Superparamagnetic nanosorbent for water purification: Assessment of the adsorptive removal of lead and methyl orange from aqueous solutions

Innovations and challenges in adsorption-based wastewater remediation: A comprehensive review

Water contamination is an escalating emergency confronting communities worldwide. While traditional adsorbents have laid the groundwork for effective water purification, their selectivity, capacity, and sustainability limitations have driven the search for more advanced solutions. Despite many technological advancements, economic, environmental, and regulatory hurdles challenge the practical application of advanced adsorption techniques in large-scale water treatment. Integrating nanotechnology, advanced material fabrication techniques, and data-driven design enabled by artificial intelligence (AI) and machine learning (ML) have led to a new generation of optimized, high-performance adsorbents. These advanced materials leverage properties like high surface area, tailored pore structures, and functionalized surfaces to capture diverse water contaminants efficiently. With a focus on sustainability and effectiveness, this review highlights the transformative potential of these advanced materials in setting new benchmarks for water purification technologies. This article delivers an in-depth exploration of the current landscape and future directions of adsorbent technology for water remediation, advocating for a multidisciplinary approach to overcome existing barriers in large-scale water treatment applications.

Synthesis, Surface Modification and Magnetic Properties Analysis of Heat-Generating Cobalt-Substituted Magnetite Nanoparticles

Here, we present the results of the synthesis, surface modification, and properties analysis of magnetite-based nanoparticles, specifically Co0.047Fe2.953O4 (S1) and Co0.086Fe2.914O4 (S2). These nanoparticles were synthesized using the co-precipitation method at 80 °C for 2 h. They exhibit a single-phase nature and crystallize in a spinel-type structure (space group Fd3¯m). Transmission electron microscopy analysis reveals that the particles are quasi-spherical in shape and approximately 11 nm in size. An observed increase in saturation magnetization, coercivity, remanence, and blocking temperature in S2 compared to S1 can be attributed to an increase in magnetocrystalline anisotropy due to the incorporation of Co ions in the crystal lattice of the parent compound (Fe3O4). The heating efficiency of the samples was determined by fitting the Box-Lucas equation to the acquired temperature curves. The calculated Specific Loss Power (SLP) values were 46 W/g and 23 W/g (under HAC = 200 Oe and f = 252 kHz) for S1 and S2, respectively. Additionally, sample S1 was coated with citric acid (Co0.047Fe2.953O4@CA) and poly(acrylic acid) (Co0.047Fe2.953O4@PAA) to obtain stable colloids for further tests for magnetic hyperthermia applications in cancer therapy. Fits of the Box-Lucas equation provided SLP values of 21 W/g and 34 W/g for CA- and PAA-coated samples, respectively. On the other hand, X-ray photoelectron spectroscopy analysis points to the catalytically active centers Fe2+/Fe3+ and Co2+/Co3+ on the particle surface, suggesting possible applications of the samples as heterogeneous self-heating catalysts in advanced oxidation processes under an AC magnetic field.

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

(3,3)-Connected Triazine-Based Covalent Organic Frameworks for Efficient CO2 Separation over N2 and Dye Adsorption

Covalent organic frameworks (COFs) are a promising class of adsorption and separation materials that can meet the needs of ecological sustainability, such as the removal of carbon dioxide and organic dyes. The two synthesized (3,3)-connected triazine-based COFs demonstrate high specific surface area and good thermal and chemical stability. COFZ1 shows good CO2 adsorption selectivities for different CO2 and N2 volume percentage systems at 273 K and 1 bar, with an ideal adsorbed solution theory (IAST) CO2 selectivity (i.e., separation factor) of 35.09 for the simulated flue gas component and a CO2 adsorption capacity of 24.21 cm3 g-1. In the aqueous dye solutions, both COFs present good adsorption performance for the selected dyes, and the maximum adsorption capacities of COFZ1 for methylene blue (MB) and gentian violet (GV) reach 510 and 564 mg g-1, respectively. Each of the two COFs shows a high anti-interference performance and excellent recyclability. The adsorption capacities of two COFs for RhB (Rhodamine B), MB, and GV hardly vary with pH values and salt concentrations. The adsorption behaviors of the two COFs for dyes follow Langmuir isothermal adsorption and quasi-secondary kinetic adsorption, approaching monolayer adsorption and chemisorption.

Research progress on the magnetite nanoparticles in the fields of water pollution control and detection

Magnetite nanoparticles (MNPs) have shown increasing application in the fields of water pollution control and detection due to their perfect combination of interfacial functionalities and physicochemical properties, such as surface interface adsorption, (synergistic) reduction, catalytic oxidation, and electrical chemistry. This review presents the research advances in the synthesis and modification methods of MNPs in recent years, systematically summarizes the performances of MNPs and their modified materials in terms of three technical systems, including single decontamination system, coupled reaction system, and electrochemical system. In addition, the progress of the key roles played by MNPs in adsorption, reduction, catalytic oxidative degradation and their coupling with zero-valent iron for the reduction of pollutants are described. Moreover, the application prospect of MNPs-based electrochemical working electrodes for detecting micro-pollutants in water were also discussed in detail. This review addresses that the construction of MNPs-based systems for water pollution control and detection should be adapted to the natures of the target pollutants in water. Finally, the following research directions of MNPs and their remaining challenges are outlooked. In general, this review will inspire MNPs researchers in different fields for effective control and detection of a variety of contaminants in water.

Magnetic silica nanoparticles adorned with a metal-organic framework; a novel nanosorbent for elimination of aqueous Pb ions contaminant

The annual growth of water pollution resulting from the uncontrolled entry of heavy metals, like Pb²⁺ ions, is one of the most critical global concerns due to its direct and indirect effects on human life. The absorption of this component by the body could affect the nervous system via oxidative stress production or disturbing cellular biological mechanism. So, it is important to find an effective method for purifying the existing waters. This study aims to fabricate and compare the effect of two new nano-adsorbents (Fe₃O₄@ZIF-8 and Fe₃O₄@SiO₂@ZIF-8) on removing Pb²⁺ ions from the aqueous solution. Accordingly, iron oxide nanoparticles were synthesized via co-precipitation method at first and then coated with a silica shell through the sol-gel method. Both nanoparticles were coated with a layer of metal-organic framework (MOF), ZIF-8, and analyzed with different physicochemical tests. In the following parts, the Pb²⁺ ion removal capability of the nano-adsorbents was evaluated in the presence of different parameters, including nanosorbent concentrations, contact time, pH, and pollutant concentrations. Results confirmed preparation of nanoparticles with a mean size of about 110 ± 10 nm and 80 ± 10 nm for Fe₃O₄@ZIF-8 and Fe₃O₄@SiO₂@ZIF-8, respectively. Both nanoparticles showed the highest amount of pollutants removal (near 90% for both nanoparticles) at pH = 6 within 15 min of contact in the presence of 100 ppm Pb²⁺ ions. Besides, in the case of real samples, with a concentration of about 150 ppm of Pb²⁺ ions, they showed maximum adsorption of about 93.61% and 99.2% for Fe₃O₄@ZIF-8 and Fe₃O₄@SiO₂@ZIF-8, respectively. The presence of iron oxide nanoparticles in the structure of this adsorbent makes it easy to separate them in a user-friendly method. A brief comparison between these nanosorbents indicates that Fe₃O₄@SiO₂@ZIF-8 nanoparticles have better performance due to their higher porosity and surface area ratio and so it could be used as a cost-effective ideal nanosorbent candidate for easy removal of heavy metals from water.

Magnetic-Transition-Metal Oxides Modified Pollen-Derived Porous Carbon for Enhanced Absorption Performance

In our work, the transition-metal-oxide precursor (TMO@BC, M = Fe, Co, Ni) has been loaded on the pollen carbon by the hydrothermal method and annealed at different temperatures to generate a composite material of metal oxide and pollen carbon in this study, which can effectively prevent agglomeration caused by a small size and magnetism. The XRD patterns of the samples showed that the as-synthesized metal oxides were γ-Fe₂O₃, CoO, and NiO. In the 20 mg/L methyl orange adsorption experiment, the adsorption amount of CoO@C at 500 ℃ reached 19.32 mg/g and the removal rate was 96.61%. Therefore, CoO@C was selected for the adsorption correlation-model-fitting analysis, which was in line with the secondary reaction. The pseudo-second-order kinetic model (R²: 0.9683-0.9964), the intraparticle diffusion model, and the Freundlich adsorption isotherm model indicated that the adsorption process was the result of both physical and chemical adsorptions, and the judgment was based on the electrostatic action. The adsorption and removal efficiency of ciprofloxacin (CIP) by changing the pH of the reaction was about 80%, so the electrostatic attraction worked, but not the main factor. Recovered by an external magnetic field, the three-time recycling efficiency was still maintained at more than 80%. This novel biomass-derived magnetic porous carbon material embedded with transition-metal-oxide nanoparticles is highly promising for many applications, especially in the field of environmental remediation.

XPS and NMR analyze the combined forms of Pb in Cladophora rupestris subcells and its detoxification

In this study, the combined forms of Pb in Cladophora rupestris (L.) (C. rupestris) were investigated via X-ray photoelectron spectroscopy (XPS) and nuclear magnetic resonance (NMR), different Pb concentrations (0, 0.5, and 5.0 mg/L), and C. rupestris subcells were explored. Results showed that combined forms of Pb mainly account for Pb-polysaccharides (Pb-OH of carbohydrates) in the cell wall, Pb-protein (Pb-N= and (C-N-)₂Pb) in the organelle, and Pb-organic acid (Pb-sulfates, (CO)₂-Pb and (COO)₂-Pb) in the soluble fraction. Pb-S-containing group (Pb-C-S) could formed in subcelluar when C. rupestris was subjected to high Pb stress. Meanwhile, Pb²⁺ could penetrate the C. rupestris cells via the formed chelate between GSH/MT and -OH functional groups. Results could help understand the role of subcellular fraction in the algae remediation and detoxification to heavy metal.

Poly-NIPAM/Fe3O4/multiwalled carbon nanotube nanocomposites for kerosene removal from water

Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H₂SO₄ and HNO₃, and the oxidized MWCNTS were decorated with magnetite (Fe₃O₄). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

Surface engineering of silica based materials with Ni-Fe layered double hydroxide for the efficient removal of methyl orange: Isotherms, kinetics, mechanism and high selectivity studies

Herein, low-cost diatomite (DE) and bentonite (BE) materials were surface modified with Ni-Fe layered double hydroxide (LDHs) (represented as NFD and NFB respectively), using a simple co-precipitation procedure for the removal of methyl orange (MO) dye from water. The adsorbents of both before and after MO adsorption have been studied by XRD, N₂ adsorption-desorption isotherm, FTIR, FESEM-EDX and XPS characterization. The zeta potential analysis was used to observe the surface charge of adsorbents within the pH ranges of 4-10. The MO removal efficiency was significantly improved after LDHs modification, showing a 94.7% and 92.6% efficiency for NFD and NFB at pH 6, respectively. Whereas bare DE and BE have shown removal efficiency of 15.5% and 4.9% respectively. The maximum adsorption capacities of NFD and NFB using the Langmuir isotherm model were found to be 246.9 mgg^-1 and 215.9 mgg^-1 respectively. The designed NFD showed high selectivity towards anionic-based dyes from water and also the effect of salts shows the dye removal percentage was increased and decreased for the addition of Na₂SO₄ and NaCl, respectively. The reusability of NFD and NFB have been studied for a maximum of five cycles and they can remove MO up to four cycles. Therefore, the designed adsorbents can be very effective towards the removal of MO from water and they may be useful for dye-based wastewater treatment.

Synthesis of tri-metallic surface engineered nanobiochar from cynodon dactylon residues in a single step - Batch and column studies for the removal of copper and lead ions

Superparamagnetic nanocomposites integrated with multiple metals, and surface engineered nanoparticles play a vital role in the removal of heavy metals. In the present study, amino-functional silica-coated magnetic nanocomposites with biochar synthesised from Cynodon dactylon plant residues are prepared in a single step reaction process. The synthesised nanocomposites are characterized using various analytical techniques such as FTIR to determine their functional entities, SEM, TEM, EDX and VSM to analyse the size (~50 nm), elements and magnetic nature of the nanocomposites. Characterization reveals that the prepared nanobiochar was coated with silica and a specific amine group. The magnetic saturation value of 50 emu/g confirms the prepared sorbent was superparamagnetic. Kinetics, isotherm and thermodynamics parameters are evaluated to study the metal interaction mechanism with the nanocomposites where the system follows pseudo-second-order kinetics and the four-parameter Fritz Schlunder model for both metal ions. The nanocomposites showed the enhanced adsorption capacity of copper (Cu(II)) ions with 220.4 mg/g and 185.4 mg/g for lead (Pb(II)) ions. The nanocomposites also showed the excessive reusing ability of 15 times with the maximum removal efficiency for Cu(II) and Pb(II) metal ions. Column studies are evaluated to demonstrate the vital performance in the removal of Cu(II) ions and the breakthrough point was inferred for the parameters such as concentration (100-300 mg/L), bed height (1-3 cm) and flow rate (2-4 mL/min). The breakthrough point was attained at 1400 min and the removal efficiency of about 64.58% was obtained.

Core-Shell Structured Magnetic Carboxymethyl Cellulose-Based Hydrogel Nanosorbents for Effective Adsorption of Methylene Blue from Aqueous Solution

This article reports effective removal of methylene blue (MB) dyes from aqueous solutions using a novel magnetic polymer nanocomposite. The core-shell structured nanosorbents was fabricated via coating Fe₃O₄ nanoparticles with a layer of hydrogel material, that synthesized by carboxymethyl cellulose cross-linked with poly(acrylic acid-co-acrylamide). Some physico-chemical properties of the nanosorbents were characterized by various testing methods. The nanosorbent could be easily separated from aqueous solutions by an external magnetic field and the mass fraction of outer hydrogel shell was 20.3 wt%. The adsorption performance was investigated as the effects of solution pH, adsorbent content, initial dye concentration, and contact time. The maximum adsorption capacity was obtained at neutral pH of 7 with a sorbent dose of 1.5 g L⁻¹. The experimental data of MB adsorption were fit to Langmuir isotherm model and Pseudo-second-order kinetic model with maximum adsorption of 34.3 mg g⁻¹. XPS technique was applied to study the mechanism of adsorption, electrostatic attraction and physically adsorption may control the adsorption behavior of the composite nanosorbents. In addition, a good reusability of 83.5% MB recovering with adsorption capacity decreasing by 16.5% over five cycles of sorption/desorption was observed.

Novel recycling of incinerated sewage sludge ash (ISSA) and waste bentonite as ceramsite for Pb-containing wastewater treatment: Performance and mechanism

With rapid economic growth and urbanisation, the reuse and recycling of solid wastes has become a high priority for the sustainable development of modern cities. In this study, two typical solid wastes, incinerated sewage sludge ash (ISSA) and waste bentonite, were co-valorised to produce granular adsorbents through a simple and energy-saving pelletisation/sintering process. A mixture of ISSA and bentonite at a weight ratio of 3:1 was pelletised and sintered at 700 °C. The resultant ceramsite, with good mechanical strength, could effectively remove Pb(Ⅱ) from aqueous solutions. The adsorption kinetics can be described by the pseudo-first-order (PFO) model. The results indicated that the Pb(Ⅱ) adsorption process was dominated by electrostatic attraction, precipitation, and complexation. The isothermal data exhibited a good correlation with the Freundlich model, indicating that the adsorption process was non-ideal and spontaneous. The maximum adsorption capacity was approximately 21.6 ± 0.35 mg/g at 318 K. After 5 cycles of regeneration, the adsorbent maintained good adsorption performance. Moreover, the removal rate was not greatly affected by ionic strength. These findings demonstrate that the granular adsorbent prepared with ISSA and waste bentonite can be recognised as a promising adsorbent for Pb-containing wastewater treatment.

Engineering Iron Oxide Nanocatalysts by a Microwave-Assisted Polyol Method for the Magnetically Induced Degradation of Organic Pollutants

Advanced oxidation processes constitute a promising alternative for the treatment of wastewater containing organic pollutants. Still, the lack of cost-effective processes has hampered the widespread use of these methodologies. Iron oxide magnetic nanoparticles stand as a great alternative since they can be engineered by different reproducible and scalable methods. The present study consists of the synthesis of single-core and multicore magnetic iron oxide nanoparticles by the microwave-assisted polyol method and their use as self-heating catalysts for the degradation of an anionic (acid orange 8) and a cationic dye (methylene blue). Decolorization of these dyes was successfully improved by subjecting the catalyst to an alternating magnetic field (AMF, 16 kA/m, 200 kHz). The sudden temperature increase at the surface of the catalyst led to an intensification of 10% in the decolorization yields using 1 g/L of catalyst, 0.3 M H₂O₂ and 500 ppm of dye. Full decolorization was achieved at 90 °C, but iron leaching (40 ppm) was detected at this temperature leading to a homogeneous Fenton process. Multicore nanoparticles showed higher degradation rates and 100% efficiencies in four reusability cycles under the AMF. The improvement of this process with AMF is a step forward into more sustainable remediation techniques.

Study of the Stability of Citrate Capped AgNPs in Several Environmental Water Matrices by Asymmetrical Flow Field Flow Fractionation

Asymmetrical flow field-flow fractionation (AF4) coupled to UV-Vis and dynamic light scattering (DLS) detectors in series, was tested for stability studies of dispersions of citrate-capped silver nanoparticles (AgNPs) in several water matrices. The main goal is to provide knowledge to understand their possible behavior in the environment for short times since mixturing (up to 180 min). Ultrapure (UPW), bottled (BW1, BW2), tap (TW), transitional (TrW) and sea water (SW) matrices were assayed. Observations were compatible with the aggregation of AgNPs, a change in the plasmon band and a size growth with time were done. Fractograms showed different evolution fingerprints in the function of the waters and batches. The aggregation rate order was BW2, SW, TrW, BW1 and TW, being BW2 the lowest and TW the highest. NP aggregation can be induced by increasing the salt concentration of the medium, however transitional and sea waters did not follow the rule. Both matrices presented a lower aggregation rate in comparison with other aqueous matrices with much lower ionic strength (BW1 and TW), which can be explained by the potential presence of dissolved organic matter and/or the high concentration of halides providing their stabilization and passivation, respectively. AF4 provides relevant information with respect to static DLS and UV-Vis Spectroscopy showing that at least two populations of aggregates with different sizes between them, depending on both, the mixture time for a given matrix and type of water matrix for the same time.

Innovative Magnetite Based Polymeric Nanocomposite for Simultaneous Removal of Methyl Orange and Hexavalent Chromium from Water

One of the most important directions for environmental remediation is the effective removal of dyes and toxic heavy metals from water using newly fabricated nanoadsorbents. Here, magnetic Fe3O4 nanoparticles were combined with nitrogen-containing functional group polymers chitosan (CS) and polypyrrole (ppy) to synthesize a nanocomposite (polypyrrole@magnetic chitosan) useful for removing methyl orange (MO) and hexavalent chromium (Cr (VI)) from water. The physicochemical properties of the nanocomposite were determined using SEM, TEM, XRD, FT–IR, and TGA techniques. The effect of different factors on the adsorption system was studied including the contact time, pH, and the effect of co-existed ions. The kinetic study illustrated that the adsorption fit well with Langmuir isotherm. The maximum adsorption capacity of MO and Cr (VI) was found to be 95 and 105 mg/g, respectively. The reusability of the nanocomposite was studied for up to five cycles using 0.1 M NaOH as eluent with a slight decrease of adsorbent efficiency. Furthermore, the removal mechanism studied suggested the removal of MO via adsorption and Cr (VI) via chemical reduction and adsorption. This study suggests that a ppy@magnetic chitosan nanocomposite is a promising nanoadsorbent for removing MO and Cr (VI) from water.

Combined forms of Pb and its detoxification and absorption in Cladophora rupestris subcells

This study aims to analyze the combined form, detoxification, and adsorption mechanism of Pb in Cladophora rupestris subcells. The chemical form analysis at different concentrations (0, 0.5, 1.0, 2.5, 5.0, 7.5, and 10 mg/L) indicated that most of the Pb (37%-76%) were integrated with oxalate and undissolved phosphate, which were important to the detoxification of C. rupestris. The characterization of Pb (0, 0.5, and 5.0 mg/L) at the subcellular was conducted via Fourier-transform infrared spectroscopy (FTIR), Three-dimensional excitation-emission matrix spectroscopy (3D-EEM), and protein secondary structure fitting. Results revealed that Pb-polysaccharides ((C₆H₅)-OO-Pb-OH, C-O-Pb, and symmetric Pb-O-Pb), Pb-functional-groups ((C₆H₅)-COO-Pb and (C₆H₅)-P = O-Pb), and Pb-protein complexes (OH-C₇H₆-CN-Pb-COOH, C₉H₁₀-NH-CN-C = O-Pb, Pb-S-C, and Pb-S) were formed. The cell wall produced transport proteins, such as metallothionein and glutathione, which bound and helped Pb²⁺ enter the cell. After entering the soluble fraction, the Pb-organic acid ((C₆H₅)-COO-Pb, (C₆H₅)-O-Pb, and (C₆H₅)-P = O-Pb) and Pb-sulfhydryl compound (Pb-S-C/Pb-S) assumed the most important role in resisting the toxicity of Pb²⁺. Pb²⁺ was absorbed in the organelle and formed (C₆H₅)-C-O-Pb and (C₆H₅)-P = O-Pb, and complexed with protein (Pb-C-N) when treated with 5.0 mg/L Pb. Results could help understand the role of subcellular fraction in the algal adaptation to stressful heavy metal conditions.

Photocatalytic Activity of Magnetic Nano-β-FeOOH/Fe3O4/Biochar Composites for the Enhanced Degradation of Methyl Orange Under Visible Light

A novel nano-β-FeOOH/Fe3O4/biochar composite with enhanced photocatalytic performance and superparamagnetism was successfully fabricated via an environmentally friendly one-step method. The structural properties of the prepared composite were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and a vibrating sample magnetometer. The XPS spectrum of the as-prepared composites confirmed the presence of Fe-O-C bonds between β-FeOOH and biochar, which could be conducive to transfer photo-generated electrons. UV-vis spectroscopy confirmed the existence of an electron-hole connection between β-FeOOH and biochar, which promoted the rapid interface transfer of photogenerated electrons from β-FeOOH to biochar. These novel structures could enhance the response of biochar to accelerate the photoelectrons under visible light for more free radicals. Electron spin resonance analysis and free radical quenching experiments showed that •OH was the primary active species in the photodegradation process of methyl orange by nano-β-FeOOH/Fe3O4/biochar. In the synergistic photocatalytic system, β-FeOOH/Fe3O4/biochar exhibited excellent catalytic activity for the degradation of azo dye (methyl orange), which is 2.03 times higher than that of the original biochar, while the surface area decreased from 1424.82 to 790.66 m2·g-1. Furthermore, β-FeOOH/Fe3O4/biochar maintained a stable structure and at least 98% catalytic activity after reuse, and it was easy to separate due to its superparamagnetism. This work highlights the enhanced photocatalytic performance of β-FeOOH/Fe3O4/biochar material, which can be used in azo dye wastewater treatment.

Selective Control over the Morphology and the Oxidation State of Iron Oxide Nanoparticles

Iron oxide nanoparticles (NPs) have been extensively used for both health and technological applications. The control over their morphology, crystal microstructure, and oxidation state is of great importance to optimize their final use. However, while mature in understanding, it is still far from complete. Here we report on the effect of the amount of 1,2-hexadecanediol and/or 1-octadecene in the reaction mixture on the thermal decomposition of iron(III) acetylacetonate in oleic acid for two series of iron oxide NPs with sizes ranging from 6 to 48 nm. We show that a low amount of either compound leads to both large, mixed-phase NPs composed of magnetite (Fe₃O₄) and wüstite (FeO) and high reaction yields. In contrast, a higher amount of either 1,2-hexadecanediol or 1-octadecene gives rise to smaller, single-phase NPs with moderate reaction yields. By infrared spectroscopy, we have elucidated the role of 1,2-hexadecanediol, which mediates the particle nucleation and growth. Finally, we have correlated the magnetic response and the structural features of the NPs for the two series of samples.

Emerging nano-structured innovative materials as adsorbents in wastewater treatment

Water supply around the globe is struggling to meet the rapidly increasing demand by the population, drastic changes in climate and degrading water quality. Even though, many large-scale methods are employed for wastewater treatment they display several negative impacts owing to the presence of pollutants. Technological innovation is required for integrated water management with different groups of nanomaterials for the removal of toxic metal ions, microbial disease, organic and inorganic solutes. The method of manipulating atoms on a nanoscale is nanotechnology. Nanomembranes are used in nanotechnology to soften water and eliminate physical, chemical and biological pollutants. The present review concentrates on various nanotechnological approaches in wastewater remedy, mechanisms involved to promote implementation, benefits and limitations in comparison with current processes, properties, barriers and commercialization research needs. Also the review identifies opportunities for further exploiting the exclusive features for green water management by following the advances in nanotechnology.

Recent Advances in Magnetic Nanoparticles and Nanocomposites for the Remediation of Water Resources

Water resources are of extreme importance for both human society and the environment. However, human activity has increasingly resulted in the contamination of these resources with a wide range of materials that can prevent their use. Nanomaterials provide a possible means to reduce this contamination, but their removal from water after use may be difficult. The addition of a magnetic character to nanomaterials makes their retrieval after use much easier. The following review comprises a short survey of the most recent reports in this field. It comprises five sections, an introduction into the theme, reports on single magnetic nanoparticles, magnetic nanocomposites containing two of more nanomaterials, magnetic nanocomposites containing material of a biologic origin and finally, observations about the reported research with a view to future developments. This review should provide a snapshot of developments in what is a vibrant and fast-moving area of research.

Magnetic β-Cyclodextrin Nanosponges for Potential Application in the Removal of the Neonicotinoid Dinotefuran from Wastewater

This article describes the use of β-cyclodextrin-based carbonate nanosponges (NSs) decorated with superparamagnetic Fe₃O₄ nanoparticles to study and investigate the potential removal of dinotefuran (DTF) from wastewater. The NS-DTF inclusion compound was characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), UV-visible spectroscopy (UV-VIS), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray powder diffraction (XRPD) and proton nuclear magnetic resonance (¹H-NMR). The adsorption efficiency of NSs was evaluated as function of different contact times. The results confirmed that the NSs have a favourable sorption capacity for the chosen guest, as the polymers exhibited a maximum adsorption of 4.53 × 10⁻³ mmol/g for DTF. We also found that magnetic NSs show good reusability as they maintain their efficiency after eight adsorption and desorption cycles. Our studies and characterization by means of SEM, TEM, EDS, vibrating sample magnetometer (VSM) and UV-VIS also show that NSs with magnetic properties are excellent tools for insecticide removal from aqueous environments.

Removal of Chromium from Synthetic Wastewater Using Modified Maghemite Nanoparticles

The main aim of this study was to ascertain the removal of chromium ions from synthetic wastewater using modified maghemite nanoparticles (MNPs). Commercially available maghemite nanoparticles (NPs) (< 50 nm) were modified using sodium dodecyl sulfate (SDS). The MNPs were characterized using a powder X-ray diffractometer (XRD) and Fourier transform infrared spectrophotometer (FTIR). Statistically designed batch experiments were carried out to evaluate the effects of various parameters, namely the pH of the solution, initial chromium concentration, and adsorbent dose, on the chromium removal efficiency (RE). The results from this study showed that the adsorbent dose had a synergistic effect on chromium RE, while pH and initial chromium concentration had antagonistic effects on the RE. An optimal chromium RE of 95.8% was obtained at pH = 2.6, adsorbent dose = 5 g/L, and initial chromium concentration = 20 mg/L. The analysis of variance (ANOVA) results showed that the model was significant, with high F value (F = 80.07) and low P value (P = < 0.001). Based on the results obtained from the experiments, the MNPs could be exploited as an efficient adsorbent for chromium removal from wastewater.

Coupling of kenaf Biochar and Magnetic BiFeO3 onto Cross-linked Chitosan for Enhancing Separation Performance and Cr(VI) Ions Removal Efficiency

Cr(VI) contamination has posed great threat to both the ecosystem and human health for its carcinogenic and mutagenic nature. A highly effective adsorbent for the removal of Cr(VI) was prepared and its adsorption mechanism was thoroughly discussed in this study. In detail, magnetic BiFeO₃ and kenaf biochar were loaded on cross-linked chitosan to obtain chitosan-kenaf biochar@BiFeO₃ (CKB) for improving adsorption capacity towards Cr(VI). The adsorption process of Cr(VI) onto CKB was evaluated as a function of the pH, the existence of competing ions, the initial concentration of Cr(VI) and contact time. The results show that CKB exhibits the highest adsorption capacity under the optimal pH 2.0. The presence of competing ions such as Ca²⁺, NO₃⁻, SO₄²⁻, and Cl⁻ decreases the adsorption capacity; among them, Ca²⁺ and NO₃⁻ show the greatest hindrance. By studying the effect of initial Cr(VI) concentration on the adsorption capacity, it was found that CKB in the solution was enough to remove Cr(VI) for all treatments (10–200 mg/L). The adsorption experimental data were well fitted with pseudo-first-order model, suggesting that chemisorption is not the dominant rate-limiting step. Freundlich isotherm model can better explain the adsorption process, indicating a non-ideal adsorption towards Cr(VI) on a heterogeneous surface of CKB. A 2^5-1 Fractional Factorial Design (FFD) showed that pH and initial concentration of Cr(VI) have significant influence on Cr(VI) adsorption in our reaction system. In general, excellent adsorption efficiency of CKB indicates that it may be a good candidate for the remediation of Cr(VI)-contaminating wastewater.