Chitosan-silicon nanofertilizer to enhance plant growth and yield in maize (Zea mays L.)

Synthesis and characterization of novel histidine functionalized chitosan nanoformulations and its bioactivity in tomato plant

The use of novel active ingredients for the functional modification of chitosan nanoformulations has attracted global attention. In this study, chitosan has been functionalized via histidine to craft novel chitosan-histidine nanoformulation (C-H NF) using ionic gelation method. C-H NF exhibited elite physico-biochemical properties, influencing physiological and biochemical dynamics in Tomato. These elite properties include homogenous-sized nanoparticles (314.4 nm), lower PDI (0.218), viscosity (1.43 Cps), higher zeta potential (11.2 mV), nanoparticle concentration/ml (3.53 × 108), conductivity (0.046 mS/cm), encapsulation efficiency (53%), loading capacity (24%) and yield (32.17%). FTIR spectroscopy revealed histidine interaction with C-H NF, while SEM and TEM exposed its porous structure. Application of C-H NF to Tomato seedling and potted plants through seed treatment and foliar spray positively impacts growth parameters, antioxidant-defense enzyme activities, reactive oxygen species (ROS) content, and chlorophyll and nitrogen content. We claim that the histidine-functionalized chitosan nanoformulation enhances physico-biochemical properties, highlighting its potential to elevate biochemical and physiological processes of Tomato plant.

Unravelling the effects of nano SiO2, nano TiO2 and their nanocomposites on Zea mays L. growth and soil health

Amidst the challenges posed by climate change, exploring advanced technologies like nanotechnology is crucial for enhancing agricultural productivity and food security. Consequently, this study investigated the impact of nano SiO2 (nSiO2), nano TiO2 (nTiO2) and SiO2/TiO2 nanocomposites (NCs) on 30-day-old Zea mays L. plants and soil health at concentrations of 100 and 200 ppm. Results showed that nSiO2 and nTiO2 at 100 ppm and SiO2/TiO2 NCs at both concentrations, positively influenced plant growth, with the best stimulation observed at 200 ppm of SiO2/TiO2 NCs. Improved plant growth was associated with higher chlorophyll content, photosynthetic rate, transpiration rate, stomatal conductance, rhizospheric N-fixing and phosphate solubilizing bacterial population and plant nutrient uptake. Additionally, treated plants exhibited increased cellulose and starch levels. Malondialdehyde (MDA) content was lower or similar to that of the control, except at 200 ppm of nTiO2-treated shoots. Antioxidant enzyme activities fluctuated, indicating physiological adjustments. Overall, 100 ppm of nTiO2 as well as nSiO2 and 100 and 200 ppm of SiO2/TiO2 NCs improved soil fertility and Z. mays growth, suggesting potential benefits for sustainable agriculture. The findings lay the foundation for more comprehensive investigations into the long-term fate of nanomaterials in soil and their intricate molecular-level interactions with Z. mays.

Development of amine-functionalized fluorescent silica nanoparticles from coal fly ash as a sustainable source for nanofertilizer

Scaling up the synthesis of fluorescent silica nanoparticles to meet the current demand in diverse applications involves technological limitations. The present study relates to the hydrothermal synthesis of water-soluble, crystalline, blue-emitting amine-functionalized silica nanoparticles from coal fly ash sustainably and economically. This study used tertiary amine (trimethylamine) to prepare amine-functionalized fluorescent silica nanoparticles, enhancing fluorescence quantum yield and nitrogen content for nanofertilizer application. The TEM and FESEM studies show that the silica nanoparticles have a spherical morphology with an average diameter of 4.0 nm. The x-ray photoelectron and Fourier transform infrared spectroscopy studies reveal the presence of the amine group at the surface of silica nanoparticles. The silica nanoparticles exhibit blue fluorescence with an emission maximum of 454 nm at 370 nm excitation and show excitation-dependent emission properties in the aqueous medium. With the perfect spectral overlap between silica nanoparticle emission (donor) and chlorophyll absorption (acceptor), fluorescent silica nanoparticles enhance plant photosynthesis rate by resonance energy transfer. This process accelerates the photosynthesis rate to improve the individual plant's quality and growth. These findings suggested that the fly ash-derived functionalized silica nanoparticles could be employed as nanofertilizers and novel delivery agents.

Nano-enabled seed treatment: A new and sustainable approach to engineering climate-resilient crops

Under a changing climate, keeping the food supply steady for an ever-increasing population will require crop plants adapted to environmental fluctuations. Genetic engineering and genome-editing approaches have been used for developing climate-resilient crops. However, genetically modified crops have yet to be widely accepted, especially for small-scale farmers in low-income countries and some societies. Nano-priming (seed exposure to nanoparticles, NPs) has appeared as an alternative to the abovementioned techniques. This technique improves seed germination speed, promotes seedlings' vigor, and enhances plant tolerance to adverse conditions such as drought, salinity, temperature, and flooding, which may occur under extreme weather conditions. Moreover, nano-enabled seed treatment can increase the disease resistance of crops by boosting immunity, which will reduce the use of pesticides. This unsophisticated, farmer-available, cost-effective, and environment-friendly seed treatment approach may help crop plants fight climate change challenges. This review discusses the previous information about nano-enabled seed treatment for enhancing plant tolerance to abiotic stresses and increasing disease resistance. Current knowledge about the mechanisms underlying nanomaterial-seed interactions is discussed. To conclude, the review includes research questions to address before this technique reaches its full potential.

Recent Trends in Foliar Nanofertilizers: A Review

It is estimated that 40-70%, 80-90% and 50-90% of the conventional macronutrients N, P and K applied to the soil are lost, respectively, resulting in considerable loss of resources. Compared to conventional fertilizers, nanofertilizers have the advantages of controlled release, high nutrient utilization, low cost and relatively low environmental pollution due to their small size (1-100 nm) and high specific surface area. The application of nanofertilizers is an up-and-coming field of agricultural research and is an attractive and economical substitute for common fertilizers which can boost global food productivity sustainably. Foliar fertilization is a popular way to satisfy the needs of higher plants. Because of its small application dose, faster nutrient uptake than soil application and relatively less environmental pollution, foliar fertilization is more popular among plants. It can be seen that nanofertilizers and foliar fertilization are the hotspots of attention at present and that current research on the foliar application of nanofertilizers is not as extensive as that on soil application. Based on this background, this paper provides an overview of various applications of foliar spraying of nanofertilizers in agriculture, including applications in improving crop yield and quality as well as mitigating heavy metal stress, salt stress and drought stress.

Zn nutrients-loaded chitosan nanocomposites and their efficacy as nanopriming agents for maize (Zea mays) seeds

Recent breakthroughs in agro-inputs research have led to the development of nanomaterials that can promote precision agriculture and better environmental security. The agricultural sector is increasingly facing the negative impacts of changing climates due to various stress conditions. To curb this scenario, economical and low-risk practices such as decreasing fertilizer inputs and seed priming have been promoted. In the current study, the H. odoratissimum aqueous extract was used to nucleate the Zn ionic species and grow the zinc oxide nanoparticles (ZnO NPs). The developed nanocomposites and their ionic zinc precursor were then integrated into tripolyphosphate (TPP)-crosslinked chitosan (CS/TPP) nanostructures by ionic gelation. Advanced physicochemical characterization techniques (SEM, EDS, TEM, DLS, FTIR, TGA, and XPS) were exploited to report the morphology, hydrodynamic size, surface charge, and structural organization of the developed nanomaterials. These revealed positively charged particles with hydrodynamic size in the 149-257 nm range. The NPs were used as priming agents for Zea mays seeds. At 0.04%, the ZnO-loaded CS/TPP NPs achieved higher root and shoot elongation in 10-day old seedlings compared to other treatments. The pristine CS/TPP NPs, Zn(II)-laden CS/TPP NPs, and ZnO-loaded CS/TPP NPs at 0.01% significantly promoted the early seedling development of seeds under salt stress. This represents the first report showing ZnO integrated chitosan nanocomposites as an auspicious nanopriming agent for stimulating the seed germination of maize. The study envisages offering perspectives on utilizing green nanotechnology to improve the early seedling development of maize. Furthermore, it has the potential to contribute towards UN SDG 2, thus addressing the threats to global food insecurity and doubling agricultural productivity by 2030.

Application of green synthesized bimetallic nZVI-Cu nanoparticle as a sustainable alternative to chemical fertilizers to enhance growth and photosynthetic efficiency of rice seedlings

Application of nanomaterials in agriculture has been extensively explored over the past decade leading to a wide ambit of nanoparticle-based agrochemicals. Metallic nanoparticles consisting of plant macro- and micro-nutrients have been used as nutritional supplements for plants through soil amendments, foliar sprays, or seed treatment. However, most of these studies emphasize monometallic nanoparticles which limit the range of usage and effectivity of such nanoparticles (NPs). Hence, we have employed a bimetallic nanoparticle (BNP) consisting of two different micro-nutrients (Cu & Fe) in rice plants to test its efficacy in terms of growth and photosynthesis. Several experiments were designed to assess growth (root-shoot length, relative water content) and photosynthetic parameters (pigment content, relative expression of rbcS, rbcL & ChlGetc.). To determine whether the treatment induced any oxidative stress or structural anomalies within the plant cells, histochemical staining, anti-oxidant enzyme activities, FTIR, and SEM micrographs were undertaken. Results indicated that foliar application of 5 mg L-1 BNP increased vigor and photosynthetic efficiency whereas 10 mg L-1 concentration induced oxidative stress to some extent. Furthermore, the BNP treatment did not perturb the structural integrity of the exposed plant parts and also did not induce any cytotoxicity. Application of BNPs in agriculture has not been explored extensively to date and this study is one of the first reports that not only documents the effectivity of Cu-Fe BNP but also critically explores the safety of its usage on rice plants making it a useful lead to design new BNPs and explore their efficacy.

In situ forming dialdehyde xanthan gum-gelatin Schiff-base hydrogels as potent controlled release fertilizers

Controlled release fertilizer (CRF) hydrogels have blossomed into promising materials in agriculture owing to the sustained release of the fertilizer and also as soil conditioner. Apart from the traditional CRF hydrogels; Schiff-base hydrogels have garnered significant thrust that release nitrogen slowly in addition to reducing the environmental pollution. Herein, we have fabricated Schiff-base CRF hydrogels composed of dialdehyde xanthan gum (DAXG) and gelatin. The formation of the hydrogels was accomplished via the simplistic in situ crosslinking reaction between the aldehyde groups of DAXG and the amino groups of gelatin. The hydrogels acquired a compact network upon increasing the DAXG content in the matrix. The phytotoxic assay on different plants indicated the hydrogels to be nontoxic. The hydrogels demonstrated good water-retention behaviour in soil, along with reusability even after 5 cycles. A controlled release profile for urea was evident from the hydrogels wherein macromolecular relaxation played a crucial role in the release mechanism. Growth assays on Abelmoschus esculentus (Okra) plant presented an intuitive evaluation on the growth and water-holding capacity of the CRF hydrogel. The present work demonstrated a facile preparation of CRF hydrogels to enhance the utilization of urea and retain soil humidity as fertilizer carriers.

Evaluating the Effectiveness of Calcium Silicate in Enhancing Soybean Growth and Yield

The application of silicon (Si) fertilizer positively impacts crop health, yield, and seed quality worldwide. Si is a "quasi-essential" element that is crucial for plant nutrition and stress response but is less associated with growth. This study aimed to investigate the effect of Si on the yield of cultivated soybean (Glycine max L). Two locations, Gyeongsan and Gunwi, in the Republic of Korea were selected, and a land suitability analysis was performed using QGIS version 3.28.1. The experiments at both locations consisted of three treatments: the control, Si fertilizer application at 2.3 kg per plot (9 m × 9 m) (T1), and Si fertilizer application at 4.6 kg per plot (9 m × 9 m) (T2). The agronomic, root, and yield traits, as well as vegetative indices, were analyzed to evaluate the overall impact of Si. The results demonstrated that Si had consistently significant effects on most root and shoot parameters in the two experimental fields, which led to significantly increased crop yield when compared with the control, with T2 (22.8% and 25.6%, representing an output of 2.19 and 2.24 t ha^-1 at Gyeongsan and Gunwi, respectively) showing a higher yield than T1 (11% and 14.2%, representing 1.98 and 2.04 t ha^-1 at Gyeongsan and Gunwi, respectively). These results demonstrate the positive impact of exogenous Si application on the overall growth, morphological and physiological traits, and yield output of soybeans. However, the application of the optimal concentration of Si according to the crop requirement, soil status, and environmental conditions requires further studies.

Simultaneously Cationic and Anionic Dyes Elimination via Magnetic Hydrochar Prepared from Copper Slag and Pinewood Sawdust

In practical wastewater, cationic and anionic dyes usually coexist, while synergistic removal of these pollutants is difficult due to their relatively opposite properties. In this work, copper slag (CS) modified hydrochar (CSHC) was designed as functional material by the one-pot method. Based on characterizations, the Fe species in CS can be converted to zero-valent iron and loaded onto a hydrochar substrate. The CSHC exhibited efficient removal rates for both cationic dyes (methylene blue, MB) and anionic dyes (methyl orange, MO), with a maximum capacity of 278.21 and 357.02 mg·g^-1, respectively, which was significantly higher than that of unmodified ones. The surface interactions of MB and MO between CSHC were mimicked by the Langmuir model and the pseudo-second-order model. In addition, the magnetic properties of CSHC were also observed, and the good magnetic properties enabled the adsorbent to be quickly separated from the solution with the help of magnets. The adsorption mechanisms include pore filling, complexation, precipitation, and electrostatic attraction. Moreover, the recycling experiments demonstrated the potential regenerative performance of CSHC. All these results shed light on the co-removal of cationic and anionic contaminates via these industrial by-products derived from environmental remediation materials.

The use of silicon and mycorrhizal fungi to mitigate changes in licorice leaf micromorphology, chlorophyll fluorescence, and rutin content under water-deficit conditions

In this study, the effects of water-deficit conditions, silicon (Si) fertilizer (300 ppm), and arbuscular mycorrhizal (AM) inoculation by Claroiedoglomus etunicatum were evaluated on several features of licorice (Glycyrrhiza glabra L.). The measurable features were photosynthetic parameters, rutin content in aerial parts, and leaf micromorphology. Drought was administered at five levels determined by the percentage of field capacity (FC), i.e. 100, 80, 60, 40, and 20% of FC. Leaf extracts were utilized for measuring rutin content (via HPLC), and photosynthetic pigments; measurement of stomatal density, and trichome analysis were performed by scanning electron microscopy (SEM). Under severe drought stress, leaf area decreased by 50.84%, compared to well-irrigated plants. A significant decrease in leaf numbers (32.52%) was observed because of deficit irrigation. AM and Si improved chlorophyll fluorescence, which corresponded to the maximum efficiency of photosystem II. Rutin content decreased significantly under deficit irrigation. Also, the integration of AM and Si treatments positively affected rutin quantity under various irrigation regimes. Under moderate stress (60% FC), using AM and/or Si treatments reduced the stomatal length by 61.22 and 52.98%, respectively. Interestingly, a significant reduction in stomatal density towards control was observed as a result of the integrated treatments of Si and AM (58.28% at W₂₀ and 59.82% at W₁₀₀), which helped plants reduce water loss when facing drought stress. Principal component analysis (PCA) showed that photosynthetic pigments, chlorophyll fluorescence, and rutin changed quantitatively under moderate drought stress, while more variations were observed in leaf epidermal micromorphology under severe drought stress. These findings revealed that Si and AM, by exogenous application, synergistically mitigated the effects of drought stress on licorice.

Chitosan nanoparticles support the impact of arbuscular mycorrhizae fungi on growth and sugar metabolism of wheat crop

Arbuscular mycorrhizae fungi (AMF) symbiosis is an indispensable approach in sustainable agriculture. AMF-plant association is likely to be enhanced by the nanoparticle's application. Herein, the impact of chitosan nanoparticles (CSNPs) on the mycorrhizal colonization in wheat has been investigated. The provoked changes in wheat growth, physiology and metabolism were assessed. CSNPs treatment improved AMF colonization (52 %) by inducing the levels of auxins and strigolactones in roots by 32 and 21 %, respectively besides flavonoids exudation into the rhizosphere (9 %). Such supporting action of CSNPs was associated with improved plant biomass production (21 %) compared to AMF treatment. Both treatments synergistically enhanced the photochemical efficiency of photosystem II and stomatal conductance, therefore the photosynthetic rate was increased. The combined application of CSNPs and AMF enhanced accumulation of glucose, fructose, sucrose, and starch (12, 22, 31 and 13 %, respectively), as well as the activities of sucrose-p-synthase, invertases and starch synthase compared to AMF treatment. The synchronous application of CSNPs and AMF promoted the levels of polyphenols, carotenoids, and tocopherols therefore, improved antioxidant capacity (33 %), in the roots. CSNPs can be applied as an efficient biofertilization strategies to enhance plant growth and fitness, beside improvement of health promoting compounds in wheat.

Nanotechnology - A new frontier of nano-farming in agricultural and food production and its development

The potential of nanotechnology for the development of sustainable agriculture has been promising. The initiatives to meet the rising food needs of the rapidly growing world population are mainly powered by sustainable agriculture. Nanoparticles are used in agriculture due to their distinct physicochemical characteristics. The interaction of nanomaterials with soil components is strongly determined in terms of soil quality and plant growth. Numerous research has been carried out to investigate how nanoparticles affect the growth and development of plants. Nanotechnology has been applied to improve the quality and reduce post-harvest loss of agricultural products by extending their shelf life, particularly for fruits and vegetables. This review assesses the latest literature on nanotechnology, which is used as a nano-biofertilizer as seen in the agricultural field for high productivity and better growth of plants, an important source of balanced nutrition for the crop, seed germination, and quality enrichment. Additionally, post-harvest food processing and packaging can benefit greatly from the use of nanotechnology to cut down on food waste and contamination. It also critically discusses the mechanisms involved in nanoparticle absorption and translocation within the plants and the synthesis of green nanoparticles.

Encapsulation with Natural Polymers to Improve the Properties of Biostimulants in Agriculture

Encapsulation in agriculture today is practically focused on agrochemicals such as pesticides, herbicides, fungicides, or fertilizers to enhance the protective or nutritive aspects of the entrapped active ingredients. However, one of the most promising and environmentally friendly technologies, biostimulants, is hardly explored in this field. Encapsulation of biostimulants could indeed be an excellent means of counteracting the problems posed by their nature: they are easily biodegradable, and most of them run off through the soil, losing most of the compounds, thus becoming inaccessible to plants. In this respect, encapsulation seems to be a practical and profitable way to increase the stability and durability of biostimulants under field conditions. This review paper aims to provide researchers working on plant biostimulants with a quick overview of how to get started with encapsulation. Here we describe different techniques and offer protocols and suggestions for introduction to polymer science to improve the properties of biostimulants for future agricultural applications.

Rapid and Effective Lead Elimination Using Cow Manure Derived Biochar: Balance between Inherent Phosphorus Release and Pollutants Immobilization

Cow manure derived biochar (CMBC) can serve as a promising functional material, and CMBC can be regarded as an ecofriendly approach compared to conventional ones. CM bioadsorbent can be employed for heavy metal immobilization (such as for lead) as well as an amendment to increase soil fertility (e.g., phosphorus). Few studies have examined the surface interactions between pollutants and bioadsorbents when inherent nutrient release is present. In this work, CMBC was prepared and applied for Pb(II) removal, and the vital roles of released phosphorus from CMBC were comprehensively disclosed. Furthermore, CMBC could immobilize part of the Pb(II) in soil and promote plant growth. CM400 was an effective adsorbent whose calculated Q_e reached 691.34 mg·g^-1, and it rapidly adsorbed 98.36 mg·g^-1 of Pb(II) within 1 min. The adsorption mechanisms of Pb(II) by CMBC include ion exchange, physical adsorption, electrostatic attraction, chemical precipitation, surface complexation, and cation-π bond interaction. Based on the residual phosphorus content and adsorption effect, complexation rather than the chemical precipitation had a greater contribution toward adsorption. Besides, as the concentration of Pb(II) increased, the main adsorption mechanisms likely transformed from chemical precipitation to ion exchange and complexation. CMBC not only had a good effect on Pb(II) removal in the solution, but also immobilized the Pb(II) in soil to restrain plant uptake as well as promote plant growth. The main novelty of this work is providing more insights to the cow manure bio adsorbent on Pb immobilization and phosphorus release. This study is expected to serve as a basis and reference for analyzing the release effects of inherent nutrients and the interfacial behaviors with heavy metals when using CMBC and other nutrient-rich carbon-based fertilizers for pollution control.

Overview on Recent Developments in the Design, Application, and Impacts of Nanofertilizers in Agriculture

Nutrient management is always a great concern for better crop production. The optimized use of nutrients plays a key role in sustainable crop production, which is a major global challenge as it depends mainly on synthetic fertilizers. A novel fertilizer approach is required that can boost agricultural system production while being more ecologically friendly than synthetic fertilizers. As nanotechnology has left no field untouched, including agriculture, by its scientific innovations. The use of nanofertilizers in agriculture is in the early stage of development, but they appear to have significant potential in different ways, such as increased nutrient-use efficiency, the slow release of nutrients to prevent nutrient loss, targeted delivery, improved abiotic stress tolerance, etc. This review summarizes the current knowledge on various developments in the design and formulation of nanoparticles used as nanofertilizers, their types, their mode of application, and their potential impacts on agricultural crops. The main emphasis is given on the potential benefits of nanofertilizers, and we highlight the current limitations and future challenges related to the wide-scale application before field applications. In particular, the unprecedent release of these nanomaterials into the environment may jeopardize human health and the ecosystem. As the green revolution has occurred, the production of food grains has increased at the cost of the disproportionate use of synthetic fertilizers and pesticides, which have severely damaged our ecosystem. We need to make sure that the use of these nanofertilizers reduces environmental damage, rather than increasing it. Therefore, future studies should also check the environmental risks associated with these nanofertilizers, if there are any; moreover, it should focus on green manufactured and biosynthesized nanofertilizers, as well as their safety, bioavailability, and toxicity issues, to safeguard their application for sustainable agriculture environments.

Trehalose Outperforms Chitosan, Humic Acid and Gamma-Aminobutyric Acid in Promoting the Growth of Field Maize

Despite the fact that there are many distinct types of plant growth regulators (PGRs), the diverse ways in which they regulate plant development are rarely compared. In this study, four PGRs (trehalose, chitosan, humic acid and gamma-aminobutyric acid) were selected and sprayed folially, and plant samples were collected while maize was at vegetative leaf stages 6, 10, and 14 (V6, V10, and V14, respectively) to reveal the effects of different PGRs on photosynthesis, dry matter accumulation, oxidative stress, carbon and nitrogen metabolism, hormone levels, and gene expression of maize. Results showed that 100 mg/L PGRs did not induce oxidative damage or repair activities in maize. Trehalose significantly increased chlorophyll content at V6 and promoted dry matter (roots and shoots) accumulation at V6 and V10. The activities of carbon and nitrogen metabolizing enzymes were significantly enhanced by trehalose treatment, which promoted the accumulation of sucrose and soluble sugar, but did not affect the biosynthesis of auxin and gibberellin at V6. Changes in carbon and nitrogen metabolism enzymes are regulated by transcription of related synthetic genes. Lower starch content and higher sucrose content in trehalose-treated maize leaves are important biological characteristics. Further analysis revealed that the effect of trehalose on the metabolic activity of maize was a short-term promoting effect (0-12 days), while the effect on maize growth was a long-term cumulative effect (13-28 days). Overall, exogenous trehalose induced stronger carbon and nitrogen metabolic activity, higher photosynthetic capacity and more dry matter accumulation than chitosan, humic acid and gamma-aminobutyric acid.

Pretreatment with Chitosan Prevents Fusarium Infection and Induces the Expression of Chitinases and β-1,3-Glucanases in Garlic (Allium sativum L.)

Fusarium infection decreases the yield of garlic (Allium sativum L.); however, the knowledge about garlic response to fungal attack is limited. Chitosan induces plant defense response to stress conditions. Here, we analyzed the effects of chitosan with low (Ch1, 39 kDa) and medium (Ch2, 135 kDa) molecular weight on Fusarium infection in garlic. Ch1 and Ch2 at concentrations 0.125–0.400 mg/mL suppressed the growth of Fusarium proliferatum cultures in vitro. Pretreatment of garlic bulbs with Ch1 or Ch2 prevented disease symptoms after F. proliferatum inoculation, while exerting early inhibitory and late stimulatory effects on chitinase and β-1,3-glucanase activities. Ch1/Ch2 treatment of garlic already infected with F. proliferatum caused transcriptional upregulation of chitinases and β-1,3-glucanases at the early stage, which was maintained at the late stage in Ch2-treated samples, but not in Ch1-treated samples, where transcriptional inhibition was observed. The stimulatory effect of Ch2 pretreatment on the expression of chitinase and endo-β-1,3-glucanase genes was stronger than that of Ch1 pretreatment, suggesting that Ch2 could be more effective than Ch1 in pre-sowing treatment of garlic bulbs. Our results provide insights into the effects of chitosan on the garlic response to Fusarium, suggesting a novel strategy to protect garlic crop against fungal infection.

The potential of foliar application of nano-chitosan-encapsulated nano-silicon donor in amelioration the adverse effect of salinity in the wheat plant

BACKGROUND

Nano-materials ameliorate the adverse effect of salinity stress on the physiological and biochemical processes in plants. The present investigation was designed to evaluate the physiological mechanisms through which a nano-chitosan-encapsulated nano-silicon fertilizer (NC-NS) can ameliorate the adverse effect of salinity stress on the wheat plants, and compare it with nano-chitosan (NC) and nano-silicon (NS) application. Nano-silicon was encapsulated with a chitosan-tripolyphosphate (TPP) nano-matrix by ionic gelation method for its slow release. The wheat plants were exposed to foliar application of distilled water, NC, NS, and NC-NS with two NaCl irrigation levels at 0 (distilled water) and 100 mM.

RESULTS

The foliar application of NC, NS, and NC-NS induced a significant increase in the function of enzymatic and non-enzymatic antioxidant systems of the wheat plants to equilibrate cellular redox homeostasis by balancing H₂O₂ content in the leaves and roots, as compared with salt-stressed plants without treatment. The plant's foliar-sprayed with NC, NS, and NC-NS solution exhibited a significant increase in the molecules with osmotic adjustment potentials such as proline, free amino acids, glycine betaine, and sugars to protect cells against osmotic stress-induced by salinity. The observed increase in the antioxidant power and osmoregulatory at NC, NS, and NC-NS application was accompanied by the protection of lipid membrane, proteins and photosynthetic apparatus against salinity stress.

CONCLUSION

In the present study, the beneficial role of NC, NS, and NC-NS application, particularly NC-NS, in alleviating the adverse effect of salinity stress on antioxidant systems and osmotic adjustment in wheat is well documented. An overview of the result of present study assists researchers in providing a potential solution for this increasing salinization threat in crops.

Sustainable Production of Tomato Plants (Solanum lycopersicum L.) under Low-Quality Irrigation Water as Affected by Bio-Nanofertilizers of Selenium and Copper

Under the global water crisis, utilizing low-quality water sources in agriculture for irrigation has offered an effective solution to address the shortage of water. Using an excess of low-quality water sources may cause serious risks to the environment, which threaten crop safety and human health. Three kinds of irrigation water (0.413, 1.44, and 2.84 dS m−1) were selected under foliar-applied bio-nanofertilizers of selenium (100 mg L−1) and copper (100 mg L−1) in individual and/or combined application. The nanofertilizers were tested on the production of tomato under greenhouse. After harvesting, the quality of tomato yield and soil biology was evaluated. Using saline water for irrigation caused many main features in this study such as increasing the accumulation of salts, soil organic matter, and CaCO3 in soil by 84.6, 32.3, and 18.4%, respectively, compared to control. The highest tomato yield (2.07 kg plant−1) and soluble solids content (9.24%) were recorded after irrigation with low water quality (2.84 dS m−1) and nano-Cu fertilization. The plant enzymatic antioxidants and soil biological activity were decreased in general due to the salinity stress of irrigation water. After 30 days from transplanting, all studied soil biological parameters (soil microbial counts and enzymes) were higher than the same parameters at harvesting (80 days) under different categories of water quality. The values of all soil biological parameters were decreased by increasing water salinity. This study was carried out to answer the question of whether the combined nanofertilizers of selenium and copper can promote tomato production under saline water irrigation. Further investigations are still needed concerning different applied doses of these nanofertilizers.

Priming With Silicon: A Review of a Promising Tool to Improve Micronutrient Deficiency Symptoms

Priming consists of a short pretreatment or preconditioning of seeds or seedlings with different types of primers (biological, chemical, or physical), which activates various mechanisms that improve plant vigor. In addition, stress responses are also upregulated with priming, obtaining plant phenotypes more tolerant to stress. As priming is thought to create a memory in plants, it is impairing a better resilience against stress situations. In today's world and due to climatic change, almost all plants encounter stresses with different severity. Lots of these stresses are relevant to biotic phenomena, but lots of them are also relevant to abiotic ones. In both these two conditions, silicon application has strong and positive effects when used as a priming agent. Several Si seed priming experiments have been performed to cope with several abiotic stresses (drought, salinity, alkaline stress), and Si primers have been used in non-stress situations to increase seed or seedlings vigor, but few has been done in the field of plant recovery with Si after a stress situation, although promising results have been referenced in the scarce literature. This review pointed out that Si could be successfully used in seed priming under optimal conditions (increased seed vigor), to cope with several stresses and also to recover plants from stressful situations more rapidly, and open a promising research topic to investigate, as priming is not an expensive technique and is easy to introduce by growers.

Nano-enabled agrochemicals/materials: Potential human health impact, risk assessment, management strategies and future prospects

Nanotechnology is a rapidly developing technology that will have a significant impact on product development in the next few years. The technology is already being employed in cutting-edge cosmetic and healthcare products. Nanotechnology and nanoparticles have a strong potential for product and process innovation in the food industrial sector. This is already being demonstrated by food product availability made using nanotechnology. Nanotechnologies will have an impact on food security, packaging materials, delivery systems, bioavailability, and new disease detection materials in the food production chain, contributing to the UN Millennium Development Goals targets. Food products using nanoparticles are already gaining traction into the market, with an emphasis on online sales. This means that pre- and post-marketing regulatory frameworks and risk assessments must meet certain standards. There are potential advantages of nanotechnologies for agriculture, consumers and the food industry at large as they are with other new and growing technologies. However, little is understood about the safety implications of applying nanotechnologies to agriculture and incorporating nanoparticles into food. As a result, policymakers and scientists must move quickly, as regulatory systems appear to require change, and scientists should contribute to these adaptations. Their combined efforts should make it easier to reduce health and environmental impacts while also promoting the economic growth of nanotechnologies in the food supply chain. This review highlighted the benefits of a number of nano enabled agrochemicals/materials, the potential health impacts as well as the risk assessment and risk management for nanoparticles in the agriculture and food production chain.

Chitosan Nanoparticles-Based Ionic Gelation Method: A Promising Candidate for Plant Disease Management

By 2050, population growth and climate change will lead to increased demand for food and water. Nanoparticles (NPs), an advanced technology, can be applied to many areas of agriculture, including crop protection and growth enhancement, to build sustainable agricultural production. Ionic gelation method is a synthesis of microparticles or NPs, based on an electrostatic interaction between opposite charge types that contains at least one polymer under mechanical stirring conditions. NPs, which are commonly based on chitosan (CS), have been applied to many agricultural fields, including nanopesticides, nanofertilizers, and nanoherbicides. The CS-NP or CS-NPs-loaded active ingredients (Cu, saponin, harpin, Zn, hexaconazole, salicylic acid (SA), NPK, thiamine, silicon, and silver (Ag)) are effective in controlling plant diseases and enhancing plant growth, depending on the concentration and application method by direct and indirect mechanisms, and have attracted much attention in the last five years. Many crops have been evaluated in in vivo or in greenhouse conditions but only maize (CS-NP-loaded Cu, Zn, SA, and silicon) and soybean (CS-NP-loaded Cu) were tested for manage post flowering stalk rot, Curvularia leaf spot, and bacterial pustule disease in field condition. Since 2019, five of eight studies have been performed in field conditions that have shown interest in CS-NPs synthesized by the ionic gelation method. In this review, we summarized the current state of research and provided a forward-looking view of the use of CS-NPs in plant disease management.

Efficacy of Chitosan Nanoparticle Loaded-Salicylic Acid and -Silver on Management of Cassava Leaf Spot Disease

Leaf spot is one of the most important cassava diseases. Nanotechnology can be applied to control diseases and improve plant growth. This study was performed to prepare chitosan (CS) nanoparticle (NP)-loaded salicylic acid (SA) or silver (Ag) by the ionic gelation method, and to evaluate their effectiveness on reducing leaf spot disease and enhancing the growth of cassava plants. The CS (0.4 or 0.5%) and Pentasodium triphosphate (0.2 or 0.5%) were mixed with SA varying at 0.05, 0.1, or 0.2% or silver nitrate varying at 1, 2, or 3 mM to prepare three formulations of CS-NP-loaded SA named N1, N2, and N3 or CS-NP-loaded Ag named N4, N5, and N6. The results showed that the six formulations were not toxic to cassava leaves up to 800 ppm. The CS-NP-loaded SA (N3) and CS-NP-loaded Ag (N6) were more effective than the remaining formulations in reducing the disease severity and the disease index of leaf spot. Furthermore, N3 at 400 ppm and N6 at 200, 400, and 800 ppm could reduce disease severity (68.9–73.6% or 37.0–37.7%, depending on the time of treatment and the pathogen density) and enhance plant growth more than or equal to commercial fungicide or nano-fungicide products under net-house conditions. The study indicates the potential to use CS-NP-loaded SA or Ag as elicitors to manage cassava leaf spot disease.

Effects of nanofertilizers on soil and plant-associated microbial communities: Emerging trends and perspectives

Modern agricultural practices are relying excessively upon the use of synthetic fertilizers to supply essential nutrients to promote crop productivity. Though useful in the short term, their prolonged and persistent applications are harmful to soil fertility and nutrient dynamics of the rhizospheric microbiome. The application of nanotechnology in form of nanofertilizer provides an innovative, efficient, and eco-friendly alternative to synthetic fertilizers. The nanofertilizers allow a slow and sustained release of nutrients that not only supports plant growth but also conserve the diversity of the beneficial microbiome. Such attributes may help the phytomicrobiome to efficiently mitigate both biotic and abiotic stress conditions. Unfortunately, despite, exceptional efficiency and ease of applications, certain limitations are also associated with the nanofertilizers such as their complicated production process, tenuous transport and dosage-sensitive efficiency. These bottlenecks are causing a delay in the large-scale applications of nanofertilizers in agriculture. This review aims to highlight the current trends and perspectives on the use of nanofertilizers for improving soil fertility with a special focus on their effects on beneficial phyromicrobiome.

The Applications of Nanotechnology in Crop Production

With the frequent occurrence of extreme climate, global agriculture is confronted with unprecedented challenges, including increased food demand and a decline in crop production. Nanotechnology is a promising way to boost crop production, enhance crop tolerance and decrease the environmental pollution. In this review, we summarize the recent findings regarding innovative nanotechnology in crop production, which could help us respond to agricultural challenges. Nanotechnology, which involves the use of nanomaterials as carriers, has a number of diverse applications in plant growth and crop production, including in nanofertilizers, nanopesticides, nanosensors and nanobiotechnology. The unique structures of nanomaterials such as high specific surface area, centralized distribution size and excellent biocompatibility facilitate the efficacy and stability of agro-chemicals. Besides, using appropriate nanomaterials in plant growth stages or stress conditions effectively promote plant growth and increase tolerance to stresses. Moreover, emerging nanotools and nanobiotechnology provide a new platform to monitor and modify crops at the molecular level.

Effects of Silicon and Silicon-Based Nanoparticles on Rhizosphere Microbiome, Plant Stress and Growth

Silicon (Si) is considered a non-essential element similar to cadmium, arsenic, lead, etc., for plants, yet Si is beneficial to plant growth, so it is also referred to as a quasi-essential element (similar to aluminum, cobalt, sodium and selenium). An element is considered quasi-essential if it is not required by plants but its absence results in significant negative consequences or anomalies in plant growth, reproduction and development. Si is reported to reduce the negative impacts of different stresses in plants. The significant accumulation of Si on the plant tissue surface is primarily responsible for these positive influences in plants, such as increasing antioxidant activity while reducing soil pollutant absorption. Because of these advantageous properties, the application of Si-based nanoparticles (Si-NPs) in agricultural and food production has received a great deal of interest. Furthermore, conventional Si fertilizers are reported to have low bioavailability; therefore, the development and implementation of nano-Si fertilizers with high bioavailability could be crucial for viable agricultural production. Thus, in this context, the objectives of this review are to summarize the effects of both Si and Si-NPs on soil microbes, soil properties, plant growth and various plant pathogens and diseases. Si-NPs and Si are reported to change the microbial colonies and biomass, could influence rhizospheric microbes and biomass content and are able to improve soil fertility.

The Potential of Using Chitosan on Cereal Crops in the Face of Climate Change

This review presents the main findings from measurements carried out on cereals using chitosan, its derivatives, and nanoparticles. Research into the use of chitosan in agriculture is growing in popularity. Since 2000, 188 original scientific articles indexed in Web of Science, Scopus, and Google Scholar databases have been published on this topic. These have focused mainly on wheat (34.3%), maize (26.3%), and rice (24.2%). It was shown that research on other cereals such as millets and sorghum is scarce and should be expanded to better understand the impact of chitosan use. This review demonstrates that this chitosan is highly effective against the most dangerous diseases and pathogens for cereals. Furthermore, it also contributes to improving yield and chlorophyll content, as well as some plant growth parameters. Additionally, it induces excellent resistance to drought, salt, and low temperature stress and reduces their negative impact on cereals. However, further studies are needed to demonstrate the full field efficacy of chitosan.

Sustainable Agriculture Systems in Vegetable Production Using Chitin and Chitosan as Plant Biostimulants

Chitin and chitosan are natural compounds that are biodegradable and nontoxic and have gained noticeable attention due to their effective contribution to increased yield and agro-environmental sustainability. Several effects have been reported for chitosan application in plants. Particularly, it can be used in plant defense systems against biological and environmental stress conditions and as a plant growth promoter—it can increase stomatal conductance and reduce transpiration or be applied as a coating material in seeds. Moreover, it can be effective in promoting chitinolytic microorganisms and prolonging storage life through post-harvest treatments, or benefit nutrient delivery to plants since it may prevent leaching and improve slow release of nutrients in fertilizers. Finally, it can remediate polluted soils through the removal of cationic and anionic heavy metals and the improvement of soil properties. On the other hand, chitin also has many beneficial effects such as plant growth promotion, improved plant nutrition and ability to modulate and improve plants’ resistance to abiotic and biotic stressors. The present review presents a literature overview regarding the effects of chitin, chitosan and derivatives on horticultural crops, highlighting their important role in modern sustainable crop production; the main limitations as well as the future prospects of applications of this particular biostimulant category are also presented.

Physio-biochemical responses of wheat plant towards salicylic acid-chitosan nanoparticles

Sustained source-activity is imperative for vigor plant growth and yield. In present study, physio-biochemical responses of wheat plant contributing to source-activity were measured after application of salicylic acid-chitosan nanoparticles (SA-CS NPs). SA-CS NPs slowly release SA for sustained availability to plant. In seedling bioassay, as compared with salicylic acid (SA), SA-CS NPs incurred up to ~1.5 folds increased activities of seed reserve food remobilizing enzymes for substantial mobilization of reserve food to growing seedlings and enhanced seedling vigor index (SVI) by 1.6 folds. At booting stage, foliar application of SA-CS NPs (0.01-0.08%; w/v) enhanced the activities of superoxide dismutase (1.94 folds), catalase (1.33 folds), peroxidase (1.99 folds) and polyphenol oxidase (1.04 folds) in flag leaf. SA-CS NPs further contrived cellular homeostasis by comforting reactive oxygen species (ROS), malondialdehyde (MDA) and proline contents in flag leaf. SA-CS NPs (0.08%; w/v) significantly increased chlorophylls (a-b) contents (1.46 folds), spike length without awns, spike lets per spike and grain weight per pot as compared with SA. Study categorically explicates that slow release of SA from SA-CS NPs could exert significant effect on source-activity by maneuvering various physio-biochemical responses of wheat plant.