Recent advances in carbon quantum dot-based sensing of heavy metals in water

Advances on chalcogenide quantum dots-based sensors for environmental pollutants monitoring

Water contamination represents a significant ecological impact with global consequences, contributing to water scarcity worldwide. The presence of several pollutants, including heavy metals, pharmaceuticals, pesticides, and pathogens, in water resources underscores a pressing global concern, prompting the European Union (EU) to establish a Water Watch List to monitor the level of these substances. Nowadays, the standard methods used to detect and quantify these contaminants are mainly liquid or gas chromatography coupled with mass spectrometry (LC/GC-MS). While these methodologies offer precision and accuracy, they require expensive equipment and experienced technicians, and cannot be used on the field. In this context, chalcogenide quantum dots (QDs)-based sensors have emerged as promising, user-friendly, practical, and portable tools for environmental monitoring. QDs are semiconductor nanocrystals that possess excellent properties, and have demonstrated versatility across various sensor types, such as fluorescent, electrochemical, plasmonic, and colorimetric ones. This review summarizes recent advances (2019-2023) in the use of chalcogenide QDs for environmental sensing, highlighting the development of sensors capable of detect efficiently heavy metals, anions, pharmaceuticals, pesticides, endocrine disrupting compounds, organic dyes, toxic gases, nitroaromatics, and pathogens.

Selective and sensitive CQD-based sensing platform for Cu2+ detection in Wilson's disease

Excessive Cu2+ intake can cause neurological disorders (e.g. Wilson's disease) and adversely affect the gastrointestinal, liver, and kidney organs. The presence of Cu2+ is strongly linked to the emergence and progression of Wilson's disease (WD), and accurately measuring the amount of copper is a crucial step in diagnosing WD at an early stage in a clinical setting. In this work, CQDs were fabricated through a facile technique as a novel fluorescence-based sensing platform for detecting Cu(II) in aqueous solutions, and in the serum samples of healthy and affected individuals by WD. The CQDs interact with Cu(II) ions to produce Turn-on and Turn-off states at nano-molar and micro-molar levels, respectively, with LODs of 0.001 µM and 1 µM. In fact, the Cu2+ ions can act like a bridge between two CQDs by which the charge and electron transfer between the CQDs may increase, possibly can have significant effects on the spectroscopic features of the CQDs. To the best of our knowledge, this is the first reported research that can detect Cu(II) at low levels using two different complexation states, with promising results in testing serum. The potential of the sensor to detect Cu(II) was tested on serum samples from healthy and affected individuals by WD, and compared to results obtained by ICP-OES. Astonishingly, the results showed an excellent correlation between the measured Cu(II) levels using the proposed technique and ICP-OES, indicating the high potential of the fluorimetric CQD-based probe for Cu(II) detection. The accuracy, sensitivity, selectivity, high precision, accuracy, and applicability of the probe toward Cu(II) ions make it a potential diagnostic tool for Wilson's disease in a clinical setting.

The complexometric behavior of selected aroyl-S,N-ketene acetals shows that they are more than AIEgens

Using the established synthetic methods, aroyl-S,N-ketene acetals and subsequent bi- and multichromophores can be readily synthesized. Aside from pronounced AIE (aggregation induced emission) properties, these selected examples possess distinct complexometric behavior for various metals purely based on the underlying structural motifs. This affects the fluorescence properties of the materials which can be readily exploited for metal ion detection and for the formation of different metal-aroyl-S,N-ketene acetal complexes that were confirmed by Job plot analysis. In particular, gold(I), iron(III), and ruthenium (III) ions reveal complexation enhanced or quenched emission. For most dyes, weakly coodinating complexes were observed, only in case of a phenanthroline aroyl-S,N-ketene acetal multichromophore, measurements indicate the formation of a strongly coordinating complex. For this multichromophore, the complexation results in a loss of fluorescence intensity whereas for dimethylamino-aroyl-S,N-ketene acetals and bipyridine bichromophores, the observed quantum yield is nearly tripled upon complexation. Even if no stable complexes are formed, changes in absorption and emission properties allow for a simple ion detection.

A selective and sensitive probes of chalcone derivative as a fluorescent chemosensor for the detection of Cr3+ ion

A new chalcone based chemosensor like 6-cinnamoylthiochroman-4-one (AZAN), has been designed and synthesized from 6-chlorothiochroman-4-one and cinnamaldehyde via keto ethylenic linkage. Its amino derivatives were synthesized by using urea (AZANU), thiourea (AZANTU) and 2,6-diamino pyridine (AZANPy) respectively and its metal ion sensing properties were investigated. The sensors can selectively recognize and sense the metal cations by showing different fluorescent characteristics at different concentrations. The fluorescence intensity shows remarkable enhancement by Cr3+ over other common metal ions (Cd2+, Hg2+ and Pb2+). The proposed mechanism can be confirmed by UV-Vis and emission titration. The newly synthesized receptor can sense the metal ions even in nano molar level. The binding or association constant and detection limit of chemosensor to Cr3+ are 1.684 × 105 M-1 and 0.2245 × 10-9 M respectively. A computation using the density functional theory was done to gain detailed insights into the electronic structures of the ligand and its derivatives. B3LYP function and 6-31G(d,p) basis set were used to optimize the ground-state geometry of the chemical and its derivatives.

Recombinant Organophosphorus acid anhydrolase (OPAA) enzyme-carbon quantum dot (CQDs)-immobilized thin film biosensors for the specific detection of Ethyl Paraoxon and Methyl Parathion in water resources

Organophosphates pesticide (OP) toxicity through water resources is a large concern globally among all the emerging pollutants. Detection of OPs is a challenge which needs to be addressed considering the hazardous effects on the health of human beings. In the current research thin film biosensors of recombinant, Organophosphorus acid anhydrolase (OPAA) enzyme along with carbon quantum dots (CQDs) immobilized in thin films were developed. OPAA-CQDs thin film biosensors were used for the specific detection of two OPs Ethyl Paraoxon (EP) and Methyl Parathion (MP) in river water and household water supply. Recombinant OPAA enzyme was expressed in E. Coli, purified and immobilized on the CQD containing chitosan thin films. The CQDs used for this purpose were developed by a one-pot hydrothermal method from phthalic acid and Tri ethylene diamine. The properties of CQDs, OPAA and thin films were characterized using techniques like XPS, TEM, XRD, enzyme activity and CLSM measurements. Biosensing studies of EP and MP were performed by taking fluorescence measurements using a fiber optic spectrometer. The analytical parameters of biosensing were compared against an estimation carried out using the HPLC method. The biosensing performance indicates that the OPAA-CQDs thin film-based biosensors were able to detect both EP and MP in a range of 0-100 μM having a detection limit of 0.18 ppm/0.69 ppm for EP/MP, respectively with a response time of 5 min. The accuracy of estimation of EP/MP when spiked in water resources lie in the range of ∼100-102% which clearly indicates the OPAA-CQD based thin film biosensors can function as a point-of-use method for the detection of OP pesticides in complex water resources.

Valorization of food industrial waste: Green synthesis of carbon quantum dots and novel applications

Food analysis is a key element in monitoring food quality for risk assessment concerning public health. Instead of using chemically prepared carbon sources for food analysis, eco-friendly and green technology based CQDs are in great demand due to their least toxicity. Carbon quantum dots (CQDs) represent an innovative group of fluorescent nanomaterials, possessing characteristics like photoluminescence, minimal toxicity, high water solubility, and a strong affinity for biocompatibility. Their versatility extends to various applications in fields like sensor technology, biomedicine, and photocatalysis, among other areas. This paper reviews the current challenges related to the use of food by-products as a source of carbon not only enhances the value of waste but also facilitates food safety detection. The integration of CQDs into food technology for food safety analysis shows a great impact on the economy and environment. Furthermore, the details of synthesis, toxicity, application, and characterization of CQDs were also described along with a brief conceptual overview. Particularly, the detection of food additives, food-borne pathogens, heavy metal ions, and pesticide residues was also elaborated. Furthermore, the advantages and the drawbacks are also discussed, with an emphasis on their future prospects in this emerging research field. This review concluded that the use of food residual components has been associated with several toxic effects and accumulation of these residues leads to many disorders like cancer, neurological disorder, reproductive disease, cardiovascular and arthritis. Moreover, the carbon source produced from food waste interacted with other functional groups like oxygen, hydrogen, and nitrogen through π- π* and n- π* interactions. Overall, understanding the mechanism of fluorescence quenching of residual components is of great interest in the field of food detection, as it can provide insights into the design of cost-effective fluorescence probes with low toxicity.

Carbon Dots: From Synthesis to Unraveling the Fluorescence Mechanism

Carbon dots (CDs) being a new type of carbon-based nanomaterial have attracted intensive interest from researchers owing to their excellent biophysical properties. CDs are a class of fluorescent carbon nanomaterials that have emerged as a promising alternative to traditional quantum dots and organic dyes in applications including bioimaging, sensing, and optoelectronics. CDs possess unique optical properties, such as tunable emission, facile synthesis, and low toxicity, making them attractive for many applications in biology, medicine, and environmental areas. The synthesis of CDs is achievable by a variety of methods, including bottom-up and top-down approaches, involving the use of different carbon sources and surface functionalization strategies. However, understanding the fluorescence mechanism of CDs remains a challenge. Various mechanistic models have been proposed to explain their origin of luminescence. This review summarizes the recent developments in the synthesis and functionalization of CDs and provides an overview of the current understanding of the fluorescence mechanism.

Green tea waste-derived carbon dots: efficient degradation of RhB dye and selective sensing of Cu2+ ions

Herein, we have synthesized carbon dots (CDs) using a one-step hydrothermal method from green tea waste, a biomass-derived source with high fluorescent properties and excellent solubility in water. The synthesis of CDs was confirmed through a comprehensive range of characterization techniques, including HRTEM (high-resolution transmission electron microscopy), XPS (X-ray photoelectron spectroscopy), and EDX (energy-dispersive X-ray spectroscopy). The optical properties of the synthesized CDs were assessed using UV-Vis spectroscopy and fluorescence (FL) spectroscopy. The CDs displayed exceptional stability across a wide pH range and various concentrations. Moreover, these CDs exhibited a photoluminescence quantum yield (PLQY) of 21.6%, indicating their efficiency in emitting fluorescent light upon excitation. The CDs also showcased their prowess in fluorometrically detecting Cu2+ ions, displaying high sensitivity and selectivity. They presented two distinct linear ranges: 0.02 to 50 µM and 50 to 100 µM, with recovery rates ranging from 94.2 to 104.06%. Moreover, under visible light irradiation, the CDs exhibited significant efficiency in the photocatalytic removal of dyes. Specifically, the CDs achieved degradation rate of 97.89% for Rhodamine B (RhB) within a 30-min irradiation period. In the context of RhB adsorption, it is evident that the experimental data align more closely with the Freundlich isotherm than the Langmuir isotherm. This is substantiated by a higher R2 value (0.97) for the Freundlich isotherm model compared to the Langmuir adsorption isotherm model (0.93). Notably, the adsorption kinetics was effectively described by pseudo first-order kinetics models. Overall, these results highlight the promising potential of CDs in applications such as environmental remediation and waste treatment processes due to their photocatalytic and sensing capabilities.

One Pot Hydrothermal Synthesis and Application of Bright-yellow-emissive Carbon Quantum Dots in Hg2+ Detection

Carbon quantum dots (CQD) have drawn great interest worldwide for their extensive application as sensors due to their extraordinary physical and chemical characteristics, good biocompatibility, and high fluorescence in nature. Here, we demonstrate a technique for detecting mercury (Hg2+) ion using a fluorescent CQD probe. Ecology is concerned about the accumulation of heavy metal ions in water samples due to their harmful effects on human health. Sensitive identification and removal of metal ions from water samples are required to reduce heavy metals' risk. To find out Mercury in the water sample, carbon quantum dots were used and synthesized by 5-dimethyl amino methyl furfuryl alcohol and o-phenylene diamine through the hydrothermal technique. The synthesized CQD shows yellow emission when exposed to UV irradiation. Mercury ion was used to quench carbon quantum dots, and it was found that the detection limit was 5.2 nM with a linear range of 15-100 µM. The synthesized carbon quantum dots were demonstrated to efficiently detect Mercury ions in real water samples.

Assessment of biomass-derived carbon dots as highly sensitive and selective templates for the sensing of hazardous ions

Access to safe drinking water and a hygienic living environment are the basic necessities that encourage healthy living. However, the presence of various pollutants (especially toxic heavy metal ions) at high concentrations in water renders water unfit for drinking and domestic use. The presence of high concentrations of heavy-metal ions (e.g., Pb2+, Hg2+, Cr6+, Cd2+, or Cu2+) greater than their permissible limits adversely affects human health, and increases the risk of cancer of the kidneys, liver, skin, and central nervous system. Therefore, their detection in water is crucial. Due to the various benefits of "green"-synthesized carbon-dots (C-dots) over other materials, these materials are potential candidates for sensing of toxic heavy-metal ions in water sources. C-dots are very small carbon-based nanomaterials that show chemical stability, magnificent biocompatibility, excitation wavelength-dependent photoluminescence (PL), water solubility, simple preparation strategies, photoinduced electron transfer, and the opportunity for functionalization. A new family of C-dots called "carbon quantum dots" (CQDs) are fluorescent zero-dimensional carbon nanoparticles of size < 10 nm. The green synthesis of C-dots has numerous advantages over conventional chemical routes, such as utilization of inexpensive and non-poisonous materials, straightforward operations, rapid reactions, and renewable precursors. Natural sources, such as biomass and biomass wastes, are broadly accepted as green precursors for fabricating C-dots because these sources are economical, ecological, and readily/extensively accessible. Two main methods are available for C-dots production: top-down and bottom-up. Herein, this review article discusses the recent advancements in the green fabrication of C-dots: photostability; surface structure and functionalization; potential applications for the sensing of hazardous anions and toxic heavy-metal ions; binding of toxic ions with C-dots; probable mechanistic routes of PL-based sensing of toxic heavy-metal ions. The green production of C-dots and their promising applications in the sensing of hazardous ions discussed herein provides deep insights into the safety of human health and the environment. Nonetheless, this review article provides a resource for the conversion of low-value biomass and biomass waste into valuable materials (i.e., C-dots) for promising sensing applications.

Fluorescent fiber-optic device sensor based on carbon quantum dot (CQD) thin films for dye detection in water resources

Industrialization, especially in textile industries, has led to increased use of dyes and pigments to impart colours to fabrics. Textile dyes are one of the chief emerging pollutants of water resources as industrial effluents. In the current research, we report the development and utilization of pH-sensitive carbon quantum dots (CQDs) immobilized in polymer thin films acting as sensors for textile dye detection. The CQDs and CQD-containing polymer films were characterized by various techniques like XRD, TEM, XPS, and CLSM. The synthesized CQD thin films possess a unique pH-sensitive property that can be used to detect various model acidic and basic dyes that are important components of industrial effluents from textile dyes. The detection capability of the sensor films was evaluated by spiking dyes in various water matrices, like household tap water and river water. The results indicate that pH-sensitive CQD thin film was able to detect three acidic dyes, namely methyl red, methyl orange, and bromocresol green, and one basic dye, methylene blue, in a linear range of 0-100 μM with a response time of 1 minute. The CQD thin-film sensors have a limit of detection of 26.4 ppb, 214.5 ppb, 46.2 ppb, and 29.7 ppb for methyl red, methyl orange, bromocresol green and methylene blue, respectively. The accuracy of detection performed by spiking studies in water resources indicated an ∼100% recovery value in all tested acidic and basic dyes. The sensor films were compared for analytical parameters using UV-visible-fluorescence spectroscopy and HPLC.

Controllable preparation of long wavelength carbon dots and their application in fluorescence detection

By adjusting the reactants and reaction conditions, the particle size and surface state of fluorescent carbon dots (CDs) can be controlled, and CDs with different photoluminescence colors can be finally prepared. However, this multi-step procedure is relatively time-consuming and complex. Therefore, it is of great significance to explore a more convenient and efficient preparation route. In this paper, SA (P-aminobenzenesulfonic acid) and οPD (o-phenylenediamine) were used as precursors, and water and ethanol were used as reaction solvents. By adjusting the proportion of the precursor or reaction solvent, self-doping and co-doping of the precursor were realized, and CDs with various fluorescent colors were finally prepared. It was found that red-emission CDs (r-CDs) could be prepared with SA and οPD as precursors and water as the solvent. Through comparative study, it was found that r-CDs were affected by H+ in the formation process and photoluminescence process. The fluorescence stability of r-CDs indicated that they have good selectivity for some metal ions. The r-CDs prepared in this paper realized the specific recognition of Cu2+ and Ag+ through the "off-on" process, and the detection limits were 0.165 μm and 1.53 μm, respectively. And this test has the potential for practical qualitative testing.

Two-dimensional bismuth oxyselenide quantum dots as nanosensors for selective metal ion detection over a wide dynamic range: sensing mechanism and selectivity

Bismuth oxyselenide (Bi2O2Se) nanosheets, a new 2D non-van der Waals nanomaterial having unique semiconducting properties, could be favorable for various sensing applications. In the present report, a top-down chemical approach was adopted to synthesize ultrathin Bi2O2Se quantum dots (QDs) in an appropriate solution. The as-prepared 2D Bi2O2Se QDs with an average size of ∼3 nm, exhibiting strong visible fluorescence, were utilized for heavy-metal ion detection with high selectivity. The QDs show a high optical band gap and a reasonably high fluorescence quantum yield (∼4%) in the green region without any functionalization. A series of heavy metal ions were detected using these QDs. The as-prepared QDs exhibit selective detection of Fe3+ over a wide dynamic range with a high quenching ratio and a low detection limit (<0.5 μM). The mechanism of visible fluorescence and Fe3+ ion-induced quenching was investigated in detail based on a model involving adsorption and charge transfer. Density functional theory (DFT) first principles calculations show that fluorescence quenching occurred selectively due to the efficient trapping of electrons in the bandgap states created by the Fe atoms. This work presents a sustainable and scalable method to synthesize 2D Bi2O2Se QDs for heavy metal ion sensing over a wide dynamic range and these 2D QDs could find potential uses in gas sensors, biosensors and optoelectronics.

Plasmon-enhanced fluorescence for ellagic acid detection based on surface structure of gold nanoparticles

Ellagic acid (EA), as a natural polyphenolic acid, is considered a naturally occurring inhibitor of carcinogenesis. Herein, we developed a plasmon-enhanced fluorescence (PEF) probe for EA detection based on silica-coated gold nanoparticles (Au NPs). A silica shell was designed to control the distance between silica quantum dots (Si QDs) and Au NPs. The experimental results indicated that an 8.8-fold fluorescence enhancement was obtained compared with the original Si QDs. Three-dimensional finite-difference time-domain (3D-FDTD) simulations further demonstrated that the local electric field enhancement around Au NPs led to the fluorescence enhancement. In addition, the fluorescent sensor was applied for the sensitive detection of EA with a detection limit of 0.14 μM. It can be used to detect EA in pomegranate rind with a recovery rate of 100.26-107.93%. It can also be applied to the analysis of other substances by changing the identification substances. These experimental results indicated that the probe provides a good option for clinical analysis and food safety.

Simple fabrication of carbon quantum dots and activated carbon from waste wolfberry stems for detection and adsorption of copper ion

Removal of heavy metal pollution is an endless topic, because heavy metals can cause irreversible damage to the human body and environment. It is urgent to develop novel materials for detection and adsorption of heavy metal ions. In this paper, waste wolfberry straw was utilized as a carbon source, and two simple methods were developed to successfully prepare activated carbon (AC) and carbon quantum dots (CQDs). The fabrication conditions were optimized by adjusting the mass ratio of precursor to activator, type of activator and activation times. When sodium hydroxide (NaOH) was selected as an activator (6 : 1, mass ratio of NaOH to AC-precursor), and the activation was performed at 600 °C for 1 h, the highest specific surface area of the obtained AC-NaOH-3 reached 3016 m² g^-1. The adsorption capacity for copper ions (Cu²⁺) reached 68.06 mg g^-1. The preparation conditions for CQDs were also optimized by adjusting the concentration of wolfberry stem, reaction time and temperature. When the wolfberry stem concentration was 7.5 g L^-1, and the activation was performed at 200 °C for 24 h, the obtained CQDs exhibited strong fluorescence emission in the blank and 12 kinds of metal ion solutions, respectively, however, the fluorescence intensity was remarkably decreased after adding Cu²⁺. In the range of 10-80 nM, the linear correlation coefficient between the concentration of Cu²⁺ and fluorescence intensity of CQDs was 0.992, and the limit of detection was 2.83 nmol L^-1. Thus, these two kinds of materials were prepared from wolfberry stem, which opened up a new way for the application in adsorption and detection of copper ions.

An Exploratory in N-Doped Carbon Dots as Green Fluorescence Probes for Hg(II) Ions Detection

AbstractCarbon dots (CDs), as a fascinating carbon nanomaterial, have important applications in various fields due to their unique properties. The physical and chemical properties of CDs can be fine-tuned using heteroatom doping and surface functionalization. Here, we synthesized N-doped carbon dots (N-CDs) by reacting Citric acid, which serve as the carbon core, with twenty amino acids under microwave irradiation. The fluorescence quenching of each amino acid doped CDs by Hg(II) ions were experimentally measured. Then the effect of the molecular features and chemical properties of amino acids on the fluorescence quenching of N-CDs by Hg(II) ions was investigated by using the quantitative structure-property relationship (QSPR) method. Applying different machine learning techniques including correlation-based and ReliefF algorithm feature selection approaches to choose relevant descriptors, multi linear regression and support vector machine to construct QSPR model, some reliable and predictive models were developed. Based on the variables used throughout the final QSPR models, hydrophobic interactions, in addition to hydrogen bonding interactions, can be considered a major factor governing the photoluminescence behavior of different N-CDs quenched by Hg(II) ions. N-CDs derived from amino acids bearing larger hydrophobic surfaces show greater fluorescence quenching, indicating that a greater capacity to interact with Hg(II) metal ions resulting in further fluorescence quenching.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

Cyan Fluorescent Carbon Quantum Dots with Amino Derivatives for the Visual Detection of Copper (II) Cations in Sea Water

Amino- and carboxyl-functionalized carbon quantum dots (Amino-CQDs) were synthesized through fast and simple microwave treatment of a citric acid, ethylenediamine and ethylenediaminetetraacetic acid (EDTA) mix. The reproducible and stable optical properties from newly synthesized CQD dispersion with a maximum absorbance spectra at 330 nm and the symmetric emission maximum at 470 nm made the Amino-CQDs a promising fluorescence material for analytical applications. The highly aminated and chelate moieties on the CQDs was appropriate for a copper (Cu²⁺) cation sensor in the linear range from 1 × 10^-4 mg/mL to 10 mg/mL with a limit of detection at 0.00036 mg/mL by static fluorescence quenching effects. Furthermore, Amino-CQDs demonstrated stable fluorescence parameters for assays in diluted alkali metal solution (Na⁺ and K⁺) and sea water. Finally, a visual sensor, based on Amino-CQDs, was successfully created for the 0.01-100 mg/mL range to produce a colorimetric effect that can be registered by computer vision software (Open CV Python).

Reversible detection of Hg(II) in pure water based on thymine modified nitrogen, sulfur co-doped carbon dots combined with antidote

Conventional Hg²⁺ visual sensors are unsustainable, hindering their practical application for improved water quality and health. In order to address this challenge, herein, N, S co-doped carbon nanodots (NS-CDs) were prepared and well characterized, presented the fluorescent monitoring for Hg²⁺ over other metal ions with the limit of detection (LOD) of 0.47 µM. Next, the CDs were successfully modified by thymine without any fluorescence labelling (referred to as T-NS-CDs). The sensitivity to Hg²⁺ cloud be noticeable enhanced due to the formation of T-Hg²⁺-T specific base pairs. Accordingly, the LOD was calculated with values as low as 1.56 nM. Furthermore, Hg²⁺ could be released and complexed with antidote (meso-2,3-dimercaptosuccinic acid) (DMSA-Hg²⁺), being the responsible for the reversible interconversion between T-Hg²⁺-T and DMSA-Hg²⁺. Interestingly, the proposed sensing system also applies to the fluorescent sensing for Hg²⁺ in tap water with satisfactory recoveries (96.97 %-101.38 %, RSD < 2 %). Thus, by simply combination of elemental doping and surface functionalization, the surface state and functionalities of CDs could be tailorable, endowing the fluorometric sensing towards Hg²⁺ in environmental system.

Review on Fluorescent Carbon/Graphene Quantum Dots: Promising Material for Energy Storage and Next-Generation Light-Emitting Diodes

Carbon/graphene quantum dots are 0D fluorescent carbon materials with sizes ranging from 2 nm to around 50 nm, with some attractive properties and diverse applications. Different synthesis routes, bandgap variation, higher stability, low toxicity with tunable emission, and the variation of physical and chemical properties with change in size have drawn immense attention to its potential application in different optoelectronics-based materials, especially advanced light-emitting diodes and energy storage devices. WLEDs are a strong candidate for the future of solid-state lighting due to their higher luminance and luminous efficiency. High-performance batteries play an important part in terms of energy saving and storage. In this review article, the authors provide a comparative analysis of recent and ongoing advances in synthesis (top-down and bottom-up), properties, and wide applications in different kinds of next-generation light-emitting diodes such as WLEDs, and energy storage devices such as batteries (Li-B, Na-B) and supercapacitors. Furthermore, they discuss the potential applications and progress of carbon dots in battery applications such as electrode materials. The authors also summarise the developmental stages and challenges in the existing field, the state-of-the-art of carbon/graphene quantum dots, and the potential and possible solutions for the same.

Carbon dot-functionalized macroporous adsorption resin for bifunctional ultra-sensitive detection and fast removal of iron(III) ions

Heavy metal pollution has spread around the world with the development of industry, posing a major threat to human health. It is urgent to design and fabricate bifunctional materials for detection and adsorption of heavy metal ions. Herein, poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres, a kind of common macroporous adsorption resin (MAR), were employed as the matrix, and carbon dots (CDs) with excellent optical properties were grafted onto the surface of MAR by surface-initiated atom transfer radical polymerization (SI-ATRP) and photo-initiated "thiol-yne" click chemistry. The synthesized MAR@poly(PA)@CD could produce fluorescence quenching with Fe³⁺. A simple fluorescence spectrometric method for detection of Fe³⁺ was established. The fluorescence intensity of MAR@poly(PA)@CD decreased linearly with the concentration of Fe³⁺ in the range of 0-70 nmol L^-1, with a limit of detection (LOD) of 6.6 nmol L^-1, which had the potential for trace detection. In addition, after SI-ATRP modification, many adsorption sites were generated on the surface of MAR, and the adsorption capacity for Fe³⁺ was 23.8 mg g^-1. Isothermal and kinetic adsorption experiments were more consistent with the Langmuir model (r = 0.9992) and pseudo-second-order model (r = 0.9902), indicating that the adsorption was monolayer adsorption and chemical adsorption, respectively. MAR@poly(PA)@CD with dual functions of detecting and adsorbing Fe³⁺ was successfully prepared, showing great application prospects in the environmental field.

State-of-the-art developments in carbon quantum dots (CQDs): Photo-catalysis, bio-imaging, and bio-sensing applications

Carbon quantum dots (CQDs), the intensifying nanostructured form of carbon material, have exhibited incredible impetus in several research fields such as bio-imaging, bio-sensing, drug delivery systems, optoelectronics, photovoltaics, and photocatalysis, thanks to their exceptional properties. The CQDs show extensive photonic and electronic properties, as well as their light-collecting, tunable photoluminescence, remarkable up-converted photoluminescence, and photo-induced transfer of electrons were widely studied. These properties have great advantages in a variety of visible-light-induced catalytic applications for the purpose of fully utilizing the energy from the solar spectrum. The major purpose of this review is to validate current improvements in the fabrication of CQDs, characteristics, and visible-light-induced catalytic applications, with a focus on CQDs multiple functions in photo-redox processes. We also examine the problems and future directions of CQD-based nanostructured materials in this growing research field, with an eye toward establishing a decisive role for CQDs in photocatalysis, bio-imaging, and bio-sensing applications that are enormously effective and stable over time. In the end, a look forward to future developments is presented, with a view to overcoming challenges and encouraging further research into this promising field.

Natural and Engineered Nanomaterials for the Identification of Heavy Metal Ions—A Review

In recent years, there has been much interest in developing advanced and innovative approaches for sensing applications in various fields, including agriculture and environmental remediation. The development of novel sensors for detecting heavy metals using nanomaterials has emerged as a rapidly developing research area due to its high availability and sustainability. This review emphasized the naturally derived and engineered nanomaterials that have the potential to be applied as sensing reagents to interact with metal ions or as reducing and stabilizing agents to synthesize metallic nanoparticles for the detection of heavy metal ions. This review also focused on the recent advancement of nanotechnology-based detection methods using naturally derived and engineered materials, with a summary of their sensitivity and selectivity towards heavy metals. This review paper covers the pros and cons of sensing applications with recent research published from 2015 to 2022.

Recent Advances in the Recognition Elements of Sensors to Detect Pyrethroids in Food: A Review

The presence of pyrethroids in food and the environment due to their excessive use and extensive application in the agriculture industry represents a significant threat to public health. Therefore, the determination of the presence of pyrethroids in foods by simple, rapid, and sensitive methods is warranted. Herein, recognition methods for pyrethroids based on electrochemical and optical biosensors from the last five years are reviewed, including surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), chemiluminescence, biochemical, fluorescence, and colorimetric methods. In addition, recognition elements used for pyrethroid detection, including enzymes, antigens/antibodies, aptamers, and molecular-imprinted polymers, are classified and discussed based on the bioreceptor types. The current research status, the advantages and disadvantages of existing methods, and future development trends are discussed. The research progress of rapid pyrethroid detection in our laboratory is also presented.

Sensor Heavy Metal from Natural Resources for a Green Environment: A Review Relation Between Synthesis Method and Luminescence Properties of Carbon Dots

Carbon dots are 10-nm nanomaterial classes as excellent candidates in various applications: physics, biology, chemistry, and food science due to high stable biocompatibility and high surface expansive. Carbon dots (CDs) produced from natural materials have received wide attention due to their unique benefits, easy availabilities, sufficient costs, and harmless to the ecosystem. The various properties of CDs can be obtained from various synthesis methods: hydrothermal, microwave-assisted, and pyrolysis. The CDs have shown enormous potential in metal particle detection, colorimetric sensors, electrochemical sensors, and pesticide sensor. This review provides systematic information on a synthesis method based on natural resources and the application to the environmental sensors for supporting the clean environment. We hopefully this review, useful as a reference source in providing the guidance or roadmap of new researchers to develop new strategy in increasing luminescence properties CDs for multi detection of heavy metal in the environment.

Tuning the Sensing Properties of N and S Co-Doped Carbon Dots for Colorimetric Detection of Copper and Cobalt in Water

In this study, nitrogen and sulfur co-doped carbon dots (NS-CDs) were investigated for the detection of heavy metals in water through absorption-based colorimetric response. NS-CDs were synthesized by a simple one-pot hydrothermal method and characterized by TEM, STEM-coupled with energy dispersive X-ray analysis, NMR, and IR spectroscopy. Addition of Cu(II) ions to NS-CD aqueous solutions gave origin to a distinct absorption band at 660 nm which was attributed to the formation of cuprammonium complexes through coordination with amino functional groups of NS-CDs. Absorbance increased linearly with Cu(II) concentration in the range 1–100 µM and enabled a limit of detection of 200 nM. No response was observed with the other tested metals, including Fe(III) which, however, appreciably decreased sensitivity to copper. Increase of pH of the NS-CD solution up to 9.5 greatly reduced this interference effect and enhanced the response to Cu(II), thus confirming the different nature of the two interactions. In addition, a concurrent response to Co(II) appeared in a different spectral region, thus suggesting the possibility of dual-species multiple sensitivity. The present method neither requires any other reagents nor any previous assay treatment and thus can be a promising candidate for low-cost monitoring of copper onsite and by unskilled personnel.

Dual Fluorometric Detection of Fe3+ and Hg2+ Ions in an Aqueous Medium Using Carbon Quantum Dots as a "Turn-off" Fluorescence Sensor

The present study aimed to develop a carbon dots-based fluorescence (FL) sensor that can detect more than one pollutant simultaneously in the same aqueous solution. The carbon dots-based FL sensor has been prepared by employing a facile hydrothermal method using citric acid and ethylenediamine as precursors. The as-synthesized CDs displayed excellent hydrophilicity, good photostability and blue fluorescence under UV light. They have been used as an efficient "turn-off" FL sensor for dual sensing of Fe³⁺ and Hg²⁺ ions in an aqueous medium with high sensitivity and selectivity through a static quenching mechanism. The lowest limit of detection (LOD) for Fe³⁺ and Hg²⁺ ions was found to be 0.406 µM and 0.934 µM, respectively over the concentration range of 0-50 µM. Therefore, the present work provides an effective strategy to monitor the concentration of Fe³⁺ and Hg²⁺ ions simultaneously in an aqueous medium using environment-friendly CDs.

One-Step Green Synthesis of Water-Soluble Fluorescent Carbon Dots and Its Application in the Detection of Cu2

Renewable biowaste-derived carbon dots have garnered immense interest owing to their exceptional optical, fluorescence, chemical, and environmentally friendly attributes, which have been exploited for the detection of metals, non-metals, and organics in the environment. In the present study, water-soluble fluorescent carbon dots (CDs) were synthesized via facile green microwave pyrolysis of pine-cone biomass as precursors, without any chemical additives. The synthesized fluorescent pine-cone carbon dots (PC-CDs) were spherical in shape with a bimodal particle-size distribution (average diameters of 15.2 nm and 42.1 nm) and a broad absorption band of between 280 and 350 nm, attributed to a π-π* and n-π* transition. The synthesized PC-CDs exhibited the highest fluorescent (FL) intensity at an excitation wavelength of 360 nm, with maximum emission of 430 nm. The synthesized PC-CDs were an excellent fluorescent probe for the selective detection of Cu²⁺ in aqueous solution, amidst the presence of other metal ions. The FL intensity of PC-CDs was exceptionally quenched in the presence of Cu²⁺ ions, with a low detection limit of 0.005 μg/mL; this was largely ascribed to Cu²⁺ ion binding interactions with the enriched surface functional groups on the PC-CDs. As-synthesized PC-CDs are an excellent, cost effective, and sensitive probe for detecting and monitoring Cu²⁺ metal ions in wastewater.

Carbon Quantum Dots’ Synthesis with a Strong Chemical Claw for Five Transition Metal Sensing in the Irving–Williams Series

Carbon quantum dots (CQDs) are an excellent eco-friendly fluorescence material, ideal for various ecological testing systems. Herein, we establish uniform microwave synthesis of the group of carbon quantum dots with specific functionalization of ethylenediamine, diethylenetriamine, and three types of Trilon (A, B and C) with chelate claws -C-NH3. CQDs’ properties were studied and applied in order to sense metal cations in an aquatic environment. The results provide the determination of the fluorescence quench in dots by pollutant salts, which dissociate into double-charged ions. In particular, the chemical interactions with CQDs’ surface in the Irving–Williams series (IWs) via functionalization of the negatively charged surface were ascribed. CQD-En and CQD-Dien demonstrated linear fluorescence quenching in high metal cation concentrations. Further, the formation of claws from Trilon A, Trilon B, and C effectively caught the copper and nickel cations from the solution due to the complexation on CQDs’ surface. Moreover, CQD-Trilon C presented chelating properties of the surface and detected five cations (Cu2+, Ni2+, Ca2+, Mg2+, Zn2+) from 0.5 mg/mL to 1 × 10−7 mg/mL in the Irving–William’s series. Dependence was mathematically attributed as an equation (ML regression model) based on the constant of complex formation. The reliability of the data was 0.993 for the training database.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

Monitoring the Viral Transmission of SARS-CoV-2 in Still Waterbodies Using a Lanthanide-Doped Carbon Nanoparticle-Based Sensor Array

The latest epidemic of extremely infectious coronavirus disease 2019 (COVID-19) has created a significant public health concern. Despite substantial efforts to contain severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within a specific location, shortcomings in the surveillance of predominantly asymptomatic infections constrain attempts to identify the epidemiological spread of the virus. Continuous surveillance of wastewater streams, including sewage, offers opportunities to track the spread of SARS-CoV-2, which is believed to be found in fecal waste. To demonstrate the feasibility of SARS-CoV-2 detection in wastewater systems, we herein present a novel facilely constructed fluorescence sensing array based on a panel of three different lanthanide-doped carbon nanoparticles (LnCNPs). The differential fluorescence response pattern due to the counterion-ligand interactions allowed us to employ powerful pattern recognition to effectively detect SARS-CoV-2 and differentiate it from other viruses or bacteria. The sensor results were benchmarked to the gold standard RT-qPCR, and the sensor showed excellent sensitivity (1.5 copies/μL) and a short sample-to-results time of 15 min. This differential response of the sensor array was also explained from the differential mode of binding of the LnCNPs with the surface proteins of the studied bacteria and viruses. Therefore, the developed sensor array provides a cost-effective, community diagnostic tool that could be potentially used as a novel epidemiologic surveillance approach to mitigate the spread of COVID-19.

Application of carbon dots and their composite materials for the detection and removal of radioactive ions: A review

Radioactive ions with high-heat release or long half-life could cause long-term influence on environment and they might enter the food chain to damage human body for their toxicity and radioactivity. It is of great importance to develop methods and materials to detect and remove radioactive ions. Carbon dots and their composite materials has been applied widely in many fields due to their plentiful raw materials, facile synthesis and functional process, unique optical property and abundant functional groups. This comprehensive review focuses on the preparation of CDs and composite materials for the detection and adsorption of radioactive ions. Firstly, the recent-developed synthetic methods for CDs were summarized briefly, including hydrothermal/solvothermal, microwave, electrochemistry, microplasma, chemical oxidation methods, focusing on the influence of CDs properties. Secondly, the synthetic methods for CDs composite materials were classified to four categories and summarized generally. Thirdly, the application of CDs for radioactive ions detection and adsorption were explored and concluded including uranium, iodine, europium, strontium, samarium et al. Finally, the detection and adsorption mechanism for radioactive ions were searched and the perspective and outlook of CDs for detection and adsorption radioactive ions have been proposed based on our understanding.

Colorimetric Detection of Chromium(VI) Ions in Water Using Unfolded-Fullerene Carbon Nanoparticles

Water pollution caused by hexavalent chromium (Cr(VI)) ions represents a serious hazard for human health due to the high systemic toxicity and carcinogenic nature of this metal species. The optical sensing of Cr(VI) through specifically engineered nanomaterials has recently emerged as a versatile strategy for the application to easy-to-use and cheap monitoring devices. In this study, a one-pot oxidative method was developed for the cage opening of C60 fullerene and the synthesis of stable suspensions of N-doped carbon dots in water-THF solutions (N-CDs-W-THF). The N-CDs-W-THF selectively showed variations of optical absorbance in the presence of Cr(VI) ions in water through the arising of a distinct absorption band peaking at 550 nm, i.e., in the transparency region of pristine material. Absorbance increased linearly, with the ion concentration in the range 1-100 µM, thus enabling visual and ratiometric determination with a limit of detection (LOD) of 300 nM. Selectivity and possible interference effects were tested over the 11 other most common heavy metal ions. The sensing process occurred without the need for any other reactant or treatment at neutral pH and within 1 min after the addition of chromium ions, both in deionized and in real water samples.

Development of QDs-based nanosensors for heavy metal detection: A review on transducer principles and in-situ detection

Heavy metal pollution has severe threats to the ecological environment and human health. Thus, it is urgent to achieve the rapid, selective, sensitive and portable detection of heavy metal ions. To overcome the defects of traditional methods such as time-consuming, low sensitivity, high cost and complicated operation, QDs (Quantum dots)-based nanomaterials have been used in sensors to significantly improve the sensing performance. Due to their excellent physicochemical properties, high specific surface area, high adsorption and reactive capacity, nanomaterials could act as potential probes or offer enhanced sensitivity and create a promising nanosensors platform. In this review, the rapidly advancing types of QDs for heavy metal ions detection are first summarized. Modified with ligands, nanomaterials, or biomaterials, QDs are assembled on sensors by the interaction of electrostatic adsorption, chemical bonding, steric hindrance, and base-pairing. The stability of QDs-based nanosensors is improved by doping the elements to QDs, providing the reference substance, optimizing the assemble strategies and so on. Then, according to transducer principles, the two most typical sensor categories based on QDs: optical and electrochemical sensors are highlighted to be discussed. In the meanwhile, portable devices combining with QDs to adapt the practical detection in complex situations are summarized. The deficiencies and future challenges of QDs in toxicity, specificity, portability, multi-metal co-detection and degradation during the detection are also pointed out. In the end, the development trends of QDs-based nanosensors for heavy metal ions detection are discussed. This review presents an overall understanding, recent advances, current challenges and future outlook of QDs-based nanosensors for heavy metal detection.

Synthesis of highly fluorescent and water soluble graphene quantum dots for detection of heavy metal ions in aqueous media

Fluorescent graphene quantum dots (GQDs) are nanomaterials which possess unique properties that show great potential in different applications. In this work, GQDs were synthesized using graphene oxide (GO) as precursor via thermal treatment at high temperature. The obtained GQDs were highly fluorescent and were suitable for the determination of heavy metal ions. X-ray diffraction, FTIR spectroscopy, and UV visible spectroscopy confirm the formation of GQDs. TEM images show that formed GQDs have size ranging from 2 to 10 nm. Emission profile of aqueous GQDs was taken by exciting GQDs at different wavelength. The intensity of GQDs remains the same for 4-5 months. Furthermore, as prepared, GQDs were used for selective recognition of Fe³⁺, Pb⁺², and Cr³⁺ from the bunch of different metal ions in aqueous media. Lower limit of detection obtained for Fe³⁺, Cr³⁺ and Pb²⁺ using GQDs were 50, 100 and 100 nM, respectively, which indicates that the GQDs can be utilized as a promising material for sensing of the heavy metal ions. Graphical abstract.