The toxicity of aluminium in humans

Potential protection of resveratrol-tempeh against nephrotoxic and hepatotoxic histological damage in mice induced by aluminum

Aluminum is a widely distributed metal that, while generally safe at low levels, can become toxic when accumulated in the body. Its exposure is daily through various sources, including food, water, and medications. High levels of aluminum have been shown to adversely affect the kidneys and liver, leading to significant organ damage. Resveratrol-tempeh is a safe protective agent against organ damage caused by aluminum. Here, we investigated the impact of resveratrol on liver and kidney toxicity and Al-induced levels of catalase and malondialdehyde. The mice group was the control group, Al-group, Al+REST5-group, and Al+REST10-group. Aluminum and resveratrol were administered intraperitoneally to mice for four weeks, but resveratrol was administered one hour after exposure to aluminum. Mice were killed by cervical dislocation; the liver and kidney were isolated for slide, and the level of an antioxidant enzyme of catalase and oxidant of malondialdehyde was measured. The results showed that administration of aluminum at a dose of 200 mg/kg body weight caused glomerular shrinkage and proximal tubule degeneration in the kidneys. In addition, it also caused liver tissue damage, with hepatocytes undergoing degeneration, sinusoids dilating, and decreased body weight in the mice. Administration of resveratrol-tempeh tended to decrease malondialdehyde levels and increase catalase activity, although the changes were not significant. It seems that resveratrol-tempeh can repair liver and kidney damage and restore them to normal conditions. Conclusion: Aluminum at 200 mg/kg is toxic to mice. Resveratrol-tempeh can be considered a potential candidate to protect kidney and liver damage caused by aluminum chloride toxicity.

A green procedure for the determination of bioavailable forms of aluminum in natural waters by electrothermal atomic absorption spectroscopy combined with microextraction technique

Aluminum is a prevalent element in nature, but bioavailable forms of aluminum are toxic to plants, animals, and humans. The present study is dedicated to the development of an ecologically friendly, fast, simple, reliable, sensitive, and accurate improved procedure for the determination of subtrace concentrations of bioavailable forms of aluminum in natural waters. The procedure includes the separation and pre-concentration of bioavailable forms of aluminum using vortex-assisted liquid-liquid microextraction (VALLME) of ionic associates with salicylaldehyde 4-picolinhydrazone (SAPH) and sodium dodecyl sulfate (DDSNa) by isoamylacetate (200 μl) and direct electrothermal atomic absorption spectroscopy (ET AAS). The SAPH reagent interacts only with water-soluble forms of aluminum. SAPH is used for the pre-concentration of bioavailable forms of aluminum as well as a chemical modifier; it increases the absorbance and the precision of the analytical signal of aluminum. The calibration curve shows the linear dependence in the range of 0.05-86 μg⋅L-1 of the aluminum concentration (R2 = 0.992), with the limit of detection at 0.015 μg⋅L-1 and the limit of quantification at 0.05 μg⋅L-1. The accuracy of the proposed procedure for bioavailable forms of aluminum determination was verified on model solutions and against a reference method on natural samples of river and lake waters (RSD 3.2-5.2%, recovery 97.1-103.4%).

Spectrochemical Analysis of Nutritional and Toxic Metals in Different Brands of Candies Using Advanced Diagnostic Approaches

Candies are frequently consumed sweetened food products among children, and their consumption can expose them to potential toxins and contamination. The present study employed calibration-free-laser-induced breakdown spectroscopy (CF-LIBS) as a steadfast diagnostic technique to analyze the presence of nutritional and heavy metals in candies from various brands available in local markets in Haripur, Pakistan. A pulsed Nd-YAG laser was used to create a microplasma on the target surface. The emitted light was collected using a dedicated spectrometer to analyze and quantify the species present in the candies. The analysis revealed the presence of micronutrients, macronutrients, and trace toxic metals such as Ca, K, Mg, Fe, Na, Al, Pb, Cr, Mn, Zn, Cu, and Ni. The optimization of our LIBS system was achieved through a parametric dependence study. The confirmation of the assumption of local thermodynamic equilibrium was achieved by assessing McWhirter's criterion and considering the relaxation time and the diffusion length of atoms in plasma. The highest concentrations (measured in mg/kg) of Pb, Cr, and Mn were determined to be 15 mg/kg, 340 mg/kg, and 880 mg/kg, respectively. The levels of Pb and Cr were found to be well above the maximum accepted limit set by the WHO. Similarly, the concentration of Mn in S-4 and S-5 exceeded the permissible limits set by the WHO. However, Zn, Cu, and Ni were found within safe limits in all the collected samples. In addition, the abundance obtained through CF-LIBS was compared to the concentration of similar (duplicate) candies samples analyzed using a standard analytical technique like inductively coupled plasma-optical emission spectroscopy. Excellent harmony could be seen in both outcomes. Moreover, energy-dispersive X-ray spectroscopy (EDX) was also utilized to confirm the presence of detected toxins. The significance of our findings lies in creating awareness among the public about the health risks associated with consuming toxins through candies, thereby protecting numerous human lives.

Aluminum and ABC transporter activity

Aluminum is the third most common element on Earth´s crust and despite its wide use in our workaday life it has been associated with several health risks after overexposure. In the present study the impact of aluminum salts upon ABC transporter activity was studied in the P-GP-expressing human blood-brain barrier cell line hCMEC/D3, in MDCKII cells overexpressing BCRP and MRP2, respectively, and in freshly isolated, functionally intact kidney tubules from Atlantic killifish (Fundulus heteroclitus), which express the analog ABC transporters, P-gp, Bcrp and Mrp2. In contrast to previous findings with heavy metals salts (cadmium(II) chloride or mercury(II) chloride), which have a strong inhibitory effect on ABC transporter activity, or zinc(II) chloride and sodium arsenite, which have a stimulatory effect upon ABC transport function, the results indicate no modulatory effect of aluminum salts on the efflux activity of the human ABC transporters P-GP, BCRP and MRP2 nor on the analog transporters P-gp, Bcrp and Mrp2.

Retinal toxicity of heavy metals and its involvement in retinal pathology

The objective of the present review is to discuss epidemiological evidence demonstrating the association between toxic metal (Cd, Pb, Hg, As, Sn, Ti, Tl) exposure and retinal pathology, along with the potential underlying molecular mechanisms. Epidemiological studies demonstrate that Cd, and to a lesser extent Pb exposure, are associated with age-related macular degeneration (AMD), while the existing evidence on the levels of these metals in patients with diabetic retinopathy is scarce. Epidemiological data on the association between other toxic metals and metalloids including mercury (Hg) and arsenic (As), are limited. Clinical reports and laboratory in vivo studies have shown structural alterations in different layers of retina following metal exposure. Examination of retina samples demonstrate that toxic metals can accumulate in the retina, and the rate of accumulation appears to increase with age. Experimental studies in vivo and in vitro studies in APRE-19 and D407 cells demonstrate that toxic metal exposure may cause retinal damage through oxidative stress, apoptosis, DNA damage, mitochondrial dysfunction, endoplasmic reticulum stress, impaired retinogenesis, and retinal inflammation. However, further epidemiological as well as laboratory studies are required for understanding the underlying molecular mechanisms and identifying of the potential therapeutic targets and estimation of the dose-response effects.

Decoupling of gray and white matter functional networks in cognitive impairment induced by occupational aluminum exposure

Aluminum (Al) is a low-toxic, accumulative substance with neurotoxicity properties that adversely affect human cognitive function. This study aimed to investigate the neurobiological mechanisms underlying cognitive impairment resulting from occupational Al exposure. Resting-state functional magnetic resonance imaging was conducted on 54 individuals with over 10 years of Al exposure. Al levels were measured, and cognitive function was assessed using the Montreal Cognitive Assessment (MoCA). Subsequently, the K-means clustering algorithm was employed to identify functional gray matter (GM) and white matter (WM) networks. Two-sample t-tests were conducted between the cognition impairment group and the control group. Al exhibited a negative correlation with MoCA scores. Participants with cognitive impairment demonstrated reduced functional connectivity (FC) between the middle cingulum network (WM1) and anterior cingulum network (WM2), as well as between the executive control network (WM6) and limbic network (WM10). Notably, decreased FCs were observed between the executive control network (GM5) and WM1, WM4, WM6, and WM10. Additionally, the FC of GM5-GM4 and WM1-WM2 negatively correlated with Trail Making Test Part A (TMT-A) scores. Prolonged Al accumulation detrimentally affects cognition, primarily attributable to executive control and limbic network disruptions.

Leaching characteristics of metals from recycled concrete aggregates (RCA) and reclaimed asphalt pavements (RAP)

Recycled concrete aggregates (RCA) and reclaimed asphalt pavements (RAP) are two construction waste products that are commonly used in the road construction industry. Besides many advantages, pollutants leaching from RCA and RAP are highlighted as the most concerning environmental issue. This study investigated metals leaching characteristics from RCA and RAP due to the variations in key influential factors of pH, dissolved organic carbon (DOC), compaction and liquid to solid ratio (L/S). The leaching tests for RCA and RAP were carried out separately and additionally, the standard leaching test was conducted as the benchmark for leaching investigations. Study outcomes revealed that the combined influences of factors are variable for RCA and RAP, while influences are also variable for individual metals. L/S ratios considerably affect the release of metals from RCA under saturated conditions, facilitating high metal concentrations in the leachate. On the other hand, acidic solutions are more favourable for leaching of metals from RAP. The influence of DOC in solution was minimal on the metal leachability. Interestingly, the increased degree of compaction with a higher density of materials presented the highest negative influence on metal leachability, suggesting that the metal leachability can significantly reduce, in particular when the RCA and RAP are used for the sub-base layers of road structure with a higher degree of compaction. However, the use of these recycled materials under field conditions should be further studied as there is an increasing concern of metal leaching from RCA and RAP with respect to recreational and drinking water thresholds.

In vitro and in vivo degradation, biocompatibility and bone repair performance of strontium-doped montmorillonite coating on Mg-Ca alloy

Poor bone growth remains a challenge for degradable bone implants. Montmorillonite and strontium were selected as the carrier and bone growth promoting elements to prepare strontium-doped montmorillonite coating on Mg-Ca alloy. The surface morphology and composition were characterized by SEM, EDS, XPS, FT-IR and XRD. The hydrogen evolution experiment and electrochemical test results showed that the Mg-Ca alloy coated with Sr-MMT coating possessed optimal corrosion resistance performance. Furthermore, in vitro studies on cell activity, ALP activity, and cell morphology confirmed that Sr-MMT coating had satisfactory biocompatibility, which can significantly avail the proliferation, differentiation, and adhesion of osteoblasts. Moreover, the results of the 90-day implantation experiment in rats indicated that, the preparation of Sr-MMT coating effectively advanced the biocompatibility and bone repair performance of Mg-Ca alloy. In addition, The Osteogenic ability of Sr-MMT coating may be due to the combined effect of the precipitation of Si4+ and Sr2+ in Sr-MMT coating and the dissolution of Mg2+ and Ca2+ during the degradation of Mg-Ca alloy. By using coating technology, this study provides a late-model strategy for biodegradable Mg alloys with good corrosion resistance, biocompatibility. This new material will bring more possibilities in bone repair.

Laser-induced graphene electrochemical sensor for quantitative detection of phytotoxic aluminum ions (Al3+) in soils extracts

Aluminum in its Al3+ form is a metal that inhibits plant growth, especially in acidic soils (pH < 5.5). Rapid and accurate quantitative detection of Al3+ in agricultural soils is critical for the timely implementation of remediation strategies. However, detecting metal ions requires time-consuming preparation of samples, using expensive instrumentation and non-portable spectroscopic techniques. As an alternative, electrochemical sensors offer a cost-effective and minimally invasive approach for in situ quantification of metal ions. Here, we developed and validated an electrochemical sensor based on bismuth-modified laser-induced graphene (LIG) electrodes for Al3+ quantitative detection in a range relevant to agriculture (1-300 ppm). Our results show a linear Al3+ detection range of 1.07-300 ppm with a variation coefficient of 5.3%, even in the presence of other metal ions (Pb2+, Cd2+, and Cu2+). The sensor offers a limit of detection (LOD) of 0.34 ppm and a limit of quantification (LOQ) of 1.07 ppm. We compared its accuracy for soil samples with pH < 4.8 to within 89-98% of spectroscopic methods (ICP-OES) and potentiometric titration. This technology's portability, easy to use, and cost-effectiveness make it a promising candidate for in situ quantification and remediation of Al3+ in agricultural soils and other complex matrices.

Pharmacodynamic, pharmacokinetic, toxicity, and recent advances in Eugenol's potential benefits against natural and chemical noxious agents: A mechanistic review

The active biological phytochemicals, crucial compounds employed in creating hundreds of medications, are derived from valuable and medicinally significant plants. These phytochemicals offer excellent protection from various illnesses, including inflammatory disorders and chronic conditions caused by oxidative stress. A phenolic monoterpenoid known as eugenol (EUG), it is typically found in the essential oils of many plant species from the Myristicaceae, Myrtaceae, Lamiaceae, and Lauraceae families. One of the main ingredients of clove oil (Syzygium aromaticum (L.), Myrtaceae), it has several applications in industry, including flavoring food, pharmaceutics, dentistry, agriculture, and cosmeceuticals. Due to its excellent potential for avoiding many chronic illnesses, it has lately attracted attention. EUG has been classified as a nonmutant, generally acknowledged as a safe (GRAS) chemical by the World Health Organization (WHO). According to the existing research, EUG possesses notable anti-inflammatory, antioxidant, analgesic, antibacterial, antispasmodic, and apoptosis-promoting properties, which have lately gained attention for its ability to control chronic inflammation, oxidative stress, and mitochondrial malfunction and dramatically impact human wellness. The purpose of this review is to evaluate the scientific evidence from the most significant research studies that have been published regarding the protective role and detoxifying effects of EUG against a wide range of toxins, including biological and chemical toxins, as well as different drugs and pesticides that produce a variety of toxicities, throughout view of the possible advantages of EUG.

A review of the epidemiological and laboratory evidence of the role of aluminum exposure in pathogenesis of cardiovascular diseases

The objective of the present study was to review the epidemiological and laboratory evidence on the role of aluminum (Al) exposure in the pathogenesis of cardiovascular diseases. Epidemiological data demonstrated an increased incidence of cardiovascular diseases (CVD), including hypertension and atherosclerosis in occupationally exposed subjects and hemodialysis patients. In addition, Al body burden was found to be elevated in patients with coronary heart disease, hypertension, and dyslipidemia. Laboratory studies demonstrated that Al exposure induced significant ultrastructural damage in the heart, resulting in electrocardiogram alterations in association with cardiomyocyte necrosis and apoptosis, inflammation, oxidative stress, inflammation, and mitochondrial dysfunction. In agreement with the epidemiological findings, laboratory data demonstrated dyslipidemia upon Al exposure, resulting from impaired hepatic lipid catabolism, as well as promotion of low-density lipoprotein oxidation. Al was also shown to inhibit paraoxonase 1 activity and to induce endothelial dysfunction and adhesion molecule expression, further promoting atherogenesis. The role of Al in hypertension was shown to be mediated by up-regulation of NADPH-oxidase, inhibition of nitric oxide bioavailability, and stimulation of renin-angiotensin-aldosterone system. It has been also demonstrated that Al exposure targets cerebral vasculature, which may be considered a link between Al exposure and cerebrovascular diseases. Findings from other tissues lend support that ferroptosis, pyroptosis, endoplasmic reticulum stress, and modulation of gut microbiome and metabolome are involved in the development of CVD upon Al exposure. A better understanding of the role of the cardiovascular system as a target for Al toxicity will be useful for risk assessment and the development of treatment and prevention strategies.

Novel Flavonoid Photoswitchable "Turn-On" Fluorescent Chemosensors: Synthesis of Bromo Flavonols for Nanomolar Aluminum Ion Detection and Cellular Imaging, among Other Applications

Aluminum (Al), a non-essential element in living systems, can potentially cause chronic toxicity. Therefore, it is crucial to have a specific and sensitive method for detecting Al3+ in order to assess its risk to life. In this study, we designed and synthesized a novel fluorescent probe (IV) based on bromoflavonol. Upon binding to Al3+, probe IV exhibits a blue shift in emission and enhanced fluorescence, making it suitable for Al3+ detection. Our UV-Vis absorption and fluorescence emission spectra demonstrate that probe IV has high selectivity and sensitivity towards Al3+ while being immune to interference from other metal ions. Through fluorescence titration, we determined that the detection limit (LOD) of probe IV for Al3+ is 1.8 × 10-8 mol/L. Job's curve and 1 H NMR titration further confirmed a 1:1 binding stoichiometry between probe IV and Al3+. Additionally, using DFT (Density Functional Theory), we calculated the energy gap difference between IV and IV + Al3+ and found that the complex formed by probe IV and Al3+ is more stable than IV alone. We successfully detected Al3+ in tap water and river water from the middle regions of the Han River, achieving recoveries of over 96% using this probe. This demonstrates its potential for quantitative detection of Al3+ in environmental water samples. Moreover, we successfully used the probe for imaging Al3+ in MG63 cells, suggesting its potential application in biological imaging.

Aluminum exposure induces central nervous system impairment via activating NLRP3-medicated pyroptosis pathway

PURPOSE

Aluminum is an environmental toxicant whose long-term exposure is closely associated with nervous system impairment. This study mainly investigated neurological impairment induced by subchronic aluminum exposure via activating NLRP3-medicated pyroptosis pathway.

METHODS

In vivo, Kunming mice were exposed to AlCl3 (30.3 mg/kg, 101 mg/kg and 303 mg/kg) via drinking water for 3 months, and administered with Rsv (100 mg/kg) by gavage for 1 month. Cognitive impairment was assessed by Morris water maze test, and pathological injury was detected via H&E staining. BBB integrity, pyroptosis and neuroinflammation were evaluated through western blotting and immunofluorescence methods. In vitro, BV2 microglia was treated with AlCl3 (0.5 mM, 1 mM and 2 mM) to sensitize pyroptosis pathway. The protein interaction was verified by co-immunoprecipitation, and neuronal damage was estimated via a conditioned medium co-culture system with BV2 and TH22 cells.

RESULTS

Our results showed that AlCl3 induced mice memory disorder, BBB destruction, and pathological injury. Besides, aluminum caused glial activation, sensitized DDX3X-NLRP3 pyroptosis pathway, released cytokines IL-1β and IL-18, initiating neuroinflammation. BV2 microglia treated with AlCl3 emerged hyperactivation and pyroptotic death, and Ddx3x knockdown inhibited pyroptosis signaling pathway. DDX3X acted as a live-or-die checkpoint in stressed cells by regulating NLRP3 inflammasome and G3BP1 stress granules. Furthermore, aluminum-activated microglia had an adverse effect on co-cultured neurons and destroyed nervous system homeostasis.

CONCLUSION

Aluminum exposure could induce pyroptosis and neurotoxicity. DDX3X determined live or die via selectively regulating pro-survival stress granules or pro-death NLRP3 inflammasome. Excessive activation of microglia might damage neurons and aggravate nerve injury.

The associations of non-essential metal mixture with fasting plasma glucose among Chinese older adults without diabetes

The evidence about the effect of non-essential metal mixture on fasting plasma glucose (FPG) levels among older adults without diabetes is limited. This study aims to estimate the individual and joint relationship between five non-essential metals and FPG levels in Chinese older adults without diabetes. This study included 2362 older adults without diabetes. Urinary concentrations of five non-essential metals, i.e., cesium (Cs), aluminum (Al), thallium (Tl), cadmium (Cd), and arsenic (As), were detected by inductively coupled plasma mass spectrometry (ICP-MS). The associations of single metals and the metal mixture with FPG levels were assessed using linear regression and Bayesian kernel machine regression (BKMR) models, respectively. Adjusted single-metal linear regression models showed positive associations of urinary Al (β = 0.016, 95%CI: 0.001-0.030) and Cs (β = 0.018, 95%CI: 0.006-0.031) with FPG levels. When comparing the 2th, 3th, and 4th quartiles of urine Cs to its 1th quartile, the significant associations between Cs and FPG levels were found and presented as an "inverted U" trend (βQ2 vs. Q1: 0.034; βQ3 vs. Q1:0.054; βQ4 vs. Q1: 0.040; all P<0.05). BKMR analyses showed urinary level of Cs exhibited an "inverted U" shape association with FPG levels. Moreover, the FPG levels increased linearly with the raised levels of the non-essential metal mixture, and the posterior inclusion probability (PIP) of Cs was the highest (0.92). Potential positive interaction of As and Cs on FPG levels was found in BKMR model. Stratified analysis displayed significant interactions of hyperlipidemia and urine Cs or Tl on FPG levels. An inverse U-shaped association between Cs and FPG was found, individually and as mixture. The FPG levels increased with the raised levels of the non-essential metal mixture, and Cs was the most contributor to FPG levels. Further research is required to confirm the correlation between non-essential metals and FPG levels and to clarify the underlying mechanisms.

Evaluation of the default mode network using nonnegative matrix factorization in patients with cognitive impairment induced by occupational aluminum exposure

Aluminum (Al) is an important environmental pathogenic factor for neurodegenerative diseases, especially mild cognitive impairment (MCI). The aim of this study was to evaluate the gray matter volume of structural covariance network alterations in patients with Al-induced MCI. Male subjects who had been exposed to Al for >10 years were included in the present study. The plasma Al concentration, Montreal cognitive assessment (MoCA) score, and verbal memory assessed by the Rey auditory verbal learning test (AVLT) score were collected from each participant. Nonnegative matrix factorization was used to identify the structural covariance network. The neural structural basis for patients with Al-induced MCI was investigated using correlation analysis and group comparison. Plasma Al concentration was inversely related to MoCA scores, particularly AVLT scores. In patients with Al-induced MCI, the gray matter volume of the default mode network (DMN) was considerably lower than that in controls. Positive correlations were discovered between the DMN and MoCA scores as well as between the DMN and AVLT scores. In sum, long-term occupational Al exposure has a negative impact on cognition, primarily by affecting delayed recognition. The reduced gray matter volume of the DMN may be the neural mechanism of Al-induced MCI.

Whey Protein Dietary Supplements: Metal Exposure Assessment and Risk Characterization

Protein supplements (PS) are trendy foods, especially those made from whey. In addition to providing protein, these products are a source of metals, providing essential elements (Na, K, Mg, Ca, Mo, Mn, Fe, Co, Cu, and Zn) and other potentially toxic elements (Al, B, Sr, V Ba, and Ni). In this study, 47 whey PS samples were analyzed for mineral elements by ICP-OES, and their dietary exposures were assessed for three consumption scenarios. Elements found in higher concentrations were K (4689.10 mg/kg) and Ca (3811.27 mg/kg). The intake of 30 g PS (average recommended amount/day) provides about 20% of the established reference value (NRI) for Cr (18.30% for men and 25.63% for women) and Mo (26.99%). In a high daily consumption scenario (100 g PS/day) and when the maximum concentrations are considered, Cr, Zn, Fe, Mo, and Mg dietary intakes of these metals exceed the daily recommended intakes and could pose a risk. The daily intake of 30, 60, and 100 g of whey PS for 25 years does not pose a health risk since the hazard index (HI) is less than one in these consumption scenarios, and the essential elements contributing most to HI are Co, followed by Mo and Cr. It is recommended to improve the information to the consumers of these new products. Furthermore, to help in the management and prevention of these potential health risks, it would be advisable to improve the regulation of these dietary supplements and their labeling.

Development and validation of a simple microwave-assisted digestion sample preparation technique for the estimation of aluminium and magnesium in a few pharmaceutical dosage forms by an inductively coupled-mass spectrometer (ICP-MS)

Rationale: A simple, sensitive, reliable, validated, inductively coupled plasma mass spectrometric method for the determination of aluminium and magnesium using a simple common microwave-assisted digestion sample preparation technique for a few commonly used formulations was developed and validated according to International Conference on Harmonization Q3D and the United States Pharmacopeia general chapter <232> and <233>. The following pharmaceutical dosage forms were considered for estimation of aluminium and magnesium: Alumina, magnesia simethicone oral suspension, Alumina, magnesia simethicone chewable tablets, alumina and magnesia oral suspension, alumina and magnesium carbonate oral suspension. Methods: The methodology included optimizing a common microwave assisted digestion method, selecting the isotopes, choosing the measurement technique, and designating internal standards. The finalized microwave assisted procedure was a two-step program where in the first step the samples were ramped for 10 min to a temperature of 180 °C and hold for 5 min followed by ramping for 10 min to a temperature of 200 °C and hold for 10 min. Magnesium (24Mg) and aluminium (27Al) isotopes were finalized, internal standard assigned for both the isotopes was yttrium (89Y) with Helium (kinetic energy discrimination-KED) as the measuring mode. System suitability was run before initiating analysis to ensure that system performance was consistent. Results: Analytical validation parameters like specificity, linearity (from 25% to 200% of sample concentration), the detection limit and the limit of quantification were established. For all these dosage forms, the method's precision was demonstrated by analyzing the percentage relative standard deviation for six injections. Accuracy was established from 50% to 150% of instrument working concentration (J-levels) for aluminium and magnesium for all the formulations and was found to be within the range of 90-120%. Conclusion: This common analysis method, along with the common microwave-digestion technique applies to numerous types of matrices for a finished dosage form with aluminium and magnesium.

A review of iron use and recycling in municipal wastewater treatment plants and a novel applicable integrated process

Chemical methods are expected to play an increasingly important role in carbon-neutral municipal wastewater treatment plants. This paper briefly summarises the enhancement effects of using iron salts in wastewater and sludge treatment processes. The costs and environmental concerns associated with the widespread use of iron salts have also been highlighted. Fortunately, the iron recovery from iron-rich sludge provides an opportunity to solve these problems. Existing iron recovery methods, including direct acidification and thermal treatment, are summarised and show that acidification treatment of FeS digestate from the anaerobic digestion-sulfate reduction process can increase the iron and sulphur recycling efficiency. Therefore, a novel applicable integrated process based on iron use and recycling is proposed, and it reduces the iron salts dosage to 4.2 mg/L and sludge amount by 80%. Current experimental research and economic analysis of iron recycling show that this process has broad application prospects in resource recovery and sludge reduction.

Determination by ICP-MS of Essential and Toxic Trace Elements in Gums and Carrageenans Used as Food Additives Commercially Available in the Portuguese Market

Gums and carrageenans are food additives widely used in food preparations to improve texture and as viscosifiers. Although they are typically added in small amounts, nowadays people tend to use more and more pre-prepared food. In this work, the content of a wide panel of trace elements in commercial products were analyzed. Carrageenans and gums (n = 13) were purchased in the Portuguese market and were from European suppliers. Samples were solubilized by closed-vessel microwave-assisted acid digestion and analyzed by ICP-MS. Globally, the content of essential trace elements decreased in the following order: Fe (on average, on the order of several tens of µg/g) > Mn > Zn > Cr > Cu > Co > Se > Mo (typically < 0.1 µg/g), while the content of non-essential/toxic trace elements decreased in the following order: Al > Sr > Rb > As > Li > Cd > Pb > Hg. The consumption of these food additives can significantly contribute to the daily requirements of some essential trace elements, namely Cr and Mo. The toxic trace elements Cd, As, Pb, and Hg were below the EU regulatory limits in all analyzed samples. Additional research is needed to define the potential risk of introducing toxic trace elements into food products through the use of these additives.

Toxic Elemental Impurities in Herbal Weight Loss Supplements; A Study Using ICP-OES Microwave-Assisted Digestion

The tendency of using weight loss herbal preparations is continuously increasing, especially for the widespread consumption of junk food that is characterized by high calories. Weight loss herbal preparations are considered a type of food supplement product, and, as such, the regulations governing their quality control might be minimal. These products could be locally formulated in any country or internationally imported. Being non-controlled products, the herbal weight-loss products may contain high levels of elemental impurities that might exceed the permissible ranges. Moreover, these products contribute to the total daily intake (TDI) of such elements, which might represent concerns about their potential toxicological danger. In this research, the elemental contents in such products were investigated. The inductively coupled plasma with optical emission spectrometer (ICP-OES) was used to determine the levels of 15 elemental contents, namely, Na, K, Ca, Mg, Al, Cu, Fe, Li, Mn, As, Co, Cr, Cd, Ni and Pb. The results showed that seven micro-elements, namely Cd, Co, Ni, Cr, Pb, Li and Cu, were either not detectable or at a concentration much lower than their tolerable limits. However, all studied macro-elements (Na, K, Ca and Mg), together with Fe, were found at considerable, yet safe levels. On the other hand, Mn, Al and As contents showed perturbing levels in some of the studied products. Finally, a conclusion was highlighted for the necessity for stricter surveillance of such herbal products.

Fluorescence Turn-on Detection of Alkaline Phosphatase Activity and Al3+ Using Vitamin B6 Cofactor Conjugated GSH Capped Mn-doped ZnS Quantum Dots

The glutathione (GSH) functionalized Mn-doped ZnS quantum dots (GSH_Mn_ZnS QDs) was conjugated with pyridoxal 5'-phosphate (PLP). The -CHO group of vitamin B₆ cofactor PLP interacted with the -NH₂ group of GSH functionalized Mn_ZnS QDs. The conjugation of PLP quenched the fluorescence emission of GSH_Mn_ZnS QDs at 601 nm. Addition of alkaline phosphatase (ALP) catalytically dephosphorylated the PLP into pyridoxal that restored the fluorescence emission of GSH_Mn_ZnS QDs. With a sensitivity of 0.035 U/L, the PLP conjugated GSH_Mn_ZnS QDs was applied to quantify ALP activity in human serum and plasma. Further, the developed nanoprobe PLP conjugated GSH_Mn_ZnS QDs was also applied to detect Al³⁺. The complexation-induced fluorescence enhancement was observed at 492 nm upon the interaction of Al³⁺ with the PLP conjugated GSH_Mn_ZnS QDs. Without any interference from other tested metal ions, this nanoprobe can be employed to detect Al³⁺ down to 2.30 µM.

A review on borate bioactive glasses (BBG): effect of doping elements, degradation, and applications

Because of their excellent biologically active qualities, bioactive glasses (BGs) have been extensively used in the biomedical domain, leading to better tissue-implant interactions and promoting bone regeneration and wound healing. Aside from having attractive characteristics, BGs are appealing as a porous scaffold material. On the other hand, such porous scaffolds should enable tissue proliferation and integration with the natural bone and neighboring soft tissues and degrade at a rate that allows for new bone development while preventing bacterial colonization. Therefore, researchers have recently become interested in a different BG composition based on borate (B₂O₃) rather than silicate (SiO₂). Furthermore, apatite synthesis in the borate-based bioactive glass (BBG) is faster than in the silicate-based bioactive glass, which slowly transforms to hydroxyapatite. This low chemical durability of BBG indicates a fast degradation process, which has become a concern for their utilization in biological and biomedical applications. To address these shortcomings, glass network modifiers, active ions, and other materials can be combined with BBG to improve the bioactivity, mechanical, and regenerative properties, including its degradation potential. To this end, this review article will highlight the details of BBGs, including their structure, properties, and medical applications, such as bone regeneration, wound care, and dental/bone implant coatings. Furthermore, the mechanism of BBG surface reaction kinetics and the role of doping ions in controlling the low chemical durability of BBG and its effects on osteogenesis and angiogenesis will be outlined.

Catalysts as Key Enablers for the Synthesis of Bioplastics with Sophisticated Architectures

Bioplastics are one of the answers to environmental pollution and linear material flows. The most promising bioplastic polylactide (PLA) is already replacing conventional plastics in a number of applications. The properties of PLA, however, do not fit for all potential application areas, but they can be altered by the introduction of comonomers. The copolymerization of lactide (LA) with other lactones like ϵ-caprolactone (CL) has been established for several years. Nevertheless, controlling copolymerizations remains a challenge due to the high complexity of the system. Copolymerization of LA with other monomer classes is much less investigated, but has the chance to overcome the limitations in material properties that occur when only lactones are used. The crucial factor for all copolymerizations is the catalyst. It dominates the reaction kinetics and determines the resulting microstructure. In this review, copolymerization catalysts for LA are presented divided into catalysts for the synthesis of lactone block copolymers, lactone random copolymers, and multimechanistically synthesized copolymers. The selected catalysts are highlighted either owing to their industrially applicable polymerization conditions or their non-standard mechanism.

PEO Coatings Modified with Halloysite Nanotubes: Composition, Properties, and Release Performance

In this work, the properties of the coatings formed on the Mg-Mn-Ce alloy by plasma electrolytic oxidation (PEO) in electrolytes containing halloysite nanotubes (HNTs) were investigated. The incorporation of halloysite nanotubes into the PEO coatings improved their mechanical characteristics, increased thickness, and corrosion resistance. The studied layers reduced corrosion current density by more than two times in comparison with the base PEO layer without HNTs (from 1.1 × 10^-7 A/cm² to 4.9 × 10^-8 A/cm²). The presence of halloysite nanotubes and products of their dihydroxylation that were formed under the PEO conditions had a positive impact on the microhardness of the obtained layers (this parameter increased from 4.5 ± 0.4 GPa to 7.3 ± 0.5 GPa). In comparison with the base PEO layer, coatings containing halloysite nanotubes exhibited sustained release and higher adsorption capacity regarding caffeine.

Investigation of Trace Elements in Vegan Foods by ICP-MS After Microwave Digestion

Veganism is gaining popularity around the world day by day. Vegan nutrition is a diet in which not all animal foods are used. A vegan diet does not contain meat, fish, milk and dairy products, and eggs and consists of vegetables, fruits, grains, legumes, and nuts. Vegan diets maintain energy balances in a wide variety of plant foods. So, health problems can be seen due to nutrient and mineral deficiencies in the long-term continuation of the vegan diet. Due to insufficient intake of vitamins and minerals such as vitamin D, vitamin B12, calcium, iron, and zinc, energy and protein balance in the body may not be achieved by vegan individuals. The contents of aluminum, chromium, manganese, iron, cobalt, nickel, copper, zinc, arsenic, mercury, cadmium, and lead have been analyzed by inductively coupled plasma mass spectrometer (ICP-MS) in 10 different vegan foods purchased from Turkey. Certified reference material (1547 peach leaves) was used for validating the digestion procedure. Dry, wet, and microwave processes were compared, and it was found that the microwave digestion method was the best. Element levels in the analyzed samples were found below the legal limits. The purpose of this work is to investigate the trace element content of various foods used in vegan nutrition.

Multielement determination (essential and potentially toxic elements) in eye shadows exposed to consumption in Brazil using ICP OES

Worldwide, cosmetics (especially eye shadows) are widely consumed and have a great impact on the economy. The aim of this study was to determine the multielement composition, focusing on essential and potentially toxic elements, in cosmetics (eye shadow) exposed to consumption in Brazil. Concentrations of 17 elements (Al, As, Ba, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Sr, Ti, V and Zn) were determined in samples (produced in China and Brazil) using a sequential optical emission spectrometer with inductively coupled plasma (ICP OES) after acid digestion, assisted by a closed digester block (6 mL of HNO₃ + 2 mL of H₂O₂ + 1 mL of Triton ×-100 + 1 mL of ultrapure water). The method was validated by linearity, precision, accuracy, limits of detection (LoD) and quantification (LoQ). The elements were quantified (in µg g^-1): Al (852-21,900), Ba (3.47-104), Cd (1.70-6.93), Cr (< 8.53-66.6), Cu (< 0.480-14.5), Mn (92.20-1,190), Ni (< 4.23-40.7), Pb (< 2.16-5.06), Sb (1.10-10.5), Sr (0.760-46.0), Ti (32.0-440), V (< 0.85-1.7) and Zn (24.90-2,600). As, Co, Mo and Se in all the investigated samples were found to be below the LoQ values of ICP OES. In this study, regardless of sample compositions and origins (Brazilian or Chinese), high levels of Al, Cd, Cr, Cu, Mn, Ni, Pb, Sb, Ti, V and Zn were observed, exceeding the recommended maximum tolerable limits, according to Brazilian and global legislations, which may present potential risks to human health and the environment.

Differentiating Wild and Apiary Honey by Elemental Profiling: a Case Study from Mangroves of Indian Sundarban

Honey is a natural substance produced by honeybees from the nectar or secretion of flowering plants. Along with the botanical and geographical origin, several environmental factors also play a major role in determining the characteristics of honey. The aim of this study is to determine and compare the elemental concentration of various macro and trace elements in apiary and wild honeys collected from different parts of Indian Sundarbans. The elemental analysis was performed in inductively coupled plasma optical emission spectroscopy preceded by microwave digestion method. The concentrations of 19 elements (Ag, Al, As, B, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Se and Zn) were investigated from thirteen locations of Indian Sundarbans. This comparative study shows in wild honey samples, the concentration of K was highest followed by Ca, Mg and Na and Zn was lowest among all. In contrast, in apiary honey samples, Ca had maximum concentration followed by K, Mg and Na and Ag had minimum among all. The elemental concentration in honey from apiary was either equal or higher than their wild counterpart. The results of the factor analysis of PCA algorithm for wild and apiary honey samples were highly variable which implies that the elements are not coming from the same origin. The concentration of element was found to be highly variable across sites and across sources of honey samples.

The quintessence of metallomics: a harbinger of a different life science based on the periodic table of the bioelements

This year marks the 20th anniversary of the field of metallomics. As a landmark in time, it is an occasion to reflect on the past, present, and future of this integrated field of biometal sciences. A fundamental bias is one reason for having metallomics as a scientific discipline. The focus of biochemistry on the six non-metal chemical elements, collectively known with the acronym SPONCH (sulphur, phosphorus, oxygen, nitrogen, carbon, hydrogen), glosses over the fact that the lower quantities of many other elements have qualities that made them instrumental in the evolution of life and pivotal in numerous life processes. The metallome, alongside the genome, proteome, lipidome, and glycome, should be regarded as a fifth pillar of elemental-vis-à-vis molecular-building blocks in biochemistry. Metallomics as 'global approaches to metals in the biosciences' considers the biological significance of most chemical elements in the periodic table, not only the ones essential for life, but also the non-essential ones that are present in living matter-some at higher concentrations than the essential ones. The non-essential elements are bioactive with either positive or negative effects. Integrating the significance of many more chemical elements into the life sciences requires a transformation in learning and teaching with a focus on elemental biology in addition to molecular biology. It should include the dynamic interactions between the biosphere and the geosphere and how the human footprint is changing the ecology globally and exposing us to many additional chemical elements that become new bioelements.

Thermosensitive PLGA–PEG–PLGA Hydrogel as Depot Matrix for Allergen-Specific Immunotherapy

Allergen-specific immunotherapy (AIT) is the only currently available curative treatment option for allergic diseases. AIT often includes depot-forming and immunostimulatory adjuvants, to prolong allergen presentation and to improve therapeutic efficacy. The use of aluminium salts in AIT, which are commonly used as depot-forming adjuvants, is controversially discussed, due to health concerns and Th2-promoting activity. Therefore, there is the need for novel delivery systems in AIT with similar therapeutic efficacy compared to classical AIT strategies. In this study, a triblock copolymer (hydrogel) was assessed as a delivery system for AIT in a murine model of allergic asthma. We show that the hydrogel combines the advantages of both depot function and biodegradability at the same time. We further demonstrate the suitability of hydrogel to release different bioactive compounds in vitro and in vivo. AIT delivered with hydrogel reduces key parameters of allergic inflammation, such as inflammatory cell infiltration, mucus hypersecretion, and allergen-specific IgE, in a comparable manner to standard AIT treatment. Additionally, hydrogel-based AIT is superior in inducing allergen-specific IgG antibodies with potentially protective functions. Taken together, hydrogel represents a promising delivery system for AIT that is able to combine therapeutic allergen administration with the prolonged release of immunomodulators at the same time.

Wear Resistance of Plasma Electrolytic Oxidation Coatings on Ti-6Al-4V Eli Alloy Processed by Additive Manufacturing

The additive manufacturing (AM) technique can produce Ti-6Al-4V ELI (extra low interstitial) alloy for personalized biomedical devices. However, the Ti-6Al-4V ELI alloy presents poor tribological behavior. Regarding this, coatings are a feasible approach to improve the wear resistance of this alloy. In the literature, the tribological behavior of TiO2 coatings incorporated with Ca and P formed by one-step plasma electrolytic oxidation (PEO) on Ti-6Al-4V ELI alloy processed by AM has not been investigated. Thus, in the present work, it was studied the influence of Ti-6Al-4V ELI alloy processed by AM on the wear resistance and morphologic of the coating obtained by PEO (plasma electrolytic oxidation). In this way, three different voltages (200, 250, and 300 V) were employed for the PEO process and the voltage effect on the properties of the coatings. The coatings were characterized by contact profilometry, scanning electron microscopy, energy-dispersive spectroscopy, the sessile drop method, grazing-incidence X-ray diffraction, and wear tests, on a ball-on-plate tribometer. The increase in applied voltage promoted an increase in roughness, pore area, and a decrease in the pore population of the coatings. In addition, the coatings, mainly composed of anatase and rutile, showed good adhesion to the metallic substrate, and the presence of bioactive elements Ca and P were detected. The thickness of the coatings obtained by PEO increases drastically for voltages higher than 250 V (from 4.50 ± 0.33 to 23.83 ± 1.5 µm). However, coatings obtained with lower voltages presented thin and dense layers, which promoted a superior wear resistance (increase in wear rate from 1.99 × 10−6 to 2.60 × 10−5 mm3/s). Finally, compared to the uncoated substrate, the PEO coatings increased the wear resistance of the titanium alloy obtained by AM, also showing a superior wear resistance compared to the commercial Ti-6Al-4V alloy previously evaluated, being such a positive and promising behavior for application in the area of metallic implants.

Teaching the chemical elements in biochemistry: Elemental biology and metallomics

Biochemistry primarily focuses on the non-metal chemical elements carbon, oxygen, nitrogen, hydrogen, sulfur, and phosphorus in the four groups of building blocks (sugars, lipids, amino acids, and nucleotides) and the corresponding macromolecules. However, at least 10 essential chemical elements of life are metals. This article discusses the consequences of such a bias, presents current knowledge that over 20 chemical elements are required for life, and makes a case for-and suggests benefits of-teaching elemental biology alongside molecular biology and biochemistry, and inorganic chemistry in addition to organic chemistry. A relatively new interdisciplinary field, metallomics, has the potential to be a platform for integration when added to glycomics, lipidomics, proteomics, and genomics. It would fill a major gap in contemporary education, be relevant for many areas of science, and facilitate the teaching of important principles of chemistry in the biological sciences, thus helping students to gain a broader understanding of life processes from the molecular to the systemic biology level.

Cytotoxicity and Ion Release of Functionally Graded Al₂O₃- Ti Orthopedic Biomaterial

The aim of this study was to evaluate the biocompatibility of Al2O3-Ti functionally graded material (FGM) successfully fabricated by Spark Plasma Sintering (SPS) technology, and to compare with pure Ti and alumina. Pre-osteoblast MC3T3-E1 cells were used to examine cell viability, proliferation and differentiation using lactate dehydrogenase (LDH) cytotoxicity detection kit, MTT assay and Alkaline Phosphatase (ALP) colorimetric test at different time points. Furthermore, ion release from the materials into the culture medium was assessed. The results showed cell viability over 80% for FGM and alumina which dismissed any cytotoxicity risk due to materials or manufacturing. The results of MTT tests identified superiority of FGM than Ti and alumina, particularly in late proliferation. Nevertheless, in cell differentiation, all materials performed similarly with no statistical differences. Furthermore, it was indicated that Ti had no ion release, while alumina had small amount of Al ion dissolution. FGM, however, had more ions detachment, particularly Al ions.

Counterions determine uptake and effects of aluminum in human intestinal and liver cells

Aluminum (Al) is highly abundant in the biosphere and can occur in different physico-chemical states. It is present in human food and undergoes transitions between dissolved and particulate species during the passage of the gastrointestinal tract. Moreover, in a complex matrix such as food different inorganic and organic counterions can affect the chemical behavior of Al following oral uptake. In this work, the effects of different counterions, namely chloride, citrate, sulfate, lactate and acetylacetonate, on Al uptake and toxicity in the human intestine are studied. The respective Al salts showed different dissolution behavior in biological media and formed nanoscaled particles correlating in reverse with the amount of their dissolved fraction. The passage through the intestinal barrier was studied using a Caco-2 Transwell® system, showing counterion-dependent variance in cellular uptake and transport. In addition, Al toxicity was investigated using Al species (Al³⁺, metallic Al⁰ and oxidic γAl₂O₃ nanoparticles) and counterions individually or in mixtures on Caco-2 and HepG2 cells. The strongest toxicity was observed using a combination of Al species, depending on solubility, and the lipophilic counterion acetylacetonate. Notably, only the combination of both led to toxicity, while both substances individually did not show toxic effects. A toxification of previously non-toxic Al-species by the presence of acetylacetonate is shown here for the first time. The dependency on the concentration of free Al ions was demonstrated using sodium hydrogen phosphate, which was able to counteract the toxic effects by complexing free Al ions. These findings, using Al salts as an example for a common food contaminant, underline the importance of a consideration of the chemical properties of human nutrition, especially dissolution and hydrophobicity, which can significantly influence the cellular uptake and effects of xenobiotic substances.

Was amorphous aluminium hydroxyphosphate sulfate adequately evaluated before authorisation in Europe?

The Merck Sharp & Dohme Corp aluminium adjuvant 'amorphous aluminium hydroxyphosphate sulfate' (AAHS), primarily used in the Gardasil vaccines against human papilloma virus, has been criticised for lack of evidence for its safety. Documentation from Danish authorities and answers from the European Medicines Agency (EMA) suggest that AAHS may not have been sufficiently evaluated. Documentation from the Danish Medicines Agency shows discrepancies in the trial documents of two prelicensure clinical trials with Gardasil in 2002 and 2003. For both trials, the Agency seems to have authorised potassium aluminium sulfate as the adjuvant and not AAHS. In addition, the participants in the trial launched in 2002 were informed that the comparator was saline, even though the comparator was AAHS in an expedient consisting of L-histidine, polysorbate-80, sodium borate and sodium chloride. According to the EMA, AAHS was first introduced in Europe in 2004 as the adjuvant in Procomvax, a vaccine against the hepatitis B virus and Haemophilus influenza type b. The EMA reports that AAHS was introduced without any prelicensure safety evaluation. The adjuvant is described by the company to be both physically and functionally distinct from all other previously used aluminium adjuvants. There is a need for rigorous evaluation of benefits and harms of the adjuvant AAHS.

Metals and Metal-Nanoparticles in Human Pathologies: From Exposure to Therapy

An increasing number of pathologies correlates with both toxic and essential metal ions dyshomeostasis. Next to known genetic disorders (e.g., Wilson's Disease and β-Thalassemia) other pathological states such as neurodegeneration and diabetes are characterized by an imbalance of essential metal ions. Metal ions can enter the human body from the surrounding environment in the form of free metal ions or metal-nanoparticles, and successively translocate to different tissues, where they are accumulated and develop distinct pathologies. There are no characteristic symptoms of metal intoxication, and the exact diagnosis is still difficult. In this review, we present metal-related pathologies with the most common onsets, biomarkers of metal intoxication, and proper techniques of metal qualitative and quantitative analysis. We discuss the possible role of drugs with metal-chelating ability in metal dyshomeostasis, and present recent advances in therapies of metal-related diseases.

Simultaneous detection of aqueous aluminum(III) and chromium(III) using Persea americana reduced and capped silver nanoparticles

There is a significant interest to develop sensing devices that detect water toxins, especially heavy metal ions. Although there have already been numerical reports on detecting toxic heavy metal ions, the use of adaptable devices could enable a broader range of sensing applications. Here, we used fresh peel extract (PeA) and dried peel extract (DPeA) of Persea americana (Avocado) as a reducing and capping agent to synthesize and stabilize AgNPs. The dimensions of NPs were controlled by tuning pH, temperature, and volume of the reducing agent. The sensitivity and selectivity of the AgNPs toward various metal ions viz. Ni(II), Cd(II), Al(III), Hg(II), Cr(III), Ba(II), Pb(II), Zn(II), Co(II), Mn(II), Cu(II), Ca(II), Mg(II), and K(I) were studied. The detection probe was found to be selective and sensitive toward Al(III) and Cr(III) ions with the detection limit of 0.04 ppm and 0.05 ppm, respectively. High-resolution transmission electron microscope (HRTEM), ultraviolet-visible (UV-Vis) spectroscopy, and dynamic light scattering (DLS) analysis results confirm an agglomeration-based mechanism for sensing both metal ions. This method can be exploited for the colorimetric detection of toxic heavy metals in real water samples.

Characterizing the Transport of Aluminum-, Silicon- and Titanium-Containing Particles and Nanoparticles in Mainstream Tobacco Smoke

The most commonly observed forms of aluminum, silicon and titanium in tobacco products are aluminum silicates (e.g., kaolin), silica and titanium(IV) oxide. These compounds are neither water soluble nor volatile at cigarette combustion temperatures. Rather, they are transported in mainstream tobacco smoke as particles after being freed by combustion from the tobacco filler and can induce pulmonary inflammation when inhaled. Aluminum silicate particles are the most frequently observed particles in the pulmonary macrophages of smokers and have become known as 'smokers' inclusions'. A relatively new technique, single particle triple quadrupole inductively coupled plasma-mass spectrometry was used to analyze aluminum-, silicon- and titanium-containing particle deliveries in cigarette and little cigar mainstream tobacco smoke, and to collect information on solid inorganic particles. The mass concentration of aluminum-containing particles transmitted in mainstream smoke was low (0.89-0.56 ng/cigarette), which was not surprising because aluminum silicates are not volatile. Although the collective masses (ng/cigarette) of aluminum-, silicon- and titanium-containing particles under 100 nm diameter transported in mainstream smoke were low, an abundance of 'ultrafine' particles (particles < 100 nm or nanoparticles) was observed. Limitations of the particle background equivalent diameter (the smallest detectable particle size (MassHunter 4.5 Software) due to the environmentally ubiquitous silicon background restricted the determination of silica nanoparticles, but silica particles slightly below 200 nm diameter were consistently detected. Aluminum- and titanium-containing nanoparticles were observed in all cigarette and little cigar samples, with titanium(IV) oxide particle deliveries consistently fewer in number and smaller in diameter than the other two types of particles. The highest concentrations of aluminum-containing particles (as kaolin) were in the nanoparticle range with much lower concentrations extending to the larger particle sizes (>100 nm). The number and range of particle sizes determined in mainstream smoke is consistent with pulmonary deposition of aluminum silicates described by other researchers as contributing to the 'smokers' inclusions' observed in pulmonary macrophages.

Use of Aloe vera as an Organic Coagulant for Improving Drinking Water Quality

The coagulation–flocculation–sedimentation process is widely used for removal of suspended solids and water turbidity reduction. The most common coagulants used to conduct this process are aluminum sulfate and ferric sulfate. In this paper, the use of Aloe vera as a natural-based coagulant for drinking water treatment was tested. The bio-coagulant was used in two different forms: powder as well as liquid; the latter was extracted with distilled water used as a solvent. The obtained results showed that the use of the natural coagulant (Aloe vera) in both powder (AV-Powder) and liquid (AV-H2O) forms reduced the water turbidity at natural pH by 28.23% and 87.84%, respectively. Moreover, it was found that the use of the two previous forms of bio-coagulant for drinking water treatment had no significant influence on the following three parameters: pH, alkalinity, and hardness. The study of the effect of pH on the process performance using Aloe vera as a bio-coagulant demonstrated that the maximum turbidity removal efficiency accounted for 53.53% and 88.23% using AV-Powder and AV-H2O, respectively, at optimal pH 6.

Rhamnus alaternus aqueous extract enhances the capacity of system redox defence and protects hepatocytes against aluminum chloride toxicity in rats

Background

This study was designed to evaluate the protective effects of a Rhamnus alaternus aqueous extract (RAAE) on aluminum chloride-induced hepatotoxicity in rats. A preliminary phytochemical study and antioxidant activity tests of the extract were performed.

Methods

A preliminary phytochemical study and antioxidant activity tests of the extract were performed. For the in vivo study, twenty-four male rats were divided into four groups. The control group (C); the RAAE group treated with 250 mg/kg b.w RAAE; the AlCl3 group, which received 50 mg/kg b.w AlCl3; and the AlCl3/RAAE group that was treated with AlCl3 plus RAAE.

Results

The RAAE contains several phenolic compounds. This plant extract showed a high radical scavenging effect and high antioxidant activity. Administration of AlCl3 resulted in a significant increase in the activities of aspartate aminotransferase and alanine aminotransferase (AST, ALT), alkaline phosphatase (ALP), and lactate dehydrogenase (LDH) and significant decreases in the plasma concentrations of total proteins and albumin. Moreover, AlCl3 induced a hepatic pro-oxidant effect leading to an increase in malonaldehyde (MDA) and carbonyl protein contents, the depletion of the content of reduced glutathione (GSH) and a decrease in the antioxidant enzymatic activities of superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx). However, RAAE supplementation with AlCl3 treatment significantly decreased the levels of MDA and carbonyl proteins and markedly restored the activities of the antioxidant enzymes. These results are supported by the improvement in liver tissue restoration.

Conclusions

The Rhamnus alaternus aqueous extract was shown to have effective antioxidant activity owing to its phenolic compounds protecting against AlCl3-induced liver oxidative damage.

Biosafety and biodegradation studies of AZ31B magnesium alloy carotid artery stent in vitro and in vivo

Biosafety of AZ31B magnesium (Mg) alloy and the effect of its degradation products on tissues, organs, and whole systems are highly needed to be evaluated before clinical application. This study serves a wide variety of safety evaluations of biodegradable AZ31B alloy on nerve cells. As a result of this in vitro study, the maximum aluminum (Al) ion and Mg ion concentrations in the medium were estimated to be 22 μmol/L and 2.75 mmol/L, respectively, during degradation. In addition, the corresponding cell mortality was observed to be 36% and lower than 5% according to the resistance curves of the cell to Mg and Al ions. Furthermore, the maximum Al ion and Mg ion concentrations in serum and cerebrospinal fluid were detected to be 26.1 μmol/L and 1.2 mmol/L, respectively, for 5 months implantation. Combining the result of in vivo dialysis with the result of ion tolerance assay experiments, the actual death rate of nerve cells is estimated between 4 and 10% in vivo, which is lower than the result of in vitro cytotoxicity evaluation. Moreover, no psychomotor disability during clinical studies is observed. Consequently, stent made of AZ31B alloy with surface treatment is feasible for carotid artery stenosis, and it is safe in terms of cell viability on the nervous system.

Metal concentrations of wild mushroom species collected from Belgrad forest (Istanbul, Turkey) with their health risk assessments

Wild edible mushrooms are very popular for both their flavors and nutritional values. However, some mushroom species can be harmful to human health as they accumulate some elements in excessive amounts. The aim of this study was to determine the concentrations of Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, P, Se, and Zn of some wild edible (Agaricus arvensis, A. bitorquis, A. sylvaticus, Amanita vaginata, Armillaria mellea, Clavariadelphus pistillaris, Clitocybe nebularis, Clitopilus prunulus, Hygrophorus marzuolus, H. russula, Lactarius volemus, Lycoperdon molle, and Macrolepiota mastoidea) and non-edible mushroom species (A. citrina, Auricularia mesenterica, Chanterellus melanoxeros, Chondrostereum purpureum, Clathrus ruber, L. controversus, L. helvus, and L. zonarius) collected from Belgrad forest (Istanbul, Turkey). Daily intakes of element (DIE) and health risk index (HRI) values of the edible mushroom species were also calculated. The concentrations of the elements in question were determined to be in the ranges of 9.7-556.8, 2.5-2226.7, 0.06-2.52, 0.03-13.17, 3.74-100.19, 13.3-507.4, 2635.0-28614.0, 493.0-2412.0, 6.97-3150.73, 0.29-13.26, 0.38-3.67, and 9.1-293.8 mg/kg, respectively. The Cd concentration of H. russula (DIE: 1.08, HRI: 1.08), Cr concentration of C. nebularis (DIE: 5.64, HRI: 1.88), and the Cu concentration of M. mastoidea (DIE: 42.94, HRI: 1.07) were above the reference values. The results showed that the long-term consumption of H. russula, C. nebularis, and M. mastoidea collected from Belgrad forest can have a negative impact on human health. Therefore, it was concluded that the element concentrations of edible wild mushrooms in this region should be examined periodically.

Kojic acid derivatives as double face ligands for metal and phosphate ions

A family of combined Kojic acid and polyamine derivatives has been synthesized as phosphate anion and metal ion ligands. The stoichiometry, stability and structure of the ion/ligand adducts were determined by ¹H NMR spectroscopy, potentiometry, EXAFS and DFT calculations. The presented dual ligands bind effectively both phosphate anions and metal ions and could be used as effective ion receptors in challenging water conditions in the broad pH range. A careful analysis of the heatmaps of the stability constants allows to choose the most appropriate ligand for the ion for qualitative and/or quantitative analysis in water, without analyte pre-treatment. Extremely high-water solubility (>0.6 M) and ion(s)/ligand stability of the adducts in the pH 3-11 are the greatest advantages of the presented here molecules over other known ion sensors. The presented here molecules represent an innovative class of dual metal/anion ligands, with perspective of medical and environmental use.

Toxic Elements in Traditional Kohl-Based Eye Cosmetics in Spanish and German Markets

Kohl is a traditional cosmetic widely used in Asia and Africa. In recent years, demand for kohl-based eyelids and lipsticks has increased in Europe, linked to migratory phenomena of populations from these continents. Although the European legislation prohibits the use of heavy metals in cosmetics due to the harmful effects to human health, particularly to pregnant women and children, these elements are still present in certain products. The European Union recommended levels are Pb < 20 ppm, As < 5 ppm, Cd < 5 ppm, Sb < 100 ppm, and Ni < 200 ppm. In Germany, levels are more restrictive: Pb < 2 ppm, As < 0.5 ppm, Cd < 0.1 ppm, Sb < 0.5 ppm, and Ni < 10 ppm. Here, we analyzed 12 kohl-based cosmetics in different presentations (powder, paste, and pencil) that were purchased in Spanish and German local shops. An inductively coupled plasma optical emission spectrophotometer was used to identify toxic elements and heavy metals. Levels of Pb ranged between 1.7 and 410,000 ppm in six of the study samples, four of which had levels above the recommended limit of at least two heavy metals. Arsenic (a carcinogenic element) values were within the range allowed by the EU in only 58% of the studied samples. Moreover, two products doubled this limit, reaching levels of 9.2 and 12.6 ppm. In one of the products, cadmium, related to toxic keratitis, was four times higher (20.7 ppm) than that allowed, while in two other products, these limits were doubled (11.8 and 12.7 ppm). Our results indicate the need to supervise the manufacture of kohl-based traditional products and the analysis of their composition prior distribution in European countries.