Relationship of heme c, nitrogen loading capacity and temperature in anammox reactor

An in-situ biochar-enhanced anaerobic membrane bioreactor for swine wastewater treatment under various organic loading rates

A biochar-assisted anaerobic membrane bioreactor (BC-AnMBR) was conducted to evaluate the performance in treating swine wastewater with different organic loading rates (OLR) ranging from 0.38 to 1.13 kg-COD/(m3.d). Results indicated that adding spent coffee grounds biochar (SCG-BC) improved the organic removal efficiency compared to the conventional AnMBR, with an overall COD removal rate of > 95.01%. Meanwhile, methane production of up to 0.22 LCH4/gCOD with an improvement of 45.45% was achieved under a high OLR of 1.13 kg-COD/(m3.d). Furthermore, the transmembrane pressure (TMP) in the BC-AnMBR system was stable at 4.5 kPa, and no irreversible membrane fouling occurred within 125 days. Microbial community analysis revealed that the addition of SCG-BC increased the relative abundance of autotrophic methanogenic archaea, particularly Methanosarcina (from 0.11% to 11.16%) and Methanothrix (from 16.34% to 24.05%). More importantly, Desulfobacterota and Firmicutes phylum with direct interspecific electron transfer (DIET) capabilities were also enriched with autotrophic methanogens. Analysis of the electron transfer pathway showed that the concentration of c-type cytochromes increased by 38.60% in the presence of SCG-BC, and thus facilitated the establishment of DIET and maintained high activity of the electron transfer system even at high OLR. In short, the BC-AnMBR system performs well under various OLR conditions and is stable in the recovery energy system for swine wastewater.

Effect of long-term dosage of hydrazine on mainstream anammox process: Biofilm characteristics and microbial community

The impact of the long-term trace hydrazine (N2H4) exogenous supplementation on activity of the anaerobic ammonium oxidation (anammox) biofilm was investigated in a moving bed biofilm reactor (MBBR) for mainstream wastewater treatment. The results of this study demonstrated that the addition of 2-5 mg/L N2H4 enhanced anammox biofilm activity, as evidenced by the augmented nitrogen removal rate (NRR), which increased from 113.4 g/(m3·d) to 126.7 g/(m3·d) with the introduction of 2 mg/L N2H4. However, a higher concentration of N2H4 (10 mg/L) suppressed anammox activity, leading to a reduced NRR of 91.5 g/(m3·d). Bioindicators revealed that the long-term addition of 2 mg/L N2H4 fostered the accumulation of anammox bacteria (AnAOB) biomass, elevating the volatile suspended solids (VSS) content by 12%. Moreover, the structural composition of extracellular polymeric substances (EPS) within the biofilm was altered, resulting in enhanced biofilm strength within the reactor. The protective mechanism of the biofilm was activated, and EPS secretion was stimulated by the continuous N2H4 supplementation. The introduction of an excess dosage of N2H4 led to alterations in the microbial communities, ultimately resulting in a decline in the performance of the reactor. These findings collectively illustrate that N2H4, as an intermediate product, can effectively enhance anammox activity within the MBBR for mainstream wastewater treatment. This study contributes to the understanding of the optimization strategies for anammox processes in wastewater treatment systems.

External redox couple enhanced anammox sludge activity at low temperature: Insight into intracellular resource synthesis

Anaerobic ammonium oxidation (anammox), an energy-efficient deamination biotechnology, faces operational challenges in low-temperature environments. Enhancing the metabolic activity of anammox bacteria (AnAOB) is pivotal for advancing its application in mainstream municipal wastewater treatment. Inspired by the metabolic adaptability of AnAOB and based on our previous findings, this work investigated the enhancement of intracellular ATP and NADH synthesis through the exogenous supply of reduced humic acid (HAred) and H2O2 redox couple, aiming to augment AnAOB activity under low-temperature conditions. Our experimental setup involved continuous dosing of 0.0067 μmol g-1 volatile suspended solid of H2O2 and 10 mg g-1 volatile suspended solid of HAred into a mainstream anammox reactor operated at 15 °C with an influent TN content of 60 mg/L. The results showed that HAred / H2O2 couple succeeded in maintaining the effluent TN at 10.72 ± 0.91 mg l-1. The specific anammox activity, ATP and NADH synthesis levels of sludge increased by 1.34, 2.33 and 6.50 folds, respectively, over the control setup devoid of the redox couple. High-throughput sequencing analysis revealed that the relative abundance of Candidatus Kuenenia after adding HAred / H2O2 couple reached 3.65 % at the end of operation, which was 5.14 folds higher than that of the control group. Further metabolomics analysis underscored an activation in the metabolism of amino acids, nucleotides, and phospholipids, which collectively enhanced the availability of ATP and NADH for the respiratory processes. These findings may provide guidance on strategy development for improving the electron transfer efficiency of AnAOB and underscore the potential of using redox couples to promote the mainstream application of anammox technology.

Formation of iron-rich encrustation layer on anammox granules for high load stress resistance: Performance, advantages, and mechanisms

Anaerobic ammonia oxidation (anammox) is a cost-effective technology but its performance can be seriously inhibited by high load stress. This study has created an innovative iron-rich encrustation layer (IEL) on the surface of anammox granules (AnGS) through the addition of a certain amount of nano zero-valent iron. The IEL was formed through the aggregation of a gel network and the binding of iron species with extracellular polymeric substances (EPS), resulting in a significant increase in settling ability, EPS secretion, and heme content. Metagenomic analysis indicated a notable rise in the functional genes associated with nitrogen andiron metabolism in IEL AnGS. Under high load stress, the ammonia removal performance of AnGS without IEL severely declined. In contrast, IEL AnGS exhibited excellent ammonia removal efficiency of over 90%. The IEL served as a protective barrier for AnGS, effectively mitigating the strong shear forces, thereby enhancing their resistance to high load stress.

The adaptive regulation mechanism of Anammox granule sludge under calcium ions stress: Defense modes transformation

Anammox granular sludge (AnGS) has received considerable attention due to its low carbon footprint (less aeration energy and carbon source consumption) and high biomass density, but growth rate and stability are still the bottlenecks of AnGS process. Calcium ion (Ca2+) is essential for the growth of anaerobic ammonium oxidation bacteria (AnAOB) and plays an important role in the formation and stability of AnGS. Response of AnGS to Ca2+ under different concentrations was comprehensively investigated by multi-spectral and metagenomics analysis in four aspects: nitrogen removal performance, surface morphology, extracellular polymeric substance (EPS) composition and characterization, and microbial community. The nitrogen removal efficiency was significantly enhanced at appropriate Ca2+ concentration (2 mmol/L), owning to the more favorable morphology and functional microbial composition of AnGS. However, the nitrogen removal performance of AnGS declined with the Ca2+concentration increased from 2 to 8 mmol/L, due to the negative effects of excess Ca2+on EPS, mass transfer efficiency, and functional microorganisms. Meanwhile, an unexpected slight "rebound" of nitrogen removal efficiency was observed at Ca2+ = 6 mmol/L and attributed to the defense mode transformation of AnGS (from "ion stabilization" to "precipitate shield" modes) against excess Ca2+ stress. Based on the findings, the response mechanism of AnGS to Ca2+ with different concentrations was established. Our results enhanced the understanding of the interaction between AnGS and Ca2+, which may be valuable for filling the theoretical gap in enhancing the granulation and stability of AnGS and providing a reference for the practical operation of the AnGS process.

Ferroheme/Ferriheme Directly Involved in the Synthesis and Decomposition of Hydrazine as an Electron Carrier during Anammox

Anammox bacteria performed the reaction of NH4+ and NO with hydrazine synthase to produce N2H4, followed by the decomposition of N2H4 with hydrazine dehydrogenase to generate N2. Ferroheme/ferriheme, which serves as the active center of both hydrazine synthase and hydrazine dehydrogenase, is thought to play a crucial role in the synthesis and decomposition of N2H4 during Anammox due to its high redox activity. However, this has yet to be proven and the exact mechanisms by which ferroheme/ferriheme is involved in the Anammox process remain unclear. In this study, abiotic and biological assays confirmed that ferroheme participated in NH4+ and NO reactions to generate N2H4 and ferriheme, and the produced N2H4 reacted with ferriheme to generate N2 and ferroheme. In other words, the ferroheme/ferriheme cycle drove the continuous reaction between NH4+ and NO. Raman, ultraviolet-visible spectroscopy, and X-ray absorption fine structure spectroscopy confirmed that ferroheme/ferriheme is involved in the synthesis and decomposition of N2H4 via the core FeII/FeIII cycle. The mechanism of ferroheme/ferriheme participation in the synthesis and decomposition of N2H4 was proposed by density functional theory calculations. These findings revealed for the first time the heme electron transfer mechanisms, which are of great significance for deepening the understanding of Anammox.

Response of nutrients removal efficiency, enzyme activities and microbial community to current and voltage in a bio-electrical anammox system

The effects of different current intensities and voltage levels on nutrient removal performance and microbial community evolution in a Bio-Electrical Anammox (BEA) membrane bioreactor (MBR) were evaluated. The nitrogen removal efficiency increased with the current intensity within the range of 64-83 mA, but this improvement was limited at the current further increased. The phosphorus removal in the BEA MBR was attributed to the release of Fe2+, which was closely associated with the applied current to the electrodes. Heme c concentration, enzyme activities, and specific anammox activity exhibited a decreasing trend, while the functional denitrification genes showed a positive correlation with rising voltage. The nitrogen removal efficiency of the BEA system initially increased and then decreased with the voltage rose from 1.5V to 3.5V, peaking at 2.0V of 94.02% ± 1.19%. Transmission electron microscopy and flow cytometry results indicated that accelerated cell apoptosis/lysis led to an irreversible collapse of the biological nitrogen removal system at 3.5V. Candidatus Brocadia was the predominant anammox bacteria in the BEA system. In contrast, closely related Candidatus Kuenenia and Chloroflexi bacteria were gradually eliminated in electrolytic environment. The abundances of Proteobacteria-affiliated denitrifiers were increased with the voltage rising since the organic matter released by the cell apoptosis/lysis was accelerated at a high voltage level.

Reactivation performance and sludge transformation after long-term storage of Partial denitrification/Anammox (PD/A) process

This study explores the startup of innovative Partial denitrification/Anammox (PD/A) process using long-term stored sludge (>2 years at 4 °C). Results indicate a swift recovery performance, characterized by a progressive increase in the activity of functional microorganisms with improved nitrogen volumetric loading rate during operation. Stable nitrogen removal efficiency of 99.6 % was attained at 14.2 °C under influent nitrate and ammonium of 120 and 100 mg/L, respectively. A distinctive transformation was observed as the initially black seeding sludge transitioned to brownish-red, accompanied by rapid sludge granulation with size notably increased from 263.1 μm (day 4) to 1255.0 μm (day 128), significantly contributing to the rapid PD/A performance recovery. Microbial community analysis revealed substantial increases in functional bacteria, Thauera (0.09 %-10.4 %) and Candidatus Brocadia (0.003 %-1.98 %), coinciding with enhanced nitrogen removal performance. Overall, this study underscores the viability of long-term stored PD/A sludge as a seed for rapid reactor startup, offering useful technical support to advance practical PD/A process implementation.

Environmental proteomics as a useful methodology for early-stage detection of stress in anammox engineered systems

Anammox bacteria are widely applied worldwide for denitrification of urban wastewater. Differently, their application in the case of industrial effluents has been more limited. Those frequently present high loads of contaminants, demanding an individual evaluation of their treatability by anammox technologies. Bioreactors setting up and recovery after contaminants-derived perturbations are slow. Also, toxicity is frequently not acute but cumulative, which causes negative macroscopic effects to appear only after medium or long-term operations. All these particularities lead to relevant economic and time losses. We hypothesized that contaminants cause changes at anammox proteome level before perturbations in the engineered systems are detectable by macroscopic analyses. In this study, we explored the usefulness of short-batch tests combined with environmental proteomics for the early detection of those changes. Copper was used as a model of stressor contaminant, and anammox granules were exposed to increasing copper concentrations including previously reported IC50 values. The proteomic results revealed that specific anammox proteins involved in stress response (bacterioferritin, universal stress protein, or superoxide dismutase) were overexpressed in as short a time as 28 h at the higher copper concentrations. Consequently, EPS production was also increased, as indicated by the alginate export family protein, polysaccharide biosynthesis protein, and sulfotransferase increased expression. The described workflow can be applied to detect early-stage stress biomarkers of the negative effect of other metals, organics, or even changes in physical-chemical parameters such as pH or temperature on anammox-engineered systems. On an industrial level, it can be of great value for decision-making, especially before dealing with new effluents on facilities, deriving important economic and time savings.

Nitrate removal by anammox bacteria utilizing photoexcited electrons via inward extracellular electron transfer channel

Dissimilatory nitrate reduction to ammonium (DNRA) has been found to occur in some anammox bacteria species, and the DNRA metabolites (nitrite and ammonium) can further be removed to nitrogen from water. However, the activation of DNRA pathway of anammox bacteria is usually limited by the access to electron donors. Herein, we constructed a photosensitized hybrid system combining anammox bacteria (Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia anammoxidans) with CdS nanoparticles semiconductor for energy-efficient NO3- removal. Such photosensitized anammox-CdS hybrid systems achieved NO3- removal with an average efficiency of 88% (the maximum of 91%) and a N2 selectivity of 72%, only with photoexcited electrons as donors. The DNRA-anammox metabolism of anammox bacteria was proved to responsible for NO3- removal via inward extracellular electron transfer channel. The greatly up-regulated genes encoding c-type cytochrome proteins (5 or 11 hemes) in the outer membrane, c-type cytochrome protein (4 hemes) and electron transport protein RnfA-E in the inner membrane, ferredoxin (2Fe-2S) in the cytoplasm and c-type cytochrome bc1 in anammoxosome membrane were supposed to play key roles in the inward extracellular electron transfer pathway. This work provides a novel insight into the design of the biotic-abiotic hybrid photosynthetic systems, and opens a new strategy for light-driven NO3- removal from the perspective of light energy input.

Analyzing the nitrogen removal performance and cold adaptation mechanism of immobilized cold-acclimation ANAMMOX granules at low temperatures

To improve the treatment performance of anaerobic ammonium oxidation (ANAMMOX) processes at low temperatures, the immobilized cold-acclimation ANAMMOX granules (R3) were prepared and their low-temperature nitrogen removal ability as well as the cold adaptation mechanism were analyzed. The results indicated that the total inorganic nitrogen (TIN) removal efficiency of R3 was significantly higher than that of R2 (cold-acclimation granules without immobilization) and R1 (common granules), especially at 11 ± 2 and 7 ± 2°C (68% and 54%). These were attributed to the remarkable biomass retention capacity of R3, high up to 4.3-4.9 mg/gVSS even at 5-18°C. Besides, higher protein (PN) content of tightly bound extracellular polymeric substances (TB-EPS) also facilitated microbial aggregation in R3. Meanwhile, R3 granules retained higher ANAMMOX activity and heme c content at 5-25°C. The original dominant ANAMMOX genus (Candidatus Kuenenia) in R3 kept higher abundance (49%-57%) at 23 ± 2 and 16 ± 2°C, whereas Candidatus Brocadia became the dominant ANAMMOX genus (25%-32%) in R3 at 11 ± 2 and 7 ± 2°C. Notably, different ANAMMOX genera in R3 may adapt to cold environment by regulating the expression of cold-stress proteins (CspA, CspB, PpiD, and UspA). PRACTITIONER POINTS: Immobilized cold-acclimation ANAMMOX granules showed higher nitrogen removal efficiency at 23°C → 5°C. Immobilization method effectively retained biomass (Candidatus Kuenenia and Candidatus Brocadia). Immobilization facilitated TB-EPS release and biological aggregation in cold-acclimation granules. Expression of cold-stress proteins in immobilized cold-acclimation granules was more active.

Enhancing start-up strategies for anammox granular sludge systems: A review

The anaerobic ammonium oxidation (anammox) process has been developed as one of the optimal alternatives to the conventional biological nitrogen removal process because of its high nitrogen removal capacity and low energy consumption. However, the slow growth rate of anammox bacteria and its high sensitivity to environmental changes have resulted in fewer anammox sludge sources for process start-up and a lengthy start-up period. Given that anammox microorganisms tend to aggregate, granular-anammox sludge is a frequent byproduct of the anammox process. In this study, we review state-of-the-art strategies for promoting the formation of anammox granules and the start-up of the anammox process based on the literature of the past decade. These strategies are categorized as the transformation of alternative sludge, the addition of accelerators, the introduction of functional carriers, and the implementation of other physical methods. In addition, the formation mechanism of anammox granules, the operational performance of various strategies, and their promotion mechanisms are introduced. Finally, prospects are presented to indicate the gaps in contemporary research and the potential future research directions. This review functions as a summary guideline and theoretical reference for the cultivation of granular-anammox sludge, the start-up of the anammox process, and its practical application.

Improved regression model for anaerobic ammonium oxidation by repeated and prolonged batch assay under stressful salinity and pH conditions

The aim of this study was to propose repeated and prolonged batch (RPB) assay as a promising specific anammox activity (SAA) methodology assessing the anammox activity under stressed salinity and pH conditions. Response surface analysis (RSA) was used as a regression tool to evaluate statistical significance. The feasibility of RPB was investigated at 0 to 15 g-NaCl/L of salinity and pH 6 to 8 with reflecting the results of preliminary SAA. As a result, conventional SAA was statistically insignificant. In addition, the RSA results obtained from repeated batch did not meet the statistical significance despite ten times iterative reaction. Interestingly, the RPB assay (i.e., applied both repeated and prolonged reaction) was effective to obtain the reliable results. Candidadus Brocadia and Candidadus Jettenia were functional anammox microbiome during RPB. Outcomes of this study suggest that RPB assay can be applied to accurately determine the anammox activity under various stressful conditions.

Metagenomics insight into the long-term effect of ferrous ions on the mainstream anammox system

Anaerobic ammonium oxidation (anammox) bacteria have a high requirement for iron for their growth and metabolism. However, it remains unclear whether iron supplementation can sustain the stability of mainstream anammox systems at varying temperatures. Here, we investigated the long-term effects of Fe2+ on the mainstream anammox systems. Our findings revealed that the nitrogen removal efficiency (NRE) of the anammox system supplemented with 5 mg/L Fe2+ decreased from 76.5 ± 0.76% at 35 °C to 39.0 ± 9.9% at 25 °C. Notably, higher dosages of Fe2+ (15 mg/L and 30 mg/L) inhibited the anammox system, resulting in NREs of 15.9 ± 8.1% and 2.5 ± 1.1% at 25 °C, respectively. The results of microbial communities and function profiles suggested that the high Fe2+ dosage seriously affected the iron assimilation and utilization in the mainstream anammox system. This was evident from the decreased abundance of genes associated with Fe(II) transport and uptake, which in turn hindered the biosynthesis of intracellular iron-cofactors, resulting in decrease in the absolute abundance of Candidatus Brocadia, a key anammox bacterium, as well as a decline in NRE. Furthermore, our results showed that the anammox process was more susceptible to iron supplementation at 25 °C compared to 35 °C, which may be due to the oxidative stress reactions induced by combined lowered temperature and a high Fe2+ dosage. Overall, these findings offer a deeper understanding of the effect of iron in mainstream anammox systems, which can contribute to improved stability maintenance and effectiveness of anammox processes.

Combination of sulfide-driven partial denitrification with anammox enhanced by zeolite powder for autotrophic nitrogen and sulfide removal from wastewater

Sulfide-driven partial denitrification and anaerobic ammonia oxidizing (anammox) (SPDA) is a high-efficiency technology to achieve simultaneous nitrogen and sulfide removal. Nitrite accumulation from sulfide-driven partial denitrification is the key to achieve SPDA. Zeolite powder was added to strengthen the competition of anammox bacteria against nitrite. The nitrogen removal rate (NRR) and partial denitrification efficiency in reactor was 5.18 kg-N m-3d-1 and 92.3% during 180 days of operation, higher than those without zeolite powder, indicating an improving contribution of zeolite powder. Metabolomics analysis revealed zeolite powder addition enhanced the metabolisms of amino acids, nicotinate and porphyrin through increasing glutamate content, and improved EPS secretion, heme c content and particle size. Besides, high ammonia enriched by zeolite powder was conducive to improve anammox activity and NRR. This study provides the metabolic insights into the mechanism of zeolite powder enhancing SPDA, which is meaningful towards overcoming the limitations in practical application of SDPA.

Sludge granulation in PN/A enhances nitrogen removal from mainstream anaerobically pretreated wastewater

Treating anaerobically pretreated wastewater using partial nitritation/anammox (PN/A) process faces severe challenges because of the complex syntrophic and competitive relationship among various bacteria. Results of this study suggested a continuous low dissolved oxygen (DO) concentration failed to sustain NH4+ removal (<80 %), whereas moderate DO concentrations with high aerobic periods suppressed anammox reaction. Through implementing a moderate DO concentration with low aerobic periods (MDO-LA), NH4+ and total nitrogen removal efficiency reached 91.5 ± 5.5 % and 71.3 ± 2.8 % respectively. The specific activities of ammonium-oxidizing bacteria (AOB) and anaerobic ammonium-oxidizing bacteria (AnAOB) reached 0.942 ± 0.030 and 0.277 ± 0.010 g nitrogen per gram mixed liquor volatile suspended solids, respectively, mainly because MDO-LA favored Thiothrix (filamentous bacteria) wash-out and promoted Nitrosomonas growth. Moreover, sludge granules covered by a thin exterior rim with abundant AOB were formed, favoring Ca. Brocadia growth (5.4 % to 13.2 %) and mass transfer between AOB and AnAOB, which consequently increased the expression of genes coding hydroxylamine oxidase and hydrazine synthase. Overall, achievements in this study provide a promising operating strategy for PN/A treating anaerobically pretreated wastewater.

Bioelectrochemical system for nitrogen removal: Fundamentals, current status, trends, and challenges

Biological nitrogen removal (BNR) is essential for the treatment of nitrogen-containing wastewater. However, the requirement for aeration and the addition of external carbon sources, resulting in greenhouse gas emissions and additional costs, are disadvantages of the traditional BNR process. Alternative technologies have been devised to overcome these drawbacks. Bioelectrochemical nitrogen removal (BENR) has been proposed for efficient nitrogen removal, demonstrating flexibility and versatility. BENR can be performed by combining nitrification, denitrification, anaerobic ammonium oxidation (ANAMMOX), or organic carbon oxidation. Bioelectrochemical-ANAMMOX (BE-ANAMMOX) is the most promising method for nitrogen removal, as it can directly convert NH4+ to N2 and H2 in one step when the electrode is arranged as an electron acceptor. High-value-added hydrogen can potentially be recovered with efficient nitrogen removal using this concept, maximizing the benefits of BENR. Using alternative electron acceptors, such as electrodes and metal ions, for complete total nitrogen removal is a promising technology to substitute NO2- production from NH4+ oxidation by aeration. However, the requirement of electron donors for NO3- reduction, low NH4+ removal efficiency, and low competitiveness of exoelectrogenic bacteria still remain the main obstacles. The future direction for successful BENR should aim to achieve complete anaerobic NH4+ oxidation without any electron acceptor and to maximize selectivity in H2 production. Therefore, the bioelectrochemical pathways and balances between efficient nitrogen removal and high-value-added chemical production should be further studied for carbon and energy neutralities.

Novel insight into the inhibitory effects and mechanisms of Fe(II)-mediated multi-metabolism in anaerobic ammonium oxidation (anammox)

Fe(II) participates in complex Fe-N cycles and effects on the microbial metabolism in the anaerobic ammonium oxidation (anammox) dominated system. In this study, the inhibitory effects and mechanisms of Fe(II)-mediated multi-metabolism in anammox were revealed, and the potential role of Fe(II) in the nitrogen cycle was evaluated. The results showed that the long-term accumulation of high Fe(II) concentrations (70-80 mg/L) led to a hysteretic inhibition of anammox. High Fe(II) concentrations induced the generation of high levels of intracellular ·O2-, whereas the antioxidant capacity was insufficient to eliminate the excess ·O2-, thus causing ferroptosis to anammox cells. In addition, Fe(II) was oxidized via nitrate-dependent anaerobic ferrous-oxidation (NAFO) process, and mineralized to coquimbite and phosphosiderite. They formed crusts on the surface of the sludge, leading to mass transfer obstruction. The results of the microbial analysis showed that the addition of appropriate Fe(II) increased the abundance of Candidatus Kuenenia, and served as a potential electron donor to enrich Denitratisoma, promoting anammox and NAFO coupled with nitrogen removal, while high Fe(II) concentrations reduced the enrichment level. In this study, the understanding of Fe(II)-mediated multi-metabolism in the nitrogen cycle was deepened, providing the basis for the development of Fe(II)-based anammox technologies.

Fast start-up of anammox process: Effects of extracellular polymeric substances addition on performance, granule properties, and bacterial community structure

The slow startup is the major obstacle to the application of anaerobic ammonium oxidation (anammox) process in mainstream wastewater treatment. Extracellular polymeric substances (EPS) are one potential resource for stable anammox reactor operation. Response surface analysis was used to optimize the specific anammox activity (SAA) with the addition of EPS; SAA was maximum at a temperature of 35 °C and the EPS concentration of 4 mg/L. By comparing the nitrogen removal of anammox reactors with no EPS (R0), immobilized EPS (EPS-alginate beads) (R1), and liquid EPS (R2), we found that EPS-alginate beads significantly speed up the startup of anammox process and enable the start time to be shortened from 31 to 19 days. As a result of the higher MLVSS content, higher zeta potential, and lower SVI₃₀, anammox granules of R1 exhibited a stronger capacity to aggregate. Moreover, EPS extracted from R1 had higher flocculation efficiencies than EPS derived from R0 and R2. Phylogenetic analysis of 16S rRNA genes revealed that the main anammox species in R1 is Kuenenia taxon. To clarify the relative significance of stochastic vs deterministic processes in the anammox community, neutral model and network analysis are employed. In R1, community assembly became more deterministic and stable than in other cultures. Our results show that EPS might inhibit heterotrophic denitrification and thereby promote anammox activity. This study suggested a quick start-up strategy for the anammox process based on resource recovery, which is helpful for environmentally sustainable and energy-efficient wastewater treatment.

A review of anammox metabolic response to environmental factors: Characteristics and mechanisms

Anaerobic ammonium oxidation (anammox) is a promising low carbon and economic biological nitrogen removal technology. Considering the anammox technology has been easily restricted by environmental factors in practical engineering applications, therefore, it is necessary to understand the metabolic response characteristics of anammox bacteria to different environmental factors, and then guide the application of the anammox process. This review presented the latest advances of the research progress of the effects of different environmental factors on the metabolic pathway of anammox bacteria. The effects as well as mechanisms of conventional environmental factors and emerging pollutants on the anammox metabolic processes were summarized. Also, the role of quorum sensing (QS) mediating the bacteria growth, gene expression and other metabolic process in the anammox system were also reviewed. Finally, interaction and cross-feeding mechanisms of microbial communities in the anammox system were discussed. This review systematically summarized the variations of metabolic mechanism response to the external environment and cross-feeding interactions in the anammox process, which would provide an in-depth understanding for the anammox metabolic process and a comprehensive guidance for future anammox-related metabolic studies and engineering applications.

Metabolomics uncovers adaptation discrepancy among anammox granular sludge with different granule size: Metabolic pathway regulation by consortia cooperation

The relationship between granular size and anaerobic ammonium oxidation (anammox) performance in the anammox granular sludge (AnGS) system has been extensively observed. However, the metabolic pathways regulated by communication and cross-feedings among anammox consortia remain unclear. The reactor operation and metabolomics analyses were combined to explore the influence of microbiota cooperation on metabolic pathways and granule properties under low temperature (18 °C) and nitrite inhibition. Anammox activity was sustained under challenging circumstances by active quorum sensing among anammox consortia in AnGS with diameters larger than 1.4 mm, which promoted nucleotide metabolism. Cross-feedings among anammox consortia increased the levels of molybdopterin cofactor and folate meanwhile decreasing the cost of carbon fixation metabolism, which supported anabolism and maintained the content of heme c and extracellular polymeric substance. These metabolic insights into the AnGS system provide a new view for anammox process overcoming the low temperature and nitrite stress.

Carrier type affects anammox community assembly, species interactions and nitrogen conversion

The impacts of carrier type on anammox community assembly, species interactions and nitrogen conversion were studied in this work. It was found that in addition to shared species with higher abundance, different carrier types recruited rare species by imposing selection pressure. Results from co-occurrence networks revealed that carrier type strongly influenced interactions between keystone species inhabiting within anammox biofilm through potentially inducing niche differences. Overall, elastic cubic sponges would lead to closer cooperation between different populations, whereas plastic hollow cylinders would trigger fiercer competition. Meanwhile, the results based on metagenomics sequencing showed carrier type significantly affected nitrogen conversion related genes abundances, and higher reads number was detected on the elastic cubic sponges. The information obtained in this work could provide some valuable information for the selection and optimization of carrier type in the anammox process.

Characterization of magnetite assisted anammox granules based on in-depth analysis of extracellular polymeric substance (EPS)

Magnetite can be considered as an iron-rich carrier particles that can be ionized into Fe²⁺ and Fe³⁺ which improves the activity and aggregation of anammox bacteria. Three samples from this carrier assisted granulation reactor with size groups including Flocs, FL (0-300 µm), Small Granules, SG (300-500 µm) and Large Granules, LG (500-1000 µm) were used in this study. It was observed that as the granule size increased, the iron-rich carrier content increased, and their active crystals improved the microbial cell density. Specific anammox activity (SAA) was 34.63 ± 5.02, 55.29 ± 5.14, and 63.81 ± 7.50 mg-N/g-VSS/d for FL, SG and LG, respectively. In addition, in heme c content of LG was 31.5 % higher than SG and 62.9 % higher than FL. An in-depth study into the extracellular polymeric substances (EPS) showed that the secretion intensity of essential proteins followed the order of FL < SG < LG in loosely bound EPS and FL > SG > LG in tightly bound EPS. Functional group analysis confirmed that the hydrophobic CN and NH stretching vibration band had almost 3.5 times higher transmittance intensity in LG than the other sizes and the corresponding ratio of α-helix/(β sheet + random coil) in secondary derivative proteins analysis showed tightness in the protein structures of FL. The relative abundance of Brocadia Sinica increased from 0 % in FL to a high of 20.46 % in LG. This study aims to communicate the essence of in-depth EPS analysis beyond the usual EPS yield and major contents of proteins (PN) and polysaccharides (PS) analysis.

Dosing with pyrite significantly increases anammox performance: Its role in the electron transfer enhancement and the functions of the Fe-N-S cycle

Anaerobic ammonium oxidation (anammox) represents an energy-efficient process for biological nitrogen removal from ammonium-rich wastewater. However, there are mechanistic issues unsolved regarding the low microbial electron transfer and undesired accumulation of nitrate in treated water, limiting its widespread engineering applications. We found that the addition of pyrite (1 g L^-1 reactor), an earth-abundant iron-bearing sulfide mineral, to the anammox system significantly improved the nitrogen removal rate by 52% in long-term operation at a high substrate shock loading (3.86 kg N m^-3 d^-1). Two lines of evidence were presented to unravel the underlying mechanisms of the pyrite-induced enhancement. Physiochemical evidence indicated that an increase of cytochromes c and Fe-S protein was responsible for the accelerated electron transfer among metabolic enzymes. Multi-omics evidence showed that the depletion of nitrate was attributed to the Fe-N-S cycle driven by nitrate-dependent Fe(II) oxidation and S-based denitrification. This study deepens our understanding of the roles of electron transfer and the Fe-N-S cycle in anammox systems, providing a fundamental basis for the development of mediators in the anammox process for practical implications.

Establishment of anammox coupled with sulfide-depending autotrophic denitrification process and its efficient pollutants removal performance

Nitrogen and sulfur pollutants coexist in many industrial wastewaters, which may cause serious water pollution issues. In this study, Anammox coupled with sulfide-depending autotrophic denitrification process (coupling process) was established by adding sulfide to an Anammox system in a membrane bioreactor. Variations in nitrogen and sulfur removal performance, extracellular polymeric substances (EPS), key enzyme activities, and microbial components were analyzed. The sulfide in 25.0 mg L^-1 successfully induced denitrification, and then helped establish the coupling process. This process achieved 96.1% TN removal and complete sulfide removal when the sulfide was increased to 100.0 mg L^-1. The protein and polysaccharide in EPS gradually increased to 2.0 and 4.9 mg g^-1 SS, respectively. The hydroxylamine oxidoreductase activity, Heme-c content, nitrite reductase activity, and nitrate reductase activity slightly decreased to 19.1 EU g^-1 SS, 0.001 mmol g^-1 SS, 0.002 μg min^-1 mg^-1 protein, and 0.005 μg min^-1 mg^-1 protein, respectively, indicating the slight suppression of sulfide in high concentration on the coupling process. However, after acclimatization, the Anammox and denitrifying bacteria interacted and cooperatively contributed to the simultaneous nitrogen and sulfur removal, with relative abundances of Thiobacillus-denitrifying bacteria and Candidatus Kuenenia-Anammox bacteria of 31.7% and 9.0%, respectively. The establishing strategy was proposed and then verified in another Anammox system, in which the coupling process was also established, with TN removal increasing from 73.4% to 82.5%.

Metabolomic pathway regulation to achieve optimal control of inorganic carbon in anammox process

The significance of inorganic carbon (IC) for anaerobic ammonium oxidation (anammox) bacteria has been verified. However, the regulation of metabolic pathways under IC stress is not clear, limiting the optimization of IC supply. In this study, the regulatory pathways at IC concentration of 5-150 mg/L were explored to achieve optimal control of IC. The results show that the changes of metabolic pathway under IC stress determined anammox characteristics. At IC concentration of 5 mg/L, the anammox activity distinctly decreased due to the guanosine tetraphosphate (ppGpp) -mediated regulation under IC limitation. With less than 15 mg/L of IC, the decrease of carbon fixation limited the biosynthesis of gluconeogenesis and amino acids, causing the decline of extracellular polymeric substance synthesis. With more than 50 mg/L of IC, the improvement of purine and pyrimidine metabolism enhanced the electron transport capacity and growth potential of anammox bacteria. This study provides metabolic insights into IC influence on anammox consortia and a novel method of IC concentration optimization using metabolomics analysis.

Anammox-based granulation cycle for sustainable granular sludge biotechnology from mechanisms to strategies: A critical review

Anaerobic ammonium oxidation (anammox) granular sludge is a promising biotechnological process for treating low-carbon nitrogenous wastewater, and is featured with low energy consumption and footprint. Previous theoretical and experimental research on anammox granular sludge processes mainly focused on granulation (flocs → granules), but pay little attention to the granulation cycle including granulation and regeneration. This work reviewed the previous studies from the perspective of anammox granules lifecycle and proposed various sustainable formation mechanisms of anammox granules. By reviewing the anaerobic, aerobic, and anammox granulation mechanisms, we summarize the mechanisms of thermodynamic theory, heterogeneous growth, extracellular polymeric substance (EPS)-based adhesion, quorum sensing (QS)-based regulation, biomineralization-based growth, and stratification of microorganisms to understand anammox granulation. In the regeneration process, the formation of precursors for re-granulation is explained by the mechanisms of physical crushing, quorum quenching and dispersion cue sensing. Based on the granulation cycle mechanism, the rebuilding of the normal regeneration process is considered essential to avoid granule floatation and the wash-out of granules. This comprehensive review indicates that future research on anammox granulation cycle should focus on the effects of filamentous bacteria in denitrification-anammox granulation cycle, the role of QS/ quorum quenching (QQ)-based autoinducers, development of diversified mechanisms to understand the cycle and the cycle mechanisms of stored granules.

Fast start-up of ANAMMOX biofilm processes at low temperatures by economical quorum sensing regulation: The importance of endogenous N-acyl-homoserine lactones from enhanced inoculated sludge

The start-up of anaerobic ammonia oxidation (ANAMMOX) processes at low temperatures is quite difficult. In this study, the fast start-up (43 days) of ANAMMOX biofilm processes at 18 ± 3 °C was achieved by adding enhanced ANAMMOX granules (LT-granules) into the inoculated denitrification sludge. The results showed that the addition of LT-granules significantly reduced the duration of the three start-up phases (cell lysis phase, activity lag phase, and activity elevation phase) of reactor R₂ compared with the control group R₁ without LT-granules. It was demonstrated that LT-granules released high contents of N-hexanoyl-DL-homoserine lactone (C6-HSL), N-octanoyl-DL-homoserine lactone (C8-HSL), and N-3-oxohexanoyl-L-homoserine lactone (3OC6-HSL). The C6-HSL and C8-HSL from LT-granules were strongly positively correlated with the concentrations of polysaccharides (TB-PS) and proteins (TB-PN) in tightly bound extracellular polymeric substances (TB-EPS) in R₂ biofilms, respectively. Thus, LT-granules promoted the release of TB-PS and TB-PN from the biofilm in R₂ during activity lag and activity elevation phases, improving the biofilm adhesion performance. Furthermore, it was proved that the C6-HSL, C8-HSL, and 3OC6-HSL from LT-granules significantly stimulated the relative abundance of Candidatus Brocadia genus and the expression of functional genes hzo and hzsA in R₂ biofilms during activity lag and activity elevation phases. These are the main reasons why adding LT-granules promoted the start-up of reactor R₂ at 18 ± 3 °C effectively. This study is the first work to accelerate the start-up of the ANAMMOX biofilm system at the low temperature by the economical quorum sensing (QS) regulation based on endogenous N-acyl-homoserine lactone signals (AHLs) and supply a new way for the rapid start-up of ANAMMOX processes in the low-temperature environment.

Activity enhancement and the anammox mechanism under low temperature via PVA-SA and nano Fe2O3-PVA-SA entrapped beads

Anaerobic ammonia-oxidizing bacteria (AAOB) have a long growth time and low activity at low temperatures. In suspended systems, sludge is easily lost, which limits the mainstream application of anaerobic ammonia oxidation (anammox).Entrapment provides effective ideas for solving these problems. In this study, polyvinyl‑sodium alginate (PVA-SA) and nano Fe₂O₃-PVA-SA entrapment beads were prepared to discuss the effectiveness of entrapment enhanced anammox sludge at low temperatures. The differences in the entrapped beads and granules were compared to analyze the strengthening mechanism. The results show that the nitrogen removal performance of granules, PVA-SA and nano Fe₂O₃-PVA-SA entrapped beads, first decreased and then increased during the cooling and low-temperature operation. Nano Fe₂O₃-PVA-SA entrapped beads showed the smallest decline and the highest degree of recovery. Reaction metering ratio (△NO₂^--N/△NH₄⁺-N and △NO₃^--N/△NH₄⁺-N) showed that entrapment could realize Nitrite oxidizing bacteria (NOB) inhibition and improve the activity of denitrifying bacteria (DNB) to promote the removal of total nitrogen by providing a strict anaerobic environment. The results demonstrate that entrapment is beneficial for maintaining the content of heme c, specifically, nano Fe₂O₃ can stimulate its production, and is beneficial for alleviating the reduction of hydrazine dehydrogenase (HDH) enzyme activity. The extracellular polymeric substances (EPS) content and analysis showed that entrapment does not change the composition of EPS, and can maintain the EPS content. Nano Fe₂O₃ can stimulate AAOB to secrete more EPS to maintain sludge stability. From a molecular perspective, entrapment can maintain the expression of functional genes, promote the enrichment of AAOB, thus improving the nitrogen removal performance from the dual perspectives of "quality" and "quantity".

Insights into rapidly recovering the autotrophic nitrogen removal performance of single-stage partial nitritation-anammox systems: Reconstructing granular sludge and its functional microbes synergy

Partial nitritation-anammox (PNA) deteriorates easily and is difficult to recover. After an airlift inner-circulation partition bioreactor was impacted by low NH₄⁺-N wastewater containing organic matter, Nitrospira and Denitratisoma propagated rapidly, granular sludge disintegrated, and the total nitrogen removal efficiency (TNRE) decreased from 68.27 % to 5.97 %. This study used a unique strategy to recover deteriorated single-stage PNA systems and explored the mechanism of rapid performance recovery. The TNRE of the system recovered up to 61.77 % in 43 days. The high nitrogen loading rate and hydraulic shear force from the airlift caused the sludge in the reactor to granulate again. The microbial community structure recovered, with a decrease in the abundance of Nitrospira (0.05 %) and enrichment of Candidatus Brocadia (8.82 %). A favorable synergy among functional microbes in the reactor was thus re-established, promoting the rapid recovery of the nitrogen removal performance. This study provides a feasible recovery strategy for PNA processes.

Influence of low air pressure on combined nitritation and anaerobic ammonium oxidation process

At high altitude, wastewater aeration efficiency is low, which is detrimental to nitrification in conventional biological nitrogen removal. The combined partial nitritation and anaerobic ammonium oxidation (CPNA) process requires little oxygen and can be appropriate in low-pressure conditions. As such, in this study, we investigated the effect of air pressure on CPNA using a laboratory-scale reactor. We found that low air pressure promoted the removal of total inorganic nitrogen (TIN), achieving a TIN removal rate of 43,000 mg·N/(kg·VSS·d). The secretion of extracellular polymeric substances under low air pressure was not significantly different from that under ordinary air pressure, indicating no adverse effects on microbial aggregation ability, stability, or settleability. The abundance of aerobic ammonia-oxidizing bacteria (AeAOB) increased from 0.2% to 5.6%, and the activity of anaerobic ammonia-oxidizing bacteria (AnAOB) enhanced, giving AeAOB and AnAOB a competitive advantage over nitrite-oxidizing bacteria, thus forming a microbial community structure favorable to the CPNA process. Our further analysis of the results of batch tests in serum bottles confirmed the positive effect of low air pressure on the anaerobic ammonium oxidation (anammox) process, with a 28.5% ± 1.9% improvement in the specific anammox rate at 70 kPa compared with 100 kPa. AnAOB activity increased, which was reflected in the intracellular heme content increasing from 0.56 ± 0.18 μmol/(g·VSS) at 100 kPa to 2.56 ± 0.20 μmol/(g·VSS) at 70 kPa. We clarified the CPNA-process-promoting effect of low air pressure, which shows potential for nitrogen removal in high-altitude regions.

Initiating an anaerobic ammonium oxidation reactor by inoculation with starved anaerobic ammonium oxidation sludge and modified carriers

Prolonged starved anammox sludge (SAS) obtained during initial rejuvenation was inoculated into a reactor together with activated sludge (AS), anaerobic granular sludge (AGS) and modified carriers consisting of honeycomb carrier with high biological interception and activated carbon carrier with high adsorption performance. SAS accounted for 5% of the inoculated sludge. The anammox process was started and operated at around 25℃. After 160 days, the nitrogen loading rate and nitrogen removal rate reached 1.12 kgN·m^-3·d^-1 and 0.97 kgN·m^-3·d^-1, respectively. Obvious red anammox biofilms were observed on the modified carriers. Microbial community analysis showed that the relative abundance of anammox bacteria increased from < 0.1% to 22.96%. Candidatus Jettenia and Candidatus Brocadia were the dominating anammox species. This work demonstrates the potential to reuse SAS to improve the start-up efficiency of anammox reactors, which makes good economic sense.

Key enzymes involved in anammox-based processes for wastewater treatment: An applied overview

The anaerobic ammonium oxidation (anammox) process has attracted significant attention as an economic, robustness, and sustainable method for the treatment of nitrogen (N)-rich wastewater. Anammox bacteria (AnAOB) coexist with other microorganisms, and particularly with ammonia-oxidizing bacteria (AOB) and/or heterotrophic bacteria (HB), in symbiosis in favor of the substrate requirement (ammonium and nitrite) of the AnAOB being supplied by these other organisms. The dynamics of these microbial communities have a significant effect on the N-removal performance, but the corresponding metabolic pathways are still not fully understood. These processes involve many common metabolites that may act as key factors to control the symbiotic interactions between these organisms, to maximize N-removal efficiency from wastewater. Therefore, this work overviews the current state of knowledge about the metabolism of these microorganisms including key enzymes and intermediate metabolites and summarizes already reported experiences based on the employment of certain metabolites for the improvement of N-removal using anammox-based processes. PRACTITIONER POINTS: Approaches knowledge about the biochemistry and metabolic pathways involved in anammox-based processes. Some molecular tools can be used to determine enzymatic activity, serving as an optimization in nitrogen removal processes. Enzymatic evaluation allied to the physical-chemical and biomolecular analysis of the nitrogen removal processes expands the application in different effluents.

Novel strategy for rapid start-up and stable operation of anammox: Negative pressure coupled with the direct-current electric field

An application challenge of anaerobic ammonia oxidation (anammox) is the slow proliferation rate of anaerobic ammonium oxidation bacteria (AnAOB). This study adopted negative pressure coupled with the direct-current electric field (NP-DCEF) to evaluate system nitrogen removal performance. Results showed that the total nitrogen removal rate (TNRR) of the NP-DCEF system was stable at 88.6% after seven days. Compared with that of the ordinary operating system (45.4%), the relative abundance of Candidatus-kuenenia considerably increased from 51.9% to 57.6%. Under transient and long-term influent fluctuation, the NP-DCEF system showed high nitrogen removal performance. The specific activity of AnAOB (SAA) reached 11.0 mg N∙g Vss^-1 h^-1 under load fluctuation, and it was 8.7 mg N∙g Vss^-1 h^-1 under ordinary operational conditions. In addition, the specific activities of hydrazine dehydrogenase (HDH) and hydrazine synthetase (HZS) reached 32.66 and 92.95 U∙L^-1, which are considerably higher than those under the ordinary operating conditions (18.41 and 63.20 U∙L^-1). These results indicated that the novel operation strategy has specific feasibility and potential for the start-up and long-term operation of anammox.

Combined machine learning and biomolecular analysis for stability assessment of anaerobic ammonium oxidation under salt stress

In this study, the stability of the total nitrogen removal efficiency (TNRE) was modeled using an artificial neural network (ANN)-based binary classification model for the anaerobic ammonium oxidation (AMX) process under saline conditions. The TNRE was stabilized to 80.2 ± 11.4% at the final phase under the salinity of 1.0 ± 0.02%. The results of terminal restriction fragment length polymorphism (T-RFLP) analysis showed the predominance of Candidatus Jettenia genus. Real-time quantitative PCR analysis revealed the average abundance of Ca. Jettenia and Kuenenia spp. increased in 3.2 ± 5.4 × 10⁸ and 2.0 ± 2.2 × 10⁵ copies/mL, respectively. The prediction accuracy using operational parameters with data augmentation was 88.2%. However, integration with T-RFLP and real-time qPCR signals improved the prediction accuracy by 97.1%. This study revealed the feasible application of machine learning and biomolecular signals to the stability prediction of the AMX process under increased salinity.

Dual inner circulation and multi-partition driving single-stage autotrophic nitrogen removal in a bioreactor

The single-stage autotrophic nitrogen removal (ANR) process is impeded by a long start-up cycle and unstable operation performance. In this study, an airlift inner-circulation partition bioreactor (AIPBR) was operated continuously for 215 days to explore methods of strengthening the performance and stable operation of the single-stage ANR system. AIPBR start-up period took around 38 days, the total nitrogen removal efficiency was > 85% on day 35. With the decrease of hydraulic retention time and the increase of aeration rate, the nitrogen removal rate increased to 0.85 ± 0.02 kg-N/m³/day. The sludge morphology gradually changed into dark-red floc-coupled granular sludge. Nitrosomonas (9.95%) and Candidatus Brocadia (6.41%) were dominant in the sludge. During long-term operation, AIPBR achieved the dual inner circulation of sewage and sludge and then formed effective dissolved oxygen and sludge partitions to provide a suitable growth environment for various functional bacteria, promote synergy between them, and strengthen the ANR performance.

Biofilm growth characterization and treatment performance in a single stage partial nitritation/anammox process with a biofilm carrier

Biofilm carriers can avoid microorganism washout while maintaining a high amount of biomass, but are also associated with a long biofilm formation period and biofilm aging. A single stage partial nitritation/anammox process (single stage PN/A) reactor was setup to study the biofilm growth characterization and treatment performance under an NLR of 0.53 to 0.90 gN/L/d over one year. Biofilm growth was divided into three stages: the formation stage, maturation stage and aging stage. The initial biofilm was observed at day 84. A nitrogen removal efficiency of 83.4% was achieved at an NLR of 0.90 gN/L/d during the mature biofilm stage. Starvation, nitrogen gas accumulation and hydroxyapatite formation resulted in biofilm aging. After mechanical stirring treatment, biofilm reactivation was achieved by biofilm re-formation within one month. There is clear potential for phosphorus recovery, as indicated by the 5.24% - 6.29% phosphorus content in the biofilm (similar to the 5%-7% phosphorus content in enhanced biological phosphate removal sludge). The AnAOB genera abundance in the biofilm maintained at a high level of 18.25%-32.31%, while the abundance of AnAOB increased from the initial 4.10% to 13.78% after mechanical stirring treatment in the suspended sludge ensured biofilm reactivation. The results of this study clearly show that mechanical stirring treatment can be used to achieve the biofilm reactivation as the biofilm fills with the hollow cylindrical carrier. This study has potential as a useful reference for the realization of the wide application of the biofilm single stage PN/A process in the future.

Exerting applied voltage promotes microbial activity of marine anammox bacteria for nitrogen removal in saline wastewater treatment

To date, the application of marine anammox bacteria (MAB) is still a challenge in saline wastewater treatment due to the low growth rate and high sensitivity. Herein, bioelectrochemical system with applied voltage was exerted for the first time to promote the activity of MAB for removing nitrogen from saline wastewater. At the optimal voltage of 1.5 V, the mean total nitrogen removal rate (TNRR) reached the maximum of 0.65 kg/m³•d, which was 27.45% higher than that without applied voltage. Besides, applied voltage reduced the microbial diversity of MAB-based consortia, but the relative abundance of Candidatus Scalindua increased by 4.63% at 1.5 V compared with that without applied voltage. Also, proper applied voltage promoted the secretion of EPS and heme c, which resulted in the enhancement of MAB activity. Based on the remodified Logistic model analysis, the lag time of the nitrogen removal process was shortened by 0.72 h at the voltage of 1.5 V. Furthermore, it was found that higher voltage (> 2.0 V) had a negative effect on the MAB activity for low TNRR of 0.33 kg/m³•d (2.5 V). However, TNRR increased back to 0.61 kg/m³•d after removing the high applied voltage, which implied that the bioactivity was recoverable after being inhibited. These findings demonstrated that external electrical stimulation is an effective strategy to promote nitrogen removal and MAB activity for treating saline wastewater.

Evaluation of long-term preservation and reactivation efficiency of anaerobic ammonium oxidation (anammox) microorganisms based on activation energy

The preservation efficiency of mainstream (M-ANA) and sidestream anaerobic ammonium oxidation (anammox) (S-ANA) were evaluated based on their activation energy (E_a). The E_a of M-ANA cultivated under low nitrogen loads was lower than that of S-ANA, which greatly contributed to enhancing the viability of anammox during preservation at 4 °C. After preservation for 140 d, the decay rate (b_AN) of M-ANA ranged from 0.0012 to 0.0013/d; the b_AN of S-ANA was 0.0036-0.0041/d. The addition of hydrazine, which requires minimal energy to activate anammox metabolism, is highly beneficial for the viability of microorganisms. The low E_a of anammox contributes to efficient reactivation with rapid reactivation of heme c, and the addition of hydrazine makes the process more beneficial. Although the specific nitrogen removal rate of the M-SNA seed sludge was much lower than that of S-ANA, the rate of M-ANA became higher after 48 days of reactivation.

A review on characterizing the metabolite property of anammox sludge by spectroscopy

As one of the most promising autotrophic biological nitrogen removal technology, anaerobic ammonia oxidation (anammox) has gained intense attention for the past decades and several full-scale facilities have been implemented worldwide. However, anammox bacteria are easily affected by disturbed external environmental factors, which commonly leads to the fluctuations in reactor performance. The response of anammox sludge to external stress results in changes in components and structural characteristics of intracellular and extracellular polymer substances. Real-time and convenient spectral analysis of anammox sludge metabolites can give early warning of performance deterioration under external stresses, which is of great significance to the stable operation of bioreactor. This review summarized the research progress on characterizing the intracellular and extracellular metabolites of anammox sludge through spectroscopic techniques. The correlation between anammox sludge activity and its key metabolites was analyzed. Also, the limitations and future prospects of applying spectral analytical techniques for anammox bioreactor monitoring were discussed and outlooked. This review may provide valuable information for both scientific study and engineering application of anammox based nitrogen removal technology.

Selecting suitable seed sludge for anammox enrichment: Role of influent characteristics and reactor operational conditions

The study investigated the suitability of three different sludge collected from diverse environments for anammox process establishment. Sludge was collected from SBR (S1) treating municipal wastewater, nitrification tank (S2), denitrification tank (S3) treating fertilizer industrial wastewater. The microbial community in the seed sludge was studied. The presence of anammox bacteria was detected only in seed sludge S2 treating high NH₄⁺-N wastewater. Seed sludge S3 showed high abundance of denitrifiers due to NO₃^--N and organic carbon rich environments in denitrification tank. The anammox start-up performances of sludge were assessed. S2 achieved start-up within 65 days whereas S1 and S3 showed longer start-up period of 79 and 93 days, respectively. S1, S2, S3 achieved nitrogen removal rate of 148.84 gN m^-3day^-1, 159.70 gNm^-3day^-1 and 120.90 gNm^-3day^-1, respectively. Influent NH₄⁺-N, NO₃^--N and organic carbon concentrations governed the abundance of anammox and denitrifying bacteria in seed sludge thereby impacting the anammox start-up.

Insights into the synergy between functional microbes and dissolved oxygen partition in the single-stage partial nitritation-anammox granules system

The rapid start-up and stable operation of the single-stage partial nitritation-anammox (PNA) process remains a challenge in practical applications. An integrated investigation of nitrogen removal performance, sludge characteristics, activity and abundance, and microbial dynamics was implemented for 360 days via an airlift internal circulation reactor. During long-term operation, the reactor realized a stable dissolved oxygen (DO) partition and cultivated granular sludge. The nitrogen removal rate increased from 0.15 kg-N/m³/d to 1.24 kg-N/m³/d, and a high nitrogen removal efficiency of 82.6% was obtained. A stable DO partition further accelerated the bioreaction rates and enhanced the activity of functional microbes. The activities of ammonia oxidation and anammox reached 1.21 g-N/g-VSS/d and 1.43 g-N/g-VSS/d, respectively. Sludge granulation efficiently enriched the abundances of Candidatus Brocadia (7.4%) and Nitrosomonas (5.2%). These results demonstrated that efficient DO partition and stable culture of granular sludge could enhance the synergy of functional microbes for autotrophic nitrogen removal.

Microbial commensalism-assisted fast acclimation of HAP-anammox granules to dewatered liquid of dry methane fermentation

The treatment of a dewatered liquid of dry fermentation via the anammox process was investigated in the present study. Fast acclimation was established: within 2-months of operation, nitrogen removal rate reached 5 times (5.5 g-N/L/d) higher than it was at startup, which was achieved by inoculation with cold-stored HAP-anammox granules and inhibition control. The specific anammox activity of the dewatered liquid was highly improved and quite comparable to that of synthetic wastewater. Ca. Kuenenia with the relative abundance of 31.1% was revealed to be the only anammox genre and maintained its dominance throughout the operation. Simultaneously, Ca. D. denitrificans was proliferated, with its relative abundance increasing from 1.5% to 14.9%. The microbial co-occurrence network of HAP-anammox granules developed during the treatment of the dewatered liquid of dry fermentation. The experience of this work provides valuable strategies facilitating fast acclimation of the anammox process for the treatment of high-strength wastewater.

Responses of simultaneous anammox and denitrification (SAD) process to nitrogen loading variation: Start-up, performance, sludge morphology and microbial community dynamics

The effects of loading variation on the efficiency, EPS, sludge morphology and microbial population of simultaneous anammox and denitrification (SAD) were thoroughly investigated with the low-abundance SAD sludge. Results indicated that the first stage lasted the longest (33d), and the average removal rate of TN can be maintained above 95%. The specific anammox activity (SAA), specific denitrification activity and PN/PS continued to increase, but the excessive loading caused the effluent to deteriorate rapidly, and SAA and PN/PS also decreased slightly, but it could be recovered quickly. The contribution rate of anammox and denitrification to N removal reached 87.6% and 12.4% eventually, respectively. The abundance of AnAOB was 10.68%-18.01%, 9.01%-15.54%, 5.74%-12.88% in the upper, middle and lower layers, respectively. Candidatus Kuenenia was always the dominant AnAOB, especially after high loading inhibition. The abundance of denitrifying bacteria (mainly Bacillus, Comamonas and Denitratisoma) gradually became the highest.

Architecture of HAP-anammox granules contributed to high capacity and robustness of nitrogen removal under 7°C

The anaerobic ammonium oxidation (anammox) process is an autotrophic nitrogen removal process with great potential as a cost-effective and highly efficient technology in the wastewater treatment field. The main challenges yet to be overcome in this new frontier technology are operating at lower temperatures and achieving a high and stable nitrogen removal efficiency. In this study, an up-flow expanded bed reactor with hydroxyapatite (HAP)-anammox granules was operated for more than 200 days at 7°C. The nitrogen loading rate (NLR) was improved from 1.0 g-N/L/d to 3.6 g-N/L/d, together with a high-level nitrogen removal efficiency of 84-92%, which is the highest to date at extremely low temperatures in a continuous experiment. Candidatus Kuenenia was revealed to be the only dominant anammox genus, with a relative abundance of 35.3-37.5%. The optimal operational temperature was around 35°C and the apparent activation energy (E_a) was calculated as 78.37 kJ/mol. The three-layers architecture and architectural evolution of HAP-anammox granules into HAP-cores and peeling biofilms with outstanding settling performance were characterized. Under 7°C, the high capacity of nitrogen removal with robust removal efficiency using HAP-anammox granules was achieved.

The short-term and long-term effects of Fe(II) on the performance of anammox granules

Fe(II) is one of the commonly used additives in wastewater treatment and proved to be beneficial for promoting microbial activity. In this study, the effects of Fe(II) on the specific anammox activity (SAA) and reactor performance were proved to be concentration-dependent. In the short-term experiment, low concentration of Fe(II) (5-80 mg/L) significantly enhanced the SAA, while high concentration of Fe(II) (120-300 mg/L) inhibited the SAA. It was confirmed that anammox can be domesticated after long-term exposure to low Fe(II) concentration, and the SAA could be further enhanced by higher Fe(II) concentration in the following phases. In addition, as an important factor for anammox granulation and maintaining the SAA, the extracellular polymeric substance (EPS) was also affected by Fe(II) addition. In spite of the effects on SAA and EPS, Fe(II) was proved to be the key factor that enhances the N₂ O emission via abiotic pathway in the anammox reactor. PRACTITIONER POINTS: Low Fe(II) concentrations enhanced SAA, while high concentrations inhibited SAA. Long-term acclimatization by Fe(II) improved the tolerance of anammox to Fe(II). Fe(II) affects the amount and constituent of EPS and the performance of anammox granules. Accumulation of Fe(II) in the AAFEB reactor promoted the N₂ O emission.

Hydroxylamine addition enhances fast recovery of anammox activity suffering Cr(VI) inhibition

Hydroxylamine (NH₂OH), one of the most important intermediates of anammox was employed to test the recovery performance because of its stimulation to anammox bacteria. Batch test indicated simultaneous addition of 1.83 ~ 9.17 mg N /L NH₂OH relieved Cr(VI) inhibition because of extracellular reduction to Cr(III). The recovery efficiency (RE) was over 166%, with the effluent Cr(VI) and Cr(III) below 0.25 and 0.12 mg/L, respectively. Anammox activity after Cr(VI) inhibition was effectively recovered by 8 mg N/L NH₂OH with RE at 218%. The long-term operation showed 1 ~ 2 mg N/L NH₂OH accelerated the recover speed of nitrogen removal rate with 2.84 folds, as well as improving NH₄⁺ conversion ratio and reducing NO₃^- production. After 55 days recovery, extracellular polymeric substance concentration, anammox activity and heme content recovered better with NH₂OH addition. This study will provide the theoretical basis for rapid recovery of anammox activity by NH₂OH when suffering Cr(VI) inhibition.

Antibiotic resistance genes attenuation in anaerobic microorganisms during iron uptake from zero valent iron: An iron-dependent form of homeostasis and roles as regulators

Zero valent iron (ZVI) has been previously documented to attenuate the propagation of antibiotic resistance genes (ARGs) in microbes, while how ZVI affects the evolution of ARGs remains unclear. Herein, we investigated the influences of ZVI on ARGs dissemination in anaerobic bioreactor treating oxytetracycline (tet) containing wastewater, by deciphering the roles of iron homeostasis and regulatory effects. A net reduction of tet gene targets ranging from 0.75 to 1.88 and 0.67 to 2.08 log unit in intracellular and extracellular DNA was achieved at the optimal dosage of 5 g/L ZVI, whereas 20 g/L ZVI made no effects on ARGs reduction. The reduced ARGs abundance by ZVI was directly related to the inhibited horizontal transfer of ARGs and decreased proliferation of resistant strains (mainly Paludibacter and WCHB1-32). The potential mechanisms included the increased antioxidant capacity, the depressed efflux pump system and the weakened energy driving force by Fur regulon in microbes (especially for Cloacibacterium and Dechloromonas). The negligible influence of 20 g/L ZVI on ARGs reduction was ascribed to the iron-catalyzed oxidative damage and reduced physiological activity. This study firstly illustrated the potential relationships among activation of iron uptake regulator leading to protection against oxidative stress, alternation of physiological metabolisms and reduction of ARGs dissemination. This work extents our understanding about the priority of ZVI in mitigating ARGs proliferation and sheds light on its potential application in wastewater treatment plants.

Formation Mechanism of hydroxyapatite encapsulation in Anammox-HAP Coupled Granular Sludge

The potential of the formation of anammox-hydroxyapatite (HAP) granule composites as a cost-effective approach to removing nitrogen and phosphorus in the treatment of wastewater has been recently reported. Before these annamox granules, which consist of an anammox biofilm layer and an HAP crystallizing layer, can be used in applications, the formation mechanism of hydroxyapatite (HAP) encapsulation in the granules needs to be further studied. In this work, the role of extracellular polymeric substance (EPS) secreted by microorganisms and HAP core in Ca and P removal in anammox-HAP coupled granular sludge was investigated. According to the Lamer model, it is possible that the nucleation time of the granules becomes shorter as the crystal seeds. The enhanced buffering capacity of the granules was 0.08 mmol-H⁺ SS-g^-1 with the pH kept above 6.5 for a comfortable environment for anammox. The results of this study show that ion competition and exchange, mainly between cations of Ca²⁺ and Mg²⁺ and between anions of PO₄^3- and CO₃^2-, affects the precipitation process. The results of this study indicate that the addition of granule crystal seeds can be used as a strategy to hasten the anammox process, and therefore accelerate the overall process.