First evidence of microplastic contamination in the freshwater of Lake Guaíba, Porto Alegre, Brazil

Enhanced flotation removal of polystyrene nanoplastics by chitosan modification: Performance and mechanism

Nanoplastics are difficult to remove from water using conventional flotation processes due to their stability and resistance to biodegradation. Here, polystyrene nanoplastics (PSNPs) were selected as the object of study. In addition, chitosan (CTS), an environmentally friendly natural cationic polymer, was selected to modify the air flotation process to improve the separation of PSNPs using air flotation. Adding chitosan effectively enhanced the removal of PSNPs using air flotation from 3.1 % to 96.7 %. The residual concentration decreased from 9.69 mg/L to 0.33 mg/L. Removal of PSNPs by CTS-modified air flotation was maintained at 92.8 % even when the air flotation time was significantly shortened. The zeta potential alterations demonstrated robust electrostatic attraction within the CTS-modified air flotation process. The contact angle measurements indicated that incorporating CTS could enhance the hydrophobic interaction between bubbles and PSNPs. PSNPs particles around 100 nm agglomerated to form floating flocs with a particle size of more than 4500 nm. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) images confirmed the presence of tight adhesion between PSNPs and CTS, indicating the presence of bridging adsorption during the process. The major PSNPs removal mechanisms included electrostatic attraction, enhancement of hydrophobicity, and bridging adsorption. Increasing the aeration volume could improve the removal rate, but this improvement was finite. Weakly acidic and low ionic strength conditions favored PSNPs removal. The CTS-modified air flotation process showed great potential for PSNPs removal from real water bodies.

Microplastics monitoring in freshwater systems: A review of global efforts, knowledge gaps, and research priorities

The escalating production of synthetic plastics and inadequate waste management have led to pervasive microplastic (MP) contamination in aquatic ecosystems. MPs, typically defined as particles smaller than 5 mm, have become an emerging pollutant in freshwater environments. While significant concern about MPs has risen since 2014, research has predominantly concentrated on marine settings, there is an urgent need for a more in-depth critical review to systematically summarize the current global efforts, knowledge gaps, and research priorities for MP monitoring in freshwater systems. This review evaluates the current understanding of MP monitoring in freshwater environments by examining the distribution, characteristics, and sources of MPs, alongside the progression of analytical methods with quantitative evidence. Our findings suggest that MPs are widely distributed in global freshwater systems, with higher abundances found in areas with intense human economic activities, such as the United States, Europe, and China. MP abundance distributions vary across different water bodies (e.g., rivers, lakes, estuaries, and wetlands), with sampling methods and size range selections significantly influencing reported MP abundances. Despite great global efforts, there is still a lack of harmonized analyzing framework and understanding of MP pollution in specific regions and facilities. Future research should prioritize the development of standardized analysis protocols and open-source MP datasets to facilitate data comparison. Additionally, exploring the potential of state-of-the-art artificial intelligence for rapid, accurate, and large-scale modeling and characterization of MPs is crucial to inform effective strategies for managing MP pollution in freshwater ecosystems.

Unveiling the ecotoxicological impact of microplastics on organisms - the persistent organic pollutant (POP): A comprehensive review

Microplastics have been ubiquitous in our environment for decades, and numerous studies have revealed their extensive dispersion, reaching far beyond the surface of the land, soil, aquatic ecosystems. They have infiltrated the food-chain, the food web, even the air we breathe, as well as the water we drink. Microplastics have been detected in the food we consume, acting as vectors for hazardous chemicals that adhere to their hydrophobic surfaces. This can result in the transfer of these chemicals to the aquatic life, posing a threat to their well-being. The release of microplastics into different environmental settings can give rise to various eco-toxicological implications. The substantial body of literature has led scientists to the consensus that microplastic pollution is a global problem with the potential to impact virtually any type of ecosystem. This paper aims to discuss crucial information regarding the occurrence, accumulation, and ecological effects of microplastics on organisms. It also highlights the new and emerging disease named "Plasticosis" that is directly linked to microplastics and its toxicological effects like permanent scarring and long-term inflammation in the digestive system of the seabirds. By comprehending the behaviour of these microplastic pollutants in diverse habitats and evaluating their ecological consequences, it becomes possible to facilitate a better understanding of this toxicological issue.

Integrated occurrence of contaminants of emerging concern, including microplastics, in urban and agricultural watersheds in the State of São Paulo, Brazil

Contaminants of emerging concern (CECs), including microplastics, have been the focus of many studies due to their environmental impact, affecting biota and human health. The diverse land uses and occupation of watersheds are important parameters driving the occurrence of these contaminants. CECs such as pesticides, drugs, hormones, and industrial-origin substances were analyzed in urban/industrial (Atibaia) and agricultural (Preto/Turvo) watersheds located in São Paulo state, Brazil. A total of 24 CECs were investigated, and, as a result, only 5 (caffeine, carbendazim, atrazine, ametrine and 2-hydroxytrazine) were responsible for 81.73 % of the statistical difference between watersheds contamination profile. The Atibaia watershed presented considerable concentrations of caffeine (ranging from 75 to 2025 ng L-1), while carbendazim (44 to 1144 ng L-1) and atrazine (3 to 266 ng L-1) presented highest levels in Preto/Turvo watershed. In all sampling points, the cumulative potential aquatic life risk assessed by the NORMAN database indicates some level of environmental concern associated to pesticides and caffeine (risk quotient >1). Microplastics had been analyzed in both watersheds, being the white/transparent fragments in size between 100 and 250 μm the most detected in this study. The estimated abundance in the Atibaia watershed ranged from 349 to 2898 items m-3 presenting some influence of pluviosity, while in Rio Preto/Turvo ranged from 169 to 6370 items m-3, being more abundant in the dam area without a clear influence of pluviosity. In both basins, polyethylene and polypropylene were the most detected polymers, probably due to the intense use of single-use plastics in urban areas. Possibly, due to the distinct physic-chemical properties of microplastics and organic CECs, no correlations were observed between their occurrence, which makes us conclude that they have different transport mechanism, behavior, and fate in the environment.

Severe microplastic pollution risks in urban freshwater system post-landfill fire: A case study from Brahmapuram, India

To investigate the escalating issue of microplastic (MP), pollution in urban water bodies, this study focuses on the aftermath of the Brahmapuram landfill fire in Kochi, India, analyzing its impact on MP concentrations in nearby freshwater system. The study conducted sampling sessions at the landfill site immediately before and after the fire. Post-fire, findings demonstrated a substantial increase in MP concentrations in surface waters, with levels rising from an average 25793.33 to 44863.33 particles/m³, featuring a notable presence of larger, predominantly black MPs. Sediment samples showed no significant change in MP count, but there was a significant increase in mass concentration. SEM/EDS analysis revealed changes in surface morphology and elemental composition, suggesting thermal degradation. Risk assessment using the Microplastic Pollution Index (MPI) and Risk Quotient (RQ) methods indicated heightened MP pollution risk in surface water post-fire. Hierarchical cluster analysis revealed the landfill's proximity as a significant factor influencing MP characteristics in the aquatic system. The study highlights the escalated challenge of MP pollution in urban water bodies following environmental disasters like landfill fires, underscoring the urgent need for policy and environmental management strategies.

Microplastics in multi-environmental compartments: Research advances, media, and global management scenarios

During the past decades, microplastics (MPs) have become an emerging concern due to their persistence and potential environmental threat. MP pollution has become so drastic that it has been found in the human food chain, breast milk, polar regions, and even the Himalayan basin, lake, etc. Inflammation, pulmonary hypertension, vascular occlusions, increased coagulability and blood cell cytotoxicity, disruption of immune function, neurotoxicity, and neurodegenerative diseases can all be brought on by severe microplastic exposure. Although many MPs studies have been performed on single environmental compartments, MPs in multi-environmental compartments have yet to be explored fully. This review aims to summarize the muti-environmental media, detection tools, and global management scenarios of MPs. The study revealed that MPs could significantly alter C flow through the soil-plant system, the structure and metabolic status of the microbial community, soil pH value, biomass of plant shoots and roots, chlorophyll, leaf C and N contents, and root N contents. This review reveals that MPs may negatively affect many C-dependent soil functions. Different methods have been developed to detect the MPs from these various environmental sources, including microscopic observation, density separation, Raman, and FT-IR analysis. Several articles have focused on MPs in individual environmental sources with a developed evaluation technique. This review revealed the extensive impacts of MPs on soil-plant systems, microbial communities, and soil functions, especially on water, suggesting possible disturbances to vital ecological processes. Furthermore, the broad range of detection methods explored emphasizes the significance of reliable analytical techniques in precisely evaluating levels of MP contamination in various environmental media. This paper critically discusses MPs' sources, occurrences, and global management scenarios in all possible environmental media and ecological health impacts. Future research opportunities and required sustainable strategies have also been suggested from Bangladesh and international perspectives based on challenges faced due to MP's pollution.

The retention of plastic particles by macrophytes in the Amazon River, Brazil

This study evaluated the presence of plastics and microplastics in macrophytes in an urbanized sector of the Amazon River. A total of 77 quadrats in 23 macrophyte banks were sampled during the dry (September 2020) and rainy (June 2021) season. Five species were identified: Paspalum repens, Pontederia rotundifolia, Pistia stratiotes, Salvinia auriculata and Limnobium laevigatum, with P. repens being dominant during the dry season (47.54%) and P. rotundifolia during the rainy season (78.96%). Most of the plastic particles accumulated in Paspalum repens (49.3%) and P. rotundifolia (32.4%), likely due to their morphological structure and volume. The dry season showed a higher accumulation of plastic particles than the rainy season. Microplastics were found in most samples, during both the dry (75.98%) and rainy seasons (74.03%). The upstream macrophyte banks retained more plastic particles compared to the downstream banks. A moderate positive correlation was observed between the presence of plastic particles and macrophyte biomass, and a weak positive correlation between the occurrence of microplastics and mesoplastics. White and blue fragments, ranging from 1 to 5 mm were the most common microplastics found in the macrophyte banks. Green fragments and green and blue fibers were identified as polypropylene, blue and red fragments as polyethylene, and white fragments as polystyrene. Therefore, the results of this study highlight the first evidence of the retention of plastic particles in macrophytes of the Amazon and highlight a significant risk due to the harmful effects that this type of plastic can cause to the fauna and flora of aquatic ecosystems.

Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

Microplastic pollution responses to spatial and seasonal variations and water level management in a polymictic tropical reservoir (São Paulo, Brazil)

We assessed microplastic (μP) pollution in water and sediment samples during the dry and rainy season (October/2018 and March/2019, respectively) from the Guarapiranga Reservoir in the Metropolitan Region of São Paulo, Brazil, which provides drinking water for up to 5.2 million people. The concentration of mPs varied spatially and seasonally, with the higher concentrations observed near the urbanized areas and during the dry season. Water column concentrations ranged from 150 to 3100 particles/m3 and 0.07-25.05 mm3 plastic/m3 water during the dry season, and 70-7900 particles/m3 and 0.06-4.57 mm3 plastic/m3 water during the rainy season. Sediment samples were collected only during the rainy season, with concentrations ranging from 210 to 22,999 particles/kg dry weight and 0.15-111.46 mm3/kg dry weight. The particle size distribution exhibited seasonal variation, with μPs >1 mm predominating during the dry season, constituting 60-75% of all particles. In terms of quantity, fibers accounted for the majority of microplastics, comprising 55-95% during the dry season and 70-92% during the rainy season. However, when considering particle volume, irregular particles dominated in some samples, accounting for up to 95% of the total amount. The predominant colors of microplastics were white/crystal, black, and blue, with the main compositions identified as polypropylene (PP) and polyethylene terephthalate (PET), suggesting the influence of untreated domestic sewage discharge. Additionally, some additives were detected, including the pigments Fast RED ITR and phthalocyanine blue. The management of reservoir water levels appears to influence the quantity of μPs in the water column. As the water level increases up to 90% of the reservoir capacity during the rainy season, the amount of μPs in the water decreases, despite the higher influx of particles resulting from surface runoff caused by rainy conditions. This suggests a "dilution" effect combined to the polymictic mixing hydrodynamics. Our results may contribute to the creation and improvement of monitoring programs regarding mP pollution and to the adoption of specific public policies, which are still lacking in legislation.

Microplastic pollution in high-altitude Nainital lake, Uttarakhand, India

Microplastics (MPs) contamination has been reported in all environmental compartments, but very limited information is available at higher-altitude lakes. Nainital Lake, located at a high altitude in the Indian Himalayas, has various ecosystem services and is the major source of water for Nainital town, but the MP abundance is still unknown. This study presents the first evidence of the abundance and distribution of MP in Nainital Lake. Surface water and sediment samples were analysed from 16 different sites in and around the catchment area of Nainital Lake. The MP were observed in all the samples, and their abundance in surface water was 8.6-56.0 particles L-1 in the lake and 2.4-88.0 particles L-1 in hotspot sites. In the surface sediment, MP abundance ranged from 0.4-10.6 particles g-1, while in the hotspot sediment, the mean abundance was 0.6 ± 0.5 particles g-1. Fibers were the dominant MP, while 0.02-1 mm were the predominant size of MP particles. The results of chemical characterization showed the presence of six polymers, among which high-density polyethylene was the most abundant. The Polymer Hazard Index assessment classified the identified polymers as low-to high-risk categories, with a higher abundance of low- (polypropylene) and medium- (polyethylene)-risk polymers. Tourist activities and run-off catchments can be considered the major sources of MP, which can affect the ecosystem. Minimal concentrations of MP were observed in the tube well and drinking water, which depicts the direct risks to humans and, thus, the need for remedial measures to prevent MP contamination in drinking water. This study improves the knowledge of MP contamination in the higher-altitude freshwater lake, which can be the major pathway for the transport of MP to the rivers, and also emphasizes the need for waste management in Nainital town.

Microplastic in clams: An extensive spatial assessment in south Brazil

Microplastic pollution is becoming a continuously growing environmental concern, while bivalve mollusks are particularly vulnerable due to their sessile habits and feeding through water filtration processes. Microplastic incidence in soft tissues of the clam Amarilladesma mactroides was assessed along unconsolidated substrates distributed in extensive coastal regions of southern Brazil. Influence of urbanization levels, distance to rivers and local hydrodynamics on microplastic accumulation by the clam was tested. The average concentration of microplastics was high (3.09 ± 2.11 particles.g-1), considering 16 sampled sites. Particles were mainly composed by polyamide, polyethylene and polyethylene terephthalate, while were mainly smaller, fibrous and colorless. High urbanization and closer proximity to rivers insured higher contamination, which is a trend observed globally. No influence of coastal hydrodynamics was seen. Considering obtained findings, A. mactroides presents good potential to be used as a valuable tool to assess microplastic contamination in unconsolidated substrates of beach areas.

Microplastic pollution calls for urgent investigations in stygobiont habitats: A case study from Classical karst

Microplastic pollution in karst systems is still poorly studied, despite the presence of protected species and habitats, and important water reserves. Vulnerable key species hosted in these habitats could consume or assimilate microplastics, which can irreversibly damage management efforts, and thus ecosystems functionality. This can be particularly true for subterranean water habitats where microplastic pollution effects on wildlife management programs are not considered. The aim of this study is to provide a case study from the Classical Karst Region, which hosts peculiar habitats and key species protected at European level, such as the olm Proteus anguinus. As this area has been deeply exploited and modified over time, and is adjacent to highways, roads and railways, which could contribute to pollution within the karst system, threatening the ecosystems, it provides a perfect model system. In this study we collected and investigated water and sediment samples from aquatic environments of surface and subterranean habitats hosting several subterranean environment-adapted organisms. Examined particles were counted and characterized by size, color and shape via visual identification under a microscope, with and without UV light. Furthermore, spectroscopic analyses were carried out in order to identify microplastics typology. Microplastics were found in all examined habitats. In water, microplastics concentration ranged from 37 to 86 items/L, in sediments from 776 to 2064 items/kg. Fibre-shape was the main present, followed by fragments and beads, suggesting multiple sources of pollution, especially textile products. Most of the particles were fluorescent under UV light and were mainly transparent, while not-fluorescent ones were especially black, blue or brown. Samples contained especially polyesters and copolymers. These results highlight intense MP pollution in karst areas, with significant impacts on water quality, and potential effects on subterranean environment-dwelling species. We stress the importance of monitoring pollution in these critical environments for biodiversity and habitat conservation: monitoring in karst areas must become a priority for habitat and species protection, and water resources management, improving analyses on a larger number of aquatic surface and subterranean habitats.

The possible impacts of nano and microplastics on human health: lessons from experimental models across multiple organs

The widespread production and use of plastics have resulted in accumulation of plastic debris in the environment, gradually breaking down into smaller particles over time. Nano-plastics (NPs) and microplastics (MPs), defined as particles smaller than 100 nanometers and 5 millimeters, respectively, raise concerns due to their ability to enter the human body through various pathways including ingestion, inhalation, and skin contact. Various investigators demonstrated that these particles may produce physical and chemical damage to human cells, tissues, and organs, disrupting cellular processes, triggering inflammation and oxidative stress, and impacting hormone and neurotransmitter balance. In addition, micro- and nano-plastics (MNPLs) may carry toxic chemicals and pathogens, exacerbating adverse effects on human health. The magnitude and nature of these effects are not yet fully understood, requiring further research for a comprehensive risk assessment. Nevertheless, evidence available suggests that accumulation of these particles in the environment and potential human uptake are causes for concern. Urgent measures to reduce plastic pollution and limit human exposure to MNPLs are necessary to safeguard human health and the environment. In this review, current knowledge regarding the influence of MNPLs on human health is summarized, including toxicity mechanisms, exposure pathways, and health outcomes across multiple organs. The critical need for additional research is also emphasized to comprehensively assess potential risks posed by degradation of MNPLs on human health and inform strategies for addressing this emerging environmental health challenge. Finally, new research directions are proposed including evaluation of gene regulation associated with MNPLs exposure.

Biofragmentation of Polystyrene Microplastics: A Silent Process Performed by Chironomus sancticaroli Larvae

Polystyrene (PS) is one of the main synthetic polymers produced around the world, and it is present in the composition of a wide variety of single-use objects. When released into the environment, these materials are degraded by environmental factors, resulting in microplastics. We investigated the ability of Chironomus sancticaroli (Diptera, Chironomidae) to promote the fragmentation of PS microspheres (24.5 ± 2.9 μm) and the toxic effects associated with exposure to this polymer. C. sancticaroli larvae were exposed to 3 different concentrations of PS (67.5, 135, and 270 particles g-1 of dry sediment) for 144 h. Significant lethality was observed only at the highest concentration. A significant reduction in PS particle size as well as evidence of deterioration on the surface of the spheres, such as grooves and cracks, was observed. In addition, changes in oxidative stress biomarkers (SOD, CAT, MDA, and GST) were also observed. This is the first study to report the ability of Chironomus sp. to promote the biofragmentation of microplastics. The information obtained demonstrates that the macroinvertebrate community can play a key role in the degradation of plastic particles present in the sediment of freshwater environments and can also be threatened by such particle pollution.

Sediment-associated microplastics in Chilika lake, India: Highlighting their prevalence, polymer types, possible sources, and ecological risks

The primary objective of this research was to assess microplastics (MPs) in the sediments of Chilika lake. MPs were extracted from 22 sediment samples using the density separation method combined with vacuum pump filtration. A stereo-zoom microscope and Raman spectroscopy were employed to identify the sediment-associated MPs. The total MPs collected from all 22 sites was 440 ± 3.53 particles kg-1 wet sediments, with sizes ranging between 50 and 500 μm. In terms of morphology, fibers and fragments emerged as the dominant MP types, with counts of 210 ± 1.66 and 175 ± 1.76 particles kg-1 wet sediments, respectively. Raman spectroscopy verified the presence of various MP polymers in the sediments, predominantly HDPE (37 %), followed by PS (20 %), PET (18 %), PA (11 %), PP (7 %), and PC (7 %). A notable color variation was observed in MPs; black being the most prevalent (38.8 %), succeeded by blue (19.5 %), green (11.8 %), white (11.5 %), red (10.6 %), and transparent (7.5 %). ANOVA results indicated significant (p > 0.05) variations in MP abundance across the 22 sampling locations. However, principal component analysis (PCA) and multiple regression analysis indicated that water quality parameters did not significantly influence MP abundance, yet it was found that MP retention was higher in fine-grained sediments like clay and silt. The leading sources of MPs in Chilika lake were found to be aquafarming, trailed by river and sewage discharges, fishing activities, antifouling coatings and tourism. Additionally, the pollution load index (PLI) was employed to gauge the ecological risks, categorizing the lake under risk category 1, which implies a minimal level of MPs pollution. This research aims to serve as an early warning system for MPs pollution in productive brackish water habitats globally, including Chilika lake, guiding policymakers towards appropriate management strategies and preventive measures.

Responses of submerged macrophytes to different particle size microplastics and tetracycline co-pollutants at the community and population level

Microplastics (MPs) and antibiotics are ubiquitous in aquatic ecosystems, and their accumulation and combined effects are considered emerging threats that may affect biodiversity and ecosystem function. The particle size of microplastics plays an important role in their combined effects with antibiotics. Submerged macrophytes are crucial in maintaining the health and stability of freshwater ecosystems. However, little is known about the combined effects of different particle size of MPs and antibiotics on freshwater plants, particularly their effects on submerged macrophyte communities. Thus, there is an urgent need to study their effects on the macrophyte communities to provide essential information for freshwater ecosystem management. In the present study, a mesocosm experiment was conducted to explore the effects of three particle sizes (5 µm, 50 µm, and 500 µm) of polystyrene-microplastics (PSMPs) (75 mg/L), tetracycline (TC) (50 mg/L), and their co-pollutants on interactions between Hydrilla verticillata and Elodea nuttallii. Our results showed that the effects of MPs are size-dependent on macrophytes at the community level rather than at the population level, and that small and medium sized MPs can promote the growth of the two test macrophytes at the community level. In addition, macrophytes at the community level have a stronger resistance to pollutant stress than those at the population level. Combined exposure to MPs and TC co-pollutants induces species-specific responses and antagonistic toxic effects on the physio-biochemical traits of submerged macrophytes. Our study provides evidence that MPs and co-pollutants not only affect the morphology and physiology at the population level but also the interactions between macrophytes. Thus, there are promising indications on the potential consequences of MPs and co-pollutants on macrophyte community structure, which suggests that future studies should focus on the effects of microplastics and their co-pollutants on aquatic macrophytes at the community level rather than only at the population level. This will improve our understanding of the profound effects of co-pollutants in aquatic environments on the structure and behavior of aquatic communities and ecosystems.

The path of microplastics through the rare biodiversity estuary region of the northern Bay of Bengal

Due to its harmful effects on ecosystems and human health, microplastic (MP) pollution has become a significant environmental problem on a global scale. Although MPs' pollution path and toxic effects on marine habitats have been examined worldwide, the studies are limited to the rare biodiversity estuary region of Hatiya Island from the northern Bay of Bengal. This study aimed to investigate the MP pollution path and its influencing factors in estuarine sediments and water in rare biodiversity Hatiya Island in the northern Bay of Bengal. Sixty water and sediment samples were collected from 10 sampling sites on the Island and analyzed for MPs. The abundance of MPs in sediment ranged from 67 to 143 pieces/kg, while the abundance in water ranged from 24.34 to 59 pieces/m3. The average concentrations of MPs in sediment and water were 110.90 ± 20.62 pieces/kg and 38.77 ± 10.09 pieces/m3, respectively. Most identified MPs from sediment samples were transparent (51%), while about 54.1% of the identified MPs from water samples were colored. The fragment was the most common form of MP in both compartments, with a value of 64.6% in sediment samples and 60.6% in water samples. In sediment and water samples, almost 74% and 80% of MP were <0.5 mm, respectively. Polypropylene (PP) was the most abundant polymer type, accounting for 51% of all identified polymers. The contamination factor, pollution load index, polymer risk score, and pollution risk score values indicated that the study area was moderately polluted with MPs. The spatial distribution patterns and hotspots of MPs echoed profound human pathways. Based on the results, sustainable management strategies and intervention measures were proposed to reduce the pollution level in the ecologically diverse area. This study provides important insights into evaluating estuary ecosystem susceptibility and mitigation policies against persistent MP issues.

Biodegradation of microplastics: Advancement in the strategic approaches towards prevention of its accumulation and harmful effects

Microplastics (MPs) are plastic particles in a size ranging from 1 mm to 5 mm in diameter, and are formed by the breakdown of plastics from different sources. They are emerging environmental pollutants, and pose a great threat to living organisms. Improper disposal, inadequate recycling, and excessive use of plastic led to the accumulation of MP in the environment. The degradation of MP can be done either biotically or abiotically. In view of that, this article discusses the molecular mechanisms that involve bacteria, fungi, and enzymes to degrade the MP polymers as the primary objective. As per as abiotic degradation is concerned, two different modes of MP degradation were discussed in order to justify the effectiveness of biotic degradation. Finally, this review is concluded with the challenges and future perspectives of MP biodegradation based on the existing research gaps. The main objective of this article is to provide the readers with clear insight, and ideas about the recent advancements in MP biodegradation.

Phytoremediation: A promising approach to remove microplastics from the aquatic environment

Due to the increasing amount of microplastics (MPs) in the environment, various technologies for their removal have been investigated. One of the possible technologies are phytoremediation methods, but insufficient understanding of the interactions between MPs and aquatic macrophytes limits their further development. In this context, the aim of this study was to investigate the interactions between polyethylene MPs and the floating aquatic macrophyte Lemna minor in terms of the extent and time frame of MPs adhesion to the plant biomass, the stability of the interactions under water movement and understanding the nature of the adsorption process through the adsorption isotherm models. The results showed that the maximum number of adhered MPs was reached after 24 h. With increased amount of plant biomass the number of adhered MPs increased as well. Slow movement of water had no statistically significant effect on the adhesion of MPs. Among several adsorption models, the Freundlich adsorption isotherm model was the best fit to the experimental data, which assumes weak binding of MPs to plant biomass. Finally, 79% of MPs was removed during 15 cycles of phytoremediation (i.e., the biomass was removed and replaced with new biomass 15 times) and it was calculated that 53 cycles would be needed to remove all MPs from the water phase under test conditions.

Does microplastic analysis method affect our understanding of microplastics in the environment?

Two analytical methods - both in active use at different laboratories - were tested and compared against each other to investigate how the procedure influences microplastic (MP) detection with micro Fourier Transform Infrared Spectroscopy (μFTIR) imaging. A representative composite water sample collected from the Danube River was divided into 12 subsamples, and processed following two different methods, which differed in MP isolation procedures, the optical substrate utilized for the chemical imaging, and the detection limit of the spectroscopic instruments. The first instrument had a nominal pixel resolution of 5.5 μm, while the second had a nominal resolution of 25 μm. These two methods led to different MP abundance, MP mass estimates, but not MP characteristics. Only looking at MPs > 50 μm, the first method showed a higher MP abundance, namely 418-2571 MP m-3 with MP mass estimates of 703-1900 μg m-3, while the second method yielded 16.7-72.1 MP m-3 with mass estimates of 222-439 μg m-3. Looking deeper into the steps of the methods showed that the MP isolation procedure contributed slightly to the difference in the result. However, the variability between individual samples was larger than the difference caused by the methods. Somewhat sample-dependent, the use of two different substrates (zinc selenide windows versus Anodisc filters) caused a substantial difference between results. This was due to a higher tendency for particles to agglomerate on the Anodisc filters, and an 'IR-halo' around particles on ZnSe windows when scanning with μFTIR. Finally, the μFTIR settings and nominal resolution caused significant differences in identifying MP size and mass estimate, which showed that the smaller the pixel size, the more accurately the particle boundary can be defined. These findings contributed to explaining disagreements between studies and addressed the importance of harmonization of methods.

Microplastics as contaminants in the Brazilian environment: an updated review

Microplastics have long been present in marine and terrestrial environments and have emerged in recent decades as a global environmental concern. This pollutant has been detected with increasing frequency in Brazilian territory and herein primarily highlights current information and developments about the quantity, distribution, techniques of identification, origins, and sources of microplastics and related pollutants in the Brazilian environment. We evaluated 79 publications from 2018 to December 2022, and some aspects can be highlighted: 27% of studies were published in the Journal Marine Pollution Bulletin; 22% of all studies were conducted in São Paulo city; and 52% of all microplastics found were collected from biota followed by sediment samples. According to the findings given here, microplastics in Brazilian habitats, which can reach concentrations of 4367 to 25,794 items m-2 in sediments, are becoming a serious problem in the Anthropocene age, and some topics regarding the open questions in this area were pointed out in this review.

Microplastic contamination in bathing areas in the Central Amazon, Itacoatiara, Brazil

Due to the visible abundance of plastic improperly disposed of in the environment, the number of investigations has increased worldwide in different water bodies and biota. Despite this, studies of contamination by microplastics in freshwater environments in the Amazon are scarce. This study investigated microplastic contamination in sediment samples of bathing areas in the Central Amazon, in Itacoatiara, Amazonas, Brazil. A total of 202 microplastic particles were recorded in the five investigated areas that are used for recreation. These results indicate no significant difference in the number of microplastic particles among the establishments; however, the size of the microplastic particles differed significantly between the establishments. Both blue and red microplastic particles were recorded, with blue particles being the most abundant. The microplastic particles were in the form of fibers and fragments. The number of microplastic particles was significantly different between the areas within and adjacent to the bathing areas, though the size of the microplastic particles was not significantly different in the areas within and adjacent to the bathing areas. There was no significant correlation in the establishments in regard to their frequency of use and contamination (number of microplastic particles). This is the first study that indicates the anthropogenic impacts associated with microplastic contamination in recreation areas within the Amazon Forest, an area considered by the world to be of vital importance for conservation. The results of this study indicate that microplastics are present in these bathing areas of the Central Amazon and that contamination in areas used for recreation may be significantly higher than in areas not used for this purpose.

Revealing microplastic dynamics: the impact of precipitation and depth in urban river ecosystems

Research on microplastics in Latin America is limited compared to a global perspective. Brazil plays a significant role in this context, as it possesses 12% of the world's freshwater reserves, constituting 53% of South America's water resources. There has been growing concern regarding the plastic pollution of the country's freshwater systems in recent years. Therefore, this study investigated the impact of plastic pollution on the Guaíba River, a significant watercourse in the southern region of Brazil that is subjected to high anthropogenic pressure. Additionally, we examined correlations between the presence of microplastics and key factors influencing their distribution in the river. Thus, freshwater was collected in seven sampling campaigns from 2019 to 2020, totaling 66 samples. The microplastics were quantified and characterized according to their color, shape, and polymeric composition. The concentration of microplastics varied between 2.9 and 53.8 items m-3, and the distribution and transport were positively influenced by the population density, precipitations, and depth of each sampling point. White-transparent color category (51%) and fragment shape (89%) were predominant among the found particles. Polyethylene (PE) and polypropylene (PP) represented 37% and 57% of the analyzed particles. The non-metric multidimensional scaling (nMDS) analysis indicated that similar contamination sources, such as domestic sewage, could influence three out of ten sampled points. Several microplastics presented the formation of cracks, with sizes smaller than 10 μm on their surface, which might indicate an erosion process, resulting in the formation of nanoplastics. The color fading observed in microplastics suggests that the particles were subjected to environmental stressors, leading to the leaching or degradation of the dye on the plastic. The results confirmed the ubiquity of microplastics in Guaíba River, highlighting the importance of improving the regulations on plastic waste disposal in the country to prevent the contamination of freshwater bodies.

How natural and anthropogenic factors should drive microplastic behavior and fate: The scenario of Brazilian urban freshwater

Brazil maintains its position at the top of the global ranking of plastic producers, yet recycling efforts have been incipient. Recent data reveals an annual production of approximately 14 million tons of plastic waste, not accounting for the surge in the usage of plastic masks and related materials due to the COVID-19 pandemic. However, what remains largely unreported is that over half of post-consumer plastic packaging in Brazil is managed without any monitoring, and it remains unclear how this will contribute to the occurrence of plastic waste and microplastics in Brazilian freshwaters. This scenario requires the consideration of several other crucial factors. Studies have been carried out mainly in marine and estuarine waters, while data on freshwaters are lacking. Brazil has continental dimensions and the highest water availability on the planet, yet the demand for water is greatest in regions with medium to low supply. Many densely populated Brazilian urban areas face chronic flood problems, possess inadequate levels of wastewater treatment, and display inadequate solid waste management practices. Consequently, urban freshwater with tropical characteristics in Brazil presents an intriguing scenario and is complementary to the most commonly studied marine environments. In this study, we explore the nuances of pollution in Brazilian urban freshwater and discuss how various parameters, such as organic matter, suspended solids, temperature, and pH, among others, influence the behavior of microplastics and their interactions with organic and inorganic contaminants. Furthermore, we address how microplastic conditions, such as biofouling, the type of plastic, or degradation level, may impact their behavior. By analyzing how these conditions change, we propose priority themes for investigating the occurrence of microplastics in Brazilian urban freshwater systems under different degrees of human impact. Ultimately, this study aims to establish a network dedicated to standardized monitoring of microplastic pollution in Brazilian urban freshwaters.

Distribution and abundance of microplastics in the water column of Vembanad Lake-A Ramsar site in Kerala, India

The study focuses on the occurrence, abundance and characteristics of microplastics (MPs) in the subsurface and bottom waters of Vembanad Lake, a Ramsar site in the state of Kerala. Even though several studies elucidate the prevalence of microplastic pollution in the surface waters of aquatic ecosystems, a little is known about the vertical distribution of MPs in the water column. Vembanad Lake water is greatly affected by microplastic pollution compared to other Indian lakes as it receive discharges from six rivers; a number of sewage canals and run-off. Ubiquitous distribution of MPs was found in the lake with a mean abundance of 26.79 ± 3.74 items L-1 and 52.70 ± 5.43 items L-1 in subsurface and bottom waters respectively. Fibers, constitute more than half of the total MPs in both subsurface and bottom waters. The dominance of polyamide and polypropylene with most of the MPs being fibers indicate that they originate probably from fishing activities and laundry wastewater. The particles with in the size range 100-500 μm were in excess in the water samples. Further fragmentation, increasing the number of MPs in the lake water was envisaged from the SEM images of MPs showing cracks and crevices. These MPs along with adsorbed contaminants upon ingestion by the aquatic organisms become a threat to the food web of the lake. The local population which depends mainly on the fishes and mussels of the lake for their dietary needs would be greatly affected by the contamination of the lake with MPs. Further research on MPs contamination in edible biota would give more insights on the extent and risks of MPs pollution in the lake.

Aging behavior of microplastics accelerated by mechanical fragmentation: alteration of intrinsic and extrinsic properties

Microplastics (MPs) inevitably undergo multiple aging processes during their life cycle in the environment. However, the information regarding the mechanical fragmentation behavior of MPs remained unclear, including the changes in the intrinsic properties of aged MPs, the measurement of aging degree, the underlying mechanism, and the interaction with heavy metals. Here, MPs (PS, PP, PET) were aged by crushing (-CR) and ball-milling (-BM) to simulate mild and severe mechanical fragmentation, respectively. Our results indicated that mechanical fragmentation significantly affected the morphology of MPs. The aging degree of MP-BM was deeper compared to MP-CR owing to smaller particle size, larger specific surface area, poorer heat resistance, better hydrophilicity, and richer oxygen-containing functional groups. The carbonyl index (CI) and O/C ratio were used to measure the aging degree of the two mechanical aging treatments. Besides, the mechanism was proposed and the discrepancy between the two treatments was elaborated from three aspects including the excitation energy source, reaction interface, and reaction dynamics. Furthermore, the extrinsic properties of MPs altered with the increase of aging degree; specifically, the adsorption capacities of heavy metals were enhanced. Meanwhile, it was unveiled that the CI value and O/C ratio played a vital role in estimating the adsorption ability of heavy metals. The findings not only reveal the mechanical fragmentation behavior of MPs but also provide new insights into the assessment of the potential risks of the aged MPs via chemical indexes.

Kıyı Lagün Sedimentlerinde Mikroplastiklerin Oluşumları ve Mekansal Dağılımları: Küçükçekmece Lagünü Örneği

Nehir, haliç ve lagünler, karasal ve deniz ekosistemleri arasında bağlantıyı sağlarken, tıpkı diğer kirleticilerde olduğu gibi sediment yapılarında da mikroplastik kirliliği hakkında kapsamlı bir profil ortaya koymaktadır. Bu çalışmada, Küçükçekmece Lagünü’nün üç farklı sucul alanından (deniz, kanal ve göl) alınan sediment örneklerinde mikroplastik bolluğu ve karakterizasyonunun belirlenmesi amaçlanmıştır. Bu kapsamda, lagünde belirlenen 5 istasyondan 12 aylık (Mart 2019 – Şubat 2020) sediment örnekleri alınmıştır. Mikroplastik ön işlemlerine tabi tutulan sediment örneklerinde, stereomikroskop ile mikroplastik bolluğu sayımı ve kategorizasyonu (boyut, tip ve renk) yapılmıştır. Ortalama mikroplastik bolluğu 2922,32±517,35 MP/kg olarak belirlenmiş olup, tespit edilen ortalama mikroplastik bolluğu değeri, ülkemizde daha önce yapılmış benzer çalışmalara kıyasla 2,4 kat daha yüksek bulunmuştur. Liflerin (%59) baskın mikroplastik tipi olduğu, baskın mikroplastik renginin siyah (%42) olduğu ve MP boyutlarının %50’sinin 1-100 μm arasında olduğu belirlenmiştir. Mevsimsel mikroplastik dağılımı irdelendiğinde ise, en yüksek bolluk değerlerinin yağışlı sezon olan kış aylarında olduğu tespit edilmiştir. Çalışma alanında en yüksek ortalama mikroplastik bolluğuna sahip L1 istasyonu, Küçükçekmece Lagünü Bağlantı Alanı temsil etmekte olup, lagündeki tüm antropojenik baskıların hissedildiği istasyon olarak ortaya çıkmaktadır. Bu çalışma, dünyanın diğer bölgelerindeki benzer sediment alanları için mikroplastik bolluğu ve dağılımı hakkında temsili veriler sağlamayı amaçlamaktadır.

Characterization of microplastics and its Pollution load index in freshwater Kumaraswamy Lake of Coimbatore, India

Microplastics are less than 5mm in diameter that enters the ecosystem through the breakdown of large plastic particles or climate and human activity. This study examined the geographical and seasonal distribution of microplastics in the surface water of Kumaraswamy Lake, Coimbatore. During seasons, including summer, pre-monsoon, monsoon, and post-monsoon, samples were collected from the lake's inlet, centre, and outlet. All sampling points contained linear low-density polyethylene, high-density polyethylene, polyethylene terephthalate, and polypropylene microplastics. Water samples contained fibre, thin, fragment, and film microplastics in black, pink, blue, white, transparent, and yellow colours. Lake's microplastic pollution load index was under 10, indicating risk I. Over four seasons, microplastic content was 8.77±0.27 particles per litre. The monsoon season had the highest microplastic concentration, followed by pre-monsoon, post-monsoon, and summer. These findings imply that the spatial and seasonal distribution of microplastics may be harmful to the fauna and flora of the lake.

Microplastics in caves: A new threat in the most famous geo-heritage in the world. Analysis and comparison of Italian show caves deposits

Microplastic pollution represent a worldwide concern, however, in karst areas is still largely unknown, especially in underground environments. Caves are the most important geological heritage worldwide, rich in speleothems, unique ecosystems custodians of important drinking water reserves, and a significant economic resource. Thank to their relatively stable environmental conditions, they can preserve information for a long time such as paleontological/archaeological remains, however, these characteristics make caves vulnerable environments too, easily damaged by climate variations and pollution. To increase the current knowledge of microplastic pollution, the deposits of different Italian show caves were investigated, improving the method for microplastic separation. Microplastic were identified and characterised using MUPL automated software, observed with and without UV light under a microscope, and verified under μFTIR-ATR, highlighting the importance of combine different methods. Microplastics were present in sediments of all examined caves, and were always greater along the tourist route (an average of 4300 items/kg) than the speleological areas (an average of 2570 items/kg). Microplastics less than 1 mm dominated the samples and the amount increased with the decrease in the size considered. Fibre-shaped dominated the samples and 74% particles was fluorescent under UV light. Analysed sediment samples contained especially polyesters and polyolefins. Our results highlight the presence of microplastic pollution in show caves, giving useful information to assess risks posed by microplastics in show caves and emphasizing the importance of pollutants monitoring in underground environments to define strategies for the conservation and management of caves and natural resources.

First report on microplastics contamination in a meteorite impact Crater Lake from India

Microplastic pollution is a worldwide concern affecting all environmental matrices, including pristine lakes. Lentic lakes operate as a sink for microplastics (MPs), which interfere with a biogeochemical cycle and, therefore, deserve immediate attention. We present a comprehensive assessment of MPs contamination in the sediment and surface water of a geo-heritage site, Lonar lake (India). It is the third largest natural saltwater lake and only basaltic crater in the world formed by meteoric impact around 52,000 years ago. Mean MPs abundance in lakeshore sediment and surface water was 14.44 particles/kg and 2.66 particles/L, respectively. Small-sized MPs dominate the hypersaline region of the lake. Transparent and green fragments and filaments morphotypes were abundant. Most of the MPs in Lonar lake were secondary in origin. FTIR-ATR analysis revealed 16 types of polymers in the lake, of which polypropylene, polyvinyl chloride, polyethylene, high-density polyethylene, low-density polyethylene, polystyrene, and polyester were the most common. The overall pollution load index (PLI) for Lonar lake sediment and water was 1.39 and 2.58, respectively. Although all sampling stations had significant MPs pollution (PLI > 1), there was noticeable station-specific variability, which could be linked to anthropogenic activities. Irresponsible tourist behavior and religious activities, coupled with poor waste management are the leading causes of MPs contamination in the lake. The current work fills a gap in the investigation of MP pollution in a crater lake formed by a meteorite impact by being the first to provide a precise estimate of the MPs contamination in the Lonar lake.

Monitoring of biofilm development and physico-chemical changes of floating microplastics at the air-water interface

Microplastics in the aquatic environment serve as a habitat for microbial life, on which they can form biofilms. However, how the development of the biofilm alters the properties of floating microplastics that are at the air-water interface and, therefore, not fully submerged, is not well understood. In this context, an aging experiment was conducted to monitor biofilm formation and changes in physico-chemical properties of low-density polyethylene (floating) microplastics over time. The growth of the biofilm followed the typical bacterial/biofilm growth phases and reached about 30% of the total mass of the microplastics, while the concentration of extracellular polymeric substances within the biofilm remained stable. Presence of chlorophyll a and urease activity indicated presence of photosynthetic microrganisms within the biofilm which was also confirmed by analysis of the biofilm composition. Chemical characterization by FTIR showed the formation of additional functional groups attributed to the formed biofilm, and SEM imaging showed cracks on the surface of the aged microplastics, indicating incipient degradation of the polyethylene. Moreover, the adsorption capacity of the aged particles for metals (Pb(II)) was 52% higher compared to the pristine ones. Aging increased the density and size of the particles; however, it did not lead to the submersion of the aged particles even after 12 weeks of aging, suggesting that additional environmental processes may influence the transport of microplastics from the air-water interface into the water body.

Research status and prospects of microplastic pollution in lakes

As an emerging pollutant, microplastics have attracted widespread concern around the world. Research on microplastics was first conducted in oceans, and in recent years, inland water, especially lakes, has gradually become a hot spot. This paper systematically reviews the sampling, separation, purification, and identification technologies used to assess microplastics in lakes and summarizes the occurrence of lake microplastics worldwide. The results show that microplastics are widespread in lake water and sediment. There are obvious geographical differences in the occurrence of microplastics. The abundance of microplastics in different lakes varies greatly. The forms are mostly fibrous and fragments, and the main polymers are polypropylene (PP) and polyethylene (PE). Previous papers have failed to comment in as much detail on the microplastic sampling techniques employed within lake systems. The sampling and analysis methods are critical to accurately evaluating contamination results. Due to the widespread presence of microplastics and the lack of uniform standards, there are various sampling methods. Trawls and grabs are most widely used in the sampling of lake water bodies and sediment, and sodium chloride and hydrogen peroxide are the most widely used media for flotation and digestion, respectively. In the future, it will be critical to establish unified standards for lake microplastic sampling and analysis technology, further explore the migration mechanism of microplastics in lake systems, and pay attention to the impact of microplastics on lake ecosystems.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

Past, present, and possible future policies on plastic use in the United States, particularly microplastics and nanoplastics: A review

As the levels of plastic use in global society have increased, it has become crucial to regulate plastics of all sizes including both microplastics (MPs) and nanoplastics (NPs). Here, the published literature on the current laws passed by the US Congress and regulations developed by various federal agencies such as the US Environmental Protection Agency and the US Food and Drug Administration (FDA) that could be used to regulate MPs and NPs have been reviewed and analyzed. Statutes such as the Clean Water Act, the Safe Drinking Water Act, the Toxic Substances Control Act (TSCA), the Resource Conservation and Recovery Act, and the Clean Air Act can all be used to address plastic pollution. These statutes have not been invoked for MP and NP waste in water or air. The Federal Food, Drug, and Cosmetic Act provides guidance on how the FDA should evaluate plastics use in food, food packaging, cosmetics, drug packaging, and medical devices. The FDA has recommended that acceptable levels of ingestible contaminant from recycled plastic are less than 1.5 µg/person/day, which is 476 000 times less than the possible ingested daily dose. Plastic regulation is present at the state level. States have banned plastic bags, and several cities have banned plastic straws. California is the only state beginning to focus on monitoring MPs in drinking water. The future of MP regulation in the USA should use TSCA to test the safety of plastics. The other statutes need to include MPs in their definitions. For the FDA, MPs should be redefined as contaminants-allowing tolerances to be set for MPs in food and beverages. Through minor changes in how MPs are classified, it is possible to begin to use the current statutes to understand and begin to minimize the possible effects of MPs on human health and the environment. Integr Environ Assess Manag 2023;19:474-488. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Microplastic contamination in the freshwater shrimp Macrobrachium amazonicum in Itacoatiara, Amazonas, Brazil

The present study analyzed the presence of microplastics (MPs) in the shrimp Macrobrachium amazonicum, which is an economically important food that is consumed in several regions of the Brazilian Amazon. A total of 600 specimens of M. amazonicum were captured at two sampling sites (urban and rural area). A total of 2597 MP particles were recorded in the shrimps, with a significant difference between the two sites. The presence of MPs in the body parts also differed significantly. No significant difference was found between MPs abundance and sex of the shrimps. The size of the MPs did not differ significantly between the collection sites and between the body parts. Dark blue fiber-type MPs were the most abundant. A positive correlation was observed between the abundance of MPs and the total weight of shrimps. Raman spectroscopy identified the dark blue fibers as polypropylene and the FTIR technique identified the light blue fragments as nylon. The results indicate that the presence of MPs in the M. amazonicum shrimp is associated with the capture sites near the urban area and is present in the diet of the Amazonian population that regularly consumes this crustacean in traditional dishes.

Microplastics in urban freshwater streams in Adelaide, Australia: A source of plastic pollution in the Gulf St Vincent

The pollution of marine environments from plastic waste is anticipated to increase with current increases in plastic production. Reciprocally, escalating research efforts provide an improved understanding, monitoring, awareness, and mitigation of plastic contamination. Freshwater streams are recognised as one of the main contributors of microplastic pollution in marine environments. Presented here is the first investigation on the abundance of microplastic contamination (>20 μm and <5 mm) in freshwater streams in Adelaide, Australia. Composite samples were obtained from the sub-surface waters of eight freshwater streams (Magazine Wetland, Torrens River, Brownhill Creek, Sturt River, Field River, Christie Creek, Onkaparinga River and Pedler Creek), just before their connection to the Gulf St Vincent. Microplastics were found in all samples and microplastic abundance was 6.4 ± 5.5 particles.L^-1 across all streams, with significant variations. Microplastic abundances found in the freshwater streams of Adelaide were comparatively higher than those found in areas of similar urbanisation, likely due to the varying methodologies used across studies. This work provides evidence, for the first time, of the prevalence of microplastic contamination in the sub-surface waters of eight freshwater streams in metropolitan Adelaide. These findings reinforce the need for long-term and on-going monitoring of freshwater streams for plastic contamination. Furthermore, spatial and temporal monitoring will allow for the identification in changes to the abundances of microplastics discharging from these sources into the Gulf St Vincent and observe if abundances increase or decrease with any future targeted waste management efforts.

Occurrence and distribution of per-and polyfluoroalkyl substances (PFAS) in surface and groundwaters in an urbanized and agricultural area, Southern Brazil

Per- and polyfluoroalkyl substances, known as PFAS, are emerging contaminants detected in surface water, groundwater, drinking water, air, and food. Due to its chemical stability and high hydrophobicity, these compounds are used as surfactants, surface protectors, flame retardants, textile impregnation, fire-fighting foam, and pesticides and may be a risk for human health in the long-term exposure. Currently, a little research has been carried out for these compounds in Brazil. In this study, the concentration and distribution of 23 PFAS were analyzed in groundwater samples collected from water wells in urbanized areas and in surface water samples from Porto Alegre, one of the biggest cities in Brazil. The total concentrations of PFAS (ΣPFAS) in a groundwater sample varied between 22 and 718 ng L^-1. Eleven PFAS species were detected in groundwater, including PFOA, PFHxA, PFPeA, PFBA, PFDA, PFNA, and PFOS. Most of PFAS were quantified in samples located in the aquifer formed by medium to coarse sands intercalated with silty-sandy lenses and low organic matter content that could facilitate the percolation of these compounds. The total concentrations of PFAS (ΣPFAS) in a surface water sample varied between 11 and 17 ng L^-1. Ten species were founded in surface water being PFOA, PFOS, and PFHpA the most dominant. Considering all the samples, PFOA was the predominant species in the study. In addition, tributary water bodies had higher concentrations of PFAS than the main water body (Guaiba Lake) probably due dilution process.

Plastics and waterbirds in Brazil: A review of ingestion, nest materials and entanglement reveals substantial knowledge gaps and opportunities for research

Plastic pollution is an increasing global problem, especially in aquatic environments. From invertebrates to vertebrates, many aquatic species have been affected by plastic pollution worldwide. Waterbirds also interact with plastics, mainly by ingesting them or using them as nest material. Brazil has one of the largest aquatic environment areas, including the most extensive wetland (the Pantanal) and biggest river (the Amazon), and a ∼7500 km long coastline, which hosts a remarkable waterbird diversity with more than 200 species from 28 bird families. Here, we synthesise published and grey literature to assess where, how, and which waterbirds (marine and continental) interact with plastics in Brazil. We found 96 documents reporting interaction between waterbirds and plastics. Only 32% of the occurring species in the country had at least one individual analysed. Plastic ingestion was reported in 67% of the studies, and seabirds were the study subject in 79% of them. We found no reports in continental aquatic environments, unveiling entire regions without any information regarding interactions. Consequently, this geographic bias drew a considerable taxonomic bias, with whole families and orders without information. Additionally, most studies did not aim to search for plastic interactions, which had a twofold effect. First, studies did not report their findings using the proposed standard metrics, hampering thus advances in understanding trends or defining robust baselines. Second, as it was not their main objective, plastics were not mentioned in titles, abstracts, and keywords, making it difficult to find these studies. We propose means for achieving a better understanding of waterbird-plastic interactions in space and time, and recommend searching for sentinel species and for allocating research grants.

Comprehensive analysis of spatial distribution of microplastics in Rawal Lake, Pakistan using trawl net and sieve sampling methods

Occurrence of microplastics (MPs) in freshwater environments, particularly reservoir and lakes, is an emerging concern. There are limited studies in Pakistan on microplastic pollution in the lacustrine environments and those that exist do not provide sufficient information on the spatial distribution of MPs in offshore surface water. The aims of this study were to determine microplastic abundance in Rawal Lake, Pakistan and to ascertain if sampling methodology influences microplastic counts. Surface water samples were collected from 10 sites; 5 tributaries, 2 human settlement and 3 fishing and boating areas using two different sampling techniques: 100 μm mesh trawl and 20 L sample through a 45 μm mesh sieve. A significant difference was observed in the abundance of MPs across two methods with the sieve method yielding 2.8 ± 1.44 particles/L and trawl yielding 0.025 ± 0.024 particles/L. Tributaries and boating/fishing area had higher microplastic abundance than the residential area regardless of sampling method. Filaments were the dominant shape of MPs in both type of samples followed by fragments in trawl samples and films in sieved samples. Microbeads were only detected in trawl samples. MPs within size range 0.1-0.9 mm were mostly fragments (82%). MPs were diverse in colors with white/transparent and black MPs common. Polypropylene was the main type of microplastic in Rawal Lake (40-74%). Scanning Electron Microscopy (SEM) of MPs showed cracks, roughness and striations on the particles. Energy Dispersive Spectroscopy (EDS) detected heavy metals (Fe, Cu, Ni, Pb, Zn, Co and Cr) in MPs. Findings suggest that microplastic pollution in Rawal Lake may pose great risk to aquatic and human life through leaching of inherent/adsorbed heavy metals and therefore requires future investigation.

Effects of ionic strength and particle size on transport of microplastic and humic acid in porous media

As an emerging pollutant, the transport behavior of colloidal microplastic particles (CMPs) in saturated porous media may be affected by the simultaneous presence of other substances in the natural environment. In this study, colloidal polystyrene microplastic particles (PSMPs) were selected as the representative of CMPs to investigate the cotransport behaviors of CMPs in the presence of humic acid (HA) under varied environmental conditions (ionic strength: 1, 100 mM KCl; HA concentration: 0, 5, 10, 20 mg⋅L^-1) in porous media. The presence of HA with different concentrations was found to increase the mobility of 1.0-μm and 0.2-μm CMPs in porous media in a non-linear and non-monotonic manner. Furthermore, the HA-facilitated transport of CMPs occurred under both electrostatically unfavorable and favorable attachment conditions (limited to the conditions examined in this study, corresponding to 1 and 100 mM KCl, respectively). The transport behavior of the smaller-sized CMPs (0.2-μm CMPs) was more sensitive to the change of ionic strength and the presence of HA than that of the larger-sized CMPs (1.0-μm CMPs). The cotransport process of CMPs and HA was affected by many factors. Modeling results showed that a small amount of competitive blocking occurred during the cotransport process. Moreover, both the presence of HA and change in ionic strength could affect the surface properties of CMPs. Thus, the cotransport behavior of CMPs with HA was different from the transport of individual CMPs in porous media. Experimental results revealed that HA induced complexity in the transport behavior of CMPs in the aqueous environment. Therefore, undeniably, a lot more systematic explorations are further demanded to better comprehend the CMPs cotransport mechanism in the presence of other substances.

Microplastics in ASEAN region countries: A review on current status and perspectives

A literature assessment was conducted to determine the current state of microplastics research in ASEAN countries focusing on 1) microplastics in water, sediment, and water organisms; 2) microplastics' sources and dispersion; and 3) microplastics' environmental consequences, including human toxicity. ASEAN countries contributed only about 5 % of the global scholarly papers on microplastics, with Indonesia contributing the most followed by Malaysia and Thailand. The lack of standard harmonized sampling and processing methodologies made comparisons between research difficult. ASEAN contributes the most to plastic trash ending up in the ocean, indicating a need for more work in this region to prevent plastic pollution. Microplastics are found in every environmental compartment; however, their distribution and environmental consequences have not been sufficiently investigated. There are very few studies on microplastics in the human blood system as well as respiratory organs like the lungs, indicating that more research is needed.

First assessment of microplastic and artificial microfiber contamination in surface waters of the Amazon Continental Shelf

The composition and distribution of microplastics (MPs) in the Brazilian Amazon Continental Shelf surface waters are described for the first time. The study was conducted during the 2018 rainy and dry seasons, using 57 water samples collected with aluminum buckets and filtered through a 64-μm mesh. The samples were vacuum-filtered in a still-air box, and the content of each filter was measured, counted, and classified. A total of 12,288 floating MPs were retrieved; particles were present at all 57 sampling points. The mean MP abundance was 3593 ± 2264 items·m^-3, with significantly higher values during the rainy season (1500 to 12,967; 4772 ± 2761 items·m^-3) than in the dry season (323 to 5733; 2672 ± 1167 items·m^-3). Polyamides (PA), polyurethane (PU), and acrylonitrile butadiene styrene (ABS) were the most common polymers identified through Fourier Transform Infrared Spectroscopy (FTIR) analysis. Cellulose-based textile fibers were also abundant (~40%). Our results indicate that the Amazon Continental Shelf is contaminated with moderate to high levels of MPs; the highest abundances were recorded at stations near land-based sources such as river mouths and large coastal cities.

Tracking the microplastic accumulation from past to present in the freshwater ecosystems: A case study in Susurluk Basin, Turkey

Microplastic pollution in aquatic ecosystems has become a global issue in recent years due to its presence everywhere around the world. Although several studies have explored the impact of the accumulation of those small particles in marine environments, comparisons of freshwater systems with marine environments are scarce. In the current study, due to the lack of long-term data on microplastic pollution, we used paleolimnological approaches to acquire the missing information regarding this hot topic. Two short cores were taken from Bursa province in Turkey, which is the center of industrial and agricultural production with many different sectors such as textile and manufacturing. The first core sample was taken from a relatively pristine environment, Lake Uluabat, and the second one was taken from a delta area where all the discharge coming from the basin flowed through to the Marmara Sea. The sediment core from the lake was dated back to the 1960's and the majority of the sample was dominated by fibers. Despite there being no uniform distribution pattern, the number of the microplastics showed decreasing trend after the lake became a Ramsar site. Due to the continuous mixing in the sampling area, there were obstacles via the dating of the Delta core. Nevertheless, the data showed that a high number and variety of microplastics have accumulated over the last decade in the province. This can be interpreted as microplastic pollution reaching the sea directly from the basin. These findings revealed that a plastic chronostratigraphy would give important temporal data regarding the microplastic accumulation in aquatic ecosystems.

Distribution of microplastics in benthic sediments of Qinghai Lake on the Tibetan Plateau, China

Although several studies of microplastics (MPs) with size <5 mm in lake sediments focused on lakeshore areas, there have been no studies of distributions of MPs from lakeshores to the center of a lake. To test our hypothesis that MPs decrease from lakeshore to the center, a study was conducted on the largest brackish lake on the remote and high-altitude Tibetan Plateau, China. Abundances and characteristics of MPs in 14 samples of surface sediment collected from a river bay, a lake bay, and a lake central area were investigated. Distributions were influenced by river inflow, tourism, and minimal activity of humans, respectively around Qinghai Lake. The mean abundance of MPs in sediments of Qinghai Lake was 393 ± 457 items/kg, dry mass (dm). Based on the range of MP abundances in surface sediments of lakes worldwide, Qinghai Lake was classified as being moderately polluted with MPs. The dominant color, shape, size, and polymer type of MPs in sediments were transparent, fiber, 0.05-1 mm, and polypropylene, respectively. The river bay had a mean abundance of MPs two-fold greater than either the bay or central area of the lake. This indicates that the river catchment caused more pollution with MPs, while the central area of the lake was not a sink for MPs. Spatial trends of MPs in sediments from the shore to the center of the lake differed among areas, and were significantly related to wind, lake current, sedimentation rate, water- and sediment-properties, water depth, and proximity to land sources of MPs.

Spatial and temporal variations of microplastic concentrations in Portland's freshwater ecosystems

While microplastics are a pollutant of growing concern in various environmental compartments, less is known regarding the sources and delivery pathways of microplastics in urban rivers. We investigated the relationship between microplastic concentrations and various spatiotemporal factors (e.g., land use, arterial road length, water velocity, precipitation) in two watersheds along an urban-rural gradient in the Portland metropolitan area. Samples were collected in August, September, and February and were analyzed for total microplastic count and type. Nonparametric statistics were used to evaluate potential relationships with the explanatory variables, derived at both the subwatershed and near stream scales. In August, microplastic concentrations were significantly higher than in February. August concentrations also negatively correlated with flow rate, suggesting that lower flow rates may have facilitated the accumulation of microplastics. Smaller size microplastic particles (< 100 μm) were found more in August than September and February, while larger size particles were more dominant in February than the other months. Microplastic concentrations were positively related to 24-h antecedent precipitation in February. Negative correlations existed between wet season microplastic concentrations and agricultural lands at the near stream level. The results indicate that near stream variables may more strongly influence the presence and abundance of microplastics in Portland's waterways than subwatershed-scale variables. Fragments were the most commonly observed microplastic morphology, with a dominance of gray particles and the polymer polyethylene. The findings of this study can inform management decisions regarding microplastic waste and identify hotspots of microplastic pollution that may benefit from remediation.

Microplastic pollution in urban green-belt soil in Shihezi City, China

The problems are associated with microplastic (MP) pollution of global concern. However, little is known about the pollution characteristics and sources of MPs in urban green-belt soils. Therefore, this study investigated MP pollution in 11 sampling sites (22 green belts) in Shihezi City. The results showed that the abundance of MPs (0.02-5.00 mm) ranged from 287 ± 100 items/kg dw to 3227 ± 155 items/kg dw (mean + SD). Fibers (69.9%) accounted for the majority of MPs, and the MPs were mainly black (36.7%) and 0.02-0.5 mm (64.8%). The main types of MPs were polystyrene (PS) and polyethylene (PE). Compared with agricultural soil, the color and composition of green-belt soil MPs are diverse, which means that the source of green-belt soil MPs is more diverse. In different types of green-belt soil, MP pollution of industrial green land is more serious. Through cluster analysis and spatial distribution, fragments and fibers were found to have similar sources, mainly originating from food and textile industrial activities. This study provides important information for revealing MP pollutions in urban green-belt soils.

Long-term interactions between microplastics and floating macrophyte Lemna minor: The potential for phytoremediation of microplastics in the aquatic environment

The presence of microplastics (MPs) in the environment has raised many concerns, and therefore approaches and technologies to remove them in situ are of high interest. In this context, we investigated the interactions between polyethylene MPs (fragments with a mean size of 149 ± 75 μm) and an aquatic floating macrophyte Lemna minor in order to assess its potential use for in situ phytoremediation. We first investigated the long-term effects of a high (100 mg/L = 9600 MPs/L), but still environmentally relevant concentration of MPs on L. minor. Subsequently bioadhesion of MPs was studied and the number and strength of MPs adhering to plant biomass were assessed. MPs did not adversely affect various parameters of plants (e.g., specific growth rate, chlorophyll contents, total antioxidant capacity, electron transport system activity, and contents of energy-rich molecules) throughout the duration of the experiment (12 weeks), except for the first week of the experiment, when protein content and total antioxidant capacity were affected. On the other hand, MPs affected the root length of L. minor during the first eight weeks of the experiment, while further exposure resulted in a decrease in the effects, indicating the ability of L. minor to tolerate the presence of MPs for a long period of time. MPs adhered rapidly to the plant biomass and the average percentages of strongly and weakly adhered particles were 6.5% and 20.0%, respectively, of the total MPs applied. In summary, results of this study suggest that L. minor can tolerate hotspot concentrations of MPs and can collect MPs from the water surface. Therefore, phytoremediation using floating plants could be considered as a potential method for in situ removal of MPs from the aquatic environment.

Groundwater antibiotics and microplastics in a drinking-water source area, northern China: Occurrence, spatial distribution, risk assessment, and correlation

In recent years, antibiotics and microplastics have both received increasing attention. However, the contamination and correlation between the two pollutants in the groundwater of drinking-water source areas has not yet been considered. In this study, eight antibiotics were detected in 81 groundwater samples from a drinking-water source area. These were trimethoprim (TMP), sulfadimidine (SDD), sulfadiazine (SDZ), sulfamethoxazole (SMX), sulfachloropyridazine (SCP), norfloxacin (NOR), ciprofloxacin (CIP) and enrofloxacin (ENRO). Detection rates ranged from 1.23% to 95.06% and the maximum concentration ranged from 0.44 ng/L to 45.40 ng/L. Antibiotics in the groundwater pose no threat to human health, while only ENRO, CIP, NOR, SMX, and SDZ posed medium to low risks to the aquatic ecosystem. In contrast, the detection rate of microplastics was 100% with abundance values ranging from 4 n/L to 72 n/L, with an average of 29 n/L. Microplastic polymers were identified as polyamide, polyethylene, polypropylene, polyvinyl chloride and polystyrene. These also occurred in surface water but the particle sizes in groundwater were lower than those in the surface water. Through correlation analysis, it was found that NOR, ENRO and total antibiotic concentrations were significantly correlated with microplastic abundances. This study revealed the contamination and potential risks of antibiotics and microplastics in the groundwater of a drinking-water source area and found a correlation between them, indicating that risk management of antibiotics and microplastics in groundwater should be highly concerned.

Unraveling the occurrence of contaminants of emerging concern in groundwater from urban setting: A combined multidisciplinary approach and self-organizing maps

In recent decades, changes in human behavior and new technologies have introduced thousands of new compounds into the environment called "contaminants of emerging concern" (CEC). These compounds have been detected in different environmental compartments such as soil, surface water, air, and groundwater. The presence of these contaminants in groundwater may pose risks to human health when used as potable water. In some urban areas in Brazil, groundwater is normally consumed without previous treatment. This study aimed to use statistical analysis by self-organizing maps (SOM) to evaluate the trends of CEC in urban groundwater systems. A total of 23 CEC compounds including pesticides, pharmaceuticals, and hormones were determined in groundwater samples using solid phase extraction and liquid chromatography-mass spectrometry. The CEC most frequently detected were atrazine and degradation products, fipronil, simazine, tebuconazole, hexazinone, and caffeine in concentrations up to 300 ng L^-1. All studied compounds were detected in groundwater at least in one sample. Patterns in the data through SOM have shown a strong positive correlation between atrazine, hexazinone, simazine, tebuthiuron, 2-hydroxyatrazine, and 17β-estradiol. The hormones estrone and testosterone also show a positive correlation due to their similar chemical properties. On the other hand, caffeine was detected in 90% of the samples, likely due to a population habit of taking daily a hot drink made of yerba mate associated with low rates of treated domestic sewage in the study area.

Experimental evaluation of microplastic consumption by using a size-fractionation approach in the planktonic communities

The increasing amount of plastic particles introduced into continental aquatic environments has drawn the attention of researchers around the globe. These particles can be assimilated by a wide range of aquatic organisms, from microorganisms to fish, causing detrimental effects on trophic webs. Using an experimental approach, we investigated the effect of microplastic particles of different sizes on the planktonic trophic chain by sampling natural plankton communities from a lake located in the Upper Paraná River floodplain, Brazil. Zooplankton samples were collected at the beginning of the experiment and after 36 h of incubation. Microplastic particles (MP) samples were taken every 12 h. The effect of MP particle consumption from the control and treatment groups indicates significant effects by all plankton size fractions (p < 0.05). We demonstrated that the presence of MP particles can significantly affect the trophic web, furthermore, we detected the effect of higher consumption effect of smaller size MP particles. This study suggest that the largest MP consumption effects come from the lower trophic levels of the trophic chain, such as protists. The competitive effect of large predators is a crucial factor in controlling the abundance of populations, and although they did not directly consume MP particles, they ingest them indirectly through prey capable of absorbing these compounds in the environment. Our findings warn that MP particles enter the food webs of tropical regions when exposed to these pollutants, and that the presence of these particles should not be neglected when studying freshwater ecosystems.