Can incineration completely eliminate plastic wastes? An investigation of microplastics and heavy metals in the bottom ash and fly ash from an incineration plant

A review of methods for mitigating microplastic contamination in biosolids from wastewater treatment plants before agricultural soil application

Wastewater treatment plants (WWTP) are recognized as major sources of microplastic (MP) particles in terrestrial environments, particularly in agricultural soils through biosolids application. While many reviews have focused on the distribution, detection, and mitigation of MPs in wastewater effluent to limit their discharge into oceans, our understanding of methods to mitigate biosolid contamination remains limited. This review focuses on methods for mitigating MPs contamination in biosolids at various intervention points, including sources, WWTP including the primary and secondary treatment stages where sludge is generated, and post-contamination. These methods are categorized as physical, physicochemical, and biological approaches, and their advantages and limitations are discussed. For instance, physicochemical methods, especially froth flotation, are cost-effective but are hindered by contaminants and reagents. Physical methods like microfibre filtration devices (MFD) are safe but their efficiency depends on the filter pore size and design. Biological methods, particularly microbial degradation, are limited by the varying efficiencies of microorganisms in breaking down MPs and the extended time required for their effective degradation. Other physical methods including dissolved air flotation, and ultrasonication already exist in WWTPs but may require retrofitting or optimization to enhance MP removal from biosolids. As each method inherently has limitations, the key to achieving MP-free biosolids, and thus preventing their release into agricultural soil, lies in integrating these methods through multi-coupling strategies.

The missing link: A systematic review of microplastics and its neglected role in life-cycle assessment

The issue of plastic pollution has been exacerbated by the discovery of small plastic particles known as "microplastic". While the harmful effects of microplastics are becoming increasingly apparent, life-cycle assessment (LCA), as a holistic environmental assessment tool, has yet to offer a solution that can quantitatively capture the impacts associated with microplastics. In this paper, we conducted a systematic literature review to investigate how existing LCA studies quantify the environmental and human health effects of microplastics. A detailed analysis of 187 studies revealed that microplastics are rarely quantified, or even qualitatively discussed, in most LCAs. Thus, the true impacts of plastic products may be underrepresented and underestimated, leading to biased decision-making. We believe that this status quo is attributable to four fundamental issues, including (i) lack of microplastic leakage data; (ii) lack of quantitative cause-effect relationships between microplastic concentration and their impacts; (iii) exclusion of the "use" phase from the scope of analysis; and (iv) exclusion of long-term effects from landfilled plastic waste. These findings highlight the need for greater efforts and investment in microplastic research and data collection. To address the current knowledge gap, this article presents practical recommendations on how microplastics can be incorporated into the LCA framework, based on latest research.

Microplastics in the urban water cycle: A critical analysis of issues and of possible (needed?) solutions

Microplastic (MP) contamination is a problem that affects even remote, scarcely populated regions of the world. This topic has recently been the subject of many published studies, however, these often adopt hyperbolic statements and do not actually provide definitive evidence that MPs are a cause of environmental risk in actual environmental conditions. New technologies to remove MPs from supply and waste water are being investigated, but they are able to intercept a minimal fraction of the MPs circulating in all environmental media. Recently, several pieces of legislation were introduced to reduce plastic production, use, and disposal, but it is not clear how such measures could achieve a significant environmental MP reduction. This paper addresses the MP issue within the urban water cycle, examining recent current literature on MP presence in drinking and waste water, and overviewing available recent treatment technologies for their removal. The ensuing discussion attempts to holistically assess the actual relevance of the issue in the light of the current scientific evidence.

Degradation of Decabromodiphenyl Ether Dispersed in Poly (Acrylo-Butadiene-Styrene) Using a Rotatory Laboratory Pilot Under UV-Visible Irradiation

The growing volume of plastics derived from electronic waste (e-waste) underscores the imperative for environmentally sustainable strategies for the management of this waste. In light of the paramount importance of this issue, a pilot demonstrator for the decontamination of polymers containing Brominated Flame Retardants (BFRs) has been developed. The objective is to investigate the potential for decontaminating BFR-containing polymers from e-waste via UV-visible irradiation using a rotatory laboratory pilot operating under primary vacuum conditions. This report focuses on binary model blends composed of 90 weight% (wt%) poly(Acrylo-Butadiene-Styrene) (ABS) pellets and 10 wt% Deca-Bromo-Diphenyl Ether (DBDE), which is one of the most toxic BFRs. The efficiency of the irradiation process was evaluated as a function of pellet diameter and irradiation time using Fourier Transform InfraRed spectroscopy (FTIR) and High-Resolution Laser Desorption/Ionization Mass Spectroscopy (HR-LDI-MS). As a consequence, ABS + DBDE achieved a decontamination efficiency of 97% when irradiated with pellets of less than 1 mm in diameter for a period of 4 h. Additionally, the thermal behavior of the irradiated samples was investigated through thermogravimetric analysis and differential scanning calorimetry. It was thus established that the application of UV-visible irradiation had no significant impact on the overall thermal properties of ABS.

Impact of microplastics on strength parameters of clayey, Sandy, silty soil: A comparative assessment

The comparative assessment of a variety of microplastic contamination on various soil types hasn't been extensively explored in existing literature. The present study focuses on the comparative analysis of the impact of environmentally relevant concentrations of LDPE, HDPE, and PVC microplastic contamination (2 %, 4 %, and 6 %) on index properties and strength parameters of sandy, silty and clayey soil types at varying observation days 5,10,15,20,25, and 30 days. Extensive experimental investigations are carried out to understand the effect of contamination on moisture content, specific gravity, liquid limit, plastic limit, plasticity index, optimum moisture content, maximum dry density, and shear strength parameters of the respective soil type. It is observed that the depletion in Atterberg's limits is found more in the case of clayey soil as compared to silty soil because clayey soils consist of large specific surface areas leading to van der Waals force of attraction being the predominant force between particles, compared with silty soil which is affected by microplastic addition leading to decrease in net attractive forces. In the case of clayey soil maximum depletion of liquid limit up to 168 %, plastic limit up to 33 %, plasticity index (136 %), and optimum moisture content (9.04 %) is observed for PVC microplastic. The deduction in maximum dry density values is observed more for sandy soil (0.59 g/cc) followed by silty soil (0.21 g/cc) and clayey soil (0.12 g/cc). The maximum depletion of moisture content(delta-8 %), shear strength (delta-0.89 kg/cm2), and maximum dry density (delta-0.44 g/cc) is observed in the case of sandy soil for PVC and LDPE microplastic contamination. Significant depletion in optimum moisture content is observed in the case of clayey soil (9.57 %) compared to sandy (5.62 %) and silty soil (5.3 %). An increase in cohesion is observed for sandy soil (0.09 kg/cm2) and a decrease for clayey (0.19 kg/cm2) and silty soil (0.19 kg/cm2). The angle of internal friction is reduced in the case of clayey soil (∆-14.380) followed by silty soil (∆-11.230) and sandy soil (∆-11.020). For silty soil maximum depletion of specific gravity(delta-1.06) and cohesion (0.192 kg/cm2) is observed for LDPE and HDPE microplastic. The sandy soil type is most affected due to microplastic contamination irrespective of the type of microplastic contamination followed by clayey soil and the silty soil type is least affected. The maximum overall shear strength is reduced due to microplastic contamination in all the soil types.

Unveiling the ecotoxicological impact of microplastics on organisms - the persistent organic pollutant (POP): A comprehensive review

Microplastics have been ubiquitous in our environment for decades, and numerous studies have revealed their extensive dispersion, reaching far beyond the surface of the land, soil, aquatic ecosystems. They have infiltrated the food-chain, the food web, even the air we breathe, as well as the water we drink. Microplastics have been detected in the food we consume, acting as vectors for hazardous chemicals that adhere to their hydrophobic surfaces. This can result in the transfer of these chemicals to the aquatic life, posing a threat to their well-being. The release of microplastics into different environmental settings can give rise to various eco-toxicological implications. The substantial body of literature has led scientists to the consensus that microplastic pollution is a global problem with the potential to impact virtually any type of ecosystem. This paper aims to discuss crucial information regarding the occurrence, accumulation, and ecological effects of microplastics on organisms. It also highlights the new and emerging disease named "Plasticosis" that is directly linked to microplastics and its toxicological effects like permanent scarring and long-term inflammation in the digestive system of the seabirds. By comprehending the behaviour of these microplastic pollutants in diverse habitats and evaluating their ecological consequences, it becomes possible to facilitate a better understanding of this toxicological issue.

Characteristics and release potential of microplastics in municipal solid waste incineration bottom ash

Incineration is an effective method for reducing and safely treating municipal solid waste. However, microplastics (MPs) inevitably remain in the bottom ash, potentially introducing new pollution risks during subsequent treatment processes. This study conducted an analysis of the accumulation and release potential of MPs in bottom ash samples collected from 4 municipal solid waste incineration plants in Zhejiang, China. The results showed that the abundance of MPs ranged from 20 to 118 items g-1. Remarkably, MPs were found to accumulate predominantly in smaller bottom ash particles below 4.75 mm accounted for up to 70% of the total MPs. Most MPs in the bottom ash were under 100 μm in size, with a majority exceeding 50% being less than 50 μm, typically manifesting as shafts and fibers. In scenarios of secondary crushing, the abundance of MPs increased gradually with the degree of bottom ash crushing. When bottom ash was crushed to a particle size of less than 0.6 mm, the abundance of MPs reached up to 87-901 items g-1, which is 5-10 times higher than the original bottom ash. It is estimated that the annual release of MPs may reach up to 4.05 × 1016 particles. Re-incinerating thoroughly crushed bottom ash at 600 °C successfully decomposed the MPs. Mechanical stress can significantly increase the risk of MPs releasing in bottom ash. This risk can be eliminated by using secondary incineration to achieve complete MPs decomposition.

Microplastics in different municipal solid waste treatment and disposal systems: Do they pose environmental risks?

Microplastic (MP) pollution is a significant worldwide environmental and health challenge. Municipal solid waste (MSW) can be an important source of MPs in the environment if treated and disposed of inappropriately, causing potential ecological risks. MSW treatment and disposal methods have been gradually shifting from landfilling/dumping to more sustainable approaches, such as incineration or composting. However, previous studies on MP characteristics in different MSW treatment and disposal systems have mainly focused either on landfills/dumpsites or composts. The lack of knowledge of multiple MSW treatment and disposal systems makes it difficult to ensure effective MP pollution control during MSW treatment and disposal. Therefore, this study systematically summarizes the occurrence of MPs in different MSW treatment and disposal systems (landfill/dumpsite, compost, and incineration) on the Eurasian scale, and discusses the factors that influence MPs in individual MSW treatment and disposal systems. In addition, the paper assesses the occurrence of MPs in the surrounding environment of MSW treatment and disposal systems and their ecological risks using the species sensitivity distribution approach. The study also highlights recommendations for future research, to more comprehensively describe the occurrence and fate of MPs during MSW treatment and disposal processes, and to develop appropriate pollution control measures to minimize MP pollution.

Influencing factors of microplastic generation and microplastic contamination in urban freshwater

This research analyzes data on the microplastic (MP) contamination in the environmental systems (atmosphere, lithosphere, hydrosphere) and the levels of MPs in freshwater of cities with different levels of national income. This study investigates the influencing factors of MP generation, i.e., mismanaged plastic waste, untreated wastewater, number of registered motor vehicles, and stormwater runoff. The statistical correlations between the MP contamination in urban freshwater and the four influencing factors of MP generation are determined by linear regression. The results indicate that MPs are most abundant in aquatic systems (i.e., hydrosphere) and pose a serious threat to the human food chain. The regression analysis shows a strong correlation between mismanaged plastic waste and microfragment smaller than 300 μm in particle size in urban freshwater with high goodness-of-fit (R2 = 0.8091). A strong relationship with high goodness-of-fit also exists between untreated wastewater and microfragment of 1000-5000 μm in particle size (R2 = 0.9522). The key to mitigate the MP contamination in urban freshwater is to replace improper plastic waste management and wastewater treatment with proper management practices.

Parameters optimization for decontamination and fine physical regeneration pathways of polypropylene plastics from waste lunchboxes

Due to the development of the food delivery industry, a large amount of waste lunchboxes made of homo polypropylene (PP) plastic have been generated. This study developed a new technological strategy to effectively regenerate PP from waste lunchboxes. Through response surface curve analysis, it was found that under the optimal process conditions of hot alkali washing at 80 ℃, 30 min, and pH 13, the optimal contact angle was 65.55°, indicating a good oil stain removal effect. By identifying and analyzing the characteristics of impurities in waste lunchboxes, a physical sorting and granulation regeneration process was constructed. And through large-scale statistical analysis and data collection, it was further verified that recycled PP plastics maintained their physical stability and excellent processing performance. The quality stability of recycled PP plastics in terms of impurities content was also verified. By designing different formulations specifically, recycled PP was mixed with different virgin PP and antioxidants in appropriate proportions, and extruded into particles under 150-300 mesh filtration conditions to obtain modified recycled PP. Modified recycled PP was applied in textiles, clothing, and injection molded products. In conclusion, we achieve the up-cylcing of waste PP lunchboxes instead of down-cylcing.

Potential health risks of microplastic fibres release from disposable surgical masks: Impact of repeated wearing and handling

Disposable surgical masks undeniably provide important personal protection in daily life, but the potential health risks by the release of microplastic fibres from masks should command greater attention. In this study, we conducted a microplastic fibre release simulation experiment by carrying masks in a pocket and reusing them, to reveal the number and morphological changes of microfibres released. Fourier transform infrared spectrometry, scanning electron microscopy, and optical microscopy were employed to analyse the physical and chemical characteristics of the mask fibres. The results indicated that the reuse of disposable masks led to a significant release of microplastic fibres, potentially leading to their migration into the respiratory system. Furthermore, the release of microplastic fibres increased with prolonged external friction, particularly when masks were stored in pockets. The large-scale release of microplastic fibres due to mask reuse raises concerns about potential health risks to the human respiratory system. The reuse of disposable masks should be also strictly avoided in daily life in the future. Furthermore, the current study also established a robust foundation for future research endeavours on health risks associated with microplastic fibres entering the respiratory system through improper mask usage.

How to Identify and Quantify Microplastics and Nanoplastics Using Raman Imaging?

While microplastics and nanoplastics are emerging as a big environmental concern, their characterization is still a challenge, particularly for identification and simultaneous quantification analysis where imaging via a hyper spectrum is generally needed. In the past few years, Raman imaging has been greatly advanced, but the analysis protocol is complicated and not yet standardized because imaging analysis is different from traditional analysis. Herein we provide a step-by-step demonstration of how to employ confocal Raman techniques to image microplastics and nanoplastics.

Qualitative discrimination and quantitative prediction of microplastics in ash based on near-infrared spectroscopy

Microplastics are recognized as a new environmental pollutant. Researchers have detected their presence in waste incineration ash. However, traditional testing methods take a very long testing period. There is a lack of research on detecting microplastics in waste incineration ash. In this paper, a portable near-infrared spectra (NIRS) spectrometer was used for qualitative discrimination and quantitative prediction of microplastics in ash. A total of 84 sets of simulated ash samples containing different types (PP, PS, PE, and PVC) and contents (2.4 wt% - 20 wt%) of microplastics were used in the model. The results show the qualitative discrimination model using support vector machines (SVM) method with multiplicative scatter correction (MSC) preprocessing could effectively identify the microplastic types in the ash with 100% detection accuracy. Furthermore, the partial least squares regression (PLSR) model was effective in quantitatively predicting the content of microplastics in ash. The Rp2 of the PP, PS, PE, and PVC models are 0.95, 0.93, 0.89, and 0.95, respectively. The RPD of the PP, PS, PE, and PVC models are 3.97, 3.96, 2.89 and 5.02, respectively. This study shows that microplastics in ash can be detected rapidly and accurately using portable near-infrared spectrometers.

Aging and mitigation of microplastics during sewage sludge treatments: An overview

Wastewater treatment plants (WWTPs) receive large quantities of microplastics (MPs) from raw wastewater, but many MPs are trapped in the sludge. Land application of sludge is a significant source of MP pollution. Existing reviews have summarized the analysis methods of MPs in sludge and the effect of MPs on sludge treatments. However, MP aging and mitigation during sludge treatment processes are not fully reviewed. Treatment processes used to remove water, pathogenic microorganisms, and other pollutants in sewage sludge also cause surface changes and degradation in the sludge MPs, affecting the potential risk of MPs. This study integrates MP abundance and distribution in sludge and their aging and mitigation characteristics during sludge treatment processes. The abundance, composition, and distribution of sludge MPs vary significantly with WWTPs. Furthermore, MPs exhibit variable degrees of aging, including rough surfaces, enhanced adsorption potentials for pollutants, and increased leaching behavior. Various sludge treatment processes further intensify these aging characteristics. Some sludge treatments, such as hydrothermal treatment, have efficiently removed MPs from sewage sludge. It is crucial to understand the potential risk of MP aging in sludge and the degradation properties of the MP-derived products from MP degradation in-depth and develop novel MP mitigation strategies in sludge, such as combining hydrothermal treatment and biological processes.

Polymer Waste Recycling of Injection Molding Purges with Softening for Cutting with Fresnel Solar Collector-A Real Problem Linked to Sustainability and the Circular Economy

A plastic injection waste known as "purge" cannot be reintegrated into the recycling chain due to its shape, size, and composition. Grinding these cannot be carried out with traditional mills due to significant variations in size and shape. This work proposes a process and the design of a device that operates with solar energy to cut the purges without exceeding the degradation temperature. The size reduction allows reprocessing, revalorization, and handling. The purges are mixtures of processed polymers, so their characterization information is unavailable. Some characterizations were conducted before the design of the process and after the cut of the purges. Some of the most representative purges in a recycling company were evaluated. The flame test determines that all material mixtures retain thermoplasticity. The hardness (Shore D) presented changes in four of the purges being assessed, with results in a range of 59-71 before softening and 60-68 after softening. Young's modulus was analyzed by the impulse excitation technique (IET), which was 2.38-3.95 GPa before softening and 1.7-4.28 after softening. The feasibility of cutting purges at their softening temperature was evaluated. This was achieved in all the purges evaluated at 250-280 °C. FTIR allowed for corroboration of no significant change in the purges after softening. The five types of purges evaluated were polypropylene-ABS, polycarbonate-ABS-polypropylene, yellow nylon 66, acetal, and black nylon 66 with fillers, and all were easily cut at their softening temperature, allowing their manipulation in subsequent process steps.

Influence of operating parameters on the yield of micro-plastics from plastics incineration

Plastics account for a large proportion of domestic waste. However, micro-plastics will be produced after the plastic is incinerated. The purpose of this study is to find out the change rule of micro-plastics produced during incineration under different conditions. Combining micro-FTIR and PCA algorithm is a good tool to identify the micro-plastics. The PE, PP and PVC micro-plastics are distinguished using PCA-FTIR spectra. The results show different incineration conditions significantly affect the output of micro-plastics. The yield of micro-plastics increases with increasing temperature for both PP and PVC. And the yield of micro-plastics decreases with the increase in flow rate. The maximum amount of micro-plastics is produced by PE, which is 6.62 × 103 after 1 g PE incineration. The yield of micro-plastics in the co-incineration of PE and PP, as well as PE and PVC, significantly increased to 1.42 and 1.89 times of the calculated values, respectively. The nano-particles are also observed. The FTIR and EDS results show that the nano-particles are the products of incineration of plastics, including partly CH bond and unburned carbon, tar and ash.

Characterising microplastics in indoor air: Insights from Raman imaging analysis of air filter samples

We are directly exposed to microplastic contamination via indoor air that we breathe daily, for which the characterisation of microplastics is still a challenge. Herein, two typical air filter samples were collected, one from an air-conditioner and another from a personal computer, both of which have been working for around half a year to collect and accumulate microplastics in the indoor air, like microplastic banks. After the sample preparation to remove the mineral dusts, Raman imaging was employed to directly and simultaneously identify and visualise microplastics of polyethylene terephthalate (PET) fibres, distinguish them from other fibres such as cellulose and cross-check them with a scanning electron microscope (SEM). To count the microplastics and to avoid the quantification bias, several areas were randomly scanned and imaged to statistically estimate the percentage of microplastic fibres in the analysed samples. The microplastics amount, which has been estimated at 73-88,000 fibers per filter per half a year, varies and depends on the indoor environment so that the air filter can work as a good indicator to monitor the quality of the indoor air from the microplastic perspective. Overall, human are directly exposed to this emerging contamination every day, raising environmental concerns. Raman imaging characterisation and its corresponding statistical information can help pursue further research on microplastics.

Quantifying the Chemical Composition and Real-Time Mass Loading of Nanoplastic Particles in the Atmosphere Using Aerosol Mass Spectrometry

Plastic debris, including nanoplastic particles (NPPs), has emerged as an important global environmental issue due to its detrimental effects on human health, ecosystems, and climate. Atmospheric processes play an important role in the transportation and fate of plastic particles in the environment. In this study, a high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) was employed to establish the first online approach for identification and quantification of airborne submicrometer polystyrene (PS) NPPs from laboratory-generated and ambient aerosols. The fragmentation ion C8H8+ is identified as the major tracer ion for PS nanoplastic particles, achieving an 1-h detection limit of 4.96 ng/m3. Ambient PS NPPs measured at an urban location in Texas are quantified to be 30 ± 20 ng/m3 by applying the AMS data with a constrained positive matrix factorization (PMF) method using the multilinear engine (ME-2). Careful analysis of ambient data reveals that atmospheric PS NPPs were enhanced as air mass passed through a waste incinerator plant, suggesting that incineration of waste may serve as a source of ambient NPPs. The online quantification of NPPs achieved through this study can significantly improve our understanding of the source, transport, fate, and climate effects of atmospheric NPPs to mitigate this emerging global environmental issue.

Simultaneous degradation of microplastics and sludge during wet air oxidation

Microplastics (MPs) generated from daily life are commonly collected by urban sewage pipe networks and then transfer to sludge in wastewater treatment plants. Conventional biochemical treatment processes cannot degrade MPs effectively, causing an ecological risk via sludge land use. Wet air oxidation (WAO) is a promising sludge treatment technology with a strong ability to decompose complex organic matter, but its potential for the removal of MPs in sludge was unclear. In this study, three common MPs (polyethylene, polystyrene, and polyethylene terephthalate, which are called PEMPs, PSMPs, and PETMPs) were added into the sludge samples (1 g MP in 180 mL sludge), to test the effects of WAO on sludge and MPs. The results showed that WAO simultaneously degraded sludge and the PEMPs, and the two degradation processes were relatively independent when oxygen was supplied adequately. The dissolution of PSMPs and organic matter in sludge was not affected by each other, but the degradation rate was slowed down due to the interaction of ketones and benzene compounds. The hydrolysis of sludge and PETMPs was accelerated, while the hydrolyzed products such as terephthalic acid were oxidized without interfering with each other. No obvious MPs remained in the effluent, and volatile fatty acids (VFAs) were the main components, among which acetic acid accounted for 90%. When the sludge was treated with PEMPs, PSMPs, or PETMPs, the concentration of acetic acid finally accounted for 45%, 21%, and 18% of DOC. Overall, MPs can be degraded or even mineralized during sludge WAO, and humic acid derivatives, acetate, and other small molecules of alcohols, ketones, or aldehydes were the typical intermediates.

Effect of ultrasonication conditions on polyethylene microplastics sourced from landfills: A precursor study to establish guidelines for their extraction from environmental matrices

Establishing concentration of microplastics (MPs), designated as CMP, in aqueous, semi-solid and solid samples originating from unscientifically created landfills/dumpsites (UCLDs) and engineered landfills (ELFs) is of utmost importance to assess their impact on the geoenvironment. However, the accuracy of CMP will be guided by the extraction efficiency of MPs from these samples. The extraction of MPs from semi-solid and solid samples of UCLDs/ELFs would be cumbersome, mainly due to their trapping in solid aggregates (including organic matter). Such aggregates need to be dispersed to release the MPs, which can be achieved through the assistance of ultrasonication (US) in the presence of an appropriate dispersing agent. However, mere dispersion of solid aggregates during the US might not result in the complete release of MPs adhered (AMPs) to MPs native (NMPs) to these samples. This is because MPs would adhere to the surface of the adjacent ones due to various physical-mechanical-thermal-chemical processes that prevail in landfills. Hence, guidelines for US-assisted extraction of MPs should be developed by considering an approach that would ensure (i) cleaning of NMPs' surface and (ii) release of AMPs without damaging the former. This necessitates understanding the influence of US parameters such as energy applied (Eus), time (tus) and direct/indirect exposure of NMPs from landfills that would control CMP. In this context, the influence of above mentioned US parameters on the (i) surface cleaning of polyethylene NMPs and (ii) release of AMPs and their concentrations (CAMP) was investigated. It was observed that Eus equal to 500 kJ/L during the indirect method of US would result in surface cleaning of NMPs and complete release of AMPs without damaging the farmer's structure. The present work acts as a precursor study to establish the guidelines for the US-assisted extraction of MPs in environmental samples. Also, a generalized relationship between Eus and CAMP, which can be employed to study the impact of landfill type on the release of MPs during the US was developed.

Material flow analysis-based assessment of polypropylene-fiber-containing microplastics released from disposable masks: Characterizing distribution in the environmental media

With the upsurge in the use of disposable masks during the coronavirus disease pandemic, improper disposal of discarded masks and their negative impact on the environment have emerged as major issues. Improperly disposed of masks release various pollutants, particularly microplastic (MP) fibers, which can harm both terrestrial and aquatic ecosystems by interfering with the nutrient cycling, plant growth, and the health and reproductive success of organisms. This study assesses the environmental distribution of polypropylene (PP)-containing MPs, generated from disposable masks, using material flow analysis (MFA). The system flowchart is designed based on the processing efficiency of various compartments in the MFA model. The highest amount of MPs (99.7 %) is found in the landfill and soil compartments. A scenario analysis reveals that waste incineration significantly reduces the amount of MP transferred to landfills. Therefore, considering cogeneration and gradually increasing the incineration treatment rate are crucial to manage the processing load of waste incineration plants and minimize the negative impact of MPs on the environment. The findings provide insights into the potential environmental exposure associated with the improper disposal of waste masks and indicate strategies for sustainable mask disposal and management.

Chromium (IV) transfer to Amusium pleuronectes by LDPE microplastics: An experimental study

An experiment was carried out to investigate the potential of virgin LDPE microplastics to transfer heavy metals. Desired shapes (fibres, fragments, and films) and sizes (< 5 mm) of virgin LDPE microplastics were immersed in a known concentration (30 µg/l) of chromium (IV). These Cr-coated microplastics were introduced into a culture tank containing edible scallops (Amusium pleuronectes). After the completion of the experiment (5 days), the sediments in the culture tank and edible tissues of A. pleuronectes were tested for the presence of Cr. In the sediments, a maximum concentration of 1.934 µg/g of Cr was accumulated at a rate of R2 = 0.979, while in the tissues, the maximum accumulation concentration was 0.733 µg/g of Cr at a rate of R2 = 0.807. Energy Dispersive X-ray Spectroscopy analysis also confirmed the presence of Cr (2.61 ± 0.44 mass % and 1.80 ± 0.30 atom%) in the tissues of A. pleuronectes, which was absent in the control tissues. The study showed that when exposed to contaminants such as heavy metals, LDPE microplastics can adhere and transfer them to biotic tissues. LDPE showed the potential to transfer adhered contaminants; however, the effects caused by these transferred contaminants on biota must be studied further. Risk assessment study showed that potential ecological risk of Cr is < 40 indicating low risk however, the combined effect of Cr and LDPE can compound its toxicity which needs to be studied further.

Microplastics in waste management systems: A review of analytical methods, challenges and prospects

Numerous studies have reported the presence of microplastics (MPs) in waste collection and disposal systems. However, current scientific studies on measuring MP occurrence in a waste management context are not comparable due to a lack of standardized methodologies. Consequently, the impact of MPs on ecosystems and human health remains largely unclear. To address the inconsistencies, present in published studies, this review thoroughly examines sample preparation techniques for transfer stations, landfill leachate, recycling, compost, and incineration ash samples. Furthermore, various analytical approaches such as flotation, filtration, and organic matter digestion, as well as morphological categorization, identification, and quantification, are subsequently rigorously assessed. The benefits and limitations of each methodology are evaluated to facilitate the development of accurate and effective methods for detecting and characterizing nanoplastics. Recent research suggests that plastic recycling and composting facilities are the primary environmental sources of microplastic pollution among different waste treatment methods. The most prevalent microplastic types discovered in waste management were polyethylene (PE) and polypropylene (PP), with fragment and fiber being the most frequently reported morphologies. The review highlights a number of tactics that could be integrated into the methodology development for detecting microplastics in waste management systems (WMS), ultimately leading to better consistency and reliability of data across different studies. In essence, this will advance our comprehension of potential risks associated with microplastics.

Discovery and mechanism-guided engineering of BHET hydrolases for improved PET recycling and upcycling

Although considerable research achievements have been made to address the plastic crisis using enzymes, their applications are limited due to incomplete degradation and low efficiency. Herein, we report the identification and subsequent engineering of BHETases, which have the potential to improve the efficiency of PET recycling and upcycling. Two BHETases (ChryBHETase and BsEst) are identified from the environment via enzyme mining. Subsequently, mechanism-guided barrier engineering is employed to yield two robust and thermostable ΔBHETases with up to 3.5-fold enhanced kcat/KM than wild-type, followed by atomic resolution understanding. Coupling ΔBHETase into a two-enzyme system overcomes the challenge of heterogeneous product formation and results in up to 7.0-fold improved TPA production than seven state-of-the-art PET hydrolases, under the conditions used here. Finally, we employ a ΔBHETase-joined tandem chemical-enzymatic approach to valorize 21 commercial post-consumed plastics into virgin PET and an example chemical (p-phthaloyl chloride) for achieving the closed-loop PET recycling and open-loop PET upcycling.

Microplastics in landfill leachate: Occurrence, health concerns, and removal strategies

Landfills are commonly used to manage solid waste, but they can contribute to microplastic (MPs) pollution. As plastic waste degrades in landfills, MPs are released into the surrounding environment, contaminating soil, groundwater, and surface water. This poses a threat to human health and the environment, as MPs can adsorb toxic substances. This paper provides a comprehensive review of the degradation process of macroplastics into microplastics, the types of MPs found in landfill leachate (LL), and the potential toxicity of microplastic pollution. The study also evaluates various physical-chemical and biological treatment methods for removing MPs from wastewater. The concentration of MPs in young landfills is higher than in old landfills, and specific polymers such as polypropylene, polystyrene, nylon, and polycarbonate contribute significantly to microplastic contamination. Primary treatments such as chemical precipitation and electrocoagulation can remove up to 60-99% of total MPs from wastewater, while tertiary treatments such as sand filtration, ultrafiltration, and reverse osmosis can remove up to 90-99%. Advanced techniques, such as a combination of membrane bioreactor, ultrafiltration, and nanofiltration (MBR + UF + NF), can achieve even higher removal rates. Overall, this paper highlights the importance of continuous monitoring of microplastic pollution and the need for effective microplastic removal from LL to protect human and environmental health. However, more research is needed to determine the actual cost and feasibility of these treatment processes at a larger scale.

Global plastic upcycling during and after the COVID-19 pandemic: The status and perspective

Plastic pollution has become one of the most pressing environmental issues worldwide since the vast majority of post-consumer plastics are hard to degrade in the environment. The coronavirus disease (COVID-19) pandemic had disrupted the previous effort of plastic pollution mitigation to a great extent due to the overflow of plastic-based medical waste. In the post-pandemic era, the remaining challenge is how to motivate global action towards a plastic circular economy. The need for one package of sustainable and systematic plastic upcycling approaches has never been greater to address such a challenge. In this review, we summarized the threat of plastic pollution during COVID-19 to public health and ecosystem. In order to solve the aforementioned challenges, we present a shifting concept, regeneration value from plastic waste, that provides four promising pathways to achieve a sustainable circular economy: 1) Increasing reusability and biodegradability of plastics; 2) Transforming plastic waste into high-value products by chemical approaches; 3) The closed-loop recycling can be promoted by biodegradation; 4) Involving renewable energy into plastic upcycling. Additionally, the joint efforts from different social perspectives are also encouraged to create the necessary economic and environmental impetus for a circular economy.

Occurrence and ecological risks of microplastics and phthalate esters in organic solid wastes: In a landfill located nearby the Persian Gulf

Landfill sites are the main source of plastic waste. Thus, municipal solid waste (MSW) in landfills may act as a reservior of microplastics (MPs) and related pollutants such as phthalate esters (PAEs) into surrounding environment. However, there is limited information on MPs and PAEs in landfill sites. Levels of MPs and PAEs in organic solid waste disposed in a landfill of Bushehr port were investigated for the first time in this study. The mean MPs and PAEs levels in organic MSW samples were 12.3 items/g and 7.99 μg/g, respectively, and the mean PAEs concentration in MPs was 87.5 μg/g. The highest number of MPs was related to the size classes of >1000 μm and <25 μm. The highest dominant type, color, and shape of MPs in organic MSW were nylon, white/transparent, and fragments, respectively. Di (2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DiBP) were the dominant compounds of PAEs in organic MSW. Based on the finding of present study, MPs showed a high hazard index (HI). DEHP, dioctyl phthalate (DOP), and DiBP demonstrated high-level hazards for sensitive organisms in water. This work illustrated considerable MPs and PAEs levels from an uncontrolled landfill without adequate protection, possibly contributing to their release into the environment. The sites of landfill located near marine environments, such as Bushehr port landfill adjacent to the Persian Gulf, may indicate critical threats to marine organisms and the food chain. Continuous landfills control and monitoring, especially the ones near the coastal area, is highly recommended to prevent further environmental pollution.

Base- or acid-assisted polystyrene plastic degradation in supercritical CO2

Plastic has caused serious "white pollution" to the environment, and the highly inert characteristics of plastic bring a major challenge for degradation. Supercritical fluids have unique physical properties and have been widely used in various fields. In this work, supercritical CO2 (Sc-CO2) with mild conditions was selected and assisted by NaOH/HCl solution to degrade polystyrene (PS) plastic, and the reaction model was designed using response surface methodology (RSM). It was found that, regardless of the types of assistance solutions, the factors affecting PS degradation efficiencies were reaction temperature, reaction time, and NaOH/HCl concentration. At the temperature of 400 °C, time of 120 min, and base/acid concentration of 5% (in weight), 0.15 g PS produced 126.88/116.99±5 mL of gases with 74.18/62.78±5 mL of H2, and consumed 81.2/71.5±5 mL of CO2. Sc-CO2 created a homogeneous environment, which made PS highly dispersed and uniformly heated, thus promoting the degradation of PS. Moreover, Sc-CO2 also reacted with the degradation products to produce new CO and more CH4 and C2Hx (x=4, 6). Adding NaOH/HCl solution not only improved the solubility of PS in Sc-CO2, but also provided a base/acid environment that reduced the activation energy of the reaction, and effectively improved the degradation efficiencies of PS. In short, degrading PS in Sc-CO2 is feasible, and better results are obtained with the assistance of base/acid solution, which can provide a reference for the disposal of waste plastics in the future.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42768-023-00139-1.

Why have we not yet solved the challenge of plastic degradation by biological means?

The invention of fossil fuel-derived plastics changed and reshaped society for the better; however, their mass production has created an unprecedented accumulation of waste and an environmental crisis. Scientists are searching for better ways to reduce plastic waste than the current methods of mechanical recycling and incineration, which are only partial solutions. Biological means of breaking down plastics have been investigated as alternatives, with studies mostly focusing on using microorganisms to biologically degrade sturdy plastics like polyethylene (PE). Unfortunately, after a few decades of research, biodegradation by microorganisms has not provided the hoped-for results. Recent studies suggest that insects could provide a new avenue for investigation into biotechnological tools, with the discovery of enzymes that can oxidize untreated PE. But how can insects provide a solution that could potentially make a difference? And how can biotechnology revolutionize the plastic industry to stop ongoing/increasing contamination?

Microplastics contamination associated with low-value domestic source organic solid waste: A review

Waste activated sludge and food waste are two typical important domestic low-value organic solid wastes (LOSW). LOSW contains significant organic matter and water content resulting in the transboundary transfer of liquid-solid-gas and other multi-mediums, such that the complexity of microplastics (MPs) migration should be of greater concern. This article provides a review of the literature focusing on the separation and extraction methods of MPs from LOSW. The occurrence and source of MPs are discussed, and the output and impact of MPs on LOSW heat and biological treatments are summarized. The fate and co-effects of MPs and other pollutants in landfills and soils are reviewed. This review highlights the migration and transformation of MPs in domestic source LOSW, and future perspectives focused on the development of a unified extraction and analysis protocol. The objective of this review is to promote the technological development of decontamination of MPs in LOSW by sufficient understanding of the fate of MPs, their interaction with coexisting pollutants and the development of targeted preventive research strategies.

Integrating a Chemicals Perspective into the Global Plastic Treaty

Driven by the growing concern about plastic pollution, countries have agreed to establish a global plastic treaty addressing the full life cycle of plastics. However, while plastics are complex materials consisting of mixtures of chemicals such as additives, processing aids, and nonintentionally added substances, it is at risk that the chemical aspects of plastics may be overlooked in the forthcoming treaty. This is highly concerning because a large variety of over 10,000 chemical substances may have been used in plastic production, and many of them are known to be hazardous to human health and the environment. In this Global Perspective, we further highlight an additional, generally overlooked, but critical aspect that many chemicals in plastics hamper the technological solutions envisioned to solve some of the major plastic issues: mechanical recycling, waste-to-energy, chemical recycling, biobased plastics, biodegradable plastics, and durable plastics. Building on existing success stories, we outline three concrete recommendations on how the chemical aspects can be integrated into the global plastic treaty to ensure its effectiveness: (1) reducing the complexity of chemicals in plastics, (2) ensuring the transparency of chemicals in plastics, and (3) aligning the right incentives for a systematic transition.

The fate of microplastic in sludge management systems

Sewage sludge (SS) from wastewater treatment plants (WWTPs) is commonly used as a soil amendment on agricultural land; however, this sludge contains microplastics (MPs) which harm soil ecosystems and can leach into aquatic environments. This review aims to assess the fate of MPs in SS systems and, in the context of a changing agricultural scene, present alternatives for sustainable SS disposal that are consistent with the practices of a clean, circular economy. Anaerobic digestion and composting, which are commonly used to stabilize SS before land application, were not reported to substantially affect MP removal, although process efficiency and the microbiome were affected by MPs. Alternatively, MPs can be destroyed or removed by mono-incineration or combustion, but unfortunately, some MPs may remain in the ash after these processes. Therefore, the most desirable solutions would prevent MPs from entering the environment and remove them before they enter the biological part of a WWTP, where they build up in SS. Additionally, the management of MP-containing sludge must be adapted to the geographical context and the local economy, and it should begin with legislation addressing MPs in SS. The information presented here will help to develop good practices in waste management for preventing or decreasing the transfer of MPs into the environment.

Unraveling microplastics removal in wastewater treatment plant: A comparative study of two wastewater treatment plants in Thailand

Wastewater treatment plants (WWTPs) are considered as a problematic pathway for microplastics (MPs) entering the oceans. This study compares the efficiency of MP removal in two different WWTPs (A₁ and A₂) with a conventional treatment system located in Bangkok, Thailand. WWTP-A₂ is equipped with a pilot-scale ultrafiltration (UF) as a final polishing step. The number of MPs in the influent entering A₁ and A₂ was 16.55 ± 9.92 and 77.00 ± 7.21 MP/L, respectively. The average of 3.52 ± 1.43 and 10.67 ± 3.51 particles per L was found in the effluent discharged from A₁ and A₂, respectively, to nearby canals. The removal efficiency of WWTP-A₂ built as a closed underground system was shown to be up to 86.14% which is more efficient than the conventional WWTP (A₁). MPs were subsequently removed by a UF unit which resulted in a removal efficiency of 96.97%. However, when a large volume of treated wastewater volume is considered, a high concentration of MPs is discharged daily with the final effluent if the efficiency remains the same. The size fraction of 0.5-0.05 mm contributed to the largest proportion of MPs, and fibers were detected as the dominant group at both study sites. Results from a Fourier Transform Infrared Spectroscopy (FT-IR) confirmed that most fibers were polyethylene terephthalate (PET) derived from clothes. MPs retained in the sludge ranged from 2.63 × 10⁴ to 4.74 × 10⁴ particles per kilogram of dry sludge. A significant number of MPs can spread further to the environment by soil application. The results of the study indicate that the design of WWTPs and the addition of advanced tertiary treatment can improve MP removal efficiency of a WWTP. Moreover, the absence of a primary sedimentation tank in both treatment plants may influence the removal efficiency.

Atmospheric micro (nano) plastics: future growing concerns for human health

Abstract

Plastics are an integral but largely inconspicuous part of daily human routines. The present review paper uses cross-disciplinary scientific literature to examine and assess the possible effects of nanoplastics (NPs) concerning microplastics (MPs) on human health and summarizes crucial areas for future research. Although research on the nature and consequences of MPs has seen a substantial rise, only limited studies have concentrated on the atmospheric nanosized polymeric particles. However, due to the intrinsic technological complications in separating and computing them, their existence has been difficult to determine correctly. There is a consensus that these are not only existing in the environment but can get directly released or as the outcome of weathering of larger fragments, and it is believed to be that combustion can be the tertiary source of polymeric particles. NPs can have harmful consequences on human health, and their exposure may happen via ingestion, inhalation, or absorption by the skin. The atmospheric fallout of micro (nano) plastics may be responsible for contaminating the environment. Apart from this, different drivers affect the concentration of micro (nano) plastics in every environment compartment like wind, water currents, vectors, soil erosion, run-off, etc. Their high specific surface for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. These NPs could potentially cause physical damage by the particles themselves and biological stress by NPs alone or by leaching additives. However, there is minimal understanding of the occurrence, distribution, abundance, and fate of NPs in the environment, partially due to the lack of suitable techniques for separating and identifying NPs from complex environmental matrices.

Highlights

Micro (nano) plastics generated may reach the soil, water, and atmospheric compartments.Atmospheric currents serve as a way to transport, leading to micro (nano) plastics pollution.Exposure to micro (nano) plastics may happen via ingestion, inhalation, or absorption by the skin.Nanoplastics may be environmentally more harmful than other plastic particles; the focus should be on defining the exact size range.Visual classification of micro (nano) plastics is poor in reliability and may also contribute to microplastics being misidentified.

Graphical abstract

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Since municipal solid waste incineration bottom ash (MSWIBA) contains some heavy metals that are harmful to the groundwater and soil, this study proposes an effective and new approach to deal with high-volume MSWIBA. Selecting 70% MSWIBA, 10% ordinary Portland cement (OPC), 10% fly ash/ground granulated blast furnace slag (FA/GGBFS), and 1% volume of polypropylene (PP) fiber as the raw materials, this project designed and manufactured cold-bonded fiber aggregates (CBFAs) and applied them into sustainable concrete. It was found that the water absorption of CBFAs was between 12 and 14%, the bulk density was between 900 and 1100 kg/m³, and the compressive strength of single particle was greater than 1.8 MPa. And it was found that the mechanical strength and bulk density of CBFAs were positively correlated, while the mechanical strength and water absorption were negatively correlated. The leaching behaviors of CBFAs on Cu, Pb, Cd, and Cr were successfully suppressed to less than 1% of that originally from MSWIBA, which can be in line with the Chinese standards. Additionally, it is also found that the green concrete with adding GGBFS-CBFAs has higher overall fluidity and better mechanical properties than the concrete with FA-CBFAs. The mechanical properties of concrete were the best under the replacement rate of 60% of CFBAs, and the strength of green concrete added with GGBFS-CBFAs reached 96% of that of ordinary concrete. In this study, the rapid chloride ion penetration test, mercury intrusion and electron microscope tests found that the bonding effect between the CBFAs and the green concrete matrix was better, and the pore structure in the transition zone of the surrounding interface was refined. The proportion of transition pores in the pore structure was up to 59%. This shows that the concrete added with CBFAs has better resistance to chloride ion diffusion, and has some improvement on the durability. This research suggests that CBFAs including high volume MSWIBA has the potential to be successfully applied as the alternative to natural aggregates in sustainable concrete, and this can also advance waste recycling, and solidify high volume heavy metals in infrastructures.

Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution

To prevent the COVID-19 transmission, personal protective equipment (PPE) and packaging materials have been extensively used but often managed inappropriately, generating huge amount of plastic waste. In this review, we comprehensively discussed the plastic products utilized and the types and amounts of plastic waste generated since the outbreak of COVID-19, and reviewed the potential treatments for these plastic wastes. Upcycling of plastic waste into biochar was addressed from the perspectives of both environmental protection and practical applications, which can be verified as promising materials for environmental protections and energy storages. Moreover, novel upcycling of plastic waste into biochar is beneficial to mitigate the ubiquitous plastic pollution, avoiding harmful impacts on human and ecosystem through direct and indirect micro-/nano-plastic transmission routes, and achieving the sustainable plastic waste management for value-added products, simultaneously. This suggests that the plastic waste could be treated as a valuable resource in an advanced and green manner.

Modifications of microplastics in urban environmental management systems: A review

Microplastics (MPs) are a worldwide environmental pollution issue. Besides the natural environmental stresses, various treatments in urban environmental management systems induce modifications on MPs, further affecting their environmental behavior. Investigating these modifications and inherent mechanisms is crucial for assessing the environmental impact and risk of MPs. In this review, up-to-date knowledge regarding the modifications of MPs in urban environmental management systems was summarized. Variations of morphology, chemical composition, hydrophilicity and specific surface area of MPs were generalized. The aging and degradation of MPs during drinking water treatment, wastewater treatment, sewage sludge treatment and solid waste treatment were investigated. A high abundance of MPs occurred in sewage sludge and aging solid waste, while digestion and composting contributed to significant decomposition and reduction of MPs. These treatments have become converters for MPs before entering the environment. Several novel technologies for MPs removal were listed; However, no appropriate methods can be put into actual application by now, except the membrane separation. The corresponding effects of degradation on the behaviors of MPs, including adsorption, sinking and contaminant leakage, were discussed. Finally, three priorities for research were proposed. This critical review provides viewpoints and references for risk evaluation of MPs after treatments in urban environmental management systems.

Microplastics aging in wastewater treatment plants: Focusing on physicochemical characteristics changes and corresponding environmental risks

Microplastics (MPs) have been frequently detected in effluent wastewater and sludge in wastewater treatment plants (WWTPs), the discharge and agricultural application of which represent a primary source of environmental MPs contamination. As important as quantitative removal is, changes of physicochemical characteristics of MPs (e.g., shapes, sizes, density, crystallinity) in WWTPs are crucial to their environmental behaviors and risks and have not been put enough attention yet. This review is therefore to provide a current overview on the changes of physicochemical characteristics of MPs in WWTPs and their corresponding environmental risks. The changes of physicochemical characteristics as well as the underlying mechanisms of MPs in different successional wastewater and sludge treatment stages that mainly driven by mechanical (e.g., mixing, pumping, filtering), chemical (e.g., flocculation, advanced oxidation, ultraviolet radiation, thermal hydrolysis, incineration and lime stabilization), biological (e.g., activated sludge process, anaerobic digestion, composition) and their combination effects were first recapitulated. Then, the inevitable correlations between physicochemical characteristics of MPs and their environmental behaviors (e.g., migration, adsorption) and risks (e.g., animals, plants, microbes), are comprehensively discussed with particular emphasis on the leaching of additives and physicochemical characteristics that affect the co-exist pollutants behavior of MPs in WWTPs on environmental risks. Finally, knowing the summarized above, some relating unanswered questions and concerns that need to be unveiled in the future are prospected. The physicochemical properties of MPs change after passing through WWTP, leading to subsequent changes in co-contaminant adsorption, migration, and toxicity. This could threaten our ecosystems and human health and must be worth investigating.

The role of microplastics in altering arsenic fractionation and microbial community structures in arsenic-contaminated riverine sediments

The ability of microplastics (MPs) to interact with environmental pollutants is of great concern. Riverine sediments, as sinks for multi-pollutants, have been rarely studied for MPs risk evaluation. Meanwhile, MPs generated from biodegradable plastics are questioning the safety of the promising materials. In this study, we investigated the effects of typical non-degradable polyethylene (PE) and biodegradable polylactic acid (PLA) MPs on sediment enzymes, arsenic (As) fractionation, and microbial community structures in As-contaminated riverine sediments. The results indicated that the presence of MPs (1% and 3%, w/w) led As transformed into more labile and bioavailable fractions in riverine sediments, especially under higher As and MPs levels. Analysis on microbial activities and community structures confirmed the strong potential of MPs in inhibiting microbial activities and shifting bacterial community succession patterns through enrichment of certain microbiota. Moreover, biodegradable PLA MPs presented stronger alterations in arsenic fractionation and microbial community structures than PE MPs did, which might be jointly attributed to adsorption behaviors, microbial alterations, and potential PLA degradation behaviors. The study indicated that MPs contamination increased As mobility and bioavailability, and shifted microbial communities in riverine sediments. Moreover, biodegradable MPs might lead to stronger microbial alterations and increases in As bioavailability, acting as a threat to ecological safety, which needed further exploration.

A comprehensive review on integrative approach for sustainable management of plastic waste and its associated externalities

The management of post-consumer discarded plastic wastes (PCPW) creates new challenges in developing countries due to the lack of amenities, technological interventions, and associated negative environmental externalities. The fate of untreated recyclable and non-recyclable plastic wastes lies in open dumping along with other solid waste, and improper management leads to environmental externalities such as pollution, global climate change, and health issues. Additionally, open dumping upsurges the emerging microplastics and nano plastics (MNPs) contaminants. The externalities depend on the waste generating sources (household, industries, commercial), waste composition, and its characteristics. However, urban mining can minimize environmental externalities where waste plastics can convert into potential anthropogenic resources and also helps in achieving the target of sustainable development goals (SDGs 11 & 12). Moreover, various treatment technologies that help in the sustainable utilization of plastic wastes are extensively reviewed in this study and evaluate the costs benefits arising during various stages of treating plastic waste through recycling (R), incineration (I), and landfilling (L). The recycling of plastic waste has demonstrated the lowest impact on global warming potential (GWP) and total energy use (TEU), followed by landfilling and incineration (R < L < I). Nevertheless, when energy is recovered from inert (non-recyclable) plastic waste in the form of fuel or by its utilization in construction purposes, the environmental impacts are more negligible (Incineration < Landfilling). Therefore, this study determines the significance of circular economy with legislative approach and standards on plastic waste management, which help in reducing environmental externalities besides yielding a secondary resource as energy and materials through urban mining. A sustainable plastic waste management (SPWM) model is proposed for developing countries to convert plastic waste into resources and use it as a sustainable tool in urban mining.

Pilot Study on Removal Characteristics of Multiple Pollutants by the Dual Baghouse Filter System

A 1000 Nm3/h capacity pilot scale dual baghouse filter system was tested on flue gas and fly ash from a municipal solid waste incinerator, and the removal efficiency of dioxins, heavy metals and HCl was studied. Activated carbon was injected at the inlet of the first baghouse filter to remove the gas phase dioxins and heavy metals, and baking soda was injected at the inlet of the second baghouse filter to remove HCl. Concentrations of dioxins at the outlet of the first and second baghouse were 0.034 and 0.011 ng TEQ/Nm3, respectively, which were both far below the national emission standard. The particulate matter concentration was 0.85 mg/m3, and the heavy metals leaching concentration of the fly ash from the second baghouse filter was lower than the hazardous waste identification standard. HCl concentration was almost zero at the outlet of the second baghouse filter when the optimal equivalence ratio of baking soda to HCl was 1.6. In addition, the estimated fly ash yield was 2.35% of the incinerated solid waste for the dual baghouse filter system, which was significantly lower than 3.5% as the traditional semidry scrubber + single baghouse filter.

The role of (bio)degradability on the management of petrochemical and bio-based plastic waste

In order to mitigate the social and ecological impacts of post-consumer plastic made of conventional petrochemical polymers, the market of (bio)degradable plastics have recently become more widespread. Although (bio)degradable plastics could be an environmentally friendly substitute of petrochemical ones, the consequences of their presence in the waste management system and in the environment (if not correctly disposed) are not always positive and plastic pollution is not automatically solved. Consequently, this work aims to review how plastic (bio)degradability affects the municipal solid waste management cycle. To this end, the state-of-the-art of the intrinsic (bio)degradability of conventional and unconventional petrochemical and bio-based polymers has been discussed, focusing on the environment related to the waste management system. Then, the focus was on strategies to improve polymer (bio)degradability: different types of eco-design and pre-treatment approach for plastics has been investigated, differently from other works that focused only on specific topics. The information gathered was used to discuss three typical disposal/treatment routes for plastic waste. Despite many of the proposed materials in eco-design have increased the plastics (bio)degradability and pre-treatments have showed interesting results, these achievements are not always positive in the current MSW management system. The effect on mechanical recycling is negative in several cases but the enhanced (bio)degradability can help the treatment with organic waste. On the other hand, the current waste treatment facility is not capable to manage this waste, leading to the incineration the most promising options. In this way, the consumption of raw materials will persist even by using (bio)degradable plastics, which strength the doubt if the solution of plastic pollution leads really on these materials. The review also highlighted the need for further research on this topic that is currently limited by the still scarce amount of (bio)degradable plastics in input to full-scale waste treatment plants.

Occurrence, impact, toxicity, and degradation methods of microplastics in environment-a review

Microplastic defines as a tiny plastic particle that has a size of less than 5 mm and is ubiquitous in the environment. Due to the tiny size, this microplastic adversely affected the environment, notably aquatic life via ingestion, choking, and entanglement. This microplastic is arduous to degrade as it takes a thousand years due to the properties of plastic itself and consequently remains in nature. In dealing with microplastic issues, this paper reflects the occurrence, impact, toxicity, and degradation methods of microplastics in the environment including physical, chemical, and biological treatments. Here, the physical treatment methods include incineration treatment, ultraviolet (UV), and photocatalytic. The incineration process contributes to environmental pollution due to the release of toxic gases into the atmosphere. In addition, chemical treatments for plastic waste are the degradation process involving chemical additives such as ethylene glycol (EG), nano-magnesium oxide (MgO), diethylene glycol (DEG), and calcium or zinc (Ca/Zn) stearate as a catalyst. These treatments depend on the chemicals that can affect human health and the ecosystem. The biodegradation treatment using bacterial and fungal species can consume the microplastic without disrupting the surrounding environment and biota. It includes recent findings on the biodegradation of microplastic under aerobic and anaerobic conditions. Thus, biodegradation can be considered the best option to degrade microplastic as green and sustainable technology.

A holistic approach for the recovery of rare earth elements and scandium from secondary sources under a circular economy framework - A review

Limited natural resources and a continuous increase in the demand for modern technological products, is creating a demand and supply gap for rare earth elements (REEs) and Sc. There is therefore a need to adopt the sustainable approach of the circular economy system (CE). In this review, we defined six steps required to close the loop and recover REEs, using a holistic approach. Recent statistics on REEs and Sc demand and the number of waste generations are reported and studies on more environmentally friendly, economic, and/or efficient recovery processes are summarized. Pilot-scale recovery facilities are described for several types of secondary sources. Finally, we identify obstacles to closing the REE loop in a circular economy and the reasons why secondary sources are not preferred over primary sources. Briefly, recovery from secondary sources should be environmentally and economically friendly and of an acceptable standard concerning final product quality. However, current technologies for recovery from for secondary sources are limiting and technology needs will vary depending on the source type. The quality/purity of the recovered metals should be proven so that they do not result in any adverse effects on the product quality, when they are being used as secondary raw material. In addition, for industrial-scale facilities, process improvements are required that consider environmental conditions.

Adsorption and photochemical capacity on 17α-ethinylestradiol by char produced in the thermo treatment process of plastic waste

Plastic is a major component of solid waste. It is often thermally treated, generating microplastics and plastic-char which end up as landfill. This study investigated the potential of plastic-char for treating persistent organic pollutants of aqueous media using 17α-ethinylestradiol (EE2) as a target contaminant. The adsorption and photodegradation capacity of plastic-char were investigated, and the adsorption isotherms revealed that EE2 adsorption on char is heterogeneous and multilayered. The presence of Fe was found to greatly enhance EE2 adsorption rate and capacity as well as photochemical degradation ability of plastic-char. Quenching experiments proved that electron transfer between triplet states of plastic-char and Fe(III) and the production of H₂O₂ were the rate-limited steps in the generation of reactive species. Hydroxyl radical and holes were found to be the predominant reactive species contributing to the EE2 photodegradation. This study not only elucidated the possible environmental behavior of plastic-char discharged as bottom ash in the natural transformation of persistent organic pollutants, but also suggested that water treatment may offer a use for some of the enormous volume of plastic waste now being generated worldwide.

Biomedical waste generation and management during COVID-19 pandemic in India: challenges and possible management strategies

The COVID-19 pandemic has resulted in the massive generation of biomedical waste (BMW) and plastic waste (PW). This sudden spike in BMW and PW has created challenges to the existing waste management infrastructure, especially in developing countries. Safe disposal of PW and BMW is essential; otherwise, this virus will lead to a waste pandemic. This paper reviews the generation of BMW and PW before and during the COVID-19 pandemic, the regulatory framework for BMW management, policy interventions for COVID-19-based BMW (C-BMW), the capacity of BMW treatment and disposal facilities to cope with the challenges, possible management strategies, and perspectives in the Indian context. This study indicated that policy intervention helped minimize the general waste treated as C-BMW, especially during the second pandemic. Inadequacy of common BMW treatment facilities' (CBMWTFs) capacity to cope with the BMW daily generation was observed in some states resulting in compromised treatment conditions. Suggestions for better management of BMW and PW include decontamination of used personal protective equipment (PPEs) and recycling, alternate materials for PPEs, segregation strategies, and use of BMW for co-processing in cement kilns. All upcoming CBMWTFs should be equipped with higher capacity and efficient incinerators for the sound management of BMW. Post-pandemic monitoring of environmental compartments is imperative to assess the possible impacts of pandemic waste.

Comparative bibliometric trends of microplastics and perfluoroalkyl and polyfluoroalkyl substances: how these hot environmental remediation research topics developed over time

Bibliometrics point to the hottest areas of science and policy working to reverse the environmental impacts of PFAS and microplastics.

Polyolefins and Polyethylene Terephthalate Package Wastes: Recycling and Use in Composites

Plastics are versatile materials used in a variety of sectors that have seen a rapid increase in their global production. Millions of tonnes of plastic wastes are generated each year, which puts pressure on plastic waste management methods to prevent their accumulation within the environment. Recycling is an attractive disposal method and aids the initiative of a circular plastic economy, but recycling still has challenges to overcome. This review starts with an overview of the current European recycling strategies for solid plastic waste and the challenges faced. Emphasis lies on the recycling of polyolefins (POs) and polyethylene terephthalate (PET) which are found in plastic packaging, as packaging contributes a signification proportion to solid plastic wastes. Both sections, the recycling of POs and PET, discuss the sources of wastes, chemical and mechanical recycling, effects of recycling on the material properties, strategies to improve the performance of recycled POs and PET, and finally the applications of recycled POs and PET. The review concludes with a discussion of the future potential and opportunities of recycled POs and PET.

Assessment of the emission factors for potentially toxic elements from coal-fired boilers and sintering furnaces in a steel production plant

The emission factor (EF), the weight of potentially toxic elements (PTEs) per unit energy or weight of sinter produced were evaluated for coal-fired boilers and sintering furnaces integrated in a steel plant. From three coal-fired boilers, 15 samples were taken while 22 samples were taken from four sintering furnaces. Investigations were performed on the EF of lead, cadmium, mercury, arsenic and chromium (VI). The coefficient of variance for the first 3 samples from each PTE was used to decide whether 2 more samples were necessary for the investigation. Three samples were sufficient for Cr (VI), however, 5 samples were required for Pb, Cd, Hg, and As, since the variances in concentrations of the first three samples exceeded 20%. The ranges for the ratio of the laboratory-based EF to the default EF applied by the Environment Protection Administration (EPA Taiwan) for Pb, Cd, Hg, and As for the coal-fired boiler were 0.08-0.013, 0.014-0.017, 0.019-0.033, 0.047-0.066 and for the sintering furnaces were 0.059-0.232, 0.05-0.151, 0.05-0.364, and 0.067-0.824. The ratio for Cr (VI)- was constant at 0.005 for all the coal fired boilers while it ranged from 0.057-0.709 for the sintering furnaces. Whilst source identification, enrichment factors, and spatial distributions for PTEs are often studied, laboratory-based investigations on the EFs for PTEs from industrial plants are rarely performed. This study filled the information gap and compared the obtained EFs with the EPA default values. To avoid overcharging industrial plants equipped with the best available technology for emission control, the EPA should apply field investigations and laboratory-based EFs instead of the default EPA EFs to calculate air pollution fees. Insights from this investigation can be applied to promote the adoption of appropriate air pollution control devices to cut down the emission of PTEs.

Neglected microplastics pollution in global COVID-19: Disposable surgical masks

There have been many studies on the microplastic pollution, influence and control mechanisms of different plastic products. The potential harm of microplastic pollution to the environment has been confirmed. With the outbreak and spread of the COVID-19 in the world, disposable surgical masks as effective and cheap protective medical equipment have been widely used by the public. Disposable masks have been a new social norm, but they must have a sense of environmental responsibilities. The random disposal of masks may result in new and greater microplastic pollution, because masks made of polymer materials would release microplastics after entering the environment. Current results showed that masks are a potential and easily overlooked source of environmental microplastics. The release amount of microplastics in the static water by one mask was 360 items, and with the increase of vibration rate, the release amount also increased. The addition of organic solvents (detergent and alcohol) in water would increase the release of microplastics from masks. When the mask became fragments, the ability to release microplastic fibers into the environment was greatly improved due to the increase of exposure area. After two months of natural weathering, the masks become very fragile pieces and microplastics. A fully weathered mask could release several billions of microplastic fibers into the aquatic environment once these fragile fragments enter the water without reservation. The rapid growth of mask production and consumption and improper disposable is worrying. It is urgent to understand the potential environmental risks and significance of masks.