Characterizing the sorption of polybrominated diphenyl ethers (PBDEs) to cotton and polyester fabrics under controlled conditions

QSPR modeling for the prediction of partitioning of VOCs and SVOCs to indoor fabrics: Integrating environmental factors

Porous fabrics have a significant impact on indoor air quality by adsorbing and emitting chemical substances, such as volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs). Understanding the partition behavior between organic compound molecules and indoor fabrics is crucial for assessing their environmental fate and associated human exposure. The physicochemical properties of fabrics and compounds are fundamental in determining the free energy of partitioning. Moreover, environmental factors like temperature and humidity critically affect the partition process by modifying the thermal and moisture conditions of the fabric. However, existing methods for determining the fabric-air partition coefficient are limited to specific fabric-chemical combinations and lack a comprehensive consideration of indoor environmental factors. In this study, large amounts of experimental data on fabric-air partition coefficients (Kfa) of (S)VOCs were collected for silk, polyester, and cotton fabrics. Key molecular descriptors were identified, integrating the influences of physicochemical properties, temperature, and humidity. Subsequently, two typical quantitative structure-property relationship (QSPR) models were developed to correlate the Kfa values with the molecular descriptors. The fitting performance, robustness, and predictive ability of the two QSPR models were evaluated through statistical analysis and internal/external validation. This research provides insights for the high-throughput prediction of the environmental behaviors of indoor organic compounds.

Blueprint for the design, construction, and validation of a plastic and phthalate-minimised laboratory

Micro and nanosized plastics (MNPs), and a range of associated additive chemicals, have become pervasive contaminants that humans and the environment are exposed to everyday. However, one of the principal challenges in their analysis is adequate strategies to minimise background contamination. Here a blueprint for a specialised plastics and additive-minimised clean room laboratory built for this purpose is presented. Common laboratory construction materials (n = 23) were tested, including acoustic baffles, ceiling materials, floor materials, glazing rubber, and silicone sealant. The % polymer content ranged from 2-76% w/w while the sum concentration of six phthalates ranged from 0.81 (0.73-0.86) to 21000 (15000-27000) mg/kg, assigning many of these materials as inappropriate for use in a clean room environment. The final design of the laboratory consisted of three interconnected rooms, operated under positive pressure with the inner rooms constructed almost entirely of stainless steel. Background concentrations of MNPs and phthalates in the new laboratory were compared to two Physical Containment Level 2 (PC2) laboratory environments, with concentrations of MNPs reduced by > 100 times and phthalates reduced by up to 120 times. This study reports the first known clean room of its kind and provides a blueprint for reference and use by future plastics research.

Modeling clothing as a secondary source of exposure to SVOCs across indoor microenvironments

BACKGROUND

Evidence suggests that clothing can influence human exposure to semi-volatile organic compounds (SVOCs) through transdermal uptake and inhalation.

OBJECTIVES

The objectives of this study were [1] to investigate the potential for clothing to function as a transport vector and secondary source of gas-phase SVOCs across indoor microenvironments, [2] to elucidate how clothing storage, wear, and laundering can influence the dynamics of transdermal uptake, and [3] to assess the potential for multiple human occupants to influence the multimedia dynamics of SVOCs indoors.

METHODS

A computational modeling framework (ABICAM) was expanded, applied, and evaluated by simulating and augmenting two "real-world" chamber experiments. A primary strength of this framework was its representation of occupants and their clothing as unique entities with the potential for location changes.

RESULTS

Estimates of transdermal uptake of diethyl phthalate (DEP) and di(n-butyl) phthalate (DnBP) were generally consistent with those extrapolated from measured concentrations of urinary metabolites, and those predicted by two other mechanistic models. ABICAM predicted that clean clothing (long sleeves, long pants, and socks, 100% cotton, 1 mm thick) readily accumulated DEP (6900-9700 μg) and DnBP (4500-4800 μg) from the surrounding chamber air over 6 h of exposure to average concentrations of 233 (DEP) and 114 (DnBP) μg·m-3. Because of their high capacity, clean clothing also effectively minimized transdermal uptake. In addition, ABICAM predicted that contaminated clothing functioned as a vector for transporting DEP and DnBP across indoor microenvironments and reemitted 13-80% (DEP) and 3-27% (DnBP) of the accumulated masses over 48 h.

SIGNIFICANCE

Though the estimated secondary inhalation exposures from contaminated clothing were low compared to the corresponding primary exposures, these secondary exposures could be accentuated in other contexts, for example, involving longer timeframes of clothing storage, multiple occupants wearing contaminated clothing, and/or repeated instances of clothing-mediated transport of contaminants (e.g., from an occupational setting).

IMPACT

This modeling study reaffirms the effectiveness of clean clothing in reducing transdermal uptake of airborne SVOCs and conversely, that contaminated clothing could be a source of SVOC exposure via transdermal uptake and by acting as a vector for transporting those contaminants to other locations.

Reducing Transdermal Uptake of Semivolatile Plasticizers from Indoor Environments: A Clothing Intervention

Models and laboratory studies suggest that everyday clothing influences the transdermal uptake of semivolatile organic compounds, including phthalate plasticizers, from indoor environments. However, this effect has not been documented in environmental exposure settings. In this pilot study, we quantified daily excretion of 17 urinary metabolites (μg/day) for phthalates and phthalate alternatives in nine participants during 5 days. On Day 0, baseline daily excretion was determined in participants' urine. Starting on Day 1, participants refrained from eating phthalate-heavy foods and using personal care products. On Days 3 and 4, participants wore precleaned clothing as an exposure intervention. We observed a reduction in the daily excretion of phthalates during the intervention; mono-n-butyl phthalate, monoisobutyl phthalate (MiBP), and monobenzyl phthalate were significantly reduced by 35, 38, and 56%, respectively. Summed metabolites of di(2-ethylhexyl)phthalate (DEHP) were also reduced (27%; not statistically significant). A similar reduction among phthalate alternatives was not observed. The daily excretion of MiBP during the nonintervention period strongly correlated with indoor air concentrations of diisobutyl phthalate (DiBP), suggesting that inhalation and transdermal uptake of DiBP from the air in homes are dominant exposure pathways. The results indicate that precleaned clothing can significantly reduce environmental exposure to phthalates and phthalate alternatives.

Refinement and predicting formaldehyde concentrations of indoor fabric: Effects of temperature and humidity

Indoor air pollution resulting from volatile organic compounds (VOCs) is a significant health concern, especially formaldehyde. Therefore, predicting indoor formaldehyde concentration is essential for environmental control. In this research, the authors develop a thermal and wet coupling calculation model of porous fabric that considers the influence of different phases of wet components and the coupling effect of heat and humidity on formaldehyde migration. We propose a modified calculation method of the formaldehyde mass transfer characteristic parameters of fabric to obtain the diffusion coefficient D and partition coefficient K. The heat and humidity coupling model and formaldehyde mass transfer model of fabric are simultaneously solved, and the authors analyze the influence mechanism of fabric loading rate, fabric type, temperature, and humidity on indoor formaldehyde mass transfer characteristics. We study the variation trend of fabric formaldehyde mass transfer characteristics coefficient and the temporal and spatial distribution of indoor formaldehyde concentration. The theoretical model is applied to practical problems by pre-evaluating the indoor formaldehyde concentration of decorated residential buildings in typical climate areas of China before occupancy. The authors obtain the variation rule of indoor formaldehyde concentration of residential buildings under typical hot and humid climate conditions, building materials, furniture, and fabrics. To provide theoretical support for indoor environmental control and human health protection.

Cloth-Air Partitioning of Neutral Per- and Polyfluoroalkyl Substances (PFAS) in North Carolina Homes during the Indoor PFAS Assessment (IPA) Campaign

Partitioning of per- and polyfluoroalkyl substances (PFAS) to indoor materials, including clothing, may prolong the residence time of PFAS indoors and contribute to exposure. During the Indoor PFAS Assessment (IPA) Campaign, we measured concentrations of nine neutral PFAS in air and cotton cloth in 11 homes in North Carolina, for up to 9 months. Fluorotelomer alcohols (i.e., 6:2 FTOH, 8:2 FTOH, and 10:2 FTOH) are the dominant target species in indoor air, with concentrations ranging from 1.8 to 49 ng m-3, 1.2 to 53 ng m-3, and 0.21 to 5.7 ng m-3, respectively. In cloth, perfluorooctane sulfonamidoethanols (i.e., MeFOSE and EtFOSE) accumulated most significantly over time, reaching concentrations of up to 0.26 ng cm-2 and 0.24 ng cm-2, respectively. From paired measurements of neutral PFAS in air and suspended cloth, we derived cloth-air partition coefficients (Kca) for 6:2, 8:2, and 10:2 FTOH; ethylperfluorooctane sulfonamide (EtFOSA); MeFOSE; and EtFOSE. Mean log(Kca) values range from 4.7 to 6.6 and are positively correlated with the octanol-air partition coefficient. We investigated the effect of the cloth storage method on PFAS accumulation and the influence of home characteristics on air concentrations. Temperature had the overall greatest effect. This study provides valuable insights into PFAS distribution, fate, and exposure indoors.

Characteristics and health risks of population exposure to phthalates via the use of face towels

The production of face towels is growing at an annual rate of about 4% in China, reaching 1.13 million tons by 2021. Phthalates (PAEs) are widely used in textiles, and face towels, as an important household textile, may expose people to PAEs via the skin, further leading to health risks. We collected new face towels and analyzed the distribution characterization of PAEs in them. The changes of PAEs were explored in a face towel use experiment and a simulated laundry experiment. Based on the use of face towels by 24 volunteers, we calculated the estimated daily intake (EDI) and comprehensively assessed the hazard quotient (HQ), hazard index (HI), and dermal cancer risk (DCR) of PAEs exposure in the population. PAEs were present in new face towels at total concentrations of <MDL-2388 ng/g, with a median of 173.2 ng/g, which was a lower contamination level compared with other textiles. PAE contents in used face towels were significantly higher than in new face towels. The concentrations of PAEs in coral velvet were significantly higher than those in cotton. Water washing removed some PAEs, while detergent washing increased the PAE content on face towels. Gender, weight, use time, and material were the main factors affecting EDI. The HQ and HI were less than 1, which proved PAEs had no significant non-carcinogenic health risks. Among the five target PAEs studied, DEHP was the only carcinogenic PAE and may cause potential health risks after long-term exposure. Therefore, we should pay more attention to DEHP.

The interaction mechanisms of co-existing polybrominated diphenyl ethers and engineered nanoparticles in environmental waters: A critical review

This review focuses on the occurrence and interactions of engineered nanoparticles (ENPs) and brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) in water systems and the generation of highly complex compounds in the environment. The release of ENPs and BFRs (e.g. PBDEs) to aquatic environments during their usage and disposal are summarised together with their key interaction mechanisms. The major interaction mechanisms including electrostatic, van der Waals, hydrophobic, molecular bridging and steric, hydrogen and π-bonding, cation bridging and ligand exchange were identified. The presence of ENPs could influence the fate and behaviour of PBDEs through the interactions as well as induced reactions under certain conditions which increases the formation of complex compounds. The interaction leads to alteration of behaviour for PBDEs and their toxic effects to ecological receptors. The intermingled compound (ENPs-BFRs) would show different behaviour from the parental ENPs or BFRs, which are currently lack of investigation. This review provided insights on the interactions of ENPs and BFRs in artificial, environmental water systems and wastewater treatment plants (WWTPs), which are important for a comprehensive risk assessment.

A Modified Hydrolysis Method of Decolorizing Reactive-Dyed Polycotton Waste Fabric and Extraction of Terephthalic Acid: A Perspective to Reduce Textile Solid Waste

To manage the polycotton textile-waste fabric (PCWF), a modified alkaline hydrolysis method is used for decolorization and separation of polyester as terephthalic acid (TPA). The effects of optimum conditions on TPA yield (%) have been determined to be $97.66\pm 1.94\%$ . Dye degradations and K/S values are measured by UV-visible spectrophotometer. K/S value of PCWF is 37.06 and separated cotton fabric (SCF) is 0.035, respectively. The chemical functionalities and crystallinity of PCWF, SCF, and TPA are determined by using FTIR and XRD. FTIR peak values are 1684 cm-1, 1574 cm-1, 1512 cm-1, 1280 cm-1, and 1425 cm-1 that prove transformation of polyester to TPA. XRD peaks confirm polyester conversion to TPA, and the values are 17.4, 25.13, 28.12, 29.09, and 38.7. TGA, SEM, and EDX data showed the thermal stability, morphology, and elemental composition of TPA.

Retrieval, Selection, and Evaluation of Chemical Property Data for Assessments of Chemical Emissions, Fate, Hazard, Exposure, and Risks

Reliable chemical property data are the key to defensible and unbiased assessments of chemical emissions, fate, hazard, exposure, and risks. However, the retrieval, evaluation, and use of reliable chemical property data can often be a formidable challenge for chemical assessors and model users. This comprehensive review provides practical guidance for use of chemical property data in chemical assessments. We assemble available sources for obtaining experimentally derived and in silico predicted property data; we also elaborate strategies for evaluating and curating the obtained property data. We demonstrate that both experimentally derived and in silico predicted property data can be subject to considerable uncertainty and variability. Chemical assessors are encouraged to use property data derived through the harmonization of multiple carefully selected experimental data if a sufficient number of reliable laboratory measurements is available or through the consensus consolidation of predictions from multiple in silico tools if the data pool from laboratory measurements is not adequate.

Distribution and source of and health risks associated with polybrominated diphenyl ethers in dust generated by public transportation

Carcinogenic and neurotoxic polybrominated diphenyl ethers (PBDEs) are environmentally ubiquitous and have been widely investigated. However, little is understood regarding their pollution status, sources, and potential risk to persons in public transportation microenvironments (PTMs). We collected 60 dust samples from PTMs and then selected four materials typical of bus interiors to determine the sources of PBDEs in dust using principal component analysis coupled with Mantel tests. We then evaluated the risk of PBDEs to public health using Monte Carlo simulations. We found that PBDE concentrations in dust were 2-fold higher in buses than at bus stops and that brominated diphenyl ether (BDE)-209 was the main pollutant. The number of buses that passed through a bust stop contributed to the extent of PBDE pollution, and the primary potential sources of PBDEs in dust were plastic handles and curtains inside buses; BDE-209 and BDE-154 were the main contributors of pollution. We found that health risk was 8-fold higher in toddlers than in adults and that the reference doses of PBDEs in dust were far below the United States Environmental Protection Agency limits. Our findings provide a scientific basis that may aid in preventing PBDE pollution and guiding related pollution management strategies in PTMs.

E-waste dismantling-related occupational and routine exposure to melamine and its derivatives: Estimating exposure via dust ingestion and hand-to-mouth contact

Melamine (MEL) and its derivatives are increasingly applied as nitrogenous flame retardants in consumer products. Nevertheless, limited information is available on their environmental occurrence and subsequent human exposure via multiple exposure pathways. In this study, we analysed MEL and its derivatives in dust (indication of the dust ingestion route) and hand wipe samples (indication of the hand-to-mouth route) collected in various microenvironments. The levels of ∑MELs in both dust (median: 24,100 ng/g) and participant hand samples (803 ng/m²) collected in e-waste dismantling workshops were significantly higher than those in samples collected in homes (15,600 ng/g and 196 ng/m², respectively), dormitories (13,100 ng/g and 227 ng/m², respectively) and hotel rooms (11,800 ng/g and 154 ng/m², respectively). Generally, MEL dominated in dust samples collected in e-waste dismantling workshops, whereas cyanuric acid dominated in hand wipe samples. This may occur partly because the latter is an ingredient in disinfection products, which are more frequently employed in daily lives during the COVID-19 pandemic. Exposure assessment suggests that dust ingestion is an important exposure pathway among dismantling workers and the general population, whereas hand-to-mouth contact could not be overlooked in certain populations, such as children and dismantling workers not wear gloves at work.

A New Approach to Characterizing the Partitioning of Volatile Organic Compounds to Cotton Fabric

Chemical partitioning to surfaces can influence human exposure by various pathways, resulting in adverse health consequences. Clothing can act as a source, a barrier, or a transient reservoir for chemicals that can affect dermal and inhalation exposure rates. A few clothing-mediated exposure studies have characterized the accumulation of a select number of semi-volatile organic compounds (SVOCs), but systematic studies on the partitioning behavior for classes of volatile organic compounds (VOCs) and SVOCs are lacking. Here, the cloth-air equilibrium partition ratios (K_CA) for carbonyl, carboxylic acid, and aromatic VOC homologous series were characterized for cellulose-based cotton fabric, using timed exposures in a real indoor setting followed by online thermal desorption and nontargeted mass spectrometric analysis. The analyzed VOCs exhibit rapid equilibration within a day. Homologous series generally show linear correlations of the logarithm of K_CA with carbon number and the logarithms of the VOC vapor pressure and octanol-air equilibrium partition ratio (K_OA). When expressed as a volume-normalized partition ratio, log K_{CA_V} values are in a range of 5-8, similar to the values for previously measured SVOCs which have lower volatility. When expressed as surface area-normalized adsorption constants, K_{CA_S} values suggest that equilibration corresponds to a saturated surface coverage of adsorbed species. Aqueous solvation may occur for the most water-soluble species such as formic and acetic acids. Overall, this new experimental approach facilitates VOC partitioning studies relevant to environmental exposure.

Identifying dermal exposure as the dominant pathway of children's exposure to flame retardants in kindergartens

Exploration of multiple sources of brominated (BFRs) and organophosphate flame retardants (OPFRs) for children promotes the understanding of exposure pathways and health risk. 10 BFRs and 9 OPFRs were measured in skin wipes from hands, forehead, and arms of 30 children, and surface wipe samples from sills, toys, desks and floors, and indoor air samples of kindergartens from Xinxiang, China. Higher ∑₉OPFRs concentrations were observed in the forehead (1840 ng/m²), followed by hand (1420 ng/m²) and arm wipes (1130 ng/m²), and the ∑₈BFRs concentrations in forehead, hand and arm wipes were 116, 315 and 165 ng/m², respectively. The total concentration of OPFRs and BFRs in floor wipes (66.1 and 24.5 ng/m²) were lower than those in toy (205 and 535 ng/m²), sill (227 and 30.1 ng/m²) and desk (84.4 and 139 ng/m²) wipes. Concentrations of FRs in forehead wipes were significantly correlated with those in gaseous air (p < 0.05), moderate correlations were found between the hand wipes and surface wipes (p = 0.054). We estimated the daily average dosages (DADs) of children exposure to FRs via multiple pathways. Compared to DADs via inhalation and hand-to-mouth transfer, dermal exposure was determined to be the predominant exposure pathway to ∑₉OPFRs and ∑₈BFRs.

An Overview of Chemical Additives on (Micro)Plastic Fibers: Occurrence, Release, and Health Risks

Plastic fibers are ubiquitous in daily life with additives incorporated to improve their performance. Only a few restrictions exist for a paucity of common additives, while most of the additives used in textile industry have not been clearly regulated with threshold limits. The production of synthetic fibers, which can shed fibrous microplastics easily (< 5 mm) through mechanical abrasion and weathering, is increasing annually. These fibrous microplastics have become the main composition of microplastics in the environment. This review focuses on additives on synthetic fibers; we summarized the detection methods of additives, compared concentrations of different additive types (plasticizers, flame retardants, antioxidants, and surfactants) on (micro)plastic fibers, and analyzed their release and exposure pathways to environment and human beings. Our prediction shows that the amounts of predominant additives (phthalates, organophosphate esters, bisphenols, per- and polyfluoroalkyl substances, and nonylphenol ethoxylates) released from clothing microplastic fibers (MFs) are estimated to reach 35, 10, 553, 0.4, and 568 ton/year to water worldwide, respectively; and 119, 35, 1911, 1.4, and 1965 ton/year to air, respectively. Human exposure to MF additives via inhalation is estimated to be up to 4.5–6440 µg/person annually for the above five additives, and via ingestion 0.1–204 µg/person. Notably, the release of additives from face masks is nonnegligible that annual human exposure to phthalates, organophosphate esters, per- and polyfluoroalkyl substances from masks via inhalation is approximately 491–1820 µg/person. This review helps understand the environmental fate and potential risks of released additives from (micro)plastic fibers, with a view to providing a basis for future research and policy designation of textile additives.

Accumulation of polychlorinated biphenyls in fabrics in a contaminated building, and the effect of laundering

This research investigates sorption of PCBs to fabrics in a contaminated indoor environment and the effect of laundering on PCB removal from the fabrics. Eight articles of clothing were exposed to the air in a PCB-contaminated building. The background air concentration was 670 ng/m³ PCB_total with PCB-52 being the main congener. Air and fabric samples were collected for analysis before and periodically throughout the experiment. After 25 weeks, the remaining fabrics were washed and cut into three pieces each. One part was dried in the contaminated building, second in a PCB-free building and third in a mechanical drier. The PCB mass concentration increased during the first 6-10 weeks for all investigated fabrics, after which some fabrics approached equilibrium for more volatile congeners. Mass-normalized cloth-air partition coefficients were quantified for 9 congeners; for PCB-52, these ranged from 10^6.1 to 10^7.0 which were consistent with previously reported values. Partition coefficients of PCBs were observed to increase with their respective octanol-air partition coefficients. Washing and drying clothes resulted in the removal between 22% and 84% of PCBs. There was no difference in removal percentage after air-drying in clean or contaminated air. Drying in a mechanical drier removed significantly more PCBs than air-drying.

Emerging investigator series: the role of chemical properties in human exposure to environmental chemicals

One of the ultimate goals of environmental exposure science is to mechanistically understand how chemical properties and human behavior interactively determine human exposure to the wide spectrum of chemicals present in the environment. This comprehensive review assembles state-of-the-art knowledge of the role of partitioning, dissociation, mass transfer, and reactive properties in human contact with and absorption of organic chemicals via oral, dermal, and respiratory routes. Existing studies have revealed that chemicals with different properties vary greatly in mass distribution and occurrence among multiple exposure media, resulting in distinct patterns of human intake from the environment. On the other hand, these chemicals encounter different levels of resistance in the passage of intestinal, dermal, and pulmonary absorption barriers and demonstrate different levels of bioavailability, due to the selectivity of biochemical, anatomical and physiological structures of these absorption barriers. Moving forward, the research community needs to gain more in-depth mechanistic insights into the complex processes in human exposure, advance the technique to better characterize and predict chemical properties, generate and leverage experimental data for a more diverse range of chemicals, and describe better the interactions between chemical properties and human behavior.

Reliable Prediction of the Octanol-Air Partition Ratio

The octanol-air equilibrium partition ratio (K_OA ) is frequently used to describe the volatility of organic chemicals, whereby n-octanol serves as a substitute for a variety of organic phases ranging from organic matter in atmospheric particles and soils, to biological tissues such as plant foliage, fat, blood, and milk, and to polymeric sorbents. Because measured K_OA values exist for just over 500 compounds, most of which are nonpolar halogenated aromatics, there is a need for tools that can reliably predict this parameter for a wide range of organic molecules, ideally at different temperatures. The ability of five techniques, specifically polyparameter linear free energy relationships (ppLFERs) with either experimental or predicted solute descriptors, EPISuite's KOAWIN, COSMOtherm, and OPERA, to predict the K_OA of organic substances, either at 25 °C or at any temperature, was assessed by comparison with all K_OA values measured to date. In addition, three different ppLFER equations for K_OA were evaluated, and a new modified equation is proposed. A technique's performance was quantified with the mean absolute error (MAE), the root mean square error (RMSE), and the estimated uncertainty of future predicted values, that is, the prediction interval. We also considered each model's applicability domain and accessibility. With an RMSE of 0.37 and a MAE of 0.23 for predictions of log K_OA at 25 °C and RMSE of 0.32 and MAE of 0.21 for predictions made at any temperature, the ppLFER equation using experimental solute descriptors predicted the K_OA the best. Even if solute descriptors must be predicted in the absence of experimental values, ppLFERs are the preferred method, also because they are easy to use and freely available. Environ Toxicol Chem 2021;40:3166-3180. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Textile Washing Conveys SVOCs from Indoors to Outdoors: Application and Evaluation of a Residential Multimedia Model

Indoor environments have elevated concentrations of numerous semivolatile organic compounds (SVOCs). Textiles provide a large surface area for accumulating SVOCs, which can be transported to outdoors through washing. A multimedia model was developed to estimate advective transport rates (fluxes) of 14 SVOCs from indoors to outdoors by textile washing, ventilation, and dust removal/disposal. Most predicted concentrations were within 1 order of magnitude of measurements from a study of 26 Canadian homes. Median fluxes to outdoors [μg·(year·home)^-1] spanned approximately 4 orders of magnitude across compounds, according to the variability in estimated aggregate emissions to indoor air. These fluxes ranged from 2 (2,4,4'-tribromodiphenyl ether, BDE-28) to 30 200 (diethyl phthalate, DEP) for textile washing, 12 (BDE-28) to 123 200 (DEP) for ventilation, and 0.1 (BDE-28) to 4200 (bis(2-ethylhexyl) phthalate, DEHP) for dust removal. Relative contributions of these pathways to the total flux to outdoors strongly depended on physical-chemical properties. Textile washing contributed 20% tris-(2-chloroisopropyl)phosphate (TCPP) to 62% tris(2-butoxyethyl)phosphate (TBOEP) on average. These results suggest that residential textile washing can be an important transport pathway to outdoors for SVOCs emitted to indoor air, with implications for human and ecological exposure. Interventions should try to balance the complex tradeoff of textile washing by minimizing exposures for both human occupants and aquatic ecosystems.

Characterizing the partitioning behavior of formaldehyde, benzene and toluene on indoor fabrics: Effects of temperature and humidity

Fabrics are widely distributed in residential buildings. Due to their highly porous structures and large specific surface areas, they have strong adsorption properties for volatile organic compounds (VOCs). The secondary source effect that is induced by their desorption can aggravate indoor air pollution and prolong the pollution period. The partition coefficient, which is a characteristic parameter of VOC mass transfer, is sensitive to variations in environmental parameters. However, due to the inherent differences between fabrics and other indoor porous building materials, the relevant research conclusions on the VOC mass transfer parameters of building materials cannot be applied. In addition, the effects of temperature and humidity on the partitioning behavior of VOCs on fabrics have rarely been quantitatively analyzed. Based on an analysis of the porous structure and corresponding mass transfer process of fabrics, a novel prediction model of the fabric partition coefficient under the coupling effect of temperature and humidity is proposed. Three types of indoor typical fabrics and primary water-soluble VOC (formaldehyde) and water-insoluble VOC (benzene, toluene) are examined experimentally via hygroscopicity tests and environmental chamber tests. The experimental results demonstrate the reliability of the proposed model for a variety of conditions.

Adhesion and Removal of Thirdhand Smoke from Indoor Fabrics: A Method for Rapid Assessment and Identification of Chemical Repositories

Thirdhand smoke (THS) is an environmental contaminant that may cause adverse health effects in smokers and nonsmokers. Currently, time-consuming analytical methods are necessary to assess chemicals in THS repositories, like upholstered furniture and clothing. Our goal was to develop a rapid, accessible method that can be used to measure THS contamination in common household fabrics and to evaluate remediation. Cotton, terry cloth, polyester, and wool were exposed to THS for various times in a controlled laboratory environment and then extracted in various media at room temperature or 60 °C to develop an autofluorescent method to quantify THS. Concentrations of nicotine and related alkaloids in the extracts were determined using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and high-performance liquid chromatography (HPLC). The autofluorescence of extracts was proportional to the time and amount of THS exposure received by cotton and terry cloth. Extracts of polyester and wool did not show autofluorescence unless heat was applied during extraction. Nicotine, nicotine alkaloids, and TSNA concentrations were higher in THS extracts from cotton and terry cloth than extracts of polyester and wool carpet, in agreement with the autofluorescence data. For fabrics spiked with 10 mg of nicotine, extraction efficiency was much higher from terry cloth (7 mg) than polyester (0.11 mg). In high relative humidity, nicotine recovery from both cotton and polyester was 80% (~8 mg). Our results provide a simple, rapid method to assess THS contaminants in household fabrics and further show that THS extraction is influenced by fabric type, heat, and humidity. Thus, remediation of THS environments may need to vary depending on the fabric reservoirs being treated. Understanding the dynamics of THS in fabrics can help set up appropriate remediation policies to protect humans from exposure.

Transdermal uptake of benzophenone-3 from clothing: comparison of human participant results to model predictions

BACKGROUND

Models of transdermal uptake of chemicals from clothing have been developed, but not compared with recent human subject experiments. In a well-characterized experiment, participants wore t-shirts pre-dosed with benzophenone-3 (BP-3) and BP-3 and a metabolite were monitored in urine voids.

OBJECTIVE

Compare a dynamic model of transdermal uptake from clothing to results of the human subject experiment.

METHODS

The model simulating dynamic transdermal uptake from clothing was coupled with direct measurements of the gas phase concentration of benzophenone-3 (BP-3) near the surface of clothing to simulate the conditions of the human subject experiment.

RESULTS

The base-case model results were consistent with the those reported for human subjects. The results were moderately sensitive to parameters such as the diffusivity in the stratum corneum (SC), the SC thickness, and SC-air partition coefficient. The model predictions were most sensitive to the clothing fit. Tighter clothing worn during exposure period significantly increased excretion rates but tighter fit "clean" clothing during post-exposure period acts as a sink that reduces transdermal absorption by transferring BP-3 from skin surface lipids to clothing. The shape of the excretion curve was most sensitive to the diffusivity in the SC and clothing fit.

SIGNIFICANCE

This research provides further support for clothing as an important mediator of dermal exposure to environmental chemicals.

Assessing Human Exposure to SVOCs in Materials, Products, and Articles: A Modular Mechanistic Framework

A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.

Halogenated Organic Pollutant Residuals in Human Bared and Clothing-Covered Skin Areas: Source Differentiation and Comprehensive Health Risk Assessment

To comprehensively clarify human exposure to halogenated flame retardants (HFRs) and polychlorinated biphenyls (PCBs) through dermal uptake and hand-to-mouth intake, skin wipe samples from four typical skin locations from 30 volunteers were collected. The total concentration of the target chemicals (24 HFRs and 16 PCBs) ranged from 203 to 4470 ng/m². BDE-209 and DBDPE accounted for about 37 and 40% of ∑₂₄HFRs, respectively, and PCB-41 and PCB-110 were the dominant PCB congeners, with proportion of 24 and 10%, respectively. Although exhibiting relatively lower concentrations of contaminants than bared skin locations, clothing-covered skin areas were also detected with considerable levels of HFRs and PCBs, indicating clothing to be a potentially significant exposure source. Significant differences in HFR and PCB levels and profiles were also observed between males and females, with more lower-volatility chemicals in male-bared skin locations and more higher-volatility compounds in clothing-covered skin locations of female participants. The mean estimated whole-body dermal absorption doses of ∑₈HFRs and ∑₁₆PCBs (2.9 × 10^-4 and 6.7 × 10^-6 mg/kg·d) were 1-2 orders of magnitude higher than ingestion doses via hand-to-mouth contact (6.6 × 10^-7 and 3.1 × 10^-7 mg/kg·d). The total noncarcinogenic health risk resulted from whole-body dermal absorption and oral ingestion to ∑₇HFRs and ∑₁₆PCBs were 5.2 and 0.35, respectively.

Water uptake by indoor surface films

Indoor surfaces provide a plentiful and varied substrate on which multiphase reactions can occur which can be important to the chemical makeup of the indoor environment. Here, we attempt to characterise real indoor surface films via water uptake behaviour and ionic composition. We show that water uptake by indoor films is different than that observed outdoors, and can vary according to room use, building characteristics, and season. Similarly, preliminary investigation into the ionic composition of the films showed that they varied according to the room in which they were collected. This study highlights the importance of different types of soiling to multiphase chemistry, especially those reactions controlled by relative humidity or adsorbed water.

Widespread Occurrence of Bisphenol A in Daily Clothes and Its High Exposure Risk in Humans

Bisphenol A (BPA) is an important endocrine disrupting chemical. Although high levels of BPA in some new clothes have been reported, the occurrence of bisphenol chemicals including BPA in daily clothes is still unknown, and the human exposure to BPA in clothes has not been well assessed. In this study, used/washed clothes were collected from residents' wardrobes and the concentrations of BPA and its analogues were detected. BPA was present in all the used clothes at concentrations ranging from <3.30 to 471 ng/g (median: 34.2 ng/g; mean ± SD: 57.5 ± 93.6 ng/g), while bisphenol S was also detected in 29% of the samples. Although higher average concentration (88.4 ± 289 ng/g) and maximum concentration (1823 ng/g) of BPA were found in the new clothes, the median concentration of BPA in the used clothes (34.2 ng/g) was even higher than that in the new clothes (17.7 ng/g). Cross contamination of BPA during laundering was identified by a simulated laundry experiment, which explained the homogenizing tendency of bisphenol contaminants in the used clothes. An estimated dermal exposure dose of 52.1 ng/kg BW/d was obtained for BPA exposure in children from the highly polluted sweaty clothes (with BPA concentration of 199 ng/g). This indicates a relatively high exposure risk in humans. Compared to other exposure routes, the contribution of dermal exposure dose of BPA from the daily clothes should not be neglected.

Clothing-Mediated Exposures to Chemicals and Particles

A growing body of evidence identifies clothing as an important mediator of human exposure to chemicals and particles, which may have public health significance. This paper reviews and critically assesses the state of knowledge regarding how clothing, during wear, influences exposure to molecular chemicals, abiotic particles, and biotic particles, including microbes and allergens. The underlying processes that govern the acquisition, retention, and transmission of clothing-associated contaminants and the consequences of these for subsequent exposures are explored. Chemicals of concern have been identified in clothing, including byproducts of their manufacture and chemicals that adhere to clothing during use and care. Analogously, clothing acts as a reservoir for biotic and abiotic particles acquired from occupational and environmental sources. Evidence suggests that while clothing can be protective by acting as a physical or chemical barrier, clothing-mediated exposures can be substantial in certain circumstances and may have adverse health consequences. This complex process is influenced by the type and history of the clothing; the nature of the contaminant; and by wear, care, and storage practices. Future research efforts are warranted to better quantify, predict, and control clothing-related exposures.

Impacts of texture properties and airborne particles on accumulation of tobacco-derived chemicals in fabrics

Vapor-phase constituents of tobacco smoke are known to accumulate on clothing surfaces; however, the significance of texture properties, such as specific surface area, porosity, and surface roughness, and airborne particles to the sorption capacity of fabrics has not been adequately addressed. In the present study, cotton (t-shirt) and polyester (pajama and lab coat) fabrics were exposed to cigarette smoke containing gaseous and particulate tobacco-derived compounds (e.g., N-nitrosamines). Fabric-air distribution coefficients and particle deposition fluxes were then determined to evaluate the accumulation of the target analytes. Appreciable amounts of N'-nitrosoanabasine (NAB) and 4'-(nitrosomethylamino)-1-(3-pyridyl)-1-butanone (NNK) were detected in all three fabric types although particle-bound NAB and NNK were found only in cigarette smoke. In addition, the root mean square surface roughness heights for three types of clothes were within the same order of magnitude. As such, the deposition fluxes of particle-bound N'-nitrosonornicotine (NNN) and NNK to fabric surface may have contributed to 6-20% and 56-100% of total NNN and NNK in fabrics, respectively, estimated based on the assumed deposition velocity of 0.65 m h^-1. Apparently, the sorption capacity of fabrics can be greatly influenced by particle-bound compounds on clothing surfaces, resulting in either over- or under-estimation of fabric-air distribution/partitioning coefficients.

Size distribution and clothing-air partitioning of polycyclic aromatic hydrocarbons generated by barbecue

Barbecue (BBQ) is one of the most popular cooking activities with charcoal worldwide and produces abundant polycyclic aromatic hydrocarbons (PAHs) and particulate matter. Size distribution and clothing-air partitioning of particle-bound PAHs are significant for assessing potential health hazards to humans due to exposure to BBQ fumes, but have not been examined adequately. To address this issue, particle and gaseous samples were collected at 2-m and 10-m distances from a cluster of four BBQ stoves. Personal samplers and cotton clothes were carried by volunteers sitting near the BBQ stoves. Particle-bound PAHs (especially 4-6 rings) derived from BBQ fumes were mostly affiliated with fine particles in the size range of 0.18-1.8 μm. High molecular-weight PAHs were mostly unimodal peaking in fine particles and consequently had small geometric mean diameters and standard deviations. Source diagnostics indicated that particle-bound PAHs in BBQ fumes were generated primarily by combustion of charcoal, fat content in food, and oil. The influences of BBQ fumes on the occurrence of particle-bound PAHs decreased with increasing distance from BBQ stoves, due to increased impacts of ambient sources, especially by petrogenic sources and to a lesser extent by wind speed and direction. Octanol-air and clothing-air partition coefficients of PAHs obtained from personal air samples were significantly correlated to each other. High molecular-weight PAHs had higher area-normalized clothing-air partition coefficients in cotton clothes, i.e., cotton fabrics may be a significant reservoir of higher molecular-weight PAHs.

CAPSULE

Particle-bound PAHs from barbecue fumes are generated largely from charcoal combustion and food-charred emissions and mainly affiliated with fine particles.

Indoor Chemistry

This review aims to encapsulate the importance, ubiquity, and complexity of indoor chemistry. We discuss the many sources of indoor air pollutants and summarize their chemical reactions in the air and on surfaces. We also summarize some of the known impacts of human occupants, who act as sources and sinks of indoor chemicals, and whose activities (e.g., cooking, cleaning, smoking) can lead to extremely high pollutant concentrations. As we begin to use increasingly sensitive and selective instrumentation indoors, we are learning more about chemistry in this relatively understudied environment.

Partitioning of PCBs from air to clothing materials in a Danish apartment

Polychlorinated biphenyl (PCB) contamination of buildings continues to pose an exposure threat, even decades after their application in the form of calks and other building materials. In this research, we investigate the ability of clothing to sorb PCBs from contaminated air and thereby influence exposure. The equilibrium concentration of PCB-28 and PCB-52 was quantified for nine used clothing fabrics exposed for 56 days to air in a Danish apartment contaminated with PCBs. Fabric materials included pure materials such as cotton and polyester, or blends of polyester, cotton, viscose/rayon, and/or elastane. Air concentrations were fairly stable over the experimental period, with PCB-28 ranging from 350 to 430 ng/m³ and PCB-52 ranging from 460 to 550 ng/m³ . Mass accumulated in fabric ranged from below detection limits to 4.5 mg/g of fabric. Cotton or materials containing elastane sorbed more than polyester materials on a mass basis. Mass-normalized partition coefficients above detection limits ranged from 10^5.7 to 10^7.0  L/kg. Clothing acts as a reservoir for PCBs that extends dermal exposure, even when outside or in uncontaminated buildings.

Dermal Uptake of Benzophenone-3 from Clothing

Benzophenone-3 (also known as BP-3 or oxybenzone) is added to sunscreens, plastics, and some coatings to filter UV radiation. The suspected endocrine disruptor BP-3 has been detected in the air and settled dust of homes and is expected to redistribute from its original sources to other indoor compartments, including clothing. Given its physical and chemical properties, we hypothesized that dermal uptake from clothing could contribute to the body burden of this compound. First, cotton shirts were exposed to air at an elevated concentration of BP-3 for 32 days; the final air concentration was 4.4 μg/m³. Next, three participants wore the exposed shirts for 3 h. After 3 h of exposure, participants wore their usual clothing during the collection of urine samples for the next 48 h. Urine was analyzed for BP-3, a metabolite (BP-1), and six other UV filters. The rate of urinary excretion of the sum of BP-1 and BP-3 increased for all participants during and following the 3 h of exposure. The summed mass of BP-1 and BP-3 excreted during the first 24 h attributable to wearing exposed t-shirts were 12, 9.9, and 82 μg for participants 1, 2, and 3, respectively. Analysis of these results, coupled with predictions of steady-state models, suggest that dermal uptake of BP-3 from clothing could meaningfully contribute to overall body burden.

SPME-Based Ca-History Method for Measuring SVOC Diffusion Coefficients in Clothing Material

Clothes play an important role in dermal exposure to indoor semivolatile organic compounds (SVOCs). The diffusion coefficient of SVOCs in clothing material (D_m) is essential for estimating SVOC sorption by clothing material and subsequent dermal exposure to SVOCs. However, few studies have reported the measured D_m for clothing materials. In this paper, we present the solid-phase microextraction (SPME) based C_a-history method. To the best of our knowledge, this is the first try to measure D_m with known relative standard deviation (RSD). A thin sealed chamber is formed by a circular ring and two pieces of flat SVOC source materials that are tightly covered by the targeted clothing materials. D_m is obtained by applying an SVOC mass transfer model in the chamber to the history of gas-phase SVOC concentrations (C_a) in the chamber measured by SPME. D_m's of three SVOCs, di-iso-butyl phthalate (DiBP), di-n-butyl phthalate (DnBP), and tris(1-chloro-2-propyl) phosphate (TCPP), in a cotton T-shirt can be obtained within 16 days, with RSD less than 3%. This study should prove useful for measuring SVOC D_m in various sink materials. Further studies are expected to facilitate application of this method and investigate the effects of temperature, relative humidity, and clothing material on D_m.

Dermal uptake of phthalates from clothing: Comparison of model to human participant results

In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate and di-n-butylphthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare-skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake is increased for (i) thinner clothing, (ii) a narrower gap between clothing and skin, and (iii) longer time intervals between laundering and wearing. Enhanced dermal uptake is most pronounced for compounds with clothing-air partition coefficients between 10⁴ and 10⁷ . In the absence of direct measurements of cotton cloth-air partition coefficients, dermal exposure may be predicted using equilibrium data for compounds in equilibrium with cellulose and water, in combination with computational methods of predicting partition coefficients.

From air to clothing: characterizing the accumulation of semi-volatile organic compounds to fabrics in indoor environments

Uptake kinetics of semi-volatile organic compounds (SVOCs) present indoors, namely phthalates and halogenated flame retardants (HFRs), were characterized for cellulose-based cotton and rayon fabrics. Cotton and rayon showed similar accumulation of gas- and particle-phase SVOCs, when normalized to planar surface area. Accumulation was 3-10 times greater by rayon than cotton, when normalized to Brunauer-Emmett-Teller (BET) specific surface area which suggests that cotton could have a longer linear uptake phase than rayon. Linear uptake rates of eight consistently detected HFRs over 56 days of 0.35-0.92 m³ /day.dm² planar surface area and mass transfer coefficients of 1.5-3.8 m/h were statistically similar for cotton and rayon and similar to those for uptake to passive air sampling media. These results suggest air-side controlled uptake and that, on average, 2 m² of clothing typically worn by a person would sequester the equivalent of the chemical content in 100 m³ of air per day. Distribution coefficients between fabric and air (K') ranged from 6.5 to 7.7 (log K') and were within the range of partition coefficients measured for selected phthalates as reported in the literature. The distribution coefficients were similar for low molecular weight HFRs, and up to two orders of magnitude lower than the equilibrium partition coefficients estimated using the COSMO-RS model. Based on the COSMO-RS model, time to reach 95% of equilibrium for PBDEs between fabric and gas-phase compounds ranged from 0.1 to >10 years for low to high molecular weight HFRs.

Screening for halogenated flame retardants in European consumer products, building materials and wastes

To fulfill national and international fire safety standards, flame retardants (FRs) are being added to a wide range of consumer products and building materials consisting of flammable materials like plastic, wood and textiles. While the FR composition of some products and materials has been identified in recent years, the limited global coverage of the data and the large diversity in consumer products necessitates more information for an overall picture of the FR composition in common products/materials. To address this issue, 137 individual samples of various consumer products, building materials and wastes were collected. To identify and characterize potential sources of FRs in indoor environment, all samples were analyzed for content of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDDs) and novel flame retardants (NFRs). The most frequently detected were HBCDDs (85%), with the highest median concentration of Σ₄HBCDDs of 300 mg kg^-1 in polystyrenes. The highest median concentration of Σ₁₀PBDEs was found in recycled plastic materials, reaching 4 mg kg^-1. The lowest concentrations were observed for NFRs, where the median of Σ₁₂NFRs reached 0.4 mg kg^-1 in the group of electrical & electronic equipment wastes. This suggests that for consumer products and building materials that are currently in-use, legacy compounds still contribute to the overall burden of FRs. Additionally, contrasting patterns of FR composition in recycled and virgin plastics, revealed using principle component analysis (PCA), suggest that legacy flame retardants are reentering the market through recycled products, perpetuating the potential for emissions to indoor environments and thus for human exposure.

Estimation of human exposure to halogenated flame retardants through dermal adsorption by skin wipe

This study was undertaken to determine levels of halogenated flame retardants (HFRs) on skin surface to provide preliminary exposure estimates from dermal absorption. Skin wipes of palms, back-of-hands, and forearms were collected from 30 participants by using gauze pads soaked in isopropyl alcohol. Eight polybrominated diphenyl ethers (PBDEs), two novel brominated FRs, and two Dechlorane Plus (DPs) isomers were determined. BDE209, Decabromodiphenylethane (DBDPE), and 1, 2-Bis (2, 4, 6-tribromophenoxy) ethane (BTBPE) were most frequently detected. BDE209 showed the highest median level (1760 ng m^-2), followed by DBDPE (277 ng m^-2) and anti-DP (64 ng m^-2). The comparison of levels on palms and back-of-hands revealed no statistical differences, but both were significantly higher than the levels on forearms. Detections of HFRs on arms suggested that skin areas covered by clothing were exposed to these chemicals likewise. BDE209 and DPs levels from three repeated samples showed moderate to strong reliability over 3 months, while the levels of other compounds were not statistically reliable. Males had significant higher levels than females for most HFRs, while participants' age, time from last hand washing to sampling, and other behaviors contributed limitedly to the variations in levels. Daily uptakes of HFRs through dermal absorption were estimated. The estimated median total exposure from palms, back-of-hands, and forearms were 25.9, 1.6, and 7.2 ng d^-1 for ∑PBDEs, ∑DPs, and ∑NBFRs, respectively, which were in the same ranges as those from diet and dust ingestion for adults in China, suggesting that dermal absorption would be an important exposure route for HFRs.

WITHDRAWN: Estimation of human exposure to halogenated flame retardants through dermal adsorption by skin wipe

The Publisher regrets that this article is an accidental duplication of an article that has already been published, http://dx.doi.org/10.1016/j.chemosphere.2016.10.015. The duplicate article has therefore been withdrawn. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

From Clothing to Laundry Water: Investigating the Fate of Phthalates, Brominated Flame Retardants, and Organophosphate Esters

The accumulation of phthalate esters, brominated flame retardants (BFRs) and organophosphate esters (OPEs) by clothing from indoor air and transfer via laundering to outdoors were investigated. Over 30 days cotton and polyester fabrics accumulated 3475 and 1950 ng/dm(2) ∑5phthalates, 65 and 78 ng/dm(2) ∑10BFRs, and 1200 and 310 ng/dm(2) ∑8OPEs, respectively. Planar surface area concentrations of OPEs and low molecular weight phthalates were significantly greater in cotton than polyester and similar for BFRs and high molecular weight phthalates. This difference was significantly and inversely correlated with KOW, suggesting greater sorption of polar compounds to polar cotton. Chemical release from cotton and polyester to laundry water was >80% of aliphatic OPEs (log KOW < 4), < 50% of OPEs with an aromatic structure, 50-100% of low molecular weight phthalates (log KOW 4-6), and < detection-35% of higher molecular weight phthalates (log KOW > 8) and BFRs (log KOW > 6). These results support the hypothesis that clothing acts an efficient conveyer of soluble semivolatile organic compounds (SVOCs) from indoors to outdoors through accumulation from air and then release during laundering. Clothes drying could as well contribute to the release of chemicals emitted by electric dryers. The results also have implications for dermal exposure.