Polystyrene microplastics accelerated photodegradation of co-existed polypropylene via photosensitization of polymer itself and released organic compounds

Application of FTIR two-dimensional correlation spectroscopy (2D-COS) analysis in characterizing environmental behaviors of microplastics: A systematic review

Microplastics (MPs) are ubiquitous in the environment, continuously undergo aging processes and release toxic chemical substances. Understanding the environmental behaviors of MPs is critical to accurately evaluate their long-term ecological risk. Generalized two-dimensional correlation spectroscopy (2D-COS) is a powerful tool for MPs studies, which can dig more comprehensive information hiding in the conventional one-dimensional spectra, such as infrared (IR) and Raman spectra. The recent applications of 2D-COS in analyzing the behaviors and fates of MPs in the environment, including their aging processes, and interactions with natural organic matter (NOM) or other chemical substances, were summarized systematically. The main requirements and limitations of current approaches for exploring these processes are discussed, and the corresponding strategies to address these limitations and drawbacks are proposed as well. Finally, new trends of 2D-COS are prospected for analyzing the properties and behaviors of MPs in both natural and artificial environmental processes.

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Hydrophilic Fraction of Dissolved Organic Matter Largely Facilitated Microplastics Photoaging: Insights from Redox Properties and Reactive Oxygen Species

Dissolved organic matter (DOM) exists widely in natural water, which inevitably influences microplastic (MP) photoaging. Nevertheless, the impacts of DOM fractions with diverse molecular structures on MP photoaging remain to be elucidated. This study explored the photoaging mechanisms of polylactic acid (PLA)-MPs and polystyrene (PS)-MPs in the presence of DOM and its subfractions (hydrophobic acid (HPOA), hydrophobic neutral (HPON), and hydrophilic (HPI)). Across DOM fractions, HPI exhibited the highest electron accepting capacity (23 μmol e- (mg C)-1) due to its abundant tannin-like species (36.8%) with carboxylic groups, which facilitated more reactive oxygen species generation (particularly hydroxyl radical), leading to the strongest photoaging rate of two MPs by HPI. However, the sequences of bond cleavage during photoaging of each MPs were not clearly shifted as revealed by two-dimensional infrared correlation spectra. Inconspicuous effects on the extent of PS- and PLA-MPs photoaging were observed for HPOA and HPON, respectively. This was mainly ascribed to the occurrence of inhibitory mechanisms (e.g., light-shielding and quenching effect) counteracting the reactive oxygen species-promoting effects. The findings identified the HPI fraction of DOM for promoting PS- and PLA-MPs photoaging rate and first constructed a link among DOM molecular structures, redox properties, and effects on MP photoaging.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Photodegradation of Microplastics through Nanomaterials: Insights into Photocatalysts Modification and Detailed Mechanisms

Microplastics (MPs) pose a profound environmental challenge, impacting ecosystems and human health through mechanisms such as bioaccumulation and ecosystem contamination. While traditional water treatment methods can partially remove microplastics, their limitations highlight the need for innovative green approaches like photodegradation to ensure more effective and sustainable removal. This review explores the potential of nanomaterial-enhanced photocatalysts in addressing this issue. Utilizing their unique properties like large surface area and tunable bandgap, nanomaterials significantly improve degradation efficiency. Different strategies for photocatalyst modification to improve photocatalytic performance are thoroughly summarized, with a particular emphasis on element doping and heterojunction construction. Furthermore, this review thoroughly summarizes the possible fundamental mechanisms driving the photodegradation of microplastics facilitated by nanomaterials, with a focus on processes like free radical formation and singlet oxygen oxidation. This review not only synthesizes critical findings from existing studies but also identifies gaps in the current research landscape, suggesting that further development of these photocatalytic techniques could lead to substantial advancements in environmental remediation practices. By delineating these novel approaches and their mechanisms, this work underscores the significant environmental implications and contributes to the ongoing development of sustainable solutions to mitigate microplastic pollution.

Interactions between methyl octabromo ether flame retardant and expanded polystyrene microplastics in the photoaging process

Expanded polystyrene (EPS) plastic is widely used because of its low density and lightweight properties, enabling it to float on water and increase its exposure to sunlight. In this study, we simulated the photoaging process of flame retardant-added EPS (FR-EPS) and common original EPS (OR-EPS) microplastic (MP) particles with and without methyl octabromoether flame retardant (MOBE) in the laboratory to explore the effect of MOBE on the photodegradation of EPS. Results showed that MOBE accelerated size reduction and surface hole formation on the particles, hastening the shedding and replacement of particle surfaces. FR-EPS particles exhibited a weight loss exceeding that of OR-EPS, reaching 40.85 ± 3.72% after 36 days of irradiation. Moreover, rapid physical peeling of the FR-EPS surface was accompanied by continuous chemical oxidation and fluctuations of the carbonyl index and O/C ratio. A diffusion model based on Fick's second law fitted well for the concentration of MOBE remaining in FR-EPS particles. MOBE's sensitivity to direct photochemical reactions inhibited the early-stage photoaging of EPS MP particles by competing for photons. However, MOBE as chromophores could absorb photons and produce •OH to promote the aging of EPS. Moreover, the capacity of EPS to absorb light energy also accelerated MOBE degradation. These findings suggested that the photoaging behavior of commercial EPS products containing flame retardants in the environment is quite different from that of pure EPS, indicating that additive-plastic interactions significantly alter MP fate and environmental risks.

A Review of Weathering Studies in Plastics and Biocomposites-Effects on Mechanical Properties and Emissions of Volatile Organic Compounds (VOCs)

Polymeric materials undergo degradation when exposed to outdoor conditions due to the synergistic effects of sunlight, air, heat, and moisture. The degradation can lead to a decline in mechanical properties, fading, surface cracking, and haziness, attributed to the cleavage of the polymer chains and oxidation reactions. Accelerated weathering testing is a useful technique to evaluate the comparative photodegradation of materials within a reasonable timeframe. This review gives an overview of the different degradation mechanisms occurring in conventional plastics and bio-based materials. Case studies on accelerated weathering and its effect on the mechanical properties of conventional plastics and biocomposites are discussed. Different techniques for analysing volatile organic emissions (VOCs) have been summarized and studies highlighting the characterization of VOCs from aged plastics and biocomposites after aging have been cited.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

Innovative overview of the occurrence, aging characteristics, and ecological toxicity of microplastics in environmental media

Microplastics (MPs), pollutants detected at high frequency in the environment, can be served as carriers of many kinds of pollutants and have typical characteristics of environmental persistence and bioaccumulation. The potential risks of MPs ecological environment and health have been widely concerned by scholars and engineering practitioners. Previous reviews mostly focused on the pollution characteristics and ecological toxicity of MPs, but there were few reviews on MPs analysis methods, aging mechanisms and removal strategies. To address this issue, this review first summarizes the contamination characteristics of MPs in different environmental media, and then focuses on analyzing the detection methods and analyzing the aging mechanisms of MPs, which include physical aging and chemical aging. Further, the ecotoxicity of MPs to different organisms and the associated enhanced removal strategies are outlined. Finally, some unresolved research questions related to MPs are prospected. This review focuses on the ageing and ecotoxic behaviour of MPs and provides some theoretical references for the potential environmental risks of MPs and their deep control.

Self-motivated photoaging of microplastics by biochar-dissolved organic matter under different pyrolysis temperatures

Dissolved organic matter (DOM) released from biochar (BDOM) can interact with microplastics (MPs) in the environment, inevitably affecting their environmental behaviour. Information regarding the influence of BDOM on MPs during photoaging and associated variations in the MP aging mechanism remains unclear. This study evaluated the effect of BDOM on the aging of polystyrene (PS) MPs. The results showed that among three pyrolysis temperatures, low-temperature BDOM significantly enhanced the photoaging process of PS MPs, with the smallest average particle size and highest carbonyl index value after 15 days of aging under light conditions. The DOM level decreased after 5 days, increased after 5-10 days, and stabilised after 15 d. BDOM accelerates PS MPs aging, leading to more DOM released from PS, which can be transformed into 1O2 via triplet-excited state (3DOM⁎ and 3PS⁎) to further enhance PS MPs aging, resulting in the realisation of the self-accelerated aging process of PS MPs. 1O2 plays a crucial role in the self-motivated accelerated aging process of PS MPs. These findings provide new insights into the effects of the DOM structure and composition on reactive oxygen species generation during MPs aging.

Effect of microplastics on urban wastewater disinfection and impact on effluent reuse: Sunlight/H2O2 vs solar photo-Fenton at neutral pH

The interference of three types of microplastics (MPs) on the inactivation of Escherichia coli (E. coli) by advanced oxidation processes (AOPs) (namely, sunlight/H2O2 and solar photo-Fenton (SPF) with Ethylenediamine-N,N'-disuccinic acid (EDDS)), in real secondary treated urban wastewater was investigated for the first time. Inactivation by sunlight/H2O2 treatment decreased as MPs concentration and H2O2 dose were increased. Noteworthy, an opposite behaviour was observed for SPF process where inactivation increased as MPs concentration was increased. Biofilm formation and microbial attachment on surfaces of post-treated MPs were observed on polyethylene (PE) and polyvinyl chloride (PVC) MPs by field emission scanning electron microscopy. In presence of PE MPs, a complete inactivation of E. Coli was achieved by SPF with EDDS (Fe:EDDS = 1:2) after 90 min treatment unlike of sunlight/H2O2 treatment (∼4.0 log reduction, 40 mg/L H2O2 dose, 90 min treatment). The lower efficiency of sunlight/H2O2 process could be attributed to the blocking/scattering effect of MPs on sunlight, which finally reduced the intracellular photo Fenton effect. A reduced E. coli regrowth was observed in presence of MPs. SPF (Fe:EDDS = 1:1) with PE MPs was less effective in controlling bacterial regrowth (∼120 CFU/100 mL) than sunlight/H2O2 (∼10 CFU/100 mL) after 48 h of post-treatment. These results provide useful information about possible interference of MPs on urban wastewater disinfection by solar driven AOPs and possible implications for effluent reuse.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Deciphering fluorescent and molecular fingerprint of dissolved organic matter leached from microplastics in water

Despite extensive research into the presence and behavior of microplastics (MPs) in the environment, limited attention has been given to the investigation of the characteristics of dissolved organic matter (DOM) that leaches from MPs (MPs-DOM). Herein, two frequently encountered plastic particles in aquatic environments, specifically polyethylene terephthalate (PET)- and polyethylene (PE)-MPs, were subjected to leaching in the aquatic settings for seven days, both in the absence of light and under UV irradiation. Measurements of dissolved organic carbon (DOC) indicated that UV exposure enhanced the liberation of DOM from PET-MPs, while PE-MPs did not exhibit such leaching. After UV treatment for seven days, the DOM released from PET-MPs increased by 25 times, while that from PE-MPs remained almost unchanged. Then, the molecular diversity and the evolving formation of DOM originating from different MPs were comprehensively analyzed with fluorescence excitation-emission matrix (EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). Specifically, both PET- and PE-DOM exhibited three fluorescence signatures, with the predominant C1 (tryptophan-like) component showing a decline in PET-DOM and a rise in PE-DOM during aging. The FT-ICR-MS analysis unveiled that PET-DOM grew more recalcitrant under UV exposure, while PE-DOM became increasingly labile. In brief, UV irradiation influences MPs-DOM release and transformation differently, depending on the plastic composition. This highlights the significance of exploring MPs-DOM transformation in securing environmental safety.

Unveiling microplastic spectral signatures under weathering and digestive environments through shortwave infrared hyperspectral sensing

Microplastic (MP) pollution presents a novel challenge for marine environmental protection, necessitating comprehensive and long-term monitoring and assessment approaches. Environmental MPs can undergo weathering and microorganism-related digestive processes, altering their original surface properties and chemical structure, thus complicating their quantification and identification. This study aims to establish a comprehensive hyperspectral database for weathered and digestion-degraded MPs, using a wide variety of polymer types collected as either virgin particles or commercial products (within a size range of approximately 3 mm), and to investigate the impact of these processes on their spectral characteristics. Polypropylene (PP) and polyethylene (PE) MPs exhibited significant responses to weathering treatment, as indicated by the formation of new characteristic peaks or slight peak shifts around 1679-1705 nm, which can be attributed to the formation of carbonyl and vinyl functional groups through Norrish reactions. Similarly, polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), and polystyrene (PS) MPs demonstrated notable degradation following digestive treatment, as evidenced by the emergence of new absorption peaks at approximately 1135-1165 nm, possibly associated with alterations involving carbonyl and vinyl functional groups. The results were further validated based on their comparable spectral characteristics of the resultant MPs to reference polymers and possible additives, considering a reasonably accurate match of approximately 80% for the studied MP samples. This study showcases the significant advantage of using shortwave infrared hyperspectral sensing for rapid identification of virgin and exposed MPs with a relatively large scan area after a simple sample preparation. This approach, combined with other complementary characterization techniques, shall provide highly throughput results for MPs identification. This research provides valuable insights into the features extracted from environmental MPs and establishes a foundation for improving their classification efficiency for environmental applications.

The impact of dissolved organic matter on the photodegradation of tetracycline in the presence of microplastics

Microplastics (MPs), an emerging class of pollutants, significantly impact the photoconversion dynamics of tetracycline (TC). But the effect of prevalent dissolved organic matter (DOM) on TC photodegradation in the presence of MPs remains a gap in current research. In this study, the photoconversion behavior and mechanism of TC under simulated sunlight conditions were systematically investigated, both in the presence of DOM and in combination with polystyrene (PS) MPs. The results demonstrated that both DOM and MPs enhanced the photodegradation of TC when compared to its direct degradation. However, DOM, particularly humic acid (HA, 10 mg/L), exhibited a more pronounced enhancing effect on TC photodegradation within 1 h reaction, regardless of the presence or absence of MPs, reaching up to 80%. In reaction systems involving TC-HA and TC-HA-PS, the primary contributors to TC degradation were direct photolysis and HA photosensitization (free radical reactions). Conversely, photosensitization effects were not significant in the presence of fulvic acid (FA). Furthermore, even under dark reaction conditions, HA exhibited a 10% degradation effect on TC. Quenching experiments and electron spin resonance (ESR) results indicate that dark reaction processes involve free radical reactions. Additionally, toxicity test results showed a reduction in the acute toxicity of TC photodegradation products, yet the long-term cumulative risks to organisms deserved attention. In general, this investigation significantly advances our understanding of the intricate photoconversion behavior of TC in the presence of coexisting chemical components.

Innovations in chemical degradation technologies for the removal of micro/nano-plastics in water: A comprehensive review

Micro/nanoplastics (M/NPs) in water have raised global concern due to their potential environmental risks. To reestablish a M/NPs free world, enormous attempts have been made toward employing chemical technologies for their removal in water. This review comprehensively summarizes the advances in chemical degradation approaches for M/NPs elimination. It details and discusses promising techniques, including photo-based technologies, Fenton-based reaction, electrochemical oxidation, and novel micro/nanomotors approaches. Subsequently, critical influence factors, such as properties of M/NPs and operating factors, are analyzed in this review specifically. Finally, it concludes by addressing the current challenges and future perspectives in chemical degradation. This review will provide guidance for scientists to further explore novel strategies and develop feasible chemical methods for the improved control and remediation of M/NPs in the future.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Environmentally persistent free radicals on photoaged nanopolystyrene induce neurotoxicity by affecting dopamine, glutamate, serotonin and GABA in Caenorhabditis elegans

Microplastics are widely detected in the environment and induce toxic effects in various organisms. However, the properties and toxicity associated with environmentally persistent free radicals (EPFRs) in photoaged nanopolystyrene (NPS) remain largely unknown. We investigated the generation of EPFRs on photoaged NPS and their neurotoxicity and underlying mechanism in Caenorhabditis elegans. The results suggested that photoaging induces the generation of EPFRs and reactive oxygen species (O2•-, •OH, and 1O2), which altered the physicochemical properties (morphology, crystallinity, and functional groups) of NPS. Acute exposure to 1 μg/L of NPS-60 (NPS with light irradiation time of 60 d) significantly decreased locomotion behaviors and neurotransmitter contents (e.g., glutamate, serotonin, dopamine, and γ-aminobutyric acid). Treatment with N-acetyl-L-cysteine (NAC) by radical quenching test significantly reduced EPFRs levels on the aged NPS, and the toxicity of NAC-quenching NPS was decreased in nematodes compared to those in photoaged NPS. EPFRs also caused dysfunction of neurotransmission-related gene expression in C. elegans. Thus, EPFRs generated on photoaged NPS contributed to neurotoxicity by affecting dopamine, glutamate, serotonin, and γ-aminobutyric acid neurotransmission. The study highlights the potential risks of photoaged NPS and the contributions of EPFRs to toxicity.

Different microbial assemblage colonized on microplastics and clay particles in aerobic sludge treatment

In this study, a combination of property analysis and high-throughput sequencing was used to investigate the microbial colonization ability and their community structures and functions in polypropylene microplastics (PPMPs), polystyrene microplastics (PSMPs) and montmorillonite (MMT), respectively as the representatives of artificial and natural substrates in aerobic sludge treatment. After 45 d of incubation, the surface properties of substrates were altered with the increased oxygen functional groups and surface roughness, indicating microbial settlement. Moreover, MPs had different microbial structures from that of MMT, and PSMPs exhibited higher microbial diversity and abundance than PPMPs and MMT. Also, these substrates changed the inherent ecological niche in sludge. Especially, the abundance of some pathogens (e.g., Pseudomonas, Klebsiella and Flavobacterium) was increased in MPs, and the disease risk of Kyoto Encyclopedia of Genes and Genomes metabolic pathway (e.g., Infectious diseases: Bacterial, Infectious diseases: Parasitic and Immune diseases) was higher. Also, the presence of MPs inhibited the decomposition of organic matter including soluble chemical oxygen demand and protein compared to natural substrates. The findings revealed the crucial vector role of MPs for microbes and the effect on aerobic sludge treatment, highlighting the necessity of MP removal in sludge.

High salinity promotes the photoaging of polystyrene microplastics with humic acid in seawater

The photoaging of microplastics (MPs) accumulated in the sea can be influenced by humic acid (HA). However, the role of salinity cannot be ignored, as it may potentially disrupt the interaction between MPs and HA, thereby altering the photoaging of MPs. Herein, this study investigated how salinity influences the effect of humic acid (HA, derived from lignite) on the photoaging of polystyrene microplastics (PS MPs) in artificial and natural seawater. The results revealed that HA promoted the photoaging of PS MPs under both low (5 PSU) and high salinity (35 PSU) in light conditions (L), reflected in the formation of fragments, the production of oxygen-containing functional groups (OH, CO, and OCO), and the increase in hydrophilicity of PS MPs. Furthermore, high salinity promoted the photoaging of PS MPs with HA more significantly, as evidenced by the similar indicators and the order of oxygen/carbon atom ratio (O/C): L-HA-High (0.15) > L-HA-Low (0.10) > Unaged (0.02). Interestingly, due to the reduction of electrostatic repulsion, the adsorption of HA on photoaged PS MPs in natural and artificial high salinity seawater was 1.77 mg/g and 0.39 mg/g, respectively, which was significantly higher than those PS MPs photoaged in the low salinity seawater. Furthermore, the electron spin resonance (ESR) results confirmed that more hydroxyl radicals (OH) were generated after adsorbing HA under high salinity conditions, thus promoting the fragmentation and oxidation of PS MPs. Overall, our findings highlight the crucial role of salinity in influencing the photoaging of MPs with HA and help to assess the marine risk of MPs accurately.

Effect of polystyrene microplastics on tetracycline photoconversion under simulated sunlight: Vital role of aged polystyrene

Photoconversion of tetracycline (TC) has been widely reported. However, the effect of microplastics (MPs) on TC conversion kinetics and mechanism has rarely been discussed. In this study, we investigated the effect of (aged) MPs on TC degradation under simulated sunlight and elucidated the underlying mechanism. Our findings demonstrated that the physical and chemical properties of polystyrene (PS), such as particle size, surface groups, and morphology, were significantly altered after aging. Moreover, photoconversion efficiency of TC was suppressed with the spiking of aged PS, while virgin PS showed an opposite tendency. The photodegradation reaction for photosensitization of PS involved 1O2 and HO·. The light-screening effect of aged PS occupied predominance, weakening the direct UV-light absorption of TC and resulting in lower TC degradation efficiency. Additionally, triplet-excited state PS was generated after photon acceptance by aged PS, which could transfer energy to O2, leading to the production of 1O2. The toxicity test manifested that the direct impact of TC products on fathead minnow was ignorable, but long-term negative effects on growth deserved observation. This study enhances our understanding of the environmental fate of PS and TC under sunlight, and provides crucial reference information for better evaluating the potential risk of MPs and chemicals.

Increased bio-toxicity of leachates from polyvinyl chloride microplastics during the photo-aging process in the presence of dissolved organic matter

The pollution caused by microplastics (MPs) has gained global attention due to their potential risks to organisms and human health. The process of photo-aging, which plays a crucial role in the transformation of MPs in aquatic environments, has the potential to influence the ecological risk posed by these particles. Dissolved organic matter (DOM) is a prevalent photosensitizer in surface waters that has been shown to facilitate the transformation of various organic compounds by generating reactive oxygen species under light irradiation. The present study investigated the influence of humic acid (HA), a typical component of DOM, on the photo-aging process of polyvinyl chloride MPs (PVC-MPs), using Fourier transform infrared spectroscopy, as well as assessing the resulting ecological risk through bioassays. The results revealed that the presence of HA enhanced the photo-aging of PVC-MP. Moreover, the leachate exhibited higher acute and genetic toxicity under light irradiation when compared to dark conditions. Notably, the presence of HA significantly increased the toxicity of the leachate, emphasizing the need to consider the impact of DOM when assessing the ecological risk of MPs in surface waters. These findings contribute to a more comprehensive understanding of the potential risks associated with microplastic pollution in natural environments.

Enhancement of photodegradation of polyethylene with adsorbed polycyclic aromatic hydrocarbons under artificial sunlight irradiation

The photodegradation of plastic waste produces microplastics (MPs) in marine environments. Plastics can adsorb hydrophobic organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) and can be transported over long distances. However, the impact of adsorbed pollutants on the photodegradation remains unknown. Here, we show that adsorbed PAHs act as photocatalysts that promote the photodegradation of polyethylene. Upon light irradiation, coloration and surface degradation of the PAH-adsorbed polyethylene sheets were observed, indicating that the PAH-adsorbed polyethylene sheets are less resistant to light. Furthermore, fluorene, phenanthrene, anthracene, benzo[a]anthracene, benzo[a]pyrene, and indeno[1,2,3-cd]perylene adsorbed on polyethylene MP exhibited lower photodegradation rates than the aqueous phase. These results indicate that these PAHs can act as photocatalysts; their role of PAHs may have two adverse effects on marine environment. First, enhanced photodegradation of plastic waste increased the production of MPs. Second, the lifetime of PAHs is extended, thereby enhancing PAHs pollution in marine environments.

Fate and environmental behaviors of microplastics through the lens of free radical

Microplastics (MPs), as plastics with a size of less than 5 mm, are ubiquitously present in the environment and become an increasing environmental concern. The fate and environmental behavior of MPs are significantly influenced by the presence of free radicals. Free radicals can cause surface breakage, chemical release, change in crystallinity and hydrophilicity, and aggregation of MPs. On the other hand, the generation of free radicals with a high concentration and oxidation potential can effectively degrade MPs. There is a limited review article to bridge the fate and environmental behaviors of MP with free radicals and their reactions. This paper reviews the sources, types, detection methods, generation mechanisms, and influencing factors of free radicals affecting the environmental processes of MPs, the environmental effects of MPs controlled by free radicals, and the degradation strategies of MPs based on free radical-associated technologies. Moreover, this review elaborates on the limitations of the current research and provides ideas for future research on the interactions between MPs and free radicals to better explain their environmental impacts and control their risks. This article aims to keep the reader abreast of the latest development in the fate and environmental behaviors of MP with free radicals and their reactions and to bridge free radical chemistry with MP control methodology.

Novel CuMgAlTi-LDH Photocatalyst for Efficient Degradation of Microplastics under Visible Light Irradiation

Microplastics (MPs) in the water system could easily enter the human body and pose a potential threat, so finding a green and effective solution remains a great challenge. At present, the advanced oxidation technology represented by photocatalysis has been proven to be effective in the removal of organic pollutants, making it a feasible method to solve the problem of MP pollution. In this study, the photocatalytic degradation of typical MP polystyrene (PS) and polyethylene (PE) by a new quaternary layered double hydroxide composite photomaterial CuMgAlTi-R400 was tested under visible light irradiation. After 300 h of visible light irradiation, the average particle size of PS decreased by 54.2% compared with the initial average particle size. The smaller the particle size, the higher the degradation efficiency. The degradation pathway and mechanism of MPs were also studied by GC-MS, which showed that PS and PE produced hydroxyl and carbonyl intermediates in the process of photodegradation. This study demonstrated a green, economical, and effective strategy for the control of MPs in water.

Identification and quantification of photodegradation products of disposed expanded polystyrene buoy used in aquaculture

This study investigated the chemicals extracted from an EPS buoy used in aquaculture, which were subsequently collected from a recycling center. It was observed that the chemicals generated upon photodegradation make disposed buoys more toxic. Analysis of the extracted chemicals revealed the presence of 37 compounds, with four compounds quantitatively determined. Further analysis showed that the quantity of compounds dissolved in seawater was significantly higher than the amount remaining on the buoy surface. Based on the assumption that the buoy was exposed to sunlight for a year, it was estimated that 14.44 mg of the four compounds dissolved into the ocean. Given that South Korea used over 7 million EPS buoys, photodegraded EPS buoys are expected to represent a significant source of potentially hazardous chemicals.

Natural Solar Irradiation Produces Fluorescent and Biodegradable Nanoplastics

Nanoplastics (NPs) have raised global concern owing to their potential health effects. Herein, after simulated and natural solar irradiation, polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) nanoplastics (PVC NPs) were observed to exhibit enhanced fluorescence, particularly PVC NPs. Furthermore, the role of photoaged NPs as a potential fluorescence indicator was evaluated by exposing a model aquatic organism Daphnia magna to these NPs. Our results revealed that photoaged NPs exhibited strong fluorescence owing to the generation of conjugated π bonds, which can achieve π-π* electron transition with low energy consumption. Photogenerated fluorescence also enabled the photoaged NPs to act as efficient fluorescent tracers, which can help track NP migration in various organisms. The results of two-photon laser confocal scanning microscopy revealed that the photoaged NPs could translocate across biological barriers and accumulate in extraintestinal tissues in addition to being ingested and excreted. Moreover, compared with pristine NPs, the photoaged NPs underwent biodegradation more easily, probably because of increased hydrophilicity due to photogenerated oxygen-containing moieties. Therefore, in addition to producing fluorescent NPs without the attachment of external fluorescent dyes, the natural photoaging process can promote the migration and degradation of photoaged NPs in food chains.

Elucidating the characteristic of leachates released from microplastics under different aging conditions: Perspectives of dissolved organic carbon fingerprints and nano-plastics

Despite numerous studies that have been devoted to investigating the aging behaviors of microplastics (MPs), dissolved organic carbon (DOC) and nano-plastics (NPs) released from MPs under different aging conditions were limited. Herein, the characterizations and underlying mechanisms of DOC and NPs leaching from MPs (PVC and PS) in the aquatic environment for 130 days under different aging conditions were investigated. The results showed that aging could reduce the abundance of MPs, and high temperature and UV aging generated small-sized MPs (< 100 μm), especially UV aging. DOC-releasing characteristics were related to MP type and aging condition. Meanwhile, MPs were prone to release protein-like and hydrophilic substances except for 60 °C aging of PS MPs. Additionally, 8.77 × 10⁹-8.87 × 10¹⁰ and 4.06 × 10⁹-3.94 × 10¹⁰ NPs/L were detected in leachates from PVC and PS MPs-aged treatments, respectively. High temperature and UV promoted the release of NPs, especially UV irradiation. Meanwhile, smaller sizes and rougher NPs were observed in UV-aged treatments, implying higher ecological risks of leachates from MPs under UV aging. This study highlights the leachate released from MPs under different aging conditions comprehensively, which could offset the knowledge gap between the MPs' aging and their potential threats.

Photoaging of Typical Microplastics as Affected by Air Humidity: Mechanistic Insights into the Important Role of Water Molecules

Recent studies showed that land is the most important sink for microplastics (MPs); however, limited information is available on the photoaging processes of land surface MPs that are exposed to the air. Herein, this study developed two in situ spectroscopic methods to systematically explore the effect of air humidity on MP photoaging using a microscope of Fourier transform infrared spectroscopy and a laser Raman microscope, which were equipped with a humidity control system. Polyethylene microplastics, polystyrene microplastics, and poly(vinyl chloride) microplastics (PVC-MPs) were used as model MPs. Our results showed that relative humidity (RH) could significantly influence the MP surface oxygen-containing moieties generated from photo-oxidation, especially for PVC-MPs. As the RH level varied from 10 to 90%, a decrease in the photogenerated carbonyl group and an increase in the hydroxyl group were observed. This could be attributed to the involvement of water molecules in the production of hydroxyl groups, which subsequently inhibited carbonyl generation. Moreover, the adsorption of coexisting contaminants (i.e., tetracycline) on photoaged MPs exhibited strong RH dependence, which could be assigned to the varied hydrogen bonding between tetracycline carbonyls and aged MP surface hydroxyls. This study reveals a ubiquitous but previously overlooked MP aging route, which may account for the changed MP surface physiochemical properties under solar irradiation.

The generation of environmentally persistent free radicals on photoaged microbeads from cosmetics enhances the toxicity via oxidative stress

Microbeads used in personal care products have been one of the important sources of microplastics (MPs), and little has been reported on their environmental behaviors and health risks. The characteristics of environmentally persistent free radicals (EPFRs) and the toxicity assessment of MPs (environmentally relevant concentrations) from cosmetics during photoaging remains largely unknown. In this study, the formation of EPFRs on polyethylene (PE) microbeads from facial scrubs under light irradiation and their toxicity were investigated using C. elegans as a model organism. The results suggested that light irradiation induced the generation of EPFRs, which accelerates the aging process and alters the physicochemical properties of PE microbeads. Acute exposure to PE (1 mg/L) at photoaged times of 45-60 d significantly decreased the physiological indicators (e.g., head thrashes, body bends, and brood size). The oxidative stress response and stress-related gene expression were also enhanced in nematodes. The addition of N-acetyl-l-cysteine induced significant inhibition of toxicity and oxidative stress in nematodes exposed to 45-60 d of photoaged PE. The Pearson correlation results showed that the concentration of EPFRs was significantly correlated with physiological indicators, oxidative stress, and related-genes expression in nematodes. The data confirmed that the generation of EPFRs combined with heavy metals and organics contributed to toxicity induced by photoaged PE, and oxidative stress might be involved in regulating adverse effects in C. elegans. The study provides new insight into the potential risks of microbeads released into the environment during photoaging. The findings also highlight the necessity for considering the role of EPFRs formation in evaluating the impacts of microbeads.

Ageing characteristics and microplastic release behavior from rainwater facilities under ROS oxidation

Reactive oxygen species (ROS) are ubiquitous in the natural environment that are generated by chemical or biochemical processes. Plastic rainwater facilities, as an important part of modern rainwater systems, are inevitably deteriorated by ROS. As a consequence, microplastics will be released. However, information on how ROS affect the ageing characteristics of plastic rainwater facilities and the subsequent microplastic release behavior is still insufficient. To address this knowledge gap, Fenton reagents were used to simulate the reactive oxygen species (ROS) induced ageing process of three typical plastic rainwater components (rainwater pipe, made of polyvinyl chloride; modular storage tank, made of polypropylene; inspection well, made of high-density polyethylene) and the subsequent microplastic release behavior. After 6 days of Fenton ageing, an increase in sharpness, holes, and fractures on the rainwater facilities' surface was observed by scanning electron microscope (SEM). The functional group changes on the rainwater facilities' surface were analyzed by Fourier transform infrared spectrometer (FTIR) and two-dimensional correlation spectroscopy (2D-COS) and compared with the results of X-ray photoelectron spectroscopy (XPS). During the ageing process, oxygen-containing functional groups were generated and the carbon chains were broken, which promoted peeling and the release of microplastics. The amount of released microplastics (ranging from 158 to 6617 items/g facility) varied with the type of rainwater facilities, and the order was modular storage tank > inspection well > rainwater pipe. The release amount increased with ageing time, and a significant linear relationship was observed (r² > 0.91). The particle size of the released microplastics ranged from 2 to 1362 μm, among which 10-30 μm particles accounted for the largest proportion (62.7 %). The release amount increased exponentially with decreasing particle size (r² > 0.71). This study indicates that large amounts of microplastics could be released from plastic rainwater components during ROS-induced ageing.

Dissolved organic matter derived from biodegradable microplastic promotes photo-aging of coexisting microplastics and alters microbial metabolism

Dissolved organic matter (DOM) leaching from biodegradable microplastics (BMPs) and its characteristics and corresponding environmental implication are rarely investigated. In this study, the main component of DOM leachate from the two BMPs (polyadipate/butylene terephthalate (PBAT)/polycaprolactone (PCL)) was verified by using excitation-emission matrix-parallel factor analysis (EEM-PARAFAC). The PBAT-DOM (PBOM) was aromatized and terrestrial. Comparatively, PCL-DOM (PLOM) had low molecular weight. PBOM contained protein-like components while PLOM contained tryptophan and tyrosine components. Interestingly, both PBOM and PLOM could accelerate the decomposition and oxidation of coexisting polystyrene (PS) under light irradiation. Further, the difference in composition and the properties of BMPs-DOM significantly affected its photochemical activity. The high territoriality and protein-like component of PBOM significantly promoted the generation of ¹O₂ and O₂^•-, which caused faster disruptions to the backbone of PS. Simultaneously, the microbial community's richness, diversity, and metabolism were obviously improved under the combined pressure of aged PS and BMPs-DOM. This study threw light on the overlooked contribution of DOM derived from BMPs in the aging process of NMPs and their impact on the microbial community and provided a promising strategy for better understanding of combined MPs' fate and environmental risk.

Photoaging mechanisms of microplastics mediated by dissolved organic matter in an iron-rich aquatic environment

As emerging pollutants, microplastics (MPs) have aroused worldwide concern due to their ubiquitous distribution, environmental persistence, and potential ecological risks. However, the ageing mechanisms, environmental behaviours and risks of photoaged MPs mediated by environmental factors remain obscure. Herein, systems containing a light source, humic acid (HA) and Fe were established to investigate the natural photoaging process of MPs including polyvinyl chloride (PVC) and polyethylene terephthalate (PET). The dehydrochlorination reaction of PVC-MP was inhibited by HA and Fe, which resulted from the coeffect of photon competition, excited state quenching, radical deactivation or transformation, and defect structure destruction. In contrast, the enhanced fluorescence effect suggested that the photooxidation reactions of PET-MP were promoted by HA and Fe. Therefore, the presence of HA and Fe in the environment inhibited the photoreduction of MPs while favoring the photooxidative process. Additionally, the adsorption capacity for 17α-ethinylestradiol and the cytotoxicity of MPs were increased after ageing in the hv + HA and hv + HA + Fe systems, which was attributed to the changes in morphology, elements and functional groups. This study provided new insight into the ageing behaviours of MPs in the natural environment with widespread dissolved organic matter and Fe.

UV aging of microplastic polymers promotes their chemical transformation and byproduct formation upon chlorination

The presence and accumulation of microplastics (MPs) in water and wastewater is a growing concern. When released to the water bodies, microplastics can be subject to surface weathering due to ultraviolet (UV) exposure. In this study, the effects of UV aging of six MP polymers from three groups (e.g., polyamide, polyester, and polyolefin) on their chlorine reactivity, chemical transformation, and formation of disinfection byproducts (DBPs) were studied. Polyamide (e.g., polyamide 6) in both virgin and UV-aged forms showed significantly higher chlorine demands than other MP polymers (915.5-947.9 versus 7.0-21.1 μmol/g MP in 24 h), and polyolefins were relatively inert to chlorine. UV aging enhanced the destructions of functional groups of polyamide and polyester upon chlorination, promoting the chlorine demands and leaching of organics by up to 1.7- and 2.4-fold, respectively. Polymer monomer and oligomers of polyamide 6 and toxic or endocrine disrupting additives (e.g., dimethyl phthalate and butyl octyl phthalate) were identified in leachates from chlorinated MP polymers by mass spectrometry. Meanwhile, up to >10-fold increases in the yields of trihalomethane, haloacetic acid, haloacetaldehyde, haloacetonitrile, and haloacetamide were observed from 30-day UV-aged MP polymers as compared to their virgin counterparts. Overall, this study reveals that UV aging can promote the reactivity and chemical transformation of MP polymers during chlorination, especially for polyamide and polyester, increase the release of polymer monomers, oligomers, and additives, and aggravate the role of MP polymers as DBP precursors.

Release of millions of micro(nano)plastic fragments from photooxidation of disposable plastic boxes

The widespread use of disposable plastic boxes is exacerbating the dangers of microplastics (MPs); however, little is known about the fragmentation behavior of MPs during aging. In this study, the dynamic evolution on the release of micro(nano)plastics and photoaging properties of two disposable plastic boxes (polypropylene (PP) and polystyrene (PS)) were investigated under light irradiation and mechanical abrasion. Results showed that the weight of PP and PS was decreased by 53 % and 100 %, respectively after 60 d of ultraviolet irradiation (UV60). Moreover, a large number of fragmented particles were produced from the combined light irradiation and abrasion, with 0.142 ± 0.006 and 0.141 ± 0.013 million micro(nano)plastics/mL particles from PP and PS boxes, respectively, and the nanometer range (<100 nm) accounted for 70.8 % and 46.8 %. The correlation model of the average size or alteration time versus carbonyl index (CI) was developed, which indicated that the fragmentation behavior was mainly related to the photooxidation, though mechanical abrasion also played a certain enhancing role. Additionally, PS was susceptible to the fragmentation and photooxidation compared to PP possibly since the phenyl ring of PS was more vulnerable to UV attack than the methyl of PP. The findings of this study clarify the dynamic fragmentation process of micro(nano)plastics of disposable plastic boxes and provide useful information to access environmental fate of MPs more holistically.

The photochemical behaviors of microplastics through the lens of reactive oxygen species: Photolysis mechanisms and enhancing photo-transformation of pollutants

The photoaging mechanisms of various polymers have been explored based on the basic autoxidation scheme (BAS) before 10 years ago, however current research verified some defects in the BAS in both thermodynamic and dynamics. These defects are troublesome because they are associated with the hydrogen abstraction which is central to continuously perform the photooxidation process of microplastics. These found indicated that we might wrongly inferred photo-oxidation process of some microplastics. In addition, the important role of reactive oxygen species (ROS) in the type-dependent photoaging process of various microplastics has been revealed recently. In this case, fully and accurately understanding the photoaging mechanisms of different microplastics in environment is a priority to further manage the ecological risk of microplastics. Herein, this review aims to revise and update the degradation process of microplastics based on the revised BAS and in the perspective of ROS. Specifically, the modification of BAS is firstly discussed. The photoaging mechanisms of representative microplastics (i.e., polyethylene, polystyrene and polyethylene terephthalate) are then updated based on the corrected BAS. Additionally, the role of ROS in their photolysis process and the possibility of microplastics as photosensitizers/mediators to regulate the fate of co-existent pollutants are also analyzed. Finally, several perspectives are then proposed to guide future research on the photoaging behaviors of microplastics. This review would pave the way for the understanding of microplastic photoaging and the management of plastic pollution in environments.

Wastewater preinteraction accelerates the photoaging of disposable box-derived polystyrene microplastics in water

Before being discharged into natural environment, almost all of microplastics (MPs) interact with wastewater constituents in wastewater treatment plants (WWTPs). This study investigated the photoaging of disposable box-derived polystyrene (PS) mediated by real wastewater by simulating the case flowing from WWTPs to natural water. Results showed that wastewater influent pretreatment significantly enhanced the photoaging of PSMPs through the sorption of wastewater constituents, e.g., 2.02 times of increase in photooxidation after 30 d of ultraviolet irradiation. Fulvic acid was identified as the leading contributor for the enhancing effect of wastewater relative to other wastewater constituents such as Cl, CO₃^2-, NO₃^- and clay particles. In-depth mechanism analysis showed that the observed enhancement was critically controlled by the photosensitization effect of wastewater itself and the enhanced utilization of PSMPs for ultraviolet energy. Specifically, various sorbed wastewater constituents can not only generate higher concentrations of •OH and O₂^⋅- than clean MPs without constituents, but also reinforce the utilization of PSMPs for light energy due to the increased dispersion in solution by increasing hydrophilicity and surface charges. Also, the light-shielding effect was induced by wastewater, but was less important. This study bridges wastewater source and MP aging and fate and suggests the shortened lifetime of (micro)plastic samples via WWTP input to deepen our understanding of MP pollution in the environment.

Roles of microplastic-derived dissolved organic matter on the photodegradation of organic micropollutants

Microplastic-derived dissolved organic matter (MP-DOM) is ubiquitous in water environment and exhibits photosensitivity. However, little is known about the effects of MP-DOM on the photodegradation of organic micropollutants in natural water. In this study, we investigated the effect of MP-DOM derived from two typical plastics, i.e., polystyrene (PS), and polyethylene (PE), on the photodegradation of a typical organic micropollutants sulfamethoxazole (SMX) in a simulative natural water system. MP-DOM exerted a significant inhibition on the SMX photodegradation, mainly attributed to the direct photolysis inhibition of SMX caused by the inner filter effect and the complexation effect. Despite the enhanced reactive oxygen species (ROS) generation with the increase of their steady-state concentration by 41.1 - 160.7 %, PS-DOM exhibited high oxidation resistance, causing an inhibition on the photodegradation of SMX probably through transferring electrons to the SMX intermediates. This study helps to deepen the understanding of microplastic photochemical behavior in natural water.

Effects of Weathering on Microplastic Dispersibility and Pollutant Uptake Capacity

Microplastics are ubiquitous in the environment, leading to a new form of plastic pollution crisis, which has reached an alarming level worldwide. Micron and nanoscale plastics may get integrated into ecological cycles with detrimental effects on various ecosystems. Commodity plastics are widely considered to be chemically inert, and alterations in their surface properties due to environmental weathering are often overlooked. This lack of knowledge on the dynamic changes in the surface chemistry and properties of (micro)plastics has impeded their life-cycle analysis and prediction of their fate in the environment. Through simulated weathering experiments, we delineate the role of sunlight in modifying the physicochemical properties of microplastics. Within 10 days of accelerated weathering, microplastics become dramatically more dispersible in the water column and can more than double the surface uptake of common chemical pollutants, such as malachite green and lead ions. The study provides the basis for identifying the elusive link between the surface properties of microplastics and their fate in the environment.