Epitope mapping by photobleaching fluorescence resonance energy transfer measurements using a laser scanning microscope system

Image segmentation and separation of spectrally similar dyes in fluorescence microscopy by dynamic mode decomposition of photobleaching kinetics

BACKGROUND

Image segmentation in fluorescence microscopy is often based on spectral separation of fluorescent probes (color-based segmentation) or on significant intensity differences in individual image regions (intensity-based segmentation). These approaches fail, if dye fluorescence shows large spectral overlap with other employed probes or with strong cellular autofluorescence.

RESULTS

Here, a novel model-free approach is presented which determines bleaching characteristics based on dynamic mode decomposition (DMD) and uses the inferred photobleaching kinetics to distinguish different probes or dye molecules from autofluorescence. DMD is a data-driven computational method for detecting and quantifying dynamic events in complex spatiotemporal data. Here, DMD is first used on synthetic image data and thereafter used to determine photobleaching characteristics of a fluorescent sterol probe, dehydroergosterol (DHE), compared to that of cellular autofluorescence in the nematode Caenorhabditis elegans. It is shown that decomposition of those dynamic modes allows for separating probe from autofluorescence without invoking a particular model for the bleaching process. In a second application, DMD of dye-specific photobleaching is used to separate two green-fluorescent dyes, an NBD-tagged sphingolipid and Alexa488-transferrin, thereby assigning them to different cellular compartments.

CONCLUSIONS

Data-based decomposition of dynamic modes can be employed to analyze spatially varying photobleaching of fluorescent probes in cells and tissues for spatial and temporal image segmentation, discrimination of probe from autofluorescence and image denoising. The new method should find wide application in analysis of dynamic fluorescence imaging data.

Photobleaching statistics in single-molecule on-/off-time distributions

The on- and and off-time distributions from fluorescence single-molecule experiments are widely used to extract kinetics parameters with the goal to provide a quantitative description for the molecule's behavior on the ensemble level. Such experiments are inevitably influenced by photobleaching, where the fluorescent probe transitions to a nonemissive state. Yet, it appears that few reports went beyond acknowledging this unavoidable complication; in fact, it has so far been ignored when evaluating off-time distributions. Here, we present a theoretical framework that allows the derivation of analytical equations in which photobleaching kinetics are rigorously incorporated. Unexpectedly, our results indicate that the off-time distribution should be nonexponential even when all the rate processes are single exponential. With the analytical theory understood and demonstrated as easy to implement, such ubiquitous photochemical processes can now be readily included in routine experimental analyses.

Development of Activity-Based Reporter Gene Technology for Imaging of Protease Activity with an Exquisite Specificity in a Single Live Cell

Imaging of an active protease with an exquisite specificity in the presence of highly homologous proteins within a living cell is a very challenging task. Herein, we disclose a new method called "Activity-based Reporter Gene Technology" (AbRGT). This method provides an opportunity to study the function of "active protease" with an unprecedented specificity. As a proof-of-concept, we have applied this method to study the function of individual caspase protease in both intrinsic and extrinsic apoptosis signaling pathways. The versatility of this method is demonstrated by studying the function of both the initiator and effector caspases, independently. The modular fashion of this technology provides the opportunity to noninvasively image the function of cathepsin-B in a caspase-dependent cell death pathway. As a potential application, this method is used as a tool to screen compounds that are potent inhibitors of caspases and cathepsin-B proteases. The fact that this method can be readily applied to any protease of interest opens up huge opportunities for this technology in the area of target validation, high-throughput screening, in vivo imaging, diagnostics, and therapeutic intervention.

Improving the Sensitivity of Fluorescence-Based Immunoassays by Photobleaching the Autofluorescence of Magnetic Beads

In fluorescence-based assays, usually a target molecule is captured using a probe conjugated to a capture surface, and then detected using a second fluorescently labeled probe. One of the most common capture surfaces is a magnetic bead. However, magnetic beads exhibit strong autofluorescence, which often overlaps with the emission of the reporter fluorescent dyes and limits the analytical performance of the assay. Here, several widely used magnetic beads are photobleached and their autofluorescence is reduced to 1% of the initial value. Their autofluorescence properties, including their photobleaching decay rates and autofluorescence spectra pre- and post-photobleaching, and the stability of the photobleaching over a period of two months are analyzed. The photobleached beads are stable over time and their surface functionality is retained. In a high-sensitivity LX-200 system using photobleached magnetic beads, human interleukin-8 is detected with a threefold improvement in detection limit and signal-to-noise ratio over results achievable with nonbleached beads. Since many contemporary immunoassays rely on magnetic beads as capture surfaces, prebleaching the beads may significantly improve the analytical performance of these assays. Moreover, nonmagnetic beads with low autofluorescence are also successfully photobleached, suggesting that photobleaching can be applied to various capture surfaces used in fluorescence-based assays.

Confocal microscopic dual-laser dual-polarization FRET (2polFRET) at the acceptor side for correlating rotations at different distances on the cell surface

Relationship of donor and acceptor fluorescence anisotropies as well as efficiency of fluorescence resonance energy transfer (FRET) has been investigated in a confocal microscope in the context of FRET systems comprised of donor and acceptor-labeled MHCI and MHCII receptors on the surface of Kit-225 K6 human T-cells. The measurements have been carried out in a 2-laser, 5-signal platform where the total donor fluorescence intensity and 2 acceptor fluorescence intensities with their anisotropies - one at the donor's excitation wavelength, the other at the acceptor's excitation wavelength - have been detected. This configuration enabled the determination of FRET efficiency and correlating it with the two acceptor fluorescence anisotropies as a kind of calibration. Estimations for the FRET-enhanced donor fluorescence anisotropy, the directly excited acceptor fluorescence anisotropy, and the fluorescence anisotropy of sensitized emission have been obtained. Procedures for determining FRET by measuring only the total donor intensity and the acceptor intensity and its anisotropy, or two acceptor intensities and their anisotropies have been elaborated, the errors of which have been estimated based on the fluorescence anisotropy values obtained in the calibration with the method of flow cytometric energy transfer (FCET). The combined detection of the donor and acceptor fluorescence anisotropies enabled also the determination of the lower and upper limits of the orientation factor for FRET (κ²). An increase in range for κ² with increasing FRET efficiency has been observed, with average κ² values different from the dynamic random average of 2/3. These observations call for the need of κ² determination in proximity measurements, where the donor and acceptor orientations are not predictable. An increasing range of κ² with increasing intermolecular proximity of the MHCI and MHCII receptors has been observed. This indicates that molecular flexibility in the clusters of the MHCI and MHCII receptors reduces with increasing cluster density, i.e. a "fluidity gradient" exists in the clusters. More specifically, the local density dependent flexibility can also be taken as a direct proof for that the association of these receptors is non-random, but mediated by some type of physical interaction, a finding as a benefit of FRET detection by polarization spectroscopy. Two new quantities - the quenched donor fluorescence anisotropy and a fluorescence anisotropy analogue, the "dissymmetry index" of the polarized FRET efficiency components - have also been introduced for the characterization of the orientational dynamics of the excited state during FRET.

Current Approaches Toward Quantitative Mapping of the Interactome

Protein–protein interactions (PPIs) play a key role in many, if not all, cellular processes. Disease is often caused by perturbation of PPIs, as recently indicated by studies of missense mutations. To understand the associations of proteins and to unravel the global picture of PPIs in the cell, different experimental detection techniques for PPIs have been established. Genetic and biochemical methods such as the yeast two-hybrid system or affinity purification-based approaches are well suited to high-throughput, proteome-wide screening and are mainly used to obtain qualitative results. However, they have been criticized for not reflecting the cellular situation or the dynamic nature of PPIs. In this review, we provide an overview of various genetic methods that go beyond qualitative detection and allow quantitative measuring of PPIs in mammalian cells, such as dual luminescence-based co-immunoprecipitation, Förster resonance energy transfer or luminescence-based mammalian interactome mapping with bait control. We discuss the strengths and weaknesses of different techniques and their potential applications in biomedical research.

Understanding FRET as a research tool for cellular studies

Communication of molecular species through dynamic association and/or dissociation at various cellular sites governs biological functions. Understanding these physiological processes require delineation of molecular events occurring at the level of individual complexes in a living cell. Among the few non-invasive approaches with nanometer resolution are methods based on Förster Resonance Energy Transfer (FRET). FRET is effective at a distance of 1-10 nm which is equivalent to the size of macromolecules, thus providing an unprecedented level of detail on molecular interactions. The emergence of fluorescent proteins and SNAP- and CLIP- tag proteins provided FRET with the capability to monitor changes in a molecular complex in real-time making it possible to establish the functional significance of the studied molecules in a native environment. Now, FRET is widely used in biological sciences, including the field of proteomics, signal transduction, diagnostics and drug development to address questions almost unimaginable with biochemical methods and conventional microscopies. However, the underlying physics of FRET often scares biologists. Therefore, in this review, our goal is to introduce FRET to non-physicists in a lucid manner. We will also discuss our contributions to various FRET methodologies based on microscopy and flow cytometry, while describing its application for determining the molecular heterogeneity of the plasma membrane in various cell types.

FRET Imaging by Laser Scanning Cytometry on Large Populations of Adherent Cells

The application of FRET (fluorescence resonance energy transfer) sensors for monitoring protein-protein interactions under vital conditions is attracting increasing attention in molecular and cell biology. Laser-scanning cytometry (LSC), a slide-based sister procedure to flow cytometry, provides an opportunity to analyze large populations of adherent cells or 2-D solid tissues in their undisturbed physiological settings. Here we provide an LSC-based three-laser protocol for high-throughput ratiometric FRET measurements utilizing cyan and yellow fluorescent proteins as a FRET pair. Membrane labeling with Cy5 dye is used for cell identification and contouring. Pixel-by-pixel and single-cell FRET efficiencies are calculated to estimate the extent of the molecular interactions and their distribution in the cell populations examined. We also present a non-high-throughput donor photobleaching FRET application, for obtaining the required instrument parameters for ratiometric FRET. In the biological model presented, HeLa cells are transfected with the ECFP- or EYFP-tagged Fos and Jun nuclear proteins, which heterodimerize to form active AP1 transcription factor.

Effect of velocity on microdroplet fluorescence quantified by laser-induced fluorescence

Microdroplets generated inside microfluidic devices have been widely used as miniaturized chemical and biological reactors allowing important reductions in experimental fluid volumes and making it possible to carry out high-throughput assays. Laser-induced fluorescence (LIF) is commonly used to detect and quantify the product, marker or cell content inside each individual droplet. In this work, we employed this technique to characterize the response of in-flow microdroplets filled with fluorescein dye at different laser powers and flow velocities. Using two parallel laser beams closely focused inside a microchannel we determined the microdroplet velocities and showed that the droplet fluorescence intensity decreases exponentially with reducing velocities because of the effects of photobleaching. In contrast, the fluorescence intensity increases linearly with laser power in the 4-10 mW range. When LIF is used for microdroplet measurements it is important to consider not just the fluorophore concentration but also the droplet velocity and laser power in the development of quantitative assays.

Photobleaching kinetics and time-integrated emission of fluorescent probes in cellular membranes

Since the pioneering work of Hirschfeld, it is known that time-integrated emission (TiEm) of a fluorophore is independent of fluorescence quantum yield and illumination intensity. Practical implementation of this important result for determining exact probe distribution in living cells is often hampered by the presence of autofluorescence. Using kinetic modelling of photobleaching combined with pixel-wise bleach rate fitting of decay models with an updated plugin to the ImageJ program, it is shown that the TiEm of a fluorophore in living cells can be determined exactly from the product of bleaching amplitude and time constant. This applies to mono-exponential bleaching from the first excited singlet and/or triplet state and to multi-exponential combinations of such processes. The TiEm can be used to correct for illumination shading and background autofluorescence without the need for fluorescent test layers or separate imaging of non-stained cells. We apply the method to simulated images and to images of cells, whose membranes were labelled with fluorescent sterols and sphingolipids. Our bleaching model can be extended to include a probability density function (PDF) of intrinsic bleach rate constants with a memory kernel. This approach results in a time-dependent bleach rate coefficient and is exemplified for fluorescent sterols in restricted intracellular environments, like lipid droplets. We show that for small deviations from the classical exponential bleaching, the TiEm of decay functions with rate coefficients remains largely independent of fluorescence lifetime and illumination, and thereby represents a faithful measure of probe distribution.

Microscopic oxygen imaging based on fluorescein bleaching efficiency measurements

Photobleaching of the fluorophore fluorescein in an aqueous solution is dependent on the oxygen concentration. Therefore, the time-dependent bleaching behavior can be used to measure of dissolved oxygen concentrations. The method can be combined with epi-fluorescence microscopy. The molecular states of the fluorophore can be expressed by a three-state energy model. This leads to a set of differential equations which describe the photobleaching behavior of fluorescein. The numerical solution of these equations shows that in a conventional wide-field fluorescence microscope, the fluorescence of fluorescein will fade out faster at low than at high oxygen concentration. Further simulation showed that a simple ratio function of different time-points during a fluorescence decay recorded during photobleaching could be used to describe oxygen concentrations in an aqueous solution. By careful choice of dye concentration and excitation light intensity the sensitivity in the oxygen concentration range of interest can be optimized. In the simulations, the estimation of oxygen concentration by the ratio function was very little affected by the pH value in the range of pH 6.5-8.5. Filming the fluorescence decay by a charge-coupled-device (ccd) camera mounted on a fluorescence microscope allowed a pixelwise estimation of the ratio function in a microscopic image. Use of a microsensor and oxygen-consuming bacteria in a sample chamber enabled the calibration of the system for quantification of absolute oxygen concentrations. The method was demonstrated on nitrifying biofilms growing on snail and mussel shells, showing clear effects of metabolic activity on oxygen concentrations.

A fluorescence based method for the quantification of surface functional groups in closed micro- and nanofluidic channels

Surface analysis is critical for the validation of microfluidic surface modifications for biology, chemistry, and physics applications. However, until now quantitative analytical methods have mostly been focused on open surfaces. Here, we present a new fluorescence imaging method to directly measure the surface coverage of functional groups inside assembled microchannels over a wide dynamic range. A key advance of our work is the elimination of self-quenching to obtain a linear signal even with a high density of functional groups. This method is applied to image the density and monitor the stability of vapor deposited silane layers in bonded silicon/glass micro- and nanochannels.

Visualization of Protein Interactions in Living Cells

Ligand binding to cell membrane receptors sets off a series of protein interactions that convey the nuances of ligand identity to the cell interior. The information may be encoded in conformational changes, the interaction kinetics and, in the case of multichain immunoreceptors, by chain rearrangements. The signals may be modulated by dynamic compartmentalization of the cell membrane, cellular architecture, motility, and activation-all of which are difficult to reconstitute for studies of receptor signaling in vitro. In this paper, we will discuss how protein interactions in general and receptor signaling in particular can be studied in living cells by different fluorescence imaging techniques. Particularly versatile are methods that exploit Förster resonance energy transfer (FRET), which is exquisitely sensitive to the nanometer-range proximity and orientation between fluorophores. Fluorescence correlation microscopy (FCM) can provide complementary information about the stoichiometry and diffusion kinetics of large complexes, while bimolecular fluorescence complementation (BiFC) and other complementation techniques can capture transient interactions. A continuing challenge is extracting from the imaging data the quantitative information that is necessary to verify different models of signal transduction.

Strength in numbers: effects of acceptor abundance on FRET efficiency

Fluorescence resonance energy transfer (FRET) is a strongly distance-dependent process between a donor and an acceptor molecule, which can be used for sensitive distance measurements and characterization of molecular interactions at the nanometer level. The original mathematical description of this process, however, is only valid for the interaction of one donor with one acceptor. This criterion is not always met, especially in biological systems, where multiple structures can interact simultaneously, often making distance estimations based on transfer efficiency values error-prone. Herein we investigate how the interaction of multiple acceptors and donors influences the transfer efficiency value in an intramolecular cellular FRET system by manipulating the fluorophore/protein ratio of the fluorophore-conjugated antibodies. We show that the labeling ratio of the acceptor has the largest influence on measured transfer efficiency and decreasing or increasing the acceptor labeling ratio can be utilized to manipulate the FRET response of the acceptor-donor pair and therefore is a tool for optimizing sensitivity of FRET measurements.

Overview of laser microbeam applications as related to antibody targeting

This chapter reviews several techniques which combine the use of laser microbeams with antibodies to study molecular and cellular biology. An overview of the basic properties of lasers and their integration with microscopes and computers is provided. Biophysical applications, such as fluorescence recovery after photobleaching to measure molecular mobility and fluorescence resonance energy transfer to measure molecular distances, as well as ablative applications for the selective inactivation of proteins or the selective killing of cells are described. Other techniques, such as optical trapping, that do not rely on the interaction of the laser with the targeting antibody, are also discussed.

Visualization of protein interactions in living cells

Ligand binding to cell membrane receptors sets off a series of protein interactions that convey the nuances ofligand identity to the cell interior. The information may be encoded in conformational changes, the interaction kinetics and, in the case of multichain immunoreceptors, by chain rearrangements. The signals may be modulated by dynamic compartmentalization of the cell membrane, cellular architecture, motility, and activation--all of which are difficult to reconstitute for studies of receptor signaling in vitro. In this chapter, we will discuss how protein interactions in general and receptor signaling in particular can be studied in living cells by different fluorescence imaging techniques. Particularly versatile are methods that exploit Förster resonance energy transfer (FRET), which is exquisitely sensitive to the nanometer-range proximity and orientation between fluorophores. Fluorescence correlation microscopy (FCM) can provide complementary information about the stoichiometry and diffusion kinetics of large complexes, while bimolecular fluorescence complementation (BiFC) and other complementation techniques can capture transient interactions. A continuing challenge is extracting from the imaging data the quantitative information that is necessary to verify different models of signal transduction.

Two-dimensional receptor patterns in the plasma membrane of cells. A critical evaluation of their identification, origin and information content

A concise review is presented on the nature, possible origin and functional significance of cell surface receptor patterns in the plasma membrane of lymphoid cells. A special emphasize has been laid on the available methodological approaches, their individual virtues and sources of errors. Fluorescence energy transfer is one of the oldest available means for studying non-randomized co-distribution patterns of cell surface receptors. A detailed and critical description is given on the generation of two-dimensional cell surface receptor patterns based on pair-wise energy transfer measurements. A second hierarchical-level of receptor clusters have been described by electron and scanning force microscopies after immuno-gold-labeling of distinct receptor kinds. The origin of these receptor islands at a nanometer scale and island groups at a higher hierarchical (mum) level, has been explained mostly by detergent insoluble glycolipid-enriched complexes known as rafts, or detergent insoluble glycolipids (DIGs). These rafts are the most-likely organizational forces behind at least some kind of receptor clustering [K. Simons et al., Nature 387 (1997) 569]. These models, which have great significance in trans-membrane signaling and intra-membrane and intracellular trafficking, are accentuating the necessity to revisit the Singer-Nicolson fluid mosaic membrane model and substitute the free protein diffusion with a restricted diffusion concept [S.J. Singer et al., Science 175 (1972) 720].

Modulation of Fluorescence through Coassembly of Molecules in Organic Nanostructures

This paper describes the fluorescence of bimolecular coassemblies that form one-dimensional nanostructures. One molecule is a fluorescent peptide amphiphile containing its branched stilbene chromophore covalently linked to the hydrophilic end of the amphiphile, and the second molecule is a shorter, nonfluorescent peptide amphiphile of complementary charge. Using circular dichroism we observe that mixing both molecules results in coassemblies that exhibit a beta-sheet signature in the peptide region indicative of these types of nanostructures. The nature of the coassembly is dependent on the molar ratio of each component, and the changing CD spectra suggest the formation of domains along the length of the nanofibers with decreasing concentrations of the fluorescent component. In coassemblies with dilute concentrations of the fluorophore, we observe an increase in fluorescence intensity and quantum yield, as well as chiral transfer to the achiral segment of the fluorescent peptide amphiphile. The coassemblies studied containing a fluorescent component at a low molar ratio exhibit fluorescence resonance energy transfer to fluorescent acceptors in solution. When the nonfluorescent peptide amphiphile component is designed to bind the important bioactive polysaccharide heparin, a selective transfer of energy is observed between fluorescein-tagged heparin and the coassemblies in both dilute solution and in macroscopic gels.

Microspectroscopic fluorescence analysis with prism-based imaging spectrometers: review and current studies

BACKGROUND

Fluorescence imaging spectroscopy is a powerful but under-utilized tool. This article gives perspective on the use of imaging spectroscopy, and provides two examples of imaging spectroscopy done with a prism-based system. The intent is to give insight into the power of imaging spectroscopy when used in combination with other imaging techniques. In particular, studies of intact coral photobleaching and beads designed to show energy transfer are reported. In the bead study, spectroscopic lifetime imaging was performed at each photobleaching step.

RESULTS

Spectroscopic photobleaching of the hard coral, Montastrea annularis, revealed two spectral regions. A region in the red portion of the spectrum bleached rapidly while progressively increasing fluorescence was observed over a wide portion of the spectrum. This behavior is consistent with current theories for the role of fluorescent proteins in corals. Following a photobleaching study of beads designed to exhibit energy transfer with imaging spectroscopic fluorescence lifetime imaging microscopy (ISFLIM) allowed unambiguous assignment of fluorescence resonance energy transfer (FRET). The data in this experiment indicated that most of the commonly used markers of FRET would have been inconclusive. The ability of the ISFLIM to look at all regions of the spectrum, particularly the acceptor region, allowed FRET to be assigned.

CONCLUSIONS

Fluorescence imaging spectroscopy is a rapidly advancing technology, uniquely suited to the flexible detection of dyes over a wide range of wavelengths.

Steady-state fluorescence quenching applications for studying protein structure and dynamics

Fluorescence quenching methods are useful to obtain information about the conformational and/or dynamic changes of proteins in complex macromolecular systems. In this review steady-state methods are described and the data interpretation is thoroughly discussed. As a special case of fluorescence quenching mechanism, fluorescence resonance energy transfer (FRET) phenomenon is also presented. Application of a FRET based method to characterize the temperature dependence of the flexibility of protein matrix is clearly demonstrated.

Nanoparticle energy transfer on the cell surface

Membrane topology of receptors plays an important role in shaping transmembrane signalling of cells. Among the methods used for characterizing receptor clusters, fluorescence resonance energy transfer between a donor and acceptor fluorophore plays a unique role based on its capability of detecting molecular level (2-10 nm) proximities of receptors in physiological conditions. Recent development of biotechnology has made possible the usage of colloidal gold particles in a large size range for specific labelling of cells for the purposes of electron microscopy. However, by combining metal and fluorophore labelling of cells, the versatility of metal-fluorophore interactions opens the way for new applications by detecting the presence of the metal particles by the methods of fluorescence spectroscopy. An outstanding feature of the metal nanoparticle-fluorophore interaction is that the metal particle can enhance spontaneous emission of the fluorophore in a distance-dependent fashion, in an interaction range essentially determined by the size of the nanoparticle. In our work enhanced fluorescence of rhodamine and cyanine dyes was observed in the vicinity of immunogold nanoparticles on the surface of JY cells in a flow cytometer. The dyes and the immunogold were targetted to the cell surface receptors MHCI, MHCII, transferrin receptor and CD45 by monoclonal antibodies. The fluorescence enhancement was sensitive to the wavelength of the exciting light, the size and amount of surface bound gold beads, as well as the fluorophore-nanoparticle distance. The intensity of 90 degrees scattering of the incident light beam was enhanced by the immunogold in a concentration and size-dependent fashion. The 90 degrees light scattering varied with the wavelength of the incident light in a manner characteristic to gold nanoparticles of the applied sizes. A reduction in photobleaching time constant of the cyanine dye was observed in the vicinity of gold particles in a digital imaging microscope. Modulations of 90 degrees light scattering intensity and photobleaching time constant indicate the role of the local field in the fluorescence enhancement. A mathematical simulation based on the electrodynamic theory of fluorescence enhancement showed a consistency between the measured enhancement values, the inter-epitope distances and the quantum yields. The feasibility of realizing proximity sensors operating at distance ranges larger than that of the conventional Forster transfer is demonstrated on the surface of living cells.

Following FRET through five energy transfer steps: spectroscopic photobleaching, recovery of spectra, and a sequential mechanism of FRET

We report the acquisition and analysis of spectrally resolved photobleaching data from a model system designed to exhibit FRET. Spectrally resolved photobleaching can be used to determine the presence of FRET in these systems and to investigate multi-step mechanisms of energy transfer. The model system was a previously described set of fluorescent beads consisting of a system of six fluorophores. In standard photobleaching experiments to determine FRET, bleaching of an acceptor molecule resulting in recovery of donor intensity or changes in photobleaching kinetics are used as indicators of FRET. Here, we use the Bateman equations to model growth and decay in a photobleaching experiment. Linked donor-acceptor growth and decay is used as an indicator of FRET. The apparatus required is relatively simple when compared to lifetime imaging systems. Several data analysis strategies, rigorous model building, global fitting procedures, and error analysis are presented. Using these procedures a five-step sequential mechanism of energy transfer was selected for these beads.

Photobleaching-corrected FRET efficiency imaging of live cells

Fluorescent resonance energy transfer (FRET) imaging techniques can be used to visualize protein-protein interactions in real-time with subcellular resolution. Imaging of sensitized fluorescence of the acceptor, elicited during excitation of the donor, is becoming the most popular method for live FRET (3-cube imaging) because it is fast, nondestructive, and applicable to existing widefield or confocal microscopes. Most sensitized emission-based FRET indices respond nonlinearly to changes in the degree of molecular interaction and depend on the optical parameters of the imaging system. This makes it difficult to evaluate and compare FRET imaging data between laboratories. Furthermore, photobleaching poses a problem for FRET imaging in timelapse experiments and three-dimensional reconstructions. We present a 3-cube FRET imaging method, E-FRET, which overcomes both of these obstacles. E-FRET bridges the gap between the donor recovery after acceptor photobleaching technique (which allows absolute measurements of FRET efficiency, E, but is not suitable for living cells), and the sensitized-emission FRET indices (which reflect FRET in living cells but lack the quantitation and clarity of E). With E-FRET, we visualize FRET in terms of true FRET efficiency images (E), which correlate linearly with the degree of donor interaction. We have defined procedures to incorporate photobleaching correction into E-FRET imaging. We demonstrate the benefits of E-FRET with photobleaching correction for timelapse and three-dimensional imaging of protein-protein interactions in the immunological synapse in living T-cells.

Using live FRET imaging to reveal early protein–protein interactions during T cell activation

The emerging challenge for proteomics in general and lymphocyte biology in particular is to understand protein-protein interactions in the dynamic context of the living cell. Particularly interesting are the molecular dynamics of the T cell receptor-CD3 complex and other immunoreceptors in immune synapses. Fluorescence (or Förster) resonance energy transfer (FRET) is one of the few techniques that are capable of giving dynamic information about the nanometer-range proximity between molecules, as opposed to simply the subcellular co-localization that is provided by fluorescence microscopy. Spectral changes in fluorescence intensity and down modulation of donor lifetime are the basis for rapidly developing approaches to real-time FRET imaging. With two-photon excitation, FRET can now be extended to in vivo imaging.

New trends in studying structure and function of biological membranes

Thirty years ago Singer and Nicolson constructed the "fluid mosaic model" of the membrane, which described the structural and functional characteristics of the plasma membrane of non-polarized cells like circulating blood lymphocytes as a fluid lipid phase accommodating proteins with a relatively free mobility. It is a rare phenomenon in biology that such a model could survive 30 years and even today it has a high degree of validity. However, in the light of new data it demands some modifications. In this minireview we present a new concept, which revives the SN model, by shifting the emphasis from fluidity to mosaicism, i.e. to lipid microdomains and rafts. A concise summary of data and key methods is given, proving the existence of non-random co-distribution patterns of different receptor kinds in the microdomain system of the plasma membrane. Furthermore we present evidence that proteins are not only accommodated by the lipid phase, but they are integral structural elements of it. Novel suggestions to the SN model help to develop a modernized version of the old paradigm in the light of new data.

Fluorescence lifetime-resolved imaging: measuring lifetimes in an image

We have given an overview of what one can gain by lifetime-resolved imaging and reviewed the major issues concerning lifetime-resolved measurements and FLI instrumentation. Instead of giving diverse selected examples, we have discussed the underlying basic pathways of deexcitation available to the molecules in the excited state. It is by traversing these pathways that compete kinetically with the fluorescence pathway of deactivation--and therefore affect the measured fluorescence lifetime--that we gain the information that lifetime-resolved fluorescence provides. It is hoped that being aware of the diversity, of pathways available to an excited fluorophore will facilitate potential users to recognize the value of FLI measurements and inspire innovative experiments using lifetime-resolved imaging. FLI gives us the ability within a fluorescence image of measuring and quantifying dynamic events taking place in the immediate surroundings of fluorophores as well as locating the fluorescent components within the image. Just as measurements in cuvettes, lifetime-resolved imaging extends considerably the potential information that can be derived from a fluorescence experiment. Our purpose has been to arouse an appreciation for the broad application of fluorescence lifetime-resolved measurements in imaging. We have given only general design characteristics of the instrumentation and discussed the characteristics that distinguish imaging from the single channel lifetime-resolved measurements. We have not provided details of the instrumentation or the presented many examples. These are available in the literature, and given in the references, and they are continually and rapidly growing.

Multivalent structure of an alphabetaT cell receptor

Whether there is one or multiple alphabetaT cell antigen receptor (TCR) recognition modules in a given TCR/CD3 complex is a long-standing controversy in immunology. We show that T cells from transgenic mice that coexpress comparable amounts of two distinct TCRbeta chains incorporate at least two alphabetaTCRs in a single TCR/CD3 complex. Evidence for bispecific alphabetaTCRs was obtained by immunoprecipitation and immunoblotting and confirmed on the surface of living cells both by fluorescence resonance energy transfer and comodulation assays by using antibodies specific for TCRbeta-variable regions. Such (alphabeta)2TCR/CD3 or higher-order complexes were evident in T cells studied either ex vivo or after expansion in vitro. T cell activation is thought by many, but not all, to require TCR cross-linking by its antigen/major histocompatibility complex ligand. The implications of a multivalent (alphabeta)2TCR/CD3 complex stoichiometry for the ordered docking of specific antigen/major histocompatibility complex, CD4, or CD8 coreceptors and additional TCRs are discussed.

Analysis of vertical fluorescence resonance energy transfer from the surface of a small-diameter sphere

Fluorescence resonance energy transfer (FRET) measurements have been used to analyze fluorophore separations in a number of varying geometries, including small particles and extended surfaces. This study focuses on the geometry created by a donor extended above the surface of a small sphere (radius < R0), where the acceptors are integrated into the sphere surface. The model of this geometry was based on an amphipathic molecule with its lipophilic region integrated into a detergent micelle and its hydrophilic region extending outward from the micelle surface, where the donor fluorophore is attached to the hydrophilic region of the molecule. Based on random acceptor incorporation into the micelle, a Poisson distribution was used to calculate the distribution of acceptor probes across the micelle population. The model converges to RET on a flat surface when the radius of the micelle exceeds 0.8 R0. The model was also used to simulate FRET data showing that the positions of donors above the micelle surface could be uniquely resolved. Experimental verification of the model was achieved in a sulfobetaine palmitate micelle with fluorescein isothiocyanate donors attached to detergent-solubilized lipopolysaccharide (LPS) and lipophilic Fast-DiI acceptors. The use of steady-state analysis allowed resolution of cases in which donors were located at different distances from the surface. Combining steady-state with excited-state lifetime analysis allowed resolution of cases where there was a combination of distances. Given the large number of biomolecules that interact with lipids, this approach may prove generally useful for defining molecular conformation.

Imaging fluorescence correlation spectroscopy: nonuniform IgE distributions on planar membranes

Fluorescence correlation spectroscopy is useful for detecting and characterizing molecular clusters that are smaller than or approximately equal to optical resolution in size. Here, we report the development of an approach in which the pixel-to-pixel fluorescence fluctuations from a single fluorescence image are spatially autocorrelated. In these measurements, tetramethylrhodamine-labeled, anti-trinitrophenyl IgE antibodies were specifically bound to substrate-supported planar membranes composed of trinitrophenyl-aminocaproyldipalmitoylphosphatidylethanolamine and dipalmitoylphosphatidylcholine. The antibody-coated membranes were illuminated with the evanescent field from a totally internally reflected laser beam, and the fluorescence arising from the IgE-coated membranes was recorded with a cooled CCD camera. The image was corrected for the elliptical Gaussian shape of the evanescent illumination after background subtraction. The spatial autocorrelation functions of the resulting images generated two useful parameters: the extrapolated initial values, which were related to the average cluster intensity and density; and the correlation distances, which were related to the average cluster size. These parameters varied with the IgE density, and unlabeled polyclonal anti-IgE enhanced the nonuniform IgE distributions. The autocorrelation functions calculated from images of planar membranes containing fluorescently labeled lipids rather than bound, labeled IgE demonstrated that the spatial nonuniformities were prominent only in the presence of IgE. Fluorescent beads were used to demonstrate the principles and the methods.

Proximity relationships between the type I receptor for Fc epsilon (Fc epsilon RI) and the mast cell function-associated antigen (MAFA) studied by donor photobleaching fluorescence resonance energy transfer microscopy

Clustering of the mast cell function-associated antigen (MAFA) on the surface of rat mucosal type mast cells line 2H3 (RBL-2H3) leads to suppression of the secretory response induced by the type I Fc epsilon receptor (Fc epsilon RI). In order to establish a possible association between MAFA and Fc epsilon RI we measured fluorescence resonance energy transfer (FRET) between the MAFA-specific monoclonal antibody (mAb) G63 and Fc epsilon RI-bound ligands as well as between Fc epsilon RI-bound ligands themselves using the donor photobleaching FRET (pbFRET) technique. Average FRET efficiencies between 6 and 9% were determined after low-temperature incubation with fluorescent dye conjugated mAb G63 bound to MAFA (donor) and IgE bound to Fc epsilon RI (acceptor) on RBL-2H3 cells. Subsequent cross-linking of IgE by a polyvalent antigen caused no change in FRET efficiencies. These results suggest that the MAFA is located in the vicinity of the Fc epsilon RI on resting cells, and that clustering of the Fc epsilon RI leads to no significant change in the proximity of the two molecular species. In view of the sequence motif identified in the cytosolic tail of the MAFA and the observed changes in its phosphorylation upon antigen stimulation (Guthmann et al., Proc. Natl. Acad. Sci. USA 1995, 92: 9397-9401), the present study suggests that the secretory response inhibition by MAFA interferes with the signal transduction cascade initiated via the Fc epsilon RI. An additional finding was that clustering of the Fc epsilon RI by antigen showed a clear increase in the efficiency of FRET between Fc epsilon RI-bound IgE molecules conjugated with fluorescent donor and acceptor.

Plasma-membrane-bound macromolecules are dynamically aggregated to form non-random codistribution patterns of selected functional elements. Do pattern recognition processes govern antigen presentation and intercellular interactions?

Molecular recognition processes between cell surface elements are discussed with special reference to cell surface pattern formation of membrane-bound integral proteins. The existence, as detected by flow cytometric resonance energy transfer (Appendix), and significance of cell surface patterns involving the interleukin-2 receptor, the T-cell receptor-CD3 system, the intercellular adhesion molecule ICAM-1, and the major histocompatibility complex class I and class II molecules in the plasma membrane of lymphocytes are described. The modulation of antigen presentation by transmembrane potential changes is discussed, and a general role of transmembrane potential changes, and therefore of ion channel activities, adduced as one of the major regulatory mechanisms of cell-cell communication. A general role in the mediation and regulation of intercellular interactions is suggested for cell-surface macromolecular patterns. The dynamic pattern of protein and lipid molecules in the plasma membrane is generated by the genetic code, but has a remarkable flexibility and may be one of the major instruments of accommodation and recognition processes at the cellular level.

Photobleaching kinetics of fluorescein in quantitative fluorescence microscopy

An investigation on the photobleaching behavior of fluorescein in microscopy was carried out through a systematic analysis of photobleaching mechanisms. The individual photochemical reactions of fluorescein were incorporated into a theoretical analysis and mathematical simulation to study the photochemical processes leading to photobleaching of fluorescein in microscopy. The photobleaching behavior of free and bound fluorescein has also been investigated by experimental means. Both the theoretical simulation and experimental data show that photobleaching of fluorescein in microscopy is, in general, not a single-exponential process. The simulation suggests that the non-single-exponential behavior is caused by the oxygen-independent, proximity-induced triplet-triplet or triplet-ground state dye reactions of bound fluorescein in microscopy. The single-exponential process is a special case of photobleaching behavior when the reactions between the triplet dye and molecular oxygen are dominant.

Luminescence quenching by long range electron transfer: a probe of protein clustering and conformation at the cell surface

Quenching of luminescence from fluorescent and phosphorescent probes by nitroxide spin labels with a long range electron transfer (LRET) mechanism (44,45) has been tested as a tool to monitor association/clustering and conformational changes of cell surface proteins. The membrane proteins were labeled with monoclonal antibodies or Fab fragments conjugated with luminescent probes or water-soluble nitroxide spin labels. The method was tested as a probe of 3 different aspects of protein-protein association involving class I MHC molecules: (1) interaction between the heavy and light chains of the MHC molecules, (2) clustering, self-association of MHC molecules, (3) proximity of MHC molecules to transferrin receptors of fibroblasts or surface immunoglobulin molecules of B lymphoblasts. The extent of quenching upon increasing the fractional density of the quencher was sensitive for protein association in accordance with earlier immunoprecipitation and flow cytometric Förster-type energy transfer (FCET) data obtained on the same cells. These data suggest that the LRET quenching can be used as intra- or intermolecular ruler in a 0.5-2.5 nm distance range. This approach is simpler (measurements only on donor side) and faster than many other experimental techniques in screening physical association or conformational changes of membrane proteins by means of spectrofluorimetry, flow cytometry, or microscope based imaging.

Cross-linking of CD4 in a TCR/CD3-juxtaposed inhibitory state: a pFRET study

Instances when T cell activation via the T cell receptor/CD3 complex is suppressed by anti-CD4 Abs are generally attributed either to the topological separation of CD4-p56lck from CD3, or their improper apposition. Photobleaching fluorescence resonance energy transfer measurements permitted direct analysis of these alternatives on human peripheral blood lymphocytes. Distinction between changes of relative antigen densities or positioning was made possible by simultaneously recording donor and acceptor fluorescence in the energy transfer experiment performed on homogeneous populations of flow-sorted cells. We show here that CD4 stays in the molecular vicinity of CD3, while anti-CD3 stimulation is suppressed by anti-CD4 or cross-linked HIV gp120. Our data suggest that cross-linking of CD4 through particular epitopes is capable of inhibiting activation driven by Abs binding to specific sites on CD3 without major topological sequestration of the Ags, in such a way that additional positive signals will also be affected. Thus, these and other related cases of negative signaling via CD4 may be interpreted in terms of functional uncoupling rather than a wide physical separation of CD4 from the T cell receptor-CD3 complex.

Structural hierarchy in the clustering of HLA class I molecules in the plasma membrane of human lymphoblastoid cells

Major histocompatibility complex (MHC) class I antigens in the plasma membranes of human T (HUT-102B2) and B (JY) lymphoma cells were probed by immunochemical reagents using fluorescence, transmission electron, and scanning force microscopies. Fluorescent labels were attached to monoclonal antibodies W6/32 or KE-2 directed against the heavy chain of HLA class I (A, B, C) and L368 or HB28 against the beta 2-microglobulin light chain. The topological distribution in the nanometer range was studied by photobleaching fluorescence resonance energy transfer (pbFRET) on single cells. A nonrandom codistribution pattern of MHC class I molecules was observed over distances of 2-10 nm. A second, nonrandom, and larger-scale topological organization of the MHC class I antigens was detected by indirect immunogold labeling and imaging by transmission electron microscopy (TEM) and scanning force microscopy (SFM). Although some differences in antigen distribution between the B- and T-cell lines were detected by pbFRET, both cell lines exhibited similar clustering patterns by TEM and SFM. Such defined molecular distributions on the surfaces of cells of the immune system may reflect an underlying specialization of membrane lipid domains and fulfill important functional roles in cell-cell contacts and signal transduction.

The L-selectin (Leu8) molecule is associated with the TcR/CD3 receptor; fluorescence energy transfer measurements on live cells

Several accessory molecules were shown to play important roles in T cell functions and be in close proximity to the T cell receptor (TcR/CD3). The L-selectin molecule (Leu8, LAM1-1, LECAM1) also plays an important role in lymphocyte homing and proliferation. We were interested in determining the proximity of this molecule to the TcR/CD3 complex on live peripheral human T cells. Using a fluorescence energy transfer method, designed to study individual cells, we could show that L-selectin is within 170 A of the TcR/CD3 complex. Monoclonal antibody directed against the LAM1-1 (Leu8) epitope of the L-selectin molecule suppressed the mitogenic activity of antibodies specific for various CD3 epitopes in vitro. Intracellular Ca2+ mobilization obtained with wt31 followed by cross-linking antibody or with anti-CD3 was not influenced by anti-Leu8 antibody. Also antibody directed against the LAM1-1 epitope did not influence the binding of the mitogenic antibodies, as shown by fluorescence-based flow cytometry. Therefore, we suggest that binding of TcR/CD3 bound mitogenic antibodies to accessory cell Fc receptors may be hindered by antibodies bound to the close proximity L-selectin molecules.

Specific disengagement of cell-bound anti-LAM-1 (anti-L-selectin) antibodies by aurintricarboxylic acid

Brief treatment of human peripheral blood lymphocytes with the potential anti-HIV compound aurintricarboxylic acid (ATA) prompts the selective release of already bound L-selectin-specific anti-Leu8 and anti-LAM1-1 antibodies from the cells. Two other anti-LAM1 antibodies, anti-LAM1-3 and anti-LAM1-5 stay antigen-bound at the same time. Interestingly, the ATA-sensitive anti-Leu8 strongly competes with the ATA-resistant anti-LAM1-3 for binding. Photobleaching fluorescence resonance energy transfer (pFRET) measurements on flow-sorted cells suggests that these two antibodies compete for the same epitope, while anti-LAM1-5-FITC and anti-Leu8-PE bind to distinct sites, although they also compete for binding. Combining the data on competition, pFRET and ATA effect, we suggest that the ATA sensitive anti-Leu8 and resistant anti-LAM1-3 bind to overlapping but non-identical epitopes. This remarkably specific effect may be exploited for designing anti-inflammatory drugs that modulate leukocyte adhesion.

Protein dynamics and fluorescence quenching

There are both theoretical and experimental data which strongly suggest that the intramolecular dynamics of the protein matrix play an important role in protein functions. The interrelationship between theory and experiments is rather weak mainly because of the lack of relevant experimental methods and (model-dependent) misinterpretation of experimental data. We give a short account of a few fluorescence-quenching techniques that can provide adequate information concerning protein dynamics provided that the experimental data sets are correctly processed.

Dynamic physical interactions of plasma membrane molecules generate cell surface patterns and regulate cell activation processes

Molecular interaction and transmembrane signal transducing events generate a very dynamic and ever changing "pattern" in the plasma membranes. Lymphocytes, the key functional elements of the immune system, are eminently suited to be the primary targets to investigate these proximity, mobility, or other physical-chemical changes in their plasma membranes. Recently, a number of experiments suggested that processed peptides from antigens can bind specific components of MHC molecules (Elliott et al., 1991). This is certainly a way to alter their structure. Cell surface patterns of topological nature, assembly and disassembly of oligomeric receptor structure like the IL-2 receptor have been investigated by sophisticated biophysical techniques. The dynamic changes in the two-dimensional cell surface pattern and intramolecular conformational changes within this "larger" macro-pattern may have a strong regulatory role in signal transducing and intercellular recognition processes. Recent data on these problems are presented together with brief and critical discussions.