Current-use of developers in thermal paper from 14 countries using liquid chromatography coupled to quadrupole time-of-flight mass spectrometry

Chemical mixture effects on the simplified human intestinal microbiota: Assessing xenobiotics at environmentally realistic concentrations

The microbial community present in our intestines is pivotal for converting indigestible substances into vital nutrients and signaling molecules such as short-chain fatty acids (SCFAs). These compounds have considerable influence over our immune system and the development of diverse human diseases. However, ingested environmental contaminants, known as xenobiotics, can upset the delicate balance of the microbial gut community and enzymatic processes, consequently affecting the host organism. In our study, we employed an in vitro bioreactor model system based on the simplified human microbiome model (SIHUMIx) to investigate the direct effects of specific xenobiotics, such as perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and perfluorobutanoic acid (PFBA) or bisphenol S (BPS) and bisphenol F (BPF), either individually or in combination, on the microbiota. We observed increased SCFA production, particularly acetate and butyrate, with PFAS exposure. Metaproteomics revealed pathway alterations across treatments, including changes in vitamin synthesis and fatty acid metabolism with BPX. This study underscores the necessity of assessing the combined effects of xenobiotics to better safeguard public health. It emphasizes the significance of considering adverse effects on the microbiome in the risk assessment of environmental chemicals.

Bisphenol S causes excessive estrogen synthesis by activating FSHR and the downstream cAMP/PKA signaling pathway

Estrogen excess in females has been linked to a diverse array of chronic and acute diseases. Emerging research shows that exposure to estrogen-like compounds such as bisphenol S leads to increases in 17β-estradiol levels, but the mechanism of action is unclear. The aim of this study was to reveal the underlying signaling pathway-mediated mechanisms, target site and target molecule of action of bisphenol S causing excessive estrogen synthesis. Human ovarian granulosa cells SVOG were exposed to bisphenol S at environmentally relevant concentrations (1 μg/L, 10 μg/L, and 100 μg/L) for 48 h. The results confirms that bisphenol S accumulates mainly on the cell membrane, binds to follicle stimulating hormone receptor (FSHR) located on the cell membrane, and subsequently activates the downstream cyclic adenosine monophosphate/protein kinase A (cAMP/PKA) signaling pathway, leading to enhanced conversion of testosterone to 17β-estradiol. This study deepens our knowledge of the mechanisms of environmental factors in pathogenesis of hyperestrogenism.

Description of Solvent-Extractable Chemicals in Thermal Receipts and Toxicological Assessment of Bisphenol S and Diphenyl Sulfone

Research on thermal receipts has previously focused on the toxic effects of dermal exposure from the most publicized developers (e.g., bisphenol A (BPA) and bisphenol S (BPS)), while no studies have reported on the other solvent-extractable compounds therein. Diphenyl sulfone (DPS) is a sensitizer added to thermal receipts, but little is known about DPS concentrations in receipts or potential toxicity. Here, we quantified BPA, BPS, and DPS concentrations and tentatively identified the solvent-extractable compounds of thermal receipts collected from three South Dakota (USA) cities during 2016-2017. An immortalized chicken hepatic cell line, cultured as 3D spheroids, was used to screen effects of DPS, BPS, and 17ß estradiol (E2; 0.1-1000 µM) on cell viability and gene expression changes. These chemicals elicited limited cytotoxicity with LC50 values ranging from 113 to 143 µM, and induced dysregulation in genes associated with lipid and bile acid homeostasis. Taken together, this study generated novel information on solvent-extractable chemicals from thermal receipts and toxicity data for DPS.

Interacting with luteinizing hormone receptor provides a new elucidation of the mechanism of anti-androgenicity of bisphenol S

Bisphenol S (BPS) exhibited inhibitory effects on androgen synthesis, but its target of action remains unclear. We investigated the effects of BPS exposure at environmentally relevant concentrations (1 μg/L, 10 μg/L and 100 μg/L) for 48 h on androgen synthesis in rat ovarian theca cells and explored the underlying mechanisms, target site and target molecule. The results showed that BPS exposure inhibited the transcript levels of steroidogenic genes and reduced the contents of androgen precursors, testosterone and dihydrotestosterone. BPS exposure decreased the phosphorylation levels of extracellular signal-related kinase 1/2 (ERK1/2), and the inhibitory effects of BPS on testosterone content and steroidogenic gene expression were blocked by ERK1/2 agonist LY2828360, suggesting that ERK1/2 signaling pathway mediates the inhibitory effects of BPS on androgen synthesis. BPS mainly accumulated on the cell membrane, impermeable BPS-bovine serum albumin exposure still inhibited androgen synthesis, BPS interacted with rat luteinizing hormone receptor (LHR) via formation of hydrogen bonds in the transmembrane region, and the inhibitory effects of BPS on ERK1/2 phosphorylation were blocked by luteinizing hormone (the natural agonist of LHR), indicating that LHR located on the cell membrane is the target of action of BPS. This paper provides a new elucidation of the mechanism of anti-androgenicity of BPS, especially for the non-genomic pathways.

Evaluating the efficiency of the 2020 ban of BPA and BPS in thermal papers in Switzerland

Thermal printing technology requires a color developer to activate the dye under the action of heat. Bisphenol A (BPA) has traditionally been used for this purpose, although it has increasingly been replaced by bisphenol S (BPS) in recent years. Due to concerns regarding their toxicity, the Swiss authorities have banned both BPA and BPS from thermal papers since 2020. The impact of this regulatory decision was evaluated during 3 monitoring campaigns: in 2013-2014, 2019 and 2021. They were used to describe the starting point, the transition phase, and the status after entry into force of the ban, respectively. Whereas the use of BPA as color developer dropped from 82.2% in 2013/14 to 10.8% in 2021, the fraction of BPS-based thermal paper rose from 3.1% to 19.1% during the same period, despite being banned. However, Pergafast® 201 (PF201) is now the main color developer in thermal paper in Switzerland, with an occurrence of 60.3%. Other alternatives such as D-8, TGSA, PPSMU, NKK-1304, BPS-MAE, D-90 and Blue4est® have only been marginally detected. This study demonstrates the efficiency of the regulatory measure and the feasibility to substitute BPA in thermal papers with less-toxic alternatives.

Bisphenol S and F affect cell cycle distribution and steroidogenic activity of human ovarian granulosa cells, but not primary granulosa tumour cells

Bisphenol S (BPS) and F (BPF), a new generation of bisphenols (BPs), are the main substitutes for bisphenol A (BPA). Both have been detected in human body fluids. Importantly, bisphenols are structurally similar to oestrogen, the main sex hormone in females. Because bisphenols bind to nuclear oestrogen receptors (ESR1 and ESR2) and to membrane G-coupled receptor 30 (GPR30), they can disrupt ovarian function. Here, we reveal the molecular mechanism underlying the effects of BPS and BPF on the cell cycle and steroidogenesis in the human ovarian granulosa cell (GC) line HGrC1. We show that BPS and BPF arrest GCs at the G0/G1 phase by inducing expression of cyclin D2, an important event that triggers maximal steroid synthesis in response to the BPS and BPF. We used pharmacological inhibitors to show that BPS and BPF, despite acting via already described pathways, also stimulate steroid secretion via IGF1R pathways in HGrC1 cells. Moreover, we identified differences critical to bisphenols response between normal (HGrC1) and primary tumour granulosa (COV434) cells, that enable COV434 cells to be more resistant to bisphenols. Overall, the data suggest that BPS and BPF drive steroidogenesis in human ovarian GCs by affecting the cell cycle. Furthermore, the results indicate that BPS and BPF act not only via the classical and non-classical ESR pathways, but also via the IGF1R pathway.

Bisphenols and alternative developers in thermal paper receipts from the U.S. market assessed by Fourier transform infrared spectroscopy

Cash register receipts made of thermal paper expose workers and shoppers to endocrine-disrupting chemicals and contaminate paper recycling streams. In 2022, 571 receipts were collected from retail stores in the United States and tested for developer chemicals using attenuated total reflection infrared spectroscopy. The results were compared to a 2017 study of 167 receipts to determine changes in color developer use over time. Receipts were tested as-is and a subset were additionally subjected to a simple extraction that improved detection of receipt chemicals. Bisphenol S was the most frequently detected developer (85% of tested receipts), followed by Pergafast 201 (12%), bisphenol A (1%); and Appvion Alpha Free, D-8, and NKK-1304 (each below 1%). NKK-1304 is reported here for the first time in a scientific journal. The frequency of bisphenol A usage in receipts decreased and the frequency of bisphenol S and Pergafast 201 increased between 2017 and 2022, particularly among large companies. National retailers were more likely than regional or local retailers to have adopted non-bisphenol alternatives. Potential health and environmental hazards of the detected developer chemicals and strategies for reduction are discussed.

Broadening the lens on bisphenols in coastal waters: Occurrence, partitioning, and input fluxes of multiple novel bisphenol S derivatives along with BPA and BPA analogues in the Pearl River Delta, China

Bisphenol S derivatives (BDs) are being widely used as novel substitutes for BPA and BPA analogues (BPAs), causing pollution in various environmental compartments. However, the occurrence and fate of BDs in coastal waters are currently unknown. To broaden the lens on bisphenols in coastal waters, this study measured a broad suite of 23 bisphenols, including 12 BDs along with BPA and 10 BPAs, in water, suspended particulate matter (SPM), and sediment from eight major outlets of the Pearl River Delta, China (PRD). In addition to BPA and BPAs, all the 12 BDs were detected in the collected samples. The total concentration of 12 BDs ranged from 1.2 to 25 ng/L (median of 4.3 ng/L) in water samples, 0.80-13 ng/g dw (median of 3.0 ng/g dw) in SPM samples and 0.48-3.7 ng/g dw (median of 0.64 ng/g dw) in sediment samples. For most individual BDs, they had comparable concentrations to individual BPAs. In addition, logK_d values of the frequently detected bisphenols, including BPA, BPS, BPF, 4-((4-Isopropoxyphenyl)sulfonyl)phenol (BPSIP), 2,4-bis(phenylsulfonyl)phenol (DBSP), and other 9 bisphenols, were significantly correlated with their logK_ow values (R² = 0.38, p < 0.05), indicating that the partitioning of bisphenols between the aqueous and SPM phases were strongly influenced by hydrophobic interaction. Based on bisphenols' concentrations in water from the eight outlets of PRD, the estimated input fluxes of novel BDs (1900 kg/y) were found to be even higher than that of BPAs (550 kg/y). This indicates that the riverine input of BDs into the coastal environment is gradually increasing, which should be taken seriously in the future.

The fate of bisphenol A, bisphenol S, and their respective glucuronide metabolites in ovarian cells

Ovarian cells are critical for reproduction and steroidogenesis, which are functions that can be impacted by exposure to xenobiotics. As in other extra-hepatic tissues, biotransformation events may occur at the ovarian level. Such metabolic events deserve interest, notably as they may modulate the overall exposure and toxicity of xenobiotics. In this study, the comparative metabolic fate of two bisphenols was investigated in ovarian cells. Bisphenol A (BPA), a model endocrine disruptor, and its major substitute bisphenol S (BPS) were selected. Bovine granulosa cells (primary cultures) and theca explants (ex vivo tissue) were exposed for 24hr to tritium-labeled BPA, BPS and their respective glucuronides (i.e. their major circulating forms), at concentrations consistent with low-dose exposure scenarios. Mass balance studies were performed, followed by radio-HPLC profiling. The capability of both cell compartments to biotransform BPA and BPS into their respective sulfo-conjugates was demonstrated, with sulfation being the predominant metabolic route. In theca, there was a significantly higher persistence of BPA (compared to BPS) residues over 24hr. Moreover, only theca explants were able to deconjugate inactive BPA-glucuronide and BPS-glucuronide back into their biologically active aglycone forms. Deconjugation rates were demonstrated to be higher for BPS-G than for BPA-G. These findings raise concerns about the in situ direct release of bisphenols at the level of the ovary and demonstrate the relevance of exploring the biotransformation of bisphenols and their circulating metabolites in different ovarian cells with specific metabolic capabilities. This work also provides essential knowledge for the improved risk assessment of bisphenols.

Reviewing the variability in urinary concentrations of non-persistent organic chemicals: evaluation across classes, sampling strategies and dilution corrections

Various biomonitoring studies have been carried out to investigate the exposure of populations by measuring non-persistent organic chemicals in urine. To accurately assess the exposure, study designs should be carefully developed to maximise reproducibility and achieve good characterization of the temporal variability. To test these parameters, the intraclass correlation coefficients (ICCs) are calculated from repeated measurements and range from poor (<0.4) to excellent (≥0.75). Several studies have reported ICCs based on diverse study designs, but an overview, including recommendations for future studies, was lacking. Therefore, this review aimed to collect studies describing ICCs of non-persistent organic chemicals, discuss variations due to study design and formulate recommendations for future studies. More than 60 studies were selected, considering various chemical classes: bisphenols, pyrethroids, parabens, phthalates, alternative plasticizers and phosphate flame retardants. The variation in ICCs for an individual chemical was high (e.g. ICC of propyl paraben = 0.28-0.91), showing the large impact of the study design and of the specific exposure sources. The highest ICCs were reported for parabens (median = 0.52), while lowest ICCs were for 3-phenoxybenzoic acid (median = 0.08) and bisphenol A (median = 0.20). Overall, chemicals that had an exposure source with high variation, such as the diet, showed lower ICCs than those with more stable exposure sources, such as indoor materials. Urine correction by specific gravity had an overall positive effect on reducing the variability of ICCs. However, this effect was mostly seen in the adult population, while specific compounds showed less variation with creatinine correction. Single samples might not accurately capture the exposure to most non-persistent organic chemicals, especially when small populations are sampled. Future studies that examine compounds with low ICCs should take adequate measures to improve accuracy, such as correcting dilution with specific gravity or collecting multiple samples for one participant.

Adaptation and Resistance: How Bacteroides thetaiotaomicron Copes with the Bisphenol A Substitute Bisphenol F

Bisphenols are used in the process of polymerization of polycarbonate plastics and epoxy resins. Bisphenols can easily migrate out of plastic products and enter the gastrointestinal system. By increasing colonic inflammation in mice, disrupting the intestinal bacterial community structure and altering the microbial membrane transport system in zebrafish, bisphenols seem to interfere with the gut microbiome. The highly abundant human commensal bacterium Bacteroides thetaiotaomicron was exposed to bisphenols (Bisphenol A (BPA), Bisphenol F (BPF), Bisphenol S (BPS)), to examine the mode of action, in particular of BPF. All chemicals caused a concentration-dependent growth inhibition and the half-maximal effective concentration (EC50) corresponded to their individual logP values, a measure of their hydrophobicity. B. thetaiotaomicron exposed to BPF decreased membrane fluidity with increasing BPF concentrations. Physiological changes including an increase of acetate concentrations were observed. On the proteome level, a higher abundance of several ATP synthase subunits and multidrug efflux pumps suggested an increased energy demand for adaptive mechanisms after BPF exposure. Defense mechanisms were also implicated by a pathway analysis that identified a higher abundance of members of resistance pathways/strategies to cope with xenobiotics (i.e., antibiotics). Here, we present further insights into the mode of action of bisphenols in a human commensal gut bacterium regarding growth inhibition, and the physiological and functional state of the cell. These results, combined with microbiota-directed effects, could lead to a better understanding of host health disturbances and disease development based on xenobiotic uptake.

Supramolecular solvent-based microextraction probe for fast detection of bisphenols by ambient mass spectrometry

In this study, we investigated for the first time the suitability of supramolecular solvent (SUPRAS)-based microextraction probe for the development of generic and fast sample treatment prior to qualitative analysis by ambient mass spectrometry (AMS) based on ASAP (atmospheric solids analysis probe). SUPRAS are nanostructured liquids formed by the self-assembly of amphiphilic aggregates with multiple binding sites and microenvironments of different polarity for the efficient extraction of multiple compounds. Different types of SUPRAS were evaluated as a simple and single step sample treatment for ASAP. The method was applied to the screening of bisphenol A and structural analogues in thermal paper. Optimal results were achieved with SUPRAS synthesized with 1-decanol in mixtures of ethanol:water. SUPRAS (1.1-2 μL) were loaded onto glass probes and placed in contact with samples for 10 s before ASAP analysis. AMS signal peaks (width: 0.2-0.5 min) were easily integrated and normalized with internal standards (RSD: 2-25%). The method was applied to 62 samples of thermal paper. BPA and BPS were the most widely used, this highlighting the progressive industrial replacement of BPA by BPS.

Toxicological profile of bisphenol F via comprehensive and extensive toxicity evaluations following dermal exposure

Bisphenol F (BPF) is classified as a harmful substance by the U.S. Environmental Protection Agency. Although previous studies focused on human exposure to BPF via direct consumption or inhalation, few investigators assessed potential toxicological effects following skin contact. The aim of this study was to examine (1) the degree and pattern by which BPF is absorbed onto the skin in vivo, and (2) determination of toxicity and safety using the following tests: acute dermal; a 28-day repeat dermal; a skin irritation; an eye irritation; and a skin sensitization. As indicated by the amount of BPF remaining in the epidermis or dermis, data demonstrated that BPF was absorbed through the skin at a 26.5% rate. BPF penetrated the subcutaneous layer at a "fast rate" (Kp: 2.2E-02). Although no toxicological changes or local irritation were observed following skin exposure, BPF induced potent sensitization. In summary, the findings of this study showed that BPF penetrated and was absorbed into the skin at a high rate which was associated with enhanced chemical-induced skin sensitization and this may have significant implications following exposure of skin to BPF.

Identification of bisphenols and derivatives in greenhouse dust as a potential source for human occupational exposure

Bisphenol A (BPA) and alternative bisphenols are widely used in the industrial production of polycarbonates and resin polymers. Adverse effects on human health have been described for BPA and owing to the structural similarity of alternative bisphenols and derivatives, a similar toxicity profile is expectable. Dust can act as a sink for bisphenols owing to the large surface area to mass ratio. Human risk exposure to bisphenols via indoor dust has been widely assessed in the last decade. The environmental conditions inside greenhouses, among other factors, facilitate that chemicals are released from greenhouse building materials to dust. This study aims to explore for the first time the potential of greenhouse dust as a new source of bisphenols for human exposure. For this purpose, a supramolecular solvent-based method was applied to the extraction of twenty-one bisphenols from greenhouse dust, prior to their determination by liquid chromatography–tandem mass spectrometry. Nineteen bisphenols were found in the five greenhouse dust samples analysed, with concentrations ranging from 5275 ng g⁻¹ (BPA) to 0.25 ng g⁻¹ (trichlorobisphenol A). The average daily dose (ADD) via dust ingestion for bisphenol compounds was calculated, in order to estimate the occupational exposure for inadvertent dust ingestion. Despite the calculated ADD value for BPA (47.81 ng kg⁻¹ day⁻¹) being below the tolerable daily intake proposed by EFSA (4·10³ ng kg⁻¹ day⁻¹), this value was considerably higher than those previously reported for indoor dust, which brings to light the importance of considering greenhouse dust as bisphenols source of exposure for greenhouse workers.

In vitro Phase I metabolism of newly identified plasticizers using human liver microsomes combined with high resolution mass spectrometry and based on non-targeted and suspect screening workflows

Three plasticizers, namely bis (3,5,5-trimethylhexyl) phosphate (TMHPh), di(propylene glycol) dibenzoate (DiPGDB), and tri-n-butyl trimellitate (TBTM), were recently identified and reported in high concentrations in indoor dust from Belgian homes. In this study, their behavior within the human body was investigated by generating Phase I biotransformation products for the first time. Human liver microsomes (HLMs) were used following an in vitro assay and liquid chromatography time of flight mass spectrometry (LC-QTOF-MS) was employed for the analysis. Biotransformation products were identified for TMHPh as products of hydroxylation reactions that took place in one or two positions in the structure of the substrate. For DiPGDB, biotransformation products were formed after hydrolysis of carboxylic esters and oxidative-O-dealkylation. For TBTM, biotransformation products were formed through hydrolysis of the different carboxylic esters of the molecule, in agreement with studies on structurally similar compounds. The generated results can contribute to biomonitoring studies creating new knowledge on human exposure to emerging compounds and on the metabolism of xenobiotics.

Bisphenol A in Africa: A review of environmental and biological levels

Bisphenol A (BPA) is a synthetic ubiquitous environmental toxicant present in many industrial and consumer products. BPA is recognized as an endocrine-disrupting chemical (EDC), and its mechanisms of perturbation of the physiological process include interference with hormone pathways and epigenetic modifications. An increase in industrial productions and food packaging across Africa has resulted in increased utilization of BPA-containing products with a concomitant increase in environmental bioaccumulation and human exposure. In order to assess the extent of this bioaccumulation, we identified, collated, and summarized the levels of BPA that have been reported across Africa. To achieve this aim, we performed a systematic search of four indexing databases to identify articles and extracted the necessary data from the selected articles. Of the 42 publications we retrieved, 42% were on water samples, 22% on food, 20% on human biological fluids, 10% on sediments, soils, and sludge and 6% on consumer and personal care products (PCPs). The highest level of BPA reported in literature across Africa was 251 ng/mL, 384.8 ng/mL, 937.49 ng/g, 208.55 ng/mL, 3,590 μg/g, and 154,820 μg/g for water, wastewater, food, biological fluids, consumer and PCPs, and semisolids, respectively. This review presented a comparative perspective of these levels relative to regulatory limits and levels reported from other continents. Finally, this review highlighted critical needs for the regulation of BPA across Africa in order to stem its environmental and toxicological impact. We hope that this review will stimulate further research in understanding the impact of BPA on health outcomes and wellbeing across Africa.

Skin Absorption of Bisphenol A and Its Alternatives in Thermal Paper

OBJECTIVES

Bisphenol A (BPA) is the most used colour developer in thermal paper for cashiers receipts, labels, and tickets. BPA can migrate onto the skin and be absorbed when handling these papers. BPA is a known endocrine disruptor and is therefore being replaced in thermal paper by some alternatives such as Bisphenol S (BPS), D-8, and Pergafast 201® (PF201). To our knowledge, no studies have characterized skin permeation of these BPA alternatives.

METHODS

We measured/characterized skin absorption for BPA, BPS, D-8, and PF201 through ex vivo human skin using flow-through diffusion cells according to OECD guideline 428. Skin samples were 7-12 per test substance from three different skin donors. Skin metabolism was studied for BPA. Dermal absorption was expressed as the amount of the BPA alternatives in the receptor fluid over applied dose in percent (%).

RESULTS

The absorbed dose after 24 h of exposure was 25% for BPA, 17% for D-8, 0.4% for BPS, and <LLOQ for PF201. The amount of BPA-glucuronide in the receptor fluid after 24 h was under the limit of quantification (LLOQ = 0.2 µg l-1). Despite the 10-fold lower concentration of the aq solution applied on the skin, D-8's permeation rate JMAX was 5-fold higher than the one for BPS (0.032 versus 0.006 µg cm-2 h-1). Neither D-8 nor BPS permeated readily through the skin (tlag = 3.9 h for D-8, 6.4 h for BPS). None of PF201's skin permeation kinetic parameters could be determined because this BPA analogue was not quantifiable in the receptor fluid in our test conditions.

CONCLUSIONS

Skin absorption was in decreasing order: BPA > D-8 >> BPS > PF201. These results are in agreement with their log Kow and molecular weights. We provided here the necessary data to estimate the extent of skin absorption of BPA analogues, which is a necessary step in risk assessment, and ultimately evaluate public health risks posed by D-8, BPS, and PF201.

Determinants of exposure levels of bisphenols in flemish adolescents

The broadly used industrial chemical bisphenol A (BPA), applied in numerous consumer products, has been under scrutiny in the past 20 years due to its widespread detection in humans and the environment and potential detrimental effects on human health. Following implemented restrictions and phase-out initiatives, BPA is replaced by alternative bisphenols, which have not received the same amount of research attention. As a part of the fourth cycle of the Flemish Environment and Health Study (FLEHS IV, 2016-2020), we monitored the internal exposure to six bisphenols in urine samples of 423 adolescents (14-15 years old) from Flanders, Belgium. All measured bisphenols were detected in the study population, with BPA and its alternatives bisphenol F (BPF) and bisphenol S (BPS) showing detection frequencies > 50%. The reference values show that exposure to these compounds is extensive. However, the urinary BPA level decreased significantly in Flemish adolescents compared to a previous cycle of the FLEHS (2008-2009). This suggests that the replacement of BPA with its analogues is ongoing. Concentrations of bisphenols measured in the Flemish adolescents were generally in the same order of magnitude compared to recent studies worldwide. Multiple regression models were used to identify determinants of exposure based on information on demographic and lifestyle characteristics of participants, acquired through questionnaires. Some significant determinants could be identified: sex, season, smoking behavior, educational level of the parents, recent consumption of certain foods and use of certain products were found to be significantly associated with levels of bisphenols. Preliminary risk assessment showed that none of the estimated daily intakes (EDIs) of BPA exceeded the tolerable daily intake, even in a high exposure scenario. For alternative bisphenols, no health-based guidance values are available, but in line with the measured urinary levels, their EDIs were lower than that of BPA. This study is, to the best of our knowledge, the first to determine internal exposure levels of other bisphenols than BPA in a European adolescent population.

Short-term variability of bisphenols in spot, morning void and 24-hour urine samples

Due to worldwide regulations on the application of the high production volume industrial chemical bisphenol A (BPA) in various consumer products, alternative bisphenols such as bisphenol F (BPF) and bisphenol S (BPS) are increasingly used. To assess human exposure to these chemicals, biomonitoring of urinary concentrations is frequently used. However, the short-term variability of alternative bisphenols has not been evaluated thoroughly yet, which is essential to achieve a correct estimation of exposure. In this study, we collected all spot urine samples from ten healthy adults for five consecutive days, and an additional 24 h pooled sample. We measured the concentrations of seven bisphenols (BPAF, BPF, BPA, BPB, BPZ, BPS and BPAP) in these samples using gas chromatography coupled to tandem mass spectrometry. BPA, BPF and BPS were frequently found in spot samples (>80%), while bisphenol AP (BPAP) was detected in 43% of spot samples. Calculations of intra-class correlation coefficients (ICCs) showed that reproducibility of these four bisphenols was relatively poor (<0.01-0.200) but improved when concentrations were corrected for urine dilution using creatinine levels (0.128-0.401). Of these four bisphenols, BPF showed the best reproducibility (ICC 0.200-0.439) and BPS the most variability (ICC <0.01-0.128). In general, the within-participant variability of bisphenol levels was the largest contributor to the total variance (47-100%). We compared repeated first morning voids to 24 h pooled urine and found no significantly different concentrations for BPA, BPF, BPS, or BPAP. Levels of BPA and BPF differed significantly depending on the sampling time throughout the day. The findings in this study suggest that collecting multiple samples per participant over a few days, in predefined time windows throughout the day, could result in a more reliable estimation of internal exposure to bisphenols.

Biomonitoring and temporal trends of bisphenols exposure in Japanese school children

The widely used chemical bisphenol A (BPA), applied in various consumer products, has been under scrutiny in the past 20 years due to its widespread detection in humans and potential detrimental effects on human health. Following the implementation of restrictions and phase-out initiatives, BPA has been replaced by other structurally similar bisphenols, which have not yet received the same level of research attention. In this study, we aimed to 1) investigated the internal exposure to seven bisphenols in morning void urine samples (n = 396) from 7-year-old children from Hokkaido, Japan and 2) assess possible time trends in the concentrations of bisphenols between 2012 and 2017. Information on demographic, indoor environment and dietary characteristics of participants were acquired through a self-administered questionnaire. All bisphenols were detected in the study population, with BPA, BPF and BPS showing detection frequencies >50%. Concentrations of bisphenols measured in the Japanese children in our study were generally lower compared to studies worldwide. We found that BPA concentrations decreased significantly over the study time period (average 6.5% per year), whereas BPS rose with 2.8% per year. Levels of BPA and BPF were higher in autumn compared to winter. Higher urinary BPF levels were significantly associated with higher concentrations of the oxidative stress biomarker, 8-hydroxy-2'-deoxyguanosine (8-OHdG). BPA and BPF levels were higher in children from families with lower household income. Bisphenol concentrations were significantly influenced by some other personal (e.g. household income), food intake (e.g. vegetables and cow milk) and indoor housing characteristics (e.g. flooring). This is the first study to report longitudinal time trends of bisphenols in Japan. The presented findings imply that further research on bisphenols is warranted in the future to monitor whether these time trends continue.

The presence of bisphenol A in the thermal paper in the face of changing European regulations - A comparative global research

Bisphenol A (BPA) is used as a color developer in a thermal paper that after a heating process reacts with a leuco dye and changes it to a colored form. Receipts from cash registers are considered as the main source of consumer exposure to bisphenols together with polycarbonates and epoxy resins. Levels of BPA and its possible alternatives were determined in thermal paper samples collected between May 2018 and May 2019 in 22 European and 17 non-European countries on all inhabited continents (220 samples in total, 133 of which were from Europe and 87 from other countries). These measurements were intended to check the level of BPA presence in receipts originating from different countries, especially from Europe in the light of changing regulations restricting its use. The effect of thermal printing on developer content was also analyzed, but no major changes in concentrations of bisphenols were observed during the process. Thus, printed receipts could be used for the determination of bisphenol content. Analysis of receipts from 39 countries has shown that BPA is still the most common compound used around the world with 69% samples containing this color developer. Among other tested bisphenols, BPS was used as a color developer in 20% samples, but it was noted that all samples collected from Japan and the United States of America were found to contain only BPS. Other bisphenols (F, AF, E, and B) considered as possible alternatives for BPA were detected only at trace levels or not detected at all, which showed that they were not used as color developers. The relatively large use of BPS as a BPA substitute is worrying because this compound not only has similar endocrine properties but is also poorly biodegradable. Besides, its relatively high polarity facilitates spreading in the environment.

Human in vitro percutaneous absorption of bisphenol S and bisphenol A: A comparative study

Bisphenol A (BPA) is widely used in industrial products. Due to the toxicity of this compound, and to comply with restrictions and regulations, manufacturers have progressively replaced it by substitutes. One of the main substitutes used is bisphenol S (BPS). Despite increasing use in many products, the effects of BPS on human health have been little investigated, and studies on percutaneous BPS absorption and particularly toxicokinetic data are lacking. However, the endocrine-disrupting activity of BPA and BPS appears comparable. Dermal contact is a significant source of occupational exposure and is the main route during handling of bisphenol-containing receipts by cashiers. Here, percutaneous BPS absorption was investigated and compared to that of BPA. Experiments were performed according to OECD guidelines. Test compounds dissolved in a vehicle - acetone, artificial sebum or water - were applied in vitro to fresh human skin samples in static Franz diffusion cells. Flux, cumulative absorbed dose and distribution of dose recovered were measured. BPA absorption was vehicle-dependent ranging from 3% with sebum to 41% with water. BPS absorption was much lower than BPA absorption whatever the vehicle tested (less than 1% of applied dose). However, depending on the vehicle 20% to 47% of the applied BPS dose remained in the skin, and was consequently potentially absorbable. Both BPA and BPS were mainly absorbed without biotransformation. Taken together, these results indicate that workers may be exposed to BPS through skin when handling products containing it. This exposure is of concern as its toxicity is currently incompletely understood.

Direct analysis in real time accurate mass spectrometry determination of bisphenol A in thermal printing paper

Contact with thermal printing paper is a relevant source of dermal exposure to unbonded bisphenol A (BPA). In order to limit this exposure route, the European Union has introduced a drastic reduction in the maximum allowed concentration of BPA in thermal paper produced after beginning of year 2020. This study investigates the suitability of direct analysis in real time (DART), combined with accurate mass spectrometry, as a faster alternative to chromatography-based methods for the quantitative determination of BPA, and three analogues species, in receipts and tickets usually printed on thermal paper. The ionization efficiency of these compounds is evaluated under different conditions, and the effect of instrumental parameters of the DART source in the observed responses is discussed. The yield of the DART desorption-ionization process was greatly improved when compounds are previously converted into their acetyl derivatives; thereafter, the temperature of electronically excited helium atoms was the most relevant of the evaluated instrumental parameters. Under optimized conditions, the reported method provided recoveries in the range from 90 to 110%, a limit of quantification of 0.004% (w:w), well below the maximum concentration established after 2020 for BPA (0.02%, w:w), and permitted to perform duplicate determinations of each sample extract with a response time around 1 min. The accuracy of BPA levels found in non-spiked samples was confirmed using GC-EI-MS as reference technique. BPA was systematically noticed in the processed samples with concentrations ranging from 0.005% to more than 6%.