Arsenic in Chinese coals: distribution, modes of occurrence, and environmental effects

Arsenic removal from coal by ferric chloride enhanced leaching under ultraviolet irradiation during flue gas desulphurization with coal slurry

During coal combustion, the harmful element arsenic can be released into environment and cause potential significant harm to human beings. Therefore, it is very important to study the removal of arsenic from coal before combustion. In this work, simulated SO2-containing flue gas was used to leach arsenic from coal in a 1 L UV photoreactor. The effects of FeCl3, ultraviolet (UV), pH and the Cl-/Fe3+ molar ratio on arsenic leaching and SO2 removal were experimentally investigated and the enhancing mechanism was analysed. Experimental results demonstrated that FeCl3 and UV could efficiently increase iron and arsenic leaching percentages and SO2 removal efficiency. UV irradiation could induce the oxidation of most trivalent arsenic. The arsenic leaching percentage was significantly larger than that of iron. Low pH was favourable for iron and arsenic leaching. The optimal Cl-/Fe3+ molar ratio was determined to be 3:1. The introduced ferric chloride could not only increase the concentrations of free radicals and ferric iron oxidants, the chloride ion might also impede the formation of passive coatings, thus increasing the arsenic leaching percentage, intensifying the oxidation of trivalent arsenic and enhancing the removal of SO2.

Health risks and sources of trace elements and black carbon in PM2.5 from 2019 to 2021 in Beijing

A comprehensive health risk assessment of PM2.5 is meaningful to understand the current status and directions regarding further improving air quality from the perspective of human health. In this study, we evaluated the health risks of PM2.5 as well as highly toxic inorganic components, including heavy metals (HMs) and black carbon (BC) based on long-term observations in Beijing from 2019 to 2021. Our results showed that the relative risks of chronic obstructive pulmonary disease, lung cancer, acute lower respiratory tract infection, ischemic heart disease, and stroke decreased by 4.07%-9.30% in 2020 and 2.12%-6.70% in 2021 compared with 2019. However, they were still at high levels ranging from 1.26 to 1.77, in particular, stroke showed the highest value in 2021. Mn had the highest hazard quotient (HQ, from 2.18 to 2.56) for adults from 2019 to 2021, while Ni, Cr, Pb, As, and BC showed high carcinogenic risks (CR > 1.0×10-6) for adults. The HQ values of Mn and As and the CR values of Pb and As showed constant or slight upwards trends during our observations, which is in contrast to the downward trends of other HMs and PM2.5. Mn, Cr, and BC are crucial toxicants in PM2.5. A significant shrink of southern region sourcesof HMs and BCshrank suggests the increased importance of local sources. Industry, dust, and biomass burning are the major contributors to the non-carcinogenic risks, while traffic emissions and industry are the dominant contributors to the carcinogenic risks in Beijing.

Coupling sedimentary records of anthropogenic metal(loid)s in urban waterscape parks with the "Coal to Gas" transition

Energy consumption structure has been adjusted worldwide as a measure to reduce CO2 emission and mitigate air pollution. The "Coal to Gas" transition in mainland China has successfully controlled air pollution in recent decades, but its impacts on the environment beyond air quality improvement remain unknown. With 210Pb dating, this study chronicled profiles of eight anthropogenic metal(loid)s in sediment core from 14 waterscape parks across the Ring Road Network of Beijing, China. Six sediment cores were dated showing a timing coupling of metal(loid) loadings with annual coal consumption during the increasing period before 2000. Two downwind sediment cores in downtown Beijing presented such couplings in both increasing and descending periods for coal consumption before and after 2000, respectively, close to the tipping point observed in 2002 for primary energy consumption efficiency. Evidence from stable Pb isotope composition and exceedances of Cu loadings against sediment quality guidelines of China and the USA suggest that vehicular sources have been dominating metal(loid) loadings in sedimentation in these waterscape parks after the "Coal to Gas" transition. These findings would be helpful in identifying environmental impact patterns resulting from shifts in energy consumption structure and dominance of emission sources thereafter.

Transgenerational Effects of Arsenic Exposure on Learning and Memory in Rats: Crosstalk between Arsenic Methylation, Hippocampal Metabolism, and Histone Modifications

Arsenic (As) is widely present in the natural environment, and exposure to it can lead to learning and memory impairment. However, the underlying epigenetic mechanisms are still largely unclear. This study aimed to reveal the role of histone modifications in environmental levels of arsenic (sodium arsenite) exposure-induced learning and memory dysfunction in male rats, and the inter/transgenerational effects of paternal arsenic exposure were also investigated. It was found that arsenic exposure impaired the learning and memory ability of F0 rats and down-regulated the expression of cognition-related genes Bdnf, c-Fos, mGlur1, Nmdar1, and Gria2 in the hippocampus. We also observed that inorganic arsenite was methylated to DMA and histone modification-related metabolites were altered, contributing to the dysregulation of H3K4me1/2/3, H3K9me1/2/3, and H3K4ac in rat hippocampus after exposure. Therefore, it is suggested that arsenic methylation and hippocampal metabolism changes attenuated H3K4me1/2/3 and H3K4ac while enhancing H3K9me1/2/3, which repressed the key gene expressions, leading to cognitive impairment in rats exposed to arsenic. In addition, paternal arsenic exposure induced transgenerational effects of learning and memory disorder in F2 male rats through the regulation of H3K4me2 and H3K9me1/2/3, which inhibited c-Fos, mGlur1, and Nmdar1 expression. These results provide novel insights into the molecular mechanism of arsenic-induced neurotoxicity and highlight the risk of neurological deficits in offspring with paternal exposure to arsenic.

LC-MS based untargeted metabolomics studies of the metabolic response of Ginkgo biloba extract on arsenism patients

Arsenic is an environmentally ubiquitous toxic metalloid. Chronic exposure to arsenic may lead to arsenicosis, while no specific therapeutic strategies are available for the arsenism patients. And Ginkgo biloba extract (GBE) exhibited protective effect in our previous study. However, the mechanisms by which GBE protects the arsenism patients remain poorly understood. A liquid chromatography-mass spectrometry (LC-MS) based untargeted metabolomics analysis was used to study metabolic response in arsenism patients upon GBE intervention. In total, 39 coal-burning type of arsenism patients and 50 healthy residents were enrolled from Guizhou province of China. The intervention group (n = 39) were arsenism patients orally administered with GBE (three times per day) for continuous 90 days. Plasma samples from 50 healthy controls (HC) and 39 arsenism patients before and after GBE intervention were collected and analyzed by established LC-MS method. Statistical analysis was performed by MetaboAnalyst 5.0 to identify differential metabolites. Multivariate analysis revealed a separation in arsenism patients between before (BG) and after GBE intervention (AG) group. It was observed that 35 differential metabolites were identified between BG and AG group, and 30 of them were completely or partially reversed by GBE intervention, with 14 differential metabolites significantly up-regulated and 16 differential metabolites considerably down-regulated. These metabolites were involved in promoting immune response and anti-inflammatory functions, and alleviating oxidative stress. Taken together, these findings indicate that the GBE intervention could probably exert its protective effects by reversing disordered metabolites modulating these functions in arsenism patients, and provide insights into further exploration of mechanistic studies.

Health risk assessment and potential sources of metals in riparian soils of the Wujiang River, China

In order to understand the pollution status of metals in the riparian soils along the Wujiang River, 26 sampling sites in the mainstream and tributary streams were selected for investigation. The geo-accumulation index (Igeo), Nemerow integrated pollution index, and potential ecological risk index were applied to evaluate the contamination status and ecological risks of metals. Results revealed that the average concentrations of As, Cd, Cr, Cu, Mn, Ni, Pb, and Zn were 12.20, 0.51, 84.01, 57.42, 922.57, 38.37, 38.06, and 127.82 mg/kg, respectively. The metal contamination degree and ecological risks in the upper reaches were significantly higher than those in the middle and lower reaches of the Wujiang River. Cd was the dominant contamination metal. Significant non-carcinogenic and carcinogenic risks of metals were found in children based on the hazard index and carcinogenic risk. As was the main non-carcinogenic and carcinogenic pollutant metal in both adults and children. According to principal component analysis, hierarchical clustering analysis, and absolute principal component scores-multiple linear regression, anthropogenic sources (mining and agricultural activities) contributed most to Zn, Pb, Cr, Cd, Cu, and Ni, with contribution rates of 89.14, 82.32, 74.46, 72.12, 68.52, and 61.02%, respectively. Natural sources contributed most to Mn, with a contribution rate of 83.07%. Unidentified sources contributed most to As, with a contribution rate of 47.27%.

Fine particulate matter from brick kilns site and roadside in Lahore, Pakistan: Insight into chemical composition, oxidative potential, and health risk assessment

Background

Human health is seriously threatened by particulate matter (PM) pollution, which is a major environmental problem. A better indicator of biological responses to PM exposure than its mass alone is the PM "oxidative potential (OP)," or ability to oxidize target molecules. When reactive oxygen species (ROS) are generated in the OP in excess of the antioxidant capacity of body due to PM components such metals and organic species, it causes inflammation, deoxyribonucleic acid (DNA), proteins, and lipids damage.

Method

The samples of fine particulate matter (PM2.5) are collected from the brick kiln site and the roadside in Lahore, Pakistan. The organic carbon (OC) and elemental carbon (EC) were estimated by carbon analyzer (DRI 2001A) using the thermal/optical transmittance (TOT) protocol. The water-soluble organic carbon (WSOC) concentration was determined using a total organic carbon analyzer (Shimadzu TOC-L CPN). Ion chromatography (Dionex ICS-900) with a conductivity detector was used to analyze the water-soluble anions (Cl-, NO3-, and SO42-) and cations (NH4+, Na+, K+, Mg2+, and Ca2+). Inductively coupled plasma-mass spectrometry (iCAP TQ ICP-MS, Thermo Scientific) was used to determine the concentrations of metals in the solution. The dithiothreitol (DTT) consumption rate was calculated using a spectrophotometer at a wavelength of 412 nm.

Results

The mean concentrations of PM2.5 at the brick kiln site and roadside reported are 509.3 ± 32.3 μg/m3 and 467.5 ± 24.9 μg/m3, and the average OC/EC ratio is 1.9 ± 0.4 and 2.1 ± 0.1. primary organic carbon (POC) contributed more to OC than secondary organic carbon (SOC), which indicated the dominance of primary combustion sources. The anion equivalent (AE) to cation equivalent (CE) ratio indicated that PM2.5 is acidic at both sites due to the dominance of NO3- and SO42-. The DTT consumption rate normalized by PM2.5 mass (DTTm) and DTT consumption rate normalized by air volume (DTTv) of PM2.5 at the roadside samples are higher than at the brick kiln site due to the higher contribution of ionic species to the mass of PM2.5. Carbonaceous species of PM2.5 at both sampling sites are significantly correlated with DTTv of PM2.5, while metallic species behaved differently. The incremental lifetime cancer risk (ILCR) values (lung cancer) of As and Cr at both sampling sites, while the ILCR value of Cd at the roadside samples is exceeding the permissible limits for adults and children. The lifetime average daily dose (LADD) value for adults is higher than that for children, indicating that children are less vulnerable to metals.

Conclusion

The concentration of PM2.5 at both sampling sites were exceeding the permissible limits of Pakistan' National Environmental Quality Standard (NEQS) and posing risk to the health of the local population. The POC and SOC contribution to OC at the brick kiln site and roadside in Lahore were 84.6%, 15.4% and 84.4%, 15.6%. POC at both sampling sites were the dominant carbon species indicating the dominance of primary combustion sources. The residence of Lahore poses the lung cancer risk due to Cr, As, and Cd at both sampling sites. The results of this study provide important data and evidence for further evaluation of the potential health risks of PM2.5 from brick kiln site and road side in Pakistan and formulation of efficient air-pollution control measures.

Unveiling the LncRNA-miRNA-mRNA Regulatory Network in Arsenic-Induced Nerve Injury in Rats through High-Throughput Sequencing

Arsenic is a natural toxin which is widely distributed in the environment, incurring diverse toxicities and health problems. Previous studies have shown that long non-coding RNAs (LncRNAs) are also reported to contribute to As-induced adverse effects. LncRNAs are involved in the development of nerve injury, generally acting as sponges for microRNAs (miRNAs). This study aimed to investigate the competitive endogenous RNA (ceRNA) regulatory networks associated with arsenic-induced nerve damage. A total of 40 male Wistar rats were exposed to different doses of arsenic for 12 weeks, and samples were collected for pathological observation and high-throughput sequencing. The ceRNA network was constructed using Cytoscape, and key genes were identified through the PPI network and CytoHubba methods. A real-time quantitative PCR assay was performed to validate gene expression levels. The results showed that subchronic exposure to arsenic in drinking water resulted in pathological and ultrastructural damage to the hippocampal tissue, including changes in neuron morphology, mitochondria, and synapses. Exposure to arsenic results in the dysregulation of LncRNA and mRNA expression in the hippocampal tissues of rats. These molecules participated in multiple ceRNA axes and formed a network of ceRNAs associated with nerve injury. This study also verified key molecules within the ceRNA network and provided preliminary evidence implicating the ENRNOT-00000022622-miR-206-3p-Bdnf axis in the mechanism of neural damage induced by arsenic in rats. These findings provide novel insights into the underlying mechanism of nervous system damage induced by arsenic exposure.

Arsenic exposure was associated with lung fibrotic changes in individuals living near a petrochemical complex

Individuals residing near petrochemical complexes have been found to have increasing the risk of respiratory distress and diseases. On visit 1 in 2016, all participants underwent urinary arsenic measurement and low-dose computed tomography (LDCT). The same participants had LDCT performed at visit 2 in 2018. Our study revealed that individuals with lung fibrotic changes had significantly higher levels of urinary arsenic compared to the non-lung fibrotic changes group. Moreover, we found that participants with urinary arsenic levels in the highest sextile (> 209.7 μg/g creatinine) had a significantly increased risk of lung fibrotic changes in both visit 1 (OR = 1.87; 95% CI= 1.16-3.02; P = 0.010) and visit 2 (OR = 1.74; 95% CI = 1.06-2.84; P = 0.028) compared to those in the lowest sextile (≤ 41.4 μg/g creatinine). We also observed a significantly increasing trend across urinary arsenic sextile in both visits (Ptrend = 0.015 in visit 1 and Ptrend = 0.026 in visit 2). Furthermore, participants with urinary arsenic levels in the highest sextile had a significantly increased risk of lung fibrotic positive to positive (OR = 2.18; 95% CI: 1.24, 3.82; P = 0.007) compared to the lowest sextile (reference category: lung fibrotic negative to negative). Our findings provide support for the hypothesis that arsenic exposure is significantly associated with an increased risk of lung fibrotic changes. It is advisable to reduce the levels of arsenic exposure for those residing near such petrochemical complexes.

Dual-functional effect encompassing adsorption and catalysis by Mn-modified iron-based sorbents for arsenic removal: Experimental and DFT study

Arsenic oxidation plays a crucial role in its removal, which has been identified in numerous studies. However, the mechanisms, especially reaction pathways of arsenic oxidation on sorbent surfaces remain inadequately explored. In this work, the effects of Mn doping on arsenic adsorption and oxidation were first verified by adsorption experiments. Subsequently, DFT calculations were carried out to identify alterations in the adsorption energies, active sites, and oxidation pathways. By integrating the experimental and simulation results, a dual-functional framework encompassing adsorption and catalysis of Mn-modified Fe-based material was distinctly established. For adsorption, the introduction of manganese into iron-based sorbent considerably enhanced As2O3 adsorption owing to the increased active sites available for As2O3 chemisorption and the promotion of surface nucleophilicity. Concerning oxidative catalysis, the incorporation of MnO2 augmented surface catalytic oxidation and provided a substantial amount of active Oload. Consequently, the arsenic oxidation occurring on the Mn-modified sorbent surfaces possessed a lower oxidation RDS energy barrier and a shorter oxidation pathway than those on the bare sorbent surfaces. These experimental and simulation results provide a theoretical basis for the design and application of efficient gaseous arsenic adsorbents.

Coal slime as a good modifier for the restoration of copper tailings with improved soil properties and microbial function

In recent years, the solid wastes from the coal industry have been widely used as soil amendments. Nevertheless, the impact of utilizing coal slime for copper tailing restoration in terms of plant growth, physicochemical characteristics of the tailing soil, and microbial succession remains uncertain.Herein, the coal slime was employed as a modifier into copper tailings. Their effect on the growth and physiological response of Ryegrass, and the soil physicochemical properties as well as the bacterial community structure were investigated. The results indicated that after a 30-day of restoration, the addition of coal slime at a ratio of 40% enhanced plant growth, with a 21.69% rise in chlorophyll content, and a 62.44% increase in peroxidase activity. The addition of 40% coal slime also increased the content of nutrient elements in copper tailings. Following a 20-day period of restoration, the concentrations of available copper and available zinc in the modified tailings decreased by 39.6% and 48.51%, respectively, with 40% of coal slime added. In the meantime, there was an observed augmentation in the species diversity of the bacterial community in the modified tailings. The alterations in both community structure and function were primarily influenced by variations in pH value, available nitrogen, phosphorus, potassium, and available copper. The addition of 40% coal slime makes the physicochemical properties and microbial community evolution of copper tailings reach a balance point. The utilization of coal slime has the potential to enhance the physicochemical characteristics of tailings and promote the proliferation of microbial communities, hence facilitating the soil evolution of two distinct solid waste materials. Consequently, the application of coal slime in the restoration of heavy metal tailings is a viable approach, offering both cost-effectiveness and efficacy as an enhancer.

Source analysis and health risk assessment of heavy metals in agricultural land of multi-mineral mining and smelting area in the Karst region - a case study of Jichangpo Town, Southwest China

In the Karst region of Southwest China, the content of soil heavy metals is generally high because of the geological background. Moreover, Southwest China is rich in mineral resources. A large number of mining and smelting activities discharge heavy metals into surrounding soil and cause superimposed pollution, which has drawn widespread concern. Due to the large variation coefficients of soil heavy metals in the Karst region, it is particularly essential to select appropriate analysis methods. In this paper, Jichangpo in Puding County, a Karst area with multi-mineral mining and smelting, is selected as the research object. A total of 368 pieces of agricultural topsoil in the study area are collected. The pollution level of heavy metals in agricultural soil is evaluated by the geological accumulation index (I_geo) and enrichment factor (EF). Absolute Factor Score/Multiple Linear Regression (APCS/MLR), geographic information system (GIS), self-organizing mapping (SOM), and random forest (RF) are used for the source allocation of soil heavy metals. Finally, the combination of APCS/MLR and health risk assessment model is adopted to evaluate the risks of heavy metal sources and determine the priority-control source. The results show that the average values of soil heavy metals in the study area (Cd, Hg, As, Pb, Cr, Cu, Zn, and Ni) exceed the background values of corresponding elements in Guizhou Province. Three sources of heavy metals are identified by combining APCS/MLR, GIS, SOM, and RF. Zn (63.47%), Pb (55.77%), Cd (58.98%), Hg (32.17%), Cu (14.41%), and As (5.99%) are related to lead-zinc mining and smelting; Cr (98.14%), Ni (90.64%), Cu (76.93%), Pb (43.02%), Zn (35.22%), Cd (28.97%), Hg (22.44%), and As (5.84%) are mixed sources (natural and agricultural sources); As (88.17%), Hg (45.39%), Cd (12.04%), Cu (8.66%), and Ni (6.72%) are related to the mining and smelting of coal and iron. The results of health risk assessment show that only As poses a non-carcinogenic risk to human health. 3.31% of the sampling points of As have non-carcinogenic risks to adults and 10.22% to children. In terms of carcinogenic risks, As, Pb, and Cr pose carcinogenic risks to adults and children. Combined with APCS/MLR and the health risk assessment model, the mining and smelting of coal and iron is the priority-control pollution source. This paper provides a comprehensive method for studying the distribution of heavy metal sources in areas with large variation coefficients of soil heavy metals in the Karst region. Furthermore, it offers a theoretical basis for the management and assessment of heavy metal pollution in agricultural land in the study area, which is helpful for researchers to make strategic decisions on food security when selecting agricultural land.

Chromium in Chinese coals: geochemistry and environmental impacts associated with coal-fired power plants

Chromium (Cr), one of the prime hazardous trace elements in coals, may engender adverse effects on eco-environment and threaten human health during utilization of coal. Based on the samples obtained in our laboratory and published literature, the abundance and modes of occurrence of Cr in Chinese coals, and the environmental impacts associated with coal-fired power plants (CFPPs) were elucidated in this study. With a total of 1397 sets of data, the mean concentration of Cr in Chinese coals was calculated as 21.33 μg/g by the "reserve-concentration" weighted calculation method. Spatially, the average Cr contents increased gradually from North China to South China. Temporally, coals from T₃, E-N and P₂ were relatively enriched in Cr compared to the other geological time. The Cr concentration in coal varied with different coal ranks. The geological factors accounted for Cr enrichment in coals could be divided into the primary, secondary and epigenetic processes. Higher percentages of organically Cr occurred in low-rank coals, while inorganically associated Cr was mainly found in clay minerals. After coal combustion, most of Cr was enriched in solid wastes (e.g., fly ash and bottom ash). The leaching of Cr from solid wastes in the rainy season (especially acid rain) needs to be a concern for CFPPs. It was estimated that the atmospheric emission of Cr from CFPPs increased annually from 2015 to 2019 and reached approximately 159 tons in 2019.

Arsenic Trioxide Triggers Mitochondrial Dysfunction, Oxidative Stress, and Apoptosis via Nrf 2/Caspase 3 Signaling Pathway in Heart of Ducks

Arsenic is a common environmental pollutant and poses a serious threat to human and animal health. In this study, we used the ducks to mimic arsenic trioxide (ATO) exposure and investigated the mechanism of cardiac toxicity. The results indicated that ATO inhibited the body and organ growth of ducks, led to an increase in LDH content, and caused obvious deformity, ischemia infarction. It is found that ATO exacerbated the swell of mitochondrial and the contraction of cell nuclei in the heart of ducks through transmission electron microscopy (TEM). ATO also induced an increase in MDA content; inhibited the activation of the Nrf 2 pathway; downregulated the expression of mRNA and protein of Nrf 2, HO-1, and SOD-1; and upregulated the expression of mRNA and protein of Keap 1. At the same time, ATO induced apoptosis which not only upregulated the expression levels of mRNA and proteins (Caspase 3, Cyt-C, P53, Bax) but also decreased the mRNA and protein expression level of Bcl-2. These results indicated that ATO can lead to oxidative stress and apoptosis in the heart of ducks. In general, our research shows that ATO triggers mitochondrial dysfunction, oxidative stress, and apoptosis via Nrf 2/Caspase 3 signaling pathway in the heart of ducks.

Pollution characteristics and health risk assessment of PM2.5-bound arsenic: a 7-year observation in the urban area of Jinan, China

The aim of the study was to analyze the temporal trends, pollution sources, and carcinogenic health risks associated with PM_2.5-bound arsenic (As). A total of 588 PM_2.5 samples were collected in Jinan during January 2014-December 2020. The content and distribution characteristics were determined for As and Al in PM_2.5, and the pollution sources were identified based on enrichment factors (EFs). The health risk of inhalation exposure to As was estimated using the risk assessment methods recommended by the United States Environmental Protection Agency (US EPA). The annual average concentration of As in PM_2.5 was 4.5-17.5 ng m^-3, which was 0.8-2.9 times higher than the limit ruled by the European Union and China's Ambient Air Quality Standards (6 ng m^-3). From 2014 to 2020, the As concentration gradually decreased from 17.5 to 4.9 ng m^-3. After 2017, the concentration was close to the level required by the atmospheric quality standard (6 ng m^-3). The PM_2.5 and arsenic concentrations in the heating season were significantly higher than those in the non-heating season. The EF of As ranged from 144 to 607, which was higher than 10. The cancer risk of As in PM_2.5 decreased to the lowest values (heating season 1.0 × 10^-5 and non-heating season 7.1 × 10^-6, respectively) in 2019. As in Jinan mainly came from anthropogenic pollution. The level of As pollution has been significantly reduced in recent years, but there is still a high risk of carcinogenesis. Air pollution control strategies and guidelines need to be implemented in urban areas, especially during the heating season in winter and spring.

Contamination, sources and health risks of toxic elements in soils of karstic urban parks based on Monte Carlo simulation combined with a receptor model

Understanding the health risks of toxic elements (TEs) in urban park soils and determining their priority control factors are crucial for public health and pollution management. Soil samples were collected from 33 urban parks in Guiyang, a typical karstic city. For each park, 15-45 topsoil samples were collected according to the area and then thoroughly mixed to obtain a representative sample. The results showed that the mean concentrations of TEs in park soils (22.5, 0.37, 88.6, 43.7, 0.26, 39.9, 44.7, and 101.0 mg/kg for As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn, respectively) were higher than their background values. Approximately 54.5% and 33.3% of enrichment factor (EF) values reached moderately enriched to significantly enriched levels for Cd and Hg, respectively. Moreover, 54.5% and 42.4% of monomial potential ecological index (EI) values were at considerable to high risk levels for Cd and Hg, respectively. These results illustrate that Cd and Hg pose high ecological risks. According to the potential ecological risk index (RI) values, 21.2% of the parks were exposed to considerable ecological risk and 48.5% were at moderate risk. Based on the positive matrix factorization (PMF) model, four sources governing TE contamination (including coal combustion, natural sources, traffic emissions, and industrial activities) were identified, with contribution rates of 32.3%, 31.0%, 19.6%, and 17.1%, respectively. A probabilistic health risk assessment showed acceptable non-carcinogenic risks and high levels of carcinogenic risk in all populations. Based on the source-specific health risk assessment, arsenic from coal combustion was determined to be a major contributor to human health risks. Although several efforts have been made by the local government to eliminate coal-borne arsenicosis, our results revealed that the accumulation of arsenic in the soil due to coal combustion poses a potential threat to human health.

Anthropogenic metal loads in nearshore sediment along the coast of China mainland interacting with provincial socioeconomics in the period 1980-2020

Metal pollutions have been accused of consequences of the anthropogenic activities but few quantitative delineations between environmental metal loads and socioeconomic development presented. A meta-data analysis study was carried out on metal loads in coastal sediment in the provinces of China mainland reported in literature in the period 1980-2020. Eight metals with well-recognized anthropogenic sources were selected including arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn). Screened with three criteria, a total of 1173 records from 405 published studies were finalized as the metal loads dataset in coastal sediment. Evident provincial patterns were observed among the selected metals but element dependent after transformed to sample number weighted contents (C_w). Against the regional marine backgrounds, anthropogenic increment rate (R_anthrop) of metal loads in nearshore sediment presented better provincial differentiation with the extremes at 7.58 for As and 62.13 for Cu in Guangdong, 91.25 for Hg in Zhejiang, 3.19 for Ni in Tianjin, 7.72 for Pb in Fujian, and 13.51 for Zn in Liaoning. Metal loads in coastal sediment could be explained by characteristic industries in the provinces. Nearshore sediment in Guangdong had high risk to metal loads and other provinces at low-to-medium risk to the lowest thresholds of sediment quality guidelines in China and USA. Canonical correlations identified considerably interactive explanations between integrative hazard quotients (ƩHQ) of the selected metals in nearshore sediment and non-agricultural GDP per capita of non-agricultural population/urban population percentile provincially but few significant fittings by the classic environmental Kuznets Curve model quantitatively. Findings of this study explored uncertainty from both sides in explaining the interactions, i.e., data integrity of metal loads in coastal sediment in literature and appropriation of socioeconomic indicators in relation to metal emission industries.

Assessing the Association of Element Imbalances With Arsenism and the Potential Application Value of Rosa roxburghii Tratt Juice

Endemic arsenism caused by coal burning is a unique type of biogeochemical disease that only exists in China, and it is also a disease of element imbalances. Previous studies have shown that element imbalances are involved in the pathogenesis of arsenic; however, the interaction between the various elements and effective preventive measures have not been fully studied. This study first conducted a cross-sectional study of a total of 365 participants. The results showed that arsenic exposure can increase the content of elements (Al, As, Fe, Hg, K, and Na) in the hair (p < 0.05), but the content of other elements (Ca, Co, Cu, Mn, Mo, P, Se, Sr, V, and Zn) was significantly decreased (p < 0.05). Also, the high level of As, Fe, and Pb and the low level of Se can increase the risk of arsenism (p < 0.05). Further study found that the combined exposure of Fe–As and Pb–As can increase the risk of arsenism, but the combined exposure of Se–As can reduce the risk of arsenism (p < 0.05). In particular, a randomized, controlled, double-blind intervention study reveals that Rosa roxburghii Tratt juice (RRT) can reverse the abovementioned element imbalances (the high level of Al, As, and Fe and the low level of Cu, Mn, Se, Sr, and Zn) caused by arsenic (p < 0.05). Our study provides some limited evidence that the element imbalances (the high level of As, Fe, and Pb and the low level of Se) are the risk factors for the occurrences of arsenism. The second major finding was that RRT can regulate the element imbalances, which is expected to improve arsenism. This study provides a scientific basis for further understanding a possible traditional Chinese health food, RRT, as a more effective detoxication of arsenism.

Study on the Mineralogical and Geochemical Characteristics of Arsenic in Permian Coals: Focusing on the Coalfields of Shanxi Formation in Northern China

The Huainan Coalfield is a typical multi-coal seam coalfield. In order to systematically investigate the distribution, occurrence, and integration of arsenic (As) in Shanxi coal, 26 coal samples and three rock samples were collected in the No. 1 coal seam of Huainan coalfield. The minerals, major element oxides, and As were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), polarized light microscopy, X-ray fluorescence spectroscopy (XRF) and inductively coupled plasma-mass spectrometry (ICP-MS). The results indicated that the coals of Shanxi Formation were characterized by very low ash yields and low total sulfur contents. The identified minerals by XRD in the studied coals are dominated by kaolinite, quartz, calcite, and a lesser amount of pyrite. The As content ranges from 10.33 mg/kg to 95.03 mg/kg, with an average of 44.74 mg/kg. Compared with world coals, the studied coals have higher contents of As, which are characterized by enrichment. Based on statistical analyses, As shows an affinity to ash yield and possible association with silicate minerals. The contents of As in all occurrence fractions were ranked from high to low as follows: residual > Fe-Mn oxides > organic > exchangeable > carbonate. Using B, w(Sr)/w(Ba) and w(B)/w(Ga) geochemical parameter results to invert the depositional environment of the Huainan Shanxi Formation, a suitable coal-forming environment can cause relatively enriched As in coal.

Persistent arsenate-iron(iii) oxyhydroxide-organic matter nanoaggregates observed in coal

Understanding how natural nanoaggregates of iron (Fe) and organic matter (OM), currently identified in organic rich soil or peat, interact with metals and metalloids is environmentally significant. Coal is also organic-rich and exemplifies anoxic sedimentary environments with Fe usually as pyrite and not oxides. Here, we analyze the local structure of Fe (6880-21 700 mg kg^-1) and As (45-5680 mg kg^-1) in representative Guizhou coal samples using X-ray absorption near-edge structure and extended X-ray absorption fine structure (XANES and EXAFS) to illustrate how Fe(iii) and As(v) are preserved in coal formed from reduced, organic-rich precursors. Arsenic XANES indicates that >80% of As exists as As(v) with <14% of As associated with sulfides in 5 Guizhou coal samples, confirming published but unexplained results. An As-Fe shell at 3.25-3.29 Å in the As EXAFS suggests that this As(v) is adsorbed on Fe(iii) oxyhydroxides as evidenced by Fe EXAFS in these coal samples. Significantly, lower Fe-Fe coordination numbers (CN) of 0.6-1.1 relative to those in 2-line ferrihydrite (CN = 1.6) and goethite (CN = 2.1) suggest that these Fe(iii) oxyhydroxides are likely Fe-OM nanoaggregates protected by OM encapsulation and adsorption of arsenate. Such structurally stabilized composites of As(v)-Fe(iii)-OM may be more widely distributed and allow oxidized As and Fe to persist in other organic-rich, reducing environments.

Assessing the risk of coal-burning arsenic-induced liver damage: a population-based study on hair arsenic and cumulative arsenic

Exposure to arsenic-contaminated air and food caused by the burning of coal in unventilated indoor stoves is a major environmental public health concern in Guizhou Province, China. The liver is one of the main target organs for coal-fired arsenic exposure; however, there is little information about the risk assessment between cumulative arsenic exposure and the prevalence of liver damage. This study first evaluated the chronic daily intake (CDI) for two exposure pathways (inhalation and ingestion) and five environmental media (i.e., indoor and outdoor air, drinking water, rice, corn, and chili peppers) in 1998, 2006, 2014, and 2017. Then, the dose-effect and dose-response relationship between hair arsenic (HA) and cumulative arsenic (CA) levels and liver damage was analyzed. The results clearly show that the CDI in 1998 was 34.9 μg·kg^-1·d^-1, 22.9 μg·kg^-1·d^-1 in 2006, 11.7 μg·kg^-1·d^-1 in 2014, and 6.7 μg·kg^-1·d^-1 in 2017 in the arsenic exposure area. All of these values were higher than the daily baseline level of 3.0 μg·kg^-1·d^-1 as recommended by the Joint FAO/WHO Expert Committee on Food Additives (JECFA), and the increased HA and CA can increase the risk of coal-fired arsenic-induced liver damage. In addition, we analyzed the possible maximum acceptable CA exposure level for coal-fired arsenic-induced liver damage using the Bayesian benchmark dose. The recommended maximum acceptable CA exposure level for liver damage caused by coal-burning arsenic is 7120 mg. This study provides scientific insight into understanding the dose-response relationship of liver damage caused by coal-burning arsenic exposure and the monitoring and prevention of arsenic poisoning.

Heavy metal- and organic-matter pollution due to self-heating coal-waste dumps in the Upper Silesian Coal Basin (Poland)

This study provides potential insight between self-heating coal-waste dumps and related environmental pollution in southern Poland. Samples collected from dumps in the Upper Silesian Coal Basin were used to quantify released contents of organic- and inorganic pollutants, i.e., polycyclic aromatic hydrocarbons (PAHs) and trace elements (Pb, Cd, Cr, Cu, Zn, Ni, Hg, As). Elevated Hg concentrations (~100-1078 mg/kg) and Pb (~600-2000 mg/kg) attest to the evaporation of these metals from deeper parts of the dumps. The acidic pH levels (3.0-4.5) may help to mobilize these elements. Pearson's correlation coefficients for samples analyzed by AAS and ICP-MS indicate a similar origin for Cd, Zn, and As. Mostly 2- and 3-ring PAHs, especially anthracene in burnt soil, dominate in the samples. Chlorinated PAHs, thiophenol, pyridines, quinolines (and derivatives) in thermally-altered samples, and waste containing pyrolytic bitumen indicate coking conditions. The high levels of Hg, Pb, and Cd, and chlorinated PAHs and nitrogen heterocycles formed or enriched during self-heating in these dumps should be deemed a significant environmental hazard. Calculating the lifetime cancer risks due to PAHs and heavy metals accumulations in the dumps are substantial, and access to these dumps should be prohibited.

Characteristics, sources, and health risks of PM2.5-bound trace elements in representative areas of Northern Zhejiang Province, China

This study aimed to characterize PM_2.5-bound trace elements in Northern Zhejiang Province (NZP), one of the most economically prosperous regions in China, and assess the associated health risks for the general populations. A year-long sampling campaign was conducted at four sites representative of urban, suburban, and rural areas of NZP. The average of the sum of twenty trace elements in PM_2.5 was 2.8 ± 0.4 μg m^-3, dominated by K, Al, Fe, Mg, Zn, and V (>100 ng m^-3). The highest total elements' concentration occurred in winter, followed by autumn, spring, and summer. Enrichment factors and principal component analysis (PCA) revealed that the major sources of trace elements in NZP were fossil fuel combustion, biomass burning, crustal dust, traffic, and industrial emissions. Elevated concentrations of certain elements reflected featured sources in different areas, e.g., V and Ni from heavy oil combustion in the port city, and Cu, Fe and Ba from traffic emissions in urban areas. Arsenic (As) represented the major non-cancer risk driver as its hazard quotient was 8.7. The cumulative cancer risk from all the carcinogenic elements was 1.7 × 10^-3 in NZP, exceeding the upper limit (10^-4) of the acceptable risk range. As and Cr contributed 33% and 66%, respectively, and thus were regarded as cancer risk drivers. The high health risks from PM_2.5-bound elements warrant future actions to control their emissions in this region. Priorities should target industrial operations and coal combustion emissions, as informed by the risk drivers.

A complete atmospheric emission inventory of F, As, Se, Cd, Sb, Hg, Pb, and U from coal-fired power plants in Anhui Province, eastern China

Anhui Province is the most important energy production base for eastern China. Many large pithead coal-fired power plants are being operated in the coal-rich Huainan and Huaibei coalfields in northern Anhui. To assess the environmental risks of local coal-fired power plants, a complete atmospheric emission inventory of F, As, Se, Cd, Sb, Hg, Pb, and U from coal-fired power plants in Anhui was compiled by a simple mass-balance-based method. The results indicated that the atmospheric emissions of F, As, Se, Cd, Sb, Hg, Pb, and U in 2017 from the Anhui coal-fired power plants were 578 t, 2.01 t, 15.3 t, 0.57 t, 0.18 t, 2.80 t, 23.7 t, and 0.099 t, respectively. The emission factor is the major contributor to the uncertainties in this inventory. With increasing energy demand by the more developed eastern China region, the atmospheric emissions of volatile hazardous elements will continue to increase in the near future.

A Model for Predicting Arsenic Volatilization during Coal Combustion Based on the Ash Fusion Temperature and Coal Characteristic

Arsenic emission from coal combustion power plants has attracted increasing attention due to its high toxicity. In this study, it was found that there was a close relationship between the ash fusion temperature (AFT) and arsenic distribution based on the thermodynamic equilibrium calculation. In addition to the AFT, coal characteristics and combustion temperature also considerably affected the distribution and morphology of arsenic during coal combustion. Thus, an arsenic volatilization model based on the AFT, coal type, and combustion temperature during coal combustion was developed. To test the accuracy of the model, blending coal combustion experiments were carried out. The experimental results and published data proved that the developed arsenic volatilization model can accurately predict arsenic emission during co-combustion, and the errors of the predicted value for bituminous and lignite were 2.3–9.8%, with the exception of JingLong (JL) coal when combusted at 1500 °C.

Enrichment of Li–Ga–Zr–Hf and Se–Mo–Cr–V–As–Pb Assemblages in the No. 11 Superhigh Organic Sulfur Coal from the Sangshuping Coal Mine, Weibei Coalfield, Shaanxi, North China

Superhigh organic sulfur(SHOS) coals have currently attracted great attention due to their typical depositional environments and formation history as well as their great negative impact on the ecosystem. This study investigated the geochemistry of the No. 11coalof the Late Carboniferous Taiyuan Formation from the Sangshuping coalmine, Hancheng miningarea, Weibei coalfield, Shaanxi, North China. The No. 11 coal is a high-sulfur coal with a large proportion of organic sulfur content (3.7 to 5.5%, avg. 4.4%) and belongs to typical SHOS coal. The high sulfur content in the Sangshuping coal mine has been mainly caused by the combined influences of seawater and hydrothermal fluids. The SHOS in No. 11 coal was formed in the Fe-poor and S-rich high-marine influenced occlusive environment. During the late coalification stage, a high proportion of pyritic sulfur was formed due to sufficient Fe supply from the Fe–S-rich epigenetic hydrothermal fluids. The No. 11 SHOS coal is enriched in Li–Ga–Zr–Hf and Se–Mo–Cr–V–As–Pb element assemblages. The sediment provenance of the Sangshuping coal mine is predominantly felsic–intermediate rocks from both the Yinshan and Qinling Oldland. However, the elevated concentrations of critical elements (Li, Ga, Zr, and Hf) in the No. 11 coal are primarily inherited from the Yinshan Oldland. The enrichment of the Se–Mo–Cr–V–As–Pb assemblage in No. 11 coal can be ascribed to the influence of both seawater and epigenetic hydrothermal activity.

Exposure assessment of emissions from mobile food carts on New York City streets

Food carts are common along streets in cities throughout the world. In North America, food cart vendors generally use propane, charcoal, or both propane and charcoal (P and C) for food preparation. Although cooking emissions are known to be a major source of indoor air pollution, there is limited knowledge on outdoor cooking's impact on the ambient environment and, in particular, the relative contribution of the different cooking fuels. This field study investigated the air pollution the public is exposed to in the micro-environment around 19 food carts classified into 3 groups: propane, charcoal, and P and C carts. Concentrations near the food carts were measured using both real-time and filter-based methods. Mean real-time concentrations of PM2.5, BC2.5, and particle counts were highest near the charcoal food carts: 196 μg/m3, 5.49 μg/m3, and 69,000 particles/cm3, respectively, with peak exposures of 1520 μg/m3, 67.9 μg/m3, and 235,000 particles/cm3, respectively. In order of pollution emission impacts: charcoal > P and C > propane carts. Thus, significant differences in air pollution emissions occurred in the vicinity of mobile food carts, depending on the fuel used in food preparation. Local air pollution polices should consider these emission factors in regulating food cart vendor operations.

GBE attenuates arsenite-induced hepatotoxicity by regulating E2F1-autophagy-E2F7a pathway and restoring lysosomal activity

Arsenic is an environmental toxicant. Its overdose can cause liver damage. Autophagy has been reported to be involved in arsenite (iAs³⁺ ) cytotoxicity and plays a dual role in cell proliferation and cell death. However, the effect and molecular regulative mechanisms of iAs³⁺ on autophagy in hepatocytes remains largely unknown. Here, we found that iAs³⁺ exposure lead to hepatotoxicity by inducing autophagosome and autolysosome accumulation. On the one hand, iAs³⁺ promoted autophagosome synthesis by inhibiting E2F1/mTOR pathway in L-02 human hepatocytes. On the other, iAs³⁺ blocked autophagosome degradation partially via suppressing the expression of INPP5E and Rab7 as well as impairing lysosomal activity. More importantly, autophagosome and autolysosome accumulation induced by iAs³⁺ increased the protein level of E2F7a, which could further inhibit cell viability and induce apoptosis of L-02 cells. The treatment of Ginkgo biloba extract (GBE) effectively reduced autophagosome and autolysosome accumulation and thus alleviated iAs³⁺ -induced hepatotoxicity. Moreover, GBE could also protect lysosomal activity, promote the phosphorylation level of E2F1 (Ser364 and Thr433) and Rb (Ser780) as well as suppress the protein level of E2F7a in iAs³⁺ -treated L-02 cells. Taken together, our data suggested that autophagosome and autophagolysosome accumulation play a critical role for iAs³⁺ -induced hepatotoxicity, and GBE is a promising candidate for intervening iAs³⁺ induced liver damage by regulating E2F1-autophagy-E2F7a pathway and restoring lysosomal activity.

Concentrations, Spatial Distributions, and Sources of Heavy Metals in Surface Soils of the Coal Mining City Wuhai, China

Various studies have shown that soils surrounding mining areas are seriously polluted by heavy metals. In this study, 58 topsoil samples were systematically collected throughout the coal mining city Wuhai, located within the Inner Mongolia Autonomous Region of China. The concentrations of As, Hg, Cr, Ni, Cu, Zn, Cd, and Pb in these samples were measured and statistically analyzed. The mean concentrations of all heavy metals were lower than their Grade I values defined by the Chinese Soil Quality Standard. However, the mean concentrations of individual heavy metals in many samples exceeded their background values. The spatial distribution of heavy metals was analyzed by the ordinary kriging interpolation method. The positive matrix factorization model was used to ascertain contamination sources of the eight heavy metals and to apportion the contribution of each source. The most severely polluted area was the Wuhushan mine site in the Wuda district of Wuhai. Our results showed that coal mining strongly affected heavy metal contamination of the local soils. Results of source apportionment indicated that contributions from industrial activities, atmospheric deposition, agricultural activities, and natural sources were 31.3%, 26.3%, 21.9%, and 20.5%, respectively. This clearly demonstrates that anthropogenic activities have markedly higher contribution rates than natural sources to heavy metal pollution in soils in this area.

Emission control strategies of hazardous trace elements from coal-fired power plants in China

China's energy dependents on coal due to the abundance and low cost of coal. Coal provides a secure and stable energy source in China. Over-dependence on coal results in the emission of Hazardous Trace Elements (HTEs) including selenium (Se), mercury (Hg), lead (Pb), arsenic (As), etc., from Coal-Fired Power Plants (CFPPs), which are the major toxic air pollutants causing widespread concern. For this reason, it is essential to provide a succinct analysis of the main HTEs emission control techniques while concurrently identifying the research prospects framework and specifying future research directions. The study herein reviews various techniques applied in China for the selected HTEs emission control, including the technical, institutional, policy, and regulatory aspects. The specific areas covered in this study include health effects, future coal production and consumption, the current situation of HTEs in Chinese coal, the chemistry of selected HTEs, control techniques, policies, and action plans safeguarding the emission control. The review emphasizes the fact that China must establish and promote efficient and clean ways to utilize coal in order to realize sustainable development. The principal conclusion is that cleaning coal technologies and fuel substitution should be great potential HTEs control technologies in China. Future research should focus on the simultaneous removal of HTEs, PM, SOx, and NOx in the complex flue gas.

Arsenic and arsenic speciation in mushrooms from China: A review

Arsenic (As) is a natural environmental contaminant to which humans are usually exposed in water, air, soil, and food. China is a typical high-As region, and also a great contributor of the world production of cultivated edible mushrooms and a region abundant in wild growing edible mushrooms. Mushrooms can accumulate different amounts of As and different As compounds, so potential health risk of As intake may exist to people who use mushrooms with elevated As contents as food or medicine. A systematic literature search was carried out for studies on As and As compounds in mushrooms from China. We compiled existing data from published sources in English or Chinese and provide an updated review of the findings on As in mushrooms associated with environments and health risks. Future perspectives for studies on As in mushrooms have also been discussed.

In-Furnace Control of Arsenic Vapor Emissions Using Kaolinite during Low-Rank Coal Combustion: Influence of Gaseous Sodium Compounds

Using additives in the in-furnace control of arsenic emissions is promising for reducing the impact on the downstream selective catalytic reduction system and blocking the spread of arsenic pollutants into the environment. The study quantifies the arsenic adsorption capacity of kaolinite at high temperature and clarifies its fixation pathway with and without the existence of sodium vapor, which is easily adsorbed by kaolinite. Experiments about Al-coordination and acid sites of products, as well as calculations of thermodynamic equilibrium and the adsorption energy based on density functional theory were performed. During separated arsenic adsorption, nearly 40% of trivalent arsenic [As(III)] is oxidized to pentavalent arsenic [As(V)] and bonded to kaolinite, forming an As-O-Al structure. In this respect, the arsenic adsorption capacity of kaolinite is 200 μg g^-1, with 24% of arsenic shown to be well-crystallized Al-bound. During the co-adsorption process, 82% of As(III) is oxidized to As(V) and connected to the Al surface of kaolinite, and the O-Na groups bond to As around the As-O-Al structure, thereby forming Na-O-As-O-Al. The arsenic adsorption capacity increased to 878 μg g^-1 with well-crystallized Al-bound arsenic accounting for 56%. This study demonstrates the potential for the application of kaolinite as an arsenic adsorbent in the actual furnace.

Alterations of arsenic levels in arsenicosis residents and awareness of its risk factors: A population-based 20-year follow-up study in a unique coal-borne arsenicosis County in Guizhou, China

BACKGROUND

Currently, most arsenic (As) studies in populations are concerned with water-borne arsenicosis. However, residents in Xingren County of Guizhou Province, Southwest of China, represent a unique case of arsenicosis which is related to indoor combustion of high As-containing coal. This study aimed to assess the alterations of As levels and its risk factors in coal-borne arsenicosis residents during the past 20 years.

METHODS

Four follow-up investigations in Xingren County were selected from the year 1998 to 2017, a total of 245, 272, 584, and 309 residents were involved in the four investigations, respectively. Local external environmental medium (coal, soil, water, air, rice, corn and chili peppers) and biological samples (urine, hair) were collected at each time of investigation for total As analysis. Sociodemographics and lifestyles variables were extracted from the questionnaire investigation. Both univariate and multivariate unconditional logistic regression models were performed to analyze the variation of risk factors for coal-borne arsenicosis.

RESULTS

A substantial reduction of total As levels was observed both in external environmental medium and biological samples in the unique coal-borne arsenicosis region, especially since the year 2006. In addition, age, duration of consuming high As-containing coal and smoking status were found to be the most significant risk factors for coal-borne arsenicosis during the past 20 years by both two different logistic regression models. Room ventilation and grain drying modes were no longer to be risk factors since 1998 survey. Annual household income had always been an important protective factor for coal-borne arsenicosis in recent 20 years by both two different logistic regression models. Grain storage modes had become significant protective factor in 2014 and 2017 survey. A certain correlation between sex, education and coal-borne arsenicosis was observed by univariate logistic regression model but no clear links were found by multivariate logistic regression model.

CONCLUSIONS

Considerable efforts to blocking As exposure from burning coal and As contaminated foods in this region are observed over the study period. Further practical health education programs may need to target individuals with long-term of As exposure, lower socioeconomic status and smoking in order to better prevent and control the occurrence and development of coal-borne arsenicosis.

Numerical simulation and exploration of electrocoagulation process for arsenic and antimony removal: Electric field, flow field, and mass transfer studies

In order to intuitively and clearly evaluate the potential and current distribution, the fluid flow and mixing, as well as mass transfer involved in electrocoagulation process for As and Sb removal, numerical simulation of electric field, flow field and mass transfer were constructed by Comsol Multiphysics and verified by experiments. Results displayed that the primary current and potential distribution were improved by changing electrode distance or adding insulator in a batch reactor. When configuration 2 and 2 cm electrode distance were applied, a more uniform primary current distribution and higher electrode current efficiency were obtained. In a continuous flow reactor, the increase of flow rate resulted in the left shift of the peak in residence time distribution curve, gradual decrease of the tailing area, reduction of the stagnation zone, and more uniform mixing of the fluid. However, higher than 0.043 L/min was unfavorable to the formation of flocs and its effective combination with pollutants. According to the simulation of mass transfer, at the initial stage, the rate of electrolysis/hydrolysis was greater than that of mass transfer. Fe²⁺, OH^-, and Fe(OH)₂ were primarily concentrated on the anode, cathode, and between the two electrodes, respectively. Under the action of electromigration, diffusion and convection, the concentration distribution of Fe(OH)₂ increased at the direction of streamline. The concentration of Fe²⁺ and OH^- achieved the minimum value at the outlet. However, Fe(OH)⁺ concentration and distribution were hardly affected by the treatment time, and once generated, immediately proceed to the next hydrolysis reaction.

Risk assessment model for different foodstuff drying methods via AHP-FCE method: A case study of "coal-burning" fluorosis area of Yunan and Guizhou Province, China

Fluorosis is still a serious public health problem in China according to our field investigation. Current foodstuff drying methods were studied to evaluate the state of foodstuff contamination, including burning mixed coal (MC)/coal washing wastes (CWWs)/lump coal (LC)/fuelwood/fine coal + fixing materials (FCFM)/CWWs + fixing materials (CFM) in open stove (OS), honeycomb briquettes (HB) in improved stove (IS), sun-drying. The results demonstrate that elemental contents of F, As, Cd, Cr and Pb in roasted grain were 1.19-40.65 times higher than limting standard. The comprehensive risk of different drying methods based on AHP-FCE is ranked in the order of: CWWs(OS) > MC(OS) > HB(IS) > CFM(OS) > FCFM(OS) > LC(OS) > Fuelwood(OS) > sun-drying. It exhibits obviously higher risk due to burning CWWs/MC in OS than other methods. Burning CFM/FCFM/fuelwood in OS may be an economic and relatively safe foodstuff drying methods.

In vitro inhalation/ingestion bioaccessibility, health risks, and source appointment of airborne particle-bound elements trapped in room air conditioner filters

The airborne particle-bound elements (Ca, Fe, Al, Mg, K, Na, Zn, Mn, P, Pb, Cu, Sr, Ti, Ba, Cr, Ni, As, Sb, Cd, Co, and V) trapped in room air conditioners' filters (filter dusts) during recirculating indoor air from different types of rooms were analyzed, and the objectives of this study were to assess the potential sources of those elements and their potential health risks via inhalation/ingestion exposure. Main crustal elements such as Ca, Fe, Al, Mg, and K with an average value of 60.6, 17.9, 11.3, 7.58, and 6.90 mg g^-1, respectively, are the preponderant elements, and the mean values of main toxic elements were 2230, 344, 508, 85.7, 71.5, 36.0, 8.02, and 16.9 mg kg^-1 for Zn, Cu, Pb, Cr, Ni, As, Cd, and Sb, respectively. The enrichment factors indicated the significant enrichment of Cd, Pb, Cr, Cu, Sb, and Zn in the filter dusts. Four potential sources with the contributions of 33.5, 29.1, 22.6, and 14.8%, respectively, were identified by absolute principal component scores-multiple linear regression analysis (APCS-MLR). Enrichment factor and APCS-MLR model reveal the outdoor input of toxic elements. In vitro inhalation and ingestion bioaccessibility of toxic elements showed elemental and in vitro procedure dependence. There are potential carcinogenic risks via ingestion exposure and no non-carcinogenic risks to both children and adults based on bioaccessible contents of toxic elements. This study reveals the potential health risks posed by the particle-bound elements.

Thermal effects on arsenic emissions during coal combustion process

In this study, the rate of emission of arsenic during the burning process of different kinds of coal is examined in order to study the volatile characteristics of arsenic during coal combustion which have negative effects on the ecological environment and human health. The results show that the emission rate of arsenic gradually increases with increased burning temperature, with a threshold of approximately 700°C to 800°C in the process of temperature increase. Then, the relationships among the arsenic emission rate and combustion environment, original arsenic content, combustion time, burning temperature, air flow and amount of arsenic fixing agent are discussed, and it is found that except for the original arsenic content, the rest of the factors have a nonlinear relationship with the emission rate of arsenic. That is, up to a certain level, they all contribute to the release of arsenic, and then their impact is minimal. The original arsenic content in coal is proportional to the arsenic emission rate. Therefore, taking into consideration the nonlinear relationships between factors that affect the arsenic emission rate can reduce contamination from arsenic.

Arsenic and its compounds in mushrooms: A review

The purpose of this article is to review the detail concentration of arsenic in some species of mushrooms as well as organic and inorganic forms of arsenic in the substrates where wild and cultivated edible mushrooms grow. We also briefly review the molecular forms of arsenic in mushrooms. There is still a lack of experimental data from the environment for a variety of species from different habitats and for different levels of geogenic arsenic in soil. This information will be useful for mushrooms consumers, nutritionists, and food regulatory agencies by describing ways to minimize arsenic content in edible mushrooms and arsenic intake from mushroom meals.

Long-term trends of chemical characteristics and sources of fine particle in Foshan City, Pearl River Delta: 2008-2014

Foshan is a major international ceramic center and the most polluted city in the Pearl River Delta (PRD). Here we present the results of the first long-term PM2.5 (particles <2.5μm) sampling and chemical characterization study of the city. A total of 2774 samples were collected at six sites from 2008 to 2014, and analyzed for water soluble species, elements and carbonaceous species. The major constituents of PM2.5 were sulfate, OC (Organic Carbon), nitrate, ammonium and EC (Elemental Carbon), which accounted for 50%-88% of PM2.5. PM2.5 and the most abundant chemical species decreased from 2008 to 2011, but rebounded in 2012-2013. After 2008, the chemical composition of PM2.5 changed dramatically due to the implementation of pollution control measures. From 2008 to 2011, SO4(2-) and NO3(-) were the two largest components; subsequently, however, OC was the largest component. The respective contributions of SO4(2-), NO3(-) and OC to the sum of water soluble species and carbonaceous species were 30.5%, 22.9% and 19.9% in 2008; and 20.2%, 16.5% and 30.2% in 2014. Distinct differences in nitrate and sulfate, and in mass ratio [NO3(-)]/[SO4(2-)] imply that mobile sources tended to more important in Foshan during 2012-2014. The results indicate that pollution control measures implemented during 2008-2014 had a large effect on anthropogenic elements (Pb, As, Cd, Zn and Cu) and water soluble species, but little influence on crustal elements (V, Mn, Ti, Ba and Fe) and carbonaceous species. The PMF method was used for source apportionment of PM2.5. Industry (including the ceramic industry and coal combustion), vehicles and dust were the three most important sources and comprised 39.2%, 20.0% and 18.4% of PM2.5 in 2008, respectively. However, secondary aerosols, vehicles and industry were the three most important sources and comprised 29.5%, 22.4% and 20.4% of PM2.5 in 2014, respectively. During the seven year study interval, the contributions of primary sources (industry and dust) decreased significantly, but secondary sources increased dramatically. Industry, dust and vehicles contributed 36.6μgm(-3), 13.9μgm(-3), and 9.2μgm(-3) to the reduction of PM2.5, respectively.

The History, Status, Gaps, and Future Directions of Neurotoxicology in China

BACKGROUND

Rapid economic development in China has produced serious ecological, environmental, and health problems. Neurotoxicity has been recognized as a major public health problem. The Chinese government, research institutes, and scientists conducted extensive studies concerning the source, characteristics, and mechanisms of neurotoxicants.

OBJECTIVES

This paper presents, for the first time, a comprehensive history and review of major sources of neurotoxicants, national bodies/legislation engaged, and major neurotoxicology research in China.

METHODS

Peer-reviewed research and pollution studies by Chinese scientists from 1991 to 2015 were examined. PubMed, Web of Science and Chinese National Knowledge Infrastructure (CNKI) were the major search tools.

RESULTS

The central problem is an increased exposure to neurotoxicants from air and water, food contamination, e-waste recycling, and manufacturing of household products. China formulated an institutional framework and standards system for management of major neurotoxicants. Basic and applied research was initiated, and international cooperation was achieved. The annual number of peer-reviewed neurotoxicology papers from Chinese authors increased almost 30-fold since 2001.

CONCLUSIONS

Despite extensive efforts, neurotoxicity remains a significant public health problem. This provides great challenges and opportunities. We identified 10 significant areas that require major educational, environmental, governmental, and research efforts, as well as attention to public awareness. For example, there is a need to increase efforts to utilize new in vivo and in vitro models, determine the potential neurotoxicity and mechanisms involved in newly emerging pollutants, and examine the effects and mechanisms of mixtures. In the future, we anticipate working with scientists worldwide to accomplish these goals and eliminate, prevent and treat neurotoxicity.

CITATION

Cai T, Luo W, Ruan D, Wu YJ, Fox DA, Chen J. 2016. The history, status, gaps, and future directions of neurotoxicology in China. Environ Health Perspect 124:722-732; http://dx.doi.org/10.1289/ehp.1409566.

Behaviour, development and metal accumulation in striped marsh frog tadpoles (Limnodynastes peronii) exposed to coal mine wastewater

Coal mining generates large quantities of complex effluent, and this often contains high levels of dissolved solids, suspended solids, metals, hydrocarbons, salts and other compounds. Substantial volumes of mine wastewater are periodically discharged into the environment, through both planned and accidental releases, and this raises concerns about the potential for adverse impacts on aquatic wildlife. There have been few attempts to explore sub-lethal effects of coal mine wastewater on amphibians compared to other organisms, and this is particularly true for Australian species. To address existing knowledge gaps, we exposed striped marsh frog (Limnodynastes peronii) tadpoles to 25, 50 and 100% coal mine wastewater collected from two holding dams (CMW1 and CMW2) located at an open cut mine in Central Queensland, Australia. The exposure lasted for four weeks, after which survival, growth and development, swimming behaviour, and concentrations of metals and metalloids in tail and liver tissues were assessed. Physico-chemical parameters varied considerably between sites, with higher turbidity, nutrients, total and dissolved organic carbon, alkalinity and arsenic (As) concentrations at CMW1, and higher conductivity, salinity, dissolved solids, hardness and sulfate levels at CMW2. There was no mortality in controls and less than 5% mortality in CMW1 treatments, whereas survival was significantly decreased in tadpoles exposed to CMW2 with 40 and 55% mortality in the 50 and 100% treatments, respectively. Development was significantly delayed in 100% CMW1 wastewater, but tadpole size (growth) was not influenced by the exposure. Hepatosomatic indices were significantly increased in tadpoles exposed to 25 and 50% CMW1 but not the 100% treatment group. Exposed tadpoles (predominantly those exposed to CMW1) exhibited increased activity after very short-term exposure (24h), but this did not persist as animals approached metamorphic climax. At the end of the experiment, tadpoles exposed to both wastewaters had elevated levels of selenium (Se), cobalt (Co) and As in tail and liver tissue compared to controls. Manganese (Mn) levels were also elevated in livers and tails of CMW2 exposed tadpoles. Hepatic tissue accumulated 8-9 times higher concentrations of Co, Mn and Se compared to tail tissue, irrespective of treatments. Future research is warranted to explore possible relationships between metal bioaccumulation, morpho-physiological effects during development, and subsequent higher-level outcomes related to individual performance and population fitness.

Geochemistry of tin (Sn) in Chinese coals

Based on 1625 data collected from the published literature, the geochemistry of tin (Sn) in Chinese coals, including the abundance, distribution, modes of occurrence, genetic types and combustion behavior, was discussed to make a better understanding. Our statistic showed the average Sn of Chinese coal was 3.38 mg/kg, almost two times higher than the world. Among all the samples collected, Guangxi coals occupied an extremely high Sn enrichment (10.46 mg/kg), making sharp contrast to Xinjiang coals (0.49 mg/kg). Two modes of occurrence of Sn in Chinese coals were found, including sulfide-bounded Sn and clay-bounded Sn. In some coalfields, such as Liupanshui, Huayingshan and Haerwusu, a response between REEs distribution and Sn content was found which may caused by the transportation of Sn including clay minerals between coal seams. According to the responses reflecting on REEs patterns of each coalfield, several genetic types of Sn in coalfields were discussed. The enrichment of Sn in Guangxi coals probably caused by Sn-rich source rocks and multiple-stage hydrothermal fluids. The enriched Sn in western Guizhou coals was probably caused by volcanic ashes and sulfide-fixing mechanism. The depletion of Sn in Shengli coalfield, Inner Mongolia, may attribute to hardly terrigenous input and fluids erosion. As a relative easily volatilized element, the Sn-containing combustion by-products tended to be absorbed on the fine particles of fly ash. In 2012, the emission flux of Sn by Chinese coal combustion was estimated to be 0.90 × 10(9) g.

Estimate of sulfur, arsenic, mercury, fluorine emissions due to spontaneous combustion of coal gangue: An important part of Chinese emission inventories

A rough estimate of the annual amount of sulfur, arsenic, mercury and fluoride emission from spontaneous combustion of coal gangue in China was determined. The weighted mean concentrations of S, As, Hg, and F in coal gangue are 1.01%, 7.98, 0.18, and 365.54 mg/kg, respectively. Amounts of S, As, Hg, and F emissions from coal gangue spontaneous combustion show approximately 1.13 Mt, and 246, 45, and 63,298 tons in 2013, respectively. The atmospheric release amount of sulfur from coal gangue is more than one tenth of this from coal combustion, and the amounts of As, Hg, and F are close to or even exceed those from coal combustion. China's coal gangue production growth from 1992 to 2013 show an obvious growth since 2002. It may indicate that Chinese coal gangue has become a potential source of air pollution, which should be included in emission inventories.

A global perspective on the influence of environmental exposures on the nervous system

Economic transitions in the era of globalization warrant a fresh look at the neurological risks associated with environmental change. These are driven by industrial expansion, transfer and mobility of goods, climate change and population growth. In these contexts, risk of infectious and non-infectious diseases are shared across geographical boundaries. In low- and middle-income countries, the risk of environmentally mediated brain disease is augmented several fold by lack of infrastructure, poor health and safety regulations, and limited measures for environmental protection. Neurological disorders may occur as a result of direct exposure to chemical and/or non-chemical stressors, including but not limited to, ultrafine particulate matters. Individual susceptibilities to exposure-related diseases are modified by genetic, epigenetic and metagenomic factors. The existence of several uniquely exposed populations, including those in the areas surrounding the Niger Delta or north western Amazon oil operations; those working in poorly regulated environments, such as artisanal mining industries; or those, mostly in sub-Saharan Africa, relying on cassava as a staple food, offers invaluable opportunities to advance the current understanding of brain responses to environmental challenges. Increased awareness of the brain disorders that are prevalent in low- and middle-income countries and investments in capacity for further environmental health-related research are positive steps towards improving human health.

Chemical and toxicological characterization of sediments along a Colombian shoreline impacted by coal export terminals

Extraction, transport and utilization of coal spread out coal dust. Nowadays, Colombia is an important producer of this mineral in South America, being the Santa Marta area one of the largest coal exporting ports in the country. The aim of this work was to assess the pollutants levels and toxicity of shoreline sediments from this place. 16 PAHs and 46 elements were measured in nine locations during dry and rainy seasons. HepG2 cells were exposed to 1% sediment extracts and mRNA expression evaluated for selected genes. PAHs levels were greater during the rainy season. The highest ∑PAHs (89.9 ng g(-1)) appeared at a site located around 300 m far from the coast line at close proximity to the area where coal is loaded into cargo vessels for international shipments, being naphthalene the most abundant PAH. At Santa Marta Bay port, ∑PAHs were 62.8 ng g(-1) and 72.8 ng g(-1) for dry and rainy seasons, respectively, with greatest levels for fluoranthene. Based on sediment standards, most stations have poor condition regarding Cr, but moderate contamination on Cu, Pb and Zn. Sediments from the port and coal transport sites, the most polluted by PAHs and metals, induced CYP1A1 and NQO1 during the dry season. Data showed the sediments from this shoreline have bioactive chemicals that determine their toxicological profile.

Impact of human activity and natural processes on groundwater arsenic in an urbanized area (South China) using multivariate statistical techniques

Anthropogenic factors resulted from the urbanization may affect the groundwater As in urbanized areas. Groundwater samples from the Guangzhou city (South China) were collected for As and other parameter analysis, in order to assess the impact of urbanization and natural processes on As distribution in aquifers. Nearly 25.5 % of groundwater samples were above the WHO drinking water standard for As, and the As concentrations in the granular aquifer (GA) were generally far higher than that in the fractured bedrock aquifer (FBA). Samples were classified into four clusters by using hierarchical cluster analysis. Cluster 1 is mainly located in the FBA and controlled by natural processes. Anthropogenic pollution resulted from the urbanization is responsible for high As concentrations identified in cluster 2. Clusters 3 and 4 are mainly located in the GA and controlled by both natural processes and anthropogenic factors. Three main mechanisms control the source and mobilization of groundwater As in the study area. Firstly, the interaction of water and calcareous rocks appears to be responsible for As release in the FBA. Secondly, reduction of Fe/Mn oxyhydroxides and decomposition of organic matter are probably responsible for high As concentrations in the GA. Thirdly, during the process of urbanization, the infiltration of wastewater/leachate with a high As content is likely to be the main source for groundwater As, while NO3 (-) contamination diminishes groundwater As.

Source of atmospheric heavy metals in winter in Foshan, China

Foshan is a ceramics manufacturing center in the world and the most polluted city in the Pearl River Delta (PRD) in southern China measured by the levels of atmospheric heavy metals. PM2.5 samples were collected in Foshan in winter 2008. Among the 22 elements and ions analyzed, 7 heavy metals (Zn, V, Mn, Cu, As, Cd and Pb) were studied in depth for their levels, spatiotemporal variations and sources. The ambient concentrations of the heavy metals were much higher than the reported average concentrations in China. The levels of Pb (675.7 ± 378.5 ng/m(3)), As (76.6 ± 49.1 ng/m(3)) and Cd (42.6 ± 45.2 ng/m(3)) exceeded the reference values of NAAQS (GB3095-2012) and the health guidelines of the World Health Organization. Generally, the levels of atmospheric heavy metals showed spatial distribution as: downtown site (CC, Chancheng District)>urban sites (NH and SD, Nanhai and Shunde Districts)>rural site (SS, Shanshui District). Two sources of heavy metals, the ceramic and aluminum industries, were identified during the sampling period. The large number of ceramic manufactures was responsible for the high levels of atmospheric Zn, Pb and As in Chancheng District. Transport from an aluminum industry park under light north-west winds contributed high levels of Cd to the SS site (Shanshui District). The average concentration of Cd under north-west wind was 220 ng/m(3), 20.5 times higher than those under other wind directions. The high daily maximum enrichment factors (EFs) of Cd, Pb, Zn, As and Cu at all four sites indicated extremely high contamination by local emissions. Back trajectory analysis showed that the heavy metals were also closely associated with the pathway of air mass. A positive matrix factorization (PMF) method was applied to determine the source apportionment of these heavy metals. Five factors (industry including the ceramic industry and coal combustion, vehicle emissions, dust, transportation and sea salt) were identified and industry was the most important source of atmospheric heavy metals. The present paper suggests a control policy on the four heavy metals Cd, Pb, Zn, and Cu, and suggests the inclusion of As in the ceramic industry emission standard in the future.