Percarbonate mediated advanced oxidation completely degrades recalcitrant pesticide imidacloprid: Role of reactive oxygen species and transformation products

Attuning doped ZnO-based composites for an effective light-driven mineralization of pharmaceuticals via PMS activation

Water treatment technologies need to go beyond the current control of organic contaminants and ensure access to potable water. However, existing methods are still costly and often inadequate. In this context, novel catalysts that improve the mineralization degree of a wider range of pharmaceuticals through more benign and less consuming methodologies are highly sought after. ZnO, especially when doped, is a well-known semiconductor that also excels in the photocatalytic removal of persistent organic pollutants. In this study, we investigated the effect of doping ZnO nanoparticles with either copper, gallium or indium on the structure, morphology, photophysical properties and photocatalytic mineralization of pharmaceuticals. Their architecture was further improved through the fabrication of composites, pairing the best performing doped ZnO with either BaFe12O19 or nickel nanoparticles. Their suitability was tested on a complex 60-ppm multi-pollutant solution (tetracycline, levofloxacin and lansoprazole). The activation strategy combined photocatalysis with peroxymonosulfate (PMS) as an environmentally friendly source of highly oxidative sulfate radicals. The alliance of doped ZnO and BaFe12O19 was particularly successful, resulting in magnetic microcroquette-shaped composites with excellent inter-component synergy. In fact, indium outperformed the other proposed metal dopants, exceeding 97% mineralization after 1 h and achieving complete elimination after 3 h. All composites excelled in terms of reusability, with no catalytic loss after 10 consecutive cycles and minimal leakage of metal ions, highlighting their applicability in water remediation.

Inhalation bioaccessibility of imidacloprid in particulate matter: Implications for risk assessment during spraying

Adverse health outcomes due to the inhalation of pesticide residues in atmospheric particulate matter (PM) are gaining global attention. Quantitative health risk assessments of pesticide inhalation exposure highlight the need to understand the bioaccessibility of pesticide residues. Herein, the inhalation bioaccessibility of imidacloprid in PM was determined using three commonly used in vitro lung modeling methods (Artificial Lysosomal Fluid, Gamble Solution, and Simulated Lung Fluid). To validate its feasibility and effectiveness, we evaluated the bioavailability of imidacloprid using a mouse nasal instillation assay. The in vitro inhalation bioaccessibility of imidacloprid was extracted using Gamble Solution with a solid-liquid ratio of 1/1000, an oscillation rate of 150 r/min, and an extraction time of 24 h, showed a strong linear correlation with its in vivo liver-based bioavailability (R2 =0.8928). Moreover, the margin of exposure was incorporated into the inhalation exposure risk assessment, considering both formulations and nozzles. The inhalation unit exposure of imidacloprid for residents was 0.95-4.09 ng/m3. The margin of exposure for imidacloprid was determined to be acceptable when considering inhalation bioaccessibility. Taken together, these results indicate that the inhalation bioaccessibility of pesticides should be incorporated into assessments of human health risks posed by PM particles.

Optimizing the algae-bacteria biofilm reactor for imidacloprid wastewater treatment: An evaluation of hydraulic retention times for enhanced efficiency and energy savings

Recent observations have highlighted the rapidly growing prevalence of emerging contaminants such as Imidacloprid (IMI) within our environment. These insecticidal pollutants, coexisting with more traditional contaminants, have become predominant in aquatic systems, posing risks to both human and ecological well-being. Among the various wastewater treatment approaches tested, biofilm reactors are currently gaining prominence. In this study, we employed an Algae-Bacteria Biofilm Reactor (ABBR) to concurrently address both conventional and emergent contaminants, specifically IMI, over an extended timeframe. Following a 60-day assessment, the ABBR consistently demonstrated removal efficiencies exceeding 85% for total dissolved nitrogen, ammonia nitrogen, and total dissolved phosphorus, and also achieved removal efficacy for the soluble chemical oxygen demand (sCOD). Despite the removal efficiency of IMI (with initial concentration is 1.0 mg/L) in ABBR showed a gradual decline over the extended period, it remained consistently effective over 50% due to the microalgae-mediated free radical reactions, indicating the ABBR's sustained efficiency in long-duration operations. Additionally, applying some non-conventional modifications, like aeration removal and reducing light exposure, demonstrated minimal impact on the reactor's pollutant removal efficiencies, achieving comparable results to the control group (which utilized aeration with a 14:10 light/dark ratio), 0.92 kW h/L/d of electricity can be saved economically, which accentuated the potential for energy conservation. An in-depth analysis of the treated effluents from the ABBRs, using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) technique, uncovered four potential transformation pathways for IMI. Overall, our findings suggest that these optimized processes did not influence the transformation products of IMI, thereby reaffirming the viability of our proposed optimization.

Individual and social defenses in Apis mellifera: a playground to fight against synergistic stressor interactions

The honeybee is an important species for the agri-food and pharmaceutical industries through bee products and crop pollination services. However, honeybee health is a major concern, because beekeepers in many countries are experiencing significant colony losses. This phenomenon has been linked to the exposure of bees to multiple stresses in their environment. Indeed, several biotic and abiotic stressors interact with bees in a synergistic or antagonistic way. Synergistic stressors often act through a disruption of their defense systems (immune response or detoxification). Antagonistic interactions are most often caused by interactions between biotic stressors or disruptive activation of bee defenses. Honeybees have developed behavioral defense strategies and produce antimicrobial compounds to prevent exposure to various pathogens and chemicals. Expanding our knowledge about these processes could be used to develop strategies to shield bees from exposure. This review aims to describe current knowledge about the exposure of honeybees to multiple stresses and the defense mechanisms they have developed to protect themselves. The effect of multi-stress exposure is mainly due to a disruption of the immune response, detoxification, or an excessive defense response by the bee itself. In addition, bees have developed defenses against stressors, some behavioral, others involving the production of antimicrobials, or exploiting beneficial external factors.

Norfloxacin removal by ultraviolet-activated sodium percarbonate and sodium hypochlorite: process optimization and anion effect

The efficiency of UV-activated sodium percarbonate (SPC) and sodium hypochlorite (SHC) in Norfloxacin (Norf) removal from an aqueous solution was assessed. Control experiments were conducted and the synergistic effect of the UV-SHC and UV-SPC processes were 0.61 and 2.89, respectively. According to the first-order reaction rate constants, the process rates were ranked as UV-SPC > SPC > UV and UV-SHC > SHC > UV. Central composite design was applied to determine the optimum operating conditions for maximum Norf removal. Under optimum conditions (UV-SPC: 1 mg/L initial Norf, 4 mM SPC, pH 3, 50 min; UV-SHC: 1 mg/L initial Norf, 1 mM SHC, pH 7, 8 min), the removal yields for the UV-SPC and UV-SHC were 71.8 and 72.1%, respectively. HCO₃^-, Cl^-, NO₃^-, and SO₄^2- negatively affected both processes. UV-SPC and UV-SHC processes were effective for Norf removal from aqueous solution. Similar removal efficiencies were obtained with both processes; however, this removal efficiency was achieved in a much shorter time and more economically with the UV-SHC process.

Mechanism and security of UV driven sodium percarbonate for sulfamethoxazole degradation using DFT and metabolomic analysis

Recently, sodium percarbonate (SPC) as a solid substitute for H₂O₂ has aroused extensive attention in advanced oxidation processes. In current work, the degradation kinetics and mechanisms of antibiotic sulfamethoxazole (SMX) by ultraviolet (UV) driven SPC system were explored. The removal efficiency of SMX was enhanced as the increasing dosage of SPC. Moreover, hydroxyl radical (•OH), carbonate radical (CO₃^•-) and superoxide radical (O₂^•-) were verified to be presented by scavenger experiments and •OH, CO₃^•- exhibited a significant role in SMX degradation. Reactions mediated by these radicals were affected by anions and natural organic matters, implying that an incomplete mineralization of SMX would be ubiquitous. The screening four intermediates and transformation patterns of SMX were verified by DFT analysis. Metabolomic analysis demonstrated that a decreasing negative effect in E. coli after 24 h exposure was induced by intermediates products. In detail, SMX interfered in some key functional metabolic pathways including carbohydrate metabolism, pentose and glucuronate metabolism, nucleotide metabolism, arginine and proline metabolism, sphingolipid metabolism, which were mitigated after UV/SPC oxidation treatment, suggesting a declining environmental risk of SMX. This work provided new insights into biological impacts of SMX and its transformation products and vital guidance for SMX pollution control using UV/SPC technology.

Ball milling and acetic acid co-modified sludge biochar enhanced by electrochemistry to activate peroxymonosulfate for sustainable degradation of environmental concentration neonicotinoids

Neonicotinoids pose potential serious risks to human health even at environmental concentration and their removal from water is considered as a great challenge. A novel ball milling and acetic acid co-modified sludge biochar (BASBC) was the first time synthesized, which performed superior physicochemical characteristics including larger surface area, more defect structures and functional groups (e.g., CO and -OH). Electrochemistry was introduced to enhance BASBC for peroxymonosulfate (PMS) activation (E/BASBC/PMS) to degrade environmental concentration neonicotinoids (e.g., imidacloprid (IMI)). The degradation efficiency of IMI was 95.2% within 60 min (C₀ (PMS)= 1 mM, E= 25 V, m (BASBC)= 10 mg). Solution pH and anionic species/concentrations were critical affecting factors. The scavenging and electron paramagnetic resonance experiments suggested that ^•OH and ¹O₂ were the dominant reactive oxygen species contributing to IMI degradation. Three degradation pathways were proposed and pathway Ⅲ was the main one. 86.1% of IMI were mineralized into non-toxic CO₂ and H₂O, and others were converted into less toxic intermediates. Also, E/BASBC/PMS system achieved the sustainable degradation of IMI in the cycle experiments. Additionally, it exhibited excellent degradation performance for other three typical neonicotinoids (96.6% of thiacloprid (THI), 96.5% of thiamethoxam (THX) and 82.6% of clothianidin (CLO)) with high mineralization efficiencies (87.8% of THI, 90.5% of THX and 75.4% of CLO).

New combination of pulsed light and iron (II) for carbonate radical production to enhanced degradation of bisphenol A: Parameter optimization and degradation pathway

Bisphenol A(BPA) is a common industrial chemical with significant adverse impacts on Environment and human health. The present work evaluates the efficacy of pulsed light (PL) and Fe²⁺ ions in activation of sodium percarbonate (SPC) to produce hydroxyl (OH^•) and carbonate (CO₃^•-) radicals for efficient degradation of BPA. The effects of operational parameters such as solution pH, SPC and Fe²⁺ dose as well as the mixture composition were analyzed and the decomposition pathway of BPA proposed. The BPA was successfully degraded at the initial concentration of 15.0 mg/L and optimized conditions by the PL/Fe²⁺/SPC process (99.67 ± 0.29%). A rapid reduction in the degradation of BPA was observed with increasing pH due to OH^• radicals quenching and also the precipitation of Fe²⁺. Under the optimized conditions, degradation of BPA by PL/Fe²⁺/SPC process was five-times faster than the individual process. The quenching experiments revealed that radical and non-radical pathways on BPA degradation was accomplished with OH^•, CO₃^•-, O₂^•-, and ¹O_2, while OH^• and CO₃^•- radicals (as a dominant radicals) have the contributions of 80.23% and 8.30%, respectively. Based on the detected byproducts, ring cleavage can be considered as the main transformation mechanism of BPA by the PL/Fe²⁺/SPC process.

Electrochemical oxidation of fipronil pesticide is effective under environmental relevant concentrations

Pesticide overuse has posed a threat to agricultural community as well as for the environment. In order to treat this pollution at its source, decentralized and selective technologies such as electrochemical processes appear especially relevant to avoid the possible generation of toxic degradation products. Electrochemical oxidation (ECO) is a promising electrochemically-driven process, but most studies evaluate performance under pollutant concentrations that are orders of magnitude higher than environmental relevant conditions. This work explores ECO treatment of fipronil using boron-doped diamond (BDD) as anode and titanium plate as cathode at small concentrations found in agricultural run-off. The effect of applied current density and initial contaminant concentrations were also studied. For a current density of 20 mA cm^-2 the decrease of COD and fipronil were about 97% and 100% after 360 min of electrolysis, respectively. Engineering figures of merit were evaluated to assess competitiveness of ECO decentralized propositions. Results suggest effective and feasible treatment of fipronil by ECO.

UV activated sodium percarbonate to accelerate degradation of atrazine: Mechanism, intermediates, and evaluation on residual toxicity by metabolomics

Efficient and safe removal of widely used herbicides such as atrazine has become a recent hotspot. Herein, UV driven sodium percarbonate system (UV/SPC) was established to have many advantages in remediation of atrazine contamination. The mechanism and environmental risk of intermediates were explored, which provided information for the feasibility of UV/SPC. The degradation efficiency of atrazine was significantly enhanced as the increasing dosage of SPC. Quenching assay identified that •OH and CO3•- were committed to degrading atrazine. Humic acid and HPO42- remarkably inhibited atrazine degradation. Several intermediates were generated through the dealkylation, dechlorination-hydroxylation, alkylic-hydroxylation, alkyl oxidation and olefination reactions. Toxicity prediction proved that acute toxicity and bioaccumulation of intermediates were mitigated comparing with atrazine. Based on metabolomics results, the alteration of key metabolites such as citrate, L-kynurenine, malic acid, putrescine, glutamine, spermine, ethanolamine and phytosphingosine in various metabolic pathways of E.coli verified that the toxicity of atrazine was weakened after UV/SPC treatment. The application of UV/SPC on atrazine removal in real waters was influenced by environmental factors, and might be improved through coupling with other treatment technologies.

Sodium Percarbonate Activation by Plasma-Generated Ozone for Catalytic Degradation of Dye Wastewater: Role of Active Species and Degradation Process

In this paper, sodium percarbonate (SPC) was activated by ozone (O3) from plasma for catalytic treatment of dye wastewater. Methyl blue (MB), a typical industrial dye, was selected as the target dye contaminant. Results showed that enhancing O3 dosage and reducing MB concentration were beneficial to MB degradation. Compared to acid condition, a higher removal efficiency of MB was obtained in alkaline condition. With an increase of SPC dosage, the removal efficiency of MB first was raised, and then it declined. Under the optimal dosage of 50 mg/L, the removal efficiency of MB reached 85.7% with 30 min treatment time. The energy efficiency was improved from 5.21 g/kWh to 5.71 g/kWh. A synergetic effect can be established between O3 and SPC. Radical capture experiments verified that ·OH, ·O2−, 1O2, and ·CO3− played important parts in MB degradation. With increasing reaction time, the amount of total organic carbon (TOC) declined and the amount of ammonia nitrogen (NH3-N) increased. The addition of SPC enhanced the solution’s pH value and conductivity. The degradation pathway was proposed based on density functional theory (DFT) analysis and relevant literatures. The toxicity of MB was alleviated after O3/SPC treatment. The O3/SPC process was also suitable for the treatment of other dyes and actual wastewater.

Sustainable and effective degradation of aniline by sodium percarbonate activated with UV in aqueous solution: Kinetics, mechanism and identification of reactive species

In recent decades, sodium percarbonate (SPC) has been widely applied as a solid replacement for H₂O₂ in advanced oxidation process (AOPs). In this study, ultraviolet (UV) light was utilized for SPC activation to investigate the aniline degradation performance. The effects of SPC dosages and UV irradiation on aniline degradation were elaborated. The removal efficiency was significantly improved by increasing either the SPC dosage or UV irradiation intensity. Moreover, scavenging experiments showed that •OH, CO₃^•-, and O₂^•- were the predominant reactive species for aniline degradation. Meanwhile, the variation in the amount of •OH in the UV/SPC system was monitored, which revealed the dominant role of •OH. As a result, the mechanism of aniline degradation by the UV/SPC system was demonstrated based on confirmed free radicals. Furthermore, aniline degradation by the UV/H₂O₂ and UV/H₂O₂/Na₂CO₃ system were compared with the UV/SPC system, and an enhancement by the addition of Fe(II) in the UV/SPC system was verified. Aniline degradation was not significantly affected by the initial pH or the presence of Cl^-, SO₄^2- while NO₃^-, HCO₃^- and humid acid (HA) suppressed the reaction. In general, the UV/SPC system is a novel, green, and promising technology for aniline removal from aqueous solutions.

Biodegradation of imidacloprid: Molecular and kinetic analysis

Imidacloprid (C₉H₁₀ClN₅O₂) is the most widely used insecticide. Its persistence and toxic nature have caused a detrimental effect on living biota. Thus its removal from the contaminated environment has become imperative. The present study aimed to isolate bacterial species from pesticide-contaminated sites and assess their potential for biodegradation of imidacloprid. The 16S rRNA analysis revealed the genetic relatedness of isolates to Sphingobacterium sp., Agrobacterium sp., Pseudomonas sp., and Bacillus sp. Batch biodegradation studies showed that Sphingobacterium sp. and Agrobacterium sp. were the most promising isolates as they degraded 81.0% and 84.9%, respectively, of imidacloprid at the concentration of 95 mg/L via co-metabolism. Kinetic study (V_max/K_s ratio) also suggested the high degradation efficiency of these isolates. Imidacloprid-guanidine (C₉H₁₁ClN₄) was identified as the metabolite. This report highlights the potential of bacteria for imidacloprid degradation and could be utilized for the formulation of strategies for the remediation of imidacloprid contaminated environments.

Heterogeneous Advanced Oxidation Processes: Current Approaches for Wastewater Treatment

Nowadays, water pollution is one of the most dangerous environmental problems in the world. The presence of the so-called emerging pollutants in the different water bodies, impossible to eliminate through conventional biological and physical treatments used in wastewater treatment plants due to their persistent and recalcitrant nature, means that pollution continues growing throughout the world. The presence of these emerging pollutants involves serious risks to human and animal health for aquatic and terrestrial organisms. Therefore, in recent years, advanced oxidation processes (AOPs) have been postulated as a viable, innovative and efficient technology for the elimination of these types of compounds from water bodies. The oxidation/reduction reactions triggered in most of these processes require a suitable catalyst. The most recent research focuses on the use and development of different types of heterogeneous catalysts, which are capable of overcoming some of the operational limitations of homogeneous processes such as the generation of metallic sludge, difficult separation of treated water and narrow working pH. This review details the current advances in the field of heterogeneous AOPs, Fenton processes and photocatalysts for the removal of different types of emerging pollutants.

Unveiling the mechanism of imidacloprid removal by ferrate(VI): Kinetics, role of oxidation and adsorption, reaction pathway and toxicity assessment

Imidacloprid (IMI), an emerging pollutant, has high toxicity to non-target organisms. This paper presents the kinetics of IMI removal by ferrate(VI) at different pH (6.0-9.0), molar ratios ([ferrate(VI)]:[IMI]) and added Fe(III) ions. The apparent second-order rate constant (k_app) decreased with increase in pH from pH 6.0 to 9.0 (i.e., (1.2 ± 0.1) × 10² M^-1 s^-1 to (8.3 ± 0.3) M^-1 s^-1). The species-specific rate constants were obtained as k (HFeO₄^-) = 1.3 × 10² M^-1 s^-1 and k (FeO₄^2-) = 6.9 M^-1 s^-1. The decreases in the concentration of HFeO₄^- with increase in pH caused the observed pH dependence in k_app. At pH 7.0, the removal of IMI increased with the molar ratio from 1.0 to 10.0 with complete removal at the highest ratio. The variation in pH from 6.0 to 9.0 had no obvious effect on removal of IMI. Experiments indicate that IMI removal is mainly by ferrate(VI) oxidation and to a lesser extent by Fe(III) adsorption. Mineralization of IMI was also observed (20-26%). The addition of Fe(III) ions to ferrate(VI)-IMI at pH 7.0 and 8.0 resulted in enhanced removal of IMI, but the presence of Ca²⁺, SO₄^2-, HCO₃^-, and humic acid (HA) has negative effects. The presence of coexisting substances in river water slightly decreased IMI removal by ferrate(VI) by less than 10%. Identification of products and frontier electron density (FED) calculations demonstrated involvement of opening of the five-membered heterocyclic moiety of IMI by ferrate(VI). Toxicity assessment with NIH 3T3 fibroblasts and ECOSAR analysis indicated lower toxicity of oxidized products than parent IMI.

Electrochemically-driven regeneration of iron (II) enhances Fenton abatement of pesticide cartap

Cartap is a carbamate insecticide intended to protect crops such as rice, tea, and sugarcane. Cartap in the environment presents a serious threat to non-target organisms through direct exposure or via biomagnification. Electro-assisted Fenton technology taps the potential of Fenton reagents to degrade cartap. Electrochemical reduction of iron accelerates catalyst regeneration. Cartap degradation was first investigated by varying reaction pH, as well as the initial H₂O₂ and Fe²⁺ dosage, followed by optimization studies using central composite design. Parametric results indicate the highest cartap removal of 98.10% was achieved at 1.6 pH, 3.0 mM Fe²⁺_, and 40 mM H₂O₂ at I = 1.0 A and t = 30 min. These results notoriously surpass conventional Fenton that only achieved 53.8% cartap removal under similar conditions. The hybridization of Fenton process through electrochemical regeneration enhances removal and increases degradation kinetic up to a pseudo-first-order rate constant value of 21.30 × 10^-4 s^-1. Effects of coexisting inorganic salts PO₄^3-, NO₃^-, and Cl^- at 1 mM and 10 mM concentrations were investigated. These results demonstrate that Fenton electrification as process intensification alternative can enhance the performance and competitiveness of conventional Fenton by ensuring higher availability of iron catalyst while minimizing sludge production.

Coagulation combined with ultraviolet irradiation activated sodium percarbonate as pretreatment prior to ultrafiltration: Analysis of free radical oxidation mechanism and membrane fouling control

Novel pre-coagulation-sedimentation integrated with ultraviolet activated sodium percarbonate (SPC) (Fe(III)-UV/SPC) processes are promising methods for ultrafiltration (UF) pretreatment to ensure the safety of rural drinking water and mitigate UF membrane fouling. The process of surface water purification using the integrated coagulation-advanced oxidation processes (AOPs)-UF system relies on the idea that pre-coagulation can remove hydrophobic macromolecular organic compounds, thus facilitating the oxidation of hydrophilic molecules or medium-sized macromolecules to improve the utilization efficiency of free radicals in AOPs. Compared with the UV/SPC process, the removal rates of UV₂₅₄ and DOC in the Fe(III)-UV/SPC process (Fe(III) = 0.1 mM, SPC = 0.5 mM) were increased from 87.39 % to 41.45 %-93.56 % and 52.51 %, respectively. Furthermore, the dosage of SPC was reduced from 0.75 mM in UV/SPC process to 0.5 mM due to effects of pre-coagulation. The free radical quenching experiment showed that a significant radical sink of reactions with organic contaminants was formed by •OH and CO₃^•- in the UV/SPC process, rather than a single specific radical. The destruction of the cake layer structure, reduction in contaminant concentration, and appearance of many permeable holes on the membrane surface were the main reasons for the alleviation of UF membrane fouling. Finally, the trans-membrane pressure and reversible membrane resistance decreased from 22.33 kPa to 3.68 × 10¹¹ m^-1 to 18.28 kPa and 0.93 × 10¹¹ m^-1, respectively. These results provide new insights into the behavior of membrane fouling control and offer technical references for the long-term stable operation of the UF process.

Degradation of norfloxacin by calcite activating peroxymonosulfate: Performance and mechanism

In this study, calcite was investigated as an activator for the norfloxacin (NOR) degradation by peroxymonosulfate (PMS). Under optimum conditions, the NOR removal percentage was 99.7% within 60 min, and the pseudo-first-order kinetics effectively described the two-stage oxidation process. The NOR removal percentage improved from 10.4% to 91.5% and the reaction rate constant elevated from 0.0010 to 0.1217 min^-1 when 0.5 g/L calcite was added compared to that without calcite addition. Furthermore, the results of radical scavenger and electron spin resonance trapping indicated that the favorable alkaline environment and a proper level of carbonate in the Calcite/PMS system facilitated the activation of PMS to generate ¹O₂ for rapid NOR degradation. Compared with NaOH, calcite was able to maintain the pH (8-9) of the reaction system stable. Besides, the content of anions with buffering capacity and organic matter in the water matrix influenced the removal percentage of NOR. Seven intermediates were identified and the NOR degradation pathways were suggested. The findings of this research provided an environmentally friendly activator for remediation of organic wastewater and deepened the understanding of the interaction between calcium carbonate and PMS.

Electrochemical activation of peroxides for treatment of contaminated water with landfill leachate: Efficacy, toxicity and biodegradability evaluation

Contaminated water with landfill leachate (CWLL) with high salinity and high organic content (total organic carbon (TOC) = 649 mg/L and Chemical Oxygen Demand (COD) = 1175 mg/L) is a toxic and non-biodegradable effluent. The present research aimed to assess the treatment effectiveness of CWLL by electrocoagulation (EC)/oxidant process. The ferrous ions generated during the process were employed as coagulant and catalyst for the activation of different oxidants such as peroxymonosulfate (PMS), peroxydisulfate (PDS), hydrogen peroxide (HP), and percarbonate (PC) to decrease TOC in CWLL. Removal of ammonia, color, phosphorous, and chemical oxygen demand (COD) from CWLL effluent was explored at various processes. EC/HP had the best performance (∼73%) in mineralization of organic pollutants compared to others under the condition of pH 6.8, applied current of 200 mA, oxidant dosage of 6 mM, and time of 80 min. The oxidation priority was to follow this order: EC/HP > EC/PMS > EC/PDS > EC/PC. These processes enhanced the biodegradability of CWLL based on the average oxidation state and biochemical oxygen demand (BOD)/COD ratio. SUVA₂₅₄ and E₂/E₃ indices were also investigated on obtained effluents. The phytotoxicity evaluation was carried out based on the germination index, indicating that the electro-activated oxidant was an effective system to reduce the toxicity of polluted waters. EC/HP showed supremacy compared to others in terms of efficiency, cost, and detoxification. Therefore, the electro-activated oxidant system is a good means for removing organic pollutants from real wastewater.

Infrared-Light-Responsive Controlled-Release Pesticide Using Hollow Carbon Microspheres@Polyethylene Glycol/α-Cyclodextrin Gel

Controlled release of pesticides by light regulation is one of the most viable strategies recently developed for the highly efficient utilization of agrochemicals. Herein, we report an infrared-light-responsive pesticide delivery system for the controlled release of imidacloprid (IMI) by preparation of functional hollow carbon microspheres (HCMs). After IMI loading and surface functionalization with polyethylene glycol (PEG) and α-cyclodextrin (α-CD), IMI was sequestered in the pesticide system (denoted as HCMs/IMI/PEG/α-CD) as a result of the formation of a PEG/α-CD gel network. Upon the irradiation of infrared light, HCMs with high photothermal conversion efficiency (42.8%) raised the local temperature effectively, leading to the collapse of the gel network and the release of IMI. In comparison to the amount of pesticide release (29%) under sunlight, it could reach 77% driven by infrared light, which was an intriguing improvement. Consequently, HCMs/IMI/PEG/α-CD under infrared light showed significantly higher pest control efficacy on corn borers by 125% than itself alone. This work provides a promising method to intentionally regulate pesticide release and enhance utilization efficiency.

An insight into the bioelectrochemical photoreduction of CO2 to value-added chemicals

Goal of sustainable carbon neutral economy can be achieved by designing an efficient CO₂ reduction system to generate biofuels, in particular, by mimicking the mechanism of natural photosynthesis using semiconducting nanomaterials interfaced with electroactive bacteria (EAB) in a photosynthetic microbial electrosynthesis (PMES) system. This review paper presents an overview of the recent advancements in the biohybrid photoanode and photocathode materials. We discuss the reaction mechanism observed at photoanode and photocathode to enhance our understanding on the solar driven MES. We extend the discussion by showcasing the potential activity of EABs toward high selectivity and production rates for desirable products by manipulating their genomic sequence. Additionally, the critical challenges associated in scaling up the PMES system including the strategies for diminution of reactive oxygen species, low solubility of CO₂ in the typical electrolytes, low selectivity of product species are presented along with the suggestions of alternative strategies to achieve economically viable generation of (bio)commodities.

Roles of hydroxyl and carbonate radicals in bisphenol a degradation via a nanoscale zero-valent iron/percarbonate system: influencing factors and mechanisms

In this work, nanoscale-zero-valent iron (nZVI) was applied to activate sodium percarbonate (SPC) to eliminate bisphenol A (BPA), which poses a risk to ecological and human health as a typical endocrine disruptor. The influence of nZVI loading, SPC dosing, initial pH, and the presence of inorganic anions (including Cl-, HPO4 2-, NO3 - and NO2 -) and humic acid on BPA removal by the nZVI/SPC system were investigated. Based on the scavenger test results, ˙OH and CO3˙- participated in the degradation of BPA, and ˙OH was illustrated to be the dominant radical. The X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis suggested that surface iron oxide generation, electron transfer and Fe2+ release were the main processes of the SPC activation by nZVI. Moreover, BPA transformation products were detected by LC-MS allowing the proposal of a possible degradation pathway of BPA. Along with the degradation of the parent compound BPA, the total organic carbon (TOC) gradually decreased, while the bio-toxicity increased at the initial stage of the reaction (0-3 min) and then decreased to a lower level rapidly at 20 min. Overall, this study evidenced the feasibility of the nZVI/SPC system to efficiently degrade BPA, broadening the applications of nZVI in wastewater treatment.

Chitosan functionalized AgNPs for efficient removal of Imidacloprid pesticide through a pressure-free design

Wide dissemination of pesticides for protecting plants against pests has resulted in high production of un-infected crops but higher environmental pollution. High percentages of pesticides are released to the environment and finally use water as the final destination. The current study is concerning by removal of Imidacloprid pesticide from water using pressure-free passage through polymeric membrane integrated design. Both of chitosan and chitosan functionalized silver nanoparticles (AgNPs @chitosan) membranes were prepared, characterized and applied as adsorbent matrix for Imidacloprid. SEM, TEM and PSA analysis revealed the biosynthesis of AgNPs in the range of 25-50 nm. However, SEM and FTIR analysis revealed the proper formation of chitosan membrane and its proper functionalization with silver nanoparticles. Both of chitosan and AgNPs @chitosan membranes succeeded to remove 40 and 85% of Imidacloprid at slightly acidic pH, respectively. Moreover, the amount of removed Imidacloprid was proportional with the amount of its initial concentration indicating the successful removal of Imidacloprid by AgNPs @chitosan membrane even at higher pesticide concentrations. The obtained results indicate the promising use of AgNPs @chitosan membranes for removal of Imidacloprid pesticide from contaminated water depending on the pressure-free design that lacks external energy support.