Highly efficient activation of peracetic acid by nano-CuO for carbamazepine degradation in wastewater: The significant role of H2O2 and evidence of acetylperoxy radical contribution

Selective oxidation decontamination in cobalt molybdate activated Fenton-like oxidation via synergic effect of cobalt and molybdenum

In this study, cobalt molybdate (CoMoO4) activated peracetic acid (PAA) was developed for water purification. CoMoO4/PAA system could remove 95% SMX with pseudo-first-order reaction rate constant of 0.15410 min-1, which was much higher than CoFe2O4/PAA, FeMoO4/PAA, and CoMoO4/persulfate systems. CoMoO4/PAA system follows a non-radical species pathway dominated by the high-valent cobalt (Co(IV)), and CH3C(O)OO• shows a minor contribution to decontamination. Density functional theory (DFT) calculation indicates that the generation of Co(IV) is thermodynamically more favorable than CH3C(O)OO• generation. The abundant Co(IV) generation was attributed to the special structure of CoMoO4 and effect of molybdenum on redox cycle of Co(II)/Co(III). DFT calculation showed that the atoms of SMX with higher ƒ0 and ƒ- values are the main attack sites, which are in accordance with the results of degradation byproducts. CoMoO4/PAA system can effectively reduce biological toxicity after the reaction. Benefiting from the selective of Co(IV) and CH3C(O)OO•, the established CoMoO4/PAA system exhibits excellent anti-interference capacity and satisfactory decontamination performance under actual water conditions. Furthermore, the system was capable of good potential practical application for efficient removal of various organics and favorable reuse. Overall, this study provides a new strategy by CoMoO4 activated PAA for decontamination with high efficiency, high selectivity and favorable anti-interference.

Boosting acetaminophen degradation in water by peracetic acid activation: A novel approach using chestnut shell-derived biochar at varied pyrolysis temperatures

In this study, biochar derived from chestnut shells was synthesized through pyrolysis at varying temperatures from 300 °C to 900 °C. The study unveiled that the pyrolysis temperature is pivotal in defining the physical and chemical attributes of biochar, notably its adsorption capabilities and its role in activating peracetic acid (PAA) for the efficient removal of acetaminophen (APAP) from aquatic environments. Notably, the biochar processed at 900 °C, referred to as CN900, demonstrated an exceptional adsorption efficiency of 55.8 mg g-1, significantly outperforming its counterparts produced at lower temperatures (CN300, CN500, and CN700). This enhanced performance of CN900 is attributed to its increased surface area, improved micro-porosity, and a greater abundance of oxygen-containing functional groups, which are a consequence of the elevated pyrolysis temperature. These oxygen-rich functional groups, such as carbonyls, play a crucial role in facilitating the decomposition of the O-O bond in PAA, leading to the generation of reactive oxygen species (ROS) through electron transfer mechanisms. This investigation contributes to the development of sustainable and cost-effective materials for water purification, underscoring the potential of chestnut shell-derived biochar as an efficient adsorbent and catalyst for PAA activation, thereby offering a viable solution for environmental cleanup efforts.

Photo-assisted natural chalcopyrite activated peracetic acid for efficient micropollutant degradation

The effective activation of natural chalcopyrite (CuFeS2) on peracetic acid (PAA) to remove organic micropollutants was studied under visible light irradiation. Results showed than an effective sulfamethoxazole (SMX) degradation (95.0 %) was achieved under visible light irradiation for 30 min at pH 7.0. Quenching experiments, electron spin resonance analysis, and LC/MS spectrum demonstrated that HO• and CH3C(O)OO• were the main reactive species for SMX degradation, accounting for 43.3 % and 56.7 % of the contributions, respectively. Combined with X-ray photoelectron spectroscopy analysis, the photoelectrons generated on CuFeS2 activated by visible light enhanced the Fe3+/Fe2+ and Cu2+/Cu+ cycles on the surface, thereby activating PAA to generate HO•/CH3C(O)OO•. The removal rate of SMX decreased with the increase in wavelengths, due to the formation of low energy photons at longer wavelengths. Besides, the optimal pH for degradation of SMX by CuFeS2/PAA/Vis-LED process was neutral, which was attributed to the increasing easily activated anionic form of PAA during the increase in pH and the depletion of Fe species at alkaline conditions. Cl-, HCO3-, and HA slightly inhibited SMX degradation because of reactive species being quenched and/or shielding effect. Furthermore, the degradation efficiency of different pollutants by CuFeS2/PAA/Vis-LED was also measured, and the removal efficiency was different owing to the selectivity of CH3C(O)OO•. Finally, the process exhibited good applicability in real waters. Overall, this study provides new insight into visible light-catalyzed activation of PAA and suggests on further exploration of the intrinsic activation mechanism of PAA.

Protocatechuic acid enhanced the selective degradation of sulfonamide antibiotics in Fe(III)/peracetic acid process under actually neutral pH conditions

The practical application of the Fe-catalyzed peracetic acid (PAA) processes is seriously restricted due to the need for narrow pH working range and poor anti-interference capacity. This study demonstrates that protocatechuic acid (PCA), a natural and eco-environmental phenolic acid, significantly enhanced the removal of sulfonamide antibiotics in Fe(III)/PAA process under actually neutral pH conditions (6.0-8.0) by complexing Fe(III). With sulfamethoxazole (SMX) as the model contaminant, the pseudo-first-order rate constant of SMX elimination in PCA/Fe(III)/PAA process was 63.5 times higher than that in Fe(III)/PAA process at pH 7.0, surpassing most of the previously reported strategies-enhanced Fe-catalyzed PAA processes (i.e., picolinic acid and hydroxylamine etc.). Excluding the primary contribution of reactive species commonly found in Fe-catalyzed PAA processes (e.g., •OH, R-O•, Fe(IV)/Fe(V) and 1O2) to SMX removal, the Fe(III)-peroxy complex intermediate (CH3C(O)OO-Fe(III)-PCA) was proposed as the primary reactive species in PCA/Fe(III)/PAA process. DFT theoretical calculations indicate that CH3C(O)OO-Fe(III)-PCA exhibited stronger oxidation potential than CH3C(O)OO-Fe(III), thereby enhancing SMX removal. Four potential removal pathways of SMX were proposed and the toxicity of reaction solution decreased with the removal of SMX. Furthermore, PCA/Fe(III)/PAA process exhibited strong anti-interference capacity to common natural anions (HCO3-, Cl-and NO3-) and humic acid. More importantly, the PCA/Fe(III)/PAA process demonstrated high efficiency for SMX elimination in actual samples, even at a trace Fe(III) dosage (i.e., 5 μM). Overall, this study provided a highly-efficient and eco-environmental strategy to remove sulfonamide antibiotics in Fe(III)/PAA process under actually neutral pH conditions and to strengthen its anti-interference capacity, underscoring its potential application in water treatment.

Kumquat peel-derived biochar to support zeolitic imidazole framework-67 (ZIF-67) for enhancing peracetic acid activation to remove acetaminophen from aqueous solution

This study presents the synthesis of a novel composite catalyst, ZIF-67, doped on sodium bicarbonate-modified biochar derived from kumquat peels (ZIF-67@KSB3), for the enhanced activation of peracetic acid (PAA) in the degradation of acetaminophen (APAP) in aqueous solutions. The composite demonstrated a high degradation efficiency, achieving 94.3% elimination of APAP at an optimal condition of 200 mg L-1 catalyst dosage and 0.4 mM PAA concentration at pH 7. The degradation mechanism was elucidated, revealing that superoxide anion (O2•-) played a dominant role, while singlet oxygen (1O2) and alkoxyl radicals (R-O•) also contributed significantly. The degradation pathways of APAP were proposed based on LC-MS analyses and molecular electrostatic potential calculations, identifying three primary routes of transformation. Stability tests confirmed that the ZIF-67@KSB3 catalyst retained an 86% efficiency in APAP removal after five successive cycles, underscoring its durability and potential for application in pharmaceutical wastewater treatment.

Efficient activation of peracetic acid by cobalt modified nitrogen-doped carbon nanotubes for drugs degradation: Performance and mechanism insight

Peracetic acid (PAA) has garnered significant attention as a novel disinfectant owing to its remarkable oxidative capacity and minimal potential to generate byproducts. In this study, we prepared a novel catalyst, denoted as cobalt modified nitrogen-doped carbon nanotubes (Co@N-CNTs), and evaluated it for PAA activation. Modification with cobalt nanoparticles (∼4.8 nm) changed the morphology and structure of the carbon nanotubes, and greatly improved their ability to activate PAA. Co@N-CNTs/PAA catalytic system shows outstanding catalytic degradation ability of antiviral drugs. Under neutral conditions, with a dosage of 0.05 g/L Co@N-CNT-9.8 and 0.25 mM PAA, the removal efficiency of acyclovir (ACV) reached 98.3% within a mere 10 min. The primary reactive species responsible for effective pollutant degradation were identified as acetylperoxyl radicals (CH3C(O)OO•) and acetyloxyl radicals (CH3C(O)O•). In addition, density functional theory (DFT) proved that Co nanoparticles, as the main catalytic sites, were more likely to adsorb PAA and transfer more electrons than N-doped graphene. This study explored the feasibility of PAA degradation of antiviral drugs in sewage, and provided new insights for the application of heterogeneous catalytic PAA in environmental remediation.

Doped Cu0 and sulfidation induced transition from R-O• to •OH in peracetic acid activation by sulfidated nano zero-valent iron-copper

Peracetic acid (PAA) has emerged as a new effective oxidant for various contaminants degradation through advanced oxidation process (AOP). In this study, sulfidated nano zero-valent iron-copper (S-nZVIC) with low Cu doping and sulfidation was synthesized for PAA activation, resulting in more efficient degradation of sulfamethoxazole (SMX, 20 μM) and other contaminants using a low dose of catalyst (0.05 g/L) and oxidant (100 μM). The characterization results suggested that S-nZVIC presented a more uniform size and distribution with fewer metal oxides, as the agglomeration and oxidation were inhibited. More significantly, doped Cu0 and sulfidation significantly enhanced the generation and contribution of •OH but decreased that of R-O• in S-nZVIC/PAA/SMX system compared with that of nZVIC and S-nZVI, accounting for the relatively high degradation efficiency of 97.7% in S-nZVIC/PAA/SMX system compared with 85.7% and 78.9% in nZVIC/PAA/SMX and S-nZVI/PAA/SMX system, respectively. The mechanisms underlying these changes were that (i) doped Cu° could promote the regeneration of Fe(Ⅱ) for strengthened PAA activation through mediating Fe(Ⅱ)/Fe(Ⅲ) cycle by Cu(Ⅰ)/Cu(Ⅱ) cycle; (ii) S species might consume part of R-O•, resulting in a decreased contribution of R-O• in SMX degradation; (iii) sulfidation increased the electrical conductivity, thus facilitating the electron transfer from S-nZVIC to PAA. Consequently, the dominant reactive oxygen species transited from R-O• to •OH to degrade SMX more efficiently. The degradation pathways, intermediate products and toxicity were further analyzed through density functional theory (DFT) calculations, liquid chromatography-mass spectrometry (LC-MS) and T.E.S.T software analysis, which proved the environmental friendliness of this process. In addition, S-nZVIC exhibited high stability, recyclability and degradation efficiency over a wide pH range (3.0∼9.0). This work provides a new insight into the rational design and modification of nano zero-valent metals for efficient wastewater treatment through adjusting the dominant reactive oxygen species (ROS) into the more active free radicals.

New insights into the pH-dependent removal of sulfamethoxazole in peracetic acid activation systems: From mechanistic exploration to practical application potentials

Peracetic acid (PAA) as emerging oxidant in advanced oxidation processes (AOPs) has attracted widespread attention in purifying water pollution. In this research, the removal of target contaminant (sulfamethoxazole, SMX) was investigated through PAA activation by a facile catalyst (Co@C), and the active sites of catalyst were identified as sp3-C, Oads, and Co0 by correlation analysis. Especially, different pH adjustment strategies were designed, including System A (adjusting pH after adding PAA) and System B (adjusting pH before adding PAA), to investigate the impact of oxidant acidity and alkalinity on solution microenvironment as well as effect and mechanism of pollutant removal. The results showed that HO· and CH3C(O)OO· dominated in System A, while Co(IV)O2+ was also observed in System B. Both systems showed optimal SMX degradation (98 %). However, System A exhibited excellent water quality tolerance (efficiency > 78 %), superior sustained catalyst activation (efficiency > 80 % in 40 h), less ion leaching (41 μg L-1), and lower products toxicity. Moreover, the pH of solution after reaction in System B was intensely acidic, requiring costly pH adjustments for discharge. This study unveils the strategy of adjusting pH after adding PAA is preferable for water purification, enriching the emerging research of PAA-based AOPs for the remediation of environments.

Fe-N co-doped biochar derived from biomass waste triggers peracetic acid activation for efficient water decontamination

In this study, the porous carbon material (FeN-BC) with ultra-high catalytic activity was obtained from waste biomass through Fe-N co-doping. The prominent degradation rate (> 96.8%) of naproxen (NAP) was achieved over a wide pH range (pH 3.0-9.0) in FeN-BC/PAA system. Unlike previously reported iron-based peracetic acid (PAA) systems with •OH or RO• as the dominated reactive species, the degradation of contaminants was attributed to singlet oxygen (1O2) produced by organic radicals (RO•) decomposition, which was proved to be thermodynamically feasible and favorable by theoretical calculations. Combining the theoretical calculations, characteristic and experimental analysis, the synergistic effects of Fe and N were proposed and summarized as follows: i) promoted the formation of extensive defects and Fe0 species that facilitated electron transfer between FeN-BC and PAA and continuous Fe(II) generation; ii) modified the specific surface area (SSA) and the isoelectric point of FeN-BC in favor of PAA adsorption on the catalyst surface. This study provides a strategy for waste biomass reuse to construct a heterogeneous catalyst/PAA system for efficient water purification and reveals the synergistic effects of typical metal-heteroatom for PAA activation.

Mechanically treated Mn2O3 triggers peracetic acid activation for superior non-radical oxidation of micropollutants: Identification of reactive complexes

This study used a simple mechanical ball milling strategy to significantly improve the ability of Mn2O3 to activate peracetic acid (PAA) for sustainable and efficient degradation of organic micropollutant (like bisphenol A, BPA). BPA was successfully removed and detoxified via PAA activation by the bm-Mn2O3 within 30 min under neutral environment, with the BPA degradation kinetic rate improved by 3.4 times. Satisfactory BPA removal efficiency can still be achieved over a wide pH range, in actual water and after reuse of bm-Mn2O3 for four cycles. The change in hydrophilicity of Mn2O3 after ball milling evidently elevated the affinity of Mn2O3 for binding to PAA, while the reduction in particle size exposed more active sites contributing partially to catalytic oxidation. Further analysis revealed that BPA oxidation in the ball mill-treated Mn2O3 (bm-Mn2O3)/PAA process mainly depends on the bm-Mn2O3-PAA complex (i.e., Mn(III)-OO(O)CCH3) mediated non-radical pathway rather than R-O• and Mn(IV). Especially, the existence of the Mn(III)-PAA complex was definitely verified by in situ Raman spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Simultaneously, density functional theory calculations determined that PAA adsorbs readily on manganese sites thereby favoring the formation of Mn(III)-OO(O)CCH3 complexes. This study advances an in-depth understanding of the underlying mechanisms involved in the manganese oxide-catalyzed activation of PAA for superior non-radical oxidation of micropollutants.

Using UV/peracetic acid as pretreatment for subsequent bio-treatment of antibiotic-containing wastewater treatment: Mitigating microbial inhibition and antibiotic resistance genes proliferation

UV/peracetic acid (PAA) treatment presents a promising approach for antibiotic removal, but its effects on microbial community and proliferation of antibiotic resistance genes (ARGs) during the subsequent bio-treatment remain unclear. Thus, we evaluated the effects of the UV/PAA on tetracycline (TTC) degradation, followed by introduction of the treated wastewater into the bio-treatment system to monitor changes in ARG expression and biodegradability. Results demonstrated effective TTC elimination by the UV/PAA system, with carbon-centered radicals playing a significant role. Crucially, the UV/PAA system not only eliminated antibacterial activity but also inhibited potential ARG host growth, thereby minimizing the emergence and dissemination of ARGs during subsequent bio-treatment. Additionally, the UV/PAA system efficiently removed multi-antibiotic resistant bacteria and ARGs from the bio-treatment effluent, preventing ARGs from being released into the environment. Hence, we propose a multi-barrier strategy for treating antibiotic-containing wastewater, integrating UV/PAA pre-treatment and post-disinfection with bio-treatment. The inhibition of ARGs transmission by the integrated system was verified through actual soil testing, confirming its effectiveness in preventing ARGs dissemination in the surrounding natural ecosystem. Overall, the UV/PAA treatment system offers a promising solution for tackling ARGs challenges by controlling ARGs proliferation at the source and minimizing their release at the end of the treatment process.

Unlocking the power of activated carbon-mediated peracetic acid activation for efficient antibiotics abatement in groundwater: Coupling the processes of electron transfer, radical production, and adsorption

The activation of peracetic acid (PAA) by activated carbon (AC) is a promising approach for reducing micropollutants in groundwater. However, to harness the PAA/AC system's potential and achieve sustainable and low-impact groundwater remediation, it is crucial to quantify the individual contributions of active species. In this study, we developed a combined degradation kinetic and adsorption mass transfer model to elucidate the roles of free radicals, electron transfer processes (ETP), and adsorption on the degradation of antibiotics by PAA in groundwater. Our findings reveal that ETP predominantly facilitated the activation of PAA by modified activated carbon (AC600), contributing to ∼61% of the overall degradation of sulfamethoxazole (SMX). The carbonyl group (CO) on the surface of AC600 was identified as a probable site for the ETP. Free radicals contributed to ∼39% of the degradation, while adsorption was negligible. Thermodynamic and activation energy analyses indicate that the degradation of SMX within the PAA/AC600 system requires a relatively low energy input (27.66 kJ/mol), which is within the lower range of various heterogeneous Fenton-like reactions, thus making it easily achievable. These novel insights enhance our understanding of the AC600-mediated PAA activation mechanism and lay the groundwork for developing efficient and sustainable technologies for mitigating groundwater pollution. ENVIRONMENTAL IMPLICATION: The antibiotics in groundwater raises alarming environmental concerns. As groundwater serves as a primary source of drinking water for nearly half the global population, the development of eco-friendly technologies for antibiotic-contaminated groundwater remediation becomes imperative. The innovative PAA/AC600 system demonstrates significant efficacy in degrading micropollutants, particularly sulfonamide antibiotics. By integrating degradation kinetics and adsorption mass transfer models, this study sheds light on the intricate mechanisms involved, emphasizing the potential of carbon materials as sustainable tools in the ongoing battle for clean and safe groundwater.

Sustainable bioelectric activation of periodate for highly efficient micropollutant abatement

The periodate (PI)-based advanced oxidation process is valued for environmental remediation, but current activation methods involve high costs, secondary contamination risks, and limited applicability due to external energy inputs (e.g., UV), catalyst incorporation (e.g., Fe2+), or environmental modifications (e.g., freezing). In this work, novel bioelectric activation of PI using the electrons generated by electroactive bacteria was developed and investigated for rapid removal of carbamazepine (CBZ), achieving 100 %, 100 %, and 76 % removal efficiency for 4.22 µM of CBZ in 20 min at pH 2, 120 min at pH 6.4, and HRT of 30 min at pH 8.5, respectively, with a 1 mM PI dose and without an input voltage. It was deduced that electrons derived from bacteria could directly activate PI using Ti mesh electrodes and generate •IO3 via single electron transfer under strongly acidic conditions (e.g., pH 2). Nevertheless, under weak alkaline conditions (e.g., pH 8.5), biogenic electrons indirectly activated PI by generating OH-via 4e-reduction at the Ti mesh cathode, resulting in the formation of •O2- and 1O2. In addition to the metal cathode, a carbon-based cathode finely modulates the 2e-reduction, yielding H2O2 and activating PI to mainly form •OH. Moreover, primarily non-toxic IO3- was produced during treatment, while no detectable reactive iodine species (HOI, I2, and I3-) were observed. Furthermore, the bioelectric activation of PI demonstrated its capability to remove various micropollutants present in secondary-treated municipal wastewater, showcasing its broad-spectrum degradation ability. This study introduces a novel, cost-effective, and environmentally friendly PI activation technique with promising applicability for micropollutant elimination in water treatment.

Mechanism of biochar composite (BN3Z0.5BC) activated peracetic acid for efficient antibiotic degradation: Synergistic effect between free radicals and non-free radicals

This study utilized corn straw as the feedstock to synthesize biochar (BC) loaded with cobalt-zeolitic imidazolate framework nanoparticles and boron nitride quantum dots. The prepared BC composite, named BN3Z0.5BC, efficiently activated peracetic acid (PAA), resulting in the degradation of 94.8% of sulfadiazine (SDZ) in five minutes. Compared to pure BC, the SDZ removal rate increased nearly 5-fold. Mechanism analysis revealed that the main degradation pathway involves synergism between free and non-free radicals. The defect structure on the BC surface possesses a high charge density, stimulating PAA to produce more active species, while nitrogen-oxygen vacancy formation significantly promotes charge transfer. Besides, the unique structure of BC ensures good stability and recyclability, effectively controlling metal leaching. The BN3Z0.5BC/PAA system shows promising applicability across various water matrices, indicating a favorable application outlook.

Hierarchical Porous Bimetallic FeMn Metal-Organic Framework Gel for Efficient Activation of Peracetic Acid in Antibiotic Degradation

Effective techniques for eliminating antibiotics from water environments are in high demand. The peracetic acid (PAA)-based advanced oxidation process has recently drawn increasing attention for its effective antibiotic degrading capability. However, current applications of PAA-based techniques are limited and tend to have unsatisfactory performance. An additional catalyst for PAA activation could provide a promising solution to improve the performance of PAA. Bulky metal-organic framework gels (MOGs) stand out as ideal catalysts for PAA activation owing to their multiple advantages, including large surface areas, high porosity, and hierarchical pore systems. Herein, a bimetallic hierarchical porous structure, i.e., FeMn13BTC, was synthesized through a facile one-pot synthesis method and employed for PAA activation in ofloxacin (OFX) degradation. The optimized FeMn MOG/PAA system exhibited efficient catalytic performance, characterized by 81.85% OFX degradation achieved within 1 h owing to the specific hierarchical structure and synergistic effect between Fe and Mn ions, which greatly exceeded the performance of the only PAA-catalyzed system. Furthermore, the FeMn MOG/PAA system maintained >80% OFX degradation in natural water. Quenching experiments, electron spin resonance spectra, and model molecular degradation revealed that the primary reactive oxygen species responsible for the catalytic effect was R-O•, especially CH3C(=O)OO•, with minor contributions of •OH and 1O2. Overall, introduction of the MOG catalyst strategy for PAA activation achieved high antibiotic degradation performance, establishing a paradigm for the design of heterogeneous hierarchical systems to broaden the scope of catalyzed water treatment applications.

Utilizing the oxygen-atom trapping effect of Co3O4 with oxygen vacancies to promote chlorite activation for water decontamination

Heterogeneous high-valent cobalt-oxo [≡Co(IV)=O] is a widely focused reactive species in oxidant activation; however, the relationship between the catalyst interfacial defects and ≡Co(IV)=O formation remains poorly understood. Herein, photoexcited oxygen vacancies (OVs) were introduced into Co3O4 (OV-Co3O4) by a UV-induced modification method to facilitate chlorite (ClO2-) activation. Density functional theory calculations indicate that OVs result in low-coordinated Co atom, which can directionally anchor chlorite under the oxygen-atom trapping effect. Chlorite first undergoes homolytic O-Cl cleavage and transfers the dissociated O atom to the low-coordinated Co atom to form reactive ≡Co(IV)=O with a higher spin state. The reactive ≡Co(IV)=O rapidly extracts one electron from ClO2- to form chlorine dioxide (ClO2), accompanied by the Co atom returning a lower spin state. As a result of the oxygen-atom trapping effect, the OV-Co3O4/chlorite system achieved a 3.5 times higher efficiency of sulfamethoxazole degradation (~0.1331 min-1) than the pristine Co3O4/chlorite system. Besides, the refiled OVs can be easily restored by re-exposure to UV light, indicating the sustainability of the oxygen atom trap. The OV-Co3O4 was further fabricated on a polyacrylonitrile membrane for back-end water purification, achieving continuous flow degradation of pollutants with low cobalt leakage. This work presents an enhancement strategy for constructing OV as an oxygen-atom trapping site in heterogeneous advanced oxidation processes and provides insight into modulating the formation of ≡Co(IV)=O via defect engineering.

Converting peracetic acid activation by Fe3O4 from nonradical to radical pathway via the incorporation of L-cysteine

Recently, peracetic acid (PAA) based Fenton (-like) processes have received much attention in water treatment. However, these processes are limited by the sluggish Fe(III)/Fe(II) redox circulation efficiency. In this study, L-cysteine (L-Cys), an environmentally friendly electron donor, was applied to enhance the Fe3O4/PAA process for the sulfamethoxazole (SMX) abatement. Surprisingly, the L-Cys incorporation was found not only to enhance the SMX degradation rate constant by 3.2 times but also to switch the Fe(IV) dominated nonradical pathway into the •OH dominated radical pathway. Experiment and theoretical calculation result elucidated -NH2, -SH, and -COOH of L-Cys can increase Fe solubilization by binding to the Fe sites of Fe3O4, while -SH of L-Cys can promote the reduction of bounded/dissolved Fe(III). Similar SMX conversion pathways driven by the Fe3O4/PAA process with or without L-Cys were revealed. Excessive L-Cys or PAA, high pH and the coexisting HCO3-/H2PO4- exhibit inhibitory effects on SMX degradation, while Cl- and humic acid barely affect the SMX removal. This work advances the knowledge of the enhanced mechanism insights of L-Cys toward heterogeneous Fenton (-like) processes and provides experimental data for the efficient treatment of sulfonamide antibiotics in the water treatment.

Progress on mechanism and efficacy of heterogeneous photocatalysis coupled oxidant activation as an advanced oxidation process for water decontamination

The rising debate on the dilemma of photocatalytic water treatment technologies has driven researchers to revisit its prospects in water decontamination. Nowadays, heterogeneous photocatalysis coupled oxidant activation techniques are intensively studied due to their dual advantages of high mineralization and high oxidation efficiency in pollutant degradation. This paved a new way for the development of solar-driven oxidation technologies. Previous reviews focused on the advances in one specific coupling technique, such as photocatalytic persulfate activation and photocatalytic ozonation, but lack a consolidated understanding of the synergy between photocatalytic oxidation and oxidant activation. The synergy involves the migration of photogenerated carriers, radical reaction, and the increase in oxidation rate and mineralization. This review systematically summarizes the fundamentals of activation mechanism, advanced characterization techniques and synergistic effects of coupling techniques for water decontamination. Besides, specific cases that lead researchers astray in revealing mechanisms and assessing synergy are critically discussed. Finally, the prospects and challenges are put forward to further deepen the research on heterogeneous photocatalytic activation of oxidants. This work provides a consolidated view of the existing heterogeneous photocatalysis coupled oxidant activation techniques and inspires researchers to develop more promising solar-driven technologies for water decontamination.

Overlooked Role of Coexistent Hydrogen Peroxide in Activated Peracetic Acid by Cu(II) for Enhanced Oxidation of Organic Contaminants

Cu(II)-catalyzed peracetic acid (PAA) processes have shown significant potential to remove contaminants in water treatment. Nevertheless, the role of coexistent H2O2 in the transformation from Cu(II) to Cu(I) remained contentious. Herein, with the Cu(II)/PAA process as an example, the respective roles of PAA and H2O2 on the Cu(II)/Cu(I) cycling were comprehensively investigated over the pH range of 7.0-10.5. Contrary to previous studies, it was surprisingly found that the coexistent deprotonated H2O2 (HO2-), instead of PAA, was crucial for accelerating the transformation from Cu(II) to Cu(I) (kHO2-/Cu(II) = (0.17-1) × 106 M-1 s-1, kPAA/Cu(II) < 2.33 ± 0.3 M-1 s-1). Subsequently, the formed Cu(I) preferentially reacted with PAA (kPAA/Cu(I) = (5.84 ± 0.17) × 102 M-1 s-1), rather than H2O2 (kH2O2/Cu(I) = (5.00 ± 0.2) × 101 M-1 s-1), generating reactive species to oxidize organic contaminants. With naproxen as the target pollutant, the proposed synergistic role of H2O2 and PAA was found to be highly dependent on the solution pH with weakly alkaline conditions being more conducive to naproxen degradation. Overall, this study systematically investigated the overlooked but crucial role of coexistent H2O2 in the Cu(II)/PAA process, which might provide valuable insights for better understanding the underlying mechanism in Cu-catalyzed PAA processes.

Mechanistic investigation of the electricity and gallic acid synergistically accelerated Fe(III)/Fe(II) cycle for the degradation of carbamazepine

This study investigated the application of a natural plant polyphenol, gallic acid (GA) to form complex with iron to promote the redox cycle of Fe(III)/Fe(II) under neutral initial pH conditions in the electrochemical (EC) system for activation of peroxymonosulfate (PMS) to efficiently degrade carbamazepine (CBZ). Results demonstrated that the synergistic effects of GA and EC significantly improved the removal efficiency, and the EC/GA/Fe(III)/PMS system effectively removed 100% of CBZ within a wide initial pH range of 3.0-7.0. The optimum stoichiometric ratio of GA to Fe(III) was found as 2:1. Investigations including quenching experiment, chemical probe analysis, and electron paramagnetic resonance (EPR) analysis were conducted to identify the primary reaction radicals as •OH, SO4•-, along with the 1O2 and Fe(IV). In the EC/GA/Fe(III)/PMS system, the synergistic effect of GA and electrochemistry led to a remarkable enhancement in the generation of •OH. Furthermore, the complexation reduction mechanism of GA and Fe(III) was proposed based on experimental and instrumental analyses, which demonstrated that the semi-quinone products of GA were the main substances promoting the Fe(III)/Fe(II) cycle. Mass spectrometry results showed that CBZ generated 27 byproducts during degradation, with formic acid as the main product of GA. The degradation efficiency of the EC/GA/Fe(III)/PMS system remained stable and excellent, exhibiting remarkable performance in the presence of various inorganic anions, including Cl- and NO3-, as well as naturally occurring organic compounds such as fulvic acid (FA). Overall results indicated that the EC/GA/Fe(III)/PMS system can be applied to effectively treat practical wastewater treatment without requirement of pH adjustment.

Boron promoted Fe3+/peracetic acid process for sulfamethazine degradation: Efficiency, role of boron, and identification of the reactive species

In this work, boron (B) was used to promote Fe3+/peracetic acid (Fe3+/PAA) for the degradation of sulfamethazine (SMT). An SMT degradation efficiency of 9.1% was observed in the Fe3+/PAA system over 60 min, which was significantly increased to 99.3% in the B/Fe3+/PAA system over 10 min. The B/Fe3+/PAA process also exhibited superior resistance to natural substances, excellent adaptability to different harmful substances, and good removal of antibiotics in natural fresh water samples. The mechanism of action of boron for Fe3+ reduction was determined using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, density functional theory (DFT) calculations, and electrochemical tests. The dominant role of •OH was confirmed using quenching experiments, electron spin resonance (EPR) spectroscopy, and quantitative tests. Organic radicals (R-O•) and Fe(IV) also significantly contribute to the removal of SMT. DFT calculations on the reaction between Fe2+ and the PAA were conducted to further determine the contribution from •OH, R-O•, and Fe(IV) from the perspective of thermodynamics and the reaction pathways. Different boron dosages, Fe3+ dosages, and initial pH values were also investigated in the B/Fe3+/PAA system to study their effect of SMT removal and the production of the reactive species. Fe(IV) production determined the kR-O•+Fe(IV) value suggesting that Fe(IV) may play a more important role than R-O•. A comparison of the results with other processes has also proved that the procedure described in this study (B/Fe3+/PAA) is an effective method for the degradation of antibiotics.

Unveiling the mechanisms of peracetic acid activation by iron-rich sludge biochar for sulfamethoxazole degradation with wide adaptability

Advanced oxidation processes (AOPs) based on peracetic acid (PAA) has been extensively concerned for the degradation of organic pollutants. In this study, metallic iron-modified sludge biochar (Fe-SBC) was employed to activate PAA for the removal of sulfamethoxazole (SMX). The characterization results indicated that FeO and Fe2O3 were successfully loaded on the surface of the sludge biochar (SBC). Fe-SBC/PAA system achieved 92% SMX removal after 30 min. The pseudo-first-order kinetic reaction constant of the Fe-SBC/PAA system was 7.34 × 10-2 min-1, which was 2.4 times higher than the SBC/PAA system. The degradation of SMX was enhanced with increasing the Fe-SBC dosage and PAA concentration. Apart from Cl-, NO3- and SO42- had a negligible influence on the degradation of SMX. Quenching experiments and electron paramagnetic resonance (EPR) techniques identified the existence of reactive species, of which CH3C(O)OO•, 1O2, and O2•- were dominant reactive species in Fe-SBC/PAA system. The effect of different water matrices on the removal of SMX was investigated. The removal of SMX in tap water and lake water were 79% and 69%, respectively. Four possible pathways for the decay of SMX were presented according to the identification of oxidation products. In addition, following the ecological structure-activity relationship model (ECOSAR) procedure and the germination experiments with lettuce seeds to predict the toxicity of the intermediates. The acute and chronic ecotoxicity of SMX solution was dramatically diminished by processing with Fe-SBC/PAA system. In general, this study offered a prospective strategy for the degradation of organic pollutants.

Selective Transformation of Micropollutants in Saline Wastewater by Peracetic Acid: The Overlooked Brominating Agents

Peracetic acid (PAA) is an emerging alternative disinfectant for saline waters; HOBr or HOCl is known as the sole species contributing to halogenation reactions during PAA oxidation and disinfection. However, new results herein strongly indicated that the brominating agents (e.g., BrCl, Br2, BrOCl, and Br2O) are generated at concentrations typically lower than HOCl and HOBr but played significant roles in micropollutants transformation. The presence of Cl- and Br- at environmentally relevant levels could greatly accelerate the micropollutants (e.g., 17α-ethinylestraiol (EE2)) transformation by PAA. The kinetic model and quantum chemical calculations collectively indicated that the reactivities of bromine species toward EE2 follow the order of BrCl > Br2 > BrOCl > Br2O > HOBr. In saline waters with elevated Cl- and Br- levels, these overlooked brominating agents influence bromination rates of more nucleophilic constituents of natural organic matter and increase the total organic bromine. Overall, this work refines our knowledge regarding the species-specific reactivity of brominating agents and highlights the critical roles of these agents in micropollutant abatement and disinfection byproduct formation during PAA oxidation and disinfection.

pH-dependent bisphenol A transformation and iodine disinfection byproduct generation by peracetic acid: Kinetic and mechanistic explorations

Peracetic acid (PAA) is regarded as an environmentally friendly oxidant because of its low formation of toxic byproducts. However, this study revealed the potential risk of generating disinfection byproducts (DBPs) when treating iodine-containing wastewater with PAA. The transformation efficiency of bisphenol A (BPA), a commonly detected phenolic contaminant and a surrogate for phenolic moieties in dissolved organic matter, by PAA increased rapidly in the presence of I-, which was primarily attributed to the formation of active iodine (HOI/I2) in the system. Kinetic model simulations demonstrated that the second-order rate constant between PAA and HOI was 54.0 M-1 s-1 at pH 7.0, which was lower than the generation rate of HOI via the reaction between PAA and I-. Therefore, HOI can combine with BPA to produce iodine disinfection byproducts (I-DBPs). The transformation of BPA and the generation of I-DBPs in the I-/PAA system were highly pH-dependent. Specifically, acidic conditions were more favorable for BPA degradation because of the higher reaction rates of BPA and HOI. More iodinated aromatic products were detected after 5 min of the reaction under acidic and neutral conditions, resulting in higher toxicity towards E. coli. After 12 h of the reaction, more adsorbable organic iodine (AOI) was generated at alkaline conditions because HOI was not able to efficiency transform to IO3-. The presence of H2O2 in the PAA solution played a role in the reaction with HOI, particularly under alkaline conditions. This study significantly advances the understanding of the role of I- in BPA oxidation by PAA and provides a warning to further evaluate the potential environmental risk during the treatment of iodine-bearing wastewater with PAA.

Biochar loaded with CoFe2O4 enhances the formation of high-valent Fe(IV) and Co(IV) and oxygen vacancy in the peracetic acid activation system for enhanced antibiotic degradation

Corn straw and sludge-derived biochar composite (BC) loaded with CoFe2O4 was successfully prepared to activate peracetic acid (PAA) for efficient degradation of tetracycline hydrochloride (TCH). Within 60 s, 96 % TCH removal efficiency was achieved through a non-free radical degradation pathway, primarily driven by singlet oxygen (1O2). The mechanism involves the electron-rich groups on the biochar surface, which facilitate the cleavage of the PAA OO bond to generate •O2-/1O2 and provide electrons to induce the formation of high-valent Fe(IV) and Co(IV). The oxygen vacancies on the surface of the CoFe2O4-loaded biochar composite (CFB-2) contribute partially to 1O2 production through their transformation into a metastable intermediate with dissolved oxygen. Moreover, elevated temperatures further enhance PAA activation by CFB-2, leading to increased reactive oxygen species (ROS) production through PAA decomposition, thereby promoting TCH removal. This study offers new insights into the catalysis of metal-loaded biochar for efficient TCH degradation via non-free radical generation.

Hydroxylamine enhanced the degradation of diclofenac in Cu(II)/peracetic acid system: Formation and contributions of CH3C(O)O•, CH3C(O)OO•, Cu(III) and •OH

The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)O•, CH3C(O)OO•, Cu(III), and •OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO• was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO• mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O• and •OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.

Spin state-dependent in-situ photo-Fenton-like transformation from oxygen molecule towards singlet oxygen for selective water decontamination

The development of 1O2-dominanted selective decontamination for water purification was hampered by extra H2O2 consumption and poor 1O2 generation. Herein, we proposed the reconstruction of Fe spin state using near-range N atom and long-range N vacancies to enable efficient generation of H2O2 and sequential activation of H2O2 into 1O2 after visible-light irradiation. Theoretical and experimental results revealed that medium-spin Fe(III) strengthened O2 adsorption, penetrated eg electrons to antibonding p-orbital of oxygen, and lowered the free energy of O2 activation, enabling the oxygen protonation for H2O2 generation. Thereafter, the electrons of H2O2 could be extracted by low-spin Fe(III) and rapidly converted into 1O2 in a nonradical path. The developed 1O2-dominated in-situ photo-Fenton-like system had an excellent pH universality and anti-interference to inorganic ions, dissolved organic matter, and even real water matrixes (e.g., tap water and secondary effluent). This work provided a novel insight for sustainable and efficient 1O2 generation, which motivated the development of new-generation selective water treatment technology.

Heat induced superfast diclofenac removal in Cu(II)-activated peracetic acid system: Mediation from non-radical to radical pathway

A Cu(II)/heat coactivated peracetic acid (PAA) system for enhancing diclofenac (DCF) degradation was proposed in this work. The superiority of this synergetic activation strategy for PAA, working reactive species, catalytic mechanism and effects of reaction parameters on DCF elimination in this system were simultaneously investigated. Based on our results, the DCF loss rate in Cu(II)-heat/PAA process at pH 8.0 was about 49.3 and 4.2 times of that in Cu(II)/PAA and heat/PAA processes, respectively. Increasing the reaction temperature to 60 оC not only motivated the conversion of Cu(II) to Cu(I) but also facilitated the one-electron transfer between Cu(I) and PAA, boosting the generation of radicals. Organic radicals (mainly CH3C(O)O• and CH3C(O)OO•) were evidenced to be the core oxidizing substances dominating in the destruction of DCF while hydroxyl radical (•OH) made a minor contribution in this system by electron paramagnetic resonance (EPR) method together with scavenging experiments. This study broads the eyes into enhanced PAA activation initiated by homogenous Cu(II), providing a simple but efficient tool to degrade micropollutants.

Resource utilization of rice straw to prepare biochar as peroxymonosulfate activator for naphthalene removal: Performances, mechanisms, environmental impact and applicability in groundwater

Herein, biochar was prepared using rice straw, and it served as the peroxymonosulfate (PMS) activator to degrade naphthalene (NAP). The results showed that pyrolysis temperature has played an important role in regulating biochar structure and properties. The biochar prepared at 900°C (BC900) had the best activation capacity and could remove NAP in a wide range of initial pH (5-11). In the system of BC900/PMS, multi-reactive species were produced, in which 1O2 and electron transfer mainly contributed to NAP degradation. In addition, the interference of complex groundwater components on the NAP removal rate must get attention. Cl- had a significant promotional effect but risked the formation of chlorinated disinfection by-products. HCO3-, CO32-, and humic acid (HA) had an inhibitory effect; surfactants had compatibility problems with the BC900/PMS system, which could lead to unproductive consumption of PMS. Significantly, the BC900/PMS system showed satisfactory remediation performance in spiked natural groundwater and soil, and it could solve the problem of persistent groundwater contamination caused by NAP desorption from the soil. Besides, the degradation pathway of NAP was proposed, and the BC900/PMS system could degrade NAP into low or nontoxic products. These suggest that the BC900/PMS system has promising applications in in-situ groundwater remediation.

Phosphate enhanced Cu(II)/peracetic acid process for diclofenac removal: Performance and mechanism

Since limitedly existing researches suggested Cu(II) had deficiently catalytic ability to PAA, in this work, we tested the oxidation performance of Cu(II)/PAA system on diclofenac (DCF) degradation under neutral conditions. It was found that overwhelming DCF removal could be obtained in Cu(II)/PAA system at pH 7.4 using phosphate buffer solution (PBS) compared to poor loss of DCF without PBS, and the apparent rate constant of DCF removal in PBS/Cu(II)/PAA system was 0.0359 min^-1, 6.53 times of that in Cu(II)/PAA system. Organic radicals (i.e., CH₃C(O)O• and CH₃C(O)OO•) were evidenced as the dominant contributors to DCF destruction in PBS/Cu(II)/PAA system. PBS motivated the reduction of Cu(II) to Cu(I) through chelation effect, and then the activation of PAA by Cu(I) was facilitated. Besides, due to the steric hindrance of Cu(II)-PBS complex (CuHPO₄), PAA activation was mediated from non-radical-generating pathway to radical-generating pathway, leading to desirably effective DCF removal by radicals. The transformation of DCF mainly experienced hydroxylation, decarboxylation, formylation and dehydrogenation in PBS/Cu(II)/PAA system. This work proposes the potential of coupling of phosphate and Cu(II) in optimizing PAA activation for organic pollutants elimination.

Degradation of micropollutants in secondary wastewater effluent using nonthermal plasma-based AOPs: The roles of free radicals and molecular oxidants

Emerging micropollutants (µPs) appearing in water bodies endanger aquatic animals, plants, microorganisms and humans. The nonthermal plasma-based advanced oxidation process is a promising technology for eliminating µPs in wastewater but still needs further development in view of full-scale industrial application. A novel cascade reactor design which consists of an ozonation chamber preceding a dielectric barrier discharge (DBD) plasma reactor with a falling water film on an activated carbon textile (Zorflex®) was used to remove a selection of µPs from secondary municipal wastewater effluent. Compare to previous plasma reactor, molecular oxidants degraded micropollutants again in an ozonation chamber in this study, and the utilization of different reactive oxygen species (ROS) was improved. A gas flow rate of 0.4 standard liter per minute (SLM), a water flow rate of 100 mL min^-1, and a discharge power of 25 W are identified as the optimal plasma reactor parameters, and the µP degradation efficiency and electrical energy per order value (EE/O) are 84-98% and 2.4-5.3 kW/m³, respectively. The presence of ROS during plasma treatment was determined in view of the µPs removal mechanisms. The degradation of diuron (DIU), bisphenol A (BPA) and 2-n-octyl-4-isothiazolin-3-one (OIT) was mainly performed in ozonation chamber, while the degradation of atrazine (ATZ), alachlor (ALA) and primidone (PRD) occurred in entire cascade system. The ROS not only degrade the µPs, but also remove nitrite (90.5%), nitrate (69.6%), ammonium (39.6%) and bulk organics (11.4%). This study provides insights and optimal settings for an energy-efficient removal of µPs from secondary effluent using both free radicals and molecular oxidants generated by the plasma in view of full-scale application.

Ferrate(VI)/Periodate System: Synergistic and Rapid Oxidation of Micropollutants via Periodate/Iodate-Modulated Fe(IV)/Fe(V) Intermediates

The presence of organic micropollutants in water sources worldwide has created a need for the development of effective and selective oxidation methods in complex water matrices. This study is the first report of the combination of ferrate(VI) (Fe(VI)) and periodate (PI) for synergistic, rapid, and selective elimination of multiple micropollutants. This combined system was found to outperform other Fe(VI)/oxidant systems (e.g., H₂O₂, peroxydisulfate, and peroxymonosulfate) in rapid water decontamination. Scavenging, probing, and electron spin resonance experiments showed that high-valent Fe(IV)/Fe(V) intermediates, rather than hydroxyl radicals, superoxide radicals, singlet oxygen, and iodyl radicals, played a dominant role in the process. Further, the generation of Fe(IV)/Fe(V) was evidenced directly by the ⁵⁷Fe Mössbauer spectroscopic test. Surprisingly, the reactivity of PI toward Fe(VI) is rather low (0.8223 M^-1 s^-1) at pH 8.0, implying that PI was not acting as an activator. Besides, as the only iodine sink of PI, iodate also played an enhanced role in micropollutant abatement by Fe(VI) oxidation. Further experiments proved that PI and/or iodate might function as the Fe(IV)/Fe(V) ligands, causing the utilization efficiency of Fe(IV)/Fe(V) intermediates for pollutant oxidation to outcompete their auto-decomposition. Finally, the oxidized products and plausible transformation pathways of three different micropollutants by single Fe(VI) and Fe(VI)/PI oxidation were characterized and elucidated. Overall, this study proposed a novel selective oxidation strategy (i.e., Fe(VI)/PI system) that could efficiently eliminate water micropollutants and clarified the unexpected interactions between PI/iodate and Fe(VI) for accelerated oxidation.

Spatial confinement: A green pathway to promote the oxidation processes for organic pollutants removal from water

Organic pollutants removal from water is pressing owing to the great demand for clean water. Oxidation processes (OPs) are the commonly used method. However, the efficiency of most OPs is limited owing to the poor mass transfer process. Spatial confinement is a burgeoning way to solve this limitation by use of nanoreactor. Spatial confinement in OPs would (i) alter the transport characteristics of protons and charges; (ii) bring about molecular orientation and rearrangement; (iii) cause the dynamic redistribution of active sites in catalyst and reduce the entropic barrier that is high in unconfined space. So far, spatial confinement has been utilized for various OPs, such as Fenton, persulfate, and photocatalytic oxidation. A comprehensive summary and discussion on the fundamental mechanisms of spatial confinement mediated OPs is needed. Herein, the application, performance and mechanisms of spatial confinement mediated OPs are overviewed firstly. Subsequently, the features of spatial confinement and their effects on OPs are discussed in detail. Furthermore, environmental influences (including environmental pH, organic matter and inorganic ions) are studied with analyzing their intrinsic connection with the features of spatial confinement in OPs. Lastly, challenges and future development direction of spatial confinement mediated OPs are proposed.

Degradation of tetracyclines by peracetic acid and UV/peracetic acid: Reactive species and theoretical computations

As an environment-friendly oxidant and disinfectant, peracetic acid (PAA) and PAA based-advanced oxidation processes (AOPs) for the treatment of emerging micropollutants have raised increasing interest, owing to their ease of activation and less generation of harmful disinfection byproducts. Tetracyclines (TCs) antibiotics as a group of wide-spectrum antibiotics are frequently detected in sewage effluents, while the knowledge of PAA-based advanced oxidation reactions to remove the substrates is quite limited. In this work, we systematically investigated the kinetics and underlying transformation mechanisms of three TCs including tetracycline (TTC), oxytetracycline (OTC), and chlortetracycline (CTC) in the UV-activated PAA oxidation process. The results indicated that three TCs can be efficiently decayed by UV/PAA. The pseudo-first-order reaction rate constants (k_obs) of TCs followed the order: k_CTC (0.453 min^-1) ≫ k_TTC (0.164 min^-1) > k_OTC (0.158 min^-1). Quenching experiments showed that the removal of CTC was mainly ascribed to the direct oxidation of PAA, while TTC and OTC were more susceptible to free radicals. The k_obs values of the three TCs by PAA oxidation presented a fairly well correlation to the global nucleophilicity and the activation energies of the TC molecules, highlighting the structure-specific reactions of TCs to PAA. Based on product identification and theoretical calculation, N-demethylation and hydroxylation were proposed as the main pathways for TCs degradation by PAA non-radical oxidation. The combination of PAA and UV irradiation can further improve the degradation efficiency of TCs and contribute to reducing the diffusion and transmission of resistance genes in the environment.

Thiosulfate enhanced Cu(II)-catalyzed Fenton-like reaction at neutral condition: Critical role of sulfidation in copper cycle and Cu(III) production

Thiosulfate (S₂O₃^2-) has been proven to be an effective promoter of Fenton-like reactions by accelerating the metal ions cycle. However, up to now, little is known about the role of sulfur transformation and intermediate sulfur in the regulation of metal chemical cycle and reactive species production. Herein, free Cu(II) was selected as catalyst for the activation of H₂O₂. The introduction of S₂O₃^2- significantly enhanced the degradation of benzoic acid, and the degradation rate (k_obs) was 5.8 times that of Cu(II)/H₂O₂ system. The kinetic model revealed the transformation of sulfur species and demonstrated that sulfides (i.e., HS^-/S^2-, S₂O₃^2-) and S⁰ were the dominant electron donor for the reduction of Cu(II) into Cu(I). Consequently, the reduction and complexation roles of S₂O₃^2- significantly resolve the rate-limiting step and broaden the pH range of in Fenton-like reactions. Evidence for the critical role of high-valent copper (Cu(III)) and HO^• on BA degradation was obtained by scavengers experiments, electron paramagnetic resonance and fluorescent probes. Meanwhile, the Cu(II)/H₂O₂/S₂O₃^2- system also exhibited satisfactory anti-interference ability of the various matrix. Overall, this study offers mechanistic insight into sulfidation in Cu chemical cycle and Cu(III) generation, and highlights the potential of S₂O₃^2- for Fenton-like reactions to control pollutants.

Co-Mn spinel oxides trigger peracetic acid activation for ultrafast degradation of sulfonamide antibiotics: Unveiling critical role of Mn species in boosting Co activity

Activation of peracetic acid (PAA) to generate powerful oxidizing species has become a promising advanced oxidation processes (AOPs) in wastewater treatment, yet the development of low-cost and high-performance activators is still a primary challenge. Herein, a range of Co-Mn spinel oxides (Co_3-xMn_xO₄) with varying levels of Co and Mn were successfully elaborated, in which Co_1.1Mn_1.9O₄ exhibited remarkable performance in PAA activation, outperforming most reported heterogeneous catalysts. Extensive quenching experiments and electron spin resonance (ESR) analysis indicated that acetylperoxyl radical (CH₃C(O)OO^●) was the predominated oxidizing species responsible for sulfamethoxazole (SMX) degradation. Density functional theory (DFT) calculations revealed that doping with Mn not only promoted the electron transfer and accelerated reduction of Co(III) to Co(II), but also lowered the energy barrier for PAA activation. Moreover, the prominent chemisorption and activation of PAA with Co_1.1Mn_1.9O₄ was also benefitted from the significant role of Mn in optimizing the distribution of bonding and antibonding states on Co 3d orbitals. Unexpectedly, high levels of Cl^-greatly facilitated SMX degradation due to the mass production of HOCl from the chain reactions of various radicals with Cl^-. This work provides new insights into bimetallic activation of PAA, and the knowledge obtained will further advance the application of PAA-based AOPs.

Inactivation of fungal spores in water by CuO-activated peracetic acid: Kinetics, mechanism and regrowth

The disinfection of pathogenic microorganisms in water treatment by peracetic acid (PAA)-based advanced oxidation processes (AOPs) has been gaining increasing concern. In this work, the inactivation mechanism, influencing factors and regrowth of two pathogenic Aspergillus species in the system of CuO-activated PAA were studied for the first time. The k values of A. niger and A. flavus inactivated by PAA/CuO system were 3.9 and 2.1-fold higher than those inactivated by PAA alone. PAA concentration and CuO dose were positively correlated with the inactivation efficiency, while humic acid and pH were negatively correlated. The main active species that contributed to the inactivation of fungal spores in PAA/CuO system were •OH, CH₃C(O)OO• and ¹O₂. PAA/CuO system had more intense oxidative stimulation and more serious damage to fungal spores according to the analysis of cell membrane integrity and intracellular ROS levels. In addition, the PAA/CuO system was less impacted by the water matrix and kept a good inactivation efficiency in real water samples. The regrowth potential of fungal spores after disinfection was also reduced in PAA/CuO system so as to avoid the risk of biological regrowth. This study provides a feasible PAA-based advanced oxidation method for activating PAA and inactivating fungal spores.