Defects regulating of graphene ink for electrochemical determination of ascorbic acid, dopamine and uric acid

Preparation of 3D nano silver trees/sea urchin-like gold and SERS detection of uric acid

In this paper, 3D nano-silver trees/sea urchin-like gold Surface Enhanced Raman Spectroscopy (SERS) substrates were prepared by chemical reduction method, characterized by SEM, EDS, UV-Vis and XRD et.al, and the preparation process was optimized using Rhodamine B (RB) as the Raman signal molecule. The SERS characteristics of Uric Acid on this substrate were investigated and the results showed that the SERS substrate had a Raman enhancement factor of 1.9 × 107 for RB, and also had a significant Raman enhancement effect on Uric Acid. The SERS intensity (ISERS) at 1400 cm-1 showed a good linear relationship with the logarithm value of uric acid concentration (log C) between the range of 5 × 10-4 M to 1 × 10-7 M. The linear fitting equation was ISERS = 890 (log C) + 8066 (R2 = 0.983), and the LOD = 2.8 × 10-8 M. The spiked test was performed in human serum with recoveries ranging from 82.86% to 125.13% and RSD (n = 3) < 3.5%.

High Sensitivity Electrochemical As (III) Sensor Based on Fe3O4/MoS2 Nanocomposites

Currently, heavy metal ion pollution in water is becoming more and more common, especially As (III), which is a serious threat to human health. In this experiment, a glassy carbon electrode modified with Fe3O4/MoS2 nanocomposites was used to select the square wave voltammetry (SWV) electrochemical detection method for the detection of trace As (III) in water. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) showed that Fe3O4 nanoparticles were uniformly attached to the surface of MoS2 and were not easily agglomerated. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) showed that Fe3O4/MoS2 has higher sensitivity and conductivity. After optimizing the experimental conditions, the Fe3O4/MoS2-modified glassy carbon electrode exhibited high sensitivity (3.67 μA/ppb) and a low detection limit (0.70 ppb), as well as excellent interference resistance and stability for As (III).

Dual-template molecularly surface imprinted polymer on fluorescent metal-organic frameworks functionalized with carbon dots for ascorbic acid and uric acid detection

In this work, dual-template molecularly imprinted polymer surfaces imprinted on blue fluorescent Cr-based MOF (Cr-MOF) functionalized with yellow emissive carbon dots (Y-CDs) were prepared using l-ascorbic acid (AA) and uric acid (UA) as templates for simultaneous selective recognition of AA and UA. The as-prepared nanocomposite probe (Y-CDs/Cr-MOF@MIP) contains two recognition site cavities and emits a dual well-resolved fluorescence spectra when excited at 390 nm; blue emission (λ_em 450 nm) is due to Cr-MOF, and yellow emission (λ_em 560 nm) is due to Y-CDs. The yellow fluorescence emission of Y-CDs was quenched upon the addition of ascorbic acid, while Cr-MOF's emission remained unaffected. In the same way, the blue fluorescence emission of the Cr-MOFs was quenched in the presence of uric acid, while the yellow emission remained constant. Both emissions were quenched in a sample containing both AA and UA. This can be exploited to design a dual-template biosensor to detect UA and AA simultaneously. The Y-CDs/Cr-MOF@MIP sensor displayed a dynamic linear response for AA in the range 25.0 µM - 425.0 µM with a detection limit of 1.30 µM, and for UA in the range 25.0 µM - 425.0 µM with a detection limit of 1.10 µM. The dual-target probe Y-CDs/Cr-MOF@MIP was highly selective and sensitive for the detection of UA and AA in human urine samples due to the selectivity of the two recognition sites.

Highly Sensitive and Selective Dopamine Determination in Real Samples Using Au Nanoparticles Decorated Marimo-like Graphene Microbead-Based Electrochemical Sensors

A sensitive and selective electrochemical dopamine (DA) sensor has been developed using gold nanoparticles decorated marimo-like graphene (Au NP/MG) as a modifier of the glassy carbon electrode (GCE). Marimo-like graphene (MG) was prepared by partial exfoliation on the mesocarbon microbeads (MCMB) through molten KOH intercalation. Characterization via transmission electron microscopy confirmed that the surface of MG is composed of multi-layer graphene nanowalls. The graphene nanowalls structure of MG provided abundant surface area and electroactive sites. Electrochemical properties of Au NP/MG/GCE electrode were investigated by cyclic voltammetry and differential pulse voltammetry techniques. The electrode exhibited high electrochemical activity towards DA oxidation. The oxidation peak current increased linearly in proportion to the DA concentration in a range from 0.02 to 10 μM with a detection limit of 0.016 μM. The detection selectivity was carried out with the presence of 20 μM uric acid in goat serum real samples. This study demonstrated a promising method to fabricate DA sensor-based on MCMB derivatives as electrochemical modifiers.

GO/ZnO nanocomposite - as transducer platform for electrochemical sensing towards environmental applications

Graphene Oxide-Zinc Oxide (GO-ZnO) - a new nanomaterial that has queued the interest of researchers. Their intriguing promising physical and electrochemical features of electrode material have led to its widespread use in electrochemical sensor applications. GO-ZnO based nanomaterial were extensively exploited in the construction of electrochemical sensors due to their adaptability and distinct qualities. On understanding the structural role of these materials, their modification processes are critical for realizing their full potential. The advancement of technology on new concepts and strategies has revolutionized the field of sensor devices with high sensitivities and selectivity. These tools can test a range of contaminants quickly, accurately, and affordably while performing automated chemical analysis in complicated matrices. This paper highlights the electrochemical transducer surface for sensing various analytes and current research activity on GO-ZnO nanocomposite. Additionally, we talked about current developments in GO-ZnO nanostructured composites to identify relevant analytes (i.e., Nitrophenols, Antibiotic Drugs, Biomolecules). While being used in the laboratory, the majority of produced systems have proven to bring about excellent gains. Their monitoring application still has a long way to go before it is fixed due to problems like technological advancements and multifunctional strategies to get around the challenges for improving the sensing systems.

The Roadmap of Graphene-Based Sensors: Electrochemical Methods for Bioanalytical Applications

Graphene (GR) has engrossed immense research attention as an emerging carbon material owing to its enthralling electrochemical (EC) and physical properties. Herein, we debate the role of GR-based nanomaterials (NMs) in refining EC sensing performance toward bioanalytes detection. Following the introduction, we briefly discuss the GR fabrication, properties, application as electrode materials, the principle of EC sensing system, and the importance of bioanalytes detection in early disease diagnosis. Along with the brief description of GR-derivatives, simulation, and doping, classification of GR-based EC sensors such as cancer biomarkers, neurotransmitters, DNA sensors, immunosensors, and various other bioanalytes detection is provided. The working mechanism of topical GR-based EC sensors, advantages, and real-time analysis of these along with details of analytical merit of figures for EC sensors are discussed. Last, we have concluded the review by providing some suggestions to overcome the existing downsides of GR-based sensors and future outlook. The advancement of electrochemistry, nanotechnology, and point-of-care (POC) devices could offer the next generation of precise, sensitive, and reliable EC sensors.

Changes in and Recognition of Electrochemical Fingerprints of Acer spp. in Different Seasons

Electroanalytical chemistry is a metrological analysis technique that provides information feedback by measuring the voltammetric signal that changes when a molecule is involved in an electrochemical reaction. There is variability in the type and content of electrochemically active substances among different plants, and the signal differences presented by such differences in electrochemical reactions can be used for plant identification and physiological monitoring. This work used electroanalytical chemistry to monitor the growth of three Acer spp. This work explores the feasibility of the electrochemical analysis technique for the physiological monitoring of highly differentiated plants within the genus and further validates the technique. Changes in the electrochemical fingerprints of A. cinnamomifolium, A. sinopurpurascens and A. palmatum 'Matsumurae' were recorded during the one-year developmental cycle. The results show that the differences in the electrochemical fingerprint profiles of Acer spp. can be used to distinguish different species and identify the growth status in each season. This work also concludes with an identification flowchart based on electrochemical fingerprinting.

A scientometric study on application of electrochemical sensors for detection of pesticide using graphene-based electrode modifiers

Pesticide testing is an important topic in environmental protection and food safety. The development of green, accurate and reliable pesticide residue detection methods is an important technical support for implementing of agricultural quality supervision. Electrochemical sensors are a very promising analytical method for pesticide detection due to their high sensitivity, speed, low cost and portability. Performance enhancement of electrochemical sensors is often accompanied by research advances in materials science. Among them, carbon material is a very important electrode material for the fabrication of electrochemical sensors. The discovery of graphene makes it the most promising candidate among carbon materials for sensor performance enhancement. The topic of this review is the use of graphene-modified electrochemical sensors for pesticide detection in the last decade. Traditional literature summaries and bibliometric analyses were used for an in-depth analysis of this topic. In addition to the introduction of different sensor types and performance comparisons, this review also parses the authors' country, keywords and publication frequency. The related research experienced rapid growth several years ago and has now reached a relatively stable stage. We also discuss the perspectives on this topic.

A Simple, Cost-Effective, and Green HPTLC Method for the Estimation of Ascorbic Acid in Solvent and Ultrasound-Assisted Extracts of Phyllanthus emblica, Capsicum annuum, and Psidium guajava

Greener analytical methodologies for the estimation of ascorbic acid (AA) are poorly reported in the literature. Furthermore, the green indexes of the literature’s analytical assays of AA estimation have not been assessed. As a consequence, the aim of this research is to invent and validate a simple, cost-effective, and green reverse-phase “high-performance thin-layer chromatography (HPTLC)” method for the estimating AA in the solvent extracts (SE) and ultrasound-assisted extracts (UAE) of Phyllanthus emblica, Psidium guajava, and Capsicum annuum. The greener mobile phase for AA estimation was a binary mixture of water and ethanol (70:30, v/v). At a wavelength of 265 nm, the detection of AA was carried out. The greener HPTLC technique was linear in the 25–1200 ng/band range. In addition, the method was simple, cost-effective, accurate, precise, robust, sensitive, and green. The amount of AA was highest in the SE and UAE of P. emblica compared to the SE and UAE of P. guajava and C. annuum. The amount of AA in the SE of P. emblica, P. guajava, and C. annuum was found to be 491.16, 168.91, and 144.30 mg/100 g, respectively. However, the amount of AA in the UAE of P. emblica, P. guajava, and C. annuum was found to be 673.02, 218.71, and 199.30 mg/100 g, respectively. Using the “analytical GREEnness (AGREE)” methodology, the greenness index for the developed method was calculated to be 0.88, showing that the developed method has an excellent green profile. When it came to extracting AA, the UAE method outperformed the SE method. These findings suggested that the developed method might be used to estimate the AA in a variety of vegetable crops, plant-based extracts, and commercial formulations. Furthermore, because of the use of greener solvent systems against the commonly utilized hazardous solvent systems for AA determination, this technique is also safe and sustainable.

Bottom-Up Evolution of Diamond-Graphite Hybrid Two-Dimensional Nanostructure: Underlying Picture and Electrochemical Activity

The diamond-graphite hybrid thin film with low-dimensional nanostructure (e.g., nitrogen-included ultrananocrystalline diamond (N-UNCD) or the alike), has been employed in many impactful breakthrough applications. However, the detailed picture behind the bottom-up evolution of such intriguing carbon nanostructure is far from clarified yet. Here, the authors clarify it, through the concerted efforts of microscopic, physical, and electrochemical analyses for a series of samples synthesized by hot-filament chemical vapor deposition using methane-hydrogen precursor gas, based on the hydrogen-dependent surface reconstruction of nanodiamond and on the substrate-temperature-dependent variation of the growth species (atomic hydrogen and methyl radical) concentration near substrate. The clarified picture provides insights for a drastic enhancement in the electrochemical activities of the hybrid thin film, concerning the detection of important biomolecule, that is, ascorbic acid, uric acid, and dopamine: their limits of detections are 490, 35, and 25 nm, respectively, which are among the best of the all-carbon thin film electrodes in the literature. This work also enables a simple and effective way of strongly enhancing AA detection.

Construction of cationic polyfluorinated azobenzene/reduced graphene oxide for simultaneous determination of dopamine, uric acid and ascorbic acid

A highly sensitive cationic polyfluorinated azobenzene/reduced graphene oxide (C₃F₇-azo⁺/RGO) nanocomposite electrochemical sensor for simultaneous detection of dopamine (DA), ascorbic acid (AA) and uric acid (UA) was successfully synthesized using a facile exfoliation/restacking method. The nanocomposite is self-assembled from oppositely charged graphene oxide nanosheets (GO) and polyfluorinated azobenzene cations (C₃F₇-azo⁺), and then obtained by electrochemical reduction. The structure and electrochemical properties were characterized by X-ray diffraction (XRD), energy dispersive spectrometer analysis (EDS), transmission electron microscope (TEM) and scanning electron microscope (SEM). The electrochemical property of C₃F₇-azo⁺/RGO was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). It can be clearly seen from experimental results that C₃F₇-azo⁺/RGO-modified electrode (C₃F₇-azo⁺/RGO/GCE) can detect DA, AA and UA simultaneously, and has good stability and anti-interference performance. The detection limits are 65 nM, 8 nM and 11 nM for DA, AA and UA in the ranges 57.28-134.28 μM, 0.04-6.01 μM, 9.23-23.45 μM, respectively.

Achievements of Graphene and Its Derivatives Materials on Electrochemical Drug Assays and Drug-DNA Interactions

Graphene, emerging as a true two-dimensional (2D) material, has attracted increasing attention due to its unique physical and electrochemical properties such as high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass production. The entire scientific community recognizes the significance and potential impact of graphene. Electrochemical detection strategies have advantages such as being simple, fast, and low-cost. The use of graphene as an excellent interface for electrode modification provides a promising way to construct more sensitive and stable electrochemical (bio)sensors. The review presents sensors based on graphene and its derivatives for electrochemical drug assays from pharmaceutical dosage forms and biological samples. Future perspectives in this rapidly developing field are also discussed. In addition, the interaction of several important anticancer drug molecules with deoxyribonucleic acid (DNA) that was immobilized onto graphene-modified electrodes has been detailed in terms of dosage regulation and utility purposes.

Biometric Identification of Taxodium spp. and Their Hybrid Progenies by Electrochemical Fingerprints

The use of electrochemical fingerprints for plant identification is an emerging application in biosensors. In this work, Taxodium ascendens, T. distichum, T. mucronatum, and 18 of their hybrid progenies were collected for this purpose. This is the first attempt to use electrochemical fingerprinting for the identification of plant hybrid progeny. Electrochemical fingerprinting in the leaves of Taxodium spp. was recorded under two conditions. The results showed that the electrochemical fingerprints of each species and progeny possessed very suitable reproducibility. These electrochemical fingerprints represent the electrochemical behavior of electrochemically active substances in leaf tissues under specific conditions. Since these species and progenies are very closely related to each other, it is challenging to identify them directly using a particular electrochemical fingerprinting. Therefore, electrochemical fingerprints measured under different conditions were used to perform pattern recognition. We can identify different species and progenies by locating the features in different pattern maps. We also performed a phylogenetic study with data from electrochemical fingerprinting. The results proved that the electrochemical classification results and the relationship between them are closely related.

A selective sensing platform for the simultaneous detection of ascorbic acid, dopamine, and uric acid based on AuNPs/carboxylated COFs/Poly(fuchsin basic) film

In this study, an electrochemical sensing strategy was developed based on the synergies of gold nanoparticles (AuNPs) doped carboxylated covalent organic frameworks (ACOFs) and poly(fuchsin basic) film for the simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA). This strategy not only took advantage of the adopted materials but also made use of the H-bonding and electrostatic interaction between the three compounds and materials. For this sensing, a poly-BFu film was formed on the surface of bare glass carbon electrode (GCE) under a constant potential. AuNPs was highly dispersed and immobilized on the constructed ACOF-TaTp to obtain AuNPs@ACOF. The constructed sensor AuNPs@ACOF/p-BFu/GCE combined the merits of high surface area, hydrophilicity, conductivity, and selective affinity, consequently exhibiting high sensitivity and selectivity toward the simultaneous detection of AA, DA, and UA with wide linear response ranges of 25-1500 μM, 0.75-40 μM, and 1-200 μM, respectively. The corresponding detection limits were 12.0 μM, 0.15 μM, and 0.22 μM. The simultaneous determination of UA in real human urine sample further confirmed the practicability of the designed electrode.

Conductive Hydrogel-Based Electrochemical Sensor: A Soft Platform for Capturing Analyte

Electrode modifications for electrochemical sensors attract a lot of attention every year. Among them, hydrogels are a relatively special class of electrode modifier. Since hydrogels often contain polymers, even though they are conductive polymers, they are not ideal electrode modifiers because of their poor conductivity. However, the micro-aqueous environment and the three-dimensional structure of hydrogels are an excellent platform for immobilizing bioactive molecules and maintaining their activity. This gives the hydrogel-modified electrochemical sensor the potential to perform specific recognition. At the same time, the rapid development of nanomaterials also makes the composite hydrogel have good electrical conductivity. This has led many scientists to become interested in hydrogel-based electrochemical sensors. In this review, we summarize the development process of hydrogel-based electrochemical sensors, starting from 2000. Hydrogel-based electrochemical sensors were initially used only as a carrier for biomolecules, mostly for loading enzymes and for specific recognition. With the widespread use of noble metal nanoparticles and carbon materials, hydrogels can now be used to prepare enzyme-free sensors. Although there are some sporadic studies on the use of hydrogels for practical applications, the vast majority of reports are still limited to the detection of common model molecules, such as glucose and H2O2. In the review, we classify hydrogels according to their different conducting strategies, and present the current status of the application of different hydrogels in electrochemical sensors. We also summarize the advantages and shortcomings of hydrogel-based electrochemical sensors. In addition, future prospects regarding hydrogel for electrochemical sensor use have been provided at the end.

An Analytical Method Based on Electrochemical Sensor for the Assessment of Insect Infestation in Flour

Uric acid is an important indicator of the insect infestation assessment in flour. In this work, we propose a method for uric acid detection based on voltammetry. This technique is particularly considered for the physicochemical properties of flour and contains a simple pretreatment process to rapidly achieve extraction and adsorption of uric acid in flour. To achieve specific recognition of uric acid, graphene and poly(3,4-ethylenedioxythiophene) (PEDOT) were used for the adsorption and concentration of uric acid in flour. The adsorbed mixture was immobilized on the surface of a screen-printed electrode for highly sensitive detection of the uric acid. The results showed that electrocatalytic oxidation of uric acid could be achieved after adsorption by graphene and PEDOT. This electrocatalytic reaction allows its oxidation peak to be distinguished from those of other substances that commonly possess electrochemical activity. This voltammetry-based detection method is a portable and disposable analytical method. Because it is simple to operate, requires no professional training, and is inexpensive, it is a field analysis method that can be promoted.

Voltammetric Electrochemical Sensor for Phylogenetic Study in Acer Linn

Acer Linn. is a highly divergent species morphology in the maple family (Aceraceae). It is one of the genera facing a very difficult taxonomic situation. The phylogeny of the genus and the taxonomic system under the genus remain unclear. The use of electrochemical fingerprints for plant phylogenetic study is an emerging application in biosensors. In this work, leaves of 18 species of Acer Linn. with an exo-taxa were selected for electrochemical fingerprint recording. Two different conditions were used for improving the data abundance. The fingerprint of all species showed a series of oxidation peaks. These peaks can be ascribed to the oxidation of flavonols, phenolic acids, procyanidins, alkaloids, and pigments in plant tissue. These electrochemical fingerprints can be used for the identification of plant species. We also performed a phylogenetic study with data from electrochemical fingerprinting. The phylogenetic tree of Acer is divided into three main clades. The result is in full agreement with A. shangszeense var. anfuense, A. pictum subsp. mono, A. amplum, A. truncatum, and A. miaotaiense, belonging to the subsection Platanoidea. A. nikoense and A. griseum were clustered together in the dendrogram. Another group that fits the traditional classification results is in the subsection Integrifolia.

Thermally responsive reduced graphene oxide with electroactive functionality for controllable electroanalysis

A thermally responsive hybrid poly(NIPAm-b-BVIm[FcCOO])-rGO composed of block co-polymer poly(NIPAm-b-BVImBr), reduced graphene oxide (rGO) and electroactive anions was designed and synthesized to achieve electroactive functionality. It is the polymeric ionic liquids (PILs) segment in the block co-polymer that integrated the three different components into a whole hybrid. Such segment of PILs could not only promote the modification of polar PNIPAm onto the non-polar rGO by cation-π interaction, but also realize the immobilization of ferrocenecarboxylate anion (FcCOO^-) via anion-exchange reaction. The PNIPAm moiety endowed the poly(NIPAm-b-BVIm[FcCOO])-rGO with thermal responsiveness, while the anion moiety provided additional electroactive function. It is noteworthy that the conformational change of PNIPAm segment upon different temperature could reveal or seal the redox probe of FcCOO^-, thereby leading to a controllable expression of electroactivity switching by thermal stimuli. Owing to such regulation on surface property and conformation of PNIPAm segment, the modified electrode exhibited excellent thermally responsive electrocatalysis with reversible 'ON-OFF' effect toward the detection of ascorbic acid (AA), which led to two different catalytic states at the same electrode. The reversible electrocatalytic performance with switching capability of the poly(NIPAm-b-BVIm[FcCOO])-rGO/GCE is expected to have a broad application in the field of intelligent electrochemical sensors and devices.

A High-Response Electrochemical As(III) Sensor Using Fe3O4–rGO Nanocomposite Materials

Nowadays, heavy metal ion pollution in water is becoming more and more common, especially arsenic, which seriously threatens human health. In this work, we used Fe3O4–rGO nanocomposites to modify a glassy carbon electrode and selected square wave voltametric electrochemical detection methods to detect trace amounts of arsenic in water. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) showed that Fe3O4 nanoparticles were uniformly distributed on the rGO sheet, with a particle size of about 20 nm. Raman spectroscopy and electrochemical impedance spectroscopy (EIS) showed that rGO provides higher sensitivity and conductive substrates. Under optimized experimental conditions, Fe3O4–rGO-modified glassy carbon electrodes showed a higher sensitivity (2.15 µA/ppb) and lower limit of detection (1.19 ppb) for arsenic. They also showed good selectivity, stability, and repeatability.

Early sex determination of Ginkgo biloba based on the differences in the electrocatalytic performance of extracted peroxidase

Ginkgo biloba is a dioecious plant. Male ginkgoes are mainly used in landscaping, while females are mainly used for fruit production. However, sex identification of ginkgo is a difficult task, especially at the seedling stage. In this work, we present for the first time the use of electrochemical techniques for the identification of ginkgo sex based on the differences in peroxides within male and female ginkgos. Graphene was used to concentrate peroxides in ginkgo extract, thereby improving electrochemical signal sensitivity. The electrochemical reduction of hydrogen peroxide catalyzed by peroxidase was used as a prob for sex determination in ginkgo. This electrochemical identification technique can be used not only for the analysis of adult ginkgo, but also successfully for the analysis of tissue culture seedlings and live seedlings. This electrochemical sensor has excellent discrimination ability due to the difference in peroxidase content in the leaves and petiole of ginkgo of different sexes. This electrochemical sensor allows for a rapid identification of the sex of ginkgo and has a very strong potential for field analysis.

Graphene-Based Sensors for the Detection of Bioactive Compounds: A Review

Over the last years, different nanomaterials have been investigated to design highly selective and sensitive sensors, reaching nano/picomolar concentrations of biomolecules, which is crucial for medical sciences and the healthcare industry in order to assess physiological and metabolic parameters. The discovery of graphene (G) has unexpectedly impulsed research on developing cost-effective electrode materials owed to its unique physical and chemical properties, including high specific surface area, elevated carrier mobility, exceptional electrical and thermal conductivity, strong stiffness and strength combined with flexibility and optical transparency. G and its derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), are becoming an important class of nanomaterials in the area of optical and electrochemical sensors. The presence of oxygenated functional groups makes GO nanosheets amphiphilic, facilitating chemical functionalization. G-based nanomaterials can be easily combined with different types of inorganic nanoparticles, including metals and metal oxides, quantum dots, organic polymers, and biomolecules, to yield a wide range of nanocomposites with enhanced sensitivity for sensor applications. This review provides an overview of recent research on G-based nanocomposites for the detection of bioactive compounds, providing insights on the unique advantages offered by G and its derivatives. Their synthesis process, functionalization routes, and main properties are summarized, and the main challenges are also discussed. The antioxidants selected for this review are melatonin, gallic acid, tannic acid, resveratrol, oleuropein, hydroxytyrosol, tocopherol, ascorbic acid, and curcumin. They were chosen owed to their beneficial properties for human health, including antibiotic, antiviral, cardiovascular protector, anticancer, anti-inflammatory, cytoprotective, neuroprotective, antiageing, antidegenerative, and antiallergic capacity. The sensitivity and selectivity of G-based electrochemical and fluorescent sensors are also examined. Finally, the future outlook for the development of G-based sensors for this type of biocompounds is outlined.

Studying the preparation, electrochemical performance testing, comparison and application of a cost-effective flexible graphene working electrode

-A cost-effective flexible graphene working electrode (FGWE) was fabricated using overhead projector transparent film (OPTF) and a screen-printing technique. The surface morphology and electrochemical behavior of the electrode were characterized by scanning electron microscopy and cyclic voltammetry. The electrode presented a very thin layer of conductive ink (16.0 ± 0.7 µm) on a large effective surface area (0.301 ± 0.001 cm^-2). The anodic peak current density (j_pa) of acetaminophen (ACT) in FGWE was 5.2, 3.7, 3.5 and 6.0 times greater than the j_pa of glassy carbon electrode (GCE), flexible carbon working electrode (FCWE), SPE1, and SPE2, respectively. The electrochemical performance of FGWE toward ACT was evaluated by differential pulse voltammetry. Under optimized condition, ACT was quantified in a range of  4-100 µM, with good sensitivity, good accuracy (recovery = 82.3 ± 0.4 to 106 ± 3%), and excellent precision. FGWE was applied to determine ACT in commercial pharmaceutical formulations. The results of the study are in good agreement with those obtained by the standard spectrophotometric method. These results indicate that disposable FGWE is particularly useful for the detection of ACT, and its performance may serve as a platform for cost-effective flexible electrochemical sensors.

Comparative Studies of CPEs Modified with Distinctive Metal Nanoparticle-Decorated Electroactive Polyimide for the Detection of UA

In this present work, an electrochemical sensor was developed for the sensing of uric acid (UA). The sensor was based on a carbon paste electrode (CPE) modified with electroactive polyimide (EPI) synthesized using aniline tetramer (ACAT) decorated with reduced nanoparticles (NPs) of Au, Pt, and Ag. The initial step involved the preparation and characterization of ACAT. Subsequently, the ACAT-based EPI synthesis was performed by chemical imidization of its precursors 4,4′-(4.4′-isopropylidene-diphenoxy) bis (phthalic anhydride) BPADA and ACAT. Then, EPI was doped with distinctive particles of Ag, Pt and Au, and the doped EPIs were abbreviated as EPIS, EPIP and EPIG, respectively. Their structures were characterized by XRD, XPS, and TEM, and the electrochemical properties were determined by cyclic voltammetry and chronoamperometry. Among these evaluated sensors, EPI with Au NPs turned out the best with a sensitivity of 1.53 uA uM⁻¹ UA, a low limit of detection (LOD) of 0.78 uM, and a linear detection range (LDR) of 5–50 uM UA at a low potential value of 310 mV. Additionally, differential pulse voltammetric (DPV) analysis showed that the EPIG sensor showed the best selectivity for a tertiary mixture of UA, dopamine (DA), and ascorbic acid (AA) as compared to EPIP and EPIS.

Preparation of Electrochemical Sensor Based on Zinc Oxide Nanoparticles for Simultaneous Determination of AA, DA, and UA

ZnO nanoparticles (NPs) were synthesized using a hydrothermal method. Scanning electron microscope (SEM) and X-ray diffraction have been used for characterizing the synthesized ZnO NPs. An electrochemical sensor was fabricated using ZnO NPs–modified glassy carbon electrode for simultaneous determination of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The proposed electrochemical sensor exhibited excellent detection performance toward three analytes, demonstrating that it can potentially be applied in clinical applications. The results indicated the ZnO NPs–modified electrode can detect AA in the concentrations range between 50 and 1,000 μM. The ZnO NPs–modified electrode can detect DA in the concentrations range between 2 and 150 μM. The ZnO NPs–modified electrode can detect UA in the concentrations range between 0.2 and 150 μM. The limits of detections of AA, DA, and UA using ZnO NPs–modified electrode were calculated to be 18.4, 0.75, and 0.11 μM, respectively.

Determination of Ursolic Acid in Extracts From Ligustri lucidum Fruit Using an Electrochemical Method

In this work, we reported a facile wet chemical method for depositing Pt nanoparticles on the surface of boron nitride nanosheets (BNNS-Pt NPs). The deposited nanocomposite was applied for glassy carbon electrode surface modification. The modified electrode was then used for detecting ursolic acid (UA). The results indicate that the BNNS-Pt NPs exhibited excellent electrocatalytic activity toward UA oxidation compared with that of the bare glassy carbon electrode (GCE) and Pt NPs/GCE. The UA oxidation currents is linearly related its concentration from 1 to 1,200 pM. The limit of detection can be calculated to be 0.5 pM. In addition, the UA sensor was also successfully used for the determination of UA in Ligustri lucidum fruit samples.

N-doped Cu-MOFs for efficient electrochemical determination of dopamine and sulfanilamide

Fast and efficient tracking of micropollutants in aquatic environment by developing novel electrode materials is of great significance. Herein, a polyvinylpyrrolidone (PVP) assisted strategy is applied for synthesis of nitrogen doped Cu MOFs (N-Cu-MOF) for micropollutants electrochemical detection. The designed N-Cu-MOFs possess uniform octahedral shape with large surface area (1184 m² g^-1) and an average size of roughly 450 nm, exhibiting the excellent electroanalytical capability for the detection of multipollutants. In the case of dopamine (DA) and sulfonamides (SA) as typical microcontaminants, the designed N-Cu-MOFs exhibited wide linear ranges of 0.50 nM-1.78 mM and low detection limit (LOD, 0.15 nM, S/N = 3) for the determination of DA, as well as a linear range of 0.01-58.3 μM and LOD (0.003 μM, S/N = 3) for monitoring SA. The improved performance is attributed to the heteroatom introduction and good dispersion stability of N-Cu-MOF with PVP-decorated. The good electroanalytical ability of N-Cu-MOF for detection of DA and SA can provide a guide to efficient and rapid monitor other micropollutants and construct novel electrochemical sensors.

Facile Ratiometric Electrochemical Sensor for In Vivo/Online Repetitive Measurements of Cerebral Ascorbic Acid in Brain Microdiaysate

The in vivo monitoring of ascorbic acid (AA) following physiological and pathological events is of great importance because AA plays a critical role in brain functions. The conventional electrochemical sensors (ECSs) usually suffered from poor selectivity and sluggish electron transfer kinetics for cerebral AA oxidation. The exploitation of ECSs adapt to the electrochemical detection (ECD)-microdialysis system, here we reported a facile ratiometric electrochemical sensor (RECS) for in vivo/online repetitive measurements of cerebral AA in brain microdiaysate. The sensor were constructed by careful electrodeposition of graphene oxide (GO) onto glassy carbon (GC) electrodes. Methylene blue (MB) was electrostatically adsorbed onto the GO surface as a built-in reference to achieve ratiometric detection of AA. The subsequent proper electroreduction treatment was able to readily facilitate the oxidation of AA at a relatively negative potential (-100 mV) and the oxidation of MB at separated potential (-428 mV). The in vitro experiments demonstrated that the RECS exhibited high sensitivity (detection limit: 10 nM), selectivity, and stability toward AA determination, enabling the in vivo/online repetitive measurement of cerebral AA in brain microdiaysate with high reliability. As a result, the designed RECS was successfully applied in the ECD-microdialysis system to in vivo/online repetitive monitoring the dynamic change of cerebral AA in the progress of the global cerebral ischemia/reperfusion events. More, the microinjection of endogenous AA and AA oxidase (AAOx) verified the reliability of the proposed RECS for in vivo/online repetitive cerebral AA detection. This proposed sensor filled the gap that no rational electrochemical sensor has been developed for the ECD-microdialysis system since its creation by the Mao group in 2005, which provided a reliable and effective method for brain chemistry research.

Palladium supported on polypyrrole/reduced graphene oxide nanoparticles for simultaneous biosensing application of ascorbic acid, dopamine, and uric acid

In this study, we report a facile and effective production process of palladium nanoparticles supported on polypyrrole/reduced graphene oxide (rGO/Pd@PPy NPs). A novel electrochemical sensor was fabricated by incorporation of the prepared NPs onto glassy carbon electrode (GCE) for the simultaneous detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The electrodes modified with rGO/Pd@PPy NPs were well decorated on the GCE and exhibited superior catalytic activity and conductivity for the detection of these molecules with higher current and oxidation peak intensities. Simultaneous detection of these molecules was achieved due to the high selectivity and sensitivity of rGO/Pd@PPy NPs. For each biomolecule, well-separated voltammetric peaks were obtained at the modified electrode in cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. Additionally, the detection of these molecules was performed in blood serum samples with satisfying results. The detection limits and calibration curves for AA, DA, and UA were found to be 4.9 × 10^-8, 5.6 × 10^-8, 4.7 × 10^-8 M (S/N = 3) and ranging from 1 × 10^-3 to 1.5 × 10^-2 M (in 0.1 M PBS, pH 3.0), respectively. Hereby, the fabricated rGO/Pd@PPy NPs can be used with high reproducibility, selectivity, and catalytic activity for the development of electrochemical applications for the simultaneous detection of these biomolecules.

Comparison of activation processes for 3D printed PLA-graphene electrodes: electrochemical properties and application for sensing of dopamine

This paper reports the comparison of the electrochemical properties of 3D PLA-graphene electrodes (PLA-G) under different activation conditions and through different processes.

Platelet-structured strontium titanate perovskite decorated on graphene oxide as a nanocatalyst for electrochemical determination of neurotransmitter dopamine

In this work, we synthesized strontium titanate (SrTiO₃) by a simple co-precipitation technique and decorated it with graphene oxide (SrTiO₃/GO) for the effective determination of neurotransmitter agent dopamine (DA).

Gold nanoparticle decorated polypyrrole/graphene oxide nanosheets as a modified electrode for simultaneous determination of ascorbic acid, dopamine and uric acid

AuNPs, GO and PPy are combined effectively to form a novel composite showing a huge enhancement in electrochemical performance compared to the single materials.

Simultaneous Monitoring of Febuxostat and Uric Acid in Human Serum Samples Using the Direct Square-Wave Voltammetric Method

Background:

High uric acid serum level, hyperuricemia, is now associated with many diseases such as gout, chronic kidney disease, hypertension, coronary artery disease and diabetes. Febuxostat is a novel selective xanthine oxidase inhibitor approved for the treatment of hyperuricemia.

Objective:

The aim of this study was to develop a first analytical method for the simultaneous determination of febuxostat and uric acid.

Methods:

An unmodified boron-doped diamond electrode provided concurrent quantitation of drug at low levels and uric acid, which has clinical significance in the diagnosis and therapy of hyperuricemia, at relatively high concentrations. The direct square-wave voltammetric method was applied to the analysis of both analytes in human serum samples.

Results:

Under the optimized conditions, the linear response of peak current on febuxostat concentration was achieved in the range from 7.5 × 10-7 to 3 × 10-5 M, while uric acid showed two linear ranges of 5 × 10-6 - 5 × 10-5 M and 5 × 10-5 - 2 × 10-4 M. The method was successfully utilised for quantification of both analytes in human serum samples. Good recoveries were obtained without interference from common inorganic cations and anions as well as glucose, dopamine, ascorbic and folic acids at concentrations expected in physiological conditions.

Conclusion:

The great benefits of developed method are fast analysis (only 7.5 s for run), low cost and simplicity of performance.

Primary and Secondary Mesoscopic Hybrid Materials of Au Nanoparticles@Silk Fibroin and Applications

In this work, we demonstrate the principle of mesoscopic construction of silk fibroin (SF) hybrid materials, which endows the materials with new performance. In implementing this strategy, mediating molecules, wool keratin (WK) molecules, were adopted to in-line synthesize Au nanoparticles (WK@AuNPs), which further create the stable linkage of AuNPs with SF nanofibril networks via templated β-crystallization. Fourier transform infrared spectroscopy, X-ray diffraction, and atomic force microscopy demonstrate that the mesoscopic hybrid network structure of the hybrid materials is different from neat SF materials, which gives rise to various new performances, that is, long-stable fluorescence emission. As the fluorescence emission can be characteristically annealed by Cu ions, therefore be adopted as the highly selective ion probes. Moreover, as WK@AuNPs are homogeneously connected to SF nanofibril networks, the carbonization of the materials leads to secondary hybrid materials of carbon-Au, where nano-sized Au particles are well distributed in carbonized mesoscopic conductive carbon networks. Such hybrid materials of carbon-Au can be further fabricated into electrochemical (i.e., dopamine) sensors, which are demonstrated to have excellent sensing performance.

A phenyl glycinol appended calix[4]arene film for chiral detection of ascorbic acid on gold surface

This paper describes the synthesis of new chiral calix [4]arene derivative having (R)-2-phenylglycinol moiety (compound 6), and its chiral recognition studies for ascorbic acid (AA) enantiomers by using Quartz Crystal Microbalance (QCM). Initial experiments indicated that the outstanding selective chiral recognition (α) was observed as 2.61 for l-enantiomer of AA. The sensitivity (S) and the limit of detection (LOD) values for L-AA were calculated as 0.0226 Hz/μM and 0.63 μM, respectively. Furthermore, the sorption behavior and mechanism of AA onto compound 6 film were evaluated and the sorption data exhibited a good correlation with the Freundlich isotherm models. The maximum uptake of L-AA by the sensor was found as 5895.76 mg/g. In conclusion, chiral recognition of AA enantiomers as real-time, sensitive, selective and effective was performed by a calixarene derivative coated QCM sensor.

Loading of AgNPs onto the surface of boron nitride nanosheets for determination of scopoletin in Atractylodes macrocephala

In this work, silver nanoparticles prepared by a molten salt method were deposited onto the surface of hexagonal boron nitride nanosheet (NS/AgNP) to from a composite. The synthesized nanocomposite was applied for surface modification of screen-printed electrode (SPE). The modified electrode showed a superior performance for electrochemical detection of scopoletin. The electrochemical behaviour of NS/AgNP/SPE was studied in detail. An electrocatalytic oxidation was observed and used for analytical determination of scopoletin concentration. The response of the proposed electrochemical sensing platform was linear over a wide detection range of 2 μM to 0.45 mM with a low limit of detection (LOD) of 0.89 μM. The NS/AgNP/SPE also showed excellent reproducibility and anti-interference property. In addition, the proposed scopoletin sensor was successfully used for the determination of scopoletin in Atractylodes macrocephala herb samples.

High Sensitive Immunoelectrochemical Measurement of Lung Cancer Tumor Marker ProGRP Based on TiO₂-Au Nanocomposite

Progastrin-releasing peptide (ProGRP), which is known to be highly specific and sensitive to small cell lung cancer (SCLC), has been proven to be a valuable substitute for neuron-specific enolase in SCLC diagnostics and monitoring, especially in its early stages. The detection of ProGRP levels also facilitates a selection of therapeutic treatments. For the fabrication of our proposed biosensor, titanium (IV) oxide microparticles were first used, followed by dispersing gold nanoparticles into chitosan and immobilizing them onto a carbon paste electrode (CPE) surface. The developed immunosensor exhibits a much higher biosensing performance in comparison with current methods, when it comes to the detection of ProGRP. Therefore, the proposed CPE/TiO₂/(CS+AuNPs)/anti-ProGRP/BSA/ProGRP is excellent for the development of a compact diagnostics apparatus.

Porous tal palm carbon nanosheets: preparation, characterization and application for the simultaneous determination of dopamine and uric acid

A novel porous tal palm carbon nanosheet (PTPCN) material was synthesized from the leaves of Borassus flabellifer (tal palm) and used for developing an electrochemical sensor through modifying a glassy carbon electrode (GCE) simply by drop-casting on it a solution of the material for the sensitive simultaneous detection of dopamine (DA) and uric acid (UA), even in the presence of interfering species. The drop-casting solution was prepared by simply dispersing the PTPCNs in ethanol without using any other binding materials (e.g. Nafion). The surface morphologies of the PTPCNs were studied through field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high resolution TEM (HRTEM). Energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction spectroscopy (XPS) studies revealed the chemical composition of the PTPCNs' surface. Their structural properties were studied using X-ray diffraction (XRD) and Raman spectroscopy. Brunauer-Emmett-Teller (BET) analysis confirmed the surface area and pore volume to be 1094.53 m² g^-1 and 0.74 cm³ g^-1, respectively, while Barrett-Joyner-Halenda (BJH) pore-size distribution showed the average pore size to be 22 nm. The sufficiently large surface area and pore-size distribution suggested better electrocatalytic properties compared to the average modifying materials. The modified electrode (PTPCNs/GCE) was characterized through impedimetric and CV techniques in standard potassium ferricyanide solution for evaluating their charge-transfer resistance and electrochemical properties. The limits of detection (S/N = 3) were 0.17 μM and 0.078 μM and the sensitivities were 1.2057 μA μM^-1 cm^-2 and 2.693 μA μM^-1 cm^-2 for UA and DA, respectively. The possible interactions that took place between the PTPCNs and the analytes that aided in the enhancement of the electroanalytical performance of the PTPCNs/GCE are discussed based on the experimental findings and established theoretical concepts. The PTPCNs/GCE was successfully employed for analyzing real samples, like dopamine injection and urine.