Toxicity of heavy metals in plants and animals and their uptake by magnetic iron oxide nanoparticles

To breathe or not to breathe: Inhalational exposure to heavy metals and related health risk

This study reviewed scientific literature on inhalation exposure to heavy metals (HMs) in various indoor and outdoor environments and related carcinogenic and non-carcinogenic risk. A systematic search in Web of Science, Scopus, PubMed, Embase, and Medline databases yielded 712 results and 43 articles met the requirements of the Population, Exposure, Comparator, and Outcomes (PECO) criteria. Results revealed that HM concentrations in most households exceeded the World Health Organization (WHO) guideline values, indicating moderate pollution and dominant anthropogenic emission sources of HMs. In the analyzed schools, universities, and offices low to moderate levels of air pollution with HMs were revealed, while in commercial environments high levels of air pollution were stated. The non-carcinogenic risk due to inhalation HM exposure exceeded the acceptable level of 1 in households, cafes, hospitals, restaurants, and metros. The carcinogenic risk for As and Cr in households, for Cd, Cr, Ni, As, and Co in educational environments, for Pb, Cd, Cr, and Co in offices and commercial environments, and for Ni in metros exceeded the acceptable level of 1 × 10-4. Carcinogenic risk was revealed to be higher indoors than outdoors. This review advocates for fast and effective actions to reduce HM exposure for safer breathing.

Decoration of dandelion-like manganese-doped iron oxide microflowers on plasma-treated biochar for alleviation of heavy metal pollution in water

Carbon-based biowaste incorporated with inorganic oxides as a composite is an enticing option to mitigate heavy metal pollution in water resources due to its more economical and efficient performance. With this in mind, we constructed manganese-doped iron oxide microflowers resembling the dandelion-like structure on the surface of cold plasma-treated carbonized rice husk (MnFe2O3/PCRH). The prepared composite exhibited 45% and 19% higher removal rates for Cu2+ and Cd2+, respectively than the pristine CRH. The MnFe2O3/PCRH composite was characterized using XRD, FTIR, FESEM, EDX, HR-TEM, XPS, BET, TGA, and zeta potential, while the adsorption capacities were investigated as a function of pH, time, and initial concentration in batch trials. As for the kinetics, the pseudo-second-order was the rate-limiting over the pseudo-first-order and Elovich model, demonstrating that the chemisorption process governed the adsorption of Cu2+ and Cd2+. Additionally, the maximum adsorption capacities of the MnFe2O3/PCRH were found to be 122.8 and 102.5 mg/g for Cu2+ and Cd2+, respectively. Based on thorough examinations by FESEM-EDS, FTIR, and XPS, the possible mechanisms for the adsorption can be ascribed to surface complexation by oxygen-containing groups, a dissolution-precipitation of the ions with -OH groups, electrostatic attraction between metal ions and the adsorbent's partially charged surface, coordination of Cu2+ and Cd2+ with π electrons by aromatic/graphitic carbon in the MnFe2O3/PCRH, and pore filling and diffusion. Lastly, the adsorption efficiencies were maintained at about 70% of its initial adsorption even after five adsorption-desorption cycles, displaying its remarkable stability and reusability.

Synthesis of carboxylated cellulose nanocrystal/ZnO nanohybrids using Oxytenanthera abyssinica cellulose and zinc nitrate hexahydrate for radical scavenging, photocatalytic, and antibacterial activities

The extremely low antioxidant, photocatalytic, and antibacterial properties of cellulose limit its application in the biomedical and environmental sectors. To improve these properties, nanohybrides were prepared by mixing carboxylated cellulose nanocrystals (CCNCs) and zinc nitrate hexahydrate. Data from FTIR, XRD, DLS, and SEM spectra showed that, ZnO nanoparticles, with a size ranging from 94 to 351 nm and the smallest nanoparticle size of 164.18 nm, were loaded onto CCNCs. CCNCs/ZnO1 nanohybrids demonstrated superior antibacterial, photocatalytic, and antioxidant performance. More considerable antibacterial activity was shown with a zone of inhibition ranging from 26.00 ± 1.00 to 40.33 ± 2.08 mm and from 31.66 ± 3.51 to 41.33 ± 1.15 mm against Gram-positive and Gram-negative bacteria, respectively. Regarding photodegradation properties, the maximum value (∼91.52 %) of photocatalytic methylene blue degradation was observed after 75 min exposure to a UV lamp. At a concentration of 125.00 μm/ml of the CCNC/ZnO1 nanohybrids sample, 53.15 ± 1.03 % DPPH scavenging activity was obtained with an IC50 value of 117.66 μm/ml. A facile, cost-effective, one-step synthesis technique was applied to fabricate CCNCs/ZnO nanohybrids at mild temperature using Oxytenanthera abyssinica carboxylated cellulose nanocrystals as biotemplate. The result showed that CCNCs/ZnO nanohybrids possess potential applications in developing advanced functional materials for dye removal and antibacterial and antioxidant applications.

Emerging insights into the impacts of heavy metals exposure on health, reproductive and productive performance of livestock

Heavy metals, common environmental pollutants with widespread distribution hazards and several health problems linked to them are distinguished from other toxic compounds by their bioaccumulation in living organisms. They pollute the food chain and threaten the health of animals. Biologically, heavy metals exhibit both beneficial and harmful effects. Certain essential heavy metals such as Co, Mn, Se, Zn, and Mg play crucial roles in vital physiological processes in trace amounts, while others like As, Pb, Hg, Cd, and Cu are widely recognized for their toxic properties. Regardless of their physiological functions, an excess intake of all heavy metals beyond the tolerance limit can lead to toxicity. Animals face exposure to heavy metals through contaminated feed and water, primarily as a result of anthropogenic environmental pollution. After ingestion heavy metals persist in the body for an extended duration and the nature of exposure dictates whether they induce acute or chronic, clinical or subclinical, or subtle toxicities. The toxic effects of metals lead to disruption of cellular homeostasis through the generation of free radicals that develop oxidative stress. In cases of acute heavy metal poisoning, characteristic clinical symptoms may arise, potentially culminating in the death of animals with corresponding necropsy findings. Chronic toxicities manifest as a decline in overall body condition scoring and a decrease in the production potential of animals. Elevated heavy metal levels in consumable animal products raise public health concerns. Timely diagnosis, targeted antidotes, and management strategies can significantly mitigate heavy metal impact on livestock health, productivity, and reproductive performance.

Phytohormones-mediated strategies for mitigation of heavy metals toxicity in plants focused on sustainable production

KEY MESSAGE

In this manuscript, authors reviewed and explore the information on beneficial role of phytohormones to mitigate adverse effects of heavy metals toxicity in plants. Global farming systems are seriously threatened by heavy metals (HMs) toxicity, which can result in decreased crop yields, impaired food safety, and negative environmental effects. A rise in curiosity has been shown recently in creating sustainable methods to reduce HMs toxicity in plants and improve agricultural productivity. To accomplish this, phytohormones, which play a crucial role in controlling plant development and adaptations to stress, have emerged as intriguing possibilities. With a particular focus on environmentally friendly farming methods, the current review provides an overview of phytohormone-mediated strategies for reducing HMs toxicity in plants. Several physiological and biochemical activities, including metal uptake, translocation, detoxification, and stress tolerance, are mediated by phytohormones, such as melatonin, auxin, gibberellin, cytokinin, ethylene, abscisic acid, salicylic acid, and jasmonates. The current review offers thorough explanations of the ways in which phytohormones respond to HMs to help plants detoxify and strengthen their resilience to metal stress. It is crucial to explore the potential uses of phytohormones as long-term solutions for reducing the harmful effects of HMs in plants. These include accelerating phytoextraction, decreasing metal redistribution to edible plant portions, increasing plant tolerance to HMs by hormonal manipulation, and boosting metal sequestration in roots. These methods seek to increase plant resistance to HMs stress while supporting environmentally friendly agricultural output. In conclusion, phytohormones present potential ways to reduce the toxicity of HMs in plants, thus promoting sustainable agriculture.

Assessing the quality of constructed technosols enabled holistic monitoring of ecological restoration

The soil quality index (SQI) serves as a general ecological restoration indicator, however, statistics approaches that accurately assess the minimum data set (MDS) for SQI remain susceptible. The present study aims to evaluate the short-term reclamation results at the Ferro-Carvão stream and propose a system for ecological restoration monitoring, by selecting influential attributes and indexing soil quality. We hypothesized that the reclamation activities at the Ferro-Carvão stream, referred to as the "Marco zero" (MZ) area, can bring its soil quality to levels comparable to those of the native area. We collected soil samples at 0-20 and 20-40 cm depths from transects of MZ and reference sites (R1 and R2). Principal component analysis showed the MDS for each soil depth. Permutational analysis of variance, in conjunction with Nonmetric Multidimensional Scaling, exposed relationships between transects of areas. An additive non-linear factorial algorithm allowed SQI assessment. The results indicated a similar soil quality between transects of areas at 0-20 cm depth, whereas a dissimilarity at 20-40 cm. To sum up, reclamation activities allowed MZ-constructed Technosol to present a soil quality similar to native areas. The soil quality assessment at both depths offered insights into reclamation activities' immediate and long-term impacts on the Ferro-Carvão stream. This robust framework effectively monitors ecological restoration progress and guides future efforts in post-mining and post-dam collapse sites.

Exogenous application of sulfur-rich thiourea (STU) to alleviate the adverse effects of cobalt stress in wheat

Heavy metal stress affects crop growth and yields as wheat (Triticum aestivum L.) growth and development are negatively affected under heavy metal stress. The study examined the effect of cobalt chloride (CoCl2) stress on wheat growth and development. To alleviate this problem, a pot experiment was done to analyze the role of sulfur-rich thiourea (STU) in accelerating the defense system of wheat plants against cobalt toxicity. The experimental treatments were, i) Heavy metal stress (a) control and (b) Cobalt stress (300 µM), ii) STU foliar applications; (a) control and (b) 500 µM single dose was applied after seven days of stress, and iii) Wheat varieties (a) FSD-2008 and (b) Zincol-2016. The results revealed that cobalt stress decreased chlorophyll a by 10%, chlorophyll b by 16%, and carotenoids by 5% while foliar application of STU increased these photosynthetic pigments by 16%, 15%, and 15% respectively under stress conditions as in contrast to control. In addition, cobalt stress enhances hydrogen peroxide production by 11% and malondialdehyde (MDA) by 10%. In comparison, STU applications at 500 µM reduced the production of these reactive oxygen species by 5% and by 20% by up-regulating the activities of antioxidants. Results have revealed that the activities of SOD improved by 29%, POD by 25%, and CAT by 28% under Cobalt stress. Furthermore, the foliar application of STU significantly increased the accumulation of osmoprotectants as TSS was increased by 23% and proline was increased by 24% under cobalt stress. Among wheat varieties, FSD-2008 showed better adaptation under Cobalt stress by showing enhanced photosynthetic pigments and antioxidant activities compared to Zincol-2016. In conclusion, the foliar-applied STU can alleviate the negative impacts of Cobalt stress by improving plant physiological attributes and upregulating the antioxidant defense system in wheat.

Smoke-water obtained via different biotics: a cost-effective and safer approach to biochemically sound banana ripening with prolonged shelf-life

This study was conducted to investigate the efficacy of smoke-water obtained from biotics, for example coconut shells, rice husk, and pine cones on banana ripening, and compared with calcium carbide. Bio-chemical composition and remarkable bactericidal effect towards ATCC cultures of Escherichia coli, Staphylococcus aureus, and Bacillus cereus discovered the biological safety of the smoke-water in all collected smoke-water samples. Further, inductively coupled plasma mass spectrometry (ICP-MS) was carried out to investigate heavy metals; however, no traces were found in all collected samples. Consequently, it is proposed that heavy metal-free smoke-water obtained from various biotics series might be employed as ultrasafe fruit ripening as compared to calcium carbide (CaC2) that was found with heavy metal traces.

Synthesis, structural, magnetic property, and Cd(II) adsorption behavior of Ca-substituted MgFe2O4 nanomaterials in aqueous solutions

In the present study, magnetic nanomaterials (Mg1-xCaxFe2O4, 0.0 ≤ x ≤ 0.8) were prepared via a simple sol-gel method. The samples were characterized using XRD, TEM, SEM, EDX, FTIR, BET, and VSM. The structural and magnetic properties of prepared nanomaterials (NMs) were investigated, and the adsorption capacity of Cd2+ from aqueous solution was evaluated via flame atomic absorption spectroscopy (AAS). The impact of several factors on Cd2+ adsorption such as contact time (1-60 min), pH (3-8), dose (0.003-0.03 g), and initial concentration of Cd2+ (5-60 mg L-1) has been assessed. The adsorption capacity of Cd2+ for the prepared NMs followed the pseudo-second order. Several isotherm models were analyzed, and the Langmuir model was found to be the best fit for NMs. Among as-prepared NMs, Mg0.8Ca0.2Fe2O4 (MCF2, cubic 97%, orthorhombic 3%, qe 100 mg g-1) and Mg0.2Ca0.8Fe2O4 (MCF8, cubic 18%, orthorhombic 83%, qe 90 mg g-1) samples exhibited the highest adsorption performance at conditions, viz., contact time 20 min, pH 7, NM dosage 3 mg, and ions at a concentration 60 mg l-1. Cd removal percentages were achieved 93 and 75 for MCF2 and MCF8, respectively. Overall, the prepared MCF2 and MCF8 NMs could be used as effective adsorbents to eliminate toxic Cd2+ from polluted aqueous solution.

Synthesis and characterization of bio-nanocomposite based on chitosan and CaCO3 nanoparticles for heavy metals removal

Water is a vital component of life; therefore, it is critical to have access to pure water for various life-sustaining activities including agriculture and human consumption. An eco-friendly nanocomposite based on chitosan (Cs) and nanomaterials (CaCO3-NPs) were combined to amalgamate the advantages of biopolymers and nanomaterials to overcome the problems of instability, poor mechanical properties, and low removal percentage of biopolymers. The as-prepared samples were characterized and were used for the removal of heavy metal from wastewater. X-ray diffractometer, Fourier transform infrared spectroscopy, and transmission electron microscope were used to distinguish the prepared absorbents. The absorption of the heavy metals by as-prepared samples was examined at different conditions. The kinetic and isotherm models of the adsorption process were also studied. The data showed that the removal percentages of Cd, Cu, Pb, Zn, Cr and Ni by the composite were 98.0, 94.8, 99.0, 97.9, 97.4 and 98.3 %, respectively. The kinetic and isothermal studies showed that the absorption of these metal ions by the samples obeyed a pseudo-second-order mechanism and Langmuir isotherm model, respectively. In addition, the maximum adsorption capacities of Cd, Cu, Pb, Zn, Cr, and Ni ions by as-prepared nanocomposite were 83.33, 47.84, 98.03, 89.28, 62.11, and 63.69 mg/g, respectively.

Effect of drought and soil heavy metal contamination on three maple species: a case study of Kastamonu University campus in Türkiye

This study investigated the effects of heavy metals and drought on tree drying in three maple species located in the Kastamonu Campus in northwestern Türkiye. Soil samples were taken from 0-30 cm depth under maple species, and some soil properties were analyzed. The standardized precipitation evapotranspiration index was calculated for the drought impression using 71 years of climate data. The severe drought has had its effect (1.516) since August 2020. There was an extreme drought in January and February 2021 (-2.032 and -2.076, respectively), and this drought effect lasted until August as a severe drought. Chromium concentration at maple species was almost twice higher than the Maximum Allowable Limit for Türkiye (> 100 mg kg-1). The highest nickel concentration was found under Acer pseudoplatanus (97.25 mg kg-1) and Acer negundo (108.13 mg kg-1). The sampling sites were nonsignificant for copper (p = 0.806), lead (p = 0.916), and zinc (p = 0.866) heavy metals. Phyllosticta minima and Phyllactinia marissallii were detected in maple trees. In conclusion, it is understood that drought and heavy metal accumulation (chromium, nickel) in the soil affect tree drying. Physiological drought was first seen in trees due to the lack of rainfall in 2020. Soils were contaminated with heavy metals, and finally, diseases were seen. These results show that adverse climate events due to global climate change will have a negative impact on the growth and development of maple species, as their severity is expected to increase in the next few years.

Nickel chloride generates cytotoxic ROS that cause oxidative damage in human erythrocytes

BACKGROUND

Nickel is a heavy metal that is regarded as a possible hazard to living organisms due to its toxicity and carcinogenicity. Nickel chloride (NiCl2), an inorganic divalent Ni compound, has been shown to cause oxidative stress in cells by altering the redox equilibrium. We have investigated the effect of NiCl2 on isolated human erythrocytes under in vitro condition.

METHODS

Isolated erythrocytes were treated with different concentrations of NiCl2 (25-500 µM) for 24 h at 37 ºC. Hemolysates were prepared and several biochemical parameters were analyzed in them.

RESULTS

Treatment of erythrocytes with NiCl2 enhanced the intracellular generation of reactive oxygen species (ROS). A significant increase in hydrogen peroxide levels and oxidation of proteins and lipids was also seen. This was accompanied by a reduction in levels of nitric oxide, glutathione, free amino groups and total sulfhydryl groups. NiCl2 treatment impaired both enzymatic and non-enzymatic defense systems, resulting in lowered antioxidant capacity and diminished ability of cells to quench free radicals and reduce metal ions. NiCl2 exposure also had an inhibitory effect on the activity of enzymes involved in pathways of glucose metabolism (glycolytic and pentose phosphate shunt pathways). Increased level of methemoglobin, which is inactive in oxygen transport, was also seen. The rate of heme breakdown increased resulting in the release of free iron. Exposure to NiCl2 led to considerable cell lysis, indicating damage to the erythrocyte membrane. This was supported by the inhibition of membrane bound enzymes and increase in the osmotic fragility of NiCl2 treated cells. NiCl2 treatment caused severe morphological alterations with the conversion of normal discocytes to echinocytes. All changes were seen in a NiCl2 concentration-dependent manner.

CONCLUSION

NiCl2 generates cytotoxic ROS in human erythrocytes which cause oxidative damage that can decrease the oxygen carrying capacity of blood and also lead to anemia.

Auxin homeostasis in plant responses to heavy metal stress

Expeditious industrialization and anthropogenic activities have resulted in large amounts of heavy metals (HMs) being released into the environment. These HMs affect crop yields and directly threaten global food security. Therefore, significant efforts have been made to control the toxic effects of HMs on crops. When HMs are taken up by plants, various mechanisms are stimulated to alleviate HM stress, including the biosynthesis and transport of auxin in the plant. Interestingly, researchers have noted the significant potential of auxin in mediating resistance to HM stress, primarily by reducing uptake of metals, promoting chelation and sequestration in plant tissues, and mitigating oxidative damage. Both exogenous administration of auxin and manipulation of intrinsic auxin status are effective strategies to protect plants from the negative consequences of HMs stress. Regulation of genes and transcription factors related to auxin homeostasis has been shown to be related to varying degrees to the type and concentration of HMs. Therefore, to derive the maximum benefit from auxin-mediated mechanisms to attenuate HM toxicities, it is essential to gain a comprehensive understanding of signaling pathways involved in regulatory actions. This review primarily emphases on the auxin-mediated mechanisms participating in the injurious effects of HMs in plants. Thus, it will pave the way to understanding the mechanism of auxin homeostasis in regulating HM tolerance in plants and become a tool for developing sustainable strategies for agricultural growth in the future.

Heavy-metal tolerant bacterial strains isolated from industrial sites and scrap yards in Kashmir, India

Heavy metal pollution has posed a severe danger to environmental stability due to its high toxicity and lack of biodegradability. The present study deals with the appraisement of tolerance shown by various bacteria in varied copper and iron concentrations. Among the 20 isolates, four isolates, GN2, SC5, SC8, and SC10, exhibiting more significant iron and copper tolerance, were selected and identified by 16 S ribosomal ribonucleic acid (rRNA) gene sequence analysis as Pantoea agglomerans strain GN2, Pantoea sp. strain SC5, Bacillus sp. strain SC8 and Priestia aryabhattaistrain SC10. The minimum inhibitory concentration of molecularly identified strains revealed that P. agglomerans strain GN2 showed tolerance to iron sulfate and copper sulfate upto 600 and 400 µg/mL, whereas Bacillus sp. SC8 (OQ202165) showed tolerance of 700 and 250 µg/mL were tolerant to iron sulfate and copper sulfate up to 700 and 150 µg/mL, respectively. Pantoea sp. strain SC5 showed significant tolerance to both heavy metals. The isolates were further studied for their ability to grow at varying temperatures and pH ranges. Most of the isolates showed optimal growth at 37°C and pH 7. However, Pantoea sp. SC5 was competent to have prominent growth at 45°C and pH 8.0. Microbial remediation, which is eco-friendly, has proven the most effective method for bioremediation of heavy metal-contaminated environments. Using heavy metal-resistant bacteria for microbial remediation of iron and copper-contaminated environments could be a viable and valuable strategy. These isolates could also be used to decontaminate heavy metal-polluted agricultural soils.

Challenges and Prospective of Enhancing Hydatid Cyst Chemotherapy by Nanotechnology and the Future of Nanobiosensors for Diagnosis

Hydatid cysts have been widely recognized for decades as a common medical problem that affects millions of people. A revolution in medical treatment may be on the prospect of nanotechnology enhancing chemotherapy against hydatid cysts. An overview of nanotechnology's impact on chemotherapeutics is presented in the current review. It discusses some of the challenges as well as some of the opportunities. The application of nanotechnology to enhance chemotherapy against hydatid cysts is what this review will explore. Nanotechnology is a critical component of delivering therapeutic agents with greater precision and efficiency and targeting hydatid cysts with better efficacy, and minimizing interference with surrounding tissue. However, there are biodistribution challenges, toxicity, and resistance problems associated with nanotherapeutics. Additionally, nanobiosensors are being investigated to enable the early diagnosis of hydatid cysts. A nanobiosensor can detect hydatid cysts by catching them early, non-invasively, rapidly, and accurately. The sensitivity and specificity of diagnostic tests can be enhanced with nanobiosensors because they take advantage of the unique properties of nanomaterials. By providing more precise and customized treatment options for hydatid cysts, nanotechnology may improve therapeutic options and strategies for diagnosing the disease. In conclusion, treatment with nanotechnology to treat hydatid cysts is potentially effective but presents many obstacles. Furthermore, nanobiosensors are being integrated into diagnostic techniques, as well as helping to diagnose patients earlier and more accurately.

Integrated Assessment of Pb(II) and Cu(II) Metal Ion Phytotoxicity on Medicago sativa L., Triticum aestivum L., and Zea mays L. Plants: Insights into Germination Inhibition, Seedling Development, and Ecosystem Health

Environmental pollution with heavy metals has become a problem of major interest due to the harmful effects of metal ions that constantly evolve and generate serious threats to both the environment and human health through the food chain. Recognizing the imperative need for toxicological assessments, this study revolves around elucidating the effects of Pb(II) and Cu(II) ions on three plant species; namely, Medicago sativa L., Triticum aestivum L., and Zea mays L. These particular species were selected due to their suitability for controlled laboratory cultivation, their potential resistance to heavy metal exposure, and their potential contributions to phytoremediation strategies. The comprehensive phytotoxicity assessments conducted covered a spectrum of critical parameters, encompassing germination inhibition, seedling development, and broader considerations regarding ecosystem health. The key metrics under scrutiny included the germination rate, the relative growth of root and stem lengths, the growth inhibition index, and the tolerance index. These accurately designed experiments involved subjecting the seeds of these plants to an array of concentrations of PbCl2 and CuCl2 solutions, enabling an exhaustive evaluation of the phytotoxic potential of these metal ions and their intricate repercussions on these plant species. Overall, this study provides valuable insights into the diverse and dynamic responses of different plant species to Pb(II) and Cu(II) metal ions, shedding light on their adaptability and resilience in metal-contaminated environments. These findings have important implications for understanding plant-metal interactions and devising phytoremediation strategies in contaminated ecosystems.

An integrated overview of metals contamination, source-specific risks investigation in coal mining vicinity soils

Heavy metals in soil are harmful to natural biodiversity and human health, and it is difficult to estimate the effects accurately. To reduce pollution and manage risk in coal-mining regions, it is essential to evaluate risks for heavy metals in soil. The present study reviews the levels of 21 metals (Nb, Zr, Ag, Ni, Na, K, Mg, Rb, Zn, Ca, Sr, As, Cr, Fe, Pb, Cd, Co, Hg, Cu, Mn and Ti) in soils around Barapukuria coal-mining vicinity, Bangladesh which were reported in literature. An integrated approach for risk assessments with the positive matrix factorization (PMF) model, source-oriented ecological and health hazards were applied for the study. The contents of Rb, Ca, Zn, Pb, As, Ti, Mn, Co, Ag, Zr, and Nb were 1.63, 1.10, 1.97, 14.12, 1.20, 3.13, 1.22, 3.05, 3.85, 5.48, and 7.21 times greater than shale value. About 37%, 67%, 12%, and 85% of sampling sites posed higher risks according to the modified contamination factor, Nemerow pollution index, Nemerow integrated risk index, and mean effect range median quotient, respectively. Five probable metal sources were computed, including industrial activities to coal mining (17%), agricultural activities (33%), atmospheric deposition (19%), traffic emission (16%), and natural sources (15%). Modified Nemerow integrated risk index reported that agricultural activities, industrial coal mining activities, and atmospheric deposition showed moderate risk. Health hazards revealed that cancer risk values computed by the PMF-HHR model with identified sources were higher than the standard value (1.0E-04) for children, adult male, and female. Agricultural activities showed higher cancer risks to adult male (39%) and children (32%) whereas traffic emission contributed to female (25%). These findings highlight the ecological and health issues connected to potential sources of metal contamination and provide useful information to policymakers on how to reduce such risks.

Zinc and nano zinc mediated alleviation of heavy metals and metalloids in plants: an overview

Heavy metals and metalloids (HMs) contamination in the environment has heightened recently due to increasing global concern for food safety and human livability. Zinc (Zn2+ ) is an important nutrient required for the normal development of plants. It is an essential cofactor for the vital enzymes involved in various biological mechanisms of plants. Interestingly, Zn2+ has an additional role in the detoxification of HMs in plants due to its unique biochemical-mediating role in several soil and plant processes. During any exposure to high levels of HMs, the application of Zn2+ would confer greater plant resilience by decreasing oxidative stress, maintaining uptake of nutrients, photosynthesis productivity and optimising osmolytes concentration. Zn2+ also has an important role in ameliorating HMs toxicity by regulating metal uptake through the expression of certain metal transporter genes, targeted chelation and translocation from roots to shoots. This review examined the vital roles of Zn2+ and nano Zn in plants and described their involvement in alleviating HMs toxicity in plants. Moving forward, a broad understanding of uptake, transport, signalling and tolerance mechanisms of Zn2+ /zinc and its nanoparticles in alleviating HMs toxicity of plants will be the first step towards a wider incorporation of Zn2+ into agricultural practices.

Assessment of Trace Metal Contaminants and Consumer Preference in Tomato Varieties Produced in Two Mining Communities of Nigeria

Tomato varieties (Solanum lycopersicum L) produced in areas prominent for mining activities contribute more deposits of metal contaminants. In turn, affects the quality and value of the products. Highlighting the level of metal contaminant in consumer's most preferred tomato variety is also necessary for health and well-being. This study specifically aimed to investigate, i) the variability between six metal contaminants in UTC, Yowlings, and Derica tomatoes; ii) we also explored the relationship between the metal contaminants and tomato quality, and lastly, we ascertained which socioeconomic factor specifically determined preference for a particular variety of the tomatoes. The metal contaminants examined and found present using ICP-OES were nickel (Ni), chromium (Cr), lead (Pb), arsenic (As), cadmium (Cd), and mercury (Hg). We found a good agreement between most of the analyte and the National Institute of Standards and Technology (NIST) Certified Reference Material 1573a (CRM 1573a) values. Although this study's recovery for the analyte was between 83.22% and 111.00%, we also found contrary to our prediction that Cr, Ni, and Cd concentrations were higher in Derica, UTC, and the Yowlings varieties during the rainy season. A two-way ANOVA between tomatoes and planting seasons was not statistically significant (P > 0.05) in contrast to the mixed model (GLMMs) analysis that indicated a significant (P < 0.05) relationship between lycopene concentration, size of tomatoes, and concentration of metals screened. We also found using a principle component analysis (PCA) and correlation matrix that the concentration of Pb in the tomato varieties was significantly related to the As level. Despite As and Cr concentrations being higher in the Derica tomato variety, most consumers preferred it. Derica tomato contained metal contaminants that could be harmful to human health. Therefore, there is need to monitor the production procedures involved prior to supply of the tomato product.

Biosorption Potential of Arachis hypogaea-Derived Biochar for Cd and Ni, as Evidenced through Kinetic, Isothermal, and Thermodynamics Modeling

Biochar derived from plant biomass has great potential for the decontamination of aqueous media. It is the need of the hour to test biochar derived from economical, easily available, and novel materials. In this regard, the present study provides insight into the sorption of two heavy metals, i.e., cadmium (Cd) and nickel (Ni), using native Arachis hypogaea and its biochar prepared through pyrolysis. The effect of different factors, including interaction time, initial concentration of adsorbate, and temperature, as well as sorbent dosage, was studied on the sorption of Cd and Ni through a batch experiment. Characterization of the native biowaste and prepared biochar for its surface morphology and functional group identification was executed using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). Results revealed the presence of different functional groups such as -OH on the surface of the adsorbent, which plays an important role in metal attachment. SEM reveals the irregular surface morphology of the adsorbent, which makes it easy for metal attachment. Thermogravimetric analysis shows the stability of A. hypogaea biochar up to 380 °C as compared with native adsorbent. The adsorption efficacy of A. hypogaea was found to be higher than that of native A. hypogaea for both metals. The best adsorption of Cd (94.5%) on biochar was observed at a concentration of 40 ppm, an adsorbent dosage of 2 g, a contact time of 100 min, and a temperature of 50 °C. While the optimum conditions for adsorption of Ni on biochar (97.2% adsorption) were reported at a contact time of 100 min, adsorbent dosage of 2.5 g, initial concentration of 60 ppm, and temperature of 50 °C. Results revealed that biochar offers better adsorption of metal ions as compared with raw samples at low concentrations. Isothermal studies show the adsorption mechanism as physical adsorption, and the negative value of Gibb's free energy confirms the spontaneous nature of the adsorption reaction. An increase in entropy value favors the adsorption process. Results revealed that the sorbent was a decent alternative to eliminate metal ions from the solution instead of costly adsorbents.

Hibiscus rosa-sinensis as a potential hyperaccumulator in metal contaminated magnesite mine tailings

Mining is one of the major contributors for land degradation and severe heavy metals based soil pollution. In this study, the physicochemical properties of magnesite mine soil was investigated and assess the optimistic and eco-friendly remediation approach with Hibiscus rosa-sinensis with the effect of pre-isolated Acidithiobacillus thiooxidans. The physicochemical properties analysis results revealed that most the parameter were either too less or beyond the permissible limits. The pre-isolated A. thiooxidans showed remarkable multi-metal tolerance up to 800 μg mL-1 concentration of Cr, Cd, Pb, and Mn. Heavy metal content in polluted soil was reduced to avoid more metal toxicity by diluting with fertile control soil as 80:20 and 60:40. The standard greenhouse experiment was performed to evaluate the phytoextraction potential of H. rosa-sinensis under the influence of A. thiooxidans in various treatment groups (G-I to G-V). The outcome of this investigation was declared that the multi-metal tolerant A. thiooxidans from G-III and G-II showed remarkable effect on growth and phytoextraction ability of H. rosa-sinensis on metal polluted magnesite mine soil in 180 d greenhouse study. These results suggested that the combination of H. rosa-sinensis and A. thiooxidans could be used as an excellent hyper-accumulator to extract metal pollution from polluted soil.

Dynamic crosstalk between silicon nanomaterials and potentially toxic trace elements in plant-soil systems

Agricultural soil pollution with potentially toxic trace elements (PTEs) has emerged as a significant environmental concern, jeopardizing food safety and human health. Although, conventional remediation approaches have been used for PTEs-contaminated soils treatment; however, these techniques are toxic, expensive, harmful to human health, and can lead to environmental contamination. Nano-enabled agriculture has gained significant attention as a sustainable approach to improve crop production and food security. Silicon nanomaterials (SiNMs) have emerged as a promising alternative for PTEs-contaminated soils remediation. SiNMs have unique characteristics, such as higher chemical reactivity, higher stability, greater surface area to volume ratio and smaller size that make them effective in removing PTEs from the environment. The review discusses the recent advancements and developments in SiNMs for the sustainable remediation of PTEs in agricultural soils. The article covers various synthesis methods, characterization techniques, and the potential mechanisms of SiNMs to alleviate PTEs toxicity in plant-soil systems. Additionally, we highlight the potential benefits and limitations of SiNMs and discusses future directions for research and development. Overall, the use of SiNMs for PTEs remediation offers a sustainable platform for the protection of agricultural soils and the environment.

Development and application of novel risk indices for assessing heavy metal pollution in aquatic sediments

This study presents the development of a new sediment individual risk index (SIRI) and sediment complex risk index (SCRI) to assess heavy metal pollution in Anzali Wetland sediments. SIRI incorporates total metal concentrations, bioavailability, and sediment quality guidelines. SCRI, derived through principal component analysis (PCA), integrates SIRI for a comprehensive risk assessment. The newly developed indices were systematically classified. Results showed varying risk levels with SIRI values of Zn, Cr, Cu, Pb, Ni, As, Cd, and Hg as 0.82, 1.32, 0.98, 0.71, 1.41, 1.37, 0.79, and 0.79, respectively. Pb, Cd, and Hg posed very low risk, Cu and Zn posed low risk, and Cr, Ni, and As posed moderate risk. SCRI yielded an index value of 1.02, indicating a moderate level of risk for the studied stations. Pearson correlation analysis validated SCRI with a highly significant and strong correlation coefficient (0.923) with metal bioavailability, serving as a risk indicator.

The Behavior of Polymeric Pipes in Drinking Water Distribution System-Comparison with Other Pipe Materials

The inner walls of the drinking water distribution system (DWDS) are expected to be clean to ensure a safe quality of drinking water. Complex physical, chemical, and biological processes take place when water comes into contact with the pipe surface. This paper describes the impact of leaching different compounds from the water supply pipes into drinking water and subsequent risks. Among these compounds, there are heavy metals. It is necessary to prevent these metals from getting into the DWDS. Those compounds are susceptible to impacting the quality of the water delivered to the population either by leaching dangerous chemicals into water or by enhancing the development of microorganism growth on the pipe surface. The corrosion process of different pipe materials, scale formation mechanisms, and the impact of bacteria formed in corrosion layers are discussed. Water treatment processes and the pipe materials also affect the water composition. Pipe materials act differently in the flowing and stagnation conditions. Moreover, they age differently (e.g., metal-based pipes are subjected to corrosion while polymer-based pipes have a decreased mechanical resistance) and are susceptible to enhanced bacterial film formation. Water distribution pipes are a dynamic environment, therefore, the models that are used must consider the changes that occur over time. Mathematical modeling of the leaching process is complex and includes the description of corrosion development over time, correlated with a model for the biofilm formation and the disinfectants-corrosion products and disinfectants-biofilm interactions. The models used for these processes range from simple longitudinal dispersion models to Monte Carlo simulations and 3D modeling. This review helps to clarify what are the possible sources of compounds responsible for drinking water quality degradation. Additionally, it gives guidance on the measures that are needed to maintain stable and safe drinking water quality.

Lead Toxicity-Mediated Growth and Metabolic Alterations at Early Seedling Stages of Maize (Zea mays L.)

To investigate the toxic effects of lead (Pb) on key metabolic activities essential for proper germination and seedling growth of maize seeds, experiments were carried out with different levels of Pb (0 to 120 mg of Pb L-1 as PbCl2) applied through growth medium to two maize hybrids H-3310S and H-6724. The research findings indicated that growth and metabolic activities were adversely affected by increased Pb contamination in growth medium; however, a slow increase in these parameters was recorded with increasing time from 0 to 120 h. Protease activity decreased with an increase in the level of Pb contamination but increased with time; consequently, a reduction in seed proteins and an increase in total free amino acids were observed with time. Similarly, α-amylase activity decreased with an increase in Pb concentration in growth medium while it increased with increasing time from 0 to 120 h; consequently, reducing and non-reducing sugars increased with time but decreased with exposure to lead. The roots of both maize hybrids had higher Pb contents than those of the shoot, which decreased the uptake of nitrogen, phosphorus, and potassium. All these nutrients are essential for optimal plant growth; therefore, the reduction in growth and biomass of maize seedlings could be due to Pb toxicity that altered metabolic processes, as sugar and amino acids are necessary for the synthesis of metabolic compounds, rapid cell division, and proper functioning of enzymes in the growing embryo, but all were dramatically reduced due to suppression of protease and α-amylase by toxicity of Pb. In general, hybrid H-3310S performed better in Pb-contaminated growth medium than H-6724.

Carbon nanomaterials for designing next-generation membranes and their emerging applications

Carbon nanomaterials have enormous applications in various fields, such as adsorption, membrane separation, catalysis, electronics, capacitors, batteries, and medical sciences. Owing to their exceptional properties, such as large specific surface area, carrier mobility, flexibility, electrical conductivity, and optical pellucidity, the family of carbon nanomaterials is considered as one of the most studied group of materials to date. They are abundantly used in membrane science for multiple applications, such as the separation of organics, enantiomeric separation, gas separation, biomolecule separation, heavy metal separation, and wastewater treatment. This study provides an overview of the significant studies on carbon nanomaterial-based membranes and their emerging applications in our membrane research journey. The types of carbon nanomaterials, their utilization in membrane-based separations, and the mechanism involved are summarized in this study. Techniques for the fabrication of different nanocomposite membranes are also highlighted. Lastly, we have provided an overview of the existing issues and future scopes of carbon nanomaterial-based membranes for technological perspectives.

Spatial dynamics of pH in the rhizosphere of Leersia hexandra Swartz at different chromium exposure

The roots of hyperaccumulators can significantly alter soil pH and thus change the chromium (Cr) availability in the rhizosphere. The pH dynamics in the rhizosphere of Cr hyperaccumulator Leersia hexandra Swartz remains unknown. In this study, the spatial dynamics of pH in the rhizosphere of L. hexandra at different Cr exposure were examined using planar optode (PO). The effects of different Cr concentrations on the biomass, physiological parameters, and soil enzyme activity were investigated. The results showed that pH in the rhizosphere of L. hexandra was highly heterogeneous and followed the root shape. There were obvious soil acidification in all groups and the average pH values in the control, Cr50, and Cr100 groups decreased by 0.26, 0.27, and 0.35 pH unit, respectively. At a certain concentration (50 mg kg-1), Cr significantly increased the plant height and biomass of L. hexandra compared to the control (p < 0.05). The concentrations of chlorophyll a, chlorophyll b, and total chlorophyll in the leaves increased with increasing Cr concentrations. The acid phosphatase, urease, and catalase activities in the rhizosphere were higher than those in the bulk soil. These results provide new insights into elucidating the hyperaccumulating mechanism of Cr and improving the phytoremediation efficiency.

Melatonin and strigolactone mitigate chromium toxicity through modulation of ascorbate-glutathione pathway and gene expression in tomato

Chromium (Cr) is considered one of the most hazardous metal contaminant reducing crop production and putting human health at risk. Phytohormones are known to regulate chromium stress, however, the function of melatonin and strigolactones in Chromium stress tolerance in tomato is rarely investigated. Here we investigated the potential role of melatonin (ML) and strigolactone (SL) on mitigating Chromium toxicity in tomato. With exposure to 300 μM Cr stress a remarkable decline in growth (63.01%), biomass yield (50.25)%, Pigment content (24.32%), photosynthesis, gas exchange and Physico-biochemical attributes of tomato was observed. Cr treatment also resulted in oxidative stress closely associated with higher H2O2 generation (215.66%), Lipid peroxidation (50.29%), electrolyte leakage (440.01%) and accumulation of osmolytes like proline and glycine betine. Moreover, Cr toxicity up-regulated the transcriptional expression profiles of antioxidant, stress related and metal transporter genes and down-regulated the genes related to photosynthesis. The application of ML and SL alleviated the Cr induced phytotoxic effects on photosynthetic pigments, gas exchange parameters and restored growth of tomato plants. ML and SL supplementation induced plant defense system via enhanced regulation of antioxidant enzymes, ascorbate and glutathione pool and transcriptional regulation of several genes. The coordinated regulation of antioxidant and glyoxalase systems expressively suppressed the oxidative stress. Hence, ML and SL application might be considered as an effective approach for minimizing Cr uptake and its detrimental effects in tomato plants grown in contaminated soils. The study may also provide new insights into the role of transcriptional regulation in the protection against heavy metal toxicity.

Toxicity of Heavy Metals and Recent Advances in Their Removal: A Review

Natural and anthropogenic sources of metals in the ecosystem are perpetually increasing; consequently, heavy metal (HM) accumulation has become a major environmental concern. Human exposure to HMs has increased dramatically due to the industrial activities of the 20th century. Mercury, arsenic lead, chrome, and cadmium have been the most prevalent HMs that have caused human toxicity. Poisonings can be acute or chronic following exposure via water, air, or food. The bioaccumulation of these HMs results in a variety of toxic effects on various tissues and organs. Comparing the mechanisms of action reveals that these metals induce toxicity via similar pathways, including the production of reactive oxygen species, the inactivation of enzymes, and oxidative stress. The conventional techniques employed for the elimination of HMs are deemed inadequate when the HM concentration is less than 100 mg/L. In addition, these methods exhibit certain limitations, including the production of secondary pollutants, a high demand for energy and chemicals, and reduced cost-effectiveness. As a result, the employment of microbial bioremediation for the purpose of HM detoxification has emerged as a viable solution, given that microorganisms, including fungi and bacteria, exhibit superior biosorption and bio-accumulation capabilities. This review deals with HM uptake and toxicity mechanisms associated with HMs, and will increase our knowledge on their toxic effects on the body organs, leading to better management of metal poisoning. This review aims to enhance comprehension and offer sources for the judicious selection of microbial remediation technology for the detoxification of HMs. Microbial-based solutions that are sustainable could potentially offer crucial and cost-effective methods for reducing the toxicity of HMs.

Superparamagnetic Spinel-Ferrite Nano-Adsorbents Adapted for Hg2+, Dy3+, Tb3+ Removal/Recycling: Synthesis, Characterization, and Assessment of Toxicity

In the present work, superparamagnetic adsorbents based on 3-aminopropyltrimethoxy silane (APTMS)-coated maghemite (γFe₂O₃@SiO₂-NH₂) and cobalt ferrite (CoFe₂O₄@SiO₂-NH₂) nanoparticles were prepared and characterized using transmission-electron microscopy (TEM/HRTEM/EDXS), Fourier-transform infrared spectroscopy (FTIR), specific surface-area measurements (BET), zeta potential (ζ) measurements, thermogravimetric analysis (TGA), and magnetometry (VSM). The adsorption of Dy³⁺, Tb³⁺, and Hg²⁺ ions onto adsorbent surfaces in model salt solutions was tested. The adsorption was evaluated in terms of adsorption efficiency (%), adsorption capacity (mg/g), and desorption efficiency (%) based on the results of inductively coupled plasma optical emission spectrometry (ICP-OES). Both adsorbents, γFe₂O₃@SiO₂-NH₂ and CoFe₂O₄@SiO₂-NH₂, showed high adsorption efficiency toward Dy³⁺, Tb³⁺, and Hg²⁺ ions, ranging from 83% to 98%, while the adsorption capacity reached the following values of Dy³⁺, Tb³⁺, and Hg²⁺, in descending order: Tb (4.7 mg/g) > Dy (4.0 mg/g) > Hg (2.1 mg/g) for γFe₂O₃@SiO₂-NH₂; and Tb (6.2 mg/g) > Dy (4.7 mg/g) > Hg (1.2 mg/g) for CoFe₂O₄@SiO₂-NH₂. The results of the desorption with 100% of the desorbed Dy³⁺, Tb³⁺, and Hg²⁺ ions in an acidic medium indicated the reusability of both adsorbents. A cytotoxicity assessment of the adsorbents on human-skeletal-muscle derived cells (SKMDCs), human fibroblasts, murine macrophage cells (RAW264.7), and human-umbilical-vein endothelial cells (HUVECs) was conducted. The survival, mortality, and hatching percentages of zebrafish embryos were monitored. All the nanoparticles showed no toxicity in the zebrafish embryos until 96 hpf, even at a high concentration of 500 mg/L.

Co-application of organic amendments and Cd-tolerant rhizobacteria for suppression of cadmium uptake and regulation of antioxidants in tomato

Cadmium (Cd) contamination is a major environmental concern with well-reported adverse impacts on environment and living entities. It limits the productivity of agricultural crops due to its excessive entry to plant tissues, and subsequent toxic effects on their growth and physiology. Application of metal tolerant rhizobacteria in combination with organic amendments has shown beneficial impacts in sustaining plant growth, on account of amendments mediated decreased metal mobility via different functional groups, as well as provision of carbon to microorganisms. We evaluated the effect of organic amendments (compost and biochar) and Cd-tolerant rhizobacteria on growth, physiology, and Cd uptake in tomato (Solanum lycopersicum). Plants were grown under Cd contamination (2 mg kg^-1), and were supplemented with 0.5% w/w of compost and biochar along with rhizobacterial inoculation in pot culture. We observed a significant reduction in shoot length, fresh and dry biomass (37, 49 and 31%) and root attributes such as root length, fresh and dry weights (35, 38 and 43%). However, Cd tolerant PGPR strain 'J-62' along with compost and biochar (0.5% w/w) mitigated the Cd induced adverse impacts on different plant attributes and improved these attributes such as root and shoot lengths (112 and 72%), fresh (130 and 146%) and dry weights (119 and 162%) of tomato roots and shoots as compared to relative control treatment. Furthermore, we observed significant increments in different antioxidant activities such as SOD (54%), CAT (49%) and APX (50%) under Cd contamination. Combined application of 'J-62' strain and organic amendments also decreased Cd translocation towards different above-ground plant parts as was pragmatic in terms of bioconcentration and translocation factors of Cd, which indicated phyto-stabilization ability of our inoculated strain for Cd. Hence, Cd tolerant PGPR in combination with organic amendments can immobilize Cd in soil and thereby, can alleviate Cd induced adverse impacts on tomato growth.

Effects of Lead and Cadmium Combined Heavy Metals on Liver Function and Lipid Metabolism in Mice

Although a large number of studies have been conducted on lead (Pb) and cadmium (Cd) exposure individually, information regarding the toxicity of combined Pb and Cd exposure is relatively limited. The present study aims to investigate the toxicity of Pb-Cd combination exposure and the corresponding mechanism. A heavy metal exposure model was established in mice by subcutaneous intragastric administration of Pb-Cd (50:1) for 35 days. Body weight, diet, hair state, mental state, liver index, haematological index, biochemical indicators and pathological section analysis were used to comprehensively evaluate toxicity. Then, classical oxidative stress indexes and lipidomics techniques were used to explore the potential mechanism. The results showed that Pb-Cd caused the mice to have low appetite, poor spirit, significantly reduced activity, slow weight gain and irritated or drying hair. Pb-Cd also caused liver enlargement, significantly increased aspartate aminotransferase (AST) and alanine aminotransferase (ALT) enzyme activities, and resulted in pathological changes to the liver. Prolonged Pb-Cd exposure led to significantly increased thrombocyte haematocrit (PCT), white blood cell (WBC), platelet (PLT) and monocyte (MON) counts and decreased red blood cell (RBC), haemoglobin (HGB), haematocrit (HCT) and lymphocyte (LYM) counts. Pb-Cd increased oxidative stress by increasing the activity of superoxide dismutase (SOD) and lactate dehydrogenase (LDH) and the content of malondialdehyde (MDA). Finally, Pb-Cd triggered lipid metabolism disorders by regulating linoleic acid, sphingolipid and glycerolipid metabolism.

Effects of intercropping on safe agricultural production and phytoremediation of heavy metal-contaminated soils

Intercropping with hyperaccumulators is believed to be an important and efficient way to achieve simultaneous safe agricultural production and phytoremediation of polluted soils. However, some studies have suggested that this technique might facilitate the uptake of heavy metals by crops. To investigate the effects of intercropping on the heavy metal contents of plants and soil, data from 135 global studies were collected and analyzed by meta-analysis. The results showed that intercropping could significantly reduce the contents of heavy metals in the main plants and soils. Plant species was the main factor that affected plant and soil metal contents in the intercropping system, and the heavy metal content could be significantly reduced when members of the Poaceae and Crassulaceae were used as main plants or when legumes were used as intercropped plants. Among all the intercropped plants, the best one for removing heavy metals from the soil was a Crassulaceae hyperaccumulator. These results not only highlight the main factors affecting intercropping systems but also provide reliable reference information for the practice of safe agricultural production coupled with phytoremediation of heavy metal-contaminated farmland.

Iron oxide nanoparticles/nanocomposites derived from steel and iron wastes for water treatment: A review

Iron oxide nanoparticles (IONPs) are characterized by superior magnetic properties, high surface area to volume ratio, and active surface functional groups. These properties aid in removal of pollutants from water, through adsorption and/or photocatalysis, justifying the choice of IONPs in water treatment systems. IONPs are usually developed from commercial chemicals of ferric and ferrous salts alongside other reagents, a procedure that is costly, environmentally unfriendly and limits their mass production. On the other hand, steel and iron industries produce both solid and liquid wastes which in most cases are piled, discharged into water streams or landfilled as strategies to dispose them off. Such practices are detrimental to environmental ecosystems. Given the high content of iron present in these wastes, they can be used to generate IONPs. This work reviewed published literature through selected key words on the deployment of steel and/or iron-based wastes as IONPs precursors for water treatment. The findings reveal that steel waste-derived IONPs have properties such as specific surface area, particle sizes, saturation magnetization, and surface functional groups that are comparable or sometimes better than those synthesized from commercial salts. Furthermore, the steel waste-derived IONPs have high removal efficacy for heavy metals and dyes from water with possibilities of being regenerated. The performance of steel waste-derived IONPs can be enhanced by functionalization with different reagents such as chitosan, graphene, and biomass based activated carbons. Nonetheless, there is need to explore the potential of steel waste-based IONPs in removing contaminants of emerging concern, modifying pollutant detection sensors, their techno-economic feasibility in large treatment plants, toxicity of these nanoparticles when ingested into the human body, among other areas.

The accumulation of heavy metals in feeder insects and their impact on animal production

Insects have emerged as a novel feed protein source that could help to produce enough food to feed the growing global population. Good-quality protein content, minerals and bioactive compounds are the main reasons for the use of insects in livestock. Nonetheless, insects should be proven to be safe for use before being used as feeder insects for livestock. The accumulation of heavy metals in the feedstuff is becoming a major food safety concern, as this poses a serious problem to animal health and threatens human health through the transmission of toxic substances into the human food chain. It has been shown that feeder insects grown from agricultural waste materials contain chemical contaminants such as pesticides and veterinary drug residues. Current research mostly focuses on the safety evaluation of undesirable substances in edible insects for human consumption, but rarely indicates if these insects are safe to use in livestock feeds, particularly for avian species. Therefore, owing to the potential risks of heavy metal in animal production, heavy metal residues in feeder insects have received scientific attention. Hence, this review article is intended to evaluate and discuss selected heavy metals in insects, comparing them with toxicity limits for feedstuff of animal origin, and their potential risks of exposure. A literature search on metal elements present in insects was conducted using electronic databases. In addition, the citations included in articles were used to find other relevant articles or documents on this topic. Identified published articles were grouped and evaluated according to the insect species, growth stage and substrate from which the insects were grown. It was observed that the accumulation of heavy metals in insects is mainly associated with agricultural waste materials fed to insects. Furthermore, metal toxicity in animals varies according to animal species and age, metal type, concentration, and chemical form.

Preparation and performance of bionanocomposites based on grafted chitosan, GO and TiO2-NPs for removal of lead ions and basic-red 46

Wastewater rich in heavy metals and organic compounds represents one of the essential environmental pollutants. Therefore, a practical approach is to fabricate eco-friendly polymer-based systems with a high ability to absorb pollutants. Herein, bionanocomposites consisting of chitosan (Cs) grafted by various monomers, such as acrylamide (Am), acrylic acid (AA), and 4-styrene sulfonic acid (SSA), and hybrid nanoparticles of graphene oxide/titanium dioxide nanoparticles (GO@TiO₂-NPs) were fabricated. The prepared nanomaterials and bionanocomposites characterized via various tools. The data illustrated that the prepared GO had a thickness of 10 nm and TiO₂-NPs had a diameter of 25 nm. In addition, the grafted chitosan (gCs) using Am and SSA had the largest surface area (gCs2; 22.89 nm) and its bionanocomposite (NC5; 104.79 nm). In addition, the sorption ability of the 0.15 g of prepared bionanocomposites to the (100 mg/L) of lead ions (Pb²⁺) and (25 mg/L) of basic-red 46 (BR46) under various conditions has been studied. The results showed that gCs3 and NC5 had the highest adsorption of Pb²⁺ (79.54 %) and BR46 (79.98 %), respectively. The kinetic study results of the sorbents obeyed the Pseudo second-order model. In contrast, the isothermal study followed the Freundlich adsorption model for Pb²⁺ and the Langmuir adsorption model for BR46.

Integrated transcriptome and metabonomic analysis of key metabolic pathways in response to cadmium stress in novel buckwheat and cultivated species

INTRODUCTION

Buckwheat (Fagopyrum tataricum), an important food crop, also has medicinal uses. It is widely planted in Southwest China, overlapping with planting areas remarkably polluted by cadmium (Cd). Therefore, it is of great significance to study the response mechanism of buckwheat under Cd stress and further develop varieties with excellent Cd tolerance.

METHODS

In this study, two critical periods of Cd stress treatment (days 7 and 14 after Cd treatment) of cultivated buckwheat (Pinku-1, named K33) and perennial species (F. tatari-cymosum Q.F. Chen) (duoku, named DK19) were analyzed using transcriptome and metabolomics.

RESULTS

The results showed that Cd stress led to changes in reactive oxygen species (ROS) and the chlorophyll system. Moreover, Cd-response genes related to stress response, amino acid metabolism, and ROS scavenging were enriched or activated in DK19. Transcriptome and metabolomic analyses highlighted the important role of galactose, lipid (glycerophosphatide metabolism and glycerophosphatide metabolism), and glutathione metabolism in response to Cd stress in buckwheat, which are significantly enriched at the gene and metabolic levels in DK19.

DISCUSSION

The results of the present study provide valuable information for a better understanding of the molecular mechanisms underlying Cd tolerance in buckwheat and useful clues for the genetic improvement of drought tolerance in buckwheat.

Phytoremediation of Potentially Toxic Elements: Role, Status and Concerns

Environmental contamination with a myriad of potentially toxic elements (PTEs) is triggered by various natural and anthropogenic activities. However, the industrial revolution has increased the intensity of these hazardous elements and their concentration in the environment, which, in turn, could provoke potential ecological risks. Additionally, most PTEs pose a considerable nuisance to human beings and affect soil, aquatic organisms, and even nematodes and microbes. This comprehensive review aims to: (i) introduce potentially toxic elements; (ii) overview the major sources of PTEs in the major environmental compartments; (iii) briefly highlight the major impacts of PTEs on humans, plants, aquatic life, and the health of soil; (iv) appraise the major methods for tackling PTE-caused pollution; (v) discuss the concept and applications of the major eco-technological/green approaches (comprising phytoextraction, rhizofiltration, phytostabilization, phytovolatilization, and phytorestoration); (vi) highlight the role of microbes in phytoremediation under PTE stress; and (vii) enlighten the major role of genetic engineering in advancing the phytoremediation of varied PTEs. Overall, appropriate strategies must be developed in order to stop gene flow into wild species, and biosafety issues must be properly addressed. Additionally, consistent efforts should be undertaken to tackle the major issues (e.g., risk estimation, understanding, acceptance and feasibility) in order to guarantee the successful implementation of phytoremediation programs, raise awareness of this green technology among laymen, and to strengthen networking among scientists, stakeholders, industrialists, governments and non-government organizations.

A Multi-Method Approach for Impact Assessment of Some Heavy Metals on Lactuca sativa L

Heavy metals represent a large category of pollutants. Heavy metals are the focus of researchers around the world, mainly due to their harmful effects on plants. In this paper, the influence of copper, cadmium, manganese, nickel, zinc and lead, present in soil in different concentrations (below the permissible limit, the maximum permissible concentration and a concentration higher than the maximum permissible limit) on lettuce (Lactuca sativa L.) was evaluated. For this purpose, the authors analyzed the variation of photosynthetic pigments, total polyphenols, antioxidant activity and the elemental content in the studied plants. The experimental results showed that the variation of the content of biologically active compounds, elemental content and the antioxidant activity in the plants grown in contaminated soil, compared to the control plants, depends on the type and concentration of the metal added to the soil. The biggest decrease was recorded for plants grown in soil treated with Ni I (-42.38%) for chlorophyll a, Zn II (-32.92%) for chlorophyll b, Ni I (-40.46%) for carotenoids, Pb I (-40.95%) for polyphenols and Cu III (-29.42%) for DPPH. On the other hand, the largest increase regarding the amount of biologically active compounds was registered for Mn I (88.24%) in the case of the chlorophyll a, Mn I (65.56%) for chlorophyll b, Pb I (116.03%) for carotenoids, Ni III (1351.23%) for polyphenols and Ni III (1149.35%) for DPPH.

Stepwise recycling of Fe, Cu, Zn and Ni from real electroplating sludge via coupled acidic leaching and hydrothermal and extraction routes

Fe/S-bearing erdite flocculant has been proven to be effective in the precipitation of heavy metals from real electroplating wastewater, with the only drawback being the huge production of sludge. This sludge was rich in Fe/S/Zn/Cu/Ni and refractory to be recycled due to the extractant pollution by free Fe and the dissolution of sulphide. Herein, a multistep separation method was developed to dissolve sulphide and separate Fe prior to Zn/Cu/Ni. Results showed that more than 92% sludge was dissolved as Fe/Zn/Cu/Ni-rich leachate after the sludge was leached by nitric acid, with the rest of the remaining undissolved elemental sulphurs. When the leachate was directly extracted by using commercially extractant Acorga M5640 and Di-(2-ethylhexyl) phosphoric acid (P204), Fe was complexed by the phosphate group of the extractant. The Fe was effectively removed prior to Zn/Cu/Ni to avoid the extractant pollution. The Fe removal efficiency was only 38.34% without sucrose, but it rose to 99.94% with the addition of 0.5 g sucrose. The added sucrose reacted with nitrate to consume H⁺, which showed a similar rate to the H⁺ release from Fe hydrolysis. Thereafter, the Fe hydrolysis was continued to remove, the Fe at a high level. The removed Fe was in the form of high-purified hematite nanorod with a diameter and length of 300-600 nm and 0.5-2.5 μm, respectively. After Fe removal, Cu/Zn/Ni was extracted by using Acorga M5640 and P204 to form three halite, including a mixture of copper sulphate hydrate and bonattite (96.8% CuSO₄·H₂O/CuSO₄·3H₂O), gunningite (97.5% ZnSO₄·H₂O) and dwornikite (97.9% NiSO₄·H₂O). The rest of the solution was neutralised by lime water to remove sulphate as gypsum (95.9% CaSO₄) to meet the discharge standard of the electroplating industry. In summary, the recycling efficiency of Fe/Cu/Zn/Ni from the sludge reached 94.4%, 92.6%, 94.7% and 95.3%, which provided an alternative strategy to resource utilise Fe/S-bearing solid waste.

Occurrence and Distribution of Heavy Metals in Mining Degraded Soil and Medicinal Plants: A Case Study of Pb/Zn Sulfide Terrain Northern Areas, Pakistan

Mining activities have serious environmental impacts, thus releasing heavy metals (HMs) such as cadmium (Cd), lead (Pb), chromium (Cr), zinc (Zn) and nickel (Ni) into the surrounding environment. The current paper investigated the impacts of mining activities of Pb-Zn sulfide on soil and medicinal plants. Hence, soil samples (n = 36) and medicinal plants (n = 36) samples were collected, acid extracted and were analyzed through Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for HMs quantification. Our results showed that mineralized zones showed high HMs enrichment levels as compared to non-mineralized zones. Various Indices for HMs assessment revealed that the contaminated soil of the study area had low to extreme level. The mean concentrations of HMs in mining degraded soil and medicinal plants were significantly higher (p ≤ 0.01) and were found in order of Zn > Pb > Cr > Ni > Cd and Cr > Zn > Pb > Ni > Cd respectively. Similarly, some widely consumable medicinal plants showed good metal accumulation for Cd, Cr and Pb i.e., 3.57 mg kg¹, 350 mg kg^-1 and 335 mg kg^-1 in C. sativa, while 5.9 mg kg-1, 276.9 mg kg-1 and 188.7 mg kg-1 in R. hestatus respectively. Hence, the present study recommended that medicinal plants grown in mining areas should be analyzed for HMs concentration before consumption.

Heavy Metals in Four Marine Fish and Shrimp Species from a Subtropical Coastal Area: Accumulation and Consumer Health Risk Assessment

Trace-element or heavy-metal pollution has emerged as a serious concern in terms of both environmental and human health issues. This study measured six trace and toxic heavy metals (Pb, Cd, Cr, Ni, Cu, and Zn) in four marine fish and shrimp species to assess their accumulation levels and evaluate the risks to human health. The mean concentrations of the metals in fish and shrimp species (Labeo bata, Sillaginopsis panijus, Platycepalus fuscus, and Penaeus monodon) followed the decreasing order of Zn (40.8 ± 9.7 μg/g) > Cu (17.8 ± 7.1 μg/g) > Pb (6.2 ± 1.8 μg/g) > Ni (0.4 ± 0.3 μg/g) > Cd (0.06 ± 0.02 μg/g > Cr (below detection level). Among the metals, only Pb in finfish and Pb, Cu, and Zn in shrimp samples exceeded the national recommended limits, representing possible risks to consumers. The mean metal concentrations in the studied fish/shrimp species followed the descending order of P. monodon > S. panijus > P. fuscus > L. bata, which implies that bottom dwellers and omnivores had higher levels of metals. However, the estimated daily intake (EDI) concentrations of Zn and Cu for the studied species were lower than the RDA (Recommended Daily Allowance). In addition, the Target Hazard Quotient (THQ) and hazard index (HI or TTHQ) values for all species were < 1, indicating that consumers might not experience carcinogenic health risks. A strong significant (p < 0.05) correlation between Cu and Pb (r = 0.623) and Zn and Cu (r = −0.871) indicated they were from the same source of origin. Cluster analysis (CA) and principal component analysis (PCA) demonstrated possible anthropogenic sources of toxic metals in the study area, specifically industrial wastes and agricultural chemicals.

Effects of cadmium (Cd) on fungal richness, diversity, and community structure of Haplic Cambisols and inference of resistant fungal genera

Cadmium (Cd) is one of the most toxic and widely distributed pollutants in mining sites of Northeast China, and how Cd contamination may affect the fungal characteristics of the zonal Haplic Cambisols is still unknown. The study aims to investigate the richness and diversity of fungal community in Haplic Cambisols in response to Cd treatments and to infer Cd-resistant fungal genera. Haplic Cambisol was treated with different concentrations of CdCl₂·2.5H₂O solution (0 mg kg^-1, 1 mg kg^-1, 5 mg kg^-1, 25 mg kg^-1, and 50 mg kg^-1, expressed as CK, T1, T2, T3, and T4, respectively), and fungal community was analyzed by high-throughput sequencing technology at 30 days, 60 days, or 80 days after Cd treatment (expressed as d30, d60, and d80, respectively). The results showed that Cd treatment usually increased the richness and diversity indices, the variation of diversity index under different Cd concentrations was not obvious, and different Cd incubation times had an inhibitory effect on fungal richness, but the diversity first increased and then decreased. Besides, Ascomycota and Mortierellomycota having the highest abundance in Haplic Cambisols showed the most pronounced changes under Cd treatment. Accordingly, Cd-resistant fungi were also found, such as Aspergillus, Fusarium, Penicillium, and Trichoderma, especially Aspergillus, which had relatively high abundance. The results obtained in this study had potentially significant findings for soil biodiversity and Cd bioremediation.

Reline deep eutectic solvent mediated synthesis of lanthanum titanate for heavy metal remediation and photocatalytic degradation

Toxic heavy metal and dye contamination are potential threats that mutilate the essential triad of life; air, water and soil. Despite commercial applicability and importance, the over accumulation of these noxious toxicants has become a disturbing concern. As a result, their remediation has drawn greater fascination leading to the inexplicable quest for a material which can act as both an adsorbent and as a photocatalyst. The present work highlights a novel solid-state technique assisted with reline (Choline chloride: Urea) deep eutectic solvent for the synthesis of lanthanum titanate. The synthesized material was established with physical characterizations like PXRD, FT-IR, UV-DRS, BET, XPS, HR-SEM and TEM techniques. Further, the ruptured petal-like lanthanum titanate was integrated as an adsorbent for the removal of lead (Pb), arsenic (As) and chromium (Cr) heavy metals. The adsorbent presented increased adsorption efficiencies of 96, 74 and 71% towards Pb, As and Cr respectively. Dependence of the degradation efficiency over concentration, pH, contact time and competitive environments were analyzed and inferred. Furthermore, lanthanum titanate was used for the photocatalytic degradation of reactive black (RB5), red (RR198) and yellow (RY145) dyes. The degradation efficiencies were found to be 68.31, 85.2 and 96.8% for RB5, RR198 and RY145 dyes respectively. Variation in concentration and pH of the dye solutions were examined and reaction kinetics was also proposed. In conclusion, the as synthesized lanthanum titanate is assured to play dual roles as a versatile cost-effective adsorbent for the remediation of heavy metals and as a potential candidate for photocatalytic degradation.

Preparation of Isopropyl Acrylamide Grafted Chitosan and Carbon Bionanocomposites for Adsorption of Lead Ion and Methylene Blue

Wastewater, which is rich with heavy elements, dyes, and pesticides, represents one of the most important environmental pollutants. Thus, it has been significant to fabricate environmentally friendly polymers with high adsorption ability for those pollutants. Herein, crosslinked chitosan (C-Cs) was prepared using isopropyl acrylamide and methylene bisacrylamide. Carbon nanoparticles (C-NPs) were also obtained by the treatment of the agricultural wastes, which was used with C-Cs to prepare C-Cs/C-NPs nanocomposite (C-Cs/C-NC). Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and transmission electron microscope (TEM) were used to investigate the prepared adsorbent. C-Cs, C-NPs, and C-Cs/C-NC were used in water treatment for the adsorption of lead ions (Pb⁺²) and methylene blue (MB). The adsorption process occurred by the prepared samples was investigated under different conditions, including contact time, as well as different doses and concentrations of adsorbents. The findings exhibited that the adsorption of Pb⁺² and MB by C-Cs/C-NC was higher than C-Cs and C-NPs. In addition, the kinetic and isotherm models were studied, where the results showed that the adsorption of Pb⁺² and MB by various adsorbents obeys pseudo-second-order and Langmuir isotherms, respectively.

Neurotoxic effects of environmental contaminants-measurements, mechanistic insight, and environmental relevance

Pollution is a significant and growing concern for any population regardless of age because these environmental contaminants exhibit different neurodegenerative effects on persons of different ages. These environmental contaminants are the products of human welfare projects like industry, automobile exhaust, clinical and research laboratory extrudes, and agricultural chemicals. These contaminants are found in various forms in environmental matrices like nanoparticles, particulate matter, lipophilic vaporized toxicants, and ultrafine particulate matter. Because of their small size, they can easily cross blood-brain barriers or use different cellular mechanisms for assistance. Other than this, these contaminants cause an innate immune response in different cells of the central nervous system and cause neurotoxicity. Considering the above critiques and current needs, this review summarizes different protective strategies based on bioactive compounds present in plants. Various bioactive compounds from medicinal plants with neuroprotective capacities are discussed with relevant examples. Many in vitro studies on clinical trials have shown promising outcomes using plant-based bioactive compounds against neurological disorders.

Investigating the role of bentonite clay with different soil amendments to minimize the bioaccumulation of heavy metals in Solanum melongena L. under the irrigation of tannery wastewater

Wastewater from tanneries is a major source of heavy metals in soil and plants when used for crop irrigation. The unavoidable toxicological effects of this contamination, however, can be minimized through two independent steps discussed in the present study. In the first step, a batch sorption experiment was conducted in which Cr was adsorbed through bentonite clay. For this purpose, DTPA extraction method was used to analyze Cr concentration in the soil after regular time intervals (0.5, 1, 2, 6, 8, 9, 10.5, 11.5, and 20.3 h) which reduced Cr concentration from 38.542 mgL^-1 for 30 min to 5.6597 mgL^-1 for 20.3 h, respectively, by applying 1% bentonite. An increase in the contact time efficiently allowed soil adsorbent to adsorb maximum Cr from soil samples. In the second step, a pot experiment was conducted with 10 different treatments to improve the physiological and biochemical parameters of the Solanum melongena L. irrigated under tanneries' wastewater stress. There were four replicates, and the crop was harvested after 30 days of germination. It was seen that the application of wastewater significantly (P < 0.01) reduced growth of Solanum melongena L. by reducing root (77%) and shoot (63%) fresh weight when compared with CFOP (Ce-doped Fe₂O₃ nanoparticles); chlorophyll a and b (fourfolds) were improved under CFOP application relative to control (CN). However, the deleterious effects of Cr (86%) and Pb (90%) were significantly decreased in shoot through CFOP application relative to CN. Moreover, oxidative damage induced by the tannery's wastewater stress (P < 0.01) was tolerated by applying different soil amendments. However, results were well pronounced with the application of CFOP which competitively decreased the concentrations of MDA (95%), H₂O₂ (89%), and CMP (85%) by efficiently triggering the activities of antioxidant defense mechanisms such as APX (threefold), CAT (twofold), and phenolics (75%) in stem relative to CN. Consequently, all the applied amendments (BN, BT, FOP, and CFOP) have shown the ability to efficiently tolerate the tannery's wastewater stress; results were more pronounced with the addition of CFOP and FOP+BT by improving physiological and biochemical parameters of Solanum melongena L. in an eco-friendly way.

Synthesis and characterization of magnetic organic montmorillonite: efficient adsorption of hexavalent chromium

This research compared two potential adsorbents for the efficient adsorption of toxic hexavalent chromium. The non-magnetic material STAC-Mt and the magnetic material FeSO₄-STAC-Mt were synthesized by a simple impregnation method using montmorillonite (Mt), octadearyl dimethyl ammonium chloride (STAC) and ferrous sulfate as raw materials. The structural and morphological characteristics of both adsorbents were investigated by BET, XRD, FTIR, Zeta, VSM, TEM, SEM and XPS techniques. SEM and TEM results clearly revealed that FeSO₄-STAC-Mt had a more loosely curled structure than STAC-Mt and the existence of well dispersed diamond-shaped magnetic particles. The saturation magnetization intensity of 17.949 emu/g obtained by VSM further confirmed the presence of magnetite particles in FeSO₄-STAC-Mt. Due to the superparamagnetic properties of magnetite, the adsorption performance of FeSO₄-STAC-Mt was better than STAC-Mt. FeSO₄-STAC-Mt adsorbed up to 43.98 mg/g of Cr(VI), meanwhile it was easily separated from the reaction mixture by an external magnetic field. Intermittent adsorption studies at pH, adsorbent dosage and time revealed a rapid Cr(VI) adsorption process. In combination with response surface optimization analysis, a removal rate of 98.03% of Cr(VI) was obtained at pH 5-6. The adsorption process was properly described by the pseudo-second-order kinetic equation and the Langmuir equation, and the adsorption process was chemisorption and single molecular layer adsorption. In addition, the removal of Cr(VI) reached 72.68% after five cycles, demonstrating the good stability of the FeSO₄-STAC-Mt.