Efficient inactivation of antibiotic resistant bacteria and antibiotic resistance genes by photo-Fenton process under visible LED light and neutral pH

A comprehensive review of antibiotic resistance gene contamination in agriculture: Challenges and AI-driven solutions

Since their discovery, the prolonged and widespread use of antibiotics in veterinary and agricultural production has led to numerous problems, particularly the emergence and spread of antibiotic-resistant bacteria (ARB). In addition, other anthropogenic factors accelerate the horizontal transfer of antibiotic resistance genes (ARGs) and amplify their impact. In agricultural environments, animals, manure, and wastewater are the vectors of ARGs that facilitate their spread to the environment and humans via animal products, water, and other environmental pathways. Therefore, this review comprehensively analyzed the current status, removal methods, and future directions of ARGs on farms. This article 1) investigates the origins of ARGs on farms, the pathways and mechanisms of their spread to surrounding environments, and various strategies to mitigate their spread; 2) determines the multiple factors influencing the abundance of ARGs on farms, the pathways through which ARGs spread from farms to the environment, and the effects and mechanisms of non-antibiotic factors on the spread of ARGs; 3) explores methods for controlling ARGs in farm wastes; and 4) provides a comprehensive summary and integration of research across various fields, proposing that in modern smart farms, emerging technologies can be integrated through artificial intelligence to control or even eliminate ARGs. Moreover, challenges and future research directions for controlling ARGs on farms are suggested.

Removal of antibiotic resistant bacteria and antibiotic resistance genes by an electrochemically driven UV/chlorine process for decentralized water treatment

The UV/chlorine (UV/Cl2) process is a developing advanced oxidation process and can efficiently remove antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). However, the transportation and storage of chlorine solutions limit the application of the UV/Cl2 process, especially for decentralized water treatment. To overcome the limitation, an electrochemically driven UV/Cl2 process (E-UV/Cl2) where Cl2 can be electrochemically produced in situ from anodic oxidation of chloride (Cl-) ubiquitously present in various water matrices was evaluated in this study. >5-log inactivation of the ARB (E. coli) was achieved within 5 s of the E-UV/Cl2 process, and no photoreactivation of the ARB was observed after the treatment. In addition to the ARB, intracellular and extracellular ARGs (tetA, sul1, sul2, and ermB) could be effectively degraded (e.g., log(C0/C) > 4 for i-ARGs) within 5 min of the E-UV/Cl2 process. Atomic force microscopy showed that the most of the i-ARGs were interrupted into short fragments (< 30 nm) during the E-UV/Cl2 process, which can thus effectively prevent the self-repair of i-ARGs and the horizontal gene transfer. Modelling results showed that the abatement efficiencies of i-ARG correlated positively with the exposures of •OH, Cl2-•, and ClO• during the E-UV/Cl2 process. Due to the short treatment time (5 min) required for ARB and ARG removal, insignificant concentrations of trihalomethanes (THMs) were generated during of the E-UV/Cl2 process, and the energy consumption (EEO) of ARG removal was ∼0.20‒0.27 kWh/m3-log, which is generally comparable to that of the UV/Cl2 process (0.18-0.23 kWh/m3-log). These results demonstrate that the E-UV/Cl2 process can provide a feasible and attractive alternative to the UV/Cl2 process for ARB and ARG removal in decentralized water treatment system.

A novel interpretable machine learning and metaheuristic-based protocol to predict and optimize ciprofloxacin antibiotic adsorption with nano-adsorbent

The existence of antibiotics in water sources poses substantial hazards to both the environment and public health. To effectively monitor and combat this problem, accurate predictive models are essential. This research focused on employing machine learning (ML) techniques to construct some models for analyzing the adsorption capacity of ciprofloxacin (CIP) antibiotic from contaminated water. The robustness of ten machine learning algorithms was evaluated using performance metrics such as the Coefficient of determination (R2), Mean Square Error (MSE), Median Absolute Error (MedAE), Mean Absolute Error (MAE), Correlation coefficient (R), Nash-Sutcliffe Efficiency (NSE), Kling-Gupta Efficiency (KGE), and Root Mean Square Error (RMSE). The hyperparameters of the ML models were fine-tuned using the Bayesian optimization algorithm. The optimized models were comprehensively evaluated using feature importance analysis to quantify the relative significance of operational variables accurately. After a thorough assessment and comparison of various machine learning models, it was evident that the HistGradientBoosting (HGB) model outperformed others in terms of CIP adsorption performance. This was supported by their low MAE value of 0.1865 and high R2 value of 0.9999. The modeling projected the highest antibiotic adsorption (99.28%) under optimized conditions, including 10 mg/L of CIP, 357 mg/L of CuWO4@TiO2 adsorbent, a contact time of 60 min at room temperature, and near neutral pH (7.5). The combination of advanced ML algorithms and nano adsorbents has great potential for addressing the problem of antibiotic pollution in water sources.

Fate and mitigation of antibiotics and antibiotic resistance genes in microbial fuel cell and coupled systems

Microbial fuel cells (MFCs), known for their low energy consumption, high efficiency, and environmental friendliness, have been widely utilized for removing antibiotics from wastewater. Compared to conventional wastewater treatment methods, MFCs produce less sludge while exhibiting superior antibiotic removal capacity, effectively reducing the spread of antibiotic resistance genes (ARGs). This study investigates 1) the mechanisms of ARGs generation and proliferation in MFCs; 2) the influencing factors on the fate and removal of antibiotics and ARGs; and 3) the fate and mitigation of ARGs in MFC and MFC-coupled systems. It is indicated that high removal efficiency of antibiotics and minimal amount of sludge production contribute the mitigation of ARGs in MFCs. Influencing factors, such as cathode potential, electrode materials, salinity, initial antibiotic concentration, and additional additives, can lead to the selection of tolerant microbial communities, thereby affecting the abundance of ARGs carried by various microbial hosts. Integrating MFCs with other wastewater treatment systems can synergistically enhance their performance, thereby improving the overall removal efficiency of ARGs. Moreover, challenges and future directions for mitigating the spread of ARGs using MFCs are suggested.

Mechanism-guided strategies for combating antibiotic resistance

Bacterial antibiotic resistance has been recognized as a global threat to public health. It challenges the antibiotics currently used in clinical practice and causes severe and often fatal infectious diseases. Fighting against antibiotic-resistant bacteria (ARB) is growing more urgent. While understanding the molecular mechanisms that underlie resistance is a prerequisite, several major mechanisms have been previously proposed including bacterial efflux systems, reduced cell membrane permeability, antibiotic inactivation by enzymes, target modification, and target protection. In this context, this review presents a panel of promising and potential strategies to combat antibiotic resistance/resistant bacteria. Different types of direct-acting and indirect resistance breakers, such as efflux pump inhibitors, antibiotic adjuvants, and oxidative treatments are discussed. In addition, the emerging multi-omics approaches for rapid resistance identification and promising alternatives to existing antibiotics are highlighted. Overall, this review suggests that continued effort and investment in research are required to develop new antibiotics and alternatives to existing antibiotics and translate them into environmental and clinical applications.

Photodynamic inactivation of antibiotic-resistant bacteria in whole blood using riboflavin photodynamic method

Treating bacteremia caused by antibiotic-resistant bacteria is a global concern. Antibacterial photodynamic inactivation is a promising strategy to combat it. However, it's challenging to achieve the inactivation of antibiotic-resistant bacteria in whole blood because of its opacity and complexity. We investigated a riboflavin photodynamic method to effectively inactivate antibiotic-resistant bacteria in whole blood. Four strains of antibiotic-resistant bacteria were isolated, identified, and cultured in this research: methicillin-resistant Staphylococcus aureus (MRSA), pan-drug-resistant Acinetobacter baumannii (PDRAB), ESBLs-producing Escherichia coli (EPEC) and pan-drug-resistant Klebsiella pneumoniae (PDRKP). To simulate bacteremia, antibiotic-resistant bacteria was added into whole blood. Whole blood was treated using riboflavin photodynamic method with ultraviolet irradiation (308 nm and 365 nm). The ultraviolet irradiation dose was divided into 18 J/cm2, 36 J/cm2, and 54 J/cm2. Microbial count of antibiotic-resistant bacteria in whole blood was used for evaluating inactivation effectiveness. The roles of red blood cells, lymphocytes, coagulation factors, and platelets in whole blood were assessed. In results, inactivation effectiveness increased as the ultraviolet dose increased from 18 J/cm2 to 54 J/cm2. At the dose of 18 J/cm2, inactivation effectiveness of four antibiotic-resistant bacteria were more than 80%, while only 67% of MRSA. The antibacterial effect was enhanced by the combination of riboflavin photodynamic treatment and antibiotic. The red blood cell function was susceptible to ultraviolet dose. At the dose of 18 J/cm2, hemolysis rate was less than 0.8% and there was no change in levels of ATP and 2,3-DPG. At the same dose, the proliferation, cell killing, and cytokine secretion activities of lymphocytes decreased 20-70%; Factor V and Factor VIII activities decreased 50%; Fibrinogen and platelet function loss significantly but reparable. Consequently, we speculated that riboflavin photodynamic method with a ultraviolet dose of 18 J/cm2 was effective in inactivating four antibiotic-resistant bacteria in whole blood while whole blood function was preserved. We also provided a novel extracorporeal circulation phototherapy mode for treating bacteremia caused by antibiotic-resistant bacteria.

The escalating threat of human-associated infectious bacteria in surface aquatic resources: Insights into prevalence, antibiotic resistance, survival mechanisms, detection, and prevention strategies

Anthropogenic activities and climate change profoundly impact water quality, leading to a concerning increase in the prevalence and abundance of bacterial pathogens across diverse aquatic environments. This rise has resulted in a growing challenge concerning the safety of water sources, particularly surface waters and marine environments. This comprehensive review delves into the multifaceted challenges presented by bacterial pathogens, emphasizing threads to human health within ground and surface waters, including marine ecosystems. The exploration encompasses the intricate survival mechanisms employed by bacterial pathogens and the proliferation of antimicrobial resistance, largely driven by human-generated antibiotic contamination in aquatic systems. The review further addresses prevalent pathogenic bacteria, elucidating associated risk factors, exploring their eco-physiology, and discussing the production of potent toxins. The spectrum of detection techniques, ranging from conventional to cutting-edge molecular approaches, is thoroughly examined to underscore their significance in identifying and understanding waterborne bacterial pathogens. A critical aspect highlighted in this review is the imperative for real-time monitoring of biomarkers associated with waterborne bacterial pathogens. This monitoring serves as an early warning system, facilitating the swift implementation of action plans to preserve and protect global water resources. In conclusion, this comprehensive review provides fresh insights and perspectives, emphasizing the paramount importance of preserving the quality of aquatic resources to safeguard human health on a global scale.

Transmission mechanism of antibiotic resistance genes and their differences between water and sediment in the Weihe River Basin

Antibiotic resistance genes (ARGs) are emerging microbial pollutants that are regulated by many factors and pose potential threats to aquatic environments. In this study, we used network analysis, correlation analysis, and constructed models based on metagenomic sequencing results to explore the spatial patterns, impact mechanisms, transmission risks and differences in ARGs in the water and sediment of the Weihe River Basin. The findings revealed notable disparities in ARGs, mobile genetic elements (MGEs), and bacterial communities. In the sediment, the abundance of ARGs was considerably greater than that in water. Moreover, the percentage of ARGs shared by the two components reached a value of 85.8%. Through network analysis, it was determined that the presence of 16 MGEs and 20 bacterial phyla was strongly associated with ARGs (R2 > 0.7, P < 0.05). The Mantel test showed that abiotic factors including DO, pH, nutrients, and heavy metals played important roles in the distribution of ARGs (P < 0.05). A structural equation model revealed that the key factors influencing the distribution of ARGs in water were bacterial diversity and environmental parameters (standardized effects of -0.730 and -0.667), and those in sediment were bacterial diversity and MGEs (standardized effects of -0.751 and 0.851). Neutral modeling indicated that deterministic processes played an important role in the assembly of ARGs in the water of the Weihe River Basin, and stochastic processes were dominant in the sediment. There was a highly significant positive linear correlation between ARGs and pathogens, and there was more complex co-occurrence in the water than in the sediment (R2 > 0.9, P < 0.05), with stronger migration and transmission occurring. Exploring ARGs in large-scale watersheds is immensely important for elucidating their traits and transmission mechanisms and consequently paving the way for the formulation of efficient strategies to mitigate resistance threats.

Effect of dissolved organic matter on bacterial regrowth and response after ultraviolet disinfection

The effect of dissolved organic matter (DOM) on bacterial regrowth in water after disinfection using ultraviolet (UV) light emitting diodes (UVLEDs) is still unclear. Herein, the regrowth and responses of Vibrio parahaemolyticus and Bacillus cereus were investigated after being exposed to UVLEDs at combined wavelengths (265 and 280 nm) in a phosphate-buffered saline consisting of Suwannee River natural organic matter (SRNOM) and Suwannee River fulvic acid (SRFA). Low-molecular-weight (MW) organic compounds, which may form into intermediary photoproducts, and indicate bacterial repair metabolism, were characterized through non-target screening using orbitrap mass spectrometry. This study demonstrates the ability of the UVLEDs-inactivated cells to regrow. After UV exposure, a considerable upregulation of RecA was observed in two strains. With increasing the incubation time, the expression levels of RecA in V. parahaemolyticus increased, which may be attributed to the dark repair mechanism. Coexisting anionic DOM affects both the disinfection and bacterial regrowth processes. The time required for bacterial regrowth after UV exposure reflects the time needed for the individual cells to reactivate, and it differs in the presence or absence of DOM. In the presence of DOM, the cells were less damaged and required less time to grow. The UVLEDs exposure results in the occurrence of low-MW organic compounds, including carnitine or acryl-carnitine with N-acetylmuramic acid, which are associated with bacterial repair metabolism. Overall, the results of this study expand the understanding of the effects of water matrices on bacterial health risks. This can aid in the development of more effective strategies for water disinfection.

Molecular level removal of antibiotic resistant bacteria and genes: A review of interfacial chemical in advanced oxidation processes

As a kind of novel and persistent environmental pollutants, antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been frequently detected in different aquatic environment, posing potential risks to public health and ecosystems, resulting in a biosecurity issue that cannot be ignored. Therefore, in order to control the spread of antibiotic resistance in the environment, advanced oxidation technology (such as Fenton-like, photocatalysis, electrocatalysis) has become an effective weapon for inactivating and eliminating ARB and ARGs. However, in the process of advanced oxidation technology, studying and regulating catalytic active sites at the molecular level and studying the adsorption and surface oxidation reactions between catalysts and ARGs can achieve in-depth exploration of the mechanism of ARGs removal. This review systematically reveals the catalytic sites and related mechanisms of catalytic antagonistic genes in different advanced oxidation processes (AOPs) systems. We also summarize the removal mechanism of ARGs and how to reduce the spread of ARGs in the environment through combining a variety of characterization methods. Importantly, the potential of various catalysts for removing ARGs in practical applications has also been recognized, providing a promising approach for the deep purification of wastewater treatment plants.

Ozone degradation of tetracycline hydrochloride enhanced by magnetic nanofluid composed of Fe3O4 nanoparticles

Magnetic Fe3O4 nanoparticles were added into the aqueous phase to form nanofluid systems, in which ozone was used for the oxidation of tetracycline hydrochloride (TC) in the solution. The nanomaterials were characterized using SEM, XRD, EDS, and FT-IR. The effects of nanoparticles size, addition ratio, and number of cycles on the process of ozone oxidation of TC were investigated. The results indicated that the addition ratio of nanoparticles have a certain impact on the performance of ozone oxidation. When the addition ratio increased from 0.02% to 0.4%, the removal rate of TC in the solution was improved significantly. Besides, the particle size of nanoparticles showed a greater impact on ozone oxidation. At the nanoscale, Fe3O4 nanoparticles exhibited significant strengthening properties, which is attributed to the construction of nanofluid systems. The removal rate of TC in solution decreased obviously with the increase of nanoparticles size. The Fe3O4 nanoparticles with particle size of 20 nm showed the most significant effect on TC degradation. The recycling experiment showed that magnetic Fe3O4 nanoparticles had stable regeneration performance. For three times of recycling treatment, with a Fe3O4 addition ratio of 0.4%, the removal rate of TC reached 98.7%, 97.21%, and 96%, respectively. Based on the characterization results, the strengthening mechanism was analyzed. The experimental results indicated that construction of nanofluids systems could improve the utilization rate of ozone, and Fe3O4 nanoparticles were reusable and easily recyclable.

Visible light-driven C/O-g-C3N4 activating peroxydisulfate to effectively inactivate antibiotic resistant bacteria and inhibit the transformation of antibiotic resistance genes: Insights on the mechanism

Antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) dissemination within water pose a serious threat to public health. Herein, C and O dual-doped g-C3N4 (C/O-g-C3N4) photocatalyst, fabricated via calcination treatment, was utilized to activate peroxydisulfate (PDS) to investigate the disinfection effect on tetracycline-resistant Escherichia coli and the transformation frequency of ARGs. As a result, approximately 7.08 log E. coli were inactivated, and 72.36 % and 53.96 % of antibiotics resistance gene (tetB) and 16 S rRNA were degraded respectively within 80 min. Futhermore, the transformation frequency was reduced to 0.8. Characterization and theoretical results indicated that C and O doping in g-C3N4 might lead to the electronic structure modulation and band gap energy reduction, resulting in the production of more free radicals. The mechanism analysis revealed that C/O-g-C3N4 exhibited a lower adsorption energy and reaction energy barrier for PDS compared to g-C3N4. This was beneficial for the homolysis of O-O bonds, forming SO4•- radicals. The attack of the generated active species led to oxidative stress in cells, resulting in damage to the electron transport chain and inhibition of ATP production. Our findings disclose a valuable insight for inactivating ARB, and provide a prospective strategy for ARGs dissemination in water contamination.

Combined applications of UV and chlorine on antibiotic resistance control: A critical review

Environmental health problems caused by antibiotic-resistant bacteria (ARB) and antibiotic-resistant genes (ARGs) have become a global concern. ARB and ARGs have been continuously detected in various water environments, which pose a new challenge for water quality safety assurance. Disinfection is a key water treatment process to eliminate pathogenic microorganisms in water, and combined chlorine and UV processes (the UV/Cl2 process, the UV-Cl2 process, and the Cl2-UV process) are considered potential disinfection methods to control antibiotic resistance. This review documented the efficacy and mechanism of combined UV and chlorine processes for the control of antibiotic resistance, as well as the effects of chlorine dose, solution pH, UV wavelength, and water matrix on the effectiveness of the processes. There are knowledge gaps in research on the combined chlorine and UV processes for antibiotic resistance control, in particular the UV-Cl2 process and the Cl2-UV process. In addition, changes in the structure of microbial communities and the distribution of ARGs, which are closely related to the spread of antibiotic resistance in the water, induced by combined processes were also addressed. Whether these changes could lead to the re-transmission of antibiotic resistance and harm human health may need to be further evaluated.

Fate, risk and sources of antibiotic resistome and its attenuation dynamics in the river water-sediment system: Field and microcosm study

Antibiotic resistance genes (ARGs) in rivers have received widespread attentions. Deciphering the fate and spread mechanisms of ARGs in river system can contribute to the design of effective strategies for reducing resistome risk in the environment. Although some studies have reported the prevalence and distribution of ARGs in rivers worldwide, few have systematically explored their fates, sources and risks in river water-sediment system. Also, the role of natural sunlight on the attenuation and fate of ARGs in river remains to be demonstrated. To fill the gaps, field investigation and microcosm experiment have been conducted in this study to reveal the fate, risk, source-sink relationship and attenuation dynamics of ARGs in an urban river water-sediment system, by utilizing high-throughput sequencing-based metagenomic assembly analysis and machine-learning-based source tracking tool. In all, 527 unique ARGs belonging to 29 antimicrobial classes were identified in the river. Relatively, the level of ARGs in the sediments were significantly higher (p < 0.05) than that in the waters. Variance partitioning analysis indicated the biotic and abiotic factors co-governed the riverine resistome, totally explaining 76% and 83% variations of ARGs in the waters and sediments, respectively. Microcosm experiment under natural light and dark condition showed that light induced the decay of ARGs in the waters and might promote their transfers from waters to sediments, which were also confirmed by the attenuation dynamics of bacteria in the experimental water-sediment system. Notably, the co-occurrences of ARGs with MGEs and VFs on the same contigs suggested resistome risk in the river, and relatively, the risk scores in the sediments were significantly higher (p < 0.05) than those in the waters. Source apportionment with metagenomic resistome signatures showed the Wenyu River was the most dominant contributor of ARGs in the downstream, with average contributions of 44.5% and 40.8% in the waters and sediments, respectively.

Risk characteristics of resistome coalescence in irrigated soils and effect of natural storage of irrigation materials on risk mitigation

Irrigation and fertilization are the routinely agricultural practices but also cause resistome coalescence, by which the entire microbiomes from irrigation materials invade soil microbial community, to transfer antibiotic resistance genes (ARGs) in the coalesced soils. Although studies have reported the effect of irrigation or fertilization on the prevalence and spread of ARGs in soils, risk characteristics of resistome coalescence in irrigation system remain to be demonstrated and few has shown whether natural storage of irrigation materials will reduce resistance risks. To fill the gaps, two microscopic experiments were conducted for deeply exploring resistance risks in the soils irrigated with wastewater and manure fertilizer from a perspective of community coalescence by metagenomic analysis, and to reveal the effect of natural storage of irrigation materials on the reduction of resistance risks in the coalesced soils. Results showed irrigation and coalescence significantly increased the abundance and diversity of ARGs in the soils, and introduced some emerging resistance genes into the coalesced community, including mcr-type, tetX, qacB, and an array of genes conferring resistance to carbapenem. Procrustes analysis demonstrated microbial community was significantly correlated with the ARGs in coalesced soils, and variance partitioning analysis quantified its dominant role on shaping resistome profile in the environment. Besides ARGs, abundant and diverse mobile genetic elements (MGEs) were also identified in the coalesced soils and co-existed on the ARG-carrying contigs, implying potential transfer risk of ARGs in the irrigation system. Further, the analysis of metagenome-assembled genomes (MAGs) confirmed the risk by recovering 358 ARGs-carrying MAGs and identifying the resistant bacteria that co-carried multiple ARGs and MGEs. As expected, the natural storage of irrigation water and manure fertilizer reduced about 27%-54% of ARGs, MGEs and virulence factors in the coalesced soils, thus caused the soils to move towards lower resistance risks to a certain extent.

Efficient Removal of Antibiotic Resistance Genes through 4f-2p-3d Gradient Orbital Coupling Mediated Fenton-Like Redox Processes

Peroxymonosulfate (PMS) mediated radical and nonradical active substances can synergistically achieve the efficient elimination of antibiotic resistance genes (ARGs). However, enhancing interface electron cycling and optimizing the coupling of the oxygen-containing intermediates to improve PMS activation kinetics remains a major challenge. Here, Co doped CeVO4 catalyst (Co-CVO) with asymmetric sites was constructed based on Ce 4f-O 2p-Co 3d gradient orbital coupling. The catalyst achieved approximately 2.51×105 copies/mL of extracellular ARGs (eARGs) removal within 15 minutes, exhibited ultrahigh degradation rate (k=1.24 min-1 ). The effective gradient 4f-2p-3d orbital coupling precisely regulates the electron distribution of Ce-O-Co active center microenvironment, while optimizing the electronic structure of Co 3d states (especially the occupancy of eg ), promoting the adsorption of oxygen-containing intermediates. The generated radical and nonradical generated by interfacial electron cycling enhanced by the reduction reaction of PMS at the Ce site and the oxidation reaction at the Co site achieved a significant mineralization rate of ARGs (83.4 %). The efficient removal of ARGs by a continuous flow reactor for 10 hours significantly reduces the ecological risk of ARGs in actual wastewater treatment.

LED-irradiated photo-Fenton process on pollutant removal: outcomes, trends, and limitations

This manuscript critically reviews the state of the art on the application of photo-Fenton processes irradiated by light-emitting diode arrays (LED) with a focus on the removal of contaminants of emerging concern (CEC) from aqueous matrices. LEDs are clean, low-cost radiation sources with longer lifespan compared to mercury lamps. This study covers the influence of LED sources, wavelengths, and dose upon CEC removal, and the potential for disinfection, abatement of antibiotic-resistant bacteria (ARB), and genes (ARG). The bibliographic search was performed in Scopus database using keyword combinations and resulted in a portfolio containing 52 relevant articles published between 2010-2023. According to reviewed papers, LED photoreactor design has evolved in the past decade aiming to improve CEC degradation in aqueous matrices while reducing construction and operation costs, and energy consumption. Among several reactors (annular, fluidized bed, parallel plate, wireless, pathway systems, and microreactor) surveyed for their performance and scalability, LED chips and strips are particularly suitable for application due to their wide emission angle (≈120°) and small size (mm2), which allow for, respectively, efficient illumination coverage and flexible arrangement and design. LED microreactors are very efficient in the degradation of contaminants and scalable with reduced area requirements. Although most studies were performed in synthetic solutions and at laboratory scale, the externally LED irradiated cylindrical reactor was successful for application in full-scale municipal water treatment plants. Future studies should focus on evaluating CEC removal in wastewater using scalable devices for continuous operation of solar photo-Fenton at night.

Phototransformation of extracellular polymeric substances in activated sludge and their interaction with microplastics

Substantial amounts of extracellular polymeric substances (EPS) are present in sludge from wastewater treatment plants (WWTP), and EPS can significantly affect the fate, bioavailability, and toxicity of microplastics (MPs) that coexist in the effluent, however, the mechanism of action between EPS and microplastics remains unclear. In addition, ultraviolet (UV) disinfection is indispensable in the wastewater treatment process in WWTP, which can significantly affect the characteristics of EPS. Therefore, it is of great significance to study the photochemical characteristics of EPS and the effect on binding MPs. In this study, using multispectral technology and two-dimensional correlation spectroscopy analysis, indicates that the molecular weight and aromaticity of EPS after phototransformation were reduced. The results showed that the adsorption of EPS on PSMPs was in the order of TB-EPS > LB-EPS > S-EPS, which was positively correlated with the SUVA254, but negatively correlated with O/C of EPS. This indicates that the main adsorption mechanisms of PSMPs on EPS were π-π and hydrophobicity. The adsorption capacity of S-EPS, LB-EPS and TB-EPS to PSMPs decreased with the increasing of illumination time. After phototransformation, the adsorption sensitivity and reaction sequence of EPS and PSMPs did not change much. This research provides a theoretical basis for understanding the photochemical transformation of extracellular polymers and the morphology and migration of microplastics in sewage treatment, and evaluating the impact of microplastics on ecosystems.

Synergistic removal of pharmaceuticals and antibiotic resistance from ultrafiltered WWTP effluent: Free-floating ARGs exceptionally susceptible to degradation

To protect the environment and human health, antibiotic resistance genes (ARGs) and persistent pharmaceuticals need to be removed from WWTP effluent prior to its reuse. However, an efficient process for removing free-floating extracellular DNA (exDNA) in combination with a wide range of pharmaceuticals is yet to be reported for real process conditions. As a possible solution, we treated real ultrafiltered WWTP effluent with UV/H₂O₂ and combined GAC and zeolite sorption. In terms of exDNA, sequencing and high-throughput quantitative PCR (HT-qPCR) showed that exDNA is a potent carrier of numerous ARGs in ultrafiltered WWTP effluent (123 ARGs), including multi-drug efflux pump mexF that became the dominant exARG in GAC effluent over time. Due to the exposure to degradation agents, exDNA was reduced more efficiently than intracellular DNA, and overall levels of ARGs were substantially lowered. Moreover, GAC sorption was particularly effective in the removal of almost all the 85 detected pharmaceutical residues, with fresh GAC demonstrating an efficiency of up to 100%. However, zeolite (Si/Al 0.8) addition was needed to enhance the removal of persistent pollutants such as gabapentin and diclofenac to 57% and up to 100%, respectively. Our combined approach eminently decreases the hazardous effects of pharmaceuticals and antibiotic resistance in the ultrafiltered WWTP effluent, producing effluent suitable for multiple reuse options according to the latest legislation. In addition, we provided similarly promising but less extensive data for surface water and treated greywater.

Simultaneous removal of antibiotic-resistant Escherichia coli and its resistance genes by dielectric barrier discharge plasma

As emerging contaminants, antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been widely detected in various aqueous environments. For antibiotic resistance to be inhibited in the environment, it is essential to control ARB and ARGs. In this study, dielectric barrier discharge (DBD) plasma was used to inactivate antibiotic resistant Escherichia coli (AR E. coli) and remove ARGs simultaneously. Within 15 s of plasma treatment, 108 CFU/mL of AR E. coli were inactivated by 97.9%. The rupture of the bacterial cell membrane and the increase of intracellular ROS are the main reasons for the rapid inactivation of bacteria. Intracellular ARGs (i-qnrB, i-blaCTX-M, i-sul2) and integron gene (i-int1) decreased by 2.01, 1.84, 2.40, and 2.73 log after 15 min of plasma treatment, respectively. In the first 5 min of discharge, extracellular ARGs (e-qnrB, e-blaCTX-M, e-sul2) and integron gene (e-int1) decreased by 1.99, 2.22, 2.66, and 2.80 log, respectively. The results of the ESR and quenching experiments demonstrated that ·OH and 1O2 played important roles in the removal of ARGs. This study shows that DBD plasma is an effective technique to control ARB and ARGs in waters.

Peracetic acid disinfection induces antibiotic-resistant E. coli into VBNC state but ineffectively eliminates the transmission potential of ARGs

The occurrence of a viable but nonculturable (VBNC) state in antibiotic-resistant E. coli (AR E. coli) and inefficient degradation of their antibiotic resistance genes (ARGs) may cause potential health risks during disinfection. Peracetic acid (PAA) is an alternative disinfectant for replacing chlorine-based oxidants in wastewater treatment, and the potential of PAA to induce a VBNC state in AR E. coli and to remove the transformation functionality of ARGs were investigated for the first time. Results show that PAA exhibits excellent performance in inactivating AR E. coli (over 7.0-logs) and persistently inhibiting its regeneration. After PAA disinfection, insignificant changes in the ratio of living to dead cells (∼4%) and the level of cell metabolism, indicating that AR E. coli were induced into VBNC states. Unexpectedly, PAA was found to induce AR E. coli into VBNC state by destroying the proteins containing reactive amino acids at thiol, thioether and imidazole groups, rather than the result of membrane damage, oxidative stress, lipid destruction and DNA disruption in the conventional disinfection processes. Moreover, the result of poor reactivity between PAA and plasmid strands and bases confirmed that PAA hardly reduced the abundance of ARGs and damaged the plasmid's integrity. Transformation assays and real environment validation indicated that PAA-treated AR E. coli could release large abundance of naked ARGs with high-efficiency transformation functionality (∼5.4 × 10-4 - ∼8.3 × 10-6) into the environment. This study has significant environmental implications for assessing the transmission of antimicrobial resistance during PAA disinfection.

Microbiome recognition of virulence-factor-governed interfacial mechanisms in antibiotic resistance and pathogenicity removal by functionalized microbubbles

The frequent occurrence of epidemics around the world gives rise to increasing concerns of the pollution of pathogens and antibiotic resistant bacteria in water. This study investigated the impacts of virulence factors (VFs) on the removal of antibiotic resistant and pathogenic bacteria from municipal wastewater by ozone-free or ozone-encapsulated Fe(III)-coagulant-modified colloidal microbubbles (O3_free-CCMBs or O3-CCMBs). The highly interface-dependent process was initiated with cell-capture on the microbubble surface where the as-collected cells could be further inactivated with the bubble-released ozone and oxidative species if O3-CCMBs were used. The microbiome sequencing analyses denote that the O3_free-CCMB performance of antibiotic resistant and pathogenic bacteria removal was dependent on the virulence phenotypes related to cell-surface properties or structures. The adhesion-related VFs facilitated the effective attachment between cells and the coagulant-modified bubble-surface, which further enhanced cell inactivation by bubble-released ozone. On the contrary, the motility-related VFs might help cells to escape from the bubble capture by locomotion; however, this could be overcome by O3-CCMB-induced oxidative demolition of the movement structures. Besides, the microbubble performance was also impacted with the cell-membrane structure related to antibiotic resistance (i.e., efflux pumps) and the dissolved organic matter through promoting the surface-capture and decreasing the oxidation efficacy. The ozone-encapsulated microbubbles with surface functionalization are robust and promising tools in hampering antibiotic resistance and pathogenicity dissemination from wastewater to surface water environment; and awareness should be raised for the influence of virulence signatures on its performance.

Efficient Degradation of Intracellular Antibiotic Resistance Genes by Photosensitized Erythrosine-Produced 1O2

Intracellular antibiotic resistance genes (iARGs) constitute the important part of wastewater ARGs and need to be efficiently removed. However, due to the dual protection of intracellular DNA by bacterial membranes and the cytoplasm, present disinfection technologies are largely inefficient in iARG degradation. Herein, we for the first time found that erythrosine (ERY, an edible dye) could efficiently degrade iARGs by producing abundant 1O2 under visible light. Seven log antibiotic-resistant bacteria were inactivated within only 1.5 min, and 6 log iARGs were completely degraded within 40 min by photosensitized ERY (5.0 mg/L). A linear relationship was established between ARG degradation rate constants and 1O2 concentrations in the ERY photosensitizing system. Surprisingly, a 3.2-fold faster degradation of iARGs than extracellular ARGs was observed, which was attributed to the unique indirect oxidation of iARGs induced by 1O2. Furthermore, ERY photosensitizing was effective for iARG degradation in real wastewater and other photosensitizers (including Rose Bengal and Phloxine B) of high 1O2 yields could also achieve efficient iARG degradation. The findings increase our knowledge of the iARG degradation preference by 1O2 and provide a new strategy of developing technologies with high 1O2 yield, like ERY photosensitizing, for efficient iARG removal.

Fenton oxidation treatment of oxytetracycline fermentation residues: Harmless performance and bioresource properties

The pharmaceutical factories of oxytetracycline (OTC) massively produce OTC fermentation residues (OFRs). The high content of residual OTC and antibiotic resistance genes in OFRs must to be considered and controlled at an acceptable level. This study therefore investigated the applicability of Fenton oxidation in OTC degradation and resistant gene inactivation of OFRs. The results revealed that Fe²⁺ as catalyzer could very rapidly activate H₂O₂ to produce HO^•, leading to instantaneous degradation of OTC. The optimum conditions for OTC removal were 60 mM H₂O₂ and 140 mg/L Fe²⁺ under pH 7. After Fenton oxidation treatment, the release of water-soluble polysaccharides, NO₃-N, and PO₄-P was enhanced, whereas for proteins and NH₃-N were reduced. Three soluble fluorescence components (humic, tryptophan-like, and humic acid-like substances) were identified through fluorescence spectra with parallel factor analysis, and their reduction exceeded 50% after Fenton oxidation. There were twelve intermediates and three degradation pathways of OTC in OFRs during Fenton process. According to toxicity prediction, the comprehensive toxicity of OTC in OFRs was alleviated via Fenton oxidation treatment. In addition, Fenton oxidation showed the ability to reduce antibiotic resistance genes and mobile genetic elements, and even tetO, tetG, intI1, and intI2 were eliminated completely. These results suggested that Fenton oxidation treatment could be an efficient strategy for removing OTC and resistance genes in OFRs.

Simultaneous removal of antibiotics and antibiotic resistance genes in wastewater by a novel nonthermal plasma/peracetic acid combination system: Synergistic performance and mechanism

In this study, a novel and green method combining plasma with peracetic acid (plasma/PAA) was developed to simultaneously remove antibiotics and antibiotic resistance genes (ARGs) in wastewater, which achieves significant synergistic effects in the removal efficiencies and energy yield. At a plasma current of 2.6 A and PAA dosage of 10 mg/L, the removal efficiencies of most detected antibiotics in real wastewater exceeded 90 % in 2 min, with the ARG removal efficiencies ranging from 6.3 % to 75.2 %. The synergistic effects of plasma and PAA could be associated with the motivated production of reactive species (including •OH, •CH₃, ¹O₂, ONOO^-, •O₂^- and NO•), which decomposed antibiotics, killed host bacteria, and inhibited ARG conjugative transfer. In addition, plasma/PAA also changed the contributions and abundances of ARG host bacteria and downregulated the corresponding genes of two-component regulatory systems, thus reducing ARG propagation. Moreover, the weak correlations between the removal of antibiotics and ARGs highlights the commendable performance of plasma/PAA in the simultaneous removal of antibiotics and ARGs. Therefore, this study affords an innovative and effective avenue to remove antibiotics and ARGs, which relies on the synergistic mechanisms of plasma and PAA and the simultaneous removal mechanisms of antibiotics and ARGs in wastewater.

Conjugation transfer of plasma-induced sublethal antibiotic resistance genes under photoreactivation: Alleviation mechanism of intercellular contact

Dissemination of antibiotic resistance genes (ARGs) is a huge challenge worldwide. Information regarding underlying mechanisms of conjugation transfer of sublethal ARGs under photoreactivation is still lacking. In this study, experimental exploration and model prediction were conducted to evaluate the effects of photoreactivation on conjugation transfer of plasma-induced sublethal ARGs. The experimental results showed that reactive species (O₂^-•, ¹O₂, and •OH) generated in the plasma process led to 0.32, 1.45, 3.21, 4.10, and 3.96-log removal for tetC, tetW, bla_TEM-1, aac(3)-II, and intI1 after 8 min treatment at 18 kV, respectively. Their attacks led to breakage and mineralization of ARGs-containing DNA and disturbance of bacterial metabolism. The conjugation transfer frequency increased by 0.58-fold after 48 h of photoreactivation compared with the plasma treatment, as well as the abundances of ARGs and reactive oxygen species levels. The alleviation effects of photoreactivation were independent of cell membrane permeability, but related to promotion of intercellular contact. Ordinary differential equation model predicted that the stabilization time of long-term transfer of ARGs significantly increased by 50 % after photoreactivation compared with the plasma treatment, and the conjugation transfer frequency also increased. This study firstly revealed the mechanisms of conjugation transfer of sublethal ARGs under photoreactivation.

Antimicrobial and the Resistances in the Environment: Ecological and Health Risks, Influencing Factors, and Mitigation Strategies

Antimicrobial contamination and antimicrobial resistance have become global environmental and health problems. A large number of antimicrobials are used in medical and animal husbandry, leading to the continuous release of residual antimicrobials into the environment. It not only causes ecological harm, but also promotes the occurrence and spread of antimicrobial resistance. The role of environmental factors in antimicrobial contamination and the spread of antimicrobial resistance is often overlooked. There are a large number of antimicrobial-resistant bacteria and antimicrobial resistance genes in human beings, which increases the likelihood that pathogenic bacteria acquire resistance, and also adds opportunities for human contact with antimicrobial-resistant pathogens. In this paper, we review the fate of antimicrobials and antimicrobial resistance in the environment, including the occurrence, spread, and impact on ecological and human health. More importantly, this review emphasizes a number of environmental factors that can exacerbate antimicrobial contamination and the spread of antimicrobial resistance. In the future, the timely removal of antimicrobials and antimicrobial resistance genes in the environment will be more effective in alleviating antimicrobial contamination and antimicrobial resistance.

Periodate activation by pyrite for the disinfection of antibiotic-resistant bacteria: Performance and mechanisms

The propagation of antibiotic-resistant bacteria (ARB) greatly endangers the ecological safety and human health. This study employed pyrite (FeS₂, naturally abundant mineral) for periodate (PI) activation to disinfect ARB. FeS₂/PI system could disinfect 1 × 10⁷ CFU mL^-1 of kanamycin-resistant E.coli below the limit of detection in 20 min. Efficient ARB inactivation performance was achieved in pH from 3 to 9, ionic strength from 0 to 300 mM, with HA (0.1-10 mg L^-1) in suspension, and in real water samples including tap water, river water and sewage. FeS₂/PI system could also efficiently disinfect gentamycin-resistant E.coli and Gram-positive B. subtilis. The generated reactive species including Fe(IV), ·O₂^- and ·OH would attack cell membrane and overwhelmed intracellular defense system. The intracellular kanamycin resistance genes in cells would be released and then degraded in FeS₂/PI system. PI preferred to be adsorbed on Fe site of FeS₂ (with lower adsorption energy, more occupancy of bonding state and stronger bonding strength). The subsequent transfer of electron cloud from Fe site to PI would cleave IO bond to generate reactive species. Moreover, FeS₂/PI system could also combine with sand filtration system to efficiently capture and disinfect ARB. Therefore, FeS₂/PI system is a promising approach to inactivate ARB in different scenarios.

Using photocatalyzed-peroxonization to disinfect and denature genetic material of bacterial plasmids present in hospital wastewater

The literature reports the presence of multiresistant microorganisms in wastewater discharged from municipal and hospital wastewater treatment plants (WWTPs). This has led to questions concerning the disinfection efficiency of the treatments applied. Thus, this study aimed to assess the efficiency of different chemical oxidation methods to disinfect and to degrade bacterial plasmids present in hospital wastewaters, to avoid the dispersion of antibiotic resistance genes in the environment. The methods tested were UV_254nm alone or associated with an Ag or Ti-photocatalyst in photo-peroxonization (UV_254 nm/H₂O₂/O₃/Ag₂O/Ag₂CO₃@PU or UV_254 nm/H₂O₂/O₃/TiO₂@PU) under different pH conditions (4, 7, and 10). The application of plasmid DNA electrophoresis to hospital wastewater treated using an advanced oxidation process (AOP) achieved the total structural denaturation of microorganism plasmids at the three pH values tested. Also, UV_254 nm alone was partially efficient in the disinfection of hospital wastewater. AOPs performed with the two functionalized catalysts resulted in 100% disinfection after 10 min at the three pH values tested. No intact plasmids were observed after 20 min of treatment with photocatalysis. This study could contribute to the development and improvement of wastewater treatment aimed at mitigating the spread of multiresistant microorganisms in the environment.

Direct electrochemical determination of environmentally harmful pharmaceutical ciprofloxacin in 3D printed flow-through cell

Rising amounts of antibiotic residues in wastewater cause serious problems including increased bacterial resistance. Wastewater treatment plants (WWTPs) do not, in the case of new, modern pharmaceuticals, ensure their complete removal. Ciprofloxacin (CIP) is one of many micropollutants that partially pass through WWTPs, implying that its monitoring is essential for the assessment of the water quality. In real sewage systems, the determination of CIP needs to be performed under flowing conditions, which calls for the deployment of inexpensive, robust, and easily integrable approaches such as electrochemical techniques. However, to the best of our knowledge, there is no report on the electrochemical determination of CIP in a flowing matrix. To bridge this gap, we perform here cyclic and square-wave voltammetric sensing study of CIP employing boron-doped diamond screen printed electrodes in a custom-made 3D printed flow-through cell to mimic conditions in real sewage systems. An irreversible two-step oxidation of CIP is demonstrated, with the first step providing clear Faradaic response as analytically relevant signal. This response was found to scale with the sample flow rate according to the prediction given by Levich equation. Our work provides an in-depth inspection of the electrochemical response of CIP under controlled-convection conditions, which is an essential prerequisite for monitoring this antibiotic in real flowing sewage systems.

Abatement of paraquat contaminated water using solar assisted heterogeneous photo-Fenton like treatment with iron-containing industrial wastes as catalysts

Owing to the tremendous increase of chemicals for agricultural practices, the quality of water has degraded significantly and requires inevitable attention. With this in mind, present work aims at treating Paraquat (PQ) contaminated water using Fe containing industrial waste as a catalyst via photo-Fenton treatment. Utilizing the industrially generated Fe rich waste by-products i.e., Fly ash (FA), Foundry sand (FS), Red mud (RM), and Blast sand (BS) as catalysts marks the novelty of the work since this idea of using waste for treating waste serves the dual purpose of environment remediation:first by treating wastewater and second by resolving the issue of solid waste disposal. In the present study, 25 mg/L PQ was subjected to both UV and solar radiations in the presence of FeSO₄, FA, FS, RM, and BS as catalysts. The presence of Fe in the catalysts was verified using analytical techniques namely FTIR, FESEM-EDX, and their XRD was also analyzed. The system was further optimized for various parameters and results indicated maximum PQ degradation under UV radiations was attained in the order FeSO₄ (73%) > BS (65%) > FS (46%) > RM (37%) > FA (14%) within 60 min which significantly increased with introduction of solar radiations to 83% for Fe salt and 76% for BS justifying the potential of using waste for treating waste. Further, to enhance the real-life utilization of industrial waste, Fe₂O₃/BS heterojunction (Fe-BS) was synthesized which along with leading to 88% degradation of PQ, also showed 82% COD removal indicating that the catalyst not only degrades the pollutant but also converts it into a lower toxic form. Further, the intermediates formed during the process were analyzed using LCMS.

Natural organic matters promoted conjugative transfer of antibiotic resistance genes: Underlying mechanisms and model prediction

Dissemination of antibiotic resistance gene (ARG) is a huge challenge around the world. Natural organic matter (NOM) is one of the most commonly components in aquatic systems. Information regarding ARG transfer induced by NOM is still lacking. In this study, experimental exploration and model prediction on RP4 plasmid conjugative transfer between bacteria under NOM exposure was conducted. Compared with no exposure, the conjugative transfer frequency of RP4 plasmid increased 7.1-fold and 3.2-fold under exposure to 10 kDa and 100 kDa NOM exposure, respectively. NOM exposure with a lower molecular weight and higher concentration promoted gene expressions related to reactive oxygen species generation, cell membrane permeability, intercellular contact, quorum sensing, and energy driving force. Concurrently, the expressions of conjugation genes in RP4 plasmid were also upregulated. Moreover, model prediction demonstrated that the maintenance of the acquired plasmid was shortened to 133 h under 10 kDa NOM exposure compared with the control (200 h). Long-term NOM exposure enhanced transfer frequency and transfer rate of ARG. This study firstly theoretically and experimentally revealed the underlying mechanisms for promoting ARG transfer by NOM.

Metagenomic analysis reveals the diversity and distribution of antibiotic resistance genes in thermokarst lakes of the Yellow River Source Area

Thermokarst lakes form as the results of ice-rich permafrost thawing and act as important water resources in cold regions. However, the distributions of antibiotic resistance genes (ARGs) in thermokarst lakes are far less studied. Using metagenomic sequencing approach, we provided the first study to document ARGs in thermokarst lakes of the Yellow River Source Area on the Qinghai-Tibet Plateau (QTP). The results revealed that both sediment and water of the thermokarst lakes harbor diverse ARGs. Multidrug resistance genes were the most diverse, while rifamycin resistance genes were the most abundant with rpoB2 and rpoB genes having the highest proportion. Sediment samples contained more ARGs than water samples, but their composition differed between the two types of samples. However, the composition variations of sediment and water ARGs were closely correlated. The Sorensen dissimilarities of ARGs were controlled by strong turnover processes in sediment samples, and by turnover and nestedness in water samples. High contributions of nestedness were found between sediment and water samples. Moreover, ARGs in water had more significant relationships with environmental variables than that in sediment. Given the role of thermokarst lakes as important water resources in permafrost landscape, as well as intensifying influences of climate change and anthropogenetic activities, thermokarst lakes could bring potential ARG risks, warranting further investigation and evaluation.

Inactivation of a pathogenic NDM-1-positive Escherichia coli strain and the resistance gene blaNDM-1 by TiO2/UVA photocatalysis

Proliferation of bla_NDM-1 in water and wastewater is particularly concerning because of multidrug-resistance and horizontal transfer of the gene. In the present study, a pathogenic NDM-1-positive Escherichia coli strain (named E. coli NDM-1) and the bla_NDM-1 gene were treated with titanium dioxide (TiO₂)/ultraviolet A (UVA) photocatalysis. Effects of catalyst dose, UVA intensity, and phosphate on bacteria and intracellular and extracellular bla_NDM-1 genes were determined. With increases in TiO₂ dose and UVA intensity, the inactivation rate of E. coli NDM-1 increased greatly in saline solution. However, phosphate in water hindered adsorption of bacteria to TiO₂ and partly changed the TiO₂ photocatalytic pathway, resulting in low degradation efficiency. Although inactivation of E. coli NDM-1 was highly efficient, TiO₂/UVA photocatalysis had little effect on removal of the bla_NDM-1 gene. During the 2-h photocatalytic experiments, E. coli cells decreased by 4.7-log, while the bla_NDM-1 gene decreased by 0.7- ~ 1.5-log. Moreover, the degradation rate of extracellular bla_NDM-1 was ~2.7 times higher than that of intracellular genes. Abundance and transformation frequency of residual bla_NDM-1 genes remained high, even when bacteria were completely inactivated, indicating potential health risks. Increases in treatment time and UVA irradiation intensity are needed to remove the bla_NDM-1 gene to sufficiently low levels.

Effective control of antibiotic resistance using a sonication-based combinational treatment and its application to fresh food

Antibiotics have been widely used to treat several infectious diseases. However, the overuse of antibiotics has promoted the emergence and spread of antibiotic resistant bacteria (ARB) in various fields, including the food industry. In this study, the antimicrobial efficacies of two conventional sterilization methods, mild heat, and sonication, were evaluated and optimized to develop a new strategy against ARB. Simultaneous mild heat and sonication (HS) treatment led to a significant reduction in viable cell counts, achieving a 5.58-log reduction in 4 min. However, no remarkable decrease in viable cell counts was observed in individually treated groups. Interestingly, the release of antibiotic resistance genes (ARGs) increased in a time-dependent manner in the heat-treated and HS-treated groups. The inactivation levels of ARGs increased as the HS treatment time increased from 2 to 8 min, and most ARGs were degraded after 8 min. In contrast, no significant inactivation of ARGs was observed in the heat-treated and sonication-treated groups after 8 min. These results reveal the synergistic effect of the combination treatment in controlling not only ARB but also ARGs. Finally, on applying this newly developed combination treatment to fresh food (cherry tomato and carrot juice), 3.97- and 4.28-log microbial inactivation was achieved, respectively. In addition, combination treatment did not affect food quality during storage for 5 days. Moreover, HS treatment effectively inactivated ARGs in fresh food systems.

Simultaneous Removal of Antibiotic Resistant Bacteria, Antibiotic Resistance Genes, and Micropollutants by FeS2@GO-Based Heterogeneous Photo-Fenton Process

The co-occurrence of various chemical and biological contaminants of emerging concerns has hindered the application of water recycling. This study aims to develop a heterogeneous photo-Fenton treatment by fabricating nano pyrite (FeS₂) on graphene oxide (FeS₂@GO) to simultaneously remove antibiotic resistant bacteria (ARB), antibiotic resistance genes (ARGs), and micropollutants (MPs). A facile and solvothermal process was used to synthesize new pyrite-based composites. The GO coated layer forms a strong chemical bond with nano pyrite, which enables to prevent the oxidation and photocorrosion of pyrite and promote the transfer of charge carriers. Low reagent doses of FeS₂@GO catalyst (0.25 mg/L) and H₂O₂ (1.0 mM) were found to be efficient for removing 6-log of ARB and 7-log of extracellular ARG (e-ARG) after 30 and 7.5 min treatment, respectively, in synthetic wastewater. Bacterial regrowth was not observed even after a two-day incubation. Moreover, four recalcitrant MPs (sulfamethoxazole, carbamazepine, diclofenac, and mecoprop at an environmentally relevant concentration of 10 μg/L each) were completely removed after 10 min of treatment. The stable and recyclable composite generated more reactive species, including hydroxyl radicals (HO^•), superoxide radicals (O₂^• -), singlet oxygen (¹O₂). These findings highlight that the synthesized FeS₂@GO catalyst is a promising heterogeneous photo-Fenton catalyst for the removal of emerging contaminants.

Electroactive Ultrafiltration Membrane for Simultaneous Removal of Antibiotic, Antibiotic Resistant Bacteria, and Antibiotic Resistance Genes from Wastewater Effluent

To combat the spread of antibiotic resistance into the environment, we should adequately manage wastewater effluent treatment to achieve simultaneous removal of antibiotics, antibiotic resistant bacteria (ARB), and antibiotic resistance genes (ARGs). Herein, we fabricate a multifunctional electroactive poly(vinylidene fluoride) ultrafiltration membrane (C/PVDF) by phase inversion on conductive carbon cloth. The membrane possesses not only excellent retention toward ARB and ARGs but also exhibits high oxidation capacity as an electrode. Notably, sulfamethoxazole degradation involving hydroxylation and hydrolysis by the anode membrane is predominant, and the degradation efficiency is up to 81.5% at +4 V. Both electro-filtration processes exhibit significant ARB inactivation, anode filtration is superior to cathode filtration. Moreover, the degradation of intracellular ARGs (iARGs) located in the genome is more efficient than those located in the plasmid, and these degradation efficiencies at -2 V are higher than +2 V. The degradation efficiencies of extracellular ARGs (eARGs) are opposite and are lower than iARGs. Compared with regular filtration, the normalized flux of electroactive ultrafiltration membrane is improved by 18.0% at -2 V, 15.9% at +2 V, and 30.4% at +4 V during treating wastewater effluent, confirming its antifouling properties and feasibility for practical application.

The combined effect of an integrated reclaimed water system on the reduction of antibiotic resistome

The reuse of urban reclaimed water is conducive to alleviate the current serious shortage of water resources. However, antibiotic resistance genes (ARGs) in reclaimed water have received widespread attention due to their potential risks to public health. Deciphering the fate of ARGs in reclaimed water benefits the development of effective strategies to control resistome risk and guarantees the safety of water supply of reclaimed systems. In this study, the characteristics of ARGs in an integrated reclaimed water system (sewage treatment plant-constructed wetland, STP-CW) in Beijing (China) have been identified using metagenomic assembly-based analysis, as well as the combined effect of the STP-CW system on the reduction of antibiotic resistome. Results showed a total of 29 ARG types and 813 subtypes were found in the reclaimed water system. As expected, the STP-CW system improved the removal of ARGs, and about 58% of ARG subtypes were removed from the effluent of the integrated STP-CW system, which exceeded 43% for the STP system and 37% for the CW system. Although the STP-CW system had a great removal on ARGs, abundant and diverse ARGs were still found in the downstream river. Importantly, network analysis revealed the co-occurrence of ARGs, mobile genetic elements and virulence factors in the downstream water, implying potential resistome dissemination risk in the environment. Source identification with SourceTracker showed the STP-effluent was the largest contributor of ARGs in the downstream river, with a contribution of 45%. Overall, the integrated STP-CW system presented a combined effect on the reduction of antibiotic resistome, however, the resistome dissemination risk was still non-negligible in the downstream reclaimed water. This study provides a comprehensive analysis on the fate of ARGs in the STP-CW-river system, which would benefit the development of effective strategies to control resistome risk for the reuse of reclaimed water.

Vis LED Photo-Fenton Degradation of 124-Trichlorobenzene at a Neutral pH Using Ferrioxalate as Catalyst

Chlorinated organic compounds (COCs) are among the more toxic organic compounds frequently found in soil and groundwater. Among these, toxic and low-degradable chlorobenzenes are commonly found in the environment. In this work, an innovative process using hydrogen peroxide as the oxidant, ferrioxalate as the catalyst and a visible light-emitting diode lamp (Vis LED) were applied to successfully oxidize 124-trichlorobenzene (124-TCB) in a saturated aqueous solution of 124-TCB (28 mg L^-1) at a neutral pH. The influence of a hydrogen peroxide (HP) concentration (61.5-612 mg L^-1), Fe³⁺ (Fe) dosage (3-10 mg L^-1), and irradiation level (Rad) (I = 0.12 W cm^-2 and I = 0.18 W cm^-2) on 124-TCB conversion and dechlorination was studied. A D-Optimal experimental design combined with response surface methodology (RSM) was implemented to maximize the quality of the information obtained. The ANOVA test was used to assess the significance of the model and its coefficients. The maximum pollutant conversion at 180 min (98.50%) was obtained with Fe = 7 mg L^-1, HP = 305 mg L^-1, and I = 0.12 W cm^-2. The effect of two inorganic anions usually presents in real groundwater (bicarbonate and chloride, 600 mg L^-1 each) was investigated under those optimized operating conditions. A slight reduction in the 124-TCB conversion after 180 min of reaction was noticed in the presence of bicarbonate (8.31%) and chloride (7.85%). Toxicity was studied with Microtox® (Azur Environmental, Carlsbad, CA, USA) bioassay, and a remarkable toxicity decrease was found in the treated samples, with the inhibition proportional to the remaining 124-TCB concentration. That means that nontoxic byproducts are produced in agreement with the high dechlorination degrees noticed.

The effects of biochar on antibiotic resistance genes (ARGs) removal during different environmental governance processes: A review

Antibiotic resistance genes (ARGs) pollution has been considered as one of the most significant emerging environmental and health challenges in the 21st century, many efforts have been paid to control the proliferation and dissemination of ARGs in the environment. Among them, the biochar performs a positive effect in reducing the abundance of ARGs during different environmental governance processes and has shown great application prospects in controlling the ARGs. Although there are increasing studies on employing biochar to control ARGs, there is still a lack of review paper on this hotspot. In this review, firstly, the applications of biochar to control ARGs in different environmental governance processes were summarized. Secondly, the processes and mechanisms of ARGs removal promoted by biochar were proposed and discussed. Then, the effects of biochar properties on ARGs removal were highlighted. Finally, the future prospects and challenges of using biochar to control ARGs were proposed. It is hoped that this review could provide some new guidance for the further research of this field.

Intracellular and extracellular protective mechanisms of the anammox consortia against exogenous sulfadimidine

Antibiotics and antibiotic resistance genes (ARGs) have been recognized as emerging high-risk pollutants for human and animal health. This study systematically investigated the comprehensive effects of a typical antibiotic (sulfadimidine, SDM) in livestock and poultry breeding wastewater on the anammox process, with the aim of elucidating the intracellular and extracellular protective mechanisms of the anammox consortia to the antibiotic stress. Results revealed that the high-concentration SDM significantly reduced the specific anammox activity (SAA) by 37.8%. Changes in the abundance of Candidatus Kuenenia showed a similar trend with that of SAA, while other nitrogen-related microorganisms (e.g., Nitrosomonas and Nitrospira) contributed to the nitrogen removal especially during the inhibitory period. Resistance of the anammox consortia to SDM mainly depended on the protection of ARGs and EPS. Network analysis revealed the host range of eARGs was relatively larger than that of iARGs, and intI1 was closely associated with representative denitrifiers. In addition, metaproteomic analysis and molecular docking results indicated that abundant proteins in EPS could detain SDM in the extracellular matrix through forming complex via hydrogen bond. These findings provide a guidance for the stable operation of anammox process and ARGs transfer controlling.

Response mechanisms of different antibiotic-resistant bacteria with different resistance action targets to the stress from photocatalytic oxidation

The stress response of antibiotic-resistant bacteria (ARB) and the spread of antibiotic resistance genes (ARGs) pose a serious threat to the aquatic environment and human beings. This study mainly explored the effect of the heterogeneous photocatalytic oxidation (UVA-TiO₂ system) on the stress response mechanism of ARB with different antibiotic resistance action targets, including the cell wall, proteins, DNA, RNA, folate and the cell membrane. Results indicate that the stress response mechanism of tetracycline- and sulfamethoxazole-resistant E. coli DH5α, which targets the synthesis of protein and folate, could rapidly induce global regulators by the overexpression of relative antibiotic resistance action target genes. Different stress response systems were mediated via cross-protection mechanism, causing stronger tolerance to an adverse environment than other ARB. Moreover, the photocatalytic inactivation mechanism of bacterial cells and a graded response of cellular stress mechanism caused differences in the intensity of the stress mechanism of antibiotic resistance action targets. E. coli DH5α resistant to cefotaxime and polymyxin, targeting synthesis of the cell wall and cell membrane, respectively, could confer greater advantages to bacterial survival and higher conjugative transfer frequency than E. coli DH5α resistant to nalidixic acid and rifampicin, which target the synthesis of DNA and RNA, respectively. This new perspective provides detailed information on the practical application of photocatalytic oxidation for inactivating ARB and hampering the spreading of ARGs in the aquatic environment.

Simultaneous removal of antibiotic resistant bacteria and antibiotic resistance genes by molybdenum carbide assisted electrochemical disinfection

Considering conventional disinfection methods are not effective in simultaneously removing ARB and ARGs, a novel electrochemical disinfection (ED) process assisted by molybdenum carbide (Mo₂C) electrodes was developed in this study. The established ED process was proved to effectively inactivate multi-resistant ARB (i.e. Escherichia coli K-12 LE392 with resistance to kanamycin, ampicillin, and tetracycline) and to degrade ARGs (including tetA and bla_TEM in the form of both intracellular (iARGs) and extracellular ARGs (eARGs)). Specifically, within 15 min treatment by the Mo₂C-assisted ED under 2.0 V, a 5-log ARB removal was realized, without any ARB regrowth observed, indicating a permanent inactivation of ARB by the process. Moreover, degradation of the iARGs (0.4-log reduction of the bla_TEM and 3.1-log reduction of the tetA) and the eARGs (4.2-log reduction of the bla_TEM and 1.1-log reduction of the tetA) were achieved within 60 min, further underpinning the viability of the Mo₂C-based ED. While e^-, H₂O₂, and •O₂^- played leading roles in the entire process of ED, H⁺ and •OH contributed to bacterial inactivation in the early and late stages of ED, respectively. The reactive species induced by electrolysis posed pressure to the ARB strains, which enhanced oxidative stress response, triggered higher reactive oxygen species generation, induced membrane damage and changed cellular structure. Collectively, the Mo₂C-assisted ED demonstrated in the present study represents an attractive alternative to the traditional disinfection methods in combating the spread of antibiotic resistance.

Degradation of Bacterial Antibiotic Resistance Genes during Exposure to Non-Thermal Atmospheric Pressure Plasma

Bacterial resistance to antibiotics has become a major public health problem in recent years. The occurrence of antibiotics in the environment, especially in wastewater treatment plants, has contributed to the development of antibiotic-resistant bacteria (ARB) and the spread of antibiotic resistance genes (ARGs). Despite the potential of some conventional processes used in wastewater treatment plants, the removal of ARB and ARGs remains a challenge that requires further research and development of new technologies to avoid the release of emerging contaminants into aquatic environments. Non-thermal atmospheric pressure plasmas (NTAPPs) have gained a significant amount of interest for wastewater treatment due to their oxidizing potential. They have shown their effectiveness in the inactivation of a wide range of bacteria in several fields. In this review, we discuss the application of NTAPPs for the degradation of antibiotic resistance genes in wastewater treatment.

Free radicals removing extracellular polymeric substances to enhance the degradation of intracellular antibiotic resistance genes in multi-resistant Pseudomonas Putida by UV/H2O2 and UV/peroxydisulfate disinfection processes

UV-based advanced oxidation processes (UV-AOPs) have been recommended to disinfect wastewater treatment plant (WWTP) effluents to control the dissemination of antibiotic resistance, but the mechanism of intracellular antibiotic resistance genes (i-ARGs) degradation by UV-AOPs is still poorly understood. Here we compared the efficacies of UV, UV/H₂O₂, and UV/PDS in degrading seven i-ARGs carried by a multi-drug resistant P. putida MX-2 isolated from sewage sludge and investigated the roles of free radicals and UV irradiation in degrading the carried i-ARGs in UV-AOPs. The results suggested that although UV/H₂O₂ and UV/PDS were only slightly superior to UV to inactivate P. putida MX-2, they significantly promoted the degradation of i-ARGs. The generated free radicals mainly reacted with the bacterial extracellular polymeric substances (EPS), increased the cell membrane permeability of bacteria, and consequently facilitated UV irradiation enter into the intracellular environment to damage the i-ARGs, thus enhancing their degradation during UV-AOPs processes. Our findings suggested that the removal of bacterial EPS by free radicals greatly contributed to the degradation of i-ARGs by UV irradiation in UV-AOPs, and more efficient approaches that are capable of removing EPS should be further developed to effectively control the dissemination of antibiotic resistance by UV treatment of wastewater effluent.

Roles of reactive oxygen species in antibiotic resistant bacteria inactivation and micropollutant degradation in Fenton and photo-Fenton processes

Reactive oxygen species play a critical role in degrading chemical or biological contaminants in advanced oxidation processes. However, it is still not clear whether conventional Fenton and photo-Fenton processes generate different reactive oxygen species, respectively. This study revealed the roles of reactive oxygen species (ROS) for simultaneous removal of antibiotic resistant bacteria (ARB) and recalcitrant micropollutant using three processes, i.e., conventional Fenton, photo-Fenton, and ethylenediamine-N, N'-disuccinic acid (EDDS) modified photo-Fenton. Both chemical scavengers and electron paramagnetic resonance spectroscopy confirmed the generation of various ROS and their contribution towards bacterial inactivation and micropollutant degradation. Results showed ARB and carbamazepine (CBZ) elimination efficiency in the order: EDDS modified photo-Fenton process > photo-Fenton process > Fenton process. The ARB detection limit (6-log ARB) was observed within 10 min at lower doses of 0.1 mM Fe³⁺, 0.2 mM EDDS, and 0.5 mM hydrogen peroxide (H₂O₂). With the same dose, it took longer (60 min) to remove CBZ, while 2.5 times higher H₂O₂ dose (1.25 mM) removed around 99% of CBZ within 10 min treatment. The present study highlighted that the hydroxyl radical (HO^•) plays a dominant role, while singlet oxygen (¹O₂) and superoxide radical anion (O₂^•-) exhibit moderate effects to remove the hazards. Our findings provide mechanistic insights into the role of various reactive oxygen species on degrading micropollutants and inactivating ARB.

Migration of antibiotic resistance genes and evolution of flora structure in the Xenopus tropicalis intestinal tract with combined exposure to roxithromycin and oxytetracycline

The intestinal flora is one of the most important environments for antibiotic resistance development, owing to its diverse mix of bacteria. An excellent medicine model organism, Xenopus tropicalis, was selected to investigate the spread of antibiotic resistance genes (ARGs) in the intestinal bacterial community with single or combined exposure to roxithromycin (ROX) and oxytetracycline (OTC). Seventeen resistance genes (tetA, tetB, tetE, tetM, tetO, tetS, tetX, ermF, msrA, mefA, ereA, ereB, mphA, mphB, intI1, intI2, intI3) were detected in the intestines of Xenopus tropicalis living in three testing tanks (ROX tanks, OTC tanks, ROX + OTC tanks) and a blank tank for 20 days. The results showed that the relative abundance of total ARGs increased obviously in the tank with single stress but decreased in the tank with combined stress, and the genes encoding the macrolide antibiotic efflux pump (msrA), phosphatase (mphB) and integron (intI2, intI3) were the most sensitive. With the aid of AFM scanning, DNA was found to be scattered short chain in the blank, became extended or curled and then compacted with the stress from a single antibiotic, and was compacted and then fragmented with combined stress, which might be the reason for the variation of the abundance of ARGs with stress. The ratio of Firmicutes/Bacteroides related to diseases was increased by ROX and OTC. The very significant correlation between intI2 and intI3 with tetS (p ≤ 0.001) hinted at a high risk of ARG transmission in the intestines. Collectively, our results suggested that the relative abundance of intestinal ARGs could be changed depending on the intestinal microbiome and DNA structures upon exposure to antibiotics at environmental concentrations.

Does light-based tertiary treatment prevent the spread of antibiotic resistance genes? Performance, regrowth and future direction

The common occurrence of antibiotic-resistance genes (ARGs) originating from pathogenic and facultative pathogenic bacteria pose a high risk to aquatic environments. Low removal of ARGs in conventional wastewater treatment processes and horizontal dissemination of resistance genes between environmental bacteria and human pathogens have made antibiotic resistance evolution a complex global health issue. The phenomenon of regrowth of bacteria after disinfection raised some concerns regarding the long-lasting safety of treated waters. Despite the inactivation of living antibiotic-resistant bacteria (ARB), the possibility of transferring intact and liberated DNA containing ARGs remains. A step in this direction would be to apply new types of disinfection methods addressing this issue in detail, such as light-based advanced oxidation, that potentially enhance the effect of direct light interaction with DNA. This study is devoted to comprehensively and critically review the current state-of-art for light-driven disinfection. The main focus of the article is to provide an insight into the different photochemical disinfection methods currently being studied worldwide with respect to ARGs removal as an alternative to conventional methods. The systematic comparison of UV/chlorination, UV/H₂O₂, sulfate radical based-AOPs, photocatalytic processes and photoFenton considering their mode of action on molecular level, operational parameters of the processes, and overall efficiency of removal of ARGs is presented. An in-depth discussion of different light-dependent inactivation pathways, influence of DBP and DOM on ARG removal and the potential bacterial regrowth after treatment is presented. Based on presented revision the risk of ARG transfer from reactivated bacteria has been evaluated, leading to a future direction for research addressing the challenges of light-based disinfection technologies.