Survival of Escherichia coli in two sewage treatment plants using UV irradiation and chlorination for disinfection

Comparative genomic analysis of ESBL-selected and non-selected Escherichia coli in Australian wastewater: Elucidating differences in diversity, antimicrobial resistance, and virulence profiles

Extended-spectrum β-lactamases (ESBLs)-producing E. coli have been proposed as an indicator bacterium for antimicrobial resistance (AMR) surveillance within a OneHealth framework. However, it is important to understand the effects and potential biases ESBL-selection has on E. coli populations. Utilising whole genome sequencing, this study compared 80 ESBL-selected E. coli isolates with 201 non-selected isolates from Australian wastewater. The findings revealed significant variations between these cohorts in genetic diversity, AMR profiles, and carriage of virulence-associated genes (VAGs), plasmids, and the transmissible Locus of Stress Tolerance (tLST), a genomic island that imparts resistance to extreme heat and chlorination. The study highlights the predominance of certain sequence types (STs), particularly ST131 (75 % clade A), in ESBL-selected isolates (40 % vs 2 %) and overall the ESBL-selected isolates were largely multidrug-resistant (MDR), predominantly carrying genes for resistance to aminoglycosides, extended-spectrum β-lactams, fluoroquinolone, macrolides, sulphonamides/trimethoprim, and tetracyclines. The ESBLs identified were almost exclusively blaCTX-M genes, most commonly blaCTX-M-15 > blaCTX-M-27 > blaCTX-M-14. These were predominately carried on IncF plasmids or chromosomally (always ISEcp1 associated), in equal numbers. In contrast, 80 % of non-selected isolates carried no acquired ARGs, and none carried blaCTX-M genes. In both cohorts, extraintestinal pathogenic E. coli (ExPEC) was the dominate pathotype (35 % total) with few (4 % total) intestinal pathogenic E. coli pathotypes identified (aEPEC > ETEC > EAEC). Nevertheless, some clinically important genes were only identified in the non-selected group, namely tigecycline-resistance gene tet(X4) and AmpC ESBL blaCMY-2. Additionally, the presence of tLST, associated with higher metal resistance gene carriage (Ag, As, Cu, Hg, Ni), in a substantial portion of non-selected isolates (20 % vs 0 %), underscores environmental pressures shaping bacterial populations in wastewater ecosystems. These insights are important for developing comprehensive, less biased genomic surveillance strategies to understand and manage public health threats posed by pathogenic E. coli and AMR.

Proteomic profiling of antibiotic-resistant Escherichia coli GW-AmxH19 isolated from hospital wastewater treated with physical plasma

Microorganisms which are resistant to antibiotics are a global threat to the health of humans and animals. Wastewater treatment plants are known hotspots for the dissemination of antibiotic resistances. Therefore, novel methods for the inactivation of pathogens, and in particular antibiotic-resistant microorganisms (ARM), are of increasing interest. An especially promising method could be a water treatment by physical plasma which provides charged particles, electric fields, UV-radiation, and reactive species. The latter are foremost responsible for the antimicrobial properties of plasma. Thus, with plasma it might be possible to reduce the amount of ARM and to establish this technology as additional treatment stage for wastewater remediation. However, the impact of plasma on microorganisms beyond a mere inactivation was analyzed in more detail by a proteomic approach. Therefore, Escherichia coli GW-AmxH19, isolated from hospital wastewater in Germany, was used. The bacterial solution was treated by a plasma discharge ignited between each of four pins and the liquid surface. The growth of E. coli and the pH-value decreased during plasma treatment in comparison with the untreated control. Proteome and antibiotic resistance profile were analyzed. Concentrations of nitrite and nitrate were determined as long-lived indicative products of a transient chemistry associated with reactive nitrogen species (RNS). Conversely, hydrogen peroxide served as indicator for reactive oxygen species (ROS). Proteome analyses revealed an oxidative stress response as a result of plasma-generated RNS and ROS as well as a pH-balancing reaction as key responses to plasma treatment. Both, the generation of reactive species and a decreased pH-value is characteristic for plasma-treated solutions. The plasma-mediated changes of the proteome are discussed also in comparison with the Gram-positive bacterium Bacillus subtilis. Furthermore, no effect of the plasma treatment, on the antibiotic resistance of E. coli, was determined under the chosen conditions. The knowledge about the physiological changes of ARM in response to plasma is of fundamental interest to understand the molecular basis for the inactivation. This will be important for the further development and implementation of plasma in wastewater remediation.

Comparison of chlorine and chlorine dioxide disinfection in drinking water: Evaluation of disinfection byproduct formation under equal disinfection efficiency

Disinfection efficiency and disinfection byproduct (DBP) formation are two important aspects deserving careful consideration when evaluating different disinfection protocols. However, most of the previous studies on the selection of disinfection methods by comparing DBP formation were carried out under the same initial/residual dose and contact time of different disinfectants, and such a practice may cause overdose or underdose of a certain disinfectant, leading to the inaccurate evaluation of disinfection. In this study, a comprehensive and quantitative comparison of chlorine (Cl2) and chlorine dioxide (ClO2) disinfection was conducted with regard to their DBP formation under equal disinfection efficiency. The microbial inactivation models as well as the Cl2 and ClO2 demand models were developed. On such basis, the integral CT (ICT) values were determined and used as a bridge to connect disinfection efficiency and DBP formation. For 3-log10 and 4-log10 reductions of Pseudomonas aeruginosa, ClO2 had 1.5 and 5.8 times higher inactivation ability than Cl2, respectively. In the premise of equal disinfection efficiency (i.e., the ICT ratios of Cl2 to ClO2 = 1.5 and 5.8), the levels of total organic chlorine, total organic bromine, and total organic halogen formed in the Cl2 disinfection were significantly higher than those formed in the ClO2 disinfection. Among the 35 target aliphatic DBPs, trihalomethanes (THMs) and haloacetic acids (HAAs) were the dominant species formed in both Cl2 and ClO2 disinfection. The total THM levels formed in Cl2 disinfection were 14.6 and 30.3 times higher than those in ClO2 disinfection, respectively. The total HAA levels formed in Cl2 disinfection were 3.5 and 5.4 times higher than those in ClO2 disinfection, respectively. Formation of the target 48 aromatic DBPs was much favored in Cl2 disinfection than that in ClO2 disinfection, and the formation levels was dominated by contact time. This study demonstrated that ClO2 had significant advantages over Cl2, especially at higher microorganism inactivation and lower DBP formation requirements.

Solar/ClO2 system inactivates fungal spores in drinking water: Synergy, efficiency and mechanisms

The risk of fungal pollution in drinking water has been paid attention. Solar/chlorine dioxide (ClO2) combined system is an environment-friendly, economical and efficient disinfection method, especially for countries and regions that are economically backward and still exposed to unsafe drinking water. In this paper, the kinetics, influencing factors, mechanism and regrowth potential of inactivated Aspergillus niger (A. niger) spores by solar/ClO2 were reported for the first time. The inactivation curve can be divided into three stages: instant inactivation within 1-2 min, slow linear inactivation and finally a tail. The synergistic factors produced by solar/ClO2 in terms of log reduction and maximum inactivation rate were 1.194 and 1.112, respectively. The inhibitory effect on the regrowth of A. niger spores inactivated by solar/ClO2 was also stronger than that by ClO2 alone. Strongly oxidizing reactive species produced by solar/ClO2 accelerated the accumulation of endogenic reactive oxygen species (ROS) caused by oxidation stress of A. niger spores, improving the inactivation ability of the system. The inactivation order of A. niger spores was: loss of culturability, accumulation of intracellular ROS, loss of membrane integrity, leakage of intracellular species and change of morphology. The inactivation performance of solar/ClO2 was better than solar/chlor(am)ine according to the comparison of inactivation efficiency and regrowth potential. Results also suggested that solar/ClO2 process was more suitable for the treatment of ground water sources.

Regulatory Mechanisms of Quorum Sensing System of Bacteria in Response to Chlorine and Ozone Disinfection

Waterborne pathogens invariably present considerable threats to public health. The quorum sensing (QS) system is instrumental in coordinating bacterial growth and metabolisms. However, the responses and regulatory mechanisms of bacteria to various disinfection technologies through quorum sensing are still unclear. This study examines the inactivation effect of chlorination and ozonation on biofilms and planktonic cells of QS signaling-deficient mutants of Pseudomonas aeruginosa. Cell counting and viability assessment revealed that the combined disinfection of chlorine and ozone was the most effective for inactivating planktonic P. aeruginosa within 10 min of exposure. Additionally, microfluidic chip culture demonstrated that the secretion of quinolone signals escalated biofilms' disinfection resistance. Disinfection exposure significantly altered the gene expression of wild-type strains and QS signaling-deficient mutants. Moreover, the QS system triggered multilayered gene expression programs as a responsive protection to disinfectant exposure, including oxidative stress, ribosome synthesis, and the nutrient absorption of bacteria. These insights broaden our understanding of bacterial QS in response to disinfection, promising potential strategies toward efficient disinfection processes.

Determining the prevalence of Escherichia coli, Salmonella, and shiga toxin-producing Escherichia coli in manure of dairy lagoons

AIM

The aim of this study was to determine the prevalence of microbial pathogens in manure of dairy lagoons in California.

METHODS AND RESULTS

To determine pathogens in dairy manure stored in anaerobic lagoons of dairy farm, an extensive field study was conducted across California to sample manure from 20 dairy farms. Samples were analyzed to determine the prevalence of indicator Escherichia coli, Shiga toxin producing E. coli (STEC), Salmonella, and E. coli O157: H7. To test the E. coli, STEC, and Salmonella, we used agar culture-based method followed by polymerase chain reaction (PCR) method. In addition, a real- time PCR based method was used to determine the presence of E coli O157: H7. Study demonstrated that the prevalence of Salmonella in manure sample is lower than E. coli. The presence of Salmonella was found in 2.26% of the samples, and both the culture-based and PCR methods yielded comparable outcomes in detecting Salmonella. Moreover, ∼11.30% of the total samples out of the 177 were identified as positive for STEC by qPCR.

CONCLUSION

These findings demonstrate that indicator E. coli are abundantly present in anaerobic lagoons. However, the presence of STEC, and Salmonella is substantially low.

Removal of intI1, ARGs, and SARS-CoV-2 and changes in bacterial communities in four sewage treatment facilities

Currently, discharge regulations for wastewater treatment plants (WWTPs) are based on conventional parameters, but more is needed to ensure safe water reuse. In particular, emerging pollutants, as antimicrobials and antibiotic resistance genes (ARGs), are not considered. This research focuses on the fate of emerging biological contaminants during wastewater treatment in Mexico City. intI1 and the ARGs cphA-02, OXA-10 and sul1 were analyzed by qPCR; pathogenic bacteria species were characterized by high throughput sequencing of complete 16S rRNA gene, and fragments of SARS-CoV-2 were quantified by RT-qPCR. Conventional parameters (chemical oxygen demand and coliform bacteria) were also determined. Two sampling campaigns (rainy and dry seasons) were carried out in four municipal WWTPs in Mexico City, representing five biological treatment processes: conventional activated sludge, extended aeration activated sludge, membrane bioreactor, direct anaerobic digestion, and constructed wetland, followed by ultraviolet light or chlorine disinfection. In most cases, gene fragments of SARS-CoV-2 were eliminated below the detection limit of RT-qPCR. The abundance of intI1 positively correlated with the sul1, OXA-10, and cphA-02 abundances; intI1 and the ARGs here studied were partially removed in the WWTPs, and in most cases, the number of copies per second discarded in the sludge were higher those in the effluent. The treatment processes decreased the abundance of dominant bacterial groups in the raw wastewater, while enriching bacterial groups in the effluent and the biological sludge, with possible pollutant removal capabilities. Bacterial communities in the raw wastewater showed the predominance of the genus Arcobacter (from 62.4 to 86.0 %) containing potentially pathogenic species. Additionally, DNA of some species persisted after the treatment processes: A. johnsonii, A. junii, A. caviae, A. hydrophila, A. veronii, A. butzleri, A. cryaerophilus, Chryseobacterium indologenes, Hafnia paralvei, M. osloensis, Pseudomonas putida and Vibrio cholerae, which deserves special attention in future regulation for safe water reuse.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Preparation of a high-efficiency low-toxicity CdS/C60 bactericide and investigation of the mechanism

Photocatalysis is considered as a promising technology to solve bacterial contamination, but the development of efficient photocatalysts with a strong generalizable light response remains a challenge. CdS has a suitable energy gap and good response to visible light, but the photogenerated carrier separation efficiency is low, and the photo-corrosion phenomenon leads to the significant release of Cd²⁺. In this paper, the CdS/C₆₀ composite photocatalyst bactericide is synthesized via a simple one-step hydrothermal method. Testing via EIS, I-t, PL, and TRPL show that the C₆₀ in the composite improves the hole-electron separation efficiency of CdS, resulting in a better photocatalytic performance. The complete inactivation of S. aureus and E. coli can be achieved within 40 min and 120 min, respectively, by dispersing 100 μg mL^-1 of CdS/C₆₀-2 in a diluted bacterial solution under simulated visible-light irradiation. Combined with ESR, SEM, fluorescence staining, DNA gel electrophoresis and ICP technology, it is believed that the high inactivation of bacteria is attributed to the ROS produced during the photocatalytic process, which destroy the integrity of the bacterial cell membrane and further destroy the DNA inside the bacteria, thus causing bacterial inactivation, rather than the inactivation being caused by Cd²⁺ toxicity.

Photo-sterilization of groundwater by tellurium and enhancement by micro/nano bubbles

In rural areas where low-temperature groundwater is used as a drinking water source, cost-effective sterilization techniques are needed to prevent groundwater consumers from the disease risks triggered by pathogenic microorganisms like Escherichia coli and fungal spores. In this study, micro/nano bubbles (MNBs) coupled with the tellurium (Te)-based catalysts were used to considerably enhance the solar disinfection (SODIS) efficiency while overcoming the intrinsic defects of SODIS, particularly in low-temperature. Sterilization tests showed that 6.5 log₁₀ cfu/mL of E. coli K-12 and 4.0 log₁₀ cfu/mL of Aspergillus niger spores were completely inactivated within 5 min while applying this novel process for disinfection of raw groundwater, even in low-temperature. The underlying mechanisms of the extraordinary sterilization efficiency were revealed through comprehensive characterization of the catalysts and the physiological changes of the microorganisms. The localized surface plasmon resonance (LSPR) effect of the Te catalysts was identified to take advantage of photothermal synergism to achieve cell death. The integration of MNBs with the facet-engineered Te catalysts improved the photothermal catalytic effect and extracellular electron transfer, which substantially strengthened disinfection efficiency. This study provides a targeted solution into microbial inactivation in groundwater and emphasizes a cost-effective groundwater sterilization process.

Integrating life cycle assessment with quantitative microbial risk assessment for a holistic evaluation of sewage treatment plant

An integrated approach was employed in the present study to combine life cycle assessment (LCA) with quantitative microbial risk assessment (QMRA) to assess an existing sewage treatment plant (STP) at Roorkee, India. The midpoint LCA modeling revealed that high electricity consumption (≈ 576 kWh.day^-1) contributed to the maximum environmental burdens. The LCA endpoint result of 0.01 disability-adjusted life years per person per year (DALYs pppy) was obtained in terms of the impacts on human health. Further, a QMRA model was developed based on representative sewage pathogens, including E. coli O157:H7, Giardia sp., adenovirus, norovirus, and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The public health risk associated with intake of pathogen-laden aerosols during treated water reuse in sprinkler irrigation was determined. A cumulative health risk of 0.07 DALYs pppy was obtained, where QMRA risks contributed 86 % of the total health impacts. The annual probability of illness per person was highest for adenovirus and norovirus, followed by SARS-CoV-2, E. coli O157:H7 and Giardia sp. Overall, the study provides a methodological framework for an integrated LCA-QMRA assessment which can be applied across any treatment process to identify the hotspots contributing maximum environmental burdens and microbial health risks. Furthermore, the integrated LCA-QMRA approach could support stakeholders in the water industry to select the most suitable wastewater treatment system and establish regulations regarding the safe reuse of treated water.

Single-atom Ru loaded on layered double hydroxide catalyzes peroxymonosulfate for effective E. coli inactivation via a non-radical pathway: Efficiency and mechanism

The Fenton-like processes are considered to be one of the most promising strategies for inactivating bacteria due to their capacity to produce reactive oxygen species (ROS). Herein, a catalytic system for efficient inactivation of Escherichia coli (E. coli) was developed by anchoring single-atom Ru on layered double hydroxides (LDH). The Ru/NiFe-LDH catalyst showed excellent performance in activating peroxymonosulfate (PMS) to inactivate E. coli. Under the combined action of the ultra-low concentrations of Ru/NiFe-LDH (40 mg/L) and PMS (5 mg/L), 7 log E. coli can be totally inactivated within 90 s. This was attributed to the combined effect of single-atom Ru adsorption to E. coli and the ROS produced in situ. Mechanism studies indicated that the ¹O₂ with electrophilic properties was the key active species responsible for the rapid inactivation of E. coli. The E. coli inactivation process suggested that the ROS produced first attacked the outer membrane of the cell, then the antioxidant enzymes in the cell were induced, the macromolecule substances were released and mineralized, eventually leading to irreversible cell death. This work firstly loads monoatomic Ru on LDH for bacterial inactivation, providing a feasible method for rapid inactivation of E. coli.

Nanomaterial-enabled photothermal-based solar water disinfection processes: Fundamentals, recent advances, and mechanisms

The pathogenic microorganisms in water pose a great threat to human health. Photothermal and photothermocatalytic disinfection using nanomaterials (NPs) has offered a promising and effective strategy to address the challenges in solar water disinfection (SODIS), especially in the point-of-use operations. This review aims at providing comprehensive and state-of-the-art knowledge of photothermal-based disinfection by NPs. The fundamentals and principles of photothermal-based disinfection were first introduced. Then, recent advances in developing photothermal/photothermocatalytic catalysts were systematically summarized. The light-to-heat conversion and disinfection performance of a large variety of photothermal materials were presented. Given the complicated mechanisms of photothermal-based disinfection, the attacks from reactive oxygen species and heat, the destruction of bacterial cells, and the antibacterial effects of released metal ions were highlighted. Finally, future challenges and opportunities associated with the development of cost-effective photothermal/photothermocatalytic disinfection systems were outlined. This review will provide guidance in designing future NPs and inspire more research efforts from environmental nano-communities to move towards practical water disinfection operations.

Molecular and metabolic characteristics of wastewater associated Escherichia coli strains

We previously characterized the genetic diversity of Escherichia coli strains isolated from septic tanks in the Canberra region, Australia. In this study, we used repetitive element palindromic (REP) PCR fingerprinting to identify dominant REP-types belonging to phylogroups A and B1 strains across septic tanks. Subsequently, 76 E. coli strains were selected for whole-genome sequencing and phenotype microarrays. Comparative genome analysis was performed to compare septic tank E. coli genomes with a collection of 433 E. coli isolates from different hosts and freshwater. Clonal complexes (CCs) 10 (n = 15) and 399 (n = 10) along with sequence type (ST) 401 (n = 9) were the common lineages in septic tanks. CC10 strains have been detected from animal hosts and freshwater, whereas CC399 and ST401 strains appeared to be associated with septic tanks as they were uncommon in isolates from other sources. Comparative genome analysis revealed that CC399 and ST401 were genetically distinct from other isolates and carried an abundance of niche-specific traits involved in environmental adaptation. These strains also showed distinct metabolic characteristics, such as the ability to utilize pectin, which may provide a fitness advantage under nutrient-limited conditions. The results of this study characterized the adaptive mechanisms allowing E. coli to persist in wastewater.

Naturalized Escherichia coli in Wastewater and the Co-evolution of Bacterial Resistance to Water Treatment and Antibiotics

Antibiotic resistance represents one of the most pressing concerns facing public health today. While the current antibiotic resistance crisis has been driven primarily by the anthropogenic overuse of antibiotics in human and animal health, recent efforts have revealed several important environmental dimensions underlying this public health issue. Antibiotic resistant (AR) microbes, AR genes, and antibiotics have all been found widespread in natural environments, reflecting the ancient origins of this phenomenon. In addition, modern societal advancements in sanitation engineering (i.e., sewage treatment) have also contributed to the dissemination of resistance, and concerningly, may also be promoting the evolution of resistance to water treatment. This is reflected in the recent characterization of naturalized wastewater strains of Escherichia coli-strains that appear to be adapted to live in wastewater (and meat packing plants). These strains carry a plethora of stress-resistance genes against common treatment processes, such as chlorination, heat, UV light, and advanced oxidation, mechanisms which potentially facilitate their survival during sewage treatment. These strains also carry an abundance of common antibiotic resistance genes, and evidence suggests that resistance to some antibiotics is linked to resistance to treatment (e.g., tetracycline resistance and chlorine resistance). As such, these naturalized E. coli populations may be co-evolving resistance against both antibiotics and water treatment. Recently, extraintestinal pathogenic strains of E. coli (ExPEC) have also been shown to exhibit phenotypic resistance to water treatment, seemingly associated with the presence of various shared genetic elements with naturalized wastewater E. coli. Consequently, some pathogenic microbes may also be evolving resistance to the two most important public health interventions for controlling infectious disease in modern society-antibiotic therapy and water treatment.

Catalyst-Free Periodate Activation by Solar Irradiation for Bacterial Disinfection: Performance and Mechanisms

Periodate (PI)-based advanced oxidation process has recently attracted great attention in the water treatment processes. In this study, solar irradiation was used for PI activation to disinfect waterborne bacteria. The PI/solar irradiation system could inactivate Escherichia coli below the limit of detection (LOD, 10 CFU mL^-1) with initial concentrations of 1 × 10⁶, 1 × 10⁷, and 1 × 10⁸ CFU mL^-1 within 20, 40, and 100 min, respectively. ^•O₂^- and ^•OH radicals contributed to the bacterial disinfection. These reactive radicals could attack and penetrate the cell membrane, thereby increasing the amount of intracellular reactive oxygen species and destroying the intracellular defense system. The damage of the cell membrane caused the leakage of intracellular K⁺ and DNA (that could be eventually degraded). Excellent bacterial disinfection performance in PI/solar irradiation systems was achieved in a wide range of solution pH (3-9), with coexisting humic acid (0.1-10 mg L^-1) and broad solution ionic strengths (15-600 mM). The PI/solar irradiation system could also efficiently inactivate Gram-positive Bacillus subtilis. Moreover, PI activated by natural sunlight irradiation could inactivate 1 × 10⁷ CFU mL^-1 viable E. coli below the LOD in the river and sea waters with a working volume of 1 L in 40 and 50 min, respectively. Clearly, the PI/solar system could be potentially applied to disinfect bacteria in water.

Mechanism investigation for ultra-efficient photocatalytic water disinfection based on rational design of indirect Z-scheme heterojunction black phosphorus QDs/Cu2O nanoparticles

Photocatalysis has been regarded as a promising inactivation technology targeting to reduce drug-resistant bacteria contamination, but developing efficient photocatalysts with broad visible light harvesting capability is still a challenge. Here we report a MOFs-derived BPQDs/Cu₂O/N-doped hollow porous carbon (BP/CNC) with indirect Z-scheme heterojunctions (BPQDs/Cu₂O), which can inactivate 99.99999% Methicillin-resistant Staphylococcus aureus (MRSA) at a concentration of only 10 mg/L. Combining photoelectrochemical techniques and electrochemical measurements, the efficient inactivation process was attributed to the synergistic effect of enhanced light utilization and effective suppression of photogenerated carrier recombination. The mechanism of gradually damaged cell membrane for MRSA was studied by employing scanning electron microscopy (SEM), fluorescence staining and coagulase titer test to further decipher the changes in bacterial cells. We propose that reactive oxygen species (ROS) destroys the cell wall membrane and causes the leakage of cell contents, eventually leading to death. In addition, a series of in vitro and in vivo toxicity tests were conducted to evaluate the biocompatibility of the antibacterial system and its potential use in practice. This strategy of BPQDs/Cu₂O indirect heterojunction fabrication can spatially inhibit the recombination of photogenerated carriers, expands the light absorption range, providing a feasible method for disinfecting microbial contaminated water.

Mechanisms underlying the effect of chlorination and UV disinfection on VBNC state Escherichia coli isolated from hospital wastewater

The occurrence of viable but non-culturable (VBNC) bacteria in the wastewater system poses a huge threat to environmental and public health, in particular in hospital wastewater treatment system (HWTS). HWTS-oriented studies have been conducted to assess the effectiveness of chlorination and UV disinfection using indigenous bacteria. Results revealed that the VBNC Escherichia coli and ARGs remained persistent even at high chlorination (12 mg/L for 2.5 h) and UV doses (1000 mJ/cm²). The molecular mechanisms underlying chlorination-/UV-induced VBNC state in E. coli were explored through the transcriptomics and results suggested that most energy-dependent physiological activities (e.g., metabolism) have been suppressed in VBNC E. coli, while the pathogenicity-related genes varied insignificantly compared to the culturable cells, indicating that the VBNC E. coli could potentially display pathogenicity. Further Galleria mellonella model experiment has confirmed that although the disinfection-induced VBNC state made cells less infectious, these cells could regain their pathogenicity after resuscitation. This in vitro study can be used as a reference for studies on infections from VBNC bacteria and highlights the health risk due to VBNC pathogens in hospital effluents. There is a need to develop effluent standards specifically for healthcare facilities, and a stricter downstream disinfection strategy should be considered for the removal of VBNC cells and ARGs in the effluent.

Evaluating the impacts of leachate co-treatment on a full-scale municipal wastewater treatment plant in Canada

The objective of this study was to evaluate the impacts of leachate co-treatment on a full-scale municipal WWTPby comparing plant performance at varying levels of leachate contributions and hydraulic loadings.Leachate BOD:COD ratio was 0.08 ± 0.07 and indicated a stabilized, old matrix and concentrations of zinc, iron, aluminum, chloride and sulfate were 0.174, 38, 1.47, 1803 and 119.1 mg/L, respectively. The average volumetric leachate ratio (VLR%) was approximately 0.01% corresponding to a daily volume of 30 m³ but reaching a maximum of 270 m³(VLR% = 0.1%) and fluctuating on a daily-basis. A cluster analysis revealed 5 VLR% groupings that were used for subsequent analyses:no leachate, 0 < Low ≤ 0.001, 0.001 < Medium ≤ 0.02, 0.02 < High ≤ 0.05, 0.05 < Very high ≤ 0.2. Treated effluent concentrations of TKN, ammonia, fecal coliforms (FC),E. coli(EC), TSS and TP experienced atrend where effluent quality was improved at low and medium VLR%compared to no leachate addition, but deteriorated in high and very high VLR%.Treated effluent UVT% and EC were not statistically significantly different at varying VLR%, but FC was.Plant hydraulic had a significant impact on removal rates.Ammonia removals and nitrite concentrations improved inhigh flow conditions, whileTP, BOD and cBODremovals deteriorated. Finally,VLR%, leachate COD, TKN ammonia, chloride and arsenic had significant relationships with plant performance. Thus,for leachate with comparable age and strength, VLR% should not exceedlow to medium contributions(0 and 0.02%)during co-treatment at this WWTP.

Emerging 2D materials for antimicrobial applications in the pre- and post-pandemic era

Infectious diseases caused by viral or bacterial pathogens are one of the most serious threats to humanity. Moreover, they may lead to pandemics, as we have witnessed severely with the coronavirus disease 2019 (COVID-19). Nanotechnology, including technological developments of nano-sized materials, has brought great opportunities to control the spreading of such diseases. In the family of nano-sized materials, two-dimensional (2D) materials with intrinsic physicochemical properties can efficiently favor antimicrobial activity and maintain a safer environment to protect people against pathogens. For this purpose, they can be used alone or combined for the disinfection process of microbes, antiviral or antibacterial surface coatings, air filtering of medical equipment like face masks, or antimicrobial drug delivery systems. At the same time, they are promising candidates to deal with the issues of conventional antimicrobial approaches such as low efficacy and high cost. This review covers the antiviral or antibacterial activities of 2D materials and highlights their current and possible future applications. Considering their intrinsic properties, 2D materials will become part of the leading antimicrobial technologies for combating future pandemics anytime soon.

Antibiotic resistance patterns of Escherichia coli isolates from the clinic through the wastewater pathway

Antimicrobial resistance (AMR) remains one of the leading global health threats. This study compared antimicrobial resistance patterns among E. coli isolates from clinical uropathogenic Escherichia coli (UPEC) to hospital wastewater populations and throughout an urban wastewater treatment facility - influent, pre- and post-chlorinated effluents. Antibiotic susceptibility of 201 isolates were analyzed against eleven different antibiotics, and the presence of twelve antibiotic resistant genes and type 1 integrase were identified. AMR exhibited the following pattern: UPEC (46.8%) > hospital wastewater (37.8%) > urban post-chlorinated effluent (27.6%) > pre-chlorinated effluent (21.4%) > urban influent wastewater (13.3%). However, multi-drug resistance against three or more antimicrobial classes was more prevalent among hospital wastewater populations (29.7%) compared to other sources. E. coli from wastewaters disinfected with chlorine were significantly correlated with increased trimethoprim-sulfamethoxazole resistance in E. coli compared to raw and treated wastewater populations. bla_CTX-M-1 group was the most common extended spectrum beta-lactamase in E. coli from hospital wastewater (90%), although UPEC strains also encoded bla_CTX-M-1 group (50%) and bla_TEM (100%) genes. Among tetracycline-resistant populations, tetA and tetB were the only resistance genes identified throughout wastewater populations that were associated with increased phenotypic resistance. Further characterization of the E. coli populations identified phylogroup B2 predominating among clinical UPEC populations and correlated with the highest AMR, whereas the elevated rate of multi-drug resistance among hospital wastewater was mostly phylogroup A. Together, our findings highlight hospital wastewater as a rich source of AMR and multi-drug resistant bacterial populations.

Elucidating the Role of Virulence Traits in the Survival of Pathogenic E. coli PI-7 Following Disinfection

Reuse and discharge of treated wastewater can result in dissemination of microorganisms into the environment. Deployment of disinfection strategies is typically proposed as a last stage remediation effort to further inactivate viable microorganisms. In this study, we hypothesize that virulence traits, including biofilm formation, motility, siderophore, and curli production along with the capability to internalize into mammalian cells play a role in survival against disinfectants. Pathogenic E. coli PI-7 strain was used as a model bacterium that was exposed to diverse disinfection strategies such as chlorination, UV and solar irradiation. To this end, we used a random transposon mutagenesis library screening approach to generate 14 mutants that exhibited varying levels of virulence traits. In these 14 isolated mutants, we observed that an increase in virulence traits such as biofilm formation, motility, curli production, and internalization capability, increased the inactivation half-lives of mutants compared to wild-type E. coli PI-7. In addition, oxidative stress response and EPS production contributed to lengthening the lag phase duration (defined as the time required for exposure to disinfectant prior to decay). However, traits related to siderophore production did not help with survival against the tested disinfection strategies. Taken together, the findings suggested that selected virulence traits facilitate survival of pathogenic E. coli PI-7, which in turn could account for the selective enrichment of pathogens over the non-pathogenic ones after wastewater treatment. Further, the study also reflected on the effectiveness of UV as a more viable disinfection strategy for inactivation of pathogens.

EMA-amplicon-based sequencing informs risk assessment analysis of water treatment systems

Illumina amplicon-based sequencing was coupled with ethidium monoazide bromide (EMA) pre-treatment to monitor the total viable bacterial community and subsequently identify and prioritise the target organisms for the health risk assessment of the untreated rainwater and rainwater treated using large-volume batch solar reactor prototypes installed in an informal settlement and rural farming community. Taxonomic assignments indicated that Legionella and Pseudomonas were the most frequently detected genera containing opportunistic bacterial pathogens in the untreated and treated rainwater at both sites. Additionally, Mycobacterium, Clostridium sensu stricto and Escherichia/Shigella displayed high (≥80%) detection frequencies in the untreated and/or treated rainwater samples at one or both sites. Numerous exposure scenarios (e.g. drinking, cleaning) were subsequently investigated and the health risk of using untreated and solar reactor treated rainwater in developing countries was quantified based on the presence of L. pneumophila, P. aeruginosa and E. coli. The solar reactor prototypes were able to reduce the health risk associated with E. coli and P. aeruginosa to below the 1 × 10^-4 annual benchmark limit for all the non-potable uses of rainwater within the target communities (exception of showering for E. coli). However, the risk associated with intentional drinking of untreated or treated rainwater exceeded the benchmark limit (E. coli and P. aeruginosa). Additionally, while the solar reactor treatment reduced the risk associated with garden hosing and showering based on the presence of L. pneumophila, the risk estimates for both activities still exceeded the annual benchmark limit. The large-volume batch solar reactor prototypes were thus able to reduce the risk posed by the target bacteria for non-potable activities rainwater is commonly used for in water scarce regions of sub-Saharan Africa. This study highlights the need to assess water treatment systems in field trials using QMRA.

Genotypic and phenotypic traits of blaCTX-M-carrying Escherichia coli strains from an UV-C-treated wastewater effluent

Wastewater treatment plants (WWTPs) are relevant sources of antibiotic resistance into aquatic environments. Disinfection of WWTPs' effluents (e.g. by UV-C irradiation) may attenuate this problem, though some clinically relevant bacteria have been shown to survive disinfection. In this study we characterized 25 CTX-M-producing Escherichia coli strains isolated from a WWTP's UV-C-irradiated effluent, aiming to identify putative human health hazards associated with such effluents. Molecular typing indicated that the strains belong to the phylogroups A, B2 and C and clustered into 9 multilocus sequence types (STs), namely B2:ST131 (n = 7), A:ST58 (n = 1), A:ST155 (n = 4), C:ST410 (n = 2), A:ST453 (n = 2), A:ST617 (n = 2), A:ST744 (n = 1), A:ST1284 (n = 3) and a putative novel ST (n = 3). PCR-screening identified 9 of the 20 antibiotic resistance genes investigated [i.e. sul1, sul2, sul3, tet(A), tet(B), bla_OXA-1-like, aacA4, aacA4-cr and qnrS1]. The more prevalent were sul1, sul2 (n = 15 isolates) and tet(A) (n = 14 isolates). Plasmid restriction analysis indicated diverse plasmid content among strains (14 distinct profiles) and mating assays yielded cefotaxime-resistant transconjugants for 8 strains. Two of the transconjugants displayed a multi-drug resistance (MDR) phenotype. All strains were classified as cytotoxic to Vero cells (9 significantly more cytotoxic than the positive control) and 10 of 21 strains were invasive towards this cell line (including all B2:ST131 strains). The 10 strains tested against G. mellonella larvae exhibited a virulent behaviour. Twenty-four and 7 of the 25 strains produced siderophores and haemolysins, respectively. Approximately 66% of the strains formed biofilms. Genome analysis of 6 selected strains identified several virulence genes encoding toxins, siderophores, and colonizing, adhesion and invasion factors. Freshwater microcosms assays showed that after 28 days of incubation 3 out of 6 strains were still detected by cultivation and 4 strains by qPCR. Resistance phenotypes of these strains remained unaltered. Overall, we confirmed WWTP's UV-C-treated outflow as a source of MDR and/or virulent E. coli strains, some probably capable of persisting in freshwater, and that carry conjugative antibiotic resistance plasmids. Hence, disinfected wastewater may still represent a risk for human health. More detailed evaluation of strains isolated from wastewater effluents is urgent, to design treatments that can mitigate the release of such bacteria.

Characterization of water treatment-resistant and multidrug-resistant urinary pathogenic Escherichia coli in treated wastewater

A growing body of evidence has demonstrated that extraintestinal pathogenic E. coli (ExPEC), such as the urinary pathogenic E. coli (UPEC), are common constituents of treated wastewater, and therefore represent a potential public health risk. However, no single virulence gene, or set of virulence genes, can be used to conclusively identify this genetically diverse pathotype. As such we sought to identify and characterize the public health relevance of potential UPEC found in treated sewage/wastewater using a comparative genomics approach. Presumptive wastewater UPEC (W-UPEC) were initially identified by virulence gene screening against 5 virulence genes, and for which isolates containing ≥3 virulence genes were whole genome sequenced (n = 24). Single nucleotide polymorphic (SNP) spanning tree analysis demonstrated that many of these wastewater UPEC (WUPEC) were virtually identical at the core genome (0.4 Mbp) when compared to clinical UPEC (C-UPEC) sequences obtained from NCBI, varying by as little as 1 SNP. Remarkably, at the whole genome level, W-UPEC isolates displayed >96% whole genome similarity to C-UPEC counterparts in NCBI, with one strain demonstrating 99.5% genome similarity to a particular C-UPEC strain. The W-UPEC populations were represented by sequence types (ST) known to be clinically important, including ST131, ST95, ST127 and ST640. Many of the W-UPEC carried the exact same complement of virulence genes as their most closely related C-UPEC strains. For example, O25b-ST131 W-UPEC strains possessed the same 80 virulence genes as their most closely related C-UPEC counterparts. Concerningly, W-UPEC strains also carried a plethora of antibiotic resistance genes, and O25b-ST131strains were designated as extended spectrum beta-lactamase (ESBL) producing E. coli by both genome profiling and phenotypic resistance testing. W-UPEC ST131 strains were found in the effluents of a single treatment plant at different times, as well as different wastewater treatment plants, suggesting a differentially ability to survive wastewater treatment. Indeed, in sewage samples treated with chlorine doses sufficient for inducing a ∼99.99% reduction in total E. coli levels, UPEC represented a significant proportion of the chlorine-resistant population. By contrast, no Shiga toxin-producing E. coli were observed in these chlorinated sewage libraries. Our results suggest that clinically-relevant UPEC exist in treated wastewater effluents and that they appear to be specifically adapted to survive wastewater treatment processes.

Removal of Antibiotic Resistance Genes at Two Conventional Wastewater Treatment Plants of Louisiana, USA

Wastewater treatment plants (WWTPs) represent all known types of antibiotic resistance mechanisms and are considered as the critical points for the spread of antibiotic resistance genes (ARGs). The purpose of this study is to investigate the removal of a Class 1 integrase gene (intI1) and a selected set of ARGs (blaTEM, ermF, mecA, and tetA) at two conventional WWTPs by using chlorination in Louisiana, USA. We collected 69 wastewater samples (23 each from influent, secondary effluent, and final effluent) and determined the concentrations of ARGs by using quantitative polymerase chain reaction. All tested ARGs, except for mecA, were detected in 83–96% and 30–65% of influent and final effluent samples, respectively. Although the ARGs underwent approximately 3-log10 reduction, two WWTPs on an average still released 3.3 ± 1.7 log10 copies/mL of total ARGs studied in the effluents. Chlorination was found to be critical in the significant reduction of total ARGs (p < 0.05). Correlation analysis and the ability of intI1 to persist through the treatment processes recommend the use of intI1 as a marker of ARGs in effluents to monitor the spread of antibiotic resistance in effluents. Our study suggests that conventional WWTPs using chlorination do not favor the proliferation of antibiotic resistance bacteria and ARGs during wastewater treatment.

Disinfection characteristics of Pseudomonas peli, a chlorine-resistant bacterium isolated from a water supply network

Lack of microbial contamination is crucial for drinking water quality and safety. Chlorine-resistant bacteria in drinking water distribution systems pose a threat to drinking water quality. A bacterium was isolated from an urban water supply network in northern China and identified as Pseudomonas peli by 16S rDNA gene analysis. This P. peli strain had high chlorine tolerance. The CT value (the product of disinfectant concentration and contact time) to achieve 3 lg unit (i.e. 99.9%)-inactivation of this P. peli isolate was 51.26-90.36 mg min/L, inversely proportional to the free chlorine concentration. Chlorine dioxide could inactivate the bacterium faster and more efficiently than free chlorine, as shown by flow cytometry. Thiazole orange plus propidium iodide staining indicated that free chlorine and chlorine dioxide inactivated P. peli primarily by disrupting the integrity and permeability of the cell membrane. The P. peli was also sensitive to ultraviolet (UV) radiation; a UV dose of 40 mJ/cm² achieved 4 lg unit (99.99%)-inactivation. The Hom model was more suitable for analyzing the disinfection kinetics of P. peli than the Chick and Chick-Watson models.

Magnetic porous NiLa-Layered double oxides (LDOs) with improved phosphate adsorption and antibacterial activity for treatment of secondary effluent

The removal of phosphate (nutrient) and E. coli (pathogen) from secondary effluent is of great importance to control the water quality of the receiving water bodies. In this study, magnetic porous NiLa-layered double oxides (NiLa-LDOs/Fe₃O₄) were synthesized using a simple co-precipitation method. NiLa-LDOs/Fe₃O₄ exhibited a high phosphate adsorption capacity of 203.10 mg g^-1 in batch adsorption experiments, which can mostly be maintained within the pH range (5.5-8.5) and ionic strength range (5-20 mM) of secondary effluent, and in the presence of commonly co-existing species (anions and organics). NiLa-LDOs/Fe₃O₄ were further evaluated in real secondary effluent and the homogenous surface diffusion model (HSDM) was used to predict the performance in field applications. Under typical conditions, NiLa-LDOs/Fe₃O₄ can last for ∼1845-2448 bed volumes (BVs) before the phosphate concentration in the effluent exceeds the monthly average limit of 1 mg L^-1 P. Good regeneration capacities were also demonstrated in cyclic adsorption-desorption runs in both synthetic solution and secondary effluent. In addition, the presence of Ni and La species greatly enhanced the antibacterial performance of the NiLa-LDOs/Fe₃O₄ toward E. coli. Results obtained from this study indicate porous NiLa-LDOs/Fe₃O₄ can be a promising multifunctional material for the treatment of secondary effluent.

The Locus of Heat Resistance Confers Resistance to Chlorine and Other Oxidizing Chemicals in Escherichia coli

Some chlorine-resistant Escherichia coli isolates harbor the locus of heat resistance (LHR), a genomic island conferring heat resistance. In this study, the protective effect of the LHR for cells challenged by chlorine and oxidative stress was quantified. Cloning of the LHR protected against NaClO (32 mM; 5 min), H₂O₂ (120 mM; 5 min), and peroxyacetic acid (105 mg/liter; 5 min) but not against 5.8 mM KIO₄, 10 mM acrolein, or 75 mg/liter allyl isothiocyanate. The lethality of oxidizing treatments for LHR-negative strains of E. coli was about 2 log₁₀ CFU/ml higher than that for LHR-positive strains of E. coli The oxidation of cytoplasmic proteins and membrane lipids was quantified with the fusion probe roGFP2-Orp1 and the fluorescent probe BODIPY^581/591, respectively. The fragment of the LHR coding for heat shock proteins protected cytoplasmic proteins but not membrane lipids against oxidation. The middle fragment of the LHR protected against the oxidation of membrane lipids but not of cytoplasmic proteins. The addition of H₂O₂, NaClO, and peroxyacetic acid also induced green fluorescent protein (GFP) expression in the oxidation-sensitive reporter strain E. coli O104:H4 Δstx ₂::gfp::amp Cloning of pLHR reduced phage induction in E. coli O104:H4 Δstx ₂::gfp::amp after treatment with oxidizing chemicals. Screening of 160 strains of Shiga toxin-producing E. coli (STEC) revealed that none of them harbors the LHR, additionally suggesting that the LHR and Stx prophages are mutually exclusive. Taking our findings together, the contribution of the LHR to resistance to chlorine and oxidative stress is based on the protection of multiple cellular targets by different proteins encoded by the genetic island.IMPORTANCE Chlorine treatments are used in water and wastewater sanitation; the resistance of Escherichia coli to chlorine is thus of concern to public health. We show that a genetic island termed the locus of heat resistance (LHR) protects E. coli not only against heat but also against chlorine and other oxidizing chemicals, adding to our knowledge of the tools used by E. coli to resist stress. Specific detection of the oxidation of different cellular targets in combination with the cloning of fragments of the LHR provided insight into mechanisms of protection and demonstrated that different fragments of the LHR protect different cellular targets. In E. coli, the presence of the LHR virtually always excluded other virulence factors. It is tempting to speculate that the LHR is maintained by strains of E. coli with an environmental lifestyle but is excluded by pathogenic strains that adapted to interact with vertebrate hosts.

Catalyst-free activation of persulfate by visible light for water disinfection: Efficiency and mechanisms

The development of cost-effective water disinfection methods is highly desired to address the problems caused by outbreak of harmful microorganisms. Sulfate radical (•SO₄^-)-based advanced oxidation technology has attracted increasing attention. However, various catalysts or UV irradiation are usually used to activate persulfate (PS), which is high-cost and the recovery of nano-sized catalysts is also challenging. This work demonstrates a new method of catalyst-free activation of persulfate by visible light (VL) for bacterial inactivation. The 6-log of E. coli cells can be inactivated within 40 min and 7-log of E. coli cells could be inactivated within 120 min by the VL/PS system. The major responsive wavelength is 420 nm, and no heat activation of PS is found during VL irradiation. A synergistic effect with synergy factor of 51.2% is found when combining the VL irradiation with heating at 50 °C. The acidic pH is benefit for the VL/PS-triggered bacterial inactivation, while bicarbonate inhibits the E. coli inactivation at the range of 0.1-20 mg/L. Mechanism study indicates the main reactive species are •SO₄^-, •O₂^- and •OH, in which •SO₄^- plays the most important role. The bacterial inactivation process shows to begin from outer membrane to intracellular components. Subsequently, the antioxidant enzyme (i.e. SOD, CAT) is induced, followed by damaging to the genomic DNA leading to fatal death of the cells. In addition, the VL/PS system is also applicable for the inactivation of other pathogenic bacteria, including Staphylococcus aureus and Pseudomonas aeruginosa, showing universality for water disinfection applications. This work not only provides a new cost-effective disinfection method without a catalyst, but also sheds light on understanding the bacterial inactivation mechanism by •SO₄^--based AOPs.

Molybdenum sulfide Co-catalytic Fenton reaction for rapid and efficient inactivation of Escherichia coli

As a typical advanced oxidation technology, the Fenton reaction has been employed for the disinfection, owing to the strong oxidizability of hydroxyl radicals (·OH). However, the conventional Fenton system always exhibits a low H₂O₂ decomposition efficiency, leading to a low production yield of ·OH, which makes the disinfection effect unsatisfactory. Herein, we develop a molybdenum sulfide (MoS₂) co-catalytic Fenton reaction for rapid and highly efficient inactivation of Escherichia coli K-12 (E. coli) and Staphylococcus aureus (S. aureus). As a co-catalyst in the Fe(II)/H₂O₂ Fenton system, MoS₂ can greatly facilitate the Fe(III)/Fe(II) cycle reaction by the exposed Mo⁴⁺ active sites, which significantly improves the H₂O₂ decomposition efficiency for the ·OH production. As a result, the MoS₂ co-catalytic Fenton system can reach up to 83.37% of inactivation rate of E. coli just in 1 min and 100% of inactivation rate within 30 min, which increased by 2.5 times than that of the conventional Fenton reaction. Furthermore, the ·OH as the primary reactive oxygen species (ROS) in MoS₂ co-catalytic Fenton reaction was measured and verified by electron paramagnetic resonance (EPR) and photoluminescence (PL). It is demonstrated an increased amount of ·OH generated from the decomposition of H₂O₂ in the presence of MoS₂, which is responsible for the rapid and efficient inactivation of E. coli and S. aureus. This study provides a new perspective for rapid and highly efficient inactivation of bacteria in environmental remediation.

Enhanced Visible-Light-Driven Photocatalytic Bacterial Inactivation by Ultrathin Carbon-Coated Magnetic Cobalt Ferrite Nanoparticles

Ultrathin hydrothermal carbonation carbon (HTCC)-coated cobalt ferrite (CoFe₂O₄) composites with HTCC coating thicknesses between 0.62 and 4.38 nm were fabricated as novel, efficient, and magnetically recyclable photocatalysts via a facile, green approach. The CoFe₂O₄/HTCC composites showed high magnetization and low coercivity, which favored magnetic separation for reuse. The results show that the close coating of HTCC on CoFe₂O₄ nanoparticles enhanced electron transfer and charge separation, leading to a significant improvement in photocatalytic efficiency. The composites exhibited superior photocatalytic inactivation toward Escherichia coli K-12 under visible-light irradiation, with the complete inactivation of 7 log₁₀ cfu·mL^-1 of bacterial cells within 60 min. The destruction of bacterial cell membranes was monitored by field-effect scanning electron microscopy analysis and fluorescence microscopic images. The bacterial inactivation mechanism was investigated in a scavenger study, and ^•O₂, H₂O₂, and h⁺ were identified as the major reactive species for bacterial inactivation. Multiple cycle runs revealed that these composites had excellent stability and reusability. In addition, the composites showed good photocatalytic bacterial inactivation performance in authentic water matrices such as surface water samples and secondarily treated sewage effluents. The results of this work indicate that CoFe₂O₄/HTCC composites have great potential in large-scale photocatalytic disinfection operations.

Activation of persulfates by natural magnetic pyrrhotite for water disinfection: Efficiency, mechanisms, and stability

This study introduces natural occurring magnetic pyrrhotite (NP) as an environmentally friendly, easy available, and cost-effective alternative catalyst to activate persulfate (PS) of controlling microbial water contaminants. The E. coli K-12 inactivation kinetics observed in batch experiments was well described with first-order reaction. The optimum inactivation rate (k = 0.47 log/min) attained at a NP dose of 1 g/L and a PS dose of 1 mM, corresponding to total inactivation of 7 log₁₀ cfu/mL cells within 15 min. Measured k increased > 2-fold when temperature increased from 20 to 50 °C; and > 4-fold when pH decreased from 9 to 3. Aerobic conditions were more beneficial to cell inactivation than anaerobic conditions due to more reactive oxygen species (ROS) generated. ROS responsible for the inactivation were identified to be SO₄^- > OH > H₂O₂ based on a positive scavenging test and in situ ROS determination. In situ characterization suggested that PS effectively bind to NP surface was likely to form charge transfer complex (≡Fe(II)⋯O₃SOOSO₃^-), which mediated ROS generation and E. coli K-12 oxidation. The increased cell-envelope lesions consequently aggravated intracellular protein depletion and genome damage to cause definite bacterial death. The NP still maintained good physiochemical structure and stable activity even after 4 cycle. Moreover, NP/PS system also exhibited good E. coli K-12 inactivation efficiency in authentic water matrices like surface water and effluents of secondary wastewater.

Assessment of chlorine tolerance profile of Citrobacter species recovered from wastewater treatment plants in Eastern Cape, South Africa

This present study assessed the chlorine tolerance of some Citrobacter species recovered from secondary effluents from the clarifiers of two wastewater treatment plants in the Eastern Cape, South Africa. The bacterial survival, chlorine lethal dose and inactivation kinetics at lethal doses were examined. Inactivation of the test bacteria (n = 20) at the recommended dose of 0.5 mg/l for 30 min exposure showed a progressive reduction in bacterial population from 4 to 5 log reduction and residuals ranged between 0.12 and 0.46 mg/l. The bactericidal activity of chlorine increased at higher dosages with a substantial reduction in viability of the bacteria and complete inactivation of the bacterial population at a lethal dose of 0.75 and 1.0 mg/l in 30 min. For the inactivation kinetics, bactericidal activity of chlorine increased with time showing a 3.67-5.4 log reduction in 10 min, 4.0-5.6 log reduction in 20 min and above 6.3 log reductions to complete sterilization of bacterial population over 30 min for all the entire test Citrobacter isolates used in this study. Furthermore, there was a strong correlation (R ² > 0.84) between bacteria inactivation and increase in contact time. This study appears to have provided support for laboratory evidence of bacterial tolerance to chlorine disinfection at current recommended dose (0.5 mg/l for 30 min), and chlorine concentration between 0.75 and 1.0 mg/l was found to have a better disinfecting capacity to check tolerance of Citrobacter species.

Evidence of Naturalized Stress-Tolerant Strains of Escherichia coli in Municipal Wastewater Treatment Plants

Escherichia coli has been proposed to have two habitats—the intestines of mammals/birds and the nonhost environment. Our goal was to assess whether certain strains of E. coli have evolved toward adaptation and survival in wastewater. Raw sewage samples from different treatment plants were subjected to chlorine stress, and ∼59% of the surviving E. coli strains were found to contain a genetic insertion element (IS30) located within the uspC-flhDC intergenic region. The positional location of the IS30 element was not observed across a library of 845 E. coli isolates collected from various animal hosts or within GenBank or whole-genome reference databases for human and animal E. coli isolates (n = 1,177). Phylogenetics clustered the IS30 element-containing wastewater E. coli isolates into a distinct clade, and biomarker analysis revealed that these wastewater isolates contained a single nucleotide polymorphism (SNP) biomarker pattern that was specific for wastewater. These isolates belonged to phylogroup A, possessed generalized stress response (RpoS) activity, and carried the locus of heat resistance, features likely relevant to nonhost environmental survival. Isolates were screened for 28 virulence genes but carried only the fimH marker. Our data suggest that wastewater contains a naturalized resident population of E. coli. We developed an endpoint PCR targeting the IS30 element within the uspC-flhDC intergenic region, and all raw sewage samples (n = 21) were positive for this marker. Conversely, the prevalence of this marker in E. coli-positive surface and groundwater samples was low (≤5%). This simple PCR assay may represent a convenient microbial source-tracking tool for identification of water samples affected by municipal wastewater.

IMPORTANCE The results of this study demonstrate that some strains of E. coli appear to have evolved to become naturalized populations in the wastewater environment and possess a number of stress-related genetic elements likely important for survival in this nonhost environment. The presence of non-host-adapted strains in wastewater challenges our understanding of using E. coli as a microbial indicator of wastewater treatment performance, suggesting that the E. coli strains present in human and animal feces may be very different from those found in treated wastewater.

Strengths and Limitations of Model Systems for the Study of Urinary Tract Infections and Related Pathologies

Urinary tract infections (UTIs) are some of the most common bacterial infections worldwide and are a source of substantial morbidity among otherwise healthy women. UTIs can be caused by a variety of microbes, but the predominant etiologic agent of these infections is uropathogenic Escherichia coli (UPEC). An especially troubling feature of UPEC-associated UTIs is their high rate of recurrence. This problem is compounded by the drastic increase in the global incidence of antibiotic-resistant UPEC strains over the past 15 years. The need for more-effective treatments for UTIs is driving research aimed at bettering our understanding of the virulence mechanisms and host-pathogen interactions that occur during the course of these infections. Surrogate models of human infection, including cell culture systems and the use of murine, porcine, avian, teleost (zebrafish), and nematode hosts, are being employed to define host and bacterial factors that modulate the pathogenesis of UTIs. These model systems are revealing how UPEC strains can avoid or overcome host defenses and acquire scarce nutrients while also providing insight into the virulence mechanisms used by UPEC within compromised individuals, such as catheterized patients. Here, we summarize our current understanding of UTI pathogenesis while also giving an overview of the model systems used to study the initiation, persistence, and recurrence of UTIs and life-threatening sequelae like urosepsis. Although we focus on UPEC, the experimental systems described here can also provide valuable insight into the disease processes associated with other bacterial pathogens both within the urinary tract and elsewhere within the host.

Enhanced visible-light-driven photocatalytic inactivation of Escherichia coli using g-C3N4/TiO2 hybrid photocatalyst synthesized using a hydrothermal-calcination approach

Biohazards are widely present in wastewater, and contaminated water can arouse various waterborne diseases. Therefore, effectively removing biohazards from water is a worldwide need. In this study, a novel visible-light-driven (VLD) graphitic carbon nitride (g-C3N4)/TiO2 hybrid photocatalyst with high photocatalytic bacterial inactivation activity was successfully synthesized using a facile hydrothermal-calcination approach. The optimum synthesized hybrid photocatalyst is composed of micron-sized TiO2 spheres (average diameter: ca. 2 μm) and wrapped with lamellar g-C3N4 (thickness: ca. 2 nm), with narrowing bandgap (ca. 2.48 eV), leading to a significant improvement of visible light (VL) absorption and effective separation of photo-generated electron-hole pairs. This greatly enhances VL photocatalytic inactivation activity towards bacteria in water. Using this hybrid photocatalyst, 10(7) cfu mL(-1) of Escherichia coli K-12 could be completely inactivated within 180 min under VL irradiation. SEM images indicate that bacterial cells were greatly damaged, leading to a severe leakage of intracellular components during photocatalytic inactivation processes. The study concludes that bacterial cell destruction and water disinfection can be achieved using this newly fabricated VLD hybrid photocatalyst.

Inactivation of antibiotic resistance genes in municipal wastewater by chlorination, ultraviolet, and ozonation disinfection

This study investigated the inactivation of two antibiotic resistance genes (ARGs)-sul1 and tetG, and the integrase gene of class 1 integrons-intI1 by chlorination, ultraviolet (UV), and ozonation disinfection. Inactivation of sul1, tetG, and intI1 underwent increased doses of three disinfectors, and chlorine disinfection achieved more inactivation of ARGs and intI1 genes (chlorine dose of 160 mg/L with contact time of 120 min for 2.98-3.24 log reductions of ARGs) than UV irradiation (UV dose of 12,477 mJ/cm(2) for 2.48-2.74 log reductions of ARGs) and ozonation disinfection (ozonation dose of 177.6 mg/L for 1.68-2.55 log reductions of ARGs). The 16S rDNA was more efficiently removed than ARGs by ozone disinfection. The relative abundance of selected genes (normalized to 16S rDNA) increased during ozonation and with low doses of UV and chlorine disinfection. Inactivation of sul1 and tetG showed strong positive correlations with the inactivation of intI1 genes (for sul1, R (2)  = 0.929 with p < 0.01; for tetG, R (2)  = 0.885 with p < 0.01). Compared to other technologies (ultraviolet disinfection, ozonation disinfection, Fenton oxidation, and coagulation), chlorination is an alternative method to remove ARGs from wastewater effluents. At a chlorine dose of 40 mg/L with 60 min contact time, the selected genes inactivation efficiency could reach 1.65-2.28 log, and the cost was estimated at 0.041 yuan/m(3).

Inactivation of antibiotic resistance genes in municipal wastewater effluent by chlorination and sequential UV/chlorination disinfection

This study investigated disinfection methods including chlorination, ultraviolet (UV) irradiation and sequential UV/chlorination treatment on the inactivation of antibiotic resistance genes (ARGs). ARGs including sul1, tetX, tetG, intI1, and 16S rRNA genes in municipal wastewater treatment plant (MWTP) effluent were examined. The results indicated a positive correlation between the removal of ARGs and chlorine dosage (p=0.007-0.014, n=6),as well as contact time (p=0.0001, n=10). Greater free chlorine (FC) dosage leads to higher removal for all the genes and the maximum removal (1.30-1.49 logs) could be achieved at FC dosage of 30 mg L(-1). The transformation kinetic data for ARGs removal (log C0/C) followed the second-order reaction kinetic model with FC dosage (R(2)=0.6829-0.9999) and contact time (R(2)=0.7353-8634), respectively. Higher ammonia nitrogen (NH3-N) concentration was found to lead to lower removal of ARGs at the same chlorine dosage. When the applied Cl2:NH3-N ratio was over 7.6:1, a significant reduction of ARGs (1.20-1.49 logs) was achieved. By using single UV irradiation, the log removal values of tetX and 16Ss rRNA genes were 0.58 and 0.60, respectively, while other genes were 0.36-0.40 at a fluence of 249.5 mJ cm(-2), which was observed to be less effective than chlorination. With sequential UV/chlorination treatment, 0.006 to 0.31 log synergy values of target genes were observed under different operation parameters.

Evaluation of novel, cationic electrospun microfibrous membranes as adsorbents in bacteria removal

Cationic, methacrylate-based electrospun microfibrous membranes have been evaluated as adsorbents for the removal of Gram-negative bacteria namely Pseudomonas aeruginosa and Advenella species from synthetic aqueous media and urban wastewater.