Plastics in the North Atlantic garbage patch: A boat-microbe for hitchhikers and plastic degraders

Discovery of potentially degrading microflora of different types of plastics based on long-term in-situ incubation in the deep sea

Plastic waste that ends up in the deep sea is becoming an increasing concern. However, it remains unclear whether there is any microflora capable of degrading plastic within this vast ecosystem. In this study, we investigated the bacterial communities associated with different types of plastic-polyamide-nylon 4, 6 (PA), polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS)-after one year of in situ incubation in the pelagic deep sea of the Western Pacific. The study was conducted via a submarine mooring system, anchored at four sites with water depths ranging from 1167 to 1735 m in an area of seamounts. High-throughput 16S rRNA gene sequencing revealed distinct bacterial diversities associated with specific plastic types and locations. The family Gordoniaceae was enriched by PS and PE plastics, while the abundance of Methyloligellaceae was significantly increased in the presence of PET. In the case of PA, Bdellovibrionaceae was enriched. Additionally, all plastic types promoted the relative abundance of Rhodobacteraceae and Sulfurimonadaceae families. Plastics appeared to stimulate bacterial communities involved in nitrate and sulfur cycling in seawater, suggesting that nitrogen and sulfur potentially play significant roles in plastic degradation in deep-sea environments. The dominant family Kordiimonadaceae was identified as a significantly different taxon in non-plastic seawater. Furthermore, the addition of plastics enhanced negative interactions among the bacterial communities in the surrounding seawater, with Proteobacteria and Bdellovibrionota selected for the core microbiome. Overall, this in situ deep-sea incubation revealed the response of indigenous microflora to man-made polymeric materials and highlighted the bacterial communities that may be involved in plastic degradation in oceanic areas.

Polycaprolactam microplastics reduce allelopathic potential of Iris pseudacorus via toxic effects on stimulatory bacteria

Many studies have investigated the toxic effects of microplastics (MPs) ingested by aquatic animals, but the effects of MPs that adhere to the roots of macrophytes require further exploration. Thus, the present study investigated the dose-dependent toxic effects of adding 10-500 mg/kg of polycaprolactam microplastics (PCM) on allelopathic cyanobacterial inhibition by a wetland macrophyte due to the influence on rhizosphere bacteria in a pot trial. First, comparisons of sterilized and unsterilized Iris pseudacorus rhizosphere soil showed that the unsterilized soil could enhance the root activity and allelopathic inhibition of Microcystis aeruginosa cyanobacteria. Furthermore, adding 50-100 mg/kg PCM to the unsterilized soil significantly altered the abundances of many types of bacteria, and decreased the root activity and bacterial biodiversity in the rhizosphere. Importantly, PCM changed the secondary metabolites profile in the roots, as well as decreasing production of the allelochemical palmitic acid and the allelopathic potential of I. pseudacorus. Moreover, a dominant strain of functional bacterium AAP51 was identified as an allelopathic promoter, isolated, and successfully inoculated into the sterilized soil. The decomposition of PCM produced the toxic monomer caprolactam in the rhizosphere soil at an average rate of 0.067 mg/kg·d under treatment with 50 mg/kg PCM. Toxicological testing showed that 5 mg/kg caprolactam inhibited the activities of the dominant bacteria and expression of the allelopathic gene FAD2 to weaken the allelopathic effect of I. pseudacorus. Thus, the findings obtained in this study indicate that PCM inhibited the allelopathic potential of the macrophyte due to the release of toxic caprolactam damaging bacteria in the rhizosphere. Consequently, it is necessary to remove MP pollutants from aquatic ecosystems in order to maintain the strong allelopathic potential of macrophytes and efficiently control cyanobacterial blooms.

Harmful impacts of microplastic pollution on poultry and biodegradation techniques using microorganisms for consumer health protection: A review

Microplastics (MPs) are small plastic particles less than five millimeters in size. Microplastic pollution poses a serious threat to ecosystems, affecting both biotic and abiotic components. Current techniques used to eliminate microplastics include recycling, landfilling, incineration, and biodegradation. Microplastics have been detected in various animal species, including poultry, fish, mammals, and invertebrates, indicating widespread exposure and potential bioaccumulation. In the Middle East, MPs contamination was discovered in chicken purchased from food shops, chain supermarkets, and open markets. The contamination levels ranged from 0.03±0.04 to 1.19±0.72 particles per gram of chicken meat. In poultry, microplastics negatively affect production and harm vital organs such as the kidneys, spleen, and lungs. In humans, exposure to microplastics can lead to inflammation, immune responses, metabolic disturbances, DNA damage, neurological damage, and even cancer upon contact with mucosal membranes or absorption into the body. Several studies have explored the use of microorganisms, including bacteria, fungi, and algae, to degrade microplastics, offering an economical and environmentally friendly solution. Different polymers were cultured with strains of Bacillus spp. (SB-14 and SC-9) and Streptococcus spp. (SC-56) for a duration of 40 days. Degradation rates for LDPE were 11.8 %, 4.8 %, and 9.8 %. The rates of deterioration for HDPE were 11.7 %, 3.8 %, and 13.7 %. Rates for polyester beads were 17.3 %, 9.4 %, and 5.8 %. This review focuses on the effects of microorganisms in removing microplastic pollution, the detrimental impact of microplastics on poultry production, and the connection between microplastic pollution and human health.

Comparative analysis of the microbial plastisphere at three sites along the Sarno river (Italy)

This study investigated microplastics (MP) and their associated microbial plastisphere in the Sarno river (Italy), its estuary and in the nearby coastal area in January 2020. Scanning Electron Microscopy (SEM), High Throughput Sequencing (HTS) and Fourier-Transformed Infrared Spectroscopy (FTIR) were used to characterize the collected MPs and their associated microbes. The three stations sampled differed substantially for MP concentrations and microbial communities, with the estuarine station showing very high MP concentrations (2048.6 MP m-3), highlighting the threat represented by the river for the coastal marine area and its ecosystem. The prokaryotic plastisphere showed differences between the three stations sampled, in terms of community composition, with only 75 Amplicon Sequence Variants (ASV) in common. The Comamonadaceae was the most abundant family in MP-attached and freshwater communities, and this lifestyle seems to be pivotal in the colonization of new habitats while flowing towards the sea. The results highlight the importance of the plastisphere in colonization of new habitats and support the need of correct management and risk mitigation efforts.

Insights into the interactions of plant-associated bacteria and their role in the transfer of antibiotic resistance genes from soil to plant

This study discussed the role of plant-associated microbiome in regulating ARG transfer in soil-plant systems. Results showed that target ARGs in plants were mainly derived from rhizosphere soil. Cooperative interactions among bacteria in rhizosphere soil, plant-roots, plant-shoots, and soil-roots-shoots systems occurred during ARG transfer. The number of modules and keystone taxa identified as positively correlated with ARG transfer in rhizosphere soil, roots, and shoots was 3 and 49, 3 and 41, 2 and 5, respectively. Among these modules, module 3 in roots was significantly positively correlated with module 3 in rhizosphere soils and module 2 in shoots, indicating that module 3 in roots played central hub roles in ARG transfer from rhizosphere soil to roost and shoots. This may be because module 3 in roots increased cell motility and xenobiotics biodegradation and metabolism. These keystone taxa mainly belonged to Proteobacteria that can carry ARGs to transfer in soil-plant systems, especially Clostridium-sensu_stricito and Pseudomonas in rhizosphere soil carried ARGs into the shoot. Additionally, they promoted ARG transfer by increasing plant biomass, net photosynthetic rate and water use efficiency. The findings helped reveal the mechanism of plant-associated bacterial interactions and provided understanding for potential risks of ARG transfer from soil to plants.

Wet-dry or freeze-thaw alternation can regulate the impacts of farmland plastic pollution on soil bacterial communities and functions

The persistence of farmland plastic pollution has raised significant concerns regarding its potential long-term impacts on soil health in the context of global climate change. However, there are still gaps in the understanding of the impacts of plastic residues on soil microbial communities and functions in agricultural environments under unstable and extreme climatic conditions. In this study, the effects of plastic residues (two types and three shapes) on farmland soil bacterial communities and functions across varying environmental conditions were investigated through microscopic experiments. The results revealed that plastic residues subjected to wet-dry or freeze-thaw alternations exhibited greater degradation compared to those under natural conditions. The effects of plastic residue types and shapes on soil bacterial diversity and function were regulated by environmental factors. The plastic residues significantly reduced the stability of the bacterial network under natural condition (P < 0.05), whereas the opposite phenomenon was observed under wet-dry or freeze-thaw alternating conditions. Compared to under natural condition, lower numbers of bacterial functional pathways exhibiting significant differences due to plastic residues were observed under wet-dry or freeze-thaw alternating conditions. Significant associations were observed between soil bacterial communities and functions and various soil physicochemical properties under natural conditions (P < 0.05), and most of these associations were attenuated in the wet-dry or freeze-thaw alternations. This study demonstrated the potential impacts of plastic pollution on farmland soil microbiomes, which could be modulated by both residue characteristics and climatic conditions. Specifically, extreme environments could mitigate plastic-pollution-driven influences on soil microbiomes.

The role of marine bacteria in modulating the environmental impact of heavy metals, microplastics, and pesticides: a comprehensive review

Bacteria assume a pivotal role in mitigating environmental issues associated with heavy metals, microplastics, and pesticides. Within the domain of heavy metals, bacteria exhibit a wide range of processes for bioremediation, encompassing biosorption, bioaccumulation, and biotransformation. Toxigenic metal ions can be effectively sequestered, transformed, and immobilized, hence reducing their adverse environmental effects. Furthermore, bacteria are increasingly recognized as significant contributors to the process of biodegradation of microplastics, which are becoming increasingly prevalent as contaminants in marine environments. These microbial communities play a crucial role in the colonization, depolymerization, and assimilation processes of microplastic polymers, hence contributing to their eventual mineralization. In the realm of pesticides, bacteria play a significant role in the advancement of environmentally sustainable biopesticides and the biodegradation of synthetic pesticides, thereby mitigating their environmentally persistent nature and associated detrimental effects. Gaining a comprehensive understanding of the intricate dynamics between bacteria and anthropogenic contaminants is of paramount importance in the pursuit of technologically advanced and environmentally sustainable management approaches.

Density and distribution patterns of seafloor macrolitter in the eastern Red Sea

The constant production of plastic and incessant growth of waste pollution continues to alter the marine environment from the coasts and surface waters to the deep sea. The quantification and investigation of macrolitter on the vast seabed of the ocean are challenging tasks that must be undertaken to elucidate the impact of anthropogenic activity on the marine environment and facilitate subsequent implementation of legally binding waste management regulations. In this study, we analyzed >60,000 images collected during 84 dives surveying 62.1 km of seabed in the eastern Red Sea to quantify the abundance and density of seafloor macrolitter. The surveyed depth of the seabed varied between 35 and 2415 m, and litter was observed at depths ranging from 93 to 2415 m. The litter density varied between 0 and 73,798 items km-2, with the mean (± SE) and median densities of 4069 ± 1188 and 1371 items km-2, respectively. Plastic was the main litter category, comprising 46 % of all litter. The density of litter was higher at deeper depths (>1400 m) and increased significantly at distances farther from the shore. The results of this study suggest that maritime traffic and the possible direct litter discharge from vessels are the main anthropogenic sources of seafloor litter in the eastern Red Sea. Thus, we emphasize the urgency of conservation efforts and strict waste regulations to preserve the marine ecosystem of the Red Sea.

Impacts of polyhydroxybutyrate (PHB) microplastic exposure on physiology and metabolic profiles of Litopenaeus vannamei

In light of increasing concerns about microplastic pollution, it is crucial to understand the biological impacts of biodegradable PHB microplastics on marine organisms. This study included a 96-h exposure experiment to assess acute toxicity at PHB concentrations of 0 mg/L, 100 mg/L, 500 mg/L and 1000 mg/L. Additionally, a 60-day feeding trial was conducted with PHB concentrations of 0, 0.5, 1.0 and 2.0 g/kg to evaluate the long-term effects on growth, physiological health and metabolic responses of Litopenaeus vannamei. Results from the exposure experiment indicated that PHB microplastics up to 100 mg/L were non-toxic to shrimp. However, the 60-day feeding trial revealed that higher concentrations led to slight reductions in survival rates and growth performance, indicating a concentration-dependent response. Analysis of antioxidant and immune enzymes showed minimal changes across most parameters. However, increases in malondialdehyde content and lysozyme activity at higher PHB levels suggested a stress response. Microbial analysis indicated higher species richness and greater community diversity in the PHB group compared to controls, as evidenced by Chao1, ACE, Shannon and Simpson indices. Linear discriminant analysis revealed that Enterobacteriales and related taxa were more prevalent in the PHB group, while Rhodobacteraceae and associated taxa dominated the control group. Pathway analysis highlighted enhanced signal transduction, cell mobility and metabolic resource reallocation in response to PHB-induced stress. Integrated transcriptomic and metabolomic analyses revealed significant regulatory changes, especially in lipid metabolism pathways. These findings suggest that while PHB microplastics trigger adaptive metabolic responses in shrimp, they do not cause acute toxicity. Significant variations in intestinal microbiome composition reflect potential shifts in gut health dynamics due to PHB ingestion. This study enhances our understanding of the ecological impacts of microplastics and underscores the necessity for further research into the environmental safety of biodegradable alternatives.

Sources, interactions, influencing factors and ecological risks of microplastics and antibiotic resistance genes in soil: A review

Microplastics (MPs) and antibiotic resistance genes (ARGs) are gaining increasing attention as they pose a threat to the ecological environment and human health as emerging contaminants. MPs has been proved to be a hot spot in ARGs, and although it has been extensively studied in water environment, the results of bibliometrics statistical analysis in this paper showed that relevant studies in soil ecological environment are currently in the initial stage. In view of this, the paper provides a systematic review of the sources, interactions, influencing factors, and ecological risks associated with MPs and ARGs in soil environments. Additionally, the mechanism and influencing factors of plastisphere formation and resistance are elaborated in detail. The MPs properties, soil physicochemical properties, soil environmental factors and agricultural activities are the primarily factors affecting the interaction between MPs and ARGs in soil. Challenges and development directions of related research in the future are also prospected. It is hoped that the review could assist in a deeper comprehension and exploration of the interaction mechanism between MPs and ARGs in soil as well as the function of MPs in the transmission process of ARGs among diverse environmental media and organisms, and provide theory basis and reference for the MPs and ARGs pollution control and remediation in soil.

Environmental factors control microbial colonization of plastics in the North Sea

Large quantities of plastic enter the oceans each year providing extensive attachment surfaces for marine microbes yet understanding their interactions and colonization of plastic debris remains limited. We investigated microbial colonization of various plastic types (polyethylene, polystyrene, polyethylene-terephthalate, and nylon) in ex-situ incubation experiments. Plastic films, both UV-pretreated and untreated, were exposed to seawater from a coastal and an offshore location in the North Sea. 16S rRNA amplicon sequencing was employed to assess microbial community structures after 5, 10, 30, and 45 days of incubation. Our findings show the significant influence of time, seawater origin and plastic type on microbial community succession. We also identified several genera associated with hydrocarbon or plastic degradation potential as well as genera selecting for specific plastics such as Ketobacter and Microbacterium. Our results highlight potential role of microorganisms in plastic biodegradation and support the idea that microbial colonizers on marine plastics debris seemingly select distinct substrate types.

Plastic debris mediates bacterial community coalescence by breaking dispersal limitation in the sediments of a large river

Plastic debris has recently been proposed as a novel habitat for bacterial colonization, which can raise perturbations in bacterial ecology after burial in riverine sediments. However, community coalescence, as a prevalent process involving the interrelationships of multiple communities and their surrounding environments, has been rarely discussed to reveal the impact of the plastisphere on sedimentary bacterial community. This study analyzed the bacterial community in plastic debris and sediment along the Nujiang River, elucidating the role of the plastisphere in mediating community coalescence in sediments. Our results demonstrated that the plastisphere and sedimentary bacterial communities exhibited distinct biogeography along the river (r = 0.694, p < 0.01). Based on overlapped taxa and SourceTracker, the extent of coalescence between adjacent communities was in following orders: plastic-plastic (0.589) > plastic-sediment (0.561) > sediment-sediment (0.496), indicating the plastisphere promoted bacterial community coalescence along the river. Flow velocity and geographic distance were the major factors driving the plastisphere changes, suggesting that the plastisphere were vulnerable to dispersal. The null model and the neutral model provided additional support for the higher immigration ability of the plastisphere to overcome dispersal limitation, highlighting the potential importance of the plastisphere in community coalescence. Network analysis indicated the critical role of keystone species (Proteobacteria, Bacteroidetes, and Gemmatimonadetes) in mediating the coalescence between sedimentary bacterial community and the plastisphere. In summary, the plastisphere could mediate the coalescence of bacterial communities by overcoming dispersal limitation, which provides new perspectives on the plastisphere altering bacterial ecology in riverine sediments.

Impact of microplastics on microbial community structure in the Qiantang river: A potential source of N2O emissions

This study aimed to investigate the spatial distribution of microplastics (MPs) and the features of the bacterial community in the Qiantang River urban river. Surface water samples from the Qiantang River were analyzed for this purpose. The results of the 16S high-throughput sequencing indicated that the microbial community diversity of MPs was significantly lower than in natural water but higher than in natural substrates. The biofilm of MPs was mainly composed of Enterobacteriaceae (28.00%), Bacillaceae (16.25%), and Phormidiaceae (6.75%). The biodiversity on MPs, natural water, and natural substrates varied significantly and was influenced by seasonal factors. In addition, the presence of MPs hindered the denitrification process in the aquatic environment and intensified N2O emission when the nitrate concentration was higher than normal. In particular, polyethylene terephthalate (PET) exhibited a 12% residue of NO3--N and a 4.2% accumulation of N2O after a duration of 48 h. Further findings on gene abundance and cell viability provided further confirmation that PET had a considerable impact on reducing the expression of nirS (by 0.34-fold) and nosZ (by 0.53-fold), hence impeding the generation of nicotinamide adenine dinucleotide (NADH) (by 0.79-fold). Notably, all MPs demonstrated higher the nirK gene abundances than the nirS gene, which could account for the significant accumulation of N2O. The results suggest that MPs can serve as a novel carrier substrate for microbial communities and as a potential promoter of N2O emission in aquatic environments.

Evidence of size-dependent toxicity of polystyrene nano- and microplastics in sea cucumber Apostichopus japonicus (Selenka, 1867) during the intestinal regeneration

Microplastics are ubiquitous pollutants in the global marine environment. However, few studies have adequately explored the different toxic mechanisms of microplastics (MPs) and nanoplastics (NPs) in aquatic organisms. The sea cucumber, Apostichopus japonicus, is a key organism in the marine benthic ecosystem due to its crucial roles in biogeochemical cycles and food web. This study investigated the bioaccumulation and adverse effects of polystyrene micro- and nanoplastics (PS-M/NPs) of different sizes (20 μm, 1 μm and 80 nm) in the regenerated intestine of A. japonicus using multi-omics analysis. The results showed that after 30-day exposure at the concentration of 0.1 mg L-1, PS-MPs and PS-NPs accumulated to 155.41-175.04 μg g-1 and 337.95 μg g-1, respectively. This excessive accumulation led to increased levels of antioxidases (SOD, CAT, GPx and T-AOC) and reduced activities of immune enzymes (AKP, ACP and T-NOS), indicating oxidative damage and compromised immunity in the regenerated intestine. PS-NPs had more profound negative impacts on cell proliferation and differentiation compared to PS-MPs. Transcriptomic analysis revealed that PS-NPs primarily affected pathways related to cellular components, e.g., ribosome, and oxidative phosphorylation. In comparison, PS-MPs had greater influences on actin-related organization and organic compound metabolism. In the PS-M/NPs-treated groups, differentially expressed metabolites were mainly amino acids, fatty acids, glycerol phospholipid, and purine nucleosides. Additionally, microbial community reconstruction in the regenerated intestine was severely disrupted by the presence of PS-M/NPs. In the PS-NPs group, Burkholderiaceae abundance significantly increased while Rhodobacteraceae abundance decreased. Correlation analyses demonstrated that intestinal regeneration of A. japonicus was closely linked to its enteric microorganisms. These microbiota-host interactions were notably affected by different PS-M/NPs, with PS-NPs exposure causing the most remarkable disruption of mutual symbiosis. The multi-omic approaches used here provide novel insights into the size-dependent toxicity of PS-M/NPs and highlight their detrimental effects on invertebrates in M/NPs-polluted marine benthic ecosystems.

Phototrophs as the central components of the plastisphere microbiome in coastal environments

Upon entering the marine environment, plastics are colonized by a plethora of microorganisms to form a plastisphere, influencing the fate and transport of the plastic debris and the health of marine ecosystems. The assembly of marine plastisphere is generally believed to be dominated by stochastic processes. However, it remains elusive whether microbial interaction in the assembly of plastisphere microbial communities is conserved or not. We analyzed the plastisphere microbiomes of 137 plastic debris samples from intertidal zones at different geographical locations and habitats (seagrass, coral, mangrove, beach, and open ocean) and compared them with the surrounding sediment and seawater microbiomes. Microbial community structures of the plastisphere from different locations were more similar to each other but differed substantially from the surrounding sediment and water microbiomes, implying a common mechanism of plastisphere assembly. We used different machine learning algorithms (Multinomial Logistic Regression, Support Vector Machine, Decision Trees, Random Forest, and Artificial Neural Networks) to classify plastic debris samples with high sensitivity based on the microbiome composition. Eukaryotic and prokaryotic phototrophic organisms such as green algae, diatoms, and cyanobacteria, were found to be enriched on the plastic surfaces. Network analysis revealed the central role of the phototrophic organisms in the formation and sustenance of the plastispheres. We found that phototrophs served as core members interacting strongly with heterotrophic organisms in marine plastisphere, irrespective of the sampling location, habitats, and polymer types. This would explain the stochastic assembly of the plastisphere along with conserved properties driven by the phototrophs in the surrounding environment. Our results highlight the importance of phototrophic organisms in shaping the marine plastisphere microbial communities.

Untargeted metabolomic insights into plastisphere communities in European rivers

Every year, rivers introduce a staggering amount of hundred kilotons of plastic into the Oceans. This plastic is inhabited by microorganisms known as the plastisphere, which can be transferred between different ecosystems through the transport of microplastics. Here, we simulated the microbial colonization of polyethylene-based plastic pellets that are classically used to manufacture large-scale plastic products. The pellets were immersed for 1 month in four to five sampling stations along the river-to-sea continuum of nine of the major European rivers. This study presents the first untargeted metabolomics analysis of the plastisphere, by using ultra high-performance liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-HRMS). The plastisphere metabolomes were similar in the Rhine and Rhone rivers, while being different from the Tiber and Loire rivers, which showed greater similarity to the Thames and Seine rivers. Interestingly, we found a clear distinction between plastisphere metabolomes from freshwater and marine water in most of the river-to-sea continuum, thus suggesting a complete segregation in plastisphere metabolites that is not consistent with a major transfer of microorganisms between the two contrasted ecosystems. Putative annotations of 189 discriminating metabolites suggested that lipid metabolism was significantly modulated. These results enlightened the relevance of using environmental metabolomic as complementary analysis to the current OMICs analysis.

Changes in Soil Microbial Communities Induced by Biodegradable and Polyethylene Mulch Residues Under Three Different Temperatures

Mulching is a common method increasing crop yield and achieving out-of-season production; nevertheless, their removal poses a significant environmental danger. In this scenario, the use of biodegradable plastic mulches comes up as a solution to increase the sustainability of this practice, as they can be tilled in soil without risk for the environment. In this context, it is important to study the microbial response to this practice, considering their direct involvement in plastic biodegradation. This study evaluated the biodegradation of three commercial mulch residues: one conventional non-biodegradable mulch versus two biodegradable ones (white and black compostable Mater-Bi mulches). The experiment was conducted under three incubation temperatures (room temperature 20-25 °C, 30 °C, and 45 °C) for a 6-month trial using fallow agricultural soil. Soil without plastic mulch residues was used as a control. White mater-bi biodegradable mulch residues showed higher degradation rates up to 88.90% at 30 °C, and up to 69.15% at room temperature. Furthermore, incubation at 45 °C determines the absence of degradation for all types of mulch considered. Moreover, bacterial alpha diversity was primarily influenced by plastic type and temperature, while fungal populations were mainly affected by temperature. Beta diversity was impacted by all experimental variables. Predicted functional genes crucial for degrading complex substrates, including those encoding hydrolases, cutinases, cellobiosidases, and lipases, were derived from 16S rRNA gene sequencing data. Cluster analysis based on predicted enzyme-encoding gene abundance revealed two clusters, mainly linked to sampling time. Finally, core microbiome analysis identified dominant bacterial and fungal taxa in various soil-plastic ecosystems during degradation, pinpointing species potentially involved in plastic breakdown. The present study allows an assessment of how different temperatures affect the degradation of mulch residues in soil, providing important insights for different climatic growing zones. It also fills a gap in the literature by directly comparing the effects of biodegradable and polyethylene mulches on soil microbial communities.

Bacterial Communities across Multiple Ecological Niches (Water, Sediment, Plastic, and Snail Gut) in Mangrove Habitats

Microbial composition across substrates in mangroves, particularly in the Middle East, remains unclear. This study characterized bacterial communities in sediment, water, Terebralia palustris snail guts, and plastic associated with Avicennia marina mangrove forests in two coastal lagoons in the Sea of Oman using 16S rDNA gene MiSeq sequencing. The genus Vibrio dominated all substrates except water. In the gut of snails, Vibrio is composed of 80-99% of all bacterial genera. The water samples showed a different pattern, with the genus Sunxiuqinia being dominant in both Sawadi (50.80%) and Qurum (49.29%) lagoons. There were significant differences in bacterial communities on different substrata, in particular plastic. Snail guts harbored the highest number of unique Operational Taxonomic Units (OTUs) in both lagoons, accounting for 30.97% OTUs in Sawadi and 28.91% OTUs in Qurum, compared to other substrates. Plastic in the polluted Sawadi lagoon with low salinity harbored distinct genera such as Vibrio, Aestuariibacter, Zunongwangia, and Jeotgalibacillus, which were absent in the Qurum lagoon with higher salinity and lower pollution. Sawadi lagoon exhibited higher species diversity in sediment and plastic substrates, while Qurum lagoon demonstrated lower species diversity. The principal component analysis (PCA) indicates that environmental factors such as salinity, pH, and nutrient levels significantly influence bacterial community composition across substrates. Variations in organic matter and potential anthropogenic influences, particularly from plastics, further shape bacterial communities. This study highlights the complex microbial communities in mangrove ecosystems, emphasizing the importance of considering multiple substrates in mangrove microbial ecology studies. The understanding of microbial dynamics and anthropogenic impacts is crucial for shaping effective conservation and management strategies in mangrove ecosystems, particularly in the face of environmental changes.

Biofilms on Plastic Debris and the Microbiome

Plastic pollution has become a global environmental problem, and the large number of microorganisms attached to plastic debris in the environment has become a hot topic due to their rapid response to pollutants and environmental changes. In this study, we used high-throughput sequencing to investigate the microbial community structure of and explore the metagenome in the biofilm of two types of plastic debris, polystyrene (PS) and polyethylene terephthalate (PET), and compared them with a water sample collected at the sampling site. The phylum Proteobacteria dominated both the PET and PS samples, at 93.43% and 65.95%, respectively. The metagenome data indicated that the biofilm is enriched with a number of hydrocarbon (petroleum, microplastics, etc.) degrading genes. Our results show that the type of plastic determined the bacterial community structure of the biofilm, while the environment had relatively little effect.

Polyethylene terephthalate (PET)-degrading bacteria in the pelagic deep-sea sediments of the Pacific Ocean

Polyethylene terephthalate (PET) plastic pollution is widely found in deep-sea sediments. Despite being an international environmental issue, it remains unclear whether PET can be degraded through bioremediation in the deep sea. Pelagic sediments obtained from 19 sites across a wide geographic range in the Pacific Ocean were used to screen for bacteria with PET degrading potential. Bacterial consortia that could grow on PET as the sole carbon and energy source were found in 10 of the 19 sites. These bacterial consortia showed PET removal rate of 1.8%-16.2% within two months, which was further confirmed by the decrease of carbonyl and aliphatic hydrocarbon groups using attenuated total reflectance-Fourier-transform infrared analysis (ATR-FTIR). Analysis of microbial diversity revealed that Alcanivorax and Pseudomonas were predominant in all 10 PET degrading consortia. Meanwhile, Thalassospira, Nitratireductor, Nocardioides, Muricauda, and Owenweeksia were also found to possess PET degradation potential. Metabolomic analysis showed that Alcanivorax sp. A02-7 and Pseudomonas sp. A09-2 could turn PET into mono-(2-hydroxyethyl) terephthalate (MHET) even in situ stimulation (40 MPa, 10 °C) conditions. These findings widen the currently knowledge of deep-sea PET biodegrading process with bacteria isolates and degrading mechanisms, and indicating that the marine environment is a source of biotechnologically promising bacterial isolates and enzymes.

Colonization and Biodegradation Potential of Fungal Communities on Immersed Polystyrene vs. Biodegradable Plastics: A Time Series Study in a Marina Environment

Plastic pollution of the ocean is a major environmental threat. In this context, a better understanding of the microorganisms able to colonize and potentially degrade these pollutants is of interest. This study explores the colonization and biodegradation potential of fungal communities on foamed polystyrene and alternatives biodegradable plastics immersed in a marina environment over time, using the Brest marina (France) as a model site. The methodology involved a combination of high-throughput 18S rRNA gene amplicon sequencing to investigate fungal taxa associated with plastics compared to the surrounding seawater, and a culture-dependent approach to isolate environmentally relevant fungi to further assess their capabilities to utilize polymers as carbon sources. Metabarcoding results highlighted the significant diversity of fungal communities associated with both foamed polystyrene and biodegradable plastics, revealing a dynamic colonization process influenced by the type of polymer and immersion time. Notably, the research suggests a potential for certain fungal species to utilize polymers as a carbon source, emphasizing the need for further exploration of fungal biodegradation potential and mechanisms.

A review focusing on mechanisms and ecological risks of enrichment and propagation of antibiotic resistance genes and mobile genetic elements by microplastic biofilms

Microplastics (MPs) are emerging ubiquitous pollutants in aquatic environment and have received extensive global attention. In addition to the traditional studies related to the toxicity of MPs and their carrier effects, their unique surface-induced biofilm formation also increases the ecotoxicity potential of MPs from multiple perspectives. In this review, the ecological risks of MPs biofilms were summarized and assessed in detail from several aspects, including the formation and factors affecting the development of MPs biofilms, the selective enrichment and propagation mechanisms of current pollution status of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) in MPs biofilms, the dominant bacterial communities in MPs biofilms, as well as the potential risks of ARGs and MGEs transferring from MPs biofilms to aquatic organisms. On this basis, this paper also put forward the inadequacy and prospects of the current research and revealed that the MGEs-mediated ARG propagation on MPs under actual environmental conditions and the ecological risk of the transmission of ARGs and MGEs to aquatic organisms and human beings are hot spots for future research. Relevant research from the perspective of MPs biofilm should be carried out as soon as possible to provide support for the ecological pollution prevention and control of MPs.

Biodegradable plastics in Mediterranean coastal environments feature contrasting microbial succession

Plastic pollution of the ocean is a top environmental concern. Biodegradable plastics present a potential "solution" in combating the accumulation of plastic pollution, and their production is currently increasing. While these polymers will contribute to the future plastic marine debris budget, very little is known still about the behavior of biodegradable plastics in different natural environments. In this study, we molecularly profiled entire microbial communities on laboratory confirmed biodegradable polybutylene sebacate-co-terephthalate (PBSeT) and polyhydroxybutyrate (PHB) films, and non-biodegradable conventional low-density polyethylene (LDPE) films that were incubated in situ in three different coastal environments in the Mediterranean Sea. Samples from a pelagic, benthic, and eulittoral habitat were taken at five timepoints during an incubation period of 22 months. We assessed the presence of potential biodegrading bacterial and fungal taxa and contrasted them against previously published in situ disintegration data of these polymers. Scanning electron microscopy imaging complemented our molecular data. Putative plastic degraders occurred in all environments, but there was no obvious "core" of shared plastic-specific microbes. While communities varied between polymers, the habitat predominantly selected for the underlying communities. Observed disintegration patterns did not necessarily match community patterns of putative plastic degraders.

Colonization characteristics and dynamic transition of archaea communities on polyethylene and polypropylene microplastics in the sediments of mangrove ecosystems

Microplastics are a growing concern in mangrove ecosystems; however, their effects on archaeal communities and related ecological processes remain unclear. We conducted in situ biofilm-enrichment experiments to investigate the ecological influence of polyethylene (PE) and polypropylene microplastics on archaeal communities in the sediments of mangrove ecosystems. The archaeal community present on microplastics was distinct from that of the surrounding sediments at an early stage but became increasingly similar over time. Bathyarchaeota, Thaumarchaeota, Euryarchaeota, and Asgardaeota were the most abundant phyla. Methanolobus, an archaeal biomarker, was enriched in PE biofilms, and significantly controlled by homogeneous selection in the plastisphere, indicating an increased potential risk of methane emission. The dominant archaeal assembly process in the sediments was deterministic (58.85%-70.47%), while that of the PE biofilm changed from stochastic to deterministic during the experiment. The network of PE plastispheres showed less complexity and competitive links, and higher modularity and stability than that of sediments. Functional prediction showed an increase in aerobic ammonia oxidation during the experiment, whereas methanogenesis and chemoheterotrophy were significantly higher in the plastisphere. This study provides novel insights into the impact of microplastic pollution on archaeal communities and their mediating ecological functions in mangrove ecosystems.

Exploring changes in microplastic-associated bacterial communities with time, location, and polymer type in Liusha Bay, China

Microplastics have become a widespread concern within marine environments and are particularly evident in aquaculture regions that are characterized by plastic accumulation. This study employed 16 S rDNA sequencing to investigate the dynamic succession of microbial communities colonizing polyvinyl chloride (PVC), polystyrene (PS), and polyamide (PA) microplastics in seawater, when subjected to varying exposure durations in the Liusha Bay aquaculture region. Results revealed that the composition of microplastics microbial communities varied remarkably across geographical locations and exposure times. With an increase in exposure duration, both the diversity and richness of bacterial communities colonizing microplastics significantly increased, microbial communities show adaptations to the plastisphere. The type of microplastics had a significant effect on the community structure characteristicsof bacteria attached to their surfaces, with inconsistent trends in the relative abundance of different genera on different substrates. Notably, microplastic surfaces harbored a significant abundance of hydrocarbon-degrading bacteria, exemplified by Erythrobacter. These findings underscore the potential of microplastics as unique microbial niches. Meanwhile, long-term exposure experiments also offer the possibility of screening for plastic-degrading bacteria. In addition, the presence of the pathogenic bacterium Vibrio was detected in all microplastic samples, implying that microplastics could serve as carriers for pathogenic dissemination. This underscores the urgency of addressing the risk posed by the proliferation of harmful bacteria on microplastic surfaces. Overall, this study enhances our understanding of microbial community dynamics on microplastics under diverse conditions. It contributes to the broader comprehension of plastisphere microbial ecosystems in the marine environment, thereby addressing critical environmental implications.

Diversity of marine bacteria growing on leachates from virgin and weathered plastic: Insights into potential degraders

Plastic debris in the ocean releases chemical compounds that can be toxic to marine fauna. It was recently found that some marine bacteria can degrade such leachates, but information on the diversity of these bacteria is mostly lacking. In this study, we analysed the bacterial diversity growing on leachates from new low-density polyethylene (LDPE) and a mix of naturally weathered plastic, collected from beach sand. We used a combination of Catalysed Reporter Deposition-Fluorescence In Situ Hybridization (CARD-FISH), BioOrthogonal Non-Canonical Amino acid Tagging (BONCAT), and 16S rRNA gene amplicon sequencing to analyse bacterioplankton-groups specific activity responses and the identity of the responsive taxa to plastic leachates produced under irradiated and non-irradiated conditions. We found that some generalist taxa responded to all leachates, most of them belonging to the Alteromonadales, Oceanospirillales, Nitrosococcales, Rhodobacterales, and Sphingomonadales orders. However, there were also non-generalist taxa responding to specific irradiated and non-irradiated leachates. Our results provide information about bacterial taxa that could be potentially used to degrade the chemicals released during plastic degradation into seawater contributing to its bioremediation.

Plastic and terrestrial organic matter degradation by the humic lake microbiome continues throughout the seasons

Boreal freshwaters go through four seasons, however, studies about the decomposition of terrestrial and plastic compounds often focus only on summer. We compared microbial decomposition of 13C-polyethylene, 13C-polystyrene, and 13C-plant litter (Typha latifolia) by determining the biochemical fate of the substrate carbon and identified the microbial decomposer taxa in humic lake waters in four seasons. For the first time, the annual decomposition rate including separated seasonal variation was calculated for microplastics and plant litter in the freshwater system. Polyethylene decomposition was not detected, whereas polystyrene and plant litter were degraded in all seasons. In winter, decomposition rates of polystyrene and plant litter were fivefold and fourfold slower than in summer, respectively. Carbon from each substrate was mainly respired in all seasons. Plant litter was utilized efficiently by various microbial groups, whereas polystyrene decomposition was limited to Alpha- and Gammaproteobacteria. The decomposition was not restricted only to the growth season, highlighting that the decomposition of both labile organic matter and extremely recalcitrant microplastics continues throughout the seasons.

Niche partitioning and plastisphere core microbiomes in the two most plastic polluted zones of the world ocean

Plastics are offering a new niche for microorganisms colonizing their surface, the so-called "plastisphere," in which diversity and community structure remain to be characterized and compared across ocean pelagic regions. Here, we compared the bacterial diversity of microorganisms living on plastic marine debris (PMD) and the surrounding free-living (FL) and organic particle-attached (PA) lifestyles sampled during the Tara expeditions in two of the most plastic polluted zones in the world ocean, i.e., the North Pacific gyre and the Mediterranean Sea. The 16S rRNA gene sequencing analysis confirmed that PMD are a new anthropogenic ocean habitat for marine microbes at the ocean-basin-scale, with clear niche partitioning compared to FL and PA lifestyles. At an ocean-basin-scale, the composition of the plastisphere communities was mainly driven by environmental selection, rather than polymer types or dispersal effect. A plastisphere "core microbiome" could be identified, mainly dominated by Rhodobacteraceae and Cyanobacteria. Predicted functions indicated the dominance of carbon, nitrogen and sulfur metabolisms on PMD that open new questions on the role of the plastisphere in a large number of important ecological processes in the marine ecosystem.

Effects of microplastics on the structure and function of bacterial communities in sediments of a freshwater lake

As an emerging pollutant, microplastics (MPs) cause widespread concern around the world owing to the serious threat they pose to ecosystems. In particular, sediments are thought to be the long-term sink for the continual accumulation of MPs in freshwater ecosystems. Polyethylene (PE) and polyethylene terephthalate (PET) have been frequently detected with large concentration variations in freshwater sediments from the lower reaches of the Yangtze River, one of the most economically developed regions in China, characterized by accelerated urbanization and industrialization, high population density and high plastics consumption. However, the impact of PE and PET on the sedimental bacterial community composition and its function has not been well reported for this specific region. Herein, PE and PET particles were added to freshwater sediments to assess the effects of different MP types on the bacterial community and its function, using three concentrations (500, 1500 and 2500 items/kg) per MP and incubations of 35, 105 and 175 days, respectively. This study identified a total of 68 phyla, 211 classes, 518 orders, 853 families and 1745 genera. Specifically, Proteobacteria, Chloroflexi, Acidobacteriota, Actinobacteriota and Firmicutes were the top five phyla. A higher bacterial diversity was obtained in control sediments than in the MP-treated sediments. The presence of MPs, whether PET or PE, had significant impact on the bacterial diversity, community structure and community composition. PICRUSt2 and FAPOTAX predictions demonstrated that MPs could potentially affect the metabolic pathways and ecologically functional groups of bacteria in the sediment. Besides the MP-related factors, such as the type, concentration and incubation time, the physicochemical parameters had an effect on the structure and function of the bacterial community in the freshwater sediment. Taken together, this study provides useful information for further understanding how MPs affect bacterial communities in the freshwater sediment of the lower reaches of the Yangtze River, China.

Exploring correlations between microplastics, microorganisms, and water quality in an urban drinking water source

The microplastic pollution in freshwater system is gradually becoming more severe, which has led to increasing attention on the distribution and potential harmful effects of microplastics. Moreover, microplastics may have an impact on river ecology and pose risks to ecosystems. Therefore, it is important to reveal this process. This study aimed to explore correlations between microplastics and free-living microorganisms in an urban drinking water source of Xiangjiang River by using multivariate statistical analysis. The results indicated that the abundance of microplastics (size 50 μm to 5 mm) in surface water and sediments ranged from 0.72 to 18.6 (mean ± SD: 7.32 ± 2.36) items L-1 and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw), respectively, suggesting potential microplastic pollution despite the protected status as a drinking water source. Higher microplastic abundances were observed in urban areas and the downstream of wastewater plants, with mostly granular shape, transparent and black color as well as 50-100 μm in size. The multivariate statistical analysis presented that the abundance of microplastics is not significantly correlated with water indicators, due to the complexity of the abundance data. The water indicators showed an obvious correlation with microplastics in colors of transparent and black, and smaller sizes of 50-100 μm. This is also true for microplastics and microorganisms in water and sediment. Proteobacteria was the main prokaryote in water and sediments, being positively correlated with 50-100 μm microplastics; while Chloroplastida was the dominated eukaryotes, presenting a weak correlation with smaller-size microplastics. Overall, when considering the properties of microplastics such as shape, color and size, the potential correlations with water indicators and microorganisms were more evident than abundance. This study provides new insights into the multivariate statistical analysis, explaining the potential correlations among microplastic properties, microorganisms and environmental factors in a river system.

Mining strategies for isolating plastic-degrading microorganisms

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.

Land use, stratified wastewater and sediment, and microplastic attribute factors jointly influence the microplastic prevalence and bacterial colonization patterns in sewer habitats

The capacity of microplastics to harbor and propagate bacteria has been the focus of attention over the last decade. Such microplastic-supported bacterial colonization behavior in the municipal sewer system could be a critical ecological link influencing the biogeochemical activities and risks in receiving waters in urban areas, given the alarming microplastic loads discharged there. This study conducted a large-scale survey covering a wide range of residential and industrial catchments in Shanghai, China. We aimed to assess the microplastic prevalence and bacterial colonization patterns in different sewer habitats and to explore the role of land use, stratified wastewater and sediment, and microplastic attributes in shaping the patterns. We found that the sewer system formed a temporal but pronounced microplastic pool, with land use playing a significant role in the variability of microplastic prevalence. Industrial sewers contained a high abundance of microplastics with large particle sizes, diverse polymer compositions, and shapes. However, while there was a spatial discrepancy between urban and suburban areas in the abundance of microplastics in residential sewers, their predominant polymer and shape types were simple, i.e., polyethylene terephthalate (PET) and fibers. Sewer habitat characteristics, particularly the stratified wastewater and sediment determined microbial colonization patterns. The latter acted as a long-term sink for microplastics and supported the high growth of colonizers. In contrast, the wastewater plastisphere presented novel niches, hosting communities with a marked proportion of unique bacterial genera after colonization. Besides, statistics showed a highly positive and dense co-occurrence network of the plastisphere communities, especially those from the industrial sewer sediment, with enhanced metabolic activity, cellular processes and systems, and increased human pathogenic potential. Findings indicated a coarse and uncertain effect of the selective pressure of microplastic attributes on plastisphere community structure differentiation.

Revealing the environmental hazard posed by biodegradable microplastics in aquatic ecosystems: An investigation of polylactic acid's effects on Microcystis aeruginosa

The influence of petroleum-based microplastics (MPs) on phytoplankton has been extensively studied, while research on the impact of biodegradable MPs, derived from alternative plastics to contest the environmental crisis, remains limited. This study performed a 63 days co-incubation experiment to assess the effect of polylactic acid MPs (PLA-MPs) on the growth, physiology, and carbon utilization of M. aeruginosa and the change in PLA-MPs surface properties. The results showed that despite PLA-MPs induced oxidative stress and caused membrane damage in M. aeruginosa, the presence of PLA-MPs (10, 50, and 200 mg/L) triggered significant increases (p < 0.05) in the density of M. aeruginosa after 63 days. Specifically, the algal densities upon 50 and 200 mg/L PLA-MPs exposure were increased by 20.91% and 36.31% relative to the control, respectively. Meanhwhile, the reduced C/O ratio on PLA-MPs surface and change in PLA-MPs morphological characterization, which is responsible for substantially increase in the aquatic dissolved inorganic carbon concentration during the co-incubation, implying the degradation of PLA-MPs; thus, provided sufficient carbon resources that M. aeruginosa could assimilate. This was in line with the declined intracellular carbonic anhydrase content in M. aeruginosa. This study is the first attempt to uncover the interaction between PLA-MPs and M. aeruginosa, and the finding that their interaction promotes the degrading of PLA-MPs meanwhile favoring M. aeruginosa growth will help elucidate the potential risk of biodegradable MPs in aquatic environment.

Biofilms on plastic litter in an urban river: Community composition and activity vary by substrate type

In aquatic ecosystems, plastic litter is a substrate for biofilms. Biofilms on plastic and natural surfaces share similar composition and activity, with some differences due to factors such as porosity. In freshwaters, most studies have examined biofilms on benthic substrates, while little research has compared the activity and composition of biofilms on buoyant plastic and natural surfaces. Additionally, the influence of substrate size and successional stage on biofilm composition has not been commonly assessed. We incubated three plastics of distinct textures that are buoyant in rivers, low-density polyethylene (rigid; 1.7 mm thick), low-density polyethylene film (flexible; 0.0254 mm thick), and foamed polystyrene (brittle; 6.5 mm thick), as well as wood substrates (untreated oak veneer; 0.6 mm thick) in the Chicago River. Each material was incubated at three sizes (1, 7.5, and 15 cm2 ). Substrates were incubated at 2-10 cm depths and removed weekly for 6 weeks. On each substrate we measured chlorophyll concentration, biofilm biomass, respiration, and flux of nitrogen gas. We sequenced 16S and 23S rRNA genes at Weeks 1, 3, and 6 to capture biofilm community composition across successional stages. Chlorophyll, biomass, and N2 flux were similar across substrates, but respiration was greater on wood than plastics. Bacterial and algal richness and diversity were highest on foam and wood compared to polyethylene substrates. Bacterial biofilm community composition was distinct between wood and plastic substrates, while the algal community was distinct on wood and foam, which were different from each other and polyethylene substrates. These results indicate that polymer properties influence biofilm alpha and beta diversity, which may affect transport and distribution of plastic pollution and associated microbes, as well as biogeochemical processes in urban rivers. This study provides valuable insights into the effects of substrate on biofilm characteristics, and the ecological impacts of plastic pollution on urban rivers. PRACTITIONER POINTS: Plastic physical and chemical properties act as forces of selection for biofilm. Biofilm activity was similar among three different types of plastic. Community composition between plastic and wood was different.

Temporal dynamics of bacterial colonization on five types of microplastics in a freshwater lake

Microplastics (MPs), as a new substrate, provide a unique niche for microbial colonization in the freshwater ecosystems; however, the impacts of long-term MP exposure on colonized bacteria are still unclear. In this study, five MP types were exposed in a freshwater lake for approximately one year, and the MP particles, together with the surrounding water, were collected on days 60, 150, 250 and 330 during the in situ field experiment. Bacteria on the MP surface, as well as free-living bacteria in the surrounding water, were analyzed to evaluate the temporal dynamics of these bacterial communities. Results show that all five MP types exhibited signs of degradation during the exposure process. Additionally, the alpha diversity, community structure and composition of MP-attached bacteria significantly differed from that of the free-living bacteria in the surrounding water, indicating that the five MP types could provide a preferable niche for bacterial colonization in a freshwater environment. Proteobacteria, Chloroflexi, Verrucomicrobiota, Actinobacteriota and Firmicutes were the top five dominant phyla. Some plastic-degrading bacteria included in these phyla were detected, verifying that MP-attached biofilms had a certain degree of MP degradation potential. Some potentially pathogenic bacteria were also detected, suggesting an ecological threat for spreading disease in the aquatic ecosystem. Furthermore, the bacterial community and some metabolic pathways were significantly affected by the MP type (P < 0.01) and exposure time (P < 0.01), indicating that the presence of MPs not only alters the bacterial community structure and composition, but also influences their potential functional properties in freshwater ecosystems. Multiple factors, including the physicochemical properties related to MPs and the environmental parameters of the surrounding water, affect the community composition and the function of MP-attached bacteria to different degrees. Our findings indicate that the presence of MPs has a potential ecological impact on freshwater ecosystems.

Microbial community structure and co-occurrence network stability in seawater and microplastic biofilms under prometryn pollution in marine ecosystems

Prometryn has been extensively detected in marine environment because of its widespread usage in agriculture and aquaculture and has been concerns since its serious effects on aquatic organisms. However, its impact on the microbial community in the marine ecosystem including seawater and biofilm is still unclear. Therefore, a short-term indoor microcosm experiment of prometryn exposure was conducted. This study found that prometryn had a more significant impact on the structure and stability of the microbial community in seawater compared to microplastic biofilms. Additionally, we observed that the assembly of the microbial community in biofilms was more affected by stochastic processes than in seawater under the exposure of prometryn. Our study provided evidence for the increasing impact of the microbial communities under the stress of prometryn and microplastics.

High-throughput absolute quantification sequencing reveals the adaptive succession and assembly pattern of plastisphere communities in municipal sewer systems: Influence of environmental factors and microplastic polymer types

Municipal sewer systems have received increasing attention due to the magnitude of the microplastic stock and its potential ecological impacts. However, as a critical aspect of the adverse impacts, little is known about the plastisphere that forms in these engineered environments. Using high-throughput absolute quantification sequencing, we conducted a systemic study combining field survey and laboratory batch test to explain the general plastisphere pattern and the role of environmental and polymeric factors in driving plastisphere succession and assembly there. We demonstrated the capacity of microplastics to support high levels of microbial colonization, increasing by 8.7-56.0 and 1.26-5.62 times at field and laboratory scales, respectively, despite the less diverse communities hosted in the resulting plastisphere. Sediment communities exhibited higher diversity but greater loss of specific operational taxonomic units in their plastisphere than in the wastewater. The former plastisphere had primarily an enhanced methanogenesis-oriented metabolic network linked to hydrolysis fermentation, hydrogen-producing acetogenesis, and denitrification, while the latter had a pronounced niche partitioning and competitive interaction network. Exogenous substrate flux and composition were key in stimulating plastisphere community growth and succession. Furthermore, the high nitrogen baseline facilitated alternative niche formation for plastisphere nitrifiers and denitrifiers, and the plastisphere pathogens associated with denitrification and plastic biodegradation functions increased significantly. The aerobic state also promoted a 1.71 times higher colonizer load and a denser interaction pattern than the anaerobic state. Selective filtering by polymers was evident: polyethylene supported higher plastisphere diversity than polypropylene. This study provides new insights into the mechanisms driving colonizer loads and the adaptive succession and assembly of the plastisphere in such a typically hydrodynamic and highly contaminated environment. The results help to fill the knowledge gap in understanding the potential role of microplastics in shaping the microecology of sewers and increasing health risks and substrate loss during sewer transfer.

Soil plastisphere interferes with soil bacterial community and their functions in the rhizosphere of pepper (Capsicum annuum L.)

With a growing number of research reports on microplastics (MPs), there is increasing concern regarding MPs-induced contamination in soil ecological systems. Notwithstanding, the interaction between the plastisphere and rhizosphere microbial hotspots in soil-plant systems, as well as the diversity and composition of plastisphere microbial communities in such systems, remain largely unexplored. This study evaluated the response of rhizosphere bacterial communities to MPs at three growth stages of pepper and examined the bacterial communities present on MPs (plastisphere). The 16 S rRNA revealed that, under the stress of MPs, the Chao1 and Shannon index of the pepper soil bacterial community decreased. Meanwhile the relative abundance of Actinobacteriota was decreased, and that of Proteobacteria was increased. Furthermore, the plastisphere serves as a unique microbial habitat (niche) that recruits the colonization of specific bacterial groups, including potential plastic-degrading bacteria and potential pathogens (e.g., Massilia and Pseudomonas). Simultaneously, the plastisphere recruits specific bacteria that may impact the rhizosphere soil bacterial communities, thus indirectly affecting plant growth. Functional prediction using PICRUSt2 revealed higher activity in the plastisphere for Metabolism of terpenoids and polyketides, Human diseases, and Xenobiotics biodegradation and metabolism. Notably, the human diseases metabolic pathway exhibited increased activity, suggesting potential ecological risks associated with pathogens. These results highlighted that the plastisphere serves as a unique microbial habitat (niche) in the soil ecological systems, recruiting specific bacteria and potentially interfering with the surrounding soil microbial community, thereby influencing the functional characteristics of the soil ecological systems.

Effects of microplastics on cold seep sediment prokaryotic communities

Cold seep sediments are an important reservoir of microplastics (MPs) whose impact on the structure and function of prokaryotic community is not well understood. In this study, the impact of 0.2% and 1% (w/w) polyethylene (PE), polystyrene (PS), and polypropylene (PP) MPs on the cold seep sediment prokaryotic community was investigated in a 120-day laboratory incubation experiment. The results revealed that exposure to MPs altered sedimentary chemical properties in a type- and concentration-dependent manner. Furthermore, MPs significantly altered the structure of bacterial community, with some MPs degradation-associated bacterial phyla significantly increasing (p < 0.05). However, in the case of archaea, the changes in the structure of microbial community were less pronounced (p > 0.05). Co-occurrence network analysis revealed that the addition of MPs reduced the network complexity, while PICRUSt2 and FAPROTAX analyses suggested that 0.2% PP and 1% PS MPs had the most significant effects on the nitrogen and carbon cycles (p < 0.05). Overall, this study provides new insights into the effects of MPs on the structure and function of microbial communities in cold seep sediments.

Microplastics in the insular marine environment of the Southwest Indian Ocean carry a microbiome including antimicrobial resistant (AMR) bacteria: A case study from Reunion Island

The increasing threats to ecosystems and humans from marine plastic pollution require a comprehensive assessment. We present a plastisphere case study from Reunion Island, a remote oceanic island located in the Southwest Indian Ocean, polluted by plastics. We characterized the plastic pollution on the island's coastal waters, described the associated microbiome, explored viable bacterial flora and the presence of antimicrobial resistant (AMR) bacteria. Reunion Island faces plastic pollution with up to 10,000 items/km2 in coastal water. These plastics host microbiomes dominated by Proteobacteria (80 %), including dominant genera such as Psychrobacter, Photobacterium, Pseudoalteromonas and Vibrio. Culturable microbiomes reach 107 CFU/g of microplastics, with dominance of Exiguobacterium and Pseudomonas. Plastics also carry AMR bacteria including β-lactam resistance. Thus, Southwest Indian Ocean islands are facing serious plastic pollution. This pollution requires vigilant monitoring as it harbors a plastisphere including AMR, that threatens pristine ecosystems and potentially human health through the marine food chain.

Biodegradation of microplastic in freshwaters: A long-lasting process affected by the lake microbiome

Plastics have been produced for over a century, but definitive evidence of complete plastic biodegradation in different habitats, particularly freshwater ecosystems, is still missing. Using 13 C-labelled polyethylene microplastics (PE-MP) and stable isotope analysis of produced gas and microbial membrane lipids, we determined the biodegradation rate and fate of carbon in PE-MP in different freshwater types. The biodegradation rate in the humic-lake waters was much higher (0.45% ± 0.21% per year) than in the clear-lake waters (0.07% ± 0.06% per year) or the artificial freshwater medium (0.02% ± 0.02% per year). Complete biodegradation of PE-MP was calculated to last 100-200 years in humic-lake waters, 300-4000 years in clear-lake waters, and 2000-20,000 years in the artificial freshwater medium. The concentration of 18:1ω7, characteristic phospholipid fatty acid in Alpha- and Gammaproteobacteria, was a predictor of faster biodegradation of PE. Uncultured Acetobacteraceae and Comamonadaceae among Alpha- and Gammaproteobacteria, respectively, were major bacteria related to the biodegradation of PE-MP. Overall, it appears that microorganisms in humic lakes with naturally occurring refractory polymers are more adept at decomposing PE than those in other waters.

Short-term plastisphere colonization dynamics across six plastic types

Marine plastic pollution is a major concern worldwide, but the understanding of plastisphere dynamics remains limited in the southern hemisphere. To address this knowledge gap, we conducted a study in South Australia to investigate the prokaryotic community of the plastisphere and its temporal changes over 4 weeks. We submerged six plastic types (i.e., High-Density Polyethylene [HDPE], Polyvinyl chloride [PVC], Low-Density Polyethylene [LDPE], Polypropylene [PP], Polystyrene [PS] and the understudied textile, polyester [PET]) and wood in seawater and sampled them weekly to characterize the prokaryotic community using 16S rRNA gene metabarcoding. Our results showed that the plastisphere composition shifted significantly over short time scales (i.e., 4 weeks), and each plastic type had distinct groups of unique genera. In particular, the PVC plastisphere was dominated by Cellvibrionaceae taxa, distinguishing it from other plastics. Additionally, the textile polyester, which is rarely studied in plastisphere research, supported the growth of a unique group of 25 prokaryotic genera (which included the potential pathogenic Legionella genus). Overall, this study provides valuable insights into the colonization dynamics of the plastisphere over short time scales and contributes to narrowing the research gap on the southern hemisphere plastisphere.

Environmental exposure more than plastic composition shapes marine microplastic-associated bacterial communities in Pacific versus Caribbean field incubations

Microplastics have arisen as a global threat to marine ecosystems. In this study, we explored the role that plastic polymer type, incubation time and geographic location have on shaping the microbial community adhered to the microplastics, termed the plastisphere. We performed detailed bacterial plastisphere community analyses on microplastics of six different household plastic polymers, serving as proxies of secondary microplastics, incubated for 6 weeks in coastal Pacific waters. These bacterial communities were compared to the plastisphere communities grown on identical microplastic particles incubated in the coastal Caribbean Sea at Bocas del Toro, Panama. Ribosomal gene sequencing analyses revealed that bacterial community composition did not exhibit a significant preference for plastic type at either site but was instead driven by the incubation time and geographic location. We identified a 'core plastisphere' composed of 57 amplicon sequence variants common to all plastic types, incubation times and locations, with possible synergies between taxa. This study contributes to our understanding of the importance of geography in addition to exposure time, in the composition of the plastisphere.

Identification of rare microbial colonizers of plastic materials incubated in a coral reef environment

Plastic waste accumulation in marine environments has complex, unintended impacts on ecology that cross levels of community organization. To measure succession in polyolefin-colonizing marine bacterial communities, an in situ time-series experiment was conducted in the oligotrophic coastal waters of the Bermuda Platform. Our goals were to identify polyolefin colonizing taxa and isolate bacterial cultures for future studies of the biochemistry of microbe-plastic interactions. HDPE, LDPE, PP, and glass coupons were incubated in surface seawater for 11 weeks and sampled at two-week intervals. 16S rDNA sequencing and ATR-FTIR/HIM were used to assess biofilm community structure and chemical changes in polymer surfaces. The dominant colonizing taxa were previously reported cosmopolitan colonizers of surfaces in marine environments, which were highly similar among the different plastic types. However, significant differences in rare community composition were observed between plastic types, potentially indicating specific interactions based on surface chemistry. Unexpectedly, a major transition in community composition occurred in all material treatments between days 42 and 56 (p < 0.01). Before the transition, Alteromonadaceae, Marinomonadaceae, Saccharospirillaceae, Vibrionaceae, Thalassospiraceae, and Flavobacteriaceae were the dominant colonizers. Following the transition, the relative abundance of these taxa declined, while Hyphomonadaceae, Rhodobacteraceae and Saprospiraceae increased. Over the course of the incubation, 8,641 colonizing taxa were observed, of which 25 were significantly enriched on specific polyolefins. Seven enriched taxa from families known to include hydrocarbon degraders (Hyphomonadaceae, Parvularculaceae and Rhodobacteraceae) and one n-alkane degrader (Ketobacter sp.). The ASVs that exhibited associations with specific polyolefins are targets of ongoing investigations aimed at retrieving plastic-degrading microbes in culture.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

Quorum sensing bacteria in microplastics epiphytic biofilms and their biological characteristics which potentially impact marine ecosystem

Microplastics (MPs) have been shown to be a new type of pollutant in the oceans, with complex biofilms attached to their surfaces. Bacteria with quorum sensing (QS) systems are important participants in biofilms. Such bacteria can secrete and detect signal molecules. When a signal molecule reaches its threshold level, bacteria with QS systems can perform several biological functions, such as biofilm formation and antibiotic metabolite production. However, the ecological effects of QS bacteria in biofilm as MPs distribute globally with ocean currents are not to be elucidate yet. In this study, polypropylene and polyvinyl chloride were selected for on-site enrichment to acquire microplastics with biofilms. Eight culturable QS bacteria in the resulting biofilm were isolated by using biosensor assays, and their biodiversity was analyzed. The profiles of the N-acyl-homoserine lactones (AHLs) produced by these bacteria were analyzed by using thin-layer chromatography (TLC)-bioautography and gas chromatography and mass spectrometry (GC-MS). Biofilm-forming properties and several biological characteristics, such as bacteriostasis, algal inhibition, and dimethylsulfoniopropionate (DMSP) degradation, were explored along with QS quenching. Results showed that QS bacteria were mainly affiliated with class Alphaproteobacteria, particularly Rhodobacteraceae, followed by class Gammaproteobacteria. TLC-bioautography and GC-MS analyses revealed that seven AHLs, namely, C6-HSL, C8-HSL, 3-oxo-C6-HSL, 3-oxo-C8-HSL, 3-oxo-C10-HSL, and two unidentified AHLs were produced. The QS system equipped bacteria with strong biofilm-forming capacity and may contribute to the keystone roles of Rhodobacteraceae. In addition, QS bacteria may exacerbate the adverse environmental effects of MPs, such as inducing the misfeeding of planktons on MPs. This study elucidated the diversity of QS bacteria in MP-associated biofilms and provided a new perspective of the effect of key membrane-forming bacteria on the marine ecological environment.

Sediment-driven plastisphere community assembly on plastic debris in tropical coastal and marine environments

Coastal habitats have been suggested to serve as a sink for unaccounted plastic debris, i.e., "missing plastic" in the sea, and hence, a hotspot of plastic pollution in the marine and coastal environments. Although the accumulation of plastic debris may pose significant threats to coastal ecosystems, we know little about the fate of these plastic debris and their ecological impacts due to the lack of studies on plastic-microbe interactions in coastal habitats, especially for the tropical marine and coastal environments. In this study, we collected plastic debris from 14 sites consisting of various coastal ecosystems (seagrass meadows, mangrove forests, and beaches), and marine ecosystem (coral reef) around Singapore and characterized the prokaryotic and eukaryotic microbial communities colonized on them. Our results showed that the composition of plastisphere communities in these intertidal ecosystems was predominantly influenced by the sediment than by the plastic materials. Compared with surrounding sediment and seawater, the plastic debris enriched potential plastic degraders, such as Muricauda, Halomonas, and Brevundimonas. The plastic debris was also found to host taxa that play significant roles in biogeochemical cycles (e.g., cyanobacteria, Erythrobacter), hygienically relevant bacteria (e.g., Chryseobacterium, Brevundimonas), and potential pathogens that may negatively impact the health of coastal ecosystems (e.g., Thraustochytriaceae, Labyrinthulaceae, Flavobacterium). Taken together, our study provides valuable insights into the plastic-microbe interactions in tropical coastal and marine ecosystems, highlighting the urgent need for plastisphere studies to understand the fate and ecological impacts of plastic debris accumulated in coastal habitats.

The hidden risk of microplastic-associated pathogens in aquatic environments

Increasing studies of plastisphere have raised public concern about microplastics (MPs) as vectors for pathogens, especially in aquatic environments. However, the extent to which pathogens affect human health through MPs remains unclear, as controversies persist regarding the distinct pathogen colonization on MPs as well as the transmission routes and infection probability of MP-associated pathogens from water to humans. In this review, we critically discuss whether and how pathogens approach humans via MPs, shedding light on the potential health risks involved. Drawing on cutting-edge multidisciplinary research, we show that some MPs may facilitate the growth and long-range transmission of specific pathogens in aquatic environments, ultimately increasing the risk of infection in humans. We identify MP- and pathogen-rich settings, such as wastewater treatment plants, aquaculture farms, and swimming pools, as possible sites for human exposure to MP-associated pathogens. This review emphasizes the need for further research and targeted interventions to better understand and mitigate the potential health risks associated with MP-mediated pathogen transmission.

Plastic pollution and fungal, protozoan, and helminth pathogens - A neglected environmental and public health issue?

Plastic waste is ubiquitous in the environment and can become colonised by distinct microbial biofilm communities, known collectively as the 'plastisphere.' The plastisphere can facilitate the increased survival and dissemination of human pathogenic prokaryotes (e.g., bacteria); however, our understanding of the potential for plastics to harbour and disseminate eukaryotic pathogens is lacking. Eukaryotic microorganisms are abundant in natural environments and represent some of the most important disease-causing agents, collectively responsible for tens of millions of infections, and millions of deaths worldwide. While prokaryotic plastisphere communities in terrestrial, freshwater, and marine environments are relatively well characterised, such biofilms will also contain eukaryotic species. Here, we critically review the potential for fungal, protozoan, and helminth pathogens to associate with the plastisphere, and consider the regulation and mechanisms of this interaction. As the volume of plastics in the environment continues to rise there is an urgent need to understand the role of the plastisphere for the survival, virulence, dissemination, and transfer of eukaryotic pathogens, and the effect this can have on environmental and human health.

Bacterial community profiling associated with pearl culture facilities of Liusha Bay, the largest marine pearl culture base on the western Guangdong coast, South China

A large number of aquaculture facilities produced during the farming process are made of plastics. These plastics can be a distinct habitat for bacteria due to their unique materials. Therefore, this paper focuses on plastic aquaculture facilities and investigates the impact of bacterial accumulation on plastic surfaces. In this study, the high-throughput sequencing of 16S rRNA was conducted to investigate bacterial community profiling associated with the pearl culture facilities (cultured net cages and foam buoys) and surrounding water of Liusha Bay. Alpha diversity analysis showed that the richness and diversity indexes of bacterial communities in pearl culture facilities were higher than those in the aquatic environment. The richness and diversity indexes of bacterial communities were different between cultured net cages and foam buoys. Spatially influenced bacterial communities attached to pearl culture facilities varied between aquaculture areas. Thus, plastic has become a habitat for bacteria, floating in the marine environment and providing a favorable living environment for marine microorganisms and specific preferences for different substrate types. The relative abundance of certain functions on the attached bacterial community of the culture facility was high, which suggested that plastics did not only alter community structure but also influenced bacterial function. In addition, we detected small amounts of pathogenic bacteria, such as Vibrio and Bruegeria, in pearl culture facilities and surrounding seawater, suggesting that plastics can act as vectors for potentially pathogenic bacteria that may have an impact on the development of aquaculture. Our understanding of plastic ecology has been enriched by the discovery of the various microbial assemblages that can occur in aquaculture facilities.