Bacterial polyhydroxyalkanoates: Still fabulous?

Promising non-model microbial cell factories obtained by genome reduction

The development of sustainable processes is the most important basis to realize the shift from the fossil-fuel based industry to bio-based production. Non-model microbes represent a great resource due to their advantageous traits and unique repertoire of bioproducts. However, most of these microbes require modifications to improve their growth and production capacities as well as robustness in terms of genetic stability. For this, genome reduction is a valuable and powerful approach to meet industry requirements and to design highly efficient production strains. Here, we provide an overview of various genome reduction approaches in prokaryotic microorganisms, with a focus on non-model organisms, and highlight the example of a successful genome-reduced model organism chassis. Furthermore, we discuss the advances and challenges of promising non-model microbial chassis.

Potential for curdlan recovery from aerobic granular sludge wastewater treatment systems - A review

The aerobic granular sludge (AGS) biotechnology has been explored for wastewater treatment for over two decades. AGS is gaining increased interest due to its enhanced treatment performance ability and the potential for resource recovery from AGS-based wastewater treatment systems. Resource recovery from AGS is a promising approach to sustainable wastewater treatment and attaining a circular economy in the wastewater management industry. Currently, research is at an advanced stage on recovering value-added resources such as phosphorus, polyhydroxyalkanoates, alginate-like exopolysaccharides, and tryptophan from waste aerobic granules. Recently, other value-added resources, including curdlan, have been identified in the aerobic granule matrix, and this may increase the sustainability of biotechnology in the wastewater industry. This paper provides an overview of AGS resource recovery potential. In particular, the potential for enhanced curdlan biosynthesis in the granule matrix and its recovery from AGS wastewater treatment systems is outlined.

Current trends in medium-chain-length polyhydroxyalkanoates: Microbial production, purification, and characterization

Polyhydroxyalkanoates (PHAs) have gained interest recently due to their biodegradability and versatility. In particular, the chemical compositions of medium-chain-length (mcl)-PHAs are highly diverse, comprising different monomers containing 6-14 carbon atoms. This review summarizes different feedstocks and fermentation strategies to enhance mcl-PHA production and briefly discusses the downstream processing. This review also provides comprehensive details on analytical tools for determining the composition and properties of mcl-PHA. Moreover, this study provides novel information by statistically analyzing the data collected from several reports on mcl-PHA to determine the optimal fermentation parameters (specific growth rate, PHA productivity, and PHA yield from various structurally related and unrelated substrates), mcl-PHA composition, molecular weight (MW), and thermal and mechanical properties, in addition to other relevant statistical values. The analysis revealed that the median PHA productivity observed in the fed-batch feeding strategy was 0.4 g L-1 h-1, which is eight times higher than that obtained from batch feeding (0.05 g L-1 h-1). Furthermore, 3-hydroxyoctanoate and -decanoate were the primary monomers incorporated into mcl-PHA. The investigation also determined the median glass transition temperature (-43°C) and melting temperature (47°C), which indicated that mcl-PHA is a flexible amorphous polymer at room temperature with a median MW of 104 kDa. However, information on the monomer composition or heterogeneity and the associated physical and mechanical data of mcl-PHAs is inadequate. Based on their mechanical values, the mcl-PHAs can be classified as semi-crystalline polymers (median crystallinity 23%) with rubber-like properties and a median elongation at break of 385%. However, due to the limited mechanical data available for mcl-PHAs with known monomer composition, identifying suitable processing tools and applications to develop mcl-PHAs further is challenging.

A Review of Current Achievements and Recent Challenges in Bacterial Medium-Chain-Length Polyhydroxyalkanoates: Production and Potential Applications

Using petroleum-derived plastics has contributed significantly to environmental issues, such as greenhouse gas emissions and the accumulation of plastic waste in ecosystems. Researchers have focused on developing ecofriendly polymers as alternatives to traditional plastics to address these concerns. This review provides a comprehensive overview of medium-chain-length polyhydroxyalkanoates (mcl-PHAs), biodegradable biopolymers produced by microorganisms that show promise in replacing conventional plastics. The review discusses the classification, properties, and potential substrates of less studied mcl-PHAs, highlighting their greater ductility and flexibility compared to poly(3-hydroxybutyrate), a well-known but brittle PHA. The authors summarize existing research to emphasize the potential applications of mcl-PHAs in biomedicine, packaging, biocomposites, water treatment, and energy. Future research should focus on improving production techniques, ensuring economic viability, and addressing challenges associated with industrial implementation. Investigating the biodegradability, stability, mechanical properties, durability, and cost-effectiveness of mcl-PHA-based products compared to petroleum-based counterparts is crucial. The future of mcl-PHAs looks promising, with continued research expected to optimize production techniques, enhance material properties, and expand applications. Interdisciplinary collaborations among microbiologists, engineers, chemists, and materials scientists will drive progress in this field. In conclusion, this review serves as a valuable resource to understand mcl-PHAs as sustainable alternatives to conventional plastics. However, further research is needed to optimize production methods, evaluate long-term ecological impacts, and assess the feasibility and viability in various industries.

PHA is not just a bioplastic!

Polyhydroxyalkanoates (PHA) have evolved into versatile biopolymers, transcending their origins as mere bioplastics. This extensive review delves into the multifaceted landscape of PHA applications, shedding light on the diverse industries that have harnessed their potential. PHA has proven to be an invaluable eco-conscious option for packaging materials, finding use in films foams, paper coatings and even straws. In the textile industry, PHA offers a sustainable alternative, while its application as a carbon source for denitrification in wastewater treatment showcases its versatility in environmental remediation. In addition, PHA has made notable contributions to the medical and consumer sectors, with various roles ranging from 3D printing, tissue engineering implants, and cell growth matrices to drug delivery carriers, and cosmetic products. Through metabolic engineering efforts, PHA can be fine-tuned to align with the specific requirements of each industry, enabling the customization of material properties such as ductility, elasticity, thermal conductivity, and transparency. To unleash PHA's full potential, bridging the gap between research and commercial viability is paramount. Successful PHA production scale-up hinges on establishing direct supply chains to specific application domains, including packaging, food and beverage materials, medical devices, and agriculture. This review underscores that PHA's future rests on ongoing exploration across these industries and more, paving the way for PHA to supplant conventional plastics and foster a circular economy.

Gas fermentation combined with water electrolysis for production of polyhydroxyalkanoate copolymer from carbon dioxide by engineered Ralstonia eutropha

A recycled-gas closed-circuit culture system was developed for safe autotrophic cultivation of a hydrogen-oxidizing, polyhydroxyalkanoate (PHA)-producing Ralstonia eutropha, using a non-combustible gas mixture with low-concentration of H2 supplied by water electrolysis. Automated feedback regulation of gas flow enabled input of H2, CO2, and O2 well balanced with the cellular demands, leading to constant gas composition throughout the cultivation. The engineered strain of R. eutropha produced 1.71 g/L of poly(3-hydroxybutyrate-co-12.5 mol% 3-hydroxyhexanoate) on a gas mixture of H2/CO2/O2/N2 = 4:12:7:77 vol% with a 69.2 wt% cellular content. Overexpression of can encoding cytosolic carbonic anhydrase increased the 3HHx fraction up to 19.6 mol%. The yields of biomass and PHA on input H2 were determined to be 72.9 % and 63.1 %, corresponding to 51.0 % and 44.2 % yield on electricity, respectively. The equivalent solar-to-biomass/PHA efficiencies were estimated to be 2.1-3.8 %, highlighting the high energy conversion capability of R. eutropha.

Halomonas alkaliantarctica as a platform for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production from biodiesel-derived glycerol

Polyhydroxyalkanoates (PHAs) are biodegradable polyesters produced by a wide range of microorganisms, including extremophiles. These unique microorganisms have gained interest in PHA production due to their ability to utilise low-cost carbon sources under extreme conditions. In this study, Halomonas alkaliantarctica was examined with regards to its potential to produce PHAs using crude glycerol from biodiesel industry as the only carbon source. We found that cell dry mass concentration was not dependent on the applying substrate concentration. Furthermore, our data confirmed that the analysed halophile was capable of metabolising crude glycerol into poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer within 24 h of the cultivation without addition of any precursors. Moreover, crude glycerol concentration affects the repeat units content in the purified PHAs copolymers and their thermal properties. Nevertheless, a differential scanning calorimetric and thermogravimetric analysis showed that the analysed biopolyesters have properties suitable for various applications. Overall, this study described a promising approach for the valorisation of crude glycerol as a future strategy of industrial waste management to produce high value microbial biopolymers.

Marine biodegradation of tailor-made polyhydroxyalkanoates (PHA) influenced by the chemical structure and associated bacterial communities

Over recent years, biodegradable polymers have been proposed to reduce environmental impacts of plastics for specific applications. The production of polyhydroxyalkanoates (PHA) by using diverse carbon sources provides further benefits for the sustainable development of biodegradable plastics. Here, we present the first study evaluating the impact of physical, chemical and biological factors driving the biodegradability of various tailor-made PHAs in the marine environment. Our multidisciplinary approach demonstrated that the chemical structure of the polymer (i.e. the side chain size for short- vs. medium-chain PHA) which was intrinsically correlated to the physico-chemical properties, together with the specificity of the biofilm growing on plastic films (i.e., the associated 'plastisphere') were the main drivers of the PHA biodegradation in the marine environment.

Bioconversion of glycerol into polyhydroxyalkanoates through an atypical metabolism shift using Priestia megaterium during fermentation processes: A statistical analysis of carbon and nitrogen source concentrations

Polyhydroxyalkanoates (PHA) are bioplastics which are well known as intracellular energy storage compounds and are produced in a large number of prokaryotic species. These bio-based inclusions are biodegradable, biocompatible and environmental friendly. Industrial production of, short chain and medium chain length PHA, involves the use of microorganisms and their enzymes. Priestia megaterium previously known as Bacillus megaterium is a well-recognized bacterium for producing short chain length PHA. This study focuses to characterize this bacterium for the production of medium chain length PHA, and a novel blend of both types of monomers having enhanced properties and versatile applications. Statistical analyses and simulations were used to demonstrate that cell dry weight can be derived as a function of OD600 and PHA content. Optimization of growth conditions resulted in the maximum PHA production as: 0. 05 g. g-x. H-1, where the rate of PHA production was 0.28 g L-1. H-1 and PHA concentration was 4.94 g. L-1. This study also demonstrated FTIR to be a semi quantitative tool for PHA production. Moreover, conversion of scl-PHA to mcl-PHA with reference to time intermissions using GC-FID are shown.

Feasibility of bioplastic production using micro- and macroalgae- A review

Plastic disposal and their degraded products in the environment are global concern due to its adverse effects and persistence in nature. To overcome plastic pollution and its impacts on environment, a sustainable bioplastic production using renewable feedstock's, such as algae, are envisioned. In this review, the production of polymer precursors such as polylactic acid, polyhydroxybutyrates, polyhydroxyalkanoates, agar, carrageenan and alginate from microalgae and macroalgae through direct conversion and fermentation routes are summarized and discussed. The direct conversion of algal biopolymers without any bioprocess (whole algal biomass used emphasizing zero waste discharge concept) favours economic feasibility. Whereas indirect method uses conversion of algal polymers to monomers after pretreatment followed by bioplastic precursor production by fermentation are emphasized. This review paper also outlines the current state of technological developments in the field of algae-based bioplastic, both in industry and in research, and highlights the creation of novel solutions for green bioplastic production employing algal polymers. Finally, the cost economics of the bioplastic production using algal biopolymers are clearly mentioned with future directions of next level bioplastic production. In this review study, the cost estimation was given at laboratory level bioplastic production using casting methods. Further development of bioplastics at pilot scale level may give clear economic feasibility of production at industry. Here, in this review, we emphasized the overview of algal biopolymers for different bioplastic product development and its economic value and also current industries involved in bioplastic production.

Polyhydroxyalkanoate production by the plant beneficial rhizobacterium Pseudomonas chlororaphis PCL1606 influences survival and rhizospheric performance

Pseudomonas chlororaphis PCL1606 (PcPCL1606) is a model rhizobacterium used to study beneficial bacterial interactions with the plant rhizosphere. Many of its beneficial phenotypes depend on the production of the antifungal compound 2-hexyl, 5-propyl resorcinol (HPR). Transcriptomic analysis of PcPCL1606 and the deletional mutant in HPR production ΔdarB strain, assigned an additional regulatory role to HPR, and allowed the detection of differentially expressed genes during the bacterial interaction with the avocado rhizosphere. Interestingly, the putative genes phaG (PCL1606_46820) and phaI (PCL1606_56560), with a predicted role in polyhydroxyalkanoate biosynthesis, were detected to be under HPR control. Both putative genes were expressed in the HPR-producing wild-type strain, but strongly repressed in the derivative mutant ΔdarB, impaired in HPR production. Thus, a derivative mutant impaired in the phaG gene was constructed, characterized and compared with the wild-type strain PcPCL1606 and with the derivative mutant ΔdarB. The phaG mutant had strongly reduced PHA production by PcPCL1606, and displayed altered phenotypes involved in bacterial survival on the plant roots, such as tolerance to high temperature and hydrogen peroxide, and decreased root survival, in a similar way that the ΔdarB mutant. On the other hand, the phaG mutant does not have altered resistance to desiccation, motility, biofilm formation or adhesion phenotypes, as displayed by the HPR-defective ΔdarB mutant have. Interestingly, the mutant defective in PHA production also lacked a biocontrol phenotype against the soilborne pathogenic fungus Rosellinia necatrix, even when the derivative mutant still produced the antifungal HPR compound, demonstrating that the final biocontrol phenotype of PcPCL1606 first requires bacterial survival and adaptation traits to the soil and rhizosphere environment.

TiO2 loaded on glycidol functionalized poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanobiocomposite film for photocatalytic and antibacterial activities

The rapid acceleration of industrialization and urbanization has exacerbated water pollution, which is primarily caused by the presence of highly toxic, non-biodegradable contaminants in industrial waste and effluents. In response to this urgent issue, a novel nanobiocomposite film with titanium dioxide (TiO2) loaded onto a poly(3-hydroxybutyrate-co-18 mol% 3-hydroxyhexanoate) (18PHBH) matrix was developed to serve as an effective dual-function material with photocatalytic and antibacterial properties. Through Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR), Diffuse reflectance ultraviolet-visible (DRUV-Vis), Scanning Electron Microscope (SEM), and X-ray diffraction (XRD) analyses, the physicochemical properties of the TiO2/Gly/18PHBH nanobiocomposite film were exhaustively characterized, revealing effective TiO2 loading and uniform distribution on the film's surface. The film exhibited extraordinary photocatalytic degradation of methylene blue (MB) dye, with the 5TiO2/Gly/18PHBH film demonstrating the greatest efficiency. In addition, antibacterial testing revealed that the film was effective against 99.8 % of Staphylococcus aureus and 96.9 % of Pseudomonas aeruginosa. These results demonstrate the potential of polyhydroxyalkanoate-based films as exceptional nanoparticle matrices and position the 5TiO2/Gly/18PHBH film as a versatile candidate for applications in photocatalysis and antibacterial interventions, providing innovative solutions to critical environmental challenges.

Pilot-scale production of mcl-PHA by Pseudomonas citronellolis using acetic acid as the sole carbon source

Medium-chain-length polyhydroxyalkanoates (mcl-PHA) are biobased materials with promising properties for environmentally friendly applications. Due to high production costs, which are related to the cost of the carbon sources combined with conversion insufficiencies, currently only small quantities are produced. This results in a lack of reliable data on properties and application potential for the variety of polymers from different types of production strains. This study investigated the potential for the production of mcl-PHA from volatile fatty acids (VFA) at a larger scale, given their potential as low-cost and sustainable raw material within a carboxylate-platform based biorefinery. Pseudomonas citronellolis (DSMZ 50332) was chosen as the production strain, and acetic acid was selected as the main carbon and energy source. Nitrogen was limited to trigger polymer production, and a fed-batch process using a pH-stat feeding regime with concentrated acid was established. We report successful production, extraction, and characterization of mcl PHA, obtaining a total of 1.76 kg from two 500-litre scale fermentations. The produced polymer was identified as a copolymer of 3-hydroxydecanoate (60.7%), 3-hydroxyoctanoate (37.3%), and 3-hydroxyhexanoate (2.0%) with a weight average molecular weight (Mw) of 536 kDa. NMR analysis indicates the presence of unsaturated side chains, which may offer additional possibilities for modification. The results confirm that there is a potential to produce significant amounts of mcl-PHA with interesting rubber-like properties from waste-derived VFA.

Production of polyhydroxyalkanoates as a feasible alternative for an integrated multiproduct lignocellulosic biorefinery

Polyhydroxyalkanoates (PHAs) are considered an alternative to fossil fuel-based plastics. However, in spite of their interesting properties and their multiple applications, PHAs have not taken off as an industrial development. The reason is mainly due to the associated high-production costs, which represent a significant constraint. In recent years, the interest in lignocellulosic biomass (LCB) derived from crop, forestry or municipal waste by-products has been growing, since LCB is plentiful, cheap, renewable and sustainable. On this matter, the valorization of LCB into PHAs represents a promising route within circular economy strategies. However, much effort still needs to be made to improve the bioconversion yields and to enhance PHA production efficiency. So, this review focuses on reviewing the different options for PHA synthesis from LCB, stressing the progress in biomass deconstruction, enzymatic hydrolysis and microbial conversion. In addition, some of the current biological strategies for improving the process of bioconversion are discussed.

Influence of Rheological and Morphological Characteristics of Polyhydroxybutyrate on Its Meltblown Process Behavior

Polyhydroxybutyrate (PHB) is a promising biopolymer. However, processing PHB in pure form in thermoplastic processes is limited due to its rapid degradation, very low initial crystallization rate, strong post-crystallization, and its low final stretchability. In this article, we screened commercial PHBs for morphological characteristics, rheological properties, and "performance" in the meltblown process in order to reveal process-relevant properties and overcome the shortcoming of PHB in thermoplastic processes for fiber formation. An evaluation of degradation (extruded (meltblown) material vs. granules) was performed via rheological and SEC analysis. The study revealed large differences in the minimum melt temperature (175 up to 200 °C) and the grade-dependent limitation of accessible throughput on a 500 mm plant. The average fiber diameter could be lowered from around 10 μm to 2.4 μm in median, which are the finest reported values in the literature so far. It was found that the determination of the necessary process temperature can be predicted well from the complex shear viscosity. Different to expectations, it became apparent that a broader initial molar mass distribution (>8) is suitable to overcome the state-of-the art limitations of PHAs in order to stabilize fiber formation, increase the productivity, and obtain better resistance towards thermal degradation in process. Accordingly, longer polymer chain fractions could be more affected by degradation than medium and short polymer chains in the distribution. Further, a low initial narrow distributed molar mass resulted in too brittle fabrics.

Genetic engineering of low-temperature polyhydroxyalkanoate production by Acidovorax sp. A1169, a psychrophile isolated from a subglacial outflow

In recent years, extremophilic microorganisms have been employed as producers of the microbial bioplastics polyhydroxyalkanoates (PHA), which are of great biotechnological value. Nevertheless, cold-loving or psychrophilic (cryophilic) bacteria have been neglected in this regard. Here, we present an investigation of the Arctic glacier-derived PHA producer Acidovorax sp. A1169. Biolog GEN III Microplates were used as a screening tool to identify the most suitable carbon substrate concerning PHA synthesis. The strain produced homopolymer poly(3-hydroxybutyrate) (PHB) most efficiently (2 g/L) at a temperature of 15 °C when supplied with fructose or mannitol as carbon sources with a substantial decrease of PHB biosynthesis at 17.5 °C. The PHB yield did not increase considerably or even decreased when carbon source concentration exceeded 10 g/L hinting that the strain is oligotrophic in nature. The strain was also capable of introducing 3-hydroxyvalerate (3HV) into the polymer structure, which is known to improve PHA thermoplastic properties. This is the first investigation providing insight into a PHA biosynthesis process by means of a true psychrophile, offering guidelines on polar-region bacteria cultivation, production of PHA and also on the methodology for genetic engineering of psychrophiles.

Polyhydroxyalkanoates: the natural biopolyester for future medical innovations

Polyhydroxyalkanoates (PHAs) are a family of natural microbial biopolyesters with the same basic chemical structure and diverse side chain groups. Based on their excellent biodegradability, biocompatibility, thermoplastic properties and diversity, PHAs are highly promising medical biomaterials and elements of medical devices for applications in tissue engineering and drug delivery. However, due to the high cost of biotechnological production, most PHAs have yet to be applied in the clinic and have only been studied at laboratory scale. This review focuses on the biosynthesis, diversity, physical properties, biodegradability and biosafety of PHAs. We also discuss optimization strategies for improved microbial production of commercial PHAs via novel synthetic biology tools. Moreover, we also systematically summarize various medical devices based on PHAs and related design approaches for medical applications, including tissue repair and drug delivery. The main degradation product of PHAs, 3-hydroxybutyrate (3HB), is recognized as a new functional molecule for cancer therapy and immune regulation. Although PHAs still account for only a small percentage of medical polymers, up-and-coming novel medical PHA devices will enter the clinical translation stage in the next few years.

Valorization of food waste derived anaerobic digestate into polyhydroxyalkanoate (PHA) using Thauera mechernichensis TL1

Polyhydroxyalkanoate (PHA) is a biopolymer that can be used as a bioplastic, offering a green alternative to petroleum-based plastics. In this study, we investigated PHA production using Thauera mechernichensis TL1. The optimal molar C/N ratio was determined to be 20 from among the ratios of 4, 20, 40, 80, and 200 and in the absence of nitrogen. Food waste anaerobic digestate, mainly comprised of acetate and propionate, was used as the carbon source for PHA production by T. mechernichensis TL1, resulting in a maximum PHA content of 23.98 ± 0.52 wt% (0.52 ± 0.02 g/L PHA) with a PHA productivity of 0.043 g/L-h PHA. In addition, when using acetate and propionate, T. mechernichensis TL1 produced PHA with a maximum PHA content of 57.43 ± 2.84 wt% (2.04 ± 0.11 g/L PHA) and 50.94 ± 1.61 wt% (2.62 ± 0.16 g/L PHA), with a PHA productivity of 0.092 g/L-h PHA and 0.070 g/L-h PHA, respectively. Proton nuclear magnetic resonance spectroscopy (1H NMR) confirmed polyhydroxybutyrate (PHB) production using acetate as a carbon source, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) production using propionate or food waste anaerobic digestate as the carbon source. The whole-genome analysis of T. mechernichensis TL1 confirmed the existence of a PHA biosynthesis pathway, with the presence of phaA, phaB, phaC (Class I and Class II), and phaJ genes. This study was the first to demonstrate Thauera sp.'s ability to produce PHA from food waste anaerobic digestate, rendering it as a promising candidate for PHA-producing bacteria for the valorization of food waste.

Bioconversion of C1 feedstocks for chemical production using Pichia pastoris

Bioconversion of C1 feedstocks for chemical production offers a promising solution to global challenges such as the energy and food crises and climate change. The methylotroph Pichia pastoris is an attractive host system for the production of both recombinant proteins and chemicals from methanol. Recent studies have also demonstrated its potential for utilizing CO2 through metabolic engineering or coupling with electrocatalysis. This review focuses on the bioconversion of C1 feedstocks for chemical production using P. pastoris. Herein the challenges and feasible strategies for chemical production in P. pastoris are discussed. The potential of P. pastoris to utilize other C1 feedstocks - including CO2 and formate - is highlighted, and new insights from the perspectives of synthetic biology and material science are proposed.

Mitigating plastic pollution at sea: Natural seawater degradation of a sustainable PBS/PBAT marine rope

This paper evaluates the use of a PBS/PBAT biodegradable rope to reduce the environmental impact of fishing gear lost at sea. The study aims to better understand the degradation mechanisms that the rope and its monofilaments may encounter due to the long term exposure to seawater. The monofilaments were immersed in natural seawater for up to 18 months, and rope samples were also immersed to study aging at a larger scale and evaluate the ability of a modelling tool to predict initial and aged states of the rope. At low temperatures, no loss of properties was observed for the monofilament and rope. However, at higher temperatures, biodegradation and hydrolysis processes were observed, leading to a faster loss of properties in the monofilament compared to the rope. The modelling tool provided conservative predictions due to severe mechanical test conditions of aged monofilament and a degradation gradient within the rope structure.

One-pot treatment of Saccharophagus degradans for polyhydroxyalkanoate production from brown seaweed

The conventional production of polyhydroxyalkanoate (PHA) from waste biomass requires a pretreatment step (acid or alkali) for reducing sugar extraction, followed by bacterial fermentation. This study aims to find a greener approach for PHA production from brown seaweed. Saccharophagus degradans can be a promising bacterium for simultaneous reducing sugar and PHA production, bypassing the need for a pretreatment step. Cell retention cultures of S. degradans in membrane bioreactor resulted in approximately 4- and 3-fold higher PHA concentrations than batch cultures using glucose and seaweed as carbon sources, respectively. X-ray diffraction, Fourier transform infrared spectroscopy, and nuclear magnetic resonance results revealed identical peaks for the resulting PHA and standard poly(3-hydroxybutyrate). The developed one step process using cell retention culture of S. degradans could be a beneficial process for scalable and sustainable PHA production.

Polyhydroxyalkanoates (PHAs) synthesis and degradation by microbes and applications towards a circular economy

Overusing non-degradable plastics causes a series of environmental issues, inferring a switch to biodegradable plastics. Polyhydroxyalkanoates (PHAs) are promising biodegradable plastics that can be produced by many microbes using various substrates from waste feedstock. However, the cost of PHAs production is higher compared to fossil-based plastics, impeding further industrial production and applications. To provide a guideline for reducing costs, the potential cheap waste feedstock for PHAs production have been summarized in this work. Besides, to increase the competitiveness of PHAs in the mainstream plastics economy, the influencing parameters of PHAs production have been discussed. The PHAs degradation has been reviewed related to the type of bacteria, their metabolic pathways/enzymes, and environmental conditions. Finally, the applications of PHAs in different fields have been presented and discussed to induce comprehension on the practical potentials of PHAs.

Medium chain length polyhydroxyalkanoate produced from ethanol by Pseudomonas putida grown in liquid obtained from acidogenic digestion of organic municipal solid waste

Production of medium chain length polyhydroxyalkanoate (mcl-PHA) up to about 6 g.L^-1 was obtained by feeding ethanol to Pseudomonas putida growing in liquid obtained from acidogenic digestion of organic municipal solid waste. Washing the wet, heat-inactivated Pseudomonas cells at the end of the fermentation with ethanol obviated the need of drying the biomass and enabled the removal of contaminating lipids before solvent-mediated extraction of PHA. Using 'green' solvents, 90 to near 100% of the mcl-PHA was extracted and purities of 71-78% mcl-PHA were reached already by centrifugation and decantation without further filtration for biomass removal. The mcl-PHA produced in this way consists of 10-18% C8, 72-78% C10 and 8-12% C12 chains (entirely medium chain length), has a crystallinity and melting temperature of ∼13% and ∼49 °C, respectively, and is a stiff rubberlike, colourless material at room temperature.

Characterization of newly isolated thermotolerant bacterium Cupriavidus sp. CB15 from composting and its ability to produce polyhydroxyalkanoate from glycerol

BACKGROUND

This study aimed to isolate a novel thermotolerant bacterium that is capable of synthesizing polyhydroxyalkanoate from glycerol under high temperature conditions.

RESULTS

A newly thermotolerant polyhydroxyalkanoate (PHA) producing bacterium, Cupriavidus sp. strain CB15, was isolated from corncob compost. The potential ability to synthesize PHA was confirmed by detection of PHA synthase (phaC) gene in the genome. This strain could produce poly(3-hydroxybutyrate) [P(3HB)] with 0.95 g/L (PHA content 75.3 wt% of dry cell weight 1.24 g/L) using glycerol as a carbon source. The concentration of PHA was enhanced and optimized based on one-factor-at-a-time (OFAT) experiments and response surface methodology (RSM). The optimum conditions for growth and PHA biosynthesis were 10 g/L glycerol, 0.78 g/L NH₄Cl, shaking speed at 175 rpm, temperature at 45 °C, and cultivation time at 72 h. Under the optimized conditions, PHA production was enhanced to 2.09 g/L (PHA content of 74.4 wt% and dry cell weight of 2.81 g/L), which is 2.12-fold compared with non-optimized conditions. Nuclear magnetic resonance (NMR) analysis confirmed that the extracted PHA was a homopolyester of 3-hydyoxybutyrate.

CONCLUSION

Cupriavidus sp. strain CB15 exhibited potential for cost-effective production of PHA from glycerol.

Natural antimicrobial systems protected by complex polyhydroxyalkanoate matrices for food biopackaging applications - A review

Interest is growing in entrapping natural antimicrobial compounds (NACs) within polyhydroxyalkanoates (PHAs) to produce active food-biopackaging systems. PHAs are versatile polymeric macromolecules that can protect NAC activity by entrapment. This work reviews 75 original papers and 18 patents published in the last 11 years concerning PHAs as matrices for NACs to summarize the physicochemical properties, release, and antimicrobial activities of systems fabricated from PHAs and NACs (PHA/NAC systems). PHA/NAC systems have recently been used as active food biopackaging systems to inactivate foodborne pathogens and prolong food shelf life. PHAs protect NACs by increasing the degradation temperature of some NACs and decreasing their loss of mass when heated. Some NACs also transform the PHA/NAC systems into more thermostable, flexible, and resistant when interacting with PHAs while also improving the barrier properties of the systems. NAC release and activity are also prolonged when NACs are trapped within PHAs. PHA/NAC systems, therefore, represent ecologically friendly materials with promising applications.

Untargeted metabolomics elucidated biosynthesis of polyhydroxyalkanoate by mixed microbial cultures from waste activated sludge under different pH values

Waste activated sludge has been frequently used as mixed substrate to produce polyhydroxyalkanoate (PHA). However, insufficient research on microbial metabolism has led to difficulties in regulating PHA accumulation in mixed microbial cultures (MMCs). To explore the variation of functional genes during domestication and the effect of different pH conditions on metabolic pathways during PHA accumulation, MMCs were domesticated by adding acetate and propionate with aerobic dynamic feeding strategy for 60 days. As the domestication progressed, the microbial community diversity declined and PHA-producing bacteria, Brevundimonas, Dechloromonas and Hyphomonas, were enriched. Through bacterial function prediction by PICRUSt the gene rpoE involved in starvation resistance of bacteria was enriched after the domestication. The pH value of 8.5 was the best condition for PHA accumulation in MMCs, under which a maximum PHA content reached 23.50% and hydroxybutyric (HB)/hydroxyvaleric (HV) reached 2.22. Untargeted metabolomics analysis exhibited that pH conditions of 7 and 8.5 could promote the up-regulation of significant differential metabolites, while higher alkaline conditions caused the inhibition of metabolic activity. Functional annotation showed that pH condition of 8.5 significantly affected Pyrimidine metabolism, resulting in an increase in PHA production. Regarding the pathways of PHA biosynthesis, acetoacetate was found to be significant in the metabolism of hydroxybutyric, and the alkaline condition could restrain the conversion from hydroxybutyric (HB) to the acetoacetate to protect PHB accumulation in MMCs compared with neutral condition. Taken together, the present results can advance the fundamental understanding of metabolic function in PHA accumulation under different pH conditions.

Cost effective media optimization for PHB production by Bacillus badius MTCC 13004 using the statistical approach

Polyhydroxybutyrate (PHB) has significant potential for replacing non-biodegradable traditional plastic, which is responsible for several global environmental issues. The main problem with switching to bio-based alternatives for petrochemical plastics is the large price gap on the market. To overcome this problem, the present research was focused on the utilization of inexpensive substrates i.e. agricultural residues for cost-effective PHB production by endospore-forming bacteria Bacillus badius MTCC 13004. For efficient PHB production, Box-Behnken Design (BBD) was selected for media optimization and to observe the interactive effects of four variables i.e. pH, Na acetate, Banana peel, and mustard cake. PHB yield of 2.11 g/L was attained under optimized conditions compared to non-optimized conditions (0.72 g/L). FTIR spectra analysis of PHB extracted from Bacillus badius was found to be similar to commercial PHB. NMR data was also matched with the chemical shift signals CH, CH₂, and CH₃ of PHB. The melting temperature (Tm) and glass transition temperature (Tg) of PHB from Bacillus badius was found to be 165.14 and 2.68 °C, respectively. Further, PCR protocol was also designed to amplify key enzymes of the PHB synthesis pathway i.e. PHB synthase (phb C gene).

PHA-Based Bioplastic: a Potential Alternative to Address Microplastic Pollution

Petroleum-derived plastics are linked to a variety of growing environmental issues throughout their lifecycle, including emission of greenhouse gases, accumulation in terrestrial and marine habitats, pollution, among others. There has been a lot of attention over the last decade in industrial and research communities in developing and producing eco-friendly polymers to deal with the current environmental issues. Bioplastics preferably are a fast-developing family of polymeric substances that are frequently promoted as substitutes to petroleum-derived plastics. Polyhydroxyalkanoates (PHAs) have a number of appealing properties that make PHAs a feasible source material for bioplastics, either as a direct replacement of petroleum-derived plastics or as a blend with elements derived from natural origin, fabricated biodegradable polymers, and/or non-biodegradable polymers. Among the most promising PHAs, polyhydroxybutyrates (PHBs) are the most well-known and have a significant potential to replace traditional plastics. These biodegradable plastics decompose faster after decomposing into carbon dioxide, water, and inorganic chemicals. Bioplastics have been extensively utilized in several sectors such as food-processing industry, medical, agriculture, automobile industry, etc. However, it is also associated with disadvantages like high cost, uneconomic feasibility, brittleness, and hydrophilic nature. A variety of tactics have been explored to improve the qualities of bioplastics, with the most prevalent being the development of gas and water barrier properties. The prime objective of this study is to review the current knowledge on PHAs and provide a brief introduction to PHAs, which have drawn attention as a possible potential alternative to conventional plastics due to their biological origin, biocompatibility, and biodegradability, thereby reducing the negative impact of microplastics in the environment. This review may help trigger further scientific interest to thoroughly research on PHAs as a sustainable option to greener bioplastics.

Bioconversion of Used Transformer Oil into Polyhydroxyalkanoates by Acinetobacter sp. Strain AAAID-1.5

In this research, the utilisation of used transformer oil (UTO) as carbon feedstock for the production of polyhydroxyalkanoate (PHA) was targeted; with a view to reducing the environmental challenges associated with the disposal of the used oil and provision of an alternative to non-biodegradable synthetic plastic. Acinetobacter sp. strain AAAID-1.5 is a PHA-producing bacterium recently isolated from a soil sample collected in Penang, Malaysia. The PHA-producing capability of this bacterium was assessed through laboratory experiments in a shake flask biosynthesis under controlled culture conditions. The effect of some biosynthesis factors on growth and polyhydroxyalkanoate (PHA) accumulation was also investigated, the structural composition of the PHA produced by the organism was established, and the characteristics of the polymer were determined using standard analytical methods. The results indicated that the bacteria could effectively utilise UTO and produce PHA up to 34% of its cell dry weight. Analysis of the effect of some biosynthesis factors revealed that the concentration of carbon substrate, incubation time, the concentration of yeast extract and utilisation of additional carbon substrates could influence the growth and polymer accumulation in the test organism. Manipulation of culture conditions resulted in an enhanced accumulation of the PHA. The data obtained from GC-MS and NMR analyses indicated that the PHA produced might have been composed of 3-hydroxyoctadecanoate and 3-hydroxyhexadecanoate as the major monomers. The physicochemical analysis of a sample of the polymer revealed an amorphous elastomer with average molecular weight and polydispersity index (PDI) of 110 kDa and 2.01, respectively. The melting and thermal degradation temperatures were 88 °C and 268 °C, respectively. The findings of this work indicated that used transformer oil could be used as an alternative carbon substrate for PHA biosynthesis. Also, Acinetobacter sp. strain AAAID-1.5 could serve as an effective agent in the bioconversion of waste oils, especially UTO, to produce biodegradable plastics. These may undoubtedly provide a foundation for further exploration of UTO as an alternative carbon substrate in the biosynthesis of specific polyhydroxyalkanoates.

Poly-β-hydroxybutyrate alleviated diarrhea and colitis via Lactobacillus johnsonii biofilm-mediated maturation of sulfomucin

Maintainance of sulfomucin is a key end point in the treatment of diarrhea and inflammatory bowel disease (IBD). However, the mechanisms underlying the microbial sense to sulfomucin are poorly understood, and to date, there are no therapies targeting the secretion and maturation of sulfomucin in IBD. Herein, we biosynthesized poly-β-hydroxybutyrate (PHB) and found that PHB could alleviate inflammation caused by diarrhea and colitis by enhancing the differentiation of sulfomucin. Microbiota transplantation and clearance together demonstrate that PHB promoting sulfomucin is mediated by Lactobacillus johnsonii (L. johnsonii). Further studies revealed that PHB provides a favorable niche for L. johnsonii biofilm formation to resist disturbance and support its growth. L. johnsonii-biofilm alleviates colitis by regulating fucose residues to promote goblet cell differentiation and subsequent sulfomucin maturation. Importantly, PHB alleviates colitis by enhancing sulfomucin secretion and maturation in a L. johnsonii-dependent manner. PHB represents a class of guardians, acting as a safe probiotic-biofilm delivery system that significantly promotes probiotic proliferation. Altogether, this study adds weight to the possible role of probiotics and functional materials in the treatment of intestinal inflammation. The application of PHB and biofilm self-coating L. johnsonii carries high translational potential and may be of clinical relevance.

Biosynthesis and biodegradation of poly(3-hydroxybutyrate) from Priestia flexa; A promising mangrove halophyte towards the development of sustainable eco-friendly bioplastics

The protracted persistence of petrochemical plastics in the environment and their non-biodegradability impede the survival of living creatures. Recently, biopolymers are being thoroughly researched as a potential replacement for conventional plastics. This present study sought to locate Poly(3-hydroxybutyrate) synthesizing bacterial species prevalent in the mangrove ecosystem. Six halophilic bacterial isolates were obtained from the mangrove habitat, four isolates displayed superior cell dry weight as well as PHB accumulation. Isolate PMPHB5 showed the highest cell dry weight (4.92 ± 0.02 g/L), while the maximum PHA yield (80%) was found with PMPHB7. Hence, PMPHB7 was chosen for further optimization of carbon source wherein glucose demonstrated improved cell growth as well as PHB production. The characterization of the PHB granules was performed by FT-IR spectroscopy and FE-SEM EDX. The presence of characteristic elements in the sample was confirmed using EDX. Isolate PMPHB7 was further identified as Priestia flexa through 16S rRNA gene sequencing (GenBank accession number: ON362236) and a phylogenetic tree was constructed to reveal the molecular relationships of this organism with others. The solvent-cast biopolymer film was made to check the biodegradability of the extracted PHB. When buried in soil, it was found that the biopolymer film exhibited approximately 73% biodegradation after 21 days. Thus, the present study sheds light on the potential of mangrove-associated halophytes to efficiently produce PHB that is readily biodegradable in soil.

Valorization of wastewater to recover value-added products: A comprehensive insight and perspective on different technologies

In recent years, due to rapid globalization and urbanization, the demand for fuels, energy, water and nutrients has been continuously increasing. To meet the future need of the society, wastewater is a prominent and emerging source for resource recovery. It provides an opportunity to recover valuable resources in the form of energy, fertilizers, electricity, nutrients and other products. The aim of this review is to elaborate the scientific literature on the valorization of wastewater using wide range of treatment technologies and reduce the existing knowledge gap in the field of resource recovery and water reuse. Several versatile, resilient environmental techniques/technologies such as ion exchange, bioelectrochemical, adsorption, electrodialysis, solvent extraction, etc. are employed for the extraction of value-added products from waste matrices. Since the last two decades, valuable resources such as polyhydroxyalkanoate (PHA), matrix or polymers, cellulosic fibers, syngas, biodiesel, electricity, nitrogen, phosphorus, sulfur, enzymes and a wide range of platform chemicals have been recovered from wastewater. In this review, the aspects related to the persisting global water issues, the technologies used for the recovery of different products and/or by-products, economic sustainability of the technologies and the challenges encountered during the valorization of wastewater are discussed comprehensively.

Reconstruction and optimization of a Pseudomonas putida-Escherichia coli microbial consortium for mcl-PHA production from lignocellulosic biomass

The demand for non-petroleum-based, especially biodegradable plastics has been on the rise in the last decades. Medium-chain-length polyhydroxyalkanoate (mcl-PHA) is a biopolymer composed of 6–14 carbon atoms produced from renewable feedstocks and has become the focus of research. In recent years, researchers aimed to overcome the disadvantages of single strains, and artificial microbial consortia have been developed into efficient platforms. In this work, we reconstructed the previously developed microbial consortium composed of engineered Pseudomonas putida KT∆ABZF (p2-a-J) and Escherichia coli ∆4D (ACP-SCLAC). The maximum titer of mcl-PHA reached 3.98 g/L using 10 g/L glucose, 5 g/L octanoic acid as substrates by the engineered P. putida KT∆ABZF (p2-a-J). On the other hand, the maximum synthesis capacity of the engineered E. coli ∆4D (ACP-SCLAC) was enhanced to 3.38 g/L acetic acid and 0.67 g/L free fatty acids (FFAs) using 10 g/L xylose as substrate. Based on the concept of “nutrient supply-detoxification,” the engineered E. coli ∆4D (ACP-SCLAC) provided nutrient for the engineered P. putida KT∆ABZF (p2-a-J) and it acted to detoxify the substrates. Through this functional division and rational design of the metabolic pathways, the engineered P. putida-E. coli microbial consortium could produce 1.30 g/L of mcl-PHA from 10 g/L glucose and xylose. Finally, the consortium produced 1.02 g/L of mcl-PHA using lignocellulosic hydrolysate containing 10.50 g/L glucose and 10.21 g/L xylose as the substrate. The consortium developed in this study has good potential for mcl-PHA production and provides a valuable reference for the production of high-value biological products using inexpensive carbon sources.

Optimization of Growth Conditions to Enhance PHA Production by Cupriavidus necator

The accumulation of polyhydroxyalkanoates (PHAs) by microorganisms usually occurs in response to environmental stress conditions. Therefore, it is advantageous to choose two-step cultivation. The first phase is aimed at maximizing biomass production, and only in the second phase, after setting the suitable conditions, PHA production starts. The aim of this work was to optimize the composition of the minimal propagation medium used for biomass production of Cupriavidus necator DSM 545 using the response surface methodology (RSM). Based on the results from the search for optimization limits, the glucose concentration, the ammonium sulfate concentration and the phosphate buffer molarity were chosen as independent variables. The optimal values were found as follows: the glucose concentration 10.8 g/L; the ammonium sulfate concentration 0.95 g/L; and the phosphate buffer molarity 60.2 mmol/L. The predicted biomass concentration was 4.54 g/L, and the verified value was at 4.84 g/L. Although this work was primarily focused on determining the optimal composition of the propagation medium, we also evaluated the optimal composition of the production medium and found that the optimal glucose concentration was 6.7 g/L; the ammonium sulfate concentration 0.60 g/L; and the phosphate buffer molarity 20 mmol/L. The predicted PHB yield was 54.7% (w/w) of dry biomass, and the verified value was 49.1%.

Polyhydroxyalkanoate Decelerates the Release of Paclitaxel from Poly(lactic-co-glycolic acid) Nanoparticles

Biodegradable nanoparticles (NPs) are preferred as drug carriers because of their effectiveness in encapsulating drugs, ability to control drug release, and low cytotoxicity. Although poly(lactide co-glycolide) (PLGA)-based NPs have been used for controlled release strategies, they have some disadvantages. This study describes an approach using biodegradable polyhydroxyalkanoate (PHA) to overcome these challenges. By varying the amount of PHA, NPs were successfully fabricated by a solvent evaporation method. The size range of the NPS ranged from 137.60 to 186.93 nm, and showed zero-order release kinetics of paclitaxel (PTX) for 7 h, and more sustained release profiles compared with NPs composed of PLGA alone. Increasing the amount of PHA improved the PTX loading efficiency of NPs. Overall, these findings suggest that PHA can be used for designing polymeric nanocarriers, which offer a potential strategy for the development of improved drug delivery systems for sustained and controlled release.

Advances and trends in microbial production of polyhydroxyalkanoates and their building blocks

With the rapid development of synthetic biology, a variety of biopolymers can be obtained by recombinant microorganisms. Polyhydroxyalkanoates (PHA) is one of the most popular one with promising material properties, such as biodegradability and biocompatibility against the petrol-based plastics. This study reviews the recent studies focusing on the microbial synthesis of PHA, including chassis engineering, pathways engineering for various substrates utilization and PHA monomer synthesis, and PHA synthase modification. In particular, advances in metabolic engineering of dominant workhorses, for example Halomonas, Ralstonia eutropha, Escherichia coli and Pseudomonas, with outstanding PHA accumulation capability, were summarized and discussed, providing a full landscape of diverse PHA biosynthesis. Meanwhile, we also introduced the recent efforts focusing on structural analysis and mutagenesis of PHA synthase, which significantly determines the polymerization activity of varied monomer structures and PHA molecular weight. Besides, perspectives and solutions were thus proposed for achieving scale-up PHA of low cost with customized material property in the coming future.

A Review on Enhancing Cupriavidus necator Fermentation for Poly(3-hydroxybutyrate) (PHB) Production From Low-Cost Carbon Sources

In the context of a circular economy, bioplastic production using biodegradable materials such as poly(3-hydroxybutyrate) (PHB) has been proposed as a promising solution to fundamentally solve the disposal issue of plastic waste. PHB production techniques through fermentation of PHB-accumulating microbes such as Cupriavidus necator have been revolutionized over the past several years with the development of new strategies such as metabolic engineering. This review comprehensively summarizes the latest PHB production technologies via Cupriavidus necator fermentation. The mechanism of the biosynthesis pathway for PHB production was first assessed. PHB production efficiencies of common carbon sources, including food waste, lignocellulosic materials, glycerol, and carbon dioxide, were then summarized and critically analyzed. The key findings in enhancing strategies for PHB production in recent years, including pre-treatment methods, nutrient limitations, feeding optimization strategies, and metabolism engineering strategies, were summarized. Furthermore, technical challenges and future prospects of strategies for enhanced production efficiencies of PHB were also highlighted. Based on the overview of the current enhancing technologies, more pilot-scale and larger-scale tests are essential for future implementation of enhancing strategies in full-scale biogas plants. Critical analyses of various enhancing strategies would facilitate the establishment of more sustainable microbial fermentation systems for better waste management and greater efficiency of PHB production.

From Organic Wastes and Hydrocarbons Pollutants to Polyhydroxyalkanoates: Bioconversion by Terrestrial and Marine Bacteria

The use of fossil-based plastics has become unsustainable because of the polluting production processes, difficulties for waste management sectors, and high environmental impact. Polyhydroxyalkanoates (PHA) are bio-based biodegradable polymers derived from renewable resources and synthesized by bacteria as intracellular energy and carbon storage materials under nutrients or oxygen limitation and through the optimization of cultivation conditions with both pure and mixed culture systems. The PHA properties are affected by the same principles of oil-derived polyolefins, with a broad range of compositions, due to the incorporation of different monomers into the polymer matrix. As a consequence, the properties of such materials are represented by a broad range depending on tunable PHA composition. Producing waste-derived PHA is technically feasible with mixed microbial cultures (MMC), since no sterilization is required; this technology may represent a solution for waste treatment and valorization, and it has recently been developed at the pilot scale level with different process configurations where aerobic microorganisms are usually subjected to a dynamic feeding regime for their selection and to a high organic load for the intracellular accumulation of PHA. In this review, we report on studies on terrestrial and marine bacteria PHA-producers. The available knowledge on PHA production from the use of different kinds of organic wastes, and otherwise, petroleum-polluted natural matrices coupling bioremediation treatment has been explored. The advancements in these areas have been significant; they generally concern the terrestrial environment, where pilot and industrial processes are already established. Recently, marine bacteria have also offered interesting perspectives due to their advantageous effects on production practices, which they can relieve several constraints. Studies on the use of hydrocarbons as carbon sources offer evidence for the feasibility of the bioconversion of fossil-derived plastics into bioplastics.

Biomedical Applications of Polyhydroxyalkanoate in Tissue Engineering

Tissue engineering technology aids in the regeneration of new tissue to replace damaged or wounded tissue. Three-dimensional biodegradable and porous scaffolds are often utilized in this area to mimic the structure and function of the extracellular matrix. Scaffold material and design are significant areas of biomaterial research and the most favorable material for seeding of in vitro and in vivo cells. Polyhydroxyalkanoates (PHAs) are biopolyesters (thermoplastic) that are appropriate for this application due to their biodegradability, thermo-processability, enhanced biocompatibility, mechanical properties, non-toxicity, and environmental origin. Additionally, they offer enormous potential for modification through biological, chemical and physical alteration, including blending with various other materials. PHAs are produced by bacterial fermentation under nutrient-limiting circumstances and have been reported to offer new perspectives for devices in biological applications. The present review discusses PHAs in the applications of conventional medical devices, especially for soft tissue (sutures, wound dressings, cardiac patches and blood vessels) and hard tissue (bone and cartilage scaffolds) regeneration applications. The paper also addresses a recent advance highlighting the usage of PHAs in implantable devices, such as heart valves, stents, nerve guidance conduits and nanoparticles, including drug delivery. This review summarizes the in vivo and in vitro biodegradability of PHAs and conducts an overview of current scientific research and achievements in the development of PHAs in the biomedical sector. In the future, PHAs may replace synthetic plastics as the material of choice for medical researchers and practitioners.

Turning mannitol-rich agricultural waste to poly(3-hydroxybutyrate) with Cobetia amphilecti fermentation and recovery with methyl levulinate as a green solvent

The present study explored the use of mannitol and mannitol-rich agro-industrial wastes as substrates for PHB production by Cobetia amphilecti isolated from the green Ulva sp. seaweed. Cultivation of C. amphilecti on mannitol, celery, and olive leaves (OLs) waste led to 4.20, 6.00, and 5.16 g L^-1 of cell dry mass (CDM), 76.3, 25.5, and 12.0% of PHB content in CDM and 3.2, 1.53, and 0.62 g L^-1 of PHB concentration, respectively; which suggested that they can be exploited as carbon substrates for the production of PHB. Extraction of PHB from C. amphilecti cultures by solubilization in the green solvent methyl levulinate (ML) (2% w/w, 140 °C, 1 h) indicated that the recovery yield and purity of PHB are above 97 and 90% w/w, respectively. The use of ML could be an attractive method for the recovery of PHB when safe and non-toxic solvents are required.

Polyhydroxyalkanoate Production by Caenibius tardaugens from Steroidal Endocrine Disruptors

The α-proteobacterium Caenibius tardaugens can use estrogens and androgens as the sole carbon source. These compounds are steroidal endocrine disruptors that are found contaminating soil and aquatic ecosystems. Here, we show that C. tardaugens, which has been considered as a valuable biocatalyst for aerobic steroidal hormone decontamination, is also able to produce polyhydroxyalkanoates (PHA), biodegradable and biocompatible polyesters of increasing biotechnological interest as a sustainable alternative to classical oil-derived polymers. Steroid catabolism yields a significant amount of propionyl-CoA that is metabolically directed towards PHA production through condensation into 3-ketovaleryl-CoA, rendering a PHA rich in 3-hydroxyvalerate. To the best of our knowledge, this is the first report where PHAs are produced from steroids as carbon sources.

Bioprospecting and Molecular Identification of Used Transformer Oil-Degrading Bacteria for Bioplastics Production

One of the major impediments to the commercialization of biodegradable plastic is the high cost of substrate. Consequently, there is a continuous search for effective microorganisms and cheaper carbon substrates to reduce the high production cost. In this study, waste transformer oil-degrading bacteria were isolated from soil, wastewater, and sediment samples, using a mineral salt medium (MSM) supplemented with 1% waste transformer oil as the sole carbon source. The isolates were screened for polyhydroxyalkanoates (PHA) production using Nile red staining and fluorescence microscopy. PHA granules accumulation was confirmed using transmission electron microscopy. Oil degradation analysis was accomplished using solvent extraction and gravimetric methods whereas, the bacteria were identified using 16S DNA sequence homology. A total of 62 transformer oil-degrading bacteria were isolated, out of which 16 (26%) showed positive results for Nile red fluorescence microscopy. The identified organisms belong to four different taxonomic genera of Acinetobacter, Bacillus, Proteus, and Serratia. The percentage of oil degradation observed among the different isolates ranged between 19.58% and 57.51%. Analysis of the PHA extracted from the selected isolate revealed the presence of medium chain length polyhydroxyalkanoates (mcl-PHA). The findings of this work have further highlighted the diversity of the bacteria capable of utilizing waste streams such as waste transformer oil. Consequently, the isolates can be explored as agents of converting waste transformer oil into bioplastics.

Polyhydroxyalkanoates (PHAs) as Biomaterials in Tissue Engineering: Production, Isolation, Characterization

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible biopolymers. These biomaterials have grown in importance in the fields of tissue engineering and tissue reconstruction for structural applications where tissue morphology is critical, such as bone, cartilage, blood vessels, and skin, among others. Furthermore, they can be used to accelerate the regeneration in combination with drugs, as drug delivery systems, thus reducing microbial infections. When cells are cultured under stress conditions, a wide variety of microorganisms produce them as a store of intracellular energy in the form of homo- and copolymers of [R]—hydroxyalkanoic acids, depending on the carbon source used for microorganism growth. This paper gives an overview of PHAs, their biosynthetic pathways, producing microorganisms, cultivation bioprocess, isolation, purification and characterization to obtain biomaterials with medical applications such as tissue engineering.

Plastic accumulation during COVID-19: call for another pandemic; bioplastic a step towards this challenge?

Plastic pollution has become a serious transboundary challenge to nature and human health, with estimation of reports published - predicting a twofold increase in plastic waste by 2030. However, due to the COVID-19 pandemic, the excessive use of single-use plastics (including face masks, gloves and personal protective equipment) would possibly exacerbate such forecasts. The transition towards eco-friendly alternatives like bio-based plastics and new emerging sustainable technologies would be vital to deal with future pandemics, even though the use or consumption of plastics has greatly enhanced our quality of life; it is however critical to move towards bioplastics. We cannot deny the fact that bioplastics have some challenges and shortcomings, but still, it is an ideal option for opt. The circular economy is the need of the hour for waste management. Along with all these practices, individual accountability, corporate intervention and government policy are also needed to prevent us from moving from one crisis to the next. Only through cumulative efforts, we will be able to cope up with this problem. This article collected scattered information and data about accumulation of plastic during COVID-19 worldwide. Additionally, this paper illustrates the substitution of petroleum-based plastics with bio-based plastics. Different aspects are discussed, ranging from advantages to challenges in the way of bioplastics.