Bioanalytical and chemical evaluation of disinfection by-products in swimming pool water

Toxicity and underlying lipidomic alterations generated by a mixture of water disinfection byproducts in human lung cells

Complex mixtures of disinfection by-products (DBPs) are present in disinfected waters, but their mixture toxicity has been rarely described. Apart from ingestion, DBP exposure can occur through inhalation, which may lead to respiratory effects in highly exposed individuals. However, the underlying biological mechanisms have yet to be elucidated. This study aimed to investigate the toxicity of a mixture of 10 DBPs, including haloacetic acids and haloaromatics, on human alveolar A549 cells by assessing their cytotoxicity, genotoxicity, and impact on the cell lipidome. A DBP mixture up to 50 μM slightly reduced cell viability, induced the generation of reactive oxygen species (ROS) up to 3.5-fold, and increased the frequency of micronuclei formation. Exposure to 50 μM DBP mixture led to a significant accumulation of triacylglycerides and a decrease of diacylglycerides and phosphatidylcholines in A549 cells. Lipidomic profiling of extracellular vesicles (EVs) released in the culture medium revealed a marked increase in cholesterol esters, sphingomyelins, and other membrane lipids. Overall, these alterations in the lipidome of cells and EVs may indicate a disruption of lipid homeostasis, and thus, potentially contribute to the respiratory effects associated with DBP exposure.

Perspectives and understanding on the occurrence, toxicity and abatement technologies of disinfection by-products in drinking water

Disinfection by-products (DBPs) are one of the significant emerging contaminants that have caught the attention of researchers worldwide due to their pervasiveness. Their presence in drinking water, even in shallow concentrations (in levels of parts per billion), poses considerable health risks. Therefore, it is crucial to understand their kinetics to understand better their formation and persistence in the water supply systems. This manuscript demonstrates different aspects of research carried out on DBPs in the past. A systematic approach was adopted for the bibliographical research that started with choosing appropriate keywords and identifying the most relevant manuscripts through the screening process. This follows a quantitative assessment of the extracted literature sample, which included the most productive and influential journal sources, the most widely used keywords, the most influential authors active in the research domain, the most cited articles, and the countries most actively engaged in the research field. Critical observations on the literature sample led to the qualitative assessment, wherein the past and current research trends were observed and reported. Finally, we identified the essential gaps in the available literature, which further led to recommending the course ahead in the research domain. This study will prove fruitful for young and established researchers who are or wish to work in this emerging field of research.

In vitro bioassays for monitoring drinking water quality of tap water, domestic filtration and bottled water

BACKGROUND

Location-specific patterns of regulated and non-regulated disinfection byproducts (DBPs) were detected in tap water samples of the Barcelona Metropolitan Area. However, it remains unclear if the detected DBPs together with undetected DPBs and organic micropollutants can lead to mixture effects in drinking water.

OBJECTIVE

To evaluate the neurotoxicity, oxidative stress response and cytotoxicity of 42 tap water samples, 6 treated with activated carbon filters, 5 with reverse osmosis and 9 bottled waters. To compare the measured effects of the extracts with the mixture effects predicted from the detected concentrations and the relative effect potencies of the detected DBPs using the mixture model of concentration addition.

METHODS

Mixtures of organic chemicals in water samples were enriched by solid phase extraction and tested for cytotoxicity and neurite outgrowth inhibition in the neuronal cell line SH-SY5Y and for cytotoxicity and oxidative stress response in the AREc32 assay.

RESULTS

Unenriched water did not trigger neurotoxicity or cytotoxicity. After up to 500-fold enrichment, few extracts showed cytotoxicity. Disinfected water showed low neurotoxicity at 20- to 300-fold enrichment and oxidative stress response at 8- to 140-fold enrichment. Non-regulated non-volatile DBPs, particularly (brominated) haloacetonitriles dominated the predicted mixture effects of the detected chemicals and predicted effects agreed with the measured effects. By hierarchical clustering we identified strong geographical patterns in the types of DPBs and their association with effects. Activated carbon filters did not show a consistent reduction of effects but domestic reverse osmosis filters decreased the effect to that of bottled water.

IMPACT STATEMENT

Bioassays are an important complement to chemical analysis of disinfection by-products (DBPs) in drinking water. Comparison of the measured oxidative stress response and mixture effects predicted from the detected chemicals and their relative effect potencies allowed the identification of the forcing agents for the mixture effects, which differed by location but were mainly non-regulated DBPs. This study demonstrates the relevance of non-regulated DBPs from a toxicological perspective. In vitro bioassays, in particular reporter gene assays for oxidative stress response that integrate different reactive toxicity pathways including genotoxicity, may therefore serve as sum parameters for drinking water quality assessment.

Genotoxicity and endocrine disruption potential of haloacetic acids in human placental and lung cells

Chlorination of water results in the formation of haloacetic acids (HAAs) as major disinfection byproducts (DBPs). Previous studies have reported some HAAs species to act as cytotoxic, genotoxic, and carcinogenic. This work aimed at further exploring the toxicity potential of the most investigated HAAs (chloroacetic (CAA), bromoacetic (BAA), iodoacetic (IAA) acid) and HAAs species with high content of bromine (tribromoacetic acid (TBAA)), and iodine in their structures (chloroiodoacetic (CIAA) and diiodoacetic acid (DIAA)) to human cells. Novel knowledge was generated regarding cytotoxicity, oxidative stress, endocrine disrupting potential, and genotoxicity of these HAAs by using human placental and lung cells as in vitro models, not previously used for DBP assessment. IAA showed the highest cytotoxicity (EC₅₀: 7.5 μM) and ability to generate ROS (up to 3-fold) in placental cells, followed by BAA (EC₅₀: 20-25 μM and 2.1-fold). TBAA, CAA, DIAA, and CIAA showed no significant cytotoxicity (EC₅₀ > 250 μM). All tested HAAs decreased the expression of the steroidogenic gene hsd17b1 up to 40 % in placental cells, and IAA and BAA (0.01-1 μM) slightly inhibited the aromatase activity. HAAs also induced the formation of micronuclei in A549 lung cells after 48 h of exposure. IAA and BAA showed a non-significant increase in micronuclei formation at low concentrations (1 μM), while BAA, CAA, CIAA and TBAA were genotoxic at exposure concentrations above 10 μM (100 μM in the case of DIAA). These results point to genotoxic and endocrine disruption effects associated with HAA exposure at low concentrations (0.01-1 μM), and the usefulness of the selected bioassays to provide fast and sensitive responses to HAA exposure, particularly in terms of genotoxicity and endocrine disruption effects. Further studies are needed to define thresholds that better protect public health.

Disinfection byproducts in indoor swimming pool water: Detection and human lifetime health risk assessment

Quantification of regulated and emerging disinfection byproducts (DBPs) in swimming pool water, as well as the assessment of their lifetime health risk are limited in China. In this study, the occurrence of regulated DBPs (e.g., trihalomethanes, haloacetic acids) and emerging DBPs (e.g., haloacetonitriles, haloacetaldehydes) in indoor swimming pool water and the corresponding source water at a city in Eastern China were determined. The concentrations of DBPs in swimming pool water were 1-2 orders of magnitude higher than that in source water. Lifetime cancer and non-cancer risks of DBPs stemming from swimming pool water were also estimated. Inhalation and dermal exposure were the most significant exposure routes related to swimming pool DBP cancer and non-cancer risks. For the first time, buccal and aural exposure were considered, and were proven to be important routes of DBP exposure (accounting for 17.9%-38.9% of total risk). The cancer risks of DBPs for all swimmers were higher than 10^-6 of lifetime exposure risk recommended by United States Environmental Protection Agency, and the competitive adult swimmers experienced the highest cancer risk (7.82 × 10^-5). These findings provide important information and perspectives for future efforts to lower the health risks associated with exposure to DBPs in swimming pool water.

Developmental toxicity of 2-bromoacetamide on peri- and early post-implantation mouse embryos in vitro

2-bromoacetamide (BAcAm), a new class of disinfection by-products (DBPs), is widely detected in drinking water across the world. Reports of the high cytogenetic toxicity of BAcAm have aroused public attention concerning its toxic effects on early embryonic development. In this study, we optimized an in vitro culture (IVC) system for peri- and early post-implantation mouse embryos and used this system to determine the developmental toxicity of BAcAm. We found that exposure to BAcAm caused a reduction in egg cylinder formation rate and abnormal lineage differentiation in a dose-dependent manner. Transcriptomic analysis further revealed that BAcAm exposure at early developmental stages altered the abundance of transcripts related to a variety of biological processes including gene expression, metabolism, cell proliferation, cell death and embryonic development, thus indicating its toxic effects on embryonic development. Thus, we developed a robust tool for studying the toxicology of chemicals at the early stages of embryonic development and demonstrated the developmental toxicity of BAcAm in the early embryonic development of mammals.

Within-day variation and health risk assessment of trihalomethanes (THMs) in a chlorinated indoor swimming pool in China

Trihalomethanes (THMs) are the most common species of disinfection by-products (DBPs) in swimming pools and have received widespread attention due to their risk to public health. However, studies examining within-day variation and the carcinogenic health risks from exposure to THMs in indoor swimming pools are limited. Our study aimed to detect the within-day variation of four THMs categories and carcinogenic health risk in indoor swimming pool water in Taiyuan, China, and to examine the correlations between THMs and environmental parameters. Our results showed chloroform (TCM) was the most abundant component in THMs with median concentrations from 0.038-0.118 μg/m³. TCM and THMs were significantly positively correlated with FCl and significantly negatively correlated with the cumulative number of swimmers (CNS) in the swimming pool. The concentration of total THMs and TCM, lifetime average daily doses (LADD) of TCM, and the total lifetime cancer risks (ELCR) values of THMs declined with time with the highest level occurring at 8:00 am. ELCR values of THMs were in the range of 1.368 × 10^-5-1.968 × 10^-5, which exceeded the negligible risk level (10^-6) defined by US EPA. Our results suggest that THM occurrence and the carcinogenic health risks in pool water varied temporally. Exposure to pool water THMs may pose a carcinogenic risk to human health, especially at the pool's opening time.

Occurrence and Cytotoxicity of Aliphatic and Aromatic Halogenated Disinfection Byproducts in Indoor Swimming Pool Water and Their Incoming Tap Water

Disinfection byproducts (DBPs) in swimming pool water are of wide concern for public health. In this study, the occurrence of five categories of aliphatic halogenated DBPs, i.e., trihalomethanes (THMs), haloacetic acids (HAAs), haloacetonitriles (HANs), halonitromethanes (HNMs), and haloketones (HKs), and six categories of aromatic halogenated DBPs, i.e., halophenols (HPs), halonitrophenols (HNPs), halohydroxy-benzaldehydes (HBALs), halohydroxybenzoic acids (HBAs), halobenzoquinones (HBQs), and haloanilines (HAs), was examined in seven indoor swimming pool water and their incoming tap water. The correlations between the DBP concentrations and water quality parameters were explored. Moreover, the cytotoxicity of the aliphatic and aromatic halogenated DBPs was tested with human hepatoma (HepG2) cells, and the concentration-cytotoxicity contributions of different DBP categories were calculated. The results demonstrate that 24 aliphatic (5 THMs, 8 HAAs, 5 HANs, 4 HNMs, and 2 HKs) and 50 aromatic halogenated DBPs (9 HPs, 8 HNPs, 9 HBALs, 8 HBAs, 11 HBQs, and 5 HAs) were present in the swimming pool water, among which 41 aromatic halogenated DBPs were detected in swimming pool water for the first time. The average concentrations of the five categories of aliphatic halogenated DBPs in the swimming pool water were in the order of HAAs > HANs > HKs > THMs > HNMs, while those in their incoming tap water were in the order of THMs > HAAs > HKs > HANs > HNMs. The average concentrations of the aromatic halogenated DBPs in the swimming pool water were significantly lower than those of the aliphatic halogenated DBPs, following the order of HBQs > HPs > HBAs > HBALs > HAs > HNPs, while those in their incoming tap water were in the order of HBALs > HBQs > HPs > HBAs > HAs > HNPs. The average concentration-cytotoxicity contributions of different DBP categories in the swimming pool water followed the order of HAAs > HANs > HNMs > HKs > HBQs > THMs > HPs > HNPs > HBAs > HBALs > HAs, with HAAs, HANs, and HNMs possessing the main concentration-cytotoxicity contributions (93.2% in total) among all DBP categories.

Occurrence of brominated disinfection by-products in thermal spas

Thermal spas are gaining more and more popularity among the population because they are used for recreational purposes. Disinfecting these baths without losing the health benefits poses a challenge for swimming pool operators. Previous studies have mainly focused on regulated chlorinated DBPs in freshwater pools with no bromide or seawater pools with very high bromide content. Thermal water pools have a low bromide content and in combination with chlorine can lead to chlorinated, brominated and mixed halogenated DBP species. The occurrence of brominated and mixed halogenated DBPs in these types of pools is largely unexplored, with very few or limited studies published on regulated DBPs and even fewer on emerging DBP classes. In the field of swimming pool water disinfection, apart from extensive studies in the field of drinking water disinfection, only a few studies are known in which >39 halogenated and 16 non-halogenated disinfection by-products, including regulated trihalomethanes (THM) and haloacetic acids (HAA), were investigated in swimming pool water. Calculated bromine incorporation factor (BIF) demonstrated that even small amounts of bromide in swimming pool water can lead to a large shift in DBP species towards brominated and mixed halogenated DBPs. Dihaloacetonitriles (DHANs) accounted for >50% of the calculated cytotoxicity and genotoxicity on average. Comparison of the target analysis with the TOX showed that a major part of the measured TOX (69% on average) could be explained by the regulated classes THMs, HAAs, and the unregulated class of HANs. This study aims to help operators of swimming pools with bromide-containing water to gain a better understanding of DBP formation in future monitoring and to fill the knowledge gap that has existed so far on the occurrence of DBPs in thermal water pools.

Do DBPs swim in salt water pools? Comparison of 60 DBPs formed by electrochemically generated chlorine vs. conventional chlorine

Disinfectants are added to swimming pools to kill harmful pathogens. Although liquid chlorine (sodium hypochlorite) is the most commonly used disinfectant, alternative disinfection techniques like electrochemically generated mixed oxidants or electrochemically generated chlorine, often referred to as salt water pools, are growing in popularity. However, these disinfectants react with natural organic matter and anthropogenic contaminants introduced to the pool water by swimmers to form disinfection byproducts (DBPs). DBPs have been linked to several adverse health effects, such as bladder cancer, adverse birth outcomes, and asthma. In this study, we quantified 60 DBPs using gas chromatography-mass spectrometry and assessed the calculated cytotoxicity and genotoxicity of an indoor community swimming pool before and after switching to a salt water pool with electrochemically generated chlorine. Interestingly, the total DBPs increased by 15% upon implementation of the salt water pool, but the calculated cytotoxicity and genotoxicity decreased by 45% and 15%, respectively. Predominant DBP classes formed were haloacetic acids, with trichloroacetic acid and dichloroacetic acid contributing 57% of the average total DBPs formed. Haloacetonitriles, haloacetic acids, and haloacetaldehydes were the primary drivers of calculated cytotoxicity, and haloacetic acids were the primary driver of calculated genotoxicity. Diiodoacetic acid, a highly toxic iodinated DBP, is reported for the first time in swimming pool water. Bromide impurities in sodium chloride used to electrochemically generate chlorine led to a 73% increase in brominated DBPs, primarily driven by bromochloroacetic acid. This study presents the most extensive DBP study to-date for salt water pools.

Associations of Urinary Trichloroacetic Acid Concentrations with Spermatozoa Apoptosis and DNA Damage in a Chinese Population

Exposure to trichloroacetic acid (TCAA) has been associated with impaired semen quality; however, its association with spermatozoa apoptosis and DNA damage remains unclear. We, therefore, collected single semen and repeated urine samples from male partners of couples attending a reproductive center, which were measured for spermatozoa apoptosis and DNA damage parameters and TCAA concentrations, respectively. Multivariable linear regression models were used to explore the associations between urinary TCAA concentrations and spermatozoa apoptosis (n = 462) and DNA damage parameters (n = 512). After adjusting for potential confounders, positive dose-response relationships were found between urinary TCAA concentrations and percentage of tail DNA (tail%) and tail-distributed moment (TDM) (both p for trend <0.10). Compared with men in the lowest tertile of urinary TCAA concentrations, men in the highest tertile had a greater tail% and TDM of 6.2% (95% CI: 0.7, 12.2%) and 8.9% (95% CI: -1.9, 20.5%), respectively. Urinary TCAA concentrations were unrelated to spermatozoa apoptosis parameters in a dose-response manner. However, urinary TCAA concentrations were positively associated with the percentage of Annexin V⁺/PI^- spermatozoa (apoptotic cells), when urinary TCAA concentrations were modeled as continuous variables. Our results suggest that exposure to TCAA at concentrations in real-world scenarios may be associated with spermatozoa apoptosis and DNA damage.

Occurrence of Disinfection By-Products in Swimming Pools in the Area of Thessaloniki, Northern Greece. Assessment of Multi-Pathway Exposure and Risk

This study investigated the occurrence of disinfection by-products (DBPs) (trihalomethanes (THMs), haloacetic acids (HAAs), halonitriles (HANs), halonitromethane (TCNM) and haloketones (HKs)) in different type of swimming pools in the area of Thessaloniki, northern Greece by employing the EPA methods 551.1 and 552.3. Moreover, general water quality parameters (pH, residual chlorine, dissolved organic carbon, UV₂₅₄ absorption, total nitrogen, alkalinity and conductivity) were also measured. The concentrations of DBPs showed great variability among swimming pools as well as within the same pool between sampling campaigns. HAAs exhibited the highest concentrations followed by THMs, HANs, TCNM and HKs. Exposure doses for four age groups (3–<6 y, 6–<11 y, 11–<16 y and adults) were calculated. Route-specific exposures varied among DBPs groups. Inhalation was the dominant exposure route to THMs and TCNM (up to 92–95%). Ingestion and dermal absorption were the main exposure routes to HAAs (40–82% and 18–59%, respectively), depending on the age of swimmers. HANs contributed up to 75% to the calculated cytotoxicity of pool water. Hazard indices for different exposure routes were <1, suggesting non-carcinogenic risk. Inhalation posed the higher carcinogenic risk for THMs, whereas risk via oral and dermal routes was low. Ingestion and dermal contact posed the higher risk for HAAs. Risk management strategies that minimise DBPs exposure without compromising disinfection efficiency in swimming pools are necessary.

Disinfection Byproduct Recovery during Extraction and Concentration in Preparation for Chemical Analyses or Toxicity Assays

Over 700 disinfection byproducts (DBPs) have been identified, but they account for only ∼30% of total organic halogen (TOX). Extracting disinfected water is necessary to assess the overall toxicity of both known and unknown DBPs. Commonly used DBP extraction methods include liquid-liquid extraction (LLE) and solid-phase extraction (SPE), which may use either XAD resins or other polymeric sorbents. With few exceptions, DBP recoveries have not been quantified. We compared recoveries by LLE, XAD resins, and a mixture of Phenomenex Sepra SPE sorbents (hereafter SPE) for (semi-)volatile DBPs and nonvolatile model compounds at the 1-L scale. We scaled up the three methods to extract DBPs in 10 L of chlorinated creek waters. For (semi-)volatile DBPs, XAD resulted in lower recoveries than LLE and SPE at both 1- and 10-L scales. At the 10-L scale, recovery of certain trihalomethanes and trihalogenated haloacetic acids by XAD was negligible, while recovery of other (semi-)volatile DBPs extracted by XAD (<30%) was lower than by SPE or LLE (30-60%). TOX recovery at the 10-L scale was generally similar by the three extraction methods. The low TOX recovery (<30%) indicates that the toxicity assessed by bioassays predominantly reflects the contribution of the nonvolatile, hydrophobic fraction of DBPs.

Pool water disinfection by ozone-bromine treatment: Assessing the disinfectant efficacy and the occurrence and in vitro toxicity of brominated disinfection by-products

Pool water is continuously circulated and reused after an extensive treatment including disinfection by chlorination, ozonation or UV treatment. In Germany, these methods are regulated by DIN standard 19643. Recently, the DIN standard has been extended by a new disinfection method using hypobromous acid as disinfectant formed by introducing ozone into water with naturally or artificially high bromide content during water treatment. In this study, we tested the disinfection efficacy of the ozone-bromine treatment in comparison to hypochlorous acid in a flow-through test rig using the bacterial indicator strains Escherichia coli, Enterococcus faecium, Pseudomonas aeruginosa, and Staphylococcus aureus and the viral indicators phage MS2 and phage PRD1. Furthermore, the formation of disinfection by-products and their potential toxic effects were investigated in eight pool water samples using different disinfection methods including the ozone-bromine treatment. Our results show that the efficacy of hypobromous acid, depending on its concentration and the tested organism, is comparable to that of hypochlorous acid. Hypobromous acid was effective against five of six tested indicator organisms. However, using Pseudomonas aeruginosa and drinking water as test water, both tested disinfectants (0.6 mg L^-1 as Cl₂ hypobromous acid as well as 0.3 mg L^-1 as Cl₂ hypochlorous acid) did not achieve a reduction of four log₁₀ levels within 30 s, as required by DIN 19643. The formation of brominated disinfection by-products depends primarily on the bromide concentration of the filling water, with the treatment method having a smaller effect. The eight pool water samples did not show critical values in vitro for acute cytotoxicity or genotoxicity in the applied assays. In real pool water samples, the acute toxicological potential was not higher than for conventional disinfection methods. However, for a final assessment of toxicity, all single substance toxicities of known DBPs present in pool water treated by the ozone-bromine treatment have to be analyzed additionally.

Terrestrial dissolved organic matter source affects disinfection by-product formation during water treatment and subsequent toxicity

Restoring woody vegetation to riparian zones helps to protect waterways from excessive sediment and nutrient inputs. However, the associated leaf litter can be a major source of dissolved organic matter (DOM) leached into surface waters. DOM can lead to the formation of disinfection by-products (DBPs) during drinking water treatment. This study investigated the DBPs formed during chlorination of DOM leached from leaf litter and assessed the potential toxicity of DBPs generated. We compared the leachate of two native Australian riparian trees, Casuarina cunninghamiana and Eucalyptus tereticornis, and a reservoir water source from a catchment dominated by Eucalyptus species. Leachates were diluted to dissolved organic carbon concentrations equivalent to the reservoir (~9 mg L^-1). E. tereticornis leachates produced more trihalomethanes (THMs), haloacetic acids (HAAs), and haloketones after chlorination, while C. cunninghamiana produced more chloral hydrate and haloacetonitriles. Leachate from both species produced less THMs and more HAAs per mole of carbon than reservoir water. This may be because reservoir water had more aromatic, humic characteristics while leaf leachates had relatively more protein-like components. Using in vitro bioassays to test the mixture effects of all chemicals, chlorinated E. tereticornis leachate induced oxidative stress in HepG2 liver cells and bacterial toxicity more frequently and at lower concentrations than C. cunninghamiana and reservoir water. Overall, this study has shown that the DOM leached from litter of these species has the potential to generate DBPs and each species has a unique DBP profile with differing bioassay responses. E. tereticornis may pose a relatively greater risk to drinking water than C. cunninghamiana as it showed greater toxicity in bioassays. This implies tree species should be considered when planning riparian zones to ensure the benefits of vegetation to waterways are not offset by unintended increased DBP production and associated toxicity following chlorination at downstream drinking water intakes.

The Occurrence of N-nitrosodimethylamine (NDMA) in Swimming Pools: An Overview

The occurrence of several disinfectant byproducts has been investigated in swimming pools. Until now, there are only a few studies on nitrosamine, particularly N-nitrosodimethylamine in swimming pool water. This could be due to the lack of a suitable method that is sensitive enough for the measurement of N-nitrosodimethylamine in pool waters. Other disinfectant byproducts formed in pool water widely documented are trihalomethanes, haloacetic acids, halonitromethanes, and chloramines but inadequate information on N-nitrosodimethylamine. This paper provides a review of the nitrogenous disinfectant byproduct in swimming pools and its health implications. Anthropogenic substances introduced by swimmers such as sweat, lotions, and urine contribute to the formation of N-nitrosodimethylamine. The reaction of secondary amines such as dimethylamine with mono/dichloroamines produced dimethyl hydrazine and further undergo oxidation to form N-nitrosodimethylamine. The reaction of chlorine and other disinfectants with these anthropogenic sources in swimming pools cause cancer and asthma in human tissues. Thus, the assessment of N-nitrosodimethylamine in the swimming pool is less well documented. Therefore, the health consequences, mutagenic, and genotoxic potentials of N-nitrosodimethylamine should be the focus of more research studies.

Stable dechlorination of Trichloroacetic Acid (TCAA) to acetic acid catalyzed by palladium nanoparticles deposited on H2-transfer membranes

Trichloroacetic acid (TCAA) is a common disinfection byproduct (DBP) produced during chlorine disinfection. With the outbreak of the Coronavirus Disease 2019 (COVID-19) pandemic, the use of chlorine disinfection has increased, raising the already substantial risks of DBP exposure. While a number of methods are able to remove TCAA, their application for continuous treatment is limited due to their complexity and expensive or hazardous inputs. We investigated a novel system that employs palladium (Pd⁰) nanoparticles (PdNPs) for catalytic reductive dechlorination of TCAA. H₂ was delivered directly to PdNPs in situ coated on the surface of bubble-free hollow-fiber gas-transfer membranes. The H₂-based membrane Pd film reactor (H₂-MPfR) achieved a high catalyst-specific TCAA reduction rate, 32 L/g-Pd/min, a value similar to the rate of using homogeneously suspended PdNP, but orders of magnitude higher than with other immobilized PdNP systems. In batch tests, over 99% removal of 1 mM TCAA was achieved in 180 min with strong product selectivity (≥ 93%) to acetic acid. During 50 days of continuous operation, over 99% of 1 mg/L influent TCAA was removed, again with acetic acid as the major product (≥ 94%). We identified the reaction pathways and their kinetics for TCAA reductive dechlorination with PdNPs using direct delivery of H₂. Sustained continuous TCAA removal, high selectivity to acetic acid, and minimal loss of PdNPs support that the H₂-MPfR is a promising catalytic reactor to remove chlorinated DBPs in practice.

Making Swimming Pools Safer: Does Copper-Silver Ionization with Chlorine Lower the Toxicity and Disinfection Byproduct Formation?

Swimming pools are commonly treated with chlorine, which reacts with the natural organic matter and organic matter introduced by swimmers and form disinfection byproducts (DBPs) that are associated with respiratory-related issues, including asthma, in avid swimmers. We investigated a complementary disinfectant to chlorine, copper-silver ionization (CSI), with the aim of lowering the amount of chlorine used in pools and limiting health risks from DBPs. We sampled an indoor and outdoor pool treated with CSI-chlorine during the swimming season in 2017-2018 and measured 71 DBPs, speciated total organic halogen, in vitro mammalian cell cytotoxicity, and N-acetyl-l-cysteine (NAC) thiol reactivity as a cytotoxicity predictor. Controlled, simulated swimming pools were also investigated. Emerging DBP concentrations decreased by as much as 80% and cytotoxicity decreased as much as 70% in the indoor pool when a lower chlorine residual (1.0 mg/L) and CSI was used. Some DBPs were quantified for the first time in pools, including chloroacetaldehyde (up to 10.6 μg/L), the most cytotoxic haloacetaldehyde studied to date and a major driver of the measured cytotoxicity in this study. Three highly toxic iodinated haloacetic acids (iodoacetic acid, bromoiodoacetic acid, and chloroiodoacetic acid) were also quantified in pools for the first time. We also found that the NAC thiol reactivity was significantly correlated to cytotoxicity, which could be useful for predicting the cytotoxicity of swimming pool waters in future studies.

Unraveling the chemodiversity of halogenated disinfection by-products formed during drinking water treatment using target and non-target screening tools

To date, there is no analytical approach available that allows the full identification and characterization of highly complex disinfection by-product (DBP) mixtures. This study aimed at investigating the chemodiversity of drinking water halogenated DBPs using diverse analytical tools: measurement of adsorbable organic halogen (AOX) and mass spectrometry (MS)-based target and non-target analytical workflows. Water was sampled before and after chemical disinfection (chlorine or chloramine) at four drinking water treatment plants in Sweden. The target analysis had the highest sensitivity, although it could only partially explain the AOX formed in the disinfected waters. Non-target Fourier transform ion cyclotron resonance (FT-ICR) MS analysis indicated that only up to 19 Cl and/or Br-CHO formulae were common to all disinfected waters. Unexpectedly, a high diversity of halogenated DBPs (presumed halogenated polyphenolic and highly unsaturated compounds) was found in chloraminated surface water, comparable to that found in chlorinated surface water. Overall, up to 86 DBPs (including isobaric species) were tentatively identified using liquid chromatography (LC)-Orbitrap MS. Although further work is needed to confirm their identity and assess their relevance in terms of toxicity, they can be used to design suspect lists to improve the characterization of disinfected water halogenated mixtures.

Disinfection by-products in drinking water: Occurrence, toxicity and abatement

Disinfection means the killing of pathogenic organisms (e.g. bacteria and its spores, viruses, protozoa and their cysts, worms, and larvae) present in water to make it potable for other domestic works. The substances used in the disinfection of water are known as disinfectants. At municipal level, chlorine (Cl₂), chloramines (NH₂Cl, NHCl₂), chlorine dioxide (ClO₂), ozone (O₃) and ultraviolet (UV) radiations, are the most commonly used disinfectants. Chlorination, because of its removal efficiency and cost effectiveness, has been widely used as method of disinfection of water. But, disinfection process may add several kinds of disinfection by-products (DBPs) (∼600-700 in numbers) in the treated water such as Trihalomethanes (THM), Haloacetic acids (HAA) etc. which are detrimental to the human beings in terms of cytotoxicity, mutagenicity, teratogenicity and carcinogenicity. In water, THMs and HAAs were observed in the range from 0.138 to 458 μg/L and 0.16-136 μg/L, respectively. Thus, several regulations have been specified by world authorities like WHO, USEPA and Bureau of Indian Standard to protect human health. Some techniques have also been developed to remove the DBPs as well as their precursors from the water. The popular techniques of DBPs removals are adsorption, advance oxidation process, coagulation, membrane based filtration, combined approaches etc. The efficiency of adsorption technique was found up to 90% for DBP removal from the water.

Analysis of the Kinetics of Swimming Pool Water Reaction in Analytical Device Reproducing Its Circulation on a Small Scale

The most common cause of diseases in swimming pools is the lack of sanitary control of water quality; water may contain microbiological and chemical contaminants. Among the people most at risk of infection are children, pregnant women, and immunocompromised people. The origin of the problem is a need to develop a system that can predict the formation of chlorine water disinfection by-products, such as trihalomethanes (THMs). THMs are volatile organic compounds from the group of alkyl halides, carcinogenic, mutagenic, teratogenic, and bioaccumulating. Long-term exposure, even to low concentrations of THM in water and air, may result in damage to the liver, kidneys, thyroid gland, or nervous system. This article focuses on analysis of the kinetics of swimming pool water reaction in analytical device reproducing its circulation on a small scale. The designed and constructed analytical device is based on the SIMATIC S7-1200 PLC driver of SIEMENS Company. The HMI KPT panel of SIEMENS Company enables monitoring the process and control individual elements of device. Value of the reaction rate constant of free chlorine decomposition gives us qualitative information about water quality, it is also strictly connected to the kinetics of the reaction. Based on the experiment results, the value of reaction rate constant was determined as a linear change of the natural logarithm of free chlorine concentration over time. The experimental value of activation energy based on the directional coefficient is equal to 76.0 [kJ×mol−1]. These results indicate that changing water temperature does not cause any changes in the reaction rate, while it still affects the value of the reaction rate constant. Using the analytical device, it is possible to constantly monitor the values of reaction rate constant and activation energy, which can be used to develop a new way to assess pool water quality.

Characterization of organic matter by HRMS in surface waters: Effects of chlorination on molecular fingerprints and correlation with DBP formation potential

In order to understand and minimize the formation of halogenated disinfection by-products (DBPs), it is important to investigate how dissolved organic matter (DOM) contributes to their generation. In the present study, we analysed the DOM profile of water samples from the Barcelona catchment area by high resolution mass spectrometry (HRMS) and we studied the changes after chlorination. Chlorination produced significant changes in the DOM, decreased the average m/z and Kendrick mass defect (KMD) of their spectra and decreased the number and abundance of lignin-like features. The Van Krevelen (VK) fingerprint exhibited several noticeable changes, including the appearance of highly oxidized peaks in the tannin-like region (average O/C, 0.78 ± 0.08), the appearance of features with low H/C and the disappearance of more than half of the lipids-like features. Up to 657 halogenated peaks were generated during sample chlorination, most of which in the condensed hydrocarbons-like and the lignin-like region of the VK diagram. Around 200 features were found to be strongly correlated (ρ ≥ 0.795) to the formation potential of trihalomethanes (THMs) and 5 were correlated with the formation potential of haloacetonitrile (HANs). They all were plotted in the lignin fraction of the VK diagram, but both groups of features exhibited different nitrogen content: those features related to HANs FP had at least one nitrogen atoms in their structures, whilst those related to THMs did not.

Health risks and predictive modeling of disinfection byproducts in swimming pools

Disinfection is an indispensable water treatment process used to inactivate pathogens and prevent outbreaks of infectious diseases in swimming pools. However, toxic disinfection byproducts (DBPs) are inevitably formed during the process. To improve the supervision and regulation of DBPs in swimming pools, the reliability of using trihalomethanes (THMs) as the sole indicator of organic DBPs and the possibility of using easily detectable water quality parameters as predictors of DBPs were discussed based on the occurrence of 29 typical DBPs in swimming pools. Among the target DBP categories, THMs and haloacetic acids (HAAs) were the prominent species, and the concentrations of HAAs were the highest. The risk assessment results indicated that the total risk values in most pools were higher than the acceptable value (10^-6). Compared with nitrosamines and THMs, HAAs were the main contributors to the cancer risks posed by dermal absorption and ingestion. THMs (r = 0.619; p < 0.01) and HAAs (r = 0.989; p < 0.01) were both significantly correlated with total DBPs (the sum of 29 DBPs). A stepwise multivariate regression model was developed by analyzing the correlations between total DBPs and water quality parameters, and the relationship coefficient R² was 0.756. This study provides important information and perspectives for the improvement and implementation of standards for swimming pool water.

Assessing Additivity of Cytotoxicity Associated with Disinfection Byproducts in Potable Reuse and Conventional Drinking Waters

Recent studies used the sum of the measured concentrations of individual disinfection byproducts (DBPs) weighted by their Chinese hamster ovary (CHO) cell cytotoxicity LC₅₀ values to estimate the DBP-associated cytotoxicity of disinfected waters. This approach assumed that cytotoxicity was additive rather than synergistic or antagonistic. In this study, we evaluated whether this assumption was valid for mixtures containing DBPs at the concentration ratios measured in authentic disinfected waters. We examined the CHO cell cytotoxicity of defined DBP mixtures based on the concentrations of 43 regulated and unregulated DBPs measured in eight drinking and potable reuse waters. The hypothesis for additivity was supported using three experimental approaches. First, we demonstrated that the calculated additive toxicity (CAT) and bioassay-based calculated additive toxicity (BCAT) of the DBP mixtures agree within 12% on a median basis. We also found an additive toxicity response (CAT ≈ BCAT) between the regulated and unregulated DBP classes. Finally, the empirical biological cytotoxicity of the DBP subset mixtures, independent of the calculated toxicity, was additive. These results support the validity of using the sum of cytotoxic potency-weighted DBP concentrations as an estimate of the CHO cell cytotoxicity associated with known DBPs in real disinfected waters.

Precise exposure assessment revealed the cancer risk and disease burden caused by trihalomethanes and haloacetic acids in Shanghai indoor swimming pool water

Swimming pool disinfection byproducts (DBPs) are becoming increasingly common worldwide. Precise exposure and health risk assessment for DBPs in swimming pool water with optimized parameters for local and specific population is more urgently needed. This study aimed to determine the levels of trihalomethanes (THMs) and haloacetic acids (HAAs) in 16 public indoor swimming pools in Shanghai, China. Swimming habits were also investigated to obtain more accurate exposure assessment parameters. Precise exposure assessment through multiple pathways, resulting cancer risk, and disability-adjusted life years (DALYs) were assessed. Results indicated that the highest total level of THMs and HAAs occurred in autumn. The surveyed swimmers 9-17 years of age had higher average daily dose (ADD) of DBPs than swimmers ≥18 years of age. The total lifetime cancer risk (LCR) attributable to THMs and HAAs exceeded 10^-6, which represents a negligible risk level (NRL). The cancer risk from inhalation exposure predominantly by THMs contributed more than 99% of the total risk. Annual disease burden was 19.0 person-years attributed to exposure of DBPs in swimming pool water in Shanghai. This study provides a paradigm and strategic reference of precise exposure assessments, risk assessments, and disease burden estimation of hazards in swimming pool water for other regions.

+Chlorination by-products in indoor swimming pools: Development of a pilot pool unit and impact of operating parameters

Chlorine addition in swimming pools ensures the microbiological quality of the water and the bathers' safety. However, water chlorination is associated with disinfection byproducts (DBP) formation and adverse health effects. The impact of operating parameters and innovative water treatment systems on DBPs levels has been reported in several studies, but sampling campaign in real pools remain difficult to carry out, mainly due to unexpected attendance variations. This study presents the development of a pilot pool plant allowing to perform experiments under controlled and reproducible conditions. Bathers inputs were simulated both for the organic load and for the mechanical agitation of water. Two sampling campaigns were performed during the building of the pilot, before and after the hall was closed. Key operating parameters such as chlorine dose, water temperature and attendance were controlled and monitored. DBP levels in the pilot plant were representative of French indoor swimming pools and the impact of bathers' activity was visible on volatile DBPs. Furthermore, correlations could be stated between operating parameters and DBP levels. Stripping effectively reduced volatile DBP concentrations in water. Moreover, energy consumption data, which are usually very scarce in experimental studies, showed the influence of heat pump consumption on the global energy consumption.

In vitro toxicity and molecular interacting mechanisms of chloroacetic acid to catalase

Chloroacetic acid (CAA), one of typical disinfection by-products (DBPs), has attracted considerable concerns for its biological safety. Antioxidant enzyme catalase (CAT) plays a crucial part in the regulation of redox state balance. Herein, CAA was used to test its adverse effects on CAT and explore the underlying mechanism. The cell viability of mouse primary hepatocytes decreased under CAA exposure. A bell-shaped response to CAA exposure was observed in intracellular CAT activity, whose change was partly influenced by molecular CAT activity. CAA binds to CAT mainly via van der Waals forces and hydrogen bonds with a stoichiometry of 9.2. The binding caused structural changes in CAT with the unfolding of polypeptide chains and the decrease of α-helical content. CAA interacts with the amino acid residues surrounding the active sites and substrate channel of CAT. These interactions result in the decrease of molecular CAT activity, which could be restored by high ionic strength. This study has provided a combined molecular and cellular tactics for studying the adverse effects of DBPs on biomarkers and the underlying mechanisms.

Identification of novel disinfection byproducts in pool water: Chlorination of the algaecide benzalkonium chloride

The maintenance of public swimming pools requires numerous technological steps. One of the most important issues involves microbiological safety. Benzalkonium chloride (BAC) encompasses homologous alkylbenzyldimethylammonium chlorides with various alkyl chains, in particular C12 and C14, and is known as a popular algaecide for keeping water clean. In addition to BAC, NaOCl and UV-irradiation are also used to treat pool water as additional technological steps. Therefore, BAC itself can become a precursor of disinfection byproducts (DBPs). High-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS), with accurate mass measurements, has allowed the discovery of several groups of DBPs that are related to BAC in public pool water in Arkhangelsk (Russia). These DBPs include numerous isomeric monochlorinated derivatives ([C₂₁H₃₇ClN]⁺ and [C₂₃H₄₁ClN]⁺), hydroxyl derivatives ([C₂₁H₃₈NO]⁺ and [C₂₃H₄₂NO]), carbonyl ([C₂₁H₃₆NO]⁺ and [C₂₃H₄₀NO]⁺), and dicarbonyl derivatives ([C₂₁H₃₄NO₂]⁺ and [C₂₃H₃₈NO₂]⁺). In addition, chlorinated alcohols, ketones and ketoalcohols of BAC were also detected, including [C₂₁H₃₅ClNO]⁺, [C₂₁H₃₇ClNO]⁺ and [C₂₁H₃₅ClNO₂]⁺ for BAC-12; and [C₂₃H₃₉ClNO]⁺, [C₂₃H₄₁ClNO]⁺ and [C₂₃H₃₉ClNO₂]⁺ for BAC-14. MS/MS allowed reliable elucidation of the structures of novel DBPs, proving that chlorination starts via radical substitution in the long aliphatic chains of BAC. UV-irradiation dramatically accelerates the reaction completely destroying the original compounds in less than an hour, while the array of the intermediate products remains the same as in the dark. The formation of other DBPs proceeds due to further reactions of these primary products. The concentrations of novel DBPs in pool water reach μg L^-1 levels. These conclusions were proved by conducting model reactions of BAC with NaOCl.

500 days of swimmers: the chemical water quality of swimming pool waters from the beginning

Many studies of disinfection by-products (DBPs) in pools have focused on haloacetic acids, trihalomethanes, and chloramines, with less studies investigating the occurrence of other DBPs, such as haloketones, haloacetaldehydes, haloacetonitriles, halonitromethanes, and haloacetamides. Furthermore, while many studies have achieved a broadscreen analysis across several pools, fewer studies have followed the water quality of pools over time, with information regarding the production and fate of DBPs in pools over extended periods (e.g. > 1 year) being limited. This study reports the occurrence of 39 DBPs and several general water quality parameters in two newly built and filled swimming pools over 15 months, where investigations began prior to opening. DBP concentrations measured in this study were generally similar to or higher than those previously reported in chlorinated pools, with concentrations of chloroacetic acid, dichloroacetic acid, trichloroacetic acid, and chloral hydrate (trichloroacetaldehyde) in some samples being higher than previously reported maximum concentrations. Considering both pools, lower concentrations of DBPs were measured in the pool where a steady state non-purgeable organic carbon concentration was achieved, highlighting the importance of the establishment of a steady state balance of mineralisation versus addition of organic carbon to reduce precursors for DBP formation in pools. Pools were found to exhibit significantly higher estimated cytotoxicity than their filling water, which reflects the significantly higher concentrations of DBPs measured in the pools in comparison to the filling water. Chloral hydrate accounted for up to 99% the total estimated cytotoxicity and was found to be correlated to the number of pool entries, suggesting that swimmers may be a potential source of chloral hydrate precursors in pools. The presence and subsequent peak of non-purgeable organic carbon and DBPs prior to, and soon after, opening suggest that the building process and/or new pool infrastructure may have had a significant impact on the chemical water quality, particularly on DBP formation. This study includes the first quantification of bromochloroacetaldehyde, bromodichloroacetaldehyde, bromochloronitromethane, and dichloronitromethane in chlorinated swimming pools, and provides important new knowledge on the long-term trends of DBPs in pools.

Assessing the role of different dissolved organic carbon and bromide concentrations for disinfection by-product formation using chemical analysis and bioanalysis

Concerns regarding disinfection by-product (DBP) formation during drinking water treatment have led water utilities to apply treatment processes to reduce the concentration of DBP precursor natural organic matter (NOM). However, these processes often do not remove bromide, leading to high bromide to dissolved organic carbon (DOC) ratios after treatment, which can increase the formation of more toxic brominated DBPs. In the current study, we investigated the formation and effect of DBPs in a matrix of synthetic water samples containing different concentrations of bromide and DOC after disinfection with chlorine. Trihalomethanes and haloacetic acids were analysed by chemical analysis, while effect was evaluated using in vitro bioassays indicative of the oxidative stress response and bacterial toxicity. While the addition of increasing bromide concentrations did not alter the sum molar concentration of DBPs formed, the speciation changed, with greater bromine incorporation with an increasing Br:DOC ratio. However, the observed effect did not correlate with the Br:DOC ratio, but instead, effect increased with increasing DOC concentration. Water samples with low DOC and high bromide did not exceed the available oxidative stress response effect-based trigger value (EBT), while all samples with high DOC, irrespective of the bromide concentration, exceeded the EBT. This suggests that treatment processes that remove NOM can improve drinking water quality, even if they are unable to remove bromide. Further, iceberg modelling showed that detected DBPs only explained a small fraction of the oxidative stress response, supporting the application of both chemical analysis and bioanalysis for monitoring DBP formation.

Occurrence of disinfection by-products in swimming pools and the estimated resulting cytotoxicity

Swimming pools are disinfected to protect against the risk of microbial disease, however, the formation of disinfection by-products (DBPs) is an unwanted consequence. While many studies have reported the occurrence of commonly investigated DBPs (trihalomethanes and haloacetic acids) in pools, few studies have investigated emerging DBP classes, such as the haloketones or haloacetaldehydes, and the nitrogenous haloacetamides, halonitromethanes, haloacetonitriles and N-nitrosamines. This study investigated the occurrence of sixty four DBPs from the eight aforementioned DBP classes in pools employing different treatment methods. Approximately 70% of the DBPs were detected in at least one of the pools, with most concentrations being equal to or greater than those previously reported. Chloral hydrate (trichloroacetaldehyde) was one of many DBPs detected in all chlorinated waters (202 to 1313 μg/L), and, on a molar basis, was the predominant DBP. Several other DBPs, namely chloroacetic acid, dichloroacetic acid, trichloroacetic acid, dichloroacetamide, dibromoacetamide, dibromochloroacetamide and trichloroacetamide, and many of the N-nitrosamines, were measured at concentrations greater than previously reported: up to 200 to 479 μg/L for the haloacetic acids, 56 to 736 μg/L for the haloacetamides and up to 1093 ng/L for some N-nitrosamines. The higher disinfectant residuals required to be employed in Australian pools, and poor pool management (e.g. of chlorine residual and pH) are likely factors contributing to these relatively high DBP concentrations. Where possible, the cytotoxicity values of the investigated DBPs were evaluated, with chloral hydrate representing over 90% of the total chronic cytotoxicity despite only representing up to 64% of the total molar DBP concentration. This study is the first report of bromodichloroacetaldehyde and bromochloroacetaldehyde in pools and is the first investigation of N-nitrosamines in a brominated pool. Furthermore, this work aids in understanding DBPs in both chlorine and bromine treated pools, the latter being the subject of only limited previous studies.

An analytical method for the analysis of trihalomethanes in ambient air using solid-phase microextraction gas chromatography-mass spectrometry: An application to indoor swimming pool complexes

A simple method for the collection and analysis of the four brominated and chlorinated trihalomethanes (THMs) in air samples is described. Ambient air samples were collected in pre-prepared glass vials, with THM analysis performed using solid-phase microextraction gas chromatography-mass spectrometry, where the need for chemical reagents is minimized. Analytical parameters, including oven temperature program, solvent volume, incubation time, vial agitation, extraction time and temperature, as well as desorption time and temperature, were evaluated to ensure optimal method performance. The developed method allows for point-in-time quantification (compared to an average concentration measured over extended periods of time), with detection limits between 0.7 to 2.6 µg/m³ . Excellent linearity (r²  > 0.99), repeatability (3% to 11% RSD), and reproducibility (3% to 16% RSD) were demonstrated over a concentration range from 2 to 5000 µg/m³ . The method was validated for the analysis of THMs in indoor swimming pool air and was used to investigate the occurrence of THMs in the air above 15 indoor swimming pools. This is the first study to report the occurrence of THMs in swimming pool air in Australia, and concentrations higher than those previously reported in other countries were measured.

Application of UVOX Redox® for swimming pool water treatment: Microbial inactivation, disinfection byproduct formation and micropollutant removal

Alternative disinfection technologies may overcome some of the limitations of conventional treatment applied in swimming pools: chlorine-resistant pathogens (e.g. Cryptosporidium oocysts and Giardia cysts) and the formation of chlorinated disinfection byproducts. In this paper, results of full scale validation of an alternative disinfection technology UVOX Redox^® (hereinafter referred to as UVOX) that combines ozonation and UV irradiation are presented. The performance was assessed in terms of microbial inactivation, disinfection byproduct formation and micropollutant removal. UVOX was able to achieve 1.4-2.7 log inactivation of Bacillus subtilis spores at water flows between 20 and 76 m³/h. Lower formation of trichloromethane and dichloroacetic acid was observed with UVOX followed by chlorination when compared to chlorination alone. However, due to the use of ozone and the presence of bromide in the pool water, the formation of trihalomethanes and haloacetic acids shifted to more brominated byproducts. Chlorine alone was able to remove the target micropollutants: acetaminophen, atenolol, caffeine, carbamazepine, estrone, estradiol, and venlafaxine (>97% removal) after 24 h, with the exception of ibuprofen (60% removal). The application of UVOX in chlorinated water enhanced the removal of ibuprofen. The application of UVOX could lower the usage of chlorine to the level that provides an adequate residual disinfection effect.

An exploration of disinfection by-products formation and governing factors in chlorinated swimming pool water

This paper investigates disinfection by-products (DBPs) formation and their relationship with governing factors in chlorinated swimming pools. The study compares concentrations of DBPs with WHO guidelines for drinking water quality recommended to screen swimming pool water quality. The statistical analysis is based on a global database of 188 swimming pools accumulated from 42 peer-reviewed journal publications from 16 countries. The mean and standard deviation of dichloroacetic acid and trichloroacetic acid were estimated as 282 ± 437 and 326 ± 517 μg L^-1, respectively, which most often surpassed the WHO guidelines. Similarly, more than half of the examined pools had higher values of chloral hydrate (102 ± 128 μg L^-1). The concentration of total chloramines (650 ± 490 μg L^-1) was well above the WHO guidelines in all reported cases. Nevertheless, the reported values remained below the guidelines for most of the studied pools in the case of total trihalomethanes (134 ± 160 μg L^-1), dichloroacetonitrile (12 ± 12 μg L^-1) and dibromoacetonitrile (8 ± 11 μg L^-1). Total organic carbon, free residual chlorine, temperature, pH, total nitrogen and bromide ions play a pivotal role in DBPs formation processes. Therefore, proper management of these governing factors could significantly reduce DBPs formation, thereby, contributing towards a healthy swimming pool environment.

Regulation, formation, exposure, and treatment of disinfection by-products (DBPs) in swimming pool waters: A critical review

The microbial safety of swimming pool waters (SPWs) becomes increasingly important with the popularity of swimming activities. Disinfection aiming at killing microbes in SPWs produces disinfection by-products (DBPs), which has attracted considerable public attentions due to their high frequency of occurrence, considerable concentrations and potent toxicity. We reviewed the latest research progress within the last four decades on the regulation, formation, exposure, and treatment of DBPs in the context of SPWs. This paper specifically discussed DBP regulations in different regions, formation mechanisms related with disinfectants, precursors and other various conditions, human exposure assessment reflected by biomarkers or epidemiological evidence, and the control and treatment of DBPs. Compared to drinking water with natural organic matter as the main organic precursor of DBPs, the additional human inputs (i.e., body fluids and personal care products) to SPWs make the water matrix more complicated and lead to the formation of more types and greater concentrations of DBPs. Dermal absorption and inhalation are two main exposure pathways for trihalomethanes while ingestion for haloacetic acids, reflected by DBP occurrence in human matrices including exhaled air, urine, blood, and plasma. Studies show that membrane filtration, advanced oxidation processes, biodegradation, thermal degradation, chemical reduction, and some hybrid processes are the potential DBP treatment technologies. The removal efficiency, possible mechanisms and future challenges of these DBP treatment methods are summarized in this review, which may facilitate their full-scale applications and provide potential directions for further research extension.

Effect-directed analysis (EDA) of Danube River water sample receiving untreated municipal wastewater from Novi Sad, Serbia

The release of a multitude of pollutants from untreated municipal wastewater (UMWW) to surface waters may have adverse effects on aquatic wildlife including endocrine disruption. For effect-directed analysis (EDA), a Danube river water sample downstream of emission of UMWW in Novi Sad, Serbia was extracted on-site and after processing in the lab was subjected to reporter gene assays which revealed pronounced estrogenic (ERα), androgenic (AR) and oxidative stress response (OSR). The sample was fractionated with reversed-phase high performance liquid chromatography (RP-HPLC) collecting thirty fractions at two-minute intervals. Biological analysis identified 5 ERα- and 3 AR-active fractions while none of the fractions showed considerable activity with regards to OSR. It appeared that OSR of parent sample (PS) distributed over all fractions. Chemical analysis of active fractions by LC-MS/MS and LC-HRMS/MS found female reproductive hormones (estrone (E1), estradiol (E2), estriol (E3)) as cause of ERα activity while male reproductive hormones (testosterone, dihydrotestosterone (DHT)) and gestagens (progesterone and medroxyprogesterone) were active in the AR bioassay. Designed chemical mixtures in concentration ratios detected in the active fractions were tested with the bioassays. The identified chemicals quantitatively explained the observed bioactivity with no substantial contribution attributable to xenobiotics. In terms of bioanalytical equivalent concentrations (BEQs), detected chemicals explained 5-159% of ERα-active fraction's biological effect and 31-147% for AR-active fractions. Estradiol and dihydrotestosterone were the compounds dominating the most of the effect in this study. In summary, androgenic compounds were found to be as potent as estrogenic compounds while OSR was found to be the cumulative effect of the mixture of many compounds present in the sample rather than the mixture effect dominated by individual chemicals. The obtained results stress the importance of wastewater treatment plant (WWTP) to minimize the pollutant load from UMWW in order to reduce the risk of endocrine disruption to the aquatic life as well as to improve the status of receiving freshwater ecosystem.

Impact of Suspended Solids on the Use of LuminoTox to Detect Toxicity of Micropollutants

There is an increasing need for tools to monitor toxicity of contaminants of emerging concern (CECs) in wastewater. The purpose of this work was to assess interferences in the presence of total solids (TS) and total suspended solids (TSS) in the LuminoTox at concentrations typical of those found in municipal secondary effluent (SE) and to evaluate a simple sample enrichment method for increased CEC sensitivity. 4 or 10 µg/L atrazine in different TS concentrations and in corresponding filtrates (TSS removed) exhibited equivalent toxicities. Because the only difference between these two fractions is the TSS, this result demonstrates that, generally, this fraction does not induce toxicity nor interfere with the bioassay. At constant medium-low TS, the LuminoTox was able to detect the presence of 4 µg/L of atrazine but could not distinguish the change in atrazine concentration between 4 and 6 µg/L. No inhibition was observed in the presence of a mix of 14 CECs each at 0.23 µg/L. However, upon sample enrichment by lyophilization (50×), an inhibition of 81 ± 3% was observed. The enriched SE alone (not spiked with CECs) led to an inhibition of 49 ± 1%, indicating the detection of the CEC contribution to toxicity after sample preconcentration. The LuminoTox is a promising tool for monitoring SE; however, if the intent is to detect CECs, enrichment method optimization is required.

Bioanalytical assessment of adaptive stress responses in drinking water: A predictive tool to differentiate between micropollutants and disinfection by-products

Drinking water can contain low levels of micropollutants, as well as disinfection by-products (DBPs) that form from the reaction of disinfectants with organic and inorganic matter in water. Due to the complex mixture of trace chemicals in drinking water, targeted chemical analysis alone is not sufficient for monitoring. The current study aimed to apply in vitro bioassays indicative of adaptive stress responses to monitor the toxicological profiles and the formation of DBPs in three drinking water distribution systems in France. Bioanalysis was complemented with chemical analysis of forty DBPs. All water samples were active in the oxidative stress response assay, but only after considerable sample enrichment. As both micropollutants in source water and DBPs formed during treatment can contribute to the effect, the bioanalytical equivalent concentration (BEQ) approach was applied for the first time to determine the contribution of DBPs, with DBPs found to contribute between 17 and 58% of the oxidative stress response. Further, the BEQ approach was also used to assess the contribution of volatile DBPs to the observed effect, with detected volatile DBPs found to have only a minor contribution as compared to the measured effects of the non-volatile chemicals enriched by solid-phase extraction. The observed effects in the distribution systems were below any level of concern, quantifiable only at high enrichment and not different from bottled mineral water. Integrating bioanalytical tools and the BEQ mixture model for monitoring drinking water quality is an additional assurance that chemical monitoring is not overlooking any unknown chemicals or transformation products and can help to ensure chemically safe drinking water.

p53 induction and cell viability modulation by genotoxic individual chemicals and mixtures

The binding of the p53 tumor suppression protein to DNA response elements after genotoxic stress can be quantified by cell-based reporter gene assays as a DNA damage endpoint. Currently, bioassay evaluation of environmental samples requires further knowledge on p53 induction by chemical mixtures and on cytotoxicity interference with p53 induction analysis for proper interpretation of results. We investigated the effects of genotoxic pharmaceuticals (actinomycin D, cyclophosphamide) and nitroaromatic compounds (4-nitroquinoline 1-oxide, 3-nitrobenzanthrone) on p53 induction and cell viability using a reporter gene and a colorimetric assay, respectively. Individual exposures were conducted in the absence or presence of metabolic activation system, while binary and tertiary mixtures were tested in its absence only. Cell viability reduction tended to present direct correlation with p53 induction, and induction peaks occurred mainly at chemical concentrations causing cell viability below 80%. Mixtures presented in general good agreement between predicted and measured p53 induction factors at lower concentrations, while higher chemical concentrations gave lower values than expected. Cytotoxicity evaluation supported the selection of concentration ranges for the p53 assay and the interpretation of its results. The often used 80% viability threshold as a basis to select the maximum test concentration for cell-based assays was not adequate for p53 induction assessment. Instead, concentrations causing up to 50% cell viability reduction should be evaluated in order to identify the lowest observed effect concentration and peak values following meaningful p53 induction.

Development of a bioanalytical test battery for water quality monitoring: Fingerprinting identified micropollutants and their contribution to effects in surface water

Surface waters can contain a diverse range of organic pollutants, including pesticides, pharmaceuticals and industrial compounds. While bioassays have been used for water quality monitoring, there is limited knowledge regarding the effects of individual micropollutants and their relationship to the overall mixture effect in water samples. In this study, a battery of in vitro bioassays based on human and fish cell lines and whole organism assays using bacteria, algae, daphnids and fish embryos was assembled for use in water quality monitoring. The selection of bioassays was guided by the principles of adverse outcome pathways in order to cover relevant steps in toxicity pathways known to be triggered by environmental water samples. The effects of 34 water pollutants, which were selected based on hazard quotients, available environmental quality standards and mode of action information, were fingerprinted in the bioassay test battery. There was a relatively good agreement between the experimental results and available literature effect data. The majority of the chemicals were active in the assays indicative of apical effects, while fewer chemicals had a response in the specific reporter gene assays, but these effects were typically triggered at lower concentrations. The single chemical effect data were used to improve published mixture toxicity modeling of water samples from the Danube River. While there was a slight increase in the fraction of the bioanalytical equivalents explained for the Danube River samples, for some endpoints less than 1% of the observed effect could be explained by the studied chemicals. The new mixture models essentially confirmed previous findings from many studies monitoring water quality using both chemical analysis and bioanalytical tools. In short, our results indicate that many more chemicals contribute to the biological effect than those that are typically quantified by chemical monitoring programs or those regulated by environmental quality standards. This study not only demonstrates the utility of fingerprinting single chemicals for an improved understanding of the biological effect of pollutants, but also highlights the need to apply bioassays for water quality monitoring in order to prevent underestimation of the overall biological effect.

Occurrence and formation of disinfection by-products in the swimming pool environment: A critical review

Disinfection of water for human use is essential to protect against microbial disease; however, disinfection also leads to formation of disinfection by-products (DBPs), some of which are of health concern. From a chemical perspective, swimming pools are a complex matrix, with continual addition of a wide range of natural and anthropogenic chemicals via filling waters, disinfectant addition, pharmaceuticals and personal care products and human body excretions. Natural organic matter, trace amounts of DBPs and chlorine or chloramines may be introduced by the filling water, which is commonly disinfected distributed drinking water. Chlorine and/or bromine is continually introduced via the addition of chemical disinfectants to the pool. Human body excretions (sweat, urine and saliva) and pharmaceuticals and personal care products (sunscreens, cosmetics, hair products and lotions) are introduced by swimmers. High addition of disinfectant leads to a high formation of DBPs from reaction of some of the chemicals with the disinfectant. Swimming pool air is also of concern as volatile DBPs partition into the air above the pool. The presence of bromine leads to the formation of a wide range of bromo- and bromo/chloro-DBPs, and Br-DBPs are more toxic than their chlorinated analogues. This is particularly important for seawater-filled pools or pools using a bromine-based disinfectant. This review summarises chemical contaminants and DBPs in swimming pool waters, as well as in the air above pools. Factors that have been found to affect DBP formation in pools are discussed. The impact of the swimming pool environment on human health is reviewed.

Predicting reactivity of model DOM compounds towards chlorine with mediated electrochemical oxidation

Chlorine demand of a water sample depends on the characteristics of dissolved organic matter (DOM). It is an important parameter for water utilities used to assess oxidant and/or disinfectant consumption of source waters during treatment and distribution. In this study, model compounds namely resorcinol, tannic acid, vanillin, cysteine, tyrosine, and tryptophan were used to represent the reactive moieties of complex DOM mixtures. The reactivity of these compounds was evaluated in terms of Cl₂ demand and electron donating capacity (EDC). The EDC was determined by mediated electrochemical oxidation (MEO) which involves the use of 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) as an electron shuttle. The Cl₂ demand of readily oxidizable compounds (resorcinol, tannic acid, vanillin, and cysteine) was found to correlate well with EDC (R² = 0.98). The EDC values (mol e^-/mol C) of the model compounds are as follows: 1.18 (cysteine) > 0.77 (resorcinol) > 0.59 (vanillin) > 0.52 (tannic acid) > 0.36 (tryptophan) > 0.19 (tyrosine). To determine the effect of pre-oxidation on EDC, ozone was added (0.1 mol O₃/mol C) into each model compound solution. Ozonation caused a general decrease in EDC (10-40%), chlorine demand (10-30%), and UV absorbance (10-40%), except for tyrosine which showed both increased UV₂₇₅ and EDC. Before and after ozonation, 24 h disinfection byproduct (DBP) formation potential tests (Cl₂ residual = 1.5 mg/L) were conducted to evaluate the use of EDC for DBP formation prediction. The results indicate that there was no significant correlation between the EDC of the model compounds and the formation potentials of adsorbable organic chlorine, trichloromethane, and trichloroacetic acid. This suggests that while EDC correlates with Cl₂ demand, chlorine consumption may not directly translate to DBP formation because oxidation reactions may dominate over substitution reactions. Overall, this study provides useful insights on the reactions of ABTS⁺ and HOCl with model DOM compounds, and highlights the potential application of MEO for rapid determination of Cl₂ demand of a water sample.

Integrating chemical analysis and bioanalysis to evaluate the contribution of wastewater effluent on the micropollutant burden in small streams

Surface waters can contain a range of micropollutants from point sources, such as wastewater effluent, and diffuse sources, such as agriculture. Characterizing the source of micropollutants is important for reducing their burden and thus mitigating adverse effects on aquatic ecosystems. In this study, chemical analysis and bioanalysis were applied to assess the micropollutant burden during low flow conditions upstream and downstream of three wastewater treatment plants (WWTPs) discharging into small streams in the Swiss Plateau. The upstream sites had no input of wastewater effluent, allowing a direct comparison of the observed effects with and without the contribution of wastewater. Four hundred and five chemicals were analyzed, while the applied bioassays included activation of the aryl hydrocarbon receptor, activation of the androgen receptor, activation of the estrogen receptor, photosystem II inhibition, acetylcholinesterase inhibition and adaptive stress responses for oxidative stress, genotoxicity and inflammation, as well as assays indicative of estrogenic activity and developmental toxicity in zebrafish embryos. Chemical analysis and bioanalysis showed higher chemical concentrations and effects for the effluent samples, with the lowest chemical concentrations and effects in most assays for the upstream sites. Mixture toxicity modeling was applied to assess the contribution of detected chemicals to the observed effect. For most bioassays, very little of the observed effects could be explained by the detected chemicals, with the exception of photosystem II inhibition, where herbicides explained the majority of the effect. This emphasizes the importance of combining bioanalysis with chemical analysis to provide a more complete picture of the micropollutant burden. While the wastewater effluents had a significant contribution to micropollutant burden downstream, both chemical analysis and bioanalysis showed a relevant contribution of diffuse sources from upstream during low flow conditions, suggesting that upgrading WWTPs will not completely reduce the micropollutant burden, but further source control measures will be required.

Biodegradability of DBP precursors after drinking water ozonation

Ozonation is known to generate biodegradable organic matter, which is typically reduced by biological filtration to avoid bacterial regrowth in distribution systems. Post-chlorination generates halogenated disinfection byproducts (DBPs) but little is known about the biodegradability of their precursors. This study determined the effect of ozonation and biofiltration conditions, specifically ozone exposure and empty bed contact time (EBCT), on the control of DBP formation potentials in drinking water. Ozone exposure was varied through addition of H₂O₂ during ozonation at 1 mgO₃/mgDOC followed by biological filtration using either activated carbon (BAC) or anthracite. Ozonation led to a 10% decrease in dissolved organic carbon (DOC), without further improvement from H₂O₂ addition. Raising H₂O₂ concentrations from 0 to 2 mmol/mmolO₃ resulted in increased DBP formation potentials during post-chlorination of the ozonated water (target Cl₂ residual after 24 h = 1-2 mg/L) as follows: 4 trihalomethanes (THM4, 37%), 8 haloacetic acids (HAA8, 44%), chloral hydrate (CH, 107%), 2 haloketones (HK2, 97%), 4 haloacetonitriles (HAN4, 33%), trichloroacetamide (TCAM, 43%), and adsorbable organic halogen (AOX, 27%), but a decrease in the concentrations of 2 trihalonitromethanes (THNM2, 43%). Coupling ozonation with biofiltration prior to chlorination effectively lowered the formation potentials of all DBPs including CH, HK2, and THNM2, all of which increased after ozonation. The dynamics of DBP formation potentials during BAC filtration at different EBCTs followed first-order reaction kinetics. Minimum steady-state concentrations were attained at an EBCT of about 10-20 min, depending on the DBP species. The rate of reduction in DBP formation potentials varied among individual species before reaching their minimum concentrations. CH, HK2, and THNM2 had the highest rate constants of between 0.5 and 0.6 min^-1 followed by HAN4 (0.4 min^-1), THM4 (0.3 min^-1), HAA8 (0.2 min^-1), and AOX (0.1 min^-1). At an EBCT of 15 min, the reduction in formation potential for most DBPs was less than 50% but was higher than 70% for CH, HK2, and THNM2. The formation of bromine-containing DBPs increased with increasing EBCT, most likely due to an increase in Br^-/DOC ratio. Overall, this study demonstrated that the combination of ozonation and biofiltration is an effective approach to mitigate DBP formation during drinking water treatment.

N-Nitrosamines and halogenated disinfection byproducts in U.S. Full Advanced Treatment trains for potable reuse

Water utilities are increasingly considering indirect and direct potable reuse of municipal wastewater effluents. Disinfection byproducts (DBPs), particularly N-nitrosamines, are key contaminants of potential health concern for potable reuse. This study quantified the concentrations of N-nitrosamines and a suite of regulated and unregulated halogenated DBPs across five U.S. potable reuse Full Advanced Treatment trains incorporating microfiltration, reverse osmosis, and UV-based advanced oxidation. Low μg/L concentrations of trihalomethanes, haloacetic acids, dichloroacetonitrile, and dichloroacetamide were detected in the secondary or tertiary wastewater effluents serving as influents to potable reuse treatment trains, while the concentrations of N-nitrosamines were more variable (e.g., <2-320 ng/L for N-nitrosodimethylamine). Ozonation promoted the formation of N-nitrosamines, haloacetaldehydes, and haloacetamides, but biological activated carbon effectively reduced concentrations of these DBPs. Application of chloramines upstream of microfiltration for biofouling control increased DBP concentrations to their highest levels observed along the treatment trains. Reverse osmosis rejected DBPs to varying degrees, ranging from low for some (e.g., N-nitrosamines, trihalomethanes, and haloacetonitriles) to high for other DBPs. UV-based advanced oxidation eliminated N-nitrosamines, but only partially removed halogenated DBPs. Chloramination of the treatment train product waters under simulated distribution system conditions formed additional DBPs, with concentrations often equaling or exceeding those in the treatment train influents. Overall, the concentration profiles of DBPs were fairly consistent within individual treatment trains for sampling campaigns separated by months and across different treatment trains for the same sampling time window. Weighting DBP concentrations by their toxic potencies highlighted the potential significance of haloacetonitriles, which were not effectively removed by reverse osmosis and advanced oxidation, to the DBP-associated toxicity in potable reuse waters.

Progressive Increase in Disinfection Byproducts and Mutagenicity from Source to Tap to Swimming Pool and Spa Water: Impact of Human Inputs

Pools and spas are enjoyed throughout the world for exercise and relaxation. However, there are no previous studies on mutagenicity of disinfected spa (hot tub) waters or comprehensive identification of disinfection byproducts (DBPs) formed in spas. Using 28 water samples from seven sites, we report the first integrated mutagenicity and comprehensive analytical chemistry of spas treated with chlorine, bromine, or ozone, along with pools treated with these same disinfectants. Gas chromatography (GC) with high-resolution mass spectrometry, membrane-introduction mass spectrometry, and GC-electron capture detection were used to comprehensively identify and quantify DBPs and other contaminants. Mutagenicity was assessed by the Salmonella mutagenicity assay. More than 100 DBPs were identified, including a new class of DBPs, bromoimidazoles. Organic extracts of brominated pool/spa waters were 1.8× more mutagenic than chlorinated ones; spa waters were 1.7× more mutagenic than pools. Pool and spa samples were 2.4 and 4.1× more mutagenic, respectively, than corresponding tap waters. The concentration of the sum of 21 DBPs measured quantitatively increased from finished to tap to pool to spa; and mutagenic potency increased from finished/tap to pools to spas. Mutagenic potencies of samples from a chlorinated site correlated best with brominated haloacetic acid concentrations (Br-HAAs) (r = 0.98) and nitrogen-containing DBPs (N-DBPs) (r = 0.97) and the least with Br-trihalomethanes (r = 0.29) and Br-N-DBPs (r = 0.04). The mutagenic potencies of samples from a brominated site correlated best (r = 0.82) with the concentrations of the nine HAAs, Br-HAAs, and Br-DBPs. Human use increased significantly the DBP concentrations and mutagenic potencies for most pools and spas. These data provide evidence that human precursors can increase mutagenic potencies of pools and spas and that this increase is associated with increased DBP concentrations.