Oxidation of Microcystis aeruginosa and Anabaena flos-aquae by ozone: impacts on cell integrity and chlorination by-product formation

Advances and challenges in the technologies for cyanobacterial cells removal in drinking water treatment

Harmful cyanobacteria in reservoirs pose a serious threat to drinking water safety due to the intracellular metabolites, such as toxins and unpleasant tastes & odours. Effective removal of harmful cyanobacteria with little to no cell damage is very important to ensure the safety of drinking water. This review first introduced development history of cyanobacterial removal technologies in drinking water treatment. Then, impacts of oxidation, coagulation and pre-oxidation enhanced coagulation processes on cyanobacterial removal and integrity of the cells were comprehensively evaluated and discussed. Oxidation can remove cyanobacteria, but high doses of oxidants can result in significant cell lysis and release of intracellular metabolites, especially when using chlorine or ozone. Although there is practically no cell damage during coagulation, the removal efficiency is low in many cases. Pre-oxidation may improve cyanobacterial removal by the subsequent solid-liquid separation processes, and moderate pre-oxidation with little to no cell lysis is very important. Mechanisms of interface interaction between pre-oxidants and cyanobacteria should be defined in future to ensure moderate pre-oxidation of algal cells. Fate of cyanobacterial cells in sludge is also reviewed because more and more waterworks return sludge supernatant to the inlet of plant. Damage to cyanobacterial cells in sludge depends mainly upon coagulant type and dosage, algal species, and cyanobacteria-containing sludge should be treated before cell lysis. Efficient techniques for harmless disposal of cyanobacteria-containing sludge should be developed in future. This paper will help to better understand the cyanobacterial removal processes and provide improved perspectives for future research in this field.

Effect of surfactant's charge properties on behavior, physiology, and biochemistry and the release of microcystins of Microcystis aeruginosa

Surfactant pollution is escalatitheng in eutrophic waters, but the effect of surfactant charge properties on the physiological and biochemical properties of toxin-producing microalgae remains inadequately explored. To address this gap, this study explores the effects and mechanisms of three common surfactants-cetyltrimethylammonium bromide (CTAB, cationic), sodium dodecyl sulfate (SDS, anionic), and Triton X-100 (nonionic)-found in surface waters, on the agglomeration behavior, physiological indicators, and Microcystin-LR (MC-LR) release of Microcystis aeruginosa (M. aeruginosa) by using UV-visible spectroscope, Malvern Zetasizer, fluorescence spectrometer, etc. Results suggest that charge properties significantly affect cyanobacterial aggregation and cellular metabolism. The CTAB-treated group demonstrates a ∼5.74 and ∼9.74 times higher aggregation effect compared to Triton X-100 and SDS (300 mg/L for 180 min) due to strong electrostatic attraction. Triton X-100 outperforms CTAB and SDS in polysaccharide extraction, attributed to its higher water solubility and lower critical micelle concentration. CTAB stimulates cyanobacteria to secrete proteins, xanthohumic acid, and humic acids to maintain normal physiological cells. Additionally, the results of SEM and ion content showed that CTAB damages the cell membrane, resulting in a ∼90% increase in the release of intracellular MC-LR without cell disintegration. Ionic analyses confirm that all three surfactants alter cell membrane permeability and disrupt ionic metabolic pathways in microalgae. This study highlights the relationship between the surface charge properties of typical surfactants and the dispersion/agglomeration behavior of cyanobacteria. It provides insights into the impact mechanism of exogenous surfactants on toxic algae production in eutrophic water bodies, offering theoretical references for managing surfactant pollution and treating algae blooms.

Degradation performance and mechanism of microcystins in aquaculture water using low-temperature plasma technology

The eutrophication of aquaculture water bodies seriously restricts the healthy development of the aquaculture industry. Among them, microcystins are particularly harmful. Therefore, the development of technologies for degrading microcystins is of great significance for maintaining the healthy development of the aquaculture industry. The feasibility and mechanism of removing microcystins-LR by dielectric barrier discharge (DBD) plasma were studied. DBD discharge power of 49.6 W and a treatment time of 40 min were selected as the more suitable DBD parameters, resulting in microcystin-LR removal efficiency of 90.4%. Meanwhile, the effects of initial microcystin-LR concentration, initial pH value, turbidity, anions on the degradation effect of microcystin-LR were investigated. The removal efficiency of microcystin-LR decreased with the increase of initial microcystin-LR concentration and turbidity. The degradation efficiency of microcystin-LR at pH 4.5 and 6.5 is significantly higher than that at pH 8.5 and 3.5. HCO3- can inhibit the removal efficiency of microcystin-LR. Furthermore, five intermediates products (m/z = 1029.5, 835.3, 829.3, 815.4, 642.1) were identified in this study, and the toxicity analysis of these degradation intermediates indicated that DBD treatment can reduce the toxicity of microcystin-LR. e－aq, •OH, H2O2, and O3 have been shown to play a major role in the degradation of microcystin-LR, and the contribution ranking of these active species is e－aq > •OH > H2O2 > O3. The application of DBD plasma technology in microcystin-LR removal and detoxification has certain development potential.

Progress on control of harmful algae by sustained-release technology of allelochemical: A review

The outbreak of harmful algae blooms caused by water eutrophication seriously jeopardizes the aquatic ecological environment and human health. Therefore, algae control technology has attracted widespread attention between environmental scholars. Allelochemical sustained-release technology which releases the active ingredient to the target medium at a certain rate within the effective time, so that the system maintains a certain concentration, thus prolonging its influence on the target organism. Allelochemical sustained-release technology has become the focus of research due to the characteristics of high efficiency, safety, low-cost, environment friendly and no secondary pollution. This paper reviews the characteristics of allelochemical substances and the status quo of plant extraction, explains the detailed classification of allelochemical sustained-release microspheres (ASRMs) and the application of algae inhibition, summarizes the preparation method of ASRMs, elaborates on the mechanism of algae inhibition of sustained-release technology from the perspective of photosynthesis, cellular enzyme activity, algae cell structure, gene expression, and target site action. Focuses on the summary of the factors influencing the effect of algae inhibition of ASRMs, including particle size of sustained-release microspheres, selection of carrier materials, and the growth stage of algae. The future direction and prospect of algae inhibition by allelochemical sustained-release technology were prospected to provide the scientific basis for water ecological restoration.

Feasibility and mechanism of removing Microcystis aeruginosa and degrading microcystin-LR by dielectric barrier discharge plasma

Harmful cyanobacterial bloom is one of the serious environmental problems worldwide. Microcystis aeruginosa is a representative harmful alga in cyanobacteria bloom. It is of great significance to develop new technologies for the removal of Microcystis aeruginosa and microcystins. The feasibility and mechanism of removing microcystis aeruginosa and degrading microcystins by dielectric barrier discharge (DBD) plasma were studied. The suitable DBD parameters obtained in this study are DBD (41.5 W, 40 min) and DBD (41.5 W, 50 min), resulting in algae removal efficiency of 77.4% and 80.4%, respectively; scanning electron microscope and LIVE-DEATH analysis demonstrate that DBD treatment can disrupt cell structure and lead to cell death; analysis of elemental composition and chemical state indicated that there are traces of oxidation of organic nitrogen and organic carbon in microcystis aeruginosa; further intracellular ROS concentration and antioxidant enzyme activity analysis confirm that DBD damage microcystis aeruginosa through oxidation. Meanwhile, DBD can effectively degrade the microcystin-LR released after cell lysis, the extracellular microcystin-LR concentration in the DBD (41.5 W) group decreased by 88.7% at 60 min compared to the highest concentration at 20 min; further toxicity analysis of degradation intermediates indicated that DBD can reduce the toxicity of microcystin-LR. The contribution of active substances to the inactivation of microcystis aeruginosa is eaq- > •OH > H2O2 > O3 > 1O2 > •O2- > ONOO-, while on the degradation of microcystin-LR is eaq- > •OH > H2O2 > O3 > •O2- > 1O2 > ONOO-. The application of DBD plasma technology in microcystis aeruginosa algae removal and detoxification has certain prospects for promotion and application.

Cyanobacteria and cyanotoxins in the environment and water intakes: Reports, diversity of congeners, detection by mass spectrometry and their impact on health

Cyanobacteria are aquatic microorganisms of high interest for research due to the production of secondary metabolites, among which the most popular are cyanotoxins, responsible for causing severe poisoning in humans and animals through ingestion or contact with contaminated water bodies. Monitoring the number of cyanobacteria in water and concentrations of secreted cyanotoxins with the aid of sensitive and reliable methods is considered the primary action for evaluating potentially toxic blooms. There is a great diversity of methods to detect and identify these types of micro contaminants in water, differing by the degree of sophistication and information provided. Mass Spectrometry stands out for its accuracy and sensitivity in identifying toxins, making it possible to identify and characterize toxins produced by individual species of cyanobacteria, in low quantities. In this review, we seek to update some information about cyanobacterial peptides, their effects on biological systems, and the importance of the main Mass Spectrometry methods used for detection, extraction, identification and monitoring of cyanotoxins.

Exploring the ignored role of escaped algae in a pilot-scale DWDS: Disinfectant consumption, DBP yield and risk formation

Insufficient treatments during bloom-forming seasons allow algae to enter the subsequent drinking water distribution system (DWDS). Yet, scarce information is available regarding the role escaped algae to play in the DWDS, and how they interact with the system. Thus, three scenarios were conducted: a pilot DWDS with algae (a), pipe water (b), and pipe water with algae (c). Experimental results showed that, compared to biofilm and bulk water, escaped algae required fewer disinfectants. Competition for disinfectants varied with algal strains (Microcystis aeruginosa, MA; Pseudanabaena sp., PS) and disinfectant types (chlorine, Cl2; chloriamine, NH2Cl). Algae in the MA-Cl2 group showed the highest demand (6.25%-36.02%). However, the low-concentration disinfectants distributed to algae could trigger distinct algal status alternations. Cl2 diffused into intact MA cells and reacted with intracellular compositions. Damaged PS cells reached 100% within 2 h. Typical disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids and halogenated acetonitriles were examined. Disinfectant types and algal strains affected DBP yield and distribution. Although disinfectants consumed by algae might not promote dissolved DBP formation, especially for THMs. DBP formation of the other components was affected by escaped algae via changing disinfectant assignment (reduced by 45.45% for MA-Cl2) and transformation efficiency (by 34.52%). The cytotoxicity risks were estimated. Dissolved DBP-induced risks were not added when escaped algae occurred, whereas disruption and release of intracellular substances increased risks; the maximum cytotoxicity did not occur at 12 h rather than at the end (24 h). Overall, this study provided an innovative perspective on algal-related water quality issues in water systems.

Comparative study about ozonation to treat Microcystis-laden source water at the development and maintenance stage

The outbreak of toxic cyanobacteria blooms is hazardous to water safety. Ozonation has been used to treat cyanobacteria-laden source water. Generally, cyanobacterial blooms enter into a long-term maintenance stage from the bloom development, but how the changed bloom stage affects ozonation is still unknow. Herein, influences of ozonation on cell inactivation and microcystin removal of Microcystis at the development and maintenance stage, were investigated. Then, ozonation-assisted coagulation for Microcystis removal at the two stages was compared. Results showed no significant difference in the photosynthetic inactivation of Microcystis at both stages. Microcystis at the maintenance stage exhibited a lower loss of membrane integrity (268-480 M-1 s-1) than that at the development stage (413-596 M-1 s-1). However, the extracellular microcystin increased by 30-410% at the maintenance stage at a lower ratio of [O3: DOC] (0.10-0.80) compared to the development stage (0.21-1.68), mainly ascribed to a decrease in the ozonation efficiency for microcystin removal. This finding might result from the elevated biomass and N-containing organics as competitors to reduce microcystin ozonation. Meanwhile, it was possible to generate fewer hydroxyl radicals to oxidize microcystin at the maintenance stage than that at the development stage. Besides, the removal ratio of Microcystis after ozonation-assisted coagulation, was reduced by 46-230% at the maintenance stage, due to the insufficient modification of cellular surface or elevated organics of 3-30 kDa. This work indicated that ozonation is effective to treat Microcystis at the development stage of a bloom whist pre-ozonation might be an inappropriate choice at the long-term maintenance stage.

In Situ Observation of Cellular Structure Changes in and Chain Segregations of Anabaena sp. PCC 7120 on TiO2 Films under a Photocatalytic Device

Cyanobacteria outbreaks are serious water pollution events, causing water crises around the world. Photocatalytic disinfection, as an effective approach, has been widely used to inhibit blue algae growth. In this study, a tiny reaction room containing a TiO2 film was designed to fulfill in situ optical observation of the destruction process of a one-dimensional multicellular microorganism, Anabaena sp. PCC 7120, which is also a typical bacterial strain causing water blooms. It was found that the fragment number increased exponentially with the activation time. The fracture mechanics of the algae chains were hypothesized to be the combining functions of increased local tensile stress originated from the cell contracting as well as the oxidative attacks coming from reactive oxygen species (ROSs). It was assumed that the oxidative species were the root cause of cellular structure changes in and chain fractures of Anabaena sp. PCC 7120 in the photocatalytic inactivation activity.

Multiple roles of UV/KMnO4 in cyanobacteria containing water treatment: Cell inactivation & removal, and microcystin degradation

Cyanobacterial blooms present great challenges to drinking water treatment and human health. The novel combination of potassium permanganate (KMnO₄) and ultraviolet (UV) radiation is engaged as a promising advanced oxidation process in water purification. This study investigated the treatment of a typical cyanobacteria, Microcystis aeruginosa by UV/KMnO₄. Cell inactivation was significantly improved by UV/KMnO₄ treatment, compared to UV alone or KMnO₄ alone, and cells were completely inactivated within 35 min by UV/KMnO₄ in natural water. Moreover, effective degradation of associated microcystins was simultaneously achieved at UV fluence rate of 0.88 mW cm^-2 and KMnO₄ dosages of 3-5 mg L^-1. The significant synergistic effect is possibly attributable to the highly oxidative species produced during UV photolysis of KMnO₄. In addition, the cell removal efficiency via self-settling reached 87.9 % after UV/KMnO₄ treatment, without additional coagulants. The fast in situ generated manganese dioxide was responsible for the enhancement of M. aeruginosa cell removal. This study firstly reports multiple roles of UV/KMnO₄ process in cyanobacterial cell inactivation and removal, as well as simultaneous microcystin degradation under practical conditions.

Application of fluorescence spectra and molecular weight analysis in the identification of algal organic matter-based disinfection by-product precursors

Algal organic matter (AOM) is considered to be threatening for the consumption of disinfectants and the formation of disinfection by-products (DBPs) during the disinfection process. Incompatible parameters in the conventional pretreatment of algal-laden water will lead to counterproductive results, such as AOM release. Therefore, the generation of AOM and its conversion to DBPs during pretreatment should be observed. The characteristics of DBPs from extracellular organic matter (EOM) and intracellular organic matter (IOM) were epitomized and simulation experiments were conducted in deionized (DI) water and source water under pretreatment conditions. Differences in DBP formation between the different backgrounds during chlorination and powdered activated carbon (PAC) treatment were investigated. Instead of monotonous excitation-emission matrix (EEM) spectra, molecular weight (MW) fractionation was simultaneously applied to elucidate the mechanisms of chlorination and PAC adsorption on AOM-based DBPs. The fluorescence regional integration (FRI) EEM results showed a clear correlation between the fluorescent properties and MW distribution of AOM. A decreasing trend was observed after a rapid increase in fluorescence intensity during the chlorination and PAC treatment of water samples in the simulation experiments in deionized (DI) water and source water. The DBP formation potential (FP) in the source water was consistent with the change in AOM during chlorination and PAC adsorption. In addition, EEM showed decent predictability of AOM-based trihalomethanes (THM) FPs (R² = 0.77-0.99) invoking a combination with MW fractionation. Macromolecular protein compounds were highly correlated with the formation of dichloroacetonitrile (DCAN) (R² = 0.89-0.98). These post-mortems results imply that EEM spectra are a useful tool for identifying AOM-based precursors to reveal the accurate environmental fate and risk assessments of AOM.

Beneficial role of pre- and post-ozonation in a low rate biofiltration-ultrafiltration process treating reclaimed water

Previous studies have shown that the combination of biological and ozone oxidation processes can achieve a greater performance in treating natural surface water than each process individually. In this work, we designed and tested an ozonation-gravity-driven up-flow slow rate (0.01 m/h) biofiltration-ozonation (O₃-GUSB-O₃) process for the pre-treatment of reclaimed water prior to ultrafiltration (UF), with the aim of producing high quality drinking water and a significantly reduced degree of UF fouling. Results showed that O₃ coupled with GUSB can effectively remove aromatic compounds (∼ 84.8%), dissolved organic carbon (DOC, ∼ 83.4%), and biopolymers in surface water. In addition, post-ozonation greatly contributed to the reduction of the UF membrane fouling (∼ 6 times greater flux). With regard to the disinfection by-product formation potential (DBPFP) of the final treated water, both trihalomethane formation potential (THMFP) and haloacetic acid formation potential (HAAFP) were greatly reduced (86.4% and 84.8% for THMs and HAAs, respectively). The relationship between DBPFP and various spectral indexes revealed that aromatic compounds and amino acids were more likely to generate DBPs during the disinfection stage. Among these, humic substances were more likely to generate THMs, while low molecular weight carboxylate and carbonyl organic compounds were associated with the generation of HAAs. Moreover, the dosage of O₃ during the post-ozonation stage was found to influence directly the generation of DBPs. Overall, this study has conducted a detailed evaluation of a novel multi-ozone biofilter UF process for treating surface water, and the results provide a valuable basis for subsequent studies at larger scale to demonstrate the potential of the treatment process for practical applications.

Algae-containing raw water treatment and by-products control based on ClO2 preoxidation-assisted coagulation/precipitation process

Eutrophication has become a great concern in recent years with the algae blooms in source water resulting in a serious threat posing to the safety of drinking water. Chlorine dioxide (ClO₂) has been served as an alternative oxidant for preoxidation or disinfection during drinking water treatment process due to its high oxidation efficiency and low risk of organic by-products formation. However, the generation of inorganic by-products including chlorite (ClO₂^-) and chlorate (ClO₃^-) has become a potential problem when applied in drinking water treatment. In this study, ClO₂ preoxidation-assisted coagulation/precipitation process was applied to improve the raw water quality, especially algae, turbidity, chemical oxygen demand (COD_Mn), and UV₂₅₄, and explore the formation mechanisms of inorganic by-products. It was found that the polymeric aluminum chloride (PAC) and ClO₂ have shown the best raw water treatment performance with the optimal dosage of 10 mg/L and 0.8 mg/L, respectively. Moreover, the initial pH also has exhibited a notable influence on pollutants treatment and by-products generation. Due to the adverse influence of algae and natural organic matters (NOM) and the generation of by-products, it was significant to investigate their inhibition effect on the water quality and the production of ClO₂^- and ClO₃^- in the ClO₂ preoxidation-assisted coagulation/precipitation process. Moreover, it was applicable of this process to apply for the algae-containing raw water (calculated as Chl.a lower than 50 μg/L) treatment with the ClO₂ dosage of less than 0.8 mg/L to achieve optimum treatment performance and minimum by-products generation.

Kinetics and mechanism of ozonation to treat Microcystis-laden source waters affected by cell-viability

Toxic cyanobacteria are challenging drinking water safety globally, and their cell-viability declines at decay stage of a succussive bloom. Ozone might be a more effective oxidant to treat both high- and low-viability cyanobacteria than other common oxidants (e.g., chlorine, potassium permanganate). However, previous studies only conducted ozonation experiments using high-viability cyanobacteria, and potential influences of cell-viability on ozonation process, remains unknown. In this study, kinetics of ozone decay, cell inactivation, membrane destruction, and cyanotoxin fate of high- and low-viability Microcystis (the most common genus), was investigated, and associated mechanism was discussed. Results showed that low-viability Microcystis exhibited a higher rate constant of membrane destruction (665-744 M^-1 s^-1) than high-viability Microcystis (364-600 M^-1 s^-1) by equal concentrations of ozone, ascribed to loosely gelatinous sheath comprised with fewer organic matters as oxidant scavengers. Meanwhile, a higher rate constant of photosynthetic inactivation induced by ozonation, was observed for low-viability Microcystis (312-364 M^-1 s^-1) than that for high-viability Microcystis (168-294 M^-1 s^-1). However, elevated aromatic organics competitively inhibited microcystin ozonation for low-viability Microcystis, and hydroxyl radicals for microcystin oxidation could be reduced by elevated organic loads and alkalinity. Moreover, elevated ozone exposure (>51 mg min L^-1) did not totally oxidize microcystin with a residual of 30 μg L^-1 for low-viability Microcystis. These findings suggested that elevated microcystin risk would be the great barrier to limit ozonation application for low-viability Microcystis, even with benefits of higher cell inactivation compared to high-viability Microcystis.

Effect of vacuum ultraviolet/ozone pretreatment on alleviation of ultrafiltration membrane fouling caused by algal extracellular and intracellular organic matter

Algal blooms in source water can cause algal organic matter (AOM)-related membrane fouling in drinking water treatment. Herein, the effects of vacuum ultraviolet/ozone (VUV/O₃) pretreatment on alleviating ultrafiltration membrane fouling caused by AOM, including extracellular organic matter (EOM) and intracellular organic matter (IOM), were investigated systematically. Compared to its sub-processes (UV/O₃, O₃, VUV, and UV), VUV/O₃ pretreatment showed the best performance on AOM removal and membrane fouling mitigation. After VUV/O₃ pretreatment, the DOC of EOM and IOM in feed decreased by 51.1% and 26.7%, respectively, and fluorescence components and UV₂₅₄ of EOM and IOM in feed decreased obviously. Hence, the final specific fluxes of the membranes increased significantly under the impacts of VUV/O₃, and VUV/O₃ achieved 89.5% and 97.2% mitigation of reversible fouling caused by EOM and IOM, respectively. VUV/O₃ pretreatment also reduced the foulants on membrane surface and surface roughness. Moreover, under the effects of reactive oxygen species oxidation, VUV photolysis, and direct O₃ oxidation, VUV/O₃ decreased organic load and changed the molecular weight distribution, hydrophilicity, and interaction-free energy of AOM, thus mitigating membrane fouling. Furthermore, the effects of O₃ dosage and molecular weight cut-off of ultrafiltration membrane on membrane fouling mitigation by VUV/O₃ were also investigated. All results highlighted that VUV/O₃ pretreatment had huge potential in mitigating AOM-induced membrane fouling.

Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Pre-oxidation has been reported to be an effective way to remove algal cells in water, but the released algal organic matter (AOM) could be oxidized and lead to the increment in disinfection by-product (DBP) formation. The relationship between pre-oxidation and AOM-derived DBP formation needs to be approached more precisely. This study compared the impact of four pre-oxidants, ozone (O₃), chlorine dioxide (ClO₂), potassium permanganate (KMnO₄) and sodium hypochlorite (NaClO), on the formation of nitrogenous (N-) and carbonaceous (C-) DBPs in AOM chlorination. The characterization (fluorescent properties, molecular weight distribution and amino acids concentration) on AOM samples showed that the characterization properties variations after pre-oxidation were highly dependent on the oxidizing ability of oxidants. The disinfection experiments showed that O₃ increased DBP formation most significantly, which was consistent with the result of characterization properties variations. Then canonical correspondent analysis (CCA) and Pearson's correlation analysis were conducted based on the characterization data and DBP formation. CCA indicated that C-DBPs formation was highly dependent on fluorescent data. The formation of haloacetic acids (HAAs) had a positive correlation with aromatic protein-like component while trichloromethane (TCM) had a positive correlation with fulvic acid-like component. Pearson's correlation analysis showed that low molecular weight fractions were favorable to form N-DBPs. Therefore, characterization data could provide the advantages in the control of DBP formation, which further revealed that KMnO₄ and ClO₂ were better options for removing algal cells as well as limiting DBP formation.

Evidence-Based Framework to Manage Cyanobacteria and Cyanotoxins in Water and Sludge from Drinking Water Treatment Plants

Freshwater bodies and, consequently, drinking water treatment plants (DWTPs) sources are increasingly facing toxic cyanobacterial blooms. Even though conventional treatment processes including coagulation, flocculation, sedimentation, and filtration can control cyanobacteria and cell-bound cyanotoxins, these processes may encounter challenges such as inefficient removal of dissolved metabolites and cyanobacterial cell breakthrough. Furthermore, conventional treatment processes may lead to the accumulation of cyanobacteria cells and cyanotoxins in sludge. Pre-oxidation can enhance coagulation efficiency as it provides the first barrier against cyanobacteria and cyanotoxins and it decreases cell accumulation in DWTP sludge. This critical review aims to: (i) evaluate the state of the science of cyanobacteria and cyanotoxin management throughout DWTPs, as well as their associated sludge, and (ii) develop a decision framework to manage cyanobacteria and cyanotoxins in DWTPs and sludge. The review identified that lab-cultured-based pre-oxidation studies may not represent the real bloom pre-oxidation efficacy. Moreover, the application of a common exposure unit CT (residual concentration × contact time) provides a proper understanding of cyanobacteria pre-oxidation efficiency. Recently, reported challenges on cyanobacterial survival and growth in sludge alongside the cell lysis and cyanotoxin release raised health and technical concerns with regards to sludge storage and sludge supernatant recycling to the head of DWTPs. According to the review, oxidation has not been identified as a feasible option to handle cyanobacterial-laden sludge due to low cell and cyanotoxin removal efficacy. Based on the reviewed literature, a decision framework is proposed to manage cyanobacteria and cyanotoxins and their associated sludge in DWTPs.

Algal Inhibiting Effects of Salicylic Acid Sustained-Release Microspheres on Algae in Different Growth Cycles

Microcystis blooms and microcystins caused by eutrophication are harmful to the environment. At present, algicide based on allelochemicals is widely used in algae control. Environment-friendly sustained-release salicylate chitosan microspheres (SA-CS) were prepared by acylation of chitosan and glutaraldehyde. SA-CS was characterized by scanning electron microscopy, Fourier transform infrared spectral analysis, and laser particle sizer. The inhibitory effects of SA-CS on Microcystis aeruginosa at different stages, and the environmental impact of the inorganic index, were studied. The results showed that the mean size of SA-CS was 53.3 μm, the encapsulation rate was 40.66%, and SA-CS had a good sustained-release effect (stable release within 25 days). On the seventh day, a 90% inhibition rate in the lag phase required 105 mg/L of SA-CS, whereas a 90% inhibition rate in the log phase required 675 mg/L of SA-CS. The sensitivity of Microcystis aeruginosa at the lag phase to salicylic acid was about 1.4 times that of the log phase, thus, it is recommended to control the algae in the lag phase. The long-term inhibition effect of SA-CS on algae was detected after adding sufficient SA-CS. In terms of salicylic acid, pH, and dissolved oxygen, no lousy effect was observed for the addition of SA-CS. SA-CS could effectively reduce the concentration of microcystin-LR by 50%. SA-CS is an environment-friendly sustained-release microsphere with good algal inhibition performance for Microcystis aeruginosa.

Higher sensitivity to Cu2+ exposure of Microcystis aeruginosa in late lag phase is beneficial to its control

Cyanobacterial blooms are always treated in exponential phase, which demands high dosages of algicides (e.g., CuSO4). Actually, cyanobacterial blooms in late lag phase exhibit low cell-density and specific physiological/biochemical characteristics, implying the possibility of controlling blooms in a more efficient and economical way with CuSO4 treatment if cyanobacterial cells in late lag phase can be treated. In this study, the outbreakof a Microcystis bloom was simulated, and Microcystis samples in late lag and exponential phases were treated with CuSO4. The results showed that M. aeruginosa in late lag phase had a higher ratio of dividing-cells, Fv/Fm and intracellular total organic carbon content (TOC) than that in exponential phase, indicating that its metabolic activity was vigorous. M. aeruginosa in late lag phase could more easily be blocked, since a higher decrease in chlorophyll-a, Fv/Fm and membrane integrity occurred under the same dosages of CuSO4 exposure compared to M. aeruginosa in exponential phase. Meanwhile, microcystin release in late lag phase was less than that in exponential phase. Moreover, higher sensitivity in late lag phase was confirmed at the individual level, as the photosynthesis related genes psaB and rbcL were more down-regulated than those in exponential phase. In general, cyanobacteria in late lag phase exhibited higher sensitivity to CuSO4, indicating that CuSO4 treatments in late lag phase can achieve a higher control efficiency and fewer release of microcystin with low-dosages algicide. Hence, it is a more environmentally friendly strategy to control cyanobacterial blooms than the traditional strategy applied in exponential phase.

Development, Validation and Application of a Targeted LC-MS Method for Quantification of Microcystins and Nodularin: Towards a Better Characterization of Drinking Water

Cyanotoxins can be produced in surface waters by cyanobacterial blooms, mostly during summer and early autumn. Intoxications would result from consumption of water contaminated with the potent hepatotoxins, microcystins and nodularin. Therefore, the WHO has set a guideline value for drinking water quality concerning one congener of microcystin. Consequently, the design of a validated, public reference method to detect and quantify the hepatotoxins in drinking water is necessary. During this study, a method was developed to quantify cyanotoxins (eight microcystin congeners and nodularin) in water using liquid chromatography coupled with tandem mass spectrometry. Additionally, bottled and tap water samples were tested for the presence of cyanotoxins. No cyanotoxins were detected in any of the collected water samples. However, quality controls and the results of a proficiency test show the validity of the method.

Molecular insights into formation of nitrogenous disinfection byproducts from algal organic matter in UV-LEDs/chlorine process based on FT-ICR analysis

Eutrophication is a globally concerned issue, which brings algal cells and algal organic matter (AOM) into drinking water treatment plants. AOM is an important branch of nitrogenous disinfection byproduct (N-DBP) precursors. The variation of AOM composition in UV-LEDs/chlorine process, and its relationship with N-DBP formation still remain much uncertainty. Herein, we used fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) to investigate AOM transformation in UV-LEDs/chlorine process, with UV₂₈₅ and UV₃₆₅ as light source, and screen for typical precursors of N-DBPs. We found that more nitrogen-containing compounds were generated after UV-LEDs/chlorine process, leading to the larger formation of N-DBPs in postchlorination. Compounds such as lignin, proteins, and amino sugars tends to be oxidized by reactive species in UV-LEDs/chlorine process. Further, compounds with higher O/C and higher weighted average double bond equivalence (DBE_w) are easier to form N-DBPs, including dichloroacetonitrile and trichloronitromethane. Also, influence factors including pH, UV fluence, post-chlorination time and bromide concentration on N-DBP formation were evaluated. The results show that N-DBP formation generally followed the order of UV₂₈₅/chlorine-postchlorination, UV₃₆₅/chlorine-postchlorination, and direct chlorination. Our study provides comprehensive information on N-DBP formation from AOM in UV-LEDs/chlorine-postchlorination from molecular levels.

Moderate pre-ozonation coupled with a post-peroxone process remove filamentous cyanobacteria and 2-MIB efficiently: From bench to pilot-scale study

The increasing frequency and intensity of taste- and odour-producing cyanobacteria in water sources is a growing global issue. Odour events caused by 2-methylisoborneol (2-MIB) mainly arising from filamentous cyanobacteria have been a very common problem in water supply. Removal rates of filamentous cyanobacteria and 2-MIB by conventional water treatment, such as coagulation, and disinfection treatment processes is low. Hence, a moderate pre-ozonation of cyanobacteria (with little cell damage) was proposed in this study as an enhanced coagulation step to remove filamentous cyanobacteria and intracellular 2-MIB effectively, while avoiding the release of intracellular 2-MIB. A post-peroxone (O₃/H₂O₂) process was applied after sand filtration to degrade the residual dissolved 2-MIB. Results show that moderate pre-ozonation (0.2 mg/L O₃ oxidation for 20 min) can substantially enhance the coagulation efficiency for algae, with low cell lysis and high cell viability. Furthermore, 2.0 mg/L O₃ combined with 2.0 mg/L H₂O₂ can degrade the residual dissolved 2-MIB nearly 100% after 20 min reaction. Based on the optimal dosages, a 0.6 m³/h pilot system, including pre-ozonation, coagulation and sedimentation, sand filtration, and post-peroxone processes, was continuously run for 14 days, and it was found that the proposed process can effectively and stably remove filamentous cyanobacteria and 2-MIB.

Pre-oxidation of Microcystis aeruginosa-laden water by intensified chlorination: Impact of growth phase on cell degradation and in-situ formation of carbonaceous disinfection by-products

Algal growth strongly affects the change in characteristics of algal organic matter (AOM) in algae-laden water. AOM has adverse effects on algal cell removal from natural water by coagulation-sedimentation, frequently results in the significant formation of disinfection by-products (DBPs), such as trihalomethanes (THMs) and haloacetic acids (HAAs). This study aimed to investigate the effects of pre-chlorination on Microcystis aeruginosa (MA)-laden water collected in exponential and decline phases and the corresponding in-situ formed carbonaceous DBPs (C-DBPs) within 10 min exposure time. An automated fluorescent cell counter was used to determine the changes in cell degradation and viability, and fluorescent organic matters were characterized. The results have shown that MA cells suffer a faster and stronger degradation in chlorination at the exponential phase to cause more pronounced viability loss (>70%) than that at the decline phase, resulting in more significant released AOM degradation and C-DBPs formation, especially for THMs formation. In chlorination, a significant degradation in SMP-like and HA-like substances occurs at the exponential phase, while AP-like and SMP-like organics are predominantly degraded at the decline phase. Both THM and HAA precursors play an important role towards in-situ formation of C-DBPs at the exponential phase while THM precursors are dominant at the decline phase. THMs formation decreases with increasing HAAs formation over time during chlorination at the exponential phase, but stagnant THMs and HAAs formation occurs at the decline phase. Intensified pre-chlorination at high dosing ratio (Cl₂:DOC = 1:1) favors to facilitate in-situ formation of THMs. It is concluded that algal growth phase impact on cell removal and C-DBPs formation should be concerned for intensified pre-chlorination towards MA-laden water for drinking water treatment.

Elimination of Microcystis aeruginosa in water via dielectric barrier discharge plasma: Efficacy, mechanism and toxin release

Microcystis aeruginosa (M. aeruginosa), as the representative hazardous algae in cyanobacteria blooms, has long posed a threat to aquatic ecosystems. Here, a self-cooling dielectric barrier discharge plasma (DBDP) reactor was used to eliminate M. aeruginosa in water. The removal efficiency and mechanism of DBDP for M. aeruginosa and its toxin release during the treatment process was investigated. The results showed that over 99% of M. aeruginosa cells were removed by DBDP over 60 min under optimal conditions, and treated M. aeruginosa lost their ability to reproduce entirely. Reactive species generated in the self-cooling DBDP reactor damaged the membrane of M. aeruginosa, leading to leakage and degradation of dissolved organic matter. Increased intracellular reactive oxygen species accelerated the breakdown of protein and enzyme, and causes cell cytolysis. Eventually, M. aeruginosa was mineralized and lost its activity. The ·OH, ¹O₂ and ·O₂^- were crucial for inactivating M. aeruginosa. During the treatment process, the toxin microcystin-LR increased in the first 20 min, but declined over time: its concentration fell below 1 μg·mL^-1 after 60 min. This study provides insight into M. aeruginosa' s elimination in water by DBDP and has significant implications for developing a plasma technique to curtail cyanobacteria bloom.

Novel treatment of Microcystis aeruginosa using chitosan-modified nanobubbles

In this study, we treated harmful Microcystis aeruginosa cyanobacteria using chitosan-modified nanobubbles. The chitosan-modified nanobubbles (255 ± 19 nm) presented a positive zeta potential (15.36 ± 1.17 mV) and generated significantly (p < 0.05) more hydroxyl radicals than the negatively charged nanobubbles (-20.68 ± 1.11 mV). Therefore, the interaction between the positively charged chitosan-modified nanobubbles and negatively charged M. aeruginosa (-34.81 ± 1.79 mV) was favored. The chitosan-modified nanobubble treatment (2.20 × 10⁸ particles mL^-1) inactivated 73.16% ± 2.23% of M. aeruginosa (2.00 × 10⁶ cells mL^-1) for 24 h without causing significant cell lysis (≤0.25%) and completely inhibited the acute toxicity of M. aeruginosa toward Daphnia magna. The inactivation was correlated (r² = 0.97) with the formation of reactive oxygen species (ROS) in M. aeruginosa. These findings indicated that the hydroxyl radicals generated by the chitosan-modified nanobubbles disrupted cell membrane integrity and enhanced oxidative stress (ROS formation), thereby inactivating M. aeruginosa. Moreover, the penetration of the chitosan-modified nanobubbles and cell alterations in M. aeruginosa were visually confirmed. Our results suggested that the chitosan-modified nanobubble treatment is an eco-friendly method for controlling harmful algae. However, further studies are required for expanding its practical applications.

A critical review on operation and performance of source water control strategies for cyanobacterial blooms: Part I-chemical control methods

Cyanobacterial blooms produce nuisance metabolites (e.g., cyanotoxins and T&O compounds) thereby posing water quality management issues for aquatic sources used for potable water production, aquaculture, and recreation. A variety of in-lake/reservoir control measures are implemented to reduce the abundance of nuisance cyanobacteria biomass or decrease the amount of available phosphorous (P). This paper critically reviews the chemical control strategies implemented for in-lake/reservoir management of cyanobacterial blooms, i.e., algaecides and nutrient sequestering coagulants/flocculants, by highlighting (i) their mode of action, (ii) cases of successful and unsuccessful treatment, (iii) and factors influencing performance (e.g., water quality, process control techniques, source water characteristics, etc.). Algaecides generally result in immediate improvements in water quality and offer selective cyanobacterial control when peroxide-based alagecides are used. However, they have a range of limitations: causing cell lysis and release of cyanotoxins, posing negative impacts on aquatic plants and animals, leaving behind environmentally relevant treatment residuals (e.g., Cu in water and sediments), and offering only short-term bloom control characterized by cyanobacterial rebound. Coagulants/flocculants (alum, iron, calcium, and lanthanum bentonite) offer long-term internal nutrient control when external nutrient loading is controlled. Treatment performance is often influenced by background water quality conditions, and source water characteristics (e.g., surface area, depth, mixing regimes, and residence time). The reviewed case studies highlight that external nutrient load reduction is the most fundamental aspect of cyanobacterial control. None of the reviewed control strategies provide a comprehensive solution to cyanobacterial blooms.

Degradation effect of ultraviolet-induced advanced oxidation of chlorine, chlorine dioxide, and hydrogen peroxide and its impact on coagulation of extracellular organic matter produced by Microcystis aeruginosa

Implementation of an ultraviolet (UV)-induced advanced oxidation process (AOP) before coagulation was found to enhance the removal of algae cells. However, the effect of UV-induced AOPs on extracellular cellular organic matter (EOM) and on its coagulation and removal was neglected. This study investigated the impact of UV-induced AOPs (UV/Cl₂, UV/ClO₂, and UV/H₂O₂) on EOM from Microcystis aeruginosa, and its coagulation and removal by a conventional gravity system (CGS), dissolved air flotation, and a low-energy flash-pressurized flotation (FPF) process. The changes in EOM characteristics before and after the UV-induced AOPs were based on UV absorbance (UV₂₅₄) and liquid chromatography with organic carbon detection analysis. The reduction in UV₂₅₄ increased with an increasing dose of oxidant and UV irradiation. The reduction in UV₂₅₄ for UV/Cl₂, UV/ClO₂ and UV/H₂O₂ was 59.5%, 26.5%, and 17.5% respectively, for 0.71 mM equimolar concentration of oxidant and 1920 mJ/cm² UV irradiation, as evident from a pseudo-first order kinetics study. Similarly, degradation of the high molecular weight to low molecular weight (LMW) fraction was pronounced for UV/Cl₂. The coagulation efficiency decreased after UV-induced AOP in the following order: UV/H₂O₂ > UV/ClO₂ > UV/Cl₂. By contrast, the low-energy FPF process showed a higher removal of LMW fractions than CGS. Thus, low-energy FPF could be an alternative technology for the UV-induced AOP treatment system.

Diatomite-enhanced coagulation for algal removal in polluted raw water: performance optimization and pilot-scale study

Algae blooms have seriously threatened the health of aquatic ecosystems and the safety of drinking water. In this study, diatomite-enhanced coagulation technology was developed to improve the removal of algae and other pollutants. The dosage and ratio of diatomite and aluminum salts were optimized to 40mg/L and 1:1 which achieved algal removal efficiency of 98.8±0.65%. The effect of environmental factors was studied and it shows that cell density, pH, and temperature had a significant impact on algal removal. The mechanism of diatomite-enhanced coagulation was speculated to be adsorption bridging and sweep flocculation. Pilot-scale equipment was set up to verify the performance of diatomite-enhanced coagulation in engineering applications on algae polluted raw water. Results showed a better removal efficiency of algae, NH₄⁺-N, NO₂^--N, and COD_Mn and lower operation cost than the actual operation in the Waterwork Corporation were achieved with good application prospects and promotion value.

Cyanobacterial Harmful Algal Blooms in Aquatic Ecosystems: A Comprehensive Outlook on Current and Emerging Mitigation and Control Approaches

An intensification of toxic cyanobacteria blooms has occurred over the last three decades, severely affecting coastal and lake water quality in many parts of the world. Extensive research is being conducted in an attempt to gain a better understanding of the driving forces that alter the ecological balance in water bodies and of the biological role of the secondary metabolites, toxins included, produced by the cyanobacteria. In the long-term, such knowledge may help to develop the needed procedures to restore the phytoplankton community to the pre-toxic blooms era. In the short-term, the mission of the scientific community is to develop novel approaches to mitigate the blooms and thereby restore the ability of affected communities to enjoy coastal and lake waters. Here, we critically review some of the recently proposed, currently leading, and potentially emerging mitigation approaches in-lake novel methodologies and applications relevant to drinking-water treatment.

Fe2+ activating sodium percarbonate (SPC) to enhance removal of Microcystis aeruginosa and microcystins with pre-oxidation and in situ coagulation

The frequent occurrence of cyanobacterial blooms has become a concern for drinking water safety. Common pre-oxidation, which was widely considered to enhance the followed coagulation, can cause the rupture of algae cell, leading to the undesirable release of intracellular organic matter. In this study, the Fe²⁺ activating sodium percarbonate (SPC/Fe²⁺) process for pre-oxidation and in situ coagulation was proved to effectively remove Microcystis aeruginosa without damaging cell integrity at optimal combined doses of SPC (0.2 mM) and Fe²⁺ (0.2 mM). Moreover, the SPC/Fe²⁺ process can not only control the release of MCs, but also reduce extracellular MCs from 5.22 μg/L to 1.50 μg/L, due to their moderate oxidation. Meanwhile, the SPC/Fe²⁺ treatment produces low levels of residual Fe after settling. During sludge ageing, owing to oxidation damage on cells arising from the SPC/Fe²⁺ treatment, cells continually suffered severe damage and lysed on day 4, leading to large release of intracellular organic matter and MCs, correspondingly. As a result, it is worth noting that the M. aeruginosa cells in stored sludge should be treated or disposed of early. These findings support the development of a green and cost-effective technology to handle cyanobacteria-containing water based on SPC/Fe²⁺ for ensuring water quality.

Disinfection byproduct formation from algal organic matters after ozonation or ozone combined with activated carbon treatment with subsequent chlorination

Algal organic matter (AOM), including extracellular organic matter (EOM) and intracellular organic matter (IOM) from algal blooms, is widely accepted as essential precursors of disinfection byproducts (DBPs). This study evaluated the effect of ozonation or ozone combined with activated carbon (O₃-AC) treatment on characteristic alternation and DBP formation with subsequent chlorination of Chlorella sp.. The effects of pH and bromide concentration on DBP formation by ozonation or O₃-AC treatment were also investigated. Results showed that the potential formation of DBPs might be attributed to ozonation, but these DBP precursors could be further removed by activated carbon (AC) treatment. Moreover, the formation of target DBPs was controlled at acidic pH by alleviating the reactions between chlorine and AOM. Besides, the bromide substitution factor (BSF) value of trihalomethanes (THMs) from EOM and IOM remained constant after AC treatment. However, THM precursors could be significantly decreased by AC treatment. The above results indicated that O₃-AC was a feasible treatment method for algal-impacted water.

Insights into the underlying mechanisms for integrated inactivation of A. spiroides and depression of disinfection byproducts by plasma oxidation

Cyanobacteria blooms threaten water supply and are potential sources for disinfection byproducts (DBPs) formation. In this study, the underlying mechanisms for effective removal of A. spiroides and the following depression on the formation of DBPs were disclosed. Highly efficient inactivation (more than 99.99%) of A. spiroides was realized by the plasma treatment within 12 min, and 93.4% of Anatoxin-a was also removed within 12 min, with no signals of resurrection after 7 days' re-cultivation. Transcriptomic analysis demonstrated that the expressions of the genes related to cell walls and peripherals, thylakoid membranes, photosynthetic membranes, and detoxification of toxins were distinctly altered. The generated reactive oxidative species (ROS), including ·OH, O₂^·-, and ¹O₂, attacked A. spiroides and resulted in membrane damage and algae organic matter (AOM) release. EEM-PARAFAC analysis illustrated that the AOM compositions were subsequently decomposed by the ROS. As a result, the formation potentials of the C-DBPs and N-DBPs were significantly inhibited, due to the effectively removal of AOM and Anatoxin-a. This study disclosed the underneath mechanisms for the effective inactivation of A. spiroides and inhibition of the following formation of the DBPs, and supplied a prospective technique for integrated pollutant control of cyanobacterial containing drinking water.

Disinfection by-product formation potential of algogenic organic matter from Microcystis aeruginosa: Effects of growth phases and powdered activated carbon adsorption

Algae can exhibit different disinfection by-product formation potential (DBPFP) depending on the characteristics of the algogenic organic matter (AOM) released during growth. In this study, the amount of AOM released by Microcystis aeruginosa and its DBPFP were compared between the exponential growth phase and the death phase. Moreover, the efficiency of DBPFP removal through powdered activated carbon (PAC) adsorption was evaluated. The correlations between DBPFPs and dissolved organic carbon concentration or ultraviolet absorbance at 254 nm (UV₂₅₄) were also investigated to predict DBPFPs. Among DBPFPs, which were higher at the death phase, the formation potential (FP) of haloacetic acid was the highest. In addition, the high relative haloacetonitrile FP at the death phase indicated that a relevant portion of the intracellular organic matter derived from cell autolysis was converted into a large amount of haloacetonitriles. Furthermore, PAC addition reduced all DBPFPs at both growth phases. PAC was found to selectively adsorb dichloroacetic acid precursors at the death phase and dichloroacetonitrile precursors at both growth phases. Finally, UV₂₅₄ showed greater correlations with the three DBPFPs at all growth phases. These results highlight the possible use of UV₂₅₄ as an alternative analytical tool for fast determination of M. aeruginosa DBPFPs.

Impacts of pre-oxidation on the formation of disinfection byproducts from algal organic matter in subsequent chlor(am)ination: A review

Algae cells and algal organic matter (AOM) present in algae impacted source water pose a serious threat to the safety of drinking water. Conventional water treatment processes poorly remove AOM that can transform to harmful disinfection byproducts (DBPs) during ensuing disinfection. This article offers a comprehensive review on the impacts of pre-oxidation on the formation of DBPs from AOM in subsequent chlor(am)ination. Various characterization techniques for algal cells and AOM are first overviewed with an effort to better understanding of correlation between the AOM properties and downstream DBP formation. Then, the present work reviews recent studies on application of different pre-oxidation technologies, such as chlor(am) ination, UV irradiation, ozonation, ferrate (VI), permanganate oxidation and UV-based advanced oxidation processes (AOPs), to remove algal cells and degrade AOM. Pre-oxidation can reduce the stability of algal cells and inactivate algal cells for promoting cell aggregation and thus favoring coagulation. Meanwhile, pre-oxidation can mitigate and degrade AOM into small molecular weight organic compounds to reduce DBP formation potential during subsequent chlor(am)ination. Finally, this review provides an overall evaluation on the applicability of different pre-oxidation processes, and identifies future research demands.

Potential Impacts on Treated Water Quality of Recycling Dewatered Sludge Supernatant during Harmful Cyanobacterial Blooms

Cyanobacterial blooms and the associated release of cyanotoxins pose problems for many conventional water treatment plants due to their limited removal by typical unit operations. In this study, a conventional water treatment process consisting of coagulation, flocculation, sedimentation, filtration, and sludge dewatering was assessed in lab-scale experiments to measure the removal of microcystin-LR and Microcystis aeruginosa cells using liquid chromatography with mass spectrometer (LC-MS) and a hemacytometer, respectively. The overall goal was to determine the effect of recycling cyanotoxin-laden dewatered sludge supernatant on treated water quality. The lab-scale experimental system was able to maintain the effluent water quality below relevant the United States Environmental Protection Agency (US EPA) and World Health Organisation (WHO) standards for every parameter analyzed at influent concentrations of M. aeruginosa above 10⁶ cells/mL. However, substantial increases of 0.171 NTU (Nephelometric Turbidity Unit), 7 × 10⁴ cells/L, and 0.26 µg/L in turbidity, cyanobacteria cell counts, and microcystin-LR concentration were observed at the time of dewatered supernatant injection. Microcystin-LR concentrations of 1.55 µg/L and 0.25 µg/L were still observed in the dewatering process over 24 and 48 h, respectively, after the initial addition of M.aeruginosa cells, suggesting the possibility that a single cyanobacterial bloom may affect the filtered water quality long after the bloom has dissipated when sludge supernatant recycling is practiced.

Fenton-based technologies as efficient advanced oxidation processes for microcystin-LR degradation

In recent years, the safety and ecology threat of cyanobacterial burst has drawn wide concern, especially the release of toxic microcystin-LR (MC-LR). To break through the bottleneck of uncomplete MC-LR degradation by conventional physical-chemistry methods, Fenton-based advanced oxidation processes (AOPs) developed rapidly due to striking degradation efficiency through the potent hydroxyl radicals (HO·) oxidation. Herein, a comprehensive overview is presented on the recent achievements of the various Fenton-based technologies (including conventional Fenton, photo-Fenton, electro-Fenton, ozone-Fenton and sono-Fenton) for MC-LR degradation. In particular, the comparisons between various Fenton-based technologies about advantages and drawbacks are discussed. Based on analyzing the degradation intermediates and pathways, the destruction of Adda chain via hydroxylation was confirmed to be essential for detoxification of MC-LR. Roles of influencing factors such as MC-LR initial concentration, dosages of the catalyst and oxidant, environment alkalinity, natural organic matters (NOMs) as well as other inorganic ions are specifically summarized. This Review also gave special emphasis on technique optimization trends for Fenton application of MC-LR degradation, as well as key challenges and future opportunities in this fast developing field.

Comparison of Different Anode Materials to Remove Microcystis aeruginosa Cells Using Electro-Coagulation–Flotation Process at Low Current Inputs

Cyanobacterial blooms are a threat to the drinking water supply owing to their potential toxicity. Microcystins which are the most widespread cyanotoxins, are mainly produced by Microcystis spp. In this study, we cultured Microcystis aeruginosa cells in BG-11 medium at 25 °C to investigate the efficiency of the electro-coagulation–flotation process to remove them. Different anode materials (Fe, Al, Cu, and Zn) along with a graphite cathode were compared separately in the 10–100 mA current range in a 0.025 M Na2SO4 electrolyte. Turbidity, optical density at 684 nm (OD684), OD730, Chl-a concentration, and DOC concentration were analyzed to clarify the mechanism by which M. aeruginosa cells are removed. The Al anode indicated the highest removal efficiencies in terms of turbidity (90%), OD684 and OD730 (98%), and Chl-a concentration (96%) within 30 min at 4.0 mA/cm2 current density and the lowest average electrode consumption of 0.120 ± 0.023 g/L. The energy consumption of the Al electrode was 0.80 Wh/L. From these results, we found that Al was the best among the anode materials evaluated to remove M. aeruginosa cells. However, further studies are required to optimize the Al anode in terms of pH, treatment time, electrode distance, and electrolyte concentration to enhance the removal of M. aeruginosa cells.

The impact of preozonation on the coagulation of cellular organic matter produced by Microcystis aeruginosa and its toxin degradation

Ozonation pretreatment is typically implemented to improve algal cell coagulation. However, knowledge on the effect of ozonation on the characteristics and coagulation of associated algal organic matter, particularly cellular organic matter (COM), which is extensively released during algal bloom decay, is limited. Hence, this study aimed to elucidate the impact of ozonation applied before the coagulation of dissolved COM from the cyanobacteria Microcystis aeruginosa. Additionally, the degradation of microcystins (MCs) naturally present in the COM matrix was investigated. A range of ozone doses (0.1-1.0 mg O₃/mg of dissolved organic carbon - DOC) and ozonation pH values (pH 5, 7 and 9) were tested, while aluminium and ferric sulphate coagulants were used for subsequent coagulation. Despite negligible COM removal, ozonation itself eliminated MCs, and a lower ozone dose was required when performing ozonation at acidic or neutral pH (0.4 mg O₃/mg DOC at pH 5 and 7 compared to 0.8 mg O₃/mg DOC at pH 9). Enhanced MC degradation and a similar pattern of pH dependence were observed after preozonation-coagulation, whereas coagulation alone did not sufficiently remove MCs. In contrast to the benefits of MC depletion, preozonation using ≥ 0.4 mg O₃/mg DOC decreased the coagulation efficiency (from 42%/48% to 28%-38%/41%-44% using Al/Fe-based coagulants), which was more severe with increasing ozone dosage. Coagulation was also influenced by the preozonation pH, where pH 9 caused the lowest reduction in COM removal. The results indicate that ozonation efficiently removes MCs, but its employment before COM coagulation is disputable due to the deterioration of coagulation.

Diversity Assessment of Toxic Cyanobacterial Blooms during Oxidation

Fresh-water sources of drinking water are experiencing toxic cyanobacterial blooms more frequently. Chemical oxidation is a common approach to treat cyanobacteria and their toxins. This study systematically investigates the bacterial/cyanobacterial community following chemical oxidation (Cl₂, KMnO₄, O₃, H₂O₂) using high throughput sequencing. Raw water results from high throughput sequencing show that Proteobacteria, Actinobacteria, Cyanobacteria and Bacteroidetes were the most abundant phyla. Dolichospermum, Synechococcus, Microcystis and Nostoc were the most dominant genera. In terms of species, Dolichospermum sp.90 and Microcystis aeruginosa were the most abundant species at the beginning and end of the sampling, respectively. A comparison between the results of high throughput sequencing and taxonomic cell counts highlighted the robustness of high throughput sequencing to thoroughly reveal a wide diversity of bacterial and cyanobacterial communities. Principal component analysis of the oxidation samples results showed a progressive shift in the composition of bacterial/cyanobacterial communities following soft-chlorination with increasing common exposure units (CTs) (0–3.8 mg·min/L). Close cyanobacterial community composition (Dolichospermum dominant genus) was observed following low chlorine and mid-KMnO₄ (287.7 mg·min/L) exposure. Our results showed that some toxin producing species may persist after oxidation whether they were dominant species or not. Relative persistence of Dolichospermum sp.90 was observed following soft-chlorination (0.2–0.6 mg/L) and permanganate (5 mg/L) oxidation with increasing oxidant exposure. Pre-oxidation using H₂O₂ (10 mg/L and one day contact time) caused a clear decrease in the relative abundance of all the taxa and some species including the toxin producing taxa. These observations suggest selectivity of H₂O₂ to provide an efficient barrier against toxin producing cyanobacteria entering a water treatment plant.

Ozone Chemically Enhanced Backwash for Ceramic Membrane Fouling Control in Cyanobacteria-Laden Water

Membrane fouling in surface waters impacted by cyanobacteria is currently poorly controlled and results in high operating costs. A chemically enhanced backwash (CEB) is one possible strategy to mitigate cyanobacteria fouling. This research investigates the potential of using an ozone CEB to control the fouling caused by Microcystis aeruginosa in filtered surface water on a ceramic ultrafiltration membrane. Batch ozonation tests and dead-end, continuous flow experiments were conducted with ozone doses between 0 and 19 mg O3/mg carbon. In all tests, the ozone was shown to react more rapidly with the filtered surface water foulants than with cyanobacteria. In addition, the ozone CEB demonstrated an improved mitigation of irreversible fouling over 2 cycles versus a single CEB cycle; indicating that the ozone CEB functioned better as the cake layer developed. Ozone likely weakens the compressible cake layer formed by cyanobacteria on the membrane surface during filtration, which then becomes more hydraulically reversible. In fact, the ozone CEB reduced the fouling resistance by 35% more than the hydraulic backwash when the cake was more compressed.

Influences of the micropollutant erythromycin on cyanobacteria treatment with potassium permanganate

Cyanobacteria blooms and micropollutants (e.g., antibiotics) in source waters are two increasing environmental issues worldwide. This study hypothesized that the coexisting antibiotics may possibly alter the efficiency of water treatment processes through affecting the physiological and biochemical characteristics of cyanobacterial cells. A toxic strain of Microcystis aeruginosa was exposed to the common antibiotic erythromycin (ERY) at environmentally relevant concentrations; then, samples were collected on days 1, 4 and 6 to assess the efficiency of potassium permanganate (KMnO₄) in cyanobacteria oxidation. The percentage of intact cells remained constant after treatment with 2 mg L^-1 KMnO₄ in M. aeruginosa samples dosed with 0-5.0 μg L^-1 ERY. Although 6 mg L^-1 KMnO₄ could damage cyanobacterial cells, its ability was considerably reduced as the concentrations of ERY increased. KMnO₄ oxidation degraded the intracellular microcystins (MCs) in all of the cyanobacterial samples, even the samples with intact cells, possibly resulting from the stimulation of intracellular reactive oxygen species (ROS). The highest amounts of total MCs remained after oxidation with 2 and 6 mg L^-1 KMnO₄ in 0.2 μg L^-1 ERY-treated cyanobacterial samples, which may be due to large amounts of MC production. The 5.0 μg L^-1 ERY inhibited the growth of cyanobacterial cells and downregulated the expression of the MC synthesis gene (mcyB), which resulted in the lowest amounts of total MCs. However, it led to the highest concentration (4.6 μg L^-1) of extracellular MCs after treatment with 2 mg L^-1 KMnO₄ for 300 min. Generally, this study indicates that the effectiveness of KMnO₄ oxidation in cyanobacteria treatment decreased when the concentration of ERY increased. Hence, the possible risks caused by the coexistence of cyanobacteria and antibiotics, such as reduced efficiency of water treatment processes in cyanobacteria inactivation and degradation of the dissolved MCs, need to be taken into account.

Delayed Release of Intracellular Microcystin Following Partial Oxidation of Cultured and Naturally Occurring Cyanobacteria

Oxidation processes can provide an effective barrier to eliminate cyanotoxins by damaging cyanobacteria cell membranes, releasing intracellular cyanotoxins, and subsequently oxidizing these toxins (now in extracellular form) based on published reaction kinetics. In this work, cyanobacteria cells from two natural blooms (from the United States and Canada) and a laboratory-cultured Microcystis aeruginosa strain were treated with chlorine, monochloramine, chlorine dioxide, ozone, and potassium permanganate. The release of microcystin was measured immediately after oxidation (t ≤ 20 min), and following oxidant residual quenching (stagnation times = 96 or 168 h). Oxidant exposures (CT) were determined resulting in complete release of intracellular microcystin following chlorine (21 mg-min/L), chloramine (72 mg-min/L), chlorine dioxide (58 mg-min/L), ozone (4.1 mg-min/L), and permanganate (391 mg-min/L). Required oxidant exposures using indigenous cells were greater than lab-cultured Microcystis. Following partial oxidation of cells (oxidant exposures ≤ CT values cited above), additional intracellular microcystin and dissolved organic carbon (DOC) were released while the samples remained stagnant in the absence of an oxidant (>96 h after quenching). The delayed release of microcystin from partially oxidized cells has implications for drinking water treatment as these cells may be retained on a filter surface or in solids and continue to slowly release cyanotoxins and other metabolites into the finished water.

Impact of Hydrogen Peroxide and Copper Sulfate on the Delayed Release of Microcystin

Algicides, like hydrogen peroxide and copper sulfate, are commonly applied to recreational waters and drinking water sources to mitigate cyanobacterial blooms. In this work, the effects of hydrogen peroxide and copper sulfate were evaluated in two natural bloom samples (collected from Canadian and American waterbodies) and one lab-cultured Microcystis aeruginosa suspended in Colorado River water. Five algicide to dissolved organic carbon (DOC) dose ratios were evaluated during an initial exposure period of 24 h. One dose ratio (0.4 H2O2:DOC or 0.25 CuSO4:DOC) was then evaluated during stagnation after quenching (hydrogen peroxide) or extended exposure (copper sulfate) for up to 96 or 168 h. During the initial hydrogen peroxide exposure, the CA bloom had no release of intracellular microcystins (MCs) and the USA bloom only released MC at 4 H2O2:DOC. The reverse occurred with copper sulfate, where the CA bloom released MCs at 0.6 CuSO4:DOC but the USA bloom had no detectable extracellular MCs. Extracellular MC was released from the lab-cultured Microcystis at the lowest hydrogen peroxide and copper sulfate doses. In the hydrogen peroxide stagnation experiment, intracellular MC decreased in the USA bloom after 168 h despite the low dose applied. Similarly, the extended copper sulfate exposure led to intracellular MC decreases in both bloom samples after 168 h, despite showing no impact during the initial 24 h monitoring period. The lab-cultured Microcystis was again less resistant to both algicides, with releases observed after less than 2 h of stagnation or exposure. The damage to cells as measured by pigments during these experiments did not match the MC data, indicating that blooms with depressed pigment levels can still be a risk to nearby drinking water sources or recreational activities. These results provide insight on the timeline (up to one week) required for monitoring the potential release of MCs after algicide application.

Minimization of halogenated DBP precursors by enhanced PACl coagulation: The impact of organic molecule fraction changes on DBP precursors destabilization with Al hydrates

The destabilization of halogenated disinfection-by-product (DBP) precursors by coagulation are mostly subjected to Al speciation of polyaluminum chloride (PACl) and the fraction of dissolved organic matter (DOM), which significantly affect the minimization of halogenated DBP precursors, such as trihalomethane (THM) and haloacetic acids (HAA), in post-chlorination. In this study, the destabilization of DOM in the solution of humic acid (HA) with and without algogenic organic matter (AOM) using two PACl coagulants with different Al speciation was investigated, along with the identification of optical properties for DOM fractions. Additionally, total THM and HAA formation potential of the supernatant before and after coagulation-sedimentation were determined. The results showed that high polymeric Al-containing PACl (PACl-H, 66% Al₁₃) outcompetes in destabilizing HA than commercial PACl (PACl-C, 29% Al₁₃, 32% Al(OH)₃). However, the removal of DOM in HA/AOM mixture by both PACl coagulants are significantly suppressed with greater removal of humic-like and fulvic-like substances than aromatic protein-like substances after coagulation-sedimentation, where PACl-C shows superiority in the removal of hydrophobic and hydrophilic substances with MW around 1 kDa than PACl-H. In the absence of AOM, total THM and HAA formation potential were effectively reduced for HA coagulation by both PACl, but vice versa with the presence of AOM, especially for cellular organic matter (COM). Minimization of halogenated DPB precursors by coagulation are predominated by destabilized hydrophilic molecule fractions with Al hydrates. It is concluded that PACl-H favors charge neutralization to destabilize total carbonaceous DBP (C-DBP) precursors in HA or HA/AOM mixture and the corresponding C-DBP formation potential is lower compared to PACl-C that predominates adsorption and co-precipitation in destabilizing C-DBP precursors.

Effects of pre-ozonation on the cell characteristics and N-nitrosodimethylamine formation at three growth phases of Microcystis aeruginosa

Pre-oxidation in water treatment is considered an effective method to enhance the removal of algal cells and their exuded organic matters. However, pre-oxidation also alters the characteristics of algae and consequently influences disinfection processes. The existing studies mainly focused on the stationary growth phase, but little is known for the exponential and declined phases. The objectives of this study were to examine the effects of pre-ozonation on the integrity of algal cells, the release of algal organic matters, and the formation of disinfection by-products like N-nitrosodimethylamine (NDMA) from Microcystis aeruginosa (M. aeruginosa) at three growth phases. The results demonstrated that pre-ozonation was efficient to inactivate M. aeruginosa cells. The severity of M. aeruginosa cell damage increased as the ozone dosage increased from 0.5 to 2.0 mg/L. The damage of cell membranes resulted in the release of intracellular organic matters. Excitation-emission matrix spectra (EEMS) analysis indicated that ozone mainly reacted with soluble microbial products (SMP). With the increase of ozone concentration, although the trend of NDMA formation was similar for all three growth phases, more production of NDMA by algal cells was observed at the declined phase. In the post-disinfection process, chloramine showed the potential as a more suitable disinfectant than chlorination after pre-ozonation to minimize the NDMA formation. Therefore, appropriate pre-ozonation is beneficial to reduce the NDMA formation from exponential algae, while has no significant change during both stationary and declined phases.

Fast photocatalytic inactivation of Microcystis aeruginosa by metal-organic frameworks under visible light

In this work, Metal-organic Frameworks (MOFs) were applied to inactivate algae under visible light with low doses. Five MOFs with different compositions (Zn and Fe; carboxylates or imidazolates) were successfully synthesized and characterized by XRD, SEM and UV-vis. The effects of MOFs on Microcystis aeruginosa were evaluated with regard to morphology characteristics, physiological activity, cell integrity and pigment degradation. The results indicated that Ag/AgCl@ZIF-8 outperformed MOF-235, ZIF-8, Bi₂WO₆/MIL-100(Fe) and BiOBr/MOF-5 in the degradation of chlorophyll a at the dose of 10 mg L^-1. After 6 h of irradiation, 93.1% of Microcystis aeruginosa died and was unable to regrow and reproduce, which was demonstrated by changes in cell morphology, damage of cell membrane integrity and antioxidant enzyme system. Besides, the intracellular organic matter (IOM) and extracellular organic matter (EOM) were proven to be efficiently removed by MOF-assisted photocatalytic inactivation. Superoxide radical (O₂·^-) was demonstrated to be the major reactive oxygen species. A probable mechanism was proposed that the electrons in the valence band of Ag/AgCl@ZIF-8 transfer into the conduction band under irradiation to produce O₂·^- which inactivated the algae cells. Furthermore, Ag/AgCl@ZIF-8 can effectively remove Microcystis aeruginosa under sunlight and is of great application prospects for algae removal in real water bodies.