Environmental and health impacts due to e-waste disposal in China - A review

Space-use strategy drives fine-scale spatial variation of chlorinated paraffins in indo-pacific humpback dolphins

Contaminant accumulation in organisms can be influenced by both biological traits and environmental conditions. However, delineating the main factors affecting contaminant burdens in organisms remains challenging. Here, we conducted an initial investigation into the impact of diet and habitat on the accumulation of short- (SCCPs) and medium-chain chlorinated paraffins (MCCPs) in Indo-Pacific humpback dolphins (2003-2020, n = 128) from the Pearl River Estuary (PRE), a highly polluted estuary in China. The detected levels of SCCPs (5897 ± 3480 ng g-1 lw) and MCCPs (13,960 ± 8285 ng g-1 lw) in blubber samples of humpback dolphin are the highest among recorded values marine mammals. Both SCCPs and MCCPs exhibited biomagnification factor values exceeding 1, suggesting their biomagnification potential within the dolphins and their diet. Quantitative diet analysis using the dolphin fatty acid signatures revealed that humpback dolphins inhabiting the western PRE consumed a larger proportion of carnivorous fish than those from the eastern PRE. However, spatial analysis showed that humpback dolphins in the western PRE contained lower SCCP/MCCP concentrations than those from the eastern PRE. Based on these findings we suggest that, compared to diet differences, spatial variations of SCCPs/MCCPs in humpback dolphins may be predominantly influenced by their space-use strategies, as the eastern PRE is closer to the pollutant discharge source and transfer routes.

Biomarker responses in Danio rerio following an acute exposure (96 h) to e-waste leachate

Electronic waste (e-waste) has been identified as an emerging pollutant and is the fastest growing waste stream at the present time. Significant technological development and modernization within the last decade has led to the rapid accumulation of outdated, broken and unwanted electrical and electronic equipment (EEE). Electronic products mainly consist of a range of metal containing components that, when disposed of improperly, could result in metal constituents leached into the environment and posing a health risk to humans and animals alike. Metal exposure can induce oxidative stress in organisms, which could lead to synergistic, antagonistic and additive effects. The metals found highest in abundance in the simulated e-waste leachate, were nickel (Ni), barium (Ba), zinc (Zn), lithium (Li), iron (Fe), aluminium (Al) and copper (Cu). An acute exposure study was conducted over a 96 h period to determine the potential toxicity of e-waste on the test organism Danio rerio. Biomarker analysis results to assess the biochemical and physiological effects induced by e-waste leachate, showed a statistically significant effect induced on acetylcholinesterase activity, superoxide dismutase, catalase activity, reduced glutathione content, glutathione s-transferase, malondialdehyde and glucose energy available. The Integrated Biomarker Response (IBRv2) analysis revealed a greater biomarker response induced as the exposure concentration of e-waste leachate increased.

Enzymatic Mesoporous Metal Nanocavities for Concurrent Electrocatalysis of Nitrate to Ammonia Coupled with Polyethylene Terephthalate Upcycling

Electrochemical upcycling of waste pollutants into high value-added fuels and/or chemicals is recognized as a green and sustainable solution that can address the resource utilization on earth. Despite great efforts, their progress has seriously been hindered by the lack of high-performance electrocatalysts. In this work, bimetallic PdCu mesoporous nanocavities (MCs) are reported as a new bifunctional enzymatic electrocatalyst that realizes concurrent electrocatalytic upcycling of nitrate wastewater and polyethylene terephthalate (PET) plastic waste. Abundant metal mesopores and open nanocavities of PdCu MCs provide the enzymatic confinement of key intermediates for the deeper electroreduction of nitrate and accelerate the transport of reactants/products within/out of electrocatalyst, thus affording high ammonia Faradic efficiency (FENH3) of 96.6% and yield rate of 5.6 mg h-1 mg-1 at the cathode. Meanwhile, PdCu MC nanozymes trigger the selective electrooxidation of PET-derived ethylene glycol (EG) into glycolic acid (GA) and formic acid with high FEs of >90% by a facile regulation of potentials at the anode. Moreover, concurrent electrosynthesis of value-added NH3 and GA is disclosed in the two-electrode coupling system, further confirming the high efficiency of bifunctional PdCu MC nanozymes in producing value-added fuels and chemicals from waste pollutants in a sustainable manner.

Physicochemical reactions in e-waste recycling

Electronic waste (e-waste) recycling is becoming a global concern owing to its immense quantity, hazardous character and the potential loss of valuable metals. The many processes involved in e-waste recycling stem from a mixture of physicochemical reactions, and understanding the principles of these reactions can lead to more efficient recycling methods. In this Review, we discuss the principles behind photochemistry, thermochemistry, mechanochemistry, electrochemistry and sonochemistry for metal recovery, polymer decomposition and pollutant elimination from e-waste. We also discuss how these processes induce or improve reaction rates, selectivity and controllability of e-waste recycling based on thermodynamics and kinetics, free radicals, chemical bond energy, electrical potential regulation and more. Lastly, key factors, limitations and suggestions for improvements of these physicochemical reactions for e-waste recycling are highlighted, wherein we also indicate possible research directions for the future.

Can e-waste recycling provide a solution to the scarcity of rare earth metals? An overview of e-waste recycling methods

Recycling e-waste is seen as a sustainable alternative to compensate for the limited natural rare earth elements (REEs) resources and the difficulty of accessing these resources. Recycling facilitates the recovery of valuable products and minimizes emissions during their transportation. Numerous studies have been reported on e-waste recycling using various techniques, including thermo-, hydro- and biometallurgical approaches. However, each approach still has technical, economic, social, or environmental limitations. This review highlights the potential of recycling e-waste, including outlining the current unutilized potential of REE recycling from different e-waste components. An in-depth analysis of e-waste generation on a global scale and Australian scenario, along with various hazardous impacts on ecosystem and human health, is reported. In addition, a comprehensive summary of various metal recovery processes and their merits and demerits is also presented. Lifecycle analysis for recovering REEs from e-waste indicate a positive environmental impact when compared to REEs produced from virgin sources. In addition, recovering REEs form secondary sources eliminated ca. 1.5 times radioactive waste, as seen in production from primary sources scenario. The review outcome demonstrates the increasing potential of REE recycling to overcome critical challenges, including issues over supply security and localized dependency.

Chitosan-based foam composites for hexavalent chromium remediation: Effect of microcellulose and crosslinking agent content

Potentially toxic metal ions, such as hexavalent chromium (Cr6+), present in water concern the population's health due to their persistence, bioaccumulation potential, and high toxicity. Highly porous materials based on polysaccharides are promising technologies for metal removal due to their high surface area, biodegradability, and low toxicity. This study evaluated the effect of concentrations of microcellulose (0.5, 1, and 1.5 %) and glutaraldehyde (1, 2, and 3 %) in the adsorption capacity and mechanical properties of chitosan foams. The developed foams exhibited a three-dimensional structure with interconnected pores. Compared to foams without microcellulose, adding 1.5 % microcellulose increased up to 180 % in maximum stress supported by the foams and up to 135 % in Young's modulus. However, Cr6+ sorption capacity decreased with increasing microcellulose and crosslinking agent content due to the occupation of amino groups. Still, the foams exhibited a highly favorable sorption behavior, and the Sips isotherm model provided the best fit to the experimental data. The maximum sorption capacity reached approximately 1.4 mmol·g-1 at pH 4.0 and 25 °C. The foam structural integrity, enhanced mechanical properties, and efficient sorption capacity make them viable alternatives for environmentally friendly and cost-effective treatment of water contaminated with Cr6+ ions.

Quantitative identification of the co-exposure effects of e-waste pollutants on human oxidative stress by explainable machine learning

Global electronic waste (e-waste) generation continues to grow. The various pollutants released during precarious e-waste disposal activities can contribute to human oxidative stress. This study encompassed 129 individuals residing near e-waste dismantling sites in China, with elevated urinary concentrations of e-waste-related pollutants including heavy metals, polycyclic aromatic hydrocarbons (PAHs), organophosphorus flame retardants (OPFRs), bisphenols (BPs), and phthalate esters (PAEs). Utilizing an explainable machine learning framework, the study quantified the co-exposure effects of these pollutants, finding that approximately 23% and 18% of the variance in oxidative DNA damage and lipid peroxidation, respectively, was attributable to these substances. Heavy metals emerged as the most critical factor in inducing oxidative stress, followed by PAHs and PAEs for oxidative DNA damage, and BPs, OPFRs, and PAEs for lipid peroxidation. The interactions between different pollutant classes were found to be weak, attributable to their disparate biological pathways. In contrast, the interactions among congeneric pollutants were strong, stemming from their shared pathways and resultant synergistic or additive effects on oxidative stress. An intelligent analysis system for e-waste pollutants was also developed, which enables more efficient processing of large-scale and dynamic datasets in evolving environments. This study offered an enticing peek into the intricacies of co-exposure effect of e-waste pollutants.

A machine learning approach for predicting and localizing the failure and damage point in sewer networks due to pipe properties

As a basic infrastructure, sewers play an important role in the innards of every city and town to remove unsanitary water from all kinds of livable and functional spaces. Sewer pipe failures (SPFs) are unwanted and unsafe in many ways, as the disturbance that they cause is undeniable. Sewer pipes meet manholes frequently, unlike water distribution systems, as in sewers, water movement is due to gravity and manholes are needed in every intersection as well as through pipe length. Many studies have been focused on sewer pipe failures and so on, but few investigations have been done to show the effect of manhole proximity on pipe failure. Predicting and localizing the sewer pipe failures is affected by different parameters of sewer pipe properties, such as material, age, slope, and depth of the sewer pipes. This study investigates the applicability of a support vector machine (SVM), a supervised machine learning (ML) algorithm, for the development of a prediction model to predict sewer pipe failures and the effects of manhole proximity. The results show that SVM with an accuracy of 84% can properly approximate the manhole effects on sewer pipe failures.

Mobility, speciation of cadmium, and bacterial community composition along soil depths during microbial carbonate precipitation under simulated acid rain

An overexploitation of earth resources results in acid deposition in soil, which adversely impacts soil ecosystems and biodiversity and affects conventional heavy metal remediation using immobilization. A series of column experiments was conducted in this study to compare the cadmium (Cd) retention stability through biotic and abiotic carbonate precipitation impacted by simulated acid rain (SAR), to build a comprehensive understanding of cadmium speciation and distribution along soil depth and to elucidate the biogeochemical bacteria-soil-heavy metal interfaces. The strain of Sporosarcina pasteurii DSM 33 was used to trigger the biotic carbonate precipitation and cultivated throughout the 60-day column incubation. Results of soil pH, electrical conductivity (EC), and quantitative CdCO3/CaCO3 analysis concluded that the combination of biotic and abiotic soil treatment could reinforce soil buffering capacity as a strong defense mechanism against acid rain disturbance. Up to 1.8 ± 0.04 U/mg urease enzyme activity was observed in combination soil from day 10, confirming the sustained effect of urease-mediated microbial carbonate precipitation. Cadmium speciation and distribution analyses provided new insights into the dual stimulation of carbonate-bound and Fe/Mn-bound phases of cadmium immobilization under microbially induced carbonate precipitation (MICP). As confirmed by the microbial community analysis, outsourcing urea triggered diverse microbial metabolic responses, notably carbonate precipitation and dissimilatory iron metabolism, in both oxygen-rich topsoil and oxygen-depleted subsurface layers. The overall investigation suggests the feasibility of applying MICP for soil Cd remediation under harsh environments and stratagem by selecting microbial functionality to overcome environmental challenges.

Associations between inhalation of typical volatile and semi-volatile organic compounds in e-waste dismantling workers with liver function damage

Studies in cell culture and animal models suggest hepatotoxicity of some volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs), however, their effects in human populations under real exposure conditions have never been clarified. In this cross-sectional study, 224 participants, 38 e-waste dismantling workers and 186 subjects residing near to the dismantling sites in southern China, were evaluated for personal inhalational exposure to 72 VOCs and 91 SVOCs according to site-specific atmospheric chemical concentrations and personal exposure time. Additionally, their serum samples were subjected to liver function tests (LFTs), including total protein (TP), albumin (ALB), globulin (GLB), aspartate aminotransferase (AST), alanine aminotransferase (ALT), gamma-glutamyl transpeptidase (GGT), and bilirubin. Linear regression analysis of the VOC/SVOC levels against the LFTs results indicated that VOC exposure was negatively associated with the TP, ALB, GLB levels (indicating liver-specific protein synthesis functions), while positively associated with AST, ALT, GGT activities (marking liver damage). Somehow, SVOC exposure appeared to be positively associated with not only AST and ALT but also TP and ALB. These findings were supported by the quantile g-computation analysis and confirmed in the Bayesian kernel machine regression model. This study indicates that simultaneous inhalation of VOCs and SVOCs may impair human liver functions.

Multi-agent collaborative model of e-waste recycling

E-waste production is exploding as a result of rising demand for electronics and a faster rate of replacement. A crucial, yet unresolved issue is how to encourage cooperation among primary agents in the recycling of e-waste. To examine a multi-agent collaborative model of e-waste recycling among local governments, producers, and consumers, this research employs the techniques of evolutionary games and system dynamics. Evolutionary games are used to analyze the strategy choice results, while system dynamics are adopted to depict the decision-making processes. Overall, we find that rewards and penalties affect the stability and efficiency of the collaborative model of e-waste recycling and that the greater the correlation between the rewards-and-penalties mechanism and the strategies, the more stable the model is. Specifically, the results show that: (1) static rewards-and-penalties mechanism is likely to breed mutants and thus is not conducive to stable cooperation; (2) dynamic rewards-and-penalties mechanism can inhibit the instability of e-waste recycling model, but only 60% of producers are willing to build an e-waste recycling system; (3) dynamic rewards-and-penalties optimizing mechanism can ensure that producers and consumers wholeheartedly work for e-waste recycling consistently without local governments regulation; (4) according to the sensitivity analysis, increasing the amount of rewards and penalties can facilitate faster evolution of collaboration in the e-waste recycling system. Finally, this study makes implications for promoting efficiency and stability in e-waste recycling among local governments, producers, and consumers.

A review of heavy metal risks around e-waste sites and comparable municipal dumpsites in major African cities: Recommendations and future perspectives

In Africa, the effects of informal e-waste recycling on the environment are escalating. It is regularly transported from developed to developing nations, where it is disassembled informally in search of precious metals, thus increasing human exposure to harmful compounds. Africa has a serious problem with e-waste, as there are significant facilities in Ghana and Nigeria where imported e-waste is unsafely dismantled. however, because they are in high demand and less expensive than new ones, old electronic and electrical items are imported in large quantities, just like in many developing nations. After that, these objects are frequently scavenged to recover important metals through heating, burning, incubation in acids, and other techniques. Serious health hazards are associated with these activities for workers and individuals close to recycling plants. At e-waste sites in Africa, there have been documented instances of elevated concentrations of hazardous elements, persistent organic pollutants, and heavy metals in dust, soils, and vegetation, including plants consumed as food. Individuals who handle and dispose of e-waste are exposed to highly hazardous chemical substances. This paper examines heavy metal risks around e-waste sites and comparable municipal dumpsites in major African cities. Elevated concentrations of these heavy metals metal in downstream aquatic and marine habitats have resulted in additional environmental impacts. These effects have been associated with unfavourable outcomes in marine ecosystems, such as reduced fish stocks characterized by smaller sizes, increased susceptibility to illness, and decreased population densities. The evidence from the examined studies shows how much e-waste affects human health and the environment in Africa. Sub-Saharan African nations require a regulatory framework that includes specialized laws, facilities, and procedures for the safe recycling and disposal of e-waste.

Reversing the damage: ecological restoration of polluted water bodies affected by pollutants due to anthropogenic activities

Aquatic ecosystems provide a large number of cultural, regulating, and supporting services to humans and play a pivotal role in sustaining freshwater-dependent ecosystems. However, an increase in human population coupled with economic growth in the last few decades has severely affected their functioning and ecological health. This has led to an increase in concentrations of pollutants originating from anthropogenic activities such as heavy metals, plastics, semi-volatile organic compounds, and endocrine disruptors. These pollutants provoke deleterious impacts on aquatic biodiversity and affect the water quality and functioning. In this paper, we discuss the sources and impacts of such pollutants as well as restoration techniques for reducing their impact on aquatic ecosystems. Several physical and chemical ecological restoration techniques, such as dredging, sediment capping, water diversion, adsorption, aeration, and flushing, can be employed to improve the water quality of water bodies. Additionally, biological techniques such as phytoremediation, phycoremediation, the use of biomembranes, and the construction of ecological floating beds can be employed to increase the population of aquatic organisms and improve the overall ecological health of aquatic ecosystems. Restoration techniques can effectively reduce the concentrations of suspended solids and dissolved phosphorus and increase the levels of dissolved oxygen. The restoration techniques for improving the ecological health of water bodies should not be limited to simply improving the water quality but should also focus on improving the biological processes and ecosystem functioning since it is essential to mitigate the adverse effects of pollutants and restore the vital ecosystem services provided by water bodies for future generations.

Recycling of the waste battery: Effect of waste battery on property of asphalt and environmental impact evaluation

A waste battery is a kind of hazardous solid waste, and traditional recycling methods can cause serious environmental pollution. In this paper, a pilot study was conducted to reduce the leaching of heavy metals in waste battery power (WBP) by using the wrapping effect of asphalt and explored the feasibility of adding waste battery as a modifier to asphalt. The main components of WBP are determined through microscopic experiments, and its compatibility with asphalt and microscopic mechanism are analyzed; The influence of WBP on asphalt properties are analyzed through routine tests and mixture tests; The leaching test of toxicity is used to analyze the impact of WBP and WBP modified asphalt on the environment. The experimental results indicate that WBP is mainly composed of MnO2, C, and ZnO; There are many wrinkles and grooves on the surface of WBP, which can effectively adsorb asphalt during the modification process, produce anchoring effect, and have good compatibility with asphalt; The components of waste battery adsorb the aging light components in asphalt through their folds and swelling, so that the proportion of heavy components is relatively increased, improving the property indicators of asphalt; From the perspective of engineering property, WBP modified asphalt mixture has strong resistance to deformation and water damage. The leaching concentration of heavy metal ions from bare WBP in soil seriously exceeded the standard. In contrast, when WBP was added to asphalt, the cumulative leaching concentration of heavy metal ions was significantly reduced due to the wrapping effect of asphalt, and the WBP leaching toxicity was greatly suppressed; The method of recycling waste battery and adding it to asphalt as a modifier can prevent the release of heavy metal ions from waste battery into the environment and reduce the risk of the total environmental harm to soil, groundwater and human health.

Incorporating self-employed maintainers into WEEE formal recycling system: A system dynamic approach

The establishment and operation of a formal recycling system for waste electrical and electronic equipment is an important measure to reduce environmental hazards and improve the recycling of resources, but how to incorporate self-employed maintainers into the system has formed an important research gap. Based on the perspective of extended producer responsibility, we argue that self-employed maintainers are required to assume the corresponding environmental responsibility for the environmental externality caused by informal maintenance activities. Using qualitative structural analysis techniques of system dynamics approach with quantitative simulation analysis techniques, we construct an incentive model for self-employed maintainers' participation in formal recycling system, based on which we propose four incentive strategies. A simulation analysis is further conducted by using the case of waste mobile phones recycling in Qingdao to verify the effectiveness of our incentive model and strategies.

Organophosphate esters (OPEs) in a heavily polluted river in South China: Occurrence, spatiotemporal trends, sources, and phase distribution

In the past decade, organophosphate esters (OPEs) undergo rapid increase in production and use. Meanwhile, owing to their additive property, OPEs exhibit liability to escape from related products and therefore ubiquity in various environments. Moreover, numerous researches verify their bioavailability and negative effects on biota and human, hence their occurrence and associated risks have caught much concern, particularly those in aquatic systems. So far, however, OPEs in water are generally investigated as a whole, their phase distribution and behavior in waterbodies are incompletely characterized. We examined 25 OPEs in water (including dissolved and particulate phases), sediment, and sediment core samples from the Lian River, which flows through the Guiyu e-waste recycling zone and Shantou specific economic zone in South China. Compared to most global waterbodies, the Lian River showed high or ultrahigh OPE levels in both water and sediments, particularly in the reaches surrounded by e-waste recycling and plastic-related industries, which were the top two greatest OPE sources. Non-industrial and agriculture-related anthropogenic activities also contributed OPEs. Sediment core data suggested that OPEs have been present in waters in Guiyu since the 1960s and showed a temporal trend consistent with the local waste-recycling business. The phase distribution of OPEs in the Lian River was significantly correlated with their hydrophobicity and solubility. Owing to their wide range of physicochemical properties, OPE congeners showed significant percentage differences in the Lian River water and sediments. Generally, OPEs in water reflect their dynamic real-time inputs, while those in sediment signify their accumulative deposition, which is another cause of their phase distribution disparities in the Lian River. The physicochemical parameters of OPEs first imposed negative and then positive influences on their dissolved phase-sediment distribution, indicating the involvement of both the adsorption of dissolved OPEs and the deposition of particle-bound OPEs.

Deca-BDE emissions, validation, and environmental fate in China

Decabromodiphenyl ether (Deca-BDE) was officially listed in Annex A of the Stockholm Convention for persistent organic pollutants (POPs). It is necessary to establish its emission inventory to help reduce Deca-BDE contamination in the environment. We established a comprehensive Deca-BDE emission inventory in China. The results reveal that, from 2015 to 2017, the Deca-BDE emissions in its production source (source I) were less altered but increased annually in flame retarded plastics processing (source II), Deca-BDE-containing products usage (source III), and electronic waste (e-waste) treatment (source IV). We show that Deca-BDE emissions declined significantly in sources I and II but grew in source III and source IV from 2017 to 2018. We set up the provincial emission inventory to a gridded map on a spatial resolution of 0.25°× 0.25° latitude/longitude. The gridded inventory was incorporated into ChnMETOP model to simulate Deca-BDE concentrations in air and soil, and the modeled concentrations were compared to field-sampling data. The results show that the Deca-BDE emission inventory developed in this study agreed well with observed data, demonstrating that the Deca-BDE inventory in China developed in the present study is reliable. The inventory provides a support for quantifying human exposure risk to Deca-BDE and developing effective mitigation measures to mitigate Deca-BDE emissions.

Optimal emission reductions pathway for polybrominated diphenyl ethers in typical household e-waste dismantling products

Waste printed circuit boards (WPCBs) and waste epoxy resin powder (WERP) generated after crushing are the most crucial hazardous materials in the recycling process of household e-waste. In this study, a sustainable treatment approach was established in response to the drawbacks of traditional treatment methods. The baseline and hypothetical scenarios were as follows: (1) scenario 1 (S1): WPCBs mechanical treatment, WERP safe landfill; (2) scenario 2 (S2): WPCBs mechanical treatment, WERP imitation stone bricks production. Based on the material flow analysis and comprehensive evaluation, the most profitable and environmentally friendly scenario was selected and assumed to be promoted in Jiangsu area and China from 2013 to 2029. The analysis result showed that S2 had the best economic performance and polybrominated diphenyl ethers (PBDEs) emission reductions potential. S2 is the best option that can gradually replace the traditional recycling model. With the promotion of S2, China would reduce the emissions of PBDEs by 700.8 kg. Meanwhile, it could save $542.2 million in WERP landfill costs, produce 1260.2 kt of imitation stone bricks, and generate $2308.5 million in economic benefits. In conclusion, this study can offer a new idea for dismantling products treatment of household e-waste and provide scientific knowledge to improve the sustainable management.

Co-occurrence and distribution of organophosphate tri- and di-esters in dust and hand wipes from an e-waste dismantling plant in central China

Electronic waste (e-waste) dismantling facilities are a well-known source of emerging contaminants including organophosphate esters (OPEs). However, little information is available regarding the release characteristics and co-contaminations of tri- and di-esters. This study, therefore, investigated a broad range of tri- and di-OPEs in dust and hand wipe samples collected from an e-waste dismantling plant and homes as comparison. The median ∑tri-OPE and ∑di-OPE levels in dust and hand wipe samples were approximately 7- and 2-fold higher than those in the comparison group, respectively (p < 0.01). Triphenyl phosphate (median: 11,700 ng/g and 4640 ng/m²) and bis(2-ethylhexyl) phosphate (median: 5130 ng/g and 940 ng/m²) were the dominant components of tri- and di-OPEs, respectively. The combination of Spearman rank correlations and the determinations of molar concentration ratios of di-OPEs to tri- OPEs revealed that apart from the degradation of tri-OPEs, di-OPEs could originate from direct commercial application, or as impurities in tri-OPE formulas. Significant positive correlations (p < 0.05) were found for most tri- and di-OPE levels between the dust and hand wipes from dismantling workers, whereas this was not observed in those from the ordinary microenvironment. Our results provide robust evidence that e-waste dismantling activities contribute to OPEs contamination in the surroundings and further human exposure pathways and toxicokinetics are needed to be elucidated.

Towards a sustainable and green approach of electrical and electronic waste management in Rwanda: a critical review

Electric and electronic equipment (EEE) consumption has grown to worrisome proportions in developing countries (DC_S), resulting in massive amounts of electrical and electronic waste (e-waste) being produced. A diagnosis of e-waste proliferation is required for its sustainable management plan in Rwanda. This review is based on open-access papers with e-waste as a keyword, the present situation of EEE, and e-waste in Rwanda. The need for various information communication and technology (ICT) tools, such as end-user devices, cooling-system devices, network equipment, and telecommunication devices, is strongly encouraged by Rwandan national plans, which deem ICT as a vital enabler of knowledge-based economy and development. In 2014, EEE was 33,449 tonnes (t), which is expected to be 267,741 t in 2050, with a yearly increase rate of 5.95%. In this regard, out-of-date EEE is being dumped as e-waste in large quantities and at an increasing rate across Rwanda. E-waste is often disposed of in uncontrolled landfills together with other types of household waste. To address this rising threat, as well as to preserve the environment and human health, proper e-waste management involving e-waste sorting/separation from other waste streams, repairs, reuse, recycling, remanufacturing, and disposal has been proposed.

Geochemical distribution and environmental risk assessment of trace metals in groundwater released from e-waste management activities in Lahore, Pakistan

Non-sustainable e-waste recycling and dumping activities release trace metals into the ambient environment where they may threaten the biological communities and human health. A total of 45 groundwater and 21 leachate samples were collected from seven recycling, seven dumping, and one reference site in Lahore, Pakistan, and analyzed for Cu, Pb, Zn, Cd, Mn, and Fe in atomic absorption spectrophotometer. Comparing the results with the World Health Organization (WHO) standards of drinking water, only the concentrations of Cu, Zn, Mn, and Fe at all sites were found to be within the permissible limits, i.e., 2, 3, 0.5, and 1 mg/L, respectively. In leachates, only Cd and Mn at one site (0.204 and 8.636 mg/L, respectively) exceeded the allowable limits of National Environmental Quality Standards of Municipal and Liquid industrial effluents. Geo-accumulation index, contamination factor, contamination degree, and pollution load index values showed no to moderate contamination. The ecological risk index did not exceed 150, depicting low risk to nearby biological communities. The non-carcinogenic health risk assessment showed a hazard index value greater than 1 at all sites for children (2.04) and adults (1.52), with Pb being the major contributor to adverse health impacts via ingestion and dermal route. Children (1.21 × 10^-4) were at a more significant threat of carcinogenic risk from Pb and Cd as compared to adults (8.10 × 10^-5). Therefore, there is a dire need to introduce sustainable e-waste recycling and managing techniques to reduce further groundwater contamination via the percolation of trace metals and to reduce the current contamination level.

Emission inventories, emission factors, and composition profiles of volatile organic compounds (VOCs) and heavy metals (HMs) from an electronic waste dismantling park in southern China

Electronic waste (e-waste) dismantling is a significant source of atmospheric pollutants, including volatile organic compounds (VOCs) and heavy metals (HMs), which may have adverse effects on the surrounding environment and residents. However, the organized emission inventories and emission characteristics of VOCs and HMs from e-waste dismantling are not well documented. In this study, the concentrations and components of VOCs and HMs were monitored at the exhaust gas treatment facility from two process areas of a typical e-waste dismantling park in southern China in 2021. Emission inventories of VOCs and HMs were established, with total emissions of 8.85 t/a and 18.3 kg/a for VOCs and HMs in this park, respectively. The cutting & crushing (CC) area was the largest emissions source, accounting for 82.6% of VOCs and 79.9% of HMs, respectively, while the baking plate (BP) area had higher emission factors. Additionally, the concentration and composition of VOCs and HMs in the park were also analyzed. For VOCs, the concentrations of halogenated hydrocarbons and aromatic hydrocarbons were comparable in the park, while m/p-xylene, o-xylene, and chlorobenzene were the key VOC species. The HM concentrations followed the order of Pb > Cu > Mn > Ni > As > Cd > Hg, with Pb and Cu being the main heavy metals released. This is the first VOC and HM emission inventory for the e-waste dismantling park, and our data will lay a solid ground for pollution control and management for the e-waste dismantling industry.

Estimation of indoor soil/dust-skin adherence factors and health risks for adults and children in two typical cities in southern China

Soil/dust (SD) skin adherence is key dermal exposure parameter used for calculating the health risk of dermal exposure to contaminants. However, few studies of this parameter have been conducted in Chinese populations. In this study, forearm SD samples were randomly collected using the wipe method from population in two typical cities in southern China as well as office staff in a fixed indoor environment. SD samples from the corresponding areas were also sampled. The wipes and SD were analyzed for tracer elements (aluminum, barium, manganese, titanium, and vanadium). The SD-skin adherence factors were 14.31 μg/cm² for adults in Changzhou, 7.25 μg/cm² for adults in Shantou, and 9.37 μg/cm² for children in Shantou, respectively. Further, the recommended values for indoor SD-skin adherence factors for adults and children in Southern China were calculated to be 11.50 μg/cm² and 9.37 μg/cm², respectively, which were lower than the U.S. Environmental Protection Agency (USEPA) recommended values. And the SD-skin adherence factor value for the office staff was small (1.79 μg/cm²), but the data were more stable. In addition, PBDEs and PCBs in dust samples from industrial and residential area in Shantou were also determined, and health risks were assessed using the dermal exposure parameters measured in this study. None of the organic pollutants posed a health risk to adults and children via dermal contact. These studies emphasized the importance of localized dermal exposure parameters, and further studies should be conducted in the future.

Ecotoxicological effects of soil lithium on earthworm Eisenia fetida: Lethality, bioaccumulation, biomarker responses, and histopathological changes

Lithium is an emerging environmental contaminant in the current low-carbon economy, but little is known about its influences on soil invertebrates. In this work, earthworm Eisenia fetida was exposed to soils treated with different levels of lithium for 7 d, and multiple ecotoxicological parameters were evaluated. The results showed that mortality was dose-dependent and lithium's median lethal content (LC₅₀) to earthworm was respectively 865.08, 361.01, 139.36, and 94.95 mg/kg after 1 d, 2 d, 4 d, and 7 d exposure. The bioaccumulation factor based on measured exogenous lithium content (BF_exog) respectively reached 0.79, 1.01, 1.57, and 1.27 with the increasing lithium levels, suggesting that lithium accumulation was averagely 1.16-fold to the exogenous content, and 74.42%∼81.19%, 14.54%∼18.23%, and 2.26%∼8.02% of the lithium in exposed earthworms were respectively retained in the cytosol, debris, and granule. Then, lithium stress stimulated the activity of superoxide dismutase, peroxidase, catalase, acetylcholinesterase, and glutathione S-transferase as well as the content of 8-hydroxy-2-deoxyguanosine and metallothionein, indicating the generation of oxidative damage, while the content of reactive oxygen species and malondialdehyde decreased. Finally, lithium introduced histopathological changes, including the degenerated seminal vesicle and muscle hyperplasia, as well as high or extreme nuclear DNA damage. This study confirmed the obvious bioaccumulation and toxic effects caused by soil lithium via ecotoxicological data, providing new theoretical insights into understanding the ecological risks of lithium to soil invertebrates.

Integration of electronic waste management: a review of current global generation, health impact, and technologies for value recovery and its pertinent management technique

The fast evolution of waste electrical and electronic equipment (WEEE) has developed into a prime environmental perturb in recent days. Today, electrical and electronic products merely become a needed part of people life's and professional lives. The whole process of e-waste contains an organized collection system, appropriate dismantling, and its treatment of recycling. The unparalleled hastening of e-waste and unceremonious discarding lead to an adverse impact on a country's development. Currently, challenges in e-waste have a lack of practical aid, poor structure, and insufficient economic support. Several legislations have been imposed which aim to enhance the handling of e-waste. Operative management of e-waste is now essential for the protective atmosphere and human beings as well. This article provides the systemic flow of the e-waste definition, global information, and generation of e-waste and composition of e-waste which were discussed. The study categorized the hazardous effect of e-waste on human beings, and the content analysis of e-waste in recent LCA applications was highlighted. Further different metal extraction and recovery techniques from e-waste have been reviewed. A few sets of current practices and some recommendations on a global scale level were provided. Finally, based on analysis, some approaches to e-waste was accomplished, and equitable environmental management was taken into account to identify the future outlook areas.

Groundwater Quality and Health: Making the Invisible Visible

Linking groundwater quality to health will make the invisible groundwater visible, but there are knowledge gaps to understand the linkage which requires cross-disciplinary convergent research. The substances in groundwater that are critical to health can be classified into five types according to the sources and characteristics: geogenic substances, biogenic elements, anthropogenic contaminants, emerging contaminants, and pathogens. The most intriguing questions are related to quantitative assessment of human health and ecological risks of exposure to the critical substances via natural or induced artificial groundwater discharge: What is the list of critical substances released from discharging groundwater, and what are the pathways of the receptors' exposure to the critical substances? How to quantify the flux of critical substances during groundwater discharge? What procedures can we follow to assess human health and ecological risks of groundwater discharge? Answering these questions is fundamental for humans to deal with the challenges of water security and health risks related to groundwater quality. This perspective provides recent progresses, knowledge gaps, and future trends in understanding the linkage between groundwater quality and health.

Concepts of circular economy for sustainable management of electronic wastes: challenges and management options

The electronic and electrical industrial sector is exponentially growing throughout the globe, and sometimes, these wastes are being disposed of and discarded with a faster rate in comparison to the past era due to technology advancements. As the application of electronic devices is increasing due to the digitalization of the world (IT sector, medical, domestic, etc.), a heap of discarded e-waste is also being generated. Per-capita e-waste generation is very high in developed countries as compared to developing countries. Expansion of the global population and advancement of technologies are mainly responsible to increase the e-waste volume in our surroundings. E-waste is responsible for environmental threats as it may contain dangerous and toxic substances like metals which may have harmful effects on the biodiversity and environment. Furthermore, the life span and types of e-waste determine their harmful effects on nature, and unscientific practices of their disposal may elevate the level of threats as observed in most developing countries like India, Nigeria, Pakistan, and China. In the present review paper, many possible approaches have been discussed for effective e-waste management, such as recycling, recovery of precious metals, adopting the concepts of circular economy, formulating relevant policies, and use of advance computational techniques. On the other hand, it may also provide potential secondary resources valuable/critical materials whose primary sources are at significant supply risk. Furthermore, the use of machine learning approaches can also be useful in the monitoring and treatment/processing of e-wastes. HIGHLIGHTS: In 2019, ~ 53.6 million tons of e-wastes generated worldwide. Discarded e-wastes may be hazardous in nature due to presence of heavy metal compositions. Precious metals like gold, silver, and copper can also be procured from e-wastes. Advance tools like artificial intelligence/machine learning can be useful in the management of e-wastes.

Co-exposure levels of volatile organic compounds and metals/metalloids in children: Implications for E-waste recycling activity prediction

Identifying informal e-waste recycling activity is crucial for preventing health hazards caused by e-waste pollution. This study attempted to build a prediction model for e-waste recycling activity based on the differential exposure biomarkers of the populations between the e-waste recycling area (ER) and non-ER. This study recruited children in ER and non-ER and conducted a quasi-experiment among the adult investigators to screen differential exposure or effect biomarkers by measuring urinary 25 volatile organic compound (VOC) metabolites, 18 metals/metalloids, and 8-hydroxy-2'-deoxyguanosine (8-OHdG). Compared with children of the non-ER, the ER children had higher metal/metalloid (e.g., manganese [Mn], lead [Pb], antimony [Sb], tin [Sn], and copper [Cu]) and VOC exposure (e.g., carbon-disulfide, acrolein, and 1-bromopropane) levels, oxidative DNA damage, and non-carcinogenic risks. Individually added 8-OHdG, VOC metabolites, and metals/metalloids to the support vector machine (SVM) classifier could obtain similar classification effects, with the area under curve (AUC) ranging from 0.741 to 0.819. The combined inclusion of 8-OHdG and differential VOC metabolites, metals/metalloids, and mixed indexes (e.g., product items or ratios of different metals/metalloids) in the SVM classifier showed the highest performance in predicting e-waste recycling activity, with an AUC of 0.914 and prediction accuracy of 83.3 %. "Sb × Mn", followed by "Sn × Pb/Cu", "Sb × Mn/Cu", and "Sn × Pb", were the top four important features in the models. Compared with non-ER children, the levels of urinary Mn, Pb, Sb, Sn, and Cu in ER children were 1.2 to 2.4 times higher, while the levels of "Sb × Mn", "Sn × Pb/Cu", "Sb × Mn/Cu", and "Sn × Pb" were 3.5 to 4.7 times higher, suggesting that these mixed indexes could amplify the differences between e-waste exposed and non-e-waste exposed populations. With the continued inclusion of new biomarkers of e-waste pollution in the future, our prediction model is promising for screening informal e-waste recycling sites.

A review on recovery processes of metals from E-waste: A green perspective

E-waste management has become a global concern because of the enormous rise in the rate of end-of-life electrical and electronic equipment's (EEEs). Disposal of waste EEE directly into the environment leads to adverse effects on the environment as well as on human health. For the management of E-waste, numerous studies have been carried out for extracting metals (base, precious, and rare earth) following pyrometallurgy, hydrometallurgy, and biometallurgy. Irrespective of the advantages of these processes, certain limitations still exist with each of these options in terms of their adoption as treatment techniques. Several journal publications regarding the different processes have been made which aids in future research in the field of E-waste management. This review provides a comprehensive summary of the various metal recovery processes (pyrometallurgy, hydrometallurgy, and biometallurgy) from E-waste, along with their advantages and limitations. A bibliometric study based on the published articles using different keywords in Scopus has been provided for a complete idea about E-waste with green technology perspective like bioleaching, biosorption, etc. The present study also focussed on the circular economic approach towards sustainable E-waste management along with its socio-economic aspects and the economic growth of the country. The present study would provide valuable knowledge in understanding E-waste and its different treatment processes to the students, researchers, industrialists, and policymakers of the country.

Influences of lithium on soil properties and enzyme activities

Lithium is an emerging environmental contaminant under the current sustainable energy strategy, but little is known about its contamination characteristic in soil. In this study, soil properties and enzyme activities in soils treated with 10-1280 mg kg^-1 lithium were measured. The results showed that the content of ammonium nitrogen, total nitrogen, and exchangeable potassium significantly increased by 64.39%-217.73%, 23.06%-131.86%, and 4.76%-16.10%, while electric conductivity and available phosphorus content in lithium treated soils was respectively as 1.10-fold-13.44-fold and 1.27-fold-6.66-fold comparing to CK value. Soil pH and cation exchange capacity slightly declined and increased, respectively, and there was no significant variation in total organic carbon. However, nitrate nitrogen and sulfate content significantly decreased under higher lithium stress. On the other hand, lower lithium treatment level of 10, 20, 40, or 80 mg kg^-1 selectively promoted the activities of sucrase, urease, aryl sulfatase, and peroxidase, while the protease, neutral phosphatase, phytase, and lipase were significantly inhibited under all lithium levels, indicating a weaken geochemical cycling of carbon, nitrogen, phosphorus, and sulfur. Then, lithium's 10% and 50% ecological dose (ED10 and ED50) was respectively fitted as 21.18 and 1408.67 mg kg^-1 basing on Geometric Mean Index. The influences of lithium on soil were adverse. This study provided important insights into understanding the characteristics of lithium contamination, informing risk assessment and guiding remediation.

Presence of novel and legacy flame retardants and other pollutants in an e-waste site in China and associated risks

Electrical and Electronic Equipment (EEE) residues and their management have been widely identified as potential sources of plasticizers and flame retardants to the environment, especially in non-formal e-waste facilities. This study evaluates the distribution, partitioning and environmental and human impact of organophosphate esters (OPEs), legacy polychlorinated biphenyls (PCBs), polybromodiphenyl ethers (PBDEs) and organochlorine pesticides (OCPs) in the e-waste recycling area of Baihe Tang village, in the Qingyuan county, Guangdong province, China. A plastic debris lump accumulated in a small pond during years was identified as the main source of pollution with ∑pollutants of 8400 μg/g dw, being OPEs the main contaminants detected, followed by PBDEs. This lump produced the contamination of water, sediments, soils and hen eggs in the surrounding area at high concentrations. Plastic-water and water-sediment partitioning coefficients explained the migration of OPEs to the water body and accumulation in sediments, with a strong dependence according to the K_OW. Triphenyl phosphate (TPhP), tricresyl phosphate (TCPs) and high chlorination degree PCBs produced a risk in soils and sediments, considering the lowest predicted no effect concentration, while the presence of PCBs and PBDEs in free range hen eggs exceeded the acceptable daily intake. OCPs were detected at low concentrations in all samples. The presence of organic contaminants in e-waste facilities worldwide is discussed to highlight the need for a strict control of EEE management to minimize environmental and human risks.

Residues of polychlorinated biphenyls (PCBs) in a wild predatory fish from an e-waste site in South China between 2009 and 2016

Crude electronic waste (e-waste) recycling has been banned due to the serious environmental pollution it caused, leaving many abandoned e-waste sites. However, information on the current levels and associated ecological risks of e-waste-derived contaminants such as polychlorinated biphenyls (PCBs) in e-waste site is limited. Wild fish, because they can accumulate high pollutant levels, are suitable indicators for environmental pollution monitoring and has been widely employed as biomonitoring. In this study, we investigated the changes in the levels and profiles of PCBs in a wild fish species, the northern snakehead (Channa argus), before (2009) and after (2016) the ban of crude e-waste recycling from a typical e-waste recycling site in South China. The mean total PCB concentration in the northern snakehead sampled in 2016 (343 ng/g ww) declined by 75% compared with that (1410 ng/g ww) in 2009. The contributions of less chlorinated congeners (tri-CBs and tetra-CBs) in the northern snakehead tended to decrease over the years, indicating that the lighter congeners are more easily eliminated than the heavier ones in the environment. Our findings suggested no fresh PCB input in these years, as well as the positive impacts of laws and regulations on the prohibition of e-waste recycling. The ecological risk assessment suggested that PCB exposure may have median to high risks to the wild fish and fish-eating wildlife that inhabit the e-waste site, even after the ban of crude e-waste recycling activities.

Sustainable Behavior with Respect to Managing E-Wastes: Factors Influencing E-Waste Management among Young Consumers

With the proliferation of technological tools and the advancement in electronic devices and accessories, consumers across the world are changing and upgrading their electronic devices at an alarming rate. However, these developments have raised concerns related to electronic waste (E-waste). E-wastes contain toxic substances which may have a negative impact on both humans and the environment. This issue needs to be addressed by the research community, i.e., what would be the best way to get rid of existing devices? It is clear that countries need to work towards a more sustainable consumption pattern and consumers need to change their behaviour. The present study focuses on sustainable behaviour of consumers in terms of e-waste management. In this context, the study attempts to explore the factors influencing e-waste management among young consumers. In the present study, the Theory of Planned Behavior is extended by including the additional factors Government Policy, Environmental Concern, Financial Benefits and Awareness. A researcher-controlled sampling was employed to collect data from 524 respondents. Partial least square structural equation modelling (PLS-SEM) was used to validate the questionnaire constructs and confirm the relationships among the variables. The findings of the study suggest a significant role for government policy, financial benefits, environmental concerns, attitude, subjective norms, and perceived behavioural control in determining young consumers' behavioural intentions toward the management of e-waste. The study findings have implications for both researchers and marketing practitioners.

Functional Epoxy Elastomer Integrating Self-Healing Capability and Degradability for a Flexible Stretchable Strain Sensor

With the rapid development of flexible electronics and the increasing deterioration of the natural environment, functional and environmentally friendly flexible strain sensors have become one of the frontier research hotspots. Here, we propose a novel strategy to synthesize a functional epoxy elastomer integrating self-healing capability and degradability for flexible stretchable strain sensors. A carboxyl-terminated epoxy prepolymer was first synthesized using carboxyl-terminated PEG (PEG-COOH), 2,2'-dithiodibenzoic acid (DTSA), and 1,4-butanediol diglycidyl ether (BDDE), and then crosslinked by epoxidized soybean oil (ESO) to yield an epoxy elastomer. The obtained elastomer exhibited not only high tensile stress (5.07 MPa), large stretchability (477%), and high healing efficiency (92.5%) but also superior degradability in alkaline aqueous solution. The elastomer-based stretchable strain sensor with microstructure showed high sensitivity (GF = 176.71) and was successfully applied for detecting human motions and recognizing objects with various shapes. Moreover, the healed sensor could restore stable sensing ability. The prepared functional epoxy elastomer is of great significance for the preparation of environmentally friendly and high-performance sensors and is promising for applications in the fields of healthcare monitoring, intelligent robots, and wearable electronics.

Identifying contamination of heavy metals in soils of Peruvian Amazon plain: use of multivariate statistical techniques

The Peruvian Amazon plain has abundant natural resources and is home to great biodiversity, which makes it an area with high economic potential. However, the use of its resources through various activities has contributed to the release of heavy metals (HMs) into its soils, generating severe pollution problems which have mainly affected the health of local populations and their ecosystems. Currently, there are no comprehensive studies that have identified the specific sources of contamination by HMs in the soils of this part of the Peruvian territory. In this sense, this research aims to identify the possible sources of contamination by HMs in the soils of the Peruvian Amazon plain to focus efforts on the establishment of adequate measures for the protection of the health of people and the ecosystem. In the present study, samples of topsoils (0-20 cm depth) and subsoils (100-150 cm depth) were collected for the analysis of 11 HMs (Co, Cr, Cu, Fe, Mn, Ni, Pb, V, Zn, Be, and Hg) in 48 sites located in four regions of the Peruvian Amazon plain (Loreto, Amazonas, San Martín, and Ucayali), over the year 2019. The enrichment factor and geoaccumulation index were applied to assess contamination levels of HMs. The results indicated that topsoils and subsoils presented a greater enrichment by the elements Be and Pb, and were classified as moderately contaminated. Likewise, the integral analysis of these indexes together with principal component analysis, hierarchical cluster analysis, correlation analysis, and coefficient of variation allowed the identification of potential sources of contamination by HMs. As a result, Fe, Co, Zn, Ni, V, and Cr were associated with natural or lithogenic sources (parent material, crude oil deposits, and organic matter decomposition). Hg was attributed to anthropogenic sources (illegal gold mining, atmospheric deposition, and vehicle emissions). Be, Pb, Cu, and Mn originated from natural sources (parent material, crude oil deposits, decomposition of organic matter, and forest fires) and anthropogenic (areas degraded by solid waste, illegal gold mining, agriculture, and hydrocarbons). These findings provide essential information to establish regulations and prevent and control HM contamination in soils of the Peruvian Amazon plain.

Whole cell evaluation and the enzymatic kinetic study of urease from ureolytic bacteria affected by potentially toxic elements

Microbially induced carbonate precipitation (MICP) is a biomineralization process that has various applications in environmental pollution remediation and restoration of a range of building materials. In this study, a ureolytic bacterium, Lysinibacillus sp. GY3, isolated from an E-waste site, was found as a promising catalyst for remediation of heavy metals via the MICP process. This bacterial isolate produced significant amounts of urease and showed a great persistence in immobilization of potentially toxic elements. A reference ureolytic strain, Bacillus megaterium VS1, was selected in order to compare the efficiency of Lysinibacillus sp. GY3. Study on urease localization indicated 80 % more urease activity secreted extracellularly as for Lysinibacillus sp. GY3 compared to B. megaterium VS1. From the investigation on effects of metals on both intra- and extra-cellular urease, it was clear that Lysinibacillus sp. GY3 produced the most stable urease under conditions of metal pressure, especially retaining more than 70 % activity in the presence of 1 g/L Pb²⁺ and Zn²⁺. These results suggest that this isolated microorganism could be promisingly introduced in the MICP process to stabilize complex heavy metal pollutions, with reference to the regulating ability under harsh conditions to stabilize urease activity. This species is so important both for its biological features and environmental impacts. In addition, the present study will bring new insight in the field of metal remediation coupled with enzyme engineered biotechnology.

Potential hot spots contaminated with exogenous, rare earth elements originating from e-waste dismantling and recycling

Dismantling and recycling e-waste has been recognized as a potential emission source of rare earth elements (REEs). However, the presence of REEs in typical regional soils has yet to be studied. Given the potential health implications of such soil contamination, it is vital to study the characteristics, spatial distribution, and pollution level of REEs caused by e-waste dismantling as well as determine the influencing mechanism. This study focused on Guiyu Town as an example site, which is a typical e-waste dismantling base. From the site, 39 topsoil samples of different types were collected according to grid distribution points. Soil profiles were also collected in the dismantling and non-dismantling areas. The REE characteristic parameters showed that the REE distribution was abnormal and was affected by multiple factors. The results of the integrated pollution index showed that approximately 61.5% of soil samples were considered to be lightly polluted. Spatial distribution and correlation analysis showed that hot spots of REE-polluted soil coincided with known, main pollution sources. Moreover, there was a significant negative correlation (p ≤0.05) between the REE concentration and the distance from the pollution source. E-waste disassembly and recycling greatly affect the physical and chemical properties of the surrounding soil as well as downward migration areas. In the disassembly area, REE accumulated more easily in the surface layer (0-20 cm). Geographical detector results showed that distance factor was the main contribution factor for both light rare earth elements (LREE) and heavy rare earth element (HREE) (q = 34.59% and 53.33%, respectively). REE distribution in soil was nonlinear enhanced by different factors. Taken together, these results showed that e-waste disassembling and recycling not only directly affected the spatial distribution of REEs, but that their distribution was also affected by land use type and soil properties.

Spatial distribution and ecological risks of polychlorinated biphenyls in a river basin affected by traditional and emerging electronic waste recycling in South China

With development of e-waste related legislation in China, formal recycling activities are designated in some areas while informal ones are illegally transferred to emerging areas to avoid supervision. However, the resulting environmental impact and ecological risks are not clear. Here, we investigated the discharge of polychlorinated biphenyls (PCBs) to soil and aquatic environments by e-waste recycling activities in the Lian River Basin, China. The study area included a designated industrial park in the traditional e-waste recycling area (Guiyu, known as the world's largest e-waste center), several emerging informal recycling zones, and their surrounding areas and coastal area. A total of 27 PCBs were analyzed, and the highest concentration was found in an emerging site for soil (354 ng g^-1) and in a traditional site for sediment (1350 ng g^--1) respectively. The pollution levels were significantly higher in both the traditional and emerging recycling areas than in their respective upstream countryside areas (p = 0.0356 and 0.0179, respectively). Source analysis revealed that the traditional and emerging areas had similar PCB sources mainly associated with three PCB technical mixtures manufactured in Japan (KC600) and the USA (Aroclor 1260 and Aroclor 1262). The PCB pollution in their downstream areas including the coastal area was evidently affected by the formal and informal recycling activities through river runoff. The ecological risk assessments showed that PCBs in soils and sediments in the Lian River Basin could cause adverse ecotoxicological consequences to humans and aquatic organisms.

Novel insights into probabilistic health risk and source apportionment based on bioaccessible potentially toxic elements around an abandoned e-waste dismantling site

The study of potentially toxic element (PTE) hazards around e-waste recycling areas has attracted increasing attention but does not consider elemental bioaccessibility. Here, the respiratory and oral bioaccessibilities were incorporated into probabilistic health risk evaluation and source contribution apportionment. The results showed that soil Cd yielded the highest respiratory and oral bioaccessibility, whereas Cr in soils and vegetables attained the lowest oral bioaccessibility. When incorporating metal bioaccessibility into health risk assessment, a 48.3%-55.7% overestimation of non-cancer and cancer risks can be avoided relative to the risk assessment based on the total concentrations of PTEs. More importantly, priority control metals were misidentified without consideration of bioaccessibility. Cadmium, As, and Cr were screened as the priority metal(loid)s for targeted risk control based on the total PTEs, whereas Cd, Zn, and Cu were the priority metal(loid)s based on the bioaccessible PTEs. Furthermore, source apportionment revealed that >50% of oral bioaccessible Cd, Cu, Ni, Pb, and Zn in farmland were contributed by e-waste dismantling activities, whereas bioaccessible As and Cr mainly originated from agrochemical applications and natural sources, respectively. This study emphasizes the refinement of risk estimation and source apportionment through metal bioaccessibility adjustment, which facilitates the realistic assessment of adverse health effects in humans and the precise identification of high-risk sources.

E-WASTE threatens health: The scientific solution adopts the one health strategy

The aggressively extractive advanced technology industry thrives on intensive use of non-renewable resources and hyper-consumeristic culture. The environmental impact of its exponential growth means extreme mining, hazardous labour practices including child labour, and exposure burden to inorganic and organic hazardous chemicals for the environment and current and future human generations. Globally, processes such as in-country reduce, reuse and recycle have so far received less attention than outer-circle strategies like the uncontrolled dumping of e-waste in countries that are unprotected by regulatory frameworks. Here, in the absence of infrastructures for sound hazardous e-waste management, the crude recycling, open burning and dumping into landfills of e-waste severely expose people, animal and the environment. Along with economic, political, social, and cultural solutions to the e-waste global problem, the scientific approach based on risk analysis encompassing risk assessment, risk management and risk communication can foster a technical support to resist transgenerational e-waste exposure and health inequalities. This paper presents the latest public health strategies based on the use of integrated human and animal biomonitoring and appropriate biomarkers to assess and manage the risk of e-waste embracing the One Health approach. Advantages and challenges of integrated biomonitoring are described, along with ad-hoc biomarkers of exposure, effect and susceptibility with special focus on metals and metalloids. Indeed, the safe and sustainable management of novel technologies will benefit of the integration and coordination of human and animal biomonitoring.

Global PBDE contamination in cetaceans. A critical review

This review summarizes the most relevant information on PBDEs' occurrence and their impacts in cetaceans at global scale, with special attention on the species with the highest reported levels and therefore the most potentially impacted by the current and continuous release of these substances. This review also emphasizes the anthropogenic and environmental factors that could increase concentrations and associated risks for these species in the next future. High PBDE concentrations above the toxicity threshold and stationary trends have been related to continuous import of PBDE-containing products in cetaceans of Brazil and Australia, where PBDEs have never been produced. Non-decreasing levels documented in cetaceans from the Northwest Pacific Ocean might be linked to the increased e-waste import and ongoing production and use of deca-BDE that is still allowed in China. Moreover, high levels of PBDEs in some endangered species such as beluga whales (Delphinapterus leucas) in St. Lawrence Estuary and Southern Resident killer whales (Orcinus Orca) are influenced by the discharge of contaminated waters deriving from wastewater treatment plants. Climate change related processes such as enhanced long-range transport, re-emissions from secondary sources and shifts in migration habits could lead to greater exposure and accumulation of PBDEs in cetaceans, above all in those species living in the Arctic. In addition, increased rainfall could carry greater amount of contaminants to the marine environment, thereby, enhancing the exposure and accumulation especially for coastal species. Synergic effects of all these factors and ongoing emissions of PBDEs, expected to continue at least until 2050, could increase the degree of exposure and menace for cetacean populations. In this regard, it is necessary to improve current regulations on PBDEs and broader the knowledge about their toxicological effects, in order to assess health risks and support regulatory protection for cetacean species.

Effect-directed analysis for revealing aryl hydrocarbon receptor agonists in sediment samples from an electronic waste recycling town in China

Exposure to electronic and electrical waste (e-waste) has been related to a few adverse health effects. In this study, sediment samples from an e-waste recycling town in China were collected, and aryl hydrocarbon receptor (AhR) agonists in the samples were identified using an effect-directed analysis (EDA) strategy. The CBG2.8D cell line reporter gene bioassay was used as a toxicity test, while suspect screening against chemical databases was performed for potential AhR agonist identification where both gas chromatography- and liquid chromatography-high resolution mass spectrometry analyses were run. When the original sample extract showed high AhR-mediated activity, sample fractionation was performed, and fractions exhibiting high bioactivity were chemically analyzed again to reveal the corresponding AhR agonists. In total, 23 AhR agonists were identified, including 14 commonly known ones and 9 new ones. Benzo [k]fluoranthene and 6-nitrochrysene were the dominant AhR agonists, covering 16-71% and 2.7-12%, respectively, of the AhR activation effects measured in the parent extracts. The newly identified AhR-active chemicals combined explained 0.13-0.20% of the parent extracts' effects, with 7,12-dimethylbenz [a]anthracene and 8,9,11-trimethylbenz [a]anthracene being the major contributors. A diagnostic isomer ratio analysis of polycyclic aromatic hydrocarbons suggested that the major source of AhR agonists identified in these e-waste related sediment samples were probably petroleum product combustion and biomass combustion. In the future, for a more comprehensive AhR agonist investigation, in-house chemical synthesis and purification, and, when necessary, a secondary sample fractionation, would be beneficial.

Assessing oxidative stress resulting from environmental exposure to metals (Oids) in a middle Eastern population

Concentrations of metals and metalloids derived mainly from anthropogenic activities have increased considerably in the environment. Metals might be associated with increase reactive oxygen species (ROS) damage, potentially related to several health outcomes. This study has recruited 200 adult participants, including 110 males and 90 females in Shiraz (Iran), to investigate the relationship between chronic exposure to metals and ROS damage by analyzing malondialdehyde (MDA) and 8-Oxo-2'-deoxyguanosine (8-OHdG) concentrations, and has evaluated the associations between chronic metal exposure and ROS damage using regression analysis. Our findings showed participants are chronically exposed to elevate As, Ni, Hg, and Pb levels. The mean urinary concentrations of 8-OHdG and MDA were 3.8 ± 2.35 and 214 ± 134 µg/g creatinine, respectively. This study shows that most heavy metals are correlated with urinary ROS biomarkers (R ranges 0.19 to 0.64). In addition, regression analysis accounting for other confounding factors such as sex, age, smoking status, and teeth filling with amalgam highlights that Al, Cu, Si and Sn are associated with 8-OHdG concentrations, while an association between Cr and MDA and 8-OHdG is suggested. Smoking cigarettes and water-pipe is considered a significant contributory factor for both ROS biomarkers (MDA and 8-OHdG).

Forecasting e-waste recovery scale driven by seasonal data characteristics: A decomposition-ensemble approach

Forecasting the scale of e-waste recycling is the basis for the government to formulate the development plan of circular economy and relevant subsidy policies and enterprises to evaluate resource recovery and optimise production capacity. In this article, the CH-X12 /STL-X framework for e-waste recycling scale prediction is proposed based on the idea of 'decomposition-integration', considering that the seasonal data characteristics of quarterly e-waste recycling scale data may lead to large forecasting errors and inconsistent forecasting results of a traditional single model. First, the seasonal data characteristics of the time series of e-waste recovery scale are identified based on Canova-Hansen (CH) test, and then the time series suitable for seasonal decomposition is extracted with X12 or seasonal-trend decomposition procedure based on loess (STL) model for seasonal components. Then, the Holt-Winters model was used to predict the seasonal component, and the support vector regression (SVR) model was used to predict the other components. Finally, the linear sum of the prediction results of each component is used to obtain the final prediction result. The empirical results show that the proposed CH-X12/STL-X forecasting framework can better meet the modelling requirements for time-series forecasting driven by different seasonal data characteristics and has better and more stable forecasting performance than traditional single models (Holt-Winters model, seasonal autoregressive integrated moving average model and SVR model).

Managing e-waste from a closed-loop lifecycle perspective: China's challenges and fund policy redesign

E-waste is one of the fastest growing streams of solid waste globally, and its effective management has become a focused issue, which requires a deep understanding of the core guiding theory of extended producer responsibility (EPR). Over the past 20 years, China, one of the world's largest producers of electrical and electronic equipment (EEE), has made great efforts to improve e-waste management along with the massive generation of e-waste. In 2012, China implemented a unique EPR-based e-waste fund policy. However, the fund policy is unsustainable due to the challenges of non-closed resource use, informal recycling, and fund imbalance. Beginning with an overview of these challenges, this paper focuses on redesigning the fund policy from a closed-loop lifecycle perspective in order to maintain a balanced development of the resource use loop and the fund system in China's ten-year plan. In doing so, two EPR instruments, recycling content standards and consumer-oriented deposits, are added to the current fund policy. Subsequently, three extension scenarios alternately changed a critical parameter of the model to test the impact on sustainable capabilities. In this way, the sustainable supply of funds and secondary resources for the e-waste industry can be established in China and effectively demonstrate solid waste management in developing countries.

Analysis of environmental sustainability of e-waste in developing countries - a case study from Pakistan

The electronic waste generation rate is increasing drastically at a rate of 3 to 5% per year in developing countries. The aim of this study is to analyze the environmental sustainability and economic benefits of such e-waste management in the developing economies like Pakistan. The life cycle assessment (LCA) method has been employed for streamlined impact analysis of the end-of-life processing of e-waste focusing mainly on laptop computers and liquid crystal display (LCD) desktop computers in Pakistan. The method of cumulative exergy extraction from the natural environment (CEENE) has also been deployed for the relative assessment of resources' consumption of e-waste recycling versus landfilling scenario. The determined impact scores are 1.79E + 03 kg CO₂ eq., 7.19E-07 kg CFC-11 eq., 1.02E + 03 kg 1,4-DCB, 7.13E + 01 kg 1,4-DCB, and 3.41E-03 kg Cu eq. in climate change potential, stratospheric ozone depletion, ecotoxicity potential, human noncarcinogenic potential, and mineral resource depletion impact categories, respectively. The results of CEENE analysis reveal that approximately 80% of the impact on natural resources is reduced by the efficient recycling of e-waste. The comparative assessment of respective scores for current and target material weight recovery (MWR) indicators represented that by increasing the MWR indicator by 33.8% for laptop computers and by 27.2% for LCD computers, the country will achieve an annual economic benefit of US $191.56 million. This is greatly significant for a transitional shift towards e-waste revalorization while realizing the objectives of sustainable resource consumption. Innovative improvement measures ensuring economically feasible, energy-efficient, and environment friendly waste collection, treatment, and recycling practices present an invaluable opportunity for developing countries.

Temporal Trends of Alternative Halogenated Flame Retardants in Humpback Dolphins from the South China Sea

Increasing human activities are altering marine ecosystems, which may have ramifications for predator feeding ecology and, thus, the degree of contaminant exposure. We conducted the first investigation of spatiotemporal trends for nine alternative halogenated flame retardants (AHFRs) and their relations with dietary variations in 128 humpback dolphins that were stranded along the northern South China Sea during 2003-2020. We detected the highest levels of seven major AHFRs in humpback dolphins compared with the results reported in cetaceans globally, indicating high AHFR contamination in coastal regions of South China. Dolphins that were stranded near urban regions generally contained higher AHFR concentrations than those that were stranded near rural areas, mirroring the environmental trends of AHFRs occurring in this area. Model-generated diet estimates suggested that humpback dolphins have reduced their consumption of high trophic-level prey in recent years, likely attributable to overfishing-induced prey decline in this region. After adjusting AHFR concentrations due to diet changes, the temporal trends of AHFR contamination in humpback dolphins were only slightly altered. Our results suggest that increasing discharges of AHFRs into the South China Sea during the 2000s and 2010s may have had a greater influence on AHFR trends in humpback dolphins than dietary shifts.

A Review on Global Emissions by E-Products Based Waste: Technical Management for Reduced Effects and Achieving Sustainable Development Goals

In the 21st century, a great amount of electrical and electronic waste (e-waste) has accumulated, and the unregulated nature of its disposal and recycling represents a particular hazard in a global context. For the purposes of e-waste management, there must be more emphasis on the scientific processes for recycling, reusing and remanufacturing precious materials. Resource management is related to energy management; therefore, the harvesting of costly materials from e-waste is important for both energy management and sustainable development. At present, a lack of scientific recycling of a significant amount of e-waste is a source of environmental pollution and health hazards that are having a detrimental effect on sustainable development goals. It is necessary to find a process for recovering valuable materials from e-waste with the minimum possible environmental impact. At present, it is essential to modify the process of electrical and electronic products (e-products) becoming e-waste, and the subsequent process of e-waste recycling, in order to lessen the impact in terms of pollution. E-waste scientific recycling initiatives can reduce the environmental impact of the process, which in turn can support a shift from the current linear flow of costly materials to a more sustainable circular flow. Furthermore, internal consumption loss, emissions, and heating loss from e-products are the main factors contributing to the loss of energy efficiency in the process, which in turn contributes to environmental pollution. Promoting green innovation in the manufacturing process of e-products, as well as their reuse, can reduce the environmental impact of e-waste in near future. Both of these pathways are imperative for a less polluted, low-toxic environment and sustainable development. However, the sustainable development initiative of the United Nation Environmental Programme (UNEP) policy framework is the ultimate goal. This is expected to support the management of environmental pollution, maintaining it at an acceptable level, while also preventing hazardous risks to human health. Hence, this review examines the prospects for achievable environmental sustainability through technological developments.

The world-wide waste web

Countries globally trade with tons of waste materials every year, some of which are highly hazardous. This trade admits a network representation of the world-wide waste web, with countries as vertices and flows as directed weighted edges. Here we investigate the main properties of this network by tracking 108 categories of wastes interchanged in the period 2001–2019. Although, most of the hazardous waste was traded between developed nations, a disproportionate asymmetry existed in the flow from developed to developing countries. Using a dynamical model, we simulate how waste stress propagates through the network and affects the countries. We identify 28 countries with low Environmental Performance Index that are at high risk of waste congestion. Therefore, they are at threat of improper handling and disposal of hazardous waste. We find evidence of pollution by heavy metals, by volatile organic compounds and/or by persistent organic pollutants, which are used as chemical fingerprints, due to the improper handling of waste in several of these countries.

The 2001–2019 web of international waste trade is investigated, allowing the identification of countries at threat of improper handling and disposal of waste. Chemical tracers are used to identify the environmental impact of waste in these countries.