10.9-year survival of pressed acid etched monolithic e.max lithium disilicate glass-ceramic partial coverage restorations: Performance and outcomes as a function of tooth position, age, sex, and the type of partial coverage restoration (inlay or onlay)

Esthetic and Functional Posterior Rehabilitation With Lithium Disilicate Ceramics for the Replacement of Gold Alloy and Metal-Ceramic Restorations: A Clinical Case With a 10-Year Follow-Up

OBJECTIVE

This case report illustrates a clinical scenario of a patient with insufficient crowns, gold onlays and localized tooth pain in the posterior teeth, treated with partial and full coverage lithium disilicate restorations.

CLINICAL CONSIDERATIONS

A female patient presented in the clinics, complaining about tooth pain and unesthetic metal restorations. After a thorough examination, diagnosis and treatment plan, the existing restorations were removed, and a defect-oriented preparation was done to preserve as much as possible of the remaining tooth structure. Final partial and full coverage lithium disilicate restorations were delivered. After a 10-year follow-up no biological complications were observed. Nevertheless, one major chipping was observed in one of the upper molars. This technical complication was resolved with the fabrication of a new ceramic restoration.

CONCLUSION

Lithium disilicate ceramic posterior full- or partial-coverage restorations are a reliable and predictable treatment option not only for the replacement of tooth structure lost due to caries but also for the replacement of insufficient restorations.

CLINICAL SIGNIFICANCE

The following key factors are to be considered to pursue long-term success with ceramic restorations: patient selection, minimal invasive tooth preparation, appropriate material selection and cementation. Nevertheless, complications are to be expected, and the patient should be informed accordingly.

Multicenter Prospective Clinical Study on Chairside-Fabricated Partial Crowns: 5-Year Results for Lithia-Zirconia Glass-Ceramic Restorations

OBJECTIVES

Clinical evaluation of chairside-fabricated lithia-zirconia glass-ceramic (LZGC) partial crowns (CCPCs) in a multicenter practice-based study.

MATERIALS AND METHODS

Seventy-one patients were restored with 92 adhesively luted CCPCs (Cerec SW 4.2/Cerec MC XL/Celtra Duo) in three private dental clinics (C1-C3). Time-dependent (Kaplan-Meier) survival rates (SVR) and success rates (SCR) were calculated. The following possible covariates of SVRs and SCRs were evaluated in a Cox regression model: Restoration position (premolar/molar), luting material (Variolink/Calibra), and operator (C1-C3).

RESULTS

Seventy-three CCPCs were placed in 59 patients and were included in the study (mean observational period: 58.0 ± 15 months). Four complete failures (two tooth fractures, one restoration fracture, and one endodontic failure) were recorded. All failures and interventions occurred in one of the three centers (5-year SCR: C1 + C2: 100%; C3: 71%; 95% confidence interval: [0.55; 0.87]). Additionally, three biological, and two technical complications required clinical intervention to maintain function, and all occurred in C3. Restorations placed in C1 and C2 showed a significantly reduced risk for failure/intervention (hazard ratio = 0.103, p = 0.026) compared with restorations placed in C3.

CONCLUSIONS

LZGC CCPCs showed good five-year clinical performance. However, SVRs and SCRs were significantly influenced by the operator. Additional clinical data are required for a more detailed investigation of this effect.

Fracture resistance, marginal and internal adaptation of innovative 3D-printed graded structure crown using a 3D jet printing technology

PURPOSE

This in vitro study aimed to create a graded structured dental crown using 3D printing technology and investigate the fracture resistance and the adaptation of this new design.

MATERIALS AND METHODS

A dental crown with a uniform thickness of 1.5 mm was designed, and the exported stereolithography file (STL) was used to manufacture 30 crowns in three groups (n = 10), solid (SC), bilayer (BL), and multilayer (ML) crowns using  3D jet printing technology. Marginal and internal gaps were measured using the silicone replica technique. Crowns were then luted to a resin die using a temporary luting agent and the fracture resistance was measured using a universal testing machine. One-way ANOVA and Tukey post hoc tests were used to compare the fracture resistance and the adaptation of crowns at a significance level of 0.05.

RESULTS

Mean marginal and internal gap of the ML group were 80 and 82 mm, respectively; which were significantly (p < 0.05) smaller than BL (203 and 183 mm) and SC (318 and 221 mm) groups. The SC group showed the highest mean load at fracture (2330 N) which was significantly (p < 0.05) higher than the BL (1716 N) and ML (1516 N) groups.

CONCLUSION

3D jet printing technology provides an opportunity to manufacture crowns in a graded structure with various mechanical properties. This study provided an example of graded structured crowns and presented their fracture resistance. SC group had the highest fracture resistance; however, ML had the best marginal and internal adaptation.

Over 14-year survival of pressed e.max lithium disilicate glass-ceramic complete and partial coverage restorations in patients with severe wear: A prospective clinical study

STATEMENT OF PROBLEM

Long-term clinical data are lacking on the comparative survival of adhesively luted lithium disilicate glass-ceramic complete and partial coverage restorations in patients with severe wear and the effect that different clinical variables have on their survival.

PURPOSE

The purpose of this study was to examine the 14-year survival of pressed e.max lithium disilicate glass-ceramic complete and partial coverage restorations in patients with severe wear and to evaluate associated clinical parameters.

MATERIAL AND METHODS

Patients demonstrating severe wear and requiring single unit defect-specific partial or complete coverage restorations were recruited in a clinical private practice and received lithium disilicate restorations. The effect of various clinical parameters was evaluated using Kaplan-Meier survival curves to account for attrition bias and other causes of failure. The statistical significance of differences between parameters was determined by using the log rank test (α=.05).

RESULTS

A total of 53 participants (24 men and 29 women) requiring 662 lithium disilicate restorations were evaluated. The mean age of the participants at the time of restoration placement was 60 (range 25 to 85 years). Of 662 units, 551 were anterior and posterior complete and 111 were posterior partial coverage restorations. Six failures (bulk fracture or large chip) requiring replacement occurred with the average time to failure of 4.5 (range 2 to 8) years, yielding a crude estimate of annual failure of 0.1% (cumulative monitoring period of 4650 years, overall survival rate of 98.6%). Of the 551 complete coverage restorations, 4 failed (0 anterior, 4 posterior), yielding a crude estimate of 0.1% annual failure with the survival function time at 14 years. Of the 111 partial coverage restorations, 2 failed, yielding a crude estimate of 0.4% annual failure with the survival function time at 12 years. The only statistically significant difference was seen between anterior crowns and posterior onlays, with no failures in anterior crowns (P<.001). Other clinical variables had no significant effect on survival (P>.05).

CONCLUSIONS

Pressed e.max lithium disilicate partial and complete coverage restorations both showed high survival rates in patients with severe wear over 14 years with an overall yearly failure rate of 0.1%. Risk of failure at any age was minimal for both men and women. All anterior crowns survived. The highest annual failure rate (0.4%) was for posterior onlay partial coverage restorations.

Performance of Bonded Lithium Disilicate Partial-coverage Crowns in the Restoration of Endodontically Treated Posterior Teeth: An Up to Seven-Year Retrospective Study

OBJECTIVES

To evaluate the clinical performance of adhesively bonded lithium disilicate glass-ceramic (LDG) partial-coverage crowns in restoring posterior endodontically treated teeth (ETT).

METHODS AND MATERIALS

A total of 121 morphologically compromised posterior ETT were restored with LDG partial-coverage crowns between October 2015 and January 2018. The restorations were fabricated in the laboratory or at the chairside. Two adhesive systems and resin cements were used to cement the restorations. Tooth and restoration survival rates were calculated. The restorations were evaluated clinically using the modified United States Public Health Service (USPHS) criteria for an observation period of 5-7 years. The Cox proportional hazards model was used to estimate relative failure risks such as tooth type, resin cements, gender, and sleep bruxism. The standard chi-squared test was used to compare the survival of different tooth types for significant differences (α=0.05). In addition, survival probability was calculated using the Kaplan-Meier algorithm.

RESULTS

Among seven failed cases, one was a tooth fracture, and six were restoration fractures. According to the Kaplan-Meier analysis, the estimated survival rate of the teeth was 99% for seven years, while the estimated survival rate of the restorations was 94.8% for 5 years and 92.8% for 7 years. Tooth type and resin cements did not influence restoration survival rates (p>0.05), while sleep bruxism and male patients might increase the risk of failure (p<0.05).

CONCLUSIONS

The indirect adhesively bonded LDG partial-coverage crowns of posterior ETT exhibited favorable clinical outcomes. Ceramic fracture was the most common failure pattern.

Impact of different complete coverage onlay preparation designs and the intraoral scanner on the accuracy of digital scans

STATEMENT OF PROBLEM

The trueness and precision of intraoral scanners (IOSs) and the effect of intracoronal restorations have been reported. However, studies addressing the accuracy of IOSs in reproducing different complete coverage onlay preparation designs are lacking.

PURPOSE

The purpose of this in vitro study was to evaluate the influence of complete coverage onlay preparation design and intraoral scanning devices on the accuracy of digital scans in terms of trueness and precision.

MATERIAL AND METHODS

Three preparation designs on the mandibular first molar were considered: a traditional preparation design with isthmus reduction (IST), a traditional preparation design without isthmus reduction (wIST), and simplified nonretentive preparation (nRET). Digital scans of epoxy resin mandibular arch reference models of the preparations (containing second premolar, first molar, and second molar) were obtained by using 3 IOSs (iTero Element 2 [ELE], TRIOS 3 [TRI], and Primescan [PRI]) (n=10). Trueness (μm) and precision (μm) were analyzed by superimposing the digital scan on the digital reference models obtained with a high-accuracy industrial scanner (ATOS Core 80) in a tridimensional metrology software program. Accuracy was quantified by the absolute deviation (μm). Local and overall mean positive and negative deviations for trueness were also obtained. Data were analyzed by using the Kruskal-Wallis and Dunn tests with a statistical software program (α=.05).

RESULTS

The nonretentive preparation groups obtained higher trueness (3.8 μm) and precision (2.7 μm) than the IST and wIST groups (trueness=7.5 to 6.3 μm, precision=5.5 to 4.6 μm). Trueness values were lower with ELE×IST (16 μm), followed by ELE×wIST (13 μm), and PRI×IST (7.8 μm). In general, no difference was found between PRI and TRI scanners (6.3 to 5.9 μm), with lower performance for ELE (13 μm). Positive deviations were higher on the proximal box of the IST and wIST preparation and on the occlusal box of the IST group. Negative deviation was higher on the ELE×IST occlusal box.

CONCLUSIONS

Different intraoral scanners and preparation designs influenced the accuracy of digital scans. A more complex preparation such as IST and wIST showed higher deviation. The iTero Element 2 scanner exhibited higher deviation for both trueness and precision.

Long-term performance of ceramic in/-onlays vs. cast gold partial crowns - a retrospective clinical study

OBJECTIVES

To assess the long-term clinical performance of ceramic in-/onlays (CIOs) and cast gold partial crowns (CGPCs) in posterior teeth in terms of success, survival, complications (biological, technical) and quality.

MATERIAL AND METHODS

In a retrospective study, a total of 325 patients were recorded after up to 24.8 years (mean 13.9 ± 3.8 years) having (pre-)molars restored with CIO (Empress I, Ivoclar Vivadent, n = 161) and CGPC (Degunorm, DeguDent, n = 164) by supervised undergraduate students. A total of 296 restorations were assessed clinically and radiologically in healthy and endodontically treated teeth using modified United States Public Health Service (USPHS) criteria. Cumulative success and survival rates of the restorations were calculated using Kaplan-Meier estimates. Biological and technical complications were recorded. Status of oral health comprising caries risk and localized periodontitis were assessed.

RESULTS

The cumulative success rates of CIOs were 92.1% and of CGPCs 84.2% after mean service times of 14.5 years. The annual failure rates of total service times were 0.5% in teeth restored with CIO (n = 155) and 0.7% in teeth restored with CGPC (n = 163). The cumulative survival rates of CIOs were 93.9% after a mean service time of 15.2 years and decreased to 91.7% after 23.5 years. The cumulative survival rates of CGPCs were 92.6% after a mean service time of 14.9 years and 91.8% after 23.5 years. Complications in CIOs (n = 149) were ceramic fracture (6.7%), secondary caries (4.7%), endodontic complication (2.7%) and tooth fracture (1.3%) compared to CGPCs (n = 147) with endodontic complication (8.8%), secondary caries (4.8%) and decementation (2.0%). Endodontically treated teeth restored with CIO or CGPC revealed significantly less often success compared with corresponding vital teeth (p = .02). CIOs and CGPCs revealed clinically and radiographically good and excellent qualities with 71.8% (107/149) and 68% (100/147) without any significant differences regarding type of restoration.

CONCLUSIONS

Both CIOs and CGPCs achieved high survival rates up to 24.8 years when performed by supervised undergraduate students. The longevity of the restorations may benefit from the intraoral repair of accessible defects and, in case of pulp infection or necrosis, an adequate endodontic management.

CLINICAL RELEVANCE

CIOs and CGPCs made by supervised undergraduate students are proper restoration types in posterior teeth in the long-term. An adequate preparation design, meticulous care in the inserting technique and constant biofilm removal due to proper oral hygiene combined with professional maintenance care are substantial. The clinical long-term performance was mostly limited by ceramic fractures in CIOs and endodontic complications in CGPCs.

Partial glass-ceramic posterior restorations with margins beyond or above the cemento-enamel junction: An observational retrospective clinical study

PURPOSE

This observational retrospective clinical study aimed to investigate the survival and success rates of partial indirect lithium disilicate restorations with margins extending above or beyond the cementoenamel junction (CEJ).

METHODS

The study included patients who underwent partial indirect lithium disilicate restorations with immediate dentin sealing (IDS) between January 2008 and October 2018. All the restorations were placed in a single general dental practice following a standardized protocol. The impact of various predictive variables on the survival rates was assessed. Moreover, modified United States Public Health Service (USPHS) criteria were used to evaluate the survival quality.

RESULTS

Totally 1146 partial indirect lithium disilicate restorations in 260 patients were evaluated over an average period of 7.5 years. The cumulative survival and success rates were 97.3% and 95.3%, respectively. Margins extending beyond the cemento-enamel junction did not increase the risk of success or survival failure (P > 0.05). Patients with a high risk of caries, male sex, or non-vital teeth had a significantly higher risk of restoration failure (P < 0.05). Restorations with longer clinical service times exhibited marginally lower clinical quality (P < 0.001).

CONCLUSIONS

Partial indirect glass-ceramic restorations demonstrated survival and success rates of 97.3% and 95.3%, respectively, over an extended period. However, a higher risk of restoration failure existed in patients with a high caries risk for (pre)molars that had undergone endodontic treatment and in males. In terms of the risk of success or survival failure, comparable results were obtained for the positions of the restoration margin in relation to the cemento-enamel junction.

Effect of thermomechanical loading on fracture resistance and failure mode of new pressable zirconia-reinforced lithium disilicate onlay restoration

Background

Insufficient information exists regarding the fracture resistance and failure pattern of newly developed zirconia-reinforced lithium disilicate (ZL, Vita Ambria) onlays. This in vitro study compared the fracture resistance of two types of onlays: monolithic lithium disilicate (LD) and monolithic ZL.

Methods

Forty-eight ceramic onlay restorations were fabricated on epoxy dies using a maxillary first premolar model. The samples were divided into two main groups: LD and ZL. Half of each group was subjected to thermomechanical fatigue loading (TML) using a chewing simulator. All the samples were cemented with self-adhesive resin cement. Subsequently, they were loaded until failure in a universal testing machine, and the fracture patterns and resistance were recorded.

Results

Before TML, ZL demonstrated the highest statistically significant mean fracture resistance (499.76±34.14N) compared to LD (470.40±27.38N). After TML, ZL showed the highest non-statistically significant mean fracture resistance (429.27±131.42N), while LD's mean fracture resistance decreased (377.31±62.18N).

Conclusion

Monolithic zirconia-reinforced onlays demonstrated higher fracture resistance and a more favorable failure mode compared to LD. However, the impact of thermomechanical aging resulted in reduced fracture resistance for both materials, with a notable preference observed for ZL.

Ultrathin lithium disilicate and translucent zirconia crowns for posterior teeth: Survival and failure modes

PURPOSE

To evaluate the reliability and failure modes of ultrathin (0.5 mm) lithium disilicate, translucent and ultra-translucent zirconia crowns for posterior teeth restorations.

MATERIALS AND METHODS

Fifty-four mandibular first molar crowns of three ceramic materials: (1) Lithium disilicate (e.max CAD, Ivoclar Vivadent), (2) 3Y-TZP (Zirconn Translucent, Vipi), and (3) 5Y-PSZ (Cercon XT, Dentsply Sirona), with 0.5 mm of thickness were milled and cemented onto composite resin abutments. Eighteen samples of each group were tested under mouth-motion step-stress accelerated life testing in a humid environment using mild, moderate, and aggressive profiles. Data was subjected to Weibull statistics. Use level curves were plotted and reliability was calculated for a given mission of 100,000 cycles at 100, 200, and 300 N. Fractographic analyses of representative samples were performed in scanning electron microscope.

RESULTS

Beta (β) values suggest that failures were dictated by material's strength for lithium disilicate and by fatigue damage accumulation for both zirconias. No significant differences were detected in Weibull modulus and characteristic strength among groups. At a given mission of 100,000 cycles at 100 N, lithium disilicate presented higher reliability (98% CB: 95-99) regarding 3Y-TZP and 5Y-PSZ groups (84% CB: 65%-93% and 79% CB: 37&-94%, respectively). At 200 N, lithium disilicate reliability (82% CB: 66%-91%) was higher than 5Y-PSZ (20% CB: 4%-44%) and not significantly different from 3Y-TZP (54% CB: 32%-72%). Furthermore, at 300 N no significant differences in reliability were detected among groups, with a notable reduction in the reliability of all materials. Fractographic analyses showed that crack initiated at the interface between the composite core and the ceramic crowns due to tensile stress generated at the intaglio surface.

CONCLUSIONS

Ultrathin lithium disilicate crowns demonstrated higher reliability relative to zirconia crowns at functional loads. Lithium disilicate and zirconia crown's reliability decreased significantly for missions at higher loads and similar failure modes were observed regardless of crown material. The indication of 0.5 mm thickness crowns in high-load bearing regions must be carefully evaluated.

CLINICAL SIGNIFICANCE

Ultraconservative lithium disilicate and zirconia crowns of 0.5 mm thickness may be indicated in anterior restorations and pre-molars. Their clinical indication in high-load requirement regions must be carefully evaluated.

Finishing technique effect on strength of zirconia-reinforced lithium silicate ceramic

The aim of this study was to evaluate the effect of two finishing techniques, glazing or polishing, in comparison with the as-cut condition, on the biaxial-flexural-strength (BFS) of a zirconia-reinforced lithium silicate ceramic (ZLS). Cylinders were milled from CAD/CAM blocks and sliced to obtain disc-shaped specimens (ISO6872:2015). Polished and glazed specimens were processed following the manufacturer's instructions. Thirty-three specimens were obtained for each condition and microstructural and BFS/fractographic characterizations were performed. BFS and roughness data were analyzed using Weibull statistics and ANOVA one-way with Tukey post-hoc test, respectively. While a rougher surface was observed for as-cut specimens, smoother surfaces were observed for polished and glazed ZLS at microscopical evaluation and confirmed through surface-roughness evaluation. X-ray spectra depicted a glass phase for all groups and characteristic metasilicate, lithium disilicate, and lithium phosphate peaks for the as-cut and polished specimens. Glazed specimens showed higher characteristic strength than polished and as-cut specimens, which did not differ significantly. While higher Weibull-modulus was observed for the polished than for the as-cut specimens, no statistically significant differences were noted between glazed and polished, and between glazed and as-cut specimens. ZLS presents higher strength when glazed, and polishing increases the structural reliability of the material relative to the as-cut condition. Both finishing techniques reduced surface roughness similarly.

Hydrofluoric acid concentration and etching time affect differently the microstructure and surface properties of pressed lithium disilicate glass ceramics

OBJECTIVE

To evaluate the effect of different hydrofluoric acid concentrations and etching times on the surface, chemical composition and microstructure of lithium disilicate.

MATERIAL AND METHODS

Ninety specimens of pressed lithium disilicate (LDS) were obtained (IPS e.max Press, Rosetta SP and LiSi Press). The specimens of each material were divided in two groups according to the hydrofluoric acid concentration: 5% and 10% (n = 15/group), and subdivided according to the etching time: 20, 40 and 60 s (n = 5/group). Crystalline evaluations and chemical composition were performed through x-ray diffraction (XRD) and energy-dispersive x-ray spectroscopy (EDS), respectively. Microstructural analyses were performed by scanning electron microscope (SEM), surface roughness (Ra), and material thickness removal evaluation. Thickness removal and Ra data were analyzed by ANOVA and Tukey test (p < 0.05).

RESULTS

XRD demonstrated characteristic peaks of lithium disilicate crystals, lithium phosphate and of a vitreous phase for all materials. EDS identified different compositions and SEM confirmed different surface responses to acid etching protocols. Material and etching time influenced Ra and material thickness removal (p < 0.05).

CONCLUSION

Hydrofluoric acid concentration and etching time affect the surface characteristics of LDS differently. LiSi Press presented higher resistance to hydrofluoric acid etching compared to e.max Press and Rosetta SP.

CLINICAL SIGNIFICANCE

Applying the appropriate etching protocol is pivotal to avoid excessive material removal and to prevent jeopardize the mechanical and optical properties of the material.

A Narrative Review on Polycrystalline Ceramics for Dental Applications and Proposed Update of a Classification System

Dental zirconias have been broadly utilized in dentistry due to their high mechanical properties and biocompatibility. Although initially introduced in dentistry as an infrastructure material, the high rate of technical complications related to veneered porcelain has led to significant efforts to improve the optical properties of dental zirconias, allowing for its monolithic indication. Modifications in the composition, processing methods/parameters, and the increase in the yttrium content and cubic phase have been presented as viable options to improve zirconias' translucency. However, concerns regarding the hydrothermal stability of partially stabilized zirconia and the trade-off observed between optical and mechanical properties resulting from the increased cubic content remain issues of concern. While the significant developments in polycrystalline ceramics have led to a wide diversity of zirconia materials with different compositions, properties, and clinical indications, the implementation of strong, esthetic, and sufficiently stable materials for long-span fixed dental prostheses has not been completely achieved. Alternatives, including advanced polycrystalline composites, functionally graded structures, and nanosized zirconia, have been proposed as promising pathways to obtain high-strength, hydrothermally stable biomaterials. Considering the evolution of zirconia ceramics in dentistry, this manuscript aims to present a critical perspective as well as an update to previous classifications of dental restorative ceramics, focusing on polycrystalline ceramics, their properties, indications, and performance.

Clinical evaluation of lithium disilicate versus indirect resin composite partial posterior restorations - A 7.8-year retrospective study

OBJECTIVE

To evaluate retrospectively the longevity of lithium disilicate ceramic (LidiSi) vs. laboratory-processed resin-based composite (RBC) inlay/onlay/overlay restorations and risk factors associated with restoration deficiencies and failures.

METHODS

Patients (n = 91) receiving LidiSi (73.1%) and RBC (36.9%) inlays/onlays/overlays between 2007 and 2017 were selected. The restorations were evaluated using the modified U.S. Public Health Service criteria. The survival of the restorations was analyzed using the Kaplan-Meier method and log rank test. Factors affecting the occurrence of deficiencies were examined by logistic regression analysis. This was performed with the use of the Generalized Estimating Equation model including Repeated measurements (GEER), with the consideration that the same patient had several teeth in the sample. Risk estimation was conducted for each evaluated criterion (p < 0.05).

RESULTS

The survival of LidiSi and RBC restorations were 96.8% and 84.9%, respectively after a mean observation period of 7.8 ± 3.3 years. The annual failure rate was 0.2% for LidiSi and 1.0% for RBC. The probability of survival was above 98% for both restorations in the first 6 years, however, it dropped to 60% for RBC by the end of the 15th year. For both materials the reasons for failure included secondary caries, restoration fracture, and endodontic complication. In addition, LidiSi also failed due to tooth fracture, while RBC due to marginal gap formation and loss of retention. Among the evaluated risk factors, material of restoration (OR=6.8, CI95%:3.1-14.9), oral hygiene (OR=8.0, CI95%: 2.9-22.1], and bruxism (OR=1.9, CI95%: 1.1-3.3) showed a significant impact on the evaluated criteria.

SIGNIFICANCE

LidiSi and RBC restorations showed similarly excellent 6-year survival, however, in the long term significantly more failures should be expected for RBCs.

Retrospective clinical study on the performance and aesthetic outcome of pressed lithium disilicate restorations in posterior teeth up to 8.3 years

OBJECTIVES

Evaluation of cumulative survival and complication rate of monolithic lithium disilicate inlays and partial crowns performed by supervised undergraduate students up to 8.3 years of clinical service.

MATERIALS AND METHODS

In this retrospective clinical study 143 lithium disilicate posterior restorations (IPS e.max Press) were examined according to the FDI criteria. A standardised questionnaire was used to determine patient satisfaction. The aesthetic outcome was evaluated by dentists and dental technicians using intraoral photographs. Data were descriptively analysed. Cumulative survival and success rates were calculated using Kaplan-Meier estimation.

RESULTS

The cumulative survival rate of lithium disilicate restorations was 97.5% after a mean service time of 5.9 years and 95.0% after 8.3 years. The cumulative success rate decreased from 94.4% after 5.9 years to 30.7% after 8.3 years. Repairs were required for 7 restorations (4.9%), and 5 (3.5%) were classified as failures. The results of the questionnaire indicate a high level of patient satisfaction. The subjective aesthetics were assessed more critically by dental technicians compared to dentists.

CONCLUSION

Lithium disilicate posterior restorations survived successfully up to 8.3 years when carried out by undergraduate students.

CLINICAL RELEVANCE

Pressed lithium disilicate glass ceramic inlays and partial crowns are reliable treatment options in posterior teeth.

Does glaze firing affect the strength of advanced lithium disilicate after simulated defects?

OBJECTIVE

To study the influence of glazing on strength repair of lithium disilicate glass-ceramics after defect incorporation in different production processing phases.

MATERIALS AND METHODS

Bar-shaped specimens (1 × 1 × 12 mm, n = 280; 20/group) made from different lithium disilicate ceramics (IPS e.max CAD, Ivoclar, "LD" or advanced lithium disilicate CEREC Tessera, Dentsply Sirona, "ALD") were exposed to 7 different protocols: crystallized without (c) and with glaze layer (cg), with a defect incorporated before crystallization without (ic) and with glaze layer (icg), with a defect after crystallization without (ci) or with glaze layer (cig), and defect incorporated after the glaze layer (cgi). The flexural strength was determined using the three-point bending test. Analysis of indented areas and fractured specimens was performed by scanning electron microscopy. Flexural strength data were evaluated by two-way ANOVA followed by Tukey tests (α = 5%).

RESULTS

Two-way ANOVA revealed a significant influence of ceramic (p < 0.001; F = 55.45), protocol (p < 0.001; F = 56.94), and the interaction protocol*ceramic (p < 0.001; F = 13.86). Regardless of ceramics, defect incorporation as final step resulted in the worst strength, while defects introduced before crystallization did not reduce strength. Glaze firing after defect incorporation led to strength repair for ALD, whereas such an effect was not evident for LD.

CONCLUSIONS

The advanced lithium disilicate must receive a glaze layer to achieve its highest strength. Defects incorporated in the pre-crystallized stage can be healed during crystallization. Defects should not be incorporated after glazing.

CLINICAL RELEVANCE

Clinical adjustments should be performed on pre-crystallized or crystalized restorations that receive a glazer layer afterwards.

Effects of Hydrofluoric Acid Concentrations, Commercial Brands, and Adhesive Application on the Bond Strength of a Resin Luting Agent to Lithium Disilicate Glass Ceramic

OBJECTIVES

To evaluate the surface topography/roughness and bond strength of a resin luting agent to a lithium disilicate glass ceramic after etching with different concentrations of hydrofluoric acid (HF) and commercial brands.

METHODS

For bond strength evaluation, 260 lithium disilicate glass ceramic (EMX) discs were randomly distributed into 13 groups based on concentrations of HF and commercial brands (n=20): 5% and 10%, Lysanda (LY5 and LY10); 5% and 10%, Maquira (MA5 and MA10); 5% and 10%, FGM (FG5 and FG10); 4.8%, Ivoclar Vivadent (IV5); 5% and 10%, PHS do Brasil (PH5 and PH10); 5% and 10%, BM4 (BM5 and BM10); 9%, Ultradent Inc (UL10); and Dentsply (DE10). A further random distribution (n=10) was made based on the application (+) or absence (-) of an adhesive layer. Resin luting agent cylinders (1 mm in diameter) were added on EMX surfaces, light-cured, and stored for 24 hours in deionized water at 37°C. On a universal testing machine (DL 500, EMIC), specimens were submitted to a microshear bond strength test at a crosshead speed of 1 mm/min until failure. A representative etched EMX disc from each group underwent surface topography analysis using field-emission scanning electron microscopy (n=1), and five (n=5) etched EMX discs from each group were tested for surface roughness. Data were statistically analyzed using analysis of variance and Tukey test (α=0.05).

RESULTS

A less conditioned and smoother surface was observed for 5% HF compared to 10%. Additionally, commercial brands of HF were shown to affect bond strength. When the adhesive layer was not used (-), a 10% concentration promoted higher bond strengths to EMX. However, when adhesive was applied (+), the concentrations of HF and commercial brands had no effect on bond strength results.

CONCLUSIONS

A 10% concentration of HF results in higher bond strength than a 5% concentration. If an adhesive layer is applied, neither this distinction nor the influence of commercial brands is observed.

Survival Rates of Glass versus Hybrid Ceramics in Partial Prosthetic Restorations: A Scoping Review with Emphasis on Adhesive Protocols

As dental practices and methodologies evolve, the emergence of novel materials adds complexity to clinical choices. While glass ceramics, particularly those based on lithium disilicate and leucite-reinforced variants, have been extensively researched and are well regarded for their attributes, hybrid ceramics remain relatively recent area of research that is less investigated. This review aims to evaluate the durability of glass and hybrid ceramics while assessing the role of various adhesive techniques on restoration longevity. Using a comprehensive search of PubMed and EMBASE, 84 articles from the past decade were found. Only eleven met the set criteria for analysis. The results underscore the urgent need for the extended monitoring of partial prosthetic restorations. The existing literature has significant gaps, hindering the attainment of dependable insights about these materials' long-term performance. For a clearer understanding of how different ceramic systems affect restoration survival rates, rigorous research involving more participants and uniform outcome documentation is vital.

Effect of preparation design on fracture strength of compromised molars restored with lithium disilicate inlay and overlay restorations: An in vitro and in silico study

PURPOSE

The objective of this study was to determine the influence of different preparation designs on the fracture strength, failure type, repairability, formation of polymerization-induced cracks, and tooth deformation of structurally compromised molars restored with lithium disilicate inlays and overlays in combination with Immediate Dentin Sealing (IDS).

MATERIAL AND METHODS

Human molars (N = 64) were randomly assigned to four different preparation designs: Undermined Inlay (UI), Extended Inlay (EI), Restricted Overlay (RO), and Extended Overlay (EO). The teeth were restored using lithium disilicate partial restorations and subjected to thermomechanical fatigue in a chewing simulator (1,2 × 10 (Mondelli et al., 2007) cycles on 50 N, 8000x 5-55 °C), followed by load to failure testing. In silico finite element analysis was conducted to assess tooth deformation. Polymerization-induced cracks were evaluated using optical microscopy and transillumination. Fracture strengths were statistically analyzed using a Kruskal-Wallis test, while the failure mode, repairability, and polymerization cracks were analyzed using Fisher exact test.

RESULTS

The propagation of polymerization-induced cracks did not significantly differ among preparation designs. All specimens withstood chewing simulator fatigue, with no visible cracks in teeth or restorations. Fracture strength was significantly influenced by preparation design, with restricted overlay (RO) showing higher fracture strength compared to extended inlay (EI) (p = .042). Tooth deformation and fracture resistance correlated between in vitro and in silico analyses). UI exhibited a statistically less destructive failure pattern than EO (p < .01) and RO (p = .036). No statistically significant influence of the preparation design on repairability was observed. Groups with higher repairability rates experienced increased tooth deformation, leading to less catastrophic failures.

CONCLUSIONS

The preparation design affected the fracture strength of compromised molars restored with lithium disilicate inlays and overlays, with significantly lower fracture strength for an extended inlay. The failure pattern of lithium disilicate overlays is significantly more destructive than that of undermined and extended inlays. The finite element analysis showed more tooth deformation in the inlay restorations, with lower forces in the roots, leading to less destructive fractures. Since cusp coverage restorations fracture in a more destructive manner, this study suggests the undermined inlay preparation design as a viable option for restoring weakened cusps.

A Critical Review of Dental Lithia-Based Glass-Ceramics

The purpose of this article is to review current understanding of lithia-based glass-ceramics and to identify future research needs for this class of dental materials in relation to novel compositions and fabrication methods. With rapid advances in material development and digital technology, time efficiency of dental workflow and fit accuracy of ceramic restorations are ever improving. Lithia-based glass-ceramics are at the forefront of this advance-new variants with more efficient fabrication routes are continually being introduced into the marketplace. Base glass composition, crystallization heat treatment, nucleant and coloration additives, and property gradation are some pertinent variables. The trend in fabrication is to move from CAD/CAM grinding of partially crystallized glass-ceramics to fully crystallized materials, thereby circumventing the need for postmachining firing altogether. In these endeavors, a better understanding of mechanical properties and evolving shaping technologies, such as ductile grinding, is paramount. Additive manufacturing and 3-dimensional printing methodologies offer a promising alternative to current CAD/CAM subtractive manufacturing routes. Challenges to the implementation of new technologies in efficient development and production of high-quality dental glass-ceramic prostheses are addressed.

An engineering perspective of ceramics applied in dental reconstructions

The demands for dental materials continue to grow, driven by the desire to reach a better performance than currently achieved by the available materials. In the dental restorative ceramic field, the structures evolved from the metal-ceramic systems to highly translucent multilayered zirconia, aiming not only for tailored mechanical properties but also for the aesthetics to mimic natural teeth. Ceramics are widely used in prosthetic dentistry due to their attractive clinical properties, including high strength, biocompatibility, chemical stability, and a good combination of optical properties. Metal-ceramics type has always been the golden standard of dental reconstruction. However, this system lacks aesthetic aspects. For this reason, efforts are made to develop materials that met both the mechanical features necessary for the safe performance of the restoration as well as the aesthetic aspects, aiming for a beautiful smile. In this field, glass and high-strength core ceramics have been highly investigated for applications in dental restoration due to their excellent combination of mechanical properties and translucency. However, since these are recent materials when compared with the metal-ceramic system, many studies are still required to guarantee the quality and longevity of these systems. Therefore, a background on available dental materials properties is a starting point to provoke a discussion on the development of potential alternatives to rehabilitate lost hard and soft tissue structures with ceramic-based tooth and implant-supported reconstructions. This review aims to bring the most recent materials research of the two major categories of ceramic restorations: ceramic-metal system and all-ceramic restorations. The practical aspects are herein presented regarding the evolution and development of materials, technologies applications, strength, color, and aesthetics. A trend was observed to use high-strength core ceramics type due to their ability to be manufactured by CAD/CAM technology. In addition, the impacts of COVID-19 on the market of dental restorative ceramics are presented.

Weak adhesion between ceramic and resin cement impairs the load-bearing capacity under fatigue of lithium disilicate glass-ceramic crowns

OBJECTIVE

To evaluate the fatigue behavior of lithium disilicate crowns with a simplified anatomy against progressive cement/ceramic debonding scenarios.

MATERIALS AND METHODS

Lithium disilicate crowns were fabricated via CAD/CAM and luted onto a dentin analogue material using resin cement following the manufacturer's instructions. Then, the different crown regions were isolated with paraffin oil for the absence of chemical adhesion according to four experimental groups (n = 15): Shoulder; Shoulder + Axial; Fully isolated; and Control (no insulation/fully bonded). Load to failure tests (n = 3) were run to determine cyclic fatigue parameters, and the specimens were subsequently submitted to a cyclic fatigue test (n = 12) (initial load 200 N for 5000 cycles, step 100 N, 15,000 cycles/step, frequency 20 Hz) until cracks were observed, and later fracture. The data were analyzed by Kaplan-Meier + Mantel-Cox post-hoc tests for both outcomes (cracks and fracture). Fractographic, cross-sectional surface, and finite element (FEA) analyzes were performed.

RESULTS

When it comes to crack occurrence when the chemical adhesion to the occlusal surface is compromised, there is worsening (p < 0.05) in fatigue behavior compared to groups where the occlusal portion of the crown is still bonded. Considering fracture occurrence, there was no difference (p > 0.05) among the tested groups. All cracks occurred in the occlusal portion, first as a radial crack at the ceramic intaglio surface, and posteriorly unleashing a Hertzian cone crack at the top surface, resulting in fractures on the frontal walls. The interface analysis showed no interference of the insulating agent. FEA showed that as the isolated areas increased, there was also an increase in both tensile and shear stresses concentration in the crown and in the cement layer.

CONCLUSION

The chemical adhesion between cement and ceramic is essential for better fatigue behavior of lithium disilicate crowns with a simplified anatomy, especially in the occlusal portion, but the restoration performance is impaired when such adhesion is compromised. There is an increase in crown and cement stress concentration with the progressive loss of chemical bonding of the crown's walls.

Incidence of endodontic therapy after complete or partial coverage glass-ceramic restorations with a follow-up time of over 30 years: A prospective clinical study

STATEMENT OF PROBLEM

Long-term clinical data are lacking on the comparison of the incidence of endodontic therapy in adhesively luted complete and partial coverage glass-ceramic restorations, as well as on the effect of technique and clinical variables.

PURPOSE

The purpose of this prospective clinical study was to assess the long-term incidence of teeth requiring endodontic therapy after receiving either complete or partial coverage glass-ceramic restorations.

MATERIAL AND METHODS

Participants requiring single anterior complete, posterior complete, or posterior partial (inlay or onlay) coverage restoration, or a combination of these on a vital tooth were recruited from a clinical private practice. Only the participants who chose glass-ceramic partial and complete coverage restorations without the need of endodontic therapy were included in the study. The overall clinical performance of these glass-ceramic restorations was assessed by clinical factors determined at recall. The effect of various clinical parameters (type of restoration, dental arch, tooth position in the dental arch, age and sex of participant, and ceramic thickness) was evaluated by using Kaplan-Meier survival curves to account for attrition bias and other reasons for failure. The statistical significance of differences between parameters was determined by using the log rank test (α=.05).

RESULTS

A total of 1800 participants requiring 4511 glass-ceramic anterior and posterior restorations were evaluated. The mean age of the participants at the time of restoration placement was 62 (range 20 to 99 years, 710 men and 1090 women). Of 4511 restorations, 1476 were anterior complete coverage, 2119 posterior complete coverage, and 916 posterior partial coverage. Endodontic therapy after restoration placement was needed for 76 restorations (10 anterior complete, 50 posterior complete, and 16 posterior partial). The total time at risk was 50 436 years providing an estimated need for endodontic therapy risk of 0.15% per year. The estimated 35-year cumulative survival was 97.36%. The majority of endodontic treatments (67%, 52/76) occurred in the first 5 years. The estimated cumulative survival of anterior complete coverage, posterior complete coverage, posterior partial inlay, and posterior partial onlay restorations was 98.89% (n=1476, 10 endodontic treatments), 96.38% (n=2119, 50 endodontic treatments), 96.78% (n=553, 11 endodontic treatments), and 98.53% (n=363, 5 endodontic treatments), respectively. Statistically significant differences occurred between anterior complete coverage, posterior complete coverage, and posterior partial coverage inlay restorations, with a higher incidence in posterior complete coverage and posterior partial inlay restorations (P<.05). First molars had the highest rate of endodontic therapy after restoration in both arches. Age and restoration thickness were significant factors, recording statistically higher number of endodontic treatments in participants >52 years and restorations with all surfaces ≥1 mm (P<.05). Other clinical variables, dental arch and sex of the participants, were not significantly related to endodontic treatments (P>.05).

CONCLUSIONS

The clinical performance of 4511 units over 30 years in service was excellent, with the estimated cumulative survival of 97.36%. Posterior complete coverage and posterior partial inlay restorations had a significantly higher need for endodontic therapy than anterior complete coverage restorations. Their overall clinical performance relative to endodontic treatment was excellent with a cumulative survival of 96.38% and 96.78% over 30 years. There was no difference in the endodontic treatment rate between posterior complete and partial coverage restorations. Thickness of the restoration affected the endodontic treatment rate, with ≥1 mm resulting in higher incidence. The age of the participants influenced the endodontic treatment rate, with higher incidence in the >52-year age group. Other confounding clinical variables did not have a significant effect on the endodontic treatment rate.

Onlays/partial crowns versus full crowns in restoring posterior teeth: a systematic review and meta-analysis

BACKGROUND

Tooth-colored onlays and partial crowns for posterior teeth have been used increasingly in clinics. However, whether onlays/partial crowns could perform as well as full crowns in the posterior region was still not evaluated thoroughly.

METHODS

A literature search was conducted without language restrictions in Pubmed, Embase, Cochrane Central Register of Controlled Trial and Web of science until September 2021. RCTs, prospective and retrospective observational studies with a mean follow-up of 1 year were selected. Cochrane Collaboration's tool was adopted for quality assessment of the RCT. The quality of observational studies was evaluated following Newcastle-Ottawa scale. The random-effects and fixed-effects model were employed for meta-analysis.

RESULTS

Four thousand two hundred fifty-seven articles were initially searched. Finally, one RCT was identified for quality assessment and five observational studies for qualitative synthesis and meta-analysis. The RCT was of unclear risk of bias while five observational studies were evaluated as low risk. The meta-analysis indicated no statistically significant difference in the survival between onlays/partial crowns and full crowns after 1 year (OR = 0.55, 95% CI: 0.02-18.08; I² = 57.0%; P = 0.127) and 3 years (OR = 0.65, 95% CI: 0.20-2.17; I² = 0.0%; P = 0.747). For the success, onlays/partial crowns performed as well as crowns (OR = 0.58, 95% CI: 0.20-1.72; I² = 0.0%; P = 0.881) at 3 years. No significant difference of crown fracture existed between the two methods (RD = 0.00, 95% CI: - 0.03-0.03; I² = 0.0%; P = 0.972).

CONCLUSIONS

Tooth-colored onlays/partial crowns performed as excellently as full crowns in posterior region in a short-term period. The conclusions should be further consolidated by RCTs with long-term follow-up.

Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry

The Scientific Investigation Committee of the American Academy of Restorative Dentistry offers this review of the 2021 dental literature in restorative dentistry to inform busy dentists regarding noteworthy scientific and clinical progress over the past year. Each member of the committee brings discipline-specific expertise to coverage of this broad topical area. Specific subject areas addressed, in order of the appearance in this report, include COVID-19 and the dental profession (new); prosthodontics; periodontics, alveolar bone, and peri-implant tissues; implant dentistry; dental materials and therapeutics; occlusion and temporomandibular disorders; sleep-related breathing disorders; oral medicine and oral and maxillofacial surgery; and dental caries and cariology. The authors focused their efforts on reporting information likely to influence daily dental treatment decisions with an emphasis on future trends in dentistry. With the tremendous volume of dentistry and related literature being published daily, this review cannot possibly be comprehensive. Rather, its purpose is to update interested readers and provide important resource material for those interested in pursuing greater details on their own. It remains our intent to assist colleagues in negotiating the extensive volume of important information being published annually. It is our hope that readers find this work useful in successfully managing the patients and dental problems they encounter.

Longevity of gold restorations in posterior teeth: A retrospective study up to 10-years

OBJECTIVE

In this retrospective clinical study, we investigated the long-term survival and success of indirect gold restorations, placed by undergraduate students.

MATERIAL AND METHODS

The study included 72 gold restorations in 45 patients, placed in a five-year period between 2009 and 2013. Two experienced dentists performed the evaluation following the FDI criteria after 5 to 10 years. Kaplan-Meier test was used for longevity analysis of success and survival. Data were tested for normality with Shapiro-Wilk test. Cox regression analysis, with significance level appointed at p ≤ .05, was performed using success and survival of restorations as dependent variables. Annual failure rates (AFRs) were calculated.

RESULTS

Overall, 72 indirect gold restorations prepared in posterior teeth were assessed, with an observation time from 63 months to 117 months. The mean service time was 88.1 months and the median 87 months. No failures, but 2 repairs, were observed during the first five years. From 5 to 10 years 1 replacement and 1 more repair occurred. The survival and success rates of gold restorations were calculated at 9 years with 98.6% and 91%, respectively. Restorations placed on premolars had higher survival and success rates compared to molars. Three cases were categorized as repairs: in two cases, a root canal treatment was needed and, in one other, an occlusal perforation of the restoration was observed.

CONCLUSIONS

Posterior indirect gold restorations placed by dental undergraduate students showed a highly predictable clinical performance in terms of success and survival. These results are comparable with survival rates reported in literature for restorations cemented in general dental practices.

CLINICAL SIGNIFICANCE

Casted gold restorations placed from dental students in an undergraduate setting show high survival rates, similar to professional dentists.

Survival of direct resin composite onlays and indirect tooth-coloured adhesive onlays in posterior teeth: a systematic review

Objective To compare the survival of direct resin-composite used as onlays and indirect tooth-coloured adhesive onlays in posterior teeth, along with modes of failure, deterioration and variables affecting survival.Materials and methods PubMed, Embase, The Cochrane Library, Web of Science and Scopus were searched systematically up to 16 October 2020. In total, 3,768 studies were screened, with their results for survival, failure mode, deterioration and variables affecting survival.Results In total, 30 studies were selected. Survival rates in included studies greater than three years in length were 73.1-100%, with a median survival of 92.5% and median follow-up length of 5.1 years. The most prevalent failure mode was fracture, followed by pulpal episodes, debonding and caries. The most prevalent deterioration criteria were loss of marginal integrity and discolouration.Conclusions Survival of direct resin composite onlays and indirect tooth-coloured adhesive onlays in posterior teeth is acceptable (73.1-100%) in the medium-term. There is a need for more studies on direct cusp covering resin composite restorations, zirconia onlays and studies comparing material types. Fracture was the most prevalent failure mode. Restoration margins were the most prevalent area of deterioration.Clinical significance Direct and indirect tooth-coloured adhesive onlays can be a reliable and more conservative way to restore posterior teeth across a range of material options.

The perception of smile attractiveness to altered vertical position of maxillary anteriors by various groups

There is a gap in research about the differences in smile attractiveness. The problem the study addresses is how the vertical canine and incisor position affect smile attractiveness. The aim of this study was to assess the perception of the smile attractiveness between Saudi laypersons, orthodontists, non-orthodontist, and various dental students levels, and to determine how the canine and incisor vertical positions affect the attractiveness of smile. The study is a cross-sectional survey and was conducted at King Abdulaziz University, Jeddah, Saudi Arabia. Six groups of subjects participated in the study: Orthodontic residents (n = 31), prosthodontic, restorative, periodontics specialties residents specialties residents (n = 30), interns (n = 31), fifth year students (n = 41), 6th year students (n = 39), and laypeople (n = 39). Participants were asked to rate the attractiveness of a smile of a female subject photographed using a Minolta DiMage 7i digital camera. The image had been manipulated to produce 2 sets of images; 1 to modify the incisors and 1 to change the canines. The subjects were asked to choose the most and least attractive picture. For the best incisor positions, only the laypeople and prosthodontics liked the original picture, the rest liked +0.5 mm which accentuate the smile curve and make it follow the lower lip line. For the worst incisor position, all groups did not prefer the minus 1.5 reversed smile. For the best canine vertical position, all groups preferred the original position where canine was at the level of the incisal plane. For the worst canine position, they all disliked the minus 1.5 reversed smile. Results confirmed past findings that orthodontists are in general more critical about smile attractiveness than laypersons, but just like other dental specialists. The findings can be used in the esthetic dentistry field, but further research on the study population based on other dental design parameters remain necessary.

Survival of Prosthodontic Restorations Luted with Resin-Based versus Composite-Based Cements: Retrospective Cohort Study

The purpose of this study was to evaluate clinical performance, survival, and complications of indirect composite inlays, onlays, and overlays on posterior teeth. Digital records of 282 patients treated between 2014 and 2018 were accessed and analyzed retrospectively. The included patients received 469 composite restorations luted with seven different resin-based types of cement, i.e., Filtek Ultimate Flow, Enamel Plus, Relyx Ultimate, Harvard Premium Flow, Relyx Unicem, Filtek Bulk Fill Flowable, and Filtek Ultimate. The restorations had been clinically and radiographically evaluated annually. The mechanical and clinical complications, e.g., debonding, fracture, and secondary caries, were evaluated and recorded. The examined restorations exhibited a high survival rate (84.9%), and failure was found in only 71 cases. Fracture was the most common cause (n = 36), followed by prosthetic work release (n = 19) and secondary caries (n = 16). There was a statistically significant difference between failure and cement material (Sig. < 0.001); the composite-based cements (87.2%) had a high survival rate compared to the resin-based cement (72.7%). Similarly, the cements with high viscosity (90.2%) had significantly higher survival rates than the low-viscosity cements (78.9%). Moreover, onlays showed higher longevity compared to overlays (Sig. = 0.007), and patients aged under 55 years showed less complications (Sig. = 0.036). Indirect composite restoration was a successful solution to tooth structure loss. The material of the cementation is an important part of the success. Higher survival rate was found in our study when the fixation materials with high viscosity were used, thus suggesting using these materials with indirect restorations. Composite-based cements had significantly higher survival rate than resin-based cements.

Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry

The Scientific Investigation Committee of the American Academy of Restorative Dentistry offers this review of the 2020 professional literature in restorative dentistry to inform busy dentists regarding noteworthy scientific and clinical progress over the past year. Each member of the committee brings discipline-specific expertise to this work to cover this broad topic. Specific subject areas addressed include prosthodontics; periodontics, alveolar bone, and peri-implant tissues; implant dentistry; dental materials and therapeutics; occlusion and temporomandibular disorders (TMDs); sleep-related breathing disorders; oral medicine and oral and maxillofacial surgery; and dental caries and cariology. The authors focused their efforts on reporting information likely to influence day-to-day dental treatment decisions with a keen eye on future trends in the profession. With the tremendous volume of dentistry and related literature being published today, this review cannot possibly be comprehensive. The purpose is to update interested readers and provide important resource material for those interested in pursuing greater detail. It remains our intent to assist colleagues in navigating the extensive volume of important information being published annually. It is our hope that readers find this work useful in successfully managing the dental patients they encounter.

Comparison of 16.9-year survival of pressed acid etched e.max lithium disilicate glass-ceramic complete and partial coverage restorations in posterior teeth: Performance and outcomes as a function of tooth position, age, sex, and thickness of ceramic material

STATEMENT OF PROBLEM

Long-term clinical data are lacking on the comparison of the survival of adhesively luted pressed e.max lithium disilicate glass-ceramic complete and partial coverage restorations in posterior dentitions and the effect that different technical and clinical variables have on their survival.

PURPOSE

The purpose of this clinical study was to examine and compare the 16.9-year survival of posterior pressed e.max lithium disilicate glass-ceramic complete and partial coverage restorations and associated clinical parameters on the outcome.

MATERIAL AND METHODS

Patients requiring either single-unit posterior defect-specific partial coverage or complete coverage restorations were recruited in a clinical private practice. The participants were offered the options of direct restorations, partial coverage cast gold, or glass-ceramic (lithium disilicate) restorations. Those requiring complete coverage restorations were given the options of complete cast gold, metal-ceramic, or glass-ceramic restorations. Only participants who chose glass-ceramic partial and complete coverage restorations were included in the study. The overall survival of the glass-ceramic restorations was assessed by the clinical factors determined at recall. The effect of various clinical parameters (type of restoration, dental arch, tooth position in the dental arch, age and sex of participant, and ceramic thickness) was evaluated by using Kaplan-Meier survival curves to account for attrition bias and other reasons for failure. The statistical significance of differences between parameters was determined using the log rank test (α=.05).

RESULTS

A total of 738 participants requiring 2392 lithium disilicate restorations in posterior teeth were evaluated. The mean age of the participants at the time of restoration placement was 62 (range: 20-99 years, 302 men and 436 women). Of 2392 units, 1782 were complete and 610 were partial coverage restorations. A total of 22 failures (bulk fracture or large chip) requiring replacement were recorded with the average time to failure 3.5 (0.02-7.9) years. The total time at risk computed for these units was 13227.9 years, providing an estimated failure risk of 0.17% per year. The 16.9-year estimated cumulative survival was 96.49%. The estimated cumulative survival of posterior complete (n=1782) and posterior partial coverage restorations (n=610) was 96.75% at 10.5 years and 95.27% at 16.9 years (P<.05). Of the 22, 16 failures were recorded for the complete coverage restorations. The total time at risk for these restorations was 10144.5 years, providing an estimated risk of 0.16 per year. The other 6 failures recorded occurred for the partial coverage restorations. The total time at risk for these restorations was 3083.5 years, providing an estimated risk of 0.19% per year. No statistically significant difference was found in the survival of posterior complete and partial coverage restorations among men and women, different age groups, or posterior tooth position in the dental arch (P>.05). The thickness of the restoration also had no influence on the survival of glass-ceramic posterior restorations (P>.05).

CONCLUSIONS

Pressed e.max lithium disilicate complete and partial coverage restorations showed high survival rates in posterior teeth over a 16.9-year period, with an overall failure rate of 0.17% per year. Risk of failure at any age was low for both men and women. No statistically significant difference was found in the survival of complete and partial coverage restorations, and none of the confounding variables, including the thickness of the restoration, appeared to have a significant effect on survival.

Current status and research trends of lithium disilicate in dentistry: A bibliometric analysis

STATEMENT OF PROBLEM

Lithium disilicate (LD) is a popular dental ceramic and has been a focus of dental research. Nevertheless, a quantified literature analysis focusing on the research of lithium disilicate is lacking.

PURPOSE

The purpose of this bibliometric analysis was to review the progress of research into lithium disilicate in dentistry, including the identification of contributing researchers, organizations, countries or regions, journals, and the analysis of high-impact keywords and research trending.

MATERIAL AND METHODS

The search was carried out within the topic field of the Web of Science (WoS) database, collecting publications related to LD from between 1996 and 2019. Metadata including the titles, abstracts, keywords, authors, affiliations, countries or regions, and references were extracted. Bibliometric indicators in terms of documents, authors, journals, and keywords were analyzed.

RESULTS

Between 1996 and 2019, the dental research on LD trended upward. Scholars in the United States, Germany, Switzerland, and Brazil actively participated in the research on LD, and publications from the United States had the most citations. The Journal of Prosthetic Dentistry and Dental Materials were the major contributing journals. High-impact terms could be categorized into types of restorative material, types of prostheses, and properties or techniques of materials. Co-occurrence and relative normalized citation analysis of keywords highlighted several research interests, such as comparison studies between LD and zirconia, computer-aided design and computer-aided manufacturing (CAD-CAM) techniques, and the performance of complete coverage LD restorations.

CONCLUSIONS

With the global upsurge in research on lithium disilicate, extensive collaborations and citations have been noted among authors, institutions, and countries or regions. Research hotspots include types of restorative material, types of prostheses, and properties or techniques of materials.