Recycled wastewater as a potential source of microplastics in irrigated soils from an arid-insular territory (Fuerteventura, Spain)

Nano- and Microplastics Increase the Occurrence of Bacterial Wilt in Tomato (Solanum lycopersicum L.)

Concern over nano- and microplastic contamination of terrestrial ecosystems has been increasing. However, little is known about the effect of nano- and microplastics on the response of terrestrial ecosystems already under biotic stress. Here, nano- and microplastics at 150-500 mg·kg-1 were exposed to tomatoes (Solanum lycopersicum L.), and the results demonstrate that the presence of nano- and microplastics increased the occurrence of bacterial wilt caused by Ralstonia solanacearum in tomatoes as a function of contaminant concentration, surface modification, and size. Our work shows that nanoplastics (30 nm, 250 mg·kg-1) increased the disease incidence by 2.19-fold. The disease severities in amino- and carboxyl-modified nanoplastic treatments were 30.4 and 21.7% higher than that in unmodified nanoplastic treatment, respectively. The severity of disease under the influence of different-sized nano- and microplastic treatments followed the order 30 > 100 nm > 1 > 50 μm. Mechanistically, nanoplastics disrupted the structure of the tomato rhizosphere soil bacterial community and suppressed the induced systemic resistance in tomato; nanoplastics in planta decreased the salicylic acid and jasmonic acid content in tomatoes, thus inhibiting systemic acquired resistance; and microplastics increased the soil water retention, leading to increased pathogen abundance in the rhizosphere. Additionally, the leachates from nano- and microplastics had no effect on disease occurrence or the growth of tomatoes. Our findings highlight a potential risk of nano- and microplastic contamination to agriculture sustainability and food security.

The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives

Microplastic (MP) pollution has caused severe concern due to its harmful effect on human beings and ecosystems. Existing MP removal methods face many obstacles, such as high cost, high energy consumption, low efficiency, release of toxic chemicals, etc. Thus, it is crucial to find appropriate and sustainable methods to replace common MP removal approaches. Bio-electrochemical system (BES) is a sustainable clean energy technology that has been successfully applied to wastewater treatment, seawater desalination, metal removal, energy production, biosensors, etc. However, research reports on BES technology to eliminate MP pollution are limited. This paper reviews the mechanism, hazards, and common treatment methods of MP removal and discusses the application of BES systems to improve MP removal efficiency and sustainability. Firstly, the characteristics and limitations of common MP removal techniques are systematically summarized. Then, the potential application of BES technology in MP removal is explored. Furthermore, the feasibility and stability of the potential BES MP removal application are critically evalauted while recommendations for further research are proposed.

Microplastics removal in wastewater treatment plants: A review of the different approaches to limit their release in the environment

In last 10 years, the interest about the presence of microplastics (MPs) in the environment has strongly grown. Wastewaters function as a carrier for MPs contamination from source to the aquatic environment, so the knowledge of the fate of this emerging contaminant in wastewater treatment plants (WWTPs) is a priority. This work aims to review the presence of MPs in the influent wastewater (WW) and the effectiveness of the treatments of conventional WWTPs. Moreover, the negative impacts of MPs on the management of the processes have been also discussed. The work also focuses on the possible approaches to tackle MPs contamination enhancing the effectiveness of the WWTPs. Based on literature results, despite WWTPs are not designed for MPs removal from WW, they can effectively remove the MPs (up to 99 % in some references). Nevertheless, they normally act as "hotspots" of MPs contamination considering the remaining concentration of MPs in WWTPs' effluents can be several orders of magnitude higher than receiving waters. Moreover, MPs removed from WW are concentrated in sewage sludge (potentially >65 % of MPs entering the WWTP) posing a concern in case of the potential reuse as a soil improver. This work aims to present a paradigm shift intending WWTPs as key barriers for environmental protection. Approaches for increasing effectiveness against MPs have been discussed in order to define the optimal point(s) of the WWTP in which these technologies should be located. The need of a future legislation about MPs in water and sludge is discussed.

Identification and morphological characterization of different types of plastic microparticles

The knowledge of the polymeric composition of microplastics (MPs) is interesting because offers useful information on the resistance, durability, and degradability of these materials, also allowing progress in the control of this contamination. However, there is currently a lack of reliable standardized methods for the identification, and characterization of the plastic microparticles. This work uses different techniques in a complementary manner for the identification, and characterization of MPs that more frequently are found in the environment. A total of 10 types of plastics were collected (polystyrene (PS), polyethylene terephthalate (PETE), polyethylene (PE), high- and low-density polyethylene (HDPE and LDPE, respectively), polyvinyl chloride (PVC), polypropylene (PP), polytetrafluoroethylene (PTFE), Polyamide (PA, Nylon 6,6) and poly-carbonate (PC)) and their chemical identification were analyzed by reflectance-attenuated infrared (FTIR-ATR). Furthermore, the samples were observed using light microscopy, and scan-ning electron microscopy (SEM). Also, staining with 12 different dyes was performed to improve the identification of microplastics. The results of this study revealed that PETE, PE, HDPE and LDPE, whose SEM images exhibited smoothness and flat uniformity of their surface, were not (or less) susceptible to adsorb staining solutions while PP, PA, PVC, and PTFE, were capable of adsorbing the dye solutions.

Source-specific probabilistic risk assessment of microplastics in soils applying quality criteria and data alignment methods

The risk characterization of microplastics (MP) in soil is challenging due to the non-alignment of existing exposure and effect data. Therefore, we applied data alignment methods to assess the risks of MP in soils subject to different sources of MP pollution. Our findings reveal variations in MP characteristics among sources, emphasizing the need for source-specific alignments. To assess the reliability of the data, we applied Quality Assurance/Quality Control (QA/QC) screening tools. Risk assessment was carried out probabilistically, considering uncertainties in data alignments and effect thresholds. The Hazardous Concentrations for 5% (HC5) of the species were significantly higher compared to earlier studies and ranged between 4.0 × 107 and 2.3 × 108 particles (1-5000 µm)/kg of dry soil for different MP sources and ecologically relevant metrics. The highest risk was calculated for soils with MP entering via diffuse and unspecified local sources, i.e., "background pollution". However, the source with the highest proportion of high-risk values was sewage, followed by background pollution and mulching. Notably, locations exceeding the risk threshold obtained low scores in the QA/QC assessment. No risks were observed for soils with compost. To improve future risk assessments, we advise to primarily test environmentally relevant MP mixtures and adhere to strict quality criteria.

The characteristics and influencing factors of farmland soil microplastic in Hetao Irrigation District, China

Microplastic pollution, a major global concern, has garnered increasing attention in agricultural ecosystem research. China's Hetao Irrigation District, vital for grain production in the Yellow River Basin, lacks sufficient research on microplastic pollution of agricultural soils. This study, based on a detailed background investigation and testing of 47 samples, is the first to elucidate the characteristics and potential influencing factors of microplastics in the Hetao Irrigation District. The abundance of microplastics in the farmland soil ranged from 1810 to 86331 items/kg, with 90% measuring below 180 µm and mainly in film and fragment forms. Predominant polymers were polyethylene (PE, 43.0%) and polyamide (PA, 27.8%). Key pollution influencers were identified as agricultural inputs, with low-density polyethylene (LDPE) being the most extensively used plastic type. The carbonyl index and hydroxyl indices of the detected LDPE microplastics ranged from 0.041 to 0.96 and 0.092 to 1.20, respectively. The study highlights the significance of mulching management and agronomic practices in shaping microplastic characteristics. Potential pollution sources include agricultural inputs, irrigation equipment, domestic waste, and tire wear. Proposed effective strategies include responsible plastic use, robust waste management, and irrigation system upgrades, establishing a foundation for future ecological risk assessments and effective management approaches in the Hetao Irrigation District. ENVIRONMENTAL IMPLICATION: The harmful substances studied in this paper are microplastics, which are widely distributed in the environment and have potential ecological risks. This study is the first to investigate the characteristics of microplastics in farmland soil within the Hetao Irrigation Area, a region that is of critical importance to agricultural production in the Yellow River Basin of China. The study provides comprehensive insights into the factors influencing the characteristics of microplastics and speculates on their sources. These findings offer a novel perspective on the assessment of microplastic contamination in the area and provide valuable recommendations for prevention and control measures.

Beneath the water column: Uncovering microplastic pollution in the sublittoral coastal sediments of the Canary Islands, Spain

Marine ecosystems pollution by microplastics (MPs) is a global problem of special concern. The present study examines the prevalence and distribution of MPs and cellulosic particles in sublittoral coastal sediments of the Canary Islands archipelago (Spain). At twenty-six different locations alongside seven islands, three samples were taken parallel to the shoreline between 1 and 10 m depth (n = 78). Sediment samples were primarily digested with a H2O2 solution followed by four flotations in a saturated NaCl solution. The mean concentration obtained was 3.9 ± 1.6 items/g of dry weight. A similar distribution pattern was observed across all islands concerning particles morphology, color, size and composition: mainly colorless/translucent and blue fibers (60.0%). Additionally, fragments were also found, and to a much lesser extent microbeads, films and tangled messes. MicroFourier Transform Infrared spectroscopy analysis of 12.5% of the fibers, showed that they were mainly cellulosic (54.5%) -either natural or semisynthetic- followed by polyester (22.7%) and acrylic (4.5%). The potential correlation between particle distribution in nearshore sediments and wave intensity was also explored. This work provides the first comprehensive report on the current MPs content of the seabed of the region.

Polyethylene microplastics alter soil microbial community assembly and ecosystem multifunctionality

Although pervasive microplastics (MPs) pollution in terrestrial ecosystems invites increasing global concern, impact of MPs on soil microbial community assembly and ecosystem multifunctionality received relatively little attention. Here, we manipulated a mesocosm experiment to investigate how polyethylene MPs (PE MPs; 0, 1%, and 5%, w/w) influence ecosystem functions including plant production, soil quality, microbial community diversity and assembly, enzyme activities in carbon (C), nitrogen (N) and phosphorus (P) cycling, and multifunctionality in the maize-soil continuum. Results showed that PE MPs exerted negligible effect on plant biomass (dry weight). The treatment of 5% PE MPs caused declines in the availability of soil water, C and P, whereas enhanced soil pH and C storage. The activity of C-cycling enzymes (α/β-1, 4-glucosidase and β-D-cellobiohydrolase) was promoted by 1% PE MPs, while that of β-1, 4-glucosidase was inhibited by 5% PE MPs. The 5% PE MPs reduced the activity of N-cycling enzymes (protease and urease), whereas increased that of the P-cycling enzyme (alkaline phosphatase). The 5% PE MPs shifted soil microbial community composition, and increased the number of specialist species, microbial community stability and networks resistance. Moreover, PE MPs altered microbial community assembly, with 5% treatment decreasing dispersal limitation proportion (from 13.66% to 9.96%). Overall, ecosystem multifunctionality was improved by 1% concentration, while reduced by 5% concentration of PE MPs. The activity of α/β-1, 4-glucosidase, urease and protease, and ammonium-N content were the most important predictors of ecosystem multifunctionality. These results underscore that PE MPs can alter soil microbial community assembly and ecosystem multifunctionality, and thus development and implementation of practicable solutions to control soil MPs pollution become increasingly imperative in sustainable agricultural production.

Uptake, transport and accumulation of micro- and nano-plastics in terrestrial plants and health risk associated with their transfer to food chain - A mini review

Waste plastics enter the environment (water, soil, and atmosphere) and degrade into micro- and nano-plastics (MNPs) through physical, chemical, or biological processes. MNPs are ubiquitous in the environment and inevitably interact with terrestrial plants. Terrestrial plants have become important potential sinks, and subsequently, the sources of MNPs. At present, many studies have reported the effects of MNPs on plant physiology, biochemistry, and their phototoxicity. However, the source, detection method, and the absorption process of MNPs in terrestrial plants have not been systematically studied. In order to better understand the continuous process of MNPs entering terrestrial plants, this review introduces the sources and analysis methods of MNPs in terrestrial plants. The uptake pathways of MNPs in terrestrial plants and their influencing factors were systematically summarized. Meanwhile, the transport pathways and the accumulation of MNPs in different plant organs (roots, stems, leaves, calyxes, and fruits) were explored. Finally, the transfer of MNPs through food chains to humans and their health risks were discussed. The aim of this work is to provide significant theoretical knowledge to understand the uptake, transport, and accumulation of MNPs in terrestrial plants and the potential health risks associated with their transfer to humans through food chain.

Tackling microplastics pollution in global environment through integration of applied technology, policy instruments, and legislation

Microplastic pollution is a serious environmental problem that affects both aquatic and terrestrial ecosystems. Small particles with size of less than 5 mm, known as microplastics (MPs), persist in the environment and pose serious threats to various species from micro-organisms to humans. However, terrestrial environment has received less attention than the aquatic environment, despite being a major source of MPs that eventually reaches water body. To reflect its novelty, this work aims at providing a comprehensive overview of the current state of MPs pollution in the global environment and various solutions to address MP pollution by integrating applied technology, policy instruments, and legislation. This review critically evaluates and compares the existing technologies for MPs detection, removal, and degradation, and a variety of policy instruments and legislation that can support the prevention and management of MPs pollution scientifically. Furthermore, this review identifies the gaps and challenges in addressing the complex and diverse nature of MPs and calls for joint actions and collaboration from stakeholders to contain MPs. As water pollution by MPs is complex, managing it effectively requires their responses through the utilization of technology, policy instruments, and legislation. It is evident from a literature survey of 228 published articles (1961-2023) that existing water technologies are promising to remove MPs pollution. Membrane bioreactors and ultrafiltration achieved 90% of MPs removal, while magnetic separation was effective at extracting 88% of target MPs from wastewater. In biological process, one kg of wax worms could consume about 80 g of plastic/day. This means that 100 kg of wax worms can eat about 8 kg of plastic daily, or about 2.9 tons of plastic annually. Overall, the integration of technology, policy instrument, and legislation is crucial to deal with the MPs issues.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Unveiling the effect of microplastics on agricultural crops - a review

Microplastics (MPs), ever since they were identified as a potential and widely distributed persistent contaminant, the number of studies highlighting their impacts on various terrestrial ecosystems have been increasing. Recently, the effect of MPs on the agricultural ecosystem has gained momentum. Hence, the present review examines the impact of microplastics on agricultural crop systems and the mechanism underlying its toxicity. The current review revealed that most of the studies were conducted at a laboratory scale and under controlled conditions. Additionally, it was observed that polystyrene (PS) followed by polyethylene (PE) are the most studied polymer type, while the most studied plants are wheat and maize. Hitherto, literature studies suggest that the microplastics' influence on plant growth can be negative or sometimes neutral; while in some cases it exerts a hormetic effect which depends on other factors determining plant growth. Notably, the main mechanisms through which microplastics influence plant growth are mechanical damage, alteration of soil properties, or by leaching of additives. Overall, with burgeoning research interest in this aspect, the current review has significant implications for the toxicity of MPs on plants and throws light on the need to develop novel guidelines toward the sustainable use of plastics in agricultural sector. However, realistic field-level studies and estimating the MPs concentration at various region are essential to develop remediation approaches. Future studies should also focus on translocation and accumulation of micron sized MPs in edible portion of crops and their effect on food safety.

Effects of micro(nano)plastics on soil nutrient cycling: State of the knowledge

The ecological impacts of micro(nano)plastics (MNPs) have attracted attention worldwide because of their global occurrence, persistence, and environmental risks. Increasing evidence shows that MNPs can affect soil nutrient cycling, but the latest advances on this topic have not systematically reviewed. Here, we aim to present the state of knowledge about the effects of MNPs on soil nutrient cycling, particularly of C, N, and P. Using the latest data, the present review mainly focuses on three aspects, including (1) the effects and underlying mechanisms of MNPs on soil nutrient cycling, particularly of C, N and P, (2) the factors influencing the effects of MNPs on soil nutrient cycling, and (3) the knowledge gaps and future directions. We conclude that MNPs can alter soil nutrient cycling via mediating soil nutrient availability, soil enzyme activities, functional microbial communities, and their potential ecological functions. Furthermore, the effects of MNPs vary with MNPs characteristics (i.e., polymeric type, size, dosage, and shape), chemical additives, soil physicochemical conditions, and soil biota. Considering the complexity of MNP-soil interactions, multi-scale experiments using environmental relevant MNPs are required to shed light on the effects of MNPs on soil nutrients. By learning how MNPs influence soil nutrients cycles, this review can guide policy and management decisions to safeguard soil health and ensure sustainable agriculture and land use practices.

Microplastics in agriculture - a potential novel mechanism for the delivery of human pathogens onto crops

Mulching with plastic sheeting, the use of plastic carriers in seed coatings, and irrigation with wastewater or contaminated surface water have resulted in plastics, and microplastics, becoming ubiquitous in agricultural soils. Once in the environment, plastic surfaces quickly become colonised by microbial biofilm comprised of a diverse microbial community. This so-called 'plastisphere' community can also include human pathogens, particularly if the plastic has been exposed to faecal contamination (e.g., from wastewater or organic manures and livestock faeces). The plastisphere is hypothesised to facilitate the survival and dissemination of pathogens, and therefore plastics in agricultural systems could play a significant role in transferring human pathogens to crops, particularly as microplastics adhering to ready to eat crops are difficult to remove by washing. In this paper we critically discuss the pathways for human pathogens associated with microplastics to interact with crop leaves and roots, and the potential for the transfer, adherence, and uptake of human pathogens from the plastisphere to plants. Globally, the concentration of plastics in agricultural soils are increasing, therefore, quantifying the potential for the plastisphere to transfer human pathogens into the food chain needs to be treated as a priority.

Formation, behavior, properties and impact of micro- and nanoplastics on agricultural soil ecosystems (A Review)

Micro and nanoplastics (MPs and NPs, respectively) in agricultural soil ecosystems represent a pervasive global environmental concern, posing risks to soil biota, hence soil health and food security. This review provides a comprehensive and current summary of the literature on sources and properties of MNPs in agricultural ecosystems, methodology for the isolation and characterization of MNPs recovered from soil, MNP surrogate materials that mimic the size and properties of soil-borne MNPs, and transport of MNPs through the soil matrix. Furthermore, this review elucidates the impacts and risks of agricultural MNPs on crops and soil microorganisms and fauna. A significant source of MPs in soil is plasticulture, involving the use of mulch films and other plastic-based implements to provide several agronomic benefits for specialty crop production, while other sources of MPs include irrigation water and fertilizer. Long-term studies are needed to address current knowledge gaps of formation, soil surface and subsurface transport, and environmental impacts of MNPs, including for MNPs derived from biodegradable mulch films, which, although ultimately undergoing complete mineralization, will reside in soil for several months. Because of the complexity and variability of agricultural soil ecosystems and the difficulty in recovering MNPs from soil, a deeper understanding is needed for the fundamental relationships between MPs, NPs, soil biota and microbiota, including ecotoxicological effects of MNPs on earthworms, soil-dwelling invertebrates, and beneficial soil microorganisms, and soil geochemical attributes. In addition, the geometry, size distribution, fundamental and chemical properties, and concentration of MNPs contained in soils are required to develop surrogate MNP reference materials that can be used across laboratories for conducting fundamental laboratory studies.

Residential houses - a major point source of microplastic pollution: insights on the various sources, their transport, transformation, and toxicity behaviour

Municipal wastewater has been considered as one of the largest contributors and carriers of microplastics to the aquatic environment. However, the various residential activities that generate municipal wastewater are equally significant whenever the source of microplastics in aquatic system is accounted. However, so far, only municipal wastewater has received wide attention in previous review articles. Hence, this review article is written to address this gap by highlighting, firstly, the chances of microplastics arising from the usage of personal care products (PCPs), laundry washing, face masks, and other potential sources. Thereafter, the various factors influencing the generation and intensity of indoor microplastic pollution and the evidence available on the possibility of microplastic inhalation by humans and pet animals are explained. Followed by that, the removal efficiency of microplastics observed in wastewater treatment plants, the fate of microplastics present in the effluent and biosolids, and their impact on aquatic and soil environment are explored. Furthermore, the impact of aging on the characteristics of microsized plastics has been explored. Finally, the influence of age and size of microplastics on the toxicity effects and the factors impacting the retention and accumulation of microplastics in aquatic species are reviewed. Furthermore, the prominent pathway of microplastics into the human body and the studies available on the toxicity effects observed in human cells upon exposure to microplastics of different characteristics are explored.

Pretreatment methods for monitoring microplastics in soil and freshwater sediment samples: A comprehensive review

This paper reviews the currently used pretreatment methods for microplastics (MPs) analysis in soil and freshwater sediments, primarily sample processing, pretreatment, and characterization methods for MPs analysis. In addition, analytical tools (e.g., lab instruments), MPs characteristics, and MPs quantity, are included in this review. Prior to pretreatment, soil and sediment samples are typically processed using sieving and drying methods, and a sample quantity of <50 g was mostly used for the pretreatment. Density separation was commonly performed before organic matter removal. Sodium chloride (NaCl) and zinc chloride (ZnCl₂) were most often used for density separation, and hydrogen peroxide (H₂O₂) oxidation was most frequently used to remove organic matter. Although advantages of each pretreatment method have been investigated, it is still challenging to determine a universal pretreatment method due to sample variability (e.g., sample characteristics). Furthermore, it is highly required to establish standard pretreatment methods that can be used for various environmental matrices, including air, water, and wastes as well as soil and sediment.

Occurrence, characteristics, and removal of microplastics in wastewater treatment plants located on the Moroccan Atlantic: The case of Agadir metropolis

Wastewater treatment plants (WWTPs) are some of the main sources of microplastics (MPs) in the environment. However, studies on the occurrence and removal efficiency of MPs in WWTPs are still scarce, especially in African countries. Thus, the aim of this work was to study the abundance of MPs in the influent and effluent of two WWTPs (Aourir and M'zar) from the Agadir metropolis (Moroccan Atlantic). The two WWTPs receive different wastewater inputs (domestic and industrial). In addition, the impacts of seasonality on the fate and removal efficiency were investigated. The results showed that the MPs abundance in the wastewater decreased from 188 MPs/L in the influent to 50 MPs/L in the effluent for Aourir WWTP (domestic inputs); while the abundance was greater in the M'zar WWTP (urban and industrial inputs) recording a mean value of 519 MPs/L and 86 MPs/L in the influent and effluent, respectively. MPs collected in the Aourir WWTP ranged from 290 to 3200 μm, while MPs from the M'zar WWTP, ranged from 330 to 4200 μm. Overall, the size range of 100-500 μm was the most abundant for both WWTPs. Fibers were the highest MPs morphotype found, followed by fragments. MP colors were mainly red, black, blue, and transparent for both treatment plants. Additionally, FTIR spectroscopy showed the presence of eight different polymers, mainly polyethylene (PE), polypropylene (PP), and polystyrene (PS). Seasonal variation analysis showed that MPs abundance in summer was significantly higher compared to other seasons. However, the comparison of the removal efficiency (RE) between the different seasons indicated that the winter season (74 %) recorded the highest RE for Aourir WWTP. Conversely, spring (87 %) recorded the highest RE for M'zar WWTP. SEM/EDX micrographs showed different degrees of weathering and chemical elements adhering to the surface of the MPs. The findings of the current study will serve as a baseline for future considerations about management strategies, wastewater reuse, as well as the understanding of the occurrence of microplastic pollution along the marine ecosystems of Morocco.

Current levels and composition profiles of microplastics in irrigation water

Land-based sources have been considered the most important sources of microplastic pollution to the coastal and marine environment. The number of research studies examining microplastic pollution in freshwater and inland water systems is increasing, but most research focuses on rivers, reservoirs, and lakes. This study investigated the spatial-temporal distribution, characteristics, sources, and risks of microplastics in irrigation water in Taiwan. The results showed that microplastics were widely and unevenly distributed along the irrigation system and were abundant at sites surrounded by a dense population and sites that received lateral canal and urban runoff input. The abundance of microplastics ranged from 1.88 items/L to 141 items/L, and samples collected in May had the highest microplastic concentrations. Polypropylene, polyethylene, and polystyrene were identified as the predominant polymers. Fibers (36-64%) were the most typical and abundant shape, and 333-1000 μm size (49-63%) and white/transparent (45-51%) were the dominant size and colors among all samples. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to assess the impact of the rainy season and typhoons and addressed the dramatic changes in distinct population densities. The polymer risk index was calculated to evaluate the environmental risk of microplastics in irrigation water, and the results revealed a high microplastic risk throughout the year except in November and January. This study provided a valuable reference and impetus for a better understanding of the microplastic profile and source apportionment in irrigation water, which was important for environmental management.

Nanoplastics in the soil environment: Analytical methods, occurrence, fate and ecological implications

Soils play a very important role in ecosystems sustainability, either natural or agricultural ones, serving as an essential support for living organisms of different kinds. However, in the current context of extremely high plastic pollution, soils are highly threatened. Plastics can change the chemical and physical properties of the soils and may also affect the biota. Of particular importance is the fact that plastics can be fragmented into microplastics and, to a final extent into nanoplastics. Due to their extremely low size and high surface area, nanoplastics may even have a higher impact in soil ecosystems. Their transport through the edaphic environment is regulated by the physicochemical properties of the soil and plastic particles themselves, anthropic activities and biota interactions. Their degradation in soils is associated with a series of mechanical, photo-, thermo-, and bio-mediated transformations eventually conducive to their mineralisation. Their tiny size is precisely the main setback when it comes to sampling soils and subsequent processes for their identification and quantification, albeit pyrolysis coupled with gas chromatography-mass spectrometry and other spectroscopic techniques have proven to be useful for their analysis. Another issue as a consequence of their minuscule size lies in their uptake by plants roots and their ingestion by soil dwelling fauna, producing morphological deformations, damage to organs and physiological malfunctions, as well as the risks associated to their entrance in the food chain, although current conclusions are not always consistent and show the same pattern of effects. Thus, given the omnipresence and seriousness of the plastic menace, this review article pretends to provide a general overview of the most recent data available regarding nanoplastics determination, occurrence, fate and effects in soils, with special emphasis on their ecological implications.

Microplastics Derived from Food Packaging Waste-Their Origin and Health Risks

Plastics are commonly used for packaging in the food industry. The most popular thermoplastic materials that have found such applications are polyethylene (PE), polypropylene (PP), poly(ethylene terephthalate) (PET), and polystyrene (PS). Unfortunately, most plastic packaging is disposable. As a consequence, significant amounts of waste are generated, entering the environment, and undergoing degradation processes. They can occur under the influence of mechanical forces, temperature, light, chemical, and biological factors. These factors can present synergistic or antagonistic effects. As a result of their action, microplastics are formed, which can undergo further fragmentation and decomposition into small-molecule compounds. During the degradation process, various additives used at the plastics' processing stage can also be released. Both microplastics and additives can negatively affect human and animal health. Determination of the negative consequences of microplastics on the environment and health is not possible without knowing the course of degradation processes of packaging waste and their products. In this article, we present the sources of microplastics, the causes and places of their formation, the transport of such particles, the degradation of plastics most often used in the production of packaging for food storage, the factors affecting the said process, and its effects.

Can aged microplastics be transport vectors for organic micropollutants? - Sorption and phytotoxicity tests

Microplastics have been investigated over the last decade as potential transport vectors for other pollutants. However, the specific role of plastic aging, in which plastics change their characteristics over time when exposed to environmental agents, has been overlooked. Therefore, sorption experiments were herein conducted using virgin and aged (by ozone treatment or rooftop weathering) microplastic particles of LDPE - low-density polyethylene, PET - poly(ethylene terephthalate), or uPVC - unplasticized poly(vinyl chloride). The organic micropollutants (OMPs) selected as sorbates comprise a diversified group of priority substances and contaminants of emerging concern, including pharmaceutical substances (florfenicol, trimethoprim, diclofenac, tramadol, citalopram, venlafaxine) and pesticides (alachlor, clofibric acid, diuron, pentachlorophenol), analyzed at trace concentrations (each ≤100 μg L^-1). Sorption kinetics and equilibrium isotherms were obtained, as well as the confirmation that the aging degree of microplastics plays a major role in their sorption capacities. The results show an increased sorption of several OMPs on aged microplastics when compared to pristine samples, i.e. the sorption capacity increasing from one or two sorbed substances (maximum 3 μg g^-1 per sorbate) up to nine after aging (maximum 10 μg g^-1 per sorbate). The extent of sorption depends on the OMP, polymer and the effectiveness of the aging treatment. The modifications (e.g. in the chemical structure) between virgin and aged microplastics were linked to the increased sorption capacity of certain OMPs, allowing to better understand the different affinities observed. Additionally, phytotoxicity tests were performed to evaluate the mobility of the OMPs sorbed on the microplastics and the potential effects (on germination and early growth) of the combo on two species of plants (Lepidium sativum and Sinapis alba). These tests suggest low or no phytotoxicity effect under the conditions tested but indicate a need for further research on the behavior of microplastics on soil-plant systems.

Coronas of micro/nano plastics: a key determinant in their risk assessments

As an emerging pollutant in the life cycle of plastic products, micro/nanoplastics (M/NPs) are increasingly being released into the natural environment. Substantial concerns have been raised regarding the environmental and health impacts of M/NPs. Although diverse M/NPs have been detected in natural environment, most of them display two similar features, i.e.,high surface area and strong binding affinity, which enable extensive interactions between M/NPs and surrounding substances. This results in the formation of coronas, including eco-coronas and bio-coronas, on the plastic surface in different media. In real exposure scenarios, corona formation on M/NPs is inevitable and often displays variable and complex structures. The surface coronas have been found to impact the transportation, uptake, distribution, biotransformation and toxicity of particulates. Different from conventional toxins, packages on M/NPs rather than bare particles are more dangerous. We, therefore, recommend seriously consideration of the role of surface coronas in safety assessments. This review summarizes recent progress on the eco-coronas and bio-coronas of M/NPs, and further discusses the analytical methods to interpret corona structures, highlights the impacts of the corona on toxicity and provides future perspectives.

Deciphering the Mechanisms Shaping the Plastisphere Microbiota in Soil

The gradual accumulation of microplastics has aroused increasing concern for the unique niche, termed “plastisphere.” As research so far has focused on their characteristics in aquatic ecosystems, our understanding of the colonization and assembly of the attached bacterial communities on microplastics in soil ecosystems remains poor. Here, we aimed to characterize the plastisphere microbiomes of two types of microplastics (polylactic acid [PLA] and polyethylene [PE]) differing in their biodegradability in two different soils. After incubation for 60 days, considerably lower alpha diversity of bacterial community was observed on the microplastic surfaces, and prominent divergences occurred in the microbial community compositions between the plastisphere and the bulk soil. The temperature, rather than polymer type, significantly induced the differences between the plastisphere communities. The rRNA gene operon (rrn) copy numbers were significantly higher in the PLA plastisphere, suggesting potential degradation. The co-occurrence network analysis showed that the PE plastisphere exhibited greater network complexity and stronger stability than those in the PLA plastisphere. The stochasticity ratio indicated the remarkable importance of stochastic process on community assembly in PE and PLA plastispheres, while the null model analysis showed the nonnegligible roles of deterministic processes in shaping the plastisphere communities. Higher contributions of homogenous selection in the PLA plastisphere were observed in comparison with the PE plastisphere, which could probably be attributed to the selective pressure induced by microplastic degradation. Our findings enhance our mechanistic understanding of the diversity patterns and assembly processes of plastisphere in soil environments and have important implications for microbial ecology and microplastic risk assessment.

IMPORTANCE The increasing pervasive microplastic pollution is creating a new environmental compartment, termed plastisphere. Even though there was conclusive information characterizing the plastisphere, the underlying mechanisms shaping the bacterial communities in the plastisphere in the soil remain unclear. Therefore, we incubated two types of microplastics (PE and PLA) in two different soils and explored the differences between plastisphere and bulk soil communities. Additionally, the co-occurrence network and the assembly processes of plastisphere were subjected to further analysis. Our results highlight the importance of selective recruitment of microplastics and contribute to the understanding of the diversity patterns and assembly processes of plastisphere in soil environments.

Microplastics Determination in Gastrointestinal Tracts of European Sea Bass (Dicentrarchus labrax) and Gilt-Head Sea Bream (Sparus aurata) from Tenerife (Canary Islands, Spain)

Microplastic pollution has an extremely widespread distribution, to the extent that microplastics could be ingested by aquatic organisms, including species of commercial importance for fisheries and aquaculture. In this work, the anthropogenic particles content of the gastrointestinal tracts of 86 individuals of cultivated European sea bass (Dicentrarchus labrax, n = 45) and gilt-head sea bream (Sparus aurata, n = 41) from Tenerife (Canary Islands, Spain) was determined. Samples were bought at local markets and directly transported to the laboratory. After the dissection of the fishes and digestion of the gastrointestinal tracts in 10% KOH (w/v) at 60 °C for 24 h, the digests were filtered (50 µm stainless-steel mesh) and visualized under a stereomicroscope, finding that most of the items were colourless (47.7% for Dicentrarchus labrax and 60.9% for Sparus aurata) and blue (35.3% vs. 24.8%) microfibers, with an average length of 1957 ± 1699 µm and 1988 ± 1853 µm, respectively. Moreover, 15.3% of the microfibres were analysed by Fourier transform infrared spectroscopy, showing the prevalence of cellulosic fibres together with polyester, polyacrylonitrile, and poly(ether-urethane). This pattern (microplastics shapes, colours, sizes, and composition) clearly agrees with previous studies carried out in the Canary Islands region regarding the determination of microplastics in the marine environment.