Coking wastewater treatment plant as a source of polycyclic aromatic hydrocarbons (PAHs) to the atmosphere and health-risk assessment for workers

Spatial distribution, driving factors and health risks of fine particle-bound polycyclic aromatic hydrocarbons (PAHs) from indoors and outdoors in Hefei, China

Atmospheric particulate matter, especially in urban and industrial environments, can act as a source of different organic pollutants that can pose significant health impacts to residents. However, the pollution status and transport mechanisms of fine particle-bound polycyclic aromatic hydrocarbons (PAHs) in indoor and outdoor environments are uncertain. This study aimed to determine the spatial distribution and morphological characteristics of fine particle-bound PAHs and analyze the factors (source contributions and backward trajectories) that influence their concentrations. The results showed that mean concentrations of 16 PAHs were higher in indoor dust as compared to outdoor dust. In addition, the lowest concentrations of the 16 PAHs were found on the 11-20th floor, with smoking households > nonsmoking households (except Nap, Acy, and Ace). The 2-3 ring PAHs were more prominent in households with cooking activities. The particle size distribution showed that most of the particles were <62 μm in diameter, indicating that the indoor particles were smaller in size. Furthermore, the range of δ13C values in the outdoor dust (-30.17 ~ -28.63 ‰) samples was significantly lower than in indoor dust (-28.29 ~ -22.53 ‰). The results based on diagnostic ratios, positive matrix factorization (PMF) analysis and backward trajectory model analysis suggested that the sources of PAHs in indoor and outdoor dust were mixed, originated both locally and from neighboring provinces transported over long distances, especially concentrated in the Yangtze River Delta area. Finally, carcinogenic risk values for indoor dust were greater than those for outdoor dust. Therefore, it is recommended that local governments and industries with high PAH emissions should implement proper protocols to monitor and minimize the pollution levels of PAHs in the urban industrial environment in order to mitigate their health risks.

New insight into human health risk from polycyclic aromatic hydrocarbons on surfaces of buildings and facilities for industrial legacy regeneration

Although many industrial heritage sites have been repurposed into attractive landscapes, the contamination and health risks from polycyclic aromatic hydrocarbons (PAHs) on industrial legacy surfaces remain unexplored. We collected 441wiping surface samples from 95 buildings and facilities at Beijing coking plant in China and found that the concentrations of 16 US EPA priority PAHs (∑₁₆PAHs) ranged from ND-982.16 and ND-4262.20 mg/m² on the surfaces of buildings and facilities, respectively. The main source of PAHs was the coking process, and spatial distribution of PAHs was consistent with ∑₁₆PAHs in the soil. The carcinogenic risks of BaP, DBA, BbF, BaA, Ind of the facilities remained as industrial heritage relics, and those of Bap, DBA and BbF in the buildings with commercial uses exceeded the acceptable level (10^-6). The hazard quotient of 9 PAHs was below the acceptable level (1.0). The remedial goals for BaP and DBA (0.11 mg/m²) and BbF, BaA and Ind (1.14 mg/m²) at the facility heritage relics were derived. Similarly, the RGs for the buildings with commercial uses of BaP, DBA and BbF were 0.16, 0.16, and 1.64 mg/m², respectively. Overall, we determined that carcinogenic PAHs on the surfaces of industrial legacy should be regulated for regeneration.

Evolution of biochemical processes in coking wastewater treatment: A combined evaluation of material and energy efficiencies and secondary pollution

The application of advanced biological treatment technology results in improved coking wastewater (CW) effluent quality at lower material and energy input practiced by wastewater treatment plants. In wastewater treatment, the diversity of biological processes combinations affects the variety of microorganisms and biochemical reactions resulting in effluent quality. Four full-scale CW processes, anaerobic-anoxic-oxic (A/A/O), anoxic-oxic-hydrolytic-oxic (A/O/H/O), anoxic-oxic-oxic (A/O/O), and oxic-hydrolytic-oxic (O/H/O) were compared for their consumption of chemicals and energy, emissions of greenhouse gases, and excess sludge production. A new performance indicator combining the above mentioned parameters was proposed to comprehensively evaluate processes in capacity to CW. The O/H/O process showed stable and reliable operation with minimum chemicals cost and the average energy consumption, whereas A/A/O at its good performance in TN removal required a large amount of alkaline chemicals to maintain stability. Besides, a substantial addition of chemicals in A/A/O results in larger average amounts of inorganic sludge. Also, the A/A/O process with a single aerobic unit appeared to be incapable of energy saving when dealing with CW rich in nitrogen and poor in phosphorus. The process with dual aerobic units can achieve more complete carbon and nitrogen removal, which is related to the sequence of biochemical reactions. Diverse sequence combinations can create variation in HRT and DO, whereby contaminants proceed through distinct channels of degradation. In the comparative analysis of CWPIs, it could be seen that O/H/O is the biological treatment process with the least equivalent energy consumption input at present thus exhibiting promising application in CW treatment. The A/O/O and A/O/H/O combinations are good attempts of development; however, more energy-efficient operation modes have to be further investigated.

Investigation of indole biodegradation by Cupriavidus sp. strain IDO with emphases on downstream biotransformation and indigo production

Indole, as a typical N-heterocyclic aromatic pollutant, poses risks to living things; however, indole-biotransformation mechanisms remain under-discussed, especially those related to its downstream biotransformation. Here, we systematically investigated the characteristics of indole degradation by strain Cupriavidus sp. IDO. We found that Cupriavidus sp. IDO could utilize 25 to 150 mg/L indole within 40 h and identified three intermediates (2-oxindole, indigo, and isatin). Additionally, integrated genomics and proteomics analysis of the indole biotransformation mechanism in strain IDO revealed 317 proteins showing significant changes (262 upregulated and 55 downregulated) in the presence of indole. Among these, three clusters containing indole oxidoreductase, CoA-thioester ligase, and gentisate 1,2-oxidoreductase were identified as potentially responsible for upstream and downstream indole metabolism. Moreover, HPLC-MS and -omics analysis offered insight into the indole-degradation pathway in strain IDO. Furthermore, the indole oxidoreductase IndAB, which initiates indole degradation, was heterologously expressed in Escherichia coli BL21(DE3). Optimization by the response surface methodology resulted in a maximal production of 135.0 mg/L indigo by the recombination strains in tryptophan medium. This work enriches our understanding of the indole-biodegradation process and provides new insights into multiple indole-degradation pathways in natural environments.

Facile synthesis of core\shell Fe3O4@mSiO2(Hb) and its application for organic wastewater treatment

Treatment of organic wastewater is a challenging task. Biological techniques using biocatalysts have shown their benefits in organic wastewater treatment. In this research, a novel biocatalyst was developed by encapsulation of Fe3O4 microspheres and haemoglobin (Hb) with mesoporous silica, named Fe3O4@mSiO2(Hb). Fe3O4@mSiO2(Hb) exhibited typical mesoporous characteristics (mesoporous silica), magnetic feature (Fe3O4) and peroxidase activity (Hb). The results showed that the immobilization of Hb into Fe3O4@mSiO2 did not affect its activity. In addition, Fe3O4@mSiO2(Hb) exhibited a higher efficiency in the peroxidation of aromatic compounds than free Hb. The peroxidase activity of the synthesized biocatalyst was estimated to be 120 Ug^-1, which was almost four times greater than that of previously reported immobilized Hb. Also, the Km of Fe₃O₄@mSiO₂(Hb) was similar to that of the free Hb and it was estimated to be 4.3 × 10^-4 μM, indicating that the activity of the Hb in the immobilized enzyme was not affected after immobilization. The immobilized enzyme was also found to be stable, recyclable and reusable. Taken together, these results indicate that the Fe₃O₄@mSiO₂(Hb) has good potential to be used for treating organic wastewater containing aromatic compounds. The magnetically separable novel biocatalyst developed in this study provided not only a more suitable microenvironment for retaining the activity of Hb, but also demonstrated enhanced stability and activity under unfavorable conditions.

Source Apportionment and Toxic Potency of Polycyclic Aromatic Hydrocarbons (PAHs) in the Air of Harbin, a Cold City in Northern China

A total of 68 PUF samples were collected seasonally from 17 sampling sites in Harbin, China from May 2016 to April 2017 for analyzing 15 congeners of gaseous polycyclic aromatic hydrocarbons (Σ15PAHs). An improved non-negative matrix (NMF) model and a positive matrix factorization (PMF) model were used to apportion the sources of PAHs. The carcinogenic risk due to exposure to PAHs was estimated by the toxicity equivalent of BaP (BaPeq). The results showed that the average concentration of Σ15PAHs was 68.3 ± 22.3 ng/m3, and the proportions of 3-ring, 4-ring, 5-ring, and 6-ring PAHs were 64.4%, 32.6%, 2.10%, and 0.89%, respectively. Among the six typical functional areas in Harbin, the Σ15PAHs concentrations were 98.1 ± 76.7 ng/m3, 91.2 ± 76.2 ng/m3, 71.4 ± 75.6 ng/m3, 67.9 ± 65.6 ng/m3, 42.6 ± 34.7 ng/m3, and 38.5 ± 38.0 ng/m3 in the wastewater treatment plant, industrial zone, business district, residential area, school, and suburb, respectively. During the sampling period, the highest concentration of Σ15PAHs was in winter. The improved NMF model and PMF model apportioned the PAHs into three sources including coal combustion, biomass burning, and vehicle exhaust. The contributions of coal combustion, biomass burning, and vehicle exhausts were 34.6 ± 3.22%, 48.6 ± 4.03%, and 16.8 ± 5.06%, respectively. Biomass burning was the largest contributor of Σ15PAHs concentrations in winter and coal combustion contributed significantly to the concentrations in summer. The average ΣBaPeq concentration was 0.54 ± 0.23 ng/m3 during the sampling period, high concentrations occurred in the cold season and low levels presented in the warm period. Vehicle exhaust was the largest contributor to the ΣBaPeq concentration of PAHs in Harbin.

Catalysis and degradation of phenol in coking wastewater during low-rank coal coke gasification

The thermochemical-reaction characteristics of different concentrations of phenol water and gasification-coke at 1000 °C in a thermochemical reactor were experimentally studied.

Selection of optimum biological treatment for coking wastewater using analytic hierarchy process

The design of biological treatment process for the coking wastewater (CW) is complicated since wastewater treatment demand is gradually increasing lacking the systematic strategy in efficiency evaluation and advisable selection. Therefore, this study develops a holistic approach by means of the analytic hierarchy process (AHP) that uses numerical representation to rank the preferences of each participating alternatives for evaluation of the advanced biological technologies in CW treatment. Based on survey results, six types reactor combinations were selected as the alternatives, which were further classified as two group according to COD load. The AHP methodology consists of weighting and ranking procedures considering technical, economic, environmental and administration factors defined as criteria layers. Eighteen indicators were chosen as sub-criteria layers. Inclusively beneficial and sustainable biological processes were assessed and ranked along the AHP implementation. The results placed technical indicators to the top position among the criteria layers in the weighting descending order 'technical indicators > economic indicators > environmental indicators > administrative indicators', whereas the weight of indicators in sub-criteria layers fitted in the range of 0.005 to 0.151. The inclusive priority calculation integrating all weight indices of criteria and sub-criteria layers resulted in the anaerobic-anoxic-oxic (A/A/O) combination rising in the hierarchy of the low load group, whereas the oxic-hydrolytic-oxic (O/H/O) process was prioritized in the high load group. The accuracy and objectivity of AHP application was also supported by sensitivity and variability analyses that examines a range for the weights' values and corresponding to alternative scenarios.

Emerging concerns of VOCs and SVOCs in coking wastewater treatment processes: Distribution profile, emission characteristics, and health risk assessment

In this study, the distribution profiles, emission characteristics, and health risks associated with 43 volatile and semi-volatile organic compounds, including 15 phenols, 18 polycyclic aromatic hydrocarbons (PAHs), 6 BTEX, and 4 other compounds, were determined in the wastewater treatment plant (WWTP) of a coking factory (plant C) and the succeeding final WWTP (central WWTP). Total phenols with a concentration of 361,000 μg L^-1 were the predominant compounds in the influent wastewater of plant C, whereas PAHs were the major compounds in the final effluents of both coking WWTPs (84.4 μg L^-1 and 30.7 μg L^-1, respectively). The biological treatment process in plant C removed the majority of volatile organic pollutants (94.1%-99.9%). A mass balance analysis for plant C showed that biodegradation was the main removal pathway for all the target compounds (56.6%-99.9%) except BTEX, chlorinated phenols, and high molecular weight (MW) PAHs. Chlorinated phenols and high MW PAHs were mainly removed via sorption to activated sludge (51.8%-73.2% and 60.2%-75.9%, respectively). Air stripping and volatilization were the dominant mechanisms for removing the BTEX compounds (59.8%-73.8%). The total emission rates of the detected volatile pollutants from plant C and the central WWTP were 1,640 g d^-1 and 784 g d^-1, respectively. Benzene from the equalization basins of plant C and the central WWTP corresponded to the highest inhalation carcinogenic risks (1.4 × 10^-3 and 3.2 × 10^-4, respectively), which exceeded the acceptable level for human health (1 × 10^-6) recommended by the United States Environmental Protection Agency. The results showed that BaP exhibited the highest inhalation non-cancer risk, with a hazard index ratio of 70 and 30 for plant C and the central WWTP, respectively. Moreover, the excess sludge generated during wastewater treatment should also be carefully handled because it adsorbed abundant PAHs and chlorinated phenols at coking plant C (58,000 μg g^-1 and 3,500 μg g^-1) and the central WWTP (622 μg g^-1 and 54 μg g^-1).

Coking wastewater treatment plant as a sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and ecological risk assessment

The spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in sediments of Maba River, a major tributary of Beijiang River (South China). A total of 13 samples from Maba River and its tributary, Meihua River, were analyzed for 16 PAHs. The total concentration of 16 PAHs (ΣPAH) in high and low water period ranged between 47.61 to 25480.98 ng g-1, with a mean concentration of 4382.98 ng g-1, and 60.30 to 15956.62 ng g-1 with a mean concentration of 3664.32 ng g-1, respectively. Three-ring and four-ring PAHs were the dominant species. It was concluded that a pattern of pyrolytic input as a major source of PAHs in sediments through the molecular ratio method for the source identification, such as HMW/LMW PAHs, Flu/(Flu+Pyr), IcdP/(IcdP+BghiP) and BaA/(BaA+Chr). It is suggested that the pollution emission from the iron and steel plant might be the most important sources of PAHs into Maba River water system. The threat of PAHs contamination to biota of the river was assessed using effect range low (ERL) and effect range median (ERM) values, which suggested that PAHs in Maba River and its tributary had already caused ecological risks.

Residual chemical oxygen demand (COD) fractionation in bio-treated coking wastewater integrating solution property characterization

The refractory nature of residual COD in bio-treated coking wastewater (BTCW) creates barriers for its further treatment and reclamation. It is necessary to fractionate the residual COD in BTCW associated with characterization of solution properties. In this paper, a stepwise process composed of membrane filtration, coagulation, adsorption and ozonation was proposed to fractionate residual COD in the BTCW, in which the COD was stepwise reduced to near zero. In addition, the correlation between COD and water quality indexes as well as solution properties were discussed together with a safety assessment of the water quality. Results showed that the residual COD fractionation percentage contributed by suspended solids, colloids, dissolved organics and reductive inorganic substances in the BTCW was 43.7%, 22.1%, 26.2% and 4.9%, respectively. By stepwise fractionating of these substances, the residual COD was reduced from 168.8 to 5.2 mg L^-1, and the UV₂₅₄ value decreased from 1.90 to 0.15 cm^-1. In addition, the particle size of the dominant substances contributing to the residual COD was smaller than 450 nm. Among these substances, the hydrophobic fraction accounted for 78.66% (in the term of TOC). Three-dimensional excitation-emission matrix (3D-EEM) analysis showed that hydrophobic neutral substances (HON) were the main fluorescence constituent in the BTCW, which was highly removable by adsorption. The residual COD after adsorption was mainly composed of reductive inorganic substances. Apart from pursuit of high COD removal rates, more emphasis should be given to the removal of toxic COD. Correlations were observed between the residual COD and water quality indicators as well as solution properties, providing a guideline for optimized removal of residual COD in the BTCW. In summary, these results gave a referential information about the nature of residual COD in the BTCW for the selection of advanced treatment technologies and the management of water quality safety.

Nitrogen removal from coke making wastewater through a pre-denitrification activated sludge process

Under the Industrial Emissions Directive (IED), coke production wastewater must be treated to produce an effluent characterised by a total nitrogen (TN) <50 mg/L. An anoxic-aerobic activated sludge pilot-plant (1 m³) fed with coke production wastewater was used to investigate the optimal operational requirements to achieve such an effluent. The loading rates applied to the pilot-plant varied between 0.198-0.418 kg COD/m³.day and 0.029-0.081 kg TN/m³.day, respectively. The ammonia (NH₄⁺-N) removals were maintained at 96%, after alkalinity addition. Under all conditions, phenol and SCN^- remained stable at 96% and 100%, respectively with both being utilised as carbon sources during denitrification. The obtained results showed that influent soluble chemical oxygen demand (sCOD) to TN ratio of should be maintained at >5.7 to produce an effluent TN <50 mg/L. Furthermore, nitrite accumulation was observed under all conditions indicating a disturbance to the denitrification pathway. Overall, the anoxic-aerobic activated sludge process was shown to be a robust and reliable technology to treat coke making wastewater and achieve the IED requirements. Nevertheless, the influent to the anoxic tank should be monitored to ensure a sCOD:TN ratio >5.7 or, alternately, the addition of an external carbon source should be considered.

Preparing coal slurry from coking wastewater to achieve resource utilization: Slurrying mechanism of coking wastewater-coal slurry

Coking wastewater is used to prepare coal slurry, which can be used as combustion and gasification fuel. This promising technology simultaneously achieves resource utilization and wastewater management. Slurrying properties are essential to the industrial application of coal slurry. These properties are considerably influenced by coal surface properties and the adsorption of an additive by coal. In this study, the effects of the internal components (e.g., phenol, ammonia nitrogen, and metal ions) of coking wastewater on the adsorption of an additive by coal and on coal surface properties were measured. Results showed that the competitive adsorption between phenol and the additive reduced the amount of additive adsorbed on coal. However, phenol acted as an additive to improve the wettability of coal particles. Cations (Ca²⁺, NH₄⁺, and Na⁺) adversely affected the slurrying because they weakened the negative charges of coal. Furthermore, a large amount of water was adsorbed due to the ionic bonding effects, thereby reducing the free water in the coal slurry system. The maximum slurrying concentration of CWCS was 0.8 percentage points higher than that of CWS, suggesting that coking wastewater enhanced the slurrying capability of the coal slurry by integrating the various effects induced by the different internal components.

Assessing pollution and risk of polycyclic aromatic hydrocarbons in sewage sludge from wastewater treatment plants in China's top coal-producing region

Managing and disposing of sewage sludge have been a severe environmental challenge around the world. China produces hundreds of million tons of sewage sludge annually, and a better understanding of the extent and risk of the associated pollution is of critical importance for implementing environmentally safe regulations and practices. The present study examined the quantity, composition, source, and risk of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge from 18 wastewater treatment plants (WWTPs) in Shaanxi, one of China's top coal-producing provinces. The total concentrations of 16 PAHs varied from 778 to 3264 ng/g dry weight, which is below the upper safety limit (5000 ng/g dry weight) set for the disposal of sludge from municipal wastewater treatment plants for agricultural use in China. However, the concentration of individual PAH compound exceeded the acceptable level prescribed by the Netherland Soil Standard. Three-ring PAHs were the most abundant constituent (50% of total PAHs on average), followed by four-ring PAHs averaging 25%. Relative to sludge PAHs in the same region a decade ago, the total concentrations decreased by more than 27% and the composition shifted to a more pronounced dominance by low molecular weight compounds. This compositional shift suggests higher contributions of petrogenic sources, which may reflect China's increasing consumption of petroleum products over the past decade. The flux of sludge PAHs from each WWTP was positively correlated with the corresponding city's GDP and population, and the total flux amounted to over 100 kg each year for WWTPs in the Xi'an city. The mean toxicity equivalent quantity (TEQ) value was more than twice higher than the value recommended by the Netherlands Soil Standard, and seven carcinogenic PAHs were the primary contributor (i.e., 89-99%) of the TEQ. Collectively, our findings demonstrate that sewage sludge PAHs in Shaanxi constitute a significant source of environmental pollution and toxicity, which cautions against the direct discharge and reuse of sewage sludge and further highlights challenges in managing and disposing of the vast quantities of sewage sludge in China.

Sulfate radical oxidation combined with iron flocculation for upgrading biological effluent of coking wastewater

Because the components of the coking wastewater was biologically toxic and hence inhibit the actions of microorganisms in conventional biological treatment processes,the biological effluent of coking wastewater (BECW) still remains much recalcitrant pollutants. In the current work, we set out to explore the feasibility of using a proposed advanced oxidation method, involving the persulfate-activated zero-valent iron system (PS/ZVI), to realize a deep treatment of BECW. The efficiency levels at which sulfate radical oxidation combined with iron flocculation removed pollutants, specifically TOC, phenolic compounds (PCs), cyanide, and suspended solids (SSs), as well as removing colour were investigated in batch tests. Increasing the persulfate concentration generally resulted in improved pollutant removal, with maximum removal efficiency levels of 58.5%, 68.4%, 61% 99.9% and 91.04% for TOC, PCs, SS, cyanide and colour, respectively. Note that the coexisting inorganic ions CO3 2- and HCO3 - were strong competitors of the radical consumption of TOC, but this interference was eliminated by adjusting the pH to 4.5. Also, flocculation of the generated Fe3+ ions from the radical reaction significantly enhanced SS removal. GC-MS analysis showed that the compositional diversity of the BECW decreased after oxidation. Meanwhile its biodegradability increased, indicating less bio-toxicity reaching the natural water body. This study suggests that the PS/ZVI system may be an alternative safer and more efficient method than Fenton's method for carrying out an advanced treatment of coking wastewater.

Single microbial fuel cell reactor for coking wastewater treatment: Simultaneous carbon and nitrogen removal with zero alkaline consumption

The use of several individual reactors for sequential removal of organic compounds and nitrogen, in addition to the required alkaline addition in aerobic reactors, remain outstanding technical challenges to the traditional biological treatment of coking wastewater. Here, we report the utilization of a single microbial fuel cell (MFC) reactor that performs simultaneous carbon and nitrogen removal with zero alkaline consumption, as evidenced by the results of the batch-fed and continuous-flow experiments. The MFC exhibited faster reaction kinetics for COD and total nitrogen (TN) removal than the same configured reactor analogous to the traditional aerobic biological reactor (ABR). At a hydraulic retention time (HRT) of 125 h, the efficiencies of COD and TN removal in the MFC reached 83.8±3.6% and 97.9±2.1%, respectively, much higher than the values of 73.8±2.9% and 50.2±5.0% obtained in the ABR. Furthermore, the degradation in the MFC of the main organic components, including phenolic compounds (such as phenol, 2-methylphenol, 3-methylphenol, 4-methylphenol, and 2,4-dimethlyphenol) and nitrogenous heterocyclic compounds (such as quinolone, pyridine, indole, and isoquinolone) was greater than that in the ABR. The enhancing effect was attributed to the ability of the MFC to self-adjust the pH. It was also manifested by the increased abundances of heterotrophs, nitrifiers, and denitrifiers in the MFC. The correlations between the current density and the rates of COD and TN removal suggest that the extent of the current from the anode to the cathode is a critical parameter for the overall performance of MFCs in the treatment of coking wastewater.

Advanced treatment of biologically treated coking wastewater by persulfate oxidation with magnetic activated carbon composite as a catalyst

Advanced treatment of biologically treated coking wastewater (BTCW) using persulfate (PS) oxidation with magnetic activated carbon composite (CuFe₂O₄:AC w/w ratio of 1:1.5, denoted as 1.5-MACC) as a green catalyst was evaluated at ambient temperature (30 °C). Effects of PS (K₂S₂O₈) and 1.5-MACC doses on PS decomposition and total organic carbon (TOC) removal in BTCW were also studied during 360 min. The results showed that the 1.5-MACC/PS system has a much better performance on TOC removal in BTCW than only 1.5-MACC or PS system. PS decomposition and TOC removal follow first-order kinetics in the 1.5-MACC/PS system. The optimum condition of the 1.5-MACC/PS system to treat BTCW is with a K₂S₂O₈ dose of 4 g L^-1 and 1.5-MACC dose of 5 g L^-1. Under this condition, TOC in the PS oxidation effluent is 20.4 mg L^-1 with a removal efficiency of 85.4%. TOC removal is a synergistic effect of adsorption and oxidation. TOC oxidation is due to the generation of ·SO₄^- via the activation of PS by CuFe₂O₄ impregnated AC. The gas chromatography-mass spectrometry (GC-MS) analysis revealed that phenol compounds and esters were removed significantly by the 1.5-MACC/PS system. When 1.5-MACC was used for the fourth time in the 1.5-MACC/PS system, the removal ratio of TOC was still over 62.2% in 360 min reaction. Thus, the 1.5-MACC/PS system has a potential practical application in treatment of BTCW.

The mineralization of oxalic acid and bio-treated coking wastewater by catalytic ozonation using nickel oxide

Coking wastewater after biological treatment still possesses potential environmental risk and should be mineralized further. This work focused on the mineralization of bio-treated coking wastewater using catalytic ozonation by NiO. First, oxalic acid, the typical by-product of advanced oxidation process (AOPs), was used to test the catalytic performance of NiOs, prepared by modified hydrothermal methods upon addition of different surfactants. This demonstrated that NiO upon addition of hexadecyltrimethylammonium (CTAB) had the best catalytic activity, due to its high concentration surface hydroxyl density and strong stability. Moreover, the best NiO was applied for the catalytic ozonation of bio-treated coking wastewater. Under our experimental conditions, the total organic carbon (TOC) removal reached 100% after 420 min. In addition, the spectroscopic analysis suggested that compounds with conjugated structures could be significantly removed by both ozonation and catalytic ozonation. Some of these substances were transformed into by-products with aliphatic C-C and O=C-O groups such as organic acids that can inhibit further mineralization.

Effects of electron-donating groups on the photocatalytic reaction of MOFs

Regulating the synthesis of photocatalytic materials at the molecular level could affect the absorption of light and guide the synthesis of highly efficient photocatalysts for the photocatalytic degradation organic pollutants.

Disolved organic matter (DOM) removal from bio-treated coking wastewate using a new polymeric adsorbent modified with dimethylamino groups

In the current study a new recyclable aminated hyper-cross-linked polymeric adsorbent (A-HPA) was prepared for effective removal of DOM from BTCW. Possibly benefited from its unique structure of polystyrene matrix, sufficient aminated groups and high specific surface area, A-HPA could remove DOM from BTCW through the synergetic effect of π-π interactions, acid-base interactions and micropore filling, and exhibited the highest removal efficiency than the other adsorbents. Moreover, the exhausted A-HPA was amenable to effective regeneration by using acid and alkaline solution, allowing for repeated use with a constant removal efficiency. Field application of continuous 3-year fixed-bed runs demonstrated that A-HPA is capable of effectively removing DOM from BTCW with no significant capacity loss, and the treated effluent can be partially used as recycled water in production. All the above results demonstrated that A-HPA adsoption could serve as a good choice for the advanced treatment of bio-treated sewage effluent.

Presence, distribution and risk assessment of polycyclic aromatic hydrocarbons in rice-wheat continuous cropping soils close to five industrial parks of Suzhou, China

Polycyclic aromatic hydrocarbons (PAHs) accumulated in agricultural soils are likely to threaten human health and ecosystem though the food chain, therefore, it is worth to pay more attention to soil contamination by PAHs. In this study, the presence, distribution and risk assessment of 16 priority PAHs in rice-wheat continuous cropping soils close to industrial parks of Suzhou were firstly investigated. The concentrations of the total PAHs ranged from 125.99 ng/g to 796.65 ng/g with an average of 352.94 ng/g. Phenanthrene (PHE), fluoranthene (FLT), benzo [a] anthracene (BaA) and pyrene (PYR) were the major PAHs in those soil samples. The highest level of PAHs was detected in the soils around Chemical plant and Steelworks, followed by Printed wire board, Electroplate Factory and Paper mill. The composition of PAHs in the soils around Chemical plant was dominated by 3-ring PAHs, however, the predominant compounds were 4, 5-ring PAHs in the soils around other four factories. Meanwhile, the concentration of the total PAHs in the soils close to the factories showed a higher level of PAHs in November (during rice harvest) than that in June (during wheat harvest). Different with other rings of PAHs, 3-ring PAHs in the soils around Chemical plant and Steelworks had a higher concentration in June. The results of principal component analysis and isomeric ratio analysis suggested that PAHs in the studied areas mainly originated from biomass, coal and petroleum combustion. The risk assessment indicated that higher carcinogenic risk was found in those sites closer to the industrial park.

Removal Efficiency and Risk Assessment of Polycyclic Aromatic Hydrocarbons in a Typical Municipal Wastewater Treatment Facility in Guangzhou, China

The loading and removal efficiency of 16 US EPA polycyclic aromatic hydrocarbons (PAHs) were examined in an inverted A²/O wastewater treatment plant (WWTP) located in an urban area in China. The total PAH concentrations were 554.3 to 723.2 ng/L in the influent and 189.6 to 262.7 ng/L in the effluent. The removal efficiencies of ∑PAHs in the dissolved phase ranged from 63 to 69%, with the highest observed in naphthalene (80% removal). Concentration and distribution of PAHs revealed that the higher molecular weight PAHs became more concentrated with treatment in both the dissolved phase and the dewatered sludge. The sharpest reduction was observed during the pretreatment and the biological phase. Noncarcinogenic risk, carcinogenic risk, and total health risk of PAHs found in the effluent and sewage sludge were also assessed. The effluent BaP toxic equivalent quantities (TEQ_BaP) were above, or far above, standards in countries. The potential toxicities of PAHs in sewage effluent were approximately 10 to 15 times higher than the acceptable risk level in China. The health risk associated with the sewage sludge also exceeded international recommended levels and was mainly contributed from seven carcinogenic PAHs. Given that WWTP effluent is a major PAH contributor to surface water bodies in China and better reduction efficiencies are achievable, the present study highlights the possibility of utilizing WWTPs for restoring water quality in riverine and coastal regions heavily impacted by PAHs contamination.

Identification and determination of the contribution of iron-steel manufacturing industry to sediment-associated polycyclic aromatic hydrocarbons (PAHs) in a large shallow lake of eastern China

Seventeen polycyclic aromatic hydrocarbon (PAH) compounds were determined in surface sediments collected from the Chaohu Lake (a large shallow lake in eastern China) and its tributaries. Both diagnostic ratios and a receptor model (positive matrix factorization, PMF) were applied to identify and determine the contribution of a local iron-steel manufacturing plant located in the Nanfei River (NFR) to the Chaohu Lake basin. The results show that sites located in the downstream of the steel plant contained concentrations of 17 PAH (Σ₁₇PAH) approximately two orders of magnitudes higher than those from other sites. Five factors were identified by the PMF model, including industrial waste, wood/biomass burning, diagenetic origin, domestic coal combustion, and industrial combustion. Our findings suggest that sediments in the downstream of the plant and in the western part of the Chaohu Lake were predominantly affected by industrial coal combustion. A mixture of pyrolytic origins impacted urban sediments in the upstream of the plant, whereas diagenetic origins along with coal and biomass burning were suggested to influence the eastern part and rural tributaries of the lake. To assess the potential ecological risk and toxicity caused by the iron-steel plant, sediment toxicity was evaluated by the PMF model, sediment quality guideline, and toxic equivalent factors. All of the three approaches suggested PAH accumulation in the NFR sediments could produce significant adverse ecological effects and half of the sediment toxicity in the NFR may be attributed to the emissions from the iron-steel plant. Some rural locations also exhibited PAH concentrations above probable effects, most likely contributed by wood/biomass burning.

Selection of oxidant doses for in situ chemical oxidation of soils contaminated by polycyclic aromatic hydrocarbons (PAHs): A review

In situ chemical oxidation (ISCO) is a promising alternative to thermal desorption for the remediation of soils contaminated with organic compounds such as polycyclic aromatic hydrocarbons (PAHs). For field application, one major issue is the selection of the optimal doses of the oxidizing solution, i.e. the oxidant and appropriate catalysts and/or additives. Despite an extensive scientific literature on ISCO, this choice is very difficult because many parameters differ from one study to another. The present review identifies the critical factors that must be taken into account to enable comparison of these various contributions. For example, spiked soils and aged, polluted soils cannot be compared; PAHs freshly spiked into a soil are fully available for degradation unlike a complex mixture of pollutants trapped in a soil for many years. Another notable example is the high diversity of oxidation conditions employed during batch experiments, although these affect the representativeness of the system. Finally, in this review a methodology is also proposed based on a combination of the stoichiometric oxidant demand of the organic pollutants and the design of experiments (DOE) in order to allow a better comparison of the various studies so far reported.

Sources and potential health risk of gas phase PAHs in Hexi Corridor, Northwest China

Gas phase polycyclic aromatic hydrocarbons (PAHs) in Hexi Corridor, Northwest China were determined during heating and non-heating seasons, respectively, using passive air samplers. Polyurethane foam (PUF) disks were chosen as the sampling medium. Fifteen PAHs out of the 16 PAHs classified by the United States Environmental Protection Agency (U.S. EPA) were detected in this field sampling investigation. The atmospheric levels of sampled PAHs were higher at urban sites than that at rural sites among 14 sampling sites and increased during heating season. The highest concentration (11.34 ng m(-3)) was observed in Lanzhou during the heating season, the capital and largest industrial city of Gansu Province. PAH contamination in air was dominated by three aromatic ring congeners. Possible sources of PAHs were apportioned using PAH species ratios and the principle component analysis (PCA) combined with a multiple linear regression (MLR) method. Fossil fuel consumption was identified to be the predominant source of PAHs over Hexi Corridor, accounting for 43 % of the concentration of total (15) PAHs. Backward and forward trajectory and cluster analysis were also carried out to identify potential origins of PAHs monitored at several urban and rural sites. Lung cancer risk of local residents to gas phase PAHs via inhalation exposure throughout the province was found to be around a critical value of the lung cancer risk level at 10(-6) recommended by the U.S. EPA risk assessment guideline.

Biodegradation of indole by a newly isolated Cupriavidus sp. SHE

Indole, a typical nitrogen heterocyclic aromatic pollutant, is extensively spread in industrial wastewater. Microbial degradation has been proven to be a feasible approach to remove indole, whereas the microbial resources are fairly limited. A bacterial strain designated as SHE was isolated and found to be an efficient indole degrader. It was identified as Cupriavidus sp. according to 16S rRNA gene analysis. Strain SHE could utilize indole as the sole carbon source and almost completely degrade 100mg/L of indole within 24hr. It still harbored relatively high indole degradation capacity within pH4-9 and temperature 25°C-35°C. Experiments also showed that some heavy metals such as Mn(2+), Pb(2+) and Co(2+) did not pose severe inhibition on indole degradation. Based on high performance liquid chromatography-mass spectrum analysis, isatin was identified as a minor intermediate during the process of indole biodegradation. A major yellow product with m/z 265.0605 (C15H8N2O3) was generated and accumulated, suggesting a novel indole conversion pathway existed. Genome analysis of strain SHE indicated that there existed a rich set of oxidoreductases, which might be the key reason for the efficient degradation of indole. The robust degradation ability of strain SHE makes it a promising candidate for the treatment of indole containing wastewater.

PAHs in sediment cores at main river estuaries of Chaohu Lake: implication for the change of local anthropogenic activities

In the present study, 28 polycyclic aromatic hydrocarbons (PAHs) were investigated in four sediment cores collected from the main river estuaries of Chaohu Lake, one of the severely polluted lakes in China. The results indicate that elevated concentrations of total PAHs (Σ28PAH) were found in the samples from the estuary of Nanfei River (ENF), considering BaP-based total toxicity equivalent (TEQ-BaP) and toxic unit (TU) results; there are potential adverse environmental implications. The total organic carbon (TOC) played an important role on the accumulation of PAHs at ENF and the estuary of Tongyang River (ETY). The predominant PAHs are high molecular weight (HMW) homologous for all samples; as a result, industrial wastewater from a steel company is expectedly the key source of PAHs in ENF, while coke consumption would be the important source of PAHs at other three sampling sites. Vertical distribution of PAHs in the sediment cores could be explained by the local social and economic activities. Furthermore, a minor variation of PAH composition in the sediment core could be justified by the stable structure of energy consumption in the Anhui Province. These results justify the need for further enhancement of industrial wastewater treatment and development of renewable energies which are the key factors on the control of PAH pollution in China.

Spectroscopic characterization of dissolved organic matter in coking wastewater during bio-treatment: full-scale plant study

This paper taking a full-scale coking wastewater (CWW) treatment plant as a case study aimed to characterize removal behaviors of dissolved organic matter (DOM) by UV spectra and fluorescence excitation-emission matrix-parallel factor analysis (PARAFAC), and investigate the correlations between spectroscopic indices and water quality parameters. Efficient removal rates of chemical oxygen demand (COD), dissolved organic carbon (DOC) and total nitrogen (TN) after the bio-treatment were 91.3%, 87.3% and 69.1%, respectively. UV270 was proven to be a stable UV absorption peak of CWW that could reflect the mixture of phenols, heterocyclics, polynuclear aromatic hydrocarbons and their derivatives. Molecular weight and aromaticity were increased, and also the content of polar functional groups was greatly reduced after bio-treatment. Three fluorescent components were identified by PARAFAC: C1 (tyrosine-like), C2 (tryptophan-like) and C3 (humic-like). The removal rate of protein-like was higher than that of humic-like and C1 was identified as biodegradable substance. Correlation analysis showed UV270 had an excellent correlation with COD (r=0.921, n=60, P<0.01) and DOC (r=0.959, n=60, P<0.01) and significant correlation (r=0.875, n=60, P<0.01) was also found between C2 and TN. Therefore, spectroscopic characterization could provide novel insights into removal behaviors of DOM and potential to monitor water quality real-time during CWW bio-treatment.

Distribution of artificial sweeteners in dust and soil in China and their seasonal variations in the environment of Tianjin

A nationwide investigation on the occurrence of artificial sweeteners (ASs) was conducted by collecting 98 paired outdoor dust and soil samples from mainland China. The ASs were widely detected in Chinese atmospheric dry deposition and soil samples, at concentrations up to 6450 and 1280 ng/g, respectively. To give a picture on AS distribution and source in the whole environment, the concentrations and seasonal variations of ASs in Tianjin were studied, including atmosphere, soil, and water samples. The AS levels were significantly higher in Haihe river at TJW (a sampling site in central city) in winter, while no obviously seasonal trends were obtained at BYL (close to a AS factory) and the site at a wastewater treatment plant. Saccharin, cyclamate, and acesulfame were the dominant ASs in both gas and particulate phase, with concentrations varying from 0.02 to 1940 pg/m(3). Generally, gas phase concentrations of the ASs were relatively higher in summer, while opposite results were acquired for particulate phase. Wet and dry deposition fluxes were calculated based on the measured AS levels. The results indicated that both wet and dry deposition could efficiently remove ASs in the atmosphere and act as important pollutant sources for the ASs in surface environment.