violet (CV) dyes when exposed to visible light irradiation as compared to pure GCN and CeO2. The antibacterial activity analysis further supported the potential application of prepared photocatalyst as a disinfectant agent against both gram-positive (Staphylococcus aureus and Bacillus cereus) and gram-negative (Salmonella abony and Escherichia coli) pathogenic strains of bacteria.

Antifungal action and targeted mechanism of Bio fabricated zinc oxide (ZnO) nanoparticles against Ascochytafabae

The current work focuses on analysing the structural, optical, and anti-fungal efficacy of ZnO nanoparticles using well diffusion agar methods and minimum inhibitory concentration (MIC). ZnO nanoparticles were created using the sol gel method. To check the synthesized material's spatial and optical characteristics, XRD, UV, and RAMAN studies were performed. The median diameter of produced nanostructures is in the region of nanometre, according to XRD measurements. Results from Raman Spectroscopy for the nanostructure are provided, together with comparisons to current development theory and reliable experimental data. The band gap of the zinc oxide sample is found by graphing (h) 2versus input photon energy and gradually decreasing the linear component of the (h) 2 to zero. The band gap energy is expressed by the line's intersection with the energy axis. Calculations show that the energy band gap is 3.22eV.The fungus Ascochytafabae is in control of the Phaseolus vulgaris L. (beans) blight disease. It mostly affects the plant's stem, leaves, and fruits. Phaseolus vulgaris plant leaf with Ascochytafabae infection was isolated, and ZnO nanoparticle effects were observed. It emerged that the synthesized ZnO nanoparticles were highly efficient against Ascochytafabae. By using the well diffusion method and an absolute concentration of ZnO nanoparticles, the maximum inhibitory concentration was 15.0 ± 0.2 mm.

Ppy/TiO2-SiO2 nanohybrid series: synthesis, characterization, photocatalytic activity, and antimicrobial potentiality

A series of polypyrrole doped TiO₂-SiO₂ nanohybrids (Ppy/TS NHs) were synthesized thru in-situ oxidation polymerization by varying weight ratio of pyrrole. The structural analysis of NHs were characterized by X-ray Diffraction (XRD) spectra, UV-visible (UV-Vis) spectra and X-ray Photoelectron spectra (XPS) confirmed synthesis of nanomaterials. Surface and morphological study done by adopting, Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Transmittance Electron Microscopy (TEM) and Brunauer-Emmett-Teller (BET) analysis confirmed the homogenous distribution, nano range size formation and mesoporous nature of nanohybrids. Further, electrochemical behavior of synthesized NHs investigated by adopting Electrochemical Impedance Spectroscopy (EIS) showed good kinetic behaviour and electron transport tendency. The nanohybrids and precursors were examined for photocatalytic degradation of methylene blue (MB) dye and revealed enhanced degradation tendency for the NHs series photocatalysts. It was found that variation of pyrrole (0.1 to 0.3 g) to TS nanocomposites (TS Nc) increased the photocatalytic potential of TS Nc. The maximum photodegradation efficacy was found to be 90.48% in 120 min for Ppy/TS0.2 NHs under direct solar light. Additionally, Ppy/TS0.2 NHs performed appreciably towards antibacterial studies against some Gram-positive and Gram-negative deleterious bacteria, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Shigella flexneri microbes.

Recent progress on plant extract-mediated biosynthesis of ZnO-based nanocatalysts for environmental remediation: Challenges and future outlooks

The plant extract mediated green synthesis of nanomaterials has attracts enormous interest due to its cost-effectiveness, greener, and environmentally friendly. It is also considered as an alternative and facile method in which the phytochemicals can be used as a natural capping and reducing agents and helped to produce nanomaterials with high surface area, different sizes, and shapes. One of the materials fabricated using green methods is zinc oxide (ZnO) semiconductor due to its enormous applications in different field areas. In this review, an overview of recent progress on green synthesized ZnO-based catalysts and various modification methods for the purpose of enhancing the catalytic activity of ZnO and the corresponding structural-activity and interactions towards the removal of pollutants are highlighted. Particularly, the plant extract mediated ZnO-based photocatalysts application for the removal of pollutants via photocatalytic degradation, reduction reaction, and adsorption mechanism are demonstrated. Besides, the opportunities, challenges, and future outlooks of ZnO-based materials for environmental remediation with green and sustainable methods are also included. We believe that this review is a timely and comprehensive review on the recent progress related to plant extract mediated ZnO-based nanocatalysts synthesis and applications for environmental remediation.

Synthesis of phytoextract-mediated Ag-doped graphitic carbon nitride (Ag@GCN) for photocatalytic degradation of dyes

The present work focuses on the green synthesis of Ag-doped graphitic carbon nitride (Ag@GCN) for photocatalytic activities, which can contribute to a more sustainable environment. The leaf extract of the Ocimum tenuiflorum (Tulsi) plant was used to prepare the silver nanoparticles, as the plant extract serves as a stabilizing and capping agent in producing silver nanoparticles. Both Ag nanoparticles and urea-derived GCN were synthesized by thermal polymerization. The Ag-doped GCN nanocomposites were synthesized using various millimolar concentrations of Ag nanoparticles (NPs) with a fixed amount of GCN. The green nanocomposites (NCs) were synthesized by calcinating leaf extract at about 550 °C. They were then characterized for surface morphology by SEM coupled with energy-dispersive X-ray spectroscopy (EDX), and elemental composition by XRD, Fourier-dispersive infrared spectroscopy (FTIR), and transmission electron microscope (TEM). Thermal stability and estimation of the Ag content in GCN were done through thermogravimetric analysis. The prepared series of nanocomposites (Ag-doped GCN 0.5 mM, 1.0 mM, 1.5 mM, 2.0 mM) were used to study the photocatalytic degradation efficiency of rose bengal (RB) and xylenol orange (XO) dyes. The degradation efficiency of dyes gets enhanced due to the doping of Ag nanoparticles into GCN. The efficiency increased from 54 to 76% and 15 to 36% in the case of RB and XO dyes, respectively. The apparent rate constant value increased up to 2.5 times in the case of the Ag-doped GCN (1.5 mM) nanocomposite in comparison to GCN. The result obtained from the study confirmed that Ag-doped GCN (1.5 mM) could act as a potential photocatalyst for wastewater remediation applications.

The photocatalytic, cytotoxicity, and antibacterial properties of zinc oxide nanoparticles synthesized using Trigonella foenum-graecum L extract

In this study, the manufacture of zinc oxide nanoparticles (ZnO-NPs) was completed via the sol-gel method with Trigonella foenum-graecum L extract for the first time to function as the stabilizing and reducing agent. The obtained product was investigated by various analyzing procedures such as TGA/DTG, FT-IR, UV-Vis, XRD, and EDX/FESEM. The calcination of our product was conducted at temperatures of 400, 500, and 600 °C. In conformity to the XRD pattern, heightening the temperature of calcination caused an enlargement in the size of nanoparticles. The photocatalytic performance of ZnO-NPs was evaluated to degrade methylene blue and Eriochrome black T (EBT) dyes under UV light, which resulted in a degradation percentage of about 96% and 94%, after 90 min, respectively. There has been some evidence suggesting that the green synthesis of ZnO-NPs has increased their use in medicine. The outcomes of examining the cytotoxicity effect of this product against the Huh-7 cell line by the performance of the MTT assay were indicative of an IC₅₀ of around 62.5 µg/mL. Finally, according to the results of the broth microdilution method, which was performed to assess the antibacterial activity of ZnO-NPs towards gram-positive and gram-negative bacteria, the value of MIC was in the range of 31 to 125 µg/mL. The obtained results from biological studies confirm the antibacterial and anticancer properties of ZnO-NPs, which are promising for applying NPs in medical fields.

Optical and biological properties of MgO/ZnO nanocomposite derived via eggshell membrane: a bio-waste approach

A novel synthesis of MgO/ZnO nanocomposite using a template, namely an eggshell membrane (ESM) was attempted. The nanocomposite was characterized by XRD, UV-visible, FTIR, Raman, DLS (zeta potential and particle size distribution), FESEM with EDX, and HRTEM analysis. The presence of periclase cubic MgO (space group Fm3m) and hexagonal wurtzite ZnO (space group P63mc) structures was verified by the XRD results. The average crystallite size of the MgO/ZnO nanocomposite was equal to 9.43 nm. The nanocomposite exhibited an on-set of absorbance close to 300 nm. From the taucs plot, the bandgap of the composite was calculated, and it was equal to 3.63 eV. The FTIR spectrum of the composite showed Mg-O stretching vibration at 455 cm^-1 and that of Zn-O at 564 cm^-1. The zeta potential and the particle size distribution of the nanocomposite were equal to - 35.5 mV and 176.1 nm. The FESEM images of the nanocomposite appeared as an aggregated honeycomb with a cubic and hexagonal structure. The EDX analysis showed the presence of Mg (23.65 atom%), Zn (27.95 atom%), and O (48.40 atom%). The antibacterial and antifungal activities of the nanocomposite were investigated using the agar-well diffusion method. The antibacterial activity exhibited the highest zone of inhibition for Bacillus subtilis (25 ± 0.41 mm) and Shigella dysenteria (25 ± 0.19 mm), whereas the antifungal activity showed the highest zone of inhibition for Aspergillus terrus (27 ± 0.25 mm). The MIC value of the nanocomposite was equal to 9.37 (µg/mL) for all the bacteria. Hence, it is verified that the present MgO/ZnO nanocomposite could very well be used to treat bacterial and fungal infections.

Rapid fabrication of MgO@g-C3N4 heterojunctions for photocatalytic nitric oxide removal

Nitric oxide (NO) is an air pollutant impacting the environment, human health, and other biotas. Among the technologies to treat NO pollution, photocatalytic oxidation under visible light is considered an effective means. This study describes photocatalytic oxidation to degrade NO under visible light with the support of a photocatalyst. MgO@g-C3N4 heterojunction photocatalysts were synthesized by one-step pyrolysis of MgO and urea at 550 °C for two hours. The photocatalytic NO removal efficiency of the MgO@g-C3N4 heterojunctions was significantly improved and reached a maximum value of 75.4% under visible light irradiation. Differential reflectance spectroscopy (DRS) was used to determine the optical properties and bandgap energies of the material. The bandgap of the material decreases with increasing amounts of MgO. The photoluminescence spectra indicate that the recombination of electron-hole pairs is hindered by doping MgO onto g-C3N4. Also, NO conversion, DeNOx index, apparent quantum efficiency, trapping tests, and electron spin resonance measurements were carried out to understand the photocatalytic mechanism of the materials. The high reusability of the MgO@g-C3N4 heterojunction was shown by a five-cycle recycling test. This study provides a simple way to synthesize photocatalytic heterojunction materials with high reusability and the potential of heterojunction photocatalysts in the field of environmental remediation.

Biogenic Synthesis, Characterization, and Photocatalytic Evaluation of Pristine and Graphene-Loaded Zn50Mg50O Nanocomposites for Organic Dyes Removal

Algal biomass synthesised nanocomposites have a higher surface area and reusability advantages. This study aimed to synthesise and characterise ZnMgO and silica-supported graphene with ZnMgO (G-ZnMgO) nanocomposites from Kappaphycusalvarezii and evaluate their potential in the application of photocatalysis to remove Rhodamine-B (RhB) and methylene blue (MB) dyes from their aqueous medium by maximising the percentage removal using response surface methodology (RSM) modelling. Nanocomposites were synthesised and characterised by biogenic and instrumental (Powder X-ray diffraction (P-XRD), electron microscopic analysis (SEM and TEM), Fourier transform infrared spectroscopy (FTIR), Energy dispersive analysis of X-rays (EDAX). and UV-visible diffuse reflectance spectroscopy (UV-DRS)) methods, respectively; modelling predicted the optimal conditions to be photocatalyst dosage and contact time of 1 g/L and 90 min, respectively, to obtain maximum MB dye removal of 80% using G-ZnMgO. The results showed the best fit between experimental and RSM predicted values. Thus, the obtained results conclude that the algal biomass synthesised nanocomposites were found to be one of the potential photocatalysts for the removal of RhB and MB dyes from their aqueous solution.

Enhanced Bactericidal Action of rGO-ZnO Hybrids Prepared by the One-Pot Co-precipitation Approach

Metal-based antimicrobials have the potential to profile sustainable solutions to infection care and health. In this study, we report the synthesis of rGO-ZnO hybrid nanostructures by a simple co-precipitation approach with various mass ratios of GO, and their antimicrobial potential was assessed. The structural analysis confirms the presence of a hexagonal wurtzite structure with peak shifting in hybrid nanostructures and increases in crystallite size (11-24 nm). Raman spectra revealed GO doping in the D band (1350 cm-1) and G band (1590 cm-1). Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were performed to investigate the surface morphologies of the synthesized sediments, which showed a change in the morphology of ZnO from non-uniform spherical nanoparticles to a rod-like morphology of the prepared hybrid nanostructures. RAMAN spectra revealed that the retained functional groups on rGO planes were significant in anchoring ZnO to rGO. At lowest and maximum doses of ZnO, substantial bactericidal zones (p < 0.05) for S. aureus (1.55 and 1.95 mm) and E. coli (1.25 and 1.70 mm) were achieved accordingly. Additionally, the inhibition regions were 2.45-3.85 mm and 3.75-6.85 mm for S. aureus whereas (2.05-3.25 mm) and (2.95-3.90 mm) for E. coli at the lowest and maximum concentrations.

Multifunctional ZnO-Co3O4 @ polymer hybrid nanocoatings with controlled adsorption, photocatalytic and anti-microbial functions for polluted water systems

Triple action pollutant responsive multi-layer hybrid nanocoatings of architecture PEI(PAA/ZnO-Co3O4)n were constructed through ZnO-Co3O4 binary oxide co-precipitation followed by its inclusion in multi-layer polymeric thin films using Layer-by-Layer (LbL) deposition. Characterization of the designed architecture was carried out via FTIR, XRD, UV-Vis, and Raman spectroscopic studies to evaluate the chemical nature, bonding, and crystallographic behavior of ZnO-Co3O4. Peaks of ZnO-Co3O4 were recorded at 586.38, 486.08, and 443.64 cm-1 while pronounced shifting of ZnO characteristic E2 (high) peak ~ 450 cm-1 and appearance of modes around 495, 530, 630, and 719 cm-1 indexed via Raman studies validated Co3O4 impregnation into ZnO structure. XRD patterns of ZnO-Co3O4 compared to their previously reported pristine structures also justified the formation of binary oxide as unit composite. SEM micrographs confirmed homogenous multi-layered depositions while EDX analysis confirmed their uniform elemental distribution in the unit structure. Sequential multi-layer buildup up to 48 layer pairs was monitored using ellipsometry with maximum film thickness ~ 89 nm and by UV-Vis at 376 nm. The prepared thin films exhibited significant photodegradation of methylene blue ~ 91% and Cu (II) adsorption capacity ~ 89% within first 90 min of contact, along with prominent bactericidal efficiency against E. coli within 24 h of reaction time. FAAS, ICP-OES, and UV-Vis spectroscopy analyses make these multifunctional hybrid nanocoatings promising for industrial wastewater as well as drinking water purification setups. Furthermore, protuberant recycling and regenerative capacity make these hybrid nanocoatings an eco-friendly system for hydro-remediation.

Photocatalytic and antibacterial activities of green synthesized Ag doped MgO nanocomposites towards environmental sustainability

The utilization of MgO nanoparticles (NPs) for Photocatalytic and antimicrobial activities has gained lots of attention in recent years. Since silver is an expensive material, it's of interest to check that doping of very small concentration of silver will increase the pollutant degradation efficiency of composites. Here Aloe Vera plant extract was used for synthesis of MgO, Ag NPs and Ag/MgO-nanocomposites (NCs). Green synthesized NPs and NCs were confirmed by using different techniques like UV-Vis, BET, TGA, FTIR, PL, XRD (optical, functional, Thermal, Structural) EDX, TEM, SEM, XPS, EIS and EPR (morphological, elemental, photoelectrical and ROS) studies respectively. Then NPs and NCs were applied for the photocatalytic activity of methylene blue (MB), phenol and antimicrobial studies of E. coli bacteria. Ag/MgO-NCs showed 90.18% dye and 80.67% phenol degradation in 120 min which killed E. Coli pathogenic bacteria in 25 min under solar light irradiations. In disk diffusion methods, it inactivates 24 mm area of bacterial cell growth. Thus, among these green synthesized NPs and NCs, Ag/MgO-NCs exhibited enhanced photocatalytic and antimicrobial activities.

Tailoring the proliferation of fibroblast cells by multiresponsive and thermosensitive stem cells composite F127 hydrogel containing folic acid.MgO:ZnO/chitosan hybrid microparticles for skin regeneration

In this study, biodegradable and thermosensitive F127 hydrogel containing folic acid.MgO:ZnO/chitosan hybrid particles (FMZC) was fabricated as a 3D mesenchymal stem cells (MSCs) delivery vehicle for regenerative medicine and wound healing purposes, in such a way to be responsive to lysozyme and UVA irradiation. The results showed that F127 hydrogel containing FMZC is a suitable and nontoxic construct for encapsulation of MSCs in the presence of lysozyme and UVA irradiation, bearing high stem cell viability and proliferation. The final hydrogel, MSC&FMZC, in response to lysozyme induced a higher proliferation rate and migration in human foreskin fibroblast cells (HFF). These phenomena were attributed to the released F.MgO:ZnO nanocomposites from chitosan microparticles and paracrine factors from MSCs within the hydrogel, resulting in synergistic biological effects. Moreover, lysozyme-treated MSC&FMZC hydrogel showed higher antibacterial and anti-biofilm activity against both Gram-positive and Gram-negative bacteria than bare hydrogel. However, a significant increase in the antibacterial activity of MSC&FMZC was observed as the treated bacteria were subjected to UVA irradiation owing to the photocatalytic activity of F.MgO:ZnO nanocomposites. Regarding the antibacterial activity and stimulating skin cell behavior of MSC&FMZC hydrogel that can promote the regenerative activities of skin, it could be considered as a promising scaffold for bacteria-accompanied wound healing.

Facile Synthesis, Characterization, Photocatalytic Activity, and Cytotoxicity of Ag-Doped MgO Nanoparticles

Due to unique physicochemical properties, magnesium oxide nanoparticles (MgO NPs) have shown great potential for various applications, including biomedical and environmental remediation. Moreover, the physiochemical properties of MgO NPs can be tailored by metal ion doping that can be utilized in photocatalytic performance and in the biomedical field. There is limited study on the photocatalytic activity and biocompatibility of silver (Ag)-doped MgO NPs. This study was planned for facile synthesis, characterization, and photocatalytic activity of pure and silver (Ag)-doped MgO NPs. In addition, cytotoxicity of pure and Ag-doped MgO NPs was assessed in human normal umbilical vein endothelial cells (HUVECs). Pure MgO NPs and Ag-doped (1, 2, 5, and 7.5 mol%) MgO NPs were prepared via a simple sol-gel procedure. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS) were used to characterize the prepared samples. XRD results showed the preparation of highly crystalline NPs with no impurity peaks. TEM and SEM studies indicate smooth surfaces with almost spherical morphology of MgO NPs, and Ag-doping did not change the morphology. Elemental composition study suggested that Ag is uniformly distributed in MgO particles. Intensity of the PL spectra of MgO NPs decreased with increasing the concentration of Ag dopants. In comparison to pure MgO NPs, Ag-MgO NPs showed higher degradation of methylene blue (MB) dye under UV irradiation. The improved photocatalytic activity of Ag-MgO NPs was related to the effect of dopant concentration on reducing the recombination between electrons and holes. Cytotoxicity studies showed good biocompatibility of pure and Ag-doped MgO NPs with human normal umbilical vein endothelial cells (HUVECs). These results highlighted the potential of Ag-doped MgO NPs in environmental remediation.

Water hyacinth plant extract mediated green synthesis of Cr2O3/ZnO composite photocatalyst for the degradation of organic dye

The Cr2O3/ZnO composite catalysts with varying the amount of chromium precursors abbreviated as 0.02CrZn, 0.04CrZn, 0.06CrZn, 0.08CrZn, 0.1CrZn, and fixed the amount of Zn precursor (0.1 M) were prepared by using water hyacinth (Eichhornia crassipes) extract as a template/capping agent. The prepared catalysts were characterized and the catalytic performances of the catalysts were also checked for the degradation of methylene blue (MB) dye. The photocatalytic MB dye degradation by 0.08CrZn catalyst was achieved and 85% of MB dye was degraded within 90 min irradiation time. However, 0.1CrZ, 0.06CrZ, 0.04CrZ, 0.02CrZ, ZnO, and Cr2O3 catalysts degrade only 80, 74, 79, 76, 52, and 74% of MB dye, respectively. The catalytic performances indicated that the addition of optimum amount of chromium precursor in the preparation of Cr2O3/ZnO composite catalysts with the aid of Eichhornia crassipes plant extract enhances the catalytic activities. This performance enhancement could be as a result of reducing the electron/hole pair separation and the porosity resulted from the plant extract in the catalyst system.

Therapeutic potential of biogenic titanium dioxide nanoparticles: a review on mechanistic approaches

Biogenic titanium dioxide nanoparticles have unique size, shape and biochemical functional corona that embellish them with the potential to perform therapeutic actions such as anticancer, antimicrobial, antioxidant, larvicidal and photocatalysis by adopting various mechanistic or physiological approaches at the molecular level. We have provided a detailed overview of some of these physiological mechanisms, including disruption of the electron transport chain, DNA fragmentation, mitochondrial damage, induction of apoptosis, disorganization of the plasma membrane, inhibition of ATP synthase activity, suspension of cellular signaling pathways and inhibition of enzymatic activity. The biogenic synthesis of customized titanium dioxide nanoparticles has future application potentials to do breakthroughs in the pharmaceutical sectors to advance precision medicine and to better explain the disease prognosis and treatment strategies.

Effective Strategies, Mechanisms, and Photocatalytic Efficiency of Semiconductor Nanomaterials Incorporating rGO for Environmental Contaminant Degradation

The water pollution problems severely affect the natural water resources due to the large disposal of dyes, heavy metals, antibiotics, and pesticides. Advanced oxidation processes (AOP) have been developed using semiconductor nanomaterials as photocatalysts for water treatment as an essential strategy to minimize environmental pollution. Significant research efforts have been dedicated over the past few years to enhancing the photocatalytic efficiencies of semiconductor nanomaterials. Graphene-based composites created by integrating reduced graphene oxide (rGO) into various semiconductor nanomaterials enable the unique characteristics of graphene, such as the extended range of light absorption, the separation of charges, and the high capacity of adsorption of pollutants. Therefore, rGO-based composites improve the overall visible-light photocatalytic efficiency and lead to a new pathway for high-performance photocatalysts’ potential applications. This brief review illustrates the strategies of combining rGO with various semiconductor nanomaterials and focuses primarily on modification and efficiency towards environmental contaminants.

A rapid green synthesis of Ag/AgCl-NC photocatalyst for environmental applications

The present study focuses on extract-mediated Ag nanoparticles (NPs), AgCl-NPs, and Ag/AgCl nanocomposites (NCs) as photocatalysts along with its antimicrobial and dye degradation activities. The synthesis of these NPs and NCs was performed by using Azadirachta indica plant fruit extract and analyzed using UV-Vis spectroscopy to confirm the synthesis and band gap of these NPs and NCs, X-ray diffraction (XRD) to determine its size and crystalline nature. Fourier transform infrared spectroscopy (FTIR) to discern phytochemicals, responsible for the reduction and capping of the synthesized NCs. Scanning electron microscopy analysis (SEM), transmission electron microscopy analysis (TEM), and energy dispersive X-ray (EDX) spectroscopy analysis were performed to validate the morphology and presence of silver and chloride percentage in the composites. Later, these NPs and NCs were used for their potential role in photocatalytic degradation of methylene blue dye and antibacterial activity against Escherichia coli and Staphylococcus aureus of human pathogen. The prepared Ag/AgCl-NCs exhibited an enhanced photocatalytic and antibacterial activities in comparison with pure Ag and AgCl nanomaterials. However, green-synthesized NPs and NCs played dual roles as a photocatalyst and antibacterial agent in various biomedical and industrial sectors. Moreover, we found that it might be a hot research in many other environmental applications in upcoming days.

Graphitic carbon nitride: a sustainable photocatalyst for organic pollutant degradation and antibacterial applications

Recently, graphitic carbon nitride (GCN) has been found to be of great interest in various sustainable applications. In this study, a simple preparation method using urea was utilized to synthesize GCN. In order to understand various morphological, structural, and optical aspects of the as-prepared sample, GCN was characterized using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, Brunauere-Emmette-Teller (BET), scanning electron microscopy (SEM), and diffused reflectance spectra (DRS) analysis. The visible-light-driven photocatalytic activity of prepared GCN was analyzed for various cationic dyes (Crystal violet, rose bengal, rhodamine B, auramine O, methylene blue) and anionic dyes (phenol red, xylenol orange, cresol red, methyl orange). The calculated efficiencies of degradation and values of apparent rate constant for all dye samples suggested that cationic dyes are more actively degraded using GCN than anionic dyes. In addition, GCN was further analyzed for its splendid antibacterial activity against pathogenic bacteria (Klebsiella pneumonia and Escherichia coli). The synthesized photocatalyst holds a bright scope for the efficient remediation of organic pollutants and bacterial disinfection in wastewater. Graphical abstract.

A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

Metal oxide nanomaterials are one of the preferences as antibacterial active materials. Due to its distinctive electronic configuration and suitable properties, ZnO is one of the novel antibacterial active materials. Nowadays, researchers are making a serious effort to improve the antibacterial activities of ZnO by forming a composite with the same/different bandgap semiconductor materials and doping of ions. Applying capping agents such as polymers and plant extract that control the morphology and size of the nanomaterials and optimizing different conditions also enhance the antibacterial activity. Forming a nanocomposite and doping reduces the electron/hole recombination, increases the surface area to volume ratio, and also improves the stability towards dissolution and corrosion. The release of antimicrobial ions, electrostatic interaction, reactive oxygen species (ROS) generations are the crucial antibacterial activity mechanism. This review also presents a detailed discussion of the antibacterial activity improvement of ZnO by forming a composite, doping, and optimizing different conditions. The morphological analysis using scanning electron microscopy, field emission-scanning electron microscopy, field-emission transmission electron microscopy, fluorescence microscopy, and confocal microscopy can confirm the antibacterial activity and also supports for developing a satisfactory mechanism. Graphical abstract showing the metal oxides antibacterial mechanism and the fluorescence and scanning electron microscopic images.

Effect of tungsten doping on the structural, morphological and bactericidal properties of nanostructured CuO

Copper oxide (CuO) has been broadly used in different technological and biological applications. However, based on the literature review, there are few reports describing the synthesis of tungsten doped copper oxide and its biological applications, although CuO and W (tungsten) based nanomaterials have been reportedly already synthesized. In this study we synthesized novel CuO and CuO/W (at.1%, 2% and 4%) nanoparticles and explored their tungsten content-dependent bactericide activity. In order to obtain the materials, was used a co-precipitation method which is of low cost. The synthesized materials were characterized by x-ray diffraction (XRD); XRD results indicated that only the sample with at.1% of W presented pure Tenorite phase. Diffuse reflectance spectroscopy (DRS) allowed to obtain the band gap energy values; CuO/W (at.2%) sample exhibited the minimum value of 2.62 eV. Grains sizes ranging from 39.78 to 53.47 nm were established through field emission—scanning electronic microscopy (FE-SEM), and these sizes were confirmed by transmission electron microscopy (TEM). Doping with W also influenced the morphology obtained in all cases. BET (Brunauer, Emmett, Teller) analysis allowed to establish an increase in specific surface area and pore size with W doping. The particle size was determined by dynamic light scattering (DLS). The bactericidal properties were tested using well diffusion method for Escherichia coli and Staphylococcus aureus bacteria. Bactericide response of CuO nanoparticles was improved by the inclusion of W dopant into the CuO structure, leading to an expansion in the inhibition zone for the CuO/W (at.1%) sample; inhibition halo diameters were 1.5 and 12 mm for CuO and CuO/W (at.1%), respectively. Hence, it was possible to infer the remarkable importance of the crystalline phase, morphology, particle size and specific superficial area of the CuO/W (at.1%) nanoparticles in its bactericide performance. WO₃ secondary phase affected the bactericide response of the materials obtained at at.2% and at.4% of tungsten content.

Novel magnetic Fe3O4/g-C3N4/MoO3 nanocomposites with highly enhanced photocatalytic activities: Visible-light-driven degradation of tetracycline from aqueous environment

In the present work, a series of magnetically separable Fe3O4/g-C3N4/MoO3 nanocomposite catalysts were prepared. The as-prepared catalysts were characterized by XRD, EDX, TEM, FT-IR, UV-Vis DRS, TGA, PL, BET and VSM. The photocatalytic activity of photocatalytic materials was evaluated by catalytic degradation of tetracycline solution under visible light irradiation. Furthermore, the influences of weight percent of MoO3 and scavengers of the reactive species on the degradation activity were investigated. The results showed that the Fe3O4/g-C3N4/MoO3 (30%) nanocomposites exhibited highest removal ability for TC, 94% TC was removed during the treatment. Photocatalytic activity of Fe3O4/g-C3N4/MoO3 (30%) was about 6.9, 5, and 19.9-fold higher than those of the MoO3, g-C3N4, and Fe3O4/g-C3N4 samples, respectively. The excellent photocatalytic performance was mainly attributed to the Z-scheme structure formed between MoO3 and g-C3N4, which enhanced the efficient separation of the electron-hole and sufficient utilization charge carriers for generating active radials. The highly improved activity was also partially beneficial from the increase in adsorption of the photocatalysts in visible range due to the combinaion of Fe3O4. Superoxide ions (·O2-) was the primary reactive species for the photocatalytic degradation of TC, as degradation rate were decreased to 6% in solution containing benzoquinone (BQ). Data indicate that the novel Fe3O4/g-C3N4/MoO3 was favorable for the degradation of high concentrations of tetracycline in water.

ZnO-Modified g-C3N4: A Potential Photocatalyst for Environmental Application

Solar energy-driven practices using semiconducting materials is an ideal approach toward wastewater remediation. In order to attain a superior photocatalyst, a composite of g-C3N4 and ZnO (GCN-ZnO) has been prepared by one-step thermal polymerization of urea and zinc carbonate basic dihydrate [ZnNO3]2·[Zn(OH)2]3. The GCN-ZnO0.4 sample showed an evolved morphology, increased surface area (116 m2 g-1), better visible light absorption ability, and reduced band gap in comparison to GCN-pure. The GCN-ZnO0.4 sample also showed enhanced adsorption and photocatalytic activity performance, resulting in an increased reaction rate value up to 3 times that of GCN-pure, which was attributed to the phenomenon of better separation of photogenerated charge carriers resulting because of heterojunction development among interfaces of GCN-pure and ZnO. In addition, the GCN-ZnO0.4 sample showed a decent stability for four cyclic runs and established its potential use for abatement of organic wastewater pollutants in comparison to GCN-pure.