Solvent-free microwave extraction of bioactive compounds provides a tool for green analytical chemistry

Evaluation of lavender essential oils and by-products using microwave hydrodistillation and conventional hydrodistillation

This study investigated the impact of two extraction methods, traditional hydrodistillation (TDH) and microwave-assisted hydrodistillation (MAH), on the essential oil yield and chemical profile of Lavandula angustifolia L., as well as the bioactive potential of the resulting wastewater. Essential oil composition was analyzed via GC-MS, revealing similar qualitative and quantitative profiles for both methods, with α-terpinolene and (-)borneol as major constituents. Wastewater analysis via LC-MS/MS and spectrophotometric assays demonstrated the presence of significant total phenolic content (3.29-1.78 mg GAE/g) and 32 individual phenolics (463.1 µg/kg for TDH; 479.33 µg/kg for MAH). These findings suggest that both essential oil and wastewater obtained by either method possess considerable bioactive potential, with the MAH method potentially offering advantages over TDH for essential oil extraction. Further exploration of wastewater applications in various industrial sectors is warranted.

Microwave-assisted extraction optimization of sesquiterpene lactones from Inula helenium roots: A sustainable approach to reduce energy consumption and carbon footprint

Inula helenium roots are consumed as natural flavor components and raw or cooked as food, and their extracts are rich in sesquiterpene lactones such as alantolactone (AL) and isoalantolactone (IAL), which have recently attracted great attention due to their pharmacological properties. The industrial utilization of these compounds requires the development of green, efficient, cost-effective, and sustainable extraction protocols. Therefore, this study focused on the optimization of microwave-assisted extraction (MAE) process variables using Face-Centered Central Composite Design (FC-CCD). Then, maceration was applied as a conventional technique, and these techniques were compared in terms of extraction efficiency, morphological changes, antimicrobial activities, carbon emissions, and energy consumption. As a result, optimal MAE conditions, i.e., EtOH: water ratio (X 1) = 100:0, liquid/sample ratio (X 2) = 30:1 mL/g, microwave power (X 3) = 300 W, and irradiation time (X 4) = 5 min, were obtained with AL and IAL yields of 54.99 ± 0.11 (mg/g) and 48.40 ± 0.19 (mg/g), respectively. The extract obtained by MAE had similar or better activity than positive controls in most cases and formed the largest inhibition zones against E. coli (29.5 ± 0.71 mm) and A. niger (34.75 ± 1.06 mm). Morphological changes of I. helenium roots after extraction were observed by scanning electron microscopy. Additionally, MAE was 43.4 times faster than maceration, resulting in 228.6 times less energy consumption and carbon emissions. Based on these findings, it is recommended to use MAE as an industrial green technique for the extraction of sesquiterpene lactones with potential applications in nutraceuticals and food products in terms of sustainable economy and environmental protection.

Organic and Biogenic Nanocarriers as Bio-Friendly Systems for Bioactive Compounds' Delivery: State-of-the Art and Challenges

"Green" strategies to build up novel organic nanocarriers with bioperformance are modern trends in nanotechnology. In this way, the valorization of bio-wastes and the use of living systems to develop multifunctional organic and biogenic nanocarriers (OBNs) have revolutionized the nanotechnological and biomedical fields. This paper is a comprehensive review related to OBNs for bioactives' delivery, providing an overview of the reports on the past two decades. In the first part, several classes of bioactive compounds and their therapeutic role are briefly presented. A broad section is dedicated to the main categories of organic and biogenic nanocarriers. The major challenges regarding the eco-design and the fate of OBNs are suggested to overcome some toxicity-related drawbacks. Future directions and opportunities, and finding "green" solutions for solving the problems related to nanocarriers, are outlined in the final of this paper. We believe that through this review, we will capture the attention of the readers and will open new perspectives for new solutions/ideas for the discovery of more efficient and "green" ways in developing novel bioperformant nanocarriers for transporting bioactive agents.

Energy Applications of Ionic Liquids: Recent Developments and Future Prospects

Ionic liquids (ILs) consisting entirely of ions exhibit many fascinating and tunable properties, making them promising functional materials for a large number of energy-related applications. For example, ILs have been employed as electrolytes for electrochemical energy storage and conversion, as heat transfer fluids and phase-change materials for thermal energy transfer and storage, as solvents and/or catalysts for CO2 capture, CO2 conversion, biomass treatment and biofuel extraction, and as high-energy propellants for aerospace applications. This paper provides an extensive overview on the various energy applications of ILs and offers some thinking and viewpoints on the current challenges and emerging opportunities in each area. The basic fundamentals (structures and properties) of ILs are first introduced. Then, motivations and successful applications of ILs in the energy field are concisely outlined. Later, a detailed review of recent representative works in each area is provided. For each application, the role of ILs and their associated benefits are elaborated. Research trends and insights into the selection of ILs to achieve improved performance are analyzed as well. Challenges and future opportunities are pointed out before the paper is concluded.

Natural complex substances: From molecules to the molecular complexes. Analytical and technological advances for their definition and differentiation from the corresponding synthetic substances

Natural complex substances (NCSs) are a heterogeneous family of substances that are notably used as ingredients in several products classified as food supplements, medical devices, cosmetics and traditional medicines, according to the correspondent regulatory framework. The compositions of NCSs vary widely and hundreds to thousands of compounds can be present at the same time. A key concept is that NCSs are much more than the simple sum of the compounds that constitute them, in fact some emerging phenomena are the result of the supramolecular interaction of the constituents of the system. Therefore, close attention should be paid to produce and characterize these systems. Today many natural compounds are produced by chemical synthesis and are intentionally added to NCSs, or to formulated natural products, to enhance their properties, lowering their production costs. Market analysis shows a tendency of people to use products made with NCSs and, currently, products made with ingredients of natural origin only are not conveniently distinguishable from those containing compounds of synthetic origin. Furthermore, the uncertainty of the current European regulatory framework does not allow consumers to correctly differentiate and identify products containing only ingredients of natural origin. The high demand for specific and effective NCSs and their high-cost offer on the market, create the conditions to economically motivated sophistications, characterized by the addition of a cheap material to a more expensive one, just to increase profit. This type of practice can concern both the addition of less valuable natural materials and the addition of pure artificial compounds with the same structure as those naturally present. In this scenario, it becomes essential for producers of natural products to have advanced analytical techniques to evaluate the effective naturalness of NCSs. In fact, synthetically obtained compounds are not identical to their naturally occurring counterparts, due to the isotopic composition or chirality, as well as the presence of different trace metabolites (since pure substances in nature do not exist). For this reason, in this review, the main analytical tests that can be performed to differentiate natural compounds from their synthetic counterparts will be highlighted and the main analytical technologies will be described. At the same time, the main fingerprint techniques useful for characterizing the complexity of the NCSs, also allowing their identification and quali-quantitative evaluation, will be described. Furthermore, NCSs can be produced through different manufacturing processes, not all of which are on the same level of quality. In this review the most suitable technologies for green processes that operate according to physical extraction principles will be presented, as according to the authors they are the ones that come closest to creating more life-cycle compatible NCSs and that are well suited to the European green deal, a strategy with the aim of transforming the EU into a sustainable and resource-efficient society by 2050.

Recent bioanalytical methods for the isolation of bioactive natural products from genus Codonopsis

INTRODUCTION

Chromatography and spectroscopy are nowadays well-validated techniques allowing to isolate and purify different class of natural products from the genus Codonopsis. Several categories of phytochemicals with drug like properties have been selectively extracted, isolated, characterised by this methodology.

OBJECTIVES

The present review aims to provide up-to-date and comprehensive information on the chromatography, phytochemistry and pharmacology of natural products of Codonopsis with an emphasis on the search for natural products having various biological activities and the semi-synthetic derivatives of bioactive ones and to highlight current gaps in knowledge.

MATERIALS AND METHODS

A literature search was performed in the SciFinder Scholar, PubMed, Medline, and Scopus databases.

RESULTS

During the period covered in this review, several classes of compounds have been reported from genus Codonopsis. Codonopsis pilosula and Codonopsis lanceolata are the most popular in the genus especially as per phytochemical and bioactive studies. Phytochemical investigation demonstrates that Codonopsis species contain mainly xanthones, flavonoids, alkaloids, polyacetylenes, phenylpropanoids, triterpenoids and polysaccharides, which contribute to numerous bioactivities. The major bioactive compounds isolated were used for semi-synthetic modification to increase the chance to discover lead compound.

CONCLUSIONS

It can be concluded that genus Codonopsis has been used as traditional medicines and food materials around the world over years due to chemical constituents with diverse structural types, exhibiting extensive pharmacological activities in immune system, blood system, cardiovascular system, central nervous system, digestive system, and so forth, with almost no obvious toxicity and side effect. Therefore, Codonopsis can be used as a promising ethnopharmacological plant source.

Nutritionally rich biochemical profile in essential oil of various Mentha species and their antimicrobial activities

The Mentha species of family Lamiaceae are famous for their flavor and are commercially used in many food products worldwide. They are widely used to cure digestive problems as well as a natural source of antioxidants and antimicrobials. In this report, the essential oils (EOs) of five Mentha species, namely Mentha citrata, Mentha x piperita, Mentha pulegium, Mentha spicata, and Mentha suaveolens were extracted and their chemical diversity was investigated through gas chromatography-mass spectroscopy (GC-MS). The differential doses (5, 10, and 15 µl) of EOs were tested for antimicrobial potential against two gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis), five gram-negative bacteria (Escherichia coli, Pseudomonas aeroginosa, Salmonella typhi, Proteus mirabilis and Klebsiella pneumoniae) and a fungal strain (Candida albicans). The GC-MS results revealed the major components in the EOs were Carvone, Linalool, Hotrienol, Menthol, Isopulegone, Furanone, Piperitone, and Thymol. Moreover, the higher dose (15 µl) of EOs of M. citrata inhibited the growth of S. typhi and C. albicans (35.8 ± 2.4 and 35.2 ± 2.5 mm), M. x piperita inhibited E. coli, B. subtilis, and C. albicans (28.5 ± 3.5, 26.1 ± 2.1, and 25.4 ± 1.1 mm), M. pulegium inhibited K. pneumoniae, B. subtilis, and C. albicans (26.8 ± 1.8, 24.2 ± 2.2, and 25.3 ± 0.9 mm), M. spicata significantly inhibited S. typhi and B. subtilis (35.7 ± 2.7 and 36.3 ± 2.1 mm), and M. suaveolens inhibited K. pneumoniae, C. albicans, and S. typhi (30.8 ± 1.9, 26.9 ± 1.1, and 20.1 ± 0.8 mm) respectively. This study concluded that the EOs of M. citrata was effective against S. typhi and C. albicans. The M. x piperita exhibited strong activities against E. coli, B. subtilis, and C. albicans. Furthermore, the M. pulegium strongly inhibited the growth of K. pneumoniae and C. albicans. The EO of M. spicata was more potent against S. typhi and B. subtilis, while the M. suaveolens was comparatively more effective against S. typhi, K. pneumoniae, and C. albicans. These EOs offer a natural source of antimicrobial agents with high commercial values and social acceptance and could be scale up by food and pharmaceutical industries to control pathogenic diseases.

Silver-Based Surface Plasmon Sensors: Fabrication and Applications

A series of novel phenomena such as optical nonlinear enhancement effect, transmission enhancement, orientation effect, high sensitivity to refractive index, negative refraction and dynamic regulation of low threshold can be generated by the control of surface plasmon (SP) with metal micro-nano structure and metal/material composite structure. The application of SP in nano-photonics, super-resolution imaging, energy, sensor detection, life science, and other fields shows an important prospect. Silver nanoparticles are one of the commonly used metal materials for SP because of their high sensitivity to refractive index change, convenient synthesis, and high controllable degree of shape and size. In this review, the basic concept, fabrication, and applications of silver-based surface plasmon sensors are summarized.

Comparison of Three Different Extraction Methods on Osmanthus Volatile Oil: Aroma and Biological Activity

The osmanthus volatile oil was welcomed by consumers even if the high price since the unique and pleasant odor. Meanwhile, the low yield of osmanthus volatile oil restricts industrial production. In this work, an osmanthus volatile oil was obtained by means of a novel ultrasonic-assisted flash extraction method and was compared with the oil from hydrodistillation and supercritical fluid extraction on yield, aroma, and biological activities. The volatile oil obtained from the ultrasonic-assisted flash extraction was obtained with the petroleum ether and got a high yield at 3.51 % within a 40-min process, an increase of nearly 81 % from the single solvent extraction. This oil also showed a high aroma intensity and aroma compound concentration. Meanwhile, the oil also has the highest antioxidant ability but lower antibacterial activity against oil from hydrodistillation. It was considered that this work was helpful for the optimization of the extraction method of osmanthus volatile oil.

Solvent-Free Microwave Extraction of Essential Oils from Litsea cubeba (Lour.) Pers. at Different Harvesting Times and Their Skin-Whitening Cosmetic Potential

Litsea cubeba fruit, which has the highest content of essential oils in the plant, is an important woody oil plant resource. In this study, the influence of the solvent-free microwave extraction (SFME) and hydrodistillation (HD) techniques on the extraction of L. cubeba fruit essential oils was investigated in terms of yield, kinetics, and chemical composition, where the former conditions were optimized by the response surface design. The maximal essential oil yield was obtained under the optimal SFME process conditions (442 W and 24 min), where the irradiation time was the most important variable (p < 0.0001). Regardless of the extraction method used, the influence of harvesting time on L. cubeba fruit essential oils were quantitatively and qualitatively analyzed afterwards, where the SFME essential oil from July showed its superiority over the others regarding its higher extraction yield and better bioactivities. Compared with the HD method, the SFME approach could significantly enhance the yield of essential oils extracted from June to August by nearly 47% with the advantages of saving energy and low environmental impact. Interestingly, the SFME method could selectively extract monoterpene hydrocarbons such as D-limonene with relation to different compositions and bioactivities. Moreover, SFME essential oil showed a better inhibitory effect on tyrosinase and melanogenesis, indicating its skin-whitening potential as a new promising natural cosmetic ingredient.

Synthesis of magnetic nanocarbon using palm oil as the green precursor via microwave-assisted arc for wastewater treatment

The presence of metal with microwave irradiation has always invited controversial arguments as the metal will catch on fire easily. But interestingly, researchers found that arc discharge phenomena provide a promising way for molecule cracking to synthesize nanomaterials. This study developed a single-step yet affordable synthesis approach that combines microwave heating and arcing in transforming crude palm oil into magnetic nanocarbon (MNC), which can be considered a new alternative for the palm oil sectors. It involves synthesizing the medium at a partial inert condition with constant coiled stainless steel metal wire (dielectric media) and ferrocene (catalyst). This approach successfully demonstrates heating at a temperature ranging from 190.9 to 472.0 °C with different synthesis times (10-20 min). The produced MNC shows formations of spheres with average sizes of 20.38-31.04 nm, mesoporous structure (SBET: 14.83-151.95 m²/g), and high content of fixed carbon (52.79-71.24wt%), and the ratio of the D and G bands (I_D/I_G) is 0.98-0.99. The formation of new peaks in the FTIR spectra (522.29-588.48 cm^-1) supports the appearance of the FeO compounds from the ferrocene. The magnetometer shows high magnetization saturation (22.32-26.84 emu/g) in ferromagnetic materials. The application of the MNC in wastewater treatment has been demonstrated by evaluating their adsorbent capability with Methylene Blue (MB) adsorption test at a different concentrations varying between 5 and 20 ppm. The MNC produced at synthesis time (20 min) shows the highest adsorption efficiency (10.36 mg/g) compared to others, with 87.79% removal of MB dye. As a result, the value for Langmuir is not promising compared to Freundlich, with R² being around 0.80, 0.98, and 0.99 for MNC synthesized at 10 min (MNC10), 15 min (MNC15), and 20 min (MNC20), respectively. Hence, the adsorption system is in a heterogeneous condition. The microwave-assisted arcing thereby presents a promising approach to transforming CPO into MNC that could remove the hazardous dye.

Microwave hydrodiffusion and gravity model with a unique hydration strategy for exhaustive extraction of anthocyanins from strawberries and raspberries

This study aimed to verify if microwave hydrodiffusion and gravity (MHG) could efficiently extract anthocyanins from strawberries and raspberries with low environmental impact and costs. Our findings revealed that it was possible to extract 69 and 64% anthocyanins from the strawberries and raspberries in a single extraction step, respectively. When the co-product (product remaining after extracting in natura fruits) was hydrated with green solvents and subjected to re-extraction, it was possible to exhaustively extract the anthocyanins from both fruits. Using the Green Analytical Procedure Index (GAPI), the MHG proved to cause low environmental impact due to the solvents used, enabling the reuse of the co-product for food and pharmaceutical products application. Moreover, the MHG was economically viable, and the sample pretreated with distilled water was the most indicated re-extraction method. The MHG process proved to be exhaustive for strawberry and raspberry anthocyanins, thus demonstrating to be an excellent alternative for sustainable extraction.

Study of the energetic, exergetic, and thermal balances of a solar distillation unit in comparison with a conventional system during the distillation of rosemary leaves

The solar energy produced by Scheffler parabola (10 m²) is not fully exploited by the solar distillation system of aromatic and medicinal plants. In this work, the optical losses in the primary and secondary reflectors, and the thermal losses at each part of this system (solar still, steam line, condenser) were determined. A thermal energetic and exergetic analysis were also performed for a solar distillation system of rosemary leaves. For average intensity radiation of 849.1W/m² and 6 Kg of rosemary leaves during 4 h of distillation, exergy and optical efficiencies of the system achieved up to 26.62% and 50.97%, respectively. The thermal efficiency of the solar still, steam line, and condenser is about 94.80%, 94.30%, and 87.76%, respectively. The essential oil yield per unit of consumed energy and the total efficiency of the solar distillation system, taking into account the heat losses in the solar still, steam line, and condenser, as well as the optical losses in the two reflectors, is 6.18 mL/ kWh and 40.00%, respectively. The efficiency can be as high as 42.42 % if the steam line is insulated. Moreover, the comparison between the solar steam distillation and conventional steam distillation shows that solar distillation is much more efficient since it gives better results and especially it avoids the emission of 12.10 kg of CO₂ during extraction.

Extraction of functional extracts from berries and their high quality processing: a comprehensive review

Berry fruits have attracted increasing more attention of the food processing industry as well as consumers due to their widely acclaimed advantages as highly effective anti-oxidant properties which may provide protection against some cancers as well as aging. However, the conventional extraction methods are inefficient and wasteful of solvent utilization. This paper presents a critical overview of some novel extraction methods applicable to berries, including pressurized-liquid extraction, ultrasound-assisted extraction, microwave-assisted extraction, supercritical fluid extraction, enzyme-assisted extraction as well as some combined extraction methods. When combined with conventional methods, the new technologies can be more efficient and environmentally friendly. Additionally, high quality processing of the functional extracts from berry fruits, such as refined processing technology, is introduced in this review. Finally, progress of applications of berry functional extracts in the food industry is described in detail; this should encourage further scientific research and industrial utilization.

A review of the recent trend in the synthesis of carbon nanomaterials derived from oil palm by-product materials

Grown only in humid tropical conditions, the palm tree provides high-quality oil essential for cooking and personal care or biofuel in the energy sector. After the refining process, this demand could cause numerous oil palm biomass waste management problems. However, the emergence of carbon nanomaterials or CNMs could be a great way to put this waste to a good cause. The composition of the palm waste can be used as a green precursor or starting materials for synthesizing CNMs. Hence, this review paper summarizes the recent progress for the CNMs production for the past 10 years. This review paper extensively discusses the method for processing CNMs, chemical vapor deposition, pyrolysis, and microwave by the current synthesis method. The parameters and conditions of the synthesis are also analyzed. The application of the CNMs from palm oil and future recommendations are also highlighted. Generally, this paper could be a handy guide in assisting the researchers in exploring economic yet simple procedures in synthesizing carbon-based nanostructured materials derived from palm oil that can fulfill the required applications.

GRAPHICAL ABSTRACT

A cross talk based critical analysis of solvent free microwave extraction to accentuate it as the new normal for extraction of essential oil: an attempt to overhaul the science of distillation through a comprehensive tutelage

Microwave-assisted extraction (MAE) is a sustainable non-contact heating source and has been extensively researched for extraction of plant bioactives. There are various derivatives or modules available for MAE and solvent free microwave extraction (SFME) is one of them where by operational aspects of MAE have been maneuvered to make it compatible for extraction of essential oil (EO). This article makes an attempt to overhaul the science of distillation by revisiting SFME and trying to learn through a comprehensive tutelage comprising of 20 years of published literature in Web of Science so that a shrewd decision can be obtained through a cross talk based critical analysis on the science SFME. A total of 312 articles within the time frame of 2001-2020 were extracted from WOS and critically analyzed. Considering the various uncertainties involved with SFME the articles establishes some global working standards and tries to explore the dynamic relationship between plant part/genus and microwave power, microwave power and time, microwave power and extracted volatile principles, prioritizes plant family selection and also presents a research blueprint of SFME. A techno-commercial feasibility study has been presented for smooth industrial transition of SFME. The tutelage presented decodes the publication trends and SFME blueprint.

The In Situ Hydrothermal and Microwave Syntheses of Zinc Oxides for Functional Cement Composites

This study presents the results of research on cement mortars amended with two zinc oxides obtained by two different methods: hydrothermal ZnO-H and microwave ZnO-M. Our work indicates that, in contrast to spherical ZnO-H, ZnO-M was characterized by a columnar particle habit with a BET surface area of 8 m2/g, which was four times higher than that obtained for hydrothermally obtained zinc oxide. In addition, ZnO-M induced much better antimicrobial resistance, which was also reported in cement mortar with this oxide. Both zinc oxides showed very good photocatalytic properties, as demonstrated by the 4-chlorophenol degradation test. The reaction efficiency was high, reaching the level of 90%. However, zinc oxides significantly delayed the cement binder setting: ZnO-H by 430 min and ZnO-M by 380 min. This in turn affected the increments in compressive strength of the produced mortars. No significant change in compressive strength was observed on the first day of setting, while significant changes in the strengths of mortars with both zinc oxides were observed later after 7 and 28 days of hardening. As of these times, the compressive strengths were about 13-15.5% and 12-13% higher than the corresponding values for the reference mortar, respectively, for ZnO-H and ZnO-M. There were no significant changes in plasticity and flexural strength of mortars amended with both zinc oxides.

An Overview on Total Valorization of Litsea cubeba as a New Woody Oil Plant Resource toward a Zero-Waste Biorefinery

With the increasing global demand for edible oils and the restriction of arable land minimum in China, woody oil plants have gradually become the optimal solution to cover the shortage of current edible oil supply and to further improve the self-sufficiency rate. However, due to the lack of knowledge and technique, problems like “how to make full use of these plant resources?” and “how to guide consumers with reasonable data?” limit the development of woody oilseed industry towards a sustainable circular economy. In this review, several emerging unique woody oil plants in China were introduced, among which Litsea cubeba as a new woody oil plant was highlighted as a reference case based on its current research progress. Unlike other woody oil plants, essential oil rather than oil from Litsea cubeba has always been the main product through the years due to its interesting biological activities. Most importantly, its major component, citral, could be the base for other synthesized perfume compounds with added value. Moreover, the sustainable biorefinery of large amounts of waste residual after Litsea cubeba essential oil processing is now technically feasible, which could inspire a total valorization pathway for other woody oil plants to make more competitive plant-based products with both economic, social, and ecological benefits.

Comparison of ultrasound and microwave assisted extraction of diosgenin from Trigonella foenum graceum seed

From the recent market trend, there is a huge demand for the bioactive compounds from various food matrices that could be capable enough to combat the emerging health effects in day-to-day life. Fenugreek is a well-known spice from ancient times for its medicinal and health benefits. In the present study, two methods of green extraction microwave (MAE) and ultrasound (UAE) assisted were studied in regard of extraction of fenugreek diosgenin. In this study, solvent type (acetone, ethanol, hexane and petroleum ether), solvent concentration (40, 60, 80 and 100%) and treatment time (1.5, 3.0, 4.5 and 6.0 min and 30, 40, 50 and 60 min for MAE and UAE method respectively) was varied to observe the effect of these parameters over extract yield and diosgenin content. The results of this study revealed that treatment time, type of solvent and its concentration and method adopted for extraction of diosgenin has significant effect. In relation with better yield extract and diosgenin content, the yield of fenugreek seed extract was 7.83% with MAE and 21.48% with UAE of fenugreek seed powder at 80% ethanol concentration at 6 and 60 min respectively. The content of diosgenin was observed in fenugreek seed powder extract was 35.50 mg/100 g in MAE and 40.37 mg/100 g in UAE with 80% ethanol concentration at 6 and 60 min respectively. The overall range of yield of fenugreek extract was varied from 1.04% to 32.48% and diosgenin content was 15.82 mg/100 g to 40.37 mg/100 g of fenugreek seed powder including both extraction methods. This study revealed that UAE would impose better ways for preparing fenugreek extract and observing diosgenin content from fenugreek seeds.

Six Common Herbs with Distinctive Bioactive, Antioxidant Components. A Review of Their Separation Techniques

Rosemary, oregano, pink savory, lemon balm, St. John’s wort, and saffron are common herbs wildly grown and easily cultivated in many countries. All of them are rich in antioxidant compounds that exhibit several biological and health activities. They are commercialized as spices, traditional medicines, or raw materials for the production of essential oils. The whole herbs or the residues of their current use are potential sources for the recovery of natural antioxidant extracts. Finding effective and feasible extraction and purification methods is a major challenge for the industrial production of natural antioxidant extracts. In this respect, the present paper is an extensive literature review of the solvents and extraction methods that have been tested on these herbs. Green solvents and novel extraction methods that can be easily scaled up for industrial application are critically discussed.

Comparison of microwave-assisted techniques for the extraction of antioxidants from Citrus paradisi Macf. biowastes

Microwave-assisted extraction (MAE) and solvent-free microwave extraction and Soxhlet extraction were applied to Ray Ruby grapefruit leaves (Citrus paradisi Macf.) to compare extract efficiency. Face centered composite designs were constructed via response surface methodology. Effects of factors of MAE were investigated on total phenolic content (TPC) and naringin content (NC). The optimized conditions were established as 1.4 kWL^-1 for microwave power density, 20.00 gL^-1 for solid/solvent ratio, 218.180 s for extraction time, while responses were calculated as 14.210 mg of gallic acid equivalent per g of the dried leaf (mg GAE g^-1DL) and 13.198 mg of naringin per g of dried leaf (mg Ng^-1DL) for TPC and NC, respectively. SFME and classical Soxhlet methods were also conducted for comparison reasons.

Valorization of fruits and vegetable wastes and by-products to produce natural pigments

Synthetic pigments from petrochemicals have been extensively used in a wide range of food products. However, these pigments have adverse effects on human health that has rendered it obligatory to the scientific community in order to explore for much safer, natural, and eco-friendly pigments. In this regard, exploiting the potential of agri-food wastes presumes importance, extracted mainly by employing green processing and extraction technologies. Of late, pigments market size is growing rapidly owing to their extensive uses. Hence, there is a need for sustainable production of pigments from renewable bioresources. Valorization of vegetal wastes (fruits and vegetables) and their by-products (e.g. peels, seeds or pomace) can meet the demands of natural pigment production at the industrial levels for potential food, pharmaceuticals, and cosmeceuticals applications. These wastes/by-products are a rich source of natural pigments such as: anthocyanins, betalains, carotenoids, and chlorophylls. It is envisaged that these natural pigments can contribute significantly to the development of functional foods as well as impart rich biotherapeutic potential. With a sustainability approach, we have critically reviewed vital research information and developments made on natural pigments from vegetal wastes, greener extraction and processing technologies, encapsulation techniques and potential bioactivities. Designed with an eco-friendly approach, it is expected that this review will benefit not only the concerned industries but also be of use to health-conscious consumers.

Grapevine as a Rich Source of Polyphenolic Compounds

Grapes are rich in primary and secondary metabolites. Among the secondary metabolites, polyphenolic compounds are the most abundant in grape berries. Besides their important impacts on grape and wine quality, this class of compounds has beneficial effects on human health. Due to their antioxidant activity, polyphenols and phenolic acids can act as anti-inflammatory and anticancerogenic agents, and can modulate the immune system. In grape berries, polyphenols and phenolic acids can be located in the pericarp and seeds, but distribution differs considerably among these tissues. Although some classes of polyphenols and phenolic acids are under strict genetic control, the final content is highly influenced by environmental factors, such as climate, soil, vineyard, and management. This review aims to present the main classes of polyphenolic compounds and phenolic acids in different berry tissues and grape varieties and special emphasis on their beneficial effect on human health.

A Box-Behnken Design for Optimal Green Extraction of Compounds from Olive Leaves That Potentially Activate the AMPK Pathway

Olive leaves contain bioactive compounds that have been shown to activate AMP-activated protein kinase (AMPK), which decreases intracellular lipid accumulation. Microwave-assisted extraction (MAE) is a green extraction technique that is frequently used in the recovery of phenolic compounds from plants. Thus, in this study, a Box-Behnken design was used to optimize MAE conditions such as temperature, percentage of ethanol and extraction time to obtain the maximum content of total compounds and compounds that activate AMPK. To this end, all extracts were characterized by High-Performance Liquid Chromatography Coupled to Electrospray Ionization Time-of-Flight Mass Spectrometry (HPLC-ESI-TOF-MS). The optimum conditions to obtain the highest content of total compounds were 123 °C, 100% of ethanol/water (v/v) and 23 min, whereas the optimum conditions for the highest amount of compounds that activate AMPK were 111 °C, 42% of ethanol/water (v/v) and 23 min. Thus, a multi-analysis by desirability was carried out to establish MAE optimal conditions for both responses. The optimum conditions were 111 °C, 100% EtOH and 23 min with a desirability of 0.97, which means that the responses are close to their individual optimal values. As a result, the olive leaf extract obtained at these optimal MAE conditions has great potential to be effective in the treatment of obesity.

Applications of Nonconventional Green Extraction Technologies in Process Industries: Challenges, Limitations and Perspectives

This study reviewed five different nonconventional technologies which are aligned with green concepts of product recovery from raw materials on industrial scale, with minimal energy consumption and chemical use. Namely, this study reviewed supercritical fluid extraction (SCFE), pressurized liquid extraction (PLE), microwave-assisted extraction (MAE), ultrasound extraction (UAE) and pulsed electric fields extraction (PEFE). This paper provides an overview of relevant innovative work done in process industries on different plant matrices for functional value-added compounds and byproduct production. A comparison of the five extraction methods showed the supercritical CO2 (SC-CO2) process to be more reliable despite some limitations and challenges in terms of extraction yield and solubility of some bioactive compounds when applied in processing industries. However, these challenges can be solved by using ionic liquids as a trainer or cosolvent to supercritical CO2 during the extraction process. The choice of ionic liquid over organic solvents used to enhance extraction yield and solubility is based on properties such as hydrophobicity, polarity and selectivity in addition to a safe environment.

Phenolic Compounds Extraction of Arbutus unedo L.: Process Intensification by Microwave Pretreatment

Arbutus unedo L., commonly known as the strawberry-tree fruit, is an endemic species of the Mediterranean flora. Microwave extraction technology has been considered as a fast and “green” method for the production of extracts rich in bioactive compounds, although the energy consumption is high. To overcome this bottleneck, microwave was used as a pretreatment procedure in short time periods. This technique promotes the burst of intracellular vacuoles leading to an increase in the lixiviation of phenolic compounds. Different approaches were tested, namely a solvent-free irradiation (SFI), a solvent-assisted irradiation (SAI) and a pressurized solvent-assisted irradiation (PSAI). After irradiation, a solid–liquid extraction procedure was performed using a mixture of water and ethanol. A kinetic evaluation of the total phenolic content (TPC) was performed using the Folin–Ciocalteu method. For the total anthocyanin content, a UV-spectrophotometric method was used. HPLC-UV and LC-MS were used for TPC and identification of present compounds. Microwave irradiation led to an increase in TPC of extracts after SAI (52%) and PSAI (66%) along with a reduction in time of extraction from 30 min to less than 2 min. The anthocyanin content also increased by 66% for the SAI and PSAI extractions.

Optimized microwave assisted extraction (MAE) of alkaloids and polyphenols from Berberis roots using multiple-component analysis

Berberis, one of the major sources of berberine and polyphenols, is widely accepted genus for its medicinal properties. The inclusion of these phytochemicals in different health formulations has widened its scope in pharmaceuticals and nutraceuticals. In the present study, multi-component analysis (MCA) has been used to extract these nutraceutical compounds from Berberis jaeschkeana roots under microwave-assisted extraction (MAE) conditions. To determine the optimum extraction condition, different factors, including, microwave power, sample to solvent ratio, irradiation time, solvent pH and solvent concentration were tested under 42 experiments. The MCA includes, Plackett-Burmen and Central Composite Design and analyzes model fitness, regression coefficient (β), analysis of variance (ANOVA) and 3D response curve. The results showed significant model fitness and involvement of linear, quadratic and interactive effect of different factors. Under optimized MAE condition, [i.e. 1 g of sample extracted through 70 mL of a solution (100% methanol pH 2.0), provided microwave power of 598 W for 2 min of irradiation time], the berberine and palmatine contents were recorded as 46.38 mg g^-1 and 20.54 mg g^-1 respectively. Under optimized condition, the yield of alkaloids were found closer to the models' predicted value. Similarly, total phenolic content and antioxidant activities were also found closer to the models' predicted value. To test the suitability of the optimized MAE condition for other species i.e., Berberis asiatica, extraction of alkaloids and polyphenolics was conducted and recorded higher yield to the previous records. Moreover, under optimum extraction condition, six and seven polyphenolic compounds from B. jaeschkeana and B. asiatica were quantified respectively. The proposed MAE optimization design using MCA contributes towards faster and greener extraction of alkaloids and polyphenolics with higher yield. Moreover these greener approaches could sustainably utilize species during extract preparation and harnessing its nutraceutical and pharmaceutical potential. This study design could also be replicated on other valuable species or compounds for effective extraction of nutraceutical components and sustainable utilization of natural products.