Nanoscale zero-valent iron particles modified on reduced graphene oxides using a plasma technique for Cd(II) removal

Adsorptive removal of heavy metals from aqueous solutions: Progress of adsorbents development and their effectiveness

Increased levels of heavy metals (HMs) in aquatic environments poses serious health and ecological concerns. Hence, several approaches have been proposed to eliminate/reduce the levels of HMs before the discharge/reuse of HMs-contaminated waters. Adsorption is one of the most attractive processes for water decontamination; however, the efficiency of this process greatly depends on the choice of adsorbent. Therefore, the key aim of this article is to review the progress in the development and application of different classes of conventional and emerging adsorbents for the abatement of HMs from contaminated waters. Adsorbents that are based on activated carbon, natural materials, microbial, clay minerals, layered double hydroxides (LDHs), nano-zerovalent iron (nZVI), graphene, carbon nanotubes (CNTs), metal organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs) are critically reviewed, with more emphasis on the last four adsorbents and their nanocomposites since they have the potential to significantly boost the HMs removal efficiency from contaminated waters. Furthermore, the optimal process conditions to achieve efficient performance are discussed. Additionally, adsorption isotherm, kinetics, thermodynamics, mechanisms, and effects of varying adsorption process parameters have been introduced. Moreover, heavy metal removal driven by other processes such as oxidation, reduction, and precipitation that might concurrently occur in parallel with adsorption have been reviewed. The application of adsorption for the treatment of real wastewater has been also reviewed. Finally, challenges, limitations and potential areas for improvements in the adsorptive removal of HMs from contaminated waters are identified and discussed. Thus, this article serves as a comprehensive reference for the recent developments in the field of adsorptive removal of heavy metals from wastewater. The proposed future research work at the end of this review could help in addressing some of the key limitations facing this technology, and create a platform for boosting the efficiency of the adsorptive removal of heavy metals.

Green cleanup of styrene-contaminated soil by carbon-based nanoscale zero-valent iron and phytoremediation: Sunn hemp (Crotalaria juncea), zinnia (Zinnia violacea Cav.), and marigold (Tagetes erecta L.)

Accidental chemical spills can result in styrene-contaminated soil. Styrene negatively affects human health and the environment. The objective of this study was to remediate styrene-contaminated soil using a combination of activated carbon-based nanoscale zero-valent iron (nZVI-AC) and phytoremediation by sunn hemp (Crotalaria juncea), zinnia (Zinnia violacea Cav.) and marigolds (Tagetes erecta L.). The results showed that all three plant types could potentially increase the removal efficiency of styrene-contaminated soil. At 28 days, all three plants showed complete removal of styrene from the soil with 1 g/kg of nZVI-AC, activated carbon-based nZVI synthesized by tea leaves (Camellia sinensis) (T-nZVI-AC), or activated carbon-based nZVI synthesized by red Thai holy basil (Ocimum tenuiflorum L.) (B-nZVI-AC). However, styrene removal efficiencies of sunn hemp, zinnia, and marigold without carbon-based nZVI were 30%, 67%, and 56%, respectively. Statistical analysis (ANOVA) revealed that the removal efficiencies differed significantly from those of phytoremediation alone. With the same removal efficiency (100%), the biomass of sunn hemp in nano-phytoremediation treatments differed by approximately 55%, whereas the biomass of zinnia differed by >67%, compared with that of the control experiment. For marigold, the difference in biomass was only 30%. Styrene was adsorbed on surface of soil and AC and then further oxidized under air-water-nZVI environment, while phytovolatilization played an important role in transporting the remaining styrene from the contaminated soil to the air. Marigold was used as an alternative plant for the nano-phytoremediation of styrene-contaminated soil because of its sturdy nature, high biomass, tolerance to toxic effects, and ease of cultivation. Remediation of one cubic meter of styrene-contaminated soil by a combination of carbon-based nanoscale zero-valent iron and phytoremediation by marigolds emitted 0.0027 kgCO2/m3.

Eco-friendly nanoparticles: mechanisms and capacities for efficient removal of heavy metals and phosphate from water using definitive screening design approach

Can nano-zero-valent iron, synthesized using oak leaf extract, be the key solution for water preservation, efficiently removing heavy metal ions and phosphate anions simultaneously? This research unveils how this technology not only promises high efficiency in the remediation of water resources, but also sets new standards for environmentally friendly processes. The high antioxidant capacity and high phenol content indicate suggest the possibility of oak-nZVI synthesis using oak leaf extract as a stable material with minimal agglomeration. The simultaneous removal of Cd and phosphates, as well as and Ni and phosphates was optimized by a statistically designed experiment with a definitive screening design approach. By defining the key factors with the most significant impact, a more efficient and faster method is achieved, improving the economic sustainability of the research by minimizing the number of experiments while maximizing precision. In terms of significance, four input parameters affecting process productivity were monitored: initial metal concentration (1-9 mg L-1), initial ion concentration (1-9 mg L-1), pH value (2-10), and oak-nZVI dosage (2-16 mL). The process optimization resulted in the highest simultaneous removal efficiency of 98.99 and 87.30% for cadmium and phosphate ions, respectively. The highest efficiency for the simultaneous removal of nickel and phosphate ions was 93.44 and 96.75%, respectively. The optimization process fits within the confidence intervals, which confirms the assumption that the selected regression model well describes the process. In the context of e of the challenges and problems of environmental protection, this work has shown considerable potential and successful application for the simultaneous removal of Cd(II) and Ni(II) in the presence of phosphates from water.

Optimization of LDO-Pectin Synthesis Conditions for the Removal of Metals from Wastewater: A Comparison of Response Surface Methods and Taguchi Approaches

With the continuous growth of industrialization, the presence of heavy metals (HMs) in the environment has become a critical issue, necessitating cost-effective and efficient techniques for their removal. The present study aimed to determine the optimal preparation conditions for synthesizing pectin (PC) as a polymer sorbent, combined with Magnesium (Mg) Aluminum (Al) layered double oxides (LDOs), using a fast and facile co-precipitation method. Both the response surface method (RSM) and the Taguchi method were employed to optimize the influence of key independent variables, including the molar ratio of cations Mg:Al, the ratio of pectin to LDO, and the temperature for removing multiple elements from wastewater. The results indicated that RSM is more accurate and examines more interactions, while Taguchi reduces the number of tests and is more economical than RSM. However, both statistical methods showed good potential for predicting the adsorption capacity (Qe) of HMs. The optimal preparation conditions were identified as a molar ratio of 3:1, a ratio of pectin to LDO of 7% w/w, and a temperature of approximately 600 °C. In conclusion, the application of RSM and Taguchi approaches was found to be feasible and effective in optimizing the preparation conditions of modified LDO, which can be utilized as a potential adsorbent for removing multiple elements from wastewater.

Highly Stable, Mechanically Enhanced, and Easy-to-Collect Sodium Alginate/NZVI-rGO Gel Beads for Efficient Removal of Cr(VI)

Nanoscale zero-valent iron (NZVI) is a material that is extensively applied for water pollution treatment, but its poor dispersibility, easy oxidation, and inconvenient collection limit its application. To overcome these drawbacks and limit secondary contamination of nanomaterials, we confine NZVI supported by reduced graphene oxide (rGO) in the scaffold of sodium alginate (SA) gel beads (SA/NZVI-rGO). Scanning electron microscopy showed that the NZVI was uniformly dispersed in the gel beads. Fourier transform infrared spectroscopy demonstrated that the hydrogen bonding and conjugation between SA and rGO allowed the NZVI-rGO to be successfully embedded in SA. Furthermore, the mechanical strength, swelling resistance, and Cr(VI) removal capacity of SA/NZVI-rGO were enhanced by optimizing the ratio of NZVI and rGO. Interestingly, cation exchange may drive Cr(VI) removal above 82% over a wide pH range. In the complex environment of actual Cr(VI) wastewater, Cr(VI) removal efficiency still reached 70.25%. Pseudo-first-order kinetics and Langmuir adsorption isotherm are preferred to explain the removal process. The mechanism of Cr(VI) removal by SA/NZVI-rGO is dominated by reduction and adsorption. The sustainable removal of Cr(VI) by packed columns could be well fitted by the Thomas, Adams-Bohart, and Yoon-Nelson models, and importantly, the gel beads maintained integrity during the prolonged removal. These results will contribute significant insights into the practical application of SA/NZVI-rGO beads for the Cr(VI) removal in aqueous environments.

Applications of functional nanoparticle-stabilized surfactant foam in petroleum-contaminated soil remediation

Surfactant foam (SF) can be used to remediate petroleum-contaminated soil because of its easy transfer to inhomogeneous and low-permeability formations. Nanoparticles (NPs) not only stabilize SF under extreme conditions but also impart various functions, aiding the removal of petroleum contaminants. This review discusses the stabilization mechanisms of nanoparticle-stabilized SF (NP-SF) as well as the effects of NP size, chargeability, wettability, and NP-to-surfactant ratio on foam stability. SF stabilized by inert SiO₂ NPs is most commonly used to remediate soil contaminated with crude oil and diesel. Low dose of SF stabilized by nano zero-valent iron is cost-effective for treating soil contaminated with chlorinated organics and heavy metal ions. The efficiency and recyclability of Al₂O₃/Fe₃O₄ NPs in the remediation of diesel and crude oil contamination could be enhanced by applying a magnetic field. This review provides a theoretical basis and practical guidelines for developing functional NP-SF to improve the remediation of petroleum-contaminated soils. Future research should focus on the structural design of photocatalytic NPs and the application of catalytic NP-SF in soil remediation.

Graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) for antimony removal: The role of active oxygen species and reaction mechanism

Sulfidated nano zero-valent iron (S-nZVI) was used to remove various pollutants from wastewater. However, the instability, poor dispersibility, and low electron transfer efficiency of S-nZVI limit its application. Herein, graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) was successfully synthesized using graphene oxide (GO) as a carrier. The properties of S-nZVI@GO were characterized by scanning electron microscopy coupled to X-ray photoelectron spectroscopy (SEM-EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) concerning the surface morphology, crystalline structure, and elemental components. S-nZVI@GO displayed an excellent capacity for antimony (Sb) removal under aerobic conditions (96.7%), with a high adsorption capacity (Q_max = 311.75 mg/g). It maintained a high removal rate (over 90%) during a wide pH range (3-9). More importantly, S-nZVI@GO activated the molecular oxygen in water via a single-electron pathway to produce •O₂－ and H₂O₂, and then oxidized trivalent antimony (Sb(III)) to pentavalent antimony (Sb(V)) and further separated it by synergistic adsorption and co-precipitation. Therefore, S-nZVI@GO shows excellent potential for Sb contamination remediation.

Insights into the mechanism underlying remediation of Cr(VI) contaminated aquifer using nanoscale zero-valent iron@reduced graphene oxide

Currently, there is an urgent need to develop functional nanomaterials for highly effective environmental remediation. However, the long-term effect of remedial materials upon their injection into contaminated aquifer has frequently been overlooked. Here, the remediation of Cr(VI) contaminated aquifer by reduced graphene oxide (rGO) supported nanoscale zero-valent iron (nZVI@rGO) was investigated from a long-term perspective. The performances of nZVI@rGO samples with different rGO loadings in the removal of aqueous Cr(VI) were evaluated in batch experiments. The electron transfer properties different nZVI@rGO samples were investigated by measuring their corrosive potentials using the steady-state Tafel polarization curves. The results show that the electron transfer efficiency between Cr(VI) and nZVI@rGO is enhanced owing to the large reactive conjugated structure of rGO. Besides, the surface passivation of nZVI is effectively retarded due to the uniform accommodation of Cr(III) precipitates on rGO. The structure and composition of nZVI@rGO before and after Cr(VI) removal were analyzed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The characterization results revealed that most Cr(VI) ions (∼90%) will be reduced to Cr(III) precipitates on nZVI@rGO as the passivation product. Accordingly, Cr(VI) ions tend to react more readily at less blocked regions on the surface of rGO, and a layer-by-layer passivation model on nZVI@rGO surface is proposed. Our results provide new insights into the mechanism underlying the long-term remediation of Cr(VI) contaminated aquifer using nZVI@rGO, which helps design new materials and approaches for practical in-situ remediation engineering.

Sulfhydryl Functionalized Magnetic Chitosan as an Efficient Adsorbent for High-Performance Removal of Cd(II) from Water: Adsorption Isotherms, Kinetic, and Reusability Studies

In this study, dimercaptosuccinic acid-functionalized magnetic chitosan (Fe3O4@CS@DMSA) was synthesized via in situ coprecipitation process and amidation reaction, aiming to eliminate cadmium (Cd(II)) ions from an aqueous environment. The structure, morphology, and particle size of the Fe3O4@CS@DMSA adsorbent were investigated using FTIR, TEM, EDX, TGA, zeta potential, and XRD techniques, and the obtained results approved the successful synthesis of the Fe3O4@CS@DMSA nanocomposite. The influence of external adsorption conditions such as pH solution, adsorbent mass, initial Cd(II) concentration, temperature, and contact time on the adsorption process was successfully achieved. Accordingly, pH: 7.6, contact time: 210 min, and adsorbent mass:10 mg were found to be the optimal conditions for best removal. The adsorption was analyzed using nonlinear isotherm and kinetic models. The outcomes revealed that the adsorption process obeyed the Langmuir and the pseudo-first-order models. The maximum adsorption capacity of Fe3O4@CS@DMSA toward Cd(II) ion was 314.12 mg/g. The adsorption mechanism of Cd(II) on Fe3O4@CS@DMSA nanocomposite is the electrostatic interaction. The reusability test of Fe3O4@CS@DMSA nanocomposite exhibited that the adsorption efficiency was 72% after the 5th cycle. Finally, this research indicates that the Fe3O4@CS@DMSA exhibited excellent characteristics such as high adsorption capacity, effective adsorption-desorption results, and easy magnetic separation and thus could be an effective adsorbent for removing Cd(II) ions from aqueous solutions.

Sodium citrate and biochar synergistic improvement of nanoscale zero-valent iron composite for the removal of chromium (Ⅵ) in aqueous solutions

Sodium citrate (SC) is a widely-used food and industrial additive with the properties of complexation and microbial degradation. In the present study, nano-zero-valent iron reaction system (SC-nZVI@BC) was successfully established by modifying nanoscale zero-valent iron (nZVI) with SC and biochar (BC), and was employed to remove Cr(Ⅵ) from aqueous solutions. The nZVI, SC-nZVI and SC-nZVI@BC were characterized and compared using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyses (TGA), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results showed that nZVI was successfully loaded on the biochar, and both the agglomeration and surface passivation problems of nanoparticles were well resolved. The dosage of SC, C:Fe, initial pH and Cr(Ⅵ) concentration demonstrated direct effects on the removal efficiency. The maximum Cr(Ⅵ) removal rate and the removal capacity within 60 min were 99.7% and 199.46 mg/g, respectively (C:Fe was 1:1, SC dosage was 1.12 mol.%, temperature was 25°C, pH = 7, and the original concentration of Cr(Ⅵ) was 20 mg/L). The reaction confirmed to follow the pseudo-second-order reaction kinetics, and the order of the reaction rate constant k was as follows: SC-nZVI@BC > nZVI@BC > SC-nZVI > nZVI. In addition, the mechanism of Cr(Ⅵ) removal by SC-nZVI@BC mainly involved adsorption, reduction and co-precipitation, and the reduction of Cr(Ⅵ) to Cr(Ⅲ) by nano Fe⁰ played a vital role. Findings from the present study demonstrated that the SC-nZVI@BC exhibited excellent removal efficiency toward Cr(Ⅵ) with an improved synergistic characteristic by SC and BC.

Remediation of noxious wastewater using nanohybrid adsorbent for preventing water pollution

Removal of toxic elements from wastewater effluent has got a lot of attention because of their severe negative effects on human and environmental health. In the past few years, rapid urbanization and industrial activities in developing countries have exacerbated the destruction of the environment. Most of the wastewater effluents are discharged untreated or inadequately treated, which has become a major concern due to its impact on sustainability and the environment. This is imperative to implement, innovative and resourceful wastewater treatment technologies requiring low investment. Among the various treatment technologies, cutting-edge processes in nano-material sciences have recently piqued the interest of scientists. Nanohybrid absorbents have the potential in improving wastewater treatment and increase water supply by utilizing unconventional water resources. Carbon nanotubes, titanium oxide, manganese oxide, activated carbon (AC), magnesium oxide, graphene, ferric oxides, and zinc oxide are examples of nano-adsorbents that are used to eliminate pollutants. This also demonstrated the effective removal of contaminants along with the harmful effects of chemicals, colorants, and metals found in wastewater. The present manuscript examines potential advances in nanotechnology in wastewater treatment for the prevention of water and soil pollution. This systematic review aims to highlight the importance of nanohybrid absorbents treatment technology for wastewater treatment and to explain how nanohybrid absorbents have the potential to revolutionize industrial pollution. There are also other published review articles on this topic but the present review covers an in-depth information on nano-adsorbents and their targeted contaminants.

Recent advances of carbon-based nano zero valent iron for heavy metals remediation in soil and water: A critical review

Heavy metal pollution in soil and water has presented a new challenge for the environmental remediation technology. Nano zero valent iron (nZVI) has excellent adsorbent properties for heavy metals, and thus, exhibits great potential in environmental remediation. Used as supporting materials for nZVI, carbon-based materials, such as activated carbon (AC), biochar (BC), carbon nanotubes (CNTs), and graphene (GNs) with aromatic rings formed by carbon atoms as the skeleton, have a large specific surface area and porous structure. This paper provides a comprehensive review on the advancement of carbon-based nano zero valent iron (C-nZVI) particles for heavy metal remediation in soil and water. First, different types of carbon-based materials and their combination with nZVI, as well as the synthesis methods and common characterization techniques of C-nZVI, are reviewed. Second, the mechanisms for the interactions between contaminants and C-nZVI, including adsorption, reduction, and oxidation reactions are detailed. Third, the environmental factors affecting the remediation efficiency, such as pH, coexisting constituents, oxygen, contact time, and temperature, are highlighted. Finally, perspectives on the challenges for utilization of C-nZVI in the actual contaminated soil and water and on the long-term efficacy and safety evaluation of C-nZVI have been proposed for further development.

Highly efficient removal of Cr(VI) from aqueous solution by pinecone biochar supported nanoscale zero-valent iron coupling with Shewanella oneidensis MR-1

Nanoscale zero-valent iron (nZVI) has been extensively used to remove various pollutants. However, the rapid deactivation due to aggregation and surface passivation severely limits its practical application. In this study, a novel composite with nZVI supported by pinecone biochar (nZVI-PBC) was successfully synthesized and used for the removal of high concentration Cr(VI) from aqueous solution in the presence of Shewanella oneidensis MR-1 (MR-1). The results showed that the nZVI-PBC coupling with MR-1 (nZVI-PBC/MR-1) exhibited an excellent removal performance for high concentration Cr(VI) compared to the nZVI-PBC alone. Under optimal conditions, 100 mg/L Cr(VI) could be removed completely by nZVI-PBC/MR-1 within 48 h, while only 39.50% of Cr(VI) was removed by nZVI-PBC alone. The improvement of Cr(VI) removal is due to the dissolution of the surface passivation layer of nZVI-PBC, formation of sorbed Fe(II) in the presence of MR-1, and an important role of extracellular polymeric substance (EPS) derived from MR-1. X-ray photoelectron spectroscopy (XPS) and Cr K-edge X-ray absorption near-edge structure spectra (XANES) confirmed that most Cr(VI) was reduced to insoluble Cr(III) and formed Cr₂O₃, Cr_xFe_1-x(OH)₃ and FeCr₂O₄ precipitates, and a small amount of unreduced Cr(VI) was immobilized through adsorption and complexation. The results suggest that nZVI-PBC/MR-1 can effectively overcome the limitations of nZVI and achieve highly efficient removal of high concentration Cr(VI).

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Efficient Removal of 2,4-DCP by Nano Zero-Valent Iron-Reduced Graphene Oxide: Statistical Modeling and Process Optimization Using RSM-BBD Approach

In this study, nano zero-valent iron-reduced graphene oxide (NZVI-rGO) composites were synthesized to remove 2,4-dichlorophenol (2,4-DCP) as an efficient adsorbent. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) indicated that NZVI particles were successfully loaded and dispersed uniformly on rGO nanosheets. Fourier transform infrared spectroscopy (FTIR) analysis showed that the interaction between NZVI-rGO and 2,4-DCP promoted the adsorption process. A three-level, four-factor Box-Behnken design (BBD) of the response surface methodology (RSM) was used to optimize the influencing factors including NZVI-rGO dosage, 2,4-DCP initial concentration, reaction time and initial pH. A statistically significant, well-fitting quadratic regression model was successfully constructed to predict 2,4-DCP removal rate. The high $F$ value (15.95), very low $P$ value (<0.0001), nonsignificant lack of fit, and appropriate coefficient of determination ( $R^2=0.941$ ) demonstrate a good correlation between the experimental and predicted values of the proposed model. The analyses of variance reveal that NZVI-rGO dosage and reaction time have a positive effect on 2,4-DCP removal, whereas the increase of contaminant concentration and initial pH inhibit the removal, whereas the effect of contaminant concentration and initial pH is in reverse, where the change of NZVI-rGO dosage has the greatest effect. The optimum condition is1.215 g/L of NZVI-rGO dosage, 20.856 mg/L of 2,4-DCP concentration, 4.115 of pH, and 8.157 min of reaction time. It is verified by parallel experiments under the optimum condition, achieving the removal efficiency of100%.

Carbamazepine removal from aqueous solution by synthesized reduced graphene oxide-nano zero valent iron (Fe0-rGO) composite: theory, process optimization, and coexisting drugs effects

Synthesized Fe⁰-rGO nanocomposite with ratio of 1/1 (w/w) was prepared and has been used as adsorbent for the removal of Carbamazepine (CBZ) from aqueous solution. The adsorbent was characterized by various techniques such as Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Field Emission Scanning Electron Microscopy (FE-SEM) analyses. Linear experiments were performed to compare the best fitting isotherms and kinetics. The Freundlich isotherm (R²>0.90) and pseudo second order kinetic (R²>0.99) fitted well the experimental data. On the basis of the Langmuir isotherm, the maximum adsorption capacity of Fe⁰-rGO for CBZ was up to 50 mg g^-1 at 30 °C. The pH, adsorbent dose, and initial concentration of CBZ were observed to be the leading parameters that affected the removal of CBZ considering the analysis of variance (ANOVA; p<0.05). The optimum process value of variables obtained by numerical optimization corresponds to pH 3.07, an adsorbent dose of 36.2 mg, an initial CBZ concentration of 5 mg L^-1 and at 30.15 °C. The results of optimum conditions reveal that a maximum of 94% removal efficiency can be achieved; whereas, this phenomenon was independent of temperature (p-value>0.05). Moreover, Fe⁰-rGO can be used to remove diclofenac (DIC) and cetirizine (CTZ) simultaneously. To sum up, the Fe⁰-rGO is a promising adsorbent not only for the efficient removal of CBZ but also for the reduction of coexisting drugs in aqueous solution.

Nanotechnological approaches as a promising way for heavy metal mitigation in an aqueous system

The ever-rising environmental problems because of heavy metals emerging from anthropogenic activities pose an impending threat to all biota globally. Considering their persistence and possibility in biomagnification, they are prominent among pollutants. There has been an apparent shift of research interest in advancing cost-effective and competent technologies to mitigate environmental contaminants, specifically heavy metals. In the recent two decades, tailored nanomaterials (NMs), nanoparticles, and NM-based adsorbents have been emerging for removing heavy metal pollution on a sustainable scale, especially the green synthesis of these nanoproducts effective and nonhazardous means. Hence, this review explores the various avenues in nanotechnology, an attempt to gauge nanotechnological approaches to mitigate heavy metals in the aqueous system, especially emphasizing the recent trends and advancements. Inputs on remediating heavy metal in sustainable and environmentally benign aspects recommended future directions to compensate for the voids in this domain have been addressed.

Shell biomass material supported nano-zero valent iron to remove Pb2+ and Cd2+ in water

Nanoscale zero-valent iron (NZVI) has a high adsorption capacity for heavy metals, but easily forms aggregates. Herein, preprocessed undulating venus shell (UVS) is used as support material to prevent NZVI from reuniting. The SEM and TEM results show that UVS had a porous layered structure and NZVI particles were evenly distributed on the UVS surface. A large number of adsorption sites on the surface of UVS-NZVI are confirmed by IR and XRD. UVS-NZVI is used for adsorption of Pb2+ and Cd2+ at pH = 6.00 in aqueous solution, and the experimental adsorption capacities are 29.91 and 38.99 mg g-1 at optimal pH, respectively. Thermodynamic studies indicate that the adsorption of ions by UVS-NZVI is more in line with the Langmuir model when Pb2+ or Cd2+ existed alone. For the mixed solution of Pb2+ and Cd2+, only the adsorption of Pb2+ by UVS-NZVI conforms to the Langmuir model. In addition, the maximum adsorption capacities of UVS-NZVI for Pb2+ and Cd2+ are 93.01 and 46.07 mg g-1, respectively. Kinetic studies demonstrate that the determination coefficients (R 2) of the pseudo first-order kinetic model for UVS-NZVI adsorption of Cd2+ and Pb2+ are higher than those of the pseudo second-order kinetic model and Elovich kinetic model. Highly efficient performance for metal removal makes UVS-NZVI show potential application to heavy metal ion adsorption.

Adsorption of cadmium using modified zeolite-supported nanoscale zero-valent iron composites as a reactive material for PRBs

The main challenge in utilizing permeable reactive barriers (PRB) for remediation of metals-contaminated groundwater is determination of a proper low-cost reactive medium that can remove the desired contaminants simultaneously. In this study, the performance of different zeolite materials and nZVI-based adsorbents for cadmium (Cd) removal was compared. Further, a composite of the best nZVI and zeolite samples was synthesized with the removal efficiency of 20.6 g/kg and selected as the proposed adsorbent. Moreover, the characteristics of the composite were analyzed through different techniques (BET, XRF, XRD, FT-IR, FE-SEM and EDX). In addition, through kinetic and thermodynamic studies, the effect of temperature, pH, ionic strength and presence of other metal ions on Cd removal efficiency was investigated. According to the results, since sodium zeolite (NaZ) provides a large number of specific ion-exchange sites for decoration with nZVI, stabilizes nZVI, and prevents its aggregation and further leaching in the harsh environment, the NaZ-nZVI composite is capable of removing Cd by adsorption and is applicable in PRBs, and thus it seems that the aforementioned composite is a proper candidate for groundwater remediation from a wide range of metal ions.

Remediation of heavy metals polluted environment using Fe-based nanoparticles: Mechanisms, influencing factors, and environmental implications

Environmental pollution by heavy metals (HMs) has raised considerable attention due to their toxic impacts on plants, animals and human beings. Thus, the environmental cleanup of these toxic (HMs) is extremely urgent both from the environmental and biological point of view. To remediate HMs-polluted environment, several nanoparticles (NPs) such as metals and its oxides, carbon materials, zeolites, and bimetallic NPs have been documented. Among these, Fe-based NPs have emerged as an effective choice for remediating environmental contamination, due to infinite size, high reactivity, and adsorption properties. This review summarizes the utilization of various Fe-based NPs such as nano zero-valent iron (NZVI), modified-NZVI, supported-NZVI, doped-NZVI, and Fe oxides and hydroxides in remediating the HMs-polluted environment. It presents a comprehensive elaboration on the possible reaction mechanisms between the Fe-based NPs and heavy metals, including adsorption, oxidation/reduction, and precipitation. Subsequently, the environmental factors (e.g., pH, organic matter, and redox) affecting the reactivity of the Fe-based NPs with heavy metals are also highlighted in the current study. Research shows that Fe-based NPs can be toxic to living organisms. In this context, this review points out the environmental hazards associated with the application of Fe-based NPs and proposes future recommendations for the utilization of these NPs.

Simultaneous removal of Cd(II) and As(III) by graphene-like biochar-supported zero-valent iron from irrigation waters under aerobic conditions: Synergistic effects and mechanisms

Irrigation water is commonly contaminated with cadmium and arsenic near mining regions, which significantly contributes to excessive heavy metals in rice grains. Herein, we have developed a novel graphene-like biochar (GB)-supported nanoscale zero-valent iron (nZVI) and the underlying mechanisms of synergistic effects between GB and nZVI for the simultaneous removal of Cd(II) and As(III) under aerobic conditions. The results show that GB/nZVI has a high removal capacity of 363 mg/g (nZVI) for As(III) at pH 4 and 92.8 mg/g (nZVI) for Cd(II) at pH 7. These values are significantly higher than GB and nZVI (1.7 times for Cd(II); 1.4 times for As(III)) alone, suggesting strong synergistic effects between GB and nZVI. GB promotes nZVI oxidation to form iron oxyhydroxides and causing 35 % of As(III) converting to As(V). Importantly, As(III) significantly enhance Cd(II) removal by GB/nZVI (i.e., 131.8 mg/g as nZVI). Coexisting ions such as phosphate and humic acid have a stronger inhibitory effect on the simultaneous removal of Cd(II) and As(III). Our results indicate that oxidation and surface complexation are the dominant mechanisms and electrostatic binding exists for As(III) removal, while surface complexation predominates for Cd(II) removal. These findings provide insight into developing an effective solution for removing Cd(II)/As(III) from irrigation waters.

Three dimensional flower-like magnetic polyethyleneimine@MoS2 composites for highly efficient removal of Cr(VI) and Pb(II) ions

Magnetic Fe₃O₄ nanoparticles were coated by polyethyleneimine (PEI), and then Fe₃O₄@PEI was further modified with MoS₂ by the hydrothermal method to fabricate 3D flower-like structured magnetic polyethyleneimine@MoS₂ (MP@MoS₂) composites, and the composites were served as efficient adsorbents to capture Cr(VI) and Pb(II) from aqueous solution. The effects of temperature, pH, shaking time and environmental conditions on adsorption performance of MP@MoS₂ towards Cr(VI) and Pb(II) have been conducted by batch adsorption experiments. The prepared MP@MoS₂ exhibited high adsorption capacities (192.30 mg/g for Cr(VI) at pH 3.0 and 256.41 mg/g for Pb(II) at pH 6.0) and the adsorption equilibrium could be achieved in a short time. Moreover, MP@MoS₂ composites with high saturation magnetization could be simply separated under an external magnet. Combined experiments and spectral analysis, the underlying adsorption mechanism for Cr(VI) on MP@MoS₂ was mainly attributed to the reduction of Cr(VI) to Cr(III), and the removal of Pb(II) was due to the complexation with sulfur groups and amino-groups. Consequently, the prepared 3D flower-like structured MP@MoS₂ has a great potential for the practical application in removing Cr(VI) and Pb(II) from the aquatic environment.

Synthesis and Application of Zero-Valent Iron Nanoparticles in Water Treatment, Environmental Remediation, Catalysis, and Their Biological Effects

Present and past anthropogenic pollution of the hydrosphere and lithosphere is a growing concern around the world for sustainable development and human health. Current industrial activity, abandoned contaminated plants and mining sites, and even everyday life is a pollution source for our environment. There is therefore a crucial need to clean industrial and municipal effluents and remediate contaminated soil and groundwater. Nanosized zero-valent iron (nZVI) is an emerging material in these fields due to its high reactivity and expected low impact on the environment due to iron's high abundance in the earth crust. Currently, there is an intensive research to test the effectiveness of nZVI in contaminant removal processes from water and soil and to modify properties of this material in order to fulfill specific application requirements. The number of laboratory tests, field applications, and investigations for the environmental impact are strongly increasing. The aim of the present review is to provide an overview of the current knowledge about the catalytic activity, reactivity and efficiency of nZVI in removing toxic organic and inorganic materials from water, wastewater, and soil and groundwater, as well as its toxic effect for microorganisms and plants.

Recent Advances in Applications of Hybrid Graphene Materials for Metals Removal from Wastewater

The presence of traces of heavy metals in wastewater causes adverse health effects on humans and the ecosystem. Adsorption is a low cost and eco-friendly method for the removal of low concentrations of heavy metals from wastewater streams. Over the past several years, graphene-based materials have been researched as exceptional adsorbents. In this review, the applications of graphene oxide (GO), reduce graphene oxide (rGO), and graphene-based nanocomposites (GNCs) for the removal of various metals are analyzed. Firstly, the common synthesis routes for GO, rGO, and GNCs are discussed. Secondly, the available literature on the adsorption of heavy metals including arsenic, lead, cadmium, nickel, mercury, chromium and copper using graphene-based materials are reviewed and analyzed. The adsorption isotherms, kinetics, capacity, and removal efficiency for each metal on different graphene materials, as well as the effects of the synthesis method and the adsorption process conditions on the recyclability of the graphene materials, are discussed. Finally, future perspectives and trends in the field are also highlighted.

Removal of heavy metals in aquatic environment by graphene oxide composites: a review

As the most important graphene derivate, graphene oxide (GO) is a high-efficient adsorbent for the removal of heavy metals in aquatic environment due to its abundant oxygen functional groups, enormous specific area, and strong hydrophilia. However, there are some drawbacks, such as easily aggregating and difficult separation, restricting the environmental application of GO. GO is not a suitable adsorbent by itself. Hence, some materials were used to synthesize GO composites, and GO composites are commonly characterized by high adsorption capacity to overcome the above drawbacks. This review discusses five main GO composites-GO-chitosan, GO-alginate, GO-SiO₂, NZVI-rGO, and magnetic GO composites-and summarizes the synthesis methods of GO composites and its application for the removal of heavy metals in aquatic environments. The influencing factors, adsorption capacities, and mechanisms related to the removal of heavy metals by GO composites are highlighted. Lastly, the application potentials and challenges of GO composites for aqueous environmental remediation are discussed. Graphical abstract.

Adsorptive and Reductive Removal of Chlorophenol from Wastewater by Biomass-Derived Mesoporous Carbon-Supported Sulfide Nanoscale Zerovalent Iron

Chlorinated compounds in a water environment pose serious threats to humanity. A nanoscale zerovalent iron (nZVI) has desirable properties for water dichlorination, but its reactivity is still limited by agglomeration and oxidation. In this study, the mesoporous carbon (MC) derived from biomass waste was prepared for immobilizing nZVI, and the nZVI@MC was further modified by sulfur (S-nZVI@MC) to relieve surface oxidation. The synergistic effect between nZVI and surface modification, the reaction conditions and the removal mechanism were investigated systematically. The characterization results showed nZVI was successfully loaded on the surface of MC, and the aggregation of nZVI was prevented. Moreover, sulfidation modification resulted in the formation of FeS on the surface of nZVI, which effectively alleviated surface oxidation of nZVI and promoted the electron transfer. Batch experiments demonstrated S-nZVI@MC had greatly enhanced reactivity towards 2,4,6-trichlorphenol (TCP) as compared to MC and nZVI, and the removal rate could reach 100%, which was mainly attributed to the significant synergistic effect of MC immobilization and sulfidation modification. Furthermore, the TCP removal process was well described by a Langmuir adsorption model and pseudo-second-order model. The possible mechanism for enhanced removal of TCP is the fast adsorption onto S-nZVI@MC and effective reduction by S-nZVI. Therefore, with excellent reducing activity and antioxidation, S-nZVI@MC has the potential as a pollutant treatment.

Carboxylation as an effective approach to improve the adsorption performance of graphene materials for Cu2+ removal

Graphene materials are high-performance adsorbents for water and soil remediation, whose oxygen containing groups bind to metal ions intensely. In this study, we prepared carboxylated graphene oxide (GO-OCH₂COOH) sponge and investigated the adsorption behaviors of Cu²⁺ on it by both experimental and computational approaches. Carboxylation largely improved the adsorption capacity from 23.8mg/g for graphene oxide (GO) sponge to 93.8mg/g for GO-OCH₂COOH. The efficient adsorption was due to the strong interaction between Cu²⁺ and carboxyl groups (especially in -OCH₂COOH form) according to the density functional theory calculation, while epoxy and hydroxyl groups contributed lowly. The fast adsorption process was achieved within 30min, corresponding to a large k₂ value of pseudo-second order model (0.061mg/g/min). The adsorption was spontaneous and exothermic according to thermodynamics analyses. The binding strength of Cu²⁺ on GO-OCH₂COOH was so strong that pH and ionic strength had mild impact. The strong binding sites were not recyclable, but the weaker ones (more than 40%) could be regenerated by simple washing. Our results highlighted the importance of chemical design in graphene adsorbents and the potential of GO-OCH₂COOH in heavy metal fixation from water and soil.

Preparation of Biomass Activated Carbon Supported Nanoscale Zero-Valent Iron (Nzvi) and Its Application in Decolorization of Methyl Orange from Aqueous Solution

The nanoscale zero-valent iron (nZVI) has great potential to degrade organic polluted wastewater. In this study, the nZVI particles were obtained by the pulse electrodeposition and were loaded on the biomass activated carbon (BC) for synthesizing the composite material of BC-nZVI. The composite material was characterized by SEM-EDS and XRD and was also used for the decolorization of methyl orange (MO) test. The results showed that the 97.94% removal percentage demonstrated its promise in the remediation of dye wastewater for 60 min. The rate of MO matched well with the pseudo-second-order model, and the rate-limiting step may be a chemical sorption between the MO and BC-nZVI. The removal percentage of MO can be effectively improved with higher temperature, larger BC-nZVI dosage, and lower initial concentration of MO at the pH of 7 condition.

Characterization of iron nanoparticles/reduced graphene oxide composites synthesized by one step eucalyptus leaf extract

Biosynthesis of nanoparticles using plant extract is one kind of the effective approach in developing rapid, clean, nontoxic, and eco-friendly technology. In this work, iron nanoparticles/reduced graphene oxide composites (Fe NPs/rGO) were facilely fabricated through one-step method with eucalyptus leaf extract. The synthesized Fe NPs/rGO was investigated by various characterization methods. SEM results disclosed that Fe NPs with regular spherical shape of 70 ± 10 nm was uniformly dispersed on rGO. A basal plane of rGO with high surface area, providing more load sites for Fe NPs, which was confirmed by TEM. XRD and FTIR results indicated that biomolecules from eucalyptus extract were capped on Fe NPs/rGO. The EDS mapping showed that Fe NPs dispersed evenly on rGO, and XPS further confirmed that Fe NPs/rGO composite was mainly comprised with Fe NPs and rGO. Furthermore, the biomolecules of eucalyptus leaf extract were identified by GC-MS to confirm that alcohol phenols acted as reducing agent, while alcohol acids and ketones acted as capping agents. In addition, the removal efficiency of Methylene blue (MB) up to 93% with Fe NPs/rGO. This work provides a simple, green cost-effective and environmentally friendly method to fabricate metal/rGO composite.

Environmental remediation of heavy metal ions by novel-nanomaterials: A review

Recently, novel-nanomaterials with excellent sorption capacities, mild stability, and environmental-friendly performance, have enabled massive developments in capturing heavy metal ions. This review firstly introduces the preparation and modification of novel-nanomaterials (e.g., MOFs, nZVI, MXenes, and g-C₃N₄). Then, the heavy metal ions' sorption properties and the impact of environmental conditions have been discussed. Subsequently, the sorption mechanisms are verified through batch experiments, spectral analysis, surface complexation models, and theoretical calculations. Finally, the applications prospects of novel-nanomaterials in removing heavy metal ion polluted water have also been discussed, which provide perspective for future in-depth research and practical applications.

Nanoscale zero-valent iron/magnetite carbon composites for highly efficient immobilization of U(VI)

Nanoscale zerovalent iron/magnetic carbon (NZVI/MC) composites were successfully synthesized by simply calcining yellow pine and iron precursors. NZVI/MC pyrolyzed at 800°C (NZVI/MC800) had a higher percentage of NZVI and displayed better resistance to aggregation and oxidation of NZVI than samples prepared at other temperatures. The NZVI/MC800 material was applied for the elimination of U(VI) from aqueous solutions. The results suggested that the NZVI/MC800 displayed excellent adsorption capacity (203.94 mg/g) toward U(VI). The significant adsorption capacity and fast adsorption kinetics were attributed to the presence of well-dispersed NZVI, which could quickly reduce U(VI) into U(IV), trapping the guest U(IV) in the porous biocarbon matrix. The removal of U(VI) on the NZVI/MC samples was strongly affected by solution pH. The NZVI/MC samples also displayed outstanding reusability for U(VI) removal after multiple cycles. These findings indicate that NZVI/MC has great potential for remediation of wastewater containing U(VI).

Magnetic graphene oxide-nano zero valent iron (GO-nZVI) nanohybrids synthesized using biocompatible cross-linkers for methylene blue removal

GO and nZVI have been used for removing different contaminants from aqueous solution; however, difficulty in the separation of GO, and the aggregation propensity of nZVI particles prevent them from having efficient practical applications. In this study, a green synthesis method was performed to prepare nanohybrids of GO and nZVI to provide an adsorbent with high adsorption efficiency that can be removed from aqueous solution easily by magnetic separation. GO-nZVI nanohybrids were synthesized by using biocompatible cross linkers named 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The effect of the nZVI ratio in the synthesized nanohybrids was studied at three different ratios of GO : nZVI, 1 : 1, 1 : 5 and 1 : 10. SEM/EDS, HRTEM, STEM/EDS, XRD, Raman, FTIR, and TGA analyses were conducted to provide physical and chemical properties of the adsorbents. The performance of nZVI and GO-nZVI nanohybrids as an adsorbent have been studied for methylene blue (MB) removal from an aqueous solution with an initial concentration of 12 mg L-1 at adsorbent dosages of 0.1, 0.3, 0.5, and 1 mg mL-1. Results indicated that GO-nZVI (1 : 5) provided the highest MB removal (99.1%) by using 10 mL of the 1 mg mL-1 adsorbent. After regeneration of the GO-nZVI (1 : 5) nanohybrids with ethanol, 84.3%, 67.2%, and 63.0% of MB removal were achieved in the first to third regeneration cycle. Results also showed that the GO-nZVI nanohybrids were not affected by aggregation compared to nZVI.

Evaluation of the colloidal stability and adsorption performance of reduced graphene oxide-elemental silver/magnetite nanohybrids for selected toxic heavy metals in aqueous solutions

Reduced graphene oxide (rGO) hybridized with magnetite and/or elemental silver (rGO/magnetite, rGO/silver, and rGO/magnetite/silver) nanoparticles were evaluated as potential adsorbents for toxic heavy metal ions (Cd (II), Ni(II), Zn(II), Co(II), Pb(II), and Cu(II)). Although the deposition of iron oxide and silver nanoparticles on the rGO nanosheets played an inhibitory role in metal ion adsorption, the metal adsorption efficiency by the nanohybrids (NHs) was still higher than that reported for many other sorbents (e.g., activated biochar, commercial resins, and nanosized hydrated Zr(IV) oxide particles). X-ray photoelectron spectroscopy analyses revealed that complexation with deprotonated adsorbents and cation exchange was an important mechanism for Cd(II) ion removal by the rGO and NHs. Competitive adsorption tests using multi metals showed that the adsorption affinity of metal ions on the rGO and its NHs follows the order (Cu(II), Zn(II)) > Ni(II) > Co(II) > (Pb(II), Cd(II)), which is similar to the order observed for single-metal adsorption experiments. These results can be explained by the destabilization abilities of the rGO and NHs, as well as the ionic radii of the considered metal ions. Our findings demonstrate the feasibility of using rGO-based NHs as highly efficient adsorbents for heavy metal removal from water.

Artificial Intelligence Based Optimization for the Se(IV) Removal from Aqueous Solution by Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron Composites

Highly promising artificial intelligence tools, including neural network (ANN), genetic algorithm (GA) and particle swarm optimization (PSO), were applied in the present study to develop an approach for the evaluation of Se(IV) removal from aqueous solutions by reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) composites. Both GA and PSO were used to optimize the parameters of ANN. The effect of operational parameters (i.e., initial pH, temperature, contact time and initial Se(IV) concentration) on the removal efficiency was examined using response surface methodology (RSM), which was also utilized to obtain a dataset for the ANN training. The ANN-GA model results (with a prediction error of 2.88%) showed a better agreement with the experimental data than the ANN-PSO model results (with a prediction error of 4.63%) and the RSM model results (with a prediction error of 5.56%), thus the ANN-GA model was an ideal choice for modeling and optimizing the Se(IV) removal by the nZVI/rGO composites due to its low prediction error. The analysis of the experimental data illustrates that the removal process of Se(IV) obeyed the Langmuir isotherm and the pseudo-second-order kinetic model. Furthermore, the Se 3d and 3p peaks found in XPS spectra for the nZVI/rGO composites after removing treatment illustrates that the removal of Se(IV) was mainly through the adsorption and reduction mechanisms.

Polymer-based nanocomposites for heavy metal ions removal from aqueous solution: a review

A review of versatile polymer-based composites containing different functional organic and/or inorganic counterparts for the removal of hazardous metal ions from wastewater solutions.

Macroscopic and spectroscopic studies of the enhanced scavenging of Cr(VI) and Se(VI) from water by titanate nanotube anchored nanoscale zero-valent iron

Herein, a promising titanate nanotubes (TNT) anchored nanoscale zero-valent iron (NZVI) nanocomposite (NZVI/TNT) was synthesized, characterized and used for the enhanced scavenging of Cr(VI) and Se(VI) from water. The structural identification indicated that NZVI was uniformly loaded on TNT, thereby, the oxidation and aggregation of NZVI was significantly minimized. The macroscopic experimental results indicated that NZVI/TNT exhibited higher efficiency as well as rate on Cr(VI) and Se(VI) scavenging resulted from the good synergistic effect between adsorption and reduction. Besides, TNT can weaken the inhibitory effect of co-existing humic acid (HA) and fulvic acid (FA) on the scavenging of Cr(VI) and Se(VI) by NZVI, since TNT showed strong adsorption for HA and FA that inhibit potential reactivity. XPS analysis suggested that surface-bound Fe(II) played a critical role in Cr(VI) and Se(VI) scavenging. XANES analysis demonstrated that TNT acted as a promoter for the almost complete transformation of Cr(VI) into Cr(III), and Se(VI) into Se(0)/Se(-II) in NZVI system. EXAFS analysis indicated that TNT acted as a scavenger for insoluble products, and thus more reactive sites can be used for Cr(VI) and Se(VI) reduction. The excellent performance of NZVI/TNT provide a potential material for purification and detoxification of Cr(VI) and Se(VI) from wastewater.