Transformation of endocrine disrupting chemicals, pharmaceutical and personal care products during drinking water disinfection

Indoor-Light-Activated Blue TiO2-Molecule-WO3 Visible Photocatalyst for Antibacterial Performance against Escherichia coli

Currently used visible light catalysts either operate with high-power light sources or require prolonged periods of time for catalytic reactions. This presents a limitation regarding facile application in indoor environments and spaces frequented by the public. Furthermore, this gives rise to elevated power consumption. Here, we enhance photocatalytic performance with blue TiO2 and WO3 complexes covalently coupled through an organic molecule, 3-mercaptopropionic acid, under indoor light. Antibacterial experiments against 108 CFU/mL Escherichia coli (E. coli) suspensions were conducted under indoor light exposure conditions. They showed a sterilization effect of almost 90% within 70 min and nearly 100% after 110 min. The complex generates reactive oxygen species (ROS), such as •OH and O2•-, under natural air conditions. We also showed that h+ and •OH are important for sterilizing E. coli using common scavengers. This research highlights the potential of these complexes to generate ROS, effectively playing a crucial role in antibacterial effects under indoor light.

Endocrine disrupting chemicals in Italian drinking water systems: Insights from a three-year investigation combining chemical and effect-based tools

Drinking water quality can be compromised by endocrine-disrupting chemicals (EDCs). Three phenolic compounds [bisphenol A (BPA), nonylphenol (NP), and 4-octylphenol (OP)] and three hormones [17β-estradiol (E2), estrone (E1), and 17α-ethinylestradiol (EE2)] were analyzed as EDCs potentially occurring in source and drinking water from three full-scale drinking water treatment plants (DWTPs) in the Romagna area (Italy) by a combined approach of HPLC-MS/MS target analysis and effect-based tests for estrogenicity and genotoxicity. The EDC removal efficiency was evaluated at different steps along the treatment process in the most advanced DWTP. NP prevailed in all samples, followed by BPA. Sporadic contamination by OP and E1/E2 appeared only in the source waters; EE2 was never detected. No estrogenic or genotoxic activity was found, except for two samples showing estrogenicity well below the effect-based trigger value suggested for drinking water safety (0.9 ng/L EEQ). BPA and NP levels were largely below the threshold value; however, increases were observed after the intermediate steps of the treatment chain. The good quality of the water relied on the last step, i.e. the activated carbon filtration. DWTPs may represent an extra source of EDCs and monitoring chemical occurrence at all steps of the process is advisable to improve efficiency.

Removal of organic micropollutants in biologically active filters: A systematic quantitative review of key influencing factors

Biofiltration utilizes natural mechanisms including biodegradation and biotransformation along with other physical processes for the removal of organic micropollutants (OMPs) such as pharmaceuticals, personal care products, pesticides and industrial compounds found in (waste)water. In this systematic review, a total of 120 biofiltration studies from 25 countries were analyzed, considering various biofilter configurations, source water types, biofilter media and scales of operation. The study also provides a bibliometric analysis to identify the emerging research trends in the field. The results show that granular activated carbon (GAC) either alone or in combination with another biofiltration media can remove a broad range of OMPs efficiently. The impact of pre-oxidation on biofilter performance was investigated, revealing that pre-oxidation significantly improved OMP removal and reduced the empty bed contact time (EBCT) needed to achieve a consistently high OMP. Biofiltration with pre-oxidation had median removals ranging between 65% and >90% for various OMPs at 10-45 min EBCT with data variability drastically reducing beyond 20 min EBCT. Biofiltration without pre-oxidation had lower median removals with greater variability. The results demonstrate that pre-oxidation greatly enhances the removal of adsorptive and poorly biodegradable OMPs, while its impact on other OMPs varies. Only 19% of studies we reviewed included toxicity testing of treated effluent, and even fewer measured transformation products. Several studies have previously reported an increase in effluent toxicity because of oxidation, although it was successfully abated by subsequent biofiltration in most cases. Therefore, the efficacy of biofiltration treatment should be assessed by integrating toxicity testing into the assessment of overall removal.

Phenolic compounds in water: Review of occurrence, risk, and retention by membrane technology

Phenolic compounds are one of the main contributors to water source contamination worldwide. In this review, the data collected on Elsevier, Scopus, and Pubmed, considering papers published between 2000 and 2023, showed more than 60 different phenols have been identified in water matrix (<0.065-179,000,000 ng L-1). The highest concentration reported was in surface water canals in India. The most recurrent and studied compound was bisphenol A (n = 93) in concentrations ranging from 0.45 to 2,970,000 ng L-1. The solid phase extraction (HBL Oasis cartridge) and methanol as solvent was the method of pre-concentration most used followed by gas chromatography for the determination of phenols in water samples. The importance of drinking water guidelines incorporating more phenolic compounds was emphasized given the variety of these compounds quantified in water matrix. The human health risk assessment (HRA) was performed for the min-max concentrations of the pollutants reported in the literature. High HRA even at the lowest concentrations for 2-nitrophenol, 2,6-dichlorophenol, 3,4,5-trichlorophenol, 2,3,4,6-tetrachlorophenol, and 2,4-dinitrophenol was recognized. The cancer risk estimated was considered possible for 3-methylphenol, 2,4-dimethylphenol, 2,4,6-trichlorophenol, pentachlorophenol, and 2,4-dinitrophenol in the highest concentrations. The in-depth discussion of mechanisms, advantages, challenges, and carbon footprint of membrane technologies in water treatment and phenols retention demonstrated the great potential and trends for the production of safe drinking water, highlighting reverse osmosis, as a mature technology, and membrane distillation, as an emergent technology.

Physiological impact of personal care product constituents on non-target aquatic organisms

Personal care products (PCPs) are products used in cleaning, beautification, grooming, and personal hygiene. The rise in diversity, usage, and availability of PCPs has resulted in their higher accumulation in the environment. Thus, these constitute an emerging category of environmental contaminants due to the potential of its constituents (chemical and non-chemical) to induce various physiological effects even at lower concentrations (ng/L). For analyzing the impact of the PCPs constituents on the non-target organism about 300 article including research articles, review articles and guidelines were studied from 2000 to 2023. This review aims to firstly discuss the fate and accumulation of PCPs in the aquatic environment and organisms; secondly provides overview of environmental risks that are linked to PCPs; thirdly review the trends, current status of regulations and risks associated with PCPs and finally discuss the knowledge gaps and future perspectives for future research. The article discusses important constituents of PCPs such as antimicrobials, cleansing agents and disinfectants, fragrances, insect repellent, moisturizers, plasticizers, preservatives, surfactants, UV filters, and UV stabilizers. Each of them has been found to display certain toxic impact on the aquatic organisms especially the plasticizers and UV filters. These continuously and persistently release biologically active and inactive components which interferes with the physiological system of the non-target organism such as fish, corals, shrimps, bivalves, algae, etc. With a rise in the number of toxicity reports, concerns are being raised over the potential impacts of these contaminant on aquatic organism and humans. The rate of adoption of nanotechnology in PCPs is greater than the evaluation of the safety risk associated with the nano-additives. Hence, this review article presents the current state of knowledge on PCPs in aquatic ecosystems.

Contributions of Pharmaceuticals to DBP Formation and Developmental Toxicity in Chlorination of NOM-containing Source Water

Pharmaceuticals have been considered a priority group of emerging micropollutants in source waters in recent years, while their role in the formation and toxicity of disinfection byproducts (DBPs) during chlorine disinfection remains largely unclear. In this study, the contributions of natural organic matter (NOM) and pharmaceuticals (a mixture of ten representative pharmaceuticals) to the overall DBP formation and toxicity during drinking water chlorination were investigated. By innovatively "normalizing" chlorine exposure and constructing a kinetic model, we were able to differentiate and evaluate the contributions of NOM and pharmaceuticals to the total organic halogen (TOX) formation for source waters that contained different levels of pharmaceuticals. It was found that at a chlorine contact time of 1.0 h, NOM (2 mg/L as C) and pharmaceuticals (total 0.0062-0.31 mg/L as C) contributed 79.8-99.5% and 0.5-20.2%, respectively, of TOX. The toxicity test results showed that the chlorination remarkably increased the toxicity of the pharmaceutical mixture by converting the parent compounds into more toxic pharmaceutical-derived DBPs, and these DBPs might contribute significantly to the overall developmental toxicity of chlorinated waters. This study highlights the non-negligible role of pharmaceuticals in the formation and toxicity of overall DBPs in chlorinated drinking water.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Assessment of 18 endocrine disrupting chemicals in tap water samples from Klang Valley, Malaysia

Multiclass of endocrine disrupting chemicals (EDCs) such as nine perfluoroalkyl and polyfluoroalkyl substances (PFAS), five bisphenols, and four parabens were analysed in tap water samples from Malaysia's Klang Valley region. All samples were analysed using liquid chromatography mass tandem spectrometry (LC-MS/MS) with limit of quantitation (LOQ) ranged between 0.015 and 5 ng/mL. Fifteen of the 18 EDCs were tested positive in tap water samples, with total EDC concentrations ranging from 0.28 to 5516 ng/L for all 61 sampling point locations. In a specific area of the Klang Valley, the total concentration of EDCs was found to be highest in Hulu Langat, followed by Sepang, Putrajaya, Petaling, Kuala Lumpur, Seremban, and Gombak/Klang. PFAS and paraben were the most found EDCs in all tap water samples. Meanwhile, ethyl paraben (EtP) exhibited the highest detection rate, with 90.2% of all locations showing its presence. Over 60% of the regions showed the presence of perfluoro-n-butanoic acid (PFBA), perfluoro-n-hexanoic acid (PFHXA), perfluoro-n-octanoic acid (PFOA), perfluoro-n-nonanoic acid (PFNA), and perfluoro-1-octanesulfonate (PFOS), whereas the frequency of detection for other compounds was less than 40%. The spatial distribution and mean concentrations of EDCs in the Klang Valley regions revealed that Hulu Langat, Petaling Jaya, and Putrajaya exhibited higher levels of bisphenol A (BPA). On the other hand, Kuala Lumpur and Sepang displayed the highest mean concentrations of PFBA. In the worst scenario, the estimated daily intake (EDI) and risk quotient of some EDCs in this study exceeded the acceptable daily limits recommended by international standards, particularly for BPA, PFOA, PFOS, and PFNA, where the risk quotient (RQ) was found to be greater than 1, indicating a high risk to human health. The increasing presence of EDCs in tap water is undoubtedly a cause for concern as these substances can have adverse health consequences. This highlights the necessity for a standardised approach to evaluating EDC exposure and its direct impact on human populations' health.

Status quo on identified transformation products of organic ultraviolet filters and their persistence

Organic micropollutants of concern-including organic UV filters (UVF)-are getting increasing attention. Personal care products such as sunscreens or cosmetic articles often contain large quantities of UVF. These substances enter the environment either directly (during outdoor activities) or indirectly (via sewages from households). Therefore, the removal or degradation of UVF by natural or technical treatment processes is important to understand. UVF are often incompletely removed and transformed to side products of incomplete mineralization by abiotic and biotic processes. An extensive overview on transformation products (TPs) is essential to systematically identify knowledge gaps and to derive research needs. While there are many reviews on the UVF themselves, the number of reviews which focus on their TPs is limited. Consequently, this review gives an overview on the latest findings regarding TPs of UVF. In this publication, known TPs of UVF, which were formed during abiotic and biotic processes, are reviewed. Target substances were defined and a literature database was reviewed for studies on TPs of the target substances. The first list of studies was shortened stepwise, thus generating a final list of studies which contained only the relevant studies. Since biodegradation is one of the most important pathways for removal of organic compounds from the environment, this review presents an overview on known TPs of organic UVF and their biodegradability, which determines their environmental fate. In this way, all identified TPs of UVF were listed and checked for information on their biodegradability. A total of 2731 records of studies were assessed. Forty-two studies, which assessed 46 processes that lead to the formation of identified TPs, were included in this review. One hundred and seventyseven different TPs resulting from 11 different UVF were identified. Little to no data on the biodegradability was found for TPs. This indicates a severe lack of data on the biodegradability of TPs of organic UVF substances. Since most TPs lack information on biodegradability, further research should provide information on both-identity and biodegradability-of formed TPs to be able to assess their hazardousness for the environment.

Predictive in silico models for aquatic toxicity of cosmetic and personal care additive mixtures

As emerging environmental contaminants, cosmetic and personal care additives (CPCAs) may have less oversight than other consumer products. Their continuous release and pseudopersistence could cause long-term harm to the aquatic environment. Since CPCAs generally exist in the form of mixtures in the environment, prediction and analysis of their mixture toxicity are crucial for ecological risk assessment. In this study, the acute toxicity of five typical CPCA mixtures to Daphnia magna was tested. The combined toxicity of binary mixtures was examined with the traditional concentration addition (CA) and independent action (IA) model. Overall, the synergistic effect of the five CPCAs may be caused mainly by methylparaben. In addition, reliable approaches for quantitative structure-activity relationship (QSAR) model development were explored. Specifically, 18 QSAR models were developed by three dataset partitioning techniques (Kennard-Stone's algorithm division, Euclidean distance based division, and sorted activity based division), two descriptor filtering methods (genetic algorithm and stepwise multiple linear regression) and three regression methods (multiple linear regression, partial least squares and support vector machine). Sixteen equations were applied for the calculation of the mixture descriptors to screen the functional expression of the mixture descriptors with the largest contribution to the mixture toxicity. A new comprehensive parameter that integrates internal and external validation was proposed for QSAR models evaluation. The mixture toxicity is mainly related the 3D distribution of atomic masses and the spatial distribution of the molecule electronic properties. Rigorously validated and externally predictive QSAR models were developed for predicting the toxicity of binary CPCAs mixtures with any ratio, in the applicability domain. The best possible work frame for construction and validation of QSAR models to provide reliable predictions on the mixture toxicity was proposed.

Buchwald-Hartwig coupled conjugated microporous polymer for efficient removal COVID-19 antiviral drug famciclovir from waters: Adsorption behavior and mechanism

The consumption of famciclovir (FCV) has been increased dramatically since the outbreak of coronavirus in 2019, and the pollution and harm of FCV in waters are concerned. Here, by utilizing aryl halides on 2, 4, 6-tris(4-bromophenyl)- 1, 3, 5-triazine (BPT) and primary amine groups on benzidine (BZ), a novel conjugated microporous polymer, namely BPT-BZ-CMP, was synthesized by Buchwald-Hartwig coupling reaction and applied in the removal of FCV from aqueous solution firstly. The synthesized BPT-BZ-CMP were characterized by various methods, including FTIR, SEM, BET, and Zeta-potential. Due to the micropore structure and high specific surface area, it took only 30 min for BPT-BZ-CMP to adsorb FCV to reach an equilibrium, and the maximum adsorption capacity was 347.8 mg·g^-1. The Liu and pseudo-second-order kinetic models properly fit the adsorption equilibrium and kinetic data, respectively. The adsorption process was a spontaneous process, and the hydrogen bonding, π-π interaction and C-H···π interaction enhanced the adsorption of FCV on BPT-BZ-CMP. BPT-BZ-CMP maintained a good adsorption capacity after four consecutive adsorption-desorption cycle experiments. This study confirmed the potential of BPT-BZ-CMP as efficient sorbent to remove FCV from aqueous solutions.

An Overview of the Impact of Pharmaceuticals on Aquatic Microbial Communities

Pharmaceuticals are present as pollutants in several ecosystems worldwide. Despite the reduced concentrations at which they are detected, their negative impact on natural biota constitutes a global concern. The consequences of pharmaceuticals' presence in water sources and food have been evaluated with a higher detail for human health. However, although most of the pharmaceuticals detected in the environment had not been designed to act against microorganisms, it is of utmost importance to understand their impact on the environmental native microbiota. Microbial communities can suffer serious consequences from the presence of pharmaceuticals as pollutants in the environment, which may directly impact public health and ecosystem equilibrium. Among this class of pollutants, the ones that have been studied in more detail are antibiotics. This work aims to provide an overview of the impacts of different pharmaceuticals on environmental biofilms, more specifically in biofilms from aquatic ecosystems and engineered water systems. The alterations caused in the biofilm function and characteristics, as well as bacteria antimicrobial tolerance and consequently the associated risks for public health, are also reviewed. Despite the information already available on this topic, the need for additional data urges the assessment of emerging pollutants on microbial communities and the potential public health impacts.

Bioremediation of Endocrine Disrupting Chemicals- Advancements and Challenges

Endocrine Disrupting Chemicals (EDCs), major group of recalcitrant compounds, poses a serious threat to the health and future of millions of human beings, and other flora and fauna for years to come. A close analysis of various xenobiotics undermines the fact that EDC is structurally diverse chemical compounds generated as a part of anthropogenic advancements as well as part of their degradation. Regardless of such structural diversity, EDC is common in their ultimate drastic effect of impeding the proper functioning of the endocrinal system, basic physiologic systems, resulting in deregulated growth, malformations, and cancerous outcomes in animals as well as humans. The current review outlines an overview of various EDCs, their toxic effects on the ecosystem and its inhabitants. Conventional remediation methods such as physico-chemical methods and enzymatic approaches have been put into action as some form of mitigation measures. However, the last decade has seen the hunt for newer technologies and methodologies at an accelerated pace. Genetically engineered microbial degradation, gene editing strategies, metabolic and protein engineering, and in-silico predictive approaches - modern day's additions to our armamentarium in combating the EDCs are addressed. These additions have greater acceptance socially with lesser dissonance owing to reduced toxic by-products, lower health trepidations, better degradation, and ultimately the prevention of bioaccumulation. The positive impact of such new approaches on controlling the menace of EDCs has been outlaid. This review will shed light on sources of EDCs, their impact, significance, and the different remediation and bioremediation approaches, with a special emphasis on the recent trends and perspectives in using sustainable approaches for bioremediation of EDCs. Strict regulations to prevent the release of estrogenic chemicals to the ecosystem, adoption of combinatorial methods to remove EDC and prevalent use of bioremediation techniques should be followed in all future endeavors to combat EDC pollution. Moreover, the proper development, growth and functioning of future living forms relies on their non-exposure to EDCs, thus remediation of such chemicals present even in nano-concentrations should be addressed gravely.

Molecular consequences of the exposure to toxic substances for the endocrine system of females

Endocrine-disrupting chemicals (EDCs) are common in the environment and in everyday products such as cosmetics, plastic food packaging, and medicines. These substances are toxic in small doses (even in the order of micrograms) and enter the body through the skin, digestive or respiratory system. Numerous studies confirm the negative impact of EDCs on living organisms. They disrupt endocrine functions, contributing to the development of neoplastic and neurological diseases, as well as problems with the circulatory system and reproduction. EDCs affect humans and animals by modulating epigenetic processes that can lead to disturbances in gene expression or failure and even death. They also affect steroid hormones by binding to their receptors as well as interfering with synthesis and secretion of hormones. Prenatal exposure may be related to the impact of EDCs on offspring, resulting in effects of these substances on the ovaries and leading to the reduction of fertility through disturbances in the function of steroid receptors or problems with steroidogenesis and gametogenesis. Current literature indicates the need to continue research on the effects of EDCs on the female reproductive system. The aim of this review was to identify the effects of endocrine-disrupting chemicals on the female reproductive system and their genetic effects based on recent literature.

Hypochlorous Acid: From Innate Immune Factor and Environmental Toxicant to Chemopreventive Agent Targeting Solar UV-Induced Skin Cancer

A multitude of extrinsic environmental factors (referred to in their entirety as the 'skin exposome') impact structure and function of skin and its corresponding cellular components. The complex (i.e. additive, antagonistic, or synergistic) interactions between multiple extrinsic (exposome) and intrinsic (biological) factors are important determinants of skin health outcomes. Here, we review the role of hypochlorous acid (HOCl) as an emerging component of the skin exposome serving molecular functions as an innate immune factor, environmental toxicant, and topical chemopreventive agent targeting solar UV-induced skin cancer. HOCl [and its corresponding anion (OCl-; hypochlorite)], a weak halogen-based acid and powerful oxidant, serves two seemingly unrelated molecular roles: (i) as an innate immune factor [acting as a myeloperoxidase (MPO)-derived microbicidal factor] and (ii) as a chemical disinfectant used in freshwater processing on a global scale, both in the context of drinking water safety and recreational freshwater use. Physicochemical properties (including redox potential and photon absorptivity) determine chemical reactivity of HOCl towards select biochemical targets [i.e. proteins (e.g. IKK, GRP78, HSA, Keap1/NRF2), lipids, and nucleic acids], essential to its role in innate immunity, antimicrobial disinfection, and therapeutic anti-inflammatory use. Recent studies have explored the interaction between solar UV and HOCl-related environmental co-exposures identifying a heretofore unrecognized photo-chemopreventive activity of topical HOCl and chlorination stress that blocks tumorigenic inflammatory progression in UV-induced high-risk SKH-1 mouse skin, a finding with potential implications for the prevention of human nonmelanoma skin photocarcinogenesis.

Transformation Products of Emerging Pollutants Explored Using Non-Target Screening: Perspective in the Transformation Pathway and Toxicity Mechanism—A Review

The scientific community has increasingly focused on forming transformation products (TPs) from environmental organic pollutants. However, there is still a lot of discussion over how these TPs are generated and how harmful they are to living terrestrial or aquatic organisms. Potential transformation pathways, TP toxicity, and their mechanisms require more investigation. Non-target screening (NTS) via high-resolution mass spectrometry (HRMS) in model organisms to identify TPs and the formation mechanism on various organisms is the focus of this review. Furthermore, uptake, accumulation process, and potential toxicity with their detrimental consequences are summarized in various organisms. Finally, challenges and future research initiatives, such as performing NTS in a model organism, characterizing and quantifying TPs, and evaluating future toxicity studies on TPs, are also included in this review.

A Review on Emerging Pollutants in the Water Environment: Existences, Health Effects and Treatment Processes

Emerging pollutants (EPs), also known as micropollutants, have been a major issue for the global population in recent years as a result of the potential threats they bring to the environment and human health. Pharmaceuticals and personal care products (PPCPs), antibiotics, and hormones that are used in great demand for health and cosmetic purposes have rapidly culminated in the emergence of environmental pollutants. EPs impact the environment in a variety of ways. EPs originate from animal or human sources, either directly discharged into waterbodies or slowly leached via soils. As a result, water quality will deteriorate, drinking water sources will be contaminated, and health issues will arise. Since drinking water treatment plants rely on water resources, the prevalence of this contamination in aquatic environments, particularly surface water, is a severe problem. The review looks into several related issues on EPs in water environment, including methods in removing EPs. Despite its benefits and downsides, the EPs treatment processes comprise several approaches such as physico-chemical, biological, and advanced oxidation processes. Nonetheless, one of the membrane-based filtration methods, ultrafiltration, is considered as one of the technologies that promises the best micropollutant removal in water. With interesting properties including a moderate operating manner and great selectivity, this treatment approach is more popular than conventional ones. This study presents a comprehensive summary of EP’s existence in the environment, its toxicological consequences on health, and potential removal and treatment strategies.

Enhanced Disrupting Effect of Benzophenone-1 Chlorination Byproducts to the Androgen Receptor: Cell-Based Assays and Gaussian Accelerated Molecular Dynamics Simulations

Benzophenone-1 (BP-1), one of the commonly used ultraviolet filters, has caused increasing public concern due to frequently detected residues in environmental and recreational waters. Its susceptibility to residual chlorine and the potential to subsequently trigger endocrine disruption remain unknown. We herein investigated the chlorination of BP-1 in swimming pool water and evaluated the endocrine disruption toward the human androgen receptor (AR). The structures of monochlorinated (P1) and dichlorinated (P2) products were separated and characterized by mass spectrometry and ¹H-¹H NMR correlation spectroscopy. P1 and P2 exhibited significantly higher antiandrogenic activity in yeast two-hybrid assays (EC₅₀, 6.13 μM and 9.30 μM) than did BP-1 (12.89 μM). Our 350 ns Gaussian accelerated molecular dynamics simulations showed the protein dynamics in a long-time scale equilibrium, and further energy calculations revealed that although increased hydrophobic interactions are primarily responsible for enhanced binding affinities between chlorinated products and the AR ligand binding domain, the second chloride in P2 still hinders the complex motion because of the solvation penalty. The mixture of BP-1-P1-P2 elicited additive antiandrogenic activity, well fitted by the concentration addition model. P1 and P2 at 1 μM consequently downregulated the mRNA expression of AR-regulated genes, NKX3.1 and KLK3, by 1.7-9.1-fold in androgen-activated LNCaP cells. Because chlorination of BP-1 occurs naturally by residual chlorine in aquatic environments, our results regarding enhanced antiandrogenic activity and disturbed AR signaling provided evidence linking the use of personal care products with potential health risks.

A review on analytical methods for pharmaceutical and personal care products and their transformation products

Pharmaceutical and personal care products (PPCPs) and corresponding transformation products have caused widespread concern due to their persistent emissions and potential toxicity. They have wide octanol-water partition coefficients (K_ow) and different ionization constants (pK_a) resulting in a poor analysis accuracy and efficiency. A suitable analytical method is the first prerequisite for further research on their environmental behavior to prioritize the substances. This study reviewed a full-scale analytical protocol for environmental samples in the recent ten years: from sampling to instrumental methods. Passive sampling techniques were compared and recommended for long-term continuous and scientific observation. A quick and effective sample extraction and clean-up method are highly required. Chromatographic methods coupled to mass spectrometry for determining PPCPs with a wide range of logK_ow (-7.53 to 10.80) were summed up. High-resolution mass spectrometry was confirmed to be a promising strategy for screening unknown transformation products, which would provide a nanogram level of detection limits and more accurate mass resolution. Screening strategies and mass change principles were summarized in detail. The recovery rate was important in multiple contaminants analysis identification and factors affecting the recovery rate of PPCPs were also discussed in this review, including sample matrix, target compounds characteristics, extraction method and solid-phase adsorbent. This review provides useful information for the selection of appropriate analytical methods and future development directions.

Bioaccumulation and reproductive toxicity of bisphenol A in male-pregnant seahorse (Hippocampus erectus) at environmentally relevant concentrations

Seahorses, with brood pouch in adult males, are a bioindicator species that exhibit specialized reproductive strategy of "male pregnancy". Bisphenol A (BPA), one of the most pervasive endocrine-disrupting chemicals (EDCs), is hazardous for reproductive, immune, and neurological systems. However, no evidence of BPA toxicity to the male-pregnant animals is available. Herein, the reproductive toxicity of BPA was evaluated in lined seahorses (Hippocampus erectus) following exposure to environmentally relevant concentrations (10, 100, and 1000 μg/L) through physiological, histological, and transcriptional analyses. Our results indicated BPA bioaccumulation to be positively correlated with exposure doses in both sexes. Ovarian failure was only observed in the high-dose BPA treatment group, accompanied by the apoptosis of follicular cells and up-regulation of pro-apoptotic genes. However, brood pouches maintenance were surprisingly inhibited at low concentration, and transcriptomic analysis revealed disturbed profiles of genes involved in the extracellular matrix and cell-cell adhesion pathways. Interestingly, seahorse testes were less sensitive to BPA exposure than that in other teleosts. Thus, our study suggests that BPA at environmentally relevant concentrations might cause reproductive dysfunction in seahorses, potentially exerting adverse effects on the seahorse population since most of them inhabit shallow coastal areas with prevalent estrogenic contaminants.

Bifunctional Bi12O17Cl2/MIL-100(Fe) composites toward photocatalytic Cr(VI) sequestration and activation of persulfate for bisphenol A degradation

Bifunctional Bi₁₂O₁₇Cl₂/MIL-100(Fe) composite (BMx) was firstly constructed via facile ball-milling method. The optimal BM200 was highly efficient for Cr(VI) sequestration and activation of persulfate (PS) for bisphenol A (BPA) decomposition under white light illumination, which was much more remarkable than the pristine MIL-100(Fe) and Bi₁₂O₁₇Cl₂, respectively. Furthermore, the photocatalytic reduction efficiency can be significantly improved via the addition of some green small organic acids (SOAs). As well, the BPA degradation can be achieved over an extensive initial pH range of 3.0-11.0. When the PS concentration increased to more than 2.0 mM, the BPA degradation efficiency decreased due to the SO₄^-• self-scavenging effect. It was also found that the co-existence of inorganic anions like H₂PO₄^-, HCO₃^-, SO₄^2-, Cl^- and NO₃^- could decelerate the BPA degradation. The excellent photocatalytic Cr(VI) reduction and persulfate activation performances originated from both MIL-100(Fe) with excellent PS activation ability and Bi₁₂O₁₇Cl₂ with a favorable band position, which not only enabled the efficient separation of charges but also accelerated the formation of SO₄^-• radicals. The BM200 displayed prominent stability and recyclability. More importantly, the credible degradation pathway was proposed based on UHPLC-MS analysis and DFT calculation. This research revealed that the Fe-based MOFs/bismuth-rich bismuth oxyhalides (Bi_xO_yX_z, X = Cl, Br and I) composites possessed great potential in wastewater remediation.

Electrodisinfection of bacteria-laden in surface water using modified Ti electrode by antimony-and nickel-doped tin oxide composite

Providing clean and safe drinking water by point of use (POU) disinfection methods has become a critical issue, especially in crises and epidemics. In this study, antimony-and nickel-doped tin oxide electrode (Ni-Sb-SnO₂) was employed as an electrode for electro-catalytic disinfection of surface water. The synthetized electrodes were characterized using scanning electron microscope, linear sweep voltammetry and X-Ray diffraction techniques. The results revealed that the highest electrochemical disinfection efficiency was achieved by the Ni-Sb-SnO₂ electrode under weak acidic conditions and its performance decreased with increasing pH towards alkaline environment. Based on the results, total coliform (TC) and fecal coliform (FC) were completely removed at current density of 0.67 mA cm^-2. Moreover, the electrochemical disinfection of microorganisms showed that the process efficiency was directly proportional to increasing time and at 0.6 C cm^-2 of charge passed, 3-log removal of the both indicators occurred after 15 min. The highest removal efficiency of TC and FC was also achieved at 8 mmol of NaCl concentration at <10 min of detention time. The results of this study depicted that the Ti/Ni-Sb-SnO₂ electrode provides higher disinfection efficiency for the removal of TC and FC compared with Ti and SS/PbO₂ electrodes. Moreover, the proposed system was able to completely eliminate heterotrophic, Streptococcus faecalis and Pseudomonas aerogenes indicators under optimal conditions. Therefore, it can be concluded that the proposed electrochemical system can be efficiency applied as a POU disinfection system for disinfection of water contaminated with microbial indicators, especially for crises and epidemics.

Novel Disinfection Byproducts Formed from the Pharmaceutical Gemfibrozil Are Bioaccumulative and Elicit Increased Toxicity Relative to the Parent Compound in Marine Polychaetes (Neanthes arenaceodentata)

Formation of halogenated disinfection byproducts (DBPs) from pharmaceutically active compounds has been observed in water supply systems following wastewater chlorination. Although research has been limited thus far, several studies have shown that halogenated DBPs may elicit increased toxicity compared to their parent compounds. For example, the lipid regulator gemfibrozil has been shown to form chlorogemfibrozil (Cl-gemfibrozil) and bromogemfibrozil (Br-gemfibrozil) following chlorination, which are more potent antiandrogens in male Japanese medaka (Oryzias latipes) compared to their parent compounds. In the present study, we aimed to characterize the bioaccumulative ability of halogenated gemfibrozil DBPs in marine polychaetes via chronic sediment exposures and, consequently, to assess the chronic and acute toxicity of halogenated gemfibrozil DBPs through sediment (in vivo) and aqueous (in vivo and in silico) toxicity evaluations. Following 28 day sediment exposures, Cl-gemfibrozil and Br-gemfibrozil bioaccumulated within Neanthes arenaceodentata, with both compounds reducing survival and growth. The biota-sediment accumulation factors determined for Cl-gemfibrozil and Br-gemfibrozil were 2.59 and 6.86, respectively. Furthermore, aqueous 96 h toxicity tests with N. arenaceodentata indicated that gemfibrozil DBPs elicited increased toxicity compared to the parent compound. While gemfibrozil had an acute LC50 value of 469.85 ± 0.096 mg/L, Cl-gemfibrozil and Br-gemfibrozil had LC50 values of 12.34 ± 0.085 and 9.54 ± 0.086 mg/L, respectively. Although acute toxicity is relatively low, our results indicate that halogenated gemfibrozil DBPs are bioaccumulative and may elicit effects in apex food web organisms prone to accumulation following lifelong exposures.

Effect-Based Identification of Hazardous Antibiotic Transformation Products after Water Chlorination

Antibiotic transformation products (TPs) generated during water treatment can be considered as an environmental concern, since they can retain part of the bioactivity of the parent compound. Effect-directed analysis (EDA) was applied for the identification of bioactive intermediates of azithromycin (AZI) and ciprofloxacin (CFC) after water chlorination. Fractionation of samples allowed the identification of bioactive intermediates by measuring the antibiotic activity and acute toxicity, combined with an automated suspect screening approach for chemical analysis. While the removal of AZI was in line with the decrease of bioactivity in chlorinated samples, an increase of bioactivity after complete removal of CFC was observed (at >0.5 mgCl₂/L). Principal component analysis (PCA) revealed that some of the CFC intermediates could contribute to the overall toxicity of the chlorinated samples. Fractionation of bioactive samples identified that the chlorinated TP296 (generated from the destruction of the CFC piperazine ring) maintained 41%, 44%, and 30% of the antibiotic activity of the parent compound in chlorinated samples at 2.0, 3.0, and 4.0 mgCl₂/L, respectively. These results indicate the spectrum of antibacterial activity can be altered by controlling the chemical substituents and configuration of the CFC structure with chlorine. On the other hand, the potential presence of volatile DBPs and fractionation losses do not allow for tentative confirmation of the main intermediates contributing to the acute toxic effects measured in chlorinated samples. Our results encourage further development of new and advanced methodologies to study the bioactivity of isolated unknown TPs to understand their hazardous effects in treated effluents.

Tris(4-hydroxyphenyl)ethane (THPE), a trisphenol compound, is antiestrogenic and can retard uterine development in CD-1 mice

Tris (4-hydroxyphenyl)ethane (THPE), a trisphenol compound widely used as a branching agent and raw material in plastics, adhesives, and coatings is rarely regarded with concern. However, inspection of in vitro data suggests that THPE is an antagonist of estrogen receptors (ERs). Accordingly, we aimed to evaluate the antiestrogenicity of THPE in vivo and tested its effect via oral gavage on pubertal development in female CD-1 mice. Using uterotrophic assays, we found that THPE either singly, or combined with 17β-estradiol (E₂) (400 μg/kg bw/day) suppressed the uterine weights at low doses (0.1, 0.3, and 1 mg/kg bw/day) in 3-day treatment of weaning mice. When mice were treated with THPE during adolescence (for 10 days beginning on postnatal day 24), their uterine development was significantly retarded at doses of at least 0.1 mg/kg bw/day, manifest as decreased uterine weight, atrophic endometrial stromal cells and thinner columnar epithelial cells. Transcriptome analyses of uteri demonstrated that estrogen-responsive genes were significantly downregulated by THPE. Molecular docking shows that THPE fits well into the antagonist pocket of human ERα. These results indicate that THPE possesses strong antiestrogenicity in vivo and can disrupt normal female development in mice at very low dosages.

Pilot study of global endocrine disrupting activity in Iowa public drinking water utilities using cell-based assays

Some anthropogenic substances in drinking water are known or suspected endocrine disrupting compounds (EDCs), but EDCs are not routinely measured. We conducted a pilot study of 10 public drinking water utilities in Iowa, where common contaminants (e.g., pesticides) are suspected EDCs. Raw (untreated) and finished (treated) drinking water samples were collected in spring and fall and concentrated using solid phase extraction. We assessed multiple endocrine disrupting activities using novel mammalian cell-based assays that express nuclear steroid receptors (aryl hydrocarbon [AhR], androgenic [AR], thyroid [TR], estrogenic [ER] and glucocorticoid [GR]). We quantified each receptor's activation relative to negative controls and compared activity by season and utility/sample characteristics. Among 62 samples, 69% had AhR, 52% AR, 3% TR, 2% ER, and 0% GR activity. AhR and AR activities were detected more frequently in spring (p =0 .002 and < 0.001, respectively). AR activity was more common in samples of raw water (p =0 .02) and from surface water utilities (p =0 .05), especially in fall (p =0 .03). Multivariable analyses suggested spring season, surface water, and nitrate and disinfection byproduct concentrations as determinants of bioactivity. Our results demonstrate that AR and AhR activities are commonly found in Iowa drinking water, and that their detection varies by season and utility/sample characteristics. Screening EDCs with cell-based bioassays holds promise for characterizing population exposure to diverse EDCs mixtures.

Identification of mutagenic and endocrine disrupting compounds in surface water and wastewater treatment plant effluents using high-resolution effect-directed analysis

Effect-directed analysis (EDA) has shown its added value for the detection and identification of compounds with varying toxicological properties in water quality research. However, for routine toxicity assessment of multiple toxicological endpoints, current EDA is considered labor intensive and time consuming. To achieve faster EDA and identification, a high-throughput (HT) EDA platform, coupling a downscaled luminescent Ames and cell-based reporter gene assays with a high-resolution fraction collector and UPLC-QTOF MS, was developed. The applicability of the HT-EDA platform in the analysis of aquatic samples was demonstrated by analysis of extracts from WWTP influent, effluent and surface water. Downscaled assays allowed detection of mutagenicity and androgen, estrogen and glucocorticoid agonism following high-resolution fractionation in 228 fractions. From 8 masses tentatively identified through non-target analysis, 2 masses were further investigated and chemically and biologically confirmed as the mutagen 1,2,3-benzotriazole and the androgen androstenedione. The compatibility of the high-throughput EDA platform with analysis of water samples and the incorporation of mutagenic and endocrine disruption endpoints allow for future application in routine monitoring in drinking water quality control and improved identification of (emerging) mutagens and endocrine disruptors.

Overexposure to Bisphenol A and Its Chlorinated Derivatives of Patients with End-Stage Renal Disease during Online Hemodiafiltration

The health safety conditions governing the practice of online hemodiafiltration (OL-HDF) do not yet incorporate the risks related to the presence of endocrine disruptors such as bisphenol A (BPA). The aim of this study was to assess, for the first time, the exposure to BPA but also to its chlorinated derivatives (ClxBPA) (100 times more estrogenic than BPA) during OL-HDF. We demonstrated that BPA is transmitted by the different medical devices used in OL-HDF: ultrafilters, dialysis concentrate cartridges (and not only dialyzers, as previously described). Moreover, BPA has been found in dialysis water as well as in ultrapure dialysate and replacement fluid due to contamination of water coming from municipal network. Indeed, due to contaminations provided by both ultrafilters and water, high levels of BPA were determined in the infused replacement fluid (1033 ng.L⁻¹) from the beginning of the session. Thus, our results demonstrate that dialysis water must be considered as an important exposure source to endocrine disruptors, especially since other micropollutants such as ClxBPA have also been detected in dialysis fluids. While assessment of the impact of this exposure remains to be done, these new findings should be taken into account to assess exposure risks in end-stage renal disease patients.