Water-resistant and high oxygen-barrier nanocellulose films with interfibrillar cross-linkages formed through multivalent metal ions

Electrodeposition of cellulose nanofibers as an efficient dehydration method

Dehydration of a cellulose nanofiber (CNF)/water dispersion requires large amounts of energy and time due to the high hydrophilicities and high specific surface areas of the CNFs. Various dehydration methods have been proposed for CNF/water dispersions; however, an efficient dehydration method for individually dispersed CNFs is needed. Here, electrodeposition of CNFs was evaluated as a dehydration method. Electrodeposition at a DC voltage of 10 V on a 0.2 wt% CNF/water dispersion resulted in a concentration of ∼1.58 wt% in 1 h. The dehydration energy efficiency was ∼300 times greater than that of dehydration by evaporation. The concentrated CNF hydrogels recovered after electrodeposition were redispersed with a simple neutralization process, and clear transparent films were obtained by drying after redispersion. This work provides a new method for dehydration and reuse of individually dispersed CNF/water dispersions and provides new insights into control of the hierarchical structures of CNFs by electrodeposition.

Cutting processability of metal-ion-containing cellulose nanofibril films by continuous wave laser

Understanding the cutting processability of cellulose nanofibril (CNF) films by continuous wave laser is important for precise shape processing that closely follows the design pattern. In this study, laser cutting of films made of surface-carboxylated CNFs with various counterionic species was performed to explore the factors that control the cutting processability. The cut width and the thermally affected width are mainly controlled by the laser irradiation energy per unit length. The processed cross section is tapered and rises above the film thickness. NMR analysis suggests that the pyrolysates contain water-soluble cello-oligosaccharides, the molecular weight of which varies with the type of CNF film. We consequently demonstrated that the COOH-type CNF film is preferable to the COONa-type CNF film for reducing the coloration residue and for processing the film into a shape that best follows the designed processing pattern.

Fabrication of flame-retardant and water-resistant nanopapers through electrostatic complexation of phosphorylated cellulose nanofibers and chitin nanocrystals

Biogenic, sustainable two-dimensional architectures, such as films and nanopapers, have garnered considerable interest because of their low carbon footprint, biodegradability, advanced optical/mechanical characteristics, and diverse potential applications. Here, bio-based nanopapers with tailored characteristics were engineered by the electrostatic complexation of oppositely charged colloidal phosphorylated cellulose nanofibers (P-CNFs) and deacetylated chitin nanocrystals (ChNCs). The electrostatic interaction between anionic P-CNFs and cationic ChNCs enhanced the stretchability and water stability of the nanopapers. Correspondingly, they exhibited a wet tensile strength of 17.7 MPa after 24 h of water immersion. Furthermore, the nanopapers exhibited good thermal stability and excellent self-extinguishing behavior, triggered by both phosphorous and nitrogen. These features make the nanopapers sustainable and promising structures for application in advanced fields, such as optoelectronics.

Cellulose Nanofibrils/Alginates Double-Network Composites: Effects of Interfibrillar Interaction and G/M Ratio of Alginates on Mechanical Performance

Interfibrillar phases and bonding in cellulose nanofibril (CNF)-based composites are crucial for materials performances. In this study, we investigated the influence of CNF surface characteristics, the guluronic acid/mannuronic acid ratio, and the molecular weight of alginates on the structure, mechanical, and barrier properties of CNF/alginate composite films. Three types of CNFs with varying surface charges and nanofibril dimensions were prepared from wood pulp fibers. The interfacial bonding through calcium ion cross-linking between alginate and carboxylated CNFs (TCNFs) led to significantly enhanced stiffness and strength due to the formation of an interpenetrating double network, compared to composites from alginates and CNFs with native negative or cationic surface charges. Various alginates extracted from Alaria esculenta (AE) and Laminaria hyperborea (LH) were also examined. The TCNF/AE composite, prepared from alginate with a high mannuronic acid proportion and high molecular weight, exhibited a Young's modulus of 20.3 GPa and a tensile strength of 331 MPa under dry conditions and a Young's modulus of 430 MPa and a tensile strength of 9.3 MPa at the wet state. Additionally, the TCNF/AE composite demonstrated protective properties as a barrier coating for fruit, significantly reducing browning of banana peels and weight loss of bananas stored under ambient conditions.

Dissolving-co-catalytic strategy for the preparation of flexible and wet-stable cellulose membrane towards biodegradable packaging

In the realization of the goal of circular economy, cellulose as one of sustainable biomass resources, have attracted much attention because of their abundant sources, biodegradability and renewability. However, the mechanical and waterproof performance of cellulose-based materials are usually not satisfying, which limits their high-value utilization. In this study, cellulose membrane with high-performance from the aspects of mechanical properties, water-resistance ability, oxygen barrier capacity and biodegradability, was prepared from bleached hardwood pulp (HBKP) in a AlCl3/ZnCl2/H2O solution. The AlCl3/ZnCl2/H2O acted as both solvent and catalyst to dissolve cellulose and facilitate the chemical crosslinking of epichlorohydrin (EPI) with cellulose, thus improved the overall performance of the obtained cellulose membrane. The addition sequence, amount and crosslinking time of EPI during chemical crosslinking had important effects on the properties of the membranes. When 7 wt% EPI was crosslinked for 24 h, the tensile stress reached 133 MPa and the strain reached 17 %. Moreover, the membrane had excellent oxygen insulation down to (1.1 ± 0.31) × 10-4 cm3/m2·d·Pa, and good water-resistance ability, no obvious swelling behavior after 450 days of immersion in distilled water. Furthermore, the membrane could be degraded by microorganisms in about 20 days. This cellulose-based membrane offers a sustainable and biodegradable packaging material.

Ozone-activated lignocellulose films blended with chitosan for edible film production

This work focuses on the influence of ozone pretreatment on the fractionation and solubilization of sugarcane bagasse and soda bagasse pulp fibers in sodium hydroxide/urea solution, as well as the application of regenerated cellulose for producing edible films. The methodology involved pretreating lignocelluloses with ozone for 20 to 120 min before dissolving in sodium hydroxide/urea solution. The influence of the pretreatment conditions on cellulose dissolution yield was investigated. Regenerated cellulose films were then formed, with and without the addition of 2 % chitosan. Mechanical, physical, structural, thermal, and antimicrobial attributes were determined as a function of ozonation conditions of raw materials and chitosan content. The findings exhibited positive effects of short ozonation on enhancing mechanical strength, cohesion, and hydrophobicity. The prolonged ozonation of 120 min demonstrated optimal improvements in continuity, swelling, and antibacterial resistance of obtained films. Incorporating chitosan enhanced tensile performance, stiffness, and vapor barriers but increased moisture absorption. Tailoring the activation of biomass through ozone pretreatment and chitosan addition resulted in renewable films with adjustable properties to meet diverse packaging requirements, particularly for fruit protective coatings, ensuring the preservation of post-harvest quality.

The Colloidal Properties of Nanocellulose

Nanocelluloses are anisotropic nanoparticles of semicrystalline assemblies of glucan polymers. They have great potential as renewable building blocks in the materials platform of a more sustainable society. As a result, the research on nanocellulose has grown exponentially over the last decades. To fully utilize the properties of nanocelluloses, a fundamental understanding of their colloidal behavior is necessary. As elongated particles with dimensions in a critical nanosize range, their colloidal properties are complex, with several behaviors not covered by classical theories. In this comprehensive Review, we describe the most prominent colloidal behaviors of nanocellulose by combining experimental data and theoretical descriptions. We discuss the preparation and characterization of nanocellulose dispersions, how they form networks at low concentrations, how classical theories cannot describe their behavior, and how they interact with other colloids. We then show examples of how scientists can use this fundamental knowledge to control the assembly of nanocellulose into new materials with exceptional properties. We hope aspiring and established researchers will use this Review as a guide.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

Facile preparation of cellulose/lignosulfonate derivatives composite films with high UV-shielding and gas barrier properties

Herein, a serial of full cellulose and lignosulfonate derivatives (LS), including sodium lignosulfonate (LSS), calcium lignosulfonate (LSC), lignosulfonic acid (LSA), composite films were generated through dissolving cellulose in reversible carbon dioxide (CO₂) ionic liquids solvent system (TMG/EG/DMSO/CO₂ solvent system), followed by a facile solution-gelation transition and absorption strategy. The findings indicated that LS aggregated and embedded inside the cellulose matrix via H-bond interaction. The cellulose/LS derivatives composite films showed good mechanical properties which the tensile strength reaches the maximum value of 94.7 MPa in MCC3LSS film. While for the MCC1LSS film, the breaking strain increases to 11.6 %. The outstanding UV shielding effect and high transmittance in the visible region of composite films were also achieved and the shielding performance of the whole UV region (200-400 nm) tended to 100 % for MCC5LSS film. In addition, thiol-ene click reaction was selected as model reaction to verify the UV-shielding performance. It was also found that the oxygen and water vapor barrier performances of composite films were evidently associated with the intense H-bond interaction and tortuous path effect. The OP and WVP of MCC5LSS film were 0 and 6 × 10^-3 g·μm/m²·day·kPa, respectively. These outstanding properties make them with great potential for packaging field.

Assembling nanocelluloses into fibrous materials and their emerging applications

Nanocelluloses, derived from various plants or specific bacteria, represent the renewable and sophisticated nano building blocks for emerging functional materials. Especially, the assembly of nanocelluloses as fibrous materials can mimic the structural organization of their natural counterparts to integrate various functions, thus holding great promise for potential applications in various fields, such as electrical device, fire retardance, sensing, medical antibiosis, and drug release. Due to the advantages of nanocelluloses, a variety of fibrous materials have been fabricated with the assistance of advanced techniques, and their applications have attracted great interest in the past decade. This review begins with an overview of nanocellulose properties followed by the historical development of assembling processes. There will be a focus on assembling techniques, including traditional methods (wet spinning, dry spinning, and electrostatic spinning) and advanced methods (self-assembly, microfluidic, and 3D printing). In particular, the design rules and various influencing factors of assembling processes related to the structure and function of fibrous materials are introduced and discussed in detail. Then, the emerging applications of these nanocellulose-based fibrous materials are highlighted. Finally, some perspectives, key opportunities, and critical challenges on future research trends within this field are proposed.

Acceleration of Wound Healing in Rats by Modified Lignocellulose Based Sponge Containing Pentoxifylline Loaded Lecithin/Chitosan Nanoparticles

Dressing wounds accelerates the re-epithelialization process and changes the inflammatory environment towards healing. In the current study, a lignocellulose sponge containing pentoxifylline (PTX)-loaded lecithin/chitosan nanoparticles (LCNs) was developed to enhance the wound healing rate. Lecithin/chitosan nanoparticles were obtained by the solvent-injection method and characterized in terms of morphology, particle size distribution, and zeta potential. The lignocellulose hydrogels were functionalized through oxidation/amination and freeze-dried to obtain sponges. The prepared sponge was then loaded with LCNs/PTX to control drug release. The nanoparticle containing sponges were characterized using FTIR and SEM analysis. The drug release study from both nanoparticles and sponges was performed in PBS at 37 °C at different time points. The results demonstrated that PTX has sustained release from lignocellulose hydrogels. The wound healing was examined using a standard rat model. The results exhibited that PTX loaded hydrogels could achieve significantly accelerated and enhanced healing compared to the drug free hydrogels and the normal saline treatment. Histological examination of the healed skin confirmed the visual observations. Overall speaking, the in vivo assessment of the developed sponge asserts its suitability as wound dressing for treatment of chronic skin wounds.

Multivalent Metal Ion Cross-Linked Lignocellulosic Nanopaper with Excellent Water Resistance and Optical Performance

Cellulose nanopaper is an attractive film material exhibiting huge potential in various fields, while its terrible water stability greatly hinders practical applications. Previous efforts on addressing this issue usually sacrifice the sustainability or material performance of film. In this study, we report a high-performing lignocellulosic nanopaper with superior water resistance and excellent optical properties. The strategy involves preparing a lignin-containing cellulose nanopaper (LCNP) first, and then infiltrating metal ions into the film to build cross-linking interactions within the fiber networks. Owing to the coordination bonds formed between metal ions and lignocellulosic components, the resulting metal ions cross-linked LCNP (M⁺-LCNP) displays outstanding water resistance, including the highest wet mechanical strength of ∼52 MPa after immersing in water for 24 h, which retains nearly 47% of the dry mechanical strength of the film. The ultralow water uptake ratio of ∼35% also confirms it possesses a superior wet dimensional stability. Moreover, these nanopapers also showcase the desired optical performances, including both high visible transmittance (>85%) and total ultraviolet-blocking efficiency (>91%, only transmitting a little of UVA). Overall, this fully degradable film is a promising alternative to replacing conventional plastics that are applied in multiple areas.

Recent Advances in Chemically Modified Cellulose and Its Derivatives for Food Packaging Applications: A Review

The application of cellulose in the food packaging field has gained increasing attention in recent years, driven by the desire for sustainable products. Cellulose can replace petroleum-based plastics because it can be converted to biodegradable and nontoxic polymers from sustainable natural resources. These products have increasingly been used as coatings, self-standing films, and paperboards in food packaging, owing to their promising mechanical and barrier properties. However, their utilization is limited because of the high hydrophilicity of cellulose. With the presence of a large quantity of functionalities within pristine cellulose and its derivatives, these building blocks provide a unique platform for chemical modification via covalent functionalization to introduce stable and permanent functionalities to cellulose. A primary aim of chemical attachment is to reduce the probability of component leaching in wet and softened conditions and to improve the aqueous, oil, water vapor, and oxygen barriers, thereby extending its specific use in the food packaging field. However, chemical modification may affect the desirable mechanical, thermal stabilities and biodegradability exhibited by pristine cellulose. This review exhaustively reports the research progress on cellulose chemical modification techniques and prospective applications of chemically modified cellulose for use in food packaging, including active packaging.

Nanocellulose for Sustainable Water Purification

Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.

Advanced nanocellulose-based gas barrier materials: Present status and prospects

Nanocellulose based gas barrier materials have become an increasingly important subject, since it is a widespread environmentally friendly natural polymer. Previous studies have shown that super-high gas barrier can be achieved with pure and hierarchical nanocellulose films fabricated through simple suspension or layer-by-layer technique either by itself or incorporating with other polymers or nanoparticles. Improved gas barrier properties were observed for nanocellulose-reinforced composites, where nanocellulose partially impermeable nanoparticles decreased gas permeability effectively. However, for nanocellulose-based materials, the higher gas barrier performance is jeopardized by water absorption and shape deformation under high humidity conditions which is a challenge for maintaining properties in material applications. Thus, numerous investigations have been done to solve the problem of water absorption in nanocellulose-based materials. In this literature review, gas barrier properties of pure, layer-by-layer and composite nanocellulose films are investigated. The possible theoretical gas barrier mechanisms are described, and the prospects for nanocellulose-based materials are discussed.

Mechanical properties of cellulose nanofibril papers and their bionanocomposites: A review

Cellulose nanofibril (CNF) paper has various applications due to its unique advantages. Herein, we present the intrinsic mechanical properties of CNF papers, along with the preparation and properties of nanoparticle-reinforced CNF composite papers. The literature on CNF papers reveals a strong correlation between the intrafibrillar network structure and the resulting mechanical properties. This correlation is found to hold for all primary factors affecting mechanical properties, indicating that the performance of CNF materials depends directly on and can be tailored by controlling the intrafibrillar network of the system. The parameters that influence the mechanical properties of CNF papers were critically reviewed. Moreover, the effect on the mechanical properties by adding nanofillers to CNF papers to produce multifunctional composite products was discussed. We concluded this article with future perspectives and possible developments in CNFs and their bionanocomposite papers.

Plant Cellulose Nanofiber-Derived Structural Material with High-Density Reversible Interaction Networks for Plastic Substitute

Ubiquitous petrochemical-based plastics pose a potential threat to ecosystems. In response, bioderived and degradable polymeric materials are being developed, but their mechanical and thermal properties cannot compete with those of existing petrochemical-based plastics, especially those used as structural materials. Herein, we report a biodegradable plant cellulose nanofiber (CNF)-derived polymeric structural material with high-density reversible interaction networks between nanofibers, exhibiting mechanical and thermal properties better than those of existing petrochemical-based plastics. This all-green material has substantially improved flexural strength (∼300 MPa) and modulus (∼16 GPa) compared with those of existing petrochemical-based plastics. Its average thermal expansion coefficient is only 7 × 10^-6 K^-1, which is more than 10 times lower than those of petrochemical-based plastics, indicating its dimension is almost unchanged when heated, and thus, it has a thermal dimensional stability that is better than those of plastics. As a fully bioderived and degradable material, the all-green material offers a more sustainable high-performance alternative to petrochemical-based plastics.

Recovery of the Irreversible Crystallinity of Nanocellulose by Crystallite Fusion: A Strategy for Achieving Efficient Energy Transfers in Sustainable Biopolymer Skeletons*

Crystallites form a grain boundary or the inter-crystallite interface. A grain boundary is a structural defect that hinders the efficient directional transfer of mechanical stress or thermal phonons in crystal aggregates. We observed that grain boundaries within an aggregate of crystalline cellulose nanofibers (CNFs) were crystallized by enhancing their inter-crystallite interactions; multiple crystallites were coupled into single fusion crystals, without passing through a melting or dissolving state. Accordingly, the lowered crystallinity of CNFs, which has been considered irreversible, was recovered, and the thermal energy transfer in the aggregate was significantly improved. Other nanofibrous crystallites of chitin also showed a similar fusion phenomenon by enhancing the inter-crystallite interactions. Such crystallite fusion may naturally occur in biological structures with network skeletons of aggregated fibrillar crystallites having mechanical or thermal functions.

Nanoscale Ion Regulation in Wood-Based Structures and Their Device Applications

Ion transport and regulation are fundamental processes for various devices and applications related to energy storage and conversion, environmental remediation, sensing, ionotronics, and biotechnology. Wood-based materials, fabricated by top-down or bottom-up approaches, possess a unique hierarchically porous fibrous structure that offers an appealing material platform for multiscale ion regulation. The ion transport behavior in these materials can be regulated through structural and compositional engineering from the macroscale down to the nanoscale, imparting wood-based materials with multiple functions for a range of emerging applications. A fundamental understanding of ion transport behavior in wood-based structures enhances the capability to design high-performance ion-regulating devices and promotes the utilization of sustainable wood materials. Combining this unique ion regulation capability with the renewable and cost-effective raw materials available, wood and its derivatives are the natural choice of materials toward sustainability.

Emerging Nanocellulose Technologies: Recent Developments

Nanocelluloses have unique morphologies, characteristics, and surface nanostructures, and are prepared from abundant and renewable plant biomass resources. Therefore, expansion of the use of CO₂ -accumulating nanocelluloses is expected to partly contribute to the establishment of a sustainable society and help overcome current global environmental issues. Nanocelluloses can be categorized into cellulose nanonetworks, cellulose nanofibrils, and cellulose nanocrystals, depending on their morphologies. All of these materials are first obtained as aqueous dispersions. In particular, cellulose nanofibrils have homogeneous ≈3 nm widths and average lengths of >500 nm, and significant amounts of charged groups are present on their surfaces. Such charged groups are formed by carboxymethylation, C6-carboxylation, phosphorylation, phosphite esterification, xanthation, sulfate esterification, and C2/C3 dicarboxylation during the pretreatment of plant cellulose fibers before their conversion into cellulose nanofibrils via mechanical disintegration in water. These surface-charged groups in nanocelluloses can be stoichiometrically counterion-exchanged into diverse metal and alkylammonium ions, resulting in surface-modified nanocelluloses with various new functions including hydrophobic, water-resistant, catalytic, superdeodorant, and gas-separation properties. However, many fundamental and application-related issues facing nanocelluloses must first be overcome to enable their further expansion.

Iso- and Anisotropic Etching of Micro Nanofibrillated Cellulose Films by Sequential Oxygen and Nitrogen Gas Plasma Exposure for Tunable Wettability on Crystalline and Amorphous Regions

The surface of cellulose films, obtained from micro nanofibrillated cellulose produced with different enzymatic pretreatment digestion times of refined pulp, was exposed to gas plasma, resulting in a range of surface chemical and morphological changes affecting the mechanical and surface interactional properties. The action of separate and dual exposure to oxygen and nitrogen cold dielectric barrier discharge plasma was studied with respect to the generation of roughness (confocal laser and atomic force microscopy), nanostructural and chemical changes on the cellulose film surface, and their combined effect on wettability. Elemental analysis showed that with longer enzymatic pretreatment time the wetting response was sensitive to the chemical and morphological changes induced by both plasma gases, but distinctly oxygen plasma was seen to induce much greater morphological change while nitrogen plasma contributed more to chemical modification of the film surface. In this novel study, it is shown that exposure to oxygen plasma, subsequently followed by exposure to nitrogen plasma, leads first to an increase in wetting, and second to more hydrophobic behaviour, thus improving, for example, suitability for printing using polar functional inks or providing film barrier properties, respectively.

Strong Foam-like Composites from Highly Mesoporous Wood and Metal-Organic Frameworks for Efficient CO2 Capture

Mechanical stability and multicycle durability are essential for emerging solid sorbents to maintain an efficient CO2 adsorption capacity and reduce cost. In this work, a strong foam-like composite is developed as a CO2 sorbent by the in situ growth of thermally stable and microporous metal-organic frameworks (MOFs) in a mesoporous cellulose template derived from balsa wood, which is delignified by using sodium chlorite and further functionalized by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation. The surface carboxyl groups in the TEMPO-oxidized wood template (TO-wood) facilitate the coordination of the cellulose network with multivalent metal ions and thus enable the nucleation and in situ growth of MOFs including copper benzene-1,3,5-tricarboxylate [Cu3(BTC)2], zinc 2-methylimidazolate, and aluminum benzene-1,3,5-tricarboxylate. The TO-wood/Cu3(BTC)2 composite shows a high specific surface area of 471 m2 g-1 and a high CO2 adsorption capacity of 1.46 mmol g-1 at 25 °C and atmospheric pressure. It also demonstrates high durability during the temperature swing cyclic CO2 adsorption/desorption test. In addition, the TO-wood/Cu3(BTC)2 composite is lightweight but exceptionally strong with a specific elastic modulus of 3034 kN m kg-1 and a specific yield strength of 68 kN m kg-1 under the compression test. The strong and durable TO-wood/MOF composites can potentially be used as a solid sorbent for CO2 capture, and their application can possibly be extended to environmental remediation, gas separation and purification, insulation, and catalysis.

High-Oxygen-Barrier Multilayer Films Based on Polyhydroxyalkanoates and Cellulose Nanocrystals

This study reports on the development and characterization of organic recyclable high-oxygen-barrier multilayer films based on different commercial polyhydroxyalkanoate (PHA) materials, including a blend with commercial poly(butylene adipate-co-terephthalate) (PBAT), which contained an inner layer of cellulose nanocrystals (CNCs) and an electrospun hot-tack adhesive layer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from cheese whey (CW). As a result, the full multilayer structures were made from bio-based and/or compostable materials. A characterization of the produced films was carried out in terms of morphological, optical, mechanical, and barrier properties with respect to water vapor, limonene, and oxygen. Results indicate that the multilayer films exhibited a good interlayer adhesion and contact transparency. The stiffness of the multilayers was generally improved upon incorporation of the CNC interlayer, whereas the enhanced elasticity of the blend was reduced to some extent in the multilayer with CNCs, but this was still much higher than for the neat PHAs. In terms of barrier properties, it was found that 1 µm of the CNC interlayer was able to reduce the oxygen permeance between 71% and 86%, while retaining the moisture and aroma barrier of the control materials.

Aqueous Modification of Chitosan with Itaconic Acid to Produce Strong Oxygen Barrier Film

In this study, the chemical modification of chitosan using itaconic acid as a natural-based unsaturated dicarboxylic acid was investigated. In an aqueous environment, the amine group of chitosan reacts with itaconic acid to produce a chitosan derivative with pyrrolidone-4-carboxylic acid group. On the basis of the elemental analysis, 15% of the amine groups of chitosan reacted, thus creating modified chitosan with amine and carboxylic acid functionalities. Due to the presence of amine and carboxylic acid groups, the surface charge properties of the chitosan were notably altered after itaconic acid modification. In an aqueous solution, the modified chitosan exhibited zwitterionic properties, being cationic at low pH and turning anionic when the pH was increased over 6.5, whereas the original chitosan remained cationic until pH 9. Furthermore, it was demostrated that the modified chitosan was suitable for the preparation of a self-standing film with similarly high transparency but notably higher mechanical strength and oxygen barrier properties compared to a film made from the original chitosan. In addition, the thermal stability of the modified chitosan film was higher than that of the original chitosan film, and the modified chitosan exhibited flame-retardant properties.

Protective coating of strawberries with cellulose nanofibers

Since shelf life of perishable foods is short, a compelling challenge is to prolong the freshness of foods with a cost-effective strategy. A perishable fruit, the strawberry, is chosen as a model perishable food and an edible film coating is applied to it using carboxymethylated cellulose nanofibers (CM-CNFs) stabilized by cationic salts. A transparent and impermeable CM-CNF film is formed at the strawberry surface using a dip coating process. The formation of the film is dependent on the electrostatic interaction between anionic CM-CNF and salt cations. Physical properties of the film are characterized and the effectiveness of edible film coating on the freshness of perishable fruit is evaluated by the measurement of weight loss, CO₂ release, firmness, total solid sugar and acidity. Cellulose nanofiber is a promising cost-effective material appropriate for use as an edible coating that contributes to the long-term storage and prolonged freshness of foods.

Double-crosslinked cellulose nanofiber based bioplastic films for practical applications

While green bioplastic based on carbohydrate polymers have showed considerable promise, the methods typically used to prepare them in a single material have remained a significant challenge. In this study, a simple approach is proposed to fabricate high performance cellulose films composed of chemically and physically dual-crosslinked 2,2,6,6-tetramethylpiperidine-1-oxy-oxidized cellulose nanofibers (DC TEMPO-CNFs). The hydroxyl groups of TEMPO-CNF suspensions were firstly crosslinked chemically with epichlorohydrin (ECH), and subsequently TEMPO-CNF matrices were crosslinked physically via the strong electrostatic interaction between carboxylate and Ca²⁺ ions. It was found that the optimized DC TEMPO-CNF films exhibit a good transmittance (90 %) and a high tensile strength (303 MPa). Furthermore, these DC TEMPO-CNF films revealed superior thermal stability and excellent water resistance compared to neat TEMPO-CNF films without crosslinked domains. We believe that these results will pave the way to preparing practical polysaccharide bioplastics with simple, environmentally-friendly manufacturing processes.

Investigating the adsorption of anisotropic diblock copolymer worms onto planar silica and nanocellulose surfaces using a quartz crystal microbalance

We report physical adsorption of highly anisotropic copolymer worms with either anionic or cationic charge onto planar silica, cellulose nanocrystal or cellulose nanofibril surfaces using a quartz crystal microbalance with dissipation monitoring.

Bacterial nanocellulose papers with high porosity for optimized permeance and rejection of nm-sized pollutants

Access to clean potable water is increasingly becoming a struggle for whole humankind, thus water treatment to remediate wastewater and fresh water sources is an important task. Pollutants in the nanoscale, such as viruses and macromolecules, are usually removed by means of membrane filtration processes, predominantly nanofiltration or ultrafiltration. Cellulose nanopapers, prepared from renewable resources and manufactured by papermaking, have recently been demonstrated to be versatile alternatives to polymer membranes in this domain. Unfortunately, so far nanopaper filters suffer from limited permeance and thus efficiency. We here present nanopapers made from bacterial cellulose dispersed in water or different types of low surface tension organic liquids (alcohol, ketone, ether) through a simple papermaking process. Nanopapers prepared from organic liquids (BC-org) exhibited 40 times higher permeance, caused by a lower paper density hence increased porosity, compared to conventional nanopapers produced from aqueous dispersions, ultimately enhancing the efficiency of bacterial cellulose nanopaper membranes. Despite their higher porosity, BC-org nanopapers still have pore sizes of 15-20 nm similar to BC nanopapers made from aqueous dispersions, thus enabling removal of contaminants the size of viruses by a size-exclusion mechanism at high permeance.

Favorable combination of foldability and toughness of transparent cellulose nanofibril films by a PET fiber-reinforced strategy

Transparent cellulose nanofibril (CNF) films have been considered a promising sustainable alternative for nonrenewable and nonbiodegradable petroleum-based plastic films. However, their relatively low toughness and poor folding endurance are two remaining challenges for commercial application. In this work, inspired by fiber-reinforced polymer, a transparent CNF film with favorable combination of toughness and folding endurance is demonstrated by a facile and scalable polyethylene terephthalate (PET) fiber-reinforced strategy. The as-prepared PET fiber-reinforced CNF film not only exhibits a maximum average toughness of 13.7 ± 2.4 MJ/m³ that is nearly 4 times stronger than that of pure CNF film (3.7 ± 1.1 MJ/m³), but also presents superior bending flexibility with a folding endurance of over 10⁴ times that is an order of magnitude higher than that of pure CNF film (~4 × 10³ times). Moreover, its underlying principle for the enhanced toughness and foldability is explored. This work provides a facile strategy to prepare tough yet foldable CNF film and could promote its industrial uses in the fields of energy storage devices, packaging, and electronic devices.

Research Progress and Development Demand of Nanocellulose Reinforced Polymer Composites

Nanocellulose is a type of nanomaterial with high strength, high specific surface area and high surface energy. Additionally, it is nontoxic, harmless, biocompatible and environmentally friendly and can be extracted from biomass resources. The surface groups of cellulose show high surface energy and binding activity on the nanoscale and can be modified by using various methods. Because nanocellulose has a high elastic modulus, rigidity and a low thermal expansion coefficient, it is an excellent material for polymer reinforcement. This paper summarizes the reinforcement mechanisms of nanocellulose polymer composites with a focus on the role of theoretical models in elucidating these mechanisms. Furthermore, the influence of various factors on the properties of nanocellulose reinforced polymer composites are discussed in combination with analyses and comparisons of specific research results in related fields. Finally, research focus and development directions for the design of high-performance nanocellulose reinforced polymer composites are proposed.

Coupled Effects of Fibril Width, Residual and Mechanically Liberated Lignin on the Flow, Viscoelasticity, and Dewatering of Cellulosic Nanomaterials

The rheological behavior of aqueous suspensions of lignocellulose nanofibrils (LCNFs) is investigated systematically by considering the coupled effect of residual lignin and LCNF morphology. The LCNF was obtained by high-energy fluidization of TEMPO-oxidized mechanical fibers, followed by size fractionation (fibril widths of ∼5, ∼9, and ∼18 nm). The nanofibril width and the corresponding fibril-fibril interactions are strongly influenced by the presence and distribution of lignin in the respective fractions, either retained on the fibril surface or as free structures present in the finest size fraction. All samples containing lignin display dilatancy, typifying gel suspensions with aggregated hydrophobic particles. Fine fractionated samples display strong gel behavior. The coarse fractionated sample, by contrast, shows a greater tendency to flocculate via entanglement and displays less gel-like characteristics; hence, it dewaters more freely.

Multivalent ion-induced re-entrant transition of carboxylated cellulose nanofibrils and its influence on nanomaterials' properties

In this work, we identify and characterize a new intriguing capability of carboxylated cellulose nanofibrils that could be exploited to design smart nanomaterials with tuned response properties for specific applications. Cellulose nanofibrils undergo a multivalent counter-ion induced re-entrant behavior at a specific multivalent metal salt concentration. This effect is manifested as an abrupt increase in the strength of the hydrogel that returns upon a further increment of salt concentration. We systematically study this phenomenon using dynamic light scattering, small-angle X-ray scattering, and molecular dynamics simulations based on a reactive force field. We find that the transitions in the nanofibril microstructure are mainly because of the perturbing actions of multivalent metal ions that induce conformational changes of the nanocellulosic chains and thus new packing arrangements. These new aggregation states also cause changes in the thermal and mechanical properties as well as wettability of the resulting films, upon water evaporation. Our results provide guidelines for the fabrication of cellulose-based films with variable properties by the simple addition of multivalent ions.

Antimicrobial Imperata cylindrica paper coated with anionic nanocellulose crosslinked with cationic ions

Recently, the interest in active packaging utilization has increased with population growth, food demand and new consumer trend like food delivery services. This new system, however, requires the use of additives to extend the food product quality and safety as well as in maintaining the shelf-life. This study was to prepare the antimicrobial paper from I. cylindrica coated anionic nanocellulose crosslinked cationic to create a system with the ability to actively control microbe growth in the packaging materials. The process involved pulping of I. cylindrica using semi-chemical and soda chemical method. The antimicrobial paper was prepared by printing the pulp suspension in 60 g/m² grammage in mold followed by the spray of anionic nanocellulose and subsequent soaking of the paper in cationic solution. The results showed the I. cylindrica paper coated anionic nanocellulose crosslinked with H⁺ and Al³⁺ cations were successfully produced. The paper produced was also observed to have antimicrobial activity against Gram-negative of E. coli and S. typhi as well as Gram-positive of S. aureus and B. subtilis bacteria. Furthermore, the best coating method was found on antimicrobial paper coated anionic nanocellulose crosslinked Al³⁺ as evidenced by smoother and compact surface structure.

Best Practice for Reporting Wet Mechanical Properties of Nanocellulose-Based Materials

Nanocellulose-based materials and nanocomposites show extraordinary mechanical properties with high stiffness, strength, and toughness. Although the last decade has witnessed great progress in understanding the mechanical properties of these materials, a crucial challenge is to identify pathways to introduce high wet strength, which is a critical parameter for commercial applications. Because of the waterborne fabrication methods, nanocellulose-based materials are prone to swelling by both adsorption of moist air or liquid water. Unfortunately, there is currently no best practice on how to take the swelling into account when reporting mechanical properties at different relative humidity or when measuring the mechanical properties of fully hydrated materials. This limits and in parts fully prevents comparisons between different studies. We review current approaches and propose a best practice for measuring and reporting mechanical properties of wet nanocellulose-based materials, highlighting the importance of swelling and the correlation between mechanical properties and volume expansion.