Polycationic star polymers with hyperbranched cores for gene delivery

Using RAFT Polymerization Methodologies to Create Branched and Nanogel-Type Copolymers

This review aims to highlight the most recent advances in the field of the synthesis of branched copolymers and nanogels using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is a reversible deactivation radical polymerization technique (RDRP) that has gained tremendous attention due to its versatility, compatibility with a plethora of functional monomers, and mild polymerization conditions. These parameters lead to final polymers with good control over the molar mass and narrow molar mass distributions. Branched polymers can be defined as the incorporation of secondary polymer chains to a primary backbone, resulting in a wide range of complex macromolecular architectures, like star-shaped, graft, and hyperbranched polymers and nanogels. These subcategories will be discussed in detail in this review in terms of synthesis routes and properties, mainly in solutions.

Influence of DNA Type on the Physicochemical and Biological Properties of Polyplexes Based on Star Polymers Bearing Different Amino Functionalities

The interactions of two star polymers based on poly (2-(dimethylamino)ethyl methacrylate) with different types of nucleic acids are investigated. The star polymers differ only in their functionality to bear protonable amino or permanently charged quaternary ammonium groups, while DNAs of different molar masses, lengths and topologies are used. The main physicochemical parameters of the resulting polyplexes are determined. The influence of the polymer' functionality and length and topology of the DNA on the structure and properties of the polyelectrolyte complexes is established. The quaternized polymer is characterized by a high binding affinity to DNA and formed strongly positively charged, compact and tight polyplexes. The parent, non-quaternized polymer exhibits an enhanced buffering capacity and weakened polymer/DNA interactions, particularly upon the addition of NaCl, resulting in the formation of less compact and tight polyplexes. The cytotoxic evaluation of the systems indicates that they are sparing with respect to the cell lines studied including osteosarcoma, osteoblast and human adipose-derived mesenchymal stem cells and exhibit good biocompatibility. Transfection experiments reveal that the non-quaternized polymer is effective at transferring DNA into cells, which is attributed to its high buffering capacity, facilitating the endo-lysosomal escape of the polyplex, the loose structure of the latter one and weakened polymer/DNA interactions, benefitting the DNA release.

Development of stimuli-responsive lyotropic liquid crystalline nanoparticles targeting lysosomes: Physicochemical, morphological and drug release studies

The abilities of sub-cellular targeting and stimuli-responsiveness are critical challenges in pharmaceutical nanotechnology. In the present study, glyceryl monooleate (GMO)-based non-lamellar lyotropic liquid crystalline nanoparticles were stabilized by the poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) block copolymer carrying tri-phenyl-phosphine cations (TPP-QPDMAEMA-b-PLMA), either used alone or in combination with other polymers as co-stabilizers. The systems were designed to perform simultaneously sub-cellular targeting, stimuli-responsiveness and to exhibit stealthiness. The physicochemical characteristics and fractal dimensions of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. The analyzed properties, including the responsiveness to pH and temperature, were found to be dependent on the combination of the polymeric stabilizers. The subcellular localization was monitored by confocal microscopy, revealing targeting to lysosomes. Subsequently, resveratrol was loaded into the nanosystems, the entrapment efficiency was investigated and in vitro release studies were carried out at different conditions, in which a stimuli-triggered drug release profile was achieved. In conclusion, the proposed multi-functional nanosystems can be considered as potentially stealth, stimuli-responsive drug delivery nanocarriers, with targeting ability to lysosomes and presenting a stimuli-triggered drug release profile.

Star Polymers as Non-Viral Carriers for Apoptosis Induction

Apoptosis is a widely controlled, programmed cell death, defects in which are the source of various diseases such as neurodegenerative diseases as well as cancer. The use of apoptosis in the therapy of various human diseases is of increasing interest, and the analysis of the factors involved in its regulation is valuable in designing specific carriers capable of targeting cell death. Highly efficient and precisely controlled delivery of genetic material by low-toxic carriers is one of the most important challenges of apoptosis-based gene therapy. In this work, we investigate the effect of the star polymer with 28 poly(N,N′-dimethylaminoethyl methacrylate) arms (STAR) on human cells, according to its concentration and structure. We show that star polymer cytotoxicity increases within its concentration and time of cells treatment. Except for cytotoxic effect, we observe morphological changes such as a shrinkage, loss of shape and begin to detach. We also prove DNA condensation after star polymer treatment, one of the most characteristic feature of apoptosis. The results indicate that the use of STAR triggers apoptosis in cancer cells compared to various normal cells, what makes these nanoparticles a promising drug in therapeutic strategy, which targets apoptosis. We demonstrate highlighting potential of star polymers as an innovative tool for anti-cancer therapy.

The Role of Polymer Structure in Formation of Various Nano- and Microstructural Materials: 30 Years of Research in the Laboratory of Nano- and Microstructural Materials at the Centre of Polymer and Carbon Materials PAS

The review summarizes the research carried out in the Laboratory of Nano- and Microstructural Materials at the Centre of Polymer and Carbon Materials, Polish Academy of Sciences (CMPW PAS). Studies carried out for many years under the guidance of Professor Andrzej Dworak led to the development and exploration of the mechanisms of oxirane and cyclic imine polymerization and controlled radical polymerization of methacrylate monomers. Based on that knowledge, within the last three decades, macromolecules with the desired composition, molar mass and topology were obtained and investigated. The ability to control the structure of the synthesized polymers turned out to be important, as it provided a way to tailor the physiochemical properties of the materials to their specific uses. Many linear polymers and copolymers as well as macromolecules with branched, star, dendritic and hyperbranched architectures were synthesized. Thanks to the applied controlled polymerization techniques, it was possible to obtain hydrophilic, hydrophobic, amphiphilic and stimulus-sensitive polymers. These tailor-made polymers with controlled properties were used for the construction of various types of materials, primarily on the micro- and nanoscales, with a wide range of possible applications, mainly in biomedicine. The diverse topology of polymers, and thus their properties, made it possible to obtain various types of polymeric nanostructures and use them as nanocarriers by encapsulation of biologically active substances. Additionally, polymer layers were obtained with features useful in medicine, particularly regenerative medicine and tissue engineering.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Star polymer-based nanolayers with immobilized complexes of polycationic stars and DNA for deposition gene delivery and recovery of intact transfected cells

We designed a novel thermoresponsive system of nanolayers composed of star poly[oligo(ethylene glycol) methacrylate]s (S-POEGMA) covalently bonded to a solid support and covered with polyplexes of cationic star polymers and plasmid DNA (pDNA). S-POEGMA stars were attached to the solid support via a UV-mediated "grafting to" method. To the best of our knowledge, for the first time, the conformational changes of obtained star nanolayers, occurring with changes in temperature, were studied using a quartz crystal microbalance technique. Next, the polyplexes of star poly[N,N'-dimethylaminoethyl methacrylate-ran-di(ethylene glycol) methacrylate] (S-P(DMAEMA-DEGMA)) with pDNA, exhibiting a phase transition temperature (T_CP) in culture medium DMEM, were deposited on S-POEGMA layers when the temperature increased above the T_CP of polyplex. The thermoresponsivity of the system was then the main mechanism for controlling the adhesion, proliferation, transfection and detachment of HT-1080 cells. The nanolayers promoted the effective cell culture and delivered nucleic acids into cells, with a transfection efficiency several times higher than that of the control. The detachment of the transfected cells was regulated only by the change of temperature. The studies demonstrated that we obtained a novel and effective system, based on a star polymer architecture, useful for gene delivery and tissue engineering applications.

Antimicrobial Activity of Hybrid Nanomaterials Based on Star and Linear Polymers of N,N'-Dimethylaminoethyl Methacrylate with In Situ Produced Silver Nanoparticles

Well-defined linear and multi-arm star polymer structures were used as the templates for in situ synthesis and stabilization of silver nanoparticles (AgNPs). This approach led to hybrid nanomaterials with high stability and antibacterial activity to both Gram-positive and Gram-negative bacterial strains. The ecologically friendly so called “green” synthesis of nanomaterials was performed through AgNPs preparation in the aqueous solutions of star and linear poly(N,N′-dimethylaminoethyl methacrylate)s (PDMAEMAs); the process was followed with time. The size, shape, and zeta potential of the obtained hybrids were determined. To our knowledge, this is the first time that the antibacterial activity of PDMAEMA hybrid nanomaterial against Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa was investigated and assessed by minimum inhibitory concentration (MIC) and minimum biocidal concentration (MBC). Completely quaternized with ethyl bromide, star and linear PDMAEMAs were used in comparative biological tests. The modification of the polymers with in situ-formed AgNPs increased the antibacterial properties against all studied strains of bacteria by several times in comparison to non-modified polymers and quaternized polymers. These results yield novel nanohybrid materials that can be useful for applications in medicine and biology.

Nanolayers of Poly(N,N'-Dimethylaminoethyl Methacrylate) with a Star Topology and Their Antibacterial Activity

In this paper, we focus on the synthesis and characterization of novel stable nanolayers made of star methacrylate polymers. The effect of nanolayer modification on its antibacterial properties was also studied. A covalent immobilization of star poly(N,N'-dimethylaminoethyl methacrylate) (PDMAEMA) to benzophenone functionalized glass or silicon supports was carried out via a "grafting to" approach using UV irradiation. To date, star polymer UV immobilization has never been used for this purpose. The thickness of the resulting nanolayers increased from 30 to 120 nm with the molar mass of the immobilized stars. The successful bonding of star PDMAEMA to the supports was confirmed by surface sensitive quantitative spectroscopic methods. Next, amino groups in the polymer layer were quaternized with bromoethane, and the influence of this modification on the antibacterial properties of the obtained materials was analyzed using a selected reference strain of bacteria. The resulting star nanolayer surfaces exhibited higher antimicrobial activity against Bacillus subtilis ATCC 6633 compared to that of the linear PDMAEMA analogues grafted onto a support. These promising results and the knowledge about the influence of the topology and modification of PDMAEMA layers on their properties may help in searching for new materials for antimicrobial applications in medicine.

Star polymers with acid-labile diacetal-based cores synthesized by aqueous RAFT polymerization for intracellular DNA delivery

Facile low temperature aqueous heterogeneous RAFT polymerization for preparation of novel star polymers with acid-labile diacetal-based cores for DNA delivery.

pH-Driven Morphological Diversity in Poly[n-Butyl Acrylate-block-(2-(Dimethylamino)Ethyl Acrylate)] Amphiphilic Copolymer Solutions

Amphiphilic poly[n-butyl acrylate-block-(2-(dimethylamino)ethyl acrylate)] (PnBA-b-PDMAEA) block copolymers are synthesized by the reversible addition fragmentation chain transfer polymerization process. The pH-responsive self-assembly behavior in aqueous media is studied by dynamic, static, and electrophoretic light scattering and cryogenic transmission electron microscopy (Cryo-TEM) at different pHs. In particular, the PnBA₄₀ -b-PDMAEA₆₀ copolymer (where subscripts denote %wt composition of the components) shows remarkable morphological transitions in aqueous solutions of varying pH values forming, among others, an unusual and novel hierarchical vesicular morphology, as indicated by Cryo-TEM results. The observed transitions are attributed to synergistic effects involving alterations of the protonation degree of the PDMAEA block, in conjunction with the specific composition of the copolymer and the softness of PnBA blocks, with cumulative drive changes in the packing parameter of the copolymer system and result in the formation of various unexpected morphologies by simple pH changes.

Stimuli-Responsive Lyotropic Liquid Crystalline Nanosystems with Incorporated Poly(2-Dimethylamino Ethyl Methacrylate)-b-Poly(Lauryl Methacrylate) Amphiphilic Block Copolymer

There is an emerging need to evolve the conventional lyotropic liquid crystalline nanoparticles to advanced stimuli-responsive, therapeutic nanosystems with upgraded functionality. Towards this effort, typically used stabilizers, such as Pluronics^®, can be combined or replaced by smart, stimuli-responsive block copolymers. The aim of this study is to incorporate the stimuli-responsive amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA) as a stabilizer in lipidic liquid crystalline nanoparticles, in order to provide steric stabilization and simultaneous stimuli-responsiveness. The physicochemical and morphological characteristics of the prepared nanosystems were investigated by light scattering techniques, cryogenic-transmission electron microscopy (cryo-TEM), X-ray diffraction (XRD) and fluorescence spectroscopy. The PDMAEMA-b-PLMA, either individually or combined with Poloxamer 407, exhibited different modes of stabilization depending on the lipid used. Due to the protonation ability of PDMAEMA blocks in acidic pH, the nanoparticles exhibited high positive charge, as well as pH-responsive charge conversion, which can be exploited towards pharmaceutical applications. The ionic strength, temperature and serum proteins influenced the physicochemical behavior of the nanoparticles, while the polymer concentration differentiated their morphology; their micropolarity and microfluidity were also evaluated. The proposed liquid crystalline nanosystems can be considered as novel and attractive pH-responsive drug and gene delivery nanocarriers due to their polycationic content.

Synthesis, Characterization and Cytotoxicity of Novel Thermoresponsive Star Copolymers of N,N'-Dimethylaminoethyl Methacrylate and Hydroxyl-Bearing Oligo(Ethylene Glycol) Methacrylate

Novel, nontoxic star copolymers of N,N-dimethylaminoethyl methacrylate (DMAEMA) and hydroxyl-bearing oligo(ethylene glycol) methacrylate (OEGMA-OH) were synthesized via atom transfer radical polymerization (ATRP) using hyperbranched poly(arylene oxindole) as the macroinitiator. Stars with molar masses from 100,000 g/mol to 257,000 g/mol and with various amounts of OEGMA-OH in the arms were prepared. As these polymers can find applications, e.g., as carriers of nucleic acids, drugs or antibacterial or antifouling agents, in this work, much attention has been devoted to exploring their solution behavior and their stimuli-responsive properties. The behavior of the stars was studied in aqueous solutions under various pH and temperature conditions, as well as in PBS buffer, in Dulbecco's modified Eagle's medium (DMEM) and in organic solvents for comparison. The results indicated that increasing the content of hydrophilic OEGMA-OH units in the arms up to 10 mol% increased the cloud point temperature. For the stars with an OEGMA-OH content of 10 mol%, the thermo- and pH-responsivity was switched off. Since cytotoxicity experiments have shown that the obtained stars are less toxic than homopolymer DMAEMA stars, the presented studies confirmed that the prepared polymers are great candidates for the design of various nanosystems for biomedical applications.

Stable star polymer nanolayers and their thermoresponsiveness as a tool for controlled culture and detachment of fibroblast sheets

Star polymer nanolayers were successfully used as surfaces for fibroblast adhesion and proliferation, followed by their detachment in the form of a cell sheet, controlled by a temperature decrease.

Temperature- and Composition-Dependent DNA Condensation by Thermosensitive Block Copolymers

Successful intracellular delivery of genes requires an efficient carrier, as genes by themselves cannot diffuse across cell membranes. Because of the toxicity and immunogenicity of viral vectors, nonviral vectors are gaining tremendous interest in research. In this work, we have investigated the temperature-dependent DNA condensation efficiency of various compositions of a thermosensitive block copolymer viz., poly(N-isopropylacrylamide)-b-poly(2-(diethylamino)ethyl methacrylate) (PNIPA-b-PDMAEMA). Three different copolymer compositions of varying molecular weights were successfully synthesized via the RAFT polymerization technique. Steady-state fluorescence and circular dichroism (CD) spectroscopies, dynamic light scattering (DLS) and zeta potential measurements, agarose gel electrophoresis, and atomic force microscopy techniques were utilized to study the interaction of the copolymers with DNA at temperatures above and below the critical aggregation temperature (CAT). All these experiments revealed that, above the CAT, there was formation of highly stable and tight polymer-DNA complexes (polyplexes). The size of polyplexes was dependent on the temperature up to a certain charge ratio, as determined by the DLS results. The results obtained from temperature-dependent fluorescence spectroscopy, CD, and gel electrophoresis indicated that the DNA molecules were shielded more from aqueous exposure above the CAT because of the formation of relatively more compact complexes. The polyplexes also exhibited changes in the particle morphology below and above the CAT, with particles generated above CAT being more spherical in morphology. These results suggested at the possibility of modulating the complex formation by temperature modification. The present biophysical studies would provide new physical insight into the design of novel gene carriers.

Gemini-Type Tetraphenylethylene Amphiphiles Containing [12]aneN3 and Long Hydrocarbon Chains as Nonviral Gene Vectors and Gene Delivery Monitors

Four gemini amphiphiles decorated with triazole-[12]aneN₃ as the hydrophilic moiety and various long hydrocarbons as hydrophobic moieties, 1-4, were designed to form micelles possessing the aggregation-induced emission (AIE) property for gene delivery and tracing. All four amphiphiles give ultralow critical micelle concentrations, are pH-/photostable and biocompatible, and completely retard the migration of plasmid DNAs at low concentrations. The DNA-binding abilities of the micelles were fully assessed. The coaggregated nanoparticles of 1-4 with DNAs could convert back into AIE micelles. In vitro transfections indicated that lipids 1 and 2 and their originated liposomes bearing decent delivering abilities have great potentials as nonviral vectors. Finally, on the basis of the transfection and the transitions between condensates and micelles, lipid 2 was singled out as the first example for real-time tracing of the intracellular deliveries of nonlabeled DNA, which provides spatiotemporal messages about the processes of condensate uptake and DNA release.

Stimuli-responsive HBPS-g-PDMAEMA and its application as nanocarrier in loading hydrophobic molecules

The topic of stimuli-responsive nanocarriers for loading guest molecules is dynamic. It has been widely studied in applications including drug controlled release, smart sensing, catalysis, and modeling. In this paper, a graft copolymer (hyperbranched polystyrene)-g-poly[2-(dimethylamino)ethyl methacrylate] (HBPS-g-PDMAEMA) was synthesized and characterized by (1)H NMR and GPC. It was observed that the star-like HBPS-g-PDMAEMA formed aggregates in aqueous solution. The influence of polymer concentration, ionic strength and pH value on the aggregates in aqueous solution was investigated by using UV-vis spectroscopy and DLS analysis. The results showed that size of aggregates was affected by a corresponding stimulus. In addition, the loading ability of HBPS-g-PDMAEMA aggregates was investigated by using pyrene or Nile red as the model guest molecules by using UV-vis and fluorescence spectroscopy. The results showed that HBPS-g-PDMAEMA aggregates were capable to encapsulate small hydrophobic molecules. These newly prepared HBPS-g-PDMAEMA nanocarriers might be used in, e.g., medicine or catalysis.

Targeted Gene Delivery to Macrophages by Biodegradable Star-Shaped Polymers

In this report, two biodegradable star-shaped polyasparamide derivatives and four analogues modified with either mannose or folic acid moiety for preferential targeting of a difficult-to-transfect immune cell type, i.e., macrophage, have been synthesized. Each of the prepared star polymers complexes with plasmid DNA to form nanosized particles featuring a core-shell-like morphology. Mannose or folate functionalized star polymers can greatly improve the transfection performance on a macrophage cell line RAW 264.7. As a result, a combination of targeting ligand modification and topological structures of gene carriers is a promising strategy for immune cells-based gene therapy.

Nonviral Plasmid DNA Carriers Based on N,N'-Dimethylaminoethyl Methacrylate and Di(ethylene glycol) Methyl Ether Methacrylate Star Copolymers

Star polymers with random and block copolymer arms made of cationic N,N'-dimethylaminoethyl methacrylate (DMAEMA) and nonionic di(ethylene glycol) methyl ether methacrylate (DEGMA) were synthesized via atom transfer radical polymerization (ATRP) and used for the delivery of plasmid DNA in gene therapy. All stars were able to form polyplexes with plasmid DNA. The structure and size of the polyplexes were precisely determined using light scattering and cryo-TEM microscopy. The hydrodynamic radius of a complex of DNA with star was dependent on the architecture of the star arms, the DEGMA content and the number of amino groups in the star compared to the number of phosphate groups of the nucleic acid (N/P ratio). The smallest polyplexes (Rh90°∼50 nm) with positive zeta potentials (∼15 mV) were formed of stars with N/P=6. The introduction of DEGMA into the star structure caused a decrease of polyplex cytotoxicity in comparison to DMAEMA homopolymer stars. The overall transfection efficiency using HT-1080 cells showed that the studied systems are prospective gene delivery agents. The most promising results were obtained for stars with random copolymer arms of high DEGMA content.

Flexible cyclic siloxane core enhances the transfection efficiency of polyethylenimine-based non-viral gene vectors

cD₄^H–AGE–PEI conjugates, with a favorable balance between hydrophilic and hydrophobic moieties, are promising carriers for gene delivery.

A thixotropic polyglycerol sebacate-based supramolecular hydrogel showing UCST behavior

Polyglycerol sebacate (PGS) is a relatively new biodegradable and elastomeric material that exhibits superior biocompatibility, a modulus that is comparable to human soft tissue, and linear biodegradation.