Assessment of a novel device for onsite integrative large-volume solid phase extraction of water samples to enable a comprehensive chemical and effect-based analysis

Co-occurrence and spatial distribution of organic micropollutants in surface waters of the River Aconcagua and Maipo basins in Central Chile

Organic Micropollutants (OMPs) might pose significant risks to aquatic life and have potential toxic effects on humans. These chemicals typically occur as complex mixtures rather than individually. Information on their co-occurrence and their association with land use is largely lacking, even in industrialized countries. Furthermore, data on the presence of OMPs in freshwater ecosystems in South America is insufficient. Consequently, we assessed the co-occurrence and distribution of OMPs, including pharmaceuticals, pesticides, personal care products, surfactants, and other industrial OMPs, in surface waters of two river basins in central Chile. We focused on identifying and ranking quantified chemicals, classifying their mode of actions, as well as correlating their occurrence with distinct land uses. We identified and quantified 311 compounds that occurred at least once in the River Aconcagua and River Maipo basins, encompassing compounds from urban, agricultural, industrial, and pharmaceutical sectors. Pharmaceuticals were the most frequently occurring chemicals, followed by pesticides, personal care and household products. OMPs with neuroactive properties dominated surface waters in Central Chile, along with OMPs known to alter the cardiovascular and endocrine systems of humans and aquatic animals. Finally, we observed positive correlations between agricultural and urban land uses and OMPs. Our findings represent a step forward in extending current knowledge on the co-occurrence patterns of OMPs in aquatic environments, particularly in developing countries of the southern hemisphere.

Preliminary dataset of emerging contaminants in surface water, bottom water, porewater, and sediment: Urban and aquaculture impacts in Coliumo bay and Caucahue Channel in the central and southern coast of Chile

Synthetic organic chemicals, including pesticides, pharmaceuticals, and industrial compounds, pose a growing threat to marine ecosystems. Despite their potential impact, data on the co-occurrence of these contaminants in multiple compartments, including surface water, bottom water, porewater, and sediment in the marine environment remains limited. Such information is critical for assessing coastal chemical status, establishing environmental quality benchmarks, and conducting comprehensive environmental risk assessments. In this study, we describe a multifaceted monitoring campaign targeting pesticides, pharmaceuticals, surfactants, additives, and plasticizers among other synthetic chemicals in four sampling sites. One site was located in the small Coliumo bay affected by urban settlements and tourism in central-south and additionally, we sampled three sites, Caucahue Channel, affected by urban settlements and salmon farming in northern Patagonia in Chile. Surface water, bottom water, porewater, and adjacent sediment samples were collected for target screening analysis in LC- and GC-HRMS platforms. Our results show the detection of up to 83 chemicals in surface water, 71 in bottom water, 101 in porewater, and 244 in sediments. To enhance data utility and reuse potential, we provide valuable information on the mode of action and molecular targets of the identified chemicals. This comprehensive dataset contributes to defining pollution fingerprints in coastal areas of the Global South, including remote regions in Patagonia. It serves as a critical resource for future research including marine chemical risk assessment, policymaking, and the advancement of environmental protection in these regions.

High-Efficiency Effect-Directed Analysis Leveraging Five High Level Advancements: A Critical Review

Organic contaminants are ubiquitous in the environment, with mounting evidence unequivocally connecting them to aquatic toxicity, illness, and increased mortality, underscoring their substantial impacts on ecological security and environmental health. The intricate composition of sample mixtures and uncertain physicochemical features of potential toxic substances pose challenges to identify key toxicants in environmental samples. Effect-directed analysis (EDA), establishing a connection between key toxicants found in environmental samples and associated hazards, enables the identification of toxicants that can streamline research efforts and inform management action. Nevertheless, the advancement of EDA is constrained by the following factors: inadequate extraction and fractionation of environmental samples, limited bioassay endpoints and unknown linkage to higher order impacts, limited coverage of chemical analysis (i.e., high-resolution mass spectrometry, HRMS), and lacking effective linkage between bioassays and chemical analysis. This review proposes five key advancements to enhance the efficiency of EDA in addressing these challenges: (1) multiple adsorbents for comprehensive coverage of chemical extraction, (2) high-resolution microfractionation and multidimensional fractionation for refined fractionation, (3) robust in vivo/vitro bioassays and omics, (4) high-performance configurations for HRMS analysis, and (5) chemical-, data-, and knowledge-driven approaches for streamlined toxicant identification and validation. We envision that future EDA will integrate big data and artificial intelligence based on the development of quantitative omics, cutting-edge multidimensional microfractionation, and ultraperformance MS to identify environmental hazard factors, serving for broader environmental governance.

Dataset on target chemical and bioassay analysis-Exploring contaminants of emerging concern in a low mountain river of central Germany

Chemical pollution of the aquatic environment is nowadays characterised by increasing levels of anthropogenic organic compounds at low concentrations and is recognised as one of the main drivers of the deteriorated ecological state of European waterbodies. To improve the understanding of the impact of chemical pollution in surface waters, a combined approach of chemical and bioanalytical testing is considered necessary for effective ecologically oriented water management. For this dataset, six 25-L water samples were collected at six sampling sites along the Holtemme River in Central Germany using large-volume solid phase extraction. All samples were analysed by targeted high-resolution liquid chromatography-mass spectrometry (LC-MS) and a selected bioanalytical test battery using effect-based methods. These methods included cytotoxicity assessment, several mechanism-specific CALUXⓇ tests to identify endocrine and oxidative stress-related effects and the fish embryo acute toxicity test to investigate (sub)lethal effects in the model species Danio rerio. This approach provided a dataset that offers a longitudinal characterisation of the chemical pollution and ecotoxicological impacts. The combination of chemical analysis and effect-based analysis is valuable for future studies as it will help researchers, risk assessors and authorities to identify hot spots of chemical pollution, monitor environmental quality standards and recommend mitigation strategies.

Water Quality Monitoring with the Multiplexed Assay MitoOxTox for Mitochondrial Toxicity, Oxidative Stress Response, and Cytotoxicity in AREc32 Cells

Mitochondria play a key role in the energy production of cells, but their function can be disturbed by environmental toxicants. We developed a cell-based mitochondrial toxicity assay for environmental chemicals and their mixtures extracted from water samples. The reporter gene cell line AREc32, which is frequently used to quantify the cytotoxicity and oxidative stress response of water samples, was multiplexed with an endpoint of mitochondrial toxicity. The disruption of the mitochondrial membrane potential (MMP) was quantified by high-content imaging and compared to measured cytotoxicity, predicted baseline toxicity, and activation of the oxidative stress response. Mitochondrial complex I inhibitors showed highly specific effects on the MMP, with minor effects on cell viability. Uncouplers showed a wide distribution of specificity on the MMP, often accompanied by specific cytotoxicity (enhanced over baseline toxicity). Mitochondrial toxicity and the oxidative stress response were not directly associated. The multiplexed assay was applied to water samples ranging from wastewater treatment plant (WWTP) influent and effluent and surface water to drinking and bottled water from various European countries. Specific effects on MMP were observed for the WWTP influent and effluent. This new MitoOxTox assay is an important complement for existing in vitro test batteries for water quality testing and has potential for applications in human biomonitoring.

Dataset comprising pesticides, pharmaceuticals and personal care products, and industrial chemicals detected in streams and rivers of Central Chile

Chemical pollution caused by synthetic organic chemicals at low concentrations in the environment poses a growing threat to the ecological status of aquatic ecosystems. These chemicals are regularly released into surface waters through both treated and untreated effluents from wastewater treatment plants (WWTPs), agricultural runoff, and industrial discharges. Consequently, they accumulate in surface waters, distribute amongst environmental compartments according to their physicochemical properties, and cause adverse effects on aquatic organisms. Unfortunately, there is a lack of data regarding the occurrence of synthetic organic chemicals, henceforth micropollutants, in South American freshwater ecosystems, especially in Chile. To address this research gap, we present a comprehensive dataset comprising concentrations of 153 emerging chemicals, including pesticides, pharmaceutical and personal care products (PPCPs), surfactants, and industrial chemicals. These chemicals were found to co-occur in surface waters within Central Chile, specifically in the River Aconcagua Basin. Our sampling strategy involved collecting surface water samples from streams and rivers with diverse land uses, such as agriculture, urban areas, and natural reserves. For sample extraction, we employed an on-site large-volume solid phase extraction (LVSPE) device. The resulting environmental extracts were then subjected to wide-scope chemical target screening using gas chromatography and liquid chromatography high-resolution mass spectrometry (GC- and LC-HRMS). The dataset we present holds significant value in assessing the chemical status of water bodies. It enables comparative analysis of pollution fingerprints associated with emerging chemicals across different freshwater systems. Moreover, the data can be reused for environmental risk assessment studies. Its utilisation will contribute to a better understanding of the impact and extent of chemical pollution in aquatic ecosystems, facilitating the development of effective mitigation strategies.

Mobile phase and column chemistry selection for high sensitivity non-targeted LC/ESI/HRMS screening of water

Systematic selection of mobile phase and column chemistry type can be critical for achieving optimal chromatographic separation, high sensitivity, and low detection limits in liquid chromatography electrospray high resolution mass spectrometry (LC/MS). However, the selection process is challenging for non-targeted screening where the compounds of interest are not preselected nor available for method optimization. To provide general guidance, twenty different mobile phase compositions and four columns were compared for the analysis of 78 compounds with a wide range of physicochemical properties (logP range from -1.46 to 5.48), and analyte sensitivity was compared between methods. The pH, additive type, column, and organic modifier had significant effects on the analyte response factors, and acidic mobile phases (e.g. 0.1% formic acid) yielded highest sensitivity. In some cases, the effect was attributable to the difference in organic modifier content at the time of elution, depending on the mobile phase and column chemistry. Based on these findings, 0.1% formic acid, 0.1% ammonia and 5.0 mM ammonium fluoride were further evaluated for their performance in non-targeted LC/ESI/HRMS analysis of wastewater treatment plan influent and effluent, using a data dependent MS² acquisition and two different data processing workflows (MS-DIAL, patRoon 2.1) to compare number of detected features and sensitivity. Both data-processing workflows indicated that 0.1% formic acid yielded the highest number of features in full scan spectrum (MS¹)^, as well as the highest number of features that triggered fragmentation spectra (MS²) when dynamic exclusion was used.

Nanoextraction from a flow of a highly diluted solution for much-improved sensitivity in offline chemical detection and quantification

Preconcentration of the target compound is a critical step that ensures the accuracy of the subsequent chemical analysis. In this work, we present a straightforward yet effective liquid-liquid extraction approach based on surface nanodroplets (i.e., nanoextraction) for offline analysis of highly diluted sample solutions. The extraction and sample collection were streamlined in a 3-m microcapillary tube. The concentration of the target analyte in surface nanodroplets was significantly increased compared to the concentration in the sample solution, reaching several orders of magnitude. A limit of detection (LOD) was decreased by a factor of ∼10³ for an organic model compound in Fourier-transform infrared spectroscopy (FTIR) measurements and ∼10⁵ for a model fluorescent dye in fluorescence detection. The quantitative analysis of the organic compound was also achieved in a wide concentration region from 10^-3 M to 10^-4 M. The total volume of surface nanodroplets can be manipulated to further enhance extraction efficiency, according to the principle that governs droplet formation by solvent exchange. Additionally, our method exhibited significantly improved sensitivity compared to traditional dispersive liquid-liquid microextraction (DLLME). The LOD of the fluorescent dye and the organic model compound obtained with DLLME was 3 orders of magnitude and 20 times higher than the LOD achieved through nanoextraction approach. The nanoextraction developed in this work can be applied to preconcentrate multi-compounds from river water samples, without clear interference from each other. This can further extend its applicability for the detection and quantification of target analytes in complex aqueous samples by common analytical instruments.

Identification and Prioritization of Environmental Organic Pollutants: From an Analytical and Toxicological Perspective

Exposure to environmental organic pollutants has triggered significant ecological impacts and adverse health outcomes, which have been received substantial and increasing attention. The contribution of unidentified chemical components is considered as the most significant knowledge gap in understanding the combined effects of pollutant mixtures. To address this issue, remarkable analytical breakthroughs have recently been made. In this review, the basic principles on recognition of environmental organic pollutants are overviewed. Complementary analytical methodologies (i.e., quantitative structure-activity relationship prediction, mass spectrometric nontarget screening, and effect-directed analysis) and experimental platforms are briefly described. The stages of technique development and/or essential parts of the analytical workflow for each of the methodologies are then reviewed. Finally, plausible technique paths and applications of the future nontarget screening methods, interdisciplinary techniques for achieving toxicant identification, and burgeoning strategies on risk assessment of chemical cocktails are discussed.

Neurotoxicity in complex environmental mixtures-a case-study at River Danube in Novi Sad (Serbia) using zebrafish embryos

Acetylcholinesterase (AChE) inhibitors are an important class of neuroactive chemicals that are often detected in aquatic and terrestrial environments. The correct functionality of the AChE enzyme is linked to many important physiological processes such as locomotion and respiration. Consequently, it is necessary to develop new analytical strategies to identify harmful AChE inhibitors in the environment. It has been shown that mixture effects and oxidative stress may jeopardize the application of in vivo assays for the identification of AChE inhibitors in the environment. To confirm that in vivo AChE assays can be successfully applied when dealing with complex mixtures, an extract from river water impacted by non-treated wastewater was bio-tested using the acute toxicity fish embryo test (FET) and AChE inhibition assay with zebrafish. The zebrafish FET showed high sensitivity for the extract (LC10 = relative extraction factor 2.8) and we observed a significant inhibition of the AChE (40%, p < 0.01) after 4-day exposure. Furthermore, the extract was chromatographically fractionated into a total of 26 fractions to dilute the mixture effect and separate compounds according to their physico-chemical properties. As expected, non-specific acute effects (i.e., mortality) disappeared or evenly spread among the fractions, while AChE inhibition was still detected in five fractions. Chemical analysis did not detect any known AChE inhibitors in these active fractions. These results confirm that the AChE assay with Danio rerio can be applied for the detection of neuroactive effects induced in complex environmental samples, but also, they highlight the need to increase analytical and identification techniques for the detection of neurotoxic substances.

A data-derived reference mixture representative of European wastewater treatment plant effluents to complement mixture assessment

Aquatic environments are polluted with a multitude of organic micropollutants, which challenges risk assessment due the complexity and diversity of pollutant mixtures. The recognition that certain source-specific background pollution occurs ubiquitously in the aquatic environment might be one way forward to approach mixture risk assessment. To investigate this hypothesis, we prepared one typical and representative WWTP effluent mixture of organic micropollutants (EWERBmix) comprised of 81 compounds selected according to their high frequency of occurrence and toxic potential. Toxicological relevant effects of this reference mixture were measured in eight organism- and cell-based bioassays and compared with predicted mixture effects, which were calculated based on effect data of single chemicals retrieved from literature or different databases, and via quantitative structure-activity relationships (QSARs). The results show that the EWERBmix supports the identification of substances which should be considered in future monitoring efforts. It provides measures to estimate wastewater background concentrations in rivers under consideration of respective dilution factors, and to assess the extent of mixture risks to be expected from European WWTP effluents. The EWERBmix presents a reasonable proxy for regulatory authorities to develop and implement assessment approaches and regulatory measures to address mixture risks. The highlighted data gaps should be considered for prioritization of effect testing of most prevalent and relevant individual organic micropollutants of WWTP effluent background pollution. The here provided approach and EWERBmix are available for authorities and scientists for further investigations. The approach presented can furthermore serve as a roadmap guiding the development of archetypic background mixtures for other sources, geographical settings and chemical compounds, e.g. inorganic pollutants.

Bioanalytical and chemical characterization of organic micropollutant mixtures in long-term exposed passive samplers from the Joint Danube Survey 4: Setting a baseline for water quality monitoring

Monitoring methodologies reflecting the long-term quality and contamination of surface waters are needed to obtain a representative picture of pollution and identify risk drivers. This study sets a baseline for characterizing chemical pollution in the Danube River using an innovative approach, combining continuous three-months use of passive sampling technology with comprehensive chemical (747 chemicals) and bioanalytical (seven in vitro bioassays) assessment during the Joint Danube Survey (JDS4). This is one of the world's largest investigative surface-water monitoring efforts in the longest river in the European Union, which water after riverbank filtration is broadly used for drinking water production. Two types of passive samplers, silicone rubber (SR) sheets for hydrophobic compounds and AttractSPETM HLB disks for hydrophilic compounds, were deployed at nine sites for approximately 100 days. The Danube River pollution was dominated by industrial compounds in SR samplers and by industrial compounds together with pharmaceuticals and personal care products in HLB samplers. Comparison of the Estimated Environmental Concentrations with Predicted No-Effect Concentrations revealed that at the studied sites, at least one (SR) and 4-7 (HLB) compound(s) exceeded the risk quotient of 1. We also detected AhR-mediated activity, oxidative stress response, peroxisome proliferator-activated receptor gamma-mediated activity, estrogenic, androgenic, and anti-androgenic activities using in vitro bioassays. A significant portion of the AhR-mediated and estrogenic activities could be explained by detected analytes at several sites, while for the other bioassays and other sites, much of the activity remained unexplained. The effect-based trigger values for estrogenic and anti-androgenic activities were exceeded at some sites. The identified drivers of mixture in vitro effects deserve further attention in ecotoxicological and environmental pollution research. This novel approach using long-term passive sampling provides a representative benchmark of pollution and effect potentials of chemical mixtures for future water quality monitoring of the Danube River and other large water bodies.

Evaluation of the endocrine activity of surface water samples using aquatic eleuthero-embryos-A comparison with in vitro assays

Over the previous decade, numerous new approach methodologies (NAMs) have been developed and validated for the detection of endocrine activity of individual chemicals or environmental samples. These NAMs can be largely separated into three categories, in silico tools, in vitro assays, and in vivo assays using organisms or life stages not considered as laboratory animals, each with their own advantages and disadvantages. While in vitro assays provide more mechanistic information, the use of whole organisms such as fish or amphibian embryos provides a more holistic view of the net effects of an environmental sample on hormonal activity. A panel of bioassays was used to test the endocrine activity of several samples from the Danube River at Novi Sad, Serbia. The results of the in vitro assays have been published previously. Here, we present the results of the in vivo assays that were performed at the same time on the same samples. These whole organism assays are based on the use of transgenic fish and amphibian eleuthero-embryos and included the Xenopus Eleuthero-embryo Thyroid Assay (XETA), the Rapid Estrogen ACTivity In Vivo assay (REACTIV), and the Rapid Androgen Disruption Activity Reporter (RADAR) assay. Discrepancies between the different in vitro assays have previously been reported. The results of the in vivo studies also indicate discrepancies between the in vivo and in vitro data with an underestimation of the endocrine activity by the in vitro tests. Therefore, a battery of tests is advised with the initial diagnostic performed with in vivo tests to cover a wider range of modes of action and to allow the appropriate in vitro assay(s) to be selected to confirm the mode of action. PRACTITIONER POINTS: Endocrine activity was quantified in surface water using in vitro and in vivo models. The in vivo results fit with previously reported in vitro results. Higher activity was observed in water samples with in vivo models, which cover a wider range of modes of action. Endocrine activity of surface water samples may be underestimated when measured with in vitro models.

Contamination Pattern and Risk Assessment of Polar Compounds in Snow Melt: An Integrative Proxy of Road Runoffs

To assess the contamination and potential risk of snow melt with polar compounds, road and background snow was sampled during a melting event at 23 sites at the city of Leipzig and screened for 489 chemicals using liquid chromatography high-resolution mass spectrometry with target screening. Additionally, six 24 h composite samples were taken from the influent and effluent of the Leipzig wastewater treatment plant (WWTP) during the snow melt event. 207 compounds were at least detected once (concentrations between 0.80 ng/L and 75 μg/L). Consistent patterns of traffic-related compounds dominated the chemical profile (58 compounds in concentrations from 1.3 ng/L to 75 μg/L) and among them were 2-benzothiazole sulfonic acid and 1-cyclohexyl-3-phenylurea from tire wear and denatonium used as a bittern in vehicle fluids. Besides, the analysis unveiled the presence of the rubber additive 6-PPD and its transformation product N-(1.3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6-PPDQ) at concentrations known to cause acute toxicity in sensitive fish species. The analysis also detected 149 other compounds such as food additives, pharmaceuticals, and pesticides. Several biocides were identified as major risk contributors, with a more site-specific occurrence, to acute toxic risks to algae (five samples) and invertebrates (six samples). Ametryn, flumioxazin, and 1,2-cyclohexane dicarboxylic acid diisononyl ester are the main compounds contributing to toxic risk for algae, while etofenprox and bendiocarb are found as the main contributors for crustacean risk. Correlations between concentrations in the WWTP influent and flow rate allowed us to discriminate compounds with snow melt and urban runoff as major sources from other compounds with other dominant sources. Removal rates in the WWTP showed that some traffic-related compounds were largely eliminated (removal rate higher than 80%) during wastewater treatment and among them was 6-PPDQ, while others persisted in the WWTP.

Spatial and temporal variations in anti-androgenic activity and environmental risk in a small river

The biological effects of multiple compounds have been widely investigated in aquatic environments. However, investigations of spatial and temporal variations in biological effects are rarely performed because they are time-consuming and labor-intensive. In this study, the variability of the anti-androgen, receptor-mediated activity of surface water samples was observed over 3 years using in vitro bioassays. Large-volume water samples were collected at one site upstream (Wer site) and two sites downstream (Sil and Nien sites) of a wastewater treatment plant (WWTP) outfall in the Holtemme River. Anti-AR activity was persistently present in all surface water samples over the three years. Large spatial variations in anti-androgenic activity were observed, with the lowest activity at the Wer site (mean concentration of 9.5 ± 7.2 μg flutamide equivalents/L) and the highest activity at the Sil site (mean concentration of 31.1 ± 12.0 μg flutamide equivalents/L) directly influenced by WWTP effluents. On the temporal scale, no distinct trend for anti-AR activity was observed among the seasons in all three years. The anti-androgenic activity at the upstream Wer site showed a decreasing trend from 2014 to 2016, indicating improved water quality. A novel bioanalytical-equivalent-based risk assessment method considering the frequency of risk occurrence was developed and then utilized to assess the environmental risk of anti-androgenic activity in the Holtemme River. The results revealed that the highest risk was present at the Sil site, while the risk was considerably reduced at the Nien site. The risk at the upstream Wer site was the lowest.

Endocrine disrupting chemicals entering European rivers: Occurrence and adverse mixture effects in treated wastewater

In the present study on endocrine disrupting chemicals (EDCs) in treated wastewater, we used chemical and effect-based tools to analyse 56 wastewater treatment plant (WWTP) effluents from 15 European countries. The main objectives were (i) to compare three different receptor-based estrogenicity assays (ERα-GeneBLAzer, p-YES, ERα-CALUX®), and (ii) to investigate a combined approach of chemical target analysis and receptor-based testing for estrogenicity, glucocorticogenic activity, androgenicity and progestagenic activity (ERα-, GR-, AR- and PR-GeneBLAzer assays, respectively) in treated wastewater. A total of 56 steroids and phenols were detected at concentrations ranging from 25 pg/L (estriol, E3) up to 2.4 μg/L (cortisone). WWTP effluents, which passed an advanced treatment via ozonation or via activated carbon, were found to be less contaminated, in terms of lower or no detection of steroids and phenols, as well as hormone receptor-mediated effects. This result was confirmed by the effect screening, including the three ERα-bioassays. In the GeneBLAzer assays, ERα-activity was detected in 82 %, and GR-activity in 73 % of the samples, while AR- and PR-activity were only measured in 14 % and 21 % of the samples, respectively. 17β-estradiol was confirmed as the estrogen dominating the observed estrogenic mixture effect and triamcinolone acetonide was the dominant driver of glucocorticogenic activity. The comparison of bioanalytical equivalent concentrations (BEQ) predicted from the detected concentrations and the relative effect potency (BEQ_chem) with measured BEQ (BEQ_bio) demonstrated good correlations of chemical target analysis and receptor-based testing results with deviations mostly within a factor of 10. Bioassay-specific effect-based trigger values (EBTs) from the literature, but also newly calculated EBTs based on previously proposed derivation options, were applied and allowed a preliminary assessment of the water quality of the tested WWTP effluent samples. Overall, this study demonstrates the high potential of linking chemical with effect-based analysis in water quality assessment with regard to EDC contamination.

Effect-directed analysis of a hospital effluent sample using A-YES for the identification of endocrine disrupting compounds

An effect-directed analysis (EDA) approach was used to identify the compounds responsible for endocrine disruption in a hospital effluent (Basque Country). In order to facilitate the identification of the potentially toxic substances, a sample was collected using an automated onsite large volume solid phase extraction (LV-SPE) system. Then, it was fractionated with a two-step orthogonal chromatographic separation and tested for estrogenic effects with a recombinant yeast (A-YES) in-vitro bioassay. The fractionation method was optimized and validated for 184 compounds, and its application to the hospital effluent sample allowed reducing the number of unknowns from 292 in the raw sample to 35 after suspect analysis of the bioactive fractions. Among those, 7 of them were confirmed with chemical standards. In addition, target analysis of the raw sample confirmed the presence of mestranol, estrone and dodemorph in the fractions showing estrogenic activity. Predictive estrogenic activity modelling using quantitative structure-activity relationships indicated that the hormones mestranol (5840 ng/L) and estrone (128 ng/L), the plasticiser bisphenol A (9219 ng/L) and the preservative butylparaben (1224 ng/L) were the main contributors of the potential toxicity. Derived bioanalytical equivalents (BEQs) pointed mestranol and estrone as the main contributors (56 % and 43 %, respectively) of the 50 % of the sample's explained total estrogenic activity.

A risk based assessment approach for chemical mixtures from wastewater treatment plant effluents

In this study, 56 effluent samples from 52 European wastewater treatment plants (WWTPs) were investigated for the occurrence of 499 emerging chemicals (ECs) and their associated potential risks to the environment. The two main objectives were (i) to extend our knowledge on chemicals occurring in treated wastewater, and (ii) to identify and prioritize compounds of concern based on three different risk assessment approaches for the identification of consensus mixture risk drivers of concern. Approaches include (i) PNEC and EQS-based regulatory risk quotients (RQs), (ii) species sensitivity distribution (SSD)-based hazard units (HUs) and (iii) toxic units (TUs) for three biological quality elements (BQEs) algae, crustacean, and fish. For this purpose, solid-phase extracts were analysed with wide-scope chemical target screening via liquid chromatography high-resolution mass spectrometry (LC-HRMS), resulting in 366 detected compounds, with concentrations ranging from < 1 ng/L to > 100 µg/L. The detected chemicals were categorized with respect to critical information relevant for risk assessment and management prioritization including: (1) frequency of occurrence, (2) measured concentrations, (3) use groups, (4) persistence & bioaccumulation, and (5) modes of action. A comprehensive assessment using RQ, HU and TU indicated exceedance of risk thresholds for the majority of effluents with RQ being the most sensitive metric. In total, 299 out of the 366 compounds were identified as mixture risk contributors in one of the approaches, while 32 chemicals were established as consensus mixture risk contributors of high concern, including a high percentage (66%) of pesticides and biocides. For samples which have passed an advanced treatment using ozonation or activated carbon (AC), consistently much lower risks were estimated.

Mutagenicity of the Danube River: The contribution of liquid phase and particulate suspended matter

Bioassays have been used to complement the chemical characterization of aquatic mutagenicity, but the tests sometimes are done only with water liquid phase (LP). Particle-bound mutagens are important because they can be ingested by filtering organisms. Our objective was to evaluate the mutagenicity of organic extracts of the LP and the water suspended particulate matter (SPM) from 13 sites along Danube River with the Salmonella/microsome microsuspension assay using TA98, YG1041, TA1538, and YG5185 strains. A high incidence of mutagenicity was detected, 84% for LP and 92% for SPM samples. The contribution of SPM to the mutagenicity was relatively small when compared with LP however, for five sites SPM was responsible for the whole mutagenicity, highlighting the importance of analyzing SPM when assessing water mutagenicity. YG1041 was the most sensitive strain and should be considered in future water mutagenicity monitoring programs, but it will depend on the main pollution sources.

Sources and Fate of the Antiandrogenic Fluorescent Dye 4-Methyl-7-Diethylaminocoumarin in Small River Systems

Recently, the potent antiandrogen 4-methyl-7-diethylaminocoumarin (C47) and its potential transformation products 4-methyl-7-ethylaminocoumarin (C47T1) and 4-methyl-7-aminocoumarin (C47T2) were identified as novel environmental contaminants. We assessed for the first time the sources, distribution, and fate of these compounds in aquatic systems using the Holtemme River (Saxony-Anhalt, Germany), which is a hotspot for these contaminants. To this end, wastewater-treatment plant (WWTP) influent and effluent samples, surface water samples over 3 years, and the longitudinal profiles in water, sediment, and gammarids were analyzed. From the longitudinal profile of the river stretch, the WWTP of Silstedt was identified as the sole point source for these compounds in the River Holtemme, and exposure concentrations in the low micrograms per liter range could be recorded continuously over 3 years. Analysis of WWTP influent and effluent showed a transformation of approximately half of the C47 into C47T1 and C47T2 but no complete removal. A further attenuation of the three coumarins after discharge into the river could be largely attributed to dilution, while transformation was only approximately 20%, thus suggesting a significant persistence in aquatic systems. Experimentally derived partitioning coefficients between water and sediment organic carbon exceeded those predicted using the OPERA quantitative structure-activity relationship tools and polyparameter linear free-energy relationships by up to 93-fold, suggesting cation binding as a significant factor for their sorption behavior. Near-equilibrium conditions between water and sediment were not observed close to the emitting WWTP but farther downstream in the river. Experimental and predicted bioaccumulation factors for gammarids were closely matching, and the concentrations in field-sampled gammarids were close to steady state with exposure concentrations in the water phase of the river. Environ Toxicol Chem 2021;40:3078-3091. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Guide to Semi-Quantitative Non-Targeted Screening Using LC/ESI/HRMS

Non-targeted screening (NTS) with reversed phase liquid chromatography electrospray ionization high resolution mass spectrometry (LC/ESI/HRMS) is increasingly employed as an alternative to targeted analysis; however, it is not possible to quantify all compounds found in a sample with analytical standards. As an alternative, semi-quantification strategies are, or at least should be, used to estimate the concentrations of the unknown compounds before final decision making. All steps in the analytical chain, from sample preparation to ionization conditions and data processing can influence the signals obtained, and thus the estimated concentrations. Therefore, each step needs to be considered carefully. Generally, less is more when it comes to choosing sample preparation as well as chromatographic and ionization conditions in NTS. By combining the positive and negative ionization mode, the performance of NTS can be improved, since different compounds ionize better in one or the other mode. Furthermore, NTS gives opportunities for retrospective analysis. In this tutorial, strategies for semi-quantification are described, sources potentially decreasing the signals are identified and possibilities to improve NTS are discussed. Additionally, examples of retrospective analysis are presented. Finally, we present a checklist for carrying out semi-quantitative NTS.

Disentangling multiple chemical and non-chemical stressors in a lotic ecosystem using a longitudinal approach

Meeting ecological and water quality standards in lotic ecosystems is often failed due to multiple stressors. However, disentangling stressor effects and identifying relevant stressor-effect-relationships in complex environmental settings remain major challenges. By combining state-of-the-art methods from ecotoxicology and aquatic ecosystem analysis, we aimed here to disentangle the effects of multiple chemical and non-chemical stressors along a longitudinal land use gradient in a third-order river in Germany. We distinguished and evaluated four dominant stressor categories along this gradient: (1) Hydromorphological alterations: Flow diversity and substrate diversity correlated with the EU-Water Framework Directive based indicators for the quality element macroinvertebrates, which deteriorated at the transition from near-natural reference sites to urban sites. (2) Elevated nutrient levels and eutrophication: Low to moderate nutrient concentrations together with complete canopy cover at the reference sites correlated with low densities of benthic algae (biofilms). We found no more systematic relation of algal density with nutrient concentrations at the downstream sites, suggesting that limiting concentrations are exceeded already at moderate nutrient concentrations and reduced shading by riparian vegetation. (3) Elevated organic matter levels: Wastewater treatment plants (WWTP) and stormwater drainage systems were the primary sources of bioavailable dissolved organic carbon. Consequently, planktonic bacterial production and especially extracellular enzyme activity increased downstream of those effluents showing local peaks. (4) Micropollutants and toxicity-related stress: WWTPs were the predominant source of toxic stress, resulting in a rapid increase of the toxicity for invertebrates and algae with only one order of magnitude below the acute toxic levels. This toxicity correlates negatively with the contribution of invertebrate species being sensitive towards pesticides (SPEAR_pesticides index), probably contributing to the loss of biodiversity recorded in response to WWTP effluents. Our longitudinal approach highlights the potential of coordinated community efforts in supplementing established monitoring methods to tackle the complex phenomenon of multiple stress.

Suspect and non-target screening: the last frontier in environmental analysis

Suspect and non-target screening (SNTS) techniques are arising as new analytical strategies useful to disentangle the environmental occurrence of the thousands of exogenous chemicals present in our ecosystems. The unbiased discovery of the wide number of substances present over environmental analysis needs to find a consensus with powerful technical and computational requirements, as well as with the time-consuming unequivocal identification of discovered analytes. Within these boundaries, the potential applications of SNTS include the studies of environmental pollution in aquatic, atmospheric, solid and biological samples, the assessment of new compounds, transformation products and metabolites, contaminant prioritization, bioremediation or soil/water treatment evaluation, and retrospective data analysis, among many others. In this review, we evaluate the state of the art of SNTS techniques going over the normalized workflow from sampling and sample treatment to instrumental analysis, data processing and a brief review of the more recent applications of SNTS in environmental occurrence and exposure to xenobiotics. The main issues related to harmonization and knowledge gaps are critically evaluated and the challenges of their implementation are assessed in order to ensure a proper use of these promising techniques in the near future.

Suspended Particulate Matter-A Source or Sink for Chemical Mixtures of Organic Micropollutants in a Small River under Baseflow Conditions?

Suspended particulate matter (SPM) plays an important role in the fate of organic micropollutants in rivers during rain events, when sediments are remobilized and turbid runoff components enter the rivers. Under baseflow conditions, the SPM concentration is low and the contribution of SPM-bound contaminants to the overall risk of organic contaminants in rivers is assumed to be negligible. To challenge this assumption, we explored if SPM may act as a source or sink for all or specific groups of organic chemicals in a small river. The concentrations of over 600 contaminants and the mixture effects stemming from all chemicals in in vitro bioassays were measured for river water, SPM, and the surface sediment after solid-phase extraction or exhaustive solvent extraction. The bioavailable fractions of chemicals and mixture effects were estimated after passive equilibrium sampling of enriched SPM slurries and sediments in the lab. Dissolved compounds dominated the total chemical burden in the water column (water plus SPM) of the river, whereas SPM-bound chemicals contributed up to 46% of the effect burden even if the SPM concentration in rivers was merely 1 mg/L. The equilibrium between water and SPM was still not reached under low-flow conditions with SPM as a source of water contamination. The ratios of SPM-associated to sediment-associated neutral and hydrophobic chemicals as well as the ratios of the mixture effects expressed as bioanalytical equivalent concentrations were close to 1, suggesting that the surface sediment can be used as a proxy for SPM under baseflow conditions when the sampling of a large amount of water to obtain sufficient SPM cannot be realized.

Quantitative evaluation of polyethersulfone and polytetrafluoroethylene membrane sorption in a polar organic chemical integrative sampler (POCIS)

The lag effect in the polar organic chemical integrative sampler (POCIS) equipped with a polyethersulfone (PES) membrane (POCIS-PES) is a potential limitation for its application in water environments. In this study, a POCIS with a poly(tetrafluoroethylene) (PTFE) membrane (POCIS-PTFE) was investigated for circumventing membrane sorption in order to provide more reliable concentration measurements of organic contaminants. Sampler characteristics such as sampling rates (R_S) and sampler-water partition coefficients (K_SW) were similar for POCIS-PES and POCIS-PTFE, indicating that partitioning into Oasis HLB as the receiving phase dominates the overall partitioning from the aqueous phase to the POCIS. Membrane sorption was quantified in both laboratory and field experiments. Although POCIS-PTFE showed minor membrane sorption, the PTFE membranes were not robust enough to prevent changes in the sorption of the pollutants to the inner Oasis HLB sorbent due to biofouling. This was reflected in significant ionization effects in the electrospray ionization (ESI) source during the LC-MS/MS analysis. Despite clear differences in the ionization effects, the two POCISs types provided similar time-weighted average (C_TWA) concentrations after a two-week passive sampling campaign in surface water and the outflow of a wastewater treatment plant. This study contributes to a more detailed understanding of POCIS application by providing a quantitative evaluation of membrane sorption and its associated effects in the laboratory and field.

Estrogenic activity of surface waters using zebrafish- and human-based in vitro assays: The Danube as a case-study

Most in vitro reporter gene assays used to assess estrogenic contamination are based on human estrogen receptor α (hERα) activation. However, fish bioassays can have distinct response to estrogenic chemicals and mixtures, questioning the relevance of human-based bioassays for assessing risk to this species. In this study, zebrafish liver cells stably expressing zebrafish ERβ2 (ZELHβ2) and human breast cancer cells expressing hERα (MELN) were used to quantify the estrogenic activity of 25 surface water samples of the Danube River, for which chemicals have been previously quantified. Most samples had a low estrogenic activity below 0.1 ng/L 17β-estradiol-equivalents that was more often detected by MELN cells, while ZELHβ2 response tend to be lower than predicted based on the chemicals identified. Nevertheless, both bioassays quantified well a higher estrogenic activity at two sites, which was confirmed in vivo using a transgenic zebrafish assay. The results are discussed considering the effect-based trigger values proposed for water quality monitoring.

Assessing the Mixture Effects in In Vitro Bioassays of Chemicals Occurring in Small Agricultural Streams during Rain Events

Rain events may impact the chemical pollution burden in rivers. Forty-four small streams in Germany were profiled during several rain events for the presence of 395 chemicals and five types of mixture effects in in vitro bioassays (cytotoxicity; activation of the estrogen, aryl hydrocarbon, and peroxisome proliferator-activated receptors; and oxidative stress response). While these streams were selected to cover a wide range of agricultural impacts, in addition to the expected pesticides, wastewater-derived chemicals and chemicals typical for street runoff were detected. The unexpectedly high estrogenic effects in many samples indicated the impact by wastewater or overflow of combined sewer systems. The 128 water samples exhibited a high diversity of chemical and effect patterns, even for different rain events at the same site. The detected 290 chemicals explained only a small fraction (<8%) of the measured effects. The experimental effects of the designed mixtures of detected chemicals that were expected to dominate the mixture effects of detected chemicals were consistent with predictions for concentration addition within a factor of two for 94% of the mixtures. Overall, the burden of chemicals and effects was much higher than that previously detected in surface water during dry weather, with the effects often exceeding proposed effect-based trigger values.

A Tiered Approach for Screening and Assessment of Environmental Mixtures by Omics and In Vitro Assays

New methodology approaches with a broad coverage of the biological effects are urgently needed to evaluate the safety of the universe of environmentally relevant chemicals. Here, we propose a tiered approach incorporating transcriptomics and in vitro bioassays to assess environmental mixtures. The mixture samples and the perturbed biological pathways are prioritized by concentration-dependent transcriptome (CDT) and then used to guide the selection of in vitro bioassays for toxicant identification. To evaluate omics' screening capability, we first applied a CDT technique to test mixture samples by HepG2 and MCF7 cells. The effect recoveries of large-volume solid-phase extraction on the overall bioactivity of the mixture were 48.9% in HepG2 and 58.3% in MCF7. The overall bioactivity potencies obtained by transcriptomics were positively correlated with the panel of 8 bioassays among 14 mixture samples combined with the previous data. Transcriptomics could predict their activation status (AUC = 0.783) and the relative potency (p < 0.05) of bioassays for four of the eight receptors (AhR, ER, AR, and Nrf2). Furthermore, the CDT identified other biological pathways perturbated by mixture samples, such as the pathway related to TP53, CAR, FXR, HIF, THRA, etc. Overall, this study demonstrates the potential of concentration-dependent omics for effect-based water quality assessment.

Rapid Assessment of Opioid Exposure and Treatment in Cities Through Robotic Collection and Chemical Analysis of Wastewater

INTRODUCTION

Accurate data regarding opioid use, overdose, and treatment is important in guiding community efforts at combating the opioid epidemic. Wastewater-based epidemiology (WBE) is a potential method to quantify community-level trends of opioid exposure beyond overdose data, which is the basis of most existing response efforts. However, most WBE efforts collect parent opioid compounds (e.g., morphine) at wastewater treatment facilities, measuring opioid concentrations across large catchment zones which typically represent an entire municipality. We sought to deploy a robotic sampling device at targeted manholes within a city to semi-quantitatively detect opioid metabolites (e.g., morphine glucuronide) at a sub-city community resolution.

METHODS

We deployed a robotic wastewater sampling platform at ten residential manholes in an urban municipality in North Carolina, accounting for 44.5% of the total municipal population. Sampling devices comprised a robotic sampling arm with in situ solid phase extraction, and collected hourly samples over 24-hour periods. We used targeted mass spectrometry to detect the presence of a custom panel of opioids, naloxone, and buprenorphine.

RESULTS

Ten sampling sites were selected to be a representative survey of the entire municipality by integrating sewer network and demographic GIS data. All eleven metabolites targeted were detected during the program. The average morphine milligram equivalent (MME) across the nine illicit and prescription opioids, as excreted and detected in wastewater, was 49.1 (standard deviation of 31.9) MME/day/1000-people. Codeine was detected most frequently (detection rate of 100%), and buprenorphine was detected least frequently (12%). The presence of naloxone correlated with city data of known overdoses reversed by emergency medical services in the prehospital setting.

CONCLUSION

Wastewater-based epidemiology with smart sewer selection and robotic wastewater collection is feasible to detect the presence of specific opioids, naloxone, methadone, and buprenorphine within a city. These results suggest that wastewater epidemiology could be used to detect patterns of opioid exposure and may ultimately provide information for opioid use disorder (OUD) treatment and harm reduction programs.

Effect-Directed Analysis of Progestogens and Glucocorticoids at Trace Concentrations in River Water

Effect-based monitoring is increasingly applied to detect and-in conjunction with chemical analysis-to identify endocrine-disrupting compounds (EDCs) in the environment. Although this approach of effect-directed analysis has been successfully demonstrated for estrogenicity and androgenicity, data on progestogens and glucocorticoids driving endocrine disruption are quite limited. We investigated progestogenic and glucocorticoid activities in Danube River water receiving untreated wastewater from Novi Sad, Serbia. After a 2-step fractionation, all fractions were tested with reporter gene bioassays for agonistic and antagonistic hormonal responses at progestogenic and glucocorticoid hormone receptors as well as with target and nontarget analytical screening of active fractions by liquid chromatography-high-resolution mass spectrometry. Due to masking by cytotoxic mixture components, the effects could not be detected in the raw water extract but were unraveled only after fractionation. Target chemical screening of the fraction that was active in the progesterone receptor (PR) assay revealed that progesterone and megestrol acetate were predominant drivers of PR-mediated activity along with medroxyprogesterone, dihydrotestosterone, androsterone, and epiandrosterone. Hydrocortisone was detected at sub-ng/L concentration in the active fraction in the glucocorticoid receptor (GR) assay but could not explain a significant fraction of the observed GR activity. The present study indicates that effect-based monitoring is a powerful tool to detect EDCs in the aquatic environment but that fractionation may be required to avoid masking effects of mixture components. Future effect-directed analysis studies are required to better understand the occurrence of EDCs and masking compounds in different lipophilicity windows, to finally reduce fractionation requirements for monitoring to a smart clean-up. Environ Toxicol Chem 2019;39:189-199. © 2019 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

Designing field-based investigations of organic micropollutant fate in rivers

Organic micropollutants in rivers are emitted via diffuse and point sources like from agricultural practice or wastewater treatment plants (WWTP). Extensive laboratory and field experiments have been conducted to understand emissions and fate of these pollutants in freshwaters. Nevertheless, data is often difficult to compare since common protocols for appropriate approaches are largely missing. Thus, interpretation of the observed changes in substance concentrations and of the underlying fate of these compounds downstream of the chemical input into the river is still challenging. To narrow this research gap, (1) process understanding and (2) measurement approaches for field-based investigations are critically reviewed in this article. The review includes, on the one hand, processes that change the volume of the water (hydrological processes) and, on the other hand, processes that affect the substance mass within the water (distribution and transformation). Environmental boundary conditions for the purpose of better comparability of different attenuation studies, as well as promising state-of-the-art measurement approaches from different disciplines, are presented. This overview helps to develop a tailored procedure to assess turnover mechanisms of organic micropollutants under field conditions. In this respect, further research needs to standardize interdisciplinary approaches to increase the informative value of collected data.

Mitochondrial Toxicity of Selected Micropollutants, Their Mixtures, and Surface Water Samples Measured by the Oxygen Consumption Rate in Cells

Some environmental pollutants impair mitochondria, which are of vital importance as energy factories in eukaryotic cells. Mitochondrial toxicity was quantified by measuring the change of the oxygen consumption rate (OCR) of HepG2 cells with the Agilent Seahorse XF^e 96 Analyzer. Various mechanisms of mitochondrial toxicity, including inhibition of the electron transport chain or adenosine triphosphate (ATP) synthase as well as uncoupling of oxidative phosphorylation, were differentiated by dosing the sample in parallel with reference compounds following the OCR over time. These time-OCR traces were used to derive effect concentrations for 10% inhibition of the electron transport chain or 10% of uncoupling. The low effect level of 10% was necessary because environmental mixtures contain thousands of chemicals; only few of them interfere with mitochondria, but the others cause cytotoxicity. The OCR bioassay was validated with environmental pollutants of known mechanism of mitochondrial toxicity. Binary mixtures of uncouplers or inhibitors acted according to the mixture model of concentration addition. Uncoupling and/or inhibitory effects were detected in extracts of river water samples without apparent cytotoxicity. Uncoupling effects could only be quantified in water samples if inhibitory effects occurred at lower concentrations because no uncoupling can be detected without an appreciable membrane potential built up. The OCR bioassay can thus complement chemical analysis and in vitro bioassays for monitoring micropollutants in water. Environ Toxicol Chem 2019;00:1-12. © 2019 SETAC.

What you extract is what you see: Optimising the preparation of water and wastewater samples for in vitro bioassays

The assessment of water quality is crucial for safeguarding drinking water resources and ecosystem integrity. To this end, sample preparation and extraction is critically important, especially when investigating emerging contaminants and the toxicity of water samples. As extraction methods are rarely optimised for bioassays but rather adopted from chemical analysis, this may result in a misrepresentation of the actual toxicity. In this study, surface water, groundwater, hospital and municipal wastewater were used to characterise the impacts of common sample preparation techniques (acidification, filtration and solid phase extraction (SPE)) on the outcomes of eleven in vitro bioassays. The latter covered endocrine activity (reporter gene assays for estrogen, androgen, aryl-hydrocarbon, retinoic acid, retinoid X, vitamin D, thyroid receptor), mutagenicity (Ames fluctuation test), genotoxicity (umu test) and cytotoxicity. Water samples extracted using different SPE sorbents (Oasis HLB, Supelco ENVI-Carb+, Telos C18/ENV) at acidic and neutral pH were compared for their performance in recovering biological effects. Acidification, commonly used for stabilisation, significantly altered the endocrine activity and toxicity of most (waste)water samples. Sample filtration did not affect the majority of endpoints but in certain cases affected the (anti-)estrogenic and dioxin-like activities. SPE extracts (10.4 × final concentration), including WWTP effluents, induced significant endocrine effects that were not detected in aqueous samples (0.63 × final concentration), such as estrogenic, (anti-)androgenic and dioxin-like activities. When ranking the SPE methods using multivariate Pareto optimisation an extraction with Telos C18/ENV at pH 7 was most effective in recovering toxicity. At the same time, these extracts were highly cytotoxic masking the endpoint under investigation. Compared to that, extraction at pH 2.5 enriched less cytotoxicity. In summary, our study demonstrates that sample preparation and extraction critically affect the outcome of bioassays when assessing the toxicity of water samples. Depending on the water matrix and the bioassay, these methods need to be optimised to accurately assess water quality.

Integrated zebrafish-based tests as an investigation strategy for water quality assessment

Water pollution risks to human health and the environment are emerging as serious concerns in the European Union and worldwide. With the aim to achieve good ecological and chemical status of all European water bodies, the "European Water Framework Directive" (WFD) was enacted. With the framework, bioanalytical techniques have been recognized as an important aspect. However, there are limitations to the application of bioassays directly for water quality assessment. Such approaches often fail to identify pollutants of concern, since the defined priority and monitored pollutants often fail to explain the observed toxicity. In this study, we integrated an effect-based risk assessment with a zebrafish-based investigation strategy to evaluate water sample extracts and fractions collected from the Danube. Four tiered bioassays were implemented, namely RNA-level gene expression assay, protein-level ethoxyresorufin-O-deethylase (EROD) assay, cell-level micronucleus assay and organism-level fish embryo test (FET). The results show that teratogenicity and lethality during embryonic development might be induced by molecular or cellular damages mediated by the aryl hydrocarbon receptor (AhR) -mediated activity, estrogenic activity and genotoxic activity. With the combination of high-throughput fractionation, this effect-based strategy elucidated the major responsible mixtures of each specific toxic response. In particularly, the most toxic mixture in faction F4, covering a log Kow range from 2.83 to 3.42, was composed by 12 chemicals, which were then evaluated as a designed mixture. Our study applied tiered bioassays with zebrafish to avoid interspecies differences and highlights effect-based approaches to address toxic mixtures in water samples. This strategy can be applied for large throughput screenings to support the main toxic compounds identification in water quality assessment.

Integrating bioassays, chemical analysis and in silico techniques to identify genotoxicants in surface water

Identification of hazardous compounds, as the first step of water protection and regulation, is still challenged by the difficulty to establish a linkage between toxic effects and suspected contaminants. Genotoxic compounds are one type of highly relevant toxicants in surface water, which may attack the DNA and lead to cancer in individual organism, or even damaged germ cells to be passed on to future generations. Thus, the establishment of a linkage between genotoxic effects and genotoxicant is important for environmental toxicologists and chemists. For this purpose, in the present study in silico methods were integrated with bioassays, chemical analysis and literature information to identify genotoxicants in surface water. Large volume water samples from 22 sampling sites of the Danube were collected and subjected to biological and chemical analysis. Samples from the most toxic sites (JDS32, JDS44 and JDS63) induced significant genotoxic effects in the micronucleus assay, and two of them caused mutagenicity in the Ames fluctuation assay. Chemical analysis showed that 68 chemicals were detected in these most toxic samples. Literature findings and in silico techniques using the OECD QSAR Toolbox and the ChemProp software package revealed genotoxic potentials for 29 compounds out of 68 targeted chemicals. To confirm the integrative technical data, the micronucleus assay and the Ames fluctuation assay were applied with artificial mixtures of those compounds and the raw water sample extracts. The results showed that 18 chemicals explained 48.5% of the genotoxicity in the micronucleus assay. This study highlights the capability of in silico techniques in linking adverse biological effect to suspicious hazardous compounds for the identification of toxicity drivers, and demonstrates the genotoxic potential of pollutants in the Danube.

A comparison of equilibrium and kinetic passive sampling for the monitoring of aquatic organic contaminants in German rivers

The performances of an equilibrium and a kinetic passive sampler for monitoring a range of organic contaminants (Log K_OW from -0.03 to 6.26) were evaluated in the effluent of a wastewater treatment plant, the receiving river Saar as well as the river Mosel in Germany. The polar organic chemical integrative sampler (POCIS) and a new mixed polymer sampler (MPS) were selected as kinetic and equilibrium passive samplers, respectively. Concentrations were described in terms of a time-weighted average concentration (C_TWA) from the POCIS measurements and as an equilibrium concentration from the MPS (C_Equil-MPS) and POCIS membrane (C_Equil-PES) analyses. Twenty-seven compounds could be detected, including eight priority substances of the EU Water Framework Directive. Both sampler types detected a similar range of compounds in the low ng/L to μg/L range, with a high proportion of pharmaceuticals being detected at all sampling sites. To account for uncertainty in the POCIS sampling rates, a range in C_TWA was estimated by applying low and high sampling rates. For the compounds that were detected in the POCIS this range was within a factor of 3.5. Interestingly, the MPS extracts showed lower ionisation artefacts than the POCIS extracts during the LC-MS/MS analysis. Finally, total water concentrations (C_Total) were estimated from the dissolved concentrations, literature organic carbon partition coefficients (K_OC) and the total organic carbon levels measured in the rivers. For the compounds in this study, negligible differences between C_Total and the passive sampler-derived dissolved concentrations were found with a maximum difference of 15% for diclofenac. Overall, this study demonstrated that the parallel application of kinetic and equilibrium passive samplers can improve the description of water quality.

Current EU research activities on combined exposure to multiple chemicals

Humans and wildlife are exposed to an intractably large number of different combinations of chemicals via food, water, air, consumer products, and other media and sources. This raises concerns about their impact on public and environmental health. The risk assessment of chemicals for regulatory purposes mainly relies on the assessment of individual chemicals. If exposure to multiple chemicals is considered in a legislative framework, it is usually limited to chemicals falling within this framework and co-exposure to chemicals that are covered by a different regulatory framework is often neglected. Methodologies and guidance for assessing risks from combined exposure to multiple chemicals have been developed for different regulatory sectors, however, a harmonised, consistent approach for performing mixture risk assessments and management across different regulatory sectors is lacking. At the time of this publication, several EU research projects are running, funded by the current European Research and Innovation Programme Horizon 2020 or the Seventh Framework Programme. They aim at addressing knowledge gaps and developing methodologies to better assess chemical mixtures, by generating and making available internal and external exposure data, developing models for exposure assessment, developing tools for in silico and in vitro effect assessment to be applied in a tiered framework and for grouping of chemicals, as well as developing joint epidemiological-toxicological approaches for mixture risk assessment and for prioritising mixtures of concern. The projects EDC-MixRisk, EuroMix, EUToxRisk, HBM4EU and SOLUTIONS have started an exchange between the consortia, European Commission Services and EU Agencies, in order to identify where new methodologies have become available and where remaining gaps need to be further addressed. This paper maps how the different projects contribute to the data needs and assessment methodologies and identifies remaining challenges to be further addressed for the assessment of chemical mixtures.

Identification of algal growth inhibitors in treated waste water using effect-directed analysis based on non-target screening techniques

Growth inhibition of freshwater microalga Pseudokirchneriella subcapitata caused by a waste water treatment plant (WWTP) effluent extract was investigated using an effect directed analysis (EDA) approach. The objective was to identify compounds responsible for the toxicity by combining state-of-the-art sampling, bioanalytical, fractionation and non-target screening techniques. Three fractionation steps of the whole extract were performed and bioactive fractions were analysed with GC (xGC)-MS and LC-HRMS. In total, 383 compounds were tentatively identified, and their toxicity was characterized using US EPA Ecotox database, open scientific literature or modelled by ECOSAR. Among the top-ranking drivers of toxicity were pesticides and their transformation products, pharmaceuticals (barbiturate derivatives and macrolide antibiotics e.g. azithromycin), industrial compounds or caffeine and its metabolites. Several of the top-ranking pesticides are no longer registered for use in plant protection products or biocides in the Czech Republic (e.g. prometryn, atrazine, acetochlor, resmethrin) and some are approved only for use in biocides (e.g. terbutryn, carbendazim, phenothrin), which indicates that their non-agricultural input into aquatic environment via WWTPs should be carefully considered. The study demonstrated a functional strategy of combining biotesting, fractionation and non-target screening techniques in the EDA study focused on the identification of algal growth inhibitors in WWTP effluent.

Effect-based trigger values for in vitro and in vivo bioassays performed on surface water extracts supporting the environmental quality standards (EQS) of the European Water Framework Directive

Effect-based methods including cell-based bioassays, reporter gene assays and whole-organism assays have been applied for decades in water quality monitoring and testing of enriched solid-phase extracts. There is no common EU-wide agreement on what level of bioassay response in water extracts is acceptable. At present, bioassay results are only benchmarked against each other but not against a consented measure of chemical water quality. The EU environmental quality standards (EQS) differentiate between acceptable and unacceptable surface water concentrations for individual chemicals but cannot capture the thousands of chemicals in water and their biological action as mixtures. We developed a method that reads across from existing EQS and includes additional mixture considerations with the goal that the derived effect-based trigger values (EBT) indicate acceptable risk for complex mixtures as they occur in surface water. Advantages and limitations of various approaches to read across from EQS are discussed and distilled to an algorithm that translates EQS into their corresponding bioanalytical equivalent concentrations (BEQ). The proposed EBT derivation method was applied to 48 in vitro bioassays with 32 of them having sufficient information to yield preliminary EBTs. To assess the practicability and robustness of the proposed approach, we compared the tentative EBTs with observed environmental effects. The proposed method only gives guidance on how to derive EBTs but does not propose final EBTs for implementation. The EBTs for some bioassays such as those for estrogenicity are already mature and could be implemented into regulation in the near future, while for others it will still take a few iterations until we can be confident of the power of the proposed EBTs to differentiate good from poor water quality with respect to chemical contamination.

Effect-directed analysis (EDA) of Danube River water sample receiving untreated municipal wastewater from Novi Sad, Serbia

The release of a multitude of pollutants from untreated municipal wastewater (UMWW) to surface waters may have adverse effects on aquatic wildlife including endocrine disruption. For effect-directed analysis (EDA), a Danube river water sample downstream of emission of UMWW in Novi Sad, Serbia was extracted on-site and after processing in the lab was subjected to reporter gene assays which revealed pronounced estrogenic (ERα), androgenic (AR) and oxidative stress response (OSR). The sample was fractionated with reversed-phase high performance liquid chromatography (RP-HPLC) collecting thirty fractions at two-minute intervals. Biological analysis identified 5 ERα- and 3 AR-active fractions while none of the fractions showed considerable activity with regards to OSR. It appeared that OSR of parent sample (PS) distributed over all fractions. Chemical analysis of active fractions by LC-MS/MS and LC-HRMS/MS found female reproductive hormones (estrone (E1), estradiol (E2), estriol (E3)) as cause of ERα activity while male reproductive hormones (testosterone, dihydrotestosterone (DHT)) and gestagens (progesterone and medroxyprogesterone) were active in the AR bioassay. Designed chemical mixtures in concentration ratios detected in the active fractions were tested with the bioassays. The identified chemicals quantitatively explained the observed bioactivity with no substantial contribution attributable to xenobiotics. In terms of bioanalytical equivalent concentrations (BEQs), detected chemicals explained 5-159% of ERα-active fraction's biological effect and 31-147% for AR-active fractions. Estradiol and dihydrotestosterone were the compounds dominating the most of the effect in this study. In summary, androgenic compounds were found to be as potent as estrogenic compounds while OSR was found to be the cumulative effect of the mixture of many compounds present in the sample rather than the mixture effect dominated by individual chemicals. The obtained results stress the importance of wastewater treatment plant (WWTP) to minimize the pollutant load from UMWW in order to reduce the risk of endocrine disruption to the aquatic life as well as to improve the status of receiving freshwater ecosystem.

Characterization and risk assessment of seasonal and weather dynamics in organic pollutant mixtures from discharge of a separate sewer system

Sites of wastewater discharge are hotspots for pollution of freshwaters with organic micropollutants and are often associated with adverse effects to aquatic organisms. The assessment, monitoring and managment of these hotspots is challenged by variations in the pollutant mixture composition due to season, weather conditions and random spills. In this study, we unraveled temporal exposure patterns in organic micropollutant mixtures from wastewater discharge and analyzed respective acute and sublethal risks for aquatic organisms. Samples were taken from two components of a separate sewer system i) a wastewater treatment plant (WWTP) and ii) a rain sewer of a medium size town as well as from the receiving river in different seasons. Rain sewer samples were separately collected for rain and dry - weather conditions. We analyzed 149 compounds by liquid chromatography-tandem mass spectrometry (LC-MS/MS). By considering the pollution dynamics in the point sources, we reduced the complexity of pollutant mixtures by k-means clustering to a few emission groups representing temporal and weather-related pollution patterns. From these groups, we derived biological quality element (BQE) - specific risk patterns. In most cases, one main risk driving emission group and a few individual risk driving compounds were identified for each BQE. While acute risk for fish was quite low, algae were exposed to seasonally emitted herbicides (terbuthylazine, spiroxamine) and crustaceans to randomly spilled insecticides (diazinon, dimethoate). Sublethal risks for all BQE were strongly influenced by constantly emitted pollutants, above all, pharmaceuticals. Variability of risks in the river was mainly driven by water discharge of the river rather than by season or peak events. Overall, the studied WWTP represented the major pollution source with a specific emission of agricultural compounds. However, the investigated rain sewer showed to be a constant pollution source due to illicit connections and was an important entry route for high loads of insecticides and biocides due to spills or incorrect disposal. By considering these pollution and risk dynamics, monitoring strategies may be optimized with a special focus on times of low flow conditions in the river, rain events and seasonally emitted risk drivers.

Comprehensive analysis of antagonistic endocrine activity during ozone treatment of hospital wastewater

To reduce the discharge of micropollutants, advanced wastewater treatment methods were investigated in the last years. Estrogenic effects were found to be reduced by ozonation. These activities are usually measured using genetically modified cell-based tests. As these bioassays are representing a sum parameter, also inhibitory effects such as antagonistic effects need to be further investigated as they are potentially reducing the detected activities. Therefore, a direct comparison of chemical target analysis and biological equivalent concentrations measured by bioassays is often difficult. To investigate the fate of antagonistic activities and their role in mixtures with agonistic activities, two hospital wastewater treatment plants were studied after different treatment steps. Thereby highly enriched samples were analyzed by a combination of bioassays with chemical target and non-target analyses. In order to achieve an in-depth characterization of the antagonistic activities a fractionation of the enriched samples was performed. To identify relevant compounds an effect directed identification approach was used by combining high-resolution mass spectrometry and bioassays. The results showed a high reduction for estrogene and androgene activities. However, a constant antagonistic activity after membrane bioreactor and ozone treatment was observed. A reduction of the antagonistic activity was observed after passing an activated carbon filter. The fractionation approach showed a specific finger-print of each sample of the different treatment steps. Hereby we could show that the composition of agonistic and antagonistic active compounds is changing after each treatment step while the overall measured activity stays the same. Using fractionation and the combination of bioassays the number of relevant features detected by chemical non-target screening could be reduced by >85%. As a result the phosphorous flame retardant TCEP could be identified as anti-estrogene active. Future research should be done to identify more antagonistic active compounds and potentially active transformation products after ozone treatment.

Solid-phase extraction as sample preparation of water samples for cell-based and other in vitro bioassays

In vitro bioassays are increasingly used for water quality monitoring. Surface water samples often need to be enriched to observe an effect and solid-phase extraction (SPE) is commonly applied for this purpose. The applied methods are typically optimised for the recovery of target chemicals and not for effect recovery for bioassays. A review of the few studies that have evaluated SPE recovery for bioassays showed a lack of experimentally determined recoveries. Therefore, we systematically measured effect recovery of a mixture of 579 organic chemicals covering a wide range of physicochemical properties that were spiked into a pristine water sample and extracted using large volume solid-phase extraction (LVSPE). Assays indicative of activation of xenobiotic metabolism, hormone receptor-mediated effects and adaptive stress responses were applied, with non-specific effects determined through cytotoxicity measurements. Overall, effect recovery was found to be similar to chemical recovery for the majority of bioassays and LVSPE blanks had no effect. Multi-layer SPE exhibited greater recovery of spiked chemicals compared to LVSPE, but the blanks triggered cytotoxicity at high enrichment. Chemical recovery data together with single chemical effect data were used to retrospectively estimate with reverse recovery modelling that there was typically less than 30% effect loss expected due to reduced SPE recovery in published surface water monitoring studies. The combination of targeted experiments and mixture modelling clearly shows the utility of SPE as a sample preparation method for surface water samples, but also emphasizes the need for adequate controls when extraction methods are adapted from chemical analysis workflows.

Towards a holistic and solution-oriented monitoring of chemical status of European water bodies: how to support the EU strategy for a non-toxic environment?

The definition of priority substances (PS) according to the Water Framework Directive (WFD) helped to remove many of these chemicals from the market and to reduce their concentrations in the European water bodies. However, it could not prevent that many of these chemicals have been replaced by others with similar risks. Today, monitoring of the PS-based chemical status according to WFD covers only a tiny fraction of toxic risks, extensively ignores mixture effects and lacks incentives and guidance for abatement. Thus, we suggest complement this purely status-related approach with more holistic and solution-oriented monitoring, which at the same time helps to provide links to the ecological status. Major elements include (1) advanced chemical screening techniques supporting mixture risk assessment and unraveling of source-related patterns in complex mixtures, (2) effect-based monitoring for the detection of groups of chemicals with similar effects and the establishment of toxicity fingerprints, (3) effect-directed analysis of drivers of toxicity and (4) to translate chemical and toxicological fingerprints into chemical footprints for prioritization of management measures. The requirement of more holistic and solution-oriented monitoring of chemical contamination is supported by the significant advancement of appropriate monitoring tools within the last years. Non-target screening technology, effect-based monitoring and basic understanding of mixture assessment are available conceptually and in research but also increasingly find their way into practical monitoring. Substantial progress in the development, evaluation and demonstration of these tools, for example, in the SOLUTIONS project enhanced their acceptability. Further advancement, integration and demonstration, extensive data exchange and closure of remaining knowledge gaps are suggested as high priority research needs for the next future to bridge the gap between insufficient ecological status and cost-efficient abatement measures.

Effect-based assessment of toxicity removal during wastewater treatment

Wastewaters contain complex mixtures of chemicals, which can cause adverse toxic effects in the receiving environment. In the present study, the toxicity removal during wastewater treatment at seven municipal wastewater treatment plants (WWTPs) was investigated using an effect-based approach. A battery of eight bioassays was applied comprising of cytotoxicity, genotoxicity, endocrine disruption and fish embryo toxicity assays. Human cell-based CALUX assays, transgenic larval models and the fish embryo toxicity test were particularly sensitive to WWTP effluents. The results indicate that most effects were significantly reduced or completely removed during wastewater treatment (76-100%), while embryo toxicity, estrogenic activity and thyroid disruption were still detectable in the effluents suggesting that some harmful substances remain after treatment. The responsiveness of the bioassays was compared and the human cell-based CALUX assays showed highest responsiveness in the samples. Additionally, the fish embryo toxicity test and the transgenic larval models for endocrine disrupting effects showed high responsiveness at low sample concentrations in nearly all of the effluent samples. The results showed a similar effect pattern among all WWTPs investigated, indicating that the wastewater composition could be rather similar at different locations. There were no considerable differences in the toxicity removal efficiencies of the treatment plants and no correlation was observed with WWTP characteristics, such as process configuration or sludge age. This study demonstrated that a biotest battery comprising of multiple endpoints can serve as a powerful tool when assessing water quality or water treatment efficiency in a holistic manner. Rather than analyzing the concentrations of a few selected chemicals, bioassays can be used to complement traditional methods of monitoring in the future by assessing sum-parameter based effects, such as mixture effects, and tackling chemicals that are present at concentrations below chemical analytical detection limits.

European demonstration program on the effect-based and chemical identification and monitoring of organic pollutants in European surface waters

Growing concern about the adverse environmental and human health effects of a wide range of micropollutants requires the development of novel tools and approaches to enable holistic monitoring of their occurrence, fate and effects in the aquatic environment. A European-wide demonstration program (EDP) for effect-based monitoring of micropollutants in surface waters was carried out within the Marie Curie Initial Training Network EDA-EMERGE. The main objectives of the EDP were to apply a simplified protocol for effect-directed analysis, to link biological effects to target compounds and to estimate their risk to aquatic biota. Onsite large volume solid phase extraction of 50 L of surface water was performed at 18 sampling sites in four European river basins. Extracts were subjected to effect-based analysis (toxicity to algae, fish embryo toxicity, neurotoxicity, (anti-)estrogenicity, (anti-)androgenicity, glucocorticoid activity and thyroid activity), to target analysis (151 organic micropollutants) and to nontarget screening. The most pronounced effects were estrogenicity, toxicity to algae and fish embryo toxicity. In most bioassays, major portions of the observed effects could not be explained by target compounds, especially in case of androgenicity, glucocorticoid activity and fish embryo toxicity. Estrone and nonylphenoxyacetic acid were identified as the strongest contributors to estrogenicity, while herbicides, with a minor contribution from other micropollutants, were linked to the observed toxicity to algae. Fipronil and nonylphenol were partially responsible for the fish embryo toxicity. Within the EDP, 21 target compounds were prioritized on the basis of their frequency and extent of exceedance of predicted no effect concentrations. The EDP priority list included 6 compounds, which are already addressed by European legislation, and 15 micropollutants that may be important for future monitoring of surface waters. The study presents a novel simplified protocol for effect-based monitoring and draws a comprehensive picture of the surface water status across Europe.