Application and comparison of derivatized cellulose and amylose chiral stationary phases for the separation of enantiomers of pharmaceutical compounds by high-performance liquid chromatography

Effect of Various Parameters and Mechanism of Reversal Order of Elution in Chiral HPLC

Background:

Chiral separation involves many phenomena in which the elution order of the enantiomers has its unique position. The phenomenon of elution order of the enantiomers has also been used in the determination of optical purity which is favorable to elute the major component after minor enantiomeric impurity but the main problem is that, this phenomenon is rare.

Results:

This review rumors the reversal order of elution of many chiral molecules in HPLC. Besides, this review pronounces the effects of pH, derivatisation of drugs, the composition of the mobile phase, and temperature on the reversal order of elution of chiral drugs. The efforts are also made to discuss the possible future perspectives of reversal order of elution.

Conclusion:

Various parameters such as pH, mobile phase composition, temperature, and chemical structure of the analytes play a role in the phenomena of the reversal order of elution of many chiral molecules which are discussed in the article.

Liquid Chromatographic Enantioseparation of Some Fluoroquinoline Drugs Using Several Polysaccharide-Based Chiral Stationary Phases

The enantioseparation of three fluoroquinoline antibacterial drugs, namely, flumequine, ofloxacin and lomefloxacin using high-performance liquid chromatography was optimized on seven polysaccharide-derived chiral stationary phases, namely, Chiralpak® IB, chiralpak® IA, Chiralpak® AD, Chiralcel® OJ, Chiralcel® OD, Chiralcel® OD-H and Chiralcel® OZ-3 and applying different mobile phases in isocratic mode is described. The role of addition of organic additives was also investigated. A baseline separation of flumequine, ofloxacin and lomefloxacin enantiomers was achieved. Parameters influencing enantioseparation including mobile phase, organic additive and chemical nature of the chiral selector found to be highly influencing on the enantiomeric separation were investigated. Chiral recognition mechanism(s) are also presented.

Study on the HPLC-based separation of some ezetimibe stereoisomers and the underlying stereorecognition process

The enantioseparation of ezetimibe stereoisomers by high-performance liquid chromatography on different chiral stationary phases, ie, 3 polysaccharide-based chiral columns, was studied. It was observed that cellulose-based Chiralpak IC column exhibited the best resolving ability. After the optimization of mobile phase compositions in both normal and reversed phase modes, satisfactory separation could be obtained on Chiralpak IC column, especially in normal phase mode. The use of prohibited solvents as nonstandard mobile phase gave rise to better resolution than that of standard mobile phases (n-hexane/alcohol system). In addition, the presence of ethanol in nonstandard mobile phase has played an important role in enhancing chromatographic efficiency and resolution between ezetimibe stereoisomers. Various attempts were made to comprehensively compare the chiral recognition capabilities of immobilized versus coated polysaccharide-based chiral columns, amylose-based versus cellulose-based chiral stationary phases, reversed versus normal phase modes, and standard versus nonstandard mobile phases. Moreover, possible solute-mobile phase-stationary phase interactions were derived to explain how stationary and mobile phases affected the separation. Then the method validation with respect to selectivity, linearity, precision, accuracy, and robustness was carried out, which was demonstrated to be suitable and accurate for the quantitative determination of (RRS)-ezetimibe impurity in ezetimibe bulk drug.

Chiral selectors in CE: recent developments and applications

This review article provides an overview of the recent advances in enantioanalysis by use of electrophoretic techniques. Due to the big number of publications in the subject mentioned above, this article is focused on chiral method developments and applications published from 2008 until 2011, and it demonstrates chiral selectors used in CE. Numerous chiral selectors have been used over the years, and these include the cyclic and the linear oligo- and polysaccharides, the branched polysaccharides, the polymeric and monomeric surfactants, the macrocyclic and other antibiotics, and the crown ethers. Different dual-selector systems are also presented in this article, and the results are compared with those obtained by use of a single chiral selector. Finally, several pharmaceutical and biomedical applications based on chiral recognition are summarized.

Semipreparative enantioseparation of methamidophos by HPLC-UV and preliminary in vitro study of butyrylcholinesterase inhibition

Many chiral pesticides are introduced into the environment as racemates, although their pesticidal activity is usually the result of preferential reactivity of only one enantiomer, while the other enantiomer may have toxic effects against nontarget organisms. Methamidophos (O,S-dimethyl phosphoramidothioate), a chiral compound, is an insecticide widely used in agriculture in both developed and developing countries. However, this pesticide has a high toxicity not only to targeted insects but also to human and animals. In the present study, the enantiomers of methamidophos were enantiomerically separated by a semipreparative chiral liquid chromatography at the multimilligram scale on a polysaccharide-based chiral stationary phase and a preliminary evaluation of their in vitro inhibition of plasma butyrylcholinesterase (BChE) of hens was performed. In the present study, our first effort was to resolve the racemic mixture of methamidophos and to that end reversed-phase, normal-phase, and polar organic elution conditions were investigated in four different polysaccharide-based chiral phases. The best performance was achieved on a cellulose tris(3,5-dimethylphenylcarbamate) phase under normal phase. This chromatographic condition allowed the separation of 225 mg of methamidophos enantiomers with a high degree of chiral purity (>98%) in a short analysis time. Significant differences were found between the concentration that causes 50% of enzyme inhibition (IC50) of the three isoforms of methamidophos. (-)-Methamidophos showed an IC50 approximately three times larger than the (+)-enantiomer for plasma BChE of hens.

Preparation and chromatographic properties of a multimodal chiral stationary phase based on phenyl-carbamate-propyl-beta-CD for HPLC

A phenylcarbamate derivative of 2-hydroxypropyl-beta-CD bonded stationary phase was prepared by a previously described method. Its enantiomeric recognition abilities were evaluated as chiral stationary phase (CSP) in normal, polar organic and RP conditions by HPLC. The relevant structural features of the prepared stationary phase which make it an effective chiral selector are discussed. This material seems to have an excellent enantioselectivity for a variety of racemic analytes in the three modes. Hence it can be considered a highly effective multimodal column. Retention factor (k), selectivity (alpha) and resolution (R(s)) were the chosen parameters to describe the column performance. Optimization of these separations was discussed in terms of mobile phase composition, flow rate and structural patterns of the injected analytes.

Use of chemical fingerprinting to establish the presence of spilled crude oil in a residential area following Hurricane Katrina, St. Bernard Parish, Louisiana

Hurricane Katrina's storm surge displaced and damaged a 250,000 barrel storage tank causing a Nigerian crude oil blend (API 36.4 degrees) to be released and dispersed into the adjacent evacuated residential area by the retreating floodwaters. The subsequent environmental assessment involved sampling and chemical fingerprinting of nearly 15,000 wipe and soil samples collected both inside and outside of buildings to determine which properties were impacted by the spilled crude oil. Tier 1 qualitative analysis of gas chromatograms and Tier 2 quantitative (revised Nordtest-type) and qualitative (ASTM D5739-type) analysis of petroleum biomarkers revealed the extent of crude oil contamination-as well as the widespread occurrence of hydrocarbons derived from (i) lubricating, hydraulic, and transmission oils, most likely from vehicles in the flooded area, and (ii) allochthonous natural organic matter (NOM) from the surrounding bayous. Conventional oil spill fingerprinting protocols and two-component mixing models (crude oil/lube oil and crude oil/NOM) were used to confirm the presence of the spilled crude oil-even when mixed at low concentrations with other hydrocarbon sources-as a means to develop and govern a settlement and remedial program with the affected property owners.

Determining the extent of biodegradation of fuels using the diastereomers of acyclic isoprenoids

Improved testing and remediation procedures for sites contaminated with petroleum hydrocarbons are a priority in remote cold regions such as Antarctica, where costs are higher and remediation times are longer. Isoprenoid/n-alkane ratios are commonly used to determine the extent of biodegradation at low levels but are not useful once the n-alkanes have been removed. This study demonstrates how the diastereomers of the acyclic isoprenoids can be used to determine the extent of biodegradation in moderately biodegraded fuel in soils from a bioremediation trial at Casey Station, Antarctica. The biological diastereomers of pristane (meso; RS = SR) are depleted more rapidly during moderate biodegradation than the geological or mature diastereomers (RR and SS), and thus, the ratio of pristane diastereomers can determine the level of biodegradation. The statistical difference among mean diastereomer ratios for samples grouped according to the biodegradation scale and pristane/phytane ratios was highly significant. The ratios of norpristane and phytane diastereomers also change with biodegradation in a similar fashion, and different levels of sensitivity exist for each. Additional benefits are that the method can be performed on conventional gas chromatographs by non-specialist chemists and that the ratios are independent of evaporation and do not necessarily require a non-biodegraded reference (T0) sample. This study details a simple alternative method for determining the extent of biodegradation of fuels at moderate levels that can be applied to a wide range of petroleum products.

Direct high-performance liquid chromatographic separation of the enantiomers of an aromatic amine and four aminoalcohols using polysaccharide chiral stationary phases and acidic additive

The HPLC enantiomeric separation of N-benzyl-alpha-methyl-benzylamine, phenylalaninol, tryptophanol, 2 (diphenylhydroxymethyl)pyrrolidine, and isoproterenol was accomplished in the normal-phase mode using two polysaccharide-derived chiral stationary phases (CSPs) and various n-hexane/2-propanol mobile phases with acidic (TFA) or basic (DEA) additive. The compounds were separated without any derivatization and separation factor range between 2.09 and 1.09 with resolution factor 3.4 and 0.4, respectively. The best separation of the enantiomers of the amine was achieved on amylose tris (3, 5-dimethylphenylcarbamate) CSP with TFA additive in the mobile phase; in acidic conditions, instead, the best enantioseparation of the aminoalcohols was achieved on cellulose tris (3, 5-dimethylphenilcarbamate). A long equilibration time of the CSP when switching from an undoped mobile phase to a doped one is required to obtain reproducible results.

Forensic fingerprinting of diamondoids for correlation and differentiation of spilled oil and petroleum products

Diamondoids (adamantanes and diamantanes) are rigid, three-dimensionallyfused cyclohexyl-ring alkane compounds that can be found in almost all crude oils and in most petroleum products. Forforensic environmental investigations, the most commonly used biomarkers are high molecular weight (MW) tri- to pentacyclic terpanes and steranes. Most of these high MW biomarkers, however, are removed from the original crude oil feedstocks during the refining processes, while smaller biomarkers including diamondoids are concentrated in petroleum products. Fingerprinting diamondoids could thus provide another diagnostic means for correlation and differentiation of spilled oils and be particularly valuable for light to midrange distillates, such as jet and diesel fuels, the source of which may be difficult to identify using routine biomarker techniques. In this work, a reliable GC-MS analytical method has been developed for characterization and quantitation of diamondoids. The method detection limits for five target diamondoids were determined to be in the range of 0.06-0.14 microg/g oil. Distributions of diamondoids in over 100 different oils and refined products were quantitatively compared. The concentrations of four groups of target biomarkers were found, in general, to decrease in the order of sesquiterpanes > terpanes and steranes > adamantanes > diamantanes in both crude oils and refined products. A number of indices of admantanes and diamantanes have been developed and assessed as source indicators using their diagnostic powers (DP). The effects of evaporative weathering and biodegradation on alteration of diamondoid distributions have been quantitatively investigated. Finally, a spill case study by statistical evaluation of diagnostic ratios using the "two-tailed" Student's tapproach is presented to illustrate the unique utility of diamondoids for correlation and differentiation of unknown spilled diesels.

High-performance liquid chromatographic separation of dihydropyrimidine racemates on polysaccharide-derived chiral stationary phases

The chromatographic behavior of a set of racemic dihydropyrimidines (DHPMs) has been evaluated on two polysaccharide-derived chiral stationary phases under normal phase conditions. One of these is coated, the other chemically immobilized. The outstanding solvent compatibility of the immobilized chiral stationary phase (CSP) permits the use of solvents such as ethyl acetate (EtOAc) that are unsuitable for coated supports, for which traditional 2-propanol:hexanes mixtures have been employed. Drastic changes in the chromatographic retention and resolution of DHPMs and, in general, in the separation performances have been observed for the two systems. From a practical point of view, EtOAc has been proven to be a better choice for the separation of this important class of compounds. By comparing molecules different in specific positions of their scaffolds, hypotheses concerning the role of individual chemical groups on retention and selectivity have been done. These effects have been quantified, in some cases, in terms of standard Gibbs energy variations. Even if no chromatographic measurements have been made under nonlinear conditions, clear indications of the potential use of immobilized chiral adsorptive media operated with EtOAc:hexanes mixtures for preparative separations of DHPMs have been evidenced.

Direct Probing of Sorbent−Solvent Interactions for Amylose Tris(3,5-dimethylphenylcarbamate) Using Infrared Spectroscopy, X-ray Diffraction, Solid-state NMR, and DFT Modeling

The sorbent-solvent interactions for amylose tris(3, 5-dimethylphenylcarbamate) (ADMPC) with five commonly used solvents, hexane, methanol, ethanol, 2-propanol (IPA), and acetonitrile (ACN), are studied using attenuated total reflection infrared spectroscopy (ATR-IR) of thin sorbent films, X-ray diffraction (XRD) of thin films, (13)C cross polarization/magic angle spinning (CP/MAS) and MAS solid state NMR of polymer-coated silica beads (commercially termed "Chiralpak AD"), and DFT modeling. The ADMPC-polymer-coated silica beads are used commercially for analytical and preparative scale separations of chiral enantiomers. The polymer forms helical rods with intra- and inter-rod hydrogen bonds (H-bonds). There are various nm-sized cavities formed between the polymer side-chains and rods. The changes in the H-bonding states of the C=O and NH groups of the polymer upon absorption of each of the five solvents at 25 degrees C are determined with ATR-IR. The IR wavenumbers, the H-bonding interaction energies, and the H-bonding distances of the polymer side-chains with each of the solvent molecules are predicted using the DFT/B3LYP/6-311+g(d,p) level of theory. The changes in the polymer crystallinity upon absorption of each solvent are characterized with XRD. The changes in the polymer crystallinity and the H-bonding states of C=O groups are also probed with (13)C CP/MAS solid-state NMR. The changes in the polymer side-chain mobility are detected using (13)C MAS solid-state NMR. The H-bonding states of the polymer change upon absorption of each polar solvent and usually result in an increase in the polymer crystallinity and the side-chain mobility. The polymer rods are reorganized upon solvent absorption, and the distance between the rods increases with the increase in the solvent molecular size. These results have implications for understanding the role of the solvent in modifying the structure and behavior of the polymer sorbents.

Quantitation of geometric isomers of a phosphodiesterase inhibitor in rat and monkey plasma using liquid chromatography–tandem mass spectrometry

Quantitation of geometric isomers of a phosphodiesterase inhibitor was required to determine the extent of interconversion following dosing of a single isomer in preclinical pharmacokinetic studies. Assays were developed for the simultaneous determination of Compound A (Fig. 1), 6-[1-methyl-1-(methylsulfonyl)ethyl-8(3-{(E)-2-(3-methyl-1,2,4-oxadiazol-5-yl)-2-[4-(methylsulfonyl)phenyl]ethenyl}phenyl)quinoline] and its geometric Z-isomer, Compound B, in plasma using liquid chromatography-tandem mass spectrometry. Sample clean-up was performed using a semi-automated liquid-liquid extraction procedure. Separation was achieved on a Phenomenex Synergi MAX-RP column. The method was validated in the linear range of 2-2000 ng/mL for Compound A and 0.5-500 ng/mL for Compound B in plasma and successfully applied to preclinical pharmacokinetic studies. Compound A was dosed in rats and Compound B in monkeys and the degree of conversion was determined by comparing the area under the curve. The relative amount of conversion was less than 1 and 10% in rats and monkeys, respectively. Because of the small amount of conversion and minor peak tailing of the dosed geometric isomer, the order of elution of the two analytes was important in order to achieve best quantitative results. The minor component needs to elute first; thus, a second assay was developed in which the order of elution was reversed. This was achieved by changing the mobile phase modifier.

Immobilized versus coated amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phases for the enantioselective separation of cyclopropane derivatives by liquid chromatography

The solvent versatility of Chiralpak IA, a new chiral stationary phase (CSP) containing amylose tris(3,5-dimethylphenylcarabamate) immobilized onto silica gel, is investigated for the enantioselective separation of a set of cyclopropane derivatives using ethyl acetate or dichloromethane (DCM) as non-standard mobile phase eluent and diluent, respectively in high-performance liquid chromatography (HPLC). A comparison of the separation of cyclopropanes on both immobilized and coated amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phases (Chiralpak IA and Chiralpak AD, respectively) in HPLC using a mixture of n-hexane/2-propanol (90/10 and 99/1, v/v) as mobile phase with a flow rate of 0.5 ml/min and UV detection at 254 nm, is demonstrated. The optimized method of separation is used for an online HPLC monitoring for the Rh(II)-catalyzed asymmetric intermolecular cyclopropanations in dichloromethane. Direct analysis techniques without further purification, workup or removal of dichloromethane were summarized. The method provides an easy and direct determination of the enantiomeric excess of the cyclopropanes and selectivity of the catalyst used without any further work up.

Characterization, weathering, and application of sesquiterpanes to source identification of spilled lighter petroleum products

Biomarkers have become increasingly important for identifying the source of spilled oil, due to their specificity and high resistance to biodegradation. The biomarkers most commonly used in forensic investigations are the high molecular weight (MW) tri- and pentacyclic terpanes and steranes. For lighter petroleum products such as jet fuels and diesels, the refining processes remove most high MW biomarkers from the original crude oil feedstock. The smaller bicyclic sesquiterpanes, however, are concentrated in these products. Sesquiterpanes are ubiquitous components of crude oils and ancient sediments. Examination of GC-MS chromatograms of these bicyclic biomarkers using their characteristic fragment ions (m/z 123, 179, 193, and 207) provides a highly diagnostic means for identifying spilled oil, particularly for lighter refined product samples that are difficult to identify by current techniques. In this work, sesquiterpanes in crude oils and petroleum products are identified and characterized, distributions of sesquiterpanes in oils and refined products are compared, the effects of evaporative weathering on sesquiterpane distributions are examined, and a methodology using diagnostic indices of sesquiterpanes is developed for oil correlation and differentiation. Finally, two case studies are presented to illustrate the unique utility of sesquiterpanes for fingerprinting and identifying unknown diesel spills.

Synthesis, enantiomeric resolution, F-18 labeling and biodistribution of reboxetine analogs: promising radioligands for imaging the norepinephrine transporter with positron emission tomography

Racemic and enantiomerically pure ((S,S) and (R,R)) 2-[alpha-(2-(2-[(18)F]fluoroethoxy)phenoxy)benzyl]morpholine ([(18)F]FRB) and its tetradeuterated form [(18)F]FRB-D(4), analogs of the highly selective norepinephrine reuptake inhibitor reboxetine (2-[alpha-(2-ethoxyphenoxy)benzyl]morpholine, RB), have been synthesized for studies of norepinephrine transporter (NET) system with positron emission tomography (PET). The [(18)F]fluorinated precursor, (S,S)/(R,R)-N-tert-butyloxycarbonyl-2-[alpha-(2-hydroxyphenoxy)benzyl]morpholine ((S,S)/(R,R)-N-Boc-desethylRB), was prepared by the N-protection of (S,S)/(R,R)-2-[alpha-(2-hydroxyphenoxy)benzyl]morpholine ((S,S)/(R,R)-desethylRB) with a tert-butyloxycarbonyl (Boc) group followed by enantiomeric resolution with chiral HPLC to provide both (S,S) and (R,R) enantiomers with >99% enantiomeric purity. These compounds were then used for radiosynthesis to prepare enantiomerically pure [(18)F]FRB and [(18)F]FRB-D(4) via the following three-step procedure: (1) formation of 1-bromo-2-[(18)F]fluoroethane ([(18)F]BFE or [(18)F]BFE-D(4)) by nucleophilic displacement of 2-bromoethyl triflate (or D(4) analog) with no-carrier added [(18)F]F(-) in THF; (2) reaction of [(18)F]BFE (or [(18)F]BFE-D(4)) with N-Boc-desethylRB in DMF in the presence of excess base; and (3) deprotection with trifluoroacetic acid. The racemates, (S,S) and (R,R) enantiomers of [(18)F]FRB and [(18)F]FRB-D(4) were obtained in 11-27% (decay corrected to the end of bombardment, EOB) in 120-min synthesis time with a radiochemical purity of >98% and specific activities of 21-48 GBq/micromol (EOB). The results of the whole-body biodistribution studies with (S,S)-[(18)F]FRB-D(4) were similar to those with (S,S)-[(18)F]FRB but showed relatively faster blood clearance and no significant in vivo defluorination. Positron emission tomography studies in baboon brain also showed that (S,S)-[(18)F]FRB-D(4) may be a potentially useful ligand for imaging NET with PET.

Chiral separation of amines by high-performance liquid chromatography using polysaccharide stationary phases and acidic additives

A dramatic and beneficial effect of ethanesulfonic acid (ESA) on the chiral HPLC separation of basic compounds was found. Using a single chiral column and a starting mobile phase, more than half of a diverse set of amines was baseline separated. Changing alcohol content and alcohol type increased the success rate. Methanesulfonic acid (MSA) proved even more successful. The mechanism of this unexpected finding appears to be a combination of ion-pair salt formation in the mobile phase and increased binding with the chiral stationary phase (CSP) arising from a localized decrease in pH.

Molecular tracers of saturated and polycyclic aromatic hydrocarbon inputs into Central Park Lake, New York City

Saturated hydrocarbons (SH) and polycyclic aromatic hydrocarbons (PAHs) have been quantified in a sediment core obtained from Central Park Lake, New York City. Radionuclides 210Pb and 137Cs were used to assign approximate dates to each individual section in the core. The dating profile based on 210Pb matches very well with the time constraints provided by 137Cs. Radionuclide-derived depositional dates are consistent with temporal information from the petroleum-indicator ratio U/R [the ratio of unresolved complex mixture (UCM)to saturated hydrocarbons in the aliphatic fraction] and the history of fuel use in the NYC area. Ratios of 1,7-dimethylphenanthrane (DMP) to 1,7-DMP plus 2,6-DMP [1,7/(1,7 + 2,6)-DMP], retene to retene plus chrysene [Ret/(Ret + Chy)], and fluoranthene to fluoranthene plus pyrene [FI/(FI + Py)] provide additional source discrimination throughoutthe core. Results show that the ratio U/R is sensitive to petroleum inputs and Ret/(Ret + Chy) is responsive to contributions from softwood combustion, whereas both FI/(FI + Py) and 1,7/ (1,7 + 2,6)-DMP can be used to discriminate among wood, coal, and petroleum combustion sources. Combined use of these ratios suggests that in New York City, wood combustion dominated 100 years ago, with a shift to coal combustion occurring from the 1900s to the 1950s. Petroleum use began around the 1920s and has dominated since the 1940s.

Integration of supercritical fluid chromatography into drug discovery as a routine support tool

Supercritical fluid chromatography (SFC) has been implemented within our group as a purity assessment and purification tool to complement high performance liquid chromatography (HPLC) for diastereomer and chiral separations. Using a novel strategy, rapid chiral screening has been implemented using short columns, high flow rates and fast gradients. A primary screen delivers a separation assessment using one solvent modifier (methanol) and four columns (Chiralpak AD-H and AS-H, and Chiralcel OD-H and OJ-H) run serially in a total of 24 min. A secondary screen then uses ethanol and isopropanol (IPA) modifiers across the same columns. The screens can be combined to run a sequence of samples overnight where each racemate is analysed over 80 min. The fast analytical screening and optimisation process enables rapid identification of the purification method. Furthermore, subsequent preparative chiral SFC has decreased the overall sample turnaround time for the Medicinal Chemist, delivering high fraction purities and acceptable recoveries, substantial operational cost savings and increased flexibility with respect to large scale purification feasibility in comparison to HPLC. SFC has been so successful it is now used as the primary method for chiral analysis and purification within our laboratory.

Characterization and Matching of Oil Samples Using Fluorescence Spectroscopy and Parallel Factor Analysis

A novel approach for matching oil samples by fluorescence spectroscopy combined with three-way decomposition of spectra is presented. It offers an objective fingerprinting based on the relative composition of polycyclic aromatic compounds (PACs) in oils. The method is complementary to GC-FID for initial screening of oil samples but can also be used for prescreening in the field, onboard ships, using a portable fluorescence spectrometer. Parallel factor analysis (PARAFAC) was applied to fluorescence excitation-emission matrixes (EEMs) of heavy fuel oils (HFOs), light fuel oils, lubricating oils, crude oils, unknown oils, and a sample collected in the spill area two weeks after the Baltic Carrier oil spill (Denmark, 2001). A total of 112 EEMs were decomposed into a five-factor PARAFAC model using excitation wavelengths from 245 to 400 nm and emission wavelengths from 280 to 550 nm. The PARAFAC factors were compared to EEMs of PAC standards with two to five rings, and the comparisons indicate that each of the factors can be related to a mixture of PACs with similar fluorescence characteristics: a mixture of naphthalenes and dibenzothiophenes, fluorenes, phenanthrenes, chrysenes, and five-ring PACs, respectively. Oils were grouped in score plots according to oil type. Except for HFOs and crude oils, the method easily discriminated between the four oil types. Minor overlaps of HFOs and crude oils were observed along all five PARAFAC factors, and the variability of crude oils was large along factor 2 due to a varying content of five-ring PACs. The spill sample was correctly assigned as a HFO with similar PAC pattern as oil from the cargo tank of the Baltic Carrier by comparing the correlation coefficient of scores for the oil spill sample and possible source oils (i.e., oils in the database).

Selectivity of amylose tris(3,5-dimethylphenyl-carbamate) chiral stationary phase as a function of its structure altered by changing concentration of ethanol or 2-propanol mobile-phase modifier

In a previous publication, solid-state NMR data showed that the structure of Chiralpak AD chiral stationary phase (CSP) was altered by changing the concentration of ethanol or 2-propanol modifier in the chromatographic mobile phase. This present paper reports the effect of the CSP structural change on chiral selectivity alpha. The enantiomers of a series of compounds were chromatographed using ethanol or 2-propanol in various concentrations as mobile-phase modifier and the alpha values were determined. Changes of alpha were observed for some enantiomeric pairs when ethanol and 2-propanol concentrations were varied. These data correlate with previous findings on the structural changes of the CSP. Not every enantiomeric pair showed changes in alpha as the alcohol concentration was varied, indicating that the chiral selectivity depends not only on the CSP's structure, but also on the structures of the analytes.

Enantiomerical excess determination, purification and biological evaluation of (3S) and (3R) α,β-butenolide analogues of isobenzofuranone

The asymmetric synthesis of isobenzofurane analogues, new potential antiviral agents, is reported. High performance liquid chromatography (HPLC) was the technique chosen to separate the enantiomers. We describe this chiral separation and then determine the enantiomerical excess. The biological results of each tested enantiomer are given.

Reversal of elution order for profen acid enantiomers in packed-column SFC on Chiralpak AD

Enantiomeric separations of four 2-substituted propionic acid drugs have been studied using packed-column supercritical fluid chromatography (SFC) with amylose tris(3,5-dimethylphenylcarbamate) coated on silica as support (Chiralpak AD). Under standard conditions (i.e., flow rate, 1.5 ml/min; column temperature, 30 degrees C; back-pressure, 150 bar), the order of elution could be reversed when the polar alcohol modifier methanol in carbon dioxide was replaced by 2-propanol for ibuprofen, ketoprofen, and naproxen. For flurbiprofen, with the highest selectivity factor, no reversal was observed, although selectivity was reduced significantly with higher alcohols. Naproxen and flurbiprofen were also investigated with 2-butanol and 2-pentanol. The former showed reversal of elution order but not the latter. For higher alcohol modifiers, including 2-propanol, the peak symmetry was poor but could be improved by addition of citric acid in the alcohol modifier. These results stress the importance to investigate enantiomer elution order during the development of enantioselective methods and when chromatographic conditions are optimized. Preliminary experiments with column temperatures over the range of -15 to 45 degrees C revealed that, in a few cases, reversal took place with a change in temperature only.

Definition and system implementation of strategies for method development of chiral separations in normal- or reversed-phase liquid chromatography using polysaccharide-based stationary phases

This paper proposes strategies in normal- and reversed-phase liquid chromatography (NP-HPLC or NPLC and RP-HPLC or RPLC), which were developed using three polysaccharide-based stationary phases. Those strategies are implemented in a knowledge-based system for the chiral separation of drug enantiomers. Each strategy includes a screening and an optimisation stage. The screening stage allows a fast evaluation of separation possibilities and enantioselectivity for many drugs in a short period of time, while the optimisation stage gives the opportunity to enhance, if needed, the initially obtained separation. Different examples demonstrate the effectiveness of the strategies for fast method development.